Finishing Pumps GRACCO
-
Upload
renatosartre -
Category
Documents
-
view
238 -
download
19
description
Transcript of Finishing Pumps GRACCO
P R O V E N Q U A L I T Y . L E A D I N G T E C H N O L O G Y .
Low, Medium and High Pressure Pumps
FIN
ISH
ING
FINISHING PUMPS BUYER’S GUIDE
ABOUT GRACO
P R O V E N Q U A L I T Y . L E A D I N G T E C H N O L O G Y .
Founded in 1926, Graco is a world leader in fluid handling systems and components. Graco productsmove, measure, control, dispense and apply a wide range of fluids and viscous materials used in vehiclelubrication, commercial and industrial settings.
The company’s success is based on its unwavering commitment to technical excellence, world-class manufacturing and unparalleled customer service. Working closely with qualified distributors, Gracooffers systems, products and technology which set the quality standard in a wide range of fluid handlingsolutions. Graco provides equipment for spray finishing, protective coating, paint circulation, lubrication, and dispensing sealants and adhesives, along with power application equipment for thecontractor industry. Graco’s ongoing investment in fluid management and control will continue to provideinnovative solutions to a diverse global market.
©2005 Graco Inc. Form No. 337045 Rev. A 8/05 Printed in U.S.A. All other brand names or marks are used for identification purposes and are trademarks of their respective owners.
Sales/Distribution/Service North AmericaIndustrial Customer Service 800-328-0211Industrial product Information/Demonstration1-877-84GRACO (1-877-844-7226)FAX 612-378-3597
Graco Inc. is registered to I.S. EN ISO 9001
GRACO HEADQUARTERS
All written and visual data contained in this document are based on the latest product information available at the time of publication. Graco reserves the right to make changes at any time without notice.
AMERICAS
MINNESOTAWorldwide HeadquartersGraco Inc.88-11th Avenue N.E.Minneapolis, MN 55413
MAILING ADDRESSP.O. Box 1441Minneapolis, MN 55440-1441Tel 612 623-6000Fax 612 623-6777
MICHIGANAutomotive Headquartersand Sales Office47800 Halyard DrivePlymouth, MI 48170Tel 734 416-3400Fax 734 416-3441
EUROPE
BELGIUMEuropean HeadquartersGraco N.V.Industrieterrein - Oude BundersSlakweidestraat 313630 Maasmechelen, BelgiumTel 32 89 770 700Fax 32 89 770 777
ASIA PACIFIC
JAPANGraco K.K.1-27-12 HayabuchiTsuzuki-kuYokohama City, Japan 2240025Tel 81 45 593 7300Fax 81 45 593 7301
CHINAGraco Hong Kong Ltd.Representative Office Room 118 1st FloorNo. 2 Xin Yuan BuildingNo. 509 Cao Bao RoadShanghai, P.R.China 200233Tel 86 21 649 50088Fax 86 21 649 50077
KOREAGraco Korea Inc.3rd Fl., Doorim Bldg.164-21 Poi-Dong, Kangnam-KuSeoul, Korea 135-260Tel 82 2 575-8901Fax 82 2 571-9422
GRACO INC.P.O. Box 1441Minneapolis, MN 55440-1441
Call today for product information or to request a demonstration.
1.877.84GRACO (1-877-844-7226) or visit us at www.graco.com.
PUM
PS
The Graco WarrantyGraco warrants all equipment referenced in this document which is manufactured by Graco and bearing its name to be free from defects in materialand workmanship on the date of sale by an authorized Graco distributor to the original purchaser for use. With the exception of any special, extended, or limited warranty published by Graco, Graco will, for a period of twelve months from the date of sale, repair or replace any part of theequipment determined by Graco to be defective. This warranty applies only when the equipment is installed, operated and maintained in accordancewith Graco’s written recommendations.
This warranty does not cover, and Graco shall not be liable for general wear and tear, or any malfunction, damage or wear caused by faulty installation, misapplication, abrasion, corrosion, inadequate or improper maintenance, negligence, accident, tampering, or substitution of non-Gracocomponent parts. Nor shall Graco be liable for malfunction, damage or wear caused by the incompatibility of Graco equipment with structures, accessories, equipment or materials not supplied by Graco, or the improper design, manufacture, installation, operation or maintenance or structures,accessories, equipment or materials not supplied by Graco.
This warranty is conditioned upon the prepaid return of the equipment claimed to be defective to an authorized Graco distributor for verification ofthe claimed defect. If the claimed defect is verified, Graco will repair or replace free of charge any defective parts. The equipment will be returned tothe original purchaser transportation prepaid. If inspection of the equipment does not disclose any defect in material or workmanship, repairs will bemade at a reasonable charge, which charges may include the costs of parts, labor, and transportation.
THIS WARRANTY IS EXCLUSIVE, AND IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TOWARRANTY OF MERCHANTABILITY OR WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE.
Graco’s sole obligation and buyer’s sole remedy for any breach of warranty shall be as set forth above. The buyer agrees that no other remedy(including, but not limited to, incidental or consequential damages for lost profits, lost sales, injury to person or property, or any other incidental orconsequential loss) shall be available. Any action for breach of warranty must be brought within two (2) years of the date of sale.
GRACO MAKES NO WARRANTY, AND DISCLAIMS ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE INCONNECTION WITH ACCESSORIES, EQUIPMENT, MATERIALS OR COMPONENTS SOLD BUT NOT MANUFACTURED BY GRACO. These items sold, butnot manufactured by Graco (such as electric motors, switches, hose, etc.), are subject to the warranty, if any, of their manufacturer. Graco will providepurchaser with reasonable assistance in making any claim for breach of these warranties.
In no event will Graco be liable for indirect, incidental, special or consequential damages resulting from Graco supplying equipment hereunder, or thefurnishing, performance, or use of any products or other goods sold hereto, whether due to a breach of contract, breach of warranty, the negligenceof Graco, or otherwise.
FOR GRACO CANADA CUSTOMERS
The parties acknowledge that they have required that the present document, as well as all documents, notices and legal proceedings entered into,given or instituted pursuant hereto or relating directly or indirectly hereto, be drawn up in English. Les parties reconnaissent avoir convenu que larédaction du présente document sera en Anglais, ainsi que tous documents, avis et procédures judiciaires exécutés, donnés ou intentés à la suite deou en rapport, directement ou indirectement, avec les procedures concernées.
Equipment Misuse General Misuse: Any misuse of Graco equipment or accessories, such as over-pressurizing, modifying parts, using incompatiblechemicals and fluids, or using worn or damaged parts, can cause them to rupture. Misuse of equipment can result in fluid injection, splashing in the eyes or on the skin, or other serious bodily injury, or fire, explosion or property damage. NEVER alter or modify any part of Graco equipment; doing so could cause the product to malfunction. CHECK all equipment regularly and repairor replace worn or damaged parts immediately. Always wear protective eye wear, gloves, clothing and respirator as recommended by fluid and solvent manufacturers.
System Pressure: Be sure that all equipment and accessories used are rated to withstand the applicable MAXIMUM WORKING PRESSURE. DO NOT exceed the maximum working pressure of any component or accessory used in a system.
Fluid and Solvent Compatibility: All chemicals used in a Graco sprayer must be compatible with wetted parts. Consult your chemical supplier to ensure compatibility. Do not use 1:1:1-trichloroethane, methylene chloride, other halogenated hydrocarbon sol-vents or fluids containing such solvents in this equipment, which contains aluminum and/or zinc parts. Such use could result in aserious chemical reaction, with the possibility of explosion, which could cause death, serious bodily injury and/or substantial property damage.
1
1
PUMP OVERVI EW ❚ F IN I SH ING EQU IPMENT
PUMP OVERVIEW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-8
LOW PRESSURE PUMPS0–500 PSI (0-34.5 BAR, 0–3.5 MPA)
Quick Reference Pump Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9TRITON™ 308 Double Diaphragm . . . . . . . . . . . . . . . . . . . . 10-12TRITON 1030HP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-15Glutton® 4:1 Dual Piston . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16-18Monark® 1.5, 2:1, 5:1 2-Ball Piston . . . . . . . . . . . . . . . . . . . . 19-23 President® 3:1, 4:1 2-Ball Piston . . . . . . . . . . . . . . . . . . . . . 24-29Bulldog® 5:1 2-Ball Piston . . . . . . . . . . . . . . . . . . . . . . . . . . . 30-33President 1.5:1, 2:1, 3:1;
Senator® 2.5:1, 3.5:1; Bulldog 4:1 4-Ball Piston . . . . . . . 34-44Viscount® I+ 225, 300, 450 Hydraulic 4-Ball Piston . . . . . . 45-50Bulldog 3:1; King® 3:1, 4:1, 6:1 4-Ball Piston . . . . . . . . . . . 51-57Viscount II 300, 400, 600 Hydraulic 4-Ball Piston . . . . . . . 58-63Imperial™ Electric Centrifugal . . . . . . . . . . . . . . . . . . . . . . . . 64-67
MEDIUM PRESSURE PUMPS500–3000 PSI (35-207 BAR, 3.5-20.7 MPA)
Quick Reference Pump Index . . . . . . . . . . . . . . . . . . . . . . . . . . . 69Falcon™ 10:1, 20:1 2-Ball Piston . . . . . . . . . . . . . . . . . . . . . 70-73Monark 15:1, 23:1 2-Ball Piston . . . . . . . . . . . . . . . . . . . . . . 74-78President 10:1, 15:1, 30:1 2-Ball Piston . . . . . . . . . . . . . . . 79-83Merkur™ 15:1, 20:1, 30:1, 30:1 HF 2-Ball Piston . . . . . . . . . 84-88Orion™ 15:1, 28:1 Bellows Pump . . . . . . . . . . . . . . . . . . . . . 89-92Senator 13:1, 17:1, 25:1 2-Ball Piston . . . . . . . . . . . . . . . . . 93-98Bulldog 10:1, 14:1, 21:1, 24:1, 28:1 2-Ball Piston . . . . . . 99-107Viscount I 1000, 3000 Hydraulic 2-Ball Piston . . . . . . . . 108-111Viscount II 1000, 2000, 2600 Hydraulic 2-Ball Piston . . . 112-117Glutton 12:1, 25:1 Dual Piston . . . . . . . . . . . . . . . . . . . . 118-121
HIGH PRESSURE PUMPS3000 PSI AND ABOVE (207 BAR, 20.7 MPA)
Quick Reference Pump Index . . . . . . . . . . . . . . . . . . . . . . . . . . 123Merkur 40:1 2-Ball Piston . . . . . . . . . . . . . . . . . . . . . . . . . 124-127President 46:1 2-Ball Piston . . . . . . . . . . . . . . . . . . . . . . . 128-131Viscount II 4500, 5000 Hydraulic 2-Ball Piston . . . . . . . 132-136
Table of Contents Pumps
1
3
1
PUMP OVERVI EW ❚ F IN I SH ING EQU IPMENT
Pumping Technology Definitions
Continuous Duty A pump operating 24 hours a day, seven days a week, 52 weeks a year.
Cycle RateThe number of times the pump completes a pump cycle in a given period of time.
Flow RateThe volume of material that can be pumped in a givenperiod of time.
Maximum Fluid Outlet PressureThe maximum outlet fluid pressure a pump can achieve atstall, no flow.
PressureThe amount of force exerted evenly on a given surfacearea, typically reported in pounds per square inch (psi),MegaPascals (MPa), or bar (bar).
PumpThe term referring to equipment that supplies fluid pressure and flow for fluid handling needs.
Pump CycleA complete upstroke and downstroke operation of thelower displacement pump.
Pump RatioThe relationship between the air or hydraulic motor pistoneffective area and the lower displacement pump’s pistoneffective area.
Pump StrokeThe upstroke or downstroke operation of a pump.
Pump Volume per CycleThe volume of material pumped in a complete upstrokeand downstroke pump operation.
Sound Pressure LevelThe number of decibels (dBA) produced by the pump at a given pump cycle rate.
ShearOne layer of fluid slipping relative to an adjacent layer of fluid. The more a fluid slips in a pump, the higher theshear rate.
ViscosityThe resistance of a fluid to flowing. The more a fluid resistsflowing, the higher its viscosity.
HOW TO READ THE PERFORMANCE CHARTSStep 1: Locate the required fluid flow along bottom axis of chart.Step 2: Follow vertical line to the intersection with the solid curve (A, B
or C – based on your air inlet pressure).Step 3: Follow to left axis to read fluid outlet pressure.Step 4: From Step 2, follow vertical line up or down to the
intersection with the dotted line (A, B or C – based on your airinlet pressure) then follow to right axis to read air consump-tion.
Example*To obtain 5 gpm (19 lpm) fluid flow at approximately 175 psi (12 bar, 1.2 MPa) fluid outlet pressure you will need 70 psi (4.8 bar, 0.5 MPa) of air pressure. The air consumption will be approxi-mately 13 scfm.
AIR PRESSURES LEGEND
= @ 100 psi (7 bar, 0.7 MPa) Air Consumption
= @ 70 psi (4.8 bar, 0.48 MPa) Fluid Flow
= @ 40 psi (2.8 bar, 0.28 MPa)
ABC
FLUID FLOW(Pump tested in No. 10 weight oil)
FLU
ID O
UTL
ET P
RES
SUR
Eps
i (ba
r, M
Pa)
AIR
CO
NSU
MPT
ION
scfm
(m3 /
min
)
gpm 2.5 5.0 7.5 10.0(lpm) 9.5 19 29 38
40(1.12)
35(0.98)
30(0.84)
25(0.7)
20(0.56)
15(0.42)
10(0.28)
5(0.14)
400(28, 2.8)
350(24.5, 2.45)
300(21, 2.1)
250(17, 1.7)
200(14, 1.4)
150(10.5, 1.05)
100(7, 0.7)
50(3.5, 0.35)
0
CYCLES PER MINUTE
15 30 45 60
B
A
C
A
B
C
4
1
F IN I SH ING EQU IPMENT ❚ PUMP OVERVI EW
400
300
200
100
0
0.75 (2.8) 1.5 (5.7) 3 (11.4) 6 (22.7) 9 (34.2) 12 (45.3) 15 (56.7) 18 (68.0)
Monark 2:1Monark 1.5:1
Triton 308
Triton 1030 HP 3:1 225 Viscount I+
President1.5:1
President 2:1
Glutton 4:1
President 3:1 (2-ball) President 3:1 (4-ball)
Viscount I+ 450
Viscount I+ 300
Monark 5:1
President 4:1
Bulldog 5:1
Senator 3.5:1
(34, 3.4)
(28, 2.8)
(21, 2.1)
(14, 1.4)
(7.0, 0.7)
5000
4500
4000
3500
3000
2500
2000
1500
1000
0.75 (2.8) 1.5 (5.7) 3 (11.4) 6 (22.7) 9 (34.2) 12 (45.3) 15 (56.7) 18 (68.0)
Viscount II 5000
Merkur30:1
Viscount II 4500
Viscount I 1000
Viscount II 2600Glutton 25:1, Monark 15:1
Merkur 20:1
President 46:1
Merkur40:1
Bulldog 41:1
Bulldog 21:1
Bulldog 10:1 Viscount II 1000
Viscount II 2000
Senator 13:1
Bulldog 24:1, Senator 25:1
President 15:1Senator 17:1 President 10:1
Bulldog 28:1
Glutton 12:1
(345, 34.5)
(310, 31.0)
(276, 27.6)
(241, 24.1)
(241, 24.1)
(173, 17.3)
(138, 13.8)
(103, 10.3)
(69, 6.9)
Viscount I 3000, President 30:1, Monark 23:1
Merkur 30:1
Falcon 20:1
Orion 15:1Merkur 15:1Falcon 10:1
Orion 28:1
Pump Selection GuideChoose the best pump solution in 4 easy steps.
MA
XIM
UM
FLU
ID O
UTL
ET P
RES
SUR
E ps
i (b
ar, M
Pa)
MA
XIM
UM
FLU
ID O
UTL
ET P
RES
SUR
E ps
i (b
ar, M
Pa)
FLUID FLOW@ 60 CYCLES PER MINUTE gpm (lpm)
FLUID FLOW@ 60 CYCLES PER MINUTE gpm (lpm)
HIG
H P
RE
SS
UR
E P
UM
PS
ME
DIU
M P
RE
SS
UR
E P
UM
PS
LO
W P
RE
SS
UR
E P
UM
PS
5
1
PUMP OVERVI EW ❚ F IN I SH ING EQU IPMENT
1Select Pressure and Flow Ratea. Locate your desired maximum pump fluid outlet pressure
along the vertical axis.
b. Locate your necessary pump flow rate capability alongthe horizontal axis. Flow rates are reported at maximumduty cycle, 60 cycles per minute. Select the appropriatepump based on normal continuous duty cycle rates,which are typically 20-30 cycles per minute.
21 (79.4) 24 (90.7) 27 (102) 30 (113) 45 (170) 60 (227)
Bulldog 4:1
Senator 2.5:1
King 6:1Viscount II 600
Bulldog 3:1
Viscount II 400
Viscount II 300
King 3:1
King 4:1
Imperial
6
1
F IN I SH ING EQU IPMENT ❚ PUMP OVERVI EW
2Select Pump Materials of ConstructionChoose the pump's wetted parts based on their resistanceto the corrosive, chemical and abrasive characteristics of thefluid to be handled.
Refer to individual pump product sections to determine available materials of construction.
PTFE TUFF-STACK™
CARBONSTEEL
NITRALLOY
STAINLESSSTEEL
PTFE &LEATHER
RUBBER LEATHER
UHMWPE UHMWPE& LEATHER
XTRE
MES
EAL™
& L
EATH
ER
CHEM
ICAL
RES
ISTA
NCE
CORR
OSI
ON
RES
ISTA
NCE
ABRASION RESISTANCE
ABRASION RESISTANCE
HIGH HIGH
HIGH
HIGH
LOWLOW
Note:UHMWPE (Ultra High Molecular Weight Polyethylene)Tuff-Stack™ is a proprietary PTFE blend.XtremeSeal™ is a proprietary PTFE-filled UHMWPE blend.Severe Duty (exclusive Graco metal treatment) Chrome-plated Stainless Steel.Make sure other wetted parts for each pump model are also compatible with the fluid to be pumped.
