Fire Seal Full Presentation
-
Upload
maxibarrios -
Category
Documents
-
view
3.386 -
download
2
description
Transcript of Fire Seal Full Presentation
A DIVISION WITHIN
FireSeal - founded some 30 years ago with head office close toStockholm, Sweden.
Initially a supplier to nuclear power plants – since 20 year´s ourcore business is the marine & offshore market.
Fireseal a business unit within the mother company Essve with anannual turnover of € 60 million and 135 employees.
Essve owned by B & B Tools, a public company with an annualturnover of € 617 million (US$ 831 million).
COMPANY OVERVIEW
WORLDWIDE PRESENCE
North AmericaSouth America
AustriaCroatiaDenmarkDubaiFinlandIcelandItalySwedenNorwayPolandRussiaTurkeyU.K
AustraliaChinaHong KongRussiaMalaysiaSouth KoreaSingaporeVietnam
TESTING & APPROVALSFireSeal´s systems are designedin accordance with the SOLAS(Safety Of Life At Sea) regulationand IMO resolution (InternationalMaritime Organization).
All FireSeal´s systems areapproved for A0 - A60 or H0 - H60classification and resistance to;
- Fire- Water- Pressure- Smoke- Gas- Vibrations & Movements
US Coast Guard
Det Norske Veritas
Bureu Veritas
MED Germanischer Lloyd
ABS
Rhina
Korean Register
FireSeal´s systems has undergone testing under the harshest conditionspossibly and is certified by major authorities and classification societiessuch as;
Lloyd´s Register
TESTING & APPROVALS
One of the fastest and easiest system on themarket for cable, pipe and ductwork penetrations!
FLEX-D SYSTEM
FLEX-D SYSTEM
Smoke, gas, water and pressureresistance.
Average 20 min. installation time.
Movements and vibration of pipesand cables are accepted.
Two part numbers independently of;
a) pipe or cable penetration.b) sizes of cables.c) penetration size opening.
1. Firestop Sealant 3000 (Silicone Sealant)2. Blanket D-24B (Non-combustible calcium silicate fibre)
Watertight up to 2,5 kg (25 m or 2,5bar).
A0 - A60 and H0 - H60.
Cable penetration < 800 x 400 mm.
Pipe penetration < 534 x 274 mm
Uninsulated steel pipe < 48,3 mm.
Insulated steel pipe < 273 mm.
FLEX-D SYSTEM
FLEX-D PIPE INSTALLATION
FLEX-D PIPE INSTALLATIONA0 - A60 SLEEVE LENGTH 200 MM (H0 - H60 250 MM)
BLANKET D-24BFIRESTOP SEALANT 3000HANDTOOL & KNIFE
WHAT YOU NEED
REMOVE ANY LOOSE DEBRIS
CUT BLANKET D-24B, 100 MM WIDTH
ROLL THE BLANKET TO SUITABLE SIZE
ROLL THE BLANKET TO SUITABLE SIZE
PACK CAVITY WITH BLANKET
PACK CAVITY WITH BLANKET
PACK CAVITY WITH BLANKET
PACK CAVITY WITH BLANKET
PACK CAVITY WITH BLANKET
APPLY FIRESTOP SEALANT 3000
APPLY FIRESTOP SEALANT 3000
APPLY FIRESTOP SEALANT 3000
FINISHED SEAL ON ONE SIDE!
NOW THE OTHER SIDE OF THE SEAL
ROLL THE BLANKET
PACK CAVITY WITH BLANKET
APPLY FIRESTOP SEALANT 3000
TOTAL INSTALLATION TIME 10 - 15 MINUTES!
FLEX-D CABLE INSTALLATION(NEW PENETRATION)
FLEX-D CABLE INSTALLATION
WHAT YOU NEEDBLANKET D-24BFIRESTOP SEALANT 3000HANDTOOL & KNIFE
REMOVE LOOSE DEBRISE
CUT BLANKET 100 MM WIDE STRIP
ROLL THE BLANKET TO SUITABLE SIZE
PACK CAVITY WITH BLANKET
PACK CAVITY WITH BLANKET
PACK CAVITY WITH BLANKET
PACK CAVITY PROPERLY WITH BLANKET
DISTANCE 15 MM (A0 - A60) 25 MM (H0 - H60)
THE CAVITY IS PROPERLY PACKED
APPLY FIRESTOP SEALANT 3000
APPLY FIRESTOP SEALANT 3000
APPLY FIRESTOP SEALANT 3000
APPLY FIRESTOP SEALANT 3000
APPLY FIRESTOP SEALANT 3000
EVEN OUT THE FIRESTOP SEALANT 3000
EVEN OUT THE FIRESTOP SEALANT 3000
EVEN OUT THE FIRESTOP SEALANT 3000
ADD FIRESTOP SEALANT 3000 FORWATER TIGHTNESS IF NECCESARRY
NOW THE OTHER SIDE OF THE SEAL
FINISHED SEAL WITHIN 15 - 20 MINUTES!
