FIREFLY FLOPPYFLEX + FLOPPYFLEX DIGITALpub.tmb.com/FloppyFlex/pdf/FloppyFlex-Manual.pdfFirefly...
Transcript of FIREFLY FLOPPYFLEX + FLOPPYFLEX DIGITALpub.tmb.com/FloppyFlex/pdf/FloppyFlex-Manual.pdfFirefly...
FIREFLY FLOPPYFLEX + FLOPPYFLEX DIGITAL
USER MANUAL1.8
EXCLUSIVE DISTRIBUTION – THE AMERICAS, EUROPE, AND ASIA
TMB 24/7 Technical Support
US/Canada: +1 818.794.1286
Toll Free: 1 877.862.3833 (877.TMB.DUDE)
UK: +44 (0)20.8574.9739
Toll Free: 0800.652.5418
E-mail: [email protected]
1ROAD PROVEN TECHNOLOGY | TMB
Firefly FloppyFlex and FloppyFlex Digital are world class professional grade, flexible
IP68*, IP67 and IP40 LED “neon”. It’s the perfect replacement for glass neon, easy to
use, long lasting & durable. Suitable for many projects and installations including indoor,
outdoor, signage & architectural. Single Color, RGB, Digital RGB, Digital RGBW and
Dynamic White with side-to-side (STS) and front-to-back (FTB) bend options.
*IP68 Rated configurations available by special order
Firefly FloppyFlex
- Easy to use and install.
- Wide range of accessories for joining, terminating, mounting, and powering.
- Available in RGB, White (2100, 2500, 2700, 3000, 3500, 4000, 4500, 5000, 5700,
6500K) Red, Green, Blue, Yellow, Amber, and Orange
- Large 270°, Small and Flat 160° STS bend; Flat 160° FTB bend versions.
- Custom colors available.
Firefly FloppyFlex Digital
- Smooth soft edges, seamless color blending.
- Auto-addressing allows for quick setup and patching.
- Large 270° and Small 160° STS bend; Flat 160° FTB bend versions.
- Available in Digital RGB and RGBW, with multi-pixel control.
- Unlimited and unprecedented possibilities.
FlameResistant
UVResistant
SolventsResistant
SaltwaterResistant
IP68 OptionsAvailable
IK08Protection
2ROAD PROVEN TECHNOLOGY | TMB
CONTENTS
1. PRODUCT SPECIFICATIONS 3
2. CARE AND HANDLING 5
3. CUTTING INSTRUCTIONS 8
4. TERMINATING INSTRUCTIONS 9
5. ALUMINUM PROFILE OPTIONS 15
6. LEAD-IN AND LENGTHS 17
7. POWER MATRIX 18
8. POWERING FLOPPYFLEX 20
9. FLOPPYDRIVE OPTIONS 21
10. BASIC WIRING DIAGRAMS 23
11. APPENDIX 25
3ROAD PROVEN TECHNOLOGY | TMB
1. PRODUCT SPECIFICATIONS
270° Large Profile For full details and specs, please refer to the product’s Spec Sheet.
Fixture Color Cut Length Voltage Operating Temperature Wiring Control
FloppyFlex Single Color
2100K, 2500K, 3000K, 3500K, 4000K, 5000K, 5700K,Green, Blue, Yellow, Orange
83.3 mm24V DC
-40°F to 131°F (-40°C to 55°C)
2-WireMagneticLow Voltage24V
Red 125 mm
FloppyFlexRGB
RGB 100 mm 24V DC-40°F to 131°F (-40°C to 55°C)
4-Wire FloppyDrive
FloppyFlex DigitalRGB
RGB 125 mm 24V DC32°F to 113°F(0°C to 45°C)
3-Wire FloppyDrive
FloppyFlex DigitalRGBW
RGBW 125 mm 24V DC32°F to 113°F (0°C to 45°C)
3-Wire FloppyDrive
FloppyFlex Dynamic White
2500-5000K 83.3 mm 24V DC32°F to 113°F (0°C to 45°C)
3-Wire FloppyDrive
160° Small Profile For full details and specs, please refer to the product’s Spec Sheet.
