Fittings. Made. Easy.€¦ · 316 Stainless Steel Fittings Flared Fittings TX TX Flared Fittings...

OmegaOne

Fittings. Made. Easy.

AMFM Braid BandsStainless Steel Tubeand Pipe Fittings

Table of Contents

Bulkhead LocknutOD Socket-Weld x Male FlareFlare Nut (JIC)Flare Sleeve (JIC)CapFlare (JIC) Hex UnionLarge Hex UnionMale Connector Male Connector LongFemale Connector Tube End (JIC) ReducerPlugFlare (JIC) Union Elbow90° Male Elbow90° Male Elbow Long90° Male Elbow Extra Long90° Female Elbow45° Male ElbowFlare Union Elbow 45°Male Branch TeeFemale Branch TeeUnion TeeMale Run TeeFemale Run TeeBulkhead UnionBulkhead Union Elbow45° Bulkhead Union ElbowBulkhead Branch TeeBulkhead Run TeeMale JIC Bulkhead ConnectorFemale JIC Bulkhead ConnectorStraight Thread O-Ring ConnectorStraight Thread O-Ring Ext. Connector90° Swivel Nut ElbowSwivel Nut 45° ElbowSwivel Nut Male Branch TeeSwivel Nut Run TeeStraight Thread O-Ring 90° ElbowStraight Thread O-Ring 45° ElbowStraight Thread O-Ring Branch TeeStraight Thread O-Ring Run TeeElbow 90 JIC Swivel/MaleSwivel Nut UnionSwivel Straight Thread ConnectorSwivel Female ConnectorSwivel Connector

BN403TX-NTX-STX-ZTX-UTX-LHUTX-CTX-LCTX-FCTX-TERTX-PTX-ETX-METX-LMETX-LLMETX-FETX-ME-45°TX-E-45°TX-TTMTX-TTFTX-TTX-TMTTX-TFTTX-BUTX-BETX-BE-45°TX-BBTTX-BRTTX-BFCTX-BMCTX-GCTX-LGCTX-SETX-SE-45°TX-SBTTX-SRTTX-GETX-GE-45°TX-GBTTX-GRTJS-MEJS-JSJS-GCJS-FCJS-C

Bulkhead LocknutCap Assy.NutSleeveUhion AdapterSmall Hex UnionLarge Hex UnionMale ConnectorFemale ConnectorReducerPlug90° Union Elbow90° Male Elbow90° Male Elbow Long90° Male Elbow Extra Long90° Female Elbow45° Male ElbowMale Branch TeeFemale Branch TeeUnion TeeMale Run TeeFemale Run TeeBulkhead Union90° Bulkhead Union ElbowBulkhead Union AdapterStraight Thread O-Ring ConnectorStraight Thread O-Ring Ext. Connector90° Swivel Nut ElbowSwivel Nut 45° ElbowSwivel Nut Run TeeStraight Thread O-Ring 90° ElbowStraight Thread O-Ring 45° ElbowStraight Thread O-Ring Branch TeeStraight Thread O-Ring Run Tee

TXFlared Fittings Flareless Fittings

F

Fittings. Made. Easy.800.333.2636

OmegaOne PageDescription Description Page

306...318319304-C24032403-LH24042404-L240524062408250025012501-L2501-LL2502250325042601260226032605260627002701270227032704270527066400-06400-L6500650266006602680168026803680465016565640265066505

Airway

WLN...BTXTXFNTXHTXLHTXFTXFFTXGTXTRBTXPNTXETXCTXCCTXCCCTXDTXVTX...STXOTXJTXRTXMTXWTXWETXWNTXWJTXWJJTXWGXTWFTXF5XFF5XC6XV6XS6XR6XC5XV5XS5XR5XX6EFHX6F650XG6XJX6

Parker

BN...JNJSJZJUJLHUJCJLCJECJTERJPJ-EJMEJLME...JFEJME-45°...JTTMJTTFJTJTMTJTFTJBUJBEJBE-45°JBBTJBRTJBFCJBCJGCJLGCJSEJSE-45°JSBTJSRTJGEJGE-45°JGBTJGRTJSMEJSUJSGCJSFCJS-C

SSP

51860...515315153351532515015151951500...5150351534515185150551504......5150651508...51512515135151051511515145152051507515095152351516......5152551526515215152251524...51527515285152951530...............

MS

080118...070110070115070112070101070119070102071802070103...070109070201070202 071502...070203070302071502070425070427070401070424070425070601070701070801070959070958......070120070120070221070321070433070432070220070320070429070428...............

SAE

BNF-ZF-NF-SF-TXUF-UF-LHUF-CF-FCF-TERF-PF-EF-MEF-LMEF-LLMEF-FEF-ME-45°F-TTMF-TTFF-TF-TMTF-TFTF-BUF-BEF-TX2UF-GCF-LGCF-SEF-SE-45°F-SRTF-GEF-GE-45°F-GBTF-GRT

OmegaOne

306C304-CC318C319C2402C2403C2403-LHC2404C2405C2406C2408C2500C2501C2501-LC2501-LLC2502C2503C2601C2602C2603C2605C2606C2700C2701C2707C6400C6400-LC6500C6502-45C6602C6801C6802-45C6803-NWOC6804-NOW

Airway

WLNFNUBUTUXHBUHBULHBUFBUGBUTRBUPNUEBUCBUCCBUCCCBUDBUVBUSBUOBUJBURBUMBUWBUWEBUXH2BUF5BUFF5BUC6BUV6BUR6BUC5BUV5BUS5BUR5BU

Parker

BNMZMNMSMJ-UMUMLHUMCMFCM-TERMPMEMMEM-LMEM-LLMEMFEMME-45MTTMMTTFMTMTMTMTFTMBUM-BEMJ-BUMGCM-LGCMSEM-SE-45MSRTMGEM-GE-45MGBTMGRT

SSP

51860518905182351825...51814518565181951816...518915182051815......518135181751818518215181151824518225181251855...518435189351852...5185451839518425184151892

MS

080118080112080110080115A080119080101 080119 080102080103080123080109080201080202......080203080202080425080427080401080424080426080601080424080424080120...080221080424080432080320080320080429080428

SAE

67788991010111112121313NR14151516161717181819NR20202121222323242425252626272728282929

3031NRNR323333343435353637NRNR3838393940404141NR4243NR44NR4545464647

AMFM Braid Bands, AMFM Wrapped Bands, AMFM Bulk Coil & Weld Fittings on page 66.

Table of Contents

Anchor CouplingMale NPT to Male Straight ThreadCoupling - or - UnionPipe Nipple/Hex NippleLong Pipe NippleAdapter/Reducing AdapterBushing/Pipe Thread ReducerHex Head PlugHollow Hex Pipe Plug90° Male Pipe Elbow90° Street Elbow45° Street Elbow90° Female Elbow45° Female Pipe ElbowMale Pipe TeeMale Run TeeMale Branch TeePipe TeePipe to Straight Thread Male AdapterPipe to Straight Thread Female AdapterStraight Thread PlugHollow Hex Straight Thread PlugMale to Female Straight Thread90° Straight Thread Female ElbowFemale ElbowMale Pipe AdapterFemale Pipe AdapterFemale Pipe ElbowMale Pipe ElbowMale Elbow PipePush-On Hose BarbPush-On Hose BarbPush-On Hoes BarbHose Barb Connector

Threaded Pipe Fittings

P

Fittings. Made. Easy.800.333.2636

207ACBHP-GCUP-HCP-HNP-LHNP-RAP-PTRP-HPP-CPP-MMP-MFP-MF-45°P-FFP-FF-45°P-MMMP-FMFP-FFMP-FFFP-GCMP-GCFP-GPP-CGPP-GCFSP-AEOGP-GEFPS-CPS-FCPS-FEPS-MEPS-ME-45PL-JSPL-MPPL-TXM2HC

OmegaOne PageDescription

...347450005404...540554065406-P5406-HP5500550255035504550556005602560456056401640564086408-H64106805...14041405150215011503............

Airway

...

...140138140137...140139140140130109E130109N140237140239140339140238140338140437140424140425140438090109B140425090109A090109B...140425...140130140131140231140230140330............

SAE

...F5HA0GGFF...FGPTRHPHHPCRCDCD45°DDDD45°RRSMROMMSMMOF50FF50GP50NHP50NF50G5AOEG..............................

Parker

AACGCUHCHN...RAPTRHPCPMMMFMF45°FFFF45°MMMFMFFFMFFFGCMGCFGPCGPGCFP.................................

SSP

Buttweld Hose ConnectorButtweld Hose Female ConnectorButtweld Hose JIC SwivelPipe FittingSlotted End

Weld Fittings

W

BHCBHFCBHJSPFSE


Solid Braid BandsBraid Band SpecificationsSizing Braid BandsWrapped BandsCut StripBulk CoilCustom ImprintingFixed Imprinting

Braidbands

BB

BB

WBCSBC


4949505051525352535454555556565757585859596061NRNR626263636464646565

7575757678

6668697070717273

316 Stainless Steel Fittings

FlaredFittings

TXTXFlaredFittings

Call toll free:

800.333.2636

Nut • Flare Tube End Nut

318MS51531

SAE 070110

TX-NTX-2-NTX-3-NTX-4-NTX-5-NTX-6-NTX-8-NTX-10-NTX-12-NTX-14-NTX-16-NTX-20-NTX-24-NTX-32-N

Tube FittingPart #

1/83/161/45/163/81/25/83/47/81

1 1/41 1/2

2

Tube O.D.

.550

.610

.620

.680

.730

.850

.9801.0301.0901.1301.2301.4201.750

5/16-243/8-247/16-201/2-209/16-183/4-167/8-14

1 1/16-121 3/16-121 5/16-121 5/8-121 7/8-122 1/2-12

T6UN/UNF-2B L

.179

.241

.304

.373

.439

.568

.696

.832

.9591.0871.3441.6142.164

D

3/87/169/165/8

11/167/81

1 1/41 3/81 1/2

22 1/42 7/8

C Hex

O.D. Socket • Weld x Male Flare 403403-4403-6403-8403-12403-16403-20403-24403-32

Tube FittingPart #

1/43/81/23/41

1 1/41 1/2

2

Tube O.D.

.550

.556

.657

.864

.911

.9581.0831.333

7/16-209/16-183/4-16

1 1/16-121 5/16-121 5/8-121 7/8-122 1/2-12

T I

.74

.81

.941.241.291.401.581.96

L

1/25/8

1 3/161 1/81 3/8

1 11/162

2 5/8

W

1/43/81/23/41

1 1/41 1/2

2

ID-Tube

.16

.16

.16

.25

.25

.25

.25

.25

B

403 TX-N

IL

TubeI.D.

TubeO.D.

W B

Bulkhead Locknut • Bulkhead Fitting Locknut

306MS51860SAE 080118

BNBN-3BN-4BN-5BN-6BN-8BN-10BN-12BN-14BN-16BN-20BN-24BN-32

Part #

3/161/45/163/81/25/83/47/81

1 1/41 1/2

2

Tube O.D.

.22

.28

.28

.27

.31

.36

.41

.41

.41

.41

.41

.41

3/8-247/16-201/2-209/16-183/4-167/8-14

1 1/16-121 3/16-121 5/16-121 5/8-121 7/8-122 1/2-12

T T1

5/811/16

3/413/16

11 1/81 3/81 1/21 5/81 7/82 1/82 3/4

C2 Hex

T

C2

T1

7

L

T6C

D

T

316 Stainless Steel Fittings 316 Stainless Steel Fittings

FlaredFittings

TX-2-UTX-3-UTX-4-UTX-5-UTX-6-UTX-6-4-UTX-8-UTX-8-6-UTX-10-UTX-10-8-UTX-12-UTX-12-8-UTX-12-10-UTX-14-UTX-16-UTX-16-12-UTX-20-UTX-24-UTX-32-U

Tube FittingPart #

1/83/161/45/163/83/81/21/25/85/83/43/43/47/811

1 1/41 1/2

2

Tube O.D.

7700770077007700770077007700770060006000600060006000480048004800360024001800

5/16-243/8-247/16-201/2-209/16-189/16-183/4-163/4-167/8-147/8-14

1 1/16-123/4-167/8-14

1 3/16-121 5/16-121 1/16-121 5/8-121 7/8-122 1/2-12

T Tube EndUN/UNF-2A

DynamicPressure Rtg

7/167/161/29/165/85/8

13/1613/1615/1615/161 1/81 1/81 1/81 1/41 3/81 3/8

1 11/162

2 5/8

C Hex

.062

.125

.172

.234

.297

.297

.391

.391

.484

.484

.609

.609

.609

.718

.844

.6091.0781.3121.781

D Drill

.062

.125

.172

.234

.297

.172

.391

.297

.484

.391

.609

.391

.484

.718

.844

.6091.0781.3121.781

D1 Drill

1.171.231.381.381.411.411.621.521.881.782.161.952.052.222.252.202.442.753.41

L1

5/16-243/8-247/16-201/2-209/16-187/16-203/4-169/16-187/8-143/4-16

1 1/16-123/4-167/8-14

1 3/16-121 5/16-121 1/16-121 5/8-121 7/8-122 1/2-12

T1 Tube EndUN/UNF-2B

TX

Union • Flare Tube End/Flare Tube End

Cap • Flare Tube End Cap

L1D D1

T CT1

L1D D1

T C2T1

2403-LHMS51519

SAE 070119

TX-U

TX-LHU

2403MS 51501

SAE 070101

TX-Z304-CMS51532SAE 070112

TX-UTX-Z TX-LHU

TX-2-ZTX-3-ZTX-4-ZTX-5-ZTX-6-ZTX-8-ZTX-10-ZTX-12-ZTX-14-ZTX-16-ZTX-20-ZTX-24-ZTX-32-Z

Tube FittingPart #

*LL - END TO BASE OF MATING FLARE SEAT

Large Hex Union • Flare Tube End/Flare Tube End1/83/161/45/163/81/25/83/47/81

1 1/41 1/2

2

Tube O.D.

7700770077007700770077006000600048004800360024001800

.601

.662

.673

.766

.806

.9421.0671.2431.2581.2901.3921.7012.071

5/16-243/8-247/16-201/2-209/16-183/4-167/8-14

1 1/16-121 3/16-121 5/16-121 5/8-121 7/8-122 1/2-12

T6UN/UNF-2B Z

Dynamic Pressure Rating

.375

.375

.344

.406

.469

.531

.531

.656

.625

.625

.750

.9381.188

LL

3/87/169/165/8

11/167/81

1 1/41 3/81 1/2

22 1/42 7/8

C Hex

TX-4-LHUTX-4-3-LHUTX-5-LHUTX-6-LHUTX-6-4-LHUTX-8-LHUTX-8-4-LHUTX-8-6-LHUTX-10-LHUTX-12-LHUTX-12-8-LHUTX-16-LHU

Tube FittingPart #

1/4 1/4 to 3/16

5/163/8

3/8 to 1/41/2

1/2 to 1/43/8 to 3/8

3/4 3/4

3/4 to 1/21

Tube O.D.

770077007700770077007700770077006000600060004800

7/16-207/16-201/2-209/16-189/16-183/4-163/4-163/4-167/8-14

1 1/16-121 1/16-121 5/16-12

T Tube EndUN/UNF-2A

DynamicPressure Rtg.

11/1611/16

3/4 13/1613/16

1 1 1

1 1/8 1 3/8 1 3/8 1 5/8

C2 Hex

0.1720.1720.2340.2970.2970.3910.3910.3910.4840.6090.6090.844

D Drill

0.1720.1250.2340.2970.1720.3910.1720.2970.4840.6090.3910.844

D1 Drill

7/16-203/8-241/2-209/16-187/16-203/4-167/16-209/16-187/8-14

1 1/16-123/4-16

1 5/16-12

T1 Tube EndUN/UNF-2A L1

1.371.301.371.411.411.621.521.521.882.162.252.25

C2* - LARGE HEX ALLOWS FOR USE IN MS33649 PORT

800.333.2636Omega1.com

Sleeve • Flare Tube End Sleeve

319MS51533SAE 070115

TX-STX-2-STX-3-STX-4-STX-5-STX-6-STX-8-STX-10-STX-12-STX-14-STX-16-STX-20-STX-24-STX-32-S

Tube FittingPart #

1/83/161/45/163/81/25/83/47/81

1 1/41 1/2

2

Tube O.D.

.267

.329

.383

.445

.502

.682

.797

.9721.0971.2221.5341.7842.409

X

.34

.34

.41

.44

.50

.56

.66

.69

.75

.78

.911.131.19

L

TX-S

98

X

L

T6

C

Z

LL


FlaredFittings

TX

Female Connector • Flare Tube End/Female Pipe End

2405MS51503

SAE 070103

2406MS51534

Tube O.D.T Tube EndUN/UNF-2A

DynamicPressure RtgC1 Hex D Drill

PT PortThread NPTF L2

TX-2-FCTX-3-FCTX-4-FCTX-4-4-FCTX-5-FCTX-5-4-FCTX-6-FCTX-6-6-FCTX-8-FCTX-8-8-FCTX-10-FCTX-12-FCTX-12-8-FCTX-14-FCTX-16-FCTX-20-FCTX-24-FCTX-32-FC

Tube FittingPart #

1/8 3/161/4 1/4 5/165/163/8 3/8 1/2 1/2 5/8 3/4 3/4 7/8 1

11/4 11/2

2

600060006000600060006000600060006000600060004800540042003600300024001800

5/16-243/8-247/16-207/16-201/2-201/2-209/16-189/16-183/4-163/4-167/8-14

1 1/16-121 1/16-121 3/16-121 5/16-121 5/8-121 7/8-122 1/2-12

9/169/169/163/4 9/163/4 3/4 7/8 7/8

1 1/8 1 1/8 1 3/8 1 1/8 1 3/8 1 5/8

2 2 3/8 2 7/8

.062

.125

.172

.172

.234

.234

.297

.297

.391

.391

.484

.609

.609

.718

.8441.0781.3121.781

1/8-271/8-271/8-271/4-181/8-271/4-181/4-183/8-183/8-181/2-141/2-143/4-141/2-143/4-14

1-11 1/211/4-111/211/2-111/2

2-11 1/2

1.131.131.191.391.171.391.411.471.561.791.892.061.912.062.342.482.632.97

TX-FC

D L2

TC1 PT

TX-FC TX-TER

Tube End Reducer • Assembles to Flare End to Reduce Size

Long Male Connector • Flare Tube End/Flare Tube End

TX-4-LCTX-4-4-LCTX-6-LCTX-6-6-LCTX-8-LCTX-8-8-LCTX-10-LCTX-12-LC

Tube FittingPart #

1/41/43/83/81/21/25/83/4

Tube O.D.

60006000600060006000600060004800

7/16-207/16-209/16-189/16-183/4-163/4-167/8-14

11/16-12

T Tube EndUN/UNF-2A

DynamicPressure Rtg

1/29/195/83/4

13/1615/1615/161 1/8

C Hex

.172

.172

.297

.297

.391

.531

.484

.609

D Drill

.172

.172

.281

.297

.406

.391

.531

.609

D1 Drill

1.8102.2502.2502.5002.7502.8003.1203.500

L

1/8-271/4-181/4-183/8-183/8-181/2-141/2-143/4-14

PT NPTF LL

1.581.911.912.152.402.342.663.02

TX-LC2404-LSAE 071802

D D1

T C PT

LLL

TX-LC

TX-TERTX-4-2-TERTX-6-4-TERTX-8-4-TERTX-8-6-TERTX-10-4-TERTX-10-6-TERTX-10-8-TERTX-12-4-TERTX-12-6-TERTX-12-8-TERTX-12-10-TERTX-14-6-TERTX-14-10-TERTX-14-12-TERTX-16-8-TERTX-16-12-TERTX-16-14-TERTX-20-12-TERTX-20-16-TERTX-24-20-TER

Tube FittingPart #

1/4 to 1/83/8 to 1/41/2 to 1/41/2 to 3/85/8 to 1/45/8 to 3/85/8 to 1/23/4 to 1/43/4 to 3/83/4 to 1/23/4 to 5/87/8 to 3/87/8 to 5/87/8 to 3/41 to 1/21 to 3/41 to 7/8

1 1/4 to 3/41 1/4 to 1

1 1/2 to 1 1/4

Tube O.D. Reduction

77007700770077006000600060006000600060006000480048004800480048004800360036002400

5/16-247/16-207/16-209/16-187/16-209/16-183/4-167/16-209/16-183/4-167/8-149/16-187/8-14

1 1/16-123/4-16

1 1/16-121 3/16-121 1/16-12 1 5/16-121 5/8-12

T Tube EndUN/UNF-2A

DynamicPressure Rtg

.062

.172

.172

.297

.172

.297

.391

.172

.297

.391

.484

.297

.484

.609

.391

.609

.7180.6090.8441.078

D Drill L1

.69

.90

.91

.91

.95

.95

.88

.98

.981.081.041.011.221.201.151.361.231.371.441.47

Tube FittingPart #

*D MAY BE SUBSTITUTED FOR D1 WHERE D IS SMALLER THAN D1

Male Connector • Flare Tube End/Male Pipe End

TX-2-CTX-3-CTX-4-CTX-4-4-CTX-4-6-CTX-4-8-CTX-5-CTX-5-4-CTX-6-CTX-6-2-CTX-6-6-CTX-6-8-CTX-8-CTX-8-4-CTX-8-8-CTX-8-12-CTX-10-CTX-10-6-CTX-10-12-CTX-12-CTX-12-8-CTX-12-16-CTX-14-CTX-16-CTX-16-12-CTX-20-CTX-20-16-CTX-24-CTX-24-20-CTX-32-C

1/83/161/41/41/41/45/165/163/83/83/83/81/21/21/21/25/85/85/83/43/43/47/811

1 1/41 1/41 1/21 1/2

2

Tube O.D.

600060006000600060006000600060006000600060006000600060006000480060006000480048005400360042003600420030003600240024001800

5/16-243/8-247/16-207/16-207/16-207/16-201/2-201/2-209/16-189/16-189/16-189/16-183/4-163/4-163/4-163/4-167/8-147/8-147/8-14

1 1/16-121 1/16-121 1/16-121 3/16-121 5/16-121 5/16-121 5/8-121 5/8-121 7/8-121 7/8-122 1/2-12

T Tube EndUN/UNF-2A

Dynamic Pressure Rtg

7/167/161/29/163/47/89/169/165/85/83/47/8

13/1613/167/8

1 1/815/1615/161 1/81 1/81 1/81 3/81 1/41 3/81 3/8

1 11/161 11/16

22

2 5/8

C Hex

.062

.125

.172

.172

.172

.172

.234

.234

.297

.297

.297

.297

.391

.391

.391

.391

.484

.484

.484

.609

.609

.609

.718

.844

.8441.0781.0781.3121.3121.781

D Drill

.188

.188

.188

.281

.406

.531

.188

.281

.281

.188

.406

.531

.406

.281

.531

.719

.531

.406

.719

.719

.531

.938

.719

.938

.7191.250.9381.5001.2501.938

D1 Drill

1.111.141.221.421.441.691.221.421.431.241.441.691.531.531.781.851.891.701.952.062.062.252.092.302.112.452.422.672.663.11

L

.88

.91

.991.081.091.23.991.081.091.011.091.231.181.191.321.371.431.351.471.581.601.681.611.731.631.861.852.082.072.50

LL AfterAssy.

