Five Star Race Car Bodies - new late model body …...9001:2015 QUALITY CERTIFIED 9001:2015 QUALITY...

9001:2015 QUALITY

CERTIFIED

9001:2015 QUALITY

CERTIFIED

9001:2015 QUALITY

CERTIFIED

9001:2015 QUALITY

CERTIFIED

FIVESTARBODIES.com CONNECT WITH TEAM FIVE STAR 10

CHEVROLET CAMARO11132-41051-X

TOYOTA CAMRY11712-41051-X

FORD MUSTANG11322-41051-X

» Fastest and easiest Late Model body to install »Common body uses 3 different noses for brand identity »Ultraglass two-piece greenhouse has built-in cowl » Flame-retardant resin used in Ultraglass greenhouse » Lower air dam molded in nose for correct aero equality »High-impact plastic fenders and quarter panels now available »Available in (4) colors: White

-wBLACK

-bBLUE-cb

RED-r

Welcome to the New Body Era. Racers are singing the praises of the New Late Model Body. It’s easier to mount, fits current chassis styles better, has a wider roof to fit full-containment seats, and has significant safety upgrades. The body has been proven on track to be aerodynamically equal to the 2004 ABC Body. Plus, these bodies draw a ton of attention from fans and sponsors alike.

new late model bodyBODY PACKAGES & OPTIONS

OVAL TRACK - - - - PAVEMENT

approved for 2021CONTACT YOUR LOCAL SERIES

FOR APPROVAL DATES

modern look, easier install ation, significant upgrades for the new era

ABC

LATE MODEL STOCK

S2

ARCA RACING SERIES

PAVEMENT

MODIFIED

SHORT TRACK TRUCK

STRAIGHT UP METAL

NOSES & BUMPER COVERS

BODY MOUNTING

BODY BRACING

BODY ADD-ONS

DRAG RACING

STREET STOCK

MD3 DIRT LATE MODEL

MD3 DIRT MODIFIED

DIRT GRAND NATIONAL

OFF ROAD

ROAD RACING

RACING WINDOWS

11* * Pricing sub jec t t o ch a nge w i t hou t no t ice * *

NEW LATE MODEL

NEW LATE MODEL

NEW LATE MODEL

PN -B-W -CB -R

re-skin body package 11002-10000-x $952 $992complete body package 11002-10600-x $2,735 $2,894

COM

PLET

E BOD

Y PA

CKAG

E CON

TENT

SRE

-SKI

N PA

CKAG

E CON

TENT

S Bumper Cover, Rear, high-impact plastic 11002-45051-x $119 $124Door, aluminum, left 11002-21033-xL $86 $86Door, aluminum, right 11002-21033-xR $86 $86Fender, high-impact plastic, left 11002-23051-xL $115 $119Fender, high-impact plastic, right 11002-23051-xR $115 $119Nose, high-impact plastic (specify make pg 10) 11xx2-41051-x $135 $140Quarter Panel, high-impact plastic, left 11002-27351-xL $118 $124Quarter Panel, high-impact plastic, right 11002-27351-xR $118 $124Rocker Panel, fi ts either side, high-impact plastic (2 required) 000-5501P-x $30 $35Rocker Panel, fi ts either side, high-impact plastic (entered twice to show package price) 000-5501P-x $30 $35

Cowl Air Insert, Ultraglass composite 661-5100A-x $44 $47Deck Lid Hold-Down Strip, aluminum XM 000-310H-x $6 $6Deck Lid, aluminum 661-310A-x $49 $49Greenhouse, Front with built-in cowl, hand-laid fi berglass 11002-51311-x $346 $384Greenhouse, Rear, hand-laid fi berglass 11002-51511-x $398 $440Hood, hand-laid fi berglass 11002-33011-x $198 $234Spoiler, Complete, 4pc, 1/4" poly blades, unpainted brackets, 6.5" x 60", 70˚ 11002-47367 $115 $115Windshield, mar-resistant coated, 1/8" 11002-63253 $340 $340Window, Rear, uncoated, 0.093" 11002-61151 $191 $191Windows, Quarter, mar-resistant coated, 0.093", left 11002-65153-L $48 $48Windows, Quarter, mar-resistant coated, 0.093", right 11002-65153-R $48 $48

(+/-) TO PKG $ CUSTOMIZE YOUR BODY PACKAGE HERERefer to change in cost column (+/-) to adjust package pricing.

INDIVIDUAL PART PRICING

-B-W -CB -R INDIVIDUAL PART PN -B-W -CB -R

$0 $0 Door, Aluminum, left, with fender mounting recess 11002-21233-xL $86 $86$0 $0 Door, Aluminum, right, with fender mounting recess 11002-21233-xR $86 $86

+$85 +$106 Fender, Ultraglass composite, left 11002-23013-xL $200 $225+$85 +$106 Fender, Ultraglass composite, right 11002-23013-xR $200 $225+$137 +$126 Greenhouse, Front, Ultraglass 11002-51313-x $483 $510+$101 +$89 Greenhouse, Rear, Ultraglass 11002-51513-x $499 $529+$110 +$140 Quarter Panel, Ultraglass, Left 11002-27313-xL $228 $264+$110 +$140 Quarter Panel, Ultraglass, Right 11002-27313-xR $228 $264+$12 +$7 Rocker Panels, fi ts either side, aluminum (2 required) 000-5501A-x $42 $42+$244 +$230 Hood, oversized, lightweight composite 11002-33011L-x $442 $464+$114 +$114 Window, Rear, mar-resistant coated, .093" 11002-61153 $305 $305

Spoilers: 60" wide 5" (90°) 5" (70°) 6-1/2" (90°) 6-1/2" (70°)+$0 +$0 Complete, aluminum 11002-47359 11002-47357 11002-47369 11002-47367 $115 $115+$7 +$7 Complete, aluminum, black 11002-47359-B 11002-47357-B 11002-47369-B 11002-47367-B $122 $122Replacement

Spoiler Blades & Brackets

Brackets, aluminum 11002-47369-1 11002-47367-1 11002-47369-1 11002-47367-1 $75 $75Brackets, aluminum, black 11002-47369-1B 11002-47367-1B 11002-47369-1B 11002-47367-1B $82 $82Blades, polycarbonate 11002-47359-2 11002-47357-2 11002-47369-2 11002-47367-2 $40 $40

MUST SPECIFY WHEN ORDERING: Body Panel Color (-x): -W =White; -B =Black; -CB =Blue; -R =Red; Nose Style: Chevrolet, Dodge, Ford, ToyotaNOTE: Unless specifi ed otherwise, all windows are pre-cut to fi t, beveled, and drilled with permanent black-out border.

(+/-) TO PKG $ INDIVIDUAL PART PRICING

+$0 Front Bumper, 1-3/4" round, .095" steel pg 110 11002-71185 $33+$8.10 Front Bumper, 1-3/4" round, .095" steel w/ 12" ext pg 110 11002-71188 $42+$29.70 Hood Pin Bracket, 3/4" aluminum pg 112 11002-34333 $64+$0 Hood Pin Kit, 3/8" pins (5pk) pg 112 803-A $33-$18 Hood Pin Kit, 3/8" pins (2pk) available in 4 colors new pg 112 10001-34033-x $13

(+/-) TO PKG $ INDIVIDUAL PART PRICING

+$0 Nose Screen, 1/4" spacing pg 122 660-4112 $47 +$4.50 Nose Screen, black, 1/4" spacing pg 122 660-4112-B $52+$4.50 Nose Screen, black, 3/16" spacing pg 122 660-4111-B $52+$9 Wear Strip Attaching Kit, aluminum pg 123 000-400K $44

CUSTOMIZE YOUR body mounting kit here Refer to change in cost column (+/-) to adjust package pricing.

body

mou

ntin

g ki

t

Adjustable Body Braces (x3 @ $35ea) pg 116 807-3 $105 Aluminum Nose Flap Braces, pair pg 116 11002-75333 $13.50 Door Vent Windows, pair pg 109 11002-66222 $28 Front Bumper Mounting Kit pg 111 802-5 $62 Front Bumper, 1-3/4", .065" steel pg 110 11002-71182 $33 Graphics, Nose ID Kit (specify make) pg 102 11xxx-44141 $32 Graphics, Tail ID Kit (specify make) pg 102 11xxx-44541 $30 Hood Pin Bracket, 3/4" steel pg 112 11002-34331 $31 Hood Pin Kit, 1/2" pins (5pk) pg 112 803 $33 Nose Screen, stainless, 3/16" pg 122 660-4111 $47

Rear Bumper Mounting Kit pg 111 802-2S $20 Rear Bumper, 1-3/4", .065" steel pg 110 11002-71682 $33 Rear Deck Mounting Kit pg 114 660-450-RDK $49 Rear Window Brace Kit (3pc) pg 117 11002-76133 $60 Right Side Door Support pg 115 11002-75533 $28 Wear Strip Attaching Kit, plastic new pg 123 00001-72651 $34 Wear Strips, plastic -B-W -CB -R-or -y -FG -FO -FR -FY pg 122 11002-41551-x $32 Window Installation Kit pg 109 805 $16 Windshield Brace Kit (3pc) pg 117 11002-76333 $60

all the components you'll need to mount your body like a proPN 11002-72520: PURCHASED INDIVIDUALLY = $746.50 | PURCHASED AS KIT WITH 10% DISCOUNT = $671.85

12

EVERYTHING YOU WILL NEED FOR A PERFECT, PRISTINE INSTALLATIONBODY MOUNTING components & ADD-ONS

FIVE STAR PREMIUM multi -grip RIVETS

NO OTHER RIVETS COME CLOSE IN QUALITYPull much tighter than other, cheaper rivets