Fixture Color Cut Length Voltage Operating Temperature Wiring Control
FloppyFlex Single Color
2100K, 2500K, 2700K, 3000K, 3500K, 4000K, 4500K, 5000K5700K
100 mm
24V DC-40°F to 131°F (-40°C to 55°C)
2-WireMagneticLow Voltage24VGreen, Blue, Yellow, Orange 83.3 mm
Red, Amber 125 mm
FloppyFlexRGB
RGB 100 mm 24V DC-40°F to 131°F (-40°C to 55°C)
4-Wire FloppyDrive
FloppyFlex DigitalRGB
RGB 125 mm 24V DC32°F to 113°F(0°C to 45°C)
3-Wire FloppyDrive
FloppyFlex DigitalRGBW
RGBW 125 mm 24V DC32°F to 113°F (0°C to 45°C)
3-Wire FloppyDrive
FloppyFlex Dynamic White
2500K - 5000K 100 mm 24V DC32°F to 113°F (0°C to 45°C)
3-Wire FloppyDrive
4.72”
(120mm)
4.72”
(120mm)
4ROAD PROVEN TECHNOLOGY | TMB
160° Flat (FTB) Profile For full details and specs, please refer to the product’s Spec Sheet.
Fixture Color Cut Length Voltage Operating Temperature Wiring Control
FloppyFlex Single Color
2500K, 2700K, 3000K, 3500K, 4000K, 4500K, 5000K, 5700K,6500KGreen, Blue
55.6 mm24V DC
-40°F to 131°F (-40°C to 55°C)
2-WireMagneticLow Voltage24V
Red, Amber 83.3 mm
FloppyFlexRGB
RGB 100 mm 24V DC-40°F to 131°F (-40°C to 55°C)
4-Wire FloppyDrive
FloppyFlex DigitalRGB
RGB 83.3 mm 24V DC32°F to 113°F(0°C to 45°C)
3-Wire FloppyDrive
FloppyFlex DigitalRGBW
RGBW 83.3 mm 24V DC32°F to 113°F (0°C to 45°C)
3-Wire FloppyDrive
FloppyFlex Dynamic White
2500K-5000K 83.3 mm 24V DC32°F to 113°F (0°C to 45°C)
3-Wire FloppyDrive
160° Flat (STS) Profile For full details and specs, please refer to the product’s Spec Sheet.
Fixture Color Cut Length Voltage Operating Temperature Wiring Control
FloppyFlex Single Color
2500K, 2700K, 3000K, 3500K, 4000K, 4500K, 5000K, 5700K,6500KBlue, Green
55.6 mm24V DC
-40°F to 131°F (-40°C to 55°C)
2-WireMagneticLow Voltage24V
Amber, Red 83.3 mm
11.8”
(300mm)
11.8”
(300mm)
5ROAD PROVEN TECHNOLOGY | TMB
2. CARE AND HANDLING
Firefly FloppyFlex LED neon contains electronic components (circuit boards) and LEDs.
While the flexible coating enhances durability, FloppyFlex does require proper care and
handling. Treated correctly, per the guidelines below, FloppyFlex will provide many years of
reliable service and beautiful colors.
FloppyFlex is available in four versions, descriptive of the lens or illuminated surface:
270˚ Large, 160˚ Small, 160˚ Flat (FTB), 160˚ Flat (STS). The handling and installation rules
below apply to all four:
1. Never twist FloppyFlex. If your application requires ongoing unreeling and
reeling, we suggest the FloppyFlex be stored on a rotating reel or drum. We do not
recommend hand-coiling as you would do with a cable.
2. Avoid shock or impact when installing. NEVER use a hammer or other
implement to force into place by striking or pounding. Never run over with a fork-lift
or scene-cart.
3. Bend Large, Small, and Flat (STS) FloppyFlex Side-to-Side (STS) only, i.e.
“side” bending with LED lens facing in one direction.
6ROAD PROVEN TECHNOLOGY | TMB
4. Bend Flat FloppyFlex Front-to-Back (FTB), i.e. front/back bending with lens
surface forming convex or concave arc of a circle.
5. Observe the minimum bending diameter for each product:
- Large and Small domed minimum bending diameter: 4.72” (120mm)
- Flat minimum bending diameter: 11.8” (300mm)
6. Do not hang or suspend in the air. FloppyFlex must be mounted on a surface or
secure in its designated u-channel (aluminum profile).
7. Do not puncture FloppyFlex with staples, nails, screws, or any other sharp objects.
This will void the warranty. Also, always check for sharp, protruding screws,
bolts, or other foreign objects on the base of aluminum profile or other track before
installing FloppyFlex.
