Fire Protection Price List Fire Protection Price...
Transcript of Fire Protection Price List Fire Protection Price...
Fire ProtectionPrice List
2013-FPEFFECTIVE MAY 13, 2013
VICTAULIC
WORLD HEADQUARTERS
P.O. Box 31Easton, PA 18044-0031 USA
4901 Kesslersville RoadEaston, PA 18040 USA
1 800 PICK VIC1 800 742 58421 610 559 33001 610 250 8817 (fax)[email protected]
www.victaulic.com
UNITED STATES
P.O. Box 31Easton, PA 18044-0031
1 610 559 33001 610 250 8817 (fax)[email protected]
CENTRAL AND SOUTH AMERICA
P.O. Box 31Easton, PA 18044-0031 USA
4901 Kesslersville RoadEaston, PA 18040 USA
1 610 559 33001 610 559 3608 (fax)[email protected]
4901 Kesslersville RoadEaston, PA 18040 USA
UPDATED 5/2013 PL2013-FP 0560 REV XVICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY. © 2013 VICTAULIC COMPANY. ALL RIGHTS RESERVED.
www.victaulic.comThe Victaulic website is an information resource that can help you with your piping projects. Among the many resources available at the site:
• Fully searchable product and project databases • Free product submittals • Free product literature • Piping software demos and modules • Information on new product innovations • Support services, and more...
2013 FPFire Protection Price List
SECTION 1 – FireLock® and Fire Protection Products
Style 009N FireLock EZ® Rigid Coupling
Style 005 FireLock Rigid Coupling
FireLock and Standard Fittings
Style 744 FireLock Flange Adapter
No. 67 End of Run Fitting
No. 10-DR Drain Elbow
Series 728 FireLock Grooved End Ball Valve
Series 705 FireLock Butterfly Valve – Supervised OPEN
Series 707C FireLock Butterfly Valve – Supervised CLOSED
Series 765 FireLock High Pressure Butterfly Valve – Supervised OPEN
Series 766 FireLock High Pressure Butterfly Valve – Supervised CLOSED
Series 771 OS&Y and Series 772 NRS Gate Valves
Series 773 and Series 774 Post Indicators
Supervisory Switches
Series 717H and 717 FireLock Check Valves
Series 722 FireLock Threaded Ball Valve
Series 732H FireLock Wye-Type Vic-Strainer®
Style 720 TestMaster II Alarm Module
Series 747M FireLock Commercial Zone Control Riser Module
Series 247 FireLock Residential Zone Control Riser Module
Style 735 FireLock Fire Pump Test Meter
SECTION 2 – Hole Cut Products
Style 920/920N Mechanical-T® Outlet
Vic-Tap II
Style 920/920N Mechanical-T Cross
Style 922 Outlet Tee
Style 923 Vic-Let™ Strapless Outlet
SECTION 3 – Couplings, Spare Parts and Fittings
Style 07 Zero-Flex® Rigid Coupling
Style 77 Standard Coupling
Style 177 QuickVic® Flexible Coupling for Steel
Style 75 Flexible Coupling
Style 750 Reducing Coupling
Spare Parts
IPS Size Grooved End Fittings
SECTION 4 – VicFlex™ Stainless Steel Sprinkler Fittings
Series AQB Braided Flexible Hose Assembly
Series AQU Unbraided Flexible Hose Assembly
Series AQI Braided System for Institutional Applications
Series AQC Braided System for Clean Room Applications
Series AQD Braided System for Industrial Duct Applications
VicFlex Parts and Accessories
SECTION 5 – Vic-Press® System for Schedule 10S Stainless Steel Pipe
Vic-Press – Press System for Schedule 10S, Type 304 Stainless Steel Piping
Vic-Press – Press System for Schedule 10S, Type 316 Stainless Steel Piping
SECTION 6 – Victaulic Carbon Steel Press System
Press System For Carbon Steel Piping
SECTION 7 – Pipe Preparation Tools
VE12 Groove-In-Place
VE26 S/C Groove-In-Place
VE26/VE46 Power Drive Kit
VE46 Groove-In-Place
VE226 B/S/M/C Portable Grooving Tool
VE226 Power Drive Kit
VE106 Groove-N-Go
VE272SFS Field Roll Grooving Tool
VE268 Shop Fabrication Grooving Tool
VPD752 Victaulic Power Drive
VAPS 112 Pipe Stand
VHCT 900 Hole Cutting Tool
HCT908 Hole Cutting Tool
NOTE: Categories can have a single discount applied. Any individual discounts listed will take precedence over category discounts.
Submitted By: __________________________________ Date: __________________________________
Approved By: ___________________________________ Date: __________________________________
1
IndexIn
DE
X
WWW.VICTAULIC.COM PL2013-FP
GEnERALGasket Selection Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4SECTIOn 1 – FireLock® and Fire Protection ProductsStyle 009N FireLock EZ® Rigid Coupling . . . . . . . . . . . . . . . . . . 6Style 005 FireLock Rigid Coupling . . . . . . . . . . . . . . . . . . . . . . . 7FireLock and Grooved IPS Pipe Fittings –
No. 001 – 90° FireLock Elbow . . . . . . . . . . . . . . . . . . . . . . . 8No. 003 – 45° FireLock Elbow . . . . . . . . . . . . . . . . . . . . . . . 8No. 10 - 90° IPS Elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8No. 11 - 45° IPS Elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8No. 002 – FireLock Tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9No. 006 – FireLock Cap. . . . . . . . . . . . . . . . . . . . . . . . . . . . 9No. 20 IPS Tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9No. 60 IPS Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Style 744 FireLock Flange Adapter . . . . . . . . . . . . . . . . . . . . . 10Flange Adapter Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10No. 67 End of Run Fitting . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11No. 10-DR Drain Elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11Series 728 FireLock Ball Valve . . . . . . . . . . . . . . . . . . . . . . . . 12Series 705 Butterfly Valve – Supervised OPEN . . . . . . . . . . . . 13Series 705 Weatherproof Actuator Replacement Kit . . . . . . . . . 13Series 707C Butterfly Valve – Supervised CLOSED . . . . . . . . . 14Series 765 High Pressure Butterfly Valve –
Supervised OPEN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14Series 766 High Pressure Butterfly Valve –
Supervised CLOSED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15Series 771 OS&Y and Series 772 NRS Gate Valves . . . . . . . . . 15Flange Mounting Kits – Series 772H NRS . . . . . . . . . . . . . . . . 15Series 773 and Series 774 Post Indicators . . . . . . . . . . . . . . . 16Supervisory Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16Series 717H FireLock Check Valve . . . . . . . . . . . . . . . . . . . . . 16Series 717 FireLock Check Valve . . . . . . . . . . . . . . . . . . . . . . . 17Series 722 Threaded Ball Valve . . . . . . . . . . . . . . . . . . . . . . . . 17Series 732H FireLock Wye-Type Vic-Strainer® . . . . . . . . . . . . . 18Series 720 TestMaster II Alarm Test Module . . . . . . . . . . . . . . 18Series 720 TestMaster II Alarm Test Module
with Gauge Port Tap . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19Series 720 TestMaster II Alarm Test Module
with Pressure Relief Option . . . . . . . . . . . . . . . . . . . . . . . 19Series 720 TestMaster II Alarm Test Module
with Pressure Relief and Gauge Port Options . . . . . . . . . . 20Series 747M Commercial Zone Control Riser Module . . . . . . . . 20Series 247 Residential Zone Control Riser Module . . . . . . . . . . 21Pressure Relief Valve Kit for Series 747M and 247 . . . . . . . . . . 21Series 735 Fire Pump Test Meter . . . . . . . . . . . . . . . . . . . . . . 22SECTIOn 2 – Hole Cut ProductsStyles 920/920N Mechanical-T® Outlet . . . . . . . . . . . . . . . . . . 24Vic-Tap® II . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26Style 922 Outlet Tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30Style 923 Vic-Let Strapless Outlet . . . . . . . . . . . . . . . . . . . . . . 30SECTIOn 3 – Couplings, Spare Parts and FittingsStyle 07 Zero-Flex® Rigid Coupling . . . . . . . . . . . . . . . . . . . . . 32Style 177 QuickVic® Flexible Coupling for Steel . . . . . . . . . . . . 32
Style 77 Standard Flexible Coupling . . . . . . . . . . . . . . . . . . . . 33Style 75 Flexible Coupling . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33Style 750 Reducing Coupling . . . . . . . . . . . . . . . . . . . . . . . . . 34Lubricant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35Gaskets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35Metal Liners . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36Plated Trackhead Bolts and Nuts . . . . . . . . . . . . . . . . . . . . . . 37Go-No-Go Pipe Tape . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37Elbows – . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
No. 12 - 22Z\x° . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38No. 13 - 11Z\v° . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38No. 100 and No. 110 1Z\x D Long Radius Elbows . . . . . . . . 38
No. 29M Tee with Threaded Branch . . . . . . . . . . . . . . . . . . . . 39No. 35 Cross. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39No. 33 True Y . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39No(s). 40, 42, and 43 Adapter Nipples . . . . . . . . . . . . . . . . . . 40No. 80 Female Threaded Adapter . . . . . . . . . . . . . . . . . . . . . . 40No(s). 18 and 19 Adapter Elbows . . . . . . . . . . . . . . . . . . . . . . 41No. 25 Grooved Reducing Tee . . . . . . . . . . . . . . . . . . . . . . . . 42No. 29T Threaded Reducing Tee . . . . . . . . . . . . . . . . . . . . . . 44No. 50 Concentrc Reducers . . . . . . . . . . . . . . . . . . . . . . . . . . 45No. 51 Eccentric Reducers . . . . . . . . . . . . . . . . . . . . . . . . . . . 45No. 52 Reducer – Male Threaded Small End . . . . . . . . . . . . . . 46SECTIOn 4 – VicFlex™ Sprinkler Fitting SystemSeries AQB Flexible Sprinkler Fitting Assembly –
with Series AH2 Hose and Style AB1 Bracket . . . . . . . . . 48Series AQB Flexible Sprinkler Fitting Assembly –
with Series AH2 Hose and Style AB2 Bracket . . . . . . . . . 49Series AQB Flexible Sprinkler Fitting Assembly –
with Series AH2 Hose and Style AB4 Bracket . . . . . . . . . 50Series AQB Flexible Sprinkler Fitting Assembly –
with Series AH2 Hose and Style AB10 Bracket . . . . . . . . . 51Series AQB Flexible Sprinkler Fitting Assembly –
with Series AH4 Hose and Style AB1 Bracket . . . . . . . . . 52Series AQB Flexible Sprinkler Fitting Assembly –
with Series AH4 Hose and Style AB7 Bracket . . . . . . . . . 53Series AQU Flexible Sprinkler Fitting Assembly
with Unbraided Hose – with Series AH5 Hose and Style AB7 Bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Series AQI Flexible Sprinkler Fitting Assembly with Braided Hose and Institutional Bracket . . . . . . . . . . . 58
Series AQC Flexible Sprinkler Fitting Assembly with Braided Hose for Clean Room Applications . . . . . . . . 58
Series AQS Sub-Assemblies – Non-Hose Components . . . . . . 58SECTIOn 5 – Vic-Press™ System
for Schedule 10S Stainless Steel PipeVic-Press™ 304
Seal Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60Style P500 Loose Seals . . . . . . . . . . . . . . . . . . . . . . . . . . . 61Style P597 Standard Coupling . . . . . . . . . . . . . . . . . . . . . . 61Style P596 Male Adapter – Threaded . . . . . . . . . . . . . . . . . 61Series P569 Type 316 Stainless Steel Ball Valve . . . . . . . . . 62Series P589 Brass Body Ball Valve . . . . . . . . . . . . . . . . . . 62Style P586 90° Elbow – Short Tangent . . . . . . . . . . . . . . . 62
WWW.VICTAULIC.COM PL2013-FP2
Table of ContentsTA
BLE
OF
CO
NTE
NTS
Style P542 90° Street Elbow . . . . . . . . . . . . . . . . . . . . . . . 63Style P591 45° Elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63Style P543 45° Street Elbow . . . . . . . . . . . . . . . . . . . . . . . 63Style P592 Tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64Style P593 Tee – Reducing Branch . . . . . . . . . . . . . . . . . . 64Style P588 Tee – Reducing Branch – Threaded . . . . . . . . . 64Style P594 Concentric Reducer . . . . . . . . . . . . . . . . . . . . . 65Style P595 Flange Adapter . . . . . . . . . . . . . . . . . . . . . . . . 65Style P565 Flange Adapter . . . . . . . . . . . . . . . . . . . . . . . . 65Style P587 Transition Nipple . . . . . . . . . . . . . . . . . . . . . . . 65Style P584 Threaded Union. . . . . . . . . . . . . . . . . . . . . . . . 66Style P599 Female Adapter – Threaded . . . . . . . . . . . . . . . 66Style P561 Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66Style P540 End Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66PFT510 Vic-Press Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Vic-Press 316Seal Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68Style P500 Loose Seals . . . . . . . . . . . . . . . . . . . . . . . . . . . 69Style P507 Standard Coupling . . . . . . . . . . . . . . . . . . . . . . 69Style P576 Male Adapter – Threaded . . . . . . . . . . . . . . . . . 69Style P508 Slip Coupling . . . . . . . . . . . . . . . . . . . . . . . . . . 69Series P569 Stainless Steel Ball Valve . . . . . . . . . . . . . . . . 70Series P569 Repair Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . 70Series P589 Brass Body Ball Valve . . . . . . . . . . . . . . . . . . 70Style P568 90° Elbow – Short Tangent . . . . . . . . . . . . . . . 71Style P562 90° Street Elbow . . . . . . . . . . . . . . . . . . . . . . . 71Style P571 45° Elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71Style P563 45° Street Elbow . . . . . . . . . . . . . . . . . . . . . . . 72Style P572 Tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72Style P573 Tee – Reducing Branch . . . . . . . . . . . . . . . . . . 72Style P578 Tee – Reducing Branch Threaded . . . . . . . . . . 73Style P574 Concentric Reducer . . . . . . . . . . . . . . . . . . . . . 73Style P575 Flange Adapter . . . . . . . . . . . . . . . . . . . . . . . . . 73Style P566 Flange Adapter . . . . . . . . . . . . . . . . . . . . . . . . 74Style P577 Adapter Nipple . . . . . . . . . . . . . . . . . . . . . . . . . 74Style P585 Threaded Union . . . . . . . . . . . . . . . . . . . . . . . . 74Style P579 Female Adapter – Threaded . . . . . . . . . . . . . . . 75Style P560 End Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75PFT510 Vic-Press Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
SECTIOn 6 – Victaulic Carbon Steel Press SystemGasket Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78Style 500 Loose O-Rings . . . . . . . . . . . . . . . . . . . . . . . . . . 78Style 505 Standard Coupling . . . . . . . . . . . . . . . . . . . . . . . 79Style 510 90° Elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79Style 509 90° Elbow - Short Tangent . . . . . . . . . . . . . . . . . 79Style 506 Slip Coupling . . . . . . . . . . . . . . . . . . . . . . . . . . . 80Style 511 45° Elbow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80Style 580 Male Adapter – Threaded . . . . . . . . . . . . . . . . . . 80Style 580 Female Adapter – Threaded . . . . . . . . . . . . . . . . 81Style 520 Tee – Female Reducing Branch . . . . . . . . . . . . . 81Style 550 Reducer Insert . . . . . . . . . . . . . . . . . . . . . . . . . . 81Style 520 Tee – Reducing Branch . . . . . . . . . . . . . . . . . . . 82
Style 520 Straight Tee . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82Style 520 End-of-Line – Threaded Reducing Branch . . . . . 82Style 520 End-of-Line – Carbon Steel Press
Reducing Branch . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83Style 522 Brass Body Ball Valve . . . . . . . . . . . . . . . . . . . . 83
Section 7 – Pipe Preparation ToolsVic-Easy® Roll Grooving Tools – Field Portable
VE12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86VE26 S/C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86VE26/VE46 Power Drive Kit . . . . . . . . . . . . . . . . . . . . . . . . 86VE46 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87VE226 B/S/M/C/BSS/MSS/P . . . . . . . . . . . . . . . . . . . . . . . 87VE226 Power Drive Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
Vic-Easy Roll Grooving Tools – Field FabricationVE106 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89VE272SFS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
Vic-Easy Roll Grooving Tools – Shop FabricationVE268 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
Vic-Easy Tool AccessoriesVPD752 Victaulic Power Drive . . . . . . . . . . . . . . . . . . . . . . 93VAPS112 Pipe Stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
Hole Cutting ToolsVHCT900 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94HCT908 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
Vic-Press ToolPFT510 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
How to Order . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95Terms and Conditions of Tool Rental . . . . . . . . . . . . . . . . . . . . 96Terms and Conditions of Tool Sale . . . . . . . . . . . . . . . . . . . . . . 97Terms and Conditions of Sale . . . . . . . . . . . . . Inside Back CoverWarranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Inside Back CoverVictaulic Contact Information . . . . . . . . . . . . . . . . . . . Back Cover
3
Table of ContentsTA
BLE
OF C
ON
TENTS
WWW.VICTAULIC.COM PL2013-FP
Gasket Selection GuideRefer to publication 05.01 for more information.
IMPORTAnT PLEASE READ BEFORE ORDERInG. Gasket selection must always be specified on your order.
Standard Gaskets
IPS
GRADETEMP.
RANGE COMPOUNDCOLOR CODE GENERAL SERVICE RECOMMENDATIONS
E † –30°F to +230°F EPDM Green
Stripe
Recommended for hot water service within the specified tempera-ture range plus a variety of dilute acids, oil-free air and many chemi-cal services. UL classified in accordance with ANSI/NSF 61 for cold +86°F/+30°C and hot +180°F/+82°C potable water service. NOT RECOMMENDED FOR PETROLEUM SERVICES.
E(Type A)
Ambient EPDM VioletStripe
Applicable for wet and dry (oil-free air) sprinkler services only. For dry services, Victaulic continues to recommend the use of FlushSeal® gaskets. NOT RECOMMENDED FOR HOT WATER SERVICES.
† Vic-Plus gasket. Lubrication not required.
Special Gaskets
IPS
GRADETEMP.
RANGE COMPOUNDCOLOR CODE GENERAL SERVICE RECOMMENDATIONS
L –30°F to +350°F Silicone RedGasket
Recommended for dry heat, air without hydrocarbons to +350°F/+177°C and certain chemical services.
WWW.VICTAULIC.COM PL2013-FP4
GasketsG
ASk
ET
SELE
CTI
On
GU
IDE
SECTION 1 – FireLock® and Fire Protection Products
FireLock® and Fire Protection Products
5WWW.VICTAULIC.COM PL2013-FP
Style 009N FireLock EZ® Rigid Coupling
FireLock EZ® Rigid Coupling
STYLE 009nRefer to publication 10.64
See Victaulicpublication 10.01
for details.
STYLE 009n – GRADE “E” (TYPE A) GASkET
PIPE Inches
Aprx. Wgt. Ea.
COUPLING COMPLETE † with Grade “E” (Type A) Gasket SPARE PARTS
Nom. Size Outside Dia. Lbs
Price Each Grade “E” (Type A) GasketPainted Galv.
1Z\v 1.660 1.4 $42.50 $51.00 $40.00
1Z\x 1.900 1.4 43.50 52.00 43.00
2 2.375 1.8 49.00 57.50 46.00
2Z\x 2.875 1.9 56.50 68.00 50.00
3 3.500 2.2 64.00 79.50 57.00
4 4.500 2.9 90.50 108.50 76.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
WWW.VICTAULIC.COM PL2013-FP6
FireLock Couplings, Fittings, Valves, and Accessories SE
CTI
On
1
FIR
ELO
Ck
SYS
TEM
FO
R G
RO
OVE
D I
PS
PIP
E
Style 005 FireLock Rigid Coupling
FireLock Rigid Coupling
STYLE 005Refer to publication 10.02
See Victaulicpublication 10.01
for details.
STYLE 005 – VIC-PLUS GRADE “E” (TYPE A) GASkET
PIPE Inches
COUPLING COMPLETE † With Vic-Plus § Grade “E” (Type A)
Gasket SPARE PARTS
Nom. Size
Outside Dia.
Aprx. Wgt. Each
Lbs
Price Each Grade E (Type A) Gasket
Only Price Ea.
Bolt & Nut *
Painted Galv. No.Size inches/ millimeters
Price Each Pltd.
1Z\v 1.660 1.5 $46.50 $56.00 $40.50 2 C\, x 2Z\v $12.00
1Z\x 1.900 1.6 48.00 57.00 44.00 2 C\, x 2Z\v 12.00
2 2.375 1.9 53.00 63.00 47.00 2 C\, x 2Z\x 13.00
2Z\x 2.875 2.0 61.50 73.50 51.00 2 C\, x 2Z\x 13.00
3 3.500 2.4 70.00 85.50 58.50 2 C\, x 2Z\x 13.00
4 4.500 3.8 98.50 118.00 78.00 2 C\, x 2Z\x 13.00
5 5.563 4.5 120.00 151.00 76.50 2 Z\x x 3 16.00
6 6.625 5.5 143.50 174.50 84.50 2 Z\x x 3 16.00
8 8.625 11.4 240.50 292.00 121.00 2 B\, x 4Z\v 18.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
* Number of bolts equals number of segments supplied.
Note: Style 005 FireLock bolts and nuts are sized for use with Style 005 couplings only and must not be used with other Victaulic products.Grade E (Type A) EPDM gaskets are applicable for wet and dry fire sprinkler systems (ambient temperature) only.
† Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.
FireLock Rigid Coupling
STYLE 005Refer to publication 10.02
See Victaulicpublication 10.01
for details.
STYLE 005 – VIC-PLUS GRADE “E” (TYPE A) FLUSHSEAL GASkET
PIPE Inches
COUPLING COMPLETE † With Vic-Plus § Grade “E” (Type A) FlushSeal Gasket SPARE PARTS
Nom. Size
Aprx. Wgt. Each
(lbs)
Price Each Grade “E” (Type A) Vic-Plus FlushSeal Gasket
Only Price EachPainted Galvanized
1Z\v 1.5 $62.50 $68.50 $56.00
1Z\x 1.6 65.00 75.50 61.50
2 1.9 69.50 82.00 67.00
2Z\x 2.0 83.50 96.00 69.50
3 2.4 89.50 104.50 82.50
4 3.8 125.00 145.50 109.50
5 4.5 206.50 237.50 153.00
6 5.5 227.50 266.00 196.00
8 11.4 368.50 427.00 215.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Standard gasket and FlushSeal gasket approved for dry pipe systems to –40°F/–40°C. Based on "typical" pipe surface condi-tions, supplemental lubricant is recommended for services installed below 0°F/–18°C and for all dry pipe systems or systems to be subjected to air tests prior to being filled with water. Supplemental lubrication may also be required on pipe with raised or undercut weld seams or pipe that has voids and/or cracks at the weld seams. Victaulic continues to recommend the use of FlushSeal gaskets for dry services.
† Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.
7
FireLock Couplings, Fittings, Valves, and Accessories
WWW.VICTAULIC.COM PL2013-FP
SECTIO
n 1
FIR
ELOCk
SYSTEM
FOR
GR
OO
VED IP
S PIP
E
FireLock and Grooved IPS Pipe Fittings –No. 001 – 90° FireLock Elbow, No. 003 – 45° FireLock Elbow
FireLock Fittings
90° ELBOW nO. 001 45° ELBOW nO. 003Refer to publication 10.03
nO. 001
nO. 003
See Victaulicpublication 10.01
for details.
FIRELOCk FITTInGS – 90° ELBOW OR 45° ELBOW
Nom. Size 90° Elbow No. 001 45° Elbow No. 003
Inches
Aprx. Wgt. Each
Lbs
Price Each Aprx. Wgt. Each
Lbs
Price Each
Painted Galv. Painted Galv.
2 1.8 $37.50 $48.00 1.3 $37.50 $48.00
2Z\x 2.5 50.00 68.00 2.2 50.00 62.50
3 3.9 65.50 87.50 2.9 65.50 83.00
4 6.3 94.00 130.50 5.4 94.00 125.50
5 12.6 222.00 292.50 8.3 222.00 273.00
6 13.3 261.00 359.00 11.7 261.00 329.00
8 26.0 509.50 726.00 20.4 509.50 701.00
NOTE: FireLock Fittings are designed for use with FireLock and FireLock EZ couplings. Use of other products may result in bolt pad interference.
No. 10 - 90° IPS Elbow, No. 11 - 45° IPS Elbow
Fittings
90° ELBOW nO. 10 45° ELBOW nO. 11Refer to publication 07.01
nO. 10
nO. 11
FITTInGS – 90° ELBOW OR 45° ELBOW
Nom. Size 90° Elbow No. 10 45° Elbow No. 11
Inches
Aprx. Wgt. Ea.
Lbs.C - E
Inches
Price Each Aprx. Wgt. Ea.
Lbs.C - E
Inches
Price Each
Painted Galv. Painted Galv.
C\v 0.5 2.25 $140.50 $148.00 0.5 1.50 $140.50 $148.00
1 0.6 2.25 75.00 99.50 0.6 1.75 75.00 94.50
1Z\v 1.0 2.75 75.00 99.50 0.9 1.75 75.00 94.50
1Z\x 1.2 2.75 75.00 99.50 0.9 1.75 75.00 94.50
10 63.3 9.00 1469.50 1902.50 37.5 4.75 1469.50 1603.00
12 74.0 10.00 2352.00 3034.50 66.7 5.25 2352.00 2740.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
(sw) Victaulic fittings are made of ductile iron, except those marked (sw) segmentally welded steel.
WWW.VICTAULIC.COM PL2013-FP8
FireLock Couplings, Fittings, Valves, and Accessories SE
CTI
On
1
FIR
ELO
Ck
SYS
TEM
FO
R G
RO
OVE
D I
PS
PIP
E
No. 002 – FireLock Tee, No. 006 – FireLock Cap
FireLock Fittings
TEE nO. 002 CAP nO. 006Refer to publication 10.03
nO. 002
nO. 006
See Victaulicpublication 10.01
for details.
FIRELOCk FITTInGS – TEE OR CAP
Nom. Size Tee No. 002 Cap No. 006
Inches
Aprx. Wgt. Each
Lbs
Price Each Aprx. Wgt. Each
Lbs
Price Each
Painted Galv. Painted Galv.
1Z\v – – – 0.4 $20.00 $31.00
1Z\x – – – 0.6 21.00 31.00
2 2.5 $57.00 $71.00 0.7 25.00 34.50
2Z\x 3.6 75.00 96.00 1.0 29.50 37.50
3 5.3 104.50 134.00 1.3 35.00 45.50
4 9.0 158.00 206.00 2.4 51.50 70.50
5 15.7 365.50 457.50 4.1 104.50 142.50
6 22.7 421.00 549.50 5.9 116.50 161.00
8 38.7 895.00 1182.00 12.7 221.50 303.00
NOTE: FireLock Fittings are designed for use with FireLock and FireLock EZ couplings. Use of other products may result in bolt pad interference.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
No. 20 IPS Tee
Fittings
TEE nO. 20Refer to publication 07.01
nO. 20
See Victaulicpublication 10.01
for details.
FITTInGS – STAnDARD TEE
Nom. SizeAprx.
Wgt. Ea.Tee
No. 20
Inches Lbs
Price Each
Painted Galv.
C\v 0.6 $151.00 $163.00
1 1.0 116.50 152.00
1Z\v 1.5 116.50 152.00
1Z\x 2.0 116.50 152.00
10 73.0 2859.50 3701.50
12 99.0 3985.00 5090.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
No. 60 IPS Cap
Fittings
CAP nO. 60Refer to publication 07.01
nO. 60
FITTInGS – CAP
Nom. Size Cap No. 60
Inches
Aprx. Wgt. Ea.
Lbs
Price Each
Painted Galv.
C\v 0.2 $152.50 $165.50
1 0.3 63.50 76.00
1Z\v 0.3 63.50 76.00
1Z\x 0.5 63.50 76.00
10 21.0 615.00 801.00
12 35.6 1005.50 1280.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Caps are malleable/ductile iron.
9
FireLock Couplings, Fittings, Valves, and Accessories
WWW.VICTAULIC.COM PL2013-FP
SECTIO
n 1
FIR
ELOCk
SYSTEM
FOR
GR
OO
VED IP
S PIP
E
Style 744 FireLock Flange Adapter
FireLock Flange Adapter
STYLE 744 – 175 PSI WITH VIC-PLUS GASkETRefer to publication 10.04
See Victaulicpublication 10.01
for details.
STYLE 744 – VIC-PLUS GRADE “E” (TYPE A) GASkET
PIPE Inches VIC-FLANGE COMPLETE † SPARE PARTS
Nominal Size
Outside Diameter
Aprx. Wgt. Each
Lbs
Price Each Vic-Plus Grade “E” (Type A)
Gasket Price Ea.Painted Galv.
Style 744 - Hinged
2 2.375 2.7 $186.50 $216.00 $34.50
2Z\x 2.875 4.2 217.00 258.00 40.50
3 3.500 4.8 244.50 293.00 42.50
4 4.500 6.5 318.00 387.50 56.00
5 5.563 8.3 381.50 465.00 67.00
6 6.625 9.0 416.00 506.50 78.00
8 8.626 13.9 522.50 653.50 104.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
The Vic-Flange adapters utilize standard ANSI 125/150 flange bolts (supplied by installer). Bolt hole pattern is standard for ANSI CL. 150 and 125 CL flanges.
For Flange Washers see Spare Parts.
† Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.
Flange Adapter Notes
Victaulic Flange Adapter Washer Notes
Victaulic flange adapters require a smooth, hard surface at the mating flange face for effective sealing. Some applications, for which the Victaulic flange adapter is otherwise well suited, do not provide an adequate mating surface. In such cases, it is recommended that a metal flange washer be inserted between the Victaulic flange adapter and the mating flange to provide the necessary sealing surface. See Spare Parts Section for flange washer prices.
Typical applications where a Victaulic flange washer should be used are:
1. When mating to a serrated flange: a flange gasket should be used adjacent to the serrated flange. The flange washer is then inserted between the Victaulic flange adapter and the flange gasket.
2. When mating to a wafer valve: where typical valves are rubber lined and partially rubber faced (smooth or not), the flange washer is placed between the valve and the Victaulic flange adapter.
3. When mating to a rubber faced flange: the flange washer is placed between the Victaulic flange adapters and the rubber faced flange.
4. When mating C.I. flanges to IPS flanges: the flange washer is placed between two Victaulic flange adapters. If one flange is not a Victaulic flange adapter (e.g., a flanged valve), then a flanged gasket must be placed adjacent to that flange and the flange washer must be inserted between the flange gasket and the Victaulic flange adapter.
5. When mating to components (valves, strainers, etc.) where the component flange face has an insert: follow the same arrangement as in # 1 above.
WWW.VICTAULIC.COM PL2013-FP10
FireLock Couplings, Fittings, Valves, and Accessories SE
CTI
On
1
FIR
ELO
Ck
SYS
TEM
FO
R G
RO
OVE
D I
PS
PIP
E
No. 67 End of Run Fitting
End of Run Fitting
nO. 67Refer to publication 10.21
See Victaulicpublication 10.01
for details.
EnD OF RUn FITTInG
Nominal SizeAprx.
Weight Each Price Each
Inches Lbs Painted Galv.
1Z\v x Z\x NPT 1.4 $70.00 $87.50
C\v NPT 1.4 70.00 87.50
1 NPT 1.4 70.00 87.50
1Z\x x Z\x NPT 1.6 70.00 87.50
C\v NPT 1.6 70.00 87.50
1 NPT 1.6 70.00 87.50
2 x Z\x NPT 1.7 75.00 99.00
C\v NPT 1.7 75.00 99.00
1 NPT 1.7 75.00 99.00
2Z\x x Z\x NPT 2.0 89.50 108.00
C\v NPT 2.0 89.50 108.00
1 NPT 2.0 89.50 108.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
No. 10-DR Drain Elbow
Drain Elbow
nO. 10-DRRefer to publication 10.05
USA
See Victaulicpublication 10.01
for details.
DRAIn ELBOW WITH 1” DRAIn
Nom. SizeAprx
Wgt. Ea. Price Each
Inches Lbs Painted Galv.
2Z\x 5.2 $175.50 $225.50
3 5.3 224.00 267.50
4 8.8 227.50 309.00
6 18.7 399.00 568.00
11
FireLock Couplings, Fittings, Valves, and Accessories
WWW.VICTAULIC.COM PL2013-FP
SECTIO
n 1
FIR
ELOCk
SYSTEM
FOR
GR
OO
VED IP
S PIP
E
Series 728 FireLock Ball Valve
Fire Protection Valves
FireLock Ball Valve
SERIES 728Refer to publication 10.17
THREADED
GROOVED
See Victaulicpublication 10.01
for details.
SERIES 728 – WITH WEATHERPROOF ACTUATOR
Nominal Size
T x T Ball Valve with Weatherproof Actuator †
G x G Ball Valve with Weatherproof Actuator † *
Inches
Aprx. Wgt. Each
Lbs Price Each
Aprx. Wgt. Each
Lbs Price Each
1 5.1 $262.00 – –
1Z\v 5.8 278.00 7.5 $278.00
1Z\x 6.6 331.00 8.5 331.00
2 8.5 399.50 10.5 399.50
* Grooved valve will come standard with a Z\x” NPT tap.† Please specify choice of grooved or threaded ends on order.
B - 020 - 4 6 6 T - W2
TypeAct.
In./mmSize
CodePressure
Rating Body/Ball Seat End Connection Operator
B 010012014020
1/251¼/321½/402/50
4 - 365 psi 6 - Bronze/Chrome Plated Brass
6 - Reinforced TFE T - ThreadedG - Grooved*
W2 - UL/ULC/FM Weatherproof Gear Operator w/2 SPDT SwitchesW9 - UL/FM Weatherproof Gear Operator with 2 SPDT Switches and Extra Long Wire Leads
* 1¼"/32 mm, 1½"/40 mm and 2"/50 mm only
WWW.VICTAULIC.COM PL2013-FP12
FireLock System for Grooved IPS PipeSE
CTI
On
1
FIR
ELO
Ck
SYS
TEM
FO
R G
RO
OVE
D I
PS
PIP
E
Series 705 Butterfly Valve – Supervised OPEN
Butterfly Valve – Supervised OPEn
SERIES 705
(with weatherproof actuator)Refer to publication 10.81
See Victaulicpublication 10.01
for details.
SERIES 705 BUTTERFLY VALVE
Nominal Size
WRD – Pre-wired without Tap
WRD – Pre-wired with Tap
Inches
Aprx. Wgt. Each
Lbs Price Each
Aprx. Wgt. Each
Lbs Price Each
2 8.2 $636.50 8.2 $699.50
2Z\x 9.7 636.50 9.7 699.50
3 10.7 688.50 10.7 756.00
4 14.0 722.00 14.0 792.00
5 25.4 1081.50 23.7 –
6 28.7 1025.50 28.7 1114.50
8 43.0 1571.00 43.0 1678.00
10 80.6 3803.50 – –
12 94.6 5432.50 – –
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Series 705 Weatherproof Actuator Replacement Kit
Weatherproof Actuator Replacement Kit
FOR SERIES 705 – SUPERVISED OPEn OnLY
(Consists of mounting bolt, actuator, handwheel and assembly hardware)Refer to publication 10.81
GEAR OPERATOR REPAIR kIT FOR SERIES 705
Nominal Size inches Part Code
Kit Price Each
2 K020705100 $528.50
2Z\x K024705100 528.50
3 K030705100 528.50
4 K040705100 567.50
5 K050705100 567.50
6 K060705100 617.00
8 K080705100 1458.50
10 K100705100 1897.50
12 K120705100 1897.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
13
FireLock System for Grooved IPS Pipe
WWW.VICTAULIC.COM PL2013-FP
SECTIO
n 1
FIR
ELOCk
SYSTEM
FOR
GR
OO
VED IP
S PIP
E
Series 707C Butterfly Valve – Supervised CLOSED
Butterfly Valve – Supervised CLOSED
SERIES 707C
(with weatherproof actuator)Refer to publication 10.75
See Victaulicpublication 10.01
for details.
SERIES 707C – PRE-WIRED
Nominal Size
WRD – Pre-wired without Tap
Inches
Aprx. Wgt. Each
Lbs Part Code Price Each
2 8.2 V020707900 $666.00
2Z\x 9.7 V024707900 666.00
3 10.7 V030707900 719.50
4 14.0 V040707900 754.50
5 25.4 V050707900 1130.00
6 28.7 V060707900 1072.00
8 43.0 V080707900 1641.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Series 765 High Pressure Butterfly Valve – Supervised OPEN
High Pressure Butterfly Valve – Supervised OPEn
SERIES 765
(with Weatherproof Actuator)Refer to publication 10.80
SERIES 765 GROOVED EnD HIGH PRESSURE BUTTERFLY VALVE
Nominal Size
Pre-wired without Tap
Pre-wired with Tap
Inches
Aprx. Wgt. Each
Lbs Price Each
Aprx. Wgt. Each
Lbs Price Each
2 9.5 $746.00 9.5 $809.50
2Z\x 9.7 772.00 9.7 838.00
3 10.7 835.00 10.7 905.00
4 14.0 875.00 14.0 949.50
5 25.8 1311.00 25.8 1430.00
6 28.7 1243.50 28.7 1348.50
8 43.0 1904.00 43.0 2066.00
10 80.6 4611.50 – –
12 94.6 6586.00 – –
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
WWW.VICTAULIC.COM PL2013-FP14
FireLock System for Grooved IPS PipeSE
CTI
On
1
FIR
ELO
Ck
SYS
TEM
FO
R G
RO
OVE
D I
PS
PIP
E
Series 766 High Pressure Butterfly Valve – Supervised CLOSED
High Pressure Butterfly Valve – Supervised CLOSED
SERIES 766
(with Weatherproof Actuator)Refer to publication 10.83
SERIES 766 GROOVED EnD HIGH PRESSURE BUTTERFLY VALVE
Nominal Size
Pre-wired without Tap
Inches
Aprx. Wgt. Each
Lbs Part Code Price Each
2 8.2 V020766900 $746.00
2Z\x 9.7 V024766900 772.00
3 10.7 V030766900 835.00
4 14.0 V040766900 875.00
5 25.4 V050766900 1311.00
6 28.7 V060766900 1243.50
8 43.0 V080766900 1904.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Series 771 OS&Y and Series 772 NRS Gate Valves
Series 771H OS&Y Groove x Groove Series 771F OS&Y Groove x Flange Series 772H NRS Groove x Groove Series 772F NRS Groove x Flange Gate ValvesRefer to publication 10.92 SERIES 771H SERIES 772H SERIES 771F SERIES 772F
See Victaulicpublication 10.01
for details.
Gate Valve Size Inches
Approx. Weight Each
Lbs
Series 771H OS&Y Groove x Groove
Price Each
Series 771F OS&Y Groove x Flange
Price Each
Approx. Weight Each
Lbs
Series 772H NRS Groove x Groove
Price Each
Series 772F NRS Groove x Flange
Price Each
2Z\x 30.6 $821.00 $821.00 29.3 $759.50 $759.50
3 71.0 1067.00 1067.00 63.0 1021.00 1021.00
4 77.0 1256.00 1256.00 70.0 1216.00 1216.00
6 144.0 1682.50 1682.50 117.0 1559.00 1559.00
8 238.0 2637.50 2637.50 188.0 2302.50 2302.50
10 344.7 3551.00 3551.00 297.7 3346.00 3346.00
12 489.5 5539.50 5539.50 394.9 4682.00 4682.00
Flange Mounting Kits – Series 772H NRS
Flange Mounting Kits for use with Series 772H NRS Gate Valves
FLAnGE MOUnTInG kITS FOR USE WITH SERIES 772F nRS GATE VALVES
Gate Valve Size Inches Price Each
3 - 4 $195.50
6 - 8 235.50
10 364.00
REPLACEMEnT HAnDWHEELS FOR SERIES 772H AnD 772F nRS GATE VALVES
Gate Valve Size Inches Price Each
3 - 4 $39.50
6 - 8 110.00
15
FireLock System for Grooved IPS Pipe
WWW.VICTAULIC.COM PL2013-FP
SECTIO
n 1
FIR
ELOCk
SYSTEM
FOR
GR
OO
VED IP
S PIP
E
Series 773 and Series 774 Post Indicators
Series 773 and Series 774 Post Indicators
SERIES 773
SERIES 774
See Victaulicpublication 10.01
for details.
SERIES 773 AnD SERIES 774 POST InDICATORS
Description
Approx. Weight Ea.
Lbs
Series 773 Wall Post Indicator
Price Each
Series 773 Wall Post Indicator Wall Post Indicators include all hard-ware required to mount indicator to valve. 90.0 $960.00
Series 774 Upright Post Indicator 250.0 2095.50
Supervisory Switches
Supervisory Switches SUPERVISORY SWITCHES
Model Description Price Each
OSY2 Outside Screw and Yoke Valve Supervisory Switch $272.50
Series 717H FireLock Check Valve
FireLock Check Valve
SERIES 717HRefer to publication 10.08
SERIES 717H
Size Inches
Aprx. Weight Each
Lbs Price Each
2 10.7 $345.50
2Z\x 13.8 365.00
3 20.0 365.00
WWW.VICTAULIC.COM PL2013-FP16
FireLock System for Grooved IPS PipeSE
CTI
On
1
FIR
ELO
Ck
SYS
TEM
FO
R G
RO
OVE
D I
PS
PIP
E
Series 717 FireLock Check Valve
FireLock Check Valve
SERIES 717Refer to publication 10.08
2Z\x AnD 3”
4 – 12”
See Victaulicpublication 10.01
for details.
SERIES 717
Size Inches
Aprx. Weight Each
Lbs Price Each
2Z\x 3.6 $365.00
3 3.6 365.00
4 20.0 379.50
5 27.0 923.00
6 38.0 945.50
8 64.0 1642.00
10 100.0 3128.50
12 140.0 4081.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Series 722 Threaded Ball Valve
Threaded Ball Valve
SERIES 722Refer to publication 08.15
See Victaulicpublication 10.01
for details.
SERIES 722
Nominal Size Inches
Aprx. Wgt. Each Lbs Price Each
Z\v 0.2 $49.00
Z\x 0.4 68.50
C\v 0.7 68.50
1 1.0 91.50
1Z\v 1.5 145.50
1Z\x 2.1 179.50
2 2.4 239.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
17
FireLock System for Grooved IPS Pipe
WWW.VICTAULIC.COM PL2013-FP
SECTIO
n 1
FIR
ELOCk
SYSTEM
FOR
GR
OO
VED IP
S PIP
E
Series 732H FireLock Wye-Type Vic-Strainer®
FireLock Wye-Type Vic-Strainer®
SERIES 732HRefer to publication 10.68
SERIES 732H
Nominal SizeAprx.
Weight Each Price Each
Inches Lbs Galvanized *Standard
Basket Only
2 10.0 $1521.50 $994.00
2Z\x 14.0 1619.00 1036.50
3 20.0 1846.00 900.50
4 32.0 2148.00 937.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
* Vic-Strainer Series 732H standard components include galvanized body, access cap and coupling (Grade “E” EPDM, plated bolts and nuts) and Type 304 stainless steel basket (0.062” diameter holes for 2 – 3”/50 – 80 mm sizes; and 0.188” diameter holes for 4”/100 mm sizes). Contact Victaulic for details.
Series 720 TestMaster II Alarm Test Module
TestMaster II Alarm Test Module
SERIES 720Refer to publication 10.22
SERIES 720T WITH THREADED EnDS
SERIES 720G WITH GROOVED EnDS
See Victaulicpublication 10.01
for details.
TESTMASTER II ALARM TEST MODULE
Size Style 720T NPT Threaded Style 720G Grooved
Inches Orifice
Aprx. Wgt. Each
Lbs Price Each
Aprx. Wgt. Each
Lbs Price Each
1 x Z\x 7.3 $283.50 – –
ZM\cx 7.3 283.50 – –
1Z\v x Z\x 6.9 326.00 6.6 $326.00
ZM\cx 6.9 326.00 6.6 326.00
1Z\x x Z\x 9.0 532.00 8.5 532.00
ZM\cx 9.0 532.00 8.5 532.00
2 x Z\x 10.1 574.00 9.3 574.00
ZM\cx 10.1 574.00 9.3 574.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
WWW.VICTAULIC.COM PL2013-FP18
FireLock System for Grooved IPS PipeSE
CTI
On
1
FIR
ELO
Ck
SYS
TEM
FO
R G
RO
OVE
D I
PS
PIP
E
Series 720 TestMaster II Alarm Test Module with Gauge Port Tap
TestMaster II Alarm Test Module
SERIES 720 WITH GAUGE PORT TAPRefer to publication 10.22
See Victaulicpublication 10.01
for details.
TESTMASTER II ALARM TEST MODULE – WITH GAUGE PORT TAP
Size Style 720T Threaded with Gauge Port Tap Style 720G Grooved with Gauge Port Tap
Inches Orifice
Aprx. Wgt. Each
Lbs Price Each
Aprx. Wgt. Each
Lbs Price Each
1 x Z\x 7.3 $313.00 – –
ZM\cx 7.3 313.00 – –
1Z\v x Z\x 6.9 355.50 6.6 $355.50
ZM\cx 6.9 355.50 6.6 355.50
1Z\x x Z\x 9.0 562.50 8.5 562.50
ZM\cx 9.0 562.50 8.5 562.50
2 x Z\x 10.1 603.50 9.3 603.50
ZM\cx 10.1 603.50 9.3 603.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Series 720 TestMaster II Alarm Test Module with Pressure Relief Option
TestMaster II Alarm Test Module
SERIES 720 WITH PRESSURE RELIEF OPTIOnRefer to publication 10.22
See Victaulicpublication 10.01
for details.
TESTMASTER II ALARM TEST MODULE – WITH PRESSSURE RELIEF OPTIOn
Size Style 720T Threaded with Pressure Relief Option
Inches Orifice
Aprx. Wgt. Each
Lbs Price Each
1 x Z\x 7.3 $421.00
ZM\cx 7.3 421.00
1Z\v x Z\x 6.9 468.50
ZM\cx 6.9 468.50
1Z\x x Z\x 9.0 679.50
ZM\cx 9.0 679.50
2 x Z\x 10.1 706.00
ZM\cx 10.1 706.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
19
FireLock System for Grooved IPS Pipe
WWW.VICTAULIC.COM PL2013-FP
SECTIO
n 1
FIR
ELOCk
SYSTEM
FOR
GR
OO
VED IP
S PIP
E
Series 720 TestMaster II Alarm Test Module With Pressure Relief and Gauge Port Options
TestMaster II Alarm Test Module
SERIES 720 WITH PRESSURE RELIEF AnD GAUGE PORT OPTIOnSRefer to publication 10.22
See Victaulicpublication 10.01
for details.
TESTMASTER II ALARM TEST MODULE – WITH PRESSURE RELIEF AnD GAUGE PORT OPTIOnS
Size Style 720T Threaded with Pressure Relief and Gauge Port Option
Inches Orifice
Aprx. Wgt. Each
Lbs Price Each
1 x Z\x 7.3 $451.00
ZM\cx 7.3 +
1Z\v x Z\x 6.9 499.00
ZM\cx 6.9 499.00
1Z\x x Z\x 9.0 710.50
ZM\cx 9.0 710.50
2 x Z\x 10.1 737.00
ZM\cx 10.1 737.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
Series 747M Commercial Zone Control Riser Module
Commercial Zone Control Riser Module
SERIES 747MRefer to publication 10.96
See Victaulicpublication 10.01
for details.
SERIES 747M – COMMERCIAL ZOnE COnTROL RISER MODULE
Riser Module Body Size Drain Size
Aprx. Wgt. Each Price Each
Nominal Inches Inches Lbs Style 747M Grooved *
1Z\v 1 15.2 $766.50
1Z\x 1 15.5 783.00
2 1 19.9 820.00
2Z\x 1Z\v 22.7 886.00
3 1Z\v 23.2 930.00
4 2 30.3 1139.50
6 2 36.7 1272.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
*Price includes all components pictured at left.
See Part Code Configuration Guide
WWW.VICTAULIC.COM PL2013-FP20
FireLock System for Grooved IPS PipeSE
CTI
On
1
FIR
ELO
Ck
SYS
TEM
FO
R G
RO
OVE
D I
PS
PIP
E
Series 247 Residential Zone Control Riser Module
Residential Zone Control Riser Module
SERIES 247Refer to publication 10.97
See Victaulicpublication 10.01
for details.
SERIES 247 – RESIDEnTIAL ZOnE COnTROL RISER MODULE
Riser Module Body Size Drain Size
Aprx. Wgt. Each Price Each
Nominal Inches Inches Lbs Style 247M Grooved *
1 1 15.2 $719.00
1Z\v 1 15.2 766.50
1Z\x 1 15.5 783.00
2 1 19.9 820.00
See Part Code Configuration Guide
Pressure Relief Valve Kit for Series 747M and 247
Pressure Relief Valve Kit
FOR SERIES 747M AnD 247 RISER MODULESRefer to publication 10.97
SERIES 747M AnD 247 PRESSURE RELIEF VALVE kIT
Riser Module Body Size Victaulic Price
Nominal Inches Part Code Each
1 – 6 V000747K01 $354.00
21
FireLock System for Grooved IPS Pipe
WWW.VICTAULIC.COM PL2013-FP
SECTIO
n 1
FIR
ELOCk
SYSTEM
FOR
GR
OO
VED IP
S PIP
E
Part Code Configuration Guide
SERIES 247 AnD SERIES 747M
SERIES 247 AnD 747M RISER MODULES PART CODE COnFIGURATIOn GUIDE
Code Definition Options
A Class V : Fluid Control Devices
BBB Size (inlet x outlet x drain) Note 2 *
010 : 1” x 1” x 1”
012 : 1Z\v” x 1Z\v” x 1”
014 : 1Z\x” x 1Z\x” x 1”
020 : 2” x 2” x 1”
024 : 2Z\x” x 2Z\x” x 1Z\v”
030 : 3” x 3” x 1Z\v”
040 : 4” x 4” x 2”
060 : 6” x 6” x 2”
CCC Series 247 : Series 247 Residential Riser Module
747 : Series 747M Commercial Riser Module
D Finish P : Painted in Orange color
E Drain Type G : Grooved Connection
F : NPT Female Threaded Connection
F Trim Selection S : Standard Trim
G Approved Agency U : UL/FM
C : ULC/FM
HHH K Factor (Orifice) Note 3 *
028 (K2.8), 030 (K3.0), 035 (K3.5), 042 (K4.2), 049 (K4.9), 056 (K5.6), 069 (K6.9), 080 (K 8.0), 112 (K11.2), 140 (K14.0), 168 (K 16.8)
Notes
1. Example: “V040747PFSU56” denotes a Series 747M Commercial Zone Control Riser Module painted in orange color; 4” grooved inlet/4” grooved outlet/2” grooved drain connection; standard trim; UL/FM approved; with K5.6 flow restrictor.
2. Available sizes for Series 247 Residential Riser Modules : 010, 012, 014, 020
Available sizes for Series 747M Commercial Riser Modules : 012, 014, 020, 024, 030, 040, 060
3. Approved K Factors for 1” to 2” Series 247 Residential Riser Modules : 028, 030, 035, 042, 049, 056
Approved K Factors for 1” to 2” Series 747M Commercial Riser Modules : 056
Approved K Factors for 2Z\x” to 3” Series 747M Commercial Riser Modules : 056, 069, 080, 112
Approved K Factors for 4” to 6” Series 747M Commercial Riser Modules : 056, 069, 080, 112, 140, 168
Series 735 Fire Pump Test Meter
Fire Pump Test Meter
SERIES 735Refer to publication 10.11
FMAPPROVED
Request Victaulicpublication 10.01
for details.
SERIES 735 – MODEL S OR MODEL L
Nominal Size
Gallons Minute Style 735 Model S Style 735 Model L
Inches (GPM)Wgt. Ea.
Lbs Price EachWgt. Ea.
Lbs Price Each
2Z\x 100 9.0 $7943.50 14.0 $12822.50
2Z\x 150 9.0 7943.50 14.0 12822.50
3 200 10.0 8745.00 15.0 13711.50
4 250 12.0 9938.50 17.0 14277.50
4 300 12.0 9938.50 17.0 14277.50
4 450 12.0 9938.50 17.0 14277.50
5 500 13.0 10914.00 18.0 14346.50
6 750 15.0 11912.00 20.0 15621.00
6 1000 15.0 11912.00 20.0 15621.00
6 1250 15.0 11912.00 20.0 15621.00
8 1500 22.0 13496.00 27.0 17401.00
8 2000 22.0 13496.00 27.0 17401.00
8 2500 22.0 13496.00 27.0 17401.00
8 3000 22.0 13496.00 27.0 17401.00
10 3500 33.0 16077.00 38.0 20242.50
10 4000 33.0 16077.00 38.0 20242.50
10 4500 33.0 16077.00 38.0 20242.50
12 5000 66.0 20046.00 71.0 24796.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
WWW.VICTAULIC.COM PL2013-FP22
FireLock System for Grooved IPS PipeSE
CTI
On
1
FIR
ELO
Ck
SYS
TEM
FO
R G
RO
OVE
D I
PS
PIP
E
SECTION 2 – Hole Cut Products
Hole Cut Products
23WWW.VICTAULIC.COM PL2013-FP
Styles 920/920N Mechanical-T® Outlet
Mechanical-T® Outlet
STYLES 920 AnD 920nRefer to publication 11.02
STYLE 920 FEMALE
See Victaulicpublication 10.01
for details.
STYLE 920 – FEMALE THREADED BRAnCH
Size StyleComplete Mechanical-T
Female Threaded Branch † Spare Parts
Inches Run x Brch. Number
Aprx. Wgt. Ea.
Lbs
Price Each
Bolts & Nuts Size Inches
Standard Grade “E”
or “T” GasketsPainted Galv.
2 x Z\x 920N 3.1 $70.00 $88.50 Z\x x 2C\v $14.50
C\v 920N 3.1 70.00 88.50 Z\x x 2C\v 14.50
1 920N 3.0 70.00 88.50 Z\x x 2C\v 14.50
1Z\v 920N 3.5 81.00 101.00 Z\x x 2C\v 16.50
1Z\x 920N 3.6 81.00 101.00 Z\x x 2C\v 16.50
2Z\x x Z\x 920N 3.0 70.00 88.50 Z\x x 2C\v 14.50
C\v 920N 3.0 70.00 88.50 Z\x x 2C\v 14.50
1 920N 2.9 70.00 88.50 Z\x x 2C\v 14.50
1Z\v 920N 3.5 99.00 120.50 Z\x x 3Z\v 16.50
1Z\x 920N 3.6 99.00 120.50 Z\x x 3 16.50
3 x Z\x 920N 3.4 81.00 99.00 Z\x x 2C\v 14.50
C\v 920N 3.4 81.00 99.00 Z\x x 2C\v 14.50
1 920N 3.3 81.00 99.00 Z\x x 2C\v 14.50
1Z\v § 920N 3.8 102.50 128.50 Z\x x 2C\v 16.50
1Z\x § 920N 4.1 102.50 128.50 Z\x x 2C\v 16.50
2 § 920N 4.9 118.00 147.00 Z\x x 3Z\v 16.50
4 x Z\x 920N 3.7 102.00 122.00 Z\x x 2C\v 14.50
C\v 920N 3.7 102.00 122.00 Z\x x 2C\v 14.50
1 920N 3.6 102.00 122.00 Z\x x 2C\v 14.50
1Z\v 920N 4.0 119.50 141.00 Z\x x 2C\v 16.50
1Z\x 920N 4.2 124.50 156.50 Z\x x 2C\v 16.50
2 920N 5.0 124.50 158.00 Z\x x 2C\v 16.50
2Z\x 920 5.8 130.00 168.50 1 x 2C\v 19.00
3 920 8.4 138.50 177.50 1 x 3Z\v 21.00
5 x 1Z\x 920 7.7 152.00 192.50 B\, x 4C\v 16.50
2 920 8.2 152.00 192.50 B\, x 4C\v 16.50
2Z\x 920 8.3 160.50 204.50 B\, x 4C\v 19.00
3 920 8.4 170.50 219.50 B\, x 4C\v 21.00
6 x 1Z\v 920N – – – Z\x x 2C\v 16.50
1Z\x 920N 5.1 156.00 199.50 Z\x x 2C\v 16.50
2 920N 5.6 156.00 199.50 Z\x x 2C\v 16.50
2Z\x 920 7.6 168.00 217.00 B\, x 4C\v 19.00
3 920 8.4 178.00 229.50 B\, x 4C\v 21.00
4 920 10.1 197.50 257.50 B\, x 4C\v 28.00
8 x 2 920 11.6 272.50 344.00 C\v x 4Z\v 20.00
2Z\x 920 11.6 272.50 344.00 C\v x 4Z\v 20.00
3 920 12.6 287.50 364.50 C\v x 4Z\v 21.00
4 920 15.3 296.00 382.50 C\v x 4Z\v 28.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Vic-Hole Cutting Tool available, designed specifically for cutting holes to receive Mechanical-T outlet. See Pipe Preparation Tool Section for information.
† Some size Mechanical-T outlets are available with British Standard Pipe Threads (BSPT) female threaded outlets. Contact Victaulic for details.
§ Requires Z\x x 3Z\v” bolts when used in cross configuration.
WWW.VICTAULIC.COM PL2013-FP24
Hole Cut ProductsSE
CTI
On
2
HO
LE C
UT
PR
OD
UC
TS
Mechanical-T® Outlet
STYLES 920/920nRefer to publication 11.02
STYLE 920 GROOVED
See Victaulicpublication 10.01
for details.
STYLES 920/920n GROOVED MECHAnICAL-T OUTLET
Size StyleComplete Mechanical-T
Grooved Branch Spare Parts
Inches Run x Brch. Number
Aprx. Wgt. Ea.
Lbs
Price Each
Bolts & Nuts Size Inches
Standard Grade “E”
or “T” GasketsPainted Galv.