Pump Selection Guide
SEVEREDUTY
®
7
1
PUMP OVERVI EW ❚ F IN I SH ING EQU IPMENT
3Confirm Appropriate Pump TechnologyChoose the pump technology based on the application and thechemical, rheological, and abrasive characteristics of the fluid tobe handled.
2-BALLPISTON
DIAPHRAGM PUMP
DUAL PISTON
HIGH PRESSUREDIAPHRAGM
PUMP
4-BALLPISTON
CENTRIFUGALPRES
SURE
FLOWHIGH
HIGH
LOW
Pump Selection Guide
Diaphragm Pump TRITON 308 • Economical pump solution • Low viscosity fluids• High flow capability
High Pressure • High pressure for a diaphragm pump • Shear-sensitive fluidsDiaphragm Pump TRITON 1030 HP • Low shear output • Boothside, special color paints
• Quick color changeDual Piston Glutton • No fluid seal air exposure • CatalystsBellows Pump • Durable, Severe Duty rod, cylinder • Moisture-sensitive coatings
and seals • UV-cure coatings• Abrasive fluids
Bellows Orion • No fluid seal air exposure • CatalystsPiston • No throat packing for low serviceability • Moisture-sensitive coatings
• UV-cure coatings2-Ball Piston Falcon • Wide performance range capability • Solventborne fluidsPump Merkur • Low to high pressure capability • Waterborne fluids
Monark • Uniform and easily controlled delivery • High solids coatingsPresident • Durable, Severe Duty rod, cylinder • LacquersSenator and seals • EnamelsBulldog • UrethanesViscount 1Viscount II
4-Ball Piston Mid-Range High-Flo • Low cycle rate operation • Waterbornes and solventbornesPump Large Volume High-Flo Plus • Low shear output for paint circulating systemsCentrifugal Imperial • Uniform and smooth fluid delivery • Automotive paintsPump • Low maintenance for paint circulating systems
PUMP GRACO UNIQUE TYPICALTECHNOLOGY BRAND BENEFIT FLUIDS
8
1
F IN I SH ING EQU IPMENT ❚ PUMP OVERVI EW
Pump Selection Guide
Hydraulic Supply Pumps• An effective alternative to compressed air systems
• Three times more energy efficient than comparable pneumatic pumps
• Quiet operation
Viscount I+ Viscount I Viscount II
225 1000 300
300 3000 400
450 600
1000
2000
2600
4500
5000
Viscount number values refer to maximum pump fluid output pressure in psi.
Electric Supply Pumps• An effective alternative to compressed air systems
• Three times more energy efficient than comparable pneumatic pumps
• Quiet operation
• Explosion-proof motors offered
Imperial
6-15 pump stages
4Select Power SourceChoose the pump power source based on installation and energy efficiency requirements.
Pneumatic Supply Pumps• Most readily available power source for in-plant applications
• Simple installation
DoubleDiaphragm Pumps Glutton Orion Falcon Merkur Monark President Senator Bulldog KingTRITON 308 4:1 15:1 10:1 15:1 1.5:1 1.5:1 2.5:1 3:1 3:1
TRITON 1030HP 30:1 24:1
46:1 28:1
33:1
41:1
9
1
LOW PRESSURE PUMPS ❚ F IN I SH ING EQU IPMENT
Quick Reference Pump IndexLow Pressure Pumps, 0 – 500 psi
Max FluidDiaphragm Pump Fluid Flow @ 60 cpm Outlet PressurePump Ratio gpm (lpm) psi (bar, MPa)TRITON™ 308 1:1 2.4 (9.6) 115 (8, 0.8)TRITON 1030 HP 3:1 6.0 (22.8) 260 (18, 1.8)
Max FluidAir Pump Air Motor Fluid Flow @ 60 cpm Outlet PressureMotor Ratio Diameter gpm (lpm) psi (bar, MPa)Glutton® 4:1 7.25 in (18.4 cm) 5.6 (21.2) 400 (28, 2.8)Monark® 1.5:1 3 in (7.6 cm) 6.8 (25.7) 180 (12, 1.2)Monark 2:1 4.23 in (10.7 cm) 5.4 (20.5) 200 (14, 1.4)Monark 5:1 4.23 in (10.7 cm) 2.5 (9.4) 600 (42, 4.2)President® 3:1 5.99 in (15.2 cm) 10 (37.8) 360 (25, 2.5)President 4:1 5.99 in (15.2 cm) 8 (30.2) 400 (28, 2.8)Bulldog® 5:1 7 in (17.8 cm) 15 (56.7) 500 (35, 3.5)President (4-ball) 1.5:1 4 in (10.2 cm) 19.6 (74.8) 270 (19, 1.9)President (4-ball) 2:1 4 in (10.2 cm) 14.2 (53.9) 360 (25, 2.5)President (4-ball) 3:1 4 in (10.2 cm) 9.7 (36.9) 500 (34, 3.4)Senator® (4-ball) 2.5:1 5.5 in (13.9 cm) 23.2 (87.8) 250 (17, 1.7)Senator (4-ball) 3.5:1 5.5 in (13.9 cm) 16.9 (64) 350 (24, 2.4)Bulldog® (4-ball) 3:1 7 in (17.8 cm) 31 (119) 300 (21, 2.1)Bulldog (4-ball) 4:1 7 in (17.8 cm) 23.2 (87.8) 400 (28, 2.8)King® (4-ball) 3:1 10 in (25.4 cm) 63 (239) 270 (19, 1.9)King (4-ball) 4:1 10 in (25.4 cm) 47 (179) 360 (25, 2.5)King (4-ball) 6:1 10 in (25.4 cm) 31 (119) 540 (37, 3.7)
Max FluidHydraulic Pump Fluid Flow @ 60 cpm Outlet PressureMotor Ratio gpm (lpm) psi (bar, MPa)Viscount® I+ (4-ball) 0.15:1 19.6 (74) 225 (16, 1.6)Viscount I+ (4-ball) 0.20:1 14.2 (53.9) 300 (21, 2.1)Viscount I+ (4-ball) 0.30:1 9.7 (35.3) 450 (31, 3.1)Viscount II (4-ball) 0.20:1 63 (239) 300 (21, 2.1)Viscount II (4-ball) 0.27:1 47 (179) 400 (28, 2.8)Viscount II (4-ball) 0.40:1 31 (119) 600 (41, 4.1)
Max FluidElectric Flow Rate @ 60 cpm Outlet PressureMotor gpm (lpm) psi (bar, MPa)Imperial™ 50 (189)* 250 (17, 1.7)
*Flow rate is dependent upon specific gravity of fluid and number of pump stages.
10
1
F IN I SH ING EQU IPMENT ❚ LOW PRESSURE PUMPS
Features and Benefits• Double diaphragm pump designed specifically
for finishing applications
• Low pulsation output provides smooth pumpchangeover
• Low shear design for minimal degradation ofshear sensitive materials
• Rugged aluminum and stainless steel construction handles a wide variety of fluids
Typical Applications• Air spray/HVLP spray finishing
• Applying primers, basecoats and topcoats on metal parts
• Spraying stains, sealers, lacquers and topcoats on wood parts
Typical Fluids Handled• Stains, sealers, lacquers
• Waterborne/solventborne paints
• Shear-sensitive coatings
• UV-cure materials
TRITON 308Aluminum
233500
Rugged Stainless Steel or
Aluminum pump
Smooth, consistent
delivery
Low pulsation
output
TRITON™ 308Air-Operated Double Diaphragm Pumps
11
1
LOW PRESSURE PUMPS ❚ F IN I SH ING EQU IPMENT
Technical SpecificationsPump ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1:1
Maximum fluid outlet pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115 psi (8 bar, 0.8 MPa)
Maximum air input pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115 psi (8 bar, 0.8 MPa)
Fluid flow @ 60 cpm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.4 gpm (9.6 lpm)
Volume per cycle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 oz (160 cc)
Air consumption at 100 psi air @ 20 cpm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.5 scfm (0.04 m3/min)
Sound pressure level at 100 psi air @ 20 cpm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75 dBA
Air motor inlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/4 npt(f) or 1/4 BSPP
Pump fluid inlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3/4 npt(f) or M26 x 1.5 (BSPP)
Pump fluid outlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3/8 npt(f) or 3/8 BSPP
WeightAluminum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 lb. (4.1 kg)Stainless Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 lb. (6.4 kg)
Instruction manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 309303Note: npt is National Pipe Taper thread
BSPP is British Standard Pipe Parallel thread
TRITON 308Air-Operated Double Diaphragm Pumps
DimensionsPerformance Chart
4.53 in(115 mm)
Air Inlet1/4 npt(f) or 1/4 BSPP
Fluid Inlet3/4 npt(f) or M26 x 1.5 (BSPP)
Fluid Outlet3/8 npt(f) or 3/8 BSPP
4.1 in(104 mm)
two 0.35 in (9 mm) diameterholes for mounting pump
Bottom View
Side View
4.88 in(124 mm)
8.58 in(218 mm)
FLU
ID O
UTL
ET P
RES
SUR
E ps
i (ba
r, M
Pa)
AIR
CO
NSU
MPT
ION
scf
m (
m3 /m
in) 120
(8.3, 0.8)
140 (9.7, 1.0)
100 (7.0, 0.7)
80 (5.5, 0.6)
60 (4.1, 0.4)
40(2.8, 0.3)
20(1.4, 0.1)
6(0.17)
7 (2.0)
5(0.14)
4(0.11)
3(0.08)
2(0.06)
1(0.03)
0 0
A
B
C
gpm 0 1 2 3 4 5 6 7 8(lpm) (3.8) (7.6) (11.4) (15.1) (18.9) (22.7) (26.5) (30.3)
24 47 71 94 118 141 165 188
CYCLES PER MINUTE
FLUID FLOW(Pump tested in No. 10 Wt. Oil)
AIR PRESSURES LEGEND
A = @ 115 psi (8.0 bar, 0.8 MPa) Air Consumption
B = @ 90 psi (6.2 bar, 0.6 MPa) Fluid Flow
C = @ 60 psi (4.1 bar, 0.4 MPa)
D = @ 30 psi (2.1 bar, 0.2 MPa)
C
D
B
A
D
12
1
F IN I SH ING EQU IPMENT ❚ LOW PRESSURE PUMPS
Ordering InformationPump Part Number 233500 233501 233776 233777Thread Design npt npt BSPP BSPP
Construction Aluminum SST Aluminum SST
Seats construction SST SST SST SST
Ball guides construction Acetal Acetal Acetal Acetal
Balls construction Acetal Acetal Acetal Acetal
Diaphragms construction PTFE PTFE PTFE PTFE
Replacement Parts Ordering Information
PTFE diaphragm repair kit 245065 245065 245065 245065
Air valve repair kit 245066 245066 245066 245066
Acetal ball and SST seat kit 245067 245067 245067 245067
Diaphragm shaft kit 245068 245068 245068 245068
TRITON 308Air-Operated Double Diaphragm Pumps
Accessories197426 TRITON 308 Wall Bracket
Used to mount a TRITON pump to a wall.
245082 Suction Hose, AluminumUsed to siphon material out of a 5 gal (18.9 l) pail. Includes4 ft (1.2 m) hose, aluminum siphon tube, and inlet strainer.Hose outlet fitting: 3/8 npsm(f).
245083 Suction Hose, StainlessUsed to siphon material out of a 5 gal (18.9 l) pail. Includes4 ft (1.2 m) hose, stainless siphon tube and inlet strainer.Hose outlet fitting: 3/8 JIC(f) (9/16-18 unf).
245084 Suction Hose Kit, Aluminum, 55 Gallon DrumUsed to siphon material out of a 55 gal (200 l) drum.Includes 6 ft (1.8 m) hose, aluminum siphon tube, acetalbung adapter and inlet strainer. Hose outlet fitting: 3/8 npsm(f).
245085 Suction Hose Kit, Stainless, 55 Gallon DrumUsed to siphon material out of a 55 gal (200 l) drum.Includes 6 ft (1.8 m) hose, stainless siphon tube, acetal bung adapter and inlet strainer. Hose outlet fitting: 3/8 JIC(f) (9/16-18 unf).
13
1
LOW PRESSURE PUMPS ❚ F IN I SH ING EQU IPMENT
High pressure outputdiaphragm pump
TRITON 1030HP233750 & 233751
Low shear pump for shear-sensitivematerials
Quick color changecapability
Features and Benefits• Diaphragm seal eliminates conventional
throat packings for lower maintenance costs
• Low shear design for minimal degradation of sensitive materials
• Low pulsation output pump for consistentdelivery and spray pattern
• Easy start at low air pressures, for constantand stable operation
• Minimal “dead” areas in pump provide
excellent flushability for solvent and material
savings
• Low noise operation
Typical Applications• Paint circulation systems
• Wood coatings circulation
• Boothside/satellite paint circulation systems
Typical Fluids Handled• Waterborne and solventborne paints
• Wood coatings
• Moisture-sensitive materials, isocyanates
• Shear-sensitive waterborne coatings
• UV-cure materials
TRITON™ 1030HPAir-Operated High Pressure Double Diaphragm Pumps
14
1
F IN I SH ING EQU IPMENT ❚ LOW PRESSURE PUMPS
Performance Charts
Operating Notes:
1. Recommended continuous duty performance range is up to 20 cycles per minute. Flow ratesexceeding 20 cycles per minute are achievable, but recommended for intermittent duty only.
2. Pump diaphragm life expectancy may decrease when operating above 20 cycles per minutecontinuously for extended periods of time.
3. Avoid pressure-feeding pumps or operating pumps “dry” for extended periods of time.
4. During pump start-ups, gradually increase air inlet pressure and pump cycle rate.
AIR PRESSURES LEGEND
= @ 88 psi (6 bar, 0.6 MPa) Air Consumption
= @ 60 psi (4 bar, 0.4 MPa) Fluid Flow
= @ 30 psi (2 bar, 0.2 MPa)
ABC
0 5 11 16 21 27 33 40 300
(20.7, 2.0)
250(17.2, 1.7)
200(13.8, 1.4)
150(10.3, 1.0)
100(6.9, 0.6)
50(3.4, 0.3)
30(.85)
25(.71)
20(.57)
15(.42)
10(.28)
5(.14)
0 0.5 1 1.5 2 2.5 3 3.5 (1.9) (3.8) (5.7) (7.6) (9.4) (11.3) (13.2)
CYCLES PER MINUTE
FL
UID
OU
TL
ET
PR
ES
SU
RE
psi
(ba
r, M
Pa)
AIR
CO
NS
UM
PT
ION
scf
m (
m3 /
min
.)
FLUID FLOW(Pump tested in No. 10 weight oil)
gpm(lpm)
A
B
C
A
B
C
TRITON 1030HPAir-Operated High Pressure Double Diaphragm Pump
Technical SpecificationsTRITON 1030HP
Pump ratio
Maximum fluid outlet pressure 260 psi (17.9 bar, 1.8 MPa)
Maximum air input pressure 88 psi (6.1 bar, 0.6 MPa)
Fluid flow @ 20 cpm 2.0 gpm (7.6 lpm)
Volume per cycle 11 oz (350 cc)
Maximum recommendedcontinuous cycle rate 20 cpm
Air consumption @ 88 psi air @ 20 cpm 10 scfm (0.28 m3/min)
Sound pressure level @100 psi air @ 20 cpm 67 dBA
Air motor inlet 1/2 npt(f) or 1/2 BSPP(f)
Pump fluid inlet 1 npt(f) or 1 BSPP(f)
Pump fluid outlet 1 npt(f) or 1 BSPP(f)
Weight 64 lb. (29 kg)
Instruction manual 309476
360 mm (14.2 in.)
318 mm(12.5 in.)
146 mm(5.7 in.)
160 mm(6.3 in.)
213 mm (8.4 in.)
M8 MountingHoles
Air Inlet
Fluid Inlet
Fluid Outlet
Dimensions
15
1
LOW PRESSURE PUMPS ❚ F IN I SH ING EQU IPMENT
TRITON 1030HPAir-Operated High Pressure Double Diaphragm Pump
Ordering Information
1. Select 1030HP, based on flow requirements of the circulating system. Refer to performance chart.
2. Select npt or BSPP thread design based on circulating system pumping requirements.
3. Order pump part number.
TRITON 1030HP TRITON 1030HPPump Part Number (Bare Pump Only) 233751 233750Construction SST SST
Thread design npt BSPP
Seat Construction SST SST
Ball guides construction Acetal Acetal
Ball construction Acetal Acetal
Diaphragm construction PTFE PTFE
Repair Kits Ordering Information
PTFE diaphragm repair kit 243152 243152
Air valve repair kit 243153 243153
Acetal balls and stainless seats kit (qty: 4 each) 243154 243154
Pneumatic cylinder seal repair kit 243155 243155
Fluid manifold seal kit 243156 243156
Accessories 245874 Floor Stand, 4-legged
Includes stand frame and hardware for mounting the TRITON 1030HP pump on the floor. Does not includepump.
224040 Pump Runaway ValveUse to prevent pump from running dry and running athigh cycle rates. Maximum working pressure: 120 psi (0.8 MPa, 8.4 bar). Inlet and outlet: 3/4 npt(f).
245875 Wall BracketIncludes wall bracket and hardware for mounting the TRITON 1030HP pump on wall. Does not include pump.
208920 Siphon Kit, AluminumUse to siphon fluid from a 5 gal (18.9 l) pail. Includesnylon suction hose 170706, 1in ID, 4 ft (1.2 m) long, 3/4 npt(f) swivel.