1/8-271/8-271/8-271/4-183/8-181/2-141/8-271/4-181/4-181/8-273/8-181/2-143/8-181/4-181/2-143/4-141/2-143/8-183/4-143/4-141/2-14

1-11 1/23/4-14

1-11 1/23/4-14

1 1/4-11 1/21-11 1/2

1 1/2-11 1/21 1/4-11 1/2

2-11 1/2

PT PORT THD NPTF2404

MS51500SAE 070102

TX-C

LD D1

TC

PT

LL

TX-C

** DOES NOT CONFORM TO MS/SAE, ***L1-END TO BASE OF FLARE SEAT

1110

DL1

T

800.333.2636Omega1.com


FlaredFittings

TX

Male Elbow • Flare Tube End/Male Pipe End

Union Elbow • Flare Tube End/Flare Tube End

D

T

MY

Long Male Elbow • Flare Tube End/ Long Male Pipe End

D1

Y

T

PT

M

XXN3

D

2500MS51505SAE 070201

TX-E

2501MS51504

SAE 070202

TX-ME

2501-LSAE 071502

TX-LMETX-2-ETX-3-ETX-4-ETX-5-ETX-6-ETX-8-ETX-10-ETX-12-ETX-14-ETX-16-ETX-20-ETX-24-ETX-32-E

Tube FittingPart #

1/8 3/161/4 5/163/8 1/2 5/8 3/4 7/8 1

1 1/4 1 1/2

2

Tube O.D.

7700770077006000600060005000500035003500300020001500

5/16-243/8-247/16-201/2-209/16-183/4-167/8-14

1 1/16-121 3/16-121 5/16-121 5/8-121 7/8-122 1/2-12

T Tube EndUN/UNF-2A

DynamicPressure Rtg

.062

.125

.172

.234

.297

.391

.484

.609

.718

.8441.0781.3121.781

D Drill

.770

.830

.890

.9501.0601.2501.4501.6601.8001.8102.0602.3303.060

M

7/167/167/169/169/163/47/8

1 1/161 3/161 5/161 5/81 7/82 1/2

Y AcrossWrench Flats

TX-ETX-P TX-ME TX-LME

Tube FittingPart #

TX-2-METX-3-METX-4-METX-4-4-METX-4-6-METX-4-8-METX-5-METX-5-4-METX-6-METX-6-2-METX-6-6-METX-6-8-METX-8-METX-8-4-METX-8-8-METX-8-12-METX-10-METX-10-6-METX-10-12-METX-12-METX-12-8-METX-12-16-METX-14-METX-16-METX-16-12-METX-16-20-METX-20-METX-20-16-METX-20-24-METX-24-METX-24-20-METX-32-ME

1/8 3/161/4 1/4 1/4 1/4 5/165/163/8 3/8 3/8 3/8 1/2 1/2 1/2 1/2 5/8 5/8 5/8 3/4 3/4 3/4 7/8 1 1 1

1 1/4 1 1/4 1 1/4 1 1/2 1 1/2

2

TubeO.D.

50005000500050005000500050005000500050005000500050005000500040005000500040004000450030003500300035002500250030002000200020001500

5/16-243/8-247/16-207/16-207/16-207/16-201/2-201/2-209/16-189/16-189/16-189/16-183/4-163/4-163/4-163/4-167/8-147/8-147/8-14

1 1/16-121 1/16-121 1/16-121 3/16-121 5/16-121 5/16-121 5/16-121 5/8-121 5/8-121 5/8-121 7/8-121 7/8-122 1/2-12

T Tube EndUN/UNF-2A


.062

.125

.172

.172

.172

.172

.234

.234

.297

.297

.297

.297

.391

.391

.391

.391

.484

.484

.484

.609

.609

.609

.718

.844

.844

.8441.0781.0781.0781.3121.3121.781

D Drill

.188

.188

.188

.281

.406

.531

.188

.281

.281

.188

.406

.531

.406

.281

.531

.719

.531

.406

.719

.719

.531

.938

.719

.938

.7191.2501.250.9381.5001.5001.2501.938

D1 Drill

.770

.830

.8901.0501.1301.230.9501.0501.0601.0601.1401.2201.2501.2501.3301.4201.4501.4501.5301.6601.6601.7601.8001.8101.8102.1302.0602.0602.2002.3302.3303.060

M

.720

.720

.7801.0901.2201.440.7801.0901.090.9001.2201.4701.2201.2201.4701.5901.4701.2801.5901.5901.5901.9701.6901.9701.7802.3802.3802.0602.6402.6402.2503.000

N

7/167/167/169/163/4 7/8 9/169/169/169/163/4 7/8 3/4 3/4 7/8

1 1/167/8 7/8

1 1/161 1/161 1/161 5/161 3/161 5/161 5/161 5/8 1 5/8 1 5/8 1 7/8 1 7/8 1 7/8 2 1/2


.490

.490

.550

.750

.870

.970

.550

.750

.750

.670

.8701.010.870.8801.0101.1101.010.9301.1101.1101.1301.3901.2101.4001.3001.7801.7901.4902.0502.0501.6602.390

XX AfterAssembly

1/8-271/8-271/8-271/4-183/8-181/2-141/8-271/4-181/4-181/8-273/8-181/2-143/8-181/4-181/2-143/4-141/2-143/8-183/4-143/4-141/2-14

1-11 1/23/4-14

1-11 1/23/4-14

1 1/4-11 1/21 1/4-11 1/2

1-11 1/21 1/2-11 1/21 1/2-11 1/21 1/4-11 1/2

2-11 1/2

PT PortTHD NPTF

Tube FittingPart #

TX-4-LMETX-4-4-LMETX-6-LMETX-6-6-LMETX-8-LMETX-8-8-LMETX-10-LMETX-12-LMETX-16-LME

1/4 1/4 3/8 3/8 1/2 1/2 5/8 3/4 1

TubeO.D.

500050005000500050005000500040003000

7/16-207/16-209/16-189/16-183/4-163/4-167/8-14

1 1/16-121 5/16-12

T Tube EndUN/UNF-2A


.172

.172

.297

.297

.391

.391

.484

.609

.844

D Drill

.188

.281

.281

.406

.406

.531

.531

.719

.938

D1 Drill

.8901.0501.0601.1401.2501.3401.4501.6601.810

M

1.1701.4401.5802.3401.8202.1602.1702.4403.010

N3

7/169/169/163/43/47/87/8

1 1/161 5/16


.9601.1001.2201.9901.1701.6901.7001.9302.350

XX AfterAssy.

1/8-271/4-181/4-183/8-183/8-181/2-141/2-143/4-14

1-11 1/2

PT PORTTHD NPTF

*DRILL MAY BE PRESENT DUE TO MANUFACTURING OPTION PER SAE J514

Plug • Flare Plug

2408MS51518SAE 070109

TX-PTube O.D.

TUN/UNF-2B

DynamicPressure RtgC Hex L3

TX-2-PTX-3-PTX-4-PTX-5-PTX-6-PTX-8-PTX-10-PTX-12-PTX-14-PTX-16-PTX-20-PTX-24-PTX-32-P

Tube FittingPart #

1/83/161/45/163/81/25/83/47/81

1 1/41 1/2

2

7700770077007700770077006000600048004800360024001800

5/16-243/8-247/16-201/2-209/16-183/4-167/8-14

1 1/16-121 3/16-121 5/16-121 5/8-121 7/8-122 1/2-12

7/167/161/29/165/8

13/1615/161 1/81 1/41 3/8

1 11/162

2 5/8

.70

.73

.80

.80

.84

.941.101.281.311.331.451.662.05

TC

L3

1312

800.333.2636Omega1.com M Y

XXN

D1

T

PT

D


FlaredFittings

TX

TX-3-E-45TX-4-E-45TX-6-E-45TX-8-E-45TX-10-E-45TX-12-E-45TX-16-E-45

Part #

3/161/43/81/25/83/41

Tube O.D.

5000500050005000500045003500

3/8-247/16-209/16-183/4-167/8-14

1 1/16-121 5/16-12

T Tube EndUN/UNF-2A

DynamicPressure Rtg

.125

.172

.297

.391

.484

.609

.844

D

.69

.72

.83

.981.111.281.47

M2

7/167/169/163/47/8

1 3/161 5/16


Union Elbow-45 • Male Flare End/Male Flare End

Female Elbow • Flare Tube End/Female Pipe End Male Elbow-45 • Flare Tube End/Male Pipe End

2502MS51506SAE 070203

TX-FE2503

MS51508SAE 070302

TX-ME-45

2504SAE 071502

TX-E-45

TX-4-FETX-4-4-FETX-5-FETX-5-4-FETX-6-FETX-6-2-FETX-6-6-FETX-8-FETX-8-4-FETX-8-8-FETX-10-FETX-12-FETX-12-8-FETX-14-FETX-16-FETX-20-FETX-20-FE

Tube FittingPart #

1/4 1/4 5/165/163/8 3/8 3/8 1/2 1/2 1/2 5/8 3/4 3/4 7/8 1

1 1/4 1 1/2

Tube O.D.

9/163/4 9/163/4 3/4 9/167/8 7/8 3/4

1 1/161 1/161 5/161 1/161 5/161 5/8 1 7/8 2 1/2

7/16-207/16-201/2-201/2-209/16-189/16-189/16-183/4-163/4-163/4-167/8-14

1 1/16-121 1/16-121 3/16-121 5/16-121 5/8-121 7/8-12

T Tube EndUN/UNF-2A


.172

.172

.234

.234

.297

.297

.297

.391

.391

.391

.484

.609

.609

.718

.8441.0781.312

D Drill

.172

.172

.234

.234

.297

.297

.297

.391

.391

.391

.484

.609

.609

.718

.8441.0781.312

D1 Drill

1.0801.2201.0801.1301.2301.2301.3101.4201.4201.5201.6401.8901.8901.8602.1702.3302.890

M1

1/8-271/4-181/8-271/4-181/4-181/8-273/8-183/8-181/4-181/2-141/2-143/4-141/2-143/4-14

1-11 1/21 1/4-11 1/21 1/2-11 1/2

PT PortThread NPTF N1

.660

.880

.660

.880

.880

.6701.0201.0201.0101.2301.2301.3601.3501.4201.6301.7002.080

TX-FE TX-ME-45 TX-E-45

Tube Fitting Part #

TX-2-ME-45TX-3-ME-45TX-4-ME-45TX-4-4-ME-45TX-5-ME-45TX-5-4-ME-45TX-6-ME-45TX-6-2-ME-45TX-6-6-ME-45TX-6-8-ME-45TX-8-ME-45TX-8-4-ME-45TX-8-8-ME-45TX-8-12-ME-45TX-10-ME-45TX-10-6-ME-45TX-10-12-ME-45TX-12-ME-45TX-12-8-ME-45TX-12-16-ME-45TX-14-ME-45TX-16-ME-45TX-16-12-ME-45TX-20-ME-45TX-24-ME-45TX-32-ME-45

1/8 3/161/4 1/4 5/165/163/8 3/8 3/8 3/8 1/2 1/2 1/2 1/2 5/8 5/8 5/8 3/4 3/4 3/4 7/8 11

11/411/2

2

TubeO.D.

50005000500050005000500050005000500050005000500050004000500050004000400045003000350030003500250020001500

5/16-243/8-247/16-207/16-201/2-201/2-209/16-189/16-189/16-189/16-183/4-163/4-163/4-163/4-167/8-147/8-147/8-14

1 1/16-121 1/16-121 1/16-121 3/16-121 5/16-121 5/16-121 5/8-121 7/8-122 1/2-12

T Tube EndUN/UNF-2A


.062

.125

.172

.172

.234

.234

.297

.297

.297

.297

.391

.391

.391

.391

.484

.484

.484

.609

.609

.609

.718

.844

.8441.0781.3121.781

D Drill

.188

.188

.188

.281

.188

.281

.281

.188

.406

.531

.406

.281

.531

.719

.531

.406

.719

.719

.531

.938

.719

.938

.7191.2501.5001.938

D1 Drill

.690

.690

.720

.820

.770

.820

.830

.830

.8701.060.980.980.9901.0401.1101.1101.2801.2801.2801.4201.3901.4701.4701.5901.7802.220

M2

.530

.530

.640

.860

.640

.860

.860

.670

.9501.170.950.9501.1701.2001.170.9801.2001.2001.2001.4801.2701.4801.2901.6701.7702.110

N2

7/167/167/169/169/169/169/169/163/4 7/8 3/4 3/4 7/8

1 1/167/8 7/8

1 1/161 1/161 1/161 5/161 5/161 5/161 5/161 5/8 1 7/8 2 1/2


.240

.240

.240

.340

.240

.340

.340

.240

.350

.460

.350

.340

.460

.480

.460

.350

.480

.480

.460

.570

.480

.570

.480

.590

.590

.610

TE

1/8-271/8-271/8-271/4-181/8-271/4-181/4-181/8-273/8-181/2-143/8-181/4-181/2-143/4-141/2-143/8-183/4-143/4-141/2-14

1-11 1/23/4-14

1-11 1/23/4-14

11/4-111/211/2-111/2

2-111/2

PT PortTHD NPTF

D1

Y

Y

T

PTT

M2

M2

N2

TE

D

D

1514

D

T

PT D1

YM1

N1

800.333.2636Omega1.com


FlaredFittings

TX

*D1 DRILL MAY BE PRESENT DUE TO MANUFACTURING OPTION PER SAE J514

Tube Fitting Part #

Male Run Tee • Flare Tube End/Male Pipe End

TX-3-TMTTX-4-TMTTX-4-4-4-TMTTX-5-TMTTX-6-TMTTX-6-6-6-TMTTX-8-TMTTX-8-8-8-TMTTX-10-TMTTX-12-TMTTX-14-TMTTX-16-TMTTX-20-TMTTX-24-TMT

3/161/4 1/4 5/163/8 3/8 1/2 1/2 5/8 3/4 7/8 1

11/411/2

TubeO.D.

50005000500050005000500050005000500040003500300025002000

3/8-247/16-207/16-201/2-209/16-189/16-183/4-163/4-167/8-14

1 1/16-121 3/16-121 5/16-121 5/8-121 7/8-12

T Tube EndUN/UNF-2A


.125

.172

.172

.234

.297

.297

.391

.391

.484

.609

.718

.8441.0781.312

D Drill

.188

.188

.281

.188

.281

.406

.406

.531

.531

.719

.719

.9381.2501.500

D1 Drill

.830

.8901.050.9701.0601.1401.2501.3401.4501.6601.8001.8102.0602.330

M

.720

.7801.090.8101.0901.2201.2201.4701.4701.5901.6901.9702.3802.640

N

7/167/169/169/169/163/4 3/4 7/8 7/8

1 1/161 5/161 5/161 5/8 1 7/8


.480

.540

.750

.570

.750

.870

.8701.0101.0101.1101.2101.4001.7902.050

XX AfterAssy.

1/8-271/8-271/4-181/8-271/4-183/8-183/8-181/2-141/2-143/4-143/4-14

1-11 1/211/4-111/211/2-111/2

PT PortTHD NPTF

Tube FittingPart #

Female Branch Tee • Flare Tube End/Female Pipe End

TX-4-TTFTX-4-4-4-TTFTX-5-TTFTX-6-TTFTX-8-TTFTX-10-TTFTX-12-TTFTX-14-TTFTX-16-TTFTX-20-TTFTX-24-TTF

1/4 1/4 5/163/8 1/2 5/8 3/4 7/8 1

1 1/4 1 1/2

TubeO.D.

50005000500050003000300030003000175015001500

7/16-207/16-201/2-209/16-183/4-167/8-14

1 1/16-121 3/16-121 5/16-121 5/8-121 7/8-12

T Tube EndUN/UNF-2A


.172

.172

.234

.297

.391

.484

.609

.718

.8441.0781.312

D Drill

.328

.422

.328

.422

.563

.688

.891

.8911.1251.4691.703

Ref D1 Drill

1.0801.2201.0801.2301.4201.6401.8901.8602.1702.3302.890

M1

.660

.880

.660

.8801.0201.2301.3601.4201.6301.7002.080

N1

9/163/4 9/163/4 7/8

1 1/161 5/161 5/161 5/81 7/82 1/2


1/8-271/4-181/8-271/4-183/8-181/2-143/4-143/4-14

1-11 1/211/4-111/211/2-111/2

PT PORT THD NPTF

TX-2-TTX-3-TTX-4-TTX-5-TTX-6-TTX-8-TTX-10-TTX-12-TTX-14-TTX-16-TTX-20-TTX-24-T

Tube FittingPart #

1/83/161/45/163/81/25/83/47/81

1 1/41 1/2

Tube O.D.

770077007700600060006000500050003500350030002000

5/16-243/8-247/16-201/2-209/16-183/4-167/8-14

1 1/16-121 3/16-121 5/16-121 5/8-121 7/8-12

T Port ThreadUN/UNF-2A

DynamicPressure Rtg

.062

.125

.172

.234

.297

.391

.484

.609

.718

.8441.0781.312

D Drill

.78

.83

.89

.951.061.251.451.661.731.812.062.33

M

7/167/167/169/169/163/47/8

1 1/161 5/161 5/161 5/81 7/8


Union Tee • Flare Tube End (all three ends)

YM D

T

Y

TPT

N

D

M

XX

2602MS51513SAE 070427

TX-TTF

2603MS51510

SAE 070401

TX-T

2605MS51511

SAE 070424

TX-TMT

TX-TTF TX-T TX-TMT

M10* - CENTER TO BASE OF FLARE SEAT

Male Branch Tee • Flare Tube End/Male Pipe End

2601MS51512SAE 070425

TX-TTMTube Fitting

Part #

TX-3-TTMTX-4-TTMTX-4-4-4-TTMTX-5-TTMTX-6-TTMTX-6-6-6-TTMTX-8-TTMTX-8-8-8-TTMTX-10-TTMTX-12-TTMTX-14-TTMTX-16-TTMTX-20-TTM

3/161/4 1/4 5/163/8 3/8 1/2 1/2 5/8 3/4 7/8 1

11/4

TubeO.D.

5000500050005000500050005000500050004000350030002500

3/8-247/16-207/16-201/2-209/16-189/16-183/4-163/4-167/8-14

1 1/16-121 3/16-121 5/16-121 5/8-12

T Tube EndUN/UNF-2A


.125

.172

.172

.234

.297

.297

.391

.391

.484

.609

.718

.8441.078

D Drill

.188

.188

.281

.188

.281

.406

.406

.531

.531

.719

.719

.9381.250

D1 Drill

.830

.8901.050.9701.0601.1401.2501.3401.4501.6601.8001.8102.060

M

.720

.7801.090.8101.0901.2201.2201.4701.4701.5901.6901.9702.380

N

7/167/169/169/169/163/4 3/4 7/8 7/8

1 1/161 5/161 5/161 5/8


.480

.540

.750

.570

.750

.870

.8701.0101.0101.1101.2101.4001.790

XX AfterAssembly

1/8-271/8-271/4-181/8-271/4-183/8-183/8-181/2-141/2-143/4-143/4-141-11 1/2

11/4-111/2

PT PortTHD NPTF

Y YM M1

D1D1

NN1XX

PTPT

T T

D D

TX-TTM

D1

1716

800.333.2636Omega1.com


FlaredFittings

TX

W* - BULKHEAD PILOT DIAMETER RECOMMENDED CLEARANCE HOLE +.015" OVER "W" DIAMETER

Tube O.D.T Tube EndUN/UNF-2A

DynamicPressure Rtg.D Drill I1 L4C2 Hex

Bulkhead Union • Flare Tube End/Flare Tube End

W DIA.

Tube Fitting Part #

Bulkhead Union Elbow • Flare Tube End/Flare Tube End

TX-4-BETX-5-BETX-6-BETX-8-BETX-10-BETX-12-BETX-14-BETX-16-BETX-20-BE

1/45/163/81/25/83/47/81

1 1/4

TubeO.D.

500050005000500050004500350035003000

7/16-201/2-209/16-183/4-167/8-14

1 1/16-121 3/16-121 5/16-121 5/8-12

T Tube EndUN/UNF-2A


.172

.234

.297

.391

.484

.609

.718

.8441.078

D Drill

1.0201.0201.0901.2501.3901.5601.5601.5601.610

I2

.090

.090

.090

.130

.130

.130

.130

.130

.130

K1

.9701.0601.0901.3601.5601.7801.9201.9402.170

M3

1.5901.7201.8102.1102.3902.6702.8002.8003.130

M4

7/169/169/163/47/8

1 1/161 5/81 5/81 5/8


.440

.500

.560

.750

.8801.0601.1901.3101.630

W DIA.

11/163/4

13/161

1 1/81 3/81 1/21 5/81 7/8

C2 Hex

TX-BU TX-BE

2701SAE 070701

TX-BE

2700MS51520SAE 070601

TX-BUTX-3-BUTX-4-BUTX-5-BUTX-6-BUTX-8-BUTX-10-BUTX-12-BUTX-14-BUTX-16-BUTX-20-BUTX-24-BU

Tube FittingPart #

3/161/45/163/81/25/83/47/81

1 1/41 1/2

77007700770077007700600060004800480036002400

3/8-247/16-201/2-209/16-183/4-167/8-14

1 1/16-121 3/16-121 5/16-121 5/8-121 7/8-12

.125

.172

.234

.297

.391

.484

.609

.718

.8441.0781.312

1.111.2001.2001.2801.4401.5801.7501.7501.7501.8001.810

1.912.0702.0802.1902.4402.7503.0903.1303.1403.3103.520

5/811/163/4

13/161

1 1/81 3/81 1/21 5/81 7/82 1/8

.380

.440

.500

.560

.750

.8801.0601.1901.3101.6301.880

Tube FittingPart #

Female Run Tee • Flare Tube End/Female Tube End

TX-4-TFTTX-4-4-4-TFTTX-6-TFTTX-8-TFTTX-10-TFTTX-12-TFTTX-14-TFTTX-16-TFTTX-20-TFTTX-24-TFT

1/4 1/4 3/8 1/2 5/8 3/4 7/8 1

1 1/41 1/2

TubeO.D.