2 x 1 920N – – – – $14.50
1Z\v 920N 3.5 $81.00 $101.00 Z\x x 2C\v 16.50
1Z\x 920N 3.2 81.00 101.00 Z\x x 2C\v 16.50
2Z\x x 1 920N – – – – 14.50
1Z\v 920N 3.2 99.00 120.50 Z\x x 3Z\v 16.50
1Z\x 920N 3.3 99.00 120.50 Z\x x 3 16.50
3 x 1 920N – – – – 14.50
1Z\v § 920N 3.7 102.50 128.50 Z\x x 2C\v 16.50
1Z\x § 920N 3.8 102.50 128.50 Z\x x 2C\v 16.50
2 § 920N 4.6 118.00 147.00 Z\x x 3Z\v 16.50
3Z\x x 2 920N 5.0 460.50 575.00 Z\x x 2C\v 16.50
4 x 1 920N – – – – 14.50
1Z\v 920N 3.6 119.50 141.00 Z\x x 2C\v 16.50
1Z\x 920N 3.9 124.50 156.50 Z\x x 2C\v 16.50
2 920N 4.6 124.50 158.00 Z\x x 2C\v 16.50
2Z\x 920 5.0 130.00 168.50 Z\x x 2C\v 19.00
3 920 6.4 138.50 177.50 Z\x x 3Z\v 21.00
5 x 1Z\x 920 7.6 152.00 + B\, x 4C\v 16.50
2 920 8.0 152.00 192.50 B\, x 4C\v 16.50
2Z\x 920 7.9 160.50 + B\, x 4C\v 19.00
3 920 8.8 170.50 219.50 B\, x 4C\v 21.00
6 x 1Z\v 920N 4.8 156.00 199.50 Z\x x 2C\v 16.50
1Z\x 920N 5.1 156.00 199.50 Z\x x 2C\v 16.50
2 920N 5.6 156.00 199.50 Z\x x 2C\v 16.50
2Z\x 920 8.3 170.50 217.00 B\, x 4C\v 19.00
3 920 9.9 178.00 229.50 B\, x 4C\v 21.00
4 920 10.1 197.50 257.50 B\, x 4C\v 28.00
8 x 2 920 11.4 272.50 + C\v x 4Z\v +
2Z\x 920 11.6 272.50 344.00 C\v x 4Z\v 20.00
3 920 11.6 287.50 364.50 C\v x 4Z\v 21.00
4 920 12.5 296.00 382.50 C\v x 4Z\v 28.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Vic-Hole Cutting Tool available, designed specifically for cutting holes to receive Mechanical-T outlet. See Pipe Preparation Tool Section for information.
§ Requires Z\x x 3Z\v” bolts when used in cross configuration.
+ Quoted on application. Contact Victaulic for pricing and availability.
25
Hole Cut Products
WWW.VICTAULIC.COM PL2013-FP
SECTIO
n 2
H
OLE
CUT P
RO
DU
CTS
Vic-Tap® II
Vic-Tap® II * Parts A and B are designed for use with Style 931 Vic-Tap II Mechanical-T units; (Part C) for tapping into systems under pressure up to 500 psi.
Part “A” Includes drill guide base with extended shaft, arbor, pilot drill, 2C\,” hole saw, packing gland and HP-70 Rigid Coupling for connection to Vic-Tap II.
Part “B” Includes drill motor with ground fault interrupt and clip-on feed wheel assembly.
Part “C” Vic-Tap II with 2Z\x” full port ball valve factory mounted. Available in sizes 4 x 2Z\x”, 5 x 2Z\x”, 6 x 2Z\x”, and 8 x 2Z\x”. Available for purchase only (parts not sold separately).
* Parts A & B can be purchased separately.
Tool Model Part NumberShipping Weight
LbsRental
Per Month List Price
Vic-Tap II - Parts A and B only R-000-902-VT2 70 $3838.50 $8470.00
Part A only R-100-902-VT2 – – 5777.50
Part B only R-300-901-VT1 – – 5787.50
Part C 4 x 2Z\x” / 114.3 x 73.0 mm R-016-931-010 – – 1697.50
5 x 2Z\x” / 141.3 x 73.0 mm R-020-931-010 – – 1697.50
6 x 2Z\x” / 168.3 x 73.0 mm R-024-931-010 – – 1697.50
8 x 2Z\x” / 219.1 x 73.0 mm R-032-931-010 – – 1773.00
NOTE: For this application, a ground fault interrupt MUST be used. Available for purchase at $605.50. Part. No. N-E15-000-004.
WWW.VICTAULIC.COM PL2013-FP26
Hole Cut Products SE
CTI
On
2
HO
LE C
UT
PR
OD
UC
TS
Mechanical-T Cross
STYLE 920/920n *Refer to publication 11.03
See Victaulicpublication 10.01
for details.
The following combinations of Mechanical-T Crosses can be achieved with the use of two Mechanical-T Upper Housings of the same run size and the same or different outlet size. Most sizes of Mechanical-T outlets are available with either grooved or female threaded outlets. Your choice must be specified on each order.STYLES 920/920n MECHAnICAL-T CROSS
Nominal Size Inches Style
COMPLETE MECHANICAL-T CROSS with “E” or “T” Gasket †
Run x Branch
Number Painted Galv. A B
2 x 2 x Z\x x Z\x 920N $111.00 $142.00
Z\x x C\v 920N 127.00 163.00
Z\x x 1 920N 111.00 142.00
Z\x x 1Z\v 920N 127.00 163.00
Z\x x 1Z\x 920N 127.00 163.00
C\v x C\v 920N 111.00 163.00
C\v x 1 920N 111.00 142.00
C\v x 1Z\v 920N 127.00 163.00
C\v x 1Z\x 920N 127.00 163.00
1 x 1 920N 111.00 142.00
1 x 1Z\v 920N 127.00 163.00
1 x 1Z\x 920N 127.00 163.00
1Z\v x 1Z\v 920N 127.00 163.00
1Z\x x 1Z\v 920N 127.00 163.00
1Z\x x 1Z\x 920N 127.00 163.00
2Z\x x 2Z\x x Z\x x Z\x 920N 111.00 142.00
Z\x x C\v 920N 111.00 142.00
Z\x x 1 920N 111.00 142.00
Z\x x 1Z\v 920N 152.50 197.00
Z\x x 1Z\x 920N 152.50 210.50
C\v x C\v 920N 111.00 142.00
C\v x 1 920N 111.00 142.00
C\v x 1Z\v 920N 152.50 197.00
C\v x 1Z\x 920N 152.50 210.50
1 x 1 920N 111.00 142.00
1 x 1Z\v 920N 152.50 197.00
1 x 1Z\x 920N 152.50 197.00
1Z\v x 1Z\v 920N 152.50 197.00
1Z\x x 1Z\v 920N 152.50 197.00
1Z\x x 1Z\x 920N 152.50 163.00
3 x 3 x Z\x x Z\x 920N 124.50 160.50
Z\x x C\v 920N 124.50 160.50
Z\x x 1 920N 152.50 190.50
Z\x x 1Z\v 920N 152.50 190.50
Z\x x 1Z\x 920N 152.50 190.50
Z\x x 2 920N 176.50 218.50
* Style 920 and Style 920N housings cannot be mated to achieve cross connections.Refer to publication 21.03, or contact Victaulic for details.‡ Available grooved only.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
† Some size Mechanical-T outlets are available with British Standard Pipe Threads (BSPT) female threaded outlets. Contact Victaulic for details.
§ Requires Z\x x 3Z\v” bolts when used in cross configuration.
27
Hole Cut Products
WWW.VICTAULIC.COM PL2013-FP
SECTIO
n 2
H
OLE
CUT P
RO
DU
CTS
Nominal Size Inches Style
COMPLETE MECHANICAL-T CROSS with “E” or “T” Gasket †
Run x Branch
Number Painted Galv. A B
3 x 3 x C\v x C\v 920N $124.50 $160.50
C\v x 1 920N 152.50 190.50
C\v x 1Z\v 920N 152.50 190.50
C\v x 1Z\x 920N 152.50 190.50
C\v x 2 920N 176.50 218.50
1 x 1 920N 124.50 160.50
1 x 1Z\v 920N 152.50 152.50
1 x 1Z\x 920N 152.50 190.50
1 x 2 920N 176.50 218.50
1Z\v x 1Z\v § 920N 152.50 190.50
1Z\x x 1Z\v § 920N 152.50 190.50
1Z\x x 1Z\x § 920N 152.50 190.50
2 x 1Z\v § 920N 176.50 198.50
2 x 1Z\x 920N 176.50 218.50
2 x 2 § 920N 176.50 218.50
4 x 4 x Z\x x Z\x 920N 152.50 198.00
Z\x x C\v 920N 152.50 198.00
Z\x x 1 920N 152.50 198.00
Z\x x 1Z\v 920N 185.00 232.50
Z\x x 1Z\x 920N 185.00 232.50
Z\x x 2 920N 198.00 234.00
C\v x C\v 920N 152.50 198.00
C\v x 1 920N 152.50 198.00
C\v x 1Z\v 920N 185.00 232.50
C\v x 1Z\x 920N 185.00 232.50
C\v x 2 920N 198.00 234.00
1 x 1 920N 152.50 198.00
1 x 1Z\v 920N 169.50 234.00
1 x 1Z\x 920N 198.00 232.50
1 x 2 920N 198.00 234.00
1Z\v x 1Z\v 920N 185.00 232.50
1Z\x x 1Z\v 920N 185.00 232.50
1Z\x x 1Z\x 920N 185.00 232.50
2 x 1Z\v 920N 198.00 234.00
2 x 1Z\x 920N 198.00 234.00
2 x 2 920N 198.00 234.00
2Z\x x 2Z\x 920 198.00 252.00
3 x 2Z\x 920 206.50 267.00
3 x 3 920 206.50 267.00
* Style 920 and Style 920N housings cannot be mated to achieve cross connections.Refer to publication 21.03, or contact Victaulic for details.‡ Available grooved only.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
† Some size Mechanical-T outlets are available with British Standard Pipe Threads (BSPT) female threaded outlets. Contact Victaulic for details.
§ Requires Z\x x 3Z\v” bolts when used in cross configuration.
WWW.VICTAULIC.COM PL2013-FP28
Hole Cut Products SE
CTI
On
2
HO
LE C
UT
PR
OD
UC
TS
Nominal Size Inches Style
COMPLETE MECHANICAL-T CROSS with “E” or “T” Gasket †
Run x Branch
Number Painted Galv. A B
5 x 5 x 1Z\x x 1Z\x 920 $226.50 $287.50
2 x 1Z\x 920 238.50 287.50
2 x 2 920 226.50 287.50
2Z\x x 1Z\x 920 238.50 304.50
2Z\x x 2 920 238.50 304.50
2Z\x x 2Z\x 920 238.50 304.50
3 x 1Z\x 920 255.50 328.00
3 x 2 920 255.50 328.00
3 x 2Z\x 920 255.50 328.00
3 x 3 920 255.50 328.00
6 x 6 x 1Z\v ‡ x 1Z\v ‡ 920N 232.00 298.50
1Z\x x 1Z\v ‡ 920N 232.00 298.50
1Z\x x 1Z\x 920N 232.00 298.50
2 x 1Z\x 920N 232.00 298.50
2 x 2 920N 242.00 322.50
2Z\x x 2Z\x 920 249.00 322.50
3 x 2Z\x 920 266.00 341.50
3 x 3 920 266.00 341.50
4 x 2Z\x 920 294.50 382.50
4 x 3 920 294.50 382.50
4 x 4 920 294.50 382.50
8 x 8 x 2 x 2 920 407.50 514.50
2Z\x x 2 920 407.50 514.50
2Z\x x 2Z\x 920 407.50 514.50
3 x 2Z\x 920 429.00 545.50
3 x 3 920 429.00 545.50
4 x 2Z\x 920 443.50 573.00
4 x 3 920 443.50 573.00
4 x 4 920 443.50 573.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
* Style 920 and Style 920N housings cannot be mated to achieve cross connections.Refer to publication 21.03, or contact Victaulic for details.‡ Available grooved only.
+ Quoted on application. Contact Victaulic for pricing and availability.
† Some size Mechanical-T outlets are available with British Standard Pipe Threads (BSPT) female threaded outlets. Contact Victaulic for details.
§ Requires Z\x x 3Z\v” bolts when used in cross configuration.
29
Hole Cut Products
WWW.VICTAULIC.COM PL2013-FP
SECTIO
n 2
H
OLE
CUT P
RO
DU
CTS
Style 922 Outlet Tee
Outlet Tee
STYLE 922Refer to publication 10.52
See Victaulicpublication 10.01
for details.
STYLE 922 – GRADE “E” EPDM TYPE A GASkET
Nominal Size Inches
Aprx. Wgt. Ea.
COMPLETE OUTLET-TEE Grade “E” Type A Gasket
COMPLETE OUTLET-TEE Grade “E” Type A Gasket
Branch x Run Lbs.
Price Each
Painted Galv.
1Z\v x Z\x 1.07 $15.50 $29.50
C\v 1.17 15.50 29.50
1 1.20 15.50 31.50
1Z\x x Z\x 1.15 15.50 29.50
C\v 1.20 15.50 29.50
1 1.42 15.50 32.00
2 x Z\x 1.30 15.50 32.00
C\v 1.37 15.50 32.00
1 1.50 16.00 36.50
2Z\x x Z\x 1.40 18.00 36.50
C\v 1.50 18.00 36.50
1 1.65 18.00 38.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Style 923 Vic-Let Strapless Outlet
Vic-Let Strapless Outlet
STYLE 923Refer to publication 11.05
4 – 8”
10” – UP
VIC-LET STRAPLESS OUTLET – WITH GRADE “E” GASkET
Nominal SizeVIC-LET COMPLETE
With “E” or “T” Gasket *
InchesAprx. Wgt. Per Unit
LbsPrice
Per Unit
4 – 8 x Z\x NPT IPS 2.28 $173.50
4 – 8 x C\v NPT IPS 2.28 185.50
10 and larger x Z\x NPT IPS 2.16 173.50
10 and larger x C\v NPT IPS 2.16 185.50
* Available with Grade “T” Gasket. Contact Victaulic for details.
WWW.VICTAULIC.COM PL2013-FP30
Hole Cut ProductsSE
CTI
On
2
HO
LE C
UT
PR
OD
UC
TS
SECTION 3 – Couplings, Spare Parts and Fittings
Couplings, Spare Parts and Fittings
31WWW.VICTAULIC.COM PL2013-FP
Style 07 Zero-Flex® Rigid Coupling
Grooved IPS Pipe Couplings
Zero-Flex® Rigid Coupling
STYLE 07
(with Style 77 gasket)Refer to publication 06.02
See Victaulicpublication 10.01
for details.
STYLE 07 – GRADE “E” OR “T” GASkET OR FLUSHSEAL® GASkET
PIPE
Apprx. Wgt. Ea.
COUPLING COMPLETE † With Grade “E” or
“T” Gasket
COUPLING COMPLETE † with FlushSeal®
“E” or “T” Gasket SPARE PARTS
Inches
Lbs.
Price Each Price Each Plated Bolt & Nut
Nom. Size
Outside Dia. Painted Galv. Painted Galv. No. *
Size § Inches
1 1.315 1.6 $58.00 $73.00 $82.50 $98.00 2 C\, x 2
1Z\v 1.660 1.7 58.00 73.00 82.50 98.00 2 C\, x 2
1Z\x 1.900 1.9 58.00 73.00 82.50 98.00 2 C\, x 2
2 2.375 2.2 73.50 92.50 97.00 116.50 2 Z\x x 2Z\x
2Z\x 2.875 2.6 84.00 106.50 117.00 137.00 2 Z\x x 2C\v
3 3.500 3.0 97.50 124.50 123.50 151.50 2 Z\x x 2Z\x
4 4.500 4.8 136.00 175.50 172.50 213.00 2 Z\x x 2C\v
5 5.563 6.7 175.50 229.00 273.50 482.00 2 B\, x 3Z\v
6 6.625 8.3 232.00 300.50 322.50 394.50 2 B\, x 3Z\v
8 8.625 15.1 365.50 475.00 426.00 533.00 2 C\v x 4Z\v
10 10.750 23.5 528.50 705.50 635.50 807.50 2 M\, x 6Z\x
12 12.750 28.2 590.50 791.00 723.00 929.50 2 M\, x 6Z\x
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
† Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.
§ Metric thread size bolts available. Contact Victaulic.
NOTE: See Spare Parts Section for spare part prices.
Style 177 QuickVic® Flexible Coupling for Steel
QuickVic® Flexible Coupling for Steel
STYLE 177Refer to publication 06.20
STYLE 177 – GRADE “EHP” OR “T” GASkET
PIPEAprx.
Wgt. Ea.COUPLING COMPLETE †
With Grade “EHP” or “T” Gasket SPARE PARTS
Inches
Lbs
Price Each
Grade “EHP” or “T” Gasket
Nom. Size
Outside Dia. Painted Galv.
2 2.375 2.0 $63.50 $84.00 $49.50
2Z\x 2.875 2.4 74.00 103.50 54.00
3 3.500 3.1 82.50 114.00 61.50
4 4.500 3.7 118.50 167.50 82.50
5 5.563 4.8 179.50 258.00 117.50
6 6.625 6.3 212.50 304.50 138.50
8 8.625 10.5 345.00 513.00 201.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
† Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.
WWW.VICTAULIC.COM PL2013-FP32
Couplings, Spare Parts and FittingsSE
CTI
On
3
CO
UPLI
nG
S, S
PAR
E P
AR
TS,
An
D F
ITTI
nG
S
Style 77 Standard Flexible Coupling
Standard Coupling
STYLE 77Refer to publication 06.04
See Victaulicpublication 10.01
for details.
STYLE 77 – GRADE “E” OR “T” GASkET OR FLUSHSEAL GASkET
PIPEAprx.
Wgt. Ea.
COUPLING COMPLETE † With Grade “E” or “T”
Gasket
COUPLING COMPLETE † With FlushSeal®
“E” or “T” Gasket SPARE PARTS
Inches
Lbs
Price Each Price Each Plated Bolt & Nut
Nom. Size
Outside Dia. Painted Galv. Painted Galv. No.*
Size § Inches
C\v 1.050 1.1 $41.50 $55.50 $65.00 $80.00 2 C\, x 2
1 1.315 1.2 41.50 55.50 65.00 80.00 2 C\, x 2
1Z\v 1.660 2.0 54.50 73.00 80.00 99.00 2 Z\x x 2Z\x
1Z\x 1.900 2.1 59.50 77.50 83.50 103.50 2 Z\x x 2Z\x
2 2.375 2.6 63.50 84.00 87.50 109.50 2 Z\x x 2Z\x
2Z\x 2.875 3.1 74.00 103.50 106.50 135.50 2 Z\x x 2C\v
3 3.500 3.7 82.50 114.00 110.00 142.50 2 Z\x x 2C\v
3Z\x 4.000 5.6 117.50 165.50 158.50 208.00 2 B\, x 3Z\v
4 4.500 6.7 118.50 167.50 159.00 208.00 2 B\, x 3Z\v
5 5.563 10.5 179.50 258.00 277.50 360.50 2 C\v x 4Z\v
6 6.625 12.0 212.50 304.50 308.00 404.00 2 C\v x 4Z\v
8 8.625 20.8 345.00 513.00 415.50 569.50 2 M\, x 5
10 10.750 31.1 562.00 805.50 667.00 896.50 2 1 x 6
12 12.750 27.8 639.00 915.00 783.00 1031.00 2 1 x 6Z\x
* Number of bolts equals number of segments supplied.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
† Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.
§ Metric thread size bolts available. Contact Victaulic.
NOTE: See Spare Parts Section for spare part prices.
Style 75 Flexible Coupling
Flexible Coupling
STYLE 75Refer to publication 06.05
See Victaulicpublication 10.01
for details.
STYLE 75 – GRADE “E” OR “T” GASkET OR FLUSHSEAL GASkET
PIPEAprx.
Wgt. Ea.
COUPLING COMPLETE † With Grade “E” or “T”
Gasket
COUPLING COMPLETE † With FlushSeal®
“E” or “T” Gasket SPARE PARTS
Inches
Lbs
Price Each Price Each Plated Bolt & Nut
Nom. Size
Outside Dia. Painted Galv. Painted Galv.
Size § Inches
1 1.315 1.3 $42.00 $52.50 $67.00 $78.50 C\, x 2
1Z\v 1.660 1.4 43.00 55.50 70.00 83.50 C\, x 2
1Z\x 1.900 1.5 52.50 65.00 76.50 91.50 C\, x 2
2 2.375 1.8 63.50 84.00 78.50 94.00 C\, x 2
2Z\x 2.875 1.9 74.00 103.50 94.00 110.50 C\, x 2
3 3.500 2.9 82.50 114.00 99.50 119.50 Z\x x 2C\v
4 4.500 4.1 118.50 167.50 141.50 173.50 Z\x x 2C\v
5 5.563 5.8 179.50 258.00 241.50 287.50 B\, x 3Z\v
6 6.625 7.0 212.50 304.50 266.50 323.50 B\, x 3Z\v
8 8.625 12.9 345.00 513.00 443.50 531.50 C\v x 4Z\v
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
† Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.
§ Metric thread size bolts available. Contact Victaulic.
NOTE: See Spare Parts Section for spare part prices.
33
Couplings, Spare Parts and Fittings
WWW.VICTAULIC.COM PL2013-FP
SECTIO
n 3
C
OU
PLIn
GS, S
PAR
E PA
RTS, A
nD
FITTInG
S
Style 750 Reducing Coupling
Reducing Coupling
STYLE 750Refer to publication 06.08
See Victaulicpublication 10.01
for details.
STYLE 750 – GRADE “E” OR “T” GASkET
PIPEAprx
Wgt. Ea.COUPLING COMPLETE †
With Grade “E” or “T” Gasket SPARE PARTS
Nominal Size
Lbs
Price Each Plated Bolt & Nut
Inches Painted Galv.Size § Inches
2 x 1 2.0 $104.50 $125.50 C\, x 2
1Z\x 2.0 84.50 102.00 C\, x 2
2Z\x x 2 2.9 109.50 137.00 C\, x 2
3 x 2 4.6 124.50 157.00 Z\x x 2C\v
2Z\x 4.1 108.00 137.00 Z\x x 2C\v
4 x 2 8.8 196.50 247.50 B\, x 3Z\v
2Z\x 8.3 176.50 232.00 B\, x 3Z\v
3 6.4 165.50 213.50 B\, x 3Z\v
5 x 4 10.8 222.00 291.00 C\v x 4Z\v
6 x 4 16.1 334.00 421.00 C\v x 4Z\v
5 12.6 293.00 379.50 C\v x 4Z\v
8 x 6 22.3 500.00 632.00 M\, x 5
10 x 8 32.0 640.50 811.50 1 x 6
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
† Surcharge for couplings supplied without gasket. Contact Victaulic for pricing.
§ Metric thread size bolts available. Contact Victaulic.
Support rings required on vertical installations. Please specify on order.
NOTE: See Spare Parts Section for spare part prices.
WWW.VICTAULIC.COM PL2013-FP34
Couplings, Spare Parts and FittingsSE
CTI
On
3
CO
UPLI
nG
S, S
PAR
E P
AR
TS,
An
D F
ITTI
nG
S
Lubricant
Lubricant LUBRICANT Price Each
PACK With 12 Tubes – 4Z\x oz. Each $313.00
CONTAINER One Quart – Container 136.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
To ensure easy assembly and service of all your Victaulic installations, be sure to include plenty of Victaulic Lubricant with every order. The following chart provides a rough gauge of quantities recommended, based on the number of units sold.
LUBRICANT USAGE GUIDE
Size of Gasket Inches
Number of Gaskets Size of Gasket Inches
Number of Gaskets Size of Gasket Inches
Number of Gaskets
Per Tube Per Quart Per Tube Per Quart Per Tube Per Quart
2 55 400 8 13 100 16 6 45
3 36 270 10 11 80 18 5 35
4 26 200 12 8 60 20 4 30
6 17 125 14 7 50 24 3 20
NOTE: Victaulic lubricant is not recommended for use with HDPE pipe.
Gaskets
Gaskets GASkETS FOR STYLES 07, 75, 77 COUPLInGS
Nom. Size Standard Gaskets
Inches
Grade “E” EPDM or
Grade “T” Nitrile
FlushSeal Grade “E” or “T”
C\v $30.50 $57.00
1 30.50 57.00
1Z\v 32.00 60.50
1Z\x 34.00 61.50
2 34.00 62.50
2Z\x 40.00 76.50
3 43.00 76.50
3Z\x 54.00 99.00
5 69.50 180.50
6 75.00 185.00
8 102.50 191.50
10 128.50 246.50
12 149.50 293.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
35
Couplings, Spare Parts and Fittings
WWW.VICTAULIC.COM PL2013-FP
SECTIO
n 3
C
OU
PLIn
GS, S
PAR
E PA
RTS, A
nD
FITTInG
S
SILICOnE GASkETS FOR STYLES 07, 75, 77 COUPLInGS
Nom. Size Inches
Grade “L” Silicone
C\v $107.00
1 107.00
1Z\v 153.50
1Z\x 160.50
2 99.00
2Z\x 115.00
3 124.00
3Z\x +
4 180.00
4Z\x +
5 353.50
6 387.50
8 432.50
10 562.00
12 664.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
Gaskets
NOTE: For pricing couplings complete with any special gaskets - take the standard cou-pling price with Grade “E” or “T” gasket complete (Victaulic Main Price List), sub-tract the standard gasket price, then add on the price of the special gasket. Gasket recommendations can be found in the latest Victaulic Gasket Selection Guide (publication 05.01). This information is general in scope and Victaulic should be consulted for recommendations when a question arises.
STAnDARD “E” OR “T” GASkETS FOR STYLE 750
Nom. Size Inches Price Each
Run x Brch. Grade “E” or “T”
2 x 1 $32.00
1Z\x 32.00
2Z\x x 2 41.50
3 x 2 47.00
2Z\x 47.00
4 x 2 54.50
2Z\x 55.00
3 57.00
5 x 4 66.50
6 x 4 75.50
5 82.50
8 x 6 91.50
10 x 8 110.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Metal Liners
Metal Liners
STYLES 77 AnD 75 COUPLInGS
(Type 304 Stainless Steel)
STYLES 77 AnD 75 COUPLInGS
Nom. Size Inches Price Each
2 +
2Z\x +
3 +
4 +
5 +
6 +
8 +
10 +
Nom. Size Inches Price Each
12 +
14 +
16 +
18 +
20 +
24 +
28 +
30 +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
WWW.VICTAULIC.COM PL2013-FP36
Couplings, Spare Parts and FittingsSE
CTI
On
3
CO
UPLI
nG
S, S
PAR
E P
AR
TS,
An
D F
ITTI
nG
S
Plated Trackhead Bolts and Nuts
Plated Trackhead Bolts and Nuts
PLATED TRACkHEAD BOLTS AnD nUTS
Bolt and Nut Size Inches Price Each
C\, x 2 $15.50
Z\x x 2Z\x 16.00
2C\v 16.00
3 16.00
3Z\v 16.00
B\, x 2C\v 19.00
3Z\v 19.00
3Z\x 20.50
4 25.50
5 32.00
C\v x 4Z\v 22.50
5 30.00
M\, x 5 39.50
5Z\x 45.50
6Z\x 49.50
Bolt and Nut Size Inches Price Each
1 x 3Z\x $43.00
5 40.00
5Z\x 49.50
6 49.50
6Z\x 52.50
1Z\, x 4 67.00
5Z\x 67.00
1Z\v x 3Z\x 67.00
5Z\x 195.50
1C\, x 5C\v 228.00
1Z\x x 4Z\x 216.50
5C\v 244.00
1C\v x 6 427.00
1M\, x 6 565.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Go-No-Go Pipe Tape
Go-No-Go Tape Item Part No. Price Each Price Per Box *
Go-No-Go Tape (1) # RW75-100-MCH $62.00 –
Go-No-Go Tape (Box of 6) # RW75-100-KIT – $340.00
* Each box contains 6 Go-No-Go Tapes.
# Tool discount applies.
37
Couplings, Spare Parts and Fittings
WWW.VICTAULIC.COM PL2013-FP
SECTIO
n 3
C
OU
PLIn
GS, S
PAR
E PA
RTS, A
nD
FITTInG
S
Elbows –No. 12 - 22Z\x°, No. 13 - 11Z\v°
Grooved IPS Pipe Fittings
ElbowsRefer to publication 07.01
nO. 12 STAnDARD & GOOSEnECk
nO. 13
ELBOWS – 22Z\x° ELBOW OR 11Z\v° ELBOW
Nom. Size 22Z\x° Elbow No. 12 11Z\v° Elbow No. 13
Inches
Aprx. Wgt. Ea.
LbsC - E
Inches
Price Each Aprx. Wgt. Ea.
LbsC - E
Inches
Price Each
Painted Galv. Painted Galv.
1 0.6 ‡ 3.25 $473.00 $489.00 0.3 (sw) 1.38 $188.50 +
1Z\v 0.8 1.75 82.00 103.50 0.5 1.38 82.00 $103.50
1Z\x 0.8 1.75 82.00 103.50 0.5 1.38 82.00 103.50
2 1.4 ‡ 3.75 82.00 103.50 1.0 1.38 188.50 220.00
2Z\x 1.5 ‡ 4.00 82.00 103.50 1.5 1.50 188.50 220.00
3 3.1 ‡ 4.50 117.50 147.50 2.1 1.50 117.50 146.50
3Z\x 4.0 (sw) 2.50 275.00 368.00 2.7 (sw) 1.75 275.00 324.50
4 5.6 2.88 155.50 201.50 3.6 1.75 144.00 191.00
5 7.8 (sw) 2.88 476.00 574.00 5.0 (sw) 2.00 476.00 560.00
6 12.2 ‡ 6.25 435.50 554.50 7.0 2.00 435.50 526.00
8 20.0 ‡ 7.75 907.50 1127.00 10.1 2.00 775.00 921.50
10 30.0 4.38 1197.00 1554.50 11.8 2.13 1117.50 1334.00
12 40.0 4.88 1617.50 2006.00 29.3 2.25 1617.50 1959.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
(sw) Victaulic fittings are made of ductile iron, except those marked (sw) segmentally welded steel.