238909 Grounding Wire and Clamp10 gauge, 25 ft (7.6 m) wire
16
1
F IN I SH ING EQU IPMENT ❚ LOW PRESSURE PUMPS
Features and Benefits• Bellows seal design provides low maintenance with no
seals exposed to the atmosphere
• Bellows seal design eliminates conventional throat seals, providing high reliability for moisture-sensitive materials
• Reversible outlet manifold simplifies plumbing installations
• Vertical ball checks design ensures uniform ball wear andlong life
Typical Applications• Air spray and HVLP supply pump
• Circulating system
• Catalyst feed for proportioning systems
Typical Fluids Handled• Catalyzed coatings
• High solids coatings
• Abrasive materials
• Solventborne and waterborne fluids
• Moisture sensitive materials
• UV-cure coatings
Bellows seal protects piston rodand piston seal from fluid andabrasive particles
Patented piston seals providelong life and low mainte-nance
Glutton 4:1 220666
Pump stand included for easy mounting
Glutton™ 4:1Heavy-Duty, Dual Piston Pumps
17
1
LOW PRESSURE PUMPS ❚ F IN I SH ING EQU IPMENT
Glutton4:1Heavy-Duty, Dual Piston Pumps
Technical SpecificationsPump ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4:1
Maximum fluid outlet pressure . . . . . 400 psi (28 bar, 2.8 MPa)
Maximum air input pressure . . . . . . . . 100 psi (7 bar, 0.7 MPa)
Fluid flow at 60 cpm . . . . . . . . . . . . . . . . . . 5.6 gpm (21.2 lpm)
Volume per cycle . . . . . . . . . . . . . . . . . . . . . . . . . . 12 oz (355 cc)
Air consumption at 100 psi air @ 20 cpm . . . . . . . . . . . 15 scfm (0.42 m3/min)
Sound pressure levelat 100 psi air @20 cpm . . . . . . . . . . . . . . . . . . . . . . . . . 88 dBa
Air motor inlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/2 npt(f)
Pump fluid inlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1/4 npt(f)
Pump fluid outlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 npt(f)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80 lb. (36 kg)
Instruction manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 307843
Performance Chart
Width: 19.6 in(498 mm)
Air Inlet1/2 npt(f)
Depth: 15.8 in(401 mm)
Fluid Inlet1-1/4 npt(f)
Fluid Outlet1 npt(f)
Dimensions
Height: 15.1 in(384 mm)
AIR PRESSURES LEGEND
= @ 100 psi (7 bar, 0.7 MPa) Air Consumption
= @ 70 psi (4.8 bar, 0.5 MPa) Fluid Flow
= @ 40 psi (2.8 bar, 0.3 MPa)
ABC
FLUID FLOW(Pump tested in No. 10 weight oil)
FLU
ID O
UTL
ET P
RES
SUR
E p
si (
bar,
MPa
)
AIR
CO
NSU
MPT
ION
sc
fm (
m3 /
min
)
gpm 0 1 2 3 4 5 6(lpm) (3.8) (7.6) (11.4) (15.1) (18.9) (22.5)
50(1.4)
40(1.1)
30(0.8)
20(0.6)
10(0.3)
0
500(35, 3.5)
400(28, 2.8)
300(21, 2.1)
200(14, 1.4)
100(7, 0.7)
0
CYCLES PER MINUTE
10 20 30 40 50 60
B
A
C
A
B
C
18
1
F IN I SH ING EQU IPMENT ❚ LOW PRESSURE PUMPS
Accessories206221 Pump Wall Mount Bracket
For mounting Glutton pump on wall.
102969 Loctite® High Strength SealantUse to secure piston shafts to the piston stud.
237949 Stainless Steel Drum Cover KitFor 55 gal (200 l) drum applications to siphon directlyfrom drum. Includes SST drum cover, agitator gasket,access hole plug and fasteners.
204385 Elevator with Fixed MountingUse with Drum Cover Kit (237949) and air control kit(237579) to raise and lower pump when changingdrums.
237579 Air Control KitUse with elevator 204385 to raise and lower drum cover.
223319 Return Tube KitUse to return circulated fluid back to a 55 gal (200 l) drum through a drum cover. Includes SST return tube, SST bushing and SST elbow.
208259 55 Gallon (200 Liter) Suction KitSiphon hose and riser tube to siphon fluid out of 55 gal (200 l) drum. Suction hose 3/4 in ID x 6 ft (1.8 m) elbow, bung adapter, riser tube, 3/4 npt(f) outlet fitting.
Glutton4:1Heavy-Duty, Dual Piston Pumps
Ordering Information1. Select pump construction (carbon steel or stainless steel) based on the corrosive and chemical
characteristics of the fluid to be handled.
2. Select piston seal construction (UHMWPE or nylon) based on the chemical characteristics of the fluid to be handled.
3. Order pump part number.Glutton 4:1 Glutton 4:1 Glutton 4:1 Glutton 4:1
Pump Part Number 220663 220666 237008 237011Construction CS SST CS SST
Piston seal construction UHMWPE UHMWPE Nylon Nylon
Replacement Parts Ordering InformationAir valve and pilot valve repair kit 220656 220656 220656 220656
Standard piston seals and bellows kit 220949 220949 237014 237014
Construction UHMWPE UHMWPE Nylon Nylon
Optional piston seals and bellows kit 237014 237014 220949 220949
Construction Nylon Nylon UHMWPE UHMWPE
Optional piston seal kit 220658 220658 220658 220658
Construction Urethane Urethane Urethane Urethane
Carbide ball and seat kit (qty: 2 each) 221134 221134 221134 221134
Standard fluid piston 189432 189432 189432 189432
Construction SST SST SST SST
Optional fluid piston 686499 686499 686499 686499
Construction Ceramic Ceramic Ceramic Ceramic
19
1
LOW PRESSURE PUMPS ❚ F IN I SH ING EQU IPMENT
Features and Benefits• Drum and stubby length models available for
mounting and application flexibility
• Positive displacement, 2-ball piston design, provides uniform and easily controlled delivery
• Stainless steel or carbon steel models availableto handle various fluids
Typical Applications• Fluid transfer and supply
• Paint circulating system
• Chemical cleaning supply pump
Typical Fluids Handled• Solventborne and waterborne fluids
• Resins
• Stains/varnishes
• Lacquers
• Texture coatings
• Cleaning fluids
• Adhesives and sealants Monark 1.5:1Stubby Pump
218763
Reliable Monark
air motor
Fluid return stanchion for
circulation back to the
pump
Outlet stanchion tube
Stubby length pump
for wall mount
applications
Monark 5:1 Stubby Pump
224343
Monark® 1.5:1, 2:1 and 5:1Pneumatic 2-Ball Piston Pumps
20
1
F IN I SH ING EQU IPMENT ❚ LOW PRESSURE PUMPS
Technical SpecificationsMonark Monark Monark MonarkStubby Stubby Drum
Pump ratio 1.5:1 2:1 5:1 5:1
Maximum fluid outlet pressure 180 psi 200 psi 600 psi 900 psi(12 bar, 1.2 MPa ) (14 bar, 1.4 MPa) (42 bar, 4.2 MPa) (62 bar, 6.2 MPa)
Maximum air input pressure 120 psi 100 psi 120 psi 180 psi(8 bar, 0.8 MPa) (7 bar, 0.7 MPa) (8.3 bar, 0.8 MPa) (12.4 bar, 1.2 MPa)
Fluid flow @ 60 cpm 6.8 gpm (25.7 lpm) 5.4 gpm (20.5 lpm) 2.5 gpm (9.4 lpm) 2.5 gpm (9.4 lpm)
Volume per cycle 15 oz. (429 cc) 12 oz. (343 cc) 5 oz. (157 cc) SS: 5.3 oz. (157 cc)CS: 4.6 oz. (135 cc)
Air consumption @100 psi air @ 20 cpm 3.5 scfm (0.1 m3/min) 3.5 scfm (0.1 m3/min) 7 scfm (0.2 m3/min) 7 scfm (0.2 m3/min)
Sound pressure level @100 psi air @ 20 cpm 75 dBA 75 dBA 75 dBA 75 dBA
Air motor inlet 3/8 npsm(f) 3/8 npsm(f) 3/8 npt(f) 3/8 npt(f)
Pump fluid inlet 1-1/2 npt(f) 1-1/2 npt(f) 3/4 npt(f) N/A
Pump fluid outlet 1 npt(f) 1 npt(f) 1/2 npt(f) 3/4 npt(f)
Weight 36 lb. (16 kg) 40 lb. (18 kg) 20 lb. (9 kg) 30 lb. (13.6 kg)
Instruction manual 307653 307985 308116 308118 (Stainless steel)308117 (Hydra-Clean) 307044 (Carbon steel)
Monark 1.5:1, 2:1, and 5:1Pneumatic 2-Ball Piston Pumps
Performance Chart for Monark 1.5:1 Pump
FLUID FLOW(Pump tested in No. 10 weight oil)
FLU
ID O
UTL
ET P
RES
SUR
E p
si (
bar,
MPa
)
AIR
CO
NSU
MPT
ION
sc
fm (
m3 /
min
)
gpm 2 4 6 8(lpm) (7.6) (15.2) (22.8) (30.4)
12(0.3)
10(0.3)
8(0.2)
6(0.2)
4(0.1)
2(0.06)
150(10, 1.0)
125(8.0, 0.8)
100(7.0, 0.7)
75(5.2, 0.5)
50(3.4, 0.3)
25(1.7, 0.2)
0
CYCLES PER MINUTE
18 35 53 70
B
A
C
A
B
C
AIR PRESSURES LEGEND
= @ 100 psi (7 bar, 0.7 MPa) Air Consumption
= @ 70 psi (4.8 bar, 0.5 MPa) Fluid Flow
= @ 40 psi (2.7 bar, 0.3 MPa)
ABC
21
1
LOW PRESSURE PUMPS ❚ F IN I SH ING EQU IPMENT
Performance Chart for Monark 5:1 Drum and Stubby Pumps
AIR PRESSURES LEGEND
= @ 120 psi (8.3 bar, 0.8 MPa) Air Consumption
= @ 100 psi (7 bar, 0.7 MPa) Fluid Flow
= @ 70 psi (4.8 bar, 0.5 MPa)
= @ 40 psi (2.7 bar, 0.8 MPa)
ABC
FLUID FLOW(Pump tested in No. 10 weight oil)
FLU
ID O
UTL
ET P
RES
SUR
E p
si (
bar,
MPa
)
AIR
CO
NSU
MPT
ION
sc
fm (
m3 /
min
)
gpm 1 2 3 4 5(lpm) (3.8) (7.6) (11.3) (15.1) (18.9)
20(0.6)
16(0.5)
12(0.3)
8(0.2)
4(0.1)
600(42, 4.2)
500(35, 3.5)
400(28, 2.8)
300(21, 2.1)
200(14, 1.4)
100(7.0, 0.7)
0
CYCLES PER MINUTE
24 48 72 96 120
B
A
C
D
D
A
B
C
D
Monark 1.5:1, 2:1 and 5:1Pneumatic 2-Ball Piston Pumps
Performance Chart for Monark 2:1 Drum and Stubby Pumps
AIR PRESSURES LEGEND
= @ 100 psi (7 bar, 0.7 MPa) Air Consumption
= @ 70 psi (4.8 bar, 0.5 MPa) Fluid Flow
= @ 40 psi (2.7 bar, 0.3 MPa)
ABC
FLUID FLOW(Pump tested in No. 10 weight oil)
FLU
ID O
UTL
ET P
RES
SUR
E p
si (
bar,
MPa
)
AIR
CO
NSU
MPT
ION
sc
fm (
m3 /m
in)
gpm 1.5 3.0 4.5 6.0(lpm) (5.7) (11.3) (17.0) (22.7)
12(0.34)
10(0.29)
8(0.23)
6(0.17)
4(0.11)
2(0.06)
240(17, 1.7)
200(14, 1.4)
160(11, 1.1)
120(8, 0.8)
80(5.5, 0.5)
40(2.7, 0.3)
0
CYCLES PER MINUTE
16 32 48 64
B
A
C
A
B
C
22
1
F IN I SH ING EQU IPMENT ❚ LOW PRESSURE PUMPS
Monark 1.5:1, 2:1 and 5:1Pneumatic 2-Ball Piston Pumps
15.31 in(389 mm)
32.5 in(826 mm)
Dimensions for Monark 2:1 Drum Pump
25.25 in(641 mm)
11.5 in(292 mm)
13.75 in(349 mm)
Dimensions for Monark 5:1 Stubby PumpDimensions for Monark 5:1 Drum Pump
Monark1-1⁄2:1 15.75 in
(400 mm)
Monark2:1
15.31 in(389 mm)
Dimensions for Monark 1.5:1 and 2:1 Stubby Pumps
47.81 in(1215 mm)
Fluid Return1/2 npt(m)
or 3/4 npt(f)
Fluid Outlet3/4 npt(m)or 1 npt(f)
Fluid Inlet1-1/2 npt(f)
Monark1-1⁄2:1
35.75 in (908 mm)
Monark2:1
35.31 in(897 mm)
Monark1-1⁄2:1 & 2:1
20 in(508 mm)
54.28 in(1379 mm)
11.6 in(295 mm)
42.68 in(1084 mm)
Air Inlet3/8 npsm(f)
Air Inlet3/8 npt(f)
Fluid Outlet3/4 npt(f)
Air Inlet3/8 npt(f)
Fluid Outlet1/2 npt(f)
Fluid Inlet3/4 npt(f)
Fluid Return3/4 npt(f)
Fluid Outlet1 npt(f)
Air Inlet3/8 npsm(f)
Fluid Inlet1-1/2 npt(f)
23
1
LOW PRESSURE PUMPS ❚ F IN I SH ING EQU IPMENT
Accessories207365 Wall Bracket
For mounting 5:1 Monark pump to wall.
206220 Wall Bracket For mounting 1.5:1 and 2:1 Monark pump to wall.
194248 Accessory Packing ToolEases insertion of position assembly into cylinder (model218763, 223186 and 223185).
168085 Accessory Assembly ToolUsed to install piston assembly into cylinder (models 218956).
241953 Monark Muffler Retrofit KitUpgrades previous Monark air motor design with foamattached to air motor plates. Reduces sound level ofMonark air motor.
207579 Padded PliersFor servicing Monark air motor trip rod.
171818 Adjustment ToolA 0.145 in (3.7 mm) gauge used to ensure proper clear-ance between the poppets and the piston on the Monarkair motor.
236054 Suction Kit (Monark 1.5:1 and 2:1 only)Use to siphon material out of 55 gal (200 l) closed-enddrum. Includes siphon tube, bung adapter, 6 ft (1.8 m)nitrile hose, 1-1/2 npt(m) outlet fitting.
207484 Siphon Kit, Aluminum (Monark 5:1 only)Use to siphon fluid from a 5 gal (18.9 l) pail. Includesnylon suction hose 214960, 3/4 in ID, 3.5 ft (1.1 m)long, 3/4 in npt(f) swivel outlet fitting.
208259 Siphon Kit, Carbon Steel (Monark 5:1 only)Use to siphon fluid from a 55 gal (200 l) drum. Includesnylon suction hose 214961, 3/4 in ID, 6 ft (1.8 m), 3/4 in npt(f) swivel outlet fitting, bung adapter.
208920 Siphon Kit, Aluminum (Monark 5:1 only)Use to siphon fluid from a 5 gal (18.9 l) pail. Includesnylon suction hose 170706, 1 in ID, 4 ft (1.2 m) long,3/4 in npt(f) swivel outlet fitting, inlet strainer.
Monark 1.5:1, 2:1 and 5:1Pneumatic 2-Ball Piston Pumps
Ordering InformationPump part number includes motor and lower displacement pump
Monark 1.5:1 Monark 2:1 Monark 5:1 Monark 5:1 Monark 5:1 Monark 5:1Pump part number 218763 223186/223185 224343 224345 218956 224350Configuration Stubby Stubby/Drum Stubby Stubby Drum DrumAir motor 210004 206955 205997 205997 205997 205997
Lower displacement pump 218746 223177 224341 224344 220465 224349
Construction SST CS SST SST CS SST
Seal construction 3 UHMWPE/2 Leather 3 UHMWPE/2 Leather 2 UHMWPE/2 PTFE UHMWPE/Neoprene 4 PTFE 2 UHMWPE/2 PTFE
Replacement Parts Ordering InformationAir motor repair kit 206728 206728 206728 206728 206728 206728
Standard seal repair kit 220927 223320 224401 224402 208520 224403
Construction 3 UHMWPE/2 Leather 3 UHMWPE/2 Leather 2 UHMWPE/2 PTFE UHMWPE/Neoprene 4 PTFE 2 UHMWPE/2 PTFE
Optional seal repair kit 237197 237194 224889 224404 N/A 224889
Construction 3 Leather/2 PTFE 3 Leather/2 PTFE 4 PTFE UHMWPE/PTFE 4 PTFE
Optional seal repair kit 237198 237193 N/A N/A N/A N/A
Construction 4 Leather/1 PTFE 4 Leather/1 PTFE
Optional seal repair kit 237200 223321 N/A N/A N/A N/A
Construction 5 PTFE 5 PTFE
Optional seal repair kit 218757 N/A N/A N/A N/A N/A
Construction UHMWPE U-Cup
Optional throat seal packings N/A N/A 243622 243624 243622 243622
Construction Tuff-Stack™ Tuff-Stack Tuff-Stack Tuff-Stack
Optional piston seal packings N/A N/A 243623 243623/243625 243623 243623
Construction Tuff-Stack Tuff-Stack Tuff-Stack Tuff-Stack
Displacement rod 180954 185650 186997 186997 169504 186997
Construction SST CS SST SST SST SST
Cylinder 177721 185649 186994 186994 186986 186986
Construction SST CS SST SST SST SST
PTFE is a registered trmark of Du Pont.Note: Tuff-Stack part numbers 243622, 243623, 243624, and 243625 sold as 12-count convenience pack.