DETAILS » PG 108

cold air boxesFLOW BENCH TESTED COWL INDUCTION

SYSTEMS FOR PEAK AIRFLOWDETAILS » PG 120

#2

#3

RADIATOR DUCTSINCREASE FRONT DOWNFORCE

DETAILS » PG 126

roof locating fixtureTHE FASTEST, CHEAPEST, MOST

HASSLE-FREE WAY TO MOUNT A BODY WITHOUT THE CHASSIS UNDERNEATH

DETAILS » PG 113

#1

FEATURED ADD-ONS= COMPONENT INCLUDED IN COMPLETE BODY MOUNTING KIT

□FRONT & REAR WINDOW BRACES

.......................pg 117

□ADJUSTABLE BODY BRACES

.......................pg 116

□NOSE FLAP BRACES ..................... pg 116

□WINDOW INSTALL KIT

...................... pg 109

□RIGHT SIDEDOOR SUPPORT

.......................pg 115

□DOOR VENT WINDOW ..................... pg 109

□REAR DECK MOUNTING KIT

.......................pg 114

□NOSE SCREEN ..................... pg 122

□FRONT BUMPER .......................pg 110

□FRONT BUMPER MOUNTING KIT

.......................pg 111

□REAR BUMPER ..................... pg 110

□REAR BUMPER MOUNTING KIT

.......................pg 111

□HOOD PIN BRACKET ......................pg 112

□HOOD PIN KITS .......................pg 112

new

□WEAR STRIPS & WEAR STRIP ATTACH KIT.............................pg 122 &123

new

□GRAPHIC ID KITS................ pg 102

#4

BODY MOUNTING TOOLS & DIMENSIONS

67"68" Front Greenhouse

Rear Greenhouse

A B

14" MIN

7-1/2"

10"

47" MIN

19-1/2"

31-3/8"

C/L FRONT AXLE

47" MAX

A

C/L REAR AXLE47" MAX

measured atspoiler base

57-1/2"

AB C

34-7/8" *

15-7/8" MAX

34-1/2" MAX34-1/4" MIN

26º 24-1/2"

15-3/4"

33" MIN33"

*Measured at the seam of bumper cover at deck lid intersection, +/-1/4"


Rear Greenhouse

A B

Offset/Straight Rail 47" 101"-106"66" MAX

CHASSIS ROOF HEIGHT TREAD WIDTH WHEELBASE


Rear Greenhouse

A B

Notes:1. If the Roof Height (10" back from windshield), Door Height (rear), Quarter Panel, or Bumper Cover Height dimensions are higher than the stated minimum dimensions, all four must increase by the same amount.2. Must fit centerline template within allowable tolerance.


Rear Greenhouse

A B

79-1/2 MAX"Body Width: Measured at wheel wells

68"Door to Door Width: Measured at A-posts and inside edged of doors, measured through carW

IDTH

S

A

67"Door to Door Width: Measured at B-posts and inside edged of doors, measured through car

C

B

Five Star Bodies are designed to maintain a perfect fi t with optimized aerodynamics. One way to ensure that is to make sure your body fi ts our template package.

Template, Complete Set, wood, Chevrolet Camaro 11132-82091 $192Template, Complete Set, wood, Toyota Camry 11712-82091 $192Template, Complete Set, wood, Ford Mustang 11322-82091 $192Set Includes: Body Centerline, Fenders, Nose Centerline, Nose Side-to-Side, Front & Rear Roofs Side-to-Side

Template, Master Set, wood, all models 11002-82091 $316

five star template sets

lmb rulebook»Details every aspect of the body,

including body styles, bodypanels, spoilers, windows, frontand rear overhangs, roof height,proper placement of templates,and more.»Download your copy at

FIVESTARBODIES.com

It is the responsibility of all competitors to present a car that fi ts the templates within

allowable tolerances and meets all dimensions as inspected by the “Referee.”

The Offi cial Referee 2.0 T-200-00 $1,020

**Not necessary for mounting a body. A body can be easily installed within specs by using the body dimension sheet and templates.


Rear Greenhouse

A B

14" MIN

7-1/2"

10"

47" MIN

19-1/2"

31-3/8"

C/L FRONT AXLE

47" MAX

A



57-1/2"

AB C

34-7/8" *

15-7/8" MAX

34-1/2" MAX34-1/4" MIN

26º 24-1/2"

15-3/4"

33" MIN33"



CHASSIS ROOF HEIGHT TREAD WIDTH WHEELBASE 79-1/2 MAX"Body Width: Measured at wheel wells


IDTH

S

A


C

BNotes:1. If the Roof Height (10" back from windshield), Door Height (rear), Quarter Panel, or Bumper Cover Height dimensions are higher than the stated minimum dimensions, all four must increase by the same amount.2. Must fit centerline template within allowable tolerance.

13 all BODY MOUNTING, BRACING & Add-on PRODUCT DETAILS >> PAGES 108-129

ABC

LATE MODEL STOCK

S2

ARCA RACING SERIES

PAVEMENT

MODIFIED

SHORT TRACK TRUCK

STRAIGHT UP METAL


BODY MOUNTING

BODY BRACING

BODY ADD-ONS

DRAG RACING

STREET STOCK

MD3 DIRT LATE MODEL

MD3 DIRT MODIFIED

DIRT GRAND NATIONAL

OFF ROAD

ROAD RACING

RACING WINDOWS

NEW LATE MODEL

NEW LATE MODEL

BODY MOUNTING TOOLS & DIMENSIONS


Rear Greenhouse

A B

14" MIN

7-1/2"

10"

47" MIN

19-1/2"

31-3/8"

C/L FRONT AXLE

47" MAX

A



57-1/2"

AB C

34-7/8" *

15-7/8" MAX

34-1/2" MAX34-1/4" MIN

26º 24-1/2"

15-3/4"

33" MIN33"



Rear Greenhouse

A B


CHASSIS ROOF HEIGHT TREAD WIDTH WHEELBASE


Rear Greenhouse

A B

Notes:1. If the Roof Height (10" back from windshield), Door Height (rear), Quarter Panel, or Bumper Cover Height dimensions are higher than the stated minimum dimensions, all four must increase by the same amount.2. Must fit centerline template within allowable tolerance.


Rear Greenhouse

A B

79-1/2 MAX"Body Width: Measured at wheel wells


IDTH

S

A


C

B

Five Star Bodies are designed to maintain a perfect fi t with optimized aerodynamics. One way to ensure that is to make sure your body fi ts our template package.

Template, Complete Set, wood, Chevrolet Camaro 11132-82091 $192Template, Complete Set, wood, Toyota Camry 11712-82091 $192Template, Complete Set, wood, Ford Mustang 11322-82091 $192Set Includes: Body Centerline, Fenders, Nose Centerline, Nose Side-to-Side, Front & Rear Roofs Side-to-Side

Template, Master Set, wood, all models 11002-82091 $316

five star template sets

lmb rulebook»Details every aspect of the body,

including body styles, bodypanels, spoilers, windows, frontand rear overhangs, roof height,proper placement of templates,and more.»Download your copy at

FIVESTARBODIES.com

It is the responsibility of all competitors to present a car that fi ts the templates within

allowable tolerances and meets all dimensions as inspected by the “Referee.”

The Offi cial Referee 2.0 T-200-00 $1,020

**Not necessary for mounting a body. A body can be easily installed within specs by using the body dimension sheet and templates.


Rear Greenhouse

A B

14" MIN

7-1/2"

10"

47" MIN

19-1/2"

31-3/8"

C/L FRONT AXLE

47" MAX

A



57-1/2"

AB C

34-7/8" *

15-7/8" MAX

34-1/2" MAX34-1/4" MIN

26º 24-1/2"

15-3/4"

33" MIN33"



CHASSIS ROOF HEIGHT TREAD WIDTH WHEELBASE 79-1/2 MAX"Body Width: Measured at wheel wells


IDTH

S

A


C

BNotes:1. If the Roof Height (10" back from windshield), Door Height (rear), Quarter Panel, or Bumper Cover Height dimensions are higher than the stated minimum dimensions, all four must increase by the same amount.2. Must fit centerline template within allowable tolerance.

100 100

high-impact plasticnoses & Bumper CoversWhen we say our high-quality products are Tested Tough, we mean it. No other nose and bumper cover combination on the market can put up with the abuse that a Five Star product can withstand. This saves you valuable time and money on repair and replacement. If you do need a replacement, you can be sure it will fi t perfectly every time.

» Made of our ultra-durable, high-impact proprietary plastic blend » Easy installation and repeatable fit of replacement parts » Stylish and aerodynamically sound

nose & Bumper Covergraphic id kitsNo one does Graphic ID kits like Five Star. Our kits are made of high-quality vinyl for spectacular adhesion, durability, and longevity – you won’t see any peeling or cracking. These kits are designed meticulously by our graphics department to give you the most realistic-looking brand identity on the market.

» Printed on high-quality, durable vinyl » Easy application

How to apply graphics:1. Dampen the back of the graphic to allow positioning. 2. Use a squeegee to gently force out air bubbles as you apply the graphics.3. Light heat from a heat gun allows better fi tting around sharp edges and curves.

AND VINYL GRAPHIC ID KITSplastic noses & bumper covers

101 101

ABC

LATE MODEL STOCK

S2

ARCA RACING SERIES

PAVEMENT

MODIFIED

SHORT TRACK TRUCK

STRAIGHT UP METAL


BODY MOUNTING

BODY BRACING

BODY ADD-ONS

DRAG RACING

STREET STOCK

MD3 DIRT LATE MODEL

MD3 DIRT MODIFIED

DIRT GRAND NATIONAL

OFF ROAD

ROAD RACING

RACING WINDOWS

NEW LATE MODEL

nose & bumper cover measurements

high-impact plasticnoses & Bumper CoversWhen we say our high-quality products are Tested Tough, we mean it. No other nose and bumper cover combination on the market can put up with the abuse that a Five Star product can withstand. This saves you valuable time and money on repair and replacement. If you do need a replacement, you can be sure it will fi t perfectly every time.

» Made of our ultra-durable, high-impact proprietary plastic blend » Easy installation and repeatable fit of replacement parts » Stylish and aerodynamically sound

nose & Bumper Covergraphic id kitsNo one does Graphic ID kits like Five Star. Our kits are made of high-quality vinyl for spectacular adhesion, durability, and longevity – you won’t see any peeling or cracking. These kits are designed meticulously by our graphics department to give you the most realistic-looking brand identity on the market.

» Printed on high-quality, durable vinyl » Easy application

How to apply graphics:1. Dampen the back of the graphic to allow positioning. 2. Use a squeegee to gently force out air bubbles as you apply the graphics.3. Light heat from a heat gun allows better fi tting around sharp edges and curves.