7ROAD PROVEN TECHNOLOGY | TMB
8. Always use the appropriate FloppyFlex u-channel profile (standard or self-locking)
designed for the correct product (Large, Small, or Flat). The self-locking u-channel
is more durable, and is recommended for portable applications.
9. When mounting FloppyFlex LED neon in a profile, always press into the channel
in one direction, from one end to the other. Never press the LED strip from
both ends to “meet in the middle.”
10. Do not put excessive stress on the power input cable. Kinking or excessive force
may sever the electrical connection or remove the connector from the fixture.
11. Do not treat FloppyFlex like a garden hose or extension lead. Always coil Floppyflex
on a flat surface (e.g. floor, table, road case), then put it back in the box with
tape to hold the coil together.
8ROAD PROVEN TECHNOLOGY | TMB
3. CUTTING FLOPPYFLEX
MINI TOOL KIT
An optional Firefly Mini Tool kit is available with cutter, insertion spreader, and grippers.
The larger of the two spreaders are used for large dome, small dome, and flat FloppyFlex
strips. The grippers are used only for the Flat Clasp power and end caps, and not for
EZ-Connect power feed and end caps. We recommend using tools included in the Mini
Tool Kit for optimum results and reduced risk of damage to the product. Pictured below is
the complete kit plus images of the FloppyFlex cutter, closed and opened.
CUTTING INSTRUCTIONS
Cut strip for a flat, smooth cross-section. Be sure to make clean, straight cuts at 90
degrees (perpendicular) to the length of FloppyFlex. Cut with the PCB at the base of the
cutters – do not cut from the illumination side first. ONLY cut on the neon strip cutting
marks (small lines printed on the LED.)
Grippers Cutter
InsertionSpreaders
Cutting Line
9ROAD PROVEN TECHNOLOGY | TMB
4. TERMINATING FLOPPYFLEX
After cutting, note which numbered side is visible, “01” or “02”. This number determines
which style input connector must be used, 01 or 02. The input connector number must
match the printed number at the end of the FloppyFlex to which it connects.
Use the appropriate insertion spreader to separate the electrode from the PVC insulating
strip. Separating them makes for easier identification and access to the copper conduc-
tors for inserting the power feed pins (connector).
IMPORTANT: Do not insert the spreader too deep, not more than 10 mm.
02 End
PCB PVC Strip
Spreader Placement
01 End
Inserting the spreader into the front side of the PCB will damage the fixture.
10ROAD PROVEN TECHNOLOGY | TMB
Once the spreader is removed, choose the appropriate power feed connector (“01” or
“02”) for insertion into the end you will be terminating, splicing, or jumping with. End Caps
insulate the end of a piece of FloppyFlex from contact with another surface.
DO NOT insert the pins into the front side of the PCB.
DO NOT split the pins around the PCB
EZ-Connect Connection
DO NOT insert the pins into the front side of the PCB.
DO NOT split the pins around the PCB
EZ-Connect End Cap
11ROAD PROVEN TECHNOLOGY | TMB
Power Feed Termination Example – EZ-Connect
IMPORTANT! The Plastic Sleeve contains a waterproof lining. Once installed over FloppyFlex, it cannot be removed and reused. If reused, it will not be waterproof and FloppyFlex used outdoors will malfunction.
Slide on the plastic sleeve as instructed on the sleeve. Direction of arrows must be followed to ensure IP67 rating remains intact.
NOTE: The number on the FloppyFlex end must match the number on the EZ-Connect.
Gently insert the power connector with a straight motion into the gap created between PCB and colored PVC strip. Maintain proper alignment to avoid damaging the PCB.
NOTE: The fixture can now be powered to test contact between pins and PCB
Slide on the silver metal locking frame, taking care that edge of the frame aligns exactly with clean edge of FloppyFlex. Improper alignment may result in the IP67 rating being compromised. Water ingress failure due to incorrect assembly is not covered by warranty.
STEP 1: PLASTIC SLEEVE
STEP 3: ESTABLISH CONNECTION STEP 4: METAL FRAME
Gently insert the spreader between copper PCB LED tape and hard green, black, or white PVC strip and spread gap in a vertical direction. Do this gently to avoid damage.
NOTE: The spreader must be inserted properly or internal PCB may be damaged.
STEP 2: INSERT SPREADER
Hard PVC Strip
NOTE: The strip will be green, black, or white.
Insert spreader gently into gap
LED tape PCB with copper strips to make contact with power connector
Slide metal locking frame on evenly to the neon strip, making sure it fits snugly against the base of the FloppyFlex.