5000500050003000300030003000175015001500

7/16-207/16-209/16-183/4-167/8-14

1 1/16-121 3/16-121 5/16-121 5/8-121 7/8-12

T Tube EndUN/UNF-2A


.172

.172

.297

.391

.484

.609

.718

.8441.0781.312

D Drill

.328

.422

.422

.563

.688

.891

.8911.1251.4691.703

Ref D1 Drill

1.0801.2201.2301.4201.6401.8901.8602.1702.3302.890

M1

.660

.880

.8801.0201.2301.3601.4201.6301.7002.080

N1

9/163/4 3/4 7/8

1 1/161 5/161 5/161 5/8 1 7/8 2 1/2


1/8-271/4-181/4-183/8-181/2-143/4-143/4-14

1-11 1/211/4-111/211/2-111/2

PT PORT THD NPTF2606

MS51514SAE 070425

TX-TFT

TX-TFT

1918

Y N1

D

M1 PT

T

D1

D

L4I1

TC2W*C2

M3

C2T

DW

M4

I2

K1

Y

800.333.2636Omega1.com


FlaredFittings

TX

W* - BULKHEAD PILOT DIA. RECOMMENDED CLEARANCE HOLE +.015 OVER W DIA.


Tube Fitting Part #

Bulkhead Run Tee • Flare Tube End (all three ends)

TX-4-BRTTX-6-BRTTX-8-BRTTX-10-BRTTX-12-BRT

1/43/81/25/83/4

TubeO.D.

50005000500050004500

7/16-209/16-183/4-167/8-14

1 1/16-12

T Tube EndUN/UNF-2A


.172

.297

.391

.484

.609

D Drill

1.0201.0901.2501.3901.560

I2

.090

.090

.130

.130

.130

K1

.9701.0901.3601.5601.780

M3

1.5901.8102.1102.3902.670

M4

7/169/163/47/8

1 1/16


.440

.560

.750

.8801.060

W DIA.

11/1613/16

11 1/81 3/8

C2 Hex

Tube FittingPart #

Female Bulkhead Connector • Flare Tube End/Female Pipe End

TX-4-BFCTX-4-4-BFCTX-6-BFCTX-8-BFCTX-10-BFCTX-12-BFCTX-14-BFCTX-16-BFC

1/41/43/81/25/83/47/81

TubeO.D.

60006000600060006000480042003600

7/16-207/16-209/16-183/4-167/8-14

1 1/16-121 3/16-121 5/16-12

T Tube EndUN/UNF-2A


11/163/4

13/161

1 1/81 3/81 1/21 5/8

C2 Hex

.172

.172

.297

.391

.484

.609

.718

.844

D Drill

1.201.331.281.441.581.751.751.75

I1

1.842.162.062.342.662.912.893.09

L7

.44

.44

.56

.75

.881.061.191.31

W Dia.

1/8-271/4-181/4-183/8-181/2-143/4-143/4-14

1-11 1/2

PT PORT THD NPTF

Tube Fitting Part #

Male Bulkhead Connector • Flare Tube End/Male Pipe End

TX-4-4-BMCTX-6-BMCTX-8-BMCTX-8-8-BMCTX-10-BMCTX-12-BMCTX-16-BMC

1/4-181/4-183/8-181/2-141/2-143/4-14

1-11 1/2

PT Port Thd. NPTF

6000600060006000600048003600

7/16-209/16-183/4-163/4-167/8-14

1 1/16-121 5/16-12

T Port Thd.UN/UNF-2A


.281

.281

.406

.531

.531

.719

.938

D1 Drill

2.0702.1502.3102.5602.7102.9503.140

L

1.8401.8101.9602.1002.2502.4702.570

LL AfterAssy.

1.2001.2801.4401.4401.5801.7501.750

I1

1/213/16

11

1 1/81 1/81 5/8

C Hex

.44

.56

.75

.75

.881.061.31

W

11/1613/16

11

1 1/81 3/81 5/8

C2 Hex

.172

.297

.391

.391

.484

.609

.844

D Drill2704SAE 070958

2706

TX-BRT


Tube Fitting Part #

Bulkhead Branch Tee • Flare Tube End (all three ends)

TX-4-BBTTX-6-BBTTX-8-BBTTX-10-BBTTX-12-BBTTX-16-BBTTX-20-BBT

1/43/81/25/83/41

11/4

TubeO.D.

5000500050005000450035003000

7/16-209/16-183/4-167/8-14

1 1/16-121 5/16-121 5/8-12

T Tube EndUN/UNF-2A


.172

.297

.391

.484

.609

.8441.078

D Drill

1.0201.0901.2501.3901.5601.5601.610

I2

.090

.090

.130

.130

.130

.130

.130

K1

.9701.0901.3601.5601.7801.9402.170

M3

1.5901.8102.1102.3902.6702.8003.120

M4

7/169/163/47/8

1 1/161 7/161 5/8


.440

.560

.750

.8801.0601.3101.630

W DIA.

11/1613/16

11 1/81 3/81 5/81 7/8

C2 Hex2703SAE 070959

2705

TX-BBT

TX-BBT TX-BRT TX-BFC TX-BMC

TX-BFC

TX-BMC

2120

DL7

I1

WC2

PTC2

D

C2

M4

M3

TY

W

I2K1

Dor

D1

D

LLL

I1.03

TC

PTW C2

M3 Y D

TC2

WM4 K1

I2

800.333.2636Omega1.com

T


FlaredFittings

TX


Swivel Nut Elbow • Flare Tube End/Swivel Nut End

Tube FittingPart #

Long Straight Thread Connector • Flare Tube End/Straight Thread O-Ring

TX-4-LGCTX-6-LGCTX-8-LGCTX-10-LGCTX-12-LGCTX-16-LGCTX-20-LGC

1/43/81/25/83/41

1 1/4

TubeO.D.

7700770077006000600054003600

7/16-209/16-183/4-167/8-14

1 1/16-121 5/16-121 5/8-12

T Tube EndUN/UNF-2A


1.721.922.262.533.023.394.10

LL AfterAssy.

9/1611/167/81

1 1/41 1/21 7/8

C4 Hex

.172

.297

.391

.484

.609

.8441.078

D Drill

.172

.297

.391

.484

.609

.8441.078

D2 Drill

1.391.561.882.092.502.843.47

I4

2.082.312.703.043.613.984.69

L6

7/16-209/16-183/4-167/8-14

1 1/16-121 5/16-121 5/8-12

T5 Port THDUN/UNF-2A

Tube FittingPart #

Straight Thread Connector • Flare Tube End/Straight Thread O-Ring

TX-2-GCTX-3-GCTX-4-GCTX-4-5-GCTX-4-6-GCTX-4-8-GCTX-5-GCTX-5-4-GCTX-5-6-GCTX-6-GCTX-6-4-GCTX-6-5-GCTX-6-8-GCTX-6-10-GCTX-8-GCTX-8-4-GCTX-8-6-GCTX-8-10-GCTX-8-12-GCTX-8-16-GCTX-10-GCTX-10-8-GCTX-10-12-GCTX-12-GCTX-12-8-GCTX-12-10-GCTX-12-14-GCTX-12-16-GCTX-14-GCTX-14-16-GCTX-16-GCTX-16-10-GCTX-16-12-GCTX-16-14-GCTX-16-20-GCTX-20-GCTX-20-16-GCTX-20-24-GCTX-24-GCTX-24-20-GCTX-32-GCTX-32-24-GC

1/8 3/161/4 1/4 1/4 1/4 5/165/165/163/8 3/8 3/8 3/8 3/8 1/2 1/2 1/2 1/2 1/2 1/2 5/8 5/8 5/8 3/4 3/4 3/4 3/4 3/4 7/8 7/8 1 1 1 1 1

1 1/4 1 1/4 1 1/4 1 1/2 1 1/2

2 2

TubeO.D.

770077007700770077007700770077007700770077007700770060007700770077006000600054006000600060006000600060005400540054005400540054005400540036003600360024002400180018001800

5/16-243/8-247/16-207/16-207/16-207/16-201/2-201/2-201/2-209/16-189/16-189/16-189/16-189/16-183/4-163/4-163/4-163/4-163/4-163/4-167/8-147/8-147/8-14

1 1/16-121 1/16-121 1/16-121 1/16-121 1/16-121 3/16-121 3/16-121 5/16-121 5/16-121 5/16-121 5/16-121 5/16-121 5/8-121 5/8-121 5/8-121 7/8-121 7/8-122 1/2-122 1/2-12

T Tube EndUN/UNF-2A


7/161/29/165/8

11/167/85/89/1611/1611/165/85/87/81

7/813/1613/16

11 1/41 1/2

115/161 1/41 1/41 1/81 1/81 3/81 1/21 3/81 1/21 1/21 3/81 3/81 3/81 7/81 7/8

111/162 1/82 1/8

22 3/42 5/8

C4 Hex

.062

.125

.172

.172

.172

.172

.234

.234

.234

.297

.297

.297

.297

.297

.391

.391

.391

.391

.391

.391

.484

.484

.484

.609

.609

.609

.609

.609

.718

.718

.844

.844

.844

.844

.8441.0781.0781.0781.3121.3121.7811.781

D Drill

.062

.125

.172

.172

.172

.391

.234

.172

.234

.297

.172

.234

.297

.297

.391

.172

.297

.391

.391

.391

.484

.391

.484

.609

.391

.484

.609

.609

.718

.718

.844

.484

.609

.718

.8441.078.8441.0781.3121.0781.7811.312

D2 Drill

1.0601.1001.2301.2301.2801.3801.2301.2301.3001.3001.2701.2701.3801.5001.4801.5001.4401.5901.7701.7801.7001.6401.8601.9701.9401.8801.9701.9901.9902.0202.0402.0801.9902.0502.1302.1702.3302.2402.3702.5302.7802.780

L5

.760

.800

.870

.870

.890

.940

.870

.870

.910

.910

.910

.910

.9401.0001.0401.1401.0501.0901.1801.1901.2001.1701.2701.3801.5001.3801.3701.4001.4001.4301.4601.5701.4001.4601.5401.5801.7401.6501.7901.9402.1902.350

LL AfterAssy.

5/16-243/8-247/16-201/2-209/16-183/4-161/2-207/16-209/16-189/16-187/16-201/2-203/4-167/8-143/4-167/16-209/16-187/8-14

1 1/16-121 5/16-12

7/8-143/4-16

1 1/16-121 1/16-12

3/4-167/8-14

1 3/16-121 5/16-121 3/16-121 5/16-121 5/16-12

7/8-141 1/16-121 3/16-121 5/8-121 5/8-121 5/16-121 7/8-121 7/8-121 5/8-122 1/2-121 7/8-12


TX-GC TX-LGC TX-SE

6400-0MS51525SAE 070120

6400-LMS51526

SAE 070120

TX-GC TX-LGC

6500MS51521

SAE 070221

TX-SETube Fitting

Part #

TX-3-SETX-4-SETX-5-SETX-6-SETX-8-SETX-10-SETX-12-SETX-14-SETX-16-SETX-20-SETX-24-SE

3/161/45/163/81/25/83/47/81

1 1/41 1/2

TubeO.D.

77007700600060006000500050002500250025002000

3/8-247/16-201/2-209/16-183/4-167/8-14

1 1/16-121 3/16-121 5/16-121 5/8-121 7/8-12

T Tube EndUN/UNF-2A


1/29/165/8

11/167/81

1 1/41 3/81 1/2

22 1/4

C3 Hex

.125

.172

.234

.297

.391

.484

.609

.718

.8441.0781.312

D Drill

.830

.890

.9701.0601.2501.4501.6601.7301.8102.0602.330

M

1.001.0301.1301.2501.3801.6201.7501.7802.0002.3102.590

M5

7/167/169/169/163/47/8

1 1/161 5/161 5/161 5/81 7/8


.630

.660

.780

.880

.9501.1301.1901.3301.4101.6901.860

M10

3/8-247/16-201/2-209/16-183/4-167/8-14

1 1/16-121 3/16-121 5/16-121 5/8-121 7/8-12

T6 SwivelUN/UNF-2B

Y

T6

T

C3

M

D

M5

M10*

2322

C4T

L5

D2LL

T5

DL6

LLI4D

TC4 T5

D2

800.333.2636Omega1.com


FlaredFittings

TX

Tube Fitting Part #

Straight Thread Elbow • Flare Tube End/Straight thread O-ring

TX-2-GETX-3-GETX-4-GETX-4-6-GETX-5-GETX-5-4-GETX-5-6-GETX-6-GETX-6-4-GETX-6-5-GETX-6-8-GETX-6-10-GETX-8-GETX-8-6-GETX-8-10-GETX-8-12-GETX-10-GETX-10-8-GETX-10-12-GETX-12-GETX-12-8-GETX-12-10-GETX-12-16-GETX-14-GETX-16-GETX-16-12-GETX-20-GETX-20-16-GETX-24-GETX-24-20-GETX-32-GE

1/8 3/161/4 1/4 5/165/165/163/8 3/8 3/8 3/8 3/8 1/2 1/2 1/2 1/2 5/8 5/8 5/8 3/4 3/4 3/4 3/4 7/8 1 1

1 1/41 1/41 1/21 1/2

2

TubeO.D.

6000600060005400540054005400540054005400540054005400540054005400540054005400540054005400300030003000300025002500200020001500

5/16-243/8-247/16-207/16-201/2-201/2-201/2-209/16-189/16-189/16-189/16-189/16-183/4-163/4-163/4-163/4-167/8-147/8-147/8-14

11/16-1211/16-1211/16-121 1/16-121 3/16-121 5/16-121 5/16-121 5/8-121 5/8-121 7/8-121 7/8-122 1/2-12

T Tube EndUN/UNF-2A


7/161/29/1611/165/89/1611/1611/165/85/87/81

7/813/16

11 1/4

115/161 1/41 1/41 1/81 1/81 1/21 3/81 1/21 3/81 7/81 1/22 1/81 7/82 3/4

C4 Hex

.062

.125

.172

.172

.234

.234

.234

.297

.297

.297

.297

.297

.391

.391

.391

.391

.484

.484

.484

.609

.609

.609

.609

.718

.844

.8441.0781.0781.3121.3121.781

D Drill

.062

.125

.172

.297

.234

.172

.297

.297

.172

.234

.391

.484

.391

.297

.484

.609

.484

.391

.609

.609

.391

.484

.844

.718

.844

.6091.078.8441.3121.0781.781

D2 Drill

.770

.830

.890

.050

.950

.950

.9401.0601.0601.0601.1401.2301.2501.2501.3401.4201.4501.4501.5301.6601.6601.6601.8101.8001.8101.8102.0602.0602.3302.3303.060

M

.940

.9401.0301.2501.1301.1301.2501.2501.1901.1901.4501.7001.4501.3601.7001.9401.7001.5501.9401.9401.6301.7802.0502.0002.0502.0502.2502.2502.3902.3902.890

M7

7/167/167/169/169/169/169/169/169/169/163/47/83/43/47/8

1 1/167/87/8

1 1/161 1/161 1/161 1/161 5/161 5/161 5/161 5/161 5/81 5/81 7/81 7/82 1/2


.580

.610

.640

.820

.700

.740

.790

.820

.800

.720

.9601.240.960.8901.1401.4701.1401.0601.7901.2901.1601.2201.4001.3501.4001.4001.6001.6001.7401.7402.300

YY AfterAssy.

5/16-243/8-247/16-209/16-181/2-207/16-209/16-189/16-187/16-201/2-203/4-167/8-143/4-169/16-187/8-14

11/16-127/8-143/4-16

1 1/16-121 1/16-12

3/4-167/8-14

1 5/16-121 3/16-121 5/16-121 1/16-121 5/8-121 5/16-121 7/8-121 5/8-1221/2-12



Tube FittingPart #

Swivel Nut Run Tee • Flare Tube End/Swivel Nut End

TX-4-SRTTX-5-SRTTX-6-SRTTX-8-SRTTX-10-SRTTX-12-SRTTX-14-SRTTX-16-SRTTX-20-SRTTX-24-SRT

1/45/163/81/25/83/47/81

1 1/41 1/2

TubeO.D.

7700600060006000500050002500250025002000

7/16-201/2-209/16-183/4-167/8-14

1 1/16-121 3/16-121 5/16-121 5/8-121 7/8-12

T Tube EndUN/UNF-2A


9/165/8

11/167/81

1 1/41 3/81 1/2

22 1/4

C3 Hex

.172

.234

.297

.391

.484

.609

.718

.8441.0781.312

D Drill

.890

.9501.0601.2501.4501.6601.8001.8102.0602.330

M

1.0001.0601.2501.3801.6201.7501.7802.0002.3102.590

M5

7/169/169/163/47/8

1 1/161 5/161 5/161 5/81 7/8


.660

.780

.880

.9501.1301.1901.3301.4101.6901.860

M10

7/16-201/2-209/16-183/4-167/8-14

1 1/16-121 3/16-121 5/16-121 5/8-121 7/8-12

T6 SwivelUN/UNF-2A

*M11 - CENTER TO BASE OF FLARE SEAT

Tube FittingPart #

Swivel Nut Elbow • Flare Tube End/Swivel Nut End

TX-4-SE-45TX-5-SE-45TX-6-SE-45TX-8-SE-45TX-10-SE-45TX-12-SE-45TX-14-SE-45TX-16-SE-45TX-20-SE-45TX-24-SE-45

1/45/163/81/25/83/47/81

1 1/41 1/2

TubeO.D.

7700600060006000500050002500250025002000

7/16-201/2-209/16-183/4-167/8-14

1 1/16-121 3/16-121 5/16-121 5/8-121 7/8-12

T Tube EndUN/UNF-2A


9/165/8

11/167/81

1 1/41 3/81 1/2

22 1/4

C3 Hex

.172

.234

.297

.391

.484

.609

.718

.8441.0781.312

D Drill

.720

.770

.830

.9801.1101.2801.3901.4701.5901.780

M2

.9401.0001.1201.2801.4401.5001.6201.7502.0302.250

M6

7/169/169/163/47/8

11/161 3/161 5/161 5/81 7/8


.590

.630

.750

.860

.940

.9401.0901.1601.4101.560

M11

7/16-201/2-209/16-183/4-167/8-14

1 1/16-121 3/16-121 5/16-121 5/8-121 7/8-12

T6 SwivelUN/UNF-2B


Tube FittingPart #

Swivel Nut BranchTee • Flare Tube End/Swivel Nut End

TX-4-SBTTX-5-SBTTX-6-SBTTX-8-SBTTX-10-SBTTX-12-SBTTX-14-SBTTX-16-SBTTX-20-SBT

1/45/163/81/25/83/47/81

11/4

TubeO.D.

770060006000600050005000250025002500

7/16-201/2-209/16-183/4-167/8-14

1 1/16-121 3/16-121 5/16-121 5/8-12

T Tube EndUN/UNF-2A


9/165/8

11/167/81

11/41 3/81 1/2

2

C3 Hex

.172

.234

.297

.391

.484

.609

.718

.8441.078

D Drill

.890

.9501.0601.2501.4501.6601.8001.8102.06

M

1.0001.0601.2501.3801.6201.7501.7802.0002.31

M5

7/169/169/163/47/8

1 1/161 5/161 5/161 5/8


.660

.680

.880

.9501.1301.1901.3301.4101.69

M10

7/16-201/2-209/16-183/4-167/8-14

1 1/16-121 3/16-121 5/16-121 5/8-12

T6 SwivelUN/UNF-2B

6502MS51522SAE 070321

TX-SE-45

6600MS51524SAE 070433

TX-SBT

6602SAE 070432

TX-SRT

6801MS51527

SAE 070220

TX-GE

TX-SE-45 TX-SBT TX-SRT TX-GE

YY

Y

T6

T

C3 T6

T

C3

M M5 MM10

DD

D

D2

M5M10*

M

YYM7

C4T

T5

2524

M6M11 D

DT

Y

M2

T6C3

800.333.2636Omega1.com


FlaredFittings

TX

Tube Fitting Part #

Straight Thread Run Tee • Flare Tube End/Straight Thread O-ring

Elbow 90 JIC Swivel/Male

TX-4-GRTTX-5-GRTTX-6-GRTTX-8-GRTTX-10-GRTTX-12-GRTTX-14-GRTTX-16-GRTTX-20-GRTTX-24-GRT

1/4 5/163/8 1/2 5/8 3/4 7/8 1

1 1/41 1/2

TubeO.D.

6000540054005400540054003000300025002000

7/16-201/2-209/16-183/4-167/8-14

1 1/16-121 3/16-121 5/16-121 5/8-121 7/8-12

T Tube EndUN/UNF-2A


9/165/8

11/167/81

1 1/41 3/81 1/21 7/82 1/8

C4 Hex

.172

.234

.297

.391

.484

.609

.718

.8441.0781.312

D Drill

.172

.234

.297

.391

.484

.609

.718

.8441.0781.312

D2 Drill

.890

.9701.0601.2501.4501.6601.7301.8102.0602.330

M

1.0301.1301.2501.4501.7001.9402.0002.0502.2502.390

M7

.640

.700

.820

.9601.1401.2901.3501.4001.6001.740


7/169/169/163/47/8

1 1/161 5/161 5/161 5/81 7/8

XX AfterAssy.

7/16-201/2-209/16-183/4-167/8-14

1 1/16-121 3/16-121 5/16-121 5/8-121 7/8-12


Straight Thread Elbow-45 • Flare Tube End/Straight Thread O-ring

Tube Fitting Part #

Straight Thread Branch Tee • Flare Tube End/Straight Thread O-ring

TX-4-GBTTX-5-GBTTX-6-GBTTX-8-GBTTX-10-GBTTX-12-GBTTX-16-GBT

1/4 5/163/8 1/2 5/8 3/4 1

TubeO.D.

6000540054005400540054003000

7/16-201/2-209/16-183/4-167/8-14

1 1/16-121 5/16-12

T Tube EndUN/UNF-2A


9/165/8

11/167/81

1 1/41 1/2

C4 Hex

.172

.234

.297

.391

.484

.609

.844

D Drill

.172

.234

.297

.391

.484

.609

.844

D2 Drill

.890

.9701.0601.2501.4501.6601.810

M

1.0301.1301.2501.4501.7001.9402.050

M7

7/169/169/163/47/8

1 1/161 5/16


.640

.700

.820

.9601.1401.2901.400

XX AfterAssy.

7/16-201/2-209/16-183/4-167/8-14

1 1/16-121 5/16-12


6802MS51528SAE 070320

TX-GE-45

6803MS51529SAE 070429

TX-GBT

6804MS51530

SAE 070428

TX-GRT

Tube Fitting Part #

JS-4-MEJS-4-4-MEJS-6-MEJS-6-6-MEJS-8-MEJS-8-8-MEJS-10-MEJS-12-MEJS-16-ME

770077006000600060006000500050002500

1/8-271/4-181/4-183/8-183/8-181/2-141/2-143/4-141-11

PT PortTHD NPTF


9/169/1611/1611/167/87/81

1 1/41 1/2

C3 Hex

.172

.172

.297

.297

.391

.391

.484

.609

.844

D Drill

.781.091.091.221.221.471.471.591.97

M

1.011.131.271.271.341.481.621.752.01

7/169/169/163/43/47/87/8

1 1/161 5/16


7/16-207/16-209/16-189/16-203/4-163/4-167/8-14

1 1/16-121 5/16-12

T6UN/UNF-2B

JS-ME

Tube Fitting Part #

TX-4-GE-45TX-5-GE-45TX-6-GE-45TX-6-8-GE-45TX-8-GE-45TX-8-10-GE-45TX-10-GE-45TX-12-GE-45TX-12-10-GE-45TX-14-GE-45TX-16-GE-45TX-20-GE-45TX-24-GE-45

1/4 5/163/8 3/8 1/2 1/2 5/8 3/4 3/4 7/8 1

11/4 11/2

TubeO.D.

6000540054005400540054005400540054003000300025002000

7/16-201/2-209/16-189/16-183/4-163/4-167/8-14

11/16-1211/16-1213/16-1215/16-1215/8-1217/8-12

T Tube EndUN/UNF-2A


9/165/8

11/167/87/811

1 1/41

1 3/81 1/21 7/82 1/8

C4 Hex

.172

.234

.297

.297

.391

.391

.484

.609

.609

.718

.8441.0781.312

D Drill

.172

.234

.297

.391

.391

.484

.484

.609

.484

.718

.8441.0781.312

D2 Drill

.720

.770

.830

.860

.9801.0001.1101.2801.2801.4501.4701.5901.780

M2

1.0501.0501.1401.3001.3001.5201.5201.7301.5801.8601.8601.9101.910

M8

7/169/169/163/4 3/4 7/8 7/8

1 1/161 1/161 5/161 5/161 5/8 1 7/8


.390

.390

.430

.490

.490

.560

.560

.650

.560

.650

.650

.650

.650

TE

7/16-201/2-209/16-183/4-163/4-167/8-147/8-14

11/16-127/8-14

1 3/16-121 5/16-121 5/8-121 7/8-12


TX-GE-45 TX-GBT TX-GRT JS-ME

M5

.66

.78

.88

.88

.951.091.111.181.41

M10

Y

M8

M2

TE

D2

DC4

T5T

D2Y

M7XX

M

D

C4T5

2726

M D

C4

T5D2

YT

M7XX

6501

800.333.2636Omega1.com

M

DPT

T6D

M5

M10

Y

T C3


FlaredFittings

TX

JS-JS JS-GC JS-FC JS-C

Tube O.D. T6Dynamic

Pressure Rtg.C4 Hex D LC3 Hex LL

JS-JSJS-4-JSJS-6-JSJS-8-JSJS-10-JSJS-12-JSJS-16-JS

Part #

1/43/81/25/83/41

600060006000480042003000

7/16-209/16-183/4-167/8-14

1 1/16-121 5/16-12

9/1611/167/81

1 1/41 1/2

.172

.297

.391

.484

.609

.844

1.481.752.022.242.432.68

9/1611/167/81

1 1/41 1/2

.801.011.161.261.311.50

Tube O.D. T5Dynamic

Pressure Rtg.A C3 Hex C4 HexT6 D

JS-GCJS-4-GCJS-6-GCJS-8-GCJS-8-6-GCJS-10-GCJS-12-GCJS-16-GCJS-20-GC

Part #

1/43/81/21/25/83/41

1 1/4

60005400480048004800420030003000

7/16-209/16-183/4-163/8-167/8-14

1 1/16-121 5/16-121 5/8-12

1.311.431.611.541.842.072.282.49

9/1611/167/87/81

1 1/41 1/2

2

9/1611/167/8

13/161 1/161 1/41 1/2

2

7/16-209/16-183/4-163/4-167/8-12

1 1/16-121 5/16-121 5/8-12

.172

.297

.391

.297

.484

.609

.8461.078

Tube O.D. T6Dynamic

Pressure Rtg.C1 Hex C3 Hex DPT NPTF L9

JS-FCJS-4-FCJS-4-4-FCJS-6-FCJS-6-6-FCJS-6-8-FCJS-8-FCJS-8-8-FCJS-10-FCJS-12-FCJS-12-8-FCJS-16-FCJS-20-FCJS-24-FCJS-32-FC

Part #

1/41/43/83/83/81/21/25/83/43/41

1 1/41 1/2

2

60006000600060006000600060004800420042003000300024001800

7/16-207/16-209/16-189/16-189/16-183/4-163/4-167/8-14

1 1/16-121 1/16-121 5/16-121 5/8-121 7/8-122 1/2-12

9/163/43/47/8

1 1/87/8

1 1/81 1/81 3/81 1/41 5/8

22 3/82 7/8

9/169/1611/1611/1611/167/87/81

1 1/41 1/41 1/2

22/1/42 7/8

.172

.172

.297

.267

.297

.391

.391

.484

.609

.609

.8441.0781.3121.781

1/8-271/4-181/4-183/8-181/2-143/8-141/2-141/2-143/4-141/2-14

1-11 1/21 1/41 1/2

2

.921.081.061.161.421.231.481.471.511.501.852.172.262.45

Part #

JS-4-CJS-4-4-CJS-5-4-CJS-6-CJS-6-6-CJS-8-CJS-8-8-CJS-10-CJS-10-6-CJS-12-CJS-12-8-CJS-16-CJS-16-12-CJS-20-CJS-24-CJS-32-C

6000600060005400540048004800480042004200300030003000300024001800

1/41/45/163/83/81/21/25/85/83/43/411

1 1/41 1/2

2

Tube ODDynamic

Pressure Rtg

1/8-271/4-181/4-181/4-183/8-183/8-181/2-141/2-143/8-183/4-141/2-14

1-11 1/23/4-141 1/41 1/2

2

PT NPTF

9/169/165/8

11/1611/167/87/811

1 1/41 1/41 1/21 1/2

22 1/42 7/8

C3 Hex

9/169/165/8

11/163/47/87/811

1 1/41 1/41 1/21 1/2

22 1/42 5/8

C4 Hex

.172

.172

.234

.297

.281

.391

.391

.484

.484

.609

.594

.844

.8441.0781.3121.781

D Drill

.172

.172

.281

.297

.281

.391

.391

.484

.406

.609

.531

.844

.7191.0781.3121.781

.63

.85

.88

.94

.95

.951.071.07.991.151.171.901.211.471.711.98

LL

7/16-207/16-201/2-209/16-189/16-183/4-163/4-167/8-147/8-14

1 1/16-121 1 /16-121 5/16-121 5/16-121 5/8-121 7/8-122 1/2-12

T6

JS-CD1 Drill

1.131.461.571.591.591.691.922.051.872.152.152.502.332.763.053.38

L8

D

L

LL

C4 C3

T6A

LL

C3C4T5 D

T6

C3 L9

D

T6 C1

PT

2928

D D1

T6

C3 C4 PT

L8LL

Swivel Straight Thread Connector • Swivel Nut End/Straight Thread O-ring

Swivel Nut Union Swivel Female Connector • Swivel Nut End/Female Pipe End

Swivel Connector • Swivel Nut End/Male Pipe End

*LL - PORT FACE TO BASE OF FLARE SEAT

LL* - PORT FACE TO BASE OF FLARE SEATD1* DRILL MAY BE PRESENT DUE TO MANUFACTURING OPTION PER SAE J514

*L9 - PORT FACE TO BASE OF FLARE SEAT

6565

6402

6506

6505

800.333.2636Omega1.com


FlarelessFittings

FFFlarelessFittings

Call toll free:

800.333.2636

Cap • Flareless Tube Cap

C304-CMS51890

SAE 080112

F-Z

F-Z

F-4-ZF-5-ZF-6-ZF-8-ZF-10-ZF-12-ZF-16-Z

Tube FittingPart #

1/45/163/81/25/83/41

Tube O.D.

6000600060005000500045004000

7/16-201/2-209/16

3/4-167/8

1 1/16-121 5/16-12

T6Dynamic

Pressure Rtg

9/165/8

11/167/81

1 1/41 1/2

C Hex

.36

.40

.42

.44

.47

.48

.58

LL

.73

.77

.80

.87

.981.001.08

Z

T

C2

T1

Bulkhead Locknut • Bulkhead Fitting Locknut

306MS51860SAE 080118

BNBN-3BN-4BN-5BN-6BN-8BN-10BN-12BN-14BN-16BN-20BN-24BN-32

Part #

3/161/45/163/81/25/83/47/81

1 1/41 1/2

2

Tube O.D.

.22

.28

.28

.27

.31

.36

.41

.41

.41

.41

.41

.41

3/8-247/16-201/2-209/16-183/4-167/8-14

1 1/16-121 3/16-121 5/16-121 5/8-121 7/8-122 1/2-12

T T1

5/811/16

3/413/16

11 1/81 3/81 1/21 5/81 7/82 1/82 3/4

C2 Hex

ZLL

T6

C

31


FlarelessFittings

F

Union Adapter • Flareless Tube End/Male Flare End Union FlarelessTube End • Flareless Tube End

Large Hex Union • Flareless Tube End/Flareless Tube End

F-U F-LHUF-TXU

C2403MS51814

SAE 080101

F-U

C2403-LHMS51856

SAE 080119

C2402MS51856SAE 080119

F-LHU

F-TXUF-2-UF-3-UF-4-UF-5-UF-6-UF-8-UF-10-UF-12-UF-14-UF-16-UF-20-UF-24-UF-32-U

Part #

1/83/161/45/163/81/25/83/47/81

1 1/41 1/2

2

Tube O.D.

6000600060006000600050005000450040004000300020001500

5/16-243/8-247/16-201/2-209/16-183/4-167/8-14

1 1/16-121 3/6-121 5/16-121 5/8-121 7/8-122 1/2-12

T/TIDynamic

Pressure Rtg

7/167/161/29/165/8

13/1615/161 1/81 1/41 3/8

1 11/162

2 5/8

C Hex

.094

.125

.203

.234

.281

.422

.500

.656

.718

.8751.0931.3441.812

D / D1

.188

.234

.234

.250

.250

.305

.350

.350

.350

.415

.415

.485

.485

K / K1

1.021.111.181.181.241.421.611.811.811.811.891.962.11

L1

F-4-TXUF-6-TXUF-8-TXUF-10-TXUF-12-TXUF-16-TXU

Part #

1/43/81/25/83/41

Tube O.D.

500050005000500045004000

7/16-209/16-183/4-167/8-14

1 1/16-121 5/16-12

TDynamic

Pressure Rtg

1/25/8

13/1615/161 1/81 5/8

C Hex

.172

.297

.391

.484

.609

.844

D Drill

.234

.250

.305

.350

.350

.415

K

1.191.281.471.691.941.97

L

F-4-LHUF-6-LHUF-8-LHUF-10-LHUF-12-LHUF-16-LHU

Part #

1/43/81/25/83/41

Tube O.D.

600060005000500045004000

7/16-209/16-183/4-167/8-14

1 1/16-121 5/16-12

T/TIDynamic

Pressure Rtg

11/1613/16

11 1/81 3/81 5/8

C2 Hex

.203

.281

.422

.500

.656

.875

D / D1

.234

.250

.305

.350

.350

.415

K / K1

1.181.241.421.611.811.81

L1

3332

800.333.2636Omega1.com

L1

CT/T1

D/D1

K/K1 C2 T

D

L1K1D1

K

L

DD

T

C K


FlarelessFittings

F

Tube FittingPart # Tube O.D.

T Tube EndUN/UNF-2A

DynamicPressure Rtg.C1 Hex D Drill K

PT Port THDNPTF

Female Connector • Flareless Tube End/Female Pipe End

L2

1/81/41/45/163/83/83/81/21/21/25/83/47/81

1 1/41 1/2

5000500050005000500050005000500050005000450040003000300025002500

5/16-247/16-207/16-201/2-209/16-189/16-189/16-183/4-163/4-163/4-167/8-14

1 1/16-121 3/16-121 5/16-121 5/8-121 7/8-12

.9/169/163/49/163/47/8

1 1/87/87/8

1 1/81 1/81 3/81 3/81 5/8

22 3/8

.094

.203

.203

.234

.281

.281

.281

.422

.422

.422

.500

.656

.718

.8751.0931.344

.19

.24

.24

.26

.26

.26

.26

.31

.31

.31

.36

.36

.36

.42

.42

.49

1/8-271/8-271/4-181/8-271/4-183/8-181/2-143/8-181/4-181/2-141/2-143/4-143/4-14

1-11 1/21 1/4-11 1/21 1/2-11 1/2

1.051.091.291.081.311.341.591.471.461.691.771.891.862.132.222.23

F-2-FC F-4-FCF-4-4-FC F-5-FC F-6-FCF-6-6-FCF-6-8-FCF-8-FC F-8-4-FCF-8-8-FC F-10-FC F-12-FC F-14-FCF-16-FC F-20-FCF-24-FC

Tube End Reducer • Flareless Tube End ReducerMale Connector • Flareless Tube End • Male Pipe End

*D1 - DRILL MAY BE PRESENT DUE TO MANUFACTURERS OPTION PER SAE J514

Plug • Flareless Tube End Plug

C2406SAE 080123

F-TER

C2408MS51891

SAE 080109

F-P

C2404MS51819SAE 080102

F-C

C2405MS51816SAE 080103

F-FC

F-TER F-PF-C F-FC

Tube FittingPart #

F-6-4-TERF-8-4-TERF-8-6-TERF-10-8-TERF-12-6-TERF-12-8-TERF-16-8-TERF-16-12-TER

3/8 to 1/41/2 to 1/41/2 to 3/85/8 to 1/23/4 to 3/83/4 to 1/21 to 1/21 to 3/4

TubeO.D.

60005000500050004500450040004000

.375

.500

.500

.625

.750

.7501.001.00

T Tube EndUN/UNF-2A


1/29/165/8

13/1613/1613/161 1/161 1/8

C3 Hex

.203

.203

.281

.422

.281

.422

.422

.656

D Drill

.250

.375

.375

.500

.625

.625

.844

.844

D1Drill

.234

.234

.250

.305

.250

.305

.305

.350

K

.881.001.001.091.161.161.131.13

Q

1.611.731.771.951.942.032.052.25

L

7/16-207/16-209/16-183/4-169/16-183/4-163/4-16

1 1/16-12

T6 SwivelUN/UNF-2B

F-4-PF-5-PF-6-PF-8-PF-10-PF-12-PF-16-P

Tube FittingPart #

1/45/163/81/25/83/41

Tube O.D.

6000600060005000500045004000

7/16-201/2-209/16-183/4-167/8-14

1 1/16-121 5/16-12

TDynamic

Pressure Rtg

1/29/165/8

13/1615/161 1/81 3/8

C Hex

.234

.250

.250

.305

.350

.350

.415

K

.72

.72

.75

.84

.971.091.09

L3

Tube FittingPart #

F-2-C F-2-4-CF-3-CF-4-CF-4-4-C F-4-6-CF-4-8-CF-5-C F-5-4-CF-6-CF-6-2-CF-6-6-CF-6-8-CF-8-C F-8-4-CF-8-8-C F-8-12-CF-10-C F-10-6-CF-10-12-CF-12-C F-12-8-CF-14-C F-16-C F-16-12-C F-20-CF-24-CF-32-C

1/81/83/161/41/41/41/45/165/163/83/83/83/81/21/21/21/25/85/85/83/43/47/811

1 1/41 1/2

2

TubeO.D.

5000500050005000500050005000500050005000500050005000500050005000400045004500450040004000300030003000250025002000

5/16-245/16-243/8-247/16-207/16-207/16-207/16-201/2-201/2-209/16-189/16-189/16-189/16-183/4-163/4-163/4-163/4-167/8-147/8-147/8-14

1 1/16-121 1/16-121 3/16-121 5/16-121 5/16-121 5/8-121 7/8-122 1/2-12

T Tube EndUN/UNF-2A

Dynamic Pressure RtgC Hex

.094

.094

.125

.203

.203

.203

.203

.234

.234

.281

.281

.281

.281

.422

.422

.422

.422

.500

.500

.500

.656

.656

.718

.875

.8751.0931.3441.812

D Drill

.187

.281

.187

.187

.281

.406

.531

.187

.281

.281

.187

.406

.531

.406

.281

.531

.718

.531

.406

.718

.718

.531

.718

.937

.7181.2501.5001.937

D1 Drill

.19

.19

.24

.24

.24

.24

.24

.26

.26

.26

.26

.26

.26

.31

.31

.31

.31

.36

.36

.36

.36

.36

.36

.42

.42

.42

.49

.49

K

.80

.91

.86

.90

.99

.981.12.90.991.00.93.991.141.091.101.231.271.291.211.351.401.421.401.511.401.601.691.86

LL After Assy.

1.031.251.091.131.331.331.581.131.331.341.161.341.601.441.441.691.751.751.561.831.881.881.882.081.882.192.282.47

L

1/8-271/4-181/8-271/8-271/4-183/8-181/2-141/8-271/4-181/4-181/8-273/8-181/2-143/8-181/4-181/2-143/4-141/2-143/8-183/4-143/4-141/2-143/4-14

1-11 1/23/4-14

1 1/4-11 1/21 1/2-11 1/2

2-11 1/2

PT Port THDNPTF

7/169/167/161/29/163/47/89/169/165/85/83/47/8

13/1613/167/8

1 1/815/1615/161 1/81 1/81 1/81 1/41 3/81 3/8

1 11/162

2 3/4

3534

D1 D

T

C

L

K

800.333.2636Omega1.com

D D1

CT

L

K PT

LLL2

TD

K C1 PT

L3K Tube

O.D.

CT


FlarelessFittings

F

F-2-EF-4-EF-5-EF-6-EF-8-EF-10-EF-12-EF-14-EF-16-EF-20-EF-24-EF-32-E

Part #

1/81/45/163/81/25/83/47/81

1 1/41 1/2

2

Tube O.D.

500050005000500050004500400030003000250020001500

5/16-247/16-201/2-209/16-183/4-16

7/81 1/16-121 3/16-121 5/16-121 5/8-121 7/8-122 1/2-12

TDynamic

Pressure Rtg

.094

.203

.234

.282

.422

.500

.656

.718

.8751.0931.3441.813

D Drill

.188

.234

.250

.250

.305

.350

.350

.350

.415

.415

.485

.485

K

.77

.89

.951.051.251.421.581.661.731.892.022.45

M

Union Elbow • Flareless Tube End/Flareless Tube End

7/167/169/169/163/47/8

1 1/161 5/161 5/161 5/81 7/82 1/2


Flareless Tube End • Male Pipe End

F-E F-ME

C2500MS51820SAE 080201

F-EC2501

MS51815SAE 080202

F-METube Fitting

Part #

F-2-ME F-3-MEF-4-MEF-4-4-ME F-4-6-MEF-5-ME F-5-4-MEF-6-MEF-6-2-MEF-6-6-MEF-6-8-MEF-8-ME F-8-4-MEF-8-8-ME F-8-12-MEF-10-ME F-10-6-MEF-12-ME F-12-8-MEF-14-ME F-16-ME F-16-12-ME F-20-MEF-24-MEF-32-ME

1/83/161/41/41/45/165/163/83/83/83/81/21/21/21/25/85/83/43/47/811

1 1/41 1/2

2

TubeO.D.

5000500050005000500050005000500050005000500050005000500040004500450040004000300030003000250025002000

5/16-243/8-247/16-207/16-207/16-201/2-201/2-209/16-189/16-189/16-189/16-183/4-163/4-163/4-163/4-167/8-147/8-14

1 1/16-121 1/16-121 3/16-121 5/16-121 5/16-121 5/8-121 7/8-122 1/2-12

T Tube EndUN/UNF-2A


.094

.125

.203

.203

.203

.234

.234

.282

.282

.282

.282

.422

.422

.422

.422

.500

.500

.656

.656

.718

.875

.8751.0941.3441.813

D Drill

.188

.188

.188

.281

.406

.188

.281

.281

.188

.406

.531

.406

.281

.531

.719

.531

.406

.719

.531

.719

.938

.7191.2501.5001.938

D1 Drill

.19

.24

.24

.24

.24

.26

.26

.26

.26

.26

.26

.31

.31

.31

.31

.36

.36

.36

.36

.36

.42

.42

.42

.49

.49

K

.78

.84

.891.031.13.951.031.051.051.141.231.251.251.341.421.421.421.581.581.661.731.731.892.022.45

M

.72

.72

.781.091.22.811.091.09.881.221.471.221.161.471.591.471.301.591.591.691.971.782.382.643.00

N

7/167/167/169/163/49/169/169/169/163/47/83/43/47/8

1 1/167/87/8

1 1/161 1/161 5/161 5/161 5/161 5/81 7/82 1/2


.49

.49

.55

.75

.87

.58

.75

.75

.65

.871.01.87.821.011.111.01.951.111.131.211.401.301.792.052.39

XX AfterAssy.

1/8-271/8-271/8-271/4-183/8-181/8-271/4-181/4-181/8-273/8-181/2-143/8-181/4-181/2-143/4-141/2-143/8-183/4-141/2-143/4-14

1-11 1/23/4-14

1 1/4-11 1/21 1/2-11 1/22-11 1/2

PT PortTHD NPTF

D

M

K

Y

T

D1PT

K

DT M

XXN

Y

3736

800.333.2636Omega1.com


Tube FittingPart #

Female Elbow • Flareless Tube End/Female Pipe End

F-4-FEF-4-4-FE F-5-FE F-6-FEF-6-6-FEF-8-FE F-8-4-FEF-8-8-FE F-10-FE F-12-FE F-14-FEF-16-FE F-20-FEF-24-FE

1/41/45/163/83/81/21/21/25/83/47/81

1 1/41 1/2

TubeO.D.

50005000500050004500300050003000300030003000175015001000

7/16-207/16-201/2-209/16-189/16-183/4-163/4-163/4-167/8-14

1 1/16-121 3/16-121 5/16-121 5/8-121 7/8-12

T Tube EndUN/UNF-2A

Dynamic Pressure RtgD Drill

.328

.422

.328

.422

.563

.563

.422

.688

.688

.906

.9061.1251.4691.719

D1 Drill

.24

.24

.26

.26

.26

.31

.31

.31

.36

.36

.36

.42

.42

.49

K

.891.03.951.051.131.231.231.341.421.581.621.732.082.58

M

9/163/49/163/47/87/83/4

1 1/161 1/161 5/161 5/161 5/81 7/82 1/2


.66

.88

.66

.881.021.02.881.231.231.361.421.631.702.08

N1

1/8-271/4-181/8-271/4-183/8-183/8-181/4-181/2-141/2-143/4-143/4-14

1-11 1/21 1/4-11 1/21 1/2-11 1/2

PT Port THDNPTF

.203

.203

.234

.282

.282

.422

.422

.422

.500

.656

.718

.8751.0931.344

Tube Fitting Part #

F-3-ME-45F-4-ME-45F-4-4-ME-45F-5-ME-45 F-6-ME-45F-8-ME-45 F-10-ME-45 F-12-ME-45 F-14-ME-45 F-16-ME-45 F-20-ME-45

3/161/41/45/163/81/25/83/47/81

1 1/4

TubeO.D.