FLEX-D CABLE INSTALLATION(ADDING A NEW CABLE)
CUT A HOLE WITH A KNIFE
PUSH THE CABLE THROUGH THE HOLE
ALTERNATIVE TOOL FOR ADDING CABLE
SEAL AROUND THE CABLE WITHFIRESTOP SEALANT 3000
EVEN OUT THE SEALANT
FIRESEAL FLEX-D BENEFITS
AVERAGE 20 MINUTES OPERATION.INSTALLATION
EASY, 5 MINUTES OPERATION.MODIFICATION
NO SPECIAL FRAMES REQUIRED.
TECHNICAL TRAINING
FLEX-D REQUIRES ONLY TWO PART NUMBERSINDEPENDANTLY OF APPLICATION AND PENETRATIONSIZE OPENING.
BUNDLED CABLES ACCEPTED.
20 - 30 MIN INSTALLATION TRAINING REQUIRED.
CABLE INSTALLATION
PART NUMBERS
FRAME INSTALLATION
* The FireSeal benefit overview is based upon using FireSeal Flex-D system which is the main FireSeal system usedfor all types of applications i.e. cables, pipes and ductwork.
WEIGHT LIGHT WEIGHT FIRE SEALING SYSTEM.
TOTAL COST VERY COMPETITIVE!
FS-03 SYSTEM1. Silicone foam D-03 comp. A and D-03 comp. B2. Blanket D-24B3. Silicone foam machine
2-component sealing system forcables, pipes and ductwork.
Suitable especially for larger andcomplicated penetrations.
Smoke, gas, water and pressureresistance.
Movements and vibration of pipesand cables accepted.
Installed by approved applicatorshaving access to special equipment.
0,5 bar resistance.
A0 - A60 and H0 - H60
Insulated steel pipe < 273 mm.
Uninsulated steel pipe < 60 mm.
Penetration opening < 600 x 400 mm.
FS-03 SYSTEM
FS-03 SYSTEM INSTALLATION
FIRESEAL FS-03 INSTALLATION
CUT BLANKET 25 MM WIDE STRIP
ROLL THE BLANKET TO SUITABLE SIZE
FILL THE CAVITY WITH THE BLANKET
FILL THE CAVITY WITH THE BLANKET
FILL THE CAVITY WITH THE BLANKET
PUT BLANKET D-24B BETWEEN CABLES
FILL CAVITY WITH FIRST LAYER OF FS-03
LEAVE FOR CURING ABOUT 3 MIN.
FILL CAVITY WITH SECONDAND A THIRD LAYER OF FS-03
LEAVE FOR CURING BETWEENTHE FILLING ABOUT 3 MIN.
FINAL RESULT USING FIRESEAL FS-03
PIPELOCK PL SYSTEM1. Pipelock PL (Phenolic plastic)2. FireStop Sealant 30003. Two steel sliding cleats
Complete, factory made seal forsingle plastic pipes.
Phenol plastic material i.e. 100 %corrosion resistant.
Available sizes: PL 55, PL 82,PL 110 and PL 160.
One of the fastest and easiestsystem on the market to install.
3 bar watertightness inconjunction with FireStop Sealant3000.
A0 - A60 approval.
Plastic pipe up to 160 mm in steelbulkhead / decks
Plastic pipe up to 110 mm inaluminium bulkhead / decks
PIPELOCK PL SYSTEM
PIPELOCKPLASTIC PIPE INSTALLATION
PIPELOCK PLASTIC PIPE INSTALLATION
PIPELOCK PARTS
PIPELOCK PARTS
PLACE THE PIPELOCKAROUND THE PLASTIC PIPE
PLACE THE PIPELOCKAROUND THE PLASTIC PIPE
To safeguard against the passage of smoke or gas, or to obtainwatertightness the joint beetween the pipe and the steel division should besealed with FireStop Sealant 3000.