‡ Gooseneck design.
No. 100 and No. 110 1Z\x D Long Radius Elbows
Long Radius - 1Z\x D ElbowsRefer to publication 07.01
nO. 100
nO. 110
LOnG RADIUS – 90° LOnG RADIUS ELBOW OR 45° LOnG RADIUS ELBOW
Nom. Size 90° Long Rad. Elbow No. 100 * 45° Long Rad. Elbow No. 110 *
Inches
Aprx. Wgt. Ea.
LbsC - E
Inches
Price Each Aprx. Wgt. Ea.
LbsC - E
Inches
Price Each
Painted Galv. Painted Galv.
2 2.5 4.38 $170.00 $223.00 1.8 2.75 $147.50 $187.00
2Z\x 4.1 5.13 213.00 244.50 2.8 3.13 472.00 531.00
3 6.0 5.88 170.00 223.00 4.9 3.38 147.50 187.00
4 12.3 7.50 253.00 338.50 7.3 4.00 179.50 238.50
5 (s) 18.2 9.25 1284.00 1471.00 14.8 4.88 1192.50 1308.50
6 30.4 10.75 735.00 965.00 17.4 5.50 527.00 675.50
8 66.0 14.25 1756.00 2245.00 36.0 7.25 916.00 1191.00
10 107.0 15.00 3502.00 4221.00 57.0 6.25 2626.50 2995.50
12 156.0 18.00 3538.00 4695.50 90.0 7.50 3041.50 3734.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
(s) steel. Victaulic fittings are made of ductile iron, except those marked (s)
WWW.VICTAULIC.COM PL2013-FP38
Couplings, Spare Parts and FittingsSE
CTI
On
3
CO
UPLI
nG
S, S
PAR
E P
AR
TS,
An
D F
ITTI
nG
S
No. 29M Tee with Threaded Branch
TeeRefer to publication 07.01
nO. 29M
TEE WITH THREADED BRAnCH
Nom. SizeAprx.
Wgt. Ea.
Tee with Male Threaded Branch No. 29M
Inches Lbs
Price Each
Painted Galv.
C\v 0.6 + +
1 1.0 – –
1Z\v 1.5 $243.50 $286.00
1Z\x 2.0 379.50 447.00
2 3.0 243.50 286.00
3Z\x 7.9 (sw) + +
4 11.9 503.50 692.50
5 17.8 1447.00 +
6 25.7 1292.00 1520.50
8 47.6 + +
10 73.0 + +
12 99.0 + +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
(sw) Victaulic fittings are made of ductile iron, except those marked (sw) segmentally welded steel.
No. 35 Cross, No. 33 True Y
Cross and WyeRefer to publication 07.01
nO. 35
nO. 33
CROSS AnD WYE – STEEL CROSS OR STEEL 90 TRUE Y
Nom. SizeSteel Cross (sw)
No. 35Steel 90 True Y (sw)
No. 33
Inches
Aprx Wgt. Ea.
Lbs
Price Each Aprx Wgt. Ea.
Lbs
Price Each
Painted Galv. Painted Galv.
C\v 0.9 + + – – –
1 1.3 $280.50 $323.50 1.1 $430.00 +
1Z\v 2.1 337.50 392.50 1.5 430.00 +
1Z\x 2.5 363.00 421.50 1.8 430.00 $511.50
2 3.8 (d) 207.50 247.00 2.5 430.00 511.50
2Z\x 6.1 (d) 207.50 247.00 4.3 430.00 511.50
3 10.5 (d) 369.00 452.00 6.1 514.00 611.00
3Z\x 11.5 742.00 884.50 9.6 + +
4 15.8 (d) 612.00 753.00 10.0 673.00 809.00
4Z\x 18.5 + + – – –
5 20.0 1247.50 1503.50 15.0 963.00 1156.50
6 28.0 1601.00 1943.50 22.3 1189.00 1448.00
8 48.0 2109.50 2609.50 36.0 1712.50 2104.50
10 121.5 3460.50 4280.50 69.9 2843.50 3483.50
12 110.0 4993.50 6221.00 80.0 3140.50 3973.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
(d) Victaulic fittings listed above are made of segmentally welded steel, except those marked (d) ductile iron.
+ Quoted on application. Contact Victaulic for pricing and availability.
39
Couplings, Spare Parts and Fittings
WWW.VICTAULIC.COM PL2013-FP
SECTIO
n 3
C
OU
PLIn
GS, S
PAR
E PA
RTS, A
nD
FITTInG
S
No(s). 40, 42, and 43 Adapter Nipples
Adapter Nipples ‡
Same prices apply for: No. 40 Grooved x Threaded No. 42 Grooved x Beveled No. 43 Grooved x GroovedRefer to publication 07.01
nO. 40
nO. 42
nO. 43
ADAPTER nIPPLES – GROOVED X THREADED, GROOVED X BEVELED, OR GROOVED X GROOVED
Nom. Size Price Per Length – Inches
Inches 3 4 6 8 10 12
C\v $45.50 $45.50 + + + +
1 45.50 45.50 $71.50 + + +
1Z\v 45.50 45.50 71.50 + + +
1Z\x 45.50 45.50 71.50 $83.00 $95.00 $109.00
2 45.50 45.50 71.50 83.00 95.00 109.00
2Z\x 52.50 52.50 95.50 95.50 111.50 127.00
3 63.50 63.50 103.00 124.00 145.00 165.00
4 104.00 104.00* 104.00 171.00 201.50 232.00
5 215.00* 215.00* 215.00 299.00 369.00 424.50
6 275.50 275.50* 275.50* 356.00 413.50 469.50
8 309.00* 309.00* 309.00* 410.50 563.50 633.00
10 399.00* 399.00* 401.50* 432.50 667.00 793.00
12 542.00* 542.00* 542.00* 542.00 844.00 1005.50
Special lengths not shown, heavier wall thickness, electroplated and galvanized nipples are priced on application.GALVANIZED AND EXTRA HEAVY ARE NON-CANCELLABLE AND NON-RETURNABLE ITEMS.‡ Contact Victaulic for pricing on seamless adapter nipples.
NOTE: Items listed in shaded areas are special order, non-cancellable and non-returnable items.
Unless otherwise specified, Adapter Nipples for nominal pipe sizes 6” and smaller are made from Schedule 40 pipe; for nominal sizes 8” and larger, from Schedule 30 pipe. NOTE: For Pump Package Nipples with 1 Z\x” hole cut to receive Style 923 Vic-Let or Style 924 Vic-O-Well add $106.50 to No. 40, 42 or 43 Nipple prices and request No. 40-H, 42-H or 43-H on order. No. 40-H, 42-H and 43-H are non-cancellable and non-returnable.* These sizes available only in No. 42 grooved x beveled and No. 43 grooved x grooved.
+ Quoted on application. Contact Victaulic for pricing and availability.
No. 80 Female Threaded Adapter
Female Threaded AdapterRefer to publication 07.01
nO. 80
FEMALE THREADED ADAPTER
Nom. SizeAprx.
Wgt. EachNo. 80
Price Each
Inches Lbs Painted Galv.
C\v 1.0 $387.50 $429.00
1 1.0 415.00 445.50
1Z\v 1.5 219.00 245.50
1Z\x 1.5 284.00 302.50
2 1.4 134.00 157.00
2Z\x 1.5 134.00 157.00
3 2.9 155.50 190.00
4 4.5 238.00 298.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Available with British Standard Pipe Threads (BSPT). Contact Victaulic for details.
WWW.VICTAULIC.COM PL2013-FP40
Couplings, Spare Parts and FittingsSE
CTI
On
3
CO
UPLI
nG
S, S
PAR
E P
AR
TS,
An
D F
ITTI
nG
S
No(s). 18 and 19 Adapter Elbows
Adapter ElbowsRefer to publication 07.01
nO. 18
nO. 19
ADAPTER ELBOWS – 90° ADAPTER ELBOW OR 45° ADAPTER ELBOW
Nom. Size 90° Adapter Elbow No. 18 45° Adapter Elbow No. 19
Inches
Aprx. Wgt. Ea.
Lbs
Price Each Aprx. Wgt. Ea.
Lbs
Price Each
Painted Galv. Painted Galv.
C\v 0.5 $193.50 $205.50 0.5 $196.50 $208.00
1 0.5 129.50 160.50 0.6 – –
1Z\v 0.9 145.00 160.50 0.6 – –
1Z\x 1.1 184.50 214.00 0.9 213.00 227.50
2 2.5 129.50 160.50 1.9 – –
2Z\x 3.0 224.50 245.50 2.3 219.00 226.50
3 5.8 208.00 255.00 5.0 374.00 401.00
6 17.6 644.00 814.50 12.7 783.50 870.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Available with British Standard Pipe Threads (BSPT). Contact Victaulic for details.
41
Couplings, Spare Parts and Fittings
WWW.VICTAULIC.COM PL2013-FP
SECTIO
n 3
C
OU
PLIn
GS, S
PAR
E PA
RTS, A
nD
FITTInG
S
No. 25 Grooved Reducing Tee
Reducing TeeRefer to publication 07.01
nO. 25
REDUCInG TEE
Size Reducing Tee No. 25
Inches Aprx. Wgt. Each
Lbs
Price Each
Run x Branch Painted Galv.
1 x 1 x C\v 1.0 $198.50 $233.00
1Z\v x 1Z\v x 1 1.3 205.00 233.00
1Z\x x 1Z\x x C\v 1.5 207.50 +
1 1.5 285.00 293.50
1Z\v 1.7 216.00 239.00
2 x 2 x C\v (d) 2.5 268.50 316.50
1 (d) 2.7 245.50 287.50
1Z\v 1.8 306.00 322.00
1Z\x (d) 3.0 245.50 292.00
2Z\x x 2Z\x x C\v 3.9 331.00 359.00
1 (d) 3.8 245.50 287.50
1Z\v 4.2 369.50 435.50
1Z\x (d) 3.9 245.50 292.00
2 (d) 4.5 245.50 292.00
3 x 3 x C\v (d) 5.7 382.00 398.00
1 (d) 6.1 216.50 276.50
1Z\v 8.0 304.00 402.00
1Z\x (d) 6.5 216.50 279.50
2 (d) 6.2 216.50 279.50
2Z\x (d) 6.4 216.50 279.50
4 x 4 x C\v (d) 8.0 487.50 521.50
1 (d) 7.8 292.00 364.50
1Z\v 9.6 574.00 668.50
1Z\x (d) 10.2 292.00 364.50
2 (d) 11.2 292.00 383.00
2Z\x (d) 11.4 292.00 383.00
3 (d) 11.6 292.00 383.00
5 x 5 x 1 14.0 642.50 791.50
1Z\x 14.3 816.50 884.50
2 14.5 707.50 874.00
2Z\x (d) 15.2 576.50 725.50
3 (d) 16.6 576.50 725.50
4 (d) 16.7 623.50 788.00
6 x 6 x 1 23.0 775.00 951.00
1Z\x 24.0 801.00 1097.00
2 (d) 21.6 686.50 901.50
2Z\x (d) 21.4 686.50 901.50
3 (d) 26.5 686.50 901.50
4 (d) 25.0 686.50 901.50
5 (d) 23.2 686.50 907.50
8 x 8 x 1Z\x 33.0 989.50 1204.50
2 33.5 989.50 1249.50
2Z\x 39.0 989.50 1249.50
3 33.6 1066.00 1274.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
(d) Victaulic fittings listed above are made of segmentally welded steel, except those marked (d) ductile iron.
WWW.VICTAULIC.COM PL2013-FP42
Couplings, Spare Parts and FittingsSE
CTI
On
3
CO
UPLI
nG
S, S
PAR
E P
AR
TS,
An
D F
ITTI
nG
S
Size Reducing Tee No. 25
Inches Aprx. Wgt. Each
Lbs
Price Each
Run x Branch Painted Galv.
8 x 8 x 4 (d) 41.8 $1430.50 $1848.00
5 34.0 1430.50 1860.50
6 (d) 42.3 1430.50 1868.50
10 x 10 x 1Z\x 62.0 2347.50 3143.50
2 62.0 1659.00 2518.50
2Z\x 62.4 1659.00 2091.50
3 60.0 1659.00 2640.00
4 61.0 1734.50 2217.00
5 52.0 1773.00 2263.00
6 59.0 1773.00 2878.50
8 64.7 1805.50 2892.50
12 x 12 x 1 77.0 2233.50 +
2 80.0 3357.50 4058.50
2Z\x 78.0 2233.50 +
3 82.0 2233.50 2883.00
4 80.0 2393.00 3366.00
5 75.0 2530.00 3286.00
6 75.0 2560.50 3756.00
8 80.0 2631.50 3979.50
10 84.0 2754.50 4283.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
(d) Victaulic fittings listed above are made of segmentally welded steel, except those marked (d) ductile iron.
43
Couplings, Spare Parts and Fittings
WWW.VICTAULIC.COM PL2013-FP
SECTIO
n 3
C
OU
PLIn
GS, S
PAR
E PA
RTS, A
nD
FITTInG
S
No. 29T Threaded Reducing Tee
Reducing Tee with Threaded BranchRefer to publication 07.01
nO. 29T
REDUCInG TEE WITH THREADED BRAnCH *
Size Reducing Tee No. 29T with Threaded Branch
Inches Aprx. Wgt. Each
Lbs
Price Each
Run x Branch Painted Galv.
2 x 2 x C\v (d) 2.5 $284.50 $334.00
1 (d) 2.7 259.00 304.00
1Z\v 2.9 436.00 466.00
1Z\x (d) 3.0 259.00 308.00
2Z\x x 2Z\x x C\v 3.5 509.00 525.00
1 (d) 3.8 259.00 304.00
1Z\v 3.8 566.00 582.00
1Z\x (d) 3.9 259.00 308.00
2 4.5 259.00 310.50
3 x 3 x C\v 5.9 475.50 504.50
1 (d) 6.1 259.00 324.00
1Z\v 6.3 639.00 679.50
1Z\x (d) 6.5 259.00 326.00
2 (d) 6.2 259.00 326.00
2Z\x (d) 6.4 624.50 676.00
4 x 4 x C\v 7.2 689.50 849.00
1 (d) 7.8 324.00 399.00
1Z\v 8.5 665.50 717.00
1Z\x (d) 9.2 324.00 406.00
2 (d) 11.2 324.00 406.00
2Z\x (d) 11.4 324.00 417.50
3 (d) 11.6 324.00 419.00
5 x 5 x 2 14.5 693.00 755.00
2Z\x (d) 15.2 623.00 789.00
3 16.6 576.50 725.50
4 16.7 623.00 849.00
6 x 6 x 1 23.0 945.50 1099.00
1Z\x 25.0 836.50 1052.00
2 (d) 21.6 808.50 1007.00
2Z\x (d) 21.4 808.50 1007.00
3 (d) 26.5 808.50 1007.00
4 (d) 25.0 1022.00 1099.00
5 23.2 808.50 1007.00
8 x 8 x 2 33.5 989.50 1365.00
3 33.6 1365.00 1770.00
4 (d) 41.8 1430.50 1848.00
5 34.0 1430.50 1859.50
6 (d) 42.3 1582.00 2173.50
10 x 10 x 2 62.0 1658.50 2423.00
3 60.0 1658.50 2057.50
4 61.0 1734.50 2217.00
5 52.0 1525.00 2263.00
6 59.0 1773.00 2293.00
8 64.7 2391.50 2673.00
12
x
12
x 3 80.0 2233.50 2883.50
4 82.0 2393.00 3073.50
5 75.0 2530.00 3286.00
6 75.0 2560.50 3316.50
8 80.0 2632.00 3393.50
10 84.0 2754.50 3398.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
(d) Victaulic fittings listed above are made of segmentally welded steel, except those marked (d) ductile iron.
Available with British Standard Pipe Threads (BSPT). Contact Victaulic for details.
WWW.VICTAULIC.COM PL2013-FP44
Couplings, Spare Parts and FittingsSE
CTI
On
3
CO
UPLI
nG
S, S
PAR
E P
AR
TS,
An
D F
ITTI
nG
S
No. 50 Concentrc Reducers, No. 51 Eccentric Reducers
ReducersRefer to publication 07.01
nO. 50
nO. 51
REDUCERS – COnCEnTRIC OR ECCEnTRIC *
Size Concentric Reducer No. 50 Eccentric Reducer No. 51
Inches
Aprx. Wgt. Ea.
Lbs
Price Each Aprx. Wgt. Ea.
Lbs
Price Each
Painted Galv. Painted Galv.
1Z\v x C\v 1.9 $337.50 $369.50 3.2 + +
1 1.9 353.00 388.50 3.2 + +
1Z\x x C\v 1.4 397.50 429.50 4.5 + +
1 0.8 (d) 88.00 103.00 4.5 $372.50 $436.00
1Z\v 1.0 (d) 88.00 103.00 4.5 364.00 +
2 x C\v 0.9 (d) 88.00 103.00 2.0 410.50 +
1 0.7 (d) 88.00 103.00 2.3 410.50 460.50
1Z\v 1.2 (d) 95.50 112.50 4.6 448.50 +
1Z\x 1.0 (d) 88.00 103.00 4.6 91.50 108.50
2Z\x x C\v 1.3 692.00 746.00 3.3 1039.00 1171.00
1 3.3 119.00 137.50 3.5 967.50 1071.50
1Z\v 3.3 (d) 88.00 103.00 3.5 97.50 113.00
1Z\x 3.6 (d) 88.00 103.00 3.7 447.50 511.50
2 3.9 (d) 88.00 103.00 4.3 (d) 183.00 248.50
3 x C\v 1.5 695.50 778.00 4.8 + +
1 1.3 (d) 95.50 117.00 4.8 1038.50 1142.50
1Z\v 3.0 153.50 177.00 4.8 940.00 +
1Z\x 5.1 (d) 105.50 128.50 5.1 516.50 604.00
2 1.6 (d) 77.50 94.50 6.0 (d) 208.50 285.00
2Z\x 1.6 (d) 105.50 127.50 7.0 (d) 208.50 292.00
3Z\x x 3 2.0 (d) 112.00 135.50 7.0 1140.50 +
4 x 1 2.4 (d) 116.50 142.50 6.5 2102.00 +
1Z\v 4.6 889.50 996.50 – – –
1Z\x 6.9 (d) 160.50 212.00 8.1 1271.50 1373.00
2 2.4 (d) 103.00 126.50 8.0 (d) 254.50 355.00
2Z\x 2.7 (d) 127.50 155.00 7.6 (d) 254.50 355.00
3 2.5 (d) 127.50 155.00 7.8 (d) 254.50 355.00
3Z\x 2.9 (d) 127.50 155.00 8.0 1779.50 +
5 x 2 9.0 1251.50 1382.00 5.2 1402.00 +
2Z\x 11.0 259.00 316.00 10.8 1195.00 +
3 4.9 (d) 147.50 183.00 11.1 1155.00 1287.00
4 4.3 (d) 176.00 220.00 12.0 (d) 346.00 487.50
6 x 1 5.0 (d) 233.00 290.50 14.5 2177.00 2364.00
1Z\x 5.5 + + + + +
2 6.6 (d) 233.00 290.50 14.5 1986.00 2162.50
2Z\x 14.2 (d) 259.00 318.50 14.2 2364.00 2574.00
3 6.4 (d) 233.00 290.50 15.0 (d) 459.00 644.00
4 6.5 (d) 204.00 263.50 17.0 (d) 402.50 591.00
5 6.4 (d) 300.50 373.00 17.0 (d) 482.50 684.00
8 x 3 9.3 (d) 415.00 516.50 22.0 2306.50 2512.00
4 10.4 (d) 415.00 519.50 23.0 2017.00 2301.00
5 11.6 (d) 415.00 523.00 23.0 2017.00 2301.00
6 11.9 (d) 526.50 659.50 24.0 (d) 812.00 1105.50
10 x 4 19.7 (d) 945.00 1163.50 32.0 3561.00 4270.50
5 36.3 2079.50 2372.50 34.0 3354.00 3947.50
6 20.0 (d) 1033.50 1288.50 36.9 2530.00 2999.00
8 22.1 (d) 1033.50 1310.50 40.3 2142.00 2663.50
12 x 4 44.0 4524.50 5385.00 48.0 3740.00 +
6 24.6 (d) 1232.50 1523.50 50.0 3379.50 4070.00
8 52.0 (d) 1849.00 2183.50 53.5 3293.50 3941.00
10 38.0 (d) 1849.00 2289.00 57.0 2949.00 3497.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
(d) Victaulic fittings listed above are made of segmentally welded steel, except those marked (d) ductile iron.
45
Couplings, Spare Parts and Fittings
WWW.VICTAULIC.COM PL2013-FP
SECTIO
n 3
C
OU
PLIn
GS, S
PAR
E PA
RTS, A
nD
FITTInG
S
No. 52 Reducer – Male Threaded Small End
Reducer - Male Threaded Small EndRefer to publication 07.01
nO. 52
REDUCER – MALE THREADED SMALL EnD
Nominal Size
Aprx. Wgt. Ea. Price Each
Inches Inlet x Outlet Lbs Painted Galv.
1Z\x x 1 0.8 $91.50 $112.00
1Z\v 0.8 95.50 112.50
2 x C\v 0.9 91.50 112.00
1 0.7 91.50 112.00
1Z\v 1.2 91.50 112.00
1Z\x 1.0 91.50 112.00
2Z\x x 1 1.0 123.50 142.00
1Z\v 1.2 129.50 159.50
1Z\x 1.3 135.50 159.50
2 1.4 91.50 112.00
3 x C\v (s) 1.2 655.00 697.00
1 1.3 99.50 119.50
1Z\x 1.5 112.00 134.00
2 1.5 112.00 134.00
2Z\x 1.7 135.50 159.50
4 x 1 2.3 128.00 155.00
1Z\x (s) 2.5 299.50 391.50
2 2.6 136.50 163.00
2Z\x 2.6 137.00 168.00
3 2.5 167.50 198.00
5 x 4 (s) 4.5 948.50 1032.00
6 x 1 5.5 259.00 318.50
2 5.7 259.00 318.50
2Z\x 5.8 259.00 318.50
3 5.8 259.00 318.50
4 (s) 6.5 1557.50 1725.50
5 (s) 17.5 + +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
(s) steel. Victaulic fittings are made of ductile iron, except those marked (s)
+ Quoted on application. Contact Victaulic for pricing and availability.
Available with British Standard Pipe Threads (BSPT). Contact Victaulic for details.
