BIO66493

NB255

18.50

0.00

1,110.00

0.00

60

2

BIO 30 OZ. 500+ INTUMESCENT FIRESTOP CARTRIDGE FOR PLASTIC

NEWBORN PROFESSIONAL HIGH THRUST CAULKER 1/4 GALLON

PRODUCT / DESCRIPTION

EA

EA

U/M

LOCATIONDATEPAGE

019887NEW GENERATION CONSTRUCTIONP O BOX 57336LINCOLN, NE 68505

07

12/09/101 OF 1

Quotation

QUANTITY

QUOTE #

NEW GENERATION CONSTRUCTIONP O BOX 57336LINCOLN, NE 68505

BILL TO SHIP TO

QUOTE DATE EXPIRE DATE

WRITTEN BY

CUSTOMER P/O NUMBER

CONTACT

PAYMENT TERMS

SHIP VIAAMOS, CLINT J.

EXTENSION

HOTEL OMAHA 1 % 10 DAYS NET 30

PRICE

243 /SALES REP

0.00 0.00 77.70 0.00

HANDLING MISC CHARGE TAX FREIGHT QUOTE TOTALMERCHANDISE TOTAL

07187615

12/09/10 01/08/11

JUSTIN

1,110.00 1,187.70

10:17:042611 KIMCO DR LINCOLN, NE 68521Phone:402-476-6673 Fax:402-476-0049

Activation of Intumescence:

Expansion Begins 375˚ FExpansion Greatest 575˚ to

1100˚ F

Color Red

Cure Time 3 to 4 weeks(at 77˚ F)

Density 10.4 +/- 0.3lbs./gal.

Elastomeric Yes

Freeze-Thaw Excellent

Skin Over Time 30 min.(at 77˚ F)

pH Value 6.5 to 7

Volume Coverage:

for 10.3 oz. tube 18 cu. in.for 20.2 oz. 35.3 cu. in.for 5 gallon 1155 cu. in.

VOC Negligible

ASTM E 84, UL 723 Tunnel Test

Flame Spread 5Smoke Index 10

STC 54*

*Tested in a UL 411 wall assembly/section to ASTM E90.

3. ApplicationsBiostop® 500+ can be used in interiorapplications as a general purposefire rated sealant and smoke seal forconstruction joints on both verticaland horizontal surfaces. Also, forapplications around penetrationsthrough fire rated walls and floors.Biostop® 500+ is an excellent fire

PRODUCT DATA SHEETBIOSTOP® 500+ Firestopping Sealant Classified Through-Penetration Firestop System Numbers CAJ-1204, CAJ-1262, CAJ-1264, CAJ-1330, CAJ-1328, CAJ-2127, CAJ-1321, CAJ-2128, CAJ-2129,CAJ-2130, CAJ-2131, CAJ-2156,CAJ-2179, CAJ-2183, CAJ-2246, CAJ-2248, CAJ-3103, CAJ-3104, CAJ-5006, CAJ-5016, CAJ-5081, CAJ-5082, CAJ-5083, CAJ-5086, CAJ5135, CAJ-5137, CAJ-8051, CAJ6026, CAJ6009, CBJ-3003, CBJ-3004, CBJ-3005, CBJ-3006, WL-1103, WL-1100, WL-1103, WL-1109, WL-1115, WL-1119, WL-1105, WL-1107, WL-1117, WL-1121, WL-1160, WL-1116, WL-1178, WL-1180, WL-1182, WL2202, WL-2210, WL-1200, WL-2133, WL-2136, WL-2193, WL-2191, WL-2239, WL-2105, WL-3093, WL-3156, WL-3095, WL-5062, WL-5058, WL-5060, WL-5076, WL-5085, WL-5093,WL-5128, WL-7036, WL7037, WL-7037, WL-2105, WL-5062, WL-5058, WJ-1060, WJ-1080, WJ-1062, WJ-2040, WJ-2074, WJ-2064, WJ-2066, WJ-3027, WJ-5021, WJ-5017, WJ-5019, WJ-5030, WJ-5034, WJ-5040, WJ-5060, WJ-7015, WJ-7017, WJ-2026, WJ-1037, WJ-1039, WJ-1044, WJ-1046, WJ-3057, WJ-3059, FC-1031, FC-1033, FC-1056, FC-1064, FC-1066, FC-2059, FC-2060, FC-2061, FC-2062, FC-2068, FC-2070, FC-2079, FC2131, FC-2133, FC-2149, FC-2151, FC-2191, FC-2193, FC-3052, FC-8016, FC-8016, FC-8016, FC-2078, FC-5021, FC-5023, TRC/PV60-06, and TRC/PV 120-15 & HWD-0180,HDW-0015 & HWD0057