PLACE THE PIPELOCKAROUND THE PLASTIC PIPE
LOCK THE PIPELOCK WITH THE CLAMPS
LOCK THE PIPELOCK WITH THE CLAMPS
LOCK THE PIPELOCK WITH THE CLAMPS
LOCK THE PIPELOCK WITH THE CLAMPS
SECURE PIPELOCK TO BULKHEADWITH SELF-TAPPING SCREWS
FINAL RESULT WITHIN 10 - 15 MINUTES!
SQUEEZER A1. Squeezer A2. Firestop Sealant 3000
Corrosion treated steel materialfor applications with limitedwater exposure.
Watertight: 300 kPa (30 mWC)
A0 - A60 approval.
Very simple and fast installation.
Standard plastic pipe sizes:55, 82, 114 and 110 mm
Complete, factory made sealfor single plastic pipes.
SQUEEZER APLASTIC PIPE INSTALLATION
SQUEEZER PLASTIC PIPE INSTALLATION
SQUEEZER PART
PLACE THE SQUEEZER AROUND THE PIPE
PLACE THE SQUEEZER AROUND THE PIPE
To safeguard against the passage of smoke or gas, or to obtainwatertightness the joint beetween the pipe and the steel division should besealed with FireStop Sealant 3000.
LOCK THE SQUEEZER
LOCK THE SQUEEZER
POSITION THE SQUEEZER
SECURE TO BULKHEAD OR DECKWITH SELF-TAPPING SCREWS
FINAL RESULT WITHIN 10 - 15 MINUTES!
SQUEEZER BMULTIPLE PLASTIC PIPES
SQUEEZER B1. Blanket D-24B (Non-combustible calcium silicate fibre)2. FireStop Sealant 3000 (Silicone elastomer)3. Graphite material
Complete, factory made seal formultiple plastic pipes.
Very simple, fast installation.
Ideal for plastic pipes up to 110mm.
Watertight: 250 kPa (25 mWC)
A0 - A60 approval.
REFERENCE LIST – MARINE
T-AKE-1 (NASSCO) Ammunition ShipCharles de Gaulle Aircraft CarrierVistafjord Cruise ShipSea Princess Cruise ShipSilja Symphony Passenger / Car ferrySilja Serenade Passenger / Car ferryFantasy Cruise ShipEcstasy Cruise ShipSong of Norway Cruise ShipSong of America Cruise ShipBirka Princess Cruise ShipSea Godess l & ll Cruise ShipWellamo Passenger / Car ferrySvea Passenger / Car ferryKarhu Ice-breaker
Isabella Passenger / Car ferryFrans Suell Passenger / Car ferryDawn Princess Cruise ShipSun Princess Cruise ShipSuper Carneval Cruise ShipRyndam Cruise ShipRhapsody of the Seas Cruise ShipAmorella Passenger / Car ferryAthena Passenger / Car ferry
REFERENCE LIST – MARINE
REFERENCE LIST – OFFSHORE
Alibaba Sovereign Oil, UKBalmoral Sun Oil, UKBeatrice B Brit Oil, UKBeryl B Mobil, UKBrent A, B, C, D Shell, UKBuchan BP, UKClaymore A Occidential, UKCleeton BP, UKClyde BP, UKCormorant A & North Shell, UKDan F Maersk, DKDraugen Shell, NOFulmar Shell, UKGoodwyn A Woodside, AUSGullfaks A, B, C Stat Oil, NO
Heidrun Conoco, NOHibernia HMDC, CATreasure Hunter Wilhelmsen, NOTroll Shell, NOTyra Danbor, DKValentin Shaskin State Owned, RUVenture SOEP, CAMISP Prirazlomnaya Sevmash, RUJotun Mobil, NOMaccullogh BP, UKMad Dog BP, USAMagnus BP, UKMichael Mirsksinks State Owned, RUMolinpaq Marathon, USAN´Kossa Elf Congo, FR
REFERENCE LIST – OFFSHORE
Oseberg A, B, C Norsk Hydro, NOSafe Gothia Consafe, SESafe Karinia Consafe, SEShell B.D Shell, UKShell C.D Shell, UKShip 137 British Gas, UKSleipner Stat Oil, NOSleipner Vest Stat Oil, NOStatfjord A, B, C Stat Oil, NoTartan A Texaco, UKThebaud SOEP, CAThames Arco Arco, UKULA BP, NOValhall Amoco, NOVesiefrikk Stat Oil, NO
REFERENCE LIST – OFFSHORE
HTTP://WWW.FIRESEAL.COM
INSTALLATIONGUIDES
APPROVALS
MATERIAL SAFETYDATA SHEETS