First Call for Papers - UPTannals.fih.upt.ro/pdf/Invitation IRMES 2017.pdf · First Call for Papers...
Transcript of First Call for Papers - UPTannals.fih.upt.ro/pdf/Invitation IRMES 2017.pdf · First Call for Papers...
First Call for Papers – 8
th International Scientific Conference IRMES 2017
Machine elements and systems in energy sector -
development of power production systems
Submit your abstracts by April 1st
, 2017 to www.irmes2017.ac.me
Organised by
http://adeko.omk.in.rs/
Faculty of Mechanical Engineering, University of
Belgrade, Serbia
Faculty of Mechanical Engineering, University of
Montenegro, Montenegro
Institute of Structural and Computational
Mechanics, Berlin Institute of Technology (TU
Berlin), Germany
Faculty of Mechanical Engineering, University of
Niš, Serbia
Faculty of Technical Sciences, University of Novi
Sad, Serbia
. Faculty of Engineering, University of Kragujevac
Serbia
Faculty of Mechanical and Civil Engineering in
Kraljevo, University of Kragujevac, Serbia
School of Mechanical Engineering, Aristotle
University of Thessaloniki, Greece
Faculty of Mechanical Engineering, Slovak
University of Technology in Bratislava, Slovakia
Faculty of Engineering, University Politehnica
Timisoara, Faculty of Engineering – Hunedoara,
Romania
Faculty of Mechanical Engineering, University of
Technology and Economics Budapest, Hungary
Faculty of Mechanical Engineering, University of
Ljubljana, Slovenia
Faculty of Mechanical Engineering, Technical
University of Sofia, Bulgaria
Faculty of Mechanical Engineering, University of
East Sarajevo, RS, Bosnia and Herzegovina
Faculty of Mechanical Engineering, University of
Banja Luka, RS, Bosnia and Herzegovina
Faculty of Mechanical Engineering, Ss. Cyril and
Methodius University in Skopje, FYROM
Technical Faculty Bitola, University St. Kliment
Ohridski in Bitola, FYROM
Faculty of Mechanical Engineering, University
Džemal Bijedić of Mostar, Bosnia and
Herzegovina
Faculty of Mechanical Engineering and
Computing, University of Mostar,
Bosnia and Herzegovina
"Logos Centar" College Mostar,
Bosnia and Herzegovina
Submit your abstracts!
Covering topics such as:
• Mechanical systems and elements
• Power and motion transmission systems
• Development of mechanical systems and
elements in energy industry
• New production technologies
• Education of mechanical engineers
Date and Venue
September 7th - 9th , 2017
Trebinje, Bosnia and Herzegovina
Official Website
www.irmes2017.ac.me
Balkan invites the WORLD
Host organizer - University of Montenegro
Faculty of Mechanical Engineering, Montenegro
Address: Džordža Vašingtona bb, 81000 Podgorica, Montenegro
Web: http://www.mf.ucg.ac.me
E-mail: [email protected]
- Co-organizers University of East Sarajevo
Partner organisations
Mission and vision
The IRMES Conference has a successful history, and a promising future – conditioned by the need
for international cooperation in research and development of machine elements and systems.
Since the first Conference (held in the year of 1995th – IRMES 1995) to the 7th Conference (IRMES
2011), organizers have gathered more than one thousand authors and participants, who have
presented more than 780 papers, reviewed and categorized as scientific and professional papers
published in the relevant proceedings.
IRMES Conference organizers – ADEKO association, wishes to help to the global engineering
community in development of solutions for real engineering challenges. Founded in 1973, by the
name ‘Yugoslavian Society for Machine Elements and Constructions’, ADEKO is a non-profit
professional organization that gathers numerous educational institutions from central and south-
eastern Europe and enables collaboration, knowledge sharing and skill development across
numerous engineering disciplines, especially in the fields of power and motion transmission
systems, 3D modelling and FEM analysis, rapid prototyping, product development and machine
design, while promoting the very important role of the engineer in the global society.
IRMES Conference mission is to serve global communities by advancing, disseminating and
applying engineering knowledge, and also to be the essential resource for mechanical engineers
and other technical professionals throughout the world.