Metal lip protrudes
Align clip precisely to edge of LED.This step is critical to maintain the IP67 rating
12ROAD PROVEN TECHNOLOGY | TMB
Power Feed Termination Example – EZ-Connect Cont.
Slip on the metal locking support frame until it “clicks” into place. Alignment of this frame is important, the “U” cutout in the frame must face toward the connector side.
Slide on the clear plastic sleeve in the direction of the connector until it “clicks” into place. Assembly is now complete.
Enjoy your Firefly FloppyFlex!For sales and support log onto www.tmb.com
STEP 5: METAL SUPPORT FRAME STEP 6: PLASTIC SLEEVE
13ROAD PROVEN TECHNOLOGY | TMB
Power Feed Termination Example – IP40 (Available by special order only)
14ROAD PROVEN TECHNOLOGY | TMB
Power Feed Termination Example – IP67 Screw Connector(Available by special order only)
15ROAD PROVEN TECHNOLOGY | TMB
5. ALUMINUM PROFILE OPTIONS
Compatible with FloppyFlex Flat
Compatible with FloppyFlex Large and Small
self-locking aluminum profile
standard aluminum profile
16ROAD PROVEN TECHNOLOGY | TMB
1. Standard aluminum profiles on surfaces in either position or facing upright.
2. Self-locking aluminum profiles can be surface-mounted as above PLUS
facing downward, oblique angles, and vertically.
Note: FloppyFlex aluminum profiles come with pre-drilled screw holes for mounting on surfaces.
They can also be re-drilled for mounting screws as needed.
Important: Screw head dimensions (H x Dia.) must not exceed the following specifications
Max. screw head height x diameter
LED Strip Profile Standard Self-locking
Large and Small Dome0.09 x 0.31”(2.2 x 8mm)
0.1 x 0.4”(2.6 x 10mm)
Flat0.09 x 0.31”(2.2 x 8mm)
0.09 x 0.5”(2.4 x 12.9mm)
17ROAD PROVEN TECHNOLOGY | TMB
6. Lead-In Lengths
Watts 22AWG/ 0.34mm2 18AWG/0.82mm2 16AWG/1 .38mm2 14AWG/2.07mm2 12AWG/3.29mm2 10AWG/5.26mm2
10W 36m 100m 140m 240m 400m 600m
20W 18m 50m 70m 120m 200m 300m
30W 12m 30m 45m 80m 130m 200m
40W 8m 22m 35m 60m 95m 140m
50W 6m 18m 28m 48m 75m 105m
60W 5m 15m 22m 36m 60m 88m
70W - 12m 18m 30m 50m 72m
80W - 10m 14m 24m 40m 58m
90W - 7m 10m 18m 30m 45m
100W - 5m 7m 12m 22m 32m
110W - 3m 5m 8m 15m 22m
120W - 2m 3m 5m 8m 12m
Note: The cable length does not include the power connector cable.
Note: FloppyFlex Digital RGB and FloppyFlex Digital RGBW maximum lead-in length 10m with 18AWG
18ROAD PROVEN TECHNOLOGY | TMB
7. Power Matrix
270° Large Profile Lumen/m Power/m Max Length Molded Max Length DIY
Red >140lm 7.2W 15m 15m
Green >280lm 12W 10m 10m
Blue >40lm 12W 10m 10m
Yellow >260lm 12W 10m 10m
Orange >80lm 12W 15m 15m
2100K >340lm 12W 10m 10m
2500K >340lm 12W 10m 10m
3000K >340lm 12W 10m 10m
3500K >380lm 12W 10m 10m
4000K >380lm 12W 10m 10m
5000K >380lm 12W 10m 10m
5700K >380lm 12W 10m 10m
RGB >130lm 12W 7.5m 10m
DIG RGB >115lm 12W 15m 15m
DIG RGBW >110lm 15W 10m 10m
160° Small Profile Lumen/m Power/m Max Length Molded Max Length DIY
Red >100lm 7.2W 15m 15m
Green >280lm 12W 10m 10m
Blue >35lm 12W 10m 10m
Yellow >200lm 12W 10m 10m
Amber >110lm 7.2W 15m 15m
Orange >150lm 12W 10m 10m
2100K >260lm 12W 10m 10m
2500K >260lm 12W 10m 10m
2700K >260lm 12W 10m 10m
3000K >260lm 12W 10m 10m
3500K >300lm 12W 10m 10m
4000K >300lm 12W 10m 10m
4500K >300lm 12W 10m 10m
5000K >380lm 12W 10m 10m
5700K >300lm 12W 10m 10m
RGB >110lm 12W 7.5m 10m
DIG RGB >110lm 12W 15m 15m
DIG RGBW >90lm (@2700K) 15W 10m 10m
Dynamic White >200lm (@3500K) 10W 15m 15m
19ROAD PROVEN TECHNOLOGY | TMB
160° Flat (FTB) Profile Lumen/m Power/m Max Length Molded Max Length DIY
Red >170lm 7.2W 10m 10m
Green >550lm 12W 10m 10m
Blue >85lm 12W 10m 10m
Amber >170lm 7.2W 10m 10m
2500K >420lm 12W 10m 10m
2700K >420lm 12W 10m 10m
3000K >420lm 12W 10m 10m
3500K >480lm 12W 10m 10m
4000K >480lm 12W 10m 10m
4500K >480lm 12W 10m 10m
5000K >480lm 12W 10m 10m
5700K >450lm 12W 10m 10m
6500K >450lm 12W 10m 10m
RGB >318lm 12W 7.5m -
DIG RGB >392lm 16.5W 10m -
DIG RGBW >220lm 22W 10m -
160° Flat (STS) Profile Lumen/m Power/m Max Length Molded Max Length DIY
Red >170lm 7.2W 10m 10m
Green >550lm 12W 10m 10m
Blue >85lm 12W 10m 10m
Amber >170lm 7.2W 10m 10m
2500K >420lm 12W 10m 10m
2700K >420lm 12W 10m 10m
3000K >420lm 12W 10m 10m
3500K >480lm 12W 10m 10m
4000K >480lm 12W 10m 10m
4500K >480lm 12W 10m 10m
5000K >480lm 12W 10m 10m
5700K >450lm 12W 10m 10m
6500K >450lm 12W 10m 10m
20ROAD PROVEN TECHNOLOGY | TMB
8. Powering FloppyFlex Conductor Single Color 24V RGB and RGBW Digital RGB 24V
Red Positive “+” Terminal Positive “+” or “VCC” Terminal Red “R” Terminal
Green Green “G” Terminal
Blue Blue “B” Terminal
Yellow Clock/Data/Signal “S” Terminal Positive “+” or “VCC” Terminal
Black Negative “-” Terminal Negative “-” Terminal
21ROAD PROVEN TECHNOLOGY | TMB
9. FloppyDrive Options
Installation - Single Color, RGB, Digital RGB, Digital RGBW
ProPlex FloppyDrive DIN Rail
ProPlex FloppyDrive IP65 Portable ProPlex FloppyDrive Digital IP65 Portable
• Professional grade DMX control for RGB LED Tapes, Neons, and other low voltage systems
• Designed for Portable outdoor applications. 12V and 24V versions available.
• Addressing, monitoring and reporting of all functions, via RDM
• DMX “pixel” control for RGB/RGBW FloppyFlex Digital
• One output drives up to 15m of FloppyFlex Digital *
• Designed for Potable outdoor applications
• Addressing, monitoring and reporting of all functions, via RDM
• DMX “pixel” control for RGB/RGBW FloppyFlex Digital
• One output drives up to 15m of FloppyFlex Digital *
• Addressing, monitoring and reporting of all functions, via RDM
• Dimming and control for 12V or 24V LED Tapes, Neons, and other low voltage systems
• Multiple versions available: FloppyDrive 2x2 (single-color); 3x2 (Dynamic White); 4x2 (RGB); and 5x2 (RGBW/A)
• Addressing, monitoring and reporting of all functions, via RDM
ProPlex FloppyDrive Digital DIN Rail
22ROAD PROVEN TECHNOLOGY | TMB
Portable - Single Color, RGB, Digital RGB, Digital RGBW
ProPlex FloppyDrive PortableMount
• DMX control for 12V or 24V LED Tapes, Neons, and other low voltage systems
• Multiple versions available: FloppyDrive 2x2 (single-color); 3x2 (Dynamic White); 4x2 (RGB); and 5x2 (RGBW/A)
• Two outputs drive up to 10m of FloppyFlex each
• Addressing, monitoring and reporting of all functions via RDM
• Truss or desk mount. Rack mount with optional ProPlex RackMount Kit
* Exceptions apply. Consult FloppyDrive operation manual or contact TMB Tech Support
• DMX “pixel” control for RGB/RGBW FloppyFlex Digital
• One output drives up to 15m of FloppyFlex Digital *
• Addressing, monitoring and reporting of all functions, via RDM
• Truss or desk mount. Rack mount with optional ProPlex RackMount Kit
ProPlex FloppyDrive Digital PortableMount
PICTURE PENDING
23ROAD PROVEN TECHNOLOGY | TMB
10. Wiring Diagrams
DM
X D
evic
e
COMM
DATA-
+24
GND
DATA+
SIGNAL
0102
Flop
pyFl
ex D
igita
l (R
GB) Fi
refly
Flo
ppyF
lex
Dig
ital
(DIN
) Wiri
ng D
iagr
am
Dat
e: 8
Aug
ust 2
018
+ +
- -
+-
Pow
er S
uppl
y
Flop
pyD
rive
A/C
Thru
CO
MM
-
+C
OM
M -
+
•180
W M
AX•2
4V
DM
X
24ROAD PROVEN TECHNOLOGY | TMB
DM
X D
evic
e
Flop
pyD
rive
Dig
itial
COMM
DATA-
DATA+
5-Pi
n D
MX
DM
Xpo
wer
Con
A/C
NL4FX
010
2+2
4+1 (R
ed)
(Bla
ck)-1
GN
D +2Si
gnal
(Yel
low
)
Flop
pyFl
ex D
igita
l (R
GB)
Fire
fly F
lopp
yFle
x D
igita
l(P
orta
ble)
Wiri
ng D
iagr
am
Dat
e: 8
Aug
ust 2
018
25ROAD PROVEN TECHNOLOGY | TMB
11. Appendix
Limited Warranty
Firefly FloppyFlex products are warranted by TMB against defective materials or workman-
ship for a period of three (3) years from the date of original sale by TMB.
TMB’s warranty shall be restricted to the repair or replacement of any part that proves to
be defective and for which a claim is submitted to TMB before the expiration of the appli-
cable warranty periods.
This Limited Warranty is void if the defects of the Product are the result of:
• Opening the casing, repair, or adjustment by anyone other than TMB or
persons specifically authorized by TMB.
• Accident, physical abuse, mishandling, or misapplication of the product.
• Damage due to lightning, earthquake, flood, terrorism, war, or act of God.
TMB will not assume responsibility for any labor expended, or materials used, to replace
and/or repair the Product without TMB’s prior written authorization. Any repair of the
Product in the field, and any associated labor charges, must be authorized in advance by
TMB. Freight costs on warranty repairs are split 50/50: Customer pays to ship defective
product to TMB; TMB pays to ship repaired product, ground freight, back to Customer.
This warranty does not cover consequential damages or costs of any kind.
A Return Merchandise Authorization (RMA) Number must be obtained from TMB prior to return of any defective merchandise for warranty or non-warranty repair. For all repairs please contact TMB Tech Support Repair using the contact information below or email [email protected].
US
527 Park Ave.
San Fernando, CA 91340
Tel: +1 818.899.8818
Fax: +1 818.899.8813
www.tmb.com
UK
21 Armstrong Way
Southall, UB2 4SD England
Tel: +44 (0)20.8574.9700
Fax: +44 (0)20.8574.9701
www.tmb.com
26ROAD PROVEN TECHNOLOGY | TMB
Return Procedure
Please send returned merchandise prepaid and in the original packing. Freight call tags
will not be issued for shipping the product to TMB, but TMB will pay the freight for return
to the customer. Clearly label package with a Return Merchandise Authorization Number
(RMA #). Products returned without an RMA # will delay service. Please contact TMB and
request an RMA # prior to shipping the unit. Be prepared to provide the model number,
serial number, and a brief description of the cause for the return. Be sure to properly pack
the unit; any shipping damage resulting from inadequate packaging is the customer’s
responsibility. TMB reserves the right to use its own discretion to repair or replace
product(s). Proper UPS packing or double-boxing will better ensure product integrity
when shipped.
Note: If you are given an RMA #, please include the following information on a piece of paper inside the box:
1) Your name
2) Your address
3) Your phone number
4) The RMA #
5) A brief description of the symptoms
TMB 24/7 Technical Support
US/Canada: +1 818.794.1286
Toll Free: 1 877.862.3833 (877.TMB.DUDE)
UK: +44 (0)20.8574.9739
Toll Free: 0800.652.5418
E-mail: [email protected]