Fittings & Accessories for PE Pipe - Plasson | Ne pushfit electrofusion valves metering repair...

mechanical pushfit electrofusion

valves metering repair clamps

threaded tools/accessories specialist tooling

Fittings & Accessories for PE Pipe2014 Price Catalogue

www.plasson.co.uk

Welcome to PlassonPlasson’s extensive range of solutions for connecting PE pipe is found in over 80 countries worldwide. Plasson’s innovative products have revolutionised the way of connecting polyethylene pipes. Starting with fittings for agricultural irrigation, this developed into designing products for urban water distribution. We have achieved superior designs and products, the widest range of fittings and adaptors and a genuine commitment to quality, delivery and service. Nowadays, water delivery systems in some of the world’s great cities, owe their excellence to Plasson’s innovative research and development.

Offering fittings and valves for mechanical, pushfit and electrofusion applications including: water supply, agriculture, landscape irrigation, industrial, waste water and telecommunications, Plasson are proud to be truly world leaders in the production of plastic pipe fittings.

www.plasson.co.uk2

index

Plasson UK Ltd. Plasson House, Albert Drive, Burgess Hill, West Sussex RH15 9TN.Tel: 01444 244446 | Fax: 01444 258683 | Email: [email protected]

mechanical

pushfit

electrofusion

valves

metering

repair clamps

threaded

tools/accessories

specialist tooling page 56-57

fitting instructions

technical details

page 4-21

page 22-27

page 28-37

page 38-45

page 46-49

page 50-51

page 52-53

page 54-55

page 58-61

page 62-63

contacts page 66

terms & conditions page 67

3

index

notes

www.plasson.co.uk

mechanical

4

MECHANICAL FITTINGS Tried & Tested: Plasson mechanical fittings for Polyethylene pipe have been in continuous use for over 50 years.

Proven Reliability: Millions of Plasson fittings are providing safe and reliable connections for water mains throughout the world.

Simple to Use: The captive ‘O’ ring seal provides lifetime protection against leakage and requires no nut tightening to achieve a seal.

Problem Solving: The system is designed for connection to many pipe types and materials providing compatibility with existing systems.

Robust in the Extreme: The fitting is made from virgin Polypropylene for immense impact strength and stress resistance.

Simplifying the Job: Huge range of types, sizes and patterns of fitting with many unique solutions to everyday problems.

The Comprehensive Solution: Complimentary range of valves, accessories and threaded products to provide a total solution to your network needs.

Best in Class: Approved by major European and global agencies for use on potable water demonstrating it is a quality product.

mechanical

5

mechanical

7010 Coupler

Code d Bag £ ea7010BB0 16 10 3.02 7010CC0 20 10 3.78 7010DD0 25 10 4.04 7010EE0 32 5 9.49 7010FF0 40 1 20.13 7010GG0 50 1 20.96 7010HH0 63 1 30.63 87010JJ 75 1 52.03 87010KK0 90 1 60.01 87010LL0 110 1 104.61 7010MM0 125 1 225.26 17010P0 160 1 251.44

7110 Reducing Coupler

Code d Bag £ ea7110CB0 20 x 16 10 6.91 7110DB0 25 x 16 10 7.58 7110DC0 25 x 20 10 7.58 7110EC0 32 x 20 5 12.83 7110ED0 32 x 25 5 12.83 7110FD0 40 x 25 1 21.75 7110FE0 40 x 32 1 21.75 7110GD0 50 x 25 1 25.47 7110GE0 50 x 32 1 29.11 7110GF0 50 x 40 1 29.11 7110HD0 63 x 25 1 31.09 7110HE0 63 x 32 1 36.84 7110HF0 63 x 40 1 36.84 7110HG0 63 x 50 1 36.84 87110JG0 75 x 50 1 48.40 87110JH0 75 x 63 1 48.40 87110KH0 90 x 63 1 64.31 87110KJ0 90 x 75 1 64.31 87110LK0 110 x 90 1 110.61

7610 Repair Coupler

Code d Bag £ ea7610CC0 20 10 4.55 7610DD0 25 10 5.46 7610EE0 32 5 12.32 7610FF0 40 1 22.24 7610GG0 50 1 25.16 7610HH0 63 1 35.11 87610JJ0 75 1 51.51 87610KK0 90 1 69.50 87610LL0 110 1 118.62 7610MM0 125 1 238.27

7120 End Plug

Code d Bag £ ea7120C00 20 10 4.65 7120D00 25 10 5.97 7120E00 32 5 8.68 7120F00 40 1 13.51 7120G00 50 1 18.04 7120H00 63 1 30.22 87120J00 75 1 39.20 87120K00 90 1 53.24 87120L00 110 1 63.40

7940 Modular Adaptor

Code d Bag £ ea7940C00 20 1 5.16 7940D00 25 1 5.65 7940E00 32 1 10.23 7940F00 40 1 14.47 7940G00 50 1 22.77 7940H00 63 1 33.09

Code d Bag £ ea7250255 25 x 1/2” 1 6.13 7250257 25 x 3/4” 1 6.13 7250325 32 x 1/2” 1 6.55 7250327 32 x 3/4” 1 6.55 7250321 32 x 1” 1 6.55 7250401 40 x 1” 1 8.00 7250408 40 x 1 1/4” 1 8.00 7250405 40 x 1 1/2” 1 8.00 7250501 50 x 1” 1 11.62 7250508 50 x 1 1/4” 1 11.62 7250505 50 x 1 1/2” 1 11.62 7250502 50 x 2” 1 11.62 7250631 63 x 1” 1 16.89 7250638 63 x 1 1/4” 1 16.89 7250635 63 x 1 1/2” 1 16.89 7250632 63 x 2” 1 16.89 7250625 63 x 2 1/2” 1 16.89 7250715 75 x 1 1/2” 1 26.02 7250752 75 x 2” 1 26.02 7250725 75 x 2 1/2” 1 26.02 7250753 75 x 3” 1 26.02

7250 Threaded Adaptor

www.plasson.co.uk

mechanical

6

7020 Male AdaptorMetric x MI BSP

Code d Bag £ ea7020B00 16 x 3/8” 10 2.50 7020B10 16 x 1/2” 10 2.50 7020B20 16 x 3/4” 10 2.50 7020C10 20 x 1/2” 10 3.53 7020C20 20 x 3/4” 10 3.78 7020C30 20 x 1” 10 5.26 7020D10 25 x 1/2” 10 4.23 7020D20 25 x 3/4” 10 4.23 7020D30 25 x 1” 10 6.55 7020E20 32 x 3/4” 5 6.55 7020E30 32 x 1” 5 6.55 7020E40 32 x 1 1/4” 5 6.55 7020E50 32 x 1 1/2” 5 6.55 7020F30 40 x 1” 1 12.54 7020F40 40 x 1 1/4” 1 12.54 7020F50 40 x 1 1/2” 1 12.54 7020F60 40 x 2” 1 12.54 7020G30 50 x 1” 1 16.02 7020G40 50 x 1 1/4” 1 16.02 7020G50 50 x 1 1/2” 1 16.02 7020G60 50 x 2” 1 16.02 7020H40 63 x 1 1/4” 1 21.46 7020H50 63 x 1 1/2” 1 21.46 7020H60 63 x 2” 1 21.46 7020H70 63 x 2 1/2” 1 21.46 87020J60 75 x 2” 1 32.56 87020J70 75 x 2 1/2” 1 32.56 87020J80 75 x 3” 1 32.56 87020K60 90 x 2” 1 44.12 87020K70 90 x 2 1/2” 1 44.12 87020K80 90 x 3” 1 44.12 87020K90 90 x 4” 1 44.12 87020L60 110 x 2” 1 74.74 87020L80 110 x 3” 1 74.74 87020L90 110 x 4” 1 74.74

7030 Female AdaptorMetric x FI BSP

Code d Bag £ ea7030B10 16 x 1/2” 10 3.02 7030B20 16 x 3/4” 10 3.02 7030C10 20 x 1/2” 10 4.23 7030C20 20 x 3/4” 10 4.23 7030C30 20 x 1” 10 4.23 7030D20 25 x 3/4” 10 4.63 7030D30 25 x 1” 10 4.63 7030E20 32 x 3/4” 5 6.23 7030E30 32 x 1” 5 6.23 7030E40 32 x 1 1/4” 5 6.23 7030F30 40 x 1” 1 14.46 7030F40 40 x 1 1/4” 1 14.46 7030F50 40 x 1 1/2” 1 14.46 7030G40 50 x 1 1/4” 1 19.70 7030G50 50 x 1 1/2” 1 19.70 7030G60 50 x 2” 1 19.70 7030H60 63 x 2” 1 24.77 87030J60 75 x 2” 1 33.27 87030J70 75 x 2 1/2” 1 33.27 87030K60 90 x 2” 1 45.53 87030K80 90 x 3” 1 45.53 87030K90 90 x 4” 1 45.53 87030L80 110 x 3” 1 95.61 87030L90 110 x 4” 1 95.61

7060 Female AdaptorParallel Thread

Code d Bag £ ea7060D20 25 x 3/4” 1 6.24 7060D30 25 x 1” 1 6.24 7060E30 32 x 1” 1 8.32

mechanical

Modular Tee extending the standard fitting to providea second branch:7956

Threaded Adaptor converting mechanical fitting to Male Thread:7250

Modular Adaptor connecting fittings together: 7940

Did you know...?

7

mechanical

7040 90° Tee

Code d Bag £ ea7040BBB 16 10 5.28 7040CCC 20 10 6.62 7040DDD 25 5 10.34 7040EEE 32 5 13.93 7040FFF 40 1 27.00 7040GGG 50 1 30.00 7040HHH 63 1 44.90 87040JJJ 75 1 80.65 87040KKK 90 1 113.85 87040LLL 110 1 231.30 17040PP 160 1 422.26

7340 90° Reducing Tee

Code d Bag £ ea7340CBC 20 x 16 x 20 10 8.63 7340DCD 25 x 20 x 25 5 12.57 7340EDE 32 x 25 x 32 5 18.38 7340FDF 40 x 25 x 40 1 28.79 7340FEF 40 x 32 x 40 1 30.22 7340GDG 50 x 25 x 50 1 43.87 7340GEG 50 x 32 x 50 1 43.87 7340GFG 50 x 40 x 50 1 43.87 7340HEH 63 x 32 x 63 1 52.89 7340HFH 63 x 40 x 63 1 52.89 7340HGH 63 x 50 x 63 1 52.89 87340JHJ 75 x 63 x 75 1 90.60

7045 Repair Tee

Code d Bag £ ea7045CCC 20 10 8.39 7045DDD 25 10 11.81 7045EEE 32 5 16.09 7045FFF 40 1 33.02 7045GGG 50 1 36.97 7045HHH 63 1 52.31

7740 90° Enlarging Tee

Code d Bag £ ea7740DED 25 x 32 x 25 5 20.48

7228 EPDM Flange Gasket

Code d Bag £ ea7228550 1 1/2” 1 1.47 7228660 2” 1 2.05 7228770 2 1/2” 1 2.42 7228880 3” 1 2.88 7228MM0 4” 1 3.65 7228NN0 5” 1 3.99 7228PP0 6” 1 5.85 7228QQ0 200 x 8” 1 23.90 7228RR0 225 x 8” 1 23.90 7228SS0 250/280 x 10” 1 24.90 7228TT0 315 x 12” 1 31.24

7220 Compression Flange Adaptor

Code d Bag £ ea7220G50 50 x 1 1/2” 1 40.23 7220G60 50 x 2” 1 40.23 7220H60 63 x 2” 1 62.17 87220J70 75 x 2 1/2” 1 72.54 87220K80 90 x 3” 1 85.39 87220K90 90 x 4” 1 85.39 87220L90 110 x 4” 1 106.75 7220M00 125 x 6” 1 163.69 7220MM0 125 x 5” 1 163.69 17220P0 160 x 6” 1 221.09 17220PM 160 x 5” 1 221.09

7236 Spigot Flange Adaptor

Code d Bag £ ea7236G50 50 x 1 1/2” 1 31.80 7236G60 50 x 2” 1 31.80 7236H60 63 x 2” 1 37.72 7236H70 63 x 2 1/2” 1 37.72 87236J60 75 x 2” 1 44.86 87236J70 75 x 2 1/2” 1 44.86 87236J80 75 x 3” 1 44.86 87236K70 90 x 2 1/2” 1 56.93 87236K80 90 x 3” 1 56.93 87236K90 90 x 4” 1 56.93 87236L80 110 x 3” 1 85.39 87236L90 110 x 4” 1 85.39 87236LL0 110 x 5” 1 96.30 17230P0 160 x 6” 1 158.96 17230PM 160 x 5” 1 158.96

www.plasson.co.uk

mechanical

8

7956 Modular Teewith Male Offtake

Code d Bag £ ea7956E3E 32 x 1” x 32 1 37.75 7956F4F 40 x 1 1/4” x 40 1 50.50 7956F5F 40 x 1 1/2” x 40 1 50.50 7956G4G 50 x 1 1/4” x 50 1 70.78 7956G5G 50 x 1 1/2” x 50 1 70.78 7956G6G 50 x 2” x 50 1 70.78 7956H4H 63 x 1 1/4” x 63 1 98.79 7956H5H 63 x 1 1/2” x 63 1 98.79 7956H6H 63 x 2” x 63 1 98.79

7540 Crosswith Female Offtake

Code d Bag £ ea7540C20 20 x 3/4” 1 10.10

7550 Y-Fitting

Code d Bag £ ea7550BB2 16 x 16 x 3/4” 10 5.28 7550CB2 20 x 16 x 3/4” 10 5.35 7550CC2 20 x 20 x 3/4” 10 6.76 7550DD2 25 x 25 x 3/4” 5 10.10

7840 Teewith Male Offtake

Code d Bag £ ea7840C1C 20 x 1/2” x 20 10 5.72 7840C2C 20 x 3/4” x 20 10 5.72 7840D1D 25 x 1/2” x 25 5 9.29 7840D2D 25 x 3/4” x 25 5 9.29 7840E3E 32 x 1” x 32 5 13.18 7840F4F 40 x 1 1/4” x 40 1 19.48 7840F5F 40 x 1 1/2” x 40 1 19.48 7840G4G 50 x 1 1/4” x 50 1 27.52 7840G5G 50 x 1 1/2” x 50 1 27.52 7840H4H 63 x 1 1/4” x 63 1 37.28 7840H5H 63 x 1 1/2” x 63 1 37.28 7840H6H 63 x 2” x 63 1 37.28

7140 Teewith Female Offtake

Code d Bag £ ea7140B1B 16 x 1/2” x 16 10 4.90 7140B2B 16 x 3/4” x 16 10 4.90 7140C1C 20 x 1/2” x 20 10 6.08 7140C2B 20 x 3/4” x 16 10 6.08 7140C2C 20 x 3/4” x 20 10 6.08 7140D1D 25 x 1/2” x 25 5 10.04 7140D2C 25 x 3/4” x 20 5 10.04 7140D2D 25 x 3/4” x 25 5 10.04 7140D3D 25 x 1” x 25 5 10.04 7140D4D 25 x 1 1/4” x 25 5 10.04 7140E2E 32 x 3/4” x 32 5 13.18 7140E3D 32 x 1” x 25 5 13.18 7140E3E 32 x 1” x 32 5 13.18 7140E4E 32 x 1 1/4” x 32 5 13.18 7140E5E 32 x 1 1/2” x 32 5 13.18 7140F3F 40 x 1” x 40 1 21.37 7140F4F 40 x 1 1/4” x 40 1 23.10 7140F5F 40 x 1 1/2” x 40 1 23.10 7140F6F 40 x 2” x 40 1 23.10 7140G5G 50 x 1 1/2” x 50 1 27.87 7140G6G 50 x 2” x 50 1 27.87 7140H4H 63 x 1 1/4” x 63 1 39.11 7140H5H 63 x 1 1/2” x 63 1 39.11 7140H6H 63 x 2” x 63 1 39.11 87140J6J 75 x 2” x 75 1 73.52 87140J7J 75 x 2 1/2” x 75 1 73.52 87140J8J 75 x 3” x 75 1 73.52 87140K8K 90 x 3” x 90 1 87.76 87140L9L 110 x 4” x 110 1 159.80

Code d Bag £ ea7140F30 40 x 1” x 40 1 21.37 7140G50 50 x 1 1/2” x 50 1 33.99 7140H40 63 x 1 1/4” x 63 1 45.37

7140 90° Slip Teewith Female Offtake

7640 45° Tee

Code d Bag £ ea7640HHH 63 1 52.31 87640JJJ 75 1 93.10 87640KKK 90 1 168.19 87640LLL 110 1 267.28

7810 Coupler with Riser

Code d Bag £ ea7810F2F 40 x 3/4” x 40 1 15.07 7810G2G 50 x 3/4” x 50 1 20.42 7810G3G 50 x 1” x 50 1 20.42 7810H2H 63 x 3/4” x 63 1 33.21 7810H3H 63 x 1” x 63 1 33.21 7810J2J 75 x 3/4” x 75 1 46.50

mechanical 9

mechanical

7850 Elbowwith Male Offtake

Code d Bag £ ea7850C10 20 x 1/2” 10 3.41 7850C20 20 x 3/4” 10 3.41 7850D10 25 x 1/2” 10 3.97 7850D20 25 x 3/4” 10 3.97 7850D30 25 x 1” 10 3.97 7850E30 32 x 1” 5 6.69 7850F30 40 x 1” 1 11.38 7850F40 40 x 1 1/4” 1 11.38 7850F50 40 x 1 1/2” 1 11.38 7850G30 50 x 1” 1 15.64 7850G40 50 x 1 1/4” 1 15.64 7850G50 50 x 1 1/2” 1 15.64 7850H40 63 x 1 1/4” 1 19.21 7850H50 63 x 1 1/2” 1 19.21 7850H60 63 x 2” 1 19.21 87850K80 90 x 3” 1 55.74 87850L90 110 x 4” 1 71.57

7450 45° Elbowwith Male Offtake

Code d Bag £ ea7450C10 20 x 1/2” 10 3.12 7450C20 20 x 3/4” 10 3.12

7150 Elbowwith Female Offtake

Code d Bag £ ea7150B10 16 x 1/2” 10 3.51 7150C10 20 x 1/2” 10 4.64 7150C20 20 x 3/4” 10 4.64 7150D10 25 x 1/2” 10 6.08 7150D20 25 x 3/4” 10 6.08 7150D30 25 x 1” 10 6.08 7150E20 32 x 3/4” 5 9.81 7150E30 32 x 1” 5 9.81 7150E40 32 x 1 1/4” 5 9.81 7150F30 40 x 1” 1 19.76 7150F40 40 x1 1/4” 1 19.76 7150F50 40 x 1 1/2” 1 19.76 7150F60 40 x 2” 1 19.76 7150G30 50 x 1” 1 22.12 7150G40 50 x 1 1/4” 1 22.12 7150G50 50 x 1 1/2” 1 22.12 7150G60 50 x 2” 1 22.12 7150H40 63 x 1 1/4” 1 27.76 7150H50 63 x 1 1/2” 1 27.76 7150H60 63 x 2” 1 27.76 87150J60 75 x 2” 1 52.92 87150J80 75 x 3” 1 52.92

7050 90° Elbow

Code d Bag £ ea7050BB0 16 10 3.40 7050CC0 20 10 4.68 7050DD0 25 10 6.89 7050EE0 32 5 11.31 7050FF0 40 1 22.43 7050GG0 50 1 23.97 7050HH0 63 1 31.80 87050JJ0 75 1 90.60 87050KK0 90 1 115.76 87050LL0 110 1 189.78 17050P0 160 1 300.12

7510 Reducing Elbow

Code d Bag £ ea7510DC0 25 x 20 10 7.94

7460 45° Elbow

Code d Bag £ ea7460EE0 32 5 13.24 7460FF0 40 1 15.06 7460GG0 50 1 18.75 7460HH0 63 1 29.17 87460KK0 90 1 138.09 87460LL0 110 1 212.31

7350 Spigot Elbow

Code d Bag £ ea7350FG0 40 x 50 1 17.76 7350GF0 50 x 40 1 18.45 7350GG0 50 x 50 1 17.76 7350HF0 63 x 40 1 23.73 7350HG0 63 x 50 1 22.80

www.plasson.co.uk

mechanical

10

Code d Bag £ea 7950C00 20 40 0.31 7950D00 25 40 0.32 7950E00 32 40 0.54 7950F00 40 20 0.93 7950G00 50 20 1.04 7950H00 63 10 1.23

7930 Reducing Set

Code d Bag £ea 7930DC0 25 x 20 10 2.72 7930EC0 32 x 20 10 3.97 7930ED0 32 x 25 10 3.97 7930FE0 40 x 32 10 5.54 7930GD0 50 x 25 5 8.08 7930GE0 50 x 32 5 7.86 7930GF0 50 x 40 5 8.42 7930HD0 63 x 25 5 11.76 7930HE0 63 x 32 5 11.76 7930HG0 63 x 50 5 11.76 7930JH0 75 x 63 5 29.35 7930LH0 110 x 63 1 47.67 7930LJ0 110 x 75 1 45.06 7930LK0 110 x 90 1 38.10

7970 Metric PVC Adaptor

Code d Bag £ea 7970C00 20 1 1.70 7970D00 25 1 1.89 7970E00 32 1 2.08 7970F00 40 1 2.67 7970G00 50 1 3.99 7970H00 63 1 4.56

7438 Copper AdaptorTable X & Y

Code d Bag £ ea7438015 20 x 15 10 3.72 7438016 25 x 15 10 4.81 7438021 25 x 21 10 4.55 7438022 25 x 22 10 4.55 7438028 32 x 28 10 6.81 7438035 40 x 35 10 8.39 7438042 50 x 42 10 11.48 7438054 63 x 54 1 12.83

7785 Damaged Metric Pipe Adaptor

Code d Bag £ ea7785C00 20 20 0.71 7785D00 25 20 0.88 7785E00 32 20 1.04 7785H00 63 1 1.36

7129 Plug Adaptor

Code d Bag £ ea7129C00 20 10 1.88 7129D00 25 10 2.04 7129E00 32 10 2.15 7129F00 40 5 2.64 7129G00 50 5 4.27 7129H00 63 5 4.65

7896 Universal Adaptorfor Galvanised & PVC

Code d Bag £ea 7896015 20 x 15 20 2.50 7896022 25 x 22 / 1/2” 20 2.94 7896028 32 x 28 / 3/4” 10 3.25 7896035 40 x 35 / 1” 5 10.82 7896042 50 x 42 / 1 1/4” 5 11.72

anchoring required

7898 Adaptorfor Steel Pipe

Code d Bag £ea 7898G50 50 x 1 1/2” 1 17.36 7898H60 63 x 2” 1 19.13

anchoring required

mechanical 11

mechanical

7950 Pipe Liner

Code Nearest Equivalent Imperial Size(IN x LB/YD)

Fitting Size Nominal Bore (mm)

Nominal Wall Thickness

(mm)

£ ea

7782004 3/8” x 5lb 25 10 5.0 2.087782005 1/2” x 7lb 25 12 5.6 1.727782059 1/2” x 9lb 32 12 6.7 2.487782007 3/4” x 9lb 32 20 5.3 2.097782711 3/4” x 11lb 40 20 6.4 4.087782116 1” x 16lb 50 25 8.0 5.05

7782 Lead Adaptor

7786 Class C Low DensityBS1972/67

Outside Diameter Wall ThicknessCode Nominal

SizeFitting

SizeMinmm

Maxmm

Minmm

Maxmm

£ ea

7786004 3/8” 20 17.0 17.3 2.2 2.5 1.117786005 1/2” 20 21.2 21.5 2.7 3.0 0.697786007 3/4” 25 26.6 26.9 3.4 3.7 0.837786010 1” 32 33.4 33.7 4.2 4.6 0.997786012 1 1/4” 50 42.1 42.5 5.3 5.8 2.307786015 1 1/2” 50 48.1 48.5 6.1 6.7 2.907786020 2” 63 60.1 60.6 7.6 8.4 4.54

7787 Class D Low DensityBS1972/67


SizeFitting

SizeMinmm

Maxmm

Minmm

Maxmm

£ ea

7787005 1/2” 20 21.2 21.5 3.4 3.7 0.697787007 3/4” 25 26.6 26.9 4.3 4.7 0.837787010 1” 32 33.4 33.7 5.4 5.9 0.997787012 1 1/4” 50 42.1 42.5 6.8 7.5 2.307787015 1 1/2” 50 48.1 48.5 7.8 8.6 2.90

7788 Class C High DensityBS3284/67


SizeFitting

SizeMinmm

Maxmm

Minmm

Maxmm

£ ea

7788005 1/2” 20 21.2 21.5 1.8 2.0 0.697788007 3/4” 25 26.6 26.9 2.3 2.6 0.837788010 1” 32 33.4 33.7 2.8 3.1 0.997788012 1 1/4” 50 42.1 42.5 3.6 4.0 2.307788015 1 1/2” 50 48.1 48.5 4.1 4.5 2.907788020 2” 63 60.1 60.6 5.1 5.6 4.54

7789 Class D High DensityBS3284/67


SizeFitting

SizeMinmm

Maxmm

Minmm

Maxmm

£ ea

7789004 3/8” 20 17.0 17.3 1.9 2.1 1.097789005 1/2” 20 21.2 21.5 2.3 2.6 0.697789007 3/4” 25 26.6 26.9 2.9 3.2 0.837789010 1” 32 33.4 33.7 3.7 4.1 0.997789012 1 1/4” 50 42.1 42.5 4.6 5.1 2.307789015 1 1/2” 50 48.1 48.5 5.3 5.8 2.907789020 2” 63 60.1 60.6 6.6 7.3 4.54

Imperial Adaptors to convert Metric Fittings

www.plasson.co.uk

adaptors

12

For dedicated Imperial fittings see page 18

Irish Adaptors to convert Metric Fittings

7995 Normal GaugeIS 134:1977


SizeFitting

SizeMinmm

Maxmm

Minmm

Maxmm

£ ea

7995005 1/2” 20 16.95 17.30 2.30 2.60 0.697995007 3/4” 25 24.95 25.40 3.10 3.50 0.837995010 1” 32 31.25 31.75 3.10 3.50 0.997995012 1 1/4” 50 37.50 38.10 3.10 3.50 2.307995015 1 1/2” 50 43.80 44.45 3.50 3.90 2.907995020 2” 63 60.00 60.85 4.65 5.20 4.54

7996 Heavy GaugeIS 134:1977


SizeFitting

SizeMinmm

Maxmm

Minmm

Maxmm

£ ea

7996005 1/2” 20 20.70 21.10 4.30 4.85 0.697996007 3/4” 25 27.05 27.45 4.30 4.85 0.837996010 1” 32 33.85 34.10 4.30 4.85 0.997996012 1 1/4” 50 42.00 42.65 5.05 5.60 2.307996015 1 1/2” 50 47.95 48.65 5.35 5.90 2.90

Barrier Pipe Adaptors to convertmetric fittingsBarrier pipe must be used when installing PE pipe in contaminated ground. The PlasShield adaptors convert our standard metric fittings to allow connection to various sizes of barrier pipes available in the UK. The adaptor seals the internal bore to ensure the barrier layer in the cut end of the pipe is not exposed to water.

When used in buried applications and to maintain protection, it is necessary to wrap the fitting with aluminium foil tape & petrolatum tape or waterproof tape. This provides continuity of protection to the water in the pipe and minimises any risk of contamination.

6101 Protective Tapesfor use with PlasShield

Code d Bag £ ea6101 (aluminium) 50 x 45m 1 22.18 6102 (waterproof ) 50 x 10m 1 14.42 6103 (petrolatum) 50 x 10m 1 12.98

7400 PlasShield Conversion Kit

Code d Bag £ ea7400000 25 5 1.737400005 26.8 5 2.587400 27.4 5 2.587400001 32 5 2.387400006 33.5 5 3.657400002 34.5 5 3.657400003 63 5 5.517400004 65.8 5 5.51

mechanical 13

adaptors

For dedicated Normal & Heavy gauge fittings see page 19

Pipe Material Above Ground Under GroundBS EN12201-2 Metric PE pipeBS1972 Class C & D (Imperial Low Density)BS3284 Class C & D (Imperial High Density)Copper (Table X)Copper (Table Y)Galvanised IronLeadPVCPoly-York

Universal ConnectionsPlass4 is a universal pipe fitting which connects metric polyethylene to a wide range of pipe types: including imperial polyethylene (alkathene), copper (table X & Y), lead, galvanised steel, PVCu and poly-york.

Plass4 is easy to use with no specialist tools needed to complete the joint.

The Plass4 fitting is made from virgin polypropylene which makes it extremely strong and long-lasting. Plass4 fittings have a design life of 50 years, the same as our standard fittings. Because the Plass4 is so versatile, only a few fitting sizes are needed to cover all pipes from 15mm to 50mm.

The Plass4 fitting comes individually bagged, including a liner for PE pipe and full instructions.

Imperial Pipe Diameter GuideAlkathene low & high density / Copper / Galv / PVC Lead

Pipe O.D: 3/8” 1/2” 3/4” 1” 11/4” 11/2”Alkathene Class C & D

Max (mm) 17.30 21.50 26.90 33.70 42.50 48.50Min (mm) 17.00 21.20 26.60 33.40 42.10 48.10

Copper Max (mm) 15.21 21.56 28.34Min (mm) 15.06 21.41 28.17

Galvanised steel

Max (mm) 21.70 27.20 34.20 42.90 48.80

Min (mm) 21.10 26.60 33.40 42.10 48.00PVC Max (mm) 21.50 26.90 33.70 42.40 48.40

Min (mm) 21.20 26.60 33.40 42.10 48.10

N.B. Weight/ft(mm)

Bore (mm)

Wall (mm)

OD (mm)

3/8” 5lb 10.00 5.00 20.001/2” 6lb 12.00 4.80 21.601/2” 7lb 12.00 5.60 23.201/2” 9lb 12.00 6.70 25.403/4” 9lb 20.00 5.30 30.603/4” 11lb 20.00 6.40 32.803/4” 15lb 20.00 8.50 37.00

1” 16lb 25.00 8.00 41.001” 21lb 25.00 10.00 45.00

Code d Bag £ ea77017251 25 x 15-22 1 13.87 77017252 25 x 20-27 1 14.82 77017253 25 x 27-35 1 19.56 77017323 32 x 27-35 1 22.91 77017500 32 x 20-27 1 19.56 77017504 50 x 35-50 1 42.33

77017 Universal CouplerPlass4

77057 Universal ElbowPlass4

Code d Bag £ ea77057251 25 x 15-22 1 14.25 77057252 25 x 20-27 1 15.47 77057253 25 x 27-35 1 24.89

www.plasson.co.uk

NEW UNIVERSAL PUSHFIT FITTING - see page 24.

universal

14

aaaa

a aaa

aaa

aa aaa

Applications

Code d Bag £ ea74181C0 1/2” x 20 10 4.13 74181CC 3/8” x 20 10 6.12 74181D0 1/2” x 25 10 4.73 74181DC 3/8” x 25 10 8.18 74182D0 3/4” x 25 10 4.69 74183E0 1” x 32 5 10.04 74184E0 1 1/4” x 32 1 20.57 74184G0 1 1/4” x 50 1 26.45 74185G0 1 1/2” x 50 1 26.45 74185H0 1 1/2” x 63 1 33.72 74186H00 2” x 63 1 37.02

7418 CouplerMetric to Imperial

7478 90° ElbowMetric to Imperial

Code d Bag £ ea74781C0 1/2” x 20 10 5.54 74781D0 1/2” x 25 10 9.47 74782D0 3/4” x 25 10 7.98 74783E0 1” x 32 5 13.29

1001M CouplerMetric to Imperial

Code d Bag £ ea1001M6020005 20 x 1/2” 1 5.04 1001M6025005 25 x 1/2” 1 5.30 1001M6025007 25 x 3/4” 1 5.65 1001M6032010 32 x 1” 1 11.52

A dedicated fitting is the preferred solution when connecting old imperial pipes to metric PE. One fitting suits both low density class C & D as well as high density class C & D. Choose from the traditional mechanical hand tight fitting or the innovative Plasson pushfit 1001M coupler.

Code d Bag £ ea1001CU020015 20 x 15 1 7.21 1001CU025015 25 x 15 1 7.50 1001CU025022 25 x 22 1 7.69 1001CU032028 32 x 28 1 14.42

1002C Male AdaptorCopper/ PB/PEX

Code d Bag £ ea1002C7015007 15 x 3/4” 1 6.27 1002C7022007 22 x 3/4” 1 6.60 1002C7028010 28 x 1” 1 10.57

The Plasson pushfit 1001C coupler allows connection of PE pipe to domestic plumbing pipes which may be copper (table X), polybutylene or PEX pipes, with the security of knowing one fitting will cover all three pipe types. Available to connect 15mm, 22mm and 28mm pipes.

Connecting PE pipe to Copper/PB/PEX

Connecting Class C & D, Low & High Density Polyethylene Pipes

1001C CouplerPE to Copper/PB/PEX

TM

mechanical 15

universal

When using PEX/PB pipes, use pipe manufacturers liner.

16076 Saddle Single Outletwith Reinforcing Ring,Stainless Bolts

Code d Bag £ ea16076C10 20 x 1/2” 1 4.10 16076D10 25 x 1/2” 1 4.79 16076D20 25 x 3/4” 1 4.79 16076E10 32 x 1/2” 1 5.28 16076E20 32 x 3/4” 1 5.28 16076E30 32 x 1” 1 5.28 16076F10 40 x 1/2” 1 5.98 16076F20 40 x 3/4” 1 5.98 16076F30 40 x 1” 1 5.98 16076G10 50 x 1/2” 1 6.68 16076G20 50 x 3/4” 1 6.68 16076G30 50 x 1” 1 6.68 16076G40 50 x 1 1/4” 1 6.68 16076H10 63 x 1/2” 1 8.02 16076H20 63 x 3/4” 1 8.02 16076H30 63 x 1” 1 8.02 16076H40 63 x 1 1/4” 1 8.02 16076H50 63 x 1 1/2” 1 8.02 16076J10 75 x 1/2” 1 8.86 16076J20 75 x 3/4” 1 8.86 16076J30 75 x 1” 1 8.86 16076J40 75 x 1 1/4” 1 8.86 16076J50 75 x 1 1/2” 1 8.86 16076J60 75 x 2” 1 8.86 16076K10 90 x 1/2” 1 13.23 16076K20 90 x 3/4” 1 13.23 16076K30 90 x 1” 1 13.23 16076K40 90 x 1 1/4” 1 13.23 16076K50 90 x 1 1/2” 1 13.23 16076K60 90 x 2” 1 13.23 16076L10 110 x 1/2” 1 13.84 16076L20 110 x 3/4” 1 13.84 16076L30 110 x 1” 1 13.84 16076L40 110 x 1 1/4” 1 13.84 16076L50 110 x 1 1/2” 1 13.84 16076L60 110 x 2” 1 13.84 16076M20 125 x 3/4” 1 18.75 16076M30 125 x 1” 1 18.75 16076M40 125 x 1 1/4” 1 18.75 16076M50 125 x 1 1/2” 1 18.75 16076M60 125 x 2” 1 18.75 16076N30 140 x 1” 1 24.65 16076N40 140 x 1 1/4” 1 24.65 16076N50 140 x 1 1/2” 1 24.65 16076N60 140 x 2” 1 24.65 16076P30 160 x 1” 1 34.57 16076P40 160 x 1 1/4” 1 34.57 16076P50 160 x 1 1/2” 1 34.57 16076P60 160 x 2” 1 34.57 16076Q30 180 x 1” 1 49.74 16076Q40 180 x 1 1/4” 1 49.74 16076Q50 180 x 1 1/2” 1 49.74 16076Q60 180 x 2” 1 49.74

Code d Bag £ ea16176C10 20 x 1/2” 1 5.42 16176D10 25 x 1/2” 1 6.01 16176E10 32 x 1/2” 1 7.75 16176E20 32 x 3/4” 1 7.75 16176E30 32 x 1” 1 7.75 16176F20 40 x 3/4” 1 9.02 16176F30 40 x 1” 1 9.02 16176G10 50 x 1/2” 1 10.23 16176G20 50 x 3/4” 1 10.23 16176G30 50 x 1” 1 10.23 16176G40 50 x 1 1/4” 1 10.23 16176H10 63 x 1/2” 1 11.74 16176H20 63 x 3/4” 1 11.74 16176H30 63 x 1” 1 11.74 16176H40 63 x 1 1/4” 1 11.74 16176H50 63 x 1 1/2” 1 11.74 16176J10 75 x 1/2” 1 13.23 16176J20 75 x 3/4” 1 13.23 16176J40 75 x 1 1/4” 1 13.23 16176K10 90 x 1/2” 1 15.97 16176K20 90 x 3/4” 1 15.97 16176K30 90 x 1” 1 15.97 16176K40 90 x 1 1/4” 1 15.97 16176K50 90 x 1 1/2” 1 15.97 16176K60 90 x 2” 1 15.97 16176L30 110 x 1” 1 20.94 16176L40 110 x 1 1/4” 1 20.94 16176L50 110 x 1 1/2” 1 20.94 16176L60 110 x 2” 1 20.94 16176M20 125 x 3/4” 1 27.70 16176M30 125 x 1” 1 27.70 16176M60 125 x 2” 1 27.70 16176N60 140 x 1” 1 37.32 16176P30 160 x 1” 1 52.07 16176P50 160 x 1 1/2” 1 52.07 16176P60 160 x 2” 1 52.07 16176Q30 180 x 1” 1 62.10 16176Q40 180 x 1 1/4” 1 62.10 16176Q50 180 x 1 1/2” 1 62.10 16176Q60 180 x 2” 1 62.10

www.plasson.co.uk

16176 Saddle Double Outletwith Reinforcing Ring,Stainless Bolts

saddles

16

16540 Tapper for PE/PVC Pipe,Stainless Bolts

Code d Bag £ ea165400063025 63-25 1 55.34 165400063032 63-32 1 60.62 165400075025 75-25 1 61.61 165400075032 75-32 1 62.55 165400090025 90-25 1 63.23 165400090032 90-32 1 64.39 165400110025 110-25 1 78.27 165400110032 110-32 1 79.39 165400125025 125-25 1 84.80 165400125032 125-32 1 85.56 165400140025 140-25 1 92.08 165400140032 140-32 1 93.24 165400160025 160-25 1 99.83 165400160032 160-32 1 100.98 165400180025 180-25 1 120.47 165400180032 180-32 1 121.55

mechanical

Mechanical Self-Tapping Swivel TeeA simple but effective fitting for branch connections from a live mains pipe(63mm-180mm), to 25mm or 32mm supply pipes, the Tapper is suitable for use on metric PE and metric PVC mains pipes.

Key Features Can be used on a live, pressurised mains pipe.

Suitable for PE and uPVC/MOPVC.

Outlet can be pointed in required direction before final tightening.

Large footprint on mains pipe protects PVC from splitting and saddle migration.

Stainless steel bolts ensures long service life.

Easy to fit.

Minimal headloss.

Can be used as a temporary shut off.

17

tapping saddle

TM

Imperial Fittings7404 CouplerImperial

Code d Bag £ ea7404110 1/2” x 1/2” 10 4.35 7404220 3/4”x 3/4” 10 4.65 7404330 1” x 1” 5 10.91 7404550 1 1/2” x 1 1/2” 1 24.10 7404660 2” x 2” 1 35.22

7428 Male AdaptorImperial

Code d Bag £ ea7428110 1/2” x 1/2” 10 4.06 7428220 3/4” x 3/4” 10 4.86 7428330 1” x 1” 5 7.53 7428550 1 1/2” x 1 1/2” 1 18.42 7428660 2” x 2” 1 24.68

7444 TeeImperial

Code d Bag £ ea7444111 1/2” 1 7.61 7444222 3/4” 1 11.89

3489 Stop TapImperial

Code d Bag £ ea3489110 1/2” 5 25.63 3489220 3/4” 5 36.32

7388 Female AdaptorImperial

Code d Bag £ ea7388205 1/2” x 1/2” 10 4.86 7388220 3/4” x 3/4” 10 5.32 7388330 1” x 1” 5 7.16 7388550 1 1/2” x 1 1/2” 1 22.66 7388660 2” x 2” 1 28.49

7454 ElbowImperial

Code d Bag £ ea7454110 1/2” x 1/2” 1 5.38 7454220 3/4” x 3/4” 1 7.92

7494 ElbowImperialwith Male Offtake

Code d Bag £ ea7494110 1/2” x 1/2” 1 3.92 7494220 3/4” x 3/4” 1 4.57

7474 ElbowImperialwith Female Offtake

Code d Bag £ ea7474110 1/2” x 1/2” 1 5.34 7474220 3/4” x 3/4” 1 6.99

Specifically sized to give the best seal to Imperial class C & D, low & high density pipes and Normal Gauge and Heavy Gauge IS134 pipes. Requires no additional parts and can be push fitted. No reduction to the bore of the pipe and hand tightened for pipes of 1” and below. For connecting metric to imperial see page 15 for the Black 2 Blue fitting range.

Dedicated Imperial & Irish Fittings

www.plasson.co.uk

imperial

18

Irish Fittings

7518 CouplerNormal x Metric

Code d Bag £ ea7518205 1/2” x 20 10 3.75 7518255 1/2 “x 25 10 5.72 7518257 3/4” x 25 10 4.32 7518321 1” x 32 5 8.02

7618 CouplerHeavy x Metric

Code d Bag £ ea7618205 1/2” x 20 10 3.75 7618255 1/2” x 25 10 5.72 7618257 3/4” x 25 10 4.32 7618321 1” x 32 5 8.02

7578 ElbowNormal x Metric

Code d Bag £ ea7578205 1/2” x 20 10 4.54 7578207 1/2” x 25 10 8.30 7578255 3/4” x 20 10 6.44 7578257 3/4” x 25 10 6.21 7578321 1” x 32 5 9.70

7678 ElbowHeavy x Metric

Code d Bag £ ea7678205 1/2” x 20 10 4.54 7678255 1/2” x 25 10 8.30 7678257 3/4” x 25 10 6.21 7678321 1” x 32 5 10.59

7508 CouplerNormal x Heavy

Code d Bag £ ea7508205 1/2” x 1/2” 10 4.45 7508210 1/2” x 3/4” 10 9.05 7508257 3/4” x 3/4” 10 5.02

77017 Plass4 Universal CouplerTo Heavy Gauge

Code d Bag £ ea070176005022 1/2” HG x 15-22mm 1 12.20 070176005027 1/2” HG x 20-27mm 1 15.35 070176005035 1/2” HG x 27-35mm 1 19.21

Connecting Irish Standard to metric / universal

mechanical

7438 Copper Adaptortable X & Y

Code d Bag £ ea7438017 25 x 1/2” IRS 10 4.81 7438021 25 x 3/4” IRS 10 4.55 7438028 32 x 1” IRS 10 6.81

For connection to Irish size copper, use the 7438 copper adaptor in a metric Plasson mechanical fitting.

Irish Copper Adaptor

Irish Copper Pipe sizesNominal Tube Size mm Minimum Outside

Diameter mm1/2” 14.73/4” 21.0

1” 27.4

19

irish to metric &

universal

7501 CouplerNormal Gauge

Code d Bag £ ea7501205 1/2” 10 4.45 7501210 3/4” x 1/2” 10 8.45 7501257 3/4” 10 5.02 7501321 1” 10 9.85

7528 Male Adaptor Normal Gauge

Code d Bag £ ea7528205 1/2” x 1/2” MI 10 3.45 7528255 3/4” x 1/2” MI 10 3.91 7528257 3/4” x 3/4” MI 10 3.91 7528321 1” x 1 “ MI 5 5.80

7538 Female AdaptorNormal Gauge

Code d Bag £ ea7538205 1/2” x 1/2” 10 4.45 7538257 3/4” x 3/4” 10 4.27 7538321 1” x 1” 5 5.80

7505 ElbowNormal Gauge

Code d Bag £ ea7505205 1/2” x 1/2” 10 5.39 7505257 3/4” x 3/4” 10 7.06 7505321 1” x 1 “ 5 11.33

7506 Wall Plate ElbowNormal Gauge

Code d Bag £ ea7506205 1/2” x 1/2” 10 8.55 7506257 3/4“ x 3/4” 10 12.00

7509 Stop TapNormal Gauge

Code d Bag £ ea7509205 1/2” x 1/2” 10 21.17 7509257 3/4 “x 3/4” 10 25.27

7579 Female ElbowNormal Gauge

Code d Bag £ ea7579110 1/2” x 1/2” 10 4.59 7579220 3/4“ x 3/4” 10 4.87 7579330 1” x 1“ 5 6.98

Pipe O.D: 1/2” 3/4” 1” 11/4” 11/2”

Normal GaugeMax 17.30 25.40 31.75 38.10 44.45Min 16.94 24.94 31.24 37.52 43.82

Heavy GaugeMax 21.10 27.45 34.25 42.65 48.65Min 20.70 27.05 33.85 42.00 47.95

Pipe Diameter Guide for Normal & Heavy Gauge IS134

Code d Bag £ ea7504205 1/2” x 1/2” x 1/2” 10 7.13 7504212 3/4” x 1/2” x 3/4” 10 10.07 7504257 3/4” x 3/4” x 3/4” 10 10.04 7504321 1” x 1” x 1” 5 17.65 7504323 1” x 3/4” x 1” 5 15.84

7504 TeeNormal Gauge

www.plasson.co.uk

irish normal gauge

20

7601 CouplerHeavy x Heavy

Code d Bag £ ea7601205 1/2” 10 4.45 7601210 3/4” x 1/2” 10 8.45 7601257 3/4” 10 5.02 7601321 1” 10 9.85

7605 ElbowHeavy Gauge

Code d Bag £ ea7605205 1/2” x 1/2” 10 5.50 7605257 3/4” x 3/4” 10 7.29 7605321 1” x 1” 5 11.04

7604 TeeHeavy Gauge

Code d Bag £ ea7604205 1/2” x 1/2” x 1/2” 10 7.06 7604212 3/4” x 1/2” x 3/4” 10 10.07 7604257 3/4” x 3/4” x 3/4” 10 10.04 7604321 1” x 1” x 1” 5 14.86 7604323 1” x 3/4” x 1” 5 14.86

7638 Female AdaptorHeavy Gauge

Code d Bag £ ea7638205 1/2” x 1/2” FI 10 3.91 7638210 1/2” x 3/4” FI 10 3.90 7638257 3/4” x 3/4” FI 10 4.27 7638321 1” x 1” FI 5 5.88

7628 Male AdaptorHeavy Gauge

Code d Bag £ ea7628205 1/2” x 1/2” MI 10 3.50 7628207 1/2“x 3/4” MI 10 4.56 7628210 3/4” x 1” MI 10 6.10 7628251 1” x 3/4” MI 10 6.10 7628254 3/4” x 1/2” MI 10 4.56 7628257 3/4” x 3/4” MI 10 3.91 7628321 1” x 1” MI 5 6.10

0703G Female Adaptorwith Parallel ThreadHeavy Gauge

Code d Bag £ ea0703G6005007 1/2” x 3/4” FI 5 6.99

7679 Female ElbowHeavy Gauge

Code d Bag £ ea7679110 1/2” x 1/2” 10 4.61 7679220 3/4” x 3/4” 10 4.87 7679330 1” x 1” 5 6.98

7606 Wall Plate ElbowHeavy Gauge

Code d Bag £ ea7606205 1/2” x 1/2” 10 8.36

7607 Teewith Female OfftakeHeavy Gauge

Code d Bag £ ea7607205 1/2” x 1/2” x 1/2” 10 6.58 7607257 3/4” x 3/4”x 3/4” 10 10.14 7607321 1” x 1” x 1” 5 13.38

7609 Stop TapHeavy Gauge

Code d Bag £ ea7609205 1/2” x 1/2” 10 21.17 7609257 3/4” x 3/4” 10 25.27

mechanical 21

irish heavy gauge

www.plasson.co.uk

notespushfit

22

pushfitPlasson pushfit: A range of innovative fittings created byPlasson, market leader in design and manufacture of reliablefittings for polyethylene pipe systems.

Plasson pushfit: Fittings provide dedicated solutions for connecting PE pipe to various other pipe materials, such as copper, polybutylene and PEX.

Plasson pushfit: WRAS approved and designed to withstand 16 bar pressure rating. Inserting the pipe up to the fitting stop creates both the seal and the grip on the pipe. Plasson pushfit: Compact and attractive design makes this fitting ideal forthe plumbing market, where space is limited and appearance is crucial. Simplicity of assembly makes both the professional and occasional user’s job easier whilst retaining Plasson reliability.

Notes

23

pushfit

1001 Coupler

Code d Bag £ ea 1001U0020 20 5 4.141001U0025 25 5 4.451001U0032 32 5 10.441001U0040 40 1 22.661001U0050 50 1 24.791001U0063 63 1 37.19

1011 Reducing Coupler

Code d Bag £ ea 1011U0025020 25 x 20 5 8.331011U0032020 32 x 20 5 14.101011U0032025 32 x 25 5 14.121011U0040032 40 x 32 1 23.551011U0050025 50 x 25 1 26.411011U0050032 50 x 32 1 30.201011U0063032 63 x 32 1 38.681011U0063050 63 x 50 1 38.00

1001C CouplerPE x Copper(table X)/PB/PEX

Code d Bag £ ea 1001CU020015 20 x 15 5 7.211001CU025015 25 x 15 5 7.501001CU025022 25 x 22 5 7.691001CU032028 32 x 28 5 14.42

1001M CouplerMetric to Imperial

Code d Bag £ ea 1001M6020005 20 x 1/2” 5 5.041001M6025005 25 x 1/2” 5 5.301001M6025007 25 x 3/4” 5 5.651001M6032010 32 x 1” 5 11.52

www.plasson.co.uk

10017 Universal CouplerPE x Universal

Code d Bag £ ea 100170025018 25 x 14-18 5 13.85100170025022 25 x 19-22 5 13.85100170025028 25 x 24-28 5 13.85100170025035 25 x 31-35 5 TBC100170032028 32 x 24-28 5 TBC100170032035 32 x 31-35 5 TBC

UniversalThis is a new and exciting fitting forconnections from metric PE to other pipematerials such as imperial polyethylene,copper, lead, PVC, poly-york and galvanised iron pipes.

It revolutionises the extending or repair of oldpipes with a neat attractive fitting. Pushfit to the metric end, simply tighten the universal end to provide a reliable long term fix with an appearance that will satisfy the most demanding customer.

It will also be available later in 2014 as arepair coupling Universal to Universal.

10017 Universal CouplerUniversal x Universal

Code d Bag £ ea100170014018 14-18 x 14-18 5 TBC100170019022 19-22 x 19-22 5 TBC100170024028 24-28 x 24-28 5 TBC

pushfit

24

1002 Male Adaptor

Code d Bag £ ea 1002U0020005 20 x 1/2” 5 3.861002U0020007 20 x 3/4” 5 4.141002U0025005 25 x 1/2” 5 4.651002U0025007 25 x 3/4” 5 4.651002U0025010 25 x 1” 5 7.211002U0032007 32 x 3/4” 5 7.201002U0032010 32 x 1” 5 7.201002U0032013 32 x 1 1/4” 5 7.201002U0040010 40 x 1” 1 14.221002U0040013 40 x 1 1/4” 1 14.221002U0040015 40 x 1 1/2” 1 14.221002U0050015 50 x 1 1/2” 1 17.811002U0050020 50 x 2” 1 17.811002U0063015 63 x 1 1/2” 1 24.281002U0063020 63 x 2” 1 24.28

1002C Male Adaptorto Copper(table X)/PB/PEX

Code d Bag £ ea 1002C7015007 15 x 3/4” 5 6.271002C7022007 22 x 3/4” 5 6.601002C7028010 28 x 1” 5 10.57

1004 Tee


1014 TeeFemale Threaded

Code d Bag £ ea 1014U0020005 20 x 1/2” x 20 5 6.381014U0025007 25 x 3/4” x 25 5 9.591014U0032010 32 x 1” x 32 5 13.34

1003 Female Adaptor

Code d Bag £ ea 1003U0020005 20 x 1/2” 5 4.491003U0025005 25 x 1/2” 5 5.131003U0025007 25 x 3/4” 5 4.921003U0025010 25 x 1” 5 6.451003U0032007 32 x 3/4” 5 6.451003U0032010 32 x 1” 5 6.451003U0032013 32 x 1 1/4” 5 6.451003U0040013 40 x 1 1/4” 1 15.681003U0050015 50 x 1 1/2” 1 21.221003U0050020 50 x 2” 1 21.221003U0063015 63 x 1 1/2” 1 31.551003U0063020 63 x 2” 1 31.55

1003C Female Adaptorto Copper(table X) /PB/PEX

Code d Bag £ ea 1003C701507 15 x 3/4” 5 8.351003C702207 22 x 3/4” 5 8.66

1034 Reducing Tee

Code d Bag £ ea 1034U0025020 25 x 20 x 25 5 12.941034U0032020 32 x 20 x 32 5 17.401034U0032025 32 x 25 x 32 5 17.38

1012 End Plug

Code d Bag £ ea 1012U0020 20 5 5.111012U0025 25 5 6.561012U0032 32 5 9.56101200040 40 1 16.46101200050 50 1 20.76101200063 63 1 30.69

25

pushfit

0341 Stop TapAbove & Below Ground

Code d Bag £ ea 0341U0020 20 5 24.510341U0025 25 5 34.730341U0032 32 5 53.83

0341C Stop TapPE x Copper(table X)/PB/PEX

Code d Bag £ ea 03410020015 20 x 15 5 31.0803410025015 25 x 15 5 42.0303410025022 25 x 22 5 43.8403410032028 32 x 28 5 61.86

1051 Reducing Elbow

Code d Bag £ ea 1051U0025020 25 x 20 5 8.57

1005M ElbowMetric to Imperial

Code d Bag £ ea 1005M6025005 25 x 1/2” 5 9.261005M6025007 25 x 3/4” 5 9.02

1015 Female Elbow

Code d Bag £ ea 1015U0020005 20 x 1/2” 5 4.961015U0020007 20 x 3/4” 5 4.961015U0025005 25 x 1/2” 5 6.591015U0025007 25 x 3/4” 5 6.591015U0025010 25 x 1” 5 6.591015U0032007 32 x 3/4” 5 10.691015U0032010 32 x 1” 5 10.69

1075 Wall Plate Elbow

Code d Bag £ ea 1075U0020005 20 x 1/2” 1 10.121075U0020007 20 x 3/4” 1 10.121075U0025005 25 x 1/2” 1 13.491075U0025007 25 x 3/4” 1 13.49

1005 Elbow


1085 Male Elbow

Code d Bag £ ea 1085U0020005 20 x 1/2” 5 3.751085U0020007 20 x 3/4” 5 3.751085U0025005 25 x 1/2” 5 4.361085U0025007 25 x 3/4” 5 4.361085U0025010 25 x 1” 5 4.361085U0032007 32 x 3/4” 5 7.351085U0032010 32 x 1” 5 7.351085U0032013 32 x 1 1/4” 5 7.351085U0040013 40 x 1 1/4” 1 14.181085U0050015 50 x 1 1/2” 1 20.031085U0063020 63 x 2” 1 24.41

www.plasson.co.uk

7950 Pipe Liner

Code d Bag £ ea 7950C00 20 40 0.31 7950D00 25 40 0.32 7950E00 32 40 0.54 7950F00 40 20 0.93 7950G00 50 20 1.04 7950H00 63 10 1.23

pushfit

26

•Aestheticallydesignedproduct-givesaprofessionalfinishtothejob.

•Toolsnotrequired-simplepushfitassembly.

•Compactsize-canbeinstalledinconfinedspaces.

• Instantsealandintegrityofjoint-captivesealandnonutstotighten.

• Fullendloadperformance-noneedforanchoring.

•TransitionfromPEtointernalplumbingsystems-Copper,PBandPEX, accommodated in one fitting.

•50yeardesignlife-providestotalreliability.

• Tamperresistantdesign-ensuressystemintegrity.

Plasson pushfit features and benefits

27

pushfit

notes

www.plasson.co.uk

electrofusion

28

ELECTROFUSIONPlasson electrofusion fittings are designed for high performance pipe jointing and a long system life. The combination of quality, durability and ease of use has been shown to be most economical for both installer and network owner.

Features• Standard 4.7mm pin size fits UK controllers.• Plasson fittings will weld to PE80, PE100 and PEX-A pipes.• Fittings available to weld to thin walled pipes up to SDR41.• Long fusion zones provide high strength joints.• Large cold zones ensure quality welds .• Suitable for use with Plasson SmartFuse, Fusamatic and non-Fusamactic controllers.• Barcode and Plasson SmartFuse automation reduces potential for errors in set up.• Profiled fitting body to spread stresses and extend long service life.• Range includes unique products to simplify the task.• Single weld time for ambient temperature range from -10 to +45 degrees centigrade, no

time adjustment required.• PE coated welding wire ensures consistency of material in the joint to strengthen the weld.• Welding wire is precision laid in the fitting to provide even heat distribution.• Larger fittings have protected pins to minimise the possibility of damage during handling.• Saddle fittings have an under part - no top loading tool is required to fit them.• Tees and elbows to 250mm are available, reducing time and installation costs. • WRAS approved material.• Fittings BS EN 12201 and BS EN 1555 approved.

electrofusion

29

electrofusion

www.plasson.co.uk

Code d Bag £ ea49010450 450 1 1,265.0049010500 500 1 2,100.0049010560 560 1 3,370.0049010630 630 1 4,494.0049010710 710 1 5,895.0049010800 800 1 6,995.00

49010 EF CouplerPN16Large Diameter

Code d Bag £ ea36010450 450 1 884.7636010500 500 1 1,380.2336010560 560 1 2,123.4236010630 630 1 3,291.8636010710 710 1 4,494.0036010800 800 1 5,495.00

36010 EF Light Fit CouplerPN10Large Diameter

Code d Bag £ ea36010040 40 1 10.1436010050 50 1 10.4436010063 63 1 11.6836010075 75 1 17.7036010090 90 1 19.1136010110 110 1 24.4936010125 125 1 30.5836010140 140 1 32.9236010160 160 1 35.9536010180 180 1 50.4036010200 200 1 65.1236010225 225 1 83.5236010250 250 1 116.0836010280 280 1 168.7536010315 315 1 191.9636010355 355 1 271.7936010400 400 1 374.79

36010 EF Light Fit CouplerPN10

Code d Bag £ ea450100050 50 1 12.80450100063 63 1 13.80450100075 75 1 22.16450100090 90 1 24.40450100110 110 1 34.27450100125 125 1 39.26450100160 160 1 61.40450100180 180 1 72.44450100200 200 1 102.80450100225 225 1 116.56450100250 250 1 167.95450100280 280 1 254.12450100315 315 1 281.64

45010 EF CouplerPN25

Code d Bag £ ea49010020 20 1 6.7749010025 25 1 6.7749010032 32 1 6.7749010040 40 1 10.1449010050 50 1 10.4449010063 63 1 12.5549010075 75 1 19.2749010090 90 1 19.4449010110 110 1 29.8049010125 125 1 34.1449010140 140 1 43.7949010160 160 1 53.3949010180 180 1 62.9949010200 200 1 89.3949010225 225 1 101.3649010250 250 1 146.0449010280 280 1 220.9749010315 315 1 244.9049010355 355 1 447.7149010400 400 1 489.56

49010 EF CouplerPN16

electrofusion

30

Code d Bag £ ea49117101 50 x 32 1 11.04 49117102 63 x 32 1 15.09 49117090 63 x 40 1 15.08 49117103 63 x 50 1 15.09 49117099 75 x 63 1 23.26 49117100 90 x 50 1 31.76 49117104 90 x 63 1 31.76 49117098 90 x 75 1 31.76 49117105 110 x 63 1 42.38 491171041 110 x 75 1 42.38 49117106 110 x 90 1 42.38 49117107 125 x 63 1 51.21 49117108 125 x 90 1 51.21 49117125 125 x 110 1 51.21 49117190 140 x 90 1 73.73 49117109 140 x 110 1 73.73 49117191 140 x 125 1 73.73 49117110 160 x 90 1 98.42 491171101 160 x 110 1 98.65 49117114 160 x 125 1 98.65 49117111 160 x 140 1 98.42 49117112 180 x 90 1 121.12 49117113 180 x 125 1 121.12 49117195 180 x 140 1 121.12 49117180 180 x 160 1 121.12 49117199 200 x 160 1 139.43 49117200 200 x 180 1 139.43 49117225 225 x 200 1 214.80 49117250 250 x 180 1 272.20 49117251 250 x 200 1 272.20

49117 EF Spigot Reducer

49120 EF End Cap

Code d Bag £ ea49120020 20 1 12.03 49120025 25 1 12.89 49120032 32 1 14.10 49120040 40 1 16.40 49120050 50 1 23.98 49120063 63 1 27.13 49120075 75 1 49.55 49120090 90 1 55.8649120110 110 1 80.25 49120125 125 1 90.09 49120140 140 1 102.99 49120160 160 1 135.75 49120180 180 1 177.3049120200 200 1 215.59 49120225 225 1 227.07 49120250 250 1 272.80

49127 EF Spigot End Plug

Code d Bag £ ea49127020 20 1 3.22 49127025 25 1 3.46 49127032 32 1 3.78 49127050 50 1 5.34 49127063 63 1 10.03 49127075 75 1 11.2549127090 90 1 18.76 49127110 110 1 25.67 49127125 125 1 31.29 49127140 140 1 36.67 49127160 160 1 50.05 49127180 180 1 59.4549127200 200 1 154.5449127225 225 1 169.9449127250 250 1 218.00 49127280 280 1 276.17 49127315 315 1 378.55

electrofusion

Code d Bag £ ea49011032 32 1 9.9249011040 40 1 11.9749011050 50 1 15.0649011063 63 1 17.79

49011 EF Long Coupler

49110 EF Reducing Coupler

Code d Bag £ ea49110014 25 x 20 1 6.80 49110018 32 x 20 1 6.80 49110019 32 x 25 1 7.95 49110024 40 x 25 1 13.95 49110026 40 x 32 1 13.95 49110030 50 x 25 1 20.11 49110031 50 x 32 1 20.11 49110033 50 x 40 1 20.1149110046 63 x 32 1 20.07 49110047 63 x 40 1 20.07 49110048 63 x 50 1 20.07 49110060 75 x 63 1 22.85 49110068 90 x 50 1 25.81 49110070 90 x 63 1 25.81 49110071 90 x 75 1 25.81 49110081 110 x 63 1 36.30 49110083 110 x 90 1 36.30 49110095 125 x 90 1 51.83 49110096 125 x 110 1 56.63 49110121 160 x 90 1 87.30 49110122 160 x 110 1 87.30 49110123 160 x 125 1 87.30 49110138 180 x 125 1 95.61

31

electrofusion

49040 EF 90° Tee

Code d Bag £ ea49040020 20 1 14.87 49040025 25 1 14.71 49040032 32 1 15.82 49040040 40 1 24.52 49040050 50 1 29.90 49040063 63 1 33.61 49040075 75 1 50.57 49040090 90 1 57.98 49040110 110 1 86.71 49040125 125 1 111.51 49040160 160 1 184.09 49040180 180 1 206.17 49040200 200 1 382.96 49040225 225 1 435.17 49040250 250 1 576.10

49140 EF Reducing Tee

Code d Bag £ ea49140014 25 x 20 x 25 1 19.04 49140015 25 x 32 x 25 1 19.04 49140018 32 x 20 x 32 1 19.04 49140019 32 x 25 x 32 1 19.05 49140023 40 x 20 x 40 1 23.01 49140024 40 x 25 x 40 1 23.01 49140025 40 x 32 x 40 1 23.01 49140029 50 x 20 x 50 1 30.41 49140030 50 x 25 X 50 1 30.41 49140031 50 x 32 x 50 1 30.4149140044 63 x 20 x 63 1 43.48 49140046 63 x 32 x 63 1 43.48 49140047 63 x 40 x 63 1 43.38 49140048 63 x 50 x 63 1 43.38 49140075 75 x 63 x 75 1 63.70 49140070 90 x 63 x 90 1 81.35 49140081 110 x 63 x 110 1 178.18 49140083 110 x 90 x 110 1 137.46 49140095 125 x 90 x 125 1 156.37 49140096 125 x 110 x 125 1 168.11 49140121 160 x 90 x 160 1 246.55 49140122 160 x 110 x 160 1 246.55 49140123 160 x 125 x 160 1 246.55 49140136 180 x 90 x 180 1 338.56 49140137 180 x 110 x 180 1 338.56 49140138 180 x 125 x 180 1 338.56 49140139 180 x 140 x 180 1 338.56 49140141 180 x 160 x 180 1 338.56 49140142 200 x 90 x 200 1 430.58 49140144 200 x 110 x 200 1 430.58 49140146 225 x 90 x 225 1 486.02 49140147 225 x 110 x 225 1 486.02 49140151 250 x 90 x 250 1 642.93 49140152 250 x 110 x 250 1 642.93

49940 EF Flanged Tee

Code d Bag £ ea49940072 90 x 80 x 90 1 151.24 49940083 110 x 80 x 110 1 179.93 49940110 110 x 100 x 110 1 205.12 49940095 125 x 80 x 125 1 188.25 49940096 125 x 100 x 125 1 196.20 49940121 160 x 80 x 160 1 299.66 49940122 160 x 100 x 160 1 316.60 49940136 180 x 80 x 180 1 383.71 49940137 180 x 100 x 180 1 393.15

49240 EF Double Reducing Tee

Code d Bag £ ea49240425 40 x 25 1 42.64 49240432 40 x 32 1 42.64 49240525 50 x 25 1 50.5049240532 50 x 32 1 50.50 49240540 50 x 40 1 50.5049240625 63 x 25 1 60.51 49240632 63 x 32 1 60.51 49240640 63 x 40 1 60.51

49090 EF 180° Elbow

Code d Bag £ ea490900025 25 1 38.20 490900032 32 1 46.06 490900040 40 1 57.30

49190 EF Y Reducer

Code d Bag £ ea49190019 32 - 25 x 25 1 68.22 49190026 40 - 32 x 32 1 77.54 49190033 50 - 40 x 40 1 87.17

www.plasson.co.uk

electrofusion

32

49050 EF 90° Elbow

Code d Bag £ ea49050020 20 1 15.82 49050025 25 1 15.82 49050032 32 1 15.82 49050040 40 1 22.60 49050050 50 1 31.03 49050063 63 1 33.06 49050075 75 1 44.82 49050090 90 1 47.19 49050110 110 1 71.96 49050125 125 1 81.40 49050140 140 1 105.10 49050160 160 1 151.00 49050180 180 1 185.21 49050200 200 1 318.16 49050225 225 1 380.02 49050250 250 1 472.38

49150 EF 90 ° Duck FootElbow

Code d Bag £ ea49150090 90 1 117.99

49060 EF 45° Elbow

Code d Bag £ ea49060032 32 1 15.08 49060040 40 1 21.41 49060050 50 1 24.74 49060063 63 1 33.01 49060075 75 1 44.73 49060090 90 1 49.37 49060110 110 1 72.99 49060125 125 1 81.89 49060140 140 1 105.10 49060160 160 1 150.88 49060180 180 1 186.00 49060200 200 1 318.16 49060225 225 1 380.02 49060250 250 1 472.38

49020 EF 22.5° Elbow

Code d Bag £ ea49020090 90 1 42.47 49020110 110 1 53.94 49020125 125 1 78.92 49020160 160 1 139.44 49020180 180 1 185.21

49470 EF Adjustable Elbow

Code d Bag £ ea49470110 110 1 164.07 49470125 125 1 203.1449470160 160 1 291.90 49470180 180 1 372.88

49471 EF Adjustable ElbowOne Sided

Code d Bag £ ea49471110 110 1 135.19 49471125 125 1 164.64 49471160 160 1 243.77 49471180 180 1 300.68

electrofusion

EF Adjustable ElbowsThese revolutionary fittings simplify the process of pipe section alignment. Each adjustable elbow joint allows 12° deflection in any direction, thus the 49470 provides up to 24° deflection before welding. Once welded, the angle becomes fixed. If up to 36° deflection is required, simply use a 49470 with a 49471 in one side.

33

electrofusion

0990 EF PP Coated FlangeBacking RingPlastic Coated

Code d Bag £ ea09903050 50 x 1 1/2” 1 30.11 09903063 63 x 2” 1 37.18 09903075 75 x 2 1/2” 1 44.31 09903090 90 x 3” 1 50.81 09903110 110 x 4” 1 69.64 09903125 125 x 4” 1 69.64 09903140 140 x 5” 1 86.8009903160 160 x 6” 1 107.5009903180 180 x 6” 1 107.50 09903315 315 x 12” 1 192.63

49027 EF Spigot Flange Adaptor

Code d Bag £ ea49027032 32 1 8.44 49027050 50 1 13.00 49027063 63 1 15.09 49027075 75 1 19.15 49027090 90 1 25.11 49027110 110 1 31.35 49027125 125 1 38.70 49027140 140 1 49.62 49027160 160 1 55.48 49027180 180 1 87.33 49027200 200 1 99.74 49027225 225 1 107.28 49027250 250 1 164.84 49027251 280 1 217.74 49027315 315 1 276.50

49630 EF Tapping Saddle

Code d Bag £ ea49630023 40 x 20 1 53.0949630026 40 x 32 1 53.09 49630029 50 x 20 1 53.09 49630031 50 x 32 1 53.09 49630044 63 x 20 1 53.09 49630045 63 x 25 1 53.0949630046 63 x 32 1 53.09 49630047 63 x 40 1 84.40 49630048 63 x 50 1 84.40 49630051 63 x 63 1 84.40 49630053 75 x 20 1 74.68 49630056 75 x 32 1 53.09 49630057 75 x 40 1 74.68 49630058 75 x 50 1 74.68 49630060 75 x 63 1 84.40 49630064 90 x 20 1 53.09 49630065 90 x 25 1 53.09 49630066 90 x 32 1 53.09 49630067 90 x 40 1 53.09 49630068 90 x 50 1 84.40 49630070 90 x 63 1 84.40 49630074 110 x 20 1 53.09 49630077 110 x 32 1 53.09 49630078 110 x 40 1 53.09 49630079 110 x 50 1 84.40 49630081 110 x 63 1 84.40 49630086 125 x 20 1 53.09 49630088 125 x 32 1 53.09 49630089 125 x 40 1 53.09 49630091 125 x 50 1 84.40 49630093 125 x 63 1 84.40 49630099 140 x 20 1 94.42 49630101 140 x 32 1 94.42 49630102 140 x 40 1 94.42 49630103 140 x 50 1 94.42 49630105 140 x 63 1 94.42 49630113 160 x 20 1 63.54 49630115 160 x 32 1 53.09 49630116 160 x 40 1 62.59 49630117 160 x 50 1 84.40 49630119 160 x 63 1 84.40 49630128 180 x 20 1 84.4049630130 180 x 32 1 73.11 49630131 180 x 40 1 84.40 49630132 180 x 50 1 84.40 49630134 180 x 63 1 84.40 49630144 200 x 20 1 167.75 49630146 200 x 32 1 133.13 49630147 200 x 40 1 167.75 49630148 200 x 50 1 167.75 49630150 200 x 63 1 133.13 49630161 225 x 20 1 133.13 49630163 225 x 32 1 133.13 49630164 225 x 40 1 167.75 49630165 225 x 50 1 167.75 49630167 225 x 63 1 133.1349630178 250 x 20 1 167.7549630181 250 x 32 1 133.13 49630182 250 x 40 1 167.75 49630183 250 x 50 1 167.75 49630185 250 x 63 1 167.75

For Assembly Tool see page 54.

www.plasson.co.uk

49029 EF FlangeBacking RingPlated

Code d Bag £ ea49029006 32 x 1” 1 17.07 49029007 50 x 1 1/2” 1 19.09 49029008 63 x 2” 1 19.61 49029009 75 x 2 1/2” 1 25.84 49029010 90 x 3” 1 29.14 49029020 110/125 x 4” 1 30.70 49029021 140 x 5” 1 50.61 49029040 160 x 6” 1 52.37 49029045 180 x 6” 1 52.37 49029050 200/225 x 8” 1 85.05 49029250 250 x 10” 1 147.91 49029280 280 x 10” 1 147.91 49029315 315 x 12” 1 240.60

For gaskets see page 8.

electrofusion

34

Code d Bag £ ea49380564 63 x 1 1/4” 1 64.73 49380574 75 x 1 1/4” 1 94.77 49380594 90 x 1 1/4” 1 94.77 49380595 90 x 1 1/2” 1 85.69 49380596 90 x 2” 1 103.07 49380615 110 x 1 1/2” 1 90.71 49380616 110 x 2” 1 113.87 49380625 125 x 1 1/2” 1 118.99 49380626 125 x 2” 1 121.62 49380645 140 x 1 1/2” 1 123.93 49380646 140 x 2” 1 138.44 49380665 160 x 1 1/2” 1 138.44 49380666 160 x 2” 1 135.68 49380685 180 x 1 1/2” 1 136.75 49380686 180 x 2” 1 117.88 49380706 200 x 2” 1 149.37 49380726 225 x 2” 1 166.57 49380756 250 x 2” 1 153.97

49580 EF Branch Saddle

Code d Bag £ ea49580192 250-400 x 90 1 359.1049580193 250-400 x 110 1 446.2549580194 250-400 x 125 1 540.7549580195 250-400 x 160 1 1,039.5049580196 450-800 x 90 1 390.6049580197 450-800 x 110 1 491.4049580198 450-800 x 125 1 598.5049580199 450-800 x 160 1 1,207.50

Code d Bag £ ea49580046 63 x 32 1 58.6149580048 63 x 50 1 58.6149580051 63 x 63 1 58.6149580056 75 x 32 1 58.6149580058 75 x 50 1 58.6149580060 75 x 63 1 58.6149580066 90 x 32 1 58.6149580068 90 x 50 1 58.6149580070 90 x 63 1 58.6149580072 90 x 90 1 85.3249580077 110 x 32 1 58.6149580079 110 x 50 1 58.6149580081 110 x 63 1 59.5849580083 110 x 90 1 85.3249580088 125 x 32 1 58.6149580091 125 x 50 1 58.6149580093 125 x 63 1 58.6149580095 125 x 90 1 85.3249580101 140 x 32 1 81.6149580103 140 x 50 1 81.6149580105 140 x 63 1 81.6149580107 140 x 90 1 106.1049580115 160 x 32 1 90.9549580117 160 x 50 1 90.9549580119 160 x 63 1 72.0249580121 160 x 90 1 179.7549580130 180 x 32 1 80.4449580132 180 x 50 1 81.2949580134 180 x 63 1 80.4449580136 180 x 90 1 179.7549580150 200 x 63 1 87.5249580152 200 x 90 1 200.3849580167 225 x 63 1 87.5249580169 225 x 90 1 200.3849580185 250 x 63 1 89.6649580187 250 x 90 1 200.3849580188 280 x 90 1 206.2549580190 315 x 90 1 267.55

49590 EF Flanged Branch Saddlemulti-size250 - 400mm450 - 800mm

Code d Bag £ ea495900400080T 250-400 x 80/3” 1 550.00495900400100T 250-400 x 100/4” 1 658.00495900400150T 250-400 x 150/6” 1 1,299.00495900710080T 450-800 x 80/3” 1 580.00495900710100T 450-800 x 100/4” 1 695.00495900710150T 450-800 x 150/6” 1 1,475.00

electrofusion

49009 EF Flex Restraint160 - 1600mm (4mm pin only)

Code d Bag £ ea49009990 160-1600 1 160.55

For installation use Plasson Flex Restraint belt. See page 57.

The restraint is a flexible bar, which is fused tothe pipe to create a welded shoulder that can restrain the axial movement.(e.g. a puddle flange)

Flex Restraint

35

electrofusion49380 EF Transition Saddle

49580 EF Branch Saddlemulti-size250 - 400mm450 - 800mm

49210 EF Male Transition Coupler

Code d Bag £ ea49411533 32 x 1” 1 59.92 49411544 40 x 1 1/4” 1 75.14 49411555 50 x 1 1/2” 1 86.15 49411566 63 x 2” 1 106.75

49411 EF Male Free Nut Coupler

Code d Bag £ ea49410522 25 x 3/4” 1 40.3749410533 32 x 1” 1 47.4949410544 40 x 1 1/4” 1 57.2349410553 50 x 1” 1 65.7849410566 63 x 2” 1 83.67

49410 EF Female Free Nut Coupler

Code d Bag £ ea49310511 20 x 1/2” 1 28.34 49310522 25 x 3/4” 1 32.95 49310532 32 x 3/4” 1 37.02 49310533 32 x 1” 1 37.55 49310543 40 x 1” 1 45.73 49310544 40 x 1 1/4” 1 45.73 49310545 40 x 1 1/2” 1 48.42 49310555 50 x 1 1/2” 1 55.65 49310556 50 x 2” 1 64.31 49310565 63 x 1 1/2” 1 64.04 49310566 63 x 2” 1 70.05

49710 EF Male Transition Coupler PE

Code d Bag £ ea49710511 20 x 1/2” 1 14.15 49710522 25 x 3/4” 1 17.90 49710533 32 x 1” 1 19.39 49710544 40 x 1 1/4” 1 23.86 49710555 50 x 1 1/2” 1 32.49 49710566 63 x 2” 1 37.52

Code d Bag £ ea49210511 20 x 1/2” 1 30.7849210522 25 x 3/4” 1 31.7449210531 32 x 1/2” 1 31.7449210532 32 x 3/4” 1 31.7449210533 32 x 1” 1 31.7449210534 32 x 1 1/4” 1 40.0949210535 32 x 1 1/2” 1 43.0149210543 40 x 1” 1 38.2749210544 40 x1 1/4” 1 38.2749210545 40 x 1 1/2” 1 40.5449210546 40 x 2” 1 55.0149210553 50 x 1” 1 43.4349210554 50 x 1 1/4” 1 44.5449210555 50 x 1 1/2” 1 45.8449210556 50 x 2” 1 57.2549210564 63 x 1 1/4” 1 66.5549210565 63 x 1 1/2” 1 61.4149210566 63 x 2” 1 63.2149210576 75 x 2” 1 91.2349210577 75 x 2 1/2” 1 91.23

49217 EF Weldable TransitionMale Adaptor

Code d Bag £ ea49217511 20 x 1/2” 1 21.4749217522 25 x 3/4” 1 25.3449217532 32 x 3/4” 1 31.1449217533 32 x 1” 1 31.1449217540 40 x 1” 1 40.0249217544 40 x 1 1/4” 1 39.0649217545 40 x 1 1/2” 1 42.1849217554 50 x 1” 1 44.7649217555 50 x 1 1/2” 1 42.8449217556 50 x 2” 1 50.0249217565 63 x 1 1/2” 1 56.7749217566 63 x 2” 1 55.6249217752 75 x 2 1/2” 1 79.97

www.plasson.co.uk

49317 EF Weldable Transition Female Adaptor

Code d Bag £ ea49317511 20 x 1/2” 1 37.16 49317522 25 x 3/4” 1 42.1549317532 32 x 3/4” 1 49.09 49317533 32 x 1” 1 54.91 49317534 40 x 1 1/4” 1 48.83 49317555 50 x 1 1/2” 1 77.82 49317556 50 x 2” 1 77.82 49317565 63 x 1 1/2” 1 56.22 49317566 63 x 2” 1 82.10

49310 EF Female Transition Coupler

electrofusion

36

49750 EF PE Male Transition Elbow 90°

Code d Bag £ ea49750522 25 x 3/4” 1 22.86 49750533 32 x 1” 1 23.6449750544 40 x 1 1/4” 1 29.9449750555 50 x 1 1/2” 1 31.2249750566 63 x 2” 1 40.77

49260 Male TransitionElbow 45°

Code d Bag £ ea49260533 32 x 1” 1 36.80 49260544 40 x 1 1/4” 1 48.60 49260555 50 x 1 1/2” 1 55.93 49260566 63 x 2” 1 61.87 49260577 75 x 2 1/2” 1 95.20

49760 EF PE Male TransitionElbow 45°

Code d Bag £ ea49760533 32 x 1” 1 23.64 49760544 40 x 1 1/4” 1 29.94 49760555 50 x 1 1/2” 1 31.22 49760566 63 x 2” 1 40.77

49350 Female TransitionElbow 90°

Code d Bag £ ea49350511 20 x 1/2” 1 28.02 49350522 25 x 3/4” 1 31.78 49350533 32 x 1” 1 38.33 49350544 40 x 1 1/4” 1 44.44 49350555 50 x 1 1/2” 1 56.83

49250 Male TransitionElbow 90°

Code d Bag £ ea49250511 20 x 1/2” 1 26.79 49250522 25 x 3/4” 1 30.39 49250533 32 x 1” 1 38.61 49250544 40 x 1 1/4” 1 44.44 49250555 50 x 1 1/2” 1 56.83 49250566 63 x 2” 1 64.39 49250577 75 x 2 1/2” 1 95.20

49450 Female Free Nut TransitionElbow 90°

Code d Bag £ ea49450522 25 x 3/4” 1 40.38 49450523 25 x 1” 1 47.49 49450533 32 x 1” 1 47.49 49450534 32 x 1 1/4” 1 53.18 49450545 40 x 1 1/2” 1 60.08 49450556 50 x 2” 1 75.88 49450566 63 x 2” 1 83.67

49451 Male Free Nut TransitionElbow 90°

Code d Bag £ ea49451533 32 x 1” 1 59.92 49451544 40 x 1 1/4” 1 82.62 49451555 50 x 1 1/2” 1 86.15 49451566 63 x 2” 1 106.82

49360 Female TransitionElbow 45°

Code d Bag £ ea49360533 32 x 1” 1 38.22 49360543 40 x 1” 1 40.34 49360555 50 x 1 1/2” 1 61.08 49360566 63 x 2” 1 66.12

electrofusion 37

electrofusion

notes

www.plasson.co.uk

valves

38

VALVES Plasson valves have been in service in excess of 45 years in many demanding applications.

Proven Reliability: Safe control of water supplies for many years worldwide.

Robust Construction: The use of high quality materials and modern sealing systems yields long service life.

Comprehensive Solution: Many patterns of valves available for simple on/off or flow control, non-return and air release functions, as well as terminal fittings for hose connections.

Innovation: Quick Coupling connector for use with hoses, valves for electro-fused systems and flow control valves with seals for chemical applications.

Up to date Solutions: All brass stop valves are manufactured from the latest ‘Green List’ materials to comply with the impending material requirements of the EU to improve water quality and are suitable for underground use.

valves

39

valves

3407 Stop TapAbove & Below Ground

Code d Bag £ ea3407CC0 20 5 22.29 3407DD0 25 5 31.58 3407EE0 32 5 48.93

3405 Stop TapAbove & Below GroundFI x FI

Code d Bag £ ea3405200 3/4” 5 11.00 3405300 1” 5 11.96

Code d Bag £ ea 0341U0020 20 5 24.510341U0025 25 5 34.730341U0032 32 5 53.83

Code d Bag £ ea03410020015 20 x 15 5 31.08 03410025015 25 x 15 5 42.03 03410025022 25 x 22 5 43.84 03410032028 32 x 28 5 61.86

0341C Pushfit Stop TapPE x Copper(table X)/PB/PEX

Components for 3610Code d Bag £ ea3612025 750mm tube 1 10.843613025 sleeve 1 4.64 3611025 base 1 9.293614025 4” surface box plastic 1 8.993605001 6” surface box cast 1 48.50

• Suitable for 20, 25 and 32mm Plasson stop taps.

• 750mm guard tube can be cut to length.

• Plastic lid: 1 ton rated (Class C rated).

• Cast iron lid: 5 ton rated (Class B rated).

• Provides access to a stop tap for key operation.

Code d Bag £ ea3610 plastic lid 1 30.39 36101 cast lid 1 71.66

3610 Stop Tap Chamber

3489 Stop Tapfor Imperial Pipe

Code d Bag £ ea3489110 1/2” 5 25.63 3489220 3/4” 5 36.32

7509 Stop TapNormal Gauge

Code d Bag £ ea7509205 1/2” x 1/2” 10 21.17 7509257 3/4” x 3/4” 10 25.27

7609 Stop TapHeavy Gauge

Code d Bag £ ea7609205 1/2” x 1/2” 10 21.17 7609257 3/4” x 3/4” 10 25.27

valves

40 www.plasson.co.uk

0341 Pushfit Stop TapAbove & Below Ground

Code d Bag £ ea9050020 20 1 42.26 9050025 25 1 53.36 9050032 32 1 111.74

9053 Stop Tap Gun MetalBS5433 FI x FI

Code d Bag £ ea9053100 1/2” 1 28.66 9053200 3/4” 1 65.20 9053300 1” 1 70.56 9053500 1 1/2” 1 257.86 9053600 2” 1 358.13

9051 Universal Stop Tap DZRAbove & Below GroundSquare Drive

Code d Bag £ ea9051528 20 1 42.26 9051529 25 1 53.36 9051530 32 1 111.74

9061 Plug Tap DZRWIS 4-23-04 Type

Code d Bag £ ea9061DD0 25 1 74.97 9061EE0 32 1 97.55

9048A Universal Stop Tap DZR Above & Below Ground

236010 Ball Valve PPAbove & BelowGround

Code d Bag £ ea236010020 20 1 30.58236010025 25 1 33.72236010032 32 1 39.03

236020 Ball Valve PPPE x MI Above &Below Ground

Code d Bag £ ea236020020005 20 x 1/2” 1 28.51236020025007 25 x 3/4” 1 31.75236020032010 32 x 1” 1 36.67

236030 Ball Valve PPPE x FI Above &Below Ground

Code d Bag £ ea236030020005 20 x 1/2” 1 29.69236030025007 25 x 3/4” 1 32.93236030032010 32 x 1” 1 38.23236030032013 32 x 1 1/4” 1 40.31

9050 Universal Stop Tap DZRAbove & Below Ground

41

valves

valves

Code d Bag £ ea9048A 50 1 271.90 9048A63 63 1 282.04

Code d Bag £ ea9048 1 1/2” FI / 2” MI 1 232.50

9048 Universal Stop Tap DZR Above & Below GroundFI / MIInternal 1 1/2” FI thread & external 2”MI thread - use threaded adaptor to suit.

1300 Ball Valve PVCEconomy FI x FI

Code d Bag £ ea1300110 1/2” 1 2.771300220 3/4” 1 3.651300330 1” 1 5.161300440 1 1/4” 1 7.611300550 1 1/2” 1 10.301300660 2” 1 13.471300770 2 1/2” 1 43.48

1148 Ball Valve EF PVCDouble Spigot

Code d Bag £ ea1148020 20 1 24.21 1148025 25 1 26.03 1148032 32 1 29.82 1148040 40 1 38.06 1148050 50 1 46.25 1148063 63 1 57.27

1378 Ball Valve EF PVCPE x Single Spigot

Code d Bag £ ea1378020 20 1 18.30 1378025 25 1 19.761378032 32 1 23.05 1378040 40 1 31.24 1378050 50 1 38.93 1378063 63 1 58.38

Code d Bag £ ea1061000 3/8” 1 30.191061100 1/2” 1 30.291061200 3/4” 1 37.351061300 1” 1 42.471061400 1 1/4” 1 53.411061500 1 1/2” 1 78.051061600 2” 1 109.42

1061 Non Return Valve PVCFI x FI

Code d Bag £ ea1631000 3/8” 1 30.191631100 1/2” 1 30.291631200 3/4” 1 37.351631300 1” 1 42.471631400 1 1/4” 1 53.411631500 1 1/2” 1 78.051631600 2” 1 109.42

1631 Air Release Valve PVCVertically MountedFI x FI

Code d Bag £ ea2099001 1/2” 1 17.912099002 3/4” 1 21.882099003 1” 1 31.80

2099 Arctic Ball ValveIce ResistantFI x FI

Code d Bag £ ea13791C0 20 x 1/2” 1 18.3613792D0 25 x 3/4” 1 21.0813793E0 32 x 1” 1 28.4413794F0 40 x 1 1/4” 1 34.2713795G0 50 x 1 1/2” 1 46.6713796H0 63 x 2” 1 82.81

1151 Ball Valve PVC Double Union FI x FI

Code d Bag £ ea1151000 3/8” 1 18.241151110 1/2” 1 18.241151200 3/4” 1 19.571151300 1” 1 24.391151400 1 1/4” 1 25.591151500 1 1/2” 1 42.151151600 2” 1 57.231151770 2 1/2” 1 149.821151880 3” 1 198.501151900 4” 1 250.99

www.plasson.co.uk

valves

42

1379 Ball Valve PVCPE x FI

3039 Quick Coupling Connectors & Key

Code d Bag £ ea 3039200 3/4” Connector 1 16.993039300 1” Connector 1 16.993139200 3/4” Key 1 7.15

43620 EF Ball ValveDouble Spigot

Code d Bag £ ea436207025 25 1 134.82 436207032 32 1 134.82 436207040 40 1 155.56 436207050 50 1 186.67 436207063 63 1 197.05 436207075 75 1 207.41 436207090 90 1 362.98 436207110 110 1 414.83 436207125 125 1 466.69

Code d Bag £ ea9057100 1/2” 1 8.829057200 3/4” 1 15.439057300 1” 1 20.95

9057 Double Check Valve DZRFI x FI (Non WRAS)

Code d Bag £ ea9077100 1/2” 1 21.599077200 3/4” 1 44.789077300 1” 1 78.709077500 1 1/2” 1 192.539077600 2” 1 249.31

9077 Double Check Valve DZRFI x FI (WRAS)

Code d Bag £ ea9078500 1 1/2” 1 91.109078600 2” 1 117.97

9078 Single Check Valve DZRFI x FI (WRAS)

Code d Bag £ ea9095 3/4” - 1/2” 1 74.09

9095 PRV & Gauge1/2” FI / 3/4” MI

Code d Bag £ ea3047100 1/2” 1 11.923047200 3/4” 1 13.303047300 1” 1 15.773047400 1 1/4” 1 44.773047500 1 1/2” 1 50.213047600 2” 1 62.12

3047 Angle Seat Valve PPMI x MI

Code d Bag £ ea30481C0 20 x 1/2” 1 14.4930482D0 25 x 3/4” 1 14.7530483E0 32 x 1” 1 18.1130484F0 40 x 1 1/4” 1 53.0630485G0 50 x 1 1/2” 1 58.7530486H0 63 x 2” 1 73.78

3048 Angle Seat Valve PPPE x MI Thread

valves 43

valves

Code d Bag £ ea9056C00 1/2” 1 11.749056D00 3/4” 1 31.80

9056 Bib Tap Hose Union DZRc/w Double Check Valve

Code d Bag £ ea2100001 1/2” 1 17.912100003 3/4” 1 27.512100004 1” 1 40.47

2100 Arctic Ice ResistantBib Cock

9070 Bib Tap DZRLockshield BS1010

Code d Bag £ ea9070100 1/2” 1 20.95

Code d Bag £ ea9076100 1/2” 1 7.959076200 3/4” 1 19.40

9076 Bib Tap Hose Union DZR

2100 Bib CockLever Handle

Code d Bag £ ea2100005 1/2” 1 8.662100007 3/4” 1 15.92

Code d Bag £ ea9071100 1/2” 1 41.79

9071 Bib Tap DZRLockshield BS1010with Check Valve

7750 Wall Plate Elbow PP

Code d Bag £ ea7750C10 20 x 1/2” 5 9.457750D20 25 x 3/4” 5 12.61

9055 Wall Plate Elbow DZR

Code d Bag £ ea9055C10 20 x 1/2” 1 20.559055D20 25 x 3/4” 1 25.79

Code d Bag £ ea1075U0020005 20 x 1/2” 1 10.121075U0020007 20 x 3/4” 1 10.121075U0025005 25 x 1/2” 1 13.491075U0025007 25 x 3/4” 1 13.49

1075 Pushfit Wall Plate Elbow PP

1000 Wall Plate Elbow

Code d Bag £ ea1000C10 20 x 1/2” 1 12.081000D10 25 x 1/2” 1 12.841000D20 25 x 3/4” 1 16.01

www.plasson.co.uk

valves

44

valves 45

valves

notes

www.plasson.co.uk

metering

46

METERING Plasson metering products have been developed according to the UK market demand and Water Utility company requirements.

Comprehensive Solution: Meter boxes, internal metering manifolds and multi-port metering manifolds to suit every need.

Proven Reliability: Many of the elements are standard Plasson products which provide safe and reliable connections for water throughout the world.

Simple to use: All ‘O’ ring sealed manifolds make assembly on site easy.

Robust Construction: polypropylene and polyethylene are principle materials, well known to be extremely durable.

Large Range: Volumetric meters for chargeable applications as well as Multi-Jet flow meters and even agricultural meters for coping with less than pure water.

47

metering

metering

3511 Meter Mount KitBelow Ground - No Drain Off

Code d Bag £ ea 3511015 25 1 48.83

3517 Meter Mount KitInternal - with Drain Off

Code d Bag £ ea 3517015 25 x 15 1 75.733517022 25 x 22 1 75.73

3510 Meter MountAbove Ground

Code d Bag £ ea 3510015 15 1 33.47

Meter mount kits are suitable for a range of applications including underground and internally mounted systems. WRAS approved to suit individual utility company requirements.The Plasson multiport manifold system is available in a number of configurations for applications such as multi-occupancy premises. The 25mm outlets can be fitted with either a meter mount kit or with a stop valve.

www.plasson.co.uk

Water Metering

3523 Manifold 2” End Connection

Code d Bag £ ea3523003 3 Port x 25mm 1 323.993523004 4 Port x 25mm 1 371.623523006 6 Port x 25mm 1 419.24

Code d Bag £ ea3535001 25mm x 22mm 1 108.71

3535 Meter Mount Kit AConnection to 22mmCopper, PB, PEX

Code d Bag £ ea3536001 25mm x 25mm 1 111.59

3536 Meter Mount Kit BConnection to25mm MDPE

To comply with water regulations for multi dwelling occupancies, use Plasson multi port manifolds with meter mounts kits A or B. Kits contain stop tap, meter housing, double check valve (WRAS), drain valve (WRAS) and connection to either 25mm PE or 22mm copper/PB/PEX. Blanking off an end feed manifold requires using a dead leg kit to remove the possibility of stagnant water.

metering

48

Code d Bag £ ea3524004 4 Port x 25mm 1 332.403524006 6 Port x 25mm 1 368.22

3524 Manifold 2” Centre Connection

metering

3513 Standard Meter Box

Code d Bag £ ea 3513 c/w cast lid 1 119.913514 c/w plastic lid 1 92.15

Available with cast iron or plastic lids: includes 3511 manifold assembly.

Components for 3513/4Code d Bag £ ea3602001 650mm guard tube 1 17.303607001 foam insulation plug 1 2.733513A meter box base 1 8.253605001 6” surface box cast 1 48.503615025 9” surface box plastic 1 24.91

3543 Adjustable Meter Box

Code d Bag £ ea 3543 25 1 119.91

25mm pushfit for connection. Heightadjustable 500mm - 800mm.

Code d Bag £ ea3518001 Trickle flow 1 1/2” 1 15.403518002 Full flow 1 1/2” 1 5.803518003 No flow 1 1/2” 1 13.65

3518 Meter Mount Plug

Code d £ ea3534000 dead leg plug kit for end feed 2” 44.54

3534 Dead Leg Kitfor use with EndConnection Manifold

Meter box options are standard adjustable and adjustable for contaminated ground. Standard box available with a choice of plastic or cast iron lid.

Code Nominal Size Nominal FlowRate (m3/h)

£ ea

9001 15mm 1.6 105.29

9001 Concentric Water Meter1 1/2” BSPDomestic use PN16 positive displacement, ISO 4064 (Class D) Horizontal, vertical or inclined installation position.

9006 WMR Type Meter

Code Nominal Size Nominal Flow Rate m3/h)

£ ea

9006660 2” 20 396.90

For irrigation and agriculture. ISO 4064: allows foreign matter to pass without clogging.2” BSP connection.

Code NominalSize

Nominal FlowRate (m3/h)

£ ea

9015110 1/2” 1.5 116.229015220 3/4” 2.5 121.109015330 1” 3.5 167.529015440 1 1/4” 6 185.909015550 1 1/2” 10 327.389015660 2” 15 415.53

9015 Multi-jetBrass BodyMagnetic PN10, ISO 4064 Agricultural and industrial use. Horizontal installation only.

Code NominalSize

Nominal FlowRate (m3/h)

£ ea

9010110 1/2” 1.5 111.059010220 3/4” 2.5 119.86

Magnetic PN10, ISO 4064 Agricultural and industrial use. Horizontal installation only.

9010 Multi-jetReinforced Polymeric Body

3544 Adjustable Meter Boxfor Contaminated Land

Code d Bag £ ea 3544 3/4” 1 206.12

Brass 3/4” threaded connection. Height adjustable 500mm - 800mm.

49

metering

Plasson’s range of Repair Clamps are designed to repair water mains pipes where corrosion or mechanical damage has caused leakage. The clamps materials are selected to give maximum service life and the clamp is designed for ease of use. All materials meet the requirements of WRAS and DWI Reg 31 for use on potable water systems.

6800 Repair Clamp Stainless (300mm - 4 bolt)

Code d Bag £ ea6800110 210-223 x 300 1 208.566800120 222-234 x 300 1 210.156800130 243-255 x 300 1 226.176800140 273-285 x 300 1 309.126800150 285-297 x 300 1 309.12

Stainless Steel Repair Clamps•PN16 pressure rating.

•Stainless Steel construction with Ductile clamping jaws.

•Wrap around design.

•Can be used on live mains.

•Excellent tolerance range.

•Wide size range available.

•Light and Easy to handle.

•Cost effective.

•Waffle type seal.

•Captive bolts with nuts that do not require removal to use the clamp.

•Design reduces the size of excavation required.

6800 Repair Clamp Stainless(200mm - 3 bolt)

Code d Bag £ ea6800750 78-88 x 200 1 106.826800800 88-98 x 200 1 111.236800850 92-103 x 200 1 117.096800875 108-118 x 200 1 119.566800900 114-126 x 200 1 121.786800100 168-182 x 200 1 141.56

Code d Bag £ ea6800200 21-25 x 76 1 10.106800300 26-30 x 76 1 11.366800400 33-37 x 76 1 12.006800500 42-45 x 76 1 12.226800600 48-51 x 76 1 12.556800700 60-65 x 76 1 20.60

6800 Repair Clamp Stainless(76mm - 1 bolt)

www.plasson.co.uk

Repair Clamps

Component MaterialsClamp Shell Stainless Steel AISI 304 18.8Clamp Jaws EN-GJS-400-15 acc. to UNI EN

1563 normsWaffle seal EPDM APE 55N Shore 53 + or -5Bolts High Tensile Steel, Galvanised

M14 (multi bolt)WRAS Cert No 1009550

Materials Chart

repair clamps

50

Ductile Repair Clamps•PN16 Pressure Rating.

•Made from Ductile Iron with Epoxy Coating and stainless bridging plates.

•Two part body separates so it can be used without cutting the pipe.

•Excellent tolerance range.

•Extremely strong and durable.

•Cost effective.

•Captive bolts with heads retained in recesses.

•Only one tool required for tightening.

•Waffle type seal ensuring optimum seal.

• Innovative design reduces the size of the excavation required.

repair clamps

Code d Bag £ ea6801B00 92-103 x 200 1 153.246801CC00 115-125 x 200 1 162.666801D00 141-154 x 200 1 172.906801E00 166-181 x 200 1 186.846801F00 216-226 x 200 1 320.70

Component MaterialsClamp Body Ductile Iron GJS 400-15 UNI EN

1563Clamp Coating

PPA 571 ES Blue 536

Bridging Plates

Stainless Steel AISI 304 18.8

Waffle Seal EPDM APE 55N Shore 53 + or -5Bolts High Tensile Steel, Galvanised

M12 and M16WRAS Cert No 1009550

Materials Chart

51

repair clamps

6801 Repair Clamp Ductile Iron(200mm - 4 bolt)

5117 Threaded Reducing Socket

Code d Bag £ ea5117210 3/4” x 1/2” 10 2.23

Code d Bag £ ea5047111 1/2” 10 2.825047222 3/4” 10 3.085047333 1” 10 4.565047444 1 1/4” 5 6.635047555 1 1/2” 5 7.805047666 2” 5 8.52

5047 90° Threaded Tee

5067 Threaded Nipple

Code d Bag £ ea5067110 1/2” 10 1.565067220 3/4” 10 1.745067330 1” 10 2.065067440 1 1/4” 10 3.145067550 1 1/2” 10 4.135067660 2” 5 6.095067880 3” (PVC)* 1 18.10

Code d Bag £ ea5065210 3/4” x 1/2” 10 1.745065310 1” x 1/2” 10 2.065065320 1” x 3/4” 10 2.065065410 1 1/4” x 1/2” 10 3.145065420 1 1/4” x 3/4” 10 3.145065430 1 1/4“ x 1” 10 3.145065510 1 1/2” x 1/2” 10 4.135065520 1 1/2” x 3/4” 10 4.135065530 1 1/2” x 1” 10 4.135065540 1 1/2” x 1 1/4” 10 4.135065610 2” x 1/2” 5 6.095065620 2” x 3/4” 5 6.095065630 2” x 1” 5 6.095065640 2” x 1 1/4” 5 6.095065650 2” x 1 1/2” 5 6.09

5065 Reducing Nipple

5177 Threaded Plug

Code d Bag £ ea5177000 3/8” 10 1.235177100 1/2” 10 1.315177200 3/4” 10 1.395177300 1” 10 1.905177400 1 1/4” 10 2.235177500 1 1/2” 5 3.405177600 2” 5 5.34

5077 Threaded Cap

Code d Bag £ ea5077100 1/2” 10 1.315077200 3/4” 10 1.395077300 1” 10 1.895077400 1 1/4” 10 2.235077500 1 1/2” 10 3.405077600 2” 10 4.83

Code d Bag £ ea5017110 1/2” 10 1.865017220 3/4” 10 2.725017330 1” 10 3.405017440 1 1/4” 10 3.725017550 1 1/2” 10 4.345017660 2” 5 9.715017880 3” (PVC)* 1 23.60

5017 Threaded Socket

A range of quality BSP threaded fittings made from Polypropylene and rated to 16 bar. Ideal replacement for gunmetal and bronze that will not corrode. We recommend the use of PTFE tape on all threaded fittings (see page 55).

Threaded fittings, PN16

www.plasson.co.uk

polypropylene threaded fittings

52

Code d Bag £ ea5157110 1/2” 10 2.375157220 3/4” 10 2.935157330 1” 10 3.61

5157 Male/FemaleThreaded Elbow

5027 Reducing Bush

Code d Bag £ ea5027100 1/2” x 3/8” (PVC)* 10 1.795027200 3/4” x 3/8” (PVC)* 10 1.825027210 3/4 “ x 1/2” 10 1.745027310 1” x 1/2” 10 1.905027320 1” x 3/4” 10 1.905027410 1 1/4” x 1/2” 10 2.455027420 1 1/4” x 3/4” 10 2.455027430 1 1/4” x 1” 10 2.455027510 1 1/2” x 1/2” 10 2.995027520 1 1/2” x 3/4” 10 2.995027530 1 1/2” x 1” 10 2.995027540 1 1/2” x 1 1/4” 10 2.995027610 2” x 1/2” 5 4.635027620 2” x 3/4” 5 4.635027630 2 “ x 1” 5 4.635027640 2” x 1 1/4” 5 4.635027650 2” x 1 1/2” 5 4.635027760 2 1/2” x 2” 5 6.225027830 3” x 1” 2 10.115027840 3” x 1 1/4” 2 10.115027850 3” x 1 1/2” 2 10.115027860 3” x 2” 2 10.115027870 3” X 2 1/2” 2 10.115027960 4” x 2” 2 10.215027980 4” x 3” 2 10.21

Code d Bag £ ea5169055 1/2” 1 6.345169077 3/4” 1 7.505169110 1” 1 8.565169150 1 1/2” 1 13.465169220 2” 1 20.08

5168 PVC Tank Connector

Code d Bag £ ea5168200 25 x 3/4” 1 13.355168300 32 x 1” 1 19.48

5167 Threaded Riser

Code d Bag £ ea5167110 1/2” 10 2.45516721M 3/4” x 1/2” 10 3.245167220 3/4” 10 3.245167330 1” 10 5.255167440 1 1/4” 5 5.505167540 1 1/2” x 1 1/4” 5 5.955167550 1 1/2” 5 5.95

5361 Male Hose Adaptor(PVC)

Code d Bag £ ea5361100 1/2”BSP x 20mm NB 20 2.155361200 3/4”BSP x 25mm NB 10 2.685361300 1”BSP x 30mm NB 10 2.825361600 2”BSP x 60mm NB 1 6.32

5362 Female Hose Adaptor(PVC)

Code d Bag £ ea5362200 3/4”FEM x 16mm NB 20 5.545362300 1”FEM x 20mm NB 10 5.54

Code d Bag £ ea5057110 1/2” 10 2.135057220 3/4” 10 2.825057330 1” 10 3.515057440 1 1/4” 5 4.885057550 1 1/2” 5 5.605057660 2” 5 7.06

5057 90° Threaded Elbow

* PVC items PN10

threaded 53

polypropylene threaded fittings5169 PP Tank Connector

60123 Pipe Squeeze Tool

Code d Bag £ ea60123 16-32 1 54.8560123A 32-63 1 92.10

60124 Water Valve KeyUniversal

Code d Bag £ ea60124 1 42.10

7991 Tapper Assembly Toolfor use with16540 & 49630

Code d Bag £ ea7991001 1 48.73

4363 Operating Keyfor use with EFBall Valve 43620

Code d Bag £ ea4363 77.18

1247 EF Hand Scraper

Code d Bag £ ea1247 1 1/2” 1 32.291248 2 1/2” 1 46.46

7992 Strap WrenchUniversal

Code d Bag £ ea7992001 20-90 1 33.60

7960 Chamfer Tool

Code d Bag £ ea7960010 20-63 1 67.76

60125 Pipe Shears

Code d Bag £ ea60125 20-32 1 39.9260126 20-63 1 95.98

7990 Mechanical Wrench

Code d Bag £ ea7990BJ0 16-40 1 6.427990FJ0 40-75 1 40.347990GL0 63-125 1 55.74

Code d Bag £ ea10990004P 20-32 1 24.5310990002P 40-63 1 42.33

1099 Pushfit Wrench

www.plasson.co.uk tools

tools

54

F80 Silicone Grease Lubricant(WRAS)

Code d Container £ eaF8029 30ml (tub) 1 7.62F8030 500ml (spray) 1 18.33

4897 Hand Wipes

Code d Tub £ ea4897 1 25.91

4898 Hand Cleaner

Code d Tub £ ea4898 1 16.32

4899 EF Wipes Tub

Code d Bag £ ea4899 1 27.56

4901 EF Wipes Sachet

Code d Bag £ ea4901 (per sachet) 0.44

4902A Marker Pen

Code d Bag £ ea4902A 1 7.28

60120 Pipe ClipMetric Pushfix

Code d Tub £ ea60120C00 20 100 0.4060120D00 25 100 0.4360120E00 32 100 0.4960120G00 50 50 0.8960120H00 63 50 0.99

6000 PTFE Tape

Code d Carton £ ea6000 1 0.98

accessories 55

tools / accessories

Code d Bag £ ea1257 63-180 1 365.011257002 90-315 1 548.561257001 180-400 1 604.88

Code d Bag £ ea1243 32-110 1 427.591244 110-225 1 1,006.391244001 110-560 strap type 1 766.53

Code d Bag £ ea1275000 63 1 71.511275008 75 1 81.941275001 90 1 84.921275002 110 1 92.371275003 125 1 98.331275004 160 1 113.231275005 180 1 123.661275006 200 1 131.111275007 225 1 156.431275009 250 1 265.19

1270 HydraulicRe-rounding Tool

Code d Bag £ ea1270 450-800 1 1,946.31

1269 MechanicalRe-rounding Tool

Code d Bag £ ea1269 250-400 1 804.07

Code d Bag £ ea1262001 90 - 160 split plate 1 2,460.00

126200 Split Clamping PlateFor 49590 flangedmulti-size saddle

Code d Bag £ ea1262002 80 1 490.161262003 100 1 490.161262004 150 1 490.16

Code d Bag £ ea1242 90-225 1 667.4512420001 90-315 1 813.46

1242/0001 RotationalScraper Tool

Code d Bag £ ea1258 20-75 1 78.961258001 50-140 1 101.311258002 90-160 1 125.15

Code d Bag £ ea1240 20-63 1 359.801241 25-110 1 385.87

1240/1 Scraper ToolRotary

www.plasson.co.uk

Electrofusion jointing is most reliable when completed with good quality scraping equipment , clamps and re-rounding tools. To hire Plasson installation tools please contact MCA Hire.

Electrofusion Specialist Tooling

specialist tooling

56

1262 LD Saddle Clamp KitFor multi-size saddles

1257 Pipe End Scraper

1258 Rotary PipeCutter

1243/4 Pipe Clamp

1275 Re-rounding Ring

1259 Chain Scraper 250-800

Code d Bag £ ea1259 250-800 1 1,533.06

1274 Core Cutterfor use with LDSaddle 49580& 49590

Code d Bag £ ea1274071 For use with 90mm off-take 1 326.111274087 For use with 110mm off-take 1 326.111274099 For use with 125mm off-take 1 326.111274127 For use with 160mm off-take 1 348.00

1268 Rotary Pipe Saw

Code d Bag £ ea1268 500-1200 1 5,068.47

Code d Bag £ ea49009991 1 164.33

49009991 Tension Beltfor Flex Restraint

Code d Bag £ ea1265 mains powered 1 1,220.191266 cordless 1 1,616.49

1265 Electric SaddleScraper

specialist tooling

Electrofusion ControllersPlasson offer quality control boxes ensuring easy installation and safe, dependable connections. Plasson fittings include an automatic recognition system which is part of the complete smart system. The entire electrofusion process is executed and fully monitored by the computerised control box. Plasson electrofusion fittings can be used with Plasson computerised smart system control box or with standard barcode systems.

DigimaticTime

DigimaticData

PolymaticPlus

Data InputBarcode-System - - xSmartFuse/FusamaticSystem

x x x

Manual x x xOutput Current80A (max.: 110A) - - x60A (max.: 80A) x x -Output Voltage8-48V - x x40V x - -Data RecordingAC/DC AC/~ AC/~ AC/~Standard - x xTraceability - - xInput Stage Input Voltage 110V (90V – 150V) Input Frequency 50Hz (40Hz – 70Hz)

Code d Bag £ ea1272 450-800 1 2,429.95

Please ensure you have a generator of adequate output to ensure trouble free operation.For more details call Plasson on01444 244446.

123 EF Control Box

Code d Bag £ ea1235 Digimatic Time Box 110V / 40V 1 1,395.001236 Digimatic Data Box 110V / 8-48V 1 1,465.001237 Polymatic Plus Box 110V / 8-48V 1 2,420.00

57

specialist tooling

1272 Strap Clampwith Pulling Shoe

Metric Fittings 20mm - 110mm and Imperial Fittings 1/2” - 2”

Draw the nut, collars, and O-ring over the end of the pipe to a distance of approx. 250mm (put the white split ring to one side for later use).

Insert the pipe into the body of the fitting until it meets the interior stop. Then draw the O-ring and collars close to the body of the fitting.

Tighten the nut with a Plasson wrench until the O-ring and collars enter the fitting and reach their end position. Unscrew nut from fitting.

Open the white split ring and mount onto pipe with larger side against the collar ensuring that both parts meet the body of the fitting. Screw the nut tightly onto the fitting using a Plasson wrench.

Metric Fittings - 125mm

Insert liner into pipe (metric 20mm-63mm only) and slacken nut until half the thread is visible.

Push pipe into body, through the nut, split ring, and O-ring.

Tighten nut firmly: Hand tight on pipe 20mm (½”) – 32mm (1”), on pipe 40mm(1 ¼”) and above use a Plasson wrench.

Metric Fittings - 160mm

• Undo and take out nuts & bolts.

• Take the two shell halves apart, remove the exposed sleeve & O-ring and place over the pipe end.

• Push the body of the fitting completely home over the pipe end.

• Place the two shell halves with grip rings over the pipe & fitting body.

• Insert bolts, washers, and nuts and tighten until the shells are in contact with each other.

Plass4 Universal Fittings

Prepare the pipe by removing any unsound material adhering to the pipe then cut and de-burr pipe as necessary.

Slide the universal end of the fitting onto the pipe end until it reaches the internal fins and a resistant point is felt. NOTE: Do NOT force pipe end past the internal fins as this may impair joint.

Tighten the black nut using a Plasson wrench or similar. Assemble the Metric PE joint as per the standard fitting instructions.

Note: If reusing the fitting, ensure the metal teeth are located in the grip ring, and the pipe end does not pass the location of the internal fins.

Plasson mechanical

www.plasson.co.uk

Note: For diameters 40mm and above, chamfering and lubrication of the pipe will ease insertion (use silicon lubricant). Metric fitting shown for illustrative purposes. Imperial fittings have black nuts.


58

Remove nut from fitting and discard white split ring (unless using 1 ½” pipe). Mount nut on pipe and assemble red split ring flush with the pipe end (reuse white split ring for 1 ½” pipe).

Push the barbed end of the adaptor into the pipe until it meets the stop. Then push the plain end of the adaptor into the fitting until it meets the stop.

Screw nut tightly towards the body of the fitting. Use a Plasson wrench for 1” pipeand above.

Imperial & Irish Pipe Adaptor (7786 / 7787 / 7788 / 7789 / 7995 / 7996)

Copper Adaptor Set table X and Y (7438)

Remove nut from fitting and discard white split ring (except 35, 42, and 54mm copper, where the white split ring is used as a spacer). Push black rubber seal into fitting body and assemble components in the order shown above.

Place nut onto fitting leaving half the thread visible. Cut the copper pipe square and remove all burrs and sharp edges. Mark pipe at “a” when the pipe end reaches the centre of the body of the fitting, as shown by “b” above.

Push and twist the pipe through the nut, adaptor and metal ring into the body of the fitting, until the mark is in line with the end of the nut as shown. Tighten the nut with a Plasson wrench.

a b

Universal Pipe Adaptor (7896/7898)

Prepare pipe by ensuring that the end is free from grease and roughen outer surface with wire wool or similar. Remove nut from end of fitting and mount onto pipe, discard white split ring.

Push adaptor into fitting to the stop. Also push and twist the pipe into the fittinguntil it meets the internal stop.

Screw the nut tightly towards the body of the fitting. Final tightening with a Plasson wrench is essential. The installations MUST be anchored against end loading.

Lead Adaptor (7782)

Remove nut from fitting and discard white split ring. Mount nut onto pipe followed by brown split ring and seal ring.

These components should be positioned 20mm from the pipe end.

Push pipe into the body of the fitting and tighten firmly with a Plasson wrench (it is important that the pipe is NOT pushed fully up to the stop inside the fitting).

Note: This product seals on the outside of the pipe and it is therefore important that the external part of the pipe (where the seal is made) is in good condition. If external pipe is of poor quality it may be preferable to use the Plass4 Universal fitting.

a

�tting instructions 59


Note: Lubrication of the pipe end will ease insertion (use silicon lubricant).

www.plasson.co.uk

For underground installations wrap the whole fitting and adjacent pipe with a self adhesive aluminium foil barrier tape (40 microns thick) ensuring a 50% overlap of the tape and that 50-100mm length of pipe either side of the fitting is covered. In addition, the foil taped fitting should be protected with a self adhesive waterproof tape or petrolatum tape (Denso).

Note: When PlasShield is installed in accordance with the above instructions, it provides resistance to chemical permeation. PlasShield does NOT guarantee absolute resistance. Applications may have rules, regulations and requirements including those of the local water company. It is the installer’s sole responsibility to enquire as to the existence of such rules, regulations and requirements and to implement them fully.

Remove nut and grip ring from fitting and discard grey nut. Mount black nut onto the pipe and assemble grip ring flush with the pipe end (discard white grip ring and use grey grip ring if provided).

Push the barbed end of the adaptor into the pipe until it meets the stop. Then push the plain end of the adaptor into the fitting until it meets the stop.

Screw nut tightly towards the body of the fitting using a Plasson wrench.

PlasShield Adaptor

Note: For Copper (table X) only - above ground use. Also the metal grip ring MUST be replaced if fitting is re-used.

Cut Copper pipe square and remove all burrs and sharp edges.

Twist the pipe into the fitting through the rubber O-ring to the stop.

Tighten thoroughly using a Plasson wrench.

Internal Water Meter Manifold (3510)

• Insert the bolts through the lower part of the saddle and lock them in position using the restraining clip.

• Place the lower part of the saddle on the underside of the pipe and place the upper part onto the bolts. Ensure that the EPDM seal is positioned correctly in the groove.

• Rotate the outlet to its desired position, hold and tighten the retaining nut until the outlet is locked in place. Do NOT over tighten.

• Connect the service pipe to the outlet following the standard mechanical Plasson fitting instructions.

• Remove the cap and screw the cutter (using the tapper assembly tool) clockwise into the main. NOTE: When the main is penetrated a reduction in torque is felt followed by an increase in torque as the lower stop is met. Do NOT continue to screw after this point.

• Unscrew the cutter anticlockwise back to the upper stop. This will release the flow of water into the service pipe. Replace the cap.

Self Tapping Swivel Tee

Plasson mechanical


60

Note: The cutter can be used in future to close the water supply by screwing it back into the main.

Insert liner into pipe then measure and mark correct insertion depth against fitting as shown.

Push pipe into fitting up to the mark ensuring the pipe has been pushed passed the internal O-ring.

Make sure the mark on the pipe is inline with the end of the fitting.

Assembly

Plasson pushfit

Note: For assembly of copper/PB/PEX, follow instructions above but ensure pipe manufacturers liner is fitted where applicable as per their instructions.

Prepare the pipe by removing any unsound material adhering to the pipe then cut and de-burr pipe as necessary.

Push the pipe into the fitting up to the internal stop.

Tighten firmly using a Plasson wrench or similar.

Pushfit Universal

�tting instructions

Insertion Depth

Before installation of all fittings, ensure that the end of the pipe to be inserted into the fitting is free of scratches and other imperfections and that both the pipe and the fitting itself are free of sand, mud, stones, etc. Where applicable ensure that split ring and grip ring teeth are sharp and bite into the pipe, to avoid pullouts if fittings are reused. If uncertain, replace the split ring and grip ring. Do not over tighten nuts when closing. Do not use wrenches or spanners with handle lengths longer than 46 cm. Alternatively replace split ring and grip ring where applicable. On MI and FI fittings and on Plasson threaded fittings use PTFE to seal the thread. Do not use thread seal pastes.

General note for all installations:

For EF joints ensure clean, dry working conditions and prepare pipe with appropriate tools to ensure removal of 0.2mm of surface of the pipe in the weld area.

For full jointing instructions please visit our website: plasson.co.uk or contact sales office, email: [email protected] Tel: 01444 244446

Using the Pushfit wrench, turn the nut anticlockwise to release pipe from fitting.

If the fitting is to be reused, the split ring, grip ring, and nut MUST be inserted in the order shown.

Disassembly

The metal grip ring in the copper/PB/PEX fittings MUST be replaced if the fitting is reused. Reassemble in the order shown.

Plasson electrofusion

61


Product Code Body Type Pressure Rating

Stainless SteelReinforcing

Ring

From Pipe Diameter

To PipeDiameter

From Thread ToThread

From Outlet Size

To Outlet Size

Mechanical & Pushfit

All Fittings All Fitting Types 16.0

Exception:

Starts with 17 All 160mm Fittings 10.0

Starts with 7 & 87 All Fittings with 3” Female Thread 10.0

Starts with 7 & 87 All Fittings with 4” Thread 6.0

77017 Plass4 (Universal) 10.0 50 50 35 50

7045 Slip Tee 12.5 40 63

7120 End Plug 12.5 20 63

7220 Compression Flange Adaptor 12.5 125 125

7250 Threaded Adaptor 12.5 75 75 1 1/2” 3”

7640/87640 45° Tee 8.0 63 110

Saddles

16076 Saddle Single Outlet 12.5 YES 20 63 1/2” 1 1/2”

16076 Saddle Single Outlet 12.5 YES 75 180 1/2” 3/4”

16076 Saddle Single Outlet 10.0 YES 75 180 1” 2”

16076 Saddle Single Outlet 16.0 YES 40 180 1” 1”

16176 Saddle Double Outlet 12.5 YES 20 63 1/2” 1 1/2”

16176 Saddle Double Outlet 10.0 YES 75 180 1” 2”

16540 Tapping Saddle 16.0

Valves

3047/3048 Angle Seat Valve 8.0

3405 Threaded Stoptap 10.0 3/4” 1”

3407 Stoptap 16.0 20 32

Plasson Threaded

All Fittings All Fitting Types 16.0

Exception:

Starts with 5 All Fitting Types 10.0 3/8” 3/8”

5017 Threaded Socket 10.0 3” 3”

5067 Threaded Nipple 10.0 3” 3”

www.plasson.co.uk

Mechanical and pushfit fittingsBody: Polypropylene, high grade copolymerNut: High Grade PolypropyleneSplit Ring and Grip Ring: Acetal (POM)Liner: Acetal (POM)Seal: Nitrile rubber (NBR)Reinforcing Ring: Stainless steel on all female offtakes from 1¼” up to 4”

Mechanical and pushfit fittingsMaterials

Threaded FittingsBody: Polypropylene, high grade copolymer. Reinforcing Ring: Stainless steel. Brass Threads: CW617

Flange dimensions in accordance with: BS 4504: 1989All Plasson products – MI and FI ThreadsAll threads conform to ISO - 7/1, BS 21, DIN 2999, NEN 3258, AS 1722 Part 1.All external (male) threads are tapered. All internal (female) threads ≤ 3”are parallel. (unless stated)

Operating TemperaturesThe fittings are not to be used with hot water, although they withstand the same temperature as the polyethylene pipe itself. The fittings and valves will withstand sub-zero temperatures.

Chemical ResistancePlasson fittings are supplied, as standard, with polyacetal split and grip rings and NBR seals which are suitable for water. For aggressive chemical applications CPVC split rings and EPDM or FPM O-rings can be supplied to produce a better chemical resistance.

Plasson mechanical and pushfit fittings are tested and approved according to ISO 14236. For detailed pressure classification see table below. For WRAS approvals, please visit http://www.wras.co.uk/directory/

Operating Pressures and Quality Certificates

Flanges

technical details

62

technical details

Electrofusion

Whereas the products shown in this catalogue illustrate and describe the current state of their development, Plasson reserves the right at all times to make such technical alterations as it shall see fit to its products. Although every care has been taken in the preparation of the information, specifications and other data included in this catalogue, we cannot rule out inadvertent errors or omissions. Purchasers should take into account possible deviations or variations which will not substantially diminish the functionality or performance of the products, and, in many cases, are designed to improve the same.

Plasson® is the Registered Trademark of Plasson Ltd. or Plasson Maagan Michael Industries Ltd. Plasson’s products are protected by patents, trademark, design and copyright laws.

MaterialsAll Plasson ElectroFusion fittings are produced from WRAS Approved material class PE100 which conform to international standards for potable water and natural or suitable manufactured gas systems.

Operating PressuresAll Plasson electrofusion fittings are rated:PN16 (Water)MOP10 (Gas)

Lightfit fittings are rated:PN10 (Water)

Note: For further details, see the notations on each fitting or consult your Plasson representative

Suitable PipesBS EN12201-2 PE80 & PE100. PN16 20mm to 75mm: weldable to pipes SDR 7.4 to SDR 11 **PN16 90mm to 800mm: weldable to pipes SDR 7.4 to SDR 17PN10 40mm to 75mm: weldable to pipes SDR 7.4 to SDR 17PN10 90mm: weldable to pipes SDR 7.4 to SDR 26PN10 110mm to 800mm: weldable to pipes SDR 7.4 to SDR 33PN25 50mm to 315mm: weldable to pipes SDR 7.4

Note: **PN16 elbows and equal tees 40mm to 90mm are suitable for welding to SDR 17 pipes. Some larger fittings are suitable for welding up to SDR 41 pipes. Most fittings are suitable for welding to PEX pipes. Please contact Plasson for details.

StandardsPlasson ElectroFusion fittings are designed, tested and quality controlled according to Plasson’s internal standards. These standards are based on the following international standards:BSEN 1555BSEN 12201WIS 4-32-14WIS 4-32-15WRAS

Plasson has incorporated a quality assurance system in accordance with ISO 9001. Operating according to the ISO 9001 quality assurance system imposes stringent standards of control throughout the manufacturing processes.

Electrofusion, welding and cooling times are specified on the individual products. Welding times can also be recognised by appropriately equipped control boxes through the red pin connector or barcode.

Pin Size: 4.7mm (Unless stated).Voltage: 40V (800mm 42v).Control box current capacity: <400mm 60/80amp / >400mm 80/110ampGenerators must be suitable for current load and be equipped with an automatic voltage regulator.

Quality

63

technical details

For full details of WRAS approvals: www.wras.co.uk or call Plasson on 01444 244446.

www.plasson.co.uk

notes

64

notes

65

notesnotes

www.plasson.co.uk

contact details

66

Scotland, NI & ROIGordon NobleEmail: [email protected]: 07788 185673

North West & North WalesJon HoltEmail: [email protected]: 07841 066309

North EastColin BakerEmail: [email protected]: 07788 185669

South EastSimon DenlyEmail: [email protected]: 07788 185670

West Midlands & Mid/South WalesGary WoodEmail: [email protected]: 07788 185672

East Midlands & East AngliaPaul SheltonEmail: [email protected]: 07786 156954

South West & Channel IslandsMark CumminsEmail: [email protected]: 07788 185671

Technical ManagerDuncan FisherEmail: [email protected]: 07788 185674

Sales & Marketing ManagerSimon MerckelEmail: [email protected]: 07788 185678

Plasson Sales Office Tel: 01444 244446 | Fax: 01444 258683 | Email: [email protected]

1. Definitions & InterpretationThe “Seller” means Plasson UK Limited.The “Buyer” means the party which places the Order with the Seller.The “Order” means the Order placed by the Buyer with the Seller for the supply of Goods.The “Goods” means the articles, products, components, units and/or any item described or referred to in the Order.The “Quotation” if applicable, means the written price quotation issued by the Seller to the Buyer, pursuant to which the Buyer places its Order.The “Price” means the prices for the Goods as agreed at the time of order placement, which my be revised from time to time. The Price quoted is per item supplied unless otherwise stated“Force Majeure” means an event, or a series of related events, that is outside the reasonable control of the party affected, including but not limited to, industrial disputes, disasters, explosions, terrorist attacks, wars and acts of God“Terms” means these terms & conditions of Sale2. Overriding of Prior Conditions Unless otherwise agreed in writing by the Seller, these conditions, which supersede any earlier sets of conditions appearing in the Seller’s literature or elsewhere, shall override any terms or conditions stipulated, incorporated or referred to by the Buyer, whether in the Order or in any negotiations. 3. Sale by Description All descriptive specifications, drawings and particulars of weight, dimensions and materials have been given by way of identification only and the use of such information shall not constitute a sale by description. The Seller’s employees and agents have no authority to make any representation, statement or report not contained in or incorporated into the Quotation and the Seller shall not be bound by any unauthorised representation, statement or report. 4. Variation of Specification If the Seller adopts any variation in construction, design, materials or specification of its Goods, the Buyer shall accept such Goods in fulfilment of the Order, provided that the Goods so varied remain of the same quality and perform the same function as before. 5. Assembly Instructions Where the Seller provides with the Goods instructions and/or advice regarding their assembly, installation and/or use, the Buyer, on selling or disposing of the Goods to any third party, is obliged to pass such instructions and/or advice on to such third party with the Goods. 6. Delivery Any date or time specified by the Seller for delivery of the Goods is intended as an estimate only and the Seller shall not be liable to make good any damage or loss arising either directly or indirectly out of any delay in delivery. Any dates for the delivery of the Goods agreed by the parties as part of an Order will not be of the essence of the Order. The Seller may at its absolute discretion dispatch and invoice Orders in whole or by instalments.7. Installation Where Goods are to be installed by or for the Seller, the Buyer shall ensure that a clear and suitable site is available and ready for the installation of the Goods and that the site is readily accessible to normal transport. Except where otherwise specified, the Seller shall not be responsible for labour or materials for any builders’ work, foundations, structural alterations, plumbing or electrical work. 8. Damage in Transit The Seller will replace or repair free of charge Goods damaged or lost in transit (except where such transit arrangements are made by the Buyer) provided that the Buyer gives the Seller written notification of such damage or loss within 48 hours of its occurrence, or such other time as will enable the Seller to comply with the carrier’s conditions of carriage regarding loss or damage in transit. 9. Risk The Goods are at the Buyer’s risk from the time of delivery to the Buyer’s premises or to such other destination as the Buyer designates in the Order. 10. Acceptance The Buyer shall inspect the Goods immediately upon their arrival and shall within 3 days from the time of their arrival give notice in writing to the Seller of any matter or thing by reason whereof the Buyer alleges that the Goods are not in accordance with the Order. If the Buyer fails to give such notice, the Goods shall be deemed to be in all respects in accordance with the Order and the Buyer shall be bound to accept and pay for the same accordingly. Goods sold may not be returned to the Seller without its prior written consent, which will only be given in exceptional circumstances. 11. Price The Price payable for the Goods shall be that shown in the Quotation and/or agreed at the time of order placement. The Seller is entitled at its sole discretion to increase the Price of the Goods at any time by giving to the Buyer 30 days notice in writing. The amounts payable under an Order are exclusive of all VAT and other taxes, which will be payable by the Buyer.12. Interest on Late Payment If the Buyer fails to make payment in full not later than the last day of the month following date of Seller’s invoice, or within such other time or times as has been agreed in advance in writing, the Seller at its discretion may charge the Buyer statutory interest on the overdue amount at the rate of 8% per year above the Bank of England base rate, from time to time, which interest will accrue daily until the actual payment date, be compounded and payable on demand. The Seller may claim interest and statutory compensation from the Buyer pursuant to the Late Payment of Commercial Debts (Interest) Act 199813. Retention of Title Legal property in the Goods shall remain with the Seller until payment in full is made by the Buyer and the Seller reserves the right to dispose of the Goods until payment is made in full for all the Goods in accordance with the terms of the Order. Until payment is made in full as above, the Buyer shall keep and store the Goods separately from any other goods in the possession of the Buyer so that the Goods can be easily identified. The Buyer is a bailee of the Goods and may sell the Goods to its customers by way of bona fide sale at full market value and in effecting such sale the Buyer shall be the agent of the Seller and has authority to sell the Goods for the account of the Seller. In the case of a sale of the Goods or any part of them to a third party, the Buyer shall stand in a fiduciary relationship to the Seller in respect of the proceeds of such sale and the Seller shall have the right to trace the proceeds of sale. The Buyer shall account separately for all proceeds of sale of the Goods and undertakes not to authorise any intermixing of such proceeds of sale in the Buyer’s general accounts. If payment by the Buyer is overdue, in whole or in part, the Seller may (without prejudice to any of its other rights) recover and/or resell the Goods or any part of them and may by its servants or agents enter upon the Buyer’s premises for that purpose. If any of the Goods are incorporated in or used as materials for other Goods before payment in full is made by the Buyer to the Seller, the legal property in the whole of such goods shall be and remain with the Seller until payment has been made in full by the Buyer under the terms of this clause, and all the Seller’s rights hereunder shall extend to such other goods. Notwithstanding any other agreement between the Seller and the Buyer with regard to terms of payment, payment for the Goods shall become immediately due in full upon the commencement of any act or proceeding involving the Buyer’s insolvency, including any arrangements made by the Buyer with its creditors or any judgement for debt given against the Buyer. 14. WarrantiesThe Seller warrants that:it has the right to sell the Goodsthe Goods are free from any charge or encumbrancethe Goods correspond to any description of the Goods supplied by the Seller to the Buyerthe Goods are of satisfactory qualitythe Goods are fit for purposethe Goods comply with laws, rules, regulations applicable to the marketing and sale of Goods in the UKThe Seller will promptly and in any event within 10 working days, fully respond to all reasonable enquiries and complaints by the Buyer relating to quality, performance and/or durability of the GoodsWithout prejudice to the Buyer’s rights and remedies, if the Goods do not comply with any warranty given by the Seller, the Buyer may with the prior agreement of the Seller return those Goods for either:a) A full refund of the price paid to the Seller for such Goodsb) Replacement Goodsc) A credit note in respect of the price of the Goods to be offset against future purchases from the SellerReturned Goods must be properly packed and returned to the Seller within a reasonable time after agreement by the Seller. Any Goods returned in contravention of this Clause will not be the subject of any credit or replacements, and the Buyer shall continue to be liable for payment of the Goods Except as stated above, all guarantees, warranties or conditions (including any conditions as to quality or fitness for any particular purpose) whether express or implied by statute, common law or otherwise, are hereby excluded and negated, save where such exclusion would infringe the provisions of the Unfair Contracts Terms Act, 1977 or the Sale of Goods Acts. 15. LiabilitiesNothing in the contract willLimit or exclude the liability of a party for death or personal injury resulting from negligenceLimit or exclude the liability of a party for fraud or fraudulent misrepresentation by that partyLimit or exclude any liability of a party under Section 12 of the Sale or Goods Act 1979 or Section 2 of the Supply of Goods and Services Act 1982Limit any liability of a party in any way that is not permitted under applicable law; orExclude any liability of a party that may not be excluded under applicable lawThe Seller will not be liablein respect of any consequential losses such as, but not limited to, loss of profits, income, revenuefor any loss of business, contracts or commercial opportunitiesfor any loss or damage to goodwill or reputationin respect of any loss or corruption of any data, database or softwarein respect of any special, indirect or consequential loss or damagefor any losses arising out of a Force Majeure event16. GeneralIf any provision of these Terms is determined by any court or other competent authority to be unlawful and/or unenforceable, the other provisions of the Terms will continue in effect. If any unlawful and/or unenforceable provision would be lawful or enforceable if part of it were deleted, that part shall be deemed to be deleted, and the rest of the provision will continue in effect.17. JurisdictionThe Order, together with these Terms, shall be governed by and construed in accordance with the laws of England and Wales and the courts of England will have exclusive jurisdiction to adjudicate any dispute arising whatsoever.Registered Office: Plasson UK Ltd, 37 Broadhurst Gardens, London NW6 3QT Company Registration No. 5835266

Terms and Conditions

67

terms and conditions

www.plasson.co.uk

Plasson UK Ltd. Plasson House, Albert Drive, Burgess Hill, West Sussex RH15 9TN.Tel: 01444 244446 | Fax: 01444 258683 | Email: [email protected]

Tel: 01444 244446Fax: 01444 258683

Email: [email protected]

Fittings & Accessories for PE Pipe - Plasson | Ne pushfit electrofusion valves metering repair...

Documents

Transcript of Fittings & Accessories for PE Pipe - Plasson | Ne pushfit electrofusion valves metering repair...