Firetrace Brochure - English Rev 5-05
-
Upload
reliefengineer -
Category
Documents
-
view
216 -
download
2
Transcript of Firetrace Brochure - English Rev 5-05
S I T E
S P E C I F I C
P R O T E C T I N G
Y O U R
M I C R O - E N V I R O N M E N T
®
D2-090301-Firetrace-Bro.Rev. 9/4/02 1:27 PM Page 2
THE FIRETRACE® ADVANTAGE
• Suppresses fire within seconds to minimize damage
• Flexible, narrow tubing is particularly applicable in small spaces
• Always activates where the most heat is detected
• Can be installed virtually anywhere, especially in hard-to-reach areas
• No electricity required; performs even during electrical failure
• Variety of available suppressants including FM-200®, dry chemical
powders, CO2, water and foam
• Cost-effective and practical
• Quick and simple installation
The Firetrace Detection Tubing is the “heart” of our system.
UNIQUE FIRETRACE ADVANTAGES:
®
The effectiveness of a Firetrace system comes from our proprietary, polymer tubing that
will rupture when exposed to a flame. This specialized Firetrace Detection Tubing combines
leak resistance, flexibility, durability and precise temperature sensitivity, allowing it to react quickly
when the heat from a fire is present. Our Detection Tubing connects to one of our custom engineered valves
and a Firetrace cylinder that contains the best fire suppression agent for the particular hazard.
Designed for simple installation, often very near the source of a potential fire, Firetrace is a self-activating
suppression system that reliably suppresses fires in seconds. We provide a low maintenance, cost-effective
solution to the problem of "micro-environment" protection. Micro-environment applications are typically between
250 — 300 cubic feet (7.08 — 8.50 cubic meters). Firetrace requires no electricity or external power source,
so it will provide its vital fire protection even in the event of power failure. Plus, our systems can be configured
to turn off power or fuel supplies to equipment or machinery.
D2-090301-Firetrace-Bro.Rev. 9/4/02 1:28 PM Page 3
DIRECT RELEASE – LOW PRESSURE SYSTEMS
The Direct Low Pressure (DLP) System utilizes the Firetrace Detection Tubing as both the fire
detection device and the fire suppressant delivery system. The portion of the Tube nearest the
hottest point of the fire ruptures, forming an effective discharge "nozzle". The pressure drop
in the Tube releases the entire contents of the cylinder through this nozzle.ole and the fire is
quickly and effectively suppressed.
INDIRECT RELEASE – LOW PRESSURE SYSTEMS
With the Indirect Low Pressure (ILP) System, the Firetrace Detection Tubing is used only as a
detection device. The fire suppression agent is delivered via copper tubing, stainless steel tubing
or braided hose. Once the tube "bursts", the suppressant is discharged through strategically
placed nozzles within the protected enclosure.
HIGH PRESSURE SYSTEMSThis line of Firetrace products, available in both direct and indirect systems, allows for
delivery of high pressure suppressants such as carbon dioxide, argon or similar agents.
DIRECT DELIVERY
INDIRECT DELIVERY
Technical & Industrial
Enclosed automated millingmachines; EDM machines; robotic welding machines; plastic injection moldingmachines
Industrial Equipment
Forklifts; plant machineryengine protection; paper pulping machines
Commercial Fleet& Alternative FuelVehicles
Mass transit; police authorityriot vehicles; military personneltransport
Electrical Controls& Cabinets
PLC & process automation control cabinets; critical dataprocessing equipment; UPS cabinets; medical equipment;switchgears
Fume Cabinets
Chemical storage; research anddevelopment labs; chemical production; pharmaceutical labs
Isolated IndustrialInstallations
Drilling rig controls; radio & TVtransmitters; railroad controls;cellular telephone sites
FIRETRACE AUTOMATIC FIRE SUPPRESSION SYSTEMS
D2-090301-Firetrace-Bro.Rev. 9/4/02 1:28 PM Page 4
Firetrace International15678 N. Greenway-Hayden Lp. Ste 103Scottsdale, AZ 85260 USA
www.f iretrace.com
Our worldwide network of authorized Firetrace distributors proposes, installs and supports Firetrace systems to reliably and
effectively protect your assets. The only limits to our micro-environment protection are professional fire protection
expertise and your imagination!
Distributor:
• ELECTRICAL CONTROL PANELS
• LABORATORY FUME/EXHAUST CABINETS
• EDM & CNC MACHINING CENTERS
• UPS UNITS
• COMPUTER/DATA STORAGE CABINETS
• PUMP ENCLOSURES
• TRANSFORMER CABINETS
• FLAMMABLE CHEMICALS STORAGE CABINETS
• GENERATOR ENCLOSURES
• WIND TURBINES
Some examples of where Firetrace micro-environment protection has been effectively installed include:
Over 25,000 Firetrace systems are already silently protectingmicro-environments in various locations around the world!
Visit the Firetrace Web site often to learn more about the unique Firetrace technology and the many applications where it’s being used.
®
Tel: (480) 607.1218 Toll Free: (866) 607.1218Fax: (480) 315.1316
E-mail: [email protected]
Firetrace has more than 20 international approvals and listings including:
Approvals and listings vary by system type and agent.
MEA pending
D2-090301-Firetrace-Bro.Rev. 9/5/02 2:57 PM Page 1