WWW.VICTAULIC.COM PL2013-FP46
Couplings, Spare Parts and FittingsSE
CTI
On
3
CO
UPLI
nG
S, S
PAR
E P
AR
TS,
An
D F
ITTI
nG
S
SECTION 4 – VicFlex™ Stainless Steel Sprinkler Fittings
VicFlex™ Sprinkler Fitting Systems
47WWW.VICTAULIC.COM PL2013-FP
Series AQB Flexible Sprinkler Fitting Assembly – with Series AH2 Hose and Style AB1 Bracket
Series AQB Series AH2 Hose with Style AB1 Bracket
FLEXIBLE SPRInkLER FITTInG ASSEMBLY WITH BRAIDED HOSE AnD InSTALLATIOn-READY BRACkET Z\x” OR C\v” REDUCER OUTLET FOR SPRInkLERRefer to publication 10.85
SERIES AQB SERIES AH2 HOSE WITH 24” STYLE AB1 BRACkET
Size Aprx. Wgt. Ea. Victaulic Box Price Each
Inches Lbs. Part No. Quantity
31 x Z\x 3.7 A31HAQB212 10 $97.00
C\v 3.7 A31TAQB212 10 97.00
36 x Z\x 3.9 A36HAQB212 10 100.50
C\v 3.9 A36TAQB212 10 100.50
48 x Z\x 4.3 A48HAQB212 10 105.50
C\v 4.3 A48TAQB212 10 105.50
60 x Z\x 4.7 A60HAQB212 10 116.50
C\v 4.7 A60TAQB212 10 116.50
72 x Z\x 5.1 A72HAQB212 10 128.00
C\v 5.1 A72TAQB212 10 128.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
SERIES AQB SERIES AH2 HOSE WITH 48” STYLE AB1 BRACkET
Size Aprx. Wgt. Ea. Victaulic Box Price Each
Inches Lbs. Part No. Quantity
31 x Z\x 4.5 A31HAQB214 10 $104.00
C\v 4.5 A31TAQB214 10 104.00
36 x Z\x 4.7 A36HAQB214 10 108.50
C\v 4.7 A36TAQB214 10 108.50
48 x Z\x 5.1 A48HAQB214 10 113.00
C\v 5.1 A48TAQB214 10 113.00
60 x Z\x 5.5 A60HAQB214 10 124.00
C\v 5.5 A60TAQB214 10 124.00
72 x Z\x 5.9 A72HAQB214 10 135.00
C\v 5.9 A72TAQB214 10 135.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
WWW.VICTAULIC.COM PL2013-FP48
VicFlex™ Sprinkler Fitting SystemsSE
CTI
On
4
VICFL
EX
STA
InLE
SS
STE
EL S
PR
Ink
LER
FIT
TIn
GS
Series AQB Flexible Sprinkler Fitting Assembly – with Series AH2 Hose and Style AB2 Bracket
Series AQB Series AH2 Hose with Style AB2 Bracket
FLEXIBLE SPRInkLER FITTInG ASSEMBLY WITH BRAIDED HOSE AnD BRACkET WITH ELBOW-CEILInG ADJUSTABILITY Z\x” OR C\v” REDUCER OUTLET FOR SPRInkLERRefer to publication 10.85
SERIES AQB SERIES AH2 HOSE WITH 24” STYLE AB2 BRACkET
Size Aprx. Wgt. Ea. Victaulic Box Price Each
Inches Lbs. Part No. Quantity
31 x Z\x 3.8 A31HAQB222 10 $111.50
C\v 3.8 A31TAQB222 10 111.50
36 x Z\x 4.0 A36HAQB222 10 116.00
C\v 4.0 A36TAQB222 10 116.00
48 x Z\x 4.4 A48HAQB222 10 121.50
C\v 4.4 A48TAQB222 10 121.50
60 x Z\x 4.8 A60HAQB222 10 133.50
C\v 4.8 A60TAQB222 10 133.50
72 x Z\x 5.2 A72HAQB222 10 147.50
C\v 5.2 A72TAQB222 10 147.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
SERIES AQB SERIES AH2 HOSE WITH 48” STYLE AB2 BRACkET
Size Aprx. Wgt. Ea. Victaulic Box Price Each
Inches Lbs. Part No. Quantity
31 x Z\x 4.6 A31HAQB224 10 $120.00
C\v 4.6 A31TAQB224 10 120.00
36 x Z\x 4.8 A36HAQB224 10 124.50
C\v 4.8 A36TAQB224 10 124.50
48 x Z\x 5.2 A48HAQB224 10 130.00
C\v 5.2 A48TAQB224 10 130.00
60 x Z\x 5.6 A60HAQB224 10 143.00
C\v 5.6 A60TAQB224 10 143.00
72 x Z\x 6.0 A72HAQB224 10 155.50
C\v 6.0 A72TAQB224 10 155.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
49WWW.VICTAULIC.COM PL2013-FP
VicFlex™ Sprinkler Fitting Systems SEC
TIOn
4
VICFLE
X STA
InLE
SS
STEEL S
PR
Ink
LER FITTIn
GS
Series AQB Flexible Sprinkler Fitting Assembly – with Series AH2 Hose and Style AB4 Bracket
Series AQB Series AH2 Hose with Style AB4 Bracket
FLEXIBLE SPRInkLER FITTInG ASSEMBLY WITH BRAIDED HOSE AnD BRACkET FOR HAT FURRInG CHAnnEL WITH BELOW-CEILInG ADJUSTABILITY Z\x” OR C\v” REDUCER OUTLET FOR SPRInkLERRefer to publication 10.85
SERIES AQB SERIES AH2 HOSE WITH 24” STYLE AB4 BRACkET
Size Aprx. Wgt. Ea. Victaulic Box Price Each
Inches Lbs. Part No. Quantity
31 x Z\x 3.7 A31HAQB242 10 $110.50
C\v 3.7 A31TAQB242 10 110.50
36 x Z\x 3.9 A36HAQB242 10 115.00
C\v 3.9 A36TAQB242 10 115.00
48 x Z\x 4.2 A48HAQB242 10 119.00
C\v 4.2 A48TAQB242 10 119.00
60 x Z\x 4.4 A60HAQB242 10 129.00
C\v 4.4 A60TAQB242 10 129.00
72 x Z\x 4.5 A72HAQB242 10 139.00
C\v 4.5 A72TAQB242 10 139.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
SERIES AQB SERIES AH2 HOSE WITH 48” STYLE AB4 BRACkET
Size Aprx. Wgt. Ea. Victaulic Box Price Each
Inches Lbs. Part No. Quantity
31 x Z\x 4.3 A31HAQB244 10 $119.00
C\v 4.3 A31TAQB244 10 119.00
36 x Z\x 4.5 A36HAQB244 10 124.00
C\v 4.5 A36TAQB244 10 124.00
48 x Z\x 4.8 A48HAQB244 10 128.00
C\v 4.8 A48TAQB244 10 128.00
60 x Z\x 5.0 A60HAQB244 10 138.50
C\v 5.0 A60TAQB244 10 138.50
72 x Z\x 5.1 A72HAQB244 10 147.00
C\v 5.1 A72TAQB244 10 147.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
WWW.VICTAULIC.COM PL2013-FP50
VicFlex™ Sprinkler Fitting SystemsSE
CTI
On
4
VICFL
EX
STA
InLE
SS
STE
EL S
PR
Ink
LER
FIT
TIn
GS
Series AQB Flexible Sprinkler Fitting Assembly – with Series AH2 Hose and Style AB10 Bracket
Series AQB Series AH2 Hose with Style AB10 Bracket
FLEXIBLE SPRInkLER FITTInG ASSEMBLY WITH BRAIDED HOSE AnD BRACkET FOR ARMSTROnG® TECHZOnE™ SYSTEM WITH BELOW-CEILInG ADJUSTABILITY Z\x” OR C\v” REDUCER OUTLET FOR SPRInkLERRefer to publication 10.85
SERIES AQB SERIES AH2 HOSE WITH 4” STYLE AB10 BRACkET
Size Aprx. Wgt. Ea. Victaulic Box Price Each
Inches Lbs. Part No. Quantity
31 x Z\x 3.0 A31HB104H2 10 $97.00
C\v 3.0 A31TB104H2 10 97.00
36 x Z\x 3.2 A36HB104H2 10 100.50
C\v 3.2 A36TB104H2 10 100.50
48 x Z\x 3.6 A48HB104H2 10 105.50
C\v 3.6 A48TB104H2 10 105.50
60 x Z\x 4.0 A60HB104H2 10 116.50
C\v 4.0 A60TB104H2 10 116.50
72 x Z\x 4.4 A72HB104H2 10 128.00
C\v 4.4 A72TB104H2 10 128.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
SERIES AQB SERIES AH2 HOSE WITH 6” STYLE AB10 BRACkET
Size Aprx. Wgt. Ea. Victaulic Box Price Each
Inches Lbs. Part No. Quantity
31 x Z\x 3.1 A31HB106H2 10 $104.00
C\v 3.1 A31TB106H2 10 104.00
36 x Z\x 3.3 A36HB106H2 10 108.50
C\v 3.3 A36TB106H2 10 108.50
48 x Z\x 3.7 A48HB106H2 10 113.00
C\v 3.7 A48TB106H2 10 113.00
60 x Z\x 4.1 A60HB106H2 10 124.00
C\v 4.1 A60TB106H2 10 124.00
72 x Z\x 4.5 A72HB106H2 10 135.00
C\v 4.5 A72TB106H2 10 135.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
51
VicFlex™ Sprinkler Fitting Systems
WWW.VICTAULIC.COM PL2013-FP
SECTIO
n 4
VIC
FLEX S
TAIn
LES
S S
TEEL SPR
Ink
LER FITTIn
GS
Series AQB Flexible Sprinkler Fitting Assembly – with Series AH4 Hose and Style AB1 Bracket
Series AQB Series AH4 Hose with Style AB1 Bracket
FLEXIBLE SPRInkLER FITTInG ASSEMBLY WITH BRAIDED HOSE AnD InSTALLATIOn-READY BRACkET Z\x” OR C\v” REDUCER OUTLET FOR SPRInkLERRefer to publication 10.85
SERIES AQB SERIES AH4 HOSE WITH 24” STYLE AB1 BRACkET
Size Aprx. Wgt. Ea. Victaulic Box Price Each
Inches Lbs. Part No. Quantity
31 x Z\x 3.6 A31HAQB412 10 $89.00
C\v 3.6 A31TAQB412 10 89.00
36 x Z\x 3.7 A36HAQB412 10 92.50
C\v 3.7 A36TAQB412 10 92.50
48 x Z\x 4.1 A48HAQB412 10 97.50
C\v 4.1 A48TAQB412 10 97.50
60 x Z\x 4.5 A60HAQB412 10 107.50
C\v 4.5 A60TAQB412 10 107.50
72 x Z\x 4.9 A72HAQB412 10 117.50
C\v 4.9 A72TAQB412 10 117.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
SERIES AQB SERIES AH4 HOSE WITH 48” STYLE AB1 BRACkET
Size Aprx. Wgt. Ea. Victaulic Box Price Each
Inches Lbs. Part No. Quantity
31 x Z\x 4.4 A31HAQB414 10 $95.50
C\v 4.4 A31TAQB414 10 95.50
36 x Z\x 4.6 A36HAQB414 10 100.00
C\v 4.6 A36TAQB414 10 100.00
48 x Z\x 4.9 A48HAQB414 10 104.00
C\v 4.9 A48TAQB414 10 104.00
60 x Z\x 5.3 A60HAQB414 10 114.50
C\v 5.3 A60TAQB414 10 114.50
72 x Z\x 5.6 A72HAQB414 10 124.00
C\v 5.6 A72TAQB414 10 124.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
WWW.VICTAULIC.COM PL2013-FP52
VicFlex™ Sprinkler Fitting SystemsSE
CTI
On
4
VICFL
EX
STA
InLE
SS
STE
EL S
PR
Ink
LER
FIT
TIn
GS
Series AQB Flexible Sprinkler Fitting Assembly – with Series AH4 Hose and Style AB7 Bracket
Series AQB Series AH4 Hose with Style AB7 Bracket
FLEXIBLE SPRInkLER FITTInG ASSEMBLY WITH BRAIDED HOSE AnD BRACkET Z\x” OR C\v” REDUCERRefer to publication 10.85
SERIES AQB SERIES AH4 HOSE WITH 24” STYLE AB7 BRACkET
Size Aprx. Wgt. Ea. Victaulic Box Price Each
Inches Lbs. Part No. Quantity
31 x Z\x 3.5 A31HAQFBEB 10 $77.50
C\v 3.5 A31TAQFBEB 10 77.50
36 x Z\x 3.6 A36HAQFBEB 10 80.50
C\v 3.6 A36TAQFBEB 10 80.50
48 x Z\x 4.0 A48HAQFBEB 10 84.50
C\v 4.0 A48TAQFBEB 10 84.50
60 x Z\x 4.4 A60HAQFBEB 10 93.00
C\v 4.4 A60TAQFBEB 10 93.00
72 x Z\x 4.8 A72HAQFBEB 10 102.00
C\v 4.8 A72TAQFBEB 10 102.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
SERIES AQB SERIES AH4 HOSE WITH 48” STYLE AB7 BRACkET
Size Aprx. Wgt. Ea. Victaulic Box Price Each
Inches Lbs. Part No. Quantity
31 x Z\x 4.3 A31HAQFB48 10 $83.00
C\v 4.3 A31TAQFB48 10 83.00
36 x Z\x 4.5 A36HAQFB48 10 87.00
C\v 4.5 A36TAQFB48 10 87.00
48 x Z\x 4.8 A48HAQFB48 10 90.50
C\v 4.8 A48TAQFB48 10 90.50
60 x Z\x 5.2 A60HAQFB48 10 99.50
C\v 5.2 A60TAQFB48 10 99.50
72 x Z\x 5.5 A72HAQFB48 10 108.00
C\v 5.5 A72TAQFB48 10 108.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
53
VicFlex™ Sprinkler Fitting Systems
WWW.VICTAULIC.COM PL2013-FP
SECTIO
n 4
VIC
FLEX S
TAIn
LES
S S
TEEL SPR
Ink
LER FITTIn
GS
Series AQB Series AH4 Hose with Style AB9 Bracket
FLEXIBLE SPRInkLER FITTInG ASSEMBLY WITH BRAIDED HOSE AnD BRACkET FOR HAT FURRInG CHAnnEL GRID Z\x” OR C\v” REDUCER OUTLET FOR SPRInkLERRefer to publication 10.85
SERIES AQB SERIES AH4 HOSE WITH 24” STYLE AB9 BRACkET
Size Aprx. Wgt. Ea. Victaulic Box Price
Inches Lbs. Part No. Quantity Each
31 x Z\x 3.7 A31HAQFBHB 10 $95.50
C\v 3.7 A31TAQFBHB 10 95.50
36 x Z\x 4.0 A36HAQFBHB 10 100.00
C\v 4.0 A36TAQFBHB 10 100.00
48 x Z\x 4.3 A48HAQFBHB 10 103.50
C\v 4.3 A48TAQFBHB 10 103.50
60 x Z\x 4.7 A60HAQFBHB 10 112.00
C\v 4.7 A60TAQFBHB 10 112.00
72 x Z\x 5.1 A72HAQFBHB 10 120.50
C\v 5.1 A72TAQFBHB 10 120.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
SERIES AQB SERIES AH4 HOSE WITH 48” STYLE AB9 BRACkET
Size Aprx. Wgt. Ea. Victaulic Box Price Each
Inches Lbs. Part No. Quantity
31 x Z\x 4.3 A31HAQBHB8 10 $103.00
C\v 4.3 A31TAQBHB8 10 103.00
36 x Z\x 4.6 A36HAQBHB8 10 108.00
C\v 4.6 A36TAQBHB8 10 108.00
48 x Z\x 4.9 A48HAQBHB8 10 111.00
C\v 4.9 A48TAQBHB8 10 111.00
60 x Z\x 5.3 A60HAQBHB8 10 120.50
C\v 5.3 A60TAQBHB8 10 120.50
72 x Z\x 5.7 A72HAQBHB8 10 128.00
C\v 5.7 A72TAQBHB8 10 128.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
WWW.VICTAULIC.COM PL2013-FP54
VicFlex™ Sprinkler Fitting SystemsSE
CTI
On
4
VICFL
EX
STA
InLE
SS
STE
EL S
PR
Ink
LER
FIT
TIn
GS
Series AQU Flexible Sprinkler Fitting Assembly with Unbraided Hose – with Series AH5 Hose and Style AB7 Bracket
Series AQU Series AH5 Hose with Style AB7 Bracket
FLEXIBLE SPRInkLER FITTInG ASSEMBLY WITH UnBRAIDED HOSE AnD BRACkET Z\x” OR C\v” REDUCER OUTLET FOR SPRInkLERRefer to publication 10.89
SERIES AQU SERIES AH5 HOSE WITH 24” STYLE AB7 BRACkET
Size Aprx. Wgt. Ea. Victaulic Box Price
Inches Lbs. Part No. Quantity Each
31 x Z\x 3.2 A31HAQFBEE 10 $57.00
C\v 3.2 A31TAQFBEE 10 59.50
48 x Z\x 3.3 A48HAQFBEE 10 68.50
C\v 3.3 A48TAQFBEE 10 70.50
60 x Z\x 3.7 A60HAQFBEE 10 76.50
C\v 3.7 A60TAQFBEE 10 79.00
72 x Z\x 4.2 A72HAQFBEE 10 85.50
C\v 4.2 A72TAQFBEE 10 88.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
SERIES AQU SERIES AH5 HOSE WITH 48” STYLE AB7 BRACkET
Size Aprx. Wgt. Ea. Victaulic Box Price
Inches Lbs. Part No. Quantity Each
31 x Z\x 3.7 A31HAQFU48 10 $63.00
C\v 3.7 A31TAQFU48 10 66.00
48 x Z\x 3.8 A48HAQFU48 10 75.00
C\v 3.8 A48TAQFU48 10 77.50
60 x Z\x 4.3 A60HAQFU48 10 82.50
C\v 4.3 A60TAQFU48 10 85.00
72 x Z\x 4.7 A72HAQFU48 10 92.00
C\v 4.7 A72TAQFU48 10 94.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
55
VicFlex™ Sprinkler Fitting Systems
WWW.VICTAULIC.COM PL2013-FP
SECTIO
n 4
VIC
FLEX S
TAIn
LES
S S
TEEL SPR
Ink
LER FITTIn
GS
V36 Dry Sprinkler with Integral Style AB6 Assembly Order FormBi
llTo
:Sh
ip To:
Tag
Emai
lPh
one
No.
Fax
No.
Stat
e/Pr
ovin
ce
Com
pany
Nam
e
Qua
ntity
(as s
peci
�ed
belo
w):
If un
its o
f di�
eren
t siz
e, ty
pe o
r oth
er o
ptio
n ar
e re
quire
d, p
leas
e at
tach
add
ition
al fo
rm(s
) with
thei
r spe
ci�c
atio
n(s)
sepa
rate
ly.
Add
ress
Ord
er N
o.
Com
pany
Nam
e
Addr
ess
Stat
e
Zip
Code
/Pos
tal C
ode
Zip
Code
Dat
e
V36
Dry
Spr
inkl
er w
ith In
tegr
al S
tyle
AB
6 As
sem
bly
NO
TE: A
ll sy
stem
s are
PO
A. C
onta
ct C
usto
mer
Car
e fo
r pric
ing.
Sprin
kler
Fr
ame
Clas
sSp
rinkl
erTh
read
Sprin
kler
Fini
shDe
flect
or
Styl
e *
Sprin
kler
Resp
onse
Sprin
kler
K-Fa
ctor
Sprin
kler
Tem
pera
ture
Hose
Le
ngth
Brac
ket
Styl
eHo
seSt
yle
Escu
tche
on
Mat
eria
lTe
mp
of Fr
eeze
rin
Fahr
enhe
itNi
pple
❑ 2
- 1x
1 Br
anch
line
Nipp
le
❑ A
- VicF
lex❑
36 -
V36
Sprin
klers
❑ B
- ST
D PE
ND❑
C -
HOR
SIDEW
ALL
❑ 3
- 1"
NPT
❑ A
- 13
5°F/
57°C
❑ C
- 15
5°F/
68°C
❑ F
- 20
0°F/
93°C
❑ J
- 286
°F/1
41°C
❑ S
- St
anda
rd❑
Q -
Quick
❑ 4
- 5.6
❑ 5
- 8.0
❑ 0
- Co
ldRo
lled S
teel
❑ 1
- Br
ass
❑ 2
- Ch
rom
e❑
4 - W
hite
(RAL
9010
)
❑ A
B6 -
AB6
Escu
tche
onSt
yle
❑ 1
1 - Fl
ush
❑ 1
3 - Sl
eeve
an
d Skir
t
❑ 2
- 31
"❑
3 -
36"
❑ 4
- 48
"❑
5 -
60"
❑ 6
- 72
"
Free
zer W
all
Thick
ness
¼"
Pipe
Leng
th¼
"
❑ 0
30 -
3"❑
040
- 4"
❑ 0
50 -
5"❑
060
- 6"
❑ 0
70 -
7"❑
080
- 8"
❑ 0
90 -
9"❑
100
- 10
"❑
110
- 11
"❑
120
- 12
"
❑ 2
- AH
2 Ho
se❑
0
Pipe
Leng
thIn
ches
❑ 1
0❑
16
❑ 1
8❑
20
❑ 2
2❑
24
❑ 2
6❑
28
❑ 3
0
❑ A
-
≥ 20
°❑
B -
19
° to 0
°❑
C -
–1°
to –
20°
❑ D
- –
21° t
o –30
°❑
E -
–31
° to –
40°
A3
00
22
36AB
6
WWW.VICTAULIC.COM PL2013-FP56
VicFlex™ Sprinkler Fitting SystemsSE
CTI
On
4
VICFL
EX
STA
InLE
SS
STE
EL S
PR
Ink
LER
FIT
TIn
GS
VicFlex Pre-Assembled System Order FormBi
llTo
:Sh
ip To:
Tag
Emai
lPh
one
No.
Fax
No.
Stat
e/Pr
ovin
ce
Com
pany
Nam
e
Qua
ntity
(as s
peci
�ed
belo
w):
If un
its o
f di�
eren
t siz
e, ty
pe o
r oth
er o
ptio
n ar
e re
quire
d, p
leas
e at
tach
add
ition
al fo
rm(s
) with
thei
r spe
ci�c
atio
n(s)
sepa
rate
ly.
Addr
ess
Ord
er N
o.
Com
pany
Nam
e
Addr
ess
Stat
e
Zip
Code
/Pos
tal C
ode
Zip
Code
Dat
e
VicF
lex™
Ser
ies
AQB
Bra
ided
Sys
tem
s
VicF
lex S
erie
s AQ
U C
orru
gate
d Sy
stem
s
NO
TE: A
ll sy
stem
s are
PO
A. C
onta
ct C
usto
mer
Car
e fo
r pric
ing.
Impo
rtan
t: Fo
r con
ceal
ed sp
rinkl
er a
ssem
blie
s, de
cora
tive
cove
r pla
tes m
ust b
e or
dere
d se
pera
tely
. For
rece
ssed
sprin
kler
s, es
cutc
heon
s are
in
clud
ed in
the
abov
e pa
rt c
ode.
For
add
ition
al in
form
atio
n on
the
indi
vidu
al p
rodu
cts,
cons
ult t
heir
subm
ittal
pub
licat
ions
on
ww
w.v
itau
lic.c
omRe
ques
t a q
uote
on
the
Vict
aulic
web
site
at w
ww
.vic
taul
ic.c
om/s
elec
tion
tool
s
Spri
nkle
r Fr
ame
Clas
sSp
rink
ler
Thre
adSp
rink
ler
Fini
shD
e�ec
tor
Styl
e *
Spri
nkle
rRe
spon
seSp
rink
ler
K-Fa
ctor
Spri
nkle
rTe
mpe
ratu
reH
ose
Leng
thRe
duce
rH
ose
Styl
eRo
om
Size
Bran
ch L
ine
Nip
ple
Brac
ket
Spri
nkle
r Fr
ame
Clas
sSp
rink
ler
Thre
adSp
rink
ler
Fini
shD
e�ec
tor
Styl
e *
Spri
nkle
rRe
spon
seSp
rink
ler
K-Fa
ctor
Spri
nkle
rTe
mpe
ratu
reH
ose
Leng
thRe
duce
rH
ose
Styl
eRo
om
Size
Bran
ch L
ine
Nip
ple
Brac
ket
❑ A
- 24
” Sty
le A
B1❑
B -
48” S
tyle
AB1
❑ E
– In
stitu
tiona
l Bra
cket
–
Styl
e A
B3❑
K –
24"
ope
n-ga
te
1-Be
e2 –
Sty
le A
B7❑
L –
48"
ope
n-ga
te
1-Be
e2 –
Sty
le A
B7❑
P –
24"
ope
n ga
te b
rack
et,
hat f
urrin
g ch
anne
l –
Styl
e A
B9❑
Q –
48"
ope
n ga
te b
rack
et,
hat f
urrin
g ch
anne
l –
Styl
e A
B9
❑ A
- Vi
cFle
x❑
27
- V27
Sp
rinkl
ers
❑ 3
4 - V
34
Sprin
kler
s❑
38
- V38
Sp
rinkl
ers
❑ B
- ST
D P
END
❑ P
- ST
D C
NC
❑ G
- EC
LH P
END
❑ 1
– ½
” NPT
❑ 2
– ¾
” NPT
❑ C
- 15
5°F/
68°C
❑ F
- 20
0°F/
93°C
❑ S
- St
anda
rd❑
Q -
Qui
ck❑
4 -
5.6
❑ 5
- 8.
0❑
6 -
11.2
❑ 0
- N/A
❑ L
- La
rge
❑ S
- Sm
all
❑ 1
- Pl
ain
Bras
s❑
2 -
Chro
me
❑ 4
- W
hite
(R
AL
9010
)❑
B -
Nic
kel
Te�o
n w
ith
Stai
nles
s St
eel E
sc❑
C -
Nic
kel
Te�o
n w
ith
Whi
te
Stai
nles
s St
eel E
sc
❑ 1
- 5.
5”
Stra
ight
❑ 2
- 9”
St
raig
ht❑
3 -
13”
Stra
ight
❑ 4
- Sh
ort
90° E
lbow
❑ 5
- Lo
ng
90° E
lbow
❑ 2
- 31
”❑
3 -
36”
❑ 4
- 48
”❑
5 -
60”
❑ 6
- 72
”
❑ 1
- Br
aide
d 1”
(Ser
ies
AH
2)❑
2 -
Brai
ded
1”(S
erie
s A
H4)
❑ 2
- 1”
x 1
”
❑ K
– 2
4" o
pen-
gate
1-
Bee2
– S
tyle
AB7
❑ A
- Vi
cFle
x❑
27
- V27
Sp
rinkl
ers
❑ 3
4 - V
34
Sprin
kler
s❑
38
- V38
Sp
rinkl
ers
❑ B
- ST
D P
END
❑ P
- ST
D C
NC
❑ 1
– ½
” NPT
❑ 2
– ¾
” NPT
❑ C
- 15
5°F/
68°C
❑ F
- 20
0°F/
93°C
❑ S
- St
anda
rd❑
Q -
Qui
ck❑
4 -
5.6
❑ 5
- 8.
0❑
0- N
/A❑
L -
Larg
e❑
S -
Smal
l
❑ 1
- Pl
ain
Bras
s❑
2 -
Chro
me
❑ 4
- W
hite
(R
AL
9010
)❑
B -
Nic
kel
Te�o
n w
ith
Stai
nles
s St
eel E
sc❑
C -
Nic
kel
Te�o
n w
ith
Whi
te
Stai
nles
s St
eel E
sc
❑ 1
- 5.
5”
Stra
ight
❑ 2
- 31
”❑
4 -
48”
❑ 5
- 60
”❑
6 -
72”
❑ 4
- Co
rrug
ated
7⁄8”
(Ser
ies
AH
5)❑
2 -
1” x
1”
57
VicFlex™ Sprinkler Fitting Systems
WWW.VICTAULIC.COM PL2013-FP
SECTIO
n 4
VIC
FLEX S
TAIn
LES
S S
TEEL SPR
Ink
LER FITTIn
GS
Series AQI Flexible Sprinkler Fitting Assembly with Braided Hose and Institutional Bracket
Series AQI
FLEXIBLE SPRInkLER FITTInG ASSEMBLY WITH BRAIDED HOSE AnD InSTITUTIOnAL BRACkETRefer to publication 10.88
SERIES AQI SERIES AH4 HOSE WITH STYLE AB3 InSTITUTIOnAL BRACkET
Size Reducer Size Aprx. Wgt. Ea. Victaulic Box Price
Inches Inches Lbs. Part No. Quantity Each
31 x Z\x 5.5 2.4 A31HAQIB55 10 $77.50
9.0 2.9 A31HAQIB90 10 83.50
13.0 3.4 A31HAQIB13 10 90.50
48 x Z\x 5.5 2.9 A48HAQIB55 10 84.50
9.0 4.2 A48HAQIB90 10 91.00
13.0 4.7 A48HAQIB13 10 98.00
60 x Z\x 5.5 3.4 A60HAQIB55 10 93.00
9.0 3.9 A60HAQIB90 10 100.00
13.0 4.4 A60HAQIB13 10 107.00
72 x Z\x 5.5 3.8 A72HAQIB55 10 102.00
9.0 4.3 A72HAQIB90 10 108.50
13.0 4.8 A72HAQIB13 10 116.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Series AQC Flexible Sprinkler Fitting Assembly with Braided Hose for Clean Room ApplicationsSeries AQS Sub-Assemblies – Non-Hose Components
Series AQS
SUB-ASSEMBLIES – nOn-HOSE COMPOnEnTS
End Fittings and Parts Size Aprx. Wgt. Ea. Victaulic Box Price
Description Inches Lbs. Part No. Quantity Each
Reducing Nipple – 5Z\x”/140 mm LengthZ\x 0.7 A000AQFRNH 10 $15.00
C\v 0.7 A000AQFRNT 10 15.00
Reducing Nipple – 9” LengthZ\x 1.2 A090AQFRNH 10 21.50
C\v 1.2 A090AQFRNT 10 21.50
Reducing Nipple – 13” LengthZ\x 1.8 A130AQFRNH 10 28.50
C\v 1.8 A130AQFRNT 10 28.50
90 Reducing Elbow – 4”/101,6 mm LengthZ\x 0.9 A000AQFRE4 10 27.50
C\v 0.9 A000AQFRE6 10 27.50
90 Reducing Elbow – 6”/152,4 mm LengthZ\x 1.1 A000AQFRE5 10 27.50
C\v 1.1 A000AQFRE7 10 27.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
WWW.VICTAULIC.COM PL2013-FP58
VicFlex™ Sprinkler Fitting Systems SE
CTI
On
4
VICFL
EX
STA
InLE
SS
STE
EL S
PR
Ink
LER
FIT
TIn
GS
SECTION 5 – Vic-Press™ System, for Schedule 10S Stainless Steel Pipe
Vic-Press® System for Schedule 10S Stainless Steel Pipe
59WWW.VICTAULIC.COM PL2013-FP
Vic-Press System for Type 304 Schedule 10S Stainless Steel PipeThe Victaulic® Vic-Press® System for joining Schedule 10S Type 304 (L) stainless steel pipe provides a fast, easy, clean, and reliable means for joining Z\x – 2”/15 – 50 mm standard ASTM A312 Schedule 10S stainless steel pipe. Vic-Press Schedule 10S products are designed for pressure service up to 500 psi/3450 kPa or ANSI Class 150 (except steam, according to standard temperature/pressure charts) for water, oil, noncombustible gaseous and general chemical services and are dimensioned to ANSI/ASME B36.19M. Refer to seal selection data for the intended service.
The Vic-Press Schedule 10S System requires no flame or arc as with welding, and no cutting oil, chips or preparation time as with threading or flanging. Off-the-shelf stan-dard ASTM A312 Schedule 10S stainless steel pipe is cut to size, inserted into the coupling and the coupling or fitting is pressed onto the pipe in seconds.
The Vic-Press Schedule 10S System meets the hanging requirements of ASME B31.1, B31.3 and B31.9.
Vic-Press Schedule 10S Type 304 couplings and fittings are ANSI/NSF 61 Annex G Certified for cold (+86°F/+30°C) and hot (+180°F/+82°C) potable water service for Grade H and Grade E seal materials. FM Approved to 175 psi/1200 kPa service for above ground sprinkler systems.
Vic-Press™ 304Seal Selection
Seal Selection
(Unless specified otherwise, Grade “H” seals will be supplied)
GRADE TEMP. RANGE COMPOUNDCOLOR CODE * GENERAL SERVICE RECOMMENDATIONS
STANDARD SEAL
H –20°F to +210°F HNBRTwo
OrangeStripes
Recommended for hot petroleum/water mixtures, hydrocarbons, air with oil vapors, vegetable and mineral oils, engine oil, transmission oil. ANSI/NSF 61 Certified for potable water up to +180°F/+82°C.
OPTIONAL SEALS – Contact Victaulic for delivery time
E –30°F to +250°F EPDM GreenStripe
Recommended for hot water service, dilute acids, oil-free air, chemi-cal services. Not recommended for petroleum services. Not recom-mended for steam services. ANSI/NSF Certified for potable water up to +180°F/+82°C.
O +20°F to +300°F Fluoro-elastomer
BlueStripe
Recommended for oxidizing acids. petroleum oils, halogenated hydrocarbons, lubricants, hydraulic fluids, organic liquids and air with hydrocarbons. Not recommended for steam services.
* Vic-Press Schedule 10S stainless steel products must only be used on services compatible with seal and fitting materials. Incompatible services may result in leakage. For services not listed or special services, contact Victaulic for recommendations. Refer to the Victaulic Gasket Selection Guide (05.01) for specific recommendations.
WARnInG• Before attempting to install any Vic-Press Schedule 10S System products,
carefully read and fully understand the “Vic-Press Schedule 10S Products Installation Instructions” (I-P500) and the operating and maintenance manual supplied with the tool.
Failure to follow these instructions could result in serious personal injury, property damage, product damage, joint leakage, and/or joint failure.
WWW.VICTAULIC.COM PL2013-FP60
Vic-Press System For Type 304 Schedule 10S Stainless Steel Pipe SE
CTI
On
5
VIC
-PR
ES
S F
OR
SCH
EDU
LE 1
0S
Style P500 Loose Seals
Style P500
LOOSE SEALSRefer to publication 18.12
STYLE P500 – SPARE PARTS – LOOSE SEALS
Nominal Size Price Each †
Inches Standard Grade “H” HNBR or Grade “E” EPDM Seal
Z\x $6.00
C\v 6.50
1 8.00
1Z\x 11.00
2 15.00
† Specify choice clearly on order.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Style P597 Standard Coupling
Style P597
STAnDARD COUPLInG
(P X P)Refer to publication 18.12
STYLE P597 – WITH STAnDARD GRADE “H” HnBR SEAL OR OPTIOnAL GRADE “E” SEAL
Nominal Size
Aprx. Weight
Each Price Each †
Inches LbsStandard Grade “H” HNBR or Grade “E”
EPDM Seal
Z\x 0.2 $43.50
C\v 0.3 47.50
1 0.5 54.00
1Z\x 0.7 73.00
2 1.0 96.00
† Specify choice clearly on order.
Style P596 Male Adapter – Threaded
Style P596
MALE ADAPTER – THREADED
(P X M)Refer to publication 18.12
STYLE P596 – WITH STAnDARD GRADE “H” HnBR SEAL OR OPTIOnAL GRADE “E” SEAL
Nominal Size
Aprx. Weight
Each Price Each †
Inches Lbs Standard Grade “H” HNBR or Grade “E” EPDM Seal
Z\x x Z\x 0.3 $79.50
C\v x Z\x 0.4 82.50
C\v 0.4 82.50
1 0.5 95.50
1 x C\v 0.5 98.00
1 0.6 98.00
1Z\x x C\v 0.8 183.00
1Z\x 1.0 164.00
2 x 2 1.4 202.00
† Specify choice clearly on order.