Tuff-Stack is a proprietary PTFE blend.
24
1
F IN I SH ING EQU IPMENT ❚ LOW PRESSURE PUMPS
Features and Benefits• Drum and stubby length models available for
mounting and application flexibility
• Positive displacement, 2-ball piston design provides uniform and easily controlled delivery
• Divorced air motor eliminates fluid and fume contamination, reducing maintenance
• Stainless steel or carbon steel models available to handle various fluids
Typical Applications• Paint circulation
• Fluid transfer and supply
• Chemical cleaning supply pump
Typical Fluids Handled• Solventborne and waterborne fluids
• Varnishes, enamels and lacquers
• Cleaning fluids
• Adhesives and sealants
President 4:1Drum Pump
223183
Reliable President
air motor
Fluid supply
stanchion through
air motor base for
drum applications
Fluid return stanchion
for circulation back
to the pump
President® 3:1, 4:1Pneumatic 2-Ball Piston Pumps
25
1
LOW PRESSURE PUMPS ❚ F IN I SH ING EQU IPMENT
Technical SpecificationsPresident President
Pump ratio 3:1 4:1
Maximum fluid outlet pressure 360 psi 400 psi (25 bar, 2.5 MPa) (28 bar, 2.8 MPa)
Maximum air input pressure 120 psi 100 psi(8.3 bar, 0.8 MPa) (7 bar, 0.7 MPa)
Fluid flow @ 60 cpm 10 gpm (37.8 lpm) 8 gpm (30.2 lpm)
Volume per cycle 0.16 gal (0.63 l) 0.13 gal (0.50 l)
Air consumption @100 psi air @ 20 cpm 10 scfm (0.28 m3/min) 8 scfm (0.23 m3/min)
Sound pressure level @100 psi air @ 20 cpm 81 dBA 81 dBA
Air motor inlet 3/8 npsm(f) 3/8 npt(f) (Drum)3/8 npt(f) (Model 218795) 1/2 npt(f) (Stubby)
Pump fluid inlet 1-1/2 npt(f) 1-1/2 npt(f)
Pump fluid outlet 3/4 npt(m) (Stubby) 1 npt(f)1 npt(f) (Drum)
Weight 47 lb. (21 kg) 47 lb. (21 kg)
Instruction manual 307674 307986
President 3:1, 4:1Pneumatic 2-Ball Piston Pumps
26
1
F IN I SH ING EQU IPMENT ❚ LOW PRESSURE PUMPS
President 3:1, 4:1Pneumatic 2-Ball Piston Pumps
AIR PRESSURES LEGEND
= @ 100 psi (7 bar, 0.7 MPa) Air Consumption
= @ 70 psi (4.8 bar, 0.5 MPa) Fluid Flow
= @ 40 psi (2.7 bar, 0.3 MPa)
ABC
FLUID FLOW(Pump tested in No. 10 weight oil)
FLU
ID O
UTL
ET P
RES
SUR
E p
si (
bar,
MPa
)
AIR
CO
NSU
MPT
ION
sc
fm (
m3 /
min
)
gpm 2.5 5.0 7.5 10.0(lpm) (9.5) (18.9) (28.4) (37.8)
40(1.1)
35(0.9)
30(0.8)
25(0.7)
20(0.6)
15(0.4)
10(0.3)
5(0.1)
400(28, 2.8)
350(24, 2.4)
300(21, 2.1)
250(17, 1.7)
200(14, 1.4)
150(10, 1.0)
100(7, 0.7)
50(3.5, 0.4)
0
CYCLES PER MINUTE
15 30 45 60
B
A
C
A
B
C
Performance Chart for President 3:1 Stubby and Drum Pumps
Performance Chart for President 4:1 Stubby and Drum Pumps
AIR PRESSURES LEGEND
= @ 100 psi (7 bar, 0.7 MPa) Air Consumption
= @ 70 psi (4.8 bar, 0.5 MPa) Fluid Flow
= @ 40 psi (2.7 bar, 0.3 MPa)
ABC
FLUID FLOW(Pump tested in No. 10 weight oil)
FLU
ID O
UTL
ET P
RES
SUR
E p
si (
bar,
MPa
)
AIR
CO
NSU
MPT
ION
sc
fm (
m3 /
min
)
gpm 2 4 6 8(lpm) (7.6) (15.1) (22.7) (30.2)
40(1.1)
35(0.9)
30(0.8)
25(0.7)
20(0.6)
15(0.4)
10(0.3)
5(0.1)
400(28, 2.8)
350(24, 2.4)
300(21, 2.1)
250(17, 1.7)
200(14, 1.4)
150(10, 1.0)
100(7, 0.7)
50(3.4, 0.3)
0
CYCLES PER MINUTE
15 30 45 60
B
A
C
A
B
C
27
1
LOW PRESSURE PUMPS ❚ F IN I SH ING EQU IPMENT
President 3:1, 4:1Pneumatic 2-Ball Piston Pumps
Drum:49.0 in
(1245 mm)
Stubby:36.5 in
(927 mm)
Drum:32.5 in
(826 mm)
Stubby:20.0 in
(508 mm)
16.5 in(419 mm)
Dimensions for President 4:1 Stubby and Drum Pumps
Stubby:36.38 in
(926 mm)
Drum:48.88 in(1242 in)
Stubby:20 in
(508 mm)
Drum:32.5 in
(826 mm)
16.38 in(416 mm)
Air Inlet3/8 npsm(f)or 3/8 npt(f)
Fluid Outlet3/4 npt(m) stubby
1 npt(f) drum
Fluid Return3/4 npt(m) drum1/2 npt(m) stubby
Fluid Inlet1-1/2 npt(f)
Dimensions for President 3:1 Stubby and Drum Pumps
Air Inlet3/8 npt(f)
or 1/2 npt(f)
Fluid Outlet1 npt(f)
Fluid Return3/4 npt(f)
Fluid Inlet1-1/2 npt(f)
28
1
F IN I SH ING EQU IPMENT ❚ LOW PRESSURE PUMPS
President 3:1, 4:1Pneumatic 2-Ball Piston Pumps
Ordering InformationPump part number includes motor and lower displacement pump
President 3:1 President 3:1 President 3:1 President 3:1 President 3:1Pump part number 237142 237143 218747 237146 237144Configuration Stubby Stubby Stubby Stubby DrumAir motor 205038 205038 210007 205038 205038
Lower displacement pump 237140 237141 218746 237199 237140
Construction CS CS SST SST CS
Seal construction 4 Leather/1 PTFE 3 Leather/2 PTFE 3 UHMWPE/2 Leather 5 PTFE 4 Leather/1 PTFE
Replacement Parts Ordering InformationAir motor repair kit 207385 207385 207385 207385 207385
Standard seal repair kit 237198 237197 220927 237200 237198
Construction 4 Leather/1 PTFE 3 Leather/2 PTFE 3 UHMWPE/2 Leather 5 PTFE 4 Leather/1 PTFE
Optional seal repair kit 220927 220927 237197 220927 220927
Construction 3 UHMWPE/2 Leather 3 UHMWPE/2 Leather 3 Leather/2 PTFE 3 UHMWPE/2 Leather 3 UHMWPE/2 Leather
Optional seal repair kit 237197 237198 237198 237197 237197
Construction 3 Leather/2 PTFE 4 Leather/1 PTFE 4 Leather/1 PTFE 3 Leather/2 PTFE 3 Leather/2 PTFE
Optional seal repair kit 237200 237200 237200 237198 237200
Construction 5 PTFE 5 PTFE 5 PTFE 4 Leather/1 PTFE 5 PTFE
Optional seal repair kit 218757 218757 218757 218757 218757
Construction UHMWPE U-Cup UHMWPE U-Cup UHMWPE U-Cup UHMWPE U-Cup UHMWPE U-Cup
Displacement rod 180954 180954 180954 180954 180954
Construction SST SST SST SST SST
Cylinder 177721 177721 177721 177721 177721
Construction SST SST SST SST SST
Pump part number includes motor and lower displacement pumpPresident 3:1 President 3:1 President 4:1 President 4:1
Pump part number 218795 237145 223184 223183Configuration Drum Drum Stubby DrumAir motor 210007 205038 205038 205038
Lower displacement pump 218746 237199 223177 223177
Construction SST SST CS CS
Seal construction 3 UHMWPE/2 Leather 5 PTFE 3 UHMWPE/2 Leather 3 UHMWPE/2 Leather
Replacement Parts Ordering InformationAir motor repair kit 207385 207385 207385 207385
Standard seal repair kit 220927 237200 223320 223320
Construction 3 UHMWPE/2 Leather 5 PTFE 3 UHMWPE/2 Leather 3 UHMWPE/2 Leather
Optional seal repair kit 237197 220927 237193 237193
Construction 3 Leather/2 PTFE 3 UHMWPE/2 Leather 4 Leather/1 PTFE 4 Leather/1 PTFE
Optional seal repair kit 237198 237197 237194 237194
Construction 4 Leather/1 PTFE 3 Leather/2 PTFE 3 Leather/2 PTFE 3 Leather/2 PTFE
Optional seal repair kit 237200 237198 223321 223321
Construction 5 PTFE 4 Leather/1 PTFE 5 PTFE 5 PTFE
Optional seal repair kit 218757 218757 N/A N/A
Construction UHMWPE U-Cup UHMWPE U-Cup
Displacement rod 180954 180954 185650 185650
Construction SST SST CS CS
Cylinder 177721 177721 185649 185649
Construction SST SST CS CS
29
1
LOW PRESSURE PUMPS ❚ F IN I SH ING EQU IPMENT
President 3:1, 4:1Pneumatic 2-Ball Piston Pumps
Accessories206220 Wall Bracket
For mounting President pump to wall.
220581 Pump Floor StandFor mounting a President pump in a suction-feed system.
194248 Accessory Packing ToolEases insertion of piston assembly into cylinder.
171818 Adjustment ToolA 0.145 in (3.7 mm) gauge used to ensure proper clearance between the poppets and the piston on thePresident air motor.
207579 Padded PliersFor servicing President air motor trip rod.
208920 Siphon Kit, AluminumUse to siphon fluid from a 5 gal (18.9 l) pail. Includesnylon suction hose 170706, 1 in ID, 4 ft (1.2 m) long,3/4 in npt(f) swivel outlet fitting. Requires 1-1/2 in to 3/4 in npt reducer and 3/4 in npt nipple.
207484 Siphon Kit, AluminumUse to siphon fluid from a 5 gal (18.9 l) pail. Includesnylon suction hose 214960, 3/4 in ID, 3.5 ft (1.1 m)long, 3/4 in npt(f) swivel outlet fitting. Requires 1-1/2 into 3/4 in npt reducer and 3/4 in npt nipple.
208259 Siphon Kit, Carbon SteelUse to siphon fluid from a 55 gal (200 l) drum. Includesnylon suction hose 214961, 3/4 in ID, 6 ft (1.8 m) long, 3/4 in npt(f) swivel outlet fitting, bung adapter.Requires 1-1/2 in to 3/4 in npt reducer and 3/4 in npt nipple.
243801 President Remote Exhaust Muffler KitKit allows remote exhaust piping to be installed toPresident air motor exhaust port. Redirects noise andexhaust contaminants to a remote location. Kit includes air motor covers with 3/4 in npt(f) exhaust port and cork gasket.
243421 President Muffler KitKit includes external muffler and plates and gaskets usedin muffler kit 243801. External muffler provides noisereduction to President air motor.
30
1
F IN I SH ING EQU IPMENT ❚ LOW PRESSURE PUMPS
Features and Benefits• Drum and stubby length models available for mounting and
application flexibility
• Positive displacement 2-ball piston design provides uniform and easily controlled delivery
• Stainless steel or carbon steel models available to handle various fluids
Typical Applications• Circulation of paints and coatings
• Chemical cleaning supply pump
Typical Fluids Handled• Solventborne paints and coatings
• Waterborne paints and coatings
• Water
• Cleaning fluids
Bulldog 5:1Drum Pump
221104Bulldog 5:1
Stubby Pump206418
Reliable Bulldog
air motor
High output
2-ball piston pump Stainless steel
construction
Bulldog® 5:1Pneumatic 2-Ball Piston Pumps
31
1
LOW PRESSURE PUMPS ❚ F IN I SH ING EQU IPMENT
Bulldog 5:1Pneumatic 2-Ball Piston Pumps
Technical SpecificationsPump ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5:1
Maximum fluid outlet pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 500 psi (35 bar, 3.5 MPa)
Maximum air input pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 psi (7 bar, 0.7 MPa)
Fluid flow at 60 cpm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 gpm (56.7 lpm)
Volume per cycle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.25 gal (0.95 l)
Air consumption at 100 psi air @ 20 cpm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32 scfm (0.91 m3/min)
Sound pressure level at 100 psi air @ 20 cpm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .90 dBA
Air motor inlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3/4 npt(f)
Pump fluid inlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 npt(f)
Pump fluid outletCarbon steel drum length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1/2 npt(f)
Stainless steel stubby length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1/2 npt(f)
Stainless steel drum length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3/4 npt(f)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .98 lb. (44 kg)
Instruction manualStainless steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 306818
Carbon steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .307871
32
1
F IN I SH ING EQU IPMENT ❚ LOW PRESSURE PUMPS
Bulldog 5:1Pneumatic 2-Ball Piston Pumps
Dimensions for Bulldog 5:1 Stubby and Drum Pumps
B
A
Model A BBulldog 5:1 Stubby 19.25 in 40.5 in
(489 mm) (1029 mm)Bulldog 5:1 CS Drum 32.5 in 57.75 in
(826 mm) (1365 mm)Bulldog 5:1 SST Drum 32.25 in 53.5 in
(826 mm) (1359 mm)
Performance Chart for Bulldog 5:1 Stubby and Drum Pumps
AIR PRESSURES LEGEND
= @ 100 psi (7 bar, 0.7 MPa) Air Consumption
= @ 70 psi (4.8 bar, 0.5 MPa) Fluid Flow
= @ 40 psi (2.7 bar, 0.3 MPa)
ABC
FLUID FLOW(Pump tested in No. 10 weight oil)
FLU
ID O
UTL
ET P
RES
SUR
E p
si (
bar,
MPa
)
AIR
CO
NSU
MPT
ION
sc
fm (
m3 /
min
)
gpm 4 8 12 16(lpm) (15.1) (30.2) (45.4) (60.5)
100(2.8)
80(2.3)
60(1.7)
40(1.1)
20(0.6)
500(35, 3.5)
400(28, 2.8)
300(21, 2.1)
200(14, 1.4)
100(7, 0.7)
0
CYCLES PER MINUTE
16 32 48 64
B
A
C
A
B
C
33
1
LOW PRESSURE PUMPS ❚ F IN I SH ING EQU IPMENT
Bulldog 5:1Pneumatic 2-Ball Piston Pumps
Ordering InformationPump part number includes motor and lower displacement pump
Bulldog 5:1 Bulldog 5:1 Bulldog 5:1 Bulldog 5:1Pump part number 206418 206796 221104 207321Configuration Stubby Stubby Drum DrumAir motor 208356 208356 208356 208356
Lower displacement pump 206452 206453 210208 206452
Construction SST SST CS SST
Seal construction Buna/UHMWPE PTFE UHMWPE/Leather Buna/UHMWPE
Replacement Parts Ordering InformationAir motor repair kit 206734 206734 206734 206734
Standard seal repair kit 206931 207349 223439 206931
Construction Buna/UHMWPE PTFE UHMWPE/Leather Buna/UHMWPE
Optional seal repair kit N/A N/A 224443 N/A
Construction UHMWPE/PTFE
Displacement rod 206451 206451 217478 206451
Construction SST SST CS SST
Cylinder 166067 166067 181269 166067
Construction SST SST SST SST
Accessories206221 Wall Bracket
For mounting Bulldog pump to wall.
207579 Padded PliersFor servicing Bulldog air motor trip rod.
207484 Siphon Kit, AluminumUse to siphon fluid from a 5 gal (18.9 l) pail. Includes nylon suction hose 214960, 3/4 in ID, 3.5 ft (1.1 m) long, 3/4 in npt(f) swivel outlet fitting.
222916 Siphon Tube, Carbon Steel (Stubby only)Use to siphon fluid from a 55 gal (200 l) drum. Includes 8 ft x 1.5 in hose with 2 in npt adapter.
237068 Siphon Tube (Stubby only)Use to siphon fluid from a 5 gal (18.9 l) pail. Includes 6 ft x 1 in hose with 2 in npt adapter.