IFToMM
International Federation for the
Promotion of Mechanism and
Machine Science
Production and Management Faculty at Trebinje
Address: Stepe Stepanovića bb, 89101 Trebinje,
Republika Srpska, Bosnia and Hercegovina
Web: http://fpmtrebinje.com/wp/
E-mail: [email protected]
Faculty of Mechanical Engineering
Address: Vuka Karadžića 30, 71123 Istočno
Sarajevo, Republika Srpska, Bosnia
and Hercegovina
Web: http://www.maf.ues.rs.ba/
E-mail: [email protected]
Trebinje
Municipality in Bosnia and
Herzegovina
Presidency
Prof. Dr.-Ing. Radivoje Mitrović, Serbia, President of the International Scientific Committee
Contact: [email protected]
Prof. Dr.-Ing. Radoslav Tomović, Montenegro, President of the International Programme
and Organizing Committee
Contact: [email protected]
Dipl.-Ing. Žarko Mišković, M.Sc., Serbia, Secretary of the Conference
Contact: [email protected]
International Scientific Committee
Prof. Dr.-Ing. Veniamin Goldfarb, Izhevsk State Technical
University, Russia
Prof. Dr.-Ing. Dragan Marinković, Technische Universität
Berlin, Germany
Prof. Dr.-Ing. Manfred Zehn, Technische Universität
Berlin, Germany
Prof. Dr.-Ing. Dragan Đurđanović, University of Texas at
Austin, USA
Prof. Dr.-Ing. Vlado Lubarda, University of California, San
Diego, USA
Prof. Dr.-Ing. Miki Hondžo, University of Minnesota, USA
Prof. Dr.-Ing. Victor E. Starzhinsky, Metal-Polymer
Research Institute of National Academy of Sciences of
Belarus, Belarus
Prof. Dr.-Ing. Aleksandar Subić, Swinburne University of
Technology, Melburn, Australia
Prof. Dr.-Ing. Pavan Kumar Kankar, Indian Institute of
Information Technology, Design and Manufacturing
Jabalpur, India
Prof. Dr.-Ing. Prof. Ling Zhou, College of Water
Conservancy and Hydropower Engineering, Hohai
Universtiy, China
Prof. Dr.-Ing. Miroslav Vereš, Slovak University of
Technology in Bratislava, Slovakia
Prof. Dr.-Ing. Mikael Möller, Luleå University of
Technology, Sweden
Prof. Dr.-Ing. Nikolai Balc, Technical University of Cluj-
Napoca, Romania
Prof. Dr.-Ing. Marian Borzan, Technical University of Cluj-
Napoca, Romania
Prof. Dr. Lucian Tudose, Department of Mechanical
System Engineering of the Technical University of Cluj-
Napoca, Romania
Prof. Dr.-Ing. Athanassios Mihailidis, Aristotle University of
Thessaloniki, Greece
Prof. Dr.-Ing. Vilmos Simon, Budapest University of
Technology and Economics, Hungary
Prof. Dr.-Ing. József Sárosi, Faculty of Engineering,
University of Szeged, Hungary
Prof. Dr.-Ing. Tamas Mankovits, Faculty of Engineering,
University of Debrecen, Hungary
Prof. Dr.-Ing. Ljubomir Dimitrov, Faculty of Mechanical
Engineering, Technical University of Sofia, Bulgaria
Prof. Dr.-Ing. Jože Duhovnik, Faculty of Mechanical
Engineering, University of Ljubljana, Slovenia
Prof. Dr.-Ing. Božidar Križan, Faculty of Technical Sciences,
University of Rijeka, Croatia
Prof. Dr.-Ing. Vladeta Radović, Faculty of Mechanical
Engineering, University of Montenegro, Montenegro
Prof. Dr.-Ing. Radoš Bulatović, Faculty of Mechanical
Engineering, University of Montenegro, Montenegro
Prof. Dr.-Ing. Radoslav Tomović, Faculty of Mechanical
Engineering, University of Montenegro, Montenegro
Prof. Dr.-Ing. Milorad Burić, Faculty of Mechanical
Engineering, University of Montenegro, Montenegro
Prof. Dr.-Ing. Igor Vušanović, Faculty of Mechanical
Engineering, University of Montenegro, Montenegro
Prof. Dr.-Ing. Bozidar Rosić, Faculty of Mechanical
Engineering at University of Belgrade, Serbia
Prof. Dr.-Ing. Milosav Ognjanović, Faculty of Mechanical
Engineering at University of Belgrade, Serbia
Prof. Dr.-Ing. Mileta Ristivojević, Faculty of Mechanical
Engineering at University of Belgrade, Serbia
Prof. Dr.-Ing. Mirko Blagojević, Faculty of Engineering,
University of Kragujevac. Serbia
Prof. Dr.-Ing. Blaža Stojanović, Faculty of Engineering,
University of Kragujevac. Serbia
Prof. Dr.-Ing. Nenad Marjanović, Faculty of Engineering,
University of Kragujevac. Serbia, Serbia
Prof. Dr.-Ing. Dragan Milčić, Faculty of Mechanical
Engineering, University of Niš, Serbia
Prof. Dr.-Ing. Dušan Stamenković, Faculty of Mechanical
Engineering, University of Niš, Serbia
Prof. Dr.-Ing. Vojislav Miltenović, Faculty of Mechanical
Engineering, University of Niš, Serbia
Prof. Dr.-Ing. Sinisa Kuzmanović, Faculty of Technical
Sciences, University of Novi Sad, Serbia
Prof. Dr.-Ing. Biljana Marković, Faculty of Mechanical
Engineering, University of East Sarajevo
Prof. Dr.-Ing. Remzo Dedić, Faculty of Mechanical
Engineering and Computing, University of Mostar
International Programme Committee Prof. Dr.-Ing. Radivoje Mitrović, Serbia
Prof. Dr.-Ing. Safet Isić, Bosnia and Hercegovina
Prof. Dr.-Ing. Ljubomir Dimitrov, Bulgaria
Prof. Dr.-Ing. Biljana Marković, Bosnia and
Herzegovina
Doc. Dr.-Ing. Milan Tica, Bosnia and Herzegovina
Prof. Dr.-Ing. Adisa Vučina, Bosnia and Herzegovina
Prof. Dr.-Ing. Uroš Karadžić, Montenegro
Prof. Dr.-Ing. Janko Jovanović, Montenegro
Prof. Dr.-Ing. Lozica Ivanović, Serbia
Prof. Dr.-Ing. Blaža Stojanović, Serbia
Doc. Dr.-Ing. Milan Banić, Serbia
Doc. Dr.-Ing. Milan Rackov, Serbia
Doc. Dr.-Ing. Radoje Vujadinović, Montenegro
Dipl.-Ing. Žarko Mišković, M.Sc., Serbia
Organizing Committee Prof. Dr.-Ing. Igor Vušanović, Montenegro
Prof. Dr.-Ing. Ranko Antunović, Bosnia and
Herzegovina
Prof. Dr. Dušan Jokanović, Bosnia and Herzegovina
Prof. Dr.-Ing. Janko Jovanović, Montenegro
Doc. Dr.-Ing. Zoran Stamenić, Serbia
Doc. Dr.-Ing. Aleksandar Košarac, Bosnia and
Herzegovina
Dipl.-Ing. Luka Petrović, Bosnia and Herzegovina
Dipl.-Ing. Ilija Tamindžija, Bosnia and Herzegovina
Dipl.-Ing. Boro Vujučić, Mr, Bosnia and Herzegovina
Ing. Vidosava Vilotijević, Montenegro
Marko Mumović, Montenegro
Aleksandar Tomović, Montenegro
Media partners - Journals
http://thermalscience.vinca.rs/
ISSN 2334-7163 (online edition)
ISSN 0354-9836 (printed edition)
IF: 0.939 (Thomson Reuters SCI)
http://facta.junis.ni.ac.rs/
ISSN 2335-0164 (online edition)
ISSN 0354-2025 (printed edition)
http://www.mdesign.ftn.uns.ac.rs/
ISSN 2406-0666 (online edition)
ISSN 1821-1259 (printed edition)
http://www.aeletters.com/
journal-information/
ISSN 2466-4847 (online)
ISSN 2466-4677 (printed)
http://www.mech-sci.net/
ISSN 2191-916X (online)
ISSN 2191-9151 (printed)
IF: 1.2 (Thomson Reuters SCI)
http://www.mas.bg.ac.rs/istrazivanje/fme/start
ISSN: 1451-2092 (printed edition)
ISSN: 2406-128X (online edition)
SELECTED CONFERENCE PAPERS WILL BE PUBLISHED IN THE LISTED JOURNALS – AFTER
ADDITIONAL REVIEW AND CONTENT IMPROVEMENT
Topics 1. Mechanical systems and elements
1.1. Modelling and simulation
1.2. Loading and stress conditions
1.3. Mechanical systems noise and vibrations
1.4. Modern materials, thermal treatment, coatings and
fracture
1.5. Mechanical systems monitoring and maintenance
1.6. Testing of mechanical systems
1.7. Safety, quality and reliability
2. Power and motion transmission systems (gears,
shafts, bearings, couplings, idlers...)
2.1. Transmissions for energy systems, e.g. power plants,
wind generators, water turbines etc.
2.2. Application of transmission systems in the context of
Industry 4.0
2.3. Optimized transmission systems design (cylindrical,
bevel and worm gears, beveloids, rolling bearings,
idlers) – with improved strength, efficiency and/or
reduced noise and vibration
2.4. Transmission systems and elements experimental
testing - new testing methods and/or procedures for
assessment of lifetime, efficiency and noise behaviour
2.5. Transmission systems and elements condition
monitoring and predictive maintenance
3. Development of mechanical systems and
elements in energy industry
3.1. Strategic planning and development of energy
industry and energetic policy
3.2. Modern mechanical systems for heat and electric
power production
3.3. Modelling and simulation of power production
mechanical systems and elements
3.4. Environmental protection, energy efficiency and
optimisation of power plants - green energy,
renewable energy
3.5. Latest researches, technical solutions and innovations
in power production mechanical systems and
elements
3.6. Hydro and Thermo Power Plants and Equipment
4. New production technologies
4.1. Advanced Technologies and their applications in
mechanical engineering and other fields of technical
science
4.2. Intelligent manufacturing systems
4.3. Robotics and mechatronics
4.4. Rapid prototyping and additive manufacturing –
development and application
4.5. Future rapid prototyping technologies – context,
approach and predictions
5. Education of mechanical engineers in the context
of Industry 4.0
5.1. Current state of mechanical engineers education in
Western Balkan countries
5.2. Comparison of systems of education in EU and
Western Balkan countries
5.3. Analysis of mechanical engineers education demands
and outcomes according to the Industry 4.0
5.4. Ways to improve education of mechanical engineers
in Western Balkan region regarding to the 21st
century market demands
Students section
A special section of IRMES 2017 is devoted to the bachelor and master degree students:
competition in 3D modelling and product development.
Subject of the competition is precisely defined at conference website www.irmes2017.ac.me.
Please follow the instructions, especially regarding to the formats of files which should be sent to
corresponding person named bellow. The students’ projects will be accessed by the following
criteria:
1. Overall look and design
2. Functionality – taking into account the intended use of the developed model
3. Cost and production effectiveness
Please, send your projects to the Prof. Dr.-Ing Mirko Blagojević: [email protected] – before the July
31st, 2017. Short description of the project should be also provided (max. 2 pages in *.doc or
*.pdf format).
BEST STUDENT’S PROJECTS WILL BE AWARDED WITH CERTIFICATES AND VALUABLE PRIZES
– ON SITE, DURING THE CONFERENCE!
Conference languages
The official language of the Conference is English
Abstract submission
The abstract submission should be completed using online system, according to the instructions
published on IRMES 2017 website: www.irmes2017.ac.me
Abstract must be in accordance with the topics listed on the previous page
Authors and papers
The authors of accepted abstracts will write the full paper
according to the instructions and template (MS Word) provided
on the Conference website, up to 6 pages
Each paper is reviewed anonymously by two reviewers from
different states (providing independent and international review)
The reviewed paper is categorized as a scientific paper (with a scientific paper classification) or a
professional paper
All papers will have an assigned UDC code
Hardcopy Book of Conference proceedings will be published with appropriate ISBN number
CD Conference Proceedings will be also published containing all accepted papers (ISBN CD, pdf)
Selected papers will be published in chosen scientific journals (only in English language) – listed
on the page four of this Call
At the Conference, all papers will be presented electronically (MS Power Point – except poster
presentations), according to the instructions published on the conference website
Registration fee
Registration fee for the authors and co-authors: 100 € (only one registration per paper is
mandatory)
Registration fee for the participants of the Conference who are not authors: 130 €
Important dates
February 15th, 2017 – First Call for Papers
April 1st, 2017 – Deadline for Abstracts submission
April 30th, 2017 – First turn of Abstracts acceptance
May 1st, 2017 – Second Call for Papers
June 1st, 2017 – Abstracts submission and
acceptance (second turn)
July 15th, 2017 – Deadline for Full Papers submission
July 31st, 2017 – Deadline for students’
section (competition) application
August 15th, 2017 – Full Papers acceptance
September 1st, 2017 – Last date for Participants fee payment
September 7th, 2017 – Beginning of the conference
QUESTIONS? Contact us:
Conference location and date
City of Trebinje, Republic of Srpska, Bosnia and Herzegovina
September 7-9, 2017. – Thursday, Friday, Saturday
Accommodation
Please, make a reservation according to the instructions on the Conference website!
Tourist opportunities
Trebinje is the southernmost city in Republic of Srpska (Bosnia and Herzegovina) and its located
only 28km from the famous city of Dubrovnik (Adriatic sea coast), where numerous beach resorts
and tourist attractions could be find. The Old Town of Trebinje was established in the 18th century
and soon developed into a trading & crafts centre named Kastel. Also, nearby is Andricgrad,
bohemian town, promoted by the famous movie director (E. Kusturica) – with regular cultural
manifestations and movie and music festivals. More on:
http://trebinjeturizam.com/en/contact/Tourist-organization-of-Trebinje.php
Closest airports:
Ćilipi 40 km
Tivat 55 km
Podgorica 120 km