61
Vic-Press System For Type 304 Schedule 10S Stainless Steel Pipe
WWW.VICTAULIC.COM PL2013-FP
SECTIO
n 5
VIC
-PR
ES
S FO
R S
CH
EDU
LE 10
S
Series P569 Type 316 Stainless Steel Ball Valve
Series P569
TYPE 316 STAInLESS STEEL BALL VALVE WITH LOCkInG HAnDLERefer to publication 18.12
P X P
P X G
G X G
For Series P569 pricing, please refer to Series P569 in the Type 316 section.
Series P589 Brass Body Ball Valve
Series P589
VIC-PRESS SCHEDULE 10S SYSTEM BRASS BODY BALL VALVE
Stainless Steel Vic-Press Type 304 Schedule 10S EndsRefer to publication 18.12
SERIES P589 – VIC-PRESS SCHEDULE 10S EnDS WITH STAnDARD GRADE “H” HnBR SEAL OR OPTIOnAL GRADE “E” SEAL
Nominal Size
Aprx. Weight Each End to End Price Each †
Inches Lbs InchesStandard Grade “H” HNBR or
Grade “E” EPDM Seal
Z\x 1.0 9.03 $259.50
C\v 1.6 9.12 285.50
1 2.8 10.11 342.00
1Z\x 4.7 11.18 479.50
2 6.9 12.69 587.00
† Specify choice clearly on order.
Style P586 90° Elbow – Short Tangent
Style P586
90° ELBOW – SHORT TAnGEnT
(P X P)Refer to publication 18.12
STYLE P586 – WITH STAnDARD GRADE “H” HnBR SEAL OR OPTIOnAL GRADE “E” SEAL
Nominal Size
Aprx. Weight
Each Price Each †
Inches LbsStandard Grade “H” HNBR or Grade “E”
EPDM Seal
Z\x 0.3 $81.50
C\v 0.4 92.00
1 0.8 109.00
1Z\x 1.4 216.00
2 2.0 276.50
† Specify choice clearly on order.
WWW.VICTAULIC.COM PL2013-FP62
Vic-Press System For Type 304 Schedule 10S Stainless Steel Pipe SE
CTI
On
5
VIC
-PR
ES
S F
OR
SCH
EDU
LE 1
0S
Style P542 90° Street Elbow
Style P542
90° STREET ELBOW
(P X T)Refer to publication 18.12
STYLE P542 – WITH STAnDARD GRADE “H” HnBR SEAL OR OPTIOnAL GRADE “E” SEAL
Nominal Size
Aprx. Weight
Each Price Each †
Inches LbsStandard Grade “H” HNBR or Grade “E”
EPDM Seal
Z\x 0.3 $81.50
C\v 0.4 92.00
1 0.7 109.00
1Z\x 1.4 216.00
2 2.0 276.50
† Specify choice clearly on order.
Style P591 45° Elbow
Style P591
45° ELBOW
(P X P)Refer to publication 18.12
STYLE P591 – WITH STAnDARD GRADE “H” HnBR SEAL OR OPTIOnAL GRADE “E” SEAL
Nominal Size
Aprx. Weight Each Price Each †
Inches LbsStandard Grade “H” HNBR or Grade “E”
EPDM Seal
Z\x 0.2 $72.50
C\v 0.4 80.00
1 0.8 95.50
1Z\x 1.7 188.00
2 2.5 241.00
† Specify choice clearly on order.
Style P543 45° Street Elbow
Style P543
45° STREET ELBOW
(P X T)Refer to publication 18.12
STYLE P543 – WITH STAnDARD GRADE “H” HnBR SEAL OR OPTIOnAL GRADE “E” SEAL
Nominal Size
Aprx. Weight Each Price Each †
Inches LbsStandard Grade “H” HNBR or Grade “E”
EPDM Seal
Z\x 0.2 $72.50
C\v 0.4 80.00
1 0.8 95.50
1Z\x 1.7 188.00
2 2.5 241.00
† Specify choice clearly on order.
63
Vic-Press System For Type 304 Schedule 10S Stainless Steel Pipe
WWW.VICTAULIC.COM PL2013-FP
SECTIO
n 5
VIC
-PR
ES
S FO
R S
CH
EDU
LE 10
S
Style P592 Tee
Style P592
TEE
(P X P X P)Refer to publication 18.12
STYLE P592 – WITH STAnDARD GRADE “H” HnBR SEAL OR OPTIOnAL GRADE “E” SEAL
Nominal Size
Aprx. Weight
Each Price Each †
Inches LbsStandard Grade “H” HNBR or Grade “E”
EPDM Seal
Z\x 0.4 $148.50
C\v 0.5 164.00
1 0.9 175.50
1Z\x 1.5 224.50
2 2.1 280.00
† Specify choice clearly on order.
Style P593 Tee – Reducing Branch
Style P593
TEE – REDUCInG BRAnCH
(P X P X P)Refer to publication 18.12
STYLE P593 – WITH STAnDARD GRADE “H” HnBR SEAL OR OPTIOnAL GRADE “E” SEAL
Nominal Size
Aprx. Weight
Each Price Each †
Inches LbsStandard Grade “H” HNBR or Grade “E”
EPDM Seal
C\v x C\v x Z\x 0.5 $165.50
1 x 1 x Z\x 0.8 171.00
C\v 0.8 174.50
1Z\x x 1Z\x x Z\x 1.2 206.00
C\v 1.3 208.00
1 1.4 209.00
2 x 2 x Z\x 1.7 268.50
C\v 1.7 272.50
1 1.8 280.50
1Z\x 2.0 309.00
† Specify choice clearly on order.
Style P588 Tee – Reducing Branch – Threaded
Style P588
TEE – REDUCInG BRAnCH – THREADED
(P X P X F)Refer to publication 18.12
STYLE P588 – WITH STAnDARD GRADE “H” HnBR SEAL OR OPTIOnAL GRADE “E” SEAL
Nominal Size
Aprx. Weight
Each Price Each †
Inches LbsStandard Grade “H” HNBR or Grade “E”
EPDM Seal
Z\x x Z\x x Z\x 0.4 $224.50
C\v x C\v x Z\x 0.5 243.00
C\v 0.6 246.00
1 x 1 x Z\x 0.9 247.50
C\v 0.9 248.50
1 1.1 269.50
1Z\x x 1Z\x x Z\x 1.4 280.50
C\v 1.5 283.50
1 1.5 309.50
2 x 2 x Z\x 1.7 319.50
C\v 1.7 323.00
1 2.0 346.00
† Specify choice clearly on order.
WWW.VICTAULIC.COM PL2013-FP64
Vic-Press System For Type 304 Schedule 10S Stainless Steel Pipe SE
CTI
On
5
VIC
-PR
ES
S F
OR
SCH
EDU
LE 1
0S
Style P594 Concentric Reducer
Style P594
COnCEnTRIC REDUCER
(P X P)Refer to publication 18.12
STYLE P594 – WITH STAnDARD GRADE “H” HnBR SEAL OR OPTIOnAL GRADE “E” SEAL
Nominal Size
Aprx. Weight
Each Price Each †
Inches Lbs Standard Grade “H” HNBR or Grade “E” EPDM Seal
C\v x Z\x 0.5 $134.50
1 x Z\x 0.6 181.00
C\v 0.7 143.50
1Z\x x Z\x 0.9 254.00
C\v 1.0 238.50
1 1.1 132.50
2 x Z\x 1.2 472.00
C\v 1.3 212.50
1 1.4 164.00
1Z\x 1.6 164.00
† Specify choice clearly on order.
Style P595 Flange Adapter
Style P595
FLAnGE ADAPTER
(P X L)Refer to publication 18.12
STYLE P595 – WITH STAnDARD GRADE “H” HnBR SEAL OR OPTIOnAL GRADE “E” SEAL
Nominal Size
Aprx. Weight Each Price Each †
Inches LbsStandard Grade “H” HNBR or Grade “E”
EPDM Seal
Z\x 2.2 $607.50
C\v 2.3 625.00
1 2.8 634.50
1Z\x 3.6 773.50
2 5.8 861.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
† Specify choice clearly on order.
Style P565 Flange Adapter
Style P565
FLAnGE ADAPTER (VAn STOnE TYPE)
(P X L)Refer to publication 18.12
STYLE P565 – WITH STAnDARD GRADE “H” HnBR SEAL OR OPTIOnAL GRADE “E” SEAL
Nominal Size
Aprx. Weight
Each Price Each †
Inches LbsStandard Grade “H” HNBR or Grade “E”
EPDM Seal
Z\x 2.4 $212.00
C\v 2.5 212.00
1 3.0 285.50
1Z\x 4.1 314.50
2 6.8 337.50
† Specify choice clearly on order.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Style P587 Transition Nipple
Style P587
TRAnSITIOn nIPPLE
(T X G)Refer to publication 18.12
STYLE P587
Nominal Size
Aprx. Weight
Each Unit End to End Price
Inches Lbs Inches Each
C\v 0.3 4 $111.50
1 0.5 4 115.00
1Z\x 0.7 4 144.00
2 0.9 4 151.50
† Specify choice clearly on order.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
65
Vic-Press System For Type 304 Schedule 10S Stainless Steel Pipe
WWW.VICTAULIC.COM PL2013-FP
SECTIO
n 5
VIC
-PR
ES
S FO
R S
CH
EDU
LE 10
S
Style P584 Threaded Union
Style P584
THREADED UnIOn **
(P X P)Refer to publication 18.12
STYLE P584 – WITH STAnDARD GRADE “H” HnBR SEAL OR OPTIOnAL GRADE “E” SEAL
Nominal Size
Aprx. Weight Each Price Each †
Inches LbsStandard Grade “H” HNBR or Grade “E”
EPDM Seal
Z\x 3.0 $499.00
C\v 3.7 566.00
1 4.3 689.00
1Z\x 6.0 1178.00
2 6.8 1453.00
† Specify choice clearly on order.
** Grooved End Union - A grooved end union can be formed with two Style P587 (Type 304 stainless) transition nipples (see above) and a variety of grooved end couplings equipped with varied gasket materials to meet service requirements. For stan-dard ductile iron couplings, stainless steel couplings and gaskets refer to Main Price List.
Style P599 Female Adapter – Threaded
Style P599
FEMALE ADAPTER – THREADED
(P X F)Refer to publication 18.12
STYLE P599 – WITH STAnDARD GRADE “H” HnBR SEAL OR OPTIOnAL GRADE “E” SEAL
Nominal Size
Aprx. Weight
Each Price Each †
Inches Lbs Standard Grade “H” HNBR or Grade “E” EPDM Seal
Z\x x Z\x 0.3 $96.50
C\v x Z\x 0.3 97.00
C\v 0.4 99.50
1 x Z\x 0.7 105.00
C\v 0.6 111.50
1 0.6 119.00
1Z\x x 1 1.0 188.00
1Z\x 1.0 236.00
2 x 1Z\x 1.3 233.00
2 1.2 256.50
† Specify choice clearly on order.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Style P561 Adapter
Style P561
WELD ADAPTER
(P X T)Refer to publication 18.12
STYLE P561 – WITH STAnDARD GRADE “H” HnBR SEAL OR OPTIOnAL GRADE “E” SEAL
Nominal Size
Aprx. Weight Each Price Each †
Inches LbsStandard Grade “H” HNBR or Grade “E”
EPDM Seal
Z\x 0.3 $79.50
C\v 0.4 60.00
1 0.6 98.00
1Z\x 0.9 171.00
2 1.4 202.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
† Specify choice clearly on order.
Style P540 End Cap
Style P540
EnD CAPRefer to publication 18.12
STYLE P540
Nominal Size
Aprx. Weight Each Price
Inches Lbs Each
Z\x 0.1 $102.00
C\v 0.1 113.50
1 0.3 121.00
1Z\x 0.4 154.50
2 0.5 192.50
WWW.VICTAULIC.COM PL2013-FP66
Vic-Press System For Type 304 Schedule 10S Stainless Steel Pipe SE
CTI
On
5
VIC
-PR
ES
S F
OR
SCH
EDU
LE 1
0S
PFT510 Vic-Press Tool
PFT510 Vic-Press 10S Tool
The Vic-Press Schedule 10S System requires a tool specifically designed for products on off-the-shelf standard ASTM A312 Schedule 10S stainless steel pipe. Refer to Section 7 – Pipe Preparation Tools for prices and where to call for purchase informaiton.
NOTE: Victaulic Tool Discount will apply.
PFT510 TOOL
67
Vic-Press System For Type 304 Schedule 10S Stainless Steel Pipe
WWW.VICTAULIC.COM PL2013-FP
SECTIO
n 5
VIC
-PR
ES
S FO
R S
CH
EDU
LE 10
S
Vic-Press System for Type 316 Schedule 10S Stainless Steel PipeThe Victaulic® Vic-Press® System for joining Schedule 10S Type 316 (L) stainless steel pipe provides a fast, easy, clean, and reliable means for joining Z\x – 2”/15 – 50 mm standard ASTM A312 Schedule 10S stainless steel pipe. Vic-Press Schedule 10S products are designed for pressure service up to 500 psi/3450 kPa or ANSI Class 150 (except steam, according to standard temperature/pressure charts) for water, oil, noncombustible gaseous and general chemical services and are dimensioned to ANSI/ASME B36.19M. Refer to seal selection data for the intended service.
The Vic-Press Schedule 10S System eliminates the need for flame as in welding, no cutting oil, chips or preparation time as with threading or flanging. Off-the-shelf stan-dard ASTM A312 Schedule 10S stainless steel pipe is cut to size, inserted into the coupling and the coupling is pressed onto the pipe and fitting in seconds.
The Vic-Press Schedule 10S System meets the hanging requirements of ASME B31.1, B31.3 and B31.9.
Vic-Press Type 316 couplings and fittings are recommended for varying concentra-tions of hot petroleum/water mixtures, hydrocarbons, air with oil vapors, vegetable and mineral oils, as well as automotive fluids such as engine oil and transmis-sion fluid within the temperature range of –20°F to +210°F/–29°C to +98°C. UL Classified in accordance with ANSI/NSF 61 Annex G for cold (+86°F/+30°C) and hot (+180°F/+82°C) potable water service for Grade H and Grade E seal materials. FM Approved to 175 psi/1200 kPa service for above ground sprinkler systems.
Vic-Press 316Seal Selection
Seal Selection
(Unless specified otherwise Grade “H” seals will be supplied)
GRADE TEMP. RANGE COMPOUNDCOLOR CODE * GENERAL SERVICE RECOMMENDATIONS
STANDARD SEAL
H –20°F to +210°F HNBRTwo
OrangeStripes
Recommended for hot petroleum/water mixtures, hydrocarbons, air with oil vapors, vegetable and mineral oils, engine oil, transmission oil. ANSI/NSF 61 Certified for potable water up to +180°F/+82°C.
OPTIONAL SEALS – Contact Victaulic for delivery time
E –30°F to +250°F EPDM GreenStripe
Recommended for hot water service, dilute acids, oil-free air, chemi-cal services. Not recommended for petroleum services. Not recom-mended for steam services. ANSI/NSF Certified for potable water up to +180°F/+82°C.
O +20°F to +300°F Fluoro-elastomer
BlueStripe
Recommended for oxidizing acids. petroleum oils, halogenated hydrocarbons, lubricants, hydraulic fluids, organic liquids and air with hydrocarbons. Not recommended for steam services.
* Vic-Press Schedule 10S stainless steel products must only be used on services compatible with seal and fitting materials. Incompatible services may result in leakage. For services not listed or special services, contact Victaulic for recommendations. Refer to the Victaulic Gasket Selection Guide (05.01) for specific recommendations.
WARnInG• Before attempting to install any Vic-Press Schedule 10S System products,
carefully read and fully understand the “Vic-Press Schedule 10S Products Installation Instructions” (I-P500) and the operating and maintenance manual supplied with the tool.
Failure to follow these instructions could result in serious personal injury, property damage, product damage, joint leakage, and/or joint failure.
WWW.VICTAULIC.COM PL2013-FP68
Vic-Press System For Type 316 Schedule 10S Stainless Steel Pipe SE
CTI
On
5
VIC
-PR
ES
S F
OR
SCH
EDU
LE 1
0S
Style P500 Loose Seals
Style P500
LOOSE SEALSRefer to publication 18.11
STYLE P500 – SPARE PARTS – LOOSE SEALS
Nominal Size Price Each †
Inches Standard Grade “H” HNBR or Grade “E” EPDM Seal
Z\x $6.00
C\v 6.50
1 8.00
1Z\x 11.00
2 15.00
† Specify choice clearly on order.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Style P507 Standard Coupling
Style P507
STAnDARD COUPLInG
(P X P)Refer to publication 18.11
STYLE P507 – WITH STAnDARD GRADE “H” HnBR SEAL OR OPTIOnAL GRADE “E” SEAL
Nominal Size
Aprx. Weight Each Price Each †
Inches LbsStandard Grade “H” HNBR or Grade “E”
EPDM Seal
Z\x 0.2 $48.50
C\v 0.3 55.00
1 0.5 62.00
1Z\x 0.7 85.50
2 1.0 125.00
† Specify choice clearly on order.
Style P576 Male Adapter – Threaded
Style P576
MALE ADAPTER – THREADED
(P X M)Refer to publication 18.11
STYLE P576 – WITH STAnDARD GRADE “H” HnBR SEAL OR OPTIOnAL GRADE “E” SEAL
Nominal Size
Aprx. Weight Each Price Each †
Inches Lbs Standard Grade “H” HNBR or Grade “E” EPDM Seal
Z\x x Z\x 0.3 $82.00
C\v x Z\x 0.4 85.50
C\v 0.4 85.50
1 0.5 98.50
1 x C\v 0.5 101.00
1 0.6 101.00
1Z\x x C\v 0.8 185.00
1Z\x 1.0 210.00
2 x 2 1.4 272.50
† Specify choice clearly on order.
Style P508 Slip Coupling
Style P508
SLIP COUPLInG
(P X P)Refer to publication 18.11
STYLE P508 – WITH STAnDARD GRADE “H” HnBR SEAL OR OPTIOnAL GRADE “E” SEAL
Nominal Size
Aprx. Weight
Each Price Each †
Inches LbsStandard Grade “H” HNBR or Grade “E”
EPDM Seal
Z\x 0.3 $57.00
C\v 0.4 62.00
1 0.7 71.00
1Z\x 1.1 92.00
2 1.6 117.50
† Specify choice clearly on order.
69
Vic-Press System For Type 316 Schedule 10S Stainless Steel Pipe
WWW.VICTAULIC.COM PL2013-FP
SECTIO
n 5
VIC
-PR
ES
S FO
R S
CH
EDU
LE 10
S
Series P569 Stainless Steel Ball Valve
Series P569
TYPE 316 STAInLESS STEEL BALL VALVE WITH LOCkInG HAnDLERefer to publication 18.11
P X P
P X G
G X G
SERIES P569 – VIC-PRESS SCHEDULE 10S X VIC-PRESS SCHEDULE 10S (P X P)
Nominal SizeAprx.
Weight Each End to End
Price Each Vic-Press x Vic-Press
(P X P) †
Inches Lbs InchesStandard Grade “H” HNBR or
Grade “E” EPDM Seal
Z\x 1.5 8.26 $358.00
C\v 2.4 8.36 416.00
1 3.6 8.77 500.50
1Z\x 6.9 9.76 777.00
2 9.5 9.83 1042.00
SERIES P569 VIC-PRESS SCHEDULE 10S X GROOVED (P X G)
Nominal SizeAprx.
Weight Each End to End
Price Each Vic-Press x Grooved
(P X G) †
Inches Lbs InchesStandard Grade “H” HNBR or
Grade “E” EPDM Seal
C\v 2.4 8.54 $416.00
1 3.6 8.75 500.50
1Z\x 6.9 10.9 777.00
2 9.5 12.11 1042.00
SERIES P569 GROOVED X GROOVED (G X G)
Nominal SizeAprx.
Weight Each End to End Price Each
Inches Lbs InchesGrooved x Grooved
(G X G)
C\v 2.4 8.44 $361.50
1 3.6 8.76 438.50
1Z\x 6.9 10.32 692.00
2 9.5 10.92 917.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Series P569 Repair Kits
Series P569
REPAIR kITSRefer to publication 18.11
SERIES P569 REPAIR kITS
Nominal Size Price Each
Inches Repair Kit Type 316 Stainless Steel Ball Stem
Z\x $42.00 $62.50 +
C\v 43.00 60.00 +
1 54.50 75.00 +
1Z\x 114.00 162.50 +
2 170.50 277.00 +
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
+ Quoted on application. Contact Victaulic for pricing and availability.
Series P589 Brass Body Ball Valve
Series P589
VIC-PRESS SCHEDULE 10S SYSTEM BRASS BODY BALL VALVE
Stainless Steel Vic-Press Type 316 Schedule 10S EndsRefer to publication 18.11
SERIES P589 – VIC-PRESS SCHEDULE 10S EnDS WITH STAnDARD GRADE “H” HnBR SEAL OR OPTIOnAL GRADE “E” SEAL
Nominal Size
Aprx. Weight Each End to End Price Each †
Inches Lbs InchesStandard Grade “H” HNBR or
Grade “E” EPDM Seal
Z\x 1.0 9.03 $265.00
C\v 1.6 9.12 290.50
1 2.8 10.11 348.50
1Z\x 4.7 11.18 572.00
2 6.9 12.69 729.00
† Specify choice clearly on order.
WWW.VICTAULIC.COM PL2013-FP70
Vic-Press System For Type 316 Schedule 10S Stainless Steel Pipe SE
CTI
On
5
VIC
-PR
ES
S F
OR
SCH
EDU
LE 1
0S
Style P568 90° Elbow – Short Tangent
Style P568
90° ELBOW – SHORT TAnGEnT
(P X P)Refer to publication 18.11
STYLE P568 – WITH STAnDARD GRADE “H” HnBR SEAL OR OPTIOnAL GRADE “E” SEAL
Nominal Size
Aprx. Weight Each Price Each †
Inches lbsStandard Grade “H” HNBR or Grade “E”
EPDM Seal
Z\x 0.3 $156.50
C\v 0.4 176.50
1 0.8 198.00
1Z\x 1.4 267.50
2 2.0 367.50
† Specify choice clearly on order.
Style P562 90° Street Elbow
Style P562
90° STREET ELBOW
(P X T)Refer to publication 18.11
STYLE P562 – WITH STAnDARD GRADE “H” HnBR SEAL OR OPTIOnAL GRADE “E” SEAL
Nominal Size
Aprx. Weight Each Price Each †
Inches lbsStandard Grade “H” HNBR or Grade “E”
EPDM Seal
Z\x 0.3 $156.50
C\v 0.4 176.50
1 0.7 198.00
1Z\x 1.4 267.50
2 2.0 367.50
† Specify choice clearly on order.
Style P571 45° Elbow
Style P571
45° ELBOW
(P X P)Refer to publication 18.11
STYLE P571 – WITH STAnDARD GRADE “H” HnBR SEAL OR OPTIOnAL GRADE “E” SEAL
Nominal Size
Aprx. Weight Each Price Each †
Inches lbsStandard Grade “H” HNBR or Grade “E”
EPDM Seal
Z\x 0.2 $143.50
C\v 0.4 154.50
1 0.8 173.00
1Z\x 1.7 232.50
2 2.5 319.00
† Specify choice clearly on order.
71
Vic-Press System For Type 316 Schedule 10S Stainless Steel Pipe
WWW.VICTAULIC.COM PL2013-FP
SECTIO
n 5
VIC
-PR
ES
S FO
R S
CH
EDU
LE 10
S
Style P563 45° Street Elbow
Style P563
45° STREET ELBOW
(P X T)Refer to publication 18.11
STYLE P563 – WITH STAnDARD GRADE “H” HnBR SEAL OR OPTIOnAL GRADE “E” SEAL
Nominal Size
Aprx. Weight Each Price Each †
Inches lbsStandard Grade “H” HNBR or Grade “E”
EPDM Seal
Z\x 0.2 $143.50
C\v 0.4 154.50
1 0.8 173.00
1Z\x 1.7 232.50
2 2.5 319.00
† Specify choice clearly on order.
Style P572 Tee
Style P572
TEE
(P X P X P)Refer to publication 18.11
STYLE P572 – WITH STAnDARD GRADE “H” HnBR SEAL OR OPTIOnAL GRADE “E” SEAL
Nominal Size
Aprx. Weight Each Price Each †
Inches LbsStandard Grade “H” HNBR or Grade “E”
EPDM Seal
Z\x 0.4 $338.50
C\v 0.5 366.00
1 0.9 384.00
1Z\x 1.5 452.50
2 2.1 558.00
† Specify choice clearly on order.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Style P573 Tee – Reducing Branch
Style P573
TEE – REDUCInG BRAnCH
(P X P X P)Refer to publication 18.11
STYLE P573 – WITH STAnDARD GRADE “H” HnBR SEAL OR OPTIOnAL GRADE “E” SEAL
Nominal Size
Aprx. Weight Each Price Each †
Inches LbsStandard Grade “H” HNBR or Grade “E”
EPDM Seal
C\v x C\v x Z\x 0.5 $386.50
1 x 1 x Z\x 0.8 420.00
C\v 0.8 437.00
1Z\x x 1Z\x x Z\x 1.2 617.00
C\v 1.3 622.50
1 1.4 637.50
2 x 2 x Z\x 1.7 721.50
C\v 1.7 743.50
1 1.8 828.00
1Z\x 2.0 850.00
† Specify choice clearly on order.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
WWW.VICTAULIC.COM PL2013-FP72
Vic-Press System For Type 316 Schedule 10S Stainless Steel Pipe SE
CTI
On
5
VIC
-PR
ES
S F
OR
SCH
EDU
LE 1
0S
Style P578 Tee – Reducing Branch Threaded
Style P578
TEE – REDUCInG BRAnCH THREADED
(P X P X F)Refer to publication 18.11
STYLE P578 – WITH STAnDARD GRADE “H” HnBR SEAL OR OPTIOnAL GRADE “E” SEAL
Nominal Size
Aprx. Weight Each Price Each †
Inches LbsStandard Grade “H” HNBR or Grade “E”
EPDM Seal
Z\x x Z\x x Z\x 0.4 $471.50
C\v x C\v x Z\x 0.5 523.00
C\v 0.6 536.50
1 x 1 x Z\x 0.9 573.00
C\v 0.9 583.50
1 1.1 627.50
1Z\x x 1Z\x x Z\x 1.4 685.50
C\v 1.5 710.00
1 1.5 738.50
2 x 2 x Z\x 1.7 756.00
C\v 1.7 783.50
1 2.0 830.50
† Specify choice clearly on order.
Style P574 Concentric Reducer
Style P574
COnCEnTRIC REDUCER
(P X P)Refer to publication 18.11
STYLE P574 – WITH STAnDARD GRADE “H” HnBR SEAL OR OPTIOnAL GRADE “E” SEAL
Nominal Size
Aprx. Weight Each Price Each †
Inches Lbs Standard Grade “H” HNBR or Grade “E” EPDM Seal
C\v x Z\x 0.5 $157.50
1 x Z\x 0.6 201.00
C\v 0.7 148.50
1Z\x x Z\x 0.9 298.00
C\v 1.0 195.50
1 1.1 137.50
2 x Z\x 1.2 516.00
C\v 1.3 225.00
1 1.4 169.00
1Z\x 1.6 169.00
† Specify choice clearly on order.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Style P575 Flange Adapter
Style P575
FLAnGE ADAPTER
(P X L)Refer to publication 18.11
STYLE P575 – WITH STAnDARD GRADE “H” HnBR SEAL OR OPTIOnAL GRADE “E” SEAL
Nominal Size
Aprx. Weight Each Price Each †
Inches LbsStandard Grade “H” HNBR or Grade “E”
EPDM Seal
Z\x 2.2 $616.00
C\v 2.3 627.50
1 2.8 642.50
1Z\x 3.6 779.00
2 5.8 865.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
† Specify choice clearly on order.
73
Vic-Press System For Type 316 Schedule 10S Stainless Steel Pipe
WWW.VICTAULIC.COM PL2013-FP
SECTIO
n 5
VIC
-PR
ES
S FO
R S
CH
EDU
LE 10
S
Style P566 Flange Adapter
Style P566
FLAnGE ADAPTER (VAn STOnE TYPE)
(P X L)Refer to publication 18.11
STYLE P566 – WITH STAnDARD GRADE “H” HnBR SEAL OR OPTIOnAL GRADE “E” SEAL
Nominal Size
Aprx. Weight Each Price Each †
Inches LbsStandard Grade “H” HNBR or Grade “E”
EPDM Seal
Z\x 2.4 $212.00
C\v 2.5 212.00
1 3.0 285.50
1Z\x 4.1 314.50
2 6.8 337.50
† Specify choice clearly on order.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Style P577 Adapter Nipple
Style P577
ADAPTER nIPPLE
(T X G)Refer to publication 18.11
STYLE P577
Nominal Size
Aprx. Weight Each Price
Inches Lbs Each
C\v 0.3 $114.50
1 0.5 119.00
1Z\x 0.7 149.00
2 0.9 155.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Style P585 Threaded Union
Style P585
THREADED UnIOn **
(P X P)Refer to publication 18.11
STYLE P585 – WITH STAnDARD GRADE “H” HnBR SEAL OR OPTIOnAL GRADE “E” SEAL
Nominal Size
Aprx. Weight Each Price Each †
Inches LbsStandard Grade “H” HNBR or Grade “E”
EPDM Seal
Z\x 3.0 $510.00
C\v 3.7 588.00
1 4.3 718.50
1Z\x 6.0 1189.00
2 6.8 1570.50
† Specify choice clearly on order.
** Grooved End Union - A grooved end union can be formed with two Style P587 (Type 304 stainless) transition nipples (see above) and a variety of grooved end couplings equipped with varied gasket materials to meet service requirements. For stan-dard ductile iron couplings, stainless steel couplings and gaskets refer to Main Price List.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
WWW.VICTAULIC.COM PL2013-FP74
Vic-Press System For Type 316 Schedule 10S Stainless Steel Pipe SE
CTI
On
5
VIC
-PR
ES
S F
OR
SCH
EDU
LE 1
0S
Style P579 Female Adapter – Threaded
Style P579
FEMALE ADAPTER – THREADED
(P X F)Refer to publication 18.11
STYLE P579 – WITH STAnDARD GRADE “H” HnBR SEAL OR OPTIOnAL GRADE “E” SEAL
Nominal Size
Aprx. Weight Each Price Each †
Inches Lbs Standard Grade “H” HNBR or Grade “E” EPDM Seal
Z\x x Z\x 0.3 $108.50
C\v x Z\x 0.3 113.00
C\v 0.4 115.00
1 x Z\x 0.7 120.50
C\v 0.6 127.50
1 0.6 134.50
1Z\x x 1 1.0 225.00
1Z\v 0.8 225.00
1Z\x 1.0 282.00
2 x 1Z\v 1.1 279.50
1Z\x 1.3 279.50
2 1.2 306.50
† Specify choice clearly on order.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Style P560 End Cap
P560
EnD CAPRefer to publication 18.11
STYLE P560 EnD CAP
Nominal Size
Aprx. Weight Each Price
Inches Lbs Each
Z\x 0.1 $233.50
C\v 0.1 252.00
1 0.3 265.00
1Z\x 0.4 312.00
2 0.5 384.50
PFT510 Vic-Press Tool
PFT510 Vic-Press 10S Tool
The Vic-Press Schedule 10S System requires a tool specifically designed for products on off-the-shelf stan-dard ASTM A312 Schedule 10S stainless steel pipe. Refer to Section 7 – Pipe Preparation Tools for prices and where to call for purchase informaiton.
NOTE: Victaulic Tool Discount will apply.
PFT510 TOOL
75
Vic-Press System For Type 316 Schedule 10S Stainless Steel Pipe
WWW.VICTAULIC.COM PL2013-FP
SECTIO
n 5
VIC
-PR
ES
S FO
R S
CH
EDU
LE 10
S
WWW.VICTAULIC.COM PL2013-FP76
SECTION 6 – Victaulic Carbon Steel Press System
Victaulic Carbon Steel Press System
77WWW.VICTAULIC.COM PL2013-FP
Victaulic Carbon Steel Press SystemThe Victaulic® Carbon Steel Press System offers economy, speed and reliabilty for joining small diameter pipe for fire protection, heating/air conditioning and many other services. Victaulic Carbon Steel Press System products for carbon steel pipe are externally zinc electroplated. Victaulic Carbon Steel Press System is not intended for use in open loop water systems. Request 12.02.
The system incorporates Schedule 5 steel pipe from C\v – 2”/20 mm – 50 mm with a system of Victaulic Carbon Steel Press System couplings, elbows, tees, reducers and adapters. The Victaulic Carbon Steel Press System is BOCA approved, Listed by SBCCI PST and ESI and is UL/ULC Listed and FM Approved for 175 psi/1200 kPa fire protection service. Products are rated to 300 psi/2065 kPa for heating water and other general services.
Pressfit for Carbon Steel PipeGasket Selection
Gasket Selection O-RInG SELECTIOn MUST ALWAYS BE SPECIFIED On YOUR ORDER
GRADE TEMP. RANGE COMPOUNDCOLOR CODE * GENERAL SERVICE RECOMMENDATIONS
STANDARD O-RING
E –30°F to +230°F EPDM GreenStripe
Recommended for hot water service within the specified tem-perature range plus a variety of dilute acids, oil-free air and many chemical services. Not recommended for petroleum services. Not recommended for steam services.
AVAILABLE O-RING
T –20°F to +180°F Nitrile OrangeStripe
Recommended for petroleum products, air with oil vapors, veg-etable and mineral oils within the specified temperature range. Not recommended for hot water services over +150°F/+66°C steam, or for hot dry air over +140°F/+60°C.
* Victaulic Carbon Steel Press System products must only be used on services compatible with o-ring and fitting materials. Incompatible services may result in leakage. For services not listed or special services, contact Victaulic for recommendations. Refer to the Victaulic Gasket Selection Guide (05.01) for specific recommendations.
WARnInG• Before attempting to install any Victaulic Carbon Steel Press System prod-
ucts, carefully read and fully understand the “Pressfit Products Installation Instructions” (I-500) and the operating and maintenance manual supplied with the tool.
Failure to follow these instructions could result in serious personal injury, property damage, product damage, joint leakage, and/or joint failure.
Style 500 Loose O-Rings
Style 500
LOOSE O-RInGS
G - _ _ _ -500-0 _ -0Refer to publication 12.02
STYLE 500 - SPARE PARTS - LOOSE O-RInGS
Nominal Size Inches
Grade “E” or “T” O-Rings
Price Each
C\v $6.50
1 7.00
1Z\x 10.50
2 14.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
* Contact Victaulic for delivery time.
WWW.VICTAULIC.COM PL2013-FP78
Carbon Steel Press System For IPS Steel Pipe SE
CTI
On
6
VIC
TAU
LIC
CA
RB
On
STE
EL P
RE
SS
SYS
TEM
Style 505 Standard Coupling
Style 505
STAnDARD COUPLInG
(P x P) F - _ _ _ -505-Z- _ -0Refer to publication 12.02
STYLE 505 – WITH STAnDARD O-RInG GRADE “E” OR “T” OR WITH OPTIOnAL O-RInG GRADE “O”
Nominal Size No. Pieces
Aprx. Weight
Each Unit Price Each †
Inches Per Bag Lbs
W/Standard O-Ring
Grade “E” or “T”
C\v 10 0.16 $30.50
1 10 0.22 32.00
1Z\v 10 0.31 37.50
1Z\x 5 0.43 42.00
2 5 0.69 54.00
† Specify choice clearly on order.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Style 510 90° Elbow
Style 510
90° ELBOW
(P x P) F - _ _ _ -510-Z- _ -0Refer to publication 12.02
STYLE 510 – WITH STAnDARD O-RInG GRADE “E” OR “T” OR WITH OPTIOnAL O-RInG GRADE “O”
Nominal Size No. Pieces
Aprx. Weight
Each Unit Price Each †
Inches Per Bag Lbs
W/Standard O-Ring
Grade “E” or “T”
C\v 10 0.42 $42.00
1 10 0.61 48.00
1Z\v 5 1.06 58.50
1Z\x 2 1.38 78.50
2 2 2.30 103.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
† Specify choice clearly on order.
Style 509 90° Elbow - Short Tangent
Style 509
90° ELBOW - SHORT TAnGEnT
(P x P ) F - _ _ _ -509-Z- _ -PRefer to publication 12.02
STYLE 509 – WITH STAnDARD O-RInG GRADE “E” OR “T” OR WITH OPTIOnAL O-RInG GRADE “O”
Nominal Size No. Pieces
Aprx. Weight
Each Unit Price Each †
Inches Per Bag Lbs
W/Standard O-Ring
Grade “E” or “T”
C\v 10 0.32 $60.00
1 10 0.50 61.50
1Z\v 5 0.80 82.00
1Z\x 2 1.04 99.00
2 2 1.50 124.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
† Specify choice clearly on order.
79
Carbon Steel Press System For IPS Steel Pipe
WWW.VICTAULIC.COM PL2013-FP
SECTIO
n 6
VIC
TAULIC
CA
RB
On
STEEL P
RE
SS
SYSTEM
Style 506 Slip Coupling
Style 506
SLIP COUPLInG
(P x P) F - _ _ _ -506-Z- _ -0Refer to publication 12.02
STYLE 506 – WITH STAnDARD O-RInG GRADE “E” OR “T” OR WITH OPTIOnAL O-RInG GRADE “O”
Nominal Size No. PiecesAprx. Weight
Each Unit Price Each †
Inches Per Bag Lbs
W/Standard O-Ring
Grade “E” or “T”
C\v 10 0.23 $42.00
1 10 0.32 52.00
1Z\v 5 0.43 63.50
1Z\x 5 0.58 78.50
2 5 0.87 100.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
† Specify choice clearly on order.
Style 511 45° Elbow
Style 511
45° ELBOW
(P x P) F - _ _ _ -511-Z- _ -0Refer to publication 12.02
STYLE 511 – WITH STAnDARD O-RInG GRADE “E” OR “T” OR WITH OPTIOnAL O-RInG GRADE “O”
Nominal Size No. PiecesAprx. Weight
Each Unit Price Each †
Inches Per Bag Lbs
W/Standard O-Ring
Grade “E” or “T”
C\v 10 0.34 $42.50
1 10 0.53 46.00
1Z\v 5 0.88 54.50
1Z\x 2 1.27 74.00
2 2 1.97 96.00
† Specify choice clearly on order.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
Style 580 Male Adapter – Threaded
Style 580
MALE ADAPTER – THREADED
(P x M) F - _ _ _ -580-Z- _ -MRefer to publication 12.02
STYLE 580 MALE ADAPTER – WITH STAnDARD O-RInG GRADE “E” OR “T” OR WITH OPTIOnAL O-RInG GRADE “O”
Nominal Size No. PiecesAprx. Weight
Each Unit Price Each †
Inches Per Bag Lbs
W/Standard O-Ring
Grade “E” or “T”
C\v x Z\x 10 0.30 $36.50
C\v 10 0.35 36.50
1 10 0.42 43.00
1 x C\v 10 0.42 46.00
1 10 0.51 48.00
1Z\v x 1Z\v 5 0.52 60.50
1Z\x x 1Z\x 5 0.81 76.50
2 x 2 5 1.17 95.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
† Specify choice clearly on order.
WWW.VICTAULIC.COM PL2013-FP80
Carbon Steel Press System For IPS Steel Pipe SE
CTI
On
6
VIC
TAU
LIC
CA
RB
On
STE
EL P
RE
SS
SYS
TEM
Style 580 Female Adapter – Threaded
Style 580
FEMALE ADAPTER – THREADED
(P x F) F - _ _ _ -580-Z- _ -FRefer to publication 12.02
STYLE 580 FEMALE ADAPTER – WITH STAnDARD O-RInG GRADE “E” OR “T” OR WITH OPTIOnAL O-RInG GRADE “O”
Nominal Size No. PiecesAprx. Weight
Each Unit Price Each †
Inches Per Bag Lbs
W/Standard O-Ring
Grade “E” or “T”
C\v x Z\x 20 0.19 $38.00
C\v 20 0.26 38.00
1 x Z\x 20 0.38 38.00
C\v 10 0.37 54.00
1 10 0.35 54.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
† Specify choice clearly on order.
Style 520 Tee – Female Reducing Branch
Style 520
TEE – FEMALE REDUCInG BRAnCH
(P X P X F) F - _ _ _ -520-Z- _ -FRefer to publication 12.02
STYLE 520 – WITH STAnDARD O-RInG GRADE “E” OR “T” OR WITH OPTIOnAL O-RInG GRADE “O”
Nominal Size No. PiecesAprx. Weight
Each Unit Price Each †
Inches Per Bag Lbs
W/Standard O-Ring
Grade “E” or “T”
C\v x Z\x 10 0.35 $61.50
1 x Z\x 10 0.41 66.50
C\v 10 0.55 62.50
1 10 0.58 70.00
1Z\v x Z\x 10 0.57 70.00
C\v 5 0.65 67.00
1 5 0.74 75.00
1Z\x x Z\x 5 0.77 74.50
C\v 5 0.85 74.50
1 5 0.91 87.00
2 x Z\x 5 1.14 94.00
C\v 5 1.22 84.50
1 5 1.28 99.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
† Specify choice clearly on order.
Style 550 Reducer Insert
Style 550
REDUCER InSERT
(P x T) F - _ _ _ -550-Z- _ -TRefer to publication 12.02
STYLE 550 – WITH STAnDARD O-RInG GRADE “E” OR “T” OR WITH OPTIOnAL O-RInG GRADE “O”
Nominal Size No. PiecesAprx. Weight
Each UnitPrice Each †
Inches Per Bag Lbs
W/Standard O-Ring
Grade “E” or “T”
1 x C\v 10 0.21 $35.00
1Z\v x C\v 10 0.26 37.00
1 10 0.29 37.50
1Z\x x 1 5 0.35 38.00
1Z\v 5 0.41 39.50
2 x 1Z\v 5 0.53 44.00
1Z\x 5 0.59 46.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
† Specify choice clearly on order.
81
Carbon Steel Press System For IPS Steel Pipe
WWW.VICTAULIC.COM PL2013-FP
SECTIO
n 6
VIC
TAULIC
CA
RB
On
STEEL P
RE
SS
SYSTEM
Style 520 Tee – Reducing Branch
Style 520
TEE – REDUCInG BRAnCH
(P x P x P) F - _ _ _ -520-Z- _ -PRefer to publication 12.02
STYLE 520 – REDUCInG BRAnCH WITH STAnDARD O-RInG GRADE “E” OR “T” OR WITH OPTIOnAL O-RInG GRADE “O”
Nominal Size No. PiecesAprx. Weight
Each Unit Price Each †
Inches Per Bag Lbs
W/Standard O-Ring
Grade “E” or “T”
1 x C\v 10 0.41 $65.50
1Z\v x C\v 10 0.55 70.00
1 10 0.58 70.00
1Z\x x C\v 5 0.73 77.50
1 5 0.76 78.50
2 x C\v 5 1.10 87.00
1 5 1.13 98.50
1Z\x 5 1.16 121.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
† Specify choice clearly on order.
Style 520 Straight Tee
Style 520
STRAIGHT TEE
(P x P x P) F - _ _ _ -520-Z- _ -PRefer to publication 12.02
STYLE 520 TEE – WITH STAnDARD O-RInG GRADE “E” OR “T” OR WITH OPTIOnAL O-RInG GRADE “O”
Nominal Size No. PiecesAprx. Weight
Each Unit Price Each †
Inches Per Bag Lbs
W/Standard O-Ring
Grade “E” or “T”
C\v 10 0.32 $63.50
1 10 0.44 68.50
1Z\v 5 0.62 82.00
1Z\x 5 0.86 93.50
2 2 1.37 116.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
† Specify choice clearly on order.
Style 520 End-of-Line – Threaded Reducing Branch
Style 520
EnD-OF-LInE TEE WITH THREADED REDUCInG BRAnCH
(P x C x F) F - _ _ _ -520-Z- _ -CRefer to publication 12.02
STYLE 520 EnD-OF-LInE TEE WITH THREADED REDUCInG BRAnCH – WITH STAnDARD O-RInG GRADE “E” OR “T” OR WITH OPTIOnAL O-RInG GRADE “O”
Nominal Size Center to EndAprx. Weight
Each Unit Price Each †
Inches Inches Lbs
W/Standard O-Ring
Grade “E” or “T”
1 x Z\x 2.90 0.49 $87.00
C\v 2.90 0.66 87.00
1 2.90 0.70 94.00
1Z\v x Z\x 3.30 0.68 94.00
C\v 3.30 0.78 90.50
1 3.30 0.89 99.00
1Z\x x Z\x 3.60 0.92 87.00
C\v 3.60 1.02 99.00
1 3.60 1.09 114.00
2 x Z\x 4.20 1.37 129.50
C\v 4.20 1.46 120.00
1 4.20 1.54 141.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
† Specify choice clearly on order.
WWW.VICTAULIC.COM PL2013-FP82
Carbon Steel Press System For IPS Steel Pipe SE
CTI
On
6
VIC
TAU
LIC
CA
RB
On
STE
EL P
RE
SS
SYS
TEM
Style 520 End-of-Line – Carbon Steel Press Reducing Branch
Style 520
EnD-OF-LInE TEE WITH CARBOn STEEL PRESS REDUCInG BRAnCH
(P x D x P) F - _ _ _ -520-Z- _ -DRefer to publication 12.02
STYLE 520 EnD-OF-LInE TEE WITH CARBOn STEEL PRESS REDUCInG BRAnCH – WITH STAnDARD O-RInG GRADE “E” OR “T” OR WITH OPTIOnAL O-RInG GRADE “O”
Nominal Size Center to EndAprx. Weight
Each Unit Price Each †
Inches Inches Lbs
W/Standard O-Ring
Grade “E” or “T”
1 x C\v 2.90 0.49 $87.00
1 2.90 0.70 90.00
1Z\v x C\v 3.30 0.66 93.50
1 3.30 0.70 94.00
1Z\x x C\v 3.60 0.88 101.00
1 3.60 0.91 104.50
2 x C\v 4.20 1.32 129.50
1 4.20 1.36 160.50
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
† Specify choice clearly on order.
Style 522 Brass Body Ball Valve
Series 522
VICTAULIC CARBOn STEEL PRESS SYSTEM BRASS BODY BALL VALVE
Carbon Steel Press System Ends (P x P) V - _ _ _ -522-Z- _ -MRefer to publication 12.02
SERIES 522 – CARBOn STEEL PRESS SYSTEM EnDS WITH O-RInG GRADE “E” OR “T” OR WITH OPTIOnAL O-RInG GRADE “O”
Nominal Size End to EndAprx.
Weight Each Price Each †
Inches Inches Lbs
Carbon Steel Press System Ends
(P x P) With Grade “E” or “T”
O-Ring
C\v 6.46 1.3 $238.50
1 7.56 2.0 289.00
1Z\v 8.28 2.8 379.00
1Z\x 8.97 3.7 511.00
2 10.69 4.7 587.00
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
† Specify choice clearly on order.
83
Carbon Steel Press System For IPS Steel Pipe
WWW.VICTAULIC.COM PL2013-FP
SECTIO
n 6
VIC
TAULIC
CA
RB
On
STEEL P
RE
SS
SYSTEM
WWW.VICTAULIC.COM PL2013-FP84
Section 7 – Pipe Preparation Tools
Pipe Preparation Tools
LEASE PURCHASE AGREEMEnT
Some tools manufactured by Victaulic are available through a lease purchase agreement. Contact Victaulic for details.
85WWW.VICTAULIC.COM PL2013-FP
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
Vic-Easy® Roll Grooving Tools – Field PortableVE12
Vic-Easy® Roll Grooving Tools – Field Portable
VE12 VE12 is designed for manual grooving of C\v – 2” steel, stainless steel, aluminum and PVC pipe.
Tool Model Part Number
Tool Weight/ Shipping Weight
Lbs.Rental
Per MonthTool
List Price
VE12 R000012VE0 17/20 $741.00 $1594.50
VE12 RATInGS – MAXIMUM CAPACITY †
Pipe Material Pipe Size/Schedule
VE12 ³⁄4 1 1¹⁄4 1¹⁄2 2
VE12 – Steel 5 – 10 5 – 40
VE12 – Stainless 40S only
VE12 – Aluminum * 5 – 10 5 – 40
VE12 – PVC Plastic 40
VE12SS – Light Wall Stainless 5 – 10
† Indicates pipe size capacity. For wall thickness capacity and general tool ratings see separate Vic-Easy Tool Rating Data in publication 24.01.
* 6061-T4 or 6063-T4 Alloy must be used.
VE26 S/C
VE26 VE26 is designed for manual grooving of 2 – 6” steel, stainless steel, aluminum, PVC, and copper tube.
Tool Model Part Number
Tool Weight/ Shipping Weight
Lbs.Rental
Per MonthTool
List Price
VE26S – Steel, Stainless Steel R100026VE0 22/25 $705.00 $1511.50
VE26C – Copper Tube R200026VE0 22/25 705.00 1511.50
VE26SS – Lightwall Stainless Steel R700026VE0 22/25 705.00 1511.50
VE26P – Aluminum and PVC Pipe R750026VE0 22/25 705.00 1511.50
VE26 RATInGS – MAXIMUM CAPACITY †
Pipe Material Pipe Size/Schedule
VE26 2 2¹⁄₂ 3 3¹⁄₂ 4 5 6
VE26S – Steel 5 – 40 5 – 10
VE26S – Stainless 40S Only
VE26C – Copper K, L, M and DWV
VE26P – Aluminum * 5 – 40 5 – 10
VE26P – PVC Plastic 40
VE26SS – Lt. Wall SS 5S – 10S
† Indicates pipe size capacity. For wall thickness capacity and general tool ratings see separate Vic-Easy Tool Rating Data in publication 24.01.
* 6061-T4 or 6063-T4 Alloy must be used.
VE26/VE46 Power Drive Kit
VE26/VE46 Power Drive Kit
Power Drive Kit for the updated VE26 and VE46 In-Place Roll Grooving Tools allows for the new and improved VE26/VE46 to alternately groove pipe using stationary power drive.
Tool Model Part Number
Tool Weight/ Shipping Weight
Lbs.Rental
Per MonthTool
List Price
VE26/VE46 Power Drive Kit R075-026-KIT 7/9 N/A $279.50
WWW.VICTAULIC.COM PL2013-FP86
Pipe Preparation ToolsSE
CTI
On
7
PIPE
PR
EPA
RAT
IOn
TO
OLS
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
VE46
VE46 VE46 is designed for manual grooving of 3Z\x – 6” steel, stainless steel, aluminum and PVC.
Tool Model Part Number
Tool Weight/ Shipping Weight
Lbs.Rental
Per MonthTool
List Price
VE46 – Steel R000046VE0 28/31 $775.50 $1827.50
VE46P – Aluminum and PVC Plastic R200046VE0 28/31 775.50 1827.50
VE46 RATInGS – MAXIMUM CAPACITY †
Pipe Material Pipe Size/Schedule
VE46 3¹⁄₂ 4 4¹⁄₂ 5 6
VE46 – Steel 5 – 40
VE46 – Stainless 40S Only
VE46P – Aluminum * 5 – 40
VE46P – PVC Plastic 40 40 – 80
† Indicates pipe size capacity. For wall thickness capacity and general tool ratings see separate Vic-Easy Tool Rating Data in publication 24.01.
* 6061-T4 or 6063-T4 Alloy must be used.
VE226 B/S/M/C/BSS/MSS/P
VE226 B/S/M/C/BSS/MSS/P †
VE226 is designed for use with a standard C\,” square drive for roll feed with operator supplied ratchet wrench to roll groove C\v – 6” steel, stainless steel, aluminum, PVC and copper tube. Included are feeler gauges and allen wrench for depth stop setting. Built-on mount fits Victaulic VPD752 and Ridgid 300® power drives (other drive mounts available, including Oster 310, Ridgid 535, Ridgid 1224 and Ridgid 1822).
Tool Model Part Number
Tool Weight/ Shipping
Weight Lbs.
Rental Per Month
Tool List Price ^
VE226B – C\v – 1Z\x”/26 – 48 mm R2022260FS 27/42 $768.50 $1692.00
VE226S – 1Z\v – 6”/42 – 168 mm R2002260FS 27/42 768.50 1692.00
VE226M – 2 – 6”/60 – 168 mm R3002260FS 27/42 768.50 1692.00
VE226C – 2 – 6”/60 – 168 mm R1002260FS 27/42 768.50 1692.00
VE226BSS – C\v – 1Z\x”/26 – 48 mm R00X2260FS 27/42 768.50 1692.00
VE226MSS – 2 – 6”/60 – 168 mm RXM02260FS 27/42 768.50 1692.00
VE226P – 2 – 6”/60 – 168 mm Aluminum and PVC Plastic R6002260FS 27/42 768.50 1692.00
† NOTE: When ordering tools that require a power drive, you must determine the type of drive to be used.
^ For proper operation, a power drive and pipe stand are required. See Accessories for details.
VE226 RATInGS – MAXIMUM CAPACITY †
Pipe Material Pipe Size/Schedule
VE226 ³⁄₄ 1 1¹⁄₄ 1¹⁄₂ 2 2¹⁄₂ 3 3¹⁄₂ 4 4¹⁄₂ 5 6
VE226S – Steel 5 – 40 5 – 10
VE226S – Stainless 40S Only
VE226B – Steel 5 – 40
VE226B – Stainless 40S Only
VE226B – Aluminum * 5 – 40
VE226B – PVC Plastic 40 40 – 80
VE226M – Steel 5 – 40 5 – 10
VE226M – Stainless 40S Only
VE226C – Copper K, L, M and DWV
VE226BSS – Lt. Wall SS 5S – 10S
VE226MSS – Lt. Wall SS 5S – 10S
VE226P – Aluminum * 5 – 40 5 – 10
VE226P – PVC Plastic 40 – 80 40
† Indicates pipe size capacity. For wall thickness capacity and general tool ratings see separate Vic-Easy Tool Rating Data in publication 24.01.
* 6061-T4 or 6063-T4 Alloy must be used.
87
Pipe Preparation Tools
WWW.VICTAULIC.COM PL2013-FP
SECTIO
n 7
PIP
E P
REPA
RATIO
n TO
OLS
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
VE226 Power Drive Kit
VE226 Power Drive Kit Kit for connecting a VE226 Roll Grooving Tool to a Ridgid * 700 Power Drive. * Ridgid is a registered trademark of the Ridge Tool Company.
Tool Model Part Number
Tool Weight/ Shipping Weight
Lbs.Rental
Per MonthTool
List Price
VE226 Power Drive Kit † R700-226-KIT 75/115 N/A $2752.50
† Drive unit not included.
* Ridgid is a registered trademark of the Ridge Tool Company. Ridgid 700 not included in kit.
WWW.VICTAULIC.COM PL2013-FP88
Pipe Preparation ToolsSE
CTI
On
7
PIPE
PR
EPA
RAT
IOn
TO
OLS
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
Vic-Easy Roll Grooving Tools – Field FabricationVE106
Vic-Easy Roll Grooving Tools – Field Fabrication
VE106 Groove-N-Go VE106 portable roll grooving tool with a self-contained power drive provides capability of grooving 1Z\v – 6”/32 – 150 mm pipe, up to and including Schedule 40. The tool requires 110V, 15-amp power source. Tool is supplied complete with 1Z\v – 3”/25 – 80 mm carbon steel roll sets; 4 – 6”/100 – 150 mm carbon steel rolls are installed.
Tool Model Part Number
Tool Weight/ Shipping Weight
Lbs.Rental
Per MonthTool
List Price
VE106 Groove-N-Go 110V R000106110 140/200 N/A $5332.50
VE106 Groove-N-Go 220V R000106220 140/200 N/A 5332.50
VE106 RATInGS – MAXIMUM CAPACITY †
Pipe Material Pipe Size/Schedule
VE106 1¹⁄4 1¹⁄2 2 2¹⁄2 3 3¹⁄2 4 5 6
Steel 5 – 40 Std. Rolls
Stainless 40S Std. Rolls
Lt. Wall SS 5S – 10S RX Rolls*
Copper K, L, M and DWV Copper Rolls
† Indicates pipe size capacity. For wall thickness capacity and general tool ratings see separate Vic-Easy Tool Rating Data in publication 24.01.
* RX Rolls – “RX” is the Victaulic part code designator for grooving roll sets specifically designed for roll grooving lightwall stain-less steel pipe.
VE106 GROOVInG ROLLS *
Pipe Material Part NumberPipe Size
Range
Purchase List Price
Each Set †
Standard
R912106UA6 1Z\v – 6” Upper $169.00
R912106L03 1Z\v – 3” Lower 475.00
R904106L06 4 – 6” Lower 475.00
Copper RR02106006 2 – 6” 665.00
Stainless RX RX12106L06 1Z\v – 6” Lower 525.00
EndSealRZ02106003 1Z\v – 3” Set 695.50
RZ04106006 4 – 6” Set 695.50
Rolls and roll sets for discontinued models may be purchased. Please contact Victaulic for details. § ROLLS CAN ONLY BE RENTED WITH A TOOL RENTAL. Contact Victaulic for details. Any rental tool requiring extra rolls, in addition to standard rolls supplied, such as RR (Copper), RX (Stainless Steel), RP (Plastic), RZ (EndSeal) will incur an additional rental charge per roll set. † Upper and lower rolls (1 of each per set) can be sold separately. Contact Victaulic. * Refer to How to Order at the end of this section.
89
Pipe Preparation Tools
WWW.VICTAULIC.COM PL2013-FP
SECTIO
n 7
PIP
E P
REPA
RATIO
n TO
OLS
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
VE272SFS
VE272SFS The VE272SFS portable roll groover mounts easily to the Victaulic VPD752 or Ridgid 300® Power Drive. The VE272SFS is operated using a hand pump. A unique pivot arm design reduces handle effort. Roll changes are quick and easy. The VE272SFS is also equipped with Victaulic Company’s patented, Enhanced-Tracking grooving rolls. The tool is supplied complete with 2 – 12” roll sets; 8 – 12” rolls are installed.
NOTE: Optional C\v and 1 – 1Z\x” grooving rolls available.
Requires a VPD752 or Ridgid 300 power drive.
Tool Model Part Number
Tool Weight/ Shipping Weight
Lbs.Rental
Per MonthTool
List Price
VE272SFS R000272SFS 184/250 $1210.50 $6436.50^
Optional Stabilizer (8 – 12” / 219.1 – 323.9 mm only) R4002720FS – 124.00 1747.50
† NOTE: When ordering tools that require a power drive, you must determine the type of drive to be used.
^ For proper operation, a power drive and pipe stand are required. See Accessories for details.
VE272SFS RATInGS – MAXIMUM CAPACITY †
Pipe Material Pipe Size/Schedule
VE272SFS ³⁄₄ 1 1¹⁄₄ 1¹⁄₂ 2 2¹⁄₂ 3 3¹⁄₂ 4 5 6 8 10 12
Steel 5 – 40 Std. Rolls 5 – 20Std. Rolls
Stainless 40S Std. Rolls
Lt. Wall SS 5S – 10S RX Rolls
Aluminum *‡ 5 – 40 RP Rolls 5 – 20RP Rolls
PVC Plastic ‡ 40 ‡§ 40 –80 RP Rolls 40 ‡
Copper K, L, M and DWV Copper Rolls
† Indicates pipe size capacity. For wall thickness capacity and general tool ratings see separate Vic-Easy Tool Rating Data in publication 24.01.
‡ Use RP Rolls.* 6061-T4 or 6063-T4 must be used. RP Rolls must be used.
§ A special lower roll exclusively for grooving 2” Sch. 80 PVC is available. Part. No. RP02272L02
VE272SFS GROOVInG ROLLS *
Pipe Material
Part Number
Pipe Size Range
Purchase List Price
Each Set †
Standard
R900268001 C\v” $2472.50
R900268002 1 – 1Z\x” 2130.50
R902272003 2 – 3Z\x” 1196.50
R904272006 4 – 6” 1278.50
R908272012 8 – 12” 1425.50
CopperRR02272006 2 – 6” 1483.00
RR08272008 8” 2083.00
Stainless RX
RX75268001 C\v” +
RX01268002 1 – 1Z\x” +
RX02272003 2 – 3Z\x” 1668.00
RX04272006 4 – 6” 1789.50
RX08272012 8 – 12” 1792.50
Endseal
RZ02272003 2 – 3Z\x” 1947.00
RZ04272006 4 – 6” 1991.00
RZ08272012 8 – 12” 2071.50
PVC/Aluminum
RP02272003 2 – 3Z\x” 1286.50
4 – 6” +
RP08272012 8” 1555.00
Rolls and roll sets for discontinued models may be purchased. Please contact Victaulic for details. § ROLLS CAN ONLY BE RENTED WITH A TOOL RENTAL. Contact Victaulic for details. Any rental tool requiring extra rolls, in addition to standard rolls supplied, such as RR (Copper), RX (Stainless Steel), RP (Plastic), RZ (EndSeal) will incur an additional rental charge per roll set. † Upper and lower rolls (1 of each per set) can be sold separately. Contact Victaulic. * Refer to How to Order at the end of this section.
+ Quoted on application. Contact Victaulic for pricing and availability.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
WWW.VICTAULIC.COM PL2013-FP90
Pipe Preparation ToolsSE
CTI
On
7
PIPE
PR
EPA
RAT
IOn
TO
OLS
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
Vic-Easy Roll Grooving Tools – Shop FabricationVE268
Vic-Easy Roll Grooving Tools – Shop FabricationNOTE: All shop models shipped set for 220 power, unless specified otherwise.
VE268 † Fully-motorized, semi-automatic, electro-hydraulic tool complete with safety guards, safety foot switch and power cord. The VE268 requires a 220/440V, 3 phase, 60 hertz power supply for operation and is equipped with a pipe stabilizer for 8 – 12” nominal pipe sizes to prevent pipe sway. The tool is shipped fully assembled for standard grooving (2 – 12” pipe) * (8 – 12” rolls are installed, unless otherwise speci-fied).
NOTE: Optional C\v and 1 – 1Z\x” grooving rolls available.
Request RP-268 for power requirements or visit the Victaulic web site.
† These tools are rated for 220 volt service. They cannot be used with 208 volt service. For individual amperage power requirements, refer to RP sheet supplied with tool. Each model may require differ-ent incoming power requirements. (If your service is 208 volts, a “Boost and Buck Transformer” may be required.)
Tool Model Part Number
Tool Weight/ Shipping Weight
LbsRental
Per MonthTool
List Price
VE268 R000268VE0 735/766 $2896.00 $26142.00^
^ For proper operation, a pipe stand is required. See Accessories for details.
VE268 RATInGS – MAXIMUM CAPACITY †
Pipe Material Pipe Size/Schedule
VE268 ³⁄₄ 1 1¹⁄₄ 1¹⁄₂ 2 2¹⁄₂ 3 3¹⁄₂ 4 5 6 8 10 12
Steel 5 – 40 Std. Rolls 5 – 20Std. Rolls
Stainless 40S Std. Rolls
Lt. Wall SS 5S – 10S RX Rolls
Aluminum *‡ 5 – 40 RP Rolls 5 – 20RP Rolls
PVC Plastic ‡ 40 ‡§ 40 – 80 RP Rolls 40 ‡
Copper K, L, M and DWV Copper Rolls
† Indicates pipe size capacity. For wall thickness capacity and general tool ratings see separate Vic-Easy Tool Rating Data in publication 24.01.
‡ Use RP Rolls.* 6061-T4 or 6063-T4 must be used. RP Rolls must be used.
§ A special lower roll exclusively for grooving 2” Sch. 80 PVC is available. Part. No. RP02272L02
91
Pipe Preparation Tools
WWW.VICTAULIC.COM PL2013-FP
SECTIO
n 7
PIP
E P
REPA
RATIO
n TO
OLS
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
VE268 GROOVInG ROLLS *
Pipe Material
Part Number
Pipe Size Range
Purchase List Price
Each Set †
Standard
R900268001 C\v” $2472.50
R900268002 1 – 1Z\x” 2130.50
R902272003 2 – 3Z\x” 1196.50
R904272006 4 – 6” 1278.50
R908272012 8 – 12” 1425.50
CopperRR02272006 2 – 6” 1483.00
RR08272008 8” 2083.00
Endseal
RZ02272003 2 – 3Z\x” 1947.00
RZ04272006 4 – 6” 1991.00
RZ08272012 8 – 12” 2071.50
Stainless RX
RX75268001 C\v” +
RX01268002 1 – 1Z\x” +
RX02272003 2 – 3Z\x” 1668.00
RX04272006 4 – 6” 1789.50
RX08272012 8 – 12” 1792.50
PVC/Aluminum
RP02272003 2 – 3Z\x” 1286.50
Contact Victaulic4 – 6” +
8” +
+ Quoted on application. Contact Victaulic for pricing and availability.
Rolls and roll sets for discontinued models may be purchased. Please contact Victaulic for details. NOTE: ROLLS CAN ONLY BE RENTED WITH A TOOL RENTAL. Contact Victaulic for details. Any rental tool requiring extra rolls, in addition to standard rolls supplied, such as RR (Copper), RX (Stainless Steel), RP (Plastic), RZ (EndSeal) will incur an additional rental charge per roll set. † Upper and lower rolls (1 of each per set) can be sold separately. Contact Victaulic. * Refer to How to Order at the end of this section.
NOTE: Items listed in shaded areas are non-cancellable and non-returnable.
WWW.VICTAULIC.COM PL2013-FP92
Pipe Preparation ToolsSE
CTI
On
7
PIPE
PR
EPA
RAT
IOn
TO
OLS
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
Vic-Easy Tool AccessoriesVPD752 Victaulic Power Drive
Vic-Easy Tool Accessories
Victaulic Power Drive – VPD752
Power drive features safety foot switch and bi-directional speed chuck. Z\x horsepower, 15 amp motor operates on standard 120V power source.
VPD753 for single phase, 220V power source also available. Contact Victaulic for pricing.
Capacities: See appropriate tool. †
Optional: Universal Drive Shaft.
Tool Model Part Number
Tool Weight/ Shipping Weight
LbsRental
Per MonthTool
List Price
Victaulic Power Drive - VPD752 110V R000752110 140/165 $968.50 $6898.00
Victaulic Power Drive - VPD753 220V R000753220 140/165 968.50 6898.00
† Indicates pipe size capacity. For wall thickness capacity and general tool ratings see separate Vic-Easy Tool Rating Data in publication 24.01.
VAPS112 Pipe Stand
VAPS112 Vic-Easy Adjustable Pipe Stands are portable and self-standing units. Turnstile design allows pipe to be spun around for grooving of both pipe ends without dismounting pipe from stand. Unique trough design allows for rotational and forward/traverse movement. They are designed for direct use with Vic-Easy roll grooving tools: VE272SFS, VE268, VE270FSD.
Capacities: 1 – 12” IPS pipe †
Load Rating: 1075 lbs
Vertical Stroke: 14Z\x” for adjusting rod; 8Z\x” leg adjustment; 23” total
Min. Pipe Height from Floor: 23” on 12” pipe; 21” on 1” pipe
Handle Effort Required to Raise 1800 lbs Load: 50 lbs Max.
Tool Model Part Number
Tool Weight/ Shipping Weight
LbsRental
Per MonthTool
List Price
VAPS 112 R000112PS0 190/220 $725.00 $5225.50
† Indicates pipe size capacity. For wall thickness capacity and general tool ratings see separate Vic-Easy Tool Rating Data in publication 24.01.
93
Pipe Preparation Tools
WWW.VICTAULIC.COM PL2013-FP
SECTIO
n 7
PIP
E P
REPA
RATIO
n TO
OLS
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
Hole Cutting ToolsVHCT900
Hole Cutting Tools
VHCT900 Includes three-piece hole cutting tool (Base, drill motor and feed assembly), arbor assembly, coupon remover, 2 pilot drills with coupon retaining springs and operating instructions. Requires grounded 120/1/60 – 10 amp electrical supply. (220/1/60 – 10 amp no cost option)
Capacities: 1 – 3Z\x” holes for Z\x – 3” Mechanical-T, Vic-Let connections.
Tool Model Part Number
Tool Weight/ Shipping Weight/
LbsRental
Per MonthTool
List Price
VHCT900 R000900HCT 36/61 $1572.00 $4816.50
The 1” Arbor is optional. Hole saw blades available from Victaulic. See accessories below.
HCT908
HCT908 The HCT908 Hole Cutting Tool is a one-piece tool designed to cut holes up to 4Z\x” carbon and stainless steel pipe. This allows for use of Mechanical-T®, Vic-Let®, Vic-O-Well and Style 922 Outlet Tee. The speed is variable and requires 110 volt power supply to operate.
Capacities: 1 – 4Z\x” holes for Z\x – 4” Mechanical-T, Vic-Let connections.
Tool Model Part Number
Tool Weight/ Shipping Weight
LbsRental
Per MonthTool
List Price
HCT908 R000908HCT 35/48 $650.00 $2939.00
The 1” Arbor is optional. Hole saw blades available from Victaulic. See accessories below.
Vic-Press ToolPFT510
Vic-Press® Tool
PFT510 Vic-Press® Tool
The Vic-Press tool for ASTM A-312 Schedule 10S stainless steel pipe arrives in 2 carrying cases and includes:
Case 1 – PFT510 Vic-Press tool, 2 batteries, 120 VAC charger, wire brush, and 1 tube of lubricant
Case 2 – Z\x”, C\v”, and 1" jaws, 1Z\x” and 2" ring-jaws, ring-jaw adapter jaw, insertion gauge set
WARNING: The PFT510 Vic-Press tool is designed for use only with Vic-Press Schedule 10S system cou-plings, valves and fittings. Do not attempt to install Schedule 5 Carbon Steel Press products with this tool. Failure to follow this instruction could cause system failure resulting in serious personal injury and prop-erty damage. Refer to TM-PFT510 for complete tool operating instructions.
Tool Model Part Number
Tool Weight/ Shipping Weight
LbsTool
List Price
PFT510 Vic-Press Tool R120510PFT 102 $7975.00
WWW.VICTAULIC.COM PL2013-FP94
Pipe Preparation ToolsSE
CTI
On
7
PIPE
PR
EPA
RAT
IOn
TO
OLS
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
How to Order
How to Order When ordering tools or tool parts, please include the following information:A. PARTS ORDERS1. Tool Model Number. Example: VE272SFS. 2. Tool Serial Number. The serial number can be found on the tool name plate.3. Part Number and Description. Example: Part #09, R-201-261-0FS, Pump. 4. Where to send the part(s). Company Name, Address and Telephone Number5. Attention: Person†™s Name6. Purchase Order Number. Order parts from the nearest Victaulic Sales Office. Consult back cover of this Price List for locations. B. TOOL ORDERS1. Tool Model Number. Example: VE416FSD. 2. Tool Description. Example: Vic-Easy VE416FSD Roll Grooving Tool. 3. Where to send the tool. Company Name, Address and Telephone Number4. Attention: Person†™s Name5.Purchase Order Number. Order tool from the nearest Victaulic Sales Office. Consult back cover of this Price List for locations. C. TOOL RENTAL ORDER1. A completed and signed tool rental agreement. 2. Purchase Order Number. 3. Tool Model Number. Example: VE272SFS4. Tool Description. Example: Vic-Easy VE272SFS Roll Grooving Tool. 5. Where to send the tool. Company Name, Address and Telephone6. Attention: Person's Name. Order tool from the nearest Victaulic Sales Office. Consult back cover of this Price List for locations. NOTES: Aluminum pipe must consist of 6061-T4 or 6063-T4 alloys for roll grooving. PVC grades that can be grooved – PVC Type I Grade I – PVC 1120; PVC Type I Grade II – PVC 1220; PVC Type II Grade I – PVC 2116. Copper/nickel pipe - contact Victaulic for details. Light weight stainless steel pipe (Sch. 10S and Sch. 5S) must be grooved using stainless Rx and RWX roll sets. Note: Vic-Easy tools and rolls shown on this chart will produce grooves in accordance with Victaulic Roll Groove Dimension charts and to ANSI/AWWA C-606 standards. SPECIAL NOTE: All roll grooving tools will be stocked with standard rolls only. No substitution will be done. Optional rolls are available at an additional cost.
95
Pipe Preparation Tools
WWW.VICTAULIC.COM PL2013-FP
SECTIO
n 7
PIP
E P
REPA
RATIO
n TO
OLS
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
Terms and Conditions of Tool Rental
TERMS AND CONDITIONS OF TOOL RENTAL1. Lessor rents to Lessee and Lessee leases from Lessor the tool(s) and accessories listed on the reverse side hereof, which are designed for use in the preparation
of pipe to receive Victaulic products, hereinafter called the leased property; for the term specified, commencing when the leased property is delivered to carrier for delivery to Lessee.
2. Rental Rate. Lessee agrees to pay rent at the rates specified on this agreement. The rental shall be due and payable at the end of each month during the term of the lease. Terms of payment: net 30 days from date of invoice. If lease is terminated any time during the initial month, the rental shall be payable at the then current published monthly rental rate. If lease is terminated any time during a subsequent month, the rental will be prorated. (This agreement is valid for one (1) year, at the time of signing. It will be automatically renewed with price in effect at the time of renewal until the signee terminates the agreement.)
3. On-Account Payment. Lessee, on executing the agreement, has made an on-account payment to Lessor which shall be returned to Lessee upon termina-tion of the lease, or applied to any open invoices on the Lessee's account, provided Lessee is not in default under any of the term of the lease and has returned leased property in good condition, less ordinary wear and tear.
4. Freight. Outbound: F.O.B. Shipping Point (Our Option) – Freight Collect. Return: Lessee shall pay all shipping charges for return of the leased property.
5. Use. All leased property is for the exclusive use of Lessee only, and may not be assigned, transferred, sublet or loaned to or used by any other party, without prior written consent of the Lessor.
6. Ownership. The property leased is and shall at all times remain the sole property of the Lessor, and Lessee shall have no right, title or interest therein except as expressly set forth in this Lease.
7. Taxes. Lessee shall pay all taxes, assessments, license and registration fees levied on the leased property while in the Lessee's possession and Lessee shall keep the leased property free and clear of all liens and encumbrances. Lessee shall pay all sales taxes invoiced by Victaulic Company unless the lessee provides the lessor with a valid sales tax exemption certificate for the state where the tool is delivered.
8. Access. Lessor shall at all times have free access to the leased property and to the premises on which located, for the purpose of examining the leased property.
9. Return of Property. Lessee shall return all leased property, properly crated, freight prepaid, and insured for its market value to Lessor at one of the locations indicated on the back cover. If Lessee fails to return the leased property upon termination, Lessee shall pay rent at the then current monthly rental rate until returned, and Lessor shall also have the right to remove the leased property from Lessee's premises, without recourse to any legal proceedings.
10. Repairs and Servicing. If leased property, excluding Tool Bits, becomes worn or unserviceable from normal recommended use, Lessor will supply replacement tools and/or parts, without cost, upon return of the leased property to Lessor.
11. Damage or Loss. If leased property is damaged by reason of other than normal recommended use, Lessee shall indemnify Lessor for the cost of repairs. If leased property is not returned to Lessor in accordance with the terms of this Agreement for any cause or reason whatsoever, including, without limiting the generality of the foregoing, loss, theft, damage, accident, neglect, abuse or destruction, by fire or otherwise, whether due to Lessee's fault or not, Lessee shall pay to Lessor as liquidated damages an amount to be determined by Lessor not to exceed the list price of all leased property, as published in the most current Victaulic price list for Pipe Preparation tools.
12. Indemnity. Lessee assumes full responsibility for the operation of the leased property and shall indemnify, protect, save and keep harmless the Lessor, its agents and servants from and against all losses, damages, penalties, claims, actions, suits, costs, expenses and disbursements, including legal expenses of what-soever kind in nature imposed upon, incurred by, or asserted against the Lessor in any way relating to or arising out of this Lease or of the Lessee's delivery, pos-session, use, operation or return of the leased property. The indemnities contained in this paragraph shall continue in full force and effect, notwithstanding the termination of this Lease.
13. Lessor's remedies on default. If the Lessee, with regard to any item or items of property, fails to pay any rent or other amount herein provided when the same shall become due and payable, or if the Lessee, with regard to any item or items of leased property, fails to observe, keep or perform any other provisions of this lease required to be observed, kept, or performed by the Lessee, or if any execution or other writ or process shall be issued in any action or proceeding against the Lessee, whereby the said leased property may be taken, the Lessor shall have the right to exercise any one or more of the following remedies:
(a) To declare the entire amount of rent hereunder immediately due and payable as to any or all items of leased property, without notice or demand to the Lessee. (b) To sue for and recover all rents, and other payments, then accrued or thereafter accruing, with respect to any or all items of leased property. (c) To take possession of any or all items of leased property without demand or notice, wherever the same shall be located, without any court order or other pro-cess of law. The Lessee hereby waives any and all damage occasioned by such taking of possession. Any said taking of possession shall not constitute a termina-tion of this lease as to any or all items of leased property unless the Lessor expressly so notifies the Lessee in writing. (d) To terminate this lease as to any or all items of leased property. (e) To pursue any other remedy at law or in equity. Notwithstanding any such repossession or any other action, which the Lessor may take, the Lessee shall be and remain liable for the full performance of all obli-gations on its part to be performed under this lease; provided however, that if the Lessor is able to obtain any monies for said leased property from re-rental or sale thereof, which the Lessor specifically is not in any manner obligated to do, said monies, less expenses, shall be credited to the last payments of the Lessee's obligation. Waiver of any default herein is not a waiver of any subsequent default. All such remedies are cumulative and may be exercised concurrently or sepa-rately.
14. Bankruptcy. Neither this lease nor any interest therein is assignable or transferable by operation of law. If any proceeding under the Bankruptcy Act, as amended, is commenced by or against the Lessee, or if the Lessee is adjudged insolvent, or if the Lessee makes any assignment for the benefit of his creditors, or if a writ of attachment or execution is levied on any item or items of leased property and is not released or satisfied within 10 days thereafter, or if a receiver is appointed in any proceeding or action, to which the Lessee is a party, with authority to take possession or control of any item or items of the leased property, the Lessor shall have any may exercise any one or more of the remedies set forth in Paragraph 13 hereof; and this lease shall, at the option of the Lessor, without notice immediately terminate and shall not be treated as an asset of the Lessee after the exercise of said option.
15. Concurrent Remedies: The rights and remedies provided in this lease for the benefit of the Lessor shall be cumulative and shall not be exclusive but in addi-tion to any other remedies to which the Lessor may be entitled. the Lessee waives trial by jury in any action or proceeding arising hereunder.
16. Lessor's expenses: The Lessee shall pay the Lessor all costs and expenses, including attorney's fees, incurred by the Lessor in exercising any of its rights or rem-edies hereunder or enforcing any of the terms, conditions, or provisions hereof.
17. Binding Effect of Lease. This lease agreement shall inure to the benefit of and be binding upon the parties hereto and their respective heirs, executors, administrators, personal or legal representatives, successors and assigns.
18. Applicable Law and Severability. This lease shall be governed by and construed under the laws of the State of Pennsylvania. If any provision herein is invalid, it shall be considered deleted from this lease, and shall not invalidate the remaining provisions of this lease.
WWW.VICTAULIC.COM PL2013-FP96
Pipe Preparation ToolsSE
CTI
On
7
PIPE
PR
EPA
RAT
IOn
TO
OLS
Thoroughly Read and Understand All Operating and Maintenance Instructions Before Attempting to Use any Victaulic Pipe Preparation Tools.
Terms and Conditions of Tool Sale
TERMS AND CONDITIONS OF TOOL SALEControlling Provisions: These terms and conditions shall control with respect to any purchase order or sale of Victaulic products.
No alteration, modification or waiver of these terms and conditions whether on Customer's purchase order or otherwise shall be valid unless the alteration, modification or waive is specifically accepted in writing by an authorized representative of Victaulic.
Prices, Designs and Terms and Conditions of Sale are subject to change without notice.
Minimum Order: $100.00 net for any single order.
Terms of Payment: As stated on invoice. Maximum permissible interest rate thereafter.
Shipping Terms: F.O.B. shipping point (our option), freight prepaid and allowed on single orders having a net price value of $7,500 and over, for shipment at one time to one destination within the continental United States, excluding Alaska, Hawaii, Puerto Rico and U.S. posses-sions.
Shipments beyond the borders of the United States are prepaid and chargeable or collectable to final destination.
The most economical routing to recognized delivery points will be used, at our discretion. If special routing is desired, orders should so state.
Orders are accepted subject to approval of our General Office and Credit Department at Easton, Pennsylvania, and contingent upon acts of God, war, civil disturbance, strikes, labor difficulties, delays of carriers, inability to obtain materials, accidents or any other cause beyond our control.
Shipping dates are estimated as closely as possible. We use our best efforts to ship within the time estimated, but cannot guarantee to do so. In the event production or shipment is delayed, we reserve the privilege of changing shipping estimate. Under no circumstances shall Victaulic be liable for damages of any kind, including but not limited to incidental or consequential damages for lost profits or lost sales or liquidated damages, directly or indirectly arising from delays or failure to meet shipping dates.
Orders, when accepted, cannot be countermanded without our written consent. No material will be taken back without our written con-sent. Orders for non-standard material may not be cancelled nor will we accept return of such material for credit.
All material is carefully examined, counted and packed by experienced employees. Claims for corrections must be made within 10 days of receipt of goods. Our responsibility ceases when goods are delivered to carrier in good condition and its receipt obtained. Carriers are responsible for goods lost, damaged or delayed in transit. For your own protection, have transportation company's agent verify damages, shortages or delays and note them on freight bill over his signature.
Weights: All weights are approximate shipping weights and subject to change without notice.
Victaulic Company maintains a continual policy of product improvement and, therefore, reserves the right to change prod-uct specifications, designs, and standard equipment without notice and without incurring obligation.
WARRANTYStandard product warranty applies. See Inside Back Cover.
nOTE: Reconditioned tools shall be warranted 30 days from date of purchase.
97
Pipe Preparation Tools
WWW.VICTAULIC.COM PL2013-FP
SECTIO
n 7
PIP
E P
REPA
RATIO
n TO
OLS
Terms and Conditions of Sale
Terms and Conditions of SaleCONTROLLING PROVISIONS: These terms and conditions shall control with respect to any purchase order or sale of Victaulic products.
No alteration, modification or waiver of these terms and conditions whether on Customer's purchase order or otherwise shall be valid unless the alteration, modification or waiver is specifically accepted in writing by an authorized representative of Victaulic.
Prices, Designs and Terms and Conditions of Sale are subject to change without notice.
TERMS OF PAYMENT: As stated on inovice. Maximum legal interest rate charged thereafter.
MINIMUM INVOICE CHARGES: $100 net for any single order.
SHIPPING TERMS: F.O.B. shipping point (our option) freight prepaid and allowed on single orders having a net price value of $7500 and over, for shipment at one time to one destination into distributor stock, as determined by Victaulic within the continental United States, excluding Alaska, Hawaii, Puerto Rico and U.S. possessions.
Shipping and handling charges on orders less than net price value of $7500, F.O.B. shipping point (our option) will be paid by the customer. The most economical routing to recognized delivery points will be used, at our discretion. The cost of any special routing, packaging or han-dling that has been requested by the customer, and is a deviation to our normal handling methods, will be added to the order and paid by the customer.
Shipments beyond the borders of the United States are prepaid and chargeable or collectable to final destination.
Orders are accepted subject to approval of our General Office and Credit Department at Easton, Pennsylvania, and contingent upon acts of God, war, civil disturbance, strikes, labor difficulties, delays of carriers, inability to obtain materials, accidents or any other cause beyond our control.
Victaulic will endeavor to ship by the scheduled delivery date, but reserves the right to ship within a reasonable period thereafter. Under no circumstances shall Victaulic be liable for damages of any kind, including but not limited to incidental or consequential dam-ages for lost profits or lost sales or liquidated damages, directly or indirectly arising from delays or failure to meet shipping dates.
Orders, when accepted, cannot be cancelled without our written consent. No material will be taken back without our written consent. Orders for non-standard (i.e. non-cancellable/non-returnable) material may not be cancelled nor will Victaulic accept return of such material for credit. Victaulic reserves the right to change the designation of products from standard to non-standard and vice versa. This may be done at any time without notice, and without incurring obligation. For further information con-tact Victaulic.
All material is carefully examined, counted and packed by experienced employees. Claims for corrections must be made within 10 days of receipt of goods to the Customer Care center in Easton, PA (1-800-PICK VIC). We prove our count by weight. Claims for shortages are subject to that test. Our responsibility ceases when goods are delivered to carrier in good condition and its receipt obtained. Carriers are responsible for goods lost, damaged or delayed in transit. For your own protection, have transportation company's agent verify damages, shortages or delays and note them on freight bill over his signature.
WEIGHTS: All weights are approximate shipping weights and subject to change without notice.Victaulic maintains a continual policy of product improvement and, therefore, reserves the right to change product specifications,
designs, and standard equipment without notice and without incurring obligation.Warranty, Victaulic U.S., Central and South America Sales and Service Centers
WarrantyWe warrant all products to be free from defects in materials and workmanship under normal conditions of use and service. Our obligation under this warranty is limited to repairing or replacing at our option at our factory any product which shall within one year after delivery to original buyer be returned with transportation charges prepaid, and which our examination shall show to our satisfaction to have been defective.
THIS WARRANTY IS MADE EXPRESSLY IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. THE BUYER'S SOLE AND EXCLUSIVE REMEDY SHALL BE FOR THE REPAIR OR REPLACEMENT OF DEFECTIVE PRODUCTS AS PROVIDED HEREIN. THE BUYER AGREES THAT NO OTHER REMEDY (INCLUDING, BUT NOT LIMITED TO, INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR LOST PROFITS, LOST SALES, INJURY TO PERSON OR PROPERTY OR ANY OTHER INCIDENTAL OR CONSEQUENTIAL LOSS) SHALL BE AVAILABLE TO HIM.
Victaulic neither assumes nor authorizes any person to assume for it any other liability in connection with the sale of such products.
This warranty shall not apply to any product which has been subject to misuse, negligence or accident, which has been repaired or altered in any manner outside of Victaulic's factory or which has been used in a manner contrary to Victaulic's instructions or recommendations. Victaulic shall not be responsible for design errors due to inaccurate or incomplete infor-mation supplied by Buyer or its representatives.
Items purchased by Victaulic and resold will have the original equipment manufacturer's warranty extended to Victaulic customers.EFFECTIVE AUGUST 4, 2008
Fire ProtectionPrice List
2013-FPEFFECTIVE MAY 13, 2013
VICTAULIC
WORLD HEADQUARTERS
P.O. Box 31Easton, PA 18044-0031 USA
4901 Kesslersville RoadEaston, PA 18040 USA
1 800 PICK VIC1 800 742 58421 610 559 33001 610 250 8817 (fax)[email protected]
www.victaulic.com
UNITED STATES
P.O. Box 31Easton, PA 18044-0031
1 610 559 33001 610 250 8817 (fax)[email protected]
CENTRAL AND SOUTH AMERICA
P.O. Box 31Easton, PA 18044-0031 USA
4901 Kesslersville RoadEaston, PA 18040 USA
1 610 559 33001 610 559 3608 (fax)[email protected]
4901 Kesslersville RoadEaston, PA 18040 USA
UPDATED 5/2013 PL2013-FP 0560 REV XVICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY. © 2013 VICTAULIC COMPANY. ALL RIGHTS RESERVED.
www.victaulic.comThe Victaulic website is an information resource that can help you with your piping projects. Among the many resources available at the site:
• Fully searchable product and project databases • Free product submittals • Free product literature • Piping software demos and modules • Information on new product innovations • Support services, and more...
2013 FPFire Protection Price List