34
1
F IN I SH ING EQU IPMENT ❚ LOW PRESSURE PUMPS
Features and Benefits• Positive displacement, 4-ball piston design provides
large output per cycle to reduce pump wear and maintenance
• Small displacement rod design reduces sealing area to minimize throat leakage
• Gentle pumping action produces low-shear output for metallic or waterborne paint circulation
• Stainless steel and carbon steel models available to handle various fluids
Typical Applications• Paint circulation
• Fluid transfer and supply
Typical Fluids Handled• Waterborne paints
• Solventborne paints
• Acid catalyzed varnishes, enamels, and lacquers
President 3:1 220562
Straight (BSPP) or tapered (npt)
thread configurations available
Throat cartridge for
on-line throat seal
replacement
Low shear
4-ball pump
Senator 3.5:1 220568
High volume
output at low
cycle rates
President® 1.5:1, 2:1, 3:1; Senator® 2.5:1, 3.5:1; Bulldog® 4:1Pneumatic Mid-Range, High-Flo 4-Ball Piston Pumps
35
1
LOW PRESSURE PUMPS ❚ F IN I SH ING EQU IPMENT
President 1.5:1,2:1,3:1; Senator 2.5:1, 3.5:1; Bulldog 4:1Pneumatic Mid-Range, High-Flo 4-Ball Piston Pumps
Technical Specifications for PresidentPresident President President
Pump ratio 1.5:1 2:1 3:1
Maximum fluid outlet pressure 270 psi 360 psi 500 psi (19 bar, 1.9 MPa) (25 bar, 2.5 MPa) (34 bar, 3.4 MPa)
Maximum air input pressure 180 psi 180 psi 166 psi(12 bar, 1.2 MPa) (12 bar, 1.2 MPa) (11 bar, 1.1 MPa)
Fluid flow @ 60 cpm 18.2 gpm (68.9 lpm) 13 gpm (49.2 lpm) 9.7 gpm (36.9 lpm)
Volume per cycle 0.30 gal (1.1 l) 0.21 gal (0.83 l) 0.16 gal (0.61 l)
Air consumption @100 psi air @ 20 cpm 10 scfm (0.28 m3/min) 10 scfm (0.28 m3/min) 10 scfm (0.28 m3/min)
Sound pressure level @100 psi air @ 15 cpm 81 dBA 81 dBA 81 dBA
Air motor inlet 1/2 npt(f) 1/2 npt(f) 1/2 npt(f)
Pump fluid inlet 1-1/2 npt(f) 1-1/2 npt(f) 1-1/2 npt(f) or1-1/2 BSPP(f)
Pump fluid outlet 1 npt(f) 1 npt(f) 1 npt(f)1-1/4 BSPP(f)
Weight 59 lb. (27 kg) 66 lb. (30 kg) CS 66 lb. (30 kg) CS
59 lb. (27 kg) SST 59 lb. (27 kg) SST
Instruction manual 308793 308793 308793Note: President 3:1 models 220561, 220564, 237222, 237223, 239854 and 239855 have 1-1/2 in npt(f) fluid inlet. President 3:1 models 240618 and 240619 have
1-1/2 in BSPP(f) fluid inlet. President 3:1 models 220561, 220564, 237222, 237223, 239854 and 239855 have 1-1/2” npt(f) fluid outlet. President 3:1 models 240618 and240619 have 1-1/4” BSPP(f) fluid outlet. npt is National Pipe Taper thread. BSPP is British Standard Pipe Parallel thread for sanitary clamp installations.
Technical Specifications for Senator and BulldogSenator Senator Bulldog
Pump ratio 2.5:1 3.5:1 4:1
Maximum fluid outlet pressure 250 psi 350 psi 400 psi (17 bar, 1.7 MPa) (24 bar, 2.4 MPa) (28 bar, 2.8 MPa)
Maximum air input pressure 100 psi 100 psi 100 psi(7 bar, 0.7 MPa) (7 bar, 0.7 MPa) (7 bar, 0.7 MPa)
Fluid flow @ 60 cpm 24 gpm (89.9 lpm) 17.4 gpm (65.8 lpm) 24 gpm (90.8 lpm)
Volume per cycle 0.39 gal (1.46 l) 0.28 gal (1.07 l) 0.39 gal (1.46 l)
Air consumption @100 psi air @ 20 cpm 12 scfm (0.34 m3/min) 12 scfm (0.34 m3/min) 33 scfm (0.93 m3/min)
Sound pressure level @100 psi air @ 15 cpm 88.5 dBA 88.5 dBA 85.6 dBA
Air motor inlet 3/4 npsm(f) 3/4 npsm(f) 3/4 npsm(f)
Pump fluid inlet 1-1/2 npt(f) 1-1/2 npt(f) 1-1/2 npt(f) or1-1/2 BSPP(f)
Pump fluid outlet 1 npt(f) 1 npt(f) 1 npt(f)1-1/4 BSPP(f)
Weight 80 lb. (36 kg) CS 80 lb. (36 kg) CS 92 lb. (42 kg) CS
73 lb. (33 kg) SST 73 lb. (33 kg) SST 85 lb. (39 kg) SST
Instruction manual 308793 308793 308793Note: Bulldog 4:1 models 220577 and 220578 have 1-1/2 in npt(f) fluid inlet. Bulldog 4:1 models 240625 and 240626 have 1-1/2 in BSPP(f) fluid inlet. Bulldog 4:1 models
220577 and 220578 have 1 in npt(f) fluid outlet. Bulldog 4:1 models 240625 and 240626 have 1-1/4 in BSPP(f) fluid outlet. npt is National Pipe Taper thread. BSPP is British Standard Pipe Parallel thread for sanitary clamp installations.
36
1
F IN I SH ING EQU IPMENT ❚ LOW PRESSURE PUMPS
President 1.5:1,2:1,3:1; Senator 2.5:1, 3.5:1; Bulldog 4:1Pneumatic Mid-Range, High-Flo 4-Ball Piston Pumps
Performance Chart for President 1.5:1 Pump
Performance Chart for President 2:1 Pump
AIR PRESSURES LEGEND
= @ 100 psi (7 bar, 0.7 MPa) Air Consumption
= @ 70 psi (4.8 bar, 0.48 MPa) Fluid Flow
= @ 40 psi (2.7 bar, 0.3 MPa)
ABC
FLUID FLOW(Pump tested in No. 10 weight oil)
FLU
ID O
UTL
ET P
RES
SUR
E p
si (
bar,
MPa
)
AIR
CO
NSU
MPT
ION
sc
fm (
m3 /
min
)
gpm 4 8 12 16(lpm) (15.1) (30.2) (45.4) (60.5)
50(1.4)
40(1.3)
30(0.8)
20(0.6)
10(0.3)
40(1.3)
30(0.8)
20(0.6)
10(0.3)
0
300(21, 2.1)
250(17, 1.7)
200(14, 1.4)
150(10, 1.0)
100(7, 0.7)
50(3.5, 0.4)
0
CYCLES PER MINUTE
16 33 49 66
B
A
C
A
B
C
AIR PRESSURES LEGEND
= @ 100 psi (7 bar, 0.7 MPa) Air Consumption
= @ 70 psi (4.8 bar, 0.48 MPa) Fluid Flow
= @ 40 psi (2.8 bar, 0.28 MPa)
ABC
FLUID FLOW(Pump tested in No. 10 weight oil)
FLU
ID O
UTL
ET P
RES
SUR
E p
si (
bar,
MPa
)
AIR
CO
NSU
MPT
ION
sc
fm (
m3 /
min
)
gpm 3 6 9 12 15 18 21(lpm) 11 23 34 46 57 68 79
200(14, 1.4)
150(10.5, 1.05)
100(7, 0.7)
50(3.5, 0.35)
0
CYCLES PER MINUTE
10 18 27 36 45 54 63
B
A
C
A
B
C
37
1
LOW PRESSURE PUMPS ❚ F IN I SH ING EQU IPMENT
President 1.5:1,2:1,3:1; Senator 2.5:1, 3.5:1; Bulldog 4:1Pneumatic Mid-Range, High-Flo 4-Ball Piston Pumps
Performance Chart for President 3:1 Pump
Performance Chart for Senator 2.5:1 Pump
FLUID FLOW(Pump tested in No. 10 weight oil)
FLU
ID O
UTL
ET P
RES
SUR
E p
si (
bar,
MPa
)
gpm 2 4 6 8 10(lpm) (7.6) (15.1) (22.7) (30.2) (37.8)
50(1.40)
40(1.12)
30(0.84)
20(0.56)
10(0.28)
300(21, 2.1)
250(17, 1.7)
200(14, 1.4)
150(10, 1.0)
100(7, 0.7)
50(3.5, 0.4)
0
CYCLES PER MINUTE
12 25 37 50 62
B
A
C
A
B
C
FLU
ID O
UTL
ET P
RES
SUR
E ps
i (ba
r, M
Pa)
AIR
CO
NSU
MPT
ION
scf
m (
m3 /m
in)
250(17, 1.7)
200(14, 1.4)
150 (10, 1.0)
100 (7.0, 0.7)
50(3.5, 0.4)
0
50(1.4)
40(1.1)
30(0.8)
20(0.6)
10(0.3)
0
A
B
C
gpm 0 5 10 15 20 25 30 35(lpm) (18.9) (37.9) (56.8) (75.7) (94.5) (113.4) (132.3)
13 26 39 52 65 78 91
CYCLES PER MINUTE
FLUID FLOW(Pump tested in No. 10 Wt. Oil)
AIR PRESSURES LEGEND
A = @ 100 psi (7.0 bar, 0.7 MPa) Air Consumption
B = @ 70 psi (4.8 bar, 0.5 MPa) Fluid Flow
C = @ 40 psi (2.8 bar, 0.3 MPa)
C
B
A
AIR
CO
NSU
MPT
ION
scf
m (
m3 /m
in)
AIR PRESSURES LEGEND
A = @ 100 psi (7.0 bar, 0.7 MPa) Air Consumption
B = @ 70 psi (4.8 bar, 0.5 MPa) Fluid Flow
C = @ 40 psi (2.8 bar, 0.3 MPa)
38
1
F IN I SH ING EQU IPMENT ❚ LOW PRESSURE PUMPS
President 1.5:1,2:1,3:1; Senator 2.5:1, 3.5:1; Bulldog 4:1Pneumatic Mid-Range, High-Flo 4-Ball Piston Pumps
Performance Charts for Senator 3.5:1 Pump
Performance Chart for Bulldog 4:1 Pump
AIR PRESSURES LEGEND
= @ 100 psi (7 bar, 0.7 MPa) Air Consumption
= @ 70 psi (4.8 bar, 0.5 MPa) Fluid Flow
= @ 40 psi (2.8 bar, 0.3 MPa)
ABC
FLUID FLOW(Pump tested in No. 10 weight oil)
FLU
ID O
UTL
ET P
RES
SUR
E p
si (
bar,
MPa
)
AIR
CO
NSU
MPT
ION
sc
fm (
m3 /
min
)
gpm 3 6 9 12 15 18 21(lpm) (11.3) (22.7) (34.0) (45.4) (56.7) (68.0) (79.4)
100(2.8)
80(2.3)
60(1.7)
40(1.1)
20(0.6)
0
500(34, 3.4)
450(31, 3.1)
400(28, 2.8)
350(24, 2.4)
300(21, 2.1)
250(17, 1.7)
200(14, 1.4)
150(10, 1.0)
100(7, 0.7)
50(3.5, 0.4)
0
CYCLES PER MINUTE
8 15 23 30 38 45 53
B
A
C
A
B
C
AIR PRESSURES LEGEND
= @ 100 psi (7.0 bar, 0.7 MPa) Air Consumption
= @ 70 psi (4.8 bar, 0.5 MPa) Fluid Flow
= @ 40 psi (2.8 bar, 0.3 MPa)
ABC
FLUID FLOW(Pump tested in No. 10 weight oil)
FLU
ID O
UTL
ET P
RES
SUR
E p
si (
bar,
MPa
)
AIR
CO
NSU
MPT
ION
sc
fm (
m3 /
min
)
gpm 3 6 9 12 15 18 21(lpm) (11.3) (22.7) (34.0) (45.4) (56.7) (68.0) (79.4)
60(1.7)
50(1.4)
40(1.1)
30(0.8)
20(0.6)
10(0.3)
0
350(24, 2.4)
300(21, 2.1)
250(17, 1.7)
200(14, 1.4)
150(10, 1.0)
100(7, 0.7)
50(3.5, 0.4)
0
CYCLES PER MINUTE
10 21 31 41 52 62 72
B
A
C
A
B
C
39
1
LOW PRESSURE PUMPS ❚ F IN I SH ING EQU IPMENT
Dimensions for Bulldog 4:1 Pump
49.53 in(1258 mm)
28.04 in(712 mm)
Air Motor Inlet3/4 npsm(f)
Fluid Inlet1-1/2 npt(f) or1-1/2 BSPP(f)
Fluid Outlet1 npt(f) or
1-1/4 BSPP(f)
President 1.5:1,2:1,3:1; Senator 2.5:1, 3.5:1; Bulldog 4:1Pneumatic Mid-Range, High-Flo 4-Ball Piston Pumps
Dimensions for Senator 2.5:1 and 3.5:1 Pumps
Dimensions for President 1.5:1, 2:1, and 3:1 Pumps
A
C
B
Model A B CSenator 2.5:1 49.6 in 28 in 21.6 in
(1250 mm) (712 mm) (548 mm)Senator 3.5:1 49.6 in 28 in 21.6 in
(1250 mm) (712 mm) (548 mm)
A
B
C
Model A B CPresident 1.5:1, 2:1 Standard 45.6 in 28.78 in 16.82 in
(1158 mm) (731 mm) (427 mm)President 3:1 Standard 45.6 in 28.78 in 16.82 in
(1158 mm) (731 mm) (427 mm)President 3:1 Stubby 39.6 in 22.78 in 16.82 in
(1158 mm) (579 mm) (427 mm)
Air Inlet1/2 npt(f)
Fluid Outlet1 npt(f) or
1-1/4 BSPP(f)
Fluid Inlet1-1/2 npt(f)
Air Motor Inlet3/4 npsm(f)
Fluid Inlet1-1/2 npt(f)
Fluid Outlet1 npt(f)
40
1
F IN I SH ING EQU IPMENT ❚ LOW PRESSURE PUMPS
President 1.5:1,2:1,3:1; Senator 2.5:1, 3.5:1; Bulldog 4:1Pneumatic Mid-Range, High-Flo 4-Ball Piston Pumps
Ordering InformationPump part number includes motor and lower displacement pump
President 1.5:1 President 2:1 President 2:1 President 3:1Pump part number 220562 220560 220563 220561Configuration Standard Standard Standard StandardThread design npt npt npt npt
Air motor 205038 205038 205038 205038
Lower displacement pump 239838 239834 239837 239833
Construction SST CS SST CS
Piston seal construction UHMWPE UHMWPE UHMWPE UHMWPE
Throat seal construction UHMWPE/Leather UHMWPE/Leather UHMWPE/Leather UHMWPE/Leather
Replacement Parts Ordering InformationAir motor repair kit 207385 207385 207385 207385
Standard piston seal kit 220587 220588 220588 220589
Construction UHMWPE UHMWPE UHMWPE UHMWPE
Optional piston seal kit 224936 224935 224935 224934
Construction PTFE PTFE PTFE PTFE
Standard throat seal kit 239872 239872 239872 239872
Construction UHMWPE/Leather UHMWPE/Leather UHMWPE/Leather UHMWPE/Leather
Optional throat seal kit 239866 239866 239866 239866
Construction PTFE PTFE PTFE PTFE
Optional throat seal kit 239868 239868 239868 239868
Construction Leather Leather Leather Leather
Standard displacement rod 181898 181898 181898 181898
Construction SST SST SST SST
Optional displacement rod 685970 685970 685970 685970
Construction Ceramic Ceramic Ceramic Ceramic
Standard cylinder 183048 183032 183047 181899
Construction CS CS SST CS
Optional cylinder 686614 N/A N/A 685971
Construction Ceramic Ceramic
41
1
LOW PRESSURE PUMPS ❚ F IN I SH ING EQU IPMENT
President 1.5:1,2:1,3:1; Senator 2.5:1, 3.5:1; Bulldog 4:1Pneumatic Mid-Range, High-Flo 4-Ball Piston Pumps
Ordering Information, continued Pump part number includes motor and lower displacement pump
President 3:1 President 3:1 President 3:1 President 3:1 President 3:1 President 3:1Pump part number 237223 239855 220564 15D788 237222 239854Configuration Standard Stubby Standard Standard Standard StubbyThread design npt npt npt npt npt npt
Air motor 205038 205038 205038 205038 205038 205038
Lower displacement pump 239860 239833 239836 686679 239859 239836
Construction CS CS SST Ceramic SST SST
Piston seal construction PTFE UHMWPE UHMWPE UHMWPE PTFE UHMWPE
Throat seal construction PTFE UHMWPE/Leather UHMWPE/Leather UHMWPE/Leather PTFE UHMWPE/Leather
Replacement Parts Ordering InformationAir Motor repair kit 207385 207385 207385 207385 207385 207385
Standard piston seal kit 224934 220589 220589 220589 224934 220589
Construction PTFE UHMWPE UHMWPE UHMWPE PTFE UHMWPE
Optional piston seal kit 220589 224934 224934 224934 220589 224934
Construction UHMWPE PTFE PTFE PTFE UHMWPE PTFE
Standard throat seal kit 239866 239872 239872 239872 239866 239872
Construction PTFE UHMWPE/Leather UHMWPE/Leather UHMWPE/Leather PTFE UHMWPE/Leather
Optional throat seal kit 239872 239866 239866 239866 239872 239866
Construction UHMWPE/Leather PTFE PTFE PTFE UHMWPE/Leather PTFE
Optional throat seal kit 239868 239868 239868 239868 239868 239868
Construction Leather Leather Leather Leather Leather Leather
Standard displacement rod 181898 181898 181898 685970 181898 181898
Construction SST SST SST Ceramic SST SST
Optional displacement rod 685970 685970 685970 181898 685970 685970
Construction Ceramic Ceramic Ceramic SST Ceramic Ceramic
Standard cylinder 181899 181899 183049 685971 183049 183049
Construction CS CS SST Ceramic SST SST
Optional cylinder 685971 685971 685971 183049 685971 685971
Construction Ceramic Ceramic Ceramic SST Ceramic Ceramic
42
1
F IN I SH ING EQU IPMENT ❚ LOW PRESSURE PUMPS
President 1.5:1,2:1,3:1; Senator 2.5:1, 3.5:1; Bulldog 4:1Pneumatic Mid-Range, High-Flo 4-Ball Piston Pumps
Ordering Information, continued Pump part number includes motor and lower displacement pump
President 3:1 President 3:1 Senator 2.5:1 Senator 2.5:1 Senator 3.5:1Pump part number 240618 240619 220567 220570 220565Configuration Standard Standard Standard Standard StandardThread design BSPP w/ tri-clamp BSPP npt npt npt
Air motor 205038 205038 220571 220571 220571
Lower displacement pump 240610 240611 239835 239838 239834
Construction SST SST CS SST CS
Piston seal construction UHMWPE UHMWPE UHMWPE UHMWPE UHMWPE
Throat seal construction UHMWPE/Leather UHMWPE/Leather UHMWPE/Leather UHMWPE/Leather UHMWPE/Leather
Replacement Parts Ordering InformationAir motor repair kit 207385 207385 220916 220916 220916
Standard piston seal kit 220589 220589 220587 220587 220588
Construction UHMWPE UHMWPE UHMWPE UHMWPE UHMWPE
Optional piston seal kit 224934 224934 224936 224936 224935
Construction PTFE PTFE PTFE PTFE PTFE
Standard throat seal kit 239872 239872 239872 239872 239872
Construction UHMWPE/Leather UHMWPE/Leather UHMWPE/Leather UHMWPE/Leather UHMWPE/Leather
Optional throat seal kit 239866 239866 239866 239866 239866
Construction PTFE PTFE PTFE PTFE PTFE
Optional throat seal kit 239868 239868 239868 239868 239868
Construction Leather Leather Leather Leather Leather
Standard displacement rod 181898 181898 181898 181898 181898
Construction SST SST SST SST SST
Optional displacement rod 685970 685970 685970 685970 685970
Construction Ceramic Ceramic Ceramic Ceramic Ceramic
Standard cylinder 183049 183049 181900 183048 183032
Construction SST SST CS SST CS
Optional cylinder 685971 685971 686614 686614 N/A
Construction Ceramic Ceramic Ceramic Ceramic
43
1
LOW PRESSURE PUMPS ❚ F IN I SH ING EQU IPMENT
President 1.5:1,2:1,3:1; Senator 2.5:1, 3.5:1; Bulldog 4:1Pneumatic Mid-Range, High-Flo 4-Ball Piston Pumps
Ordering Information, continued Pump part number includes motor and lower displacement pump
Senator 3.5:1 Bulldog 4:1 Bulldog 4:1 Bulldog 4:1 Bulldog 4:1 Bulldog 4:1Pump part number 220568 220577 220578 15D789 240625 240626Configuration Standard Standard Standard Standard Standard StandardThread design npt npt npt npt BSPP w/ tri-clamp BSPP
Air motor 220571 215255 215255 215225 233077 233077
Lower displacement pump 239837 239835 239838 15D787 240606 240607
Construction SST CS SST Ceramic SST SST
Piston seal construction UHMWPE UHMWPE UHMWPE UHMWPE UHMWPE UHMWPE
Throat seal construction UHMWPE/Leather UHMWPE/Leather UHMWPE/Leather UHMWPE/Leather UHMWPE/Leather UHMWPE/Leather
Replacement Parts Ordering InformationAir motor repair kit 220916 215906 215906 215906 215906 215906
Standard piston seal kit 220588 220587 220587 220587 220587 220587
Construction UHMWPE UHMWPE UHMWPE UHMWPE UHMWPE UHMWPE
Optional piston seal kit 224935 224936 224936 224936 224936 224936
Construction PTFE PTFE PTFE PTFE PTFE PTFE
Standard throat seal kit 239872 239872 239872 239872 239872 239872
Construction UHMWPE/Leather UHMWPE/Leather UHMWPE/Leather UHMWPE/Leather UHMWPE/Leather UHMWPE/Leather
Optional throat seal kit 239866 239866 239866 239866 239866 239866
Construction PTFE PTFE PTFE PTFE PTFE PTFE
Optional throat seal kit 239868 239868 239868 239868 239868 239868
Construction Leather Leather Leather Leather Leather Leather
Standard displacement rod 181898 181898 181898 685970 181898 181898
Construction SST SST SST Ceramic SST SST
Optional displacement rod 685970 685970 685970 181898 685970 685970
Construction Ceramic Ceramic Ceramic SST Ceramic Ceramic
Standard cylinder 183047 181900 183048 686614 183048 183048
Construction SST CS SST Ceramic SST SST
Optional cylinder N/A 686614 686614 183048 686614 686614
Construction Ceramic Ceramic SST Ceramic Ceramic
Additional Lower Displacement PumpsThe following lower displacement pumps are not offered in complete President or Senator High-Flo® pump assemblies. To configure a complete pump with one of these lowers:1. Select desired lower displacement pump, based on fluid pressure and flow requirements, seal construction and desired
thread design.2. Order President air motor 205038 or Senator air motor 220571, based on fluid pressure requirements.3. Order appropriate pump connection kit: 221159 for President High-Flo pump or 220579 for Senator High-Flo pump.