50005000500050005000500045004000300030002500

3/8-247/16-207/16-201/2-209/16-183/4-167/8-14

1 1/16-121 3/16-121 5/16-121 5/8-12

T Tube EndUN/UNF-2A


.125

.203

.203

.234

.282

.422

.500

.656

.718

.8751.093

D Drill

.188

.188

.281

.188

.281

.406

.531

.719

.719

.9381.250

D1 Drill

.24

.24

.24

.26

.26

.31

.36

.36

.36

.42

.42

K

.64

.70

.81

.75

.83

.981.081.271.341.361.45

M2

.52

.64

.86

.66

.86

.951.171.201.301.481.67

N2

7/167/169/169/169/163/47/8

1 1/161 5/161 5/161 5/8


.23

.23

.34

.23

.34

.35

.46

.48

.48

.57

.59

TE AfterAssy.

1/8-271/8-271/4-181/8-271/4-183/8-181/2-143/4-143/4-14

1-11 1/21 1/4-11 1/2

PT PortTHD NPTF

Tube Fitting Part #

Male Branch Tee • Flareless Tube End • Male Pipe End

F-2-TTM F-4-TTMF-4-4-4-TTM F-5-TTM F-6-TTMF-8-TTM F-8-8-8-TTM F-10-TTM F-12-TTM F-14-TTM F-16-TTM

1/81/41/45/163/81/21/25/83/47/81

TubeO.D.

50005000500050005000500050004500400030003000

5/16-247/16-207/16-201/2-209/16-183/4-163/4-167/8-14

1 1/16-121 3/16-121 5/16-12

T Tube EndUN/UNF-2A


.093

.203

.203

.234

.281

.422

.422

.500

.656

.718

.875

D Drill

.188

.188

.281

.188

.281

.406

.531

.531

.719

.719

.938

D1 Drill

.20

.24

.24

.26

.26

.31

.31

.36

.36

.36

.42

K

.77

.891.03.951.051.251.341.421.581.661.73

M

.72

.781.09.811.091.221.471.471.591.691.97

N

7/167/169/169/169/163/47/87/8

1 1/161 5/161 5/16


.49

.55

.75

.58

.75

.871.011.011.111.181.40

XX AfterAssy.

1/8-271/8-271/4-181/8-271/4-183/8-181/2-141/2-143/4-143/4-14

1-11 1/2

PT PortTHD NPTF

FlarelessFittings

F

Part #

Female Branch Tee • Flareless Tube End/Female Pipe End

F-4-TTFF-4-4-4-TTF F-6-TTFF-8-TTF F-10-TTF F-12-TTF F-14-TTF F-16-TTF F-20-TTF

1/41/43/81/25/83/47/81

1 1/4

TubeO.D.

500050005000300030003000300017501500

7/16-207/16-209/16-183/4-167/8-14

1 1/16-121 3/16-121 5/16-121 5/8-12

T Tube EndUN/UNF-2A


.328

.422

.422

.563

.688

.906

.9061.1251.469

D1 Drill

.24

.24

.26

.31

.36

.36

.36

.42

.42

K

.891.031.051.231.421.581.621.732.08

M1

9/163/43/47/8

1 1/161 5/161 5/161 5/81 7/8


.66

.88

.881.021.231.361.421.621.70

N1

1/8-271/4-181/4-183/8-181/2-143/4-143/4-14

1-11 1/21 1/4-11 1/2

PT Port THDNPTF

.203

.203

.282

.422

.500

.656

.718

.8751.093

C2502MS51813SAE 080203

F-FE

C2503MS51817SAE 080302

F-ME-45

C2601MS51818

SAE 080425

F-TTM

C2602MS51821

SAE 080427

F-TTF

F-TTM F-TTFF-FE F-ME-45

D1K

D

M

N1

YT MY D

K

PTD1

N

XXD

K

D1 PT

N1

T Y M1

3938

45° Male Elbow • Flareless Tube End/Male Pipe End

800.333.2636Omega1.com

M2 D

N2

Y

T K

D1PT

TE

T

PT


F-4-TF-5-TF-6-TF-8-TF-10-TF-12-TF-16-TF-20-TF-24-T

Part # Tube O.D.

500050005000500045004000300025002000

7/16-201/2-209/16-183/4-167/8-14

1 1/16-121 3/16-121 5/8-121 7/8-12

T/T1Dynamic

Pressure Rtg

.203

.234

.281

.422

.500

.656

.8751.0931.344

D/D1

.234

.250

.250

.305

.350

.350

.415

.415

.485

K/K1

.89

.951.051.251.421.581.731.892.02

M/M1

Union Tee • Flareless Tube End

7/169/169/163/47/8

1 1/161 5/161 5/81 7/8


Tube Fitting Part #

Male Run Tee • Flareless Tube End • Male Pipe End

F-4-TMTF-4-4-4-TMT F-5-TMT F-6-TMTF-8-TMT F-8-8-8-TMT F-10-TMT F-12-TMT F-14-TMT F-16-TMT

1/41/45/163/81/21/25/83/47/81

TubeO.D.

5000500050005000500050004500400030003000

7/16-207/16-201/2-209/16-183/4-163/4-167/8-14

1 1/16-121 3/16-121 5/16-12

T Tube EndUN/UNF-2A


.203

.203

.234

.282

.422

.422

.500

.656

.718

.875

D Drill

.188

.281

.188

.281

.406

.531

.531

.719

.719

.938

D1 Drill

.24

.24

.26

.26

.31

.31

.36

.36

.36

.42

K

.891.03.951.051.251.341.421.581.621.73

M

.781.09.811.091.221.471.471.591.691.97

N

7/169/169/169/163/47/87/8

1 1/161 5/161 5/16


.55

.75

.58

.75

.871.011.011.111.211.40

XX AfterAssy.

1/8-271/4-181/8-271/4-183/8-181/2-141/2-143/4-143/4-141-11 1/2

PT PortTHD NPTF

*D1 - DRILL MAY BE PRESENT DUE TO MANUFACTURERS OPTION PER SAE J514

Tube FittingPart #

Female Run Tee • Flareless Tube End/Female Pipe End

F-4-TFTF-6-TFTF-8-TFT F-10-TFT F-12-TFT F-16-TFT

1/43/81/25/83/41

TubeO.D.

500050003000300030001750

7/16-209/16-183/4-167/8-14

1 1/16-121 5/16-12

T Tube EndUN/UNF-2A


.328

.422

.563

.688

.9061.125

D1 Drill

.24

.26

.31

.36

.36

.42

K

.891.051.231.421.581.73

M1

9/163/47/8

1 1/161 5/161 5/8


.66

.881.021.231.361.62

N1

1/8-271/4-183/8-181/2-143/4-14

1-11 1/2

PT Port THDNPTF

203.282.422.500.656.875

1/45/163/81/25/83/41

1 1/41 1/2

FlarelessFittings

F

Part #

Bulkhead Union • Flareless Tube End/Flareless Tube End

F-4-BUF-6-BUF-8-BUF-10-BUF-12-BUF-16-BU

1/43/81/25/83/41

TubeO.D.

600060005000500045004000

7/169/16

3/4-167/8-14

1 1/16-121 5/16-12

TDynamic

Pressure Rtg

.203

.281

.422

.500

.656

.875

D Drill

1.121.171.311.451.561.56

I1

.234

.250

.305

.350

.350

.415

K

1.891.982.222.482.722.72

L4

.44

.56

.75

.881.061.31

W

11/1613/16

11 1/81 3/81 5/8

C2 Hex

C2603MS51811SAE 080401

F-T

C2605MS51824SAE 080424

F-TMT

C2606MS51822

SAE 080426

F-TFT

C2700SAE 080601

F-BU

F-TMT F-TFT F-BUF-T

M/M1N

Y D/D1

K/K1T

Y XX D1

PTPT

DK

MT

N1 D1

K

M1

D

YT L4I1

C2WC2 K

D

4140

800.333.2636Omega1.com


FlarelessFittings

F

Tube FittingPart #

Straight Thread Connector • Flareless Tube End/Straight Thread O-Ring

F-2-GC F-3-GCF-4-GCF-4-5-GC F-4-6-GCF-4-10-GCF-5-GC F-6-GCF-6-4-GCF-6-8-GCF-8-GC F-8-6-GCF-8-10-GC F-8-12-GCF-10-GC F-10-12-GCF-12-GCF-12-8-GCF-12-16-GCF-16-GC F-16-12-GC F-16-20-GCF-20-GCF-24-GCF-32-GC

1/83/161/41/41/41/45/163/83/83/81/21/21/21/25/85/83/43/43/4111

1 1/41 1/2

2

TubeO.D.

5000500050005000500050005000500050005000500050005000450050004500450045004000400040003000300030002000

5/16-243/8-247/16-207/16-207/16-207/16-201/2-209/16-189/16-189/16-183/4-163/4-163/4-163/4-167/8-147/8-14

1 1/16-121 1/16-121 1/16-121 5/16-121 5/16-121 5/16-121 5/8-121 7/8-122 1/2-12

T Tube EndUN/UNF-2A

Dynamic Pressure RtgC4 Hex

.094

.125

.203

.203

.203

.203

.234

.281

.281

.281

.422

.422

.422

.422

.500

.500

.656

.656

.656

.875

.875

.8751.0931.3441.813

D Drill

.094

.125

.203

.234

.281

.500

.234

.281

.203

.422

.422

.281

.500

.656

.500

.500

.656

.422

.875

.875

.6561.0931.0931.3441.813

D2 Drill

.19

.24

.24

.24

.24

.24

.26

.26

.26

.26

.31

.31

.31

.31

.36

.36

.36

.36

.36

.42

.42

.42

.42

.49

.49

K

.70

.75

.77

.77

.81

.90

.77

.83

.83

.84

.94

.891.001.081.061.141.191.191.221.221.221.311.311.371.53

LL After Assy.

1.001.051.131.131.201.401.131.221.191.281.381.281.501.671.561.731.781.751.811.811.811.911.911.972.13

L5

5/16-243/8-247/16-201/2-209/16-187/8-181/2-209/16-187/16-203/4-163/4-169/16-187/8-14

1 1/16-127/8-14

1 1/16-121 1/16-12

3/4-161 5/16-121 5/16-121 1/16-121 5/8-121 5/8-121 7/8-122 1/2-12


7/161/29/165/8

11/161

5/811/165/87/87/8

13/161

1 1/41

1 1/41 1/41 1/81 1/21 1/21 3/81 7/81 7/82 1/22 3/4

C6400MS51843

SAE 080120

F-GCC2707MS51824SAE 080424

F-TX2UPart #

Bulkhead Union Adapter • Flareless Tube Bulkhead End/Male Flare End

F-4-TX2UF-6-TX2UF-8-TX2UF-10-TX2UF-12-TX2UF-16-TX2U

1/43/81/25/83/41

TubeO.D.

500050005000500045004000

7/16-209/16-183/4-167/8-14

1 1/16-121 5/16-12

TDynamic

Pressure Rtg

.172

.297

.391

.484

.609

.844

D Drill

1.121.171.311.451.561.56

I1

.234

.250

.305

.350

.350

.415

K

1.942.082.312.562.942.95

L1

.44

.56

.75

.881.061.31

W

11/1613/16

11 1/81 3/81 5/8

C

F-TX2U F-GC

L1I1

C

T

K

D

W

L5LL

D D2

C4T5

TK

4342

800.333.2636Omega1.com


Tube FittingPart #

Swivel Nut Run Tee • Flareless Tube End/Swivel Nut EndSwivel Nut Elbow • Flareless Tube End/Swivel Nut End

F-4-SRTF-6-SRTF-8-SRTF-12-SRTF-16-SRT

1/43/81/23/41

TubeO.D.

50005000500040003000

7/16-209/16-183/4-16

1 1/16-121 5/16-12

T/T6Dynamic

Pressure RtgD/D1

.234

.250

.305

.350

.415

K

.891.051.251.581.73

M

1.051.281.471.771.86

M5

7/169/163/4

1 1/161 5/16


.75

.941.071.291.43

M11

9/1611/167/8

1 1/41 1/2

C3 Hex

.203

.282

.422

.656

.875

Tube FittingPart #

F-4-SEF-6-SEF-8-SEF-10-SEF-12-SEF-16-SE

1/43/81/25/83/41

TubeO.D.

500050005000450040003000

7/16-209/16-183/4-167/8-14

1 1/16-121 5/16-12

T/T6Dynamic

Pressure RtgD/D1

.234

.250

.305

.350

.350

.415

K

.891.051.251.421.581.73

M

1.051.281.471.611.771.86

M5

7/169/163/47/8

1 1/161 5/16


.75

.941.071.201.291.43

M11

.203

.282

.422

.500

.656

.875

FlarelessFittings

F

Tube Fitting Part #

Straight Thread Elbow • Flareless Tube End/Straight Thread O-Ring

F-3-GEF-4-GEF-5-GEF-6-GEF-6-8-GEF-8-GEF-8-6-GEF-8-10-GEF-8-12-GEF-10-GEF-12-GEF-12-8-GEF-12-10-GEF-12-16-GEF-16-GEF-16-12-GEF-20-GEF-24-GEF-32-GE

3/161/45/163/83/81/21/21/21/25/83/43/43/43/411

1 1/41 1/2

2

TubeO.D.

5000500050005000500050005000450040004500400045004000300030003000250020001500

3/8-247/16-201/2-209/16-189/16-183/4-163/4-163/4-163/4-167/8-14

1 1/16-121 1/16-121 1/16-121 1/16-121 5/16-121 5/16-121 5/8-121 7/8-122 1/2-12

T Tube EndUN/UNF-2A


.125

.203

.234

.282

.282

.422

.422

.422

.422

.500

.656

.656

.656

.656

.875

.8751.0931.3441.813

D Drill

.125

.203

.234

.282

.422,422.282.500.656.500.656.422.500.875.875.6561.0931.3441.813

D2 Drill

.24

.24

.26

.26

.26

.31

.31

.31

.31

.36

.36

.36

.36

.36

.42

.42

.42

.49

.49

K

.84

.89

.951.051.141.251.271.341.431.421.581.581.581.731.731.731.892.022.45

M

.941.031.131.251.451.451.331.701.941.701.941.631.782.052.052.052.252.392.89

M7

7/167/169/169/163/43/43/47/8

1 1/167/8

1 1/161 1/161 1/161 5/161 5/161 5/161 5/81 7/82 1/2


.64

.67

.77

.861,011.01.941.201.351.201.351.191.281.461.461.461.661.802.23

TE AfterAssy.

3/8-247/16-201/2-209/16-183/4-163/4-169/16-187/8-14

1 1/16-127/8-14

1 1/16-123/4-167/8-14

1 5/16-121 5/16-121 1/16-121 5/8-121 7/8-122 1/2-12

PT PortTHD

1/29/165/8

11/167/87/8

11/161

1 1/41

1 1/47/81

1 1/21 1/21 1/41 7/82 1/82 3/4

C4Hex

C6500 MS51852SAE 080221

F-SEC6602

MS51854SAE 080432

F-SRT

C6801MS51839

SAE 080320

F-GE

F-SRT F-GEF-SE

4544

M5M11D

C3

K

T6

M

D1

YT MD

D2

M7

TE

C4

Y

PT

K T

800.333.2636Omega1.com

D1

M T

T6

M5

M11

Y

DK


FlarelessFittings

F

Tube Fitting Part #

Straight Thread Elbow-45 • Flareless Tube End/Straight Thread O-Ring

F-4-GE-45F-6-GE-45F-8-GE-45 F-12-GE-45 F-16-GE-45

1/43/81/23/41

TubeO.D.

50005000500040003000

7/16-209/16-183/4-16

1 1/16-121 5/16-12

T Tube EndUN/UNF-2A


.203

.282

.422

.656

.875

D Drill

.203

.282

.422

.656

.875

D2 Drill

.24

.26

.31

.36

.42

K

.70

.83

.981.271.36

M2

1.051.141.301.731.86

M8

7/169/163/4

1 1/161 5/16


.36

.39

.44

.59

.59

TE AfterAssy.

7/16-209/16-183/4-16

1 1/16-121 5/16-12

PT PortTHD

9/1611/167/8

1 1/41 1/2

C4Hex

Tube FittingPart #

Straight Thread Branch Tee • Flareless Tube Ends/Straight Thread O-Ring

F-4-GBTF-6-GBTF-8-GBTF-10-GBTF-12-GBTF-16-GBT

1/43/81/25/83/41

TubeO.D.

500050005000450040003000

7/16-209/16-183/4-167/8-14

1 1/16-121 5/16-12

T/T5Dynamic

Pressure RtgD/D2

.234

.250

.250

.350

.350

.415

K

.891.051.251.421.581.73

M

1.031.251.451.701.942.05

M7

7/169/163/47/8

1 1/161 5/16


9/1611/167/81

1 1/41 1/2

C4 Hex

.203

.282

.422

.500

.656

.875

Straight Thread Run Tee • Flareless Tube End/Straight Thread O-Ring

C6802-45MS51842SAE 080320

F-GE-45

C6803-NWOMS51841SAE 080429

F-GBT

C6804-NOWMS51892

SAE 080428

F-GRTTube Fitting

Part #

F-4-GRTF-6-GRTF-8-GRTF-10-GRTF-12-GRTF-16-GRT

1/43/81/25/83/41

TubeO.D.

500050005000450040003000

7/16-209/16-183/4-167/8-14

1 1/16-121 5/16-12

T/T5Dynamic

Pressure RtgD/D2

.234

.250

.305

.350

.350

.415

K

.891.051.251.421.581.72

M

1.031.251.451.701.942.05

M7

7/169/163/47/8

1 1/161 5/16


.67

.861.011.201.351.46

XX

9/1611/167/81

1 1/41 1/2

C4 Hex

.203

.282

.422

.500

.656

.875

F-GBT F-GRTF-GE-45M M7

K

D/D2Y

C4T/T5XX

4746

Y

M8

M2

TED2

K

C4T

PT

D

MYT5D

C4T

M7

D2

K

800.333.2636Omega1.com


207ACBH P-GCU PipeFittings

PPThreadedFittings

Call toll free:

800.333.2636

W* – BULKHEAD PILOT DIAMETER RECOMMENDED CLEARANCE HOLE +.015" OVER W* DIAMETER

P-4-GCUP-6-GCUP-8-GCUP-10-GCUP-12-GCUP-16-GCUP-20-GCUP-24-GCUP-32-GCU

P-GCU Straight Thread Union • Straight Thread O-Ring/Adjustable Straight Thread

Tube FittingPart #

7/16-209/16-183/4-167/8-14

1 1/16-121 5/16-121 5/8-121 7/8-122 1/2-12


600060006000540048003600300024001800

.47

.59

.63

.75

.89

.89

.89

.89

.89

9/1611/167/81

1 1/41 1/21 7/82 1/82 3/4

C4 HexLL AfterAssy.


1.221.411.561.812.132.132.132.132.13

L1

.203

.297

.422

.484

.656

.8751.0781.3441.813

D2 Drill

207ACBH-4S207ACBH-4207ACBH-6207ACBH-8207ACBH-12

Part #

1/41/43/81/23/4

PT

.421

.421

.570

.687

.906

3/4-163/4-161-14

1 1/8-141 5/16-12

ST ID Flow

11

1 1/41 3/81 5/8

C1

.941.501.311.501.50

L

.691.251.131.25.990

L1

.75

.751.001.131.31

W*

11

1 1/81 1/41 1/2

C

Anchor Coupling 207ACBH

P-GCU3474

49

L1LL

D2

T5C4

LL1

I.D.

W

PTC C1ST


P

Hex Nipple X Hollow Hex Plug • Male Pipe Thread

L

LL

PT1PT

D D1

C

Hex Pipe Coupling • Female Pipe Thread/Female Pipe Thread

L

D

WW1

PT1 C

PT

5000SAE 140138

P-HC

5404SAE 140137

P-HN

P-HN P-LHNP-HC

P-1/8-HCP-1/4 X 1/8-HCP-1/4-HCP-3/8 X 1/8-HCP-3/8 X 1/4-HCP-3/8-HCP-1/2 X 1/8-HCP-1/2 X 3/8-HCP-1/2 X 1/4-HCP-1/2-HCP-3/4 X 1/4-HCP-3/4 X 1/2-HCP-3/4-HCP-1-HCP-1 X 1/2-HCP-1 X 3/4-HCP-1 1/4-HCP-1 1/4 X 1-HCP-1 1/2-HCP-11/2 X 11/4-HCP-2-HC

Tube FittingPart #

1/8-271/4-181/4-183/8-183/8-183/8-181/2-141/2-141/2-141/2-143/4-143/4-143/4-14

1-11 1/21-11 1/21-11 1/2

11/4-111/211/4-11 1/211/2-111/211/2-111/2

2-111/2

PT PortThread NPTF

720072007200720072007200600060006000600048004800480036003600360030003000240024002400

1/8-271/8-271/4-181/8-271/4-183/8-181/8-271/4-183/8-181/2-141/4-181/2-143/4-14

1-11 1/21/2-143/4-14

11/4-11 1/21-11 1/2

11/2-111/211/4-111/2

2-11 1/2

PT1 Port THDNPTF

DynamicPressure Rtg

.328

.328

.422

.328

.422

.563

.328

.422

.563

.688

.422

.688

.8911.125.688.8911.4691.1251.7031.4692.188

Ref D Drill

.75

.941.131.031.131.131.061.381.501.501.551.881.531.891.771.771.931.931.941.931.96

L

.63

.75

.75

.88

.88

.881.131.131.131.131.361.361.381.631.631.632.002.002.382.372.88

W

.63

.63

.75

.63

.75

.88

.63

.75

.881.13.751.131.381.631.131.382.001/632.382.372.88

W1

5/83/43/47/87/87/8

1 1/81 1/81 1/81 1/81 3/81 3/81 3/81 5/81 5/81 5/8

22

2 3/82 3/82 7/8

C Hex

P-1/8-HNP-1/4 X 1/8-HNP-1/4-HNP-3/8 X 1/8-HNP-3/8 X 1/4-HNP-3/8-HNP-1/2 X 1/8-HNP-1/2 X 3/8-HNP-1/2 X 1/4-HNP-1/2-HNP-3/4 X 1/4-HNP-3/4 X 3/8-HNP-3/4 X 1/2-HNP-3/4-HNP-1-HNP-1 X 1/4-HNP-1 X 3/8-HNP-1 X 1/2-HNP-1 X 3/4-HNP- 1 1/4 X 1-HNP-1 1/4-HNP-1 1/2-HNP-1 1/2 X 1-HNP-2-HNP-2 X 1 1/2-HN

Tube FittingPart #

1/8-271/4-181/4-183/8-183/8-183/8-181/2-141/2-141/2-141/2-143/4-143/4-143/4-143/4-14

1-11 1/21-11 1/21-11 1/21-11 1/21-11 1/2

1 1/4-11 1/21 1/4-11 1/21 1/2-11 1/21 1/2-11 1/2

2-11 1/22-11 1/2

PT PortThread NPTF

7200720072007200720072007200720072007200720072007200720072007200720072007200600060003600360030003000

1/8-271/8-271/4-181/8-271/4-183/8-183/8-143/8-181/4-181/2-141/4-183/8-141/2-143/4-14

1-11 1/21/4-143/8-141/2-143/4-14

1-11 1/21 1/4-11 1/21 1/2-11 1/2

1-11 1/22-11 1/2

1 1/2-11 1/2

PT1 Port THDNPTF

DynamicPressure Rtg

.188

.281

.281

.406

.406

.406

.406

.531

.531

.531

.719

.719

.719

.719

.938

.938

.938

.938

.7191.2501.2501.5001.5001.9381.500

D Drill

.188

.188

.281

.188

.281

.406

.188

.406

.281

.531

.281

.406

.531

.719

.938

.281

.406

.531

.719

.9381.2501.500.9381.9381.500

D1 Drill

1.061.251.451.451.451.451.451.701.701.891.781.781.961.962.341,961.962.092.092.452.482.612.552.832,79

L

.59

.68

.77

.87

.76

.75

.87

.89

.90

.96

.96

.95

.84

.701.191.051.041.061.041.281.291.421.381.611.58

LL AfterAssy.

7/165/85/83/43/43/47/87/87/87/8

1 1/81 1/81 1/81 1/81 3/81 3/81 3/81 3/81 3/81 3/41 3/4

22

2 1/22 1/2

C Hex

P-1/8-LHN X 1.5P-1/8-LHN X 2.0P-1/8-LHN X 2.5P-1/8-LHN X 3.0P-1/4-LHN X 1.5P-1/4-LHN X 2.0P-1/4-LHN X 2.5P-1/4-LHN X 3.0P-1/4-LHN X 4.0P-3/8-LHN X 2.0P-3/8-LHN X 3.0P-3/8-LHN X 3.5P-3/8-LHN X 4.0P-1/2-LHN X 2.0P-1/2-LHN X 2.5P-1/2-LHN X 3.0P-1/2-LHN X 4.0P-1/2-LHN X 6.0P-3/4-LHN X 3.00P-1-LHN X 3.00

Long Pipe Nipple • Male Pipe Thread/Male Pipe Thread

Tube FittingPart #

1/8-271/8-271/8-271/8-271/4-181/4-181/4-181/4-181/4-183/8-183/8-183/8-183/8-181/2-141/2-141/2-141/2-141/2-143/4-14

1-11 1/2

PT PortThread NPTF

72007200720072007200720072007200720072007200720072007200720072007200720072007200

1.031.532.032.53.821.321.822.323.321,302.302.803.301.071.572.073.075.072.041.86

7/167/167/167/165/85/85/85/85/83/43/43/43/47/87/87/87/87/8

1 1/81 3/8

C HexLL AfterAssy.


1.502.002.503.001.502.002.503.004.002.003.003.504.002.002.503.004.006.003.003.00

L

.188

.188

.188

.188

.281

.281

.281

.281

.281

.406

.406

.406

.406

.531

.531

.531

.531

.531

.719

.938

D Drill

P-LHN3474

L

LL

PTPT

D

C

5150

800.333.2636Omega1.com

PipeFittings


P

PT Port ThreadNPTF

PTF Port THDNPTF

DynamicPressure Rtg

Ref D Drill L1C2 Hex

Pipe Thread Reducer • Male Pipe Thread/Female Pipe Thread

LL

P-1/4 X 1/8-PTRP-3/8 X 1/8-PTRP-3/8 X 1/4-PTRP-1/2 X 1/8-PTRP-1/2 X 1/4-PTRP-1/2 X 3/8-PTRP-3/4 X 1/8-PTRP-3/4 X 1/4-PTRP-3/4 X 3/8-PTRP-3/4 X 1/2-PTRP-1 X 1/8-PTRP-1 X 3/8-PTRP-1 X 1/2-PTRP-1 X 3/4-PTRP-1 1/4 X 1/4-PTRP -1 1/4 X 3/8-PTRP-1 1/4 X 1/2-PTRP-1 1/4 X 3/4-PTRP- 1 1/4 X 1-PTRP-1 1/2 X 1/4-PTRP-1 1/2 X 3/8-PTRP-1 1/2 X 3/4-PTRP-1 1/2 X 1-PTRP-1 1/2 X 1 1/4-PTRP-2 X 1/2-PTRP-2 X 3/4-PTRP-2 X 1-PTRP-2 X 1 1/4-PTRP-2 X 1 1/2-PTR

Tube FittingPart #

1/4-183/8-183/8-181/2-141/2-141/2-143/4-143/4-143/4-143/4-14

1-11 1/21-11 1/21-11 1/21-11 1/2

1 1/4-11 1/21 1/4-11 1/21 1/4-11 1/21 1/4-11 1/21 1/4-11 1/21 1/2-11 1/21 1/2-11 1/21 1/2-11 1/21 1/2-11 1/21 1/2-11 1/2

2-11 1/22-11 1/22-11 1/22-11 1/22-11 1/2

72007200720060006000600048004800480048004800360036003600360030003000300030002400240024002400240024002400240024002400

1/8-271/8-271/4-181/8-271/4-183/8-181/8-271/4-183/8-181/2-141/8-273/8-181/2-143/4-141/4-183/8-181/2-143/4-14

1-11 1/21/4-183/8-183/4-14

1-11 1/21 1/4-11 1/2

1/2-143/4-14

1-11 1/21 1/4-11 1/21 1/2-11 1/2

.328

.328

.422

.328

.422

.563

.328

.422

.563

.688

.328

.563

.688

.891

.328

.563

.688

.8911.125.328.563.8911.1251.469.688.8911.1251.4691.719

.86

.86

.861.111.111.111.171.171.171.171.361.361.361.361.471.471.471.471.471.521.581.581.581.581.751.751.751.751.75

5/83/43/47/87/87/8

1 1/81 1/81 1/81 1/81 3/81 3/81 3/81 3/81 3/41 3/41 3/41 3/41 3/4

22222

2 1/22 1/22 1/22 1/22 1/2

.52

.51

.51

.65

.65

.65

.69

.69

.69

.69

.79

.79

.79

.79

.53

.87

.87

.88

.88,92.98.98.99.991.141.141.141.141.14

PT PortThread NPTF

PT1 PortTHD NPTF

DynamicPressure RtgD Drill L1C1 Hex

Reducing Adapter • Female Pipe Thread/Male Pipe Thread

LL

P-1/8-RAP-1/4 X 1/8-RAP-1/4-RAP-3/8 X 1/8-RAP-3/8 X 1/4-RAP-3/8-RAP-1/2 X 1/8-RAP-1/2 X 1/4-RAP-1/2 X 3/8-RAP-1/2-RAP-3/4 X 1/4-RAP-3/4 X 3/8-RAP-3/4 X 1/2-RAP-1-RAP-1 X 1/4-RAP-1 X 1/2-RAP- 1 X 3/4-RAP-1 1/4-RAP-1 1/4 X 1-RAP-1 1/2 X 1-RAP-2-RA

Tube FittingPart #

1/8-271/8-271/4-181/8-271/4-183/8-181/8-271/4-183/8-181/2-141/4-183/8-181/2-14

1-11 1/21/4-181/2-143/4-14

11/4-111/21-11 1/21-11 1/22-11 1/2

720072007200720072007200600060006000600048004800480036003600360036003000300024002400

1/8-271/4-181/4-183/8-183/8-183/8-181/2-141/2-141/2-141/2-143/4-143/4-143/4-14

1-11 1/21-11 1/21-11 1/21-11 1/2

1 1/4-11 1/21 1/4-11 1/21 1/2-11 1/2

2-11 1/2

.188

.188

.281

.188

.281

.406

.188

.281

.406

.531

.281

.406

.531

.938

.281

.531

.7191.250.9380.9381.938

1.031.201.391.251.441.441.501.691.691.691.751.751.942.372.012.192.192.502.472.472.66

5/83/43/47/87/87/8

1 1/81 1/81 1/81 1/81 3/81 3/81 3/81 5/81 5/81 5/81 5/8

22

2 3/82 7/8

.80

.971.051.021.101.091.271.351.341.231.411.401.481.801.671.731.711.911.901,902.06

C5 - ACROSS INTERNAL HEX FLATS

P-1/8-CPP-1/4-CPP-3/8-CPP-1/2-CPP-3/4-CPP-1-CP

Hollow Hex Plug • Male Pipe Thread

Tube FittingPart #

1/8-271/4-183/8-181/2-143/4-14

1-11 1/2

PT PortTHD NPTF

720072007200720072007200

3/161/45/163/89/161 3/8

C5 InternalHex


.070

.120

.110

.150

.140

.190

LL

.300

.460

.460

.610

.620

.770

B

P-1/8-HPP-1/4-HPP-3/8-HPP-1/2-HPP-3/4-HPP-1-HPP-1 1/4-HPP-1 1/2-HPP-2-HP

Hex Head Plug • Male Pipe Thread

Tube FittingPart #

1/8-271/4-183/8-181/2-143/4-14

1-11 1/21 1/4-11 1/21 1/2-11 1/2

2-11 1/2

PT PortTHD NPTF

720072007200720072007200600036003000

7/169/1611/167/8

1 1/161 3/81 3/4

2 2 1/2

C HexDynamic

Pressure Rating

.330

.410

.430

.510

.580

.680

.410

.8601.080

LL

.560

.750

.780

.9701.0601.2501.4101.5001.690

L

C PT

LLB

PT

LLL

C5

5405SAE 140139

P-RA

5406-PSAE 130109E

P-HP

P-HP P-PTR P-CPP-RA

5406SAE 140140

P-PTR

5406-HPSAE 130109N

P-CP

LLL1

DC2PT

PTF

5352

800.333.2636Omega1.com

LLL1

PT1

C1PT

D

PipeFittings


P

Part #

Male Pipe Elbow

P-1/8-MMP-1/4-MMP-3/8-MMP-3/8 X 1/4-MMP-1/2-MMP-1/2 X 3/8-MMP-3/4-MMP-3/4 X 1/2-MMP-1-MMP-1 X 3/4-MMP-1 1/4-MMP-1 1/2-MM

1/8-271/4-183/8-183/8-181/2-141/2-143/4-143/4-14

1-11 1/21-11 1/2

11/4-11 1/211/2-11 1/2

PT NPTF

600060006000600060006000400040003000300025002500

1/8-271/4-183/8-181/4-181/2-143/8-183/4-141/2-14

1-11 1/23/4-14

11/4-11 1/211/2-111/2

PTI NPTFDynamic

Pressure Rtg

.187

.281

.406

.281

.531

.406

.719

.531

.938

.7191.2501.500

D1 DRILL

.781.091.221.221.471.471.591.591.971.972.222.34

N

.781.091.221.221.471.281.591.471.971.782.222.34

NI

.55

.75

.87

.871.011.011.111.111.401.401.631.75

XX

7/169/163/43/47/87/8

1 1/161 1/161 5/81 5/161 7/81 7/8


.55

.75

.87

.871.01.821.11.991.401.301.631.75

XXX

.187

.281

.406

.406

.531

.531

.719

.719

.938

.9381.2501.500

D DRILL

P-1/8-MFP-1/8 X 1/4-MFP-1/4-MFP-1/4 X 1/8-MFP-1/4 X 1/2-MFP-1/4 X 3/8-MFP-3/8-MFP-3/8 X 1/4-MFP-3/8 X 1/2-MFP-1/2-MFP-1/2 X 3/8-MFP-1/2 X 3/4-MFP-3/4-MFP-3/4 X 1/2-MFP-1-MFP- 1 1/4-MFP-1 1/2-MF

Part #

1/8-271/8-271/4-181/4-181/4-181/4-183/8-183/8-183/8-181/2-141/2-141/2-143/4-143/4-14

1-11 1/21 1/4-11 1/21 1/2-11 1/2

PT NPTF

50005000500050003000450045005000300030004500300030003000175030003000

1/8-271/4-181/4-181/8-271/2-143/8-183/8-181/4-181/2-141/2-143/8-183/4-143/4-141/2-14

1-11 1/21 1/4-11 1/21 1/2-11 1/2

PT1 NPTFDynamic

Pressure Rtg

0.780.881.091.091.281.221.221.221.281.471.481.591.591.591.972.382.64

N

0.660.880.880.661.231.011.020,881.231.231.251.361.361.231.631.702.08

N1

0.550.650.750.750.890.870.870.870.931.011.021.131.111.111.401.792.05

XX

9/169/163/49/16

1 1/167/87/83/4

1 1/161 1/16

7/81 5/161 5/161 1/161 5/81 7/82 1/2


.188

.188

.281

.281

.281

.281

.406

.406

.406

.531

.531

.531

.719

.719

.9381.2501.500

D DRILL

Street Elbow

P-1/8-MF-45P-1/4-MF-45P-3/8-MF-45P-1/2-MF-45P-3/4-MF-45P-1-MF-45P-1 1/4-MF-45

Part #

1/8-271/4-183/8-181/2-143/4-14

1-11 1/211/4-11 1/2

PTm NPTF

5000500045003000300017501500

1/8-271/4-183/8-181/2-143/4-14

1-11 1/21 1/4-11 1/2

PTf NPTFDynamic

Pressure Rtg

.47

.63

.72

.91

.971.131.63

N3

.721.051.061.341.381.721.80

N4

.23

.34

.35

.45

.48

.57

.59

TE

9/163/47/8

1 1/161 5/161 5/81 7/8


.188

.281

.406

.531

.719

.9381.250

D DRILL

45 Street Elbow

P-1/8-FF P-1/4-FFP-3/8-FF P-1/2-FF P-3/4-FF P-1-FF P-1 1/4-FF P-1 1/2-FF

Tube FittingPart #

1/8-271/4-183/8-181/2-143/4-14

1-11 1/21 1/4-11 1/21 1/2-11 1/2

PT Port THD NPTF

50005000450030003000175015001500

.328

.422

.563

.688

.8911.1251.4691.703

DynamicPressure Rtg

.66

.881.021.231.361.621.702.08

N1

9/163/47/8

1 1/161 5/161 5/81 7/82 1/2


Ref D1 Drill

Female Pipe Elbow • Female Pipe Thread/Female Pipe Thread

P-MF P-MF-45 P-FFP-MM

5500SAE 140237

P-MM

5502SAE 140239

P-MF

5503SAE 140339

P-MF-45

5504SAE 140238

P-FF

TE

N4

DPTm

PTf

N3

Y

5554

NXX D

N1

Y

PT

PT1

800.333.2636Omega1.com

N1XXX

Y*N

XX D

D1PT1

PT

N1Y

PT

D1

PipeFittings


P

P-1/4-FF-45P-3/8-FF-45 P-1/2-FF-45 P-3/4-FF-45 P-1-FF-45

Female Pipe Elbow-45 • Female Pipe Thread/Female Pipe Thread

Tube FittingPart #

1/4-183/8-181/2-143/4-14

1-11 1/2

PT PortThread NPTF

50004500300030001750

.422

.563

.688

.9061.125

Ref D1 DrillDynamic

Pressure Rtg

3/47/8

1 1/161 5/161 5/8


.69

.75

.941.001.19

N2

P-1/8-MMM P-1/4-MMMP-3/8-MMM P-1/2-MMM P-3/4-MMM

Female Pipe Tee • Male Pipe Thread (all three ends)

Tube FittingPart #

1/8-271/4-183/8-181/2-143/4-14

PT PortThread NPTF

50005000450030003000

7/169/163/47/8

1-1/16

.19

.28

.41

.53

.72

DY Across

Wrench FlatsDynamic

Pressure Rating

.38

.56

.56

.75

.75

L1

.781.091.221.471.59

L

Tube FittingPART #

Male Run Tee • Male Pipe Thread/Female Pipe Thread

P-1/8-FMFP-1/4-FMFP-3/8-FMF P-1/2-FMF P-3/4-FMF P-1-FMF P-1 1/4-FMFP-1 1/2-FMF

1/8-271/4-183/8-181/2-143/4-14

1-11 1/21 1/4-11 1/211/2-11 1/2

PTM PortTHD NPTF

50005000450030003000175015001500

1/8-271/4-183/8-181/2-143/4-14

1-11 1/211/4-11 1/211/2-11 1/2

PT PortTHD NPTF


.328

.422

.563

.688

.8911.1251.4691.719

Ref D1Drill

.781.091.221.471.591.972.382.64

N

.66

.881.021.231.361.631.7

2.08

N1

0.55.75.871.011.111.401.112.05

XX AfterAssy.

9/163/47/8

1 1/161 5/161 5/81.8752.5


.188

.281

.406

.531

.719

.9381.251.5

D Drill

NXX

PTM

PT

DY

N1

D1

Male Branch Tee • Male Pipe Thread/Female Pipe Thread

NXX

PT

PTMD

Y N1 D1

P-MMM P-FMF P-FFMP-FF-45

5505SAE 140338

P-FF-455602

SAE 140424

P-FMF

5600SAE 140437

P-MMM5604

SAE 140425

P-FFMTube Fitting

PART #

P-1/8-FFMP-1/4-FFMP-3/8-FFM P-1/2-FFM P-3/4-FFM P-1-FFM

1/8-271/4-183/8-181/2-143/4-14

1-11 1/2

PTM PortTHD NPTF

500050004500300030001750

1/8-271/4-183/8-181/2-143/4-14

1-11 1/2

PT PortTHD NPTF


.328

.422

.563

.688

.8911.125

Ref D1 Drill

.781.091.221.471.591.97

N

.66

.881.021.231.361.62

N1

.55

.75

.871.011.111.40

XX AfterAssy.

9/163/47/8

1 1/161 5/161 5/8


.188

.281

.406

.531

.719

.938

D Drill

LL1D

PT

5756

800.333.2636Omega1.com

Y

N2

D1PT

PipeFittings


P

*D2 DRILL & L2 DRILL DEPTH ARE AN OPTIONAL MANUFACTURING METHOD PER SAE J514

P-1/8-FFF P-1/4-FFFP-3/8-FFF P-1/2-FFF P-3/4-FFF P-1-FFF P-1 1/4-FFF P-1 1/2-FFF

Female Pipe Tee • Female Pipe Thread (all three ends)

Tube FittingPart #

1/8-271/4-183/8-181/2-143/4-14

1-11 1/21 1/4-11 1/21 1/2-11 1/2

PT PortTHD NPTF

50005000450030003000175015001500

.312

.422

.563

.688

.9061.1251.4691.719

Ref D1 DrillDynamic

Pressure Rating

9/163/47/8

1 1/161 5/161 5/81 7/82 1/2


.66

.881.021.231.36.1621.702.08

N1

Male Pipe Adapter • Straight Thread O-Ring/Male Pipe Thread


PT Port THDNPTF

DynamicPressure RtgD2 Drill LC Hex

Female Pipe Adapter • Straight thread O-Ring/Female Pipe Thread

LL AfterAssy.

P-2-1/8-GCFP-4-1/8-GCFP-4-1/4-GCFP-5-1/4-GCFP-6-1/4-GCFP-6-3/8-GCFP-6-1/2-GCFP-8-1/8-GCFP-8-1/4-GCFP-8-3/8-GCFP-8-1/2-GCFP-10-1/4-GCFP-10-3/8-GCFP-10-1/2-GCFP-10-3/4-GCFP-12-1/4-GCFP-12-1/2-GCFP-12-3/4-GCFP-14-1/2-GCFP-14-3/4-GCFP-16-1/2-GCFP-16-3/4-GCFP-16-1-GCFP-20-1-GCFP-20-1 1/4-GCFP-20-1 1/2-GCFP-24-1-GCFP-24-1 1/4-GCFP-24-1 1/2-GCFP-32-2-GCF

Tube FittingPart #

5/16-247/16-207/16-201/2-209/16-189/16-189.16-183/4-163/4-163/4-163/4-167/8-147/8-147/8-147/8-14

1 1/16-121 1/16-121 1/16-121 3/16-121 3/16-121 5/16-121 5/16-121 5/16-121 5/8-121 5/8-121 5/8-121 7/8-121 7/8-121 7/8-122 1/2-12

720072007200720072007200720072007200720060006600660060004800600060004800480048004800480036003600300024003000300024002400

1/8-271/8-271/4-181/4-181/4-183/8-181/2-141/8-271/4-183/8-181/2-141/4-183/8-181/2-143/4-141/4-181/2-143/4-141/2-143/4-141/2-143/4-14

1-11 1/21-11 1/2

1 1/4-11 1/21 1/2-11 1/2

1-11 1/21 1/4-11 1/21 1/2-11 1/2

2-11 1/2

.094

.172

.172

.234

.297

.297

.297

.391

.391

.391

.391

.500

.500

.500

.500

.656

.656

.656

.719

.719

.844

.844

.8751.0781.0781.0781.3441.3121.3441.781

.911.001.161.191.161.281.53.801.131.281.50.811.311.531.631.001.411.721.061.691.001.501.881.001.972.16

11.94

22.06

9/169/163/43/43/47/8

1 1/87/87/87/8

1 1/811

1 1/81 3/81 1/41 1/41 3/81 3/81 3/81 1/21 1/21 5/81 7/8

22 1/42 1/82 1/82 1/42 7/8

.61

.64

.80

.83

.77

.891.14.36.69.841.06.31.811.031.13.41.821.13.471.10.41.911.29.411.381.56.411.351.411.47

T5 Port THDUN/UNF-2A C4 Hex

DynamicPressure RtgI1 LD2 Drill*

Hex Head Plug • Hex Head/Straight Thread O-Ring

L2*

P-2-GPP-3-GPP-4-GPP-5-GPP-6-GPP-8-GPP-10-GPP-12-GPP-14-GPP-16-GPP-20-GPP-24-GPP-32-GP

Tube FittingPart #

5/16-243/8-247/16-201/2-209/16-183/4-167/8-14

1 1/16-121 3/16-121 5/16-121 5/8-121 7/8-122 1/2-12

7200720072007200720072007200720066006600480036002400

7/161/29/165/8

11/167/81

1 1/41 3/81 1/21 7/82 1/82 3/4

.30

.30

.36

.36

.39

.44

.50

.59

.59

.59

.59

.59

.59

.60

.60

.67

.67

.73

.80

.931.091.091.121.201.271.43

.093

.125

.203

.234

.297

.422

.500

.656

.718

.8751.0931.3441.813

.38

.34

.41

.39

.44

.44

.47

.59

.56

.50

.66

.34

.56

PTC1

PT1

LL

L1

D

PT

CT5

LLL

D2

5605SAE 140438

P-FFF

6401SAE 090109B

P-GCM

6405SAE 140425

P-GCF

6408SAE 090109A

P-GP

P-GCM P-GCF P-GPP-FFF

PT PortThread NPTF

PT1 Port THDNPTF

DynamicPressure RtgD Drill L1C1 Hex LL

P-4-1/8-GCMP-4-1/4-GCMP-5-1/4-GCMP-6-1/4-GCMP-6-3/8-GCMP-8-3/8-GCMP-8-1/2-GCMP-10-1/2-GCMP-12-3/4-GCMP-16-3/4-GCMP-16-1-GCMP-20-1 1/4-GCM

Tube FittingPart #

7/16-207/16-201/2-209/16-189/16-183/4-163/4-167/8-14

1 1/16-121 5/16-121 5/16-121 5/8-12

600060006000600060006000600054004800360036003000

1/8-271/4-181/4-181/4-183/8-183/8-181/2-141/2-143/4-143/4-14

1-11 1/21 1/4-11 1/2

.172

.172

.234

.297

.297

.391

.391

.484

.656

.719

.8751.078

1.001.201.201.251.341.361.531.591.801.781.982.02

9/169/165/8

11/1611/167/87/81

1 1/41 1/21 1/21 7/8

.64

.81

.81

.86

.95

.921.091.091.211.191.391.43

5958

800.333.2636Omega1.com N1Y*

D1

PT

LI1D2

C4L2T5

PipeFittings


P

T5F T5MDynamic

Pressure RtgD2 Drill LC Hex

Straight Thread Reducer/ExpanderStraight Thread O-Ring/Female Straight Thread O-Ring Port

LL AfterAssy.

P-4-4-GCFSP-4-6-GCFSP-6-4-GCFSP-6-8-GCFSP-8-6-GCFSP-8-10-GCFSP-10-6-GCFSP-10-8-GCFSP-10-12-GCFSP-12-8-GCFSP-12-10-GCFSP-12-16-GCFSP-16-8-GCFSP-16-10-GCFSP-16-12-GCFSP-16-20-GCFSP-20-6-GCFSP-20-12-GCFSP-20-16-GCFSP-20-24-GCFSP-24-12-GCFSP-24-16-GCFSP-24-20-GCFSP-32-24-GCFS

Tube Fitting Part #

7/16-209/16-187/16-203/4-169/16-187/8-149/16-183/4-16

1 1/16-123/4-167/8-14

1 5/16-123/4-167/8-14

1 1/16-121 5/8-129/16-18

1 1/16-121 5/16-121 7/8-121 1/16-121 5/16-121 5/8-121 7/8-12

540054005400480054003600600048004200540036002400600042004200300036003600240018002400240024001800

7/16-207/16-209/16-189/16-183/4-163/4-167/8-147/8-147/8-14

1 1/16-121 1/16-121 1/16-121 5/16-121 5/16-121 5/16-121 5/16-121 5/8-121 5/8-121 5/8-121 5/8-121 7/8-121 7/8-121 7/8-122 1/2-12

.172

.172

.297

.297

.438

.391

.484

.563

.484

.625

.625

.625

.750

.797

.750

.8751.0631.0631.0631. 631.2501.2501.2501.780

1.081.161.031.381.131.56.811.311.691.001.531.881.001.001.751.971.001.001.881.881.001.001.751.00

11/1613/1611/161 1/16

7/81 1/8

11

1 3/81 1/41 1/41 5/81 1/21 1/21 1/22 1/81 7/81 7/81 7/82 1/22 1/82 1/82 1/82 3/4

.72

.80

.64

.99

.691.12.31.811.19.41.941.29.41.411.161.38.41.41.411.29.41.411.16.38

P-2-CGPP-3-CGPP-4-CGPP-5-CGPP-6-CGPP-8-CGPP-10-CGPP-12-CGPP-14-CGPP-16-CGPP-20-CGPP-24-CGP

Hollow Hex Plug • Hollow Hex/Straight Thread O-Ring

Tube FittingPART #

5/16-243/8-247/16-201/2-209/16-183/4-167/8-14

1 1/16-121 3/16-121 5/16-121 5/8-121 7/8-12


720072007200720072007200720072006600660048003600

.438

.500

.563

.625

.688

.8751.0001.2501.3751.5001.8752.125

1/81/83/163/161/45/163/89/169/165/83/43/4

C5 Hex X Dia.Dynamic

Pressure Rating

.40

.40

.47

.47

.50

.58

.65

.77

.77

.77

.77

.77

L1

.297

.397

.360

.360

.391

.438

.500

.594

.594

.594

.594

.594

I1

T5F

CT5M

LLL

D2

6408-HSAE 090109B

P-CGP6410

P-GCFS

P-GCFSP-CGP

6160

800.333.2636Omega1.com I1

L1

T5

X

C5

PipeFittings


P

C1 HEX ACROSS THE FLATS

SAE140231

PS-FE

PS-FC PS-FE PS-MEPS-C

Male Pipe Adapter • NPSM Swizel / Male Pipe Thread

SAE 140130

PS-CTube Fitting

PART #

PS-2-2-CPS-2-4-CPS-4-4-CPS-4-6-CPS-4-8-CPS-6-4-CPS-6-6-CPS-6-8-CPS-8-6-CPS-8-8-CPS-8-12-CPS-12-8-CPS-12-12-CPS-12-16-CPS-16-12-CPS-16-16-CPS-16-20-CPS-20-16-CPS-20-20-CPS-24-24-CPS-32-32-C

1/81/81/41/41/43/83/83/81/21/21/23/43/43/4111

1 1/41 1/41 1/2

2

Pipe Size

600060006000600060004800480048004200420042002700270027002400240024001950195019501350

1/8-271/4-181/4-183/8-181/2-141/4-183/8-181/2-143/8-181/2-143/4-141/2-143/4-14

1-11 1/23/4-14

1-11 1/211/4-111/2

1-11 1/211/4-11 1/211/2-111/2

2-11 1/2

A1 PipeTHD NPTF


9/1611/1611/167/81

11/167/81

7/81

1 1/41

1 1/41 1/21 1/21 1/21 7/81 1/21 7/82 1/82 5/8

C Hex

9/165/8

11/1613/1615/1611/167/8

15/167/81

1 1/41 1/81 1/41 1/21 3/81 1/21 3/41 7/81 7/82 1/82 5/8

C1 Hex

.156

.219

.219

.344

.469

.219

.344

.469

.344

.469

.641

.469

.641

.844

.641

.8441.1410.8441.1411.3591.813

D Drill

.188

.188

.281

.281

.281

.406

.406

.406

.531

.531

.531

.719

.719

.719

.938

.938

.9381.251.251.5

1.938

D2 Drill

1.091.241.431.451.441.491.511.731.701.912.041.912.042.172.292.372.382.462.472.612.8

W

.941.061.251.251.441.311.311.441.501.621.691.621.691.801.942.002.002.092.092.192.37

L

1/8-271/4-181/4-183/8-181/2-141/4-183/8-181/2-143/8-181/2-143/4-141/2-143/4-14

1-11 1/23/4-14

1-11 1/211/4-111/2

1-11 1/21 1/4-111/211/2-111/2

2-11 1/2

A SwivelTHD NPSM

Female Pipe Elbow • NPSM Swivel / Female Pipe Thread

Tube FittingPART #

PS-2-2-FE PS-4-4-FE PS-6-6-FEPS-8-8-FE PS-12-12-FE PS-16-16-FE PS-20-20-FEPS-24-24-FEPS-32-32-FE

1/81/43/81/23/41

1 1/41 1/2

2

Pipe Size

500050004000350022502000162512501125

1/8-271/4-183/8-181/2-143/4-14

1-11 1/211/4-111/211/2-11 1/2

2-11 1/2

A1 PipeTHD NPTF


9/1611/167/81

1 1/41 1/21 7/82 1/82 5/8

C Hex

9/163/47/8

1 1/161 5/161 5/81 7/82 1/22 4/5

C1 Hex

.156

.219

.344

.469

.641

.8441.1411.3591.813

D Drill

.80

.991.061.241.471.731.832.412.57

M1

.66

.881.021.231.361.621.702.082.39

N3

.951.171.261.531.822.102.212.83

3

W3

1/8-271/4-183/8-181/2-143/4-14

1-11 1/21 1/4-11 1/21 1/2-11 1/2

2-11 1/2

A1 SwivelTHD NPSM

SAE140231

PS-MEMale Pipe Elbow • NPSM Swivel / Male Pipe Thread

Tube FittingPART #

PS-2-2-MEPS-4-4-MEPS-4-6-MEPS-6-4-MEPS-6-6-MEPS-6-8-MEPS-8-6-MEPS-8-8-MEPS-8-12-MEPS-12-6-MEPS-12-8-MEPS-12-12-MEPS-16-12-MEPS-16-16-MEPS-20-20-MEPS-24-24-MEPS-32-32-ME

1/81/41/43/83/83/81/21/21/23/43/43/411

1 1/41 1/2

2

Pipe Size

50005000500040004000400035003500350022502250225020002000162512501125

1/8-271/4-181/4-183/8-183/8-183/8-181/2-141/2-141/2-143/4-143/4-143/4-14

1-11 1/21-11 1/2

11/4-11 1/211/2-11 1/2

2-11 1/2

A PipeTHD NPTF


9/1611/167/8

11/167/81

7/81

1 1/47/81

1 1/41 1/21 1/21 7/82 1/82 5/8

C Hex

7/169/163/43/43/43/47/87/8

1 1/161 1/161 1/161 1/161 5/161 5/161 5/81 7/82 1/2

C1

.156

.219

.344

.219

.344

.469

.344

.469

.641

.344

.469

.641

.641

.8441.1411.3591.813

D Drill

.188

.281

.281

.406

.406

.406

.531

.531

.531

.719

.719

.719

.938

.9381.251.5

1.938

D2 Drill

.70

.88

.99

.99

.991.041.061.111.301.191.241.301.471.541.731.892.27

M1

.851.061.281.171.281.331.351.41.651.481.531.651.821.912.112.312.7

W3

.721.091.091.221.221.221.471.471.471.591.591.591.971.972.382.64

3

N1

1/8-271/4-183/8-181/4-183/8-181/2-143/8-181/2-143/4-143/8-181/2-143/4-143/4-14

1-11 1/21 1/4-11 1/21 1/2-11 1/2

2-11 1/2

A1 SwivelTHD NPSM

Female Pipe Adapter • NPSM Swivel Pipe Thread

SAE 140131

PS-FCTube Fitting

PART #

PS-2-2-FC PS-4-4-FC PS-6-4-FCPS-6-6-FCPS-8-6-FCPS-8-8-FC PS-12-12-FC PS-16-16-FC PS-20-20-FCPS-24-24-FCPS-32-32-FC

1/81/43/83/81/21/23/41

1 1/41 1/2

2

Pipe Size

60006000480048004200420027002400195015001350

1/8-271/4-183/8-183/8-181/2-141/2-143/4-141-111/2

11/4-111/211/2-111/2

2-111/2

A Pipe THDNPTF


9/1611/1611/167/87/81

1 1/41 1/21 7/82 1/82 5/8

C Hex

9/1611/167/87/811

1 1/41 1/21 7/82 1/82 5/8

C1 Hex

.156

.219

.219

.344

.344

.469

.641

.8441.1411.3591.813

D Drill

1.021.431.491.511.651.791.972.372.382.422.55

W1

.871.251.311.311.451.501.622.002.002.002.12

L1

1/8-271/4-181/4-183/8-183/8-181/2-143/4-14

1-11 1/21 1/4-11 1/21 1/2-11 1/2

2-11 1/2

A1 SwivelTHD NPSM

6362

C1A

LW

D2

DC

A1

C1A

L1W1

DC

A1

M1W3

C1

N3 D

A1

C

A

M1W3

C1

N1D

A1

C

AD2

800.333.2636Omega1.com

PipeFittings


PL-JS PL-MP PL-TX M2HCPS-ME-45

P

SAE140330

PS-ME-45 Male Pipe Elbow • NPSM Swivel/Male Pipe Thread

Tube FittingPART #

PS-2-2-ME-45 PS-4-4-ME-45 PS-6-6-ME-45PS-8-6-ME-45PS-8-8-ME-45 PS-8-12-ME-45PS-12-8-ME-45PS-12-12-ME-45 PS-16-12-ME-45PS-16-16-ME-45 PS-20-20-ME-45PS-24-24-ME-45PS-32-32-ME-45

1/81/43/81/21/21/23/43/411

11/411/2

2

PipeSize

5000500040003500350035002250225020002000162512501125

1/8-271/4-183/8-181/2-141/2-141/2-143/4-143/4-14

1-11 1/21-11 1/2

11/4-111/211/2-111/2

2-111/2

A PipeTHD NPTF


9/1611/167/87/81

1 1/41

1 1/41 1/41 1/21 7/82 1/82 5/8

C Hex

7/169/163/47/87/8

1 1/161 1/161 1/161 5/161 5/161 5/81 7/82 1/2

C1

.156

.219

.344

.344

.469

.641

.469

.641

.641

.8441.1411.3591.813

D Drill

.188

.281

.406

.531

.531

.531

.719

.719

.938

.9381.2501.5001.938

D2 Drill

.62

.73

.81

.81

.88

.87

.941.021.121.151.231.351.46

M

.77

.911.101.101.171.221.231.371.471.521.611.771.89

W2

.52

.86

.951.171.171.201.201.201.481.481.671.772.11

N

1/8-271/4-183/8-183/8-181/2-143/4-141/2-143/4-143/4-14

1-11 1/21 1/4-11 1/21 1/2-11 1/2

2-11 1/2

A1 SwivelTHD NPSM

SAE140330

PL-JS Push-On Hose Barb • Push On Hose Barb End/Female JIC Swivel End

Tube FittingPART #

PL-4-4-JSPL-6-6-JSPL-8-6-JSPL-8-8-JSPL-10-10-JSPL-12-12-JSPL-16-16-JS

1/43/81/21/25/83/41

Tube O.D.

7/16 x 209/16 x 183/4 x 163/4 x 167/8 x 14

1-1/16 x 121- 5/16 x 12

T Thread

1.561.811.881.882.582.652.77

A

.81

.95

.95

.951.501.501.50

B

.17

.30

.30

.39

.48

.61

.84

D

.34

.38

.42

.42

.50

.58

.59

K2

9/1611/1611/167/87/8

1-1/41-1/2

H

1/43/83/81/25/83/41

Hose ID

PL-MP Push-On Hose Barb • Push On Hose Barb End/Male Pipe End

Tube FittingPART #

PL-2-4-MPPL-4-4-MPPL-4-6-MPPL-6-4-MPPL-6-6-MPPL-6-8-MPPL-6-10-MPPL-8-6-MPPL-8-8-MPPL-8-10-MPPL-12-12-MPPL-16-16-MP

1/8 x 271/4 x 181/4 x 183/8 x 183/8 x 183/8 x 183/8 x 181/2 x 141/2 x 141/2 x 143/4 x 14

1 x 11 - 1/2

Pipe SizeT-THRD

1.391.581.781.641.781.932.392.032.182.582.612.86

A

.81

.81

.95

.81

.95

.951.5.95.951.51.51.5

B

.39

.57

.57

.57

.57

.57

.57

.76

.76

.76

.76

.95

C

.19

.19

.28

.19

.30

.39

.48

.30

.39

.50

.61

.84

D

7/169/169/1611/1611/1611/167/87/87/87/8

1-1/81-3/8

H

1/41/43/81/43/81/25/83/81/25/83/41

Hose ID

M2HCHose Barb Connector • Hose Barb End/Male Pipe End

Tube FittingPART #

1/8M2HC1/81/4M2HC1/81/8M2HC1/41/4M2HC1/43/8M2HC1/41/2M2HC1/41/4M2HC3/83/8M2HC3/81/2M2HC3/81/4M2HC1/23/8M2HC1/21/2M2HC1/25/8M2HC1/23/4M2HC1/21/2M2HC3/43/4M2HC3/41M2HC3/43/4M2HC11M2HC1

1/8 x 271/8 x 271/4 x 181/4 x 181/4 x 181/4 x 183/8 x 183/8 x 183/8 x 181/2 x 141/2 x 141/2 x 141/2 x 141/2 x 143/4 x 143/4 x 143/4 x 14

1 x 11-1/21 x 11-1/2

Pipe SizeT-THRD

1.001.411.221.591.711.821.621.721.811.841.852.002.002.092.042.132.312.402.50

A

.39

.39

.57

.57

.57

.57

.57

.57

.57

.76

.76

.76

.76

.76

.76

.76

.76

.95

.95

B

.41

.78

.41

.78

.88

.94

.78

.88

.94

.78

.88

.94

.941.03.941.031.131.031.13

C

.078

.188

.078

.188

.281

.281

.188

.297

.375

.188

.297

.375

.500

.531

.375

.625

.625

.625

.780

D

7/167/169/169/169/165/8

11/1611/1611/167/87/87/87/8

1-1/161-1/161-1/161-3/161-3/81-3/8

H

1/81/41/81/43/81/21/43/81/21/43/81/25/83/41/23/41

3/41

Hose ID

.160

.303

.160

.303

.450

.600

.303

.450

.600

.303

.450

.600

.725

.900

.600

.9001.173.9001.173

Barb O.D.Max

PL-TXPART #

PL-4-4-TXPL-6-6-TXPL-8-8-TX

1/43/81/2

Tube

7/16-209/16-183/4-16

T Thread

1.571.782.06

A

.81

.95

.95

B

.550

.556

.657

C

.17

.30

.39

D

1/25/8

13/16

Hex

1/43/81/2

Hose

BA

D

H

T

K2B

A

CD

H T

37°

Plastic Hose Stop Plastic Hose Stop TH

Plastic Hose Stop

BA

CD

TH

CA

B

6564

MW2C1

N

D

A1

C

AD2

PipeFittings

D

Our unique manufacturing processoffers the most economical productionof braid bands supported with yearsof engineering experience behindthe manufacturing of our products.Our products and services are designedaround the needs of today’s metal hosefabricators.

BB

M

Solid Braid Bands

Call toll free:

800.333.2636

M-1M-2M-3M-4M-5M-6M-7M-8M-9M-10M-11M-12M-13M-14M-15M-16M-17

A-18A-19A-20A-21A-22A-23A-24A-25A-26A-27A-28A-29A-30A-31

B-32B-33B-34B-35B-36B-37B-38B-39B-40

C-41C-42C-43C-44C-45C-46C-47C-48C-49C-50C-51C-52C-53C-54C-55C-56

.405

.420

.435

.450

.465

.480

.495

.510

.525

.540

.555

.570

.585

.600

.615

.630

.645

.660

.675

.690

.705

.720

.735

.750

.765

.780

.795

.810

.825

.840

.855

.870

.885

.900

.915

.930

.945

.960

.975

.990

1.0051.0201.0351.0501.0651.0801.0951.1101.1251.1401.1551.1701.1851.2001.2151.230

••••••••••••••••••••••••••••••••••••••••••••••••••••••••

••••••

•••••••••••••••••••••••••••••••••••••

•••••••••••••••••••••••••••••••••••••••••••••

•••••••••••••••••••••••••••••••••••••••

SS ST C MSizeI.D.

(Fit Size)Material

SS ST C MSizeI.D.

(Fit Size)Material

SS ST C MSizeI.D.

(Fit Size)Material

D-57D-58D-59D-60D-61D-62D-63D-64D-65D-66D-67D-68D-69D-70D-71D-72D-73

E-74E-75E-76E-77E-78E-79E-80E-81E-82E-83E-84E-85E-86E-87E-88E-89E-90E-91E-92E-93E-94E-95E-96

F-97F-98F-99F-100F-101F-102F-103F-104F-105F-106F-107F-108F-109F-110F-111F-112F-113F-114F-115F-116

1.2451.2601.2751.2901.3051.3201.3351.3501.3651.3801.3951.4101.4251.4401.4551.4701.485

1.5001.5151.5301.5451.5601.5751.5901.6051.6201.6351.6501.6651.6801.6951.7101.7251.7401.7551.7701.7851.8001.8151.830

1.8451.8601.8751.8901.9051.9201.9351.9501.9651.9801.9952.0102.0252.0402.0552.0702.0852.1002.1152.130

F-117F-118F-119F-120F-121F-122F-123F-124F-125F-126F-127F-128F-129F-130F-131F-132

FX-133FX-134FX-135FX-136FX-137FX-138FX-139FX-140FX-141FX-142FX-143FX-144FX-145FX-146FX-147FX-148aFX-148bFX-148cFX-148dFX-148eFX-149aFX-149bFX-149cFX-149dFX-149e

G-150G-151G-152G-153G-154G-155G-156G-157G-158G-159

H-160H-161H-162H-163H-164H-165H-166H-167

2.1452.1602.1752.1902.2052.2202.2352.2502.2652.2802.2952.3102.3252.3402.3552.370

2.3852.4002.4152.4302.4452.4602.4752.4902.5052.5202.5352.5502.5652.5802.5952.6102.6252.6402.6552.6702.6852.7002.7152.7302.745

2.7502.7652.7802.7952.8102.8252.8402.8552.8702.885

2.9002.9152.9302.9452.9602.9752.9903.005

••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••

•••••••••••••••••••••••••••••••••

•••••••••••••••••••••

•••••••••••••••••

••••••••

••••••••••••••••

•••••••••••••••

•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••

••••••••••••••••

••••••••

••••••••••••••••••

A

B

C

D

E

F

F

FX

G

H

Features

I.D. - Formed in variable band types to accommodate a range of hose sizes

Materials - Stainless 304 & 316, Copperand Monel

Width - A variety of widths available tosuit your needs, or preference

Thickness - Variable material (wall) thick-ness available in each material type

Impression Branding - Braid bands fit over hose and can be imprinted to reflect the necessary information or your company logo.

AMFM Braid Bands - Quality Braid Bands manufactured to meet the requirements of the metal hose industry.

1

2

3

4

5

1

2

34

5

1 2 3

Part Number Description CategoryM through H - See Detail Chart

Size Number1 through 67 - (.405 through .3005 I.D.) See Detail Chart

1

2

Material CodeSS = 304 SS ST= 316 SS C = Copper M = Monel

3

Non-Standard WidthAll widths other than standard are indicated in 1/16” increments (i.e.: - 4 = 1/4” width; - 10 = 5/8” width; - 22 = 1 3/8” width)NOTE: Only required when width is NOT standardSee Width Notes

4

C - 53 SS

AM

FM

BR

AID

BA

ND

S

67

BB

Solid Braid Bands

Braid Band Specifications

I.D.(Fit Size)

Width

WallThickness

Material

AMFM Incorporated Braid Bands are manufactured to a “Fit Size” reflecting the hose size the band ID is produced to accommodate. There are two methods of specification:

1. AMFM Standard Specification, designated by AMFM part number, fit size indicated in ID column of catalog.

2. Customer Part Number Control, see Production Control section of this catalog for details.

Braid Bands are manufactured to “Fit Size”. Fit size can only be accurately determined at time of manufacture. Parts are subject to changes from handling, secondary operation, packaging and shipping. These changes do not affect the Fit Size for this intended use, unless the parts are mechanically deformed. Due to these minor dimension changes from handling. AMFMCANNOT provide parts to specific minimum or maximum dimensions, as it will cause limitation and incorrect Fit Size. Referencethe Hose Sizing section (page 4) of this catalog for detail regarding properly sizing AMFM Incorporated braid bands.

STANDARD TOLERANCE: “Fit Size” + .010 / - .005

Standard Widths indicated below or Non-Standard Width as indicated by the part number. Non-standard widths are indicated asshown in the Part Number Description . All usable widths can be supplied. Delivery is subject to non-standard lead times depending on the specific requirements. Many alternate widths are available in as standard stock. Any width can be made standard stock with ongoing demand. Parts manufactured by Customer Specification require width indication.

Material M A B C D E F FX G H

SS, ST, M .375 .500 .625 .625 .750 .750 .750 .750 .750 .750

C .375 .500 .500 .625 .625 .750 1.00 -- -- --

STANDARD TOLERANCE: Overall Width: + .060 / - .060

AMFM Incorporated Braid Bands have standard wall thickness as reflected by the chart below.

Material M A B C D E F FX G H

SS, ST .035 .049 .049 .049 .049 .049 .049 .049 .065 .065

C .049 .049 .049 .055 .055 .055 .050 -- -- .068

M -- .048 .037 .037 .037 .065 .065 -- -- --

STANDARD TOLERANCE: Varies by Materials +/- .0075 (max.)

Parts are produced in selected Standard Materials as indicated in charts.

304 Stainless Steel (SS) ASTM 304 Stainless Steel (material certification available)

316 Stainless Steel (ST) ASTM 316 Stainless Steel (material certification available)

Copper (C) Alloy 122 Hard Cooper

Monel (M) Alloy 400 – M (material certification available)

4

Sizing AMFM Braid BandsAMFM Braid Bands must be sized for each individual hose and configuration. This is specified Fit Size as defined in the specifica-tions section of this catalog.

• The AMFM sizing gauge was developed exclusively for use with braided metal hose toindicate the appropriate AMFM Braid Band for the hose being measured.

• Selecting size from catalog dimensions from hose manufacturer or measuring hose withoutconsulting factory is not recommended.

• More than one “standard” size increment will fit a braided hose with nominal differenceexcept in smaller hose sizes (under 1”).

• Double braid hoses generally require the equivalent increase of approximately threestandard sizes over the single braid size.

• AMFM Braid Bands offer very close consistency and in some instances can exceed that ofthe hose. This may require alternate bands when a very tight fit is used that leaves no ability to consume a minor increasein hose diameter.

Edge Protrusion

This value can only be determined at the time of manufacture in most sizes; Due to handling as mentionedin ID Section. Acceptable tolerances applied at time of manufacture do not affect the part “Fit Size”.

Referring to general edge condition. Single point protrusion or burr, with specification maximum of .0075”and .005”, respectively. All edges burr free and square.

With reference perpendicular to ID, part edge variations can deviate in parallel, part square, or basicmaterial irregularities. Variations can involve a single edge or both. Specification calls for a maximum“gap distance” when measuring with reference to ID surface and corresponding perpendicular edge.Gap Specifications vary from .010” to .040” depending on part size and material.

Out of Round

Edge VariationEdge (Parallel &Square)

Certification AvailableAMFM Incorporated Braid Bands are manufactured to be used as temporary welding fixtures in the fabrication of industrialuse metal hose assemblies only. No other usage or application is intended or recommended. To the extent that such productsare used for any other purpose, AMFM INCORPORATED disclaims both their merchantability and fitness for such unintendeduse. There are no warranties which extend beyond the description contained herein.

Parts Characteristics & Features

AM

FM

BR

AID

BA

ND

S

6968

800.333.2636Omega1.com

WB - 200 - S 08 SS

Width

304SS

Available Weight

Profile 200 and Under

Availability

Profile 250 and Over

316SS

Copper

Monel

LightStandard

HeavyLight

StandardHeavy

StandardHeavy

Standard

.028

.048

.060

.028

.048

.060

.048

.060

.048

-08 -12 -16 -08 -12

Material Type and Thickness

Imprinting Wrapped BandsThe same considerations provided when welding imprinted braid bands to metal hosemust be considered when imprinting wrapped bands. Minimum band width typicallyrequired is 3/4”. Reference the Imprinting section for full details.

Product CodeWB = Wrapped BandBC = Bulk CoilCS = Cut Strip Available

Profile (I.D.)Wrapped Bands

075 = 3/4”100 = 1”150 = 1 1/2”200 = 2”250 = 2 1/2”300 = 3”400 = 4”500 = 5”600 = 6”800 = 8”1000 = 10”1200 = 12”

1 2 3 4 5

1

2

3

5 Material CodeSS = 304ST = 316C = CopperM = Monel

Material Width-08 = 1/2”-12 = 3/4”-16 = 1”-20 = 1 1/4”-24 = 1 1/2”

Material ThicknessLight = .028Standard = .048Heavy = .060 Wrapped Bands

.065 Bulk Coil

Wrapped Bands

Material Weight Available WidthsAvailable Lengths

LightStandard

HeavyLight

StandardHeavyLight

StandardHeavyLight

Standard

.028

.048

.060

.028

.048

.060

.028

.048

.060

.032

.048

•••

••

••

25’ 08•

•

•

304Stainless Steel

Material Weight Available Widths

316Stainless Steel

Copper

Monel

LightStandardHeavy

StandardHeavy

StandardHeavy

LightStandard

.028

.048

.060

.048.1

.048

.1

.032

.048

08•

•

•

12••

••

•

16

••

••

•

••

••

•

12 16

••

••

•

20

•

2450’•••

••

••

100’ RDMPOA

••

POAPOA

POAPOA

Monel Bulk coil is availablein 8’-10’ coil lengths only.Consult factory for details

POA – These items are non-stock, consult factory for lead times and availability.

Cut Strip

All cut strip lengths are available ona custom basis. Lengths are notstocked with out prior arrangement.Lengths based on customerspecification.

Stainless Steel

Copper

Monel

Material Thickness

Light Standard Heavy+.075/-.075

+.075/-.075

+.030/-.030

.026 to .031

--

.030 to .034

.046 to .053

.047 to .053

.047 to .053

.057 to .065

.061 to .066

--

Stainless 304 & 316

Copper - 110 Alloy

Monel - 400 Alloy

Length Tolerance: All Bulk Coil carries a plus only tolerance.

Material Alloy/Grade

I.D./O.D.

Shipping Wt.

25’ Coil10’ Coil 50’ Coil 100’ Coil Random Coil

10”/11”

1 to 3#

9”/11”

2 to 7#

8 1/2” / 11”

3 to 13#

7”/11”

13 to 26#

12”/22”

36 to 70#

• •• •

200 Only

•200 Only

•

•

••

Consult Factory

Standard Wrapped BandsAvailability

Bulk Coil

POA•

POA

POAPOA

POAPOA

304SS

316SS

Copper

Monel

4

Availability

Bulk Coil Specifications

BC - RDM - S 16 SS

Bulk Coil

10 = 10’25 = 25’50 = 50’100 = 100’RDM = Random

AMFM Incorporated Bulk Stripis packaged conveniently for easystorage and use.1

Material

AM

FM

BR

AID

BA

ND

S

7170

BCWB

800.333.2636Omega1.com

Custom imprinting offers increased flexibility for your metal hose fabrication. AMFM Incorporated imprinting programs allow you tocustomize assemblies to reflect important information. Typical applications include:

• Company name recognition• Assembly dating • Application information critical to end user

Custom Imprinting

Type SizingBand width is important when considering type size. Small braid bands and narrow width wrapped bands have limited imprint-ing surface. For small parts, small type sizes is advisable. Consult factory for application questions.

Standard allocation for all programs includes allocation of 1/8” above and below the imprint area. Collars used as an ID tag donot require the additional space.

Note: Non-standard width part required for M and A series braid bands requiring two lines of flexible imprint. Consult factoryfor details; parts not welded to metal hose (used as tag) may not require non-standard width.

Fixed and Flexible programs detailed on the following pages.

Possible

Line Art/Company Logo Options:

A M

F M

Single Line Imprint

Two Line Imprint

AMFM Inc.800-333-2636

Unprinted area, approx. 1/8”


AMFM Inc.



Wide range of type availability

Variable letter spacing

3 or more lines, single set up

Logo or special type

Imprinting all products

Change set up per release

Economical occasional user

Immediately available

FeatureFIXED

ProgramFLEXIBLE Program

•

•

•

•

•

•

•

•

•

•

Fixed Imprinting Program

Typical Type Sizes

Characters Per Line

3/32”

Approx. 14

1/8”

Approx. 10

5/32”

Approx. 8

Fixed Imprint Types

Part Width Requirement

Features

Single Line

Imprint area 1/4”

• Imprinting single or multiple lines is possible.

• Types size independent per line.

• Line order changeable.

• Multiple single lines can be established and used interchangeably as required.

• Requires more space for imprint than single block

• Run full imprint only

• Type sizes variable per line

• Line order fixed

• Tighter spacing allowing more imprinton less space.

Two SeparateInterchangeable Lines

Imprint area 1/2”

Single Block

Imprint area 5/32”

• Permanent set up or company logo for long-term use.• Specify standard with your order for no hassle purchasing.

The Fixed Imprinting program allows customers to establish a permanent imprint that cannot be changed. This allows for maximum investment for long-term use of a standard imprint. The fixed program may be combined with flexibleprogram options.

Fixed Program Specifications

Flexible Imprinting Program

Type Size

3/32”

1/8”

Overall Height Requirement(2 line of imprint)

11/32”

3/8”

Characters/Spaces Per Line

14

10

Type Specifications

NOTE: Non-standard width part required for M and A series braid bands requiring two lines of flexible imprint. Consult factory for details;parts not welded to metal hose (used as tag) may not require non-standard width.

Imprinting Program InformationAdditional information may be included on a second imprint run on the side opposite of the first imprint. Double run imprints requires additional set up and run charges, consult price sheet or factory for details.

AMFM Recommendation: For dating applications we recommend referencing the quarterand year. This allows you flexibility as far as dating your assemblies without wasting valuable inventory.

XYZ HOSEJOB#986

FIXED

FLEXIBLE

• Ideal for one time marking or special identification limited occurrence• Easy to specify as needed on per-order basis

The Flexible Imprinting program allows customers to set up a one time or limited occurrence imprint as needed. Use of our flexibleworksheet allows for easy ordering and can be attached to any purchase order.

Custom Imprinting

Letters:

Numbers:

Symbols:

A through Z (uppercase only)

0 through 9

# - / ‘ “ .

Not Possible

AMFM

Incorporated

InformationType Size

AM

FM

BR

AID

BA

ND

S

7372

800.333.2636Omega1.com


Weld Fittings

WF

Call toll free:

800.333.2636

BHC 1/4BHC 3/8BHC 1/2BHC 3/4BHC 1BHC 1 1/4BHC 1 1/2BHC 2

Buttweld Hose Connector • Buttweld Hose End/Male Pipe End

PART #

1/4 x 183/8 x 181/2 x 143/4 x 14

1 x 11-1/21-1/4 x 11-1/21-1/2 x 11-1/2

2 x 11-1/2

Pipe SizeT-Thread

1/43/81/23/41

1-1/41-1/2

2

Weld Size

1.191.251.441.501.691.942.132.19

A

.50

.57

.69

.76

.88

.981.011.04

B

.25

.38

.50

.751.001.251.502.00

D

9/1611/167/8

1-1/161-5/161-3/4

2 2-1/2

H

40003500300025002000125010001000


BHC

BHFC 1/4BHFC 3/8BHFC 1/2BHFC 3/4

Buttweld Hose Female Connector • Buttweld Hose End/Male Pipe End

PART #

1/4 - 183/8 - 181/2 - 143/4 - 14

Pipe SizeT-Thread

1/43/81/23/4

Weld Size

1.251.571.631.70

A

.25

.38

.50

.75

D

3/47/8

1-1/81-3/8

H

4000350030002500


BHFC

BHJS 1/4BHJS 3/8BHJS 1/2BHJS 5/8BHJS 3/4BHJS 1BHJS 1 1/4BHJS 1 1/2BHJS 2

Buttweld Hose JIC Swivel • Buttweld Hose End/Female JIC Swivel End

PART #

1/43/81/25/83/41

1-1/41-1/2

2

Tube Size

1.321.421.431.651.661.862.132.232.58

A

.25

.38

.50

.63

.751.001.251.502.00

D

9/1611/167/8

1 1/161-1/41-1/2

22-1/42-7/8

H1

600054004800480042003000300024001800


BHJS7/16 x 209/16 x 183/4 x 167/8-14

1-1/16 x 121-5/16 x 121-5/8 x 121-7/8 x 122-1/2 x 12

Tube End UN/UNF-2A T-Thread

1/43/81/21/23/41

1-1/41-1/2

2

Weld Size

.17

.30

.39

.48

.61

.841.081.311.78

D1

.35

.38

.43

.50

.57

.60

.63

.74

.94

K2 H2

9/1611/167/87/8

1-1/161-5/161-3/4

22-1/2

Weld End FittingsAMFM Quality ComponantsEngineered to Complete your Fabrication

75

DHT

BA

.438

30°WeldSize

D H1

T

A.438

WeldSize

37°

AK2 .44

D

WeldSize

H2

T

BHC BHFC BHJS

Carbon Steel304 SS316 SS

316 SS

Carbon Steel316 SS


CS40

PF Length 04 06 08 12 16 20 24 32 40 48 64

3 (1 1/2”) • • • •4 (2”) • • • • • •5 (2 1/2”) • • • • 6 (3”) • • • • • • • • • • •

Material

Pipe Fittings

CS80

SS40

Availability

Product CodePF = Pipe Fitting

Fitting Size04 = 1/4” 08 = 1/2” 16 = 1” 24 = 1 1/2” 48 = 3” 06 = 3/8” 12 = 3/4” 20 = 1 1/4” 32 = 2” 64 = 4”

1

2

Fitting Length3 = 1 1/2” 4 = 2” 5 = 2 1/2” 6 = 3” (Does NOT apply to Hex Male Fittings)

3

Material CodeCS40 = Carbon Steel / Schedule 40 SS = 304 Stainless SteelCS80 = Carbon Steel / Schedule 80 ST = 316 Stainless Steel

Code Fraction (Inches)

1/161/83/161/45/163/87/161/29/165/8

11/163/4

13/167/8

15/16No fraction

PF - 16 - 3 SS1 2 3 4

01020304050607080910111213141516

4

Part Number Description

Thread One EndPipe Fittings

3 (1 1/2”) 4 (2”) • • • • • •5 (2 1/2”) • • 6 (3”) • • • • • • 3 (1 1/2”) • • • •4 (2”) • • • • • 5 (2 1/2”) • •

Part Specifications

1/41/41/43/83/83/81/21/21/23/43/43/41 1

1 1/41 1/41 1/41 1/21 1/21 1/2

2 2 2

2 1/22 1/2

3 3 4

1.5002.0003.0001.5002.0003.0001.5002.0003.0001.5002.0003.0002.0003.0002.0002.5003.0002.0002.5003.0002.0002.5003.0002.5003.0002.5003.0004.000

0.5400.5400.5400.6750.6750.6750.8400.8400.8401.0501.0501.0501.3151.3151.6601.6601.6601.9001.9001.9002.3752.3752.3752.8752.8753.5003.5004.500

0.0880.0880.0880.0910.0910.0910.1090.1090.1900.1130.1130.1130.1330.1330.1400.1400.1400.1450.1450.1450.1540.1540.1540.2030.2030.2160.2160.237

18 18 18 18 18 18 14 14 14 14 14 14

11 1/211 1/211 1/211 1/211 1/211 1/211 1/211 1/211 1/211 1/211 1/2

8 8 8 8 8

0.59460.59460.59460.60060.60060.60060.78150.78150.78150.79350.79350.79350.98450.98451.00851.00851.00851.00851.00851.02521.05821.05821.05821.57121.57121.63371.63371.7337

SizeOverallLength

ThreadsPer Inch

ThreadLengthO.D. Wall

PF Carbon Steel Schedule 40

1/43/81/21/23/43/41

1 1/41 1/21 1/2

2

1.5001.5001.5002.0001.5002.0002.0002.0002.0002.5002.500

0.5400.6750.8400.8401.0501.0501.3151.6601.9001.9002.375

0.0880.0910.1090.1090.1130.1130.1330.1400.1450.1450.154

18 18 14 14 14 14

11 1/211 1/211 1/211 1/211 1/2

0.59460.60060.78150.78150.79350.79350.98451.00851.02521.02521.0582

Pipe Fitting 304 Stainless Steel Schedule 40

SizeOverallLength

ThreadsPer Inch


1/21/23/43/41 1

1 1/41 1/41 1/21 1/21 1/2

2 2 2

2 1/22 1/2

3 3 4

2.0003.0002.0003.0002.0003.0002.0003.0002.0002.5003.0002.0002.5003.0002.5003.0002.5003.0003.000

0.8400.8401.0501.0501.3151.3151.6601.6601.9001.9001.9002.3752.3752.3752.8752.8753.5003.5004.500

0.1470.1470.1540.1540.1790.1790.1910.1910.2000.2000.2000.2180.2180.2180.2760.2760.3000.3000.337

14 14 14 14

11 1/211 1/211 1/211 1/211 1/211 1/211 1/211 1/211 1/211 1/2

8 8 8 8 8

0.78150.78150.79350.79350.98450.98451.00851.00851.00851.00851.00851.05821.05821.05821.57121.57121.63371.63371.7337

SizeOverallLength

ThreadsPer Inch


PF Carbon Steel Schedule 80

To accompany or band products AMFM Incorporated offers quality weld end components to complete your fabrication requirements.

7776

WF

800.333.2636Omega1.com

Weld Fittings

Slotted End

S4-201-S (length) SS








3”

Availability

2 1/16” (2.063 “)

2 9/16” (2.563”)

3 1/16” (3.063”)

3 9/16” (3.563”)

4 1/16” (4.063”)

4 9/16” (4.563”)

5 1/26” (5.063”)

6 1/16” (6.063”)

••••••••

4”

•

••

6”

•

•

Above 6”

••••••

Part Number Standard I.D.

Standard weight 304 SS

As in material listing, (currently) standardweight material.

Nominal (.049)

304 Stainless Steel

Select ID based on diameter the slotted end ismade to fit over. Slotted Ends can be supplied in asingle ID only, multiple size units not available.

• Standard slot width (SW) (1/8”) is typical, depending on application.

• Slot depth (SD) should consider the overlap ofmating part and clamping configuration (also seelength).

• Slots spacing (SS) based on ID of fitting, witheach two slots allowing .080 of reduction (see ID).Odd amounts not recommended.

.030” to .050” over mating diameter

1/16”+ over mating diameter

Below 2” ID, two slotsrecommended

Use standard slotswhere possible, consultfactory on variations.

Overall length of the unit is determined lengthrequirement of the fitting. Consider slots and attachment to flexible hose application and installation requirements.

Maximum length of6” or less.

As required to 12”.

Consult factory to evaluate your requirements.AMFM Incorporated can stock slotted ends manufactured to custom specification

Custom Configuration

Product CodeS = Slotted End SC = Custom Slotted End

Slot Info2 = 2 slots/std. 4 = 4 slots/std.

1

2

Part IDFirst digit = Whole inch Second/third digits = fractional designation(See code to left)

3

Material Weight S = Standard4

Length Length inches5

Material type SS = 304 Stainless Steel 6

Wall

Material

Feature

I.D.

Length

Slots

Detail 2” I.D. and Lower 2 1/2” I.D. and Above

Standard Profile

79

SES 4 - 200 - S 08 SS

Wall

Standard weight 304 SS

Wall thickness is based on standard materialfor standard applications.

This is a reference size resulting from the manufac-tured ID and wall thickness. Any part sizing by thisdimension must result from customer specificationusing custom specification.

A reference dimension, unless requested using a custom specification.

Nominal (.049)

304 Stainless SteelMaterial

Feature Detail

O.D.

Slots

Parts are sized to fit over the mating fitting. Partsare manufactured to the plus tolerance of the specified size. Slotted Ends are designed to reduce ID from external clamp onto mating part.

Slots set at recommended depths for standard partsshown in chart. Depth can be specified to alternatedimensions reflecting custom specification. Standarddepth will allow fitting to provide required ID reduction.

Slots are available in standard configuration Standard 1/8” width (+/- 1/32”)SW Slot Width

SD Slot Depth

SS Slot Spacing

Manufactured +/- 1/32”tolerance. Closer toler-ance in standard andcustom available.

Manufactured + 1/16”tolerance. Sizing incre-ments specified in 1/16”to 1/8” increments.

1/2” standard through2” (+/- 1/64”)

7/8” standard above 2”(+/- 1/64”)

Slots are spaced based on the number of slots specified allowing for spacing in equal increments.This also is in response to the required amount oftypical ID reduction.

Part length specified to accommodate interface ofthe mating fitting with slotted end, with non-slottedportion to accommodate attachment and requiredtransition length.

2 slots standard equal180 degree spacing.

4 slots standard equal90 degree spacing

Smaller diameters usually require shorterlengths with parts in this range not availablein lengths over 6”. See standard profiles(+/- 1/8”)

Parts in larger sizes canaccommodate addi-tional length. See stan-dard profiles (+/- 1/8”)

I.D. Fit Size

2” I.D. and Lower 2 1/2” I.D. and Above

Length

Part Number Description

Code Fraction (Inches)

1/161/83/161/45/163/87/161/29/165/8

11/163/4

13/167/8

15/16No fraction

Slotted end fittings offer a wide variety of I.D. sizes in standard or non-standard dimensions. Their slotted ends allow for clamping to attach the metal hose assembly.

1 2 3 4 5

01020304050607080910111213141516

6

Slot End Fittings

Slotted End Specifications

78

800.333.2636Omega1.com

P 800.333.2636

F 888.900.1615

[email protected]

www.Omega1.com

OmegaOne

Made in the USA

Fittings. Made. Easy.€¦ · 316 Stainless Steel Fittings Flared Fittings TX TX Flared Fittings...

Documents

Transcript of Fittings. Made. Easy.€¦ · 316 Stainless Steel Fittings Flared Fittings TX TX Flared Fittings...