1. Product DescriptionBiostop® 500+ is a one component,general purpose fire rated sealant andsmoke seal for construction joints andaround penetrations through fire ratedwalls and floors. Biostop® 500+ is awater based, extremely intumescent,non-sag caulking grade sealant that iseasy to apply as well as to retrofit. Itcures to an elastomeric seal that issuitable where dynamic movement isexpected. In the event of a fire,Biostop® 500+ will prevent the spreadof flames, smoke, hot gases and waterthrough joint openings and through-penetrations. No dilution or mixing isrequired for use. No special skills arenecessary for installation. Biostop®500+ is applied with a conventionalcaulking gun, bulk loading gun or canbe troweled from the pail. For largeapplications, it can be pumped directlyfrom the pail. Biostop® 500+ is ratedfor 1, 2, 3 and 4 hours and has beentested in accordance with the ASTME814, (UL 1479), UL 2079 and ULC-S115-95 test standards. BIOSTOP®500+ is protected in a wet stage as wellas in a dry stage against mold growthwith a combination of biocides.

Use Biostop® 500+ for variousapplications:

Through Wall/Floor PenetrationsTop of the Wall Construction JointsDeflection Track Wall SystemsWall to Floor JointsFloor to Wall JointsConcrete on Steel Deck to Wall1,2 , 3 and 4 Hour Gypsum WallsConcrete and Concrete Block Walls(CMU)Up to 2" PVC (open)Up to 3" PVC/PBS (closed)Crosslinked Polyethylene (PEX) tubingSteel, Copper,Cast Iron and EMT PipeFiberglass Insulated PipeAB/PVC Insulation PipeTelephone/Power CablesAcoustical sealant

For a complete list of productapplications or for additional technicalinformation, call RECTORSEAL forthe latest updated information.

Biostop® 500+ Features

• Water Based

• Excellent Freeze-Thaw

• Flexible Set

• Highly Intumescent

• Paintable

• VOC Compliant

• Safe and Easy to Use

• Minimum 2 Year Shelf Life

2. Material PropertiesAsbestos Fillers NoneSolvents NoneHazardous Ingredients None

Application CaulkingGun orTrowel

June 2007

FIRESHIELD

2.03

™

CM

INTERTEK

Warnock Hersey USC

BIOSTOP® 500+

rated acoustical sealant and can beused in areas under constant vibrationor movement. Use Biostop® 500+ to5prevent the spread of fire and smokethrough joints in fire rated gypsumwallboard partitions, concrete blockor concrete walls and/or concrete orcorrugated steel deck floor/ceilingassemblies.

4. Installation DataInstall Biostop® 500+ using standardcaulking techniques or trowel frompails. Biostop® 500+ may also bepumped from the pails. Whendamming materials are needed, useonly materials approved for thespecific application.

TYPICAL TOP OF WALLINSTALLATION

Step 1)Tightly pack the flute openings andrelief gap with fiberglass insulation.Recess insulation a minimum 1/4"from the wall surface.

Step 2)Gun, trowel or pump the sealant asrequired to a minimum 1/4" depth.Properly tool sealant surface flushwith the wall.

5. Testing DataBiostop® 500+ has been tested inaccordance with UL 2079 and listedat Warnock Hersey International, Inc.For specific test criteria, refer to theUL's Fire Resistance Directory orWarnock Hersey International ListingDirectory or call RECTORSEAL .

Biostop® 500+ was tested at positivepressure with a minimum 0.01 inches(2.5 Pa) water and in accordancewith ASTM E814, (UL 1479) UL2079 and CAN4-S115-M85.

Complies to Required EnvironmentalExposure Testing of AcceleratedAging and High Humidity as per UL1479 Fire Test of Through-PenetrationFirestops.

FGG/BM/CZ™ System Compatible*indicates that this product has beentested, and is monitored on an ongoingbasis, to assure its chemical compatibil-ity with FlowGuard Gold®,BlazeMaster® and Corzan® pipe andfittings.FlowGuard Gold®, BlazeMaster® and Corzan® arelicensed trdemarks of Lubrizol Corporation.

6. Storage & HandlingBiostop® 500+ should be storedbetween 35˚ and 120˚F. to obtain aminimum 2 year shelf life. NOTE: Donot dilute, no mixing is required. Bestif protected from freezing. If freezingoccurs, thaw completely before using.Keep products stored under protectivecover in original containers.

7. AvailabilityBiostop® 500+ is available in 10.3 oz.& 30 oz. caulking tubes, 20.2 oz.sausage packs and in 2 & 5 gallonpails.

8. LimitationsBiostop® 500+ is not designed to be used inareas under continuous immersion or in areaswhich would be continuously wet. Biostop®500+ should not be used against hot uninsulatedsurfaces above 300˚ F.

9. CautionsFOR CHEMICAL EMERGENCY, SPILL,LEAK, FIRE, EXPOSURE OR ACCIDENT,CALL CHEMTREC-DAY OR NIGHT 1-800-424-9300.

PRECAUTIONS: Do not take internally. Maybe harmful if swallowed. May cause eye andskin irritation if prolonged or repeated contactoccurs. Wash after handling. FIRST AID: Forany overexposure, get immediate medicalattention after first aid is given. Eyes- Flush 15minutes with clean water. Skin-Wash withsoap and water. Inhalation-Remove to freshair. Ingestion-Only if conscious, give largeamounts of water and INDUCE VOMITING.FIRE AND SPILLS: Use water fog, CO2, foam,or dry chemicals. Wipe up spills to preventfooting hazard. Clean up with scrapers andwater. STORAGE AND HANDLING: Storeaway from heat sources. Keep container closed.Do not reuse empty container. KEEP OUT OFREACH OF CHILDREN.

For additional information, refer to Material Safety Data Sheet.

For additional technical service,call: 1-800-231-3345fax: 1-800-452-2824

RECTORSEAL2601 SPENWICK DRIVEHOUSTON, TEXAS 77055, USAwww.biofireshield.com

E-07

TOP OF WALL

2.03a

10. LIMITED WARRANTY RectorSeal makes the Limited Express Warranty that when the instructions for storage and handling of our products are followed we warrant our products to be free from defects. THIS LIMITED EXPRESS WARRANTYIS EXPRESSLY IN LIEU OF ANY OTHER EXPRESS OR IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ANDOF ANY OTHER OBLIGATION ON THE PART OF RECTORSEAL . The sole remedy for breach of the Limited Express Warranty shall be the refund of the purchase price. All other liability is negated and disclaimed,and RectorSeal shall not be liable for incidental or consequential damages.

Suggestions and recommendations covering the use of our products are based on our past experience and laboratory findings. However, as we have no control as to the methods and conditions of application, we only assumeresponsibility for the uniformity of our products within manufacturing tolerances.

UL Listed System: HWD0015

Tested as Per UL 2079 at 25% Compression or extension for 500 cycles

1/4" (6 mm) Biostop™ 500+Steel/Wood Stud

2 Layers of 5/8" (16 mm)Type ’X’

Corrugated Steel DeckFiberglass Insulation

Gypsum Wallboard

(19mm) (76 mm)

MATERIAL SAFETY DATA SHEET MSDS 0200 ============================================================================= Section 1 -- PRODUCT AND COMPANY IDENTIFICATION ----------------------------------------------------------------------------- HMIS CODES PRODUCT NAME Health 1 Biostop 500+ Flammability 0 Reactivity 0 PRODUCT CODES PPI B 66492, 66493, 66499, 66500 CHEMICAL FAMILY Organic/Inorganic USE Firestopping Sealant MANUFACTURER'S NAME EMERGENCY TELEPHONE NO. The RectorSeal Corporation Chemtrec 24 Hours 2601 Spenwick Drive (800) 424-9300 Houston, Texas 77055 USA VALIDATION DATE TECHNICAL SERVICE TELEPHONE NO. April 6, 2010 (800) 231-3345 REVISION DATE April 6, 2010 ============================================================================= Section 2 -- COMPOSITION/INFORMATION ON INGREDIENTS ----------------------------------------------------------------------------- % by WT CAS No. INGREDIENT UNITS None as defined by OSHA Hazard Communication Standard 29 CFR 1910.1200. ============================================================================= Section 3 -- HAZARDS IDENTIFICATION ---------------------------------------------------------------------------- SUMMARY OF ACUTE HAZARDS May cause skin irritation. ROUTE OF EXPOSURE, SIGNS AND SYMPTOMS INHALATION Not a respiratory irritant. EYE CONTACT Contact may cause eye irritation. SKIN CONTACT Contact may cause skin irritation. INGESTION Possible irritation to mucous membranes of the mouth, throat, and stomach.

SUMMARY OF CHRONIC HAZARDS None known. MEDICAL CONDITIONS AGGRAVATED BY EXPOSURE Persons with pre-existing skin conditions or chemical allergies may be more susceptible to contact effects of the cured elastomer. ============================================================================= Section 4 -- FIRST AID MEASURES ----------------------------------------------------------------------------- If INHALED: Not a respiratory irritant. If on SKIN: Wash with soap and water. If irritation occurs, seek medical attention. If in EYES: Immediately flush with large amounts of water. If irritation occurs, seek medical attention. If SWALLOWED: If swallowed, call a physician immediately. Only induce vomiting at the instruction of a physician. Never give anything by mouth to an unconscious person. ============================================================================= Section 5 -- FIRE FIGHTING MEASURES ----------------------------------------------------------------------------- FLASH POINT LEL UEL None N/D N/D EXTINGUSING MEDIA Foam, dry chemical, carbon dioxide or water fog. SPECIAL FIRE FIGHTING PROCEDURES: Wear self-contained breathing apparatus (SCBA) and other protective clothing. Hazardous decomposition products possible (see Section 10). UNUSUAL FIRE AND EXPLOSION HAZARDS: Heat may build up and rupture closed containers. ============================================================================= Section 6 -- ACCIDENTAL RELEASE MEASURES ----------------------------------------------------------------------------- STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED: Wipe up spills to prevent footing hazard. Avoid flushing into sewers, drains, waterways and soil. Wear protective clothing during clean up. ============================================================================= Section 7 -- HANDLING AND STORAGE ----------------------------------------------------------------------------- PRECAUTIONS TO BE TAKEN IN HANDLING AND STORING: Keep container closed and upright when not in use. To prevent freezing and possible rupture of

container, do not store below 40 F. OTHER PRECAUTIONS: Avoid prolonged or repeated contact with skin or clothing. Empty containers may contain residues and vapors; treat as if full and observe all product precautions. Do not reuse empty containers. KEEP OUT OF REACH OF CHILDREN. ============================================================================= Section 8 -- EXPOSURE CONTROLS/PERSONAL PROTECTION ----------------------------------------------------------------------------- RESPIRATORY PROTECTION (SPECIFY TYPE): None required. VENTILATION - LOCAL EXHAUST: Acceptable SPECIAL: N/A MECHANICAL (GENERAL): Preferable OTHER: N/A PROTECTIVE GLOVES: Wear rubber gloves. EYE PROTECTION: Safety glasses (ANSI Z-87.1 or equivalent) OTHER PROTECTIVE CLOTHING OR EQUIPMENT: Coveralls recommended. WORK/HYGIENIC PRACTICES: Where use can result in skin contact, wash exposed areas thoroughly before eating, drinking, smoking, or leaving work area. Launder contaminated clothing before reuse. ============================================================================= Section 9 -- PHYSICAL AND CHEMICAL PROPERTIES ----------------------------------------------------------------------------- BOILING POINT: 212 F (100 C) @ 760mm Hg SPECIFIC GRAVITY (H20 = 1): 1.25 VAPOR PRESSURE (mm Hg): 17 @ 68 F (20 C) MELTING POINT: N/A VAPOR DENSITY (AIR = 1): N/A EVAPORATION RATE (ETHYL ACETATE = 1): >1 APPEARANCE/ODOR: Red Paste/Mild Odor SOLUBILITY IN WATER: Soluble VOLATILE ORGANIC COMPOUNDS(VOC)Content (Theoretical Percentage By Weight):