NOSES

Wid

th at

bot

tom

of

fend

er fl

ange

Wid

th at

hoo

d re

cess

Verti

cal h

eight

to h

ood

rece

ss (a

t cen

terli

ne)

Verti

cal h

eight

atbu

mpe

r lin

e

Fron

t ove

rhan

gof

air d

am

Heig

ht to

bot

tom

of

fend

er fl

ange

Verti

cal h

eight

at h

ood

and

fend

er ju

nctio

n

PART NUMBER DESCRIPTION A B C D E F G021-410-x MD3 '88 Monte 68-1/4 65 24 11-1/2 2 N/A 23140-410-x '92 Camaro 71 58-1/2 20 14-1/2 5-3/4 7 21150-410-W '93-'02 Camaro 76-1/2 57 17-3/4 11-1/2 3-1/4 12-1/2 18-3/411132-44141-x New LMB Camaro* 70-1/2 40-3/4 18 11-1/4 2-1/4 15-3/4 20-3/411322-44141-x New LMB Mustang* 70-1/2 40-3/4 18 11-1/4 2-1/4 15-3/4 20-3/411712-44141-x New LMB Camry* 70-1/2 40-3/4 18 11-1/4 2-1/4 15-3/4 20-3/421191-44141-x Silverado 68-1/4 37-1/2 24 9 3 20-1/4 1621721-44141-x Ram/Tundra 68-1/4 37-1/2 24 9 3 20-1/4 1621341-44141-x F-150 68-1/4 37-1/2 24 9 3 20-1/4 16330-410-x '96-'03 Grand Prix 72 53 18-1/4 11-1/4 2 13 20360-410-x Grand Prix 74-1/2 54-1/2 18-1/2 12 3 13 20410-410-W '97 Regal 71-1/4 60 19-1/2 10-1/2 4-1/2 11-1/4 18470-410-x ABC Charger 74-1/2 54-1/2 18-1/2 12 3 13 20510-410-x '88 Thunderbird 71-1/2 66 20-1/4 10-1/2 1-3/4 N/A 19-1/2530-410-W '97 Thunderbird 71-1/2 58 19 10-1/2 2-1/2 13-1/2 20550-410-x '03 Taurus 71 52-3/4 18-1/2 11-1/2 3 13 20570-410-x ABC Fusion 74-1/2 54-1/2 18-1/2 12 3 13 20600-410-x Classic '88 Monte 68-1/4 65 21-1/4 10-1/2 0 N/A 19-1/2610-410-W '94 Lumina 71 58 20 11-1/2 1-1/2 14-1/2 21-1/4620-410-x '95-'99 Monte 71-3/4 56-1/4 19-1/2 11 3-1/4 13-3/4 20639-410-x Monte Carlo 70-3/4 51-3/4 18-3/4 13-1/2 3-3/4 15-3/4 23640-410-x '03 Monte Carlo 70-1/2 52 18-3/4 12-1/2 2-3/4 13 20660-410-x ABC Chevrolet SS 74-1/2 54-1/2 18-1/2 12 3 13 20710-410-W '97 Cutlass 72-3/4 59-1/2 19-3/4 12 3/4 14 22720-410-x ABC Camry 74-1/2 54-1/2 18-1/2 12 3 13 20915-410-x Mini Stock Mustang 63-1/8 49 23 11 0 12-3/4 21-3/4

REAR BUMPER COVERS

Wid

th at

Dec

k Lid

Re

cess

Rear

Wid

th at

Botto

m of

Bum

per

Heig

ht at

Qua

rter

Pane

l Rec

ess

PART NUMBER DESCRIPTION H I J021-450-x MD3 '88 Monte 53-3/4 66-1/4 20-1/211002-44541-x All New LMB* 49-1/2 71 22140-450-x '92 Camaro N/A 61 14-1/4150-450-W '93-'02 Camaro 47-5/8 65-3/4 22-1/421001-44541-x Truck 61 69 23320-450-x '96-'03 Grand Prix 47-3/4 67 22410-450-W '97 Regal 54 61-1/2 21460-450-x All ABC 49-3/4 68 20-1/2530-450-W '97 Thunderbird 52 66-3/4 21550-450-x '03 Taurus 50 66 21620-450-x '95-'99 Monte 47-1/2 66-1/4 20-3/4630-450-x '03 Monte Carlo 47-3/4 61-1/2 20-1/4672-450-x LMSC 49-3/4 68 21-3/4710-450-W '97 Cutlass 49-1/2 65 21-1/2915-450-x Mini Stock Mustang N/A 62-1/2 16-3/4

These M E A S U R E M E N T S will help you to select high-impact plastic Five Star noses & bumper covers to retro-fi t your custom application.

*Also used for 2020 Late Model Stock Car *Also used for 2020 Late Model Stock Car

C

G

D E F

A

B

I

H

J

PN 460-450 fi ts all of our current body styles except Late Model Stock (which uses PN 672-450).

Camry, Chevrolet SS, Charger, Fusion, Grand Prix & Taurus Bumper Cover ID Graphics kits fi t bothPN 460-450 and PN 672-450.

102

CHEVROLET CAMARO -B -W -CB -R 11132-41051-x Nose $135 $14011132-44141 Nose ID Kit $32 $32

CHEVROLET CAMARO -B -W -CB -R 11002-45051-x Bumper Cover $119 $12411132-44541 Bumper Cover ID Kit $30 $30

FORD MUSTANG -B -W -CB -R 11322-41051-x Nose $135 $14011322-44141 Nose ID Kit $32 $32

FORD MUSTANG -B -W -CB -R 11002-41051-x Bumper Cover $119 $12411322-44541 Bumper Cover ID Kit $30 $30

toyota camry -B -W -CB -R 11712-41051-x Nose $135 $14011712-44141 Nose ID Kit $32 $32

toyota camry -B -W -CB -R 11002-41051-x Bumper Cover $119 $12411712-44541 Bumper Cover ID Kit $30 $30

FIVE STAR Plastic primera must-Use for painting Any five star plastic panel

» Specially-formulated for the plastic used on Five Star parts » (2) cans = (2) coats on: nose, bumper cover, both fenders,

quarter panels and rocker panels

PART # DESCRIPTION RACER

842 11.3 oz can $17

IF YOU ARE GOING TO PAINT YOUR PLASTIC PANELS, YOU MUST USE FIVE STAR PLASTIC

PRIMER, AND NO OTHER » There are plenty of primers on the market but the

plastic used in our parts is not the same plastic as used elsewhere in the automotive industry. USING ANY OTHER PRIMER WILL RESULT

IN SEVERE PAINT FLAKING » Before you paint, be sure you have your Five Star

Primer. Follow the directions on the can precisely and marvel at your perfect paint job.

five star quick tip:

NEW LATE MODEL BODY & 2020 LATE MODEL STOCK CAR

noses, bumper covers & graphic id kits

102

108 108

BODY MOUNTING componentsEVERYTHING YOU NEED TO FACILITATE A PROFESSIONAL BODY INSTALLATION

PN DESCRIPTION RACER

806 Drill Bit Kit $23

five star premiumrivets & washersthe best rivets on the market

» Five Star Premium Rivets prevent loose body panels by expanding in the hole and providing super-tight grip that won't spin out while drilling

» Grip range of up to 1/2" » Sold in quantities of (100) and (500); large head and

small head with choice of 1/8" unpainted or 3/16" painted(color matched to our body panels), or unpainted

» Five Star Aluminum Washers are available in (3) sizes and are oversized to fi t with the rivets and keep them tight no matter how much vibration

» Back-up Washers are recommended for attaching plastic body panels

heavy dutycleco kit & Pliers

rivet & clecodrill bit kit

» Clecos can be easily inserted with the cleco pliars to temporarily hold panels during the fi tting process until replaced with rivets when the fi t is perfect

» Choice of 1/8" 25-piece Cleco Kit or 3/16" 25-piece Cleco Kit

ideal for rivet and cleco installation » Slightly larger diameter hole than a standard 1/8" or 3/16" bit » Short drill shaft makes drilling in tight places easier » Kit includes: (2) 9/64" double-ended drill bits and

(2) #30 double-ended drill bitsPART # DESCRIPTION RACER

812 1/8" Single Spade Kit, long $24813 3/16" Single Spade Kit, long $24811 Cleco Pliers $14

FIVE STAR'S RIVETS pull much tighter than other, cheaper Rivets!

mul

ti-g

rip

rive

tsw

ashe

rs

Size/Description QTY SMALL PN LARGE PN RACER

3/16", color 100 814x-100S 814x-100L $133/16", unpainted 100 816-100S 816-100L $103/16" Long Shank ¹ 100 816A-100S n/a $153/16" Peel-style ² 100 816P-100S n/a $243/16", color 500 814x-500S 814x-500L $553/16", unpainted 500 816-500S 816-500L $431/8", unpainted 100 815-100S 815-100L $71/8", unpainted 500 815-500S 815-500L $29

Size/Description QTY TYPE PN RACER

1/8" 100 standard 817-100A $41/8" 500 standard 817-500A $143/16" 100 standard 818-100A $43/16" 500 standard 818-500A $163/16" 100 large 818-100AL $53/16" 500 large 818-500AL $17

¹ Use Long Shank rivets for fastening fender, door, and windshield post together² Peel Rivets do not require back-up washers. Use them in areas where there is no room to position a washer

was

hers

actu

al s

ize

show

n

Standard 1/8"

Standard 3/16"

Large3/16"

rive

tsac

tual

siz

e sh

own

Small Head

Large Head

Yellow Blue Red Black White Unpainted

109 109

ABC

LATE MODEL STOCK

S2

ARCA RACING SERIES

PAVEMENT

MODIFIED

SHORT TRACK TRUCK

STRAIGHT UP METAL


BODY MOUNTING

BODY BRACING

BODY ADD-ONS

DRAG RACING

STREET STOCK

MD3 DIRT LATE MODEL

MD3 DIRT MODIFIED

DIRT GRAND NATIONAL

OFF ROAD

ROAD RACING

RACING WINDOWS

NEW LATE MODEL

BODY MOUNTING

FITS THESE BODY STYLES: Late Model Body, 2020 LMSC

FITS THESE BODY STYLES: ABC, LMSC, Fiberglass Sportsman, Straight-up Metal, Street Stock, Pavement Modifi ed


11002-66222 Cut-to-fit,setof2 $28


000-6202 Oversized, set of 2 $28

Achieve ultimate aerodynamics » Molded vent windows give cars a proven performance

gain in the wind tunnel over fl at unmolded windows

» Oversized and cut-to-fi t options made of molded, mar-resistant coated polycarbonate

» EACH WINDOW WEIGHS UNDER A POUND

Fully Installed Door Vent WindowThe 11002-66222 Door Vent Window is

pre-cut-to-fi t for fast and easy installation

polycarbonatedoor vent windows

11002-66222

The Only way to install five star windows » Using proper hardware not only provides the perfect fi t,

but also helps the longevity of your window

» Kit includes: enough hardware to install a complete set of windows on one car

» (120) 6-32 1/2" & (16) 6-32 3/4" Flat Head Socket Screws (anodized to prevent rust), (136) 6-32 Nylon Locknuts, a Long-arm Hex Key and 9/64" Drill Bit


805 8.2 oz $16

five star windowinstallation kit

» 3/8" diameter steel bit, 1/4" shank » Use for countersinking installation

screws into polycarbonate

» Not required for pre-cut to fi t, beveled, and drilled windows


805-1 1/4" shank $18

WINDOW INSTALLATIONCOUNTERSINKDRILL BIT

IMPORTANT:USING RIVETS APPLIES TOO MUCH PRESSURE TO YOUR WINDOW AND WILL FRACTURE THE POLYCARBONATE

Fully Installed Door Vent WindowThe 000-6202 Door Vent Window isoversized; trim to fi t your application

000-6202

110 110

» Exactly contoured to the insides of our plastic noses and bumper covers for maximum protection, ease of installation and a fi nished appearance

» Formed from 1-3/4" OD round steel tubing » For a complete secure mount, it is

recommended to install your bumpers with Five Star's Bumper Front and Rear Mounting Kits


LATE MODEL BODY/2020 LMSC:

11002-71182 Front, .065" steel $3311002-71185 Front, .095" steel $3311002-71188 Front, .095" steel (12" ext right side) $4211002-71682 Rear, .065" steel $33 ABC/LMSC/STRAIGHT-UP:

660-7103 Front, .065" steel $33660-7103B Front, .095" steel $33660-7103C Front, .095" steel (12" ext right side) $41570-7503 Rear, .065" steel $33S2:

664-7103 Front, .065" steel $33664-7103B Front, .095" steel $33570-7503 Rear, .065" steel $33


STREET STOCK:

600-7103 ('88 Monte Carlo) Front, .065" steel $33600-7103B ('88 Monte Carlo) Front, .095" steel $33600-7501 ('88 Monte Carlo) Rear, .065" steel $3320002-71182 (Camaro Street Stock) Rear, .065" steel $33DIRT GRAND NATIONAL:

700-7103 Front, .065" steel $33700-7103B Front, .095" steel $33570-7503 Rear, .065" steel $33FIBERGLASS SPORTSMAN:

634-7103 (Monte Carlo) Front, .065" steel $33334-7103 (Grand Prix) Front, .065" steel $33630-7503 (Monte Carlo) Rear, .065" steel $33SHORT TRACK TRUCK:

21001-71162 (Common) Front, .065" steel $33T000-7503 (Common) Rear, .065" steel $33

formed steelFront bumpers& rear bumpers

steel bodymounting tabsEliminate hassle in mounting

» 25-piece kit includes enough lightweight weld-on tabs to install a complete body and weighs 5oz

» Makes mounting easier by positioning bracing and mounts right where you need them

» Designed to be welded onto chassis as a universal mount for many applicatoins

» Use for roof, cowl, deck lid, side bracing, and more PN DESCRIPTION RACER

807-4 25 piece kit $19

Fully Installed Tab

Actual Size Shown

Front, .095" steel with 12" extension (10 lbs)

Front, .095" steel (7.6 lbs)

Front, .065" steel (5.4 lbs)

Rear, .065" steel

Extension For Additional Right Front Protection

1/2"

1-1/8"

111 111

ABC

LATE MODEL STOCK

S2

ARCA RACING SERIES

PAVEMENT

MODIFIED

SHORT TRACK TRUCK

STRAIGHT UP METAL


BODY MOUNTING

BODY BRACING

BODY ADD-ONS

DRAG RACING

STREET STOCK

MD3 DIRT LATE MODEL

MD3 DIRT MODIFIED

DIRT GRAND NATIONAL

OFF ROAD

ROAD RACING

RACING WINDOWS

NEW LATE MODEL

FITS THESE BODY STYLES: New Late Model Body, ABC, 2020 LMSC, LMSC, S2, Short Track Truck, Fiberglass Sportsman, Straight-up Metal, Street Stock, Dirt Grand National

FITS THESE BODY STYLES: New Late Model Body, ABC, 2020 LMSC, LMSC, S2, Short Track Truck, Fiberglass Sportsman, Straight-up Metal, Street Stock, Dirt Grand National


802-5 Complete Kit $62802-4 Replacement Kit $42

Everything you need for a completeand securely Mounted Front Bumper

» Allows for precise adjustments to nose height » Strong components help resist damage » Complete Kit includes: (2) 3' sections of 3/4" round

tubing; (4) clevis, eye bolts & nuts; (2) 1-1/2" square pieces of square tubing; (2) pieces of fl at stock; 1/2" nuts & bolts, mounting tabs and (2) pivoting chassis mounts

» Replacement Kit include: (2) 1-1/2" square pieces of square tubing; (2) pieces of fl at stock; 1/2" nuts & bolts and mounting tabs

Complete Kit Fully Installed highlighted in orange

802-5 | Complete Kit

802-4 | Replacement Kit

FRONT BUMPERMOUNTING KIT

Everything you need for a complete and securely Mounted Rear Bumper

» Two Ways to Mount Rear Bumper to a Chassis

Height-Adjustable Kit: » Allows for several diff erent mounting options and pivots

to allow precise adjustments to the height of the rear bumper cover

» Kit includes: (2) pivoting chassis mounts; (1) 36" long 1-1/2" square piece of tubing; (2) pieces of fl at stock;(2) 1/2" nuts and bolts

Non-Adjustable Kit: » Make your bumper a bolt-on component: » Kit includes: (2) 3' long 1-3/4" thick pieces of round

tubing, (2) pieces of .120" thick square tubing and5/16" hex bolts & nuts


802-2S Height-adjustable Kit $20802-2 Non-adjustable Kit $19

Rear Bumper Fully Installedhighlighted in orange

rear BUMPERMOUNTING KIT

802-2S | Height Adjustable

802-2 | Non-Adjustable

BODY MOUNTING

112 112

aluminum & steelhood pin kitssecure your hood In style

» (5pk) 1/2" Kit includes: (5) lightweight aluminum pins, (5) aluminum scuff plates, (5) fl ip-over style steel clips (prevents from falling out), (10) jam nuts

» (5pk) 3/8" Kit includes: (5) lightweight aluminum pins, (5) aluminum scuff plates, (5) fl ip-over style steel clips (prevents from falling out), (10) jam nuts

» (2pk) 3/8" Kit includes: (2) newly improved lightweight gun-drilled aluminum pins (half the weight of standard), (2) aluminum scuff plates, (2) fl ip-over steel clips, (4) jam nuts, and comes in silver, black, blue and red


10001-34033 3/8" Pin Kit, silver (2 pack) $1310001-34033-B 3/8" Pin Kit, black (2 pack) $1310001-34033-R 3/8" Pin Kit, red (2 pack) $1310001-34033-CB 3/8" Pin Kit, blue (2 pack) $13803-A 3/8" Pin Kit (5 pack) $33803 1/2" Pin Kit (5 pack) $33803-PS 1/2"ScuffPlate,aluminum $2

803-A 3/8"

aluminum & steelhood pin bracketspre-formed to fit the nose

» Aluminum option weighs less than 2 lbs(less than half the weight of steel)

» Both options include welded-on tabs for hood pin placement

» Available in 1/2" and 3/4" options and will work for both 1/2" and 3/8" hood pins


LATE MODEL BODY/2020 LMSC:

11002-34333 3/4" OD, aluminum (common) $6411002-34331 3/4" OD, steel (common) $31ABC/LMSC/STRAIGHT-UP:

660-411A-HPB 3/4" OD, aluminum (excludes Ford) $63570-411A-HPB 3/4" OD, aluminum (Ford) $63660-411-HPB 3/4" OD, steel (excludes Ford) $31570-411-HPB 3/4" OD, steel (Ford) $31660-410-HPB 1/2" OD, steel (excludes Ford) $28570-410-HPB 1/2" OD, steel (Ford) $28S2:

664-411-HPB 3/4" OD, steel $31664-410-HPB 1/2" OD, steel $28


SHORT TRACK TRUCK:

21001-34131 1/2" OD, steel, common $28STREET STOCK:

600-410-HPB 3/4" OD, steel ('88 Monte Carlo) $3120002-34331 3/4" OD, steel (Chevrolet Camaro) $31DIRT GRAND NAT'L:

700-410-HPB 1/2" OD, steel (excludes Ford) $28703-410-HPB 1/2" OD, steel (Ford) $28FIBERGLASS SPORTSMAN:

634-410-HPB 1/2" OD, steel (Monte Carlo) $28334-410-HPB 1/2" OD, steel (Grand Prix) $26

10001-34033

10001-34033-CB

10001-34033-B

10001-34033-R

Hood Pin Kits now available with annodized finishandwithgun-drilledpins

all new

3/4"

1"

113 113

ABC

LATE MODEL STOCK

S2

ARCA RACING SERIES

PAVEMENT

MODIFIED

SHORT TRACK TRUCK

STRAIGHT UP METAL


BODY MOUNTING

BODY BRACING

BODY ADD-ONS

DRAG RACING

STREET STOCK

MD3 DIRT LATE MODEL

MD3 DIRT MODIFIED

DIRT GRAND NATIONAL

OFF ROAD

ROAD RACING

RACING WINDOWS

NEW LATE MODEL

steel tubinginstallation kit


819 11-pcs: 60" lengths $37

# Shape Dia Thickness

1 (3) round 3/8" .062"2 (3) square 1/2" .035"3 (2) round 1/2" .062"4 (3) square 3/4" .049"

Wide selection to cut as needed to fit anywhere on your race car

» 55 feet of .35" hard-to-fi nd, lightweight steel tubing designed especially for racing

» Will save at least 12 lbs over standard.065" steel tubing

» Kit includes various shapes and sizes in 60" lengths

Note: Red color shown for detail

roof locatingfixturethe fast & Easy way to mount your complete body without the chassis underneath

» This time-saving device has adjustable quarter panel arms and makes locating the roof on your chassis a simple process

» Allows exact fi t for wheel opening locations, body dimensions, and inspection templates to fi t series specs

» Prefi ts from the cowl to the bumper cover, then can belifted easily on top of the chassis for fi nal fi t

» Comes in a black powder-coat fi nish and includes roofbrackets, door height blocks and assembly instructions

FIXTURE BODY STYLE RACER809P Universal Short Track $641REPLACEMENT ROOF BRACKETS RACER11002-72231 New Late Model Body $6813002-72231 2020 Late Model Stock $68809-1P ABC/Straight-up Fiberglass $69809-2P Straight-up Metal $64809-3P Fiberglass Sportsman $64809-5P Late Model Stock Car $69809-6P S2 Sportsman $64REPLACEMENT DOOR HEIGHT BLOCKS RACER809-HB Common $2011002-72331 New Late Model Body/2020 LMSC $25

BODY MOUNTING

114 114

FITS THESE BODY STYLES: New Late Model Body, ABC, 2020 LMSC, LMSC, S2, Straight-up Metal, Dirt Grand National

PN KIT DESCRIPTION RACER

660-450-RDK Rear Deck Mounting Kit $49

PN INDIVIDUAL PARTS RACER

660-450-DLB Deck Lid Bracket $21802-3 Deck Lid Height Slider Kit $11000-310H Deck Lid Hold Down Kit $16

Provides the most aerodynamically sound shape for the tail of your race car

» Deck Lid Bracket (PN 660-450-DLB) supportsyour rear bumper cover by securing it to the quarter panel and chassis; weighs 36 oz

» Deck Lid Height Slider Kit (PN 802-3) allows for easy adjustment of spoiler height with 3-1/2"of deck lid height adjustability

» Deck Lid Hold-down Kit (PN 000-310H) allows for easy access to your fuel cell

Deck Lid Hold-Down Kit 000-310H

Steelrear deck mounting kit

aluminumdeck lid bracketsave weight without sacrificing strength

» Supports your rear bumper cover by securing it to the quarter panel and chassis

» Allows hood pin installation for easier access to fuel cell » Allows for height adjustability from chassis » Complete the combination with our 2 pack of hood pin kits

(see page 112)


11002-75633 Aluminum $33FITS THESE BODY STYLES: New Late Model Body, ABC, 2020 LMSC, LMSC, S2, Straight-up Metal, Dirt Grand National

Fully Installed 660-450-RDKhighlighted in orange

WEIGHS ONLY 17 OZ LESS THAN HALF THE WEIGHT OF STEEL

53-3/4"

2-3/8"

Deck Lid Bracket 660-450-DLB53-3/4"

2-1/4"

Deck Lid Height Slider

Kit 802-3

Deck Lid Bracket Attaching Pieces (not sold seperately)

3/4"24-1/4"

3/4"

6"

aluminumspoiler mounting kitThe Perfect package for a precise, secure spoiler installation

» Everything needed to cleanly mount the polycarbonate spoiler blade to the bracket, and the bracket to the bumper cover

» 76-piece kit contains (32) machined aluminum inner and outer washers, (22) fl at head socket screws and (22) locknuts


000-67K 76-piece Kit, 9 oz $33 Fully Installed spoiler also using807-3 Adjustable Body Braces(sold separately, see pg 116)

lower nosesupport bracketAchieve optimum aerodynamics and support

» Choose from a lightweight aluminum or steel bracket » 2-piece kit includes: (2) brackets with (2) pre-welded

on mounting tabs for ease of installation

» Mount underneath the lower nose valance for ultimate strength and support


11002-75733 Aluminum $4911002-75731 Steel $44

FITS THESE BODY STYLES: 2020 LMSC, New Late Model Body

aluminumdoor supportEasily adjust your right side door to the proper width

» Weighs under 2 lbs » Laser-cut aluminum

FITS THESE BODY STYLES: New Late Model Body, ABC, S2, Truck, Fiberglass Sportsman, Dirt Grand National


11002-75533 Aluminum Door Support $28

Fully Installed 11002-75533

Aluminum 11002-75733

Fully Installed underneath the lower nose valance.

(left side shown)

42-1/2"

42"

3-3/4" 2-1/2"

115 115

ABC

LATE MODEL STOCK

S2

ARCA RACING SERIES

PAVEMENT

MODIFIED

SHORT TRACK TRUCK

STRAIGHT UP METAL


BODY MOUNTING

BODY BRACING

BODY ADD-ONS

DRAG RACING

STREET STOCK

MD3 DIRT LATE MODEL

MD3 DIRT MODIFIED

DIRT GRAND NATIONAL

OFF ROAD

ROAD RACING

RACING WINDOWS

NEW LATE MODEL

aluminumspoiler mounting kitThe Perfect package for a precise, secure spoiler installation

» Everything needed to cleanly mount the polycarbonate spoiler blade to the bracket, and the bracket to the bumper cover

» 76-piece kit contains (32) machined aluminum inner and outer washers, (22) fl at head socket screws and (22) locknuts


000-67K 76-piece Kit, 9 oz $33 Fully Installed spoiler also using807-3 Adjustable Body Braces(sold separately, see pg 116)

lower nosesupport bracketAchieve optimum aerodynamics and support

» Choose from a lightweight aluminum or steel bracket » 2-piece kit includes: (2) brackets with (2) pre-welded

on mounting tabs for ease of installation

» Mount underneath the lower nose valance for ultimate strength and support


11002-75733 Aluminum $4911002-75731 Steel $44

FITS THESE BODY STYLES: 2020 LMSC, New Late Model Body

aluminumdoor supportEasily adjust your right side door to the proper width

» Weighs under 2 lbs » Laser-cut aluminum

FITS THESE BODY STYLES: New Late Model Body, ABC, S2, Truck, Fiberglass Sportsman, Dirt Grand National


11002-75533 Aluminum Door Support $28


Aluminum 11002-75733

Fully Installed underneath the lower nose valance.

(left side shown)

42-1/2"

42"

3-3/4" 2-1/2"

BODY MOUNTING

116 116

universal body bracingCOMPONENTS ESSENTIAL TO ACHIEVING ASTOUNDING AERO

aluminumnose flap bracesThe Best Way to brace your nose flap areas

» CNC laser-cut aluminum is pre-drilled for riveting to nose and for mounting body bracing

» Both braces work great with Five Star's telescoping body braces (PN 860)

» Each pair weighs less than a pound; more than twice the weight saving at less than half the cost of other braces on the market


000-500 Noseflapbrace,long,pair $39FITS THESE BODY STYLES: ABC, LMSC, Short Track Truck, Fiberglass Sportsman, Straight-Up Metal, Dirt Grand National


11002-75333 Noseflapbrace,short,pair $13.50FITS THESE BODY STYLES: New Late Model Body, 2020 LMSC, New Short Track Truck

000-500: Mount to inside of wear strips with a Five Star wear strip attach kit

11002-75333: Mount verticallyonnoseflap

adjustablebody bracesProvide Ultimate support for body panels

» Can be used anywhere on your car to allow forfi ne adjustments to meet templates and critical dimensions

» Easy installation with ends shaped for (2) rivets or included screw kit

» Adjustable: 8" to 10-1/2" » Features durable anodized black fi nish and

cadmium hardware

» Package of (2) weighs only a 1/2 lb


807-3 Body Braces, 2 pk $35

Braces are shown supporting a spoiler

Formed

polycarbonate body bracesThe perfect balance of rigidity, flexibility, and durability without excess weight

» Each lightweight brace weighs only 7 oz » Absorbs impact and allows body panels to fl ex upon

impact and return to original position and shape

» Kit includes: (7) clear polycarbonate braces and 1" x 2" aluminum mounting tabs

Braces are shown with protective masking.


804 Polycarbonate Braces $30

2"

9-1/2"

18-1/4"

9-7/8"

27"

2-1/2"

117 117

ABC

LATE MODEL STOCK

S2

ARCA RACING SERIES

PAVEMENT

MODIFIED

SHORT TRACK TRUCK

STRAIGHT UP METAL


BODY MOUNTING

BODY BRACING

BODY ADD-ONS

DRAG RACING

STREET STOCK

MD3 DIRT LATE MODEL

MD3 DIRT MODIFIED

DIRT GRAND NATIONAL

OFF ROAD

ROAD RACING

RACING WINDOWS

NEW LATE MODEL

BODY BRACING

aluminumwindow bracesmaximize airflow and Improve Safetywith ultimate support

» Designed to the exact contour of your Five Star windows » Made of premium high-strength, lightweight aluminum » Weighs less than 2 lbs » Flat black powder-coat fi nish » Foam-padded surface won't mar windows » Pre-drilled holes to mount adjustable bracing from the interior for added support to window

» Kit includes: (3) CNC-machined aluminum braces

Windshield Braces Fully Installed

Rear Window Braces Fully Installed

Photo shown uses Universal Body Bracing PN 807 (below). Adjustable Body Braces PN 807-3 (pg 116) may also be used for maximum strength and safety.

PN RACER

NEW LATE MODEL BODY:

11002-76333 Front Window 24-1/8"(C), 24-1/4" (L), 24-1/2" (R) $60

11002-76133 Rear Window 30-7/8"(C), 30-5/8" (O) $60

2020 LATE MODEL STOCK CAR:

13002-76333 Front Window 25-5/8"(C), 25-1/2" (L), 25-5/8" (R) $6011002-76133 Rear Window 30-7/8"(C), 30-5/8" (O) $60ABC/LMSC/STRAIGHT-UP METAL:

564-6301 Front Window 28-5/8" x 1" $85674-6101 Rear Window 32" x 1" $62S2 SPORTSMAN:

664-6301 Front Window 30-3/8" x 1" $62664-6101 Rear Window 36" x 1" $62ASPHALT MODIFIED:

020-6301 Front Window 26-1/2" x 1" $85020-6101 Rear Window 34" x 1" $62SHORT TRACK TRUCK:

21001-76333 Front Window 31-5/8"(C), 31-3/4" (L), 31-1/2" (R) $60

C=Center, L=Left, R=Right, O=outer, all 1" Wide

564-6301 Shown

aluminumcustom bracing kitbuild your own custom-length bracing

» Up to 2-1/2" of adjustability » Order as many tubing kits or end assemblies

as needed to custom brace your car

» Bolt-on or hose-clamp mount » Kit includes: (1) Aluminum Tubing Kit; (1) Threaded End

Assembly Kit; (1) Left and (1) Right 1/4-20 Re-usable TapAluminum Tubing:

» Kit includes (2) 7/16" x 3' holly hex rods » Cut to desired length and can be tapped easily

Threaded End Assemblies: weighs 7.5 oz » Easy installation with ends shaped specially for rivets » 6-piece kit includes (2) right and (2) left thread ends,

and (2) hose clamps


807 Complete Kit $62

REPLACEMENT PARTS RACER

807-1 Tubing Kit, 2-piece $30807-2 End Assemblies, 6-piece $30807LorR Tap, left or right $11

Fully Installed Custom Brace Kit

36"Aluminum Tubing

Threaded End Assemblies

Tap

28-5/8"

118 118

can be used anywhere bracing is neededSteel Kit:

» Made of high-quality lightweight steel weighingonly 0.508 lbs

» Adjustable from 26" to 30-1/2"

» Kit includes: (6) tubes, (6) jam nuts, and (6) tabs

Aluminum Kit: » Made of high-quality lightweight aluminum

weighing only 0.194 lbs

» Adjustable from 26" to 30-1/2"

» Kit includes: (2) tubes, (2) jam nuts, and (2) tabs


860 Steel, pkg of 6 $61860A Aluminum, pkg of 2 $29

Fully Installed Steel Kit

Aluminum Kit860-A

Steel Kit860

aluminum & steel

telescoping body brace kits

aluminum

body brace kitsstiffens flexible areas of the body to Maximize airflow around your car

» Five Star recommends bracing on these areas of your car for tracks 1/2-mile and larger

» CNC-machined, lightweight aluminium braces have pre-drilled holes in fl anges in the necessary locations to mount directly on the chassis


000-501 Speedway Brace Kit, 4-piece $6811002-75433 Quarter Panel Brace Kit, 2-piece $39

FITS THESE BODY STYLES: ABC, LMSC, S2, Straight-Up Metal, Dirt Grand National, New Late Model Body & 2020 LMSC

Quarter Panel Braces

*Fender Braces are not sold seperately

4"

12"

6-1/2"

26-1/4"

3-5/8"

Speedway Brace Kit: » 4-piece kit includes (2) quarter panels braces (that mount

approximately 6" back from the wheel opening and 2" up form the bottom ledge), and (2) fender braces that mount approximately 4-6" behind wheel opening

» Weighs only 1.5 lbs

Quarter Panel Brace Kit: » 2-piece kit includes (2) quarter panels braces, that mount

approximately 6" back from the wheel opening and 2" up from the bottom ledge

» Weighs only 1 lb

119 119

ABC

LATE MODEL STOCK

S2

ARCA RACING SERIES

PAVEMENT

MODIFIED

SHORT TRACK TRUCK

STRAIGHT UP METAL


BODY MOUNTING

BODY BRACING

BODY ADD-ONS

DRAG RACING

STREET STOCK

MD3 DIRT LATE MODEL

MD3 DIRT MODIFIED

DIRT GRAND NATIONAL

OFF ROAD

ROAD RACING

RACING WINDOWS

NEW LATE MODEL

aluminum fender-to-noseback-up plate kitsKeepS your nose attached after impact

» Reinforces the fl ange where the fenders mount to the nose » Pre-drilled holes for easy installation » Made of lightweight and durable high-quality aluminum » 4-piece kits include: (2) front and (2) rear plates

(enough for both sides)


11002-75133 New LMB / 2020 LMSC $20000-24B Other Body Styles* $21

000-24B

11002-75133

FITS THESE BODY STYLES: ABC, LMSC, S2, Straight-Up Metal, Dirt Grand National

aluminum greenhouse-to-quarterPanel back-up plate kitreinforce the seams where the reargreenhouse meets the quarter panels

» Universal fi t for all greenhouse-style quarter panels » Especially recommended with molded plastic quarter panels » Kits includes: (2) pre-cut strips of lightweight and

durable high-quality aluminum


000-27B 2-piece Kit $7FITS THESE BODY STYLES: New Late Model Body, ABC, 2020 LMSC, LMSC, S2, Short Track Truck, Straight-Up Metal, Dirt Grand National

high-impact plasticmd3 body bracesRigid, durable, light

» Each lightweight brace is 1-1/4"x 36", is .30" thick and weighs only 7 oz

» Constructed of the same specially-blended, high-impact plastic as our MD3 Noses

» Perfect for dirt cars » Trims to fi t your needs


040-8000 Body Brace, black $8040-8000-8 Body Brace, black, pkg of 8 $43

60"

1-1/2"

16-1/4"

17-1/2"

1"

1"

3/4"

13-1/4"

1"

1-1/4"36" BODY

BRACING

120 120

PUT THE FINISHING TOUCHES ON YOUR RACE CAR

cowl inductioncold air boxesflow bench tested for peak airflow

» Ultra lightweight, durable composite constructionis comparable in weight to carbon fi ber alternatives

» Maximum airfl ow using air fi lters as short as 3" without cfm loss

» Increased distributor and under-hood clearance » Fits a standard 14" fi lter element

4 Barrel Air Boxes: » Your choice of (2) angles to ensure a proper,

level fi t on your engine

» Feature a patented machined adapter ring for clean airfl ow, better fi t, and durability

» How to determine air box angle option:• Set car at proper ride height• Place angle fi nder on carburetor

» 3° Airbox is most commonly used for short track Late Models

» 3" tall fi lter element recommended

2BarrelOffsetAirBox: » Off set 2-barrel air box is for engines with

a larger setback

» Designed to position the air fi lter farther forward for optimal fl ow without obstructingthe cowl opening

» Fits a standard 3-1/2" x 14" fi lter element


000-5240 4Barrel,0°Angle(Offset) $360 000-5243 4 Barrel, 3° Angle (Standard) $360 000-5224 2 Barrel, standard $300000-5220 2Barrel,offset $300

000-5220

Offset Air Box Uses Standard Round Filters

000-5243000-5224

2 BBL AIR BOX IS DYNO TESTED“The results were outstanding! Five Star's

2bbl air box was 10 HP & 16 ft lbs of torque better than the old one!”

-Shane Harding, Harding Motorsports Chassis

FLOW BENCH PROVEN

Fully Installed Cold Air Box

4 BBL UNIQUE HIGH FLOW DESIGNCNC-machined aluminum ring

(lamintated into the air box) fits perfectly on carburator to maximize airflow

patented flow design

NOTE: For older style 51-series cold air boxes call Five Star 262.877.2171

Body Add-ons

aluminumcowl bracket tabscreate a positive seal by holding windshield flat at the cowl

» Kit includes (4) laser-cut aluminum, pre-drilled tabs » Fasten with screws or rivets and mount along fl ange

of Windshield Cowl Panel

» Hood Pins not included (accepts 3/8" or 1/2" Hood Pins) » Each tab weighs 0.5 oz » Kit included with cowl panels


000-510 Cowl Bracket Tabs $13

ultraglass compositecowl air insert & cowl air deflectormaximize airflow at the hood/windsheild junctionCowl Air Insert (661-5100A-X):

» Included with ABC Body Packages » Completes the Windshield Cowl Panel and ensures

cold air box installation is fast and easy

» Adjustable for desired air fl ow » Available in 5 colors: -B -CB -R -W -Y

» Note: For divsions that do not use Cold Air Boxes, the Closed Cowl Air Insert (661-5101A-X) option is available

CowlAirDeflector(000-5200A): » These black Ultraglass Composites body add-on connect the

Cold Air Box to the Windshield Cowl Panel

» Fits all air boxes styles listed on page 120 » 000-5100A-B available and fi ts older style 51-series air boxes

PN DESCRIPTION -B -W -CB -R -Y

000-5200A AirDeflector,round(black only) $51 n/a000-5100A-B AirDeflector,square(black only) $51 n/a661-5100A-X Cowl Air Insert, open $44 $47661-5101A-X Cowl Air Insert,closed $44 n/a

reflective heat shieldThe very best in heat deflection

» Refl ects at least 90% of radiant heat from engine, up to 500°F » Light-duty refl ective fi lm with self-adhesive fi berglass backing for

tear resistance, and for ease of application/removal

» Extremely versatile, cut and form to fi t many applications:


000-52HS Cold Air Box Kit, 4 oz $32000-5HS 5'x27" Length Sheet, 3 oz per ft $71

• All Cold Air Boxes• Foot Boxes• Fuel Filter Housings

• Interiors• Shock Canisters• And more

Fully Installed Cold Air Box Kit

000-52HS

5' Length Sheets000-5HS

FITS THESE BODY STYLES: New Late Model Body, ABC, S2, Straight-up Metal, Dirt Grand National

7"

Cowl Air Defl ector (000-5200A) Rounded Bottom

20"

Cowl Air Defl ector (000-5100A-B) Square Bottom

7-1/2"

20-1/8"

Cowl Air Insert (661-5100A-X)32-7/8"

4-1/4"

Closed Cowl Air Insert (661-5101A-X)

28-3/8"

3-7/8"

121 121

ABC

LATE MODEL STOCK

S2

ARCA RACING SERIES

PAVEMENT

MODIFIED

SHORT TRACK TRUCK

STRAIGHT UP METAL


BODY MOUNTING

BODY BRACING

BODY ADD-ONS

DRAG RACING

STREET STOCK

MD3 DIRT LATE MODEL

MD3 DIRT MODIFIED

DIRT GRAND NATIONAL

OFF ROAD

ROAD RACING

RACING WINDOWS

NEW LATE MODEL

aluminumcowl bracket tabscreate a positive seal by holding windshield flat at the cowl

» Kit includes (4) laser-cut aluminum, pre-drilled tabs » Fasten with screws or rivets and mount along fl ange

of Windshield Cowl Panel

» Hood Pins not included (accepts 3/8" or 1/2" Hood Pins) » Each tab weighs 0.5 oz » Kit included with cowl panels


000-510 Cowl Bracket Tabs $13

ultraglass compositecowl air insert & cowl air deflectormaximize airflow at the hood/windsheild junctionCowl Air Insert (661-5100A-X):

» Included with ABC Body Packages » Completes the Windshield Cowl Panel and ensures

cold air box installation is fast and easy

» Adjustable for desired air fl ow » Available in 5 colors: -B -CB -R -W -Y

» Note: For divsions that do not use Cold Air Boxes, the Closed Cowl Air Insert (661-5101A-X) option is available

CowlAirDeflector(000-5200A): » These black Ultraglass Composites body add-on connect the

Cold Air Box to the Windshield Cowl Panel

» Fits all air boxes styles listed on page 120 » 000-5100A-B available and fi ts older style 51-series air boxes

PN DESCRIPTION -B -W -CB -R -Y

000-5200A AirDeflector,round(black only) $51 n/a000-5100A-B AirDeflector,square(black only) $51 n/a661-5100A-X Cowl Air Insert, open $44 $47661-5101A-X Cowl Air Insert,closed $44 n/a

reflective heat shieldThe very best in heat deflection

» Refl ects at least 90% of radiant heat from engine, up to 500°F » Light-duty refl ective fi lm with self-adhesive fi berglass backing for

tear resistance, and for ease of application/removal

» Extremely versatile, cut and form to fi t many applications:


000-52HS Cold Air Box Kit, 4 oz $32000-5HS 5'x27" Length Sheet, 3 oz per ft $71

• All Cold Air Boxes• Foot Boxes• Fuel Filter Housings

• Interiors• Shock Canisters• And more

Fully Installed Cold Air Box Kit

000-52HS

5' Length Sheets000-5HS

FITS THESE BODY STYLES: New Late Model Body, ABC, S2, Straight-up Metal, Dirt Grand National

7"

Cowl Air Defl ector (000-5200A) Rounded Bottom

20"

Cowl Air Defl ector (000-5100A-B) Square Bottom

7-1/2"

20-1/8"

Cowl Air Insert (661-5100A-X)32-7/8"

4-1/4"

Closed Cowl Air Insert (661-5101A-X)

28-3/8"

3-7/8"

BODY ADD-ONS

122 122

» Height adjustable to seal nose to the track, optimizing aero and protection from wear

» CNC-machined from Five Star's exclusive,ultra-durable high-impact plastic

» 2-piece kits (fi t either side) are ready to install with Five Star Wear Strip Attach Kits

» Available in 10 colors:

high-impact plasticwear strips a winning combo of function and style

aluminum

upper & lowerNOSE SCREENS

» Frame is CNC-machined from lightweight quality aluminum

» Screen is high strength stainless steel (3/4" mesh is crimped, 1/4" is welded)

» Available unpainted or with durable satin black powder-coated fi nish

Nose Screen660-41112

Nose Screen81001-46433B

PN NOSE SCREEN DESCRIPTION WIDTH (Top)

WIDTH (Bottom) HEIGHT MESH RACER

021-4131 Street Stock, MD3 81-88 Monte Carlo, Upper 30-3/4" 29" 5-1/2" 3/16" $47021-4132 Street Stock, MD3 81-88 Monte Carlo, Upper 30-3/4" 29" 5-1/2" 1/4" $47600-4111 Street Stock, Classic 81-88 Monte Carlo, Lower 28-1/4" 28-1/4" 5-3/4" 3/16" $47600-4131 Street Stock, Classic 81-88 Monte Carlo, Upper 30" 30" 6" 3/16" $47630-4111 01 Monte Carlo, Lower 34" 34" 6" 3/16" $47660-4111 ABC/Dirt Grand National/LMSC/SU Metal, Lower 27-3/4" 27-3/4" 7-1/4" 3/16" $47660-4111-B ABC/Dirt Grand National/LMSC/SU Metal, Lower, Black 27-3/4" 27-3/4" 7-1/4" 3/16" $52660-4112 ABC/Dirt Grand National/LMSC/SU Metal, Lower 27-3/4" 27-3/4" 7-1/4" 1/4" $47660-4112-B ABC/Dirt Grand National/LMSC/SU Metal, Lower, Black 27-3/4" 27-3/4" 7-1/4" 1/4" $52664-4111 S2 Sportsman, Lower 27-1/8" 27-1/8" 7-1/2" 3/16" $47664-4111-B S2 Sportsman, Lower, Black 27-1/8" 27-1/8" 7-1/2" 3/16" $52664-4112 S2 Sportsman, Lower 28-1/8" 28-1/8" 5-3/4" 1/4" $47664-4112-B S2 Sportsman, Lower, Black 28-1/8" 28-1/8" 5-3/4" 1/4" $5281001-46433B Road Race/Short Track Truck, Lower, Black 31-1/2" 31-1/2" 6-1/4" 1/4" $52T230-4111 Short Track Truck, Chevrolet 30-1/3" 30-1/3" 6-1/2" 3/16" $47

PN DESCRIPTION DIMENSIONS RACER

11002-41551-x New Late Model Body & 2020 LMSC 116" x 1-7/8" $32000-400-x ABC, LMSC, Straight-up Metal, Dirt Grand Nat'l 112" x 2-3/4" $32664-400-x S2 111" x 3" $38600-400-x Classic Street Stock (n/a in Fluorescent Colors) 120" x 5" $41021-400-x MD3 Street Stock, '88 Monte Carlo 119" x 3" $3220002-41551-x MD3 Street Stock, Chevrolet Camaro 107" x 3" $32

11002-41551-x Shown

000-400-x Shown

-B-W -CB -R-or -y -FG -FO -FR -FY

123 123

ABC

LATE MODEL STOCK

S2

ARCA RACING SERIES

PAVEMENT

MODIFIED

SHORT TRACK TRUCK

STRAIGHT UP METAL


BODY MOUNTING

BODY BRACING

BODY ADD-ONS

DRAG RACING

STREET STOCK

MD3 DIRT LATE MODEL

MD3 DIRT MODIFIED

DIRT GRAND NATIONAL

OFF ROAD

ROAD RACING

RACING WINDOWS

NEW LATE MODEL

» Both kit options include everything you need for a full professional installation

» 25-piece Aluminum Kit includes lightweight aluminum inner and outer 1" diameter washers, nuts and bolts and weighs 12 oz

» 25-piece Plastic Kit includes ultra-durable plastic inner and outer 1" diameter washers, lightweight aluminum nuts and bolts and weighs only 7 oz

aluminum & plastic

wear strip attach kitsThe fastest, most secure way to attach wear strips

1" ACTUAL SIZE SHOWN

1" ACTUAL SIZE SHOWN

11002-41551-Y Yellow Wear Strips Fully Installed with 00001-72651 Wear Strip Attach Kit


000-400K Aluminum: 25 sets (Full Installation) $4400001-72651 Plastic: 25 sets (Full Installation) $34

FullyAssembled

Plastic

all new

LIGHTER AND HALF THE COST OF ALUMINUM KIT

Weighs 7oz

000-400-FG Flourescent Green Wear Strips Fully Installed with 000-400K Wear Strip Attach Kit

FullyAssembled Aluminum

Weighs 12 oz

BODY ADD-ONS

124 124

high-impact plastic

md3 rocker panels » Aerodynamically designed for the best side force » Adds structural integrity to side body panels » Measures 77-3/4" W x 7-1/4" H » Easy to mount, fi ts either side » Available in 10 colors -B-W -CB -R-or -y -FG -FO -FR -FY

PN DESCRIPTION RACER007-5500-x Rocker Panel $35

Polycarbonate

rub railprotect your vinyl without hiding it

» Attach to side of body using Five Star Premium Rivets to eliminate tire marks on fenders, doors, and quarter panels

» Ultra-durable polycarbonate to absorb impact » Can trim to fi t your application


000-2100 75" long $21 eaFully Mounted Polycarbonate Rub Rail

Fully Mounted Rocker Panel

77-3/4"

7-1/4"

75"

3-1/2"

125 125

ABC

LATE MODEL STOCK

S2

ARCA RACING SERIES

PAVEMENT

MODIFIED

SHORT TRACK TRUCK

STRAIGHT UP METAL


BODY MOUNTING

BODY BRACING

BODY ADD-ONS

DRAG RACING

STREET STOCK

MD3 DIRT LATE MODEL

MD3 DIRT MODIFIED

DIRT GRAND NATIONAL

OFF ROAD

ROAD RACING

RACING WINDOWS

NEW LATE MODEL

aluminumhood propa hassle-free way to work under the hood

» Improved design at a lower cost » Made of durable and strong machined, lightweight,

heavy-duty aluminum

» Perfect when used with a pair of hood hinges » Sold as a pair, (2) needed for hood installation


000-3400 Hood Prop, pair $64

aluminumhood hinge kitsCreate easier access to your engine compartment

» Two options available, each fabricated from high quality aluminum stock

» Universal design for easy installation on all bodiesLong Hinge:

» (1) Kit is required to complete the installation of a hood » Kit includes hinge, pin and clip assembly » Recommended for Five Star lightweight composite hood

Short Hinge: » (2) Hinge Kits are required to complete the installation of

a hood

» Kit includes: hinge, pin and clip assembly


000-33H Hood Hinge, short, aluminum $1611002-73333 Hood Hinge, long, aluminum $39000-33HP Replacement Pin & Clip $2.20

Fully Installed 000-33H



BODY ADD-ONS

126 126

flexibleradiator ductsExtremely durable with The Mostefficient air flow to your radiator

» Simple installation » Retains 100% functionality even after frontal impact » Effi cient air fl ow cools radiator » Size by radiator core (not cooling tank) » All include molded plastic radiator mounting fl ange » Nose Air Inlet Extension for 000-409 Radiator Ducts only

ABC/S2 RACER STYLE/SIZE NEW LATE MODEL RACER

000-409-1 $137 Griffin,22-3/8"x17-7/8" 11002-42120 $109

000-409-2 $137 Howe, 24-1/4" x 18-1/2" 11002-42121 $109

000-409-3 $137 Howe, 22-1/4" x 18-3/4" 11002-42122 $109

000-409-4 $137 C & R, 22-1/4" x 17-3/4" 11002-42123 $109

000-409-5 $137 C & R, 24-1/4" x 17-3/4" 11002-42124 $109

000-409-6 $137 Howe, 27-1/4" x 18-1/2" 11002-42125 $109

LMSC RACER STYLE/SIZE STREET STOCK RACER

672-409-6 $137 Howe, 27-1/4" x 18-1/2" 600-409-6 $126

N/A N/A Howe, 24-1/4" x 18-1/2" 600-409-2 $126


Street Stock (PN 600-409): » Flexible Radiator Duct

replaces rigid metal ductwork with a custom canvas bag and aluminum or plastic framing

» Fits Howe and other radiators with similarcore dimensions

plasticradiator ductsFor Maximum Cooling airflow and Front downforce

» Effi cient cooling allows for smaller radiator air intake opening, resulting in increased front downforce

» Multi-piece kit allows for completely universal mounting applications

» Access panel for easy debris clean-out » 100% positive seal to grill screen opening

000-408 (Short Track Bodies): » 6-piece design is easy to install and fi ts any

radiator off set, width, and angle

» Includes molded plastic radiator mounting fl ange and Nose Air Inlet Extension

» Kit weighs less than 13 lbs

11002-42151 (New Late Model Body, 2020 LMSC): » 5-piece design is easy to install and fi ts to any radiator off set » The Nose Air Inlet Extension is not needed for the New Late

Model Body and 2020 Late Model Stock Car Body

FITS THESE BODY STYLES: New Late Model, ABC, 2020 LMSC, LMSC, S2, Straight-up Metal, Street Stock


000-408 Universal Short Track Bodies $17911002-42151 New Late Model Body $147

000-408 Fully Installed

*NOTE: For complete installation guide visit FIVESTARBODIES.com/downloads

11002-42151 Fully Installed

127 127

ABC

LATE MODEL STOCK

S2

ARCA RACING SERIES

PAVEMENT

MODIFIED

SHORT TRACK TRUCK

STRAIGHT UP METAL


BODY MOUNTING

BODY BRACING

BODY ADD-ONS

DRAG RACING

STREET STOCK

MD3 DIRT LATE MODEL

MD3 DIRT MODIFIED

DIRT GRAND NATIONAL

OFF ROAD

ROAD RACING

RACING WINDOWS

NEW LATE MODEL

wire-reinforced plasticbrake cooling hoses

» Choice of Standard Temperature (Neoprene) Hose orHigh Temperature (Silicon) Hose in both 3" and 4" diameters

PN MATERIAL TEMP DIA. LENGTH RACER

000-325ST Neoprene 350˚F 3" 10' $70000-325HT Silicon 600˚F 3" 11' $114000-425ST Neoprene 350˚F 4" 10' $85000-425HT Silicon 600˚F 4" 11' $135

High Temperature (Silicon) HoseStandard Temperature (Neoprene) Hose

plasticbrake duct kitsProvide peak airflow to cool your brakes

» Choice of (2) styles: Single or Double » Universal fi t for all noses at correct angle; fi ts either side » Single duct can use 3" or 4" tubing; Double duct

uses 3" tubing

» Crimped 3/16" stainless steel screen keeps debris out » Each kit includes pre-cut stainless steel screen,

rivets and washers


000-412D Single $28000-411D Double $28

FITS THESE BODY STYLES: New Late Model Body (Single Only) ABC, 2020 LMSC (Single Only), LMSC, S2, Short Track Truck, Fiberglass Sportsman, Straight-up Metal, Street Stock

Single Duct000-412D

*Does not fi t Late Model Body or

2020 LMSC

Double Duct000-411D

plasticNose air inlet extensionincrease Your Nose's rigidity

» Molded Plastic construction and weighs less than 2 lbs » Ideal for racers who build their own aluminum radiator box » Item already included with 000-408 Molded Plastic

Radiator Duct and 000-409 Flexible Radiator Duct


000-409-NP Air Inlet Extension $29FITS THESE BODY STYLES: ABC, LMSC, S2, Straight-up Metal

NOTE: Front Opening Dimensions are 26-1/2" x 6-1/4"

6-1/2"

6-1/2"

5-1/2"

4-1/2"

5" 2-1/2"

7-3/4"4-1/4"

9-1/4"

6-1/2"

5-1/4"

4"

2-1/3"

9-1/2"

31-1/4"

BODY ADD-ONS

128 128

wide angleracing mirrorsget the clearest view of your competition

» Optically superior, low-distortion lightweight polycarbonate version weighs only 14.3 oz

» Heavy-duty aluminum frame » All mirrors included bracket kit, making for easy

installation on any chassis

» ALL NEW COST EFFECTIVE convex glass mirror weighs 19.6 oz with lightweight brackets


00001-85020 Convex, glass $55820-Split Split View, polycarbonate $86820 Curved, polycarbonate $86820-Flat Flat, polycarbonate $86820-B Replacement Bracket $9

Replacement Bracket820-B

Curved for Optimum Viewing Angle

all new

Flat Mirror820

Split Mirror820-Split

Curved Mirror820

Convex Mirror 00001-85020

17-3/4"

2-1/2"

4-1/4"

4-1/4"

3/4" 3"

17-5/8"

3"

17-5/8"

3-1/4"

17-5/8"3"

THE OFFICIAL REFEREE 2.0USED BY TRACKS AND ASSOCIATIONS THROUGHOUT NORTH AMERICA FOR BODY TECH INSPECTION

» New upgrades included:• Laser pointer for more accurate measurement of front

overhang and engine setback• Magnetic, tinted polycarbonate wheel plates for better

attachment to wheels

» Designed by and exclusively available through Five Star » Includes Tech Inspector's checklist » NOT NECESSARY FOR mounting a body. A body can

easily be installed within specs by using the body dimensions sheets and templates.

PN DESCRIPTION RACERTT-200-00 Referee 2.0 $1,020ITEMS TO UPGRADE CURRENT REFEREE RACERTT-200-WL Wheel Locator, w/ magnets (set of 4) $89TT-200-LB Laser Measurement Assembly $150

Laser Measurement AssemblyRoof height tube assembly & chain not included in separate upgrade piece

TT-200-LB

Wheel Locatorwith Magnets

TT-200-WL

Easier, More Accurate Front Overhang Measurement

Measures Engine Setback

all new

For Referee Replacement parts call Five Star 262.877.2171

129 129

ABC

LATE MODEL STOCK

S2

ARCA RACING SERIES

PAVEMENT

MODIFIED

SHORT TRACK TRUCK

STRAIGHT UP METAL


BODY MOUNTING

BODY BRACING

BODY ADD-ONS

DRAG RACING

STREET STOCK

MD3 DIRT LATE MODEL

MD3 DIRT MODIFIED

DIRT GRAND NATIONAL

OFF ROAD

ROAD RACING

RACING WINDOWS

NEW LATE MODEL

BODY ADD-ONS

wide angleracing mirrorsget the clearest view of your competition

» Optically superior, low-distortion lightweight polycarbonate version weighs only 14.3 oz

» Heavy-duty aluminum frame » All mirrors included bracket kit, making for easy

installation on any chassis

» ALL NEW COST EFFECTIVE convex glass mirror weighs 19.6 oz with lightweight brackets


00001-85020 Convex, glass $55820-Split Split View, polycarbonate $86820 Curved, polycarbonate $86820-Flat Flat, polycarbonate $86820-B Replacement Bracket $9

Replacement Bracket820-B

Curved for Optimum Viewing Angle

all new

Flat Mirror820

Split Mirror820-Split

Curved Mirror820

Convex Mirror 00001-85020

17-3/4"

2-1/2"

4-1/4"

4-1/4"

3/4" 3"

17-5/8"

3"

17-5/8"

3-1/4"

17-5/8"3"

THE OFFICIAL REFEREE 2.0USED BY TRACKS AND ASSOCIATIONS THROUGHOUT NORTH AMERICA FOR BODY TECH INSPECTION

» New upgrades included:• Laser pointer for more accurate measurement of front

overhang and engine setback• Magnetic, tinted polycarbonate wheel plates for better

attachment to wheels

» Designed by and exclusively available through Five Star » Includes Tech Inspector's checklist » NOT NECESSARY FOR mounting a body. A body can

easily be installed within specs by using the body dimensions sheets and templates.

PN DESCRIPTION RACERTT-200-00 Referee 2.0 $1,020ITEMS TO UPGRADE CURRENT REFEREE RACERTT-200-WL Wheel Locator, w/ magnets (set of 4) $89TT-200-LB Laser Measurement Assembly $150

Laser Measurement AssemblyRoof height tube assembly & chain not included in separate upgrade piece

TT-200-LB

Wheel Locatorwith Magnets

TT-200-WL

Easier, More Accurate Front Overhang Measurement

Measures Engine Setback

all new

For Referee Replacement parts call Five Star 262.877.2171

carbon fi ber fl at sheets2'x4' & 4'x8' sheets ready to cut & fit

FIVE STAR Plastic primera must-Use for painting Any five star plastic panel

» Specially-formulated for the plastic used on Five Star parts » (2) cans = (2) coats on: Nose, Bumper Cover, Fenders,

Quarter Panels and Rocker Panels

IF YOU ARE GOING TO PAINT YOUR PLASTIC PANELS, YOU MUST USE FIVE STAR PLASTIC

PRIMER, AND NO OTHER » There are plenty of primers on the market but the

plastic used in our parts is not the same plastic as used elsewhere in the automotive industry. USING ANY OTHER PRIMER WILL RESULT

IN SEVERE PAINT FLAKING » Before you paint, be sure you have your Five Star

Primer. Follow the directions on the can precisely and marvel at your perfect paint job.

five star quick tip:

ALWAYS AVOID USING ABRASIVE CLEANERS & CHEMICAL SOLVENTS WHICH COULD CAUSE A

REACTION TO OUR UV AND ANTI-FOG COATINGS » If surface is dirty, fi rst use spray for cleaning, then re-spray and wipe clean

» Use a microfi ber towel for best, streak-free fi nish

» Never scrub your windows with brushes or other devices that may result in scratches and/or gouge your window

five star cleaning tips:

five star plastic window cleanerThe Top Choice for a clean, clear view of the track

» Anti-static, anti-fog, non-streaking foam » Specially formulated to clean all clear plastics » Repels fi nger smudges, dirt, dust, and grime » Contains no chemicals or abrasives that will

cause damage to plastic


843 19 oz can $ 9.95

new foam

formula


842 11.3 oz can $17

100% CARBON FIBER FLAT SHEET blends:• Flat sheets allow you to custom fi t to your needs• Ideal strength-to-weight ratio• Excellent vibration dampening characteristics• Perfect for interior panels• Laminated for additional strength and durability

COSMETIC CARBON FIBER FLAT SHEETS• Flat sheets allow you to custom fi t to your needs• Low-cost alternative to 100% carbon fi ber• Same great look as carbon fi ber• Perfect for interior panels• Laminated for additional strength and durability

CARBON FIBER COSMETIC SHEETSPART # THICKNESS/SIZE RACER

090-04412 .040"2'x4'(3)carbonfiber/e-glass/cosmeticcarbonfiber $107090-00412 .040"4'x8'(3)carbonfiber/e-glass/cosmeticcarbonfiber $395090-00612 .062"4'x8'(3)carbonfiber/e-glass/cosmeticcarbonfiber $450090-00421 .040"4'x8'(3)carbonfiber/e-glass/carbonfiber $520

100% CARBON FIBER SHEETSPART # THICKNESS/SIZE RACER

090-04430 .040" 2'x4'(3)carbonfiber/carbonfiber/carbonfiber $176090-00220 .028"4'x8'(2)carbonfiber/carbonfiber $475090-00430 .040" 4'x8'(3)carbonfiber/carbonfiber/carbonfiber $650

3-1/4"

Five Star Race Car Bodies - new late model body …...9001:2015 QUALITY CERTIFIED 9001:2015 QUALITY...

Documents

Transcript of Five Star Race Car Bodies - new late model body …...9001:2015 QUALITY CERTIFIED 9001:2015 QUALITY...