Lower displacement pump 240612 240613 686679 240608 240609Thread design BSPP w/ tri-clamp BSPP npt BSPP w/ tri-clamp BSPP
Cylinder size small small small medium medium
Material of construction SST SST SST SST SST
Standard piston seal kit 224934 224934 220588 220588 220588
Construction PTFE PTFE UHMWPE UHMWPE UHMWPE
Standard throat seal kit 239866 239866 239872 239872 239872
Construction PTFE PTFE UHMWPE/Leather UHMWPE/Leather UHMWPE/Leather
Standard displacement rod 181898 181898 685970 181898 181898
Construction SST SST Ceramic SST SST
Standard cylinder 183049 183049 685971 183047 183047
Construction SST SST Ceramic SST SST
44
1
F IN I SH ING EQU IPMENT ❚ LOW PRESSURE PUMPS
President 1.5:1,2:1,3:1; Senator 2.5:1, 3.5:1; Bulldog 4:1Pneumatic Mid-Range, High-Flo 4-Ball Piston Pumps
Accessories220581 Pump Floor Stand
For mounting High-Flo pumps in a suction-feed system.
206221 Pump Wall BracketFor mounting a President, Senator or Bulldog High-Flo pumpto a wall.
218028 Portable CartFor mounting a President, Senator or Bulldog High-Flo pumpto a 2-wheel cart.
236054 Siphon Tube, Carbon SteelUse to siphon fluid from a 55 gal (200 l) drum. Includesnylon suction hose 109105, 3/4 in ID, 6 ft (1.8 m) long, 1-1/2 in npt(m) outlet fitting.
239805 Intake Valve Seat with relief valve, carbide seat
239865 Intake Valve Seat without relief valve, carbide seat
239869 Throat Cartridge Conversion KitConverts Series A Mid-Range High-Flo pump designs to athroat cartridge design. Includes stainless steel pump hous-ing, throat cartridge and ptfe o-ring.
207579 Padded PliersFor servicing President air trip rod.
110335 Packing Nut WrenchFor adjusting throat packings compression in pump.
171818 Adjustment ToolA 0.145 in (3.7 mm) gauge used to ensure proper clear-ance between the poppets and the piston on the Presidentair motor.
239867 Intake Seat Conversion KitConverts Series A Mid-Range High-Flo pump designs tointake seat design with relief valve. Includes intake seat withrelief valve, stainless intake housing, intake seat withoutrelief valve, gaskets, washers and cap screws.
221159 Pump Mounting Adapter Kit, PresidentProvides adapter plate and tie rods for mounting Presidentmotor to a Mid-Range High-Flo displacement pump.
243801 President Remote Exhaust Muffler KitKit allows for remote exhaust piping to be installed toPresident air motor exhaust port. Redirects noise andexhaust contaminants to a remote location. Kit includes airmotor covers with 3/4 npt(f) exhaust port and cork gaskets.
243421 President Muffler KitKit includes external muffler and plates and gaskets used inmuffler kit 243801. External muffler provides noise reduc-tion to President air motor.
45
1
LOW PRESSURE PUMPS ❚ F IN I SH ING EQU IPMENT
Features and Benefits• Hydraulic power is an effective alternative to compressed
air systems, as it provides:-lower operating costs (up to three times more efficient than air)
-quiet operation-reduced downtime with hydraulic motor-no potential icing issues
• Positive displacement, 4-ball piston design, provides largeoutput per cycle to reduce pump wear and maintenance
• Small displacement rod reduces sealing area to minimizethroat leakage
• Gentle pumping action produces low-shear output for metallic or waterborne paint circulation
• Stainless steel and carbon steel models available to handlevarious fluids
Typical Applications• Paint circulation
• Fluid transfer and supply
Typical Fluids Handled• Waterborne paints
• Solventborne paints
• Acid catalyzed varnishes, enamels and lacquers
Energy efficientViscount I+ motor reduces energy costs
Throat cartridge foron-line throat sealreplacement
Low-shear4-ball pump
Viscount I+ 225236713
High volume output at low cycle rates
Viscount® I+ 225, 300, 450Hydraulic Mid-Range, High-Flo 4-Ball Piston Pumps
46
1
F IN I SH ING EQU IPMENT ❚ LOW PRESSURE PUMPS
Viscount I+ 225, 300, 450Hydraulic Mid-Range, High-Flo 4-Ball Piston Pumps
Technical SpecificationsViscount I+ 225 Viscount I+ 300 Viscount I+ 450
Pump ratio 0.15:1 0.20:1 0.30:1
Maximum fluid outlet pressure 225 psi 300 psi 450 psi (16 bar, 1.6 MPa) (21 bar, 2.1 MPa) (31 bar, 3.1 MPa)
Maximum hydraulic input pressure 1500 psi 1500 psi 1500 psi(103 bar, 10.3 MPa) (103 bar, 10.3 MPa) (103 bar, 10.3 MPa)
Oil flow @ 60 cpm 3.5 gpm (13.2 lpm) 3.5 gpm (13.2 lpm) 3 gpm (11.3 lpm)
Fluid flow @ 60 cpm 20 gpm (75.6 lpm) 14.7 gpm (53.9 lpm) 9.6 gpm (36.4 lpm)
Volume per cycle 0.33 gal (1.23 l) 0.24 gal (0.90 l) 0.16 gal (0.61 l)
Sound pressure level @1500 psi oil @ 20 cpm 78 dBA 78 dBA 78 dBA
Hydraulic fluid inlet 3/4 in (37º flare) 3/4 in (37º flare) 3/4 in (37º flare)
Hydraulic fluid outlet 7/8 in (37º flare) 7/8 in (37º flare) 7/8 in (37º flare)
Pump fluid inlet 1-1/2 npt(f) 1-1/2 npt(f) 1-1/2 npt(f)
Pump fluid outlet 1 npt(f) 1 npt(f) 1 npt(f)
Weight 76 lb. (35 kg) CS 76 lb. (35 kg) CS 76 lb. (35 kg) CS
69 lb. (32 kg) SST 69 lb. (32 kg) SST 69 lb. (32 kg) SST
Instruction manual 308793 308793 308793
Performance Chart for Viscount I+ 450
47
1
LOW PRESSURE PUMPS ❚ F IN I SH ING EQU IPMENT
Dimensions
49.0 in(1245 mm)
Hydraulic Inlet3/4 unf (37° flare)
Fluid Outlet1 npt(f)
Fluid Inlet1-1/2 npt(f)
Hydraulic Outlet7/8 unf (37° flare)
28.0 in(711 mm)
FLU
ID O
UTL
ET P
RES
SUR
E ps
i (ba
r, M
Pa)
500 (34, 3.4)
400 (28, 2.8)
300 (21, 2.1)
200 (14, 1.4)
100(7.0, 0.7)
0
A
B
C
gpm (lpm) 0 3 (11.4) 6 (22.7) 9 (34.1) 12 (45.4) 15 (56.8)Hydraulic 1 (3.8) 1.9 (7.2) 2.8 (10.8) 3.8 (14.4) 4.8 (18.0)
19 38 57 76 95
CYCLES PER MINUTE
FLUID FLOWPump tested in No. 10 Wt. Oil
HYDRAULIC PRESSURES
A = @ 1500 psi (103 bar, 10.3 MPa)
B = @ 1000 psi (69 bar, 6.9 MPa)
C = @ 500 psi (34 bar, 3.4 MPa)
Viscount I+ 225, 300, 450Hydraulic Mid-Range, High-Flo 4-Ball Piston Pumps
Performance Chart for Viscount I+ 225
FLU
ID O
UTL
ET P
RES
SUR
E ps
i (ba
r, M
Pa)
300 (21, 2.1)
200(14, 1.4)
250 (17, 1.7)
150(10, 1.0)
100(7.0, 0.7)
50(3.5, 0.4)
0
A
B
C
gpm (lpm) 0 4 (15.1) 8 (30.3) 12 (45.4) 16 (60.6) 20 (75.7)Hydraulic gpm (lpm) 0.6 (2.3) 1.2 (4.5) 1.8 (6.8) 2.4 (9.1) 3.0 (11.3)
FLUID FLOWPump tested in No. 10 Wt. Oil
HYDRAULIC PRESSURES
A = @ 1500 psi (103 bar, 10.3 MPa)
B = @ 1000 psi (69 bar, 6.9 MPa)
C = @ 500 psi (34 bar, 3.4 MPa)
12 24 36 48 60
Fluid
CYCLES PER MINUTE
Performance Chart for Viscount I+ 300
FLU
ID O
UTL
ET P
RES
SUR
E ps
i (ba
r, M
Pa)
300(21, 2.1)
250 (17, 1.7)
200(14, 1.4)
150(10, 1.0)
100 (7.0, 0.7)
50(3.5, 0.4)
0d Flow gpm (lpm) 0 8 (30) 16 (61) 24 (91) 32 (121) 40 (151) 48 (181) 56 (212)
draulic gpm (lpm) 1.6 (6) 3 (11) 4.6 (17.4) 6.0 (22.7) 7.6 (28.7) 9.2 (34.8) 10.6 (40.1)
8 15 23 30 38 46 53
CYCLES PER MINUTE
FLUID FLOWPump tested in No. 10 Wt. Oil
HYDRAULIC OIL PRESSURES
A = @ 1500 psi (103 bar, 10.3 MPa)
B = @ 1050 psi (72 bar, 7.2 MPa)
C = @ 600 psi (41 bar, 4.1 MPa)
A
B
C
48
1
F IN I SH ING EQU IPMENT ❚ LOW PRESSURE PUMPS
Viscount I+ 225, 300, 450Hydraulic Mid-Range, High-Flo 4-Ball Piston Pumps
Ordering InformationPump part number includes motor and lower displacement pump
Viscount I+ 225 Viscount I+ 300 Viscount I+ 300 Viscount I+ 450 Viscount I+ 450 Viscount I+ 450Pump part number 236712/236713 236605 236606 236601 236602 244142Hydraulic motor/reciprocator 236417 236417 236417 236417 236417 236417
Lower displacement pump 239835/239838 239834 239837 239833 239836 239859
Construction CS/SST CS SST CS SST SST
Piston seal construction UHMWPE UHMWPE UHMWPE UHMWPE UHMWPE PTFE
Throat seal construction UHMWPE/Leather UHMWPE/Leather UHMWPE/Leather UHMWPE/Leather UHMWPE/Leather PTFE
Replacement Parts Ordering InformationAir motor repair kit 236698 236698 236698 236698 236698 236698
Standard piston seal kit 220587 220588 220588 220589 220589 224934
Construction UHMWPE UHMWPE UHMWPE UHMWPE UHMWPE PTFE
Optional piston seal kit 224936 224935 224935 224934 224934 220589
Construction PTFE PTFE PTFE PTFE PTFE UHMWPE
Standard throat seal kit 239872 239872 239872 239872 239872 239866
Construction UHMWPE/Leather UHMWPE/Leather UHMWPE/Leather UHMWPE/Leather UHMWPE/Leather PTFE
Optional throat seal kit 239866 239866 239866 239866 239866 239872
Construction PTFE PTFE PTFE PTFE PTFE UHMWPE/Leather
Optional throat seal kit 239868 239868 239868 239868 239868 239868
Construction Leather Leather Leather Leather Leather Leather
Standard displacement rod 181898 181898 181898 181898 181898 181898
Construction SST SST SST SST SST SST
Optional displacement rod 685970 685970 685970 685970 685970 685970
Construction Ceramic Ceramic Ceramic Ceramic Ceramic Ceramic
Standard cylinder 181900/183048 183032 183047 181899 183049 183049
Construction CS/SST CS SST CS SST SST
Optional cylinder 686614 N/A N/A 685971 685971 685971
Construction Ceramic Ceramic Ceramic Ceramic
49
1
LOW PRESSURE PUMPS ❚ F IN I SH ING EQU IPMENT
Viscount I+ 225, 300, 450Hydraulic Mid-Range, High-Flo 4-Ball Piston Pumps
Ordering InformationAdditional Lower Displacement PumpsLower displacement pump 240610 240611 240612 240613
Cylinder size small small small small
Thread design BSPP w/ tri-clamp BSPP BSPP w/ tri-clamp BSPP
Material of construction SST SST SST SST
Standard piston seal kit 220589 220589 224934 224934
Construction UHMWPE UHMWPE PTFE PTFE
Standard throat seal kit 239872 239872 239866 239866
Construction UHMWPE/Leather UHMWPE/Leather PTFE PTFE
Standard displacement rod 181898 181898 181898 181898
Construction SST SST SST SST
Standard cylinder 183049 183049 183049 183049
Construction SST SST SST SST
Additional Lower Displacement PumpsLower displacement pump 686679 240608 240609 240606 240607
Cylinder size small medium medium large large
Thread design npt BSPP w/ tri-clamp BSPP BSPP w/ tri-clamp BSPP
Material of construction SST SST SST SST SST
Standard piston seal kit 220588 220588 220588 220587 220587
Construction UHMWPE UHMWPE UHMWPE UHMWPE UHMWPE
Standard throat seal kit 239872 239872 239872 239872 239872
Construction UHMWPE/Leather UHMWPE/Leather UHMWPE/Leather UHMWPE/Leather UHMWPE/Leather
Standard displacement rod 685970 181898 181898 181898 181898
Construction Ceramic SST SST SST SST
Standard cylinder 685971 183047 183047 183048 183048
Construction Ceramic SST SST SST SST
Note: npt is National Pipe Taper threadBSPP is British Standard Pipe Parallel thread for sanitary clamp installationsBSPP with tri-clamp design is configured with tri-clamp adapter
50
1
F IN I SH ING EQU IPMENT ❚ LOW PRESSURE PUMPS
Viscount I+ 225, 300, 450Hydraulic Mid-Range, High-Flo 4-Ball Piston Pumps
Accessories206221 Wall Bracket
For mounting a Viscount I+ High-Flo pump to a wall.
220581 Pump Floor Stand For mounting High-Flo pumps in a suction feed system.
189305 Assembly ToolRequired for servicing the yoke and trip rod in the motor.
110335 Packing Nut WrenchFor adjusting throat packings compression in pump.
515258 Hydraulic Pressure Control Valve3/4 npt inlet, 3/4 npt outlet, 1/4 npt drain, 1/4 npt gauge.
Hydraulic Shutoff Valves512150 Maximum working pressure: 2000 psi
(13.8 MPa, 138 bar). 1/2 npt (fbe).
102644 Maximum working pressure: 3000 psi(20.7 MPa, 207 bar). 3/4 npt (fbe).
102646 Maximum working pressure: 3000 psi(20.7 MPa, 207 bar). 1 npt (fbe).
169236 Hydraulic Oil5 gal (18.9 l) size.
236714 Mounting Plate KitFor mounting a Viscount I+ hydraulic motor and reciprocator to a Mid-Range High-Flo displacement pump.
236054 Siphon Tube, Carbon SteelUse to siphon fluid from a 55 gal (200 l) drum. Includes nylon suction hose 109105, 3/4 in ID, 6 ft (1.8 m) long, 1-1/2 in npt(m) outlet fitting.
239805 Intake Valve Seat with Relief Valve, Carbide Seat
239865 Intake Valve Seat Without Relief Valve, Carbide Seat
239869 Throat Cartridge Conversion KitConverts Series A Mid-Range High-Flo pump designs to athroat cartridge design. Includes stainless steel pumphousing, throat cartridge and PTFE o-ring.
239867 Intake Seat Conversion KitConverts series A Mid-Range High-Flo pump designs tointake seat design with relief valve. Includes intake seatwith relief valve, stainless intake housing, intake seat without relief valve, gaskets, washers and cap screws.
221159 Pump Mounting Adapter Kit, Viscount I+Provides adapter plate and tie rods for mounting Viscount I+ motor/reciprocator to a Mid-Range High-Flodisplacement pump.
51
1
LOW PRESSURE PUMPS ❚ F IN I SH ING EQU IPMENT
Features and Benefits• Rugged and reliable King and Bulldog air motor provides
maintenance-free operation
• Positive displacement, 4-ball piston design provides largeoutput per cycle to reduce pump wear and maintenance
• Gentle pumping action produces low-shear output formetallic or waterborne paint circulation
• Small displacement rod design reduces sealing area to minimize throat leakage
• Stainless steel and carbon steel models available to handle various fluids
Typical Applications• Automotive paint circulation
• High volume paint and coating transfer
Typical Fluids Handled• Waterborne paints
• Solventborne paints
• Stains, enamels and lacquers
King 3:1243749
Remote exhaust port forsound level reduction
Reliable King Air Motor
PlasmaCoat™ displacement rod for extended throat seal life
Smooth profile piston for easyflushing and quick colorchange capability
Straight (BSPP) or tapered (npt) thread configurations available
Throat cartridge for on-line throat seal replacement
Bulldog® 3:1; King® 3:1, 4:1, 6:1Pneumatic Large Volume, High-Flo® Plus 4-Ball Piston Pumps
52
1
F IN I SH ING EQU IPMENT ❚ LOW PRESSURE PUMPS
Bulldog 3:1; King 3:1, 4:1, 6:1 Pneumatic Large Volume, High-Flo Plus 4-Ball Piston Pumps
Technical SpecificationsBulldog King King King
Pump ratio 3:1 3:1 4:1 6:1
Maximum fluid outlet pressure 300 psi 270 psi 360 psi 540 psi(21 bar, 2.1 MPa) (19 bar, 1.9 MPa) (25 bar, 2.5 MPa) (37 bar, 3.7 MPa)
Maximum air input pressure 100 psi 90 psi 90 psi 90 psi(7 bar, 0.7 MPa) (6.2 bar, 0.6 MPa) (6.2 bar, 0.6 MPa) (6.2 bar, 0.6 MPa)
Fluid flow @ 60 cpm 31 gpm (119 lpm) 63 gpm (239 lpm) 47 gpm (179 lpm) 31 gpm (119 lpm)
Volume per cycle 0.5 gal (2.0 l) 1.0 gal (4.0 l) 0.8 gal (3.0 l) 0.5 gal (2.0 l)
Air consumption at 90 psi air @ 20 cpm 30 scfm (0.85 m3/min) 70 scfm (1.98 m3/min) 70 scfm (1.98 m3/min) 70 scfm (1.98 m3/min)
Sound pressure level at 90 psi air @ 20 cpm 85 dBA 87 dBA 87 dBA 87 dBA
Air motor inlet 3/4 npsm(f) 3/4 npsm(f) 3/4 npsm(f) 3/4 npsm(f)
Pump fluid inlet 2 npt(f) or 2 npt(f) or 2 npt(f) or 2 npt(f) or2 BSPP(f) 2 BSPP(f) 2 BSPP(f) 2 BSPP(f)
Pump fluid outlet 2 npt(f) or 2 npt(f) or 2 npt(f) or 2 npt(f) or2 BSPP(f) 2 BSPP(f) 2 BSPP(f) 2 BSPP(f)
Weight 75 lb. (167 kg) 84 lb. (187 kg) 84 lb. (187 kg) 84 lb. (187 kg)
Instruction manual 309136 309136 309136 309136Note: Reference ordering information for further details on models available in npt and BSPP thread configurations
npt is National Pipe Taper thread
BSPP is British Standard Pipe Parallel thread for sanitary clamp installations
A
B
FE
D
C
Model A B C D E FBulldog 21.25 in 29.28 in 40 in 8.2 in 21.7 in 25.2 in
(540 mm) (732 mm) (1003 mm) (205 mm) (551 mm) (641.7 mm)King 21.25 in 29.28 in 40 in 8.2 in 21.7 in 25.2 in
(540 mm) (732 mm) (1003 mm) (205 mm) (551 mm) (641.7 mm)Pump Stand 218742 not included with pump
Dimensions
Fluid Outlet2 npt(f) or2 BSPP(f)
Air Inlet3/4 npsm(f)
Fluid Inlet2 npt(f) or2 BSPP(f)
53
1
LOW PRESSURE PUMPS ❚ F IN I SH ING EQU IPMENT
Bulldog 3:1; King 3:1, 4:1, 6:1 Pneumatic Large Volume, High-Flo Plus 4-Ball Piston Pumps
Performance Chart for King 3:1 High-Flo Plus Pump
AIR PRESSURES LEGEND
= @ 90 psi (6.3 bar, 0.6 MPa) Air Consumption
= @ 70 psi (4.8 bar, 0.5 MPa) Fluid Flow
= @ 40 psi (2.8 bar, 0.3 MPa)
ABC
FLUID FLOW(Pump tested in No. 10 weight oil)
FLU
ID O
UTL
ET P
RES
SUR
E p
si (
bar,
MPa
)
AIR
CO
NSU
MPT
ION
sc
fm (
m3 /
min
)
gpm 8 16 24 32 40 48 56(lpm) (30.2) (60.5) (90.7) (121.0) (151.2) (181.4) (211.7)
250(7.1)
200(5.7)
150(4.2)
100(2.8)
50(1.4)
300(21, 2.1)
250(17, 1.7)
200(14, 1.4)
150(10, 1.0)
100(7, 0.7)
50(3.5, 0.3)
0
CYCLES PER MINUTE
8 15 23 30 38 46 53
Performance Chart for Bulldog 3:1 High-Flo Plus Pump
AIR PRESSURES LEGEND
= @ 100 psi (7 bar, 0.7 MPa) Air Consumption
= @ 70 psi (4.8 bar, 0.5 MPa) Fluid Flow
= @ 40 psi (2.8 bar, 0.3 MPa)
ABC
FLUID FLOW(Pump tested in No. 10 weight oil)
FLU
ID O
UTL
ET P
RES
SUR
E p
si (
bar,
MPa
)
AIR
CO
NSU
MPT
ION
sc
fm (
m3 /
min
)
gpm 8 16 24 32 40 48 56 64(lpm) (30.2) (60.5) (90.7) (121.0) (151.2) (181.4) (211.7) (241.9)
300(8.5)
250(7.1)
200(5.7)
150(4.2)
100(2.8)
50(1.4)
350(24, 2.4)
300(21, 2.1)
250(17, 1.7)
200(14, 1.4)
150(10, 1.0)
100(7, 0.7)
50(3.5, 0.3)
0
CYCLES PER MINUTE
15 31 46 62 77 93 108
B
A
C
A
B
C
B
C
A
B
C
A
54
1
F IN I SH ING EQU IPMENT ❚ LOW PRESSURE PUMPS
Bulldog 3:1; King 3:1, 4:1, 6:1 Pneumatic Large Volume, High-Flo Plus 4-Ball Piston Pumps
Performance Chart for King 6:1 High-Flo Plus Pump
AIR PRESSURES LEGEND
= @ 90 psi (6.3 bar, 0.6 MPa) Air Consumption
= @ 70 psi (4.8 bar, 0.5 MPa) Fluid Flow
= @ 40 psi (2.8 bar, 0.3 MPa)
ABC
Performance Chart for King 4:1 High-Flo Plus Pump
AIR PRESSURES LEGEND
= @ 90 psi (6.3 bar, 0.6 MPa) Air Consumption
= @ 70 psi (4.8 bar, 0.5 MPa) Fluid Flow
= @ 40 psi (2.8 bar, 0.3 MPa)
ABC
FLUID FLOW(Pump tested in No. 10 weight oil)
FLU
ID O
UTL
ET P
RES
SUR
E p
si (
bar,
MPa
)
AIR
CO
NSU
MPT
ION
sc
fm (
m3 /
min
)
gpm 10 20 30 40 50 60(lpm) (37.8) (75.6) (113.4) (151.2) (189.0) (226.8)
300(8.5)
250(7.1)
200(5.7)
150(4.3)
100(2.8)
50(1.4)
600(41, 4.1)
500(34, 3.4)
400(28, 2.8)
300(21, 2.1)
200(14, 1.4)
100(7, 0.7)
0
CYCLES PER MINUTE
19 39 58 77 96 116
B
A
C
BC
FLUID FLOW(Pump tested in No. 10 weight oil)
FLU
ID O
UTL
ET P
RES
SUR
E p
si (
bar,
MPa
)
AIR
CO
NSU
MPT
ION
sc
fm (
m3 /
min
)gpm 0 8 16 24 32 40 48 56(lpm) (30.2) (60.5) (90.7) (121.0) (151.2) (181.4) (211.7)
250(7.1)
200(5.7)
150(4.3)
100(2.8)
50(1.4)
500(34, 3.4)
400(28, 2.8)
300(21, 2.1)
200(14, 1.4)
100(7, 0.7)
50(3.5, 0.3)
0
CYCLES PER MINUTE
10 19 29 38 48 58 67
B
C
A
C
A
B
A
55
1
LOW PRESSURE PUMPS ❚ F IN I SH ING EQU IPMENT
Bulldog 3:1; King 3:1, 4:1, 6:1 Pneumatic Large Volume, High-Flo® Plus 4-Ball Piston Pumps
Ordering InformationPump part number includes motor and lower displacement pump
Bulldog 3:1 Bulldog 3:1 Bulldog 3:1 King 3:1 King 3:1Pump Part Number 243737 243743 243744 243749 243750Thread design npt npt BSPP npt BSPP
Air motor 215255 215255 233077 220106 235525
Lower displacement pump 243731 243771 243734 243736 243736
Construction CS SST SST SST SST
Piston seal construction UHMWPE UHMWPE UHMWPE UHMWPE UHMWPE
Throat seal construction UHMWPE/Leather UHMWPE/Leather UHMWPE/Leather UHMWPE/Leather UHMWPE/Leather
Replacement Parts Ordering InformationAir motor repair kit 215906 215906 215906 207730 207730
Standard piston seal kit 243727 243727 243727 243729 243729
Construction UHMWPE UHMWPE UHMWPE UHMWPE UHMWPE
Optional piston seal kit 235856 235856 235856 235854 235854
Construction PTFE PTFE PTFE PTFE PTFE
Standard throat seal kit 243671 243671 243671 243671 243671
Construction UHMWPE/Leather UHMWPE/Leather UHMWPE/Leather UHMWPE/Leather UHMWPE/Leather
Optional throat seal kit 243672 243672 243672 243672 243672
Construction PTFE/Leather PTFE/Leather PTFE/Leather PTFE/Leather PTFE/Leather
Optional throat seal kit 243673 243673 243673 243673 243673
Construction UHMWPE Triple Lip™ UHMWPE Triple Lip UHMWPE Triple Lip UHMWPE Triple Lip UHMWPE Triple Lip
Standard displacement rod 196228 196228 196228 196228 196228
Construction SST/PlasmaCoat™ SST/PlasmaCoat SST/PlasmaCoat SST/PlasmaCoat SST/PlasmaCoat
Optional displacement rod 185197 185197 185197 185197 185197
Construction SST/Chrome SST/Chrome SST/Chrome SST/Chrome SST/Chrome
Optional displacement rod 685954 685954 685954 685954 685954
Construction Ceramic Ceramic Ceramic Ceramic Ceramic
Standard cylinder 180499 180499 180499 180497 180497
Construction SST/Chrome SST/Chrome SST/Chrome SST/Chrome SST/Chrome
Optional cylinder N/A N/A N/A 686522 686522
Construction Ceramic Ceramic
56
1
F IN I SH ING EQU IPMENT ❚ LOW PRESSURE PUMPS
Bulldog 3:1; King 3:1, 4:1, 6:1 Pneumatic Large Volume, High-Flo Plus 4-Ball Piston Pumps
The following lower displacement pump is not offered in acomplete King 3:1 High-Flo Plus pump assembly. To configure a complete carbon steel King 3:1 High-Flo Pluspump:1. Order lower displacement pump 243733.
2. Order King air motor 220106.
3. Order tie rods 180487 (qty:3), locknuts 102216 (qty:3),couplers 184129 (qty:2) and coupling nut 186925.
Additional Lower Displacement Pumps for King 3:1Lower displacement pump 243733
Cylinder size large
Thread design npt
Material of construction CS
Standard piston seal kit 243729
Construction UHMWPE
Standard throat seal kit 243671
Construction UHMWPE/Leather
Standard displacement rod 196228
Construction SST/PlasmaCoat
Standard cylinder 180497
Construction SST/Chrome
Ordering Information, continued Pump part number includes motor and lower displacement pump
King 4:1 King 4:1 King 4:1 King 6:1 King 6:1 King 6:1Pump Part Number 243739 243747 243748 243738 243745 243746Thread design npt npt BSPP npt npt BSPP
Air motor 220106 220106 235525 220106 220106 235525
Lower displacement pump 243732 243735 243735 243731 243734 243734
Construction CS SST SST CS SST SST
Piston construction UHMWPE UHMWPE UHMWPE UHMWPE UHMWPE UHMWPE
Throat seal construction UHMWPE/Leather UHMWPE/Leather UHMWPE/Leather UHMWPE/Leather UHMWPE/Leather UHMWPE/Leather
Replacement Parts Ordering InformationAir motor repair kit 207730 207730 207730 207730 207730 207730
Standard piston seal kit 243728 243728 243728 243727 243727 243727
Construction UHMWPE UHMWPE UHMWPE UHMWPE UHMWPE UHMWPE
Optional piston seal kit 235855 235855 235855 235856 235856 235856
Construction PTFE PTFE PTFE PTFE PTFE PTFE
Standard throat seal kit 243671 243671 243671 243671 243671 243671
Construction UHMWPE/Leather UHMWPE/Leather UHMWPE/Leather UHMWPE/Leather UHMWPE/Leather UHMWPE/Leather
Optional throat seal kit 243672 243672 243672 243672 243672 243672
Construction PTFE/Leather PTFE/Leather PTFE/Leather PTFE/Leather PTFE/Leather PTFE/Leather
Optional throat seal kit 243673 243673 243673 243673 243673 243673
Construction UHMWPE Triple Lip UHMWPE Triple Lip UHMWPE Triple Lip UHMWPE Triple Lip UHMWPE Triple Lip UHMWPE Triple Lip
Standard displacement rod 196228 196228 196228 196228 196228 196228
Construction SST/PlasmaCoat SST/PlasmaCoat SST/PlasmaCoat SST/PlasmaCoat SST/PlasmaCoat SST/PlasmaCoat
Optional displacement rod 185197 185197 185197 185197 185197 185197
Construction SST/Chrome SST/Chrome SST/Chrome SST/Chrome SST/Chrome SST/Chrome
Optional displacement rod 685954 685954 685954 685954 685954 685954
Construction Ceramic Ceramic Ceramic Ceramic Ceramic Ceramic
Standard cylinder 180498 180498 180498 180499 180499 180499
Construction SST/Chrome SST/Chrome SST/Chrome SST/Chrome SST/Chrome SST/Chrome
57
1
LOW PRESSURE PUMPS ❚ F IN I SH ING EQU IPMENT
Bulldog 3:1; King 3:1, 4:1, 6:1 Pneumatic Large Volume, High-Flo Plus 4-Ball Piston Pumps
Accessories218742 Pump Floor Stand
For mounting High-Flo pump to the floor.
196321 Pump Adapter FittingUse to convert a BSPP thread High-Flo Plus pump to a nptthread, 2 in BSPP(m) x 2 in npt(f).
193424 Pump Adapter Fitting SealSeal used with pump adapter fitting 196321.
237744 Intake Valve Seat, with Internal Pressure Relief Valve
180529 Intake Valve Seat, without Relief Valve
243948 Coupling Kit with Displacement Rod, PlasmaCoatIncludes coupling collars, coupling nut and 196228SST/PlasmaCoat displacement rod.
207579 Padded PliersFor servicing Bulldog and King air motor trip rod.
222649 Coupling Kit with Displacement RodIncludes coupling collars, coupling nut and 185197SST/Chrome displacement rod.
220384 Piston Shaft Tool KitTool to make removal of the piston shaft from the piston nut easier.
220385 Seat Puller KitTool to make removal of the seats from the manifoldseasier.
High-Flo Plus Throat Conversion KitsConverts High-Flo pump designs to a throat cartridge
243667 Cartridge Wet CupIncludes wet cup only.
243763 Throat Cartridge Kit Includes wet cup and UHMWPE/Leather throat packing kit.
243764 Throat Cartridge KitIncludes wet cup and PTFE/Leather throat packing kit.
243765 Throat Cartridge KitIncludes wet cup and UHMWPE Triple Lip™ throat kit.
High-Flo Plus Piston Conversion KitsConverts High-Flo pump designs to the new High-Flo Plus pistonplates and piston seal
243707 High-Flo Plus 300Includes High-Flo Plus piston plates, jam nut, o-rings andpiston seal kit. For King 3:1 pumps.
243706 High-Flo Plus 400Includes High-Flo Plus piston plates, jam nut, o-rings andpiston seal kit. For King 4:1 pumps.
243705 High-Flo Plus 600Includes High-Flo Plus piston plates, jam nut, o-rings andpiston seal kit. For King 6:1 and Bulldog 3:1 pumps.
58
1
F IN I SH ING EQU IPMENT ❚ LOW PRESSURE PUMPS
Features and Benefits• Hydraulic power is an effective alternative to compressed
air systems, as it provides:- lower operating costs (up to three times more
efficient than air)- quiet operation- reduced downtime with hydraulic motor- no potential icing issues
• Positive displacement, 4-ball piston design, provides largeoutput per cycle to reduce pump wear and maintenance
• Gentle pumping action produces low-shear output formetallic or waterborne paint circulation
• Stainless steel and carbon steel models available to handle various fluids
• Small displacement rod reduces sealing area to minimize throat leakage
Typical Applications• Automotive paint circulation
• High volume paint transfer
Typical Fluids Handled• Waterborne paints
• Solventborne paints
• Stains, enamels and lacquers
Energy efficient Viscount II motor reduces energy costs
PlasmaCoat™ displacement rodfor extended throat seal life
On-line throat seal replacement
Straight (BSPP) or tapered(npt) thread configurationavailable
Smooth profile piston foreasy flushing and quickcolor change capability
Viscount II 600243751
Viscount® II 300, 400, 600Hydraulic Large Volume, High-Flo® Plus 4-Ball Piston Pumps
59
1
LOW PRESSURE PUMPS ❚ F IN I SH ING EQU IPMENT
Technical SpecificationsViscount II 300 Viscount II 400 Viscount II 600
Pump ratio 0.20:1 0.27:1 0.40:1
Maximum fluid outlet pressure 300 psi 400 psi 600 psi (21 bar, 2.1 MPa) (28 bar, 2.8 MPa) (41 bar, 4.1 MPa)
Maximum hydraulic input pressure 1500 psi 1500 psi 1500 psi(103 bar, 10.3 MPa) (103 bar, 10.3 MPa) (103 bar, 10.3 MPa)
Oil flow @ 60 cpm 12 gpm (45 lpm) 12 gpm (45 lpm) 12 gpm (45 lpm)
Fluid flow @ 60 cpm 63 gpm (239 lpm) 47 gpm (179 lpm) 31 gpm (119 lpm)
Volume per cycle 1.0 gal (4.0 l) 0.8 gal (3.0 l) 0.5 gal (2.0 l)
Sound pressure level @1500 psi oil @ 20 cpm 78 dBA 78 dBA 78 dBA
Hydraulic motor inlet 3/4 npt(f) 3/4 npt(f) 3/4 npt(f)
Hydraulic motor outlet 1 npt(f) 1 npt(f) 1 npt(f)
Pump fluid inlet 2 npt(f) or 2 npt(f) or 2 npt(f) or2 BSPP(f) 2 BSPP(f) 2 BSPP(f)
Pump fluid outlet 2 npt(f) or 2 npt(f) or 2 npt(f) or2 BSPP(f) 2 BSPP(f) 2 BSPP(f)
Weight 217 lb. (98 kg) 217 lb. (98 kg) 217 lb. (98 kg)
Instruction manual 309136 309136 309136
Note: Reference ordering information for further details on models available in npt and BSPP thread configurations.npt is National Pipe Taper thread.BSPP is British Standard Pipe Parallel thread for sanitary clamp installations.
Viscount II 300, 400, 600Hydraulic Large Volume, High-Flo Plus 4-Ball Piston Pumps
60
1
F IN I SH ING EQU IPMENT ❚ LOW PRESSURE PUMPS
Viscount II 300, 400, 600Hydraulic Large Volume, High-Flo Plus, 4-Ball Piston Pumps
Performance Chart for Viscount II 300 Pump
FLU
ID O
UTL
ET P
RES
SUR
E ps
i (ba
r, M
Pa)
300(21, 2.1)
250 (17, 1.7)
200(14, 1.4)
150(10, 1.0)
100 (7.0, 0.7)
50(3.5, 0.4)
0d Flow gpm (lpm) 0 8 (30) 16 (61) 24 (91) 32 (121) 40 (151) 48 (181) 56 (212)
raulic gpm (lpm) 1.6 (6) 3 (11) 4.6 (17.4) 6.0 (22.7) 7.6 (28.7) 9.2 (34.8) 10.6 (40.1)
8 15 23 30 38 46 53
CYCLES PER MINUTE
FLUID FLOWPump tested in No. 10 Wt. Oil
HYDRAULIC OIL PRESSURES
A = @ 1500 psi (103 bar, 10.3 MPa)
B = @ 1050 psi (72 bar, 7.2 MPa)
C = @ 600 psi (41 bar, 4.1 MPa)
A
B
C
Performance Chart for Viscount II 600 Pump
Dimensions
FLU
ID O
UTL
ET P
RES
SUR
E ps
i (ba
r, M
Pa)
600(41, 4.1)
500 (17, 1.7)
400(14, 1.4)
300(10, 1.0)
200 (7.0, 0.7)
100(3.5, 0.4)
0 0 8 (30) 16 (61) 24 (91) 32 (121) 40 (151) 48 (181) 56 (212)Hydraulic gpm (lpm) 3 (11) 6.2 (23) 9.2 (35) 12.4 (47) 15.4 (58) 18.6 (70) 21.6 (82)
15 31 46 62 77 93 108
CYCLES PER MINUTE
FLUID FLOWPump tested in No. 10 Wt. Oil
HYDRAULIC PRESSURES
A = @ 1500 psi (103 bar, 10.3 MPa)
B = @ 1050 psi (72 bar, 7.2 MPa)
C = @ 600 psi (41 bar, 4.1 MPa)
A
B
C
Fluid Flow
Performance Chart for Viscount II 400 Pump
FLU
ID O
UTL
ET P
RES
SUR
E ps
i (ba
r, M
Pa)
450(31, 3.1)
375 (26, 2.6)
300(21, 2.1)
225(16, 1.6)
150 (10, 1.0)
75(5.0, 0.5)
0Fluid Flow gpm (lpm) 0 8 (30) 16 (61) 24 (91) 32 (121) 40 (151) 48 (181) 56 (212)
Hydraulic gpm (lpm) 2 (8) 4.2 (15.9) 6.2 (23.4) 8.4 (31.7) 10.4 (39.3) 12.4 (46.9) 14.4 (54.4)
10 21 31 42 52 62 72
CYCLES PER MINUTE
FLUID FLOWPump tested in No. 10 Wt. Oil
HYDRAULIC OIL PRESSURES
A = @ 1500 psi (103 bar, 10.3 MPa)
B = @ 1050 psi (72 bar, 7.2 MPa)
C = @ 600 psi (41 bar, 4.1 MPa)
A
B
C
24.94 in
(633 mm)
Hydraulic
Outlet
1 npt(f)
Hydraulic Inlet
3/4 npt(f)
Pump Fluid Outlet
2 npt(f) or
2 BSPP(f)
Pump Fluid Inlet
2 npt(f) or
2 BSPP(f)
25.2 in
(641.7 mm)
8.2 in
(205 mm)
40 in
(1003 mm)
21.7 in
(551 mm)
Pump Stand 218742 not included with pump
61
1
LOW PRESSURE PUMPS ❚ F IN I SH ING EQU IPMENT
Ordering InformationPump part number includes motor and lower displacement pump
Viscount II 300 Viscount II 300 Viscount II 300 Viscount II 400 Viscount II 400 Viscount II 400Pump part number 243742 243755 243756 243741 243753 243754Thread design npt npt BSPP npt npt BSPP
Hydraulic motor/reciprocator 223646 223646 223646 223646 223646 223646
Lower displacement pump 243733 243773 243736 243732 243772 243735
Construction CS SST SST CS SST SST
Piston seal construction UHMWPE UHMWPE UHMWPE UHMWPE UHMWPE UHMWPE
Throat seal construction UHMWPE/Leather UHMWPE/Leather UHMWPE/Leather UHMWPE/Leather UHMWPE/Leather UHMWPE/Leather
Replacement Parts Ordering InformationAir motor repair kit 223654 223654 223654 223654 223654 223654
Standard piston seal kit 243729 243729 243729 243728 243728 243728
Construction UHMWPE UHMWPE UHMWPE UHMWPE UHMWPE UHMWPE
Optional piston seal kit 235854 235854 235854 235855 235855 235855
Construction PTFE PTFE PTFE PTFE PTFE PTFE
Standard throat seal kit 243671 243671 243671 243671 243671 243671
Construction UHMWPE/Leather UHMWPE/Leather UHMWPE/Leather UHMWPE/Leather UHMWPE/Leather UHMWPE/Leather
Optional throat seal kit 243672 243672 243672 243672 243672 243672
Construction PTFE/Leather PTFE/Leather PTFE/Leather PTFE/Leather PTFE/Leather PTFE/Leather
Optional throat seal kit 243673 243673 243673 243673 243673 243673
Construction UHMWPE Triple Lip UHMWPE Triple Lip UHMWPE Triple Lip UHMWPE Triple Lip UHMWPE Triple Lip UHMWPE Triple Lip
Standard displacement rod 196228 196228 196228 196228 196228 196228
Construction SST/PlasmaCoat™ SST/PlasmaCoat SST/PlasmaCoat SST/PlasmaCoat SST/PlasmaCoat SST/PlasmaCoat
Optional displacement rod 185197 185197 185197 185197 185197 185197
Construction SST/Chrome SST/Chrome SST/Chrome SST/Chrome SST/Chrome SST/Chrome
Optional displacement rod 685954 685954 685954 685954 685954 685954
Construction Ceramic Ceramic Ceramic Ceramic Ceramic Ceramic
Standard cylinder 180497 180497 180497 180498 180498 180498
Construction SST/Chrome SST/Chrome SST/Chrome SST/Chrome SST/Chrome SST/Chrome
Optional cylinder 686522 686522 686522 N/A N/A N/A
Construction Ceramic Ceramic Ceramic
Viscount II 300, 400, 600Hydraulic Large Volume, High-Flo Plus 4-Ball Piston Pumps
62
1
F IN I SH ING EQU IPMENT ❚ LOW PRESSURE PUMPS
Viscount II 300, 400, 600Hydraulic Large Volume, High-Flo Plus 4-Ball Piston Pumps
Ordering Information, continued Pump part number includes motor and lower displacement pump
Viscount II 600 Viscount II 600 Viscount II 600Pump part number 243740 243751 243752Thread design npt npt BSPP
Hydraulic motor/reciprocator 223646 223646 223646
Lower displacement pump 243731 243771 243734
Construction CS SST SST
Piston seal construction UHMWPE UHMWPE UHMWPE
Throat seal construction UHMWPE/Leather UHMWPE/Leather UHMWPE/Leather
Replacement Parts Ordering InformationAir motor repair kit 223654 223654 223654
Standard piston seal kit 243727 243727 243727
Construction UHMWPE UHMWPE UHMWPE
Optional piston seal kit 235856 235856 235856
Construction PTFE PTFE PTFE
Standard throat seal kit 243671 243671 243671
Construction UHMWPE/Leather UHMWPE/Leather UHMWPE/Leather
Optional throat seal kit 243672 243672 243672
Construction PTFE/Leather PTFE/Leather PTFE/Leather
Optional throat seal kit 243673 243673 243673
Construction UHMWPE Triple Lip UHMWPE Triple Lip UHMWPE Triple Lip
Standard displacement rod 196228 196228 196228
Construction SST/PlasmaCoat SST/PlasmaCoat SST/PlasmaCoat
Optional displacement rod 185197 185197 185197
Construction SST/Chrome SST/Chrome SST/Chrome
Optional displacement rod 685954 685954 685954
Construction Ceramic Ceramic Ceramic
Standard cylinder 180499 180499 180499
Construction SST/Chrome SST/Chrome SST/Chrome
63
1
LOW PRESSURE PUMPS ❚ F IN I SH ING EQU IPMENT
Viscount II 300, 400, 600Hydraulic Large Volume, High-Flo Plus 4-Ball Piston Pumps
Accessories218742 Pump Floor Stand
For mounting High-Flo pump to the floor.
196321 Pump Adapter FittingUse to convert a BSPP thread High-Flo Plus pump to a nptthread, 2 in BSPP(m) x 2 in npt(f).
193424 Pump Adapter Fitting SealSeal used with pump adapter fitting (196321).
169236 Hydraulic Fluid5 gal (18.9 l) size.
237744 Intake Valve Seat, with Internal Pressure Relief Valve
180529 Intake Valve Seat, without Relief Valve
243948 Coupling Kit with Displacement Rod, PlasmaCoatIncludes coupling collars, coupling nut and 196228SST/PlasmaCoat displacement rod.
222649 Coupling Kit with Displacement Rod, ChromeIncludes coupling collars, coupling nut and 185197SST/Chrome displacement rod.
220385 Seat Puller KitTool to make removal of the seats from the manifolds easier.
High-Flo Plus Throat Conversion KitsConverts High-Flo pump designs to a throat cartridge.
243667 Cartridge Wet CupIncludes wet cup only.
243763 Throat Cartridge Kit Includes wet cup and UHMWPE/Leather throat packing kit.
243764 Throat Cartridge KitIncludes wet cup and PTFE/Leather throat packing kit.
243765 Throat Cartridge KitIncludes wet cup and UHMWPE Triple Lip™ throat kit.
High-Flo Plus Piston Conversion KitsConverts High-Flo pump designs to the new High-Flo Plus pistonplates and piston seal.
243707 High-Flo Plus 300Includes High-Flo Plus piston, jam nut, o-rings and piston seal kit. For Viscount II 300 pumps.
243706 High-Flo Plus 400Includes High-Flo Plus piston, jam nut, o-rings and piston seal kit. For Viscount II 400 pumps.
243705 High-Flo Plus 600Includes High-Flo Plus piston, jam nut, o-rings and piston seal kit. For Viscount II 600 pumps.
Hydraulic Shutoff Valves512150 Maximum working pressure: 2000 psi
(13.8 MPa, 138 bar). 1/2 npt (fbe).
102644 Maximum working pressure: 3000 psi(20.7 MPa, 207 bar). 3/4 npt (fbe).
102646 Maximum working pressure: 3000 psi(20.7 MPa, 207 bar). 1 npt (fbe).
64
1
F IN I SH ING EQU IPMENT ❚ LOW PRESSURE PUMPS
Features and Benefits• Extremely reliable, low maintenance pump, ideal for 24-hours-
per-day circulating systems
• No fluid packings or check valve parts to maintain
• Six to fifteen stage pumps available, with a wide offering of electrical motors
• Flexible drive coupling with built-in thrust bearing eliminates the need for a special thrust motor and provides positive shaft alignment
Typical ApplicationsLarge volume paint circulation for:
• Automotive assembly plants
• Automotive component plants
Typical Fluids Handled• Waterborne paints
• Solventborne paints
Explosion-proof electric motorfor paint mix room installa-tions
Steady uniform pressure andnon-pulsating smooth delivery
Reliable pump for high vol-ume, worry-free paint circu-lation
Imperial Pump224110
Imperial™
Electric Centrifugal Pumps
65
1
LOW PRESSURE PUMPS ❚ F IN I SH ING EQU IPMENT
Imperial Electric Centrifugal Pumps
Technical SpecificationsMaximum fluid outlet pressure . . . . . 250 psi (1.7 MPa, 17 bar)
Power supply . . . . . . . . . . . . . 220/460 Volt, AC, 3 phase, 60 Hz
CSA 575V, AC, 3 phase, 60 Hz
380 Volt, AC, 3 phase 50 Hz
Maximum fluid flow* . . . . . . . . . . . . . . . . . . . . 50 gpm (189 lpm)
Maximum tank heightStandard pump . . . . . . . . . . . . . . . . . . . . . . . 60 in (152.2 cm)
High profile pump . . . . . . . . . . . . . . . . . . . . . 85 in (215.7 cm)
Pump fluid inlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 npt(f)
Pump fluid outlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 npt(f)
WeightFrom 6 to 15 stages . . . . . . . . . . . . . 205-235 lb. (92-106 kg)
Instruction manualsFree standing pumps . . . . . . . . . . . . . . . . . . . . . . . . . . . 308059Standpipe mounted pumps . . . . . . . . . . . . . . . . . . . . . 308060
*Flow rate is dependent on specific gravity of fluid and number of pump stages.
StandpipeModel61.12 in(1.55 m)Free Standing
Standard Model66 in (1.6 m)
Free Standing High Profile Model
91.5 in (2.3 m)
14.68 in(373 mm)
Fluid Outlet2 npt(f)
Motor not includedwith pump
Dimensions
6.0 in(152 mm)
Fluid Inlet2 npt(f)
66
1
F IN I SH ING EQU IPMENT ❚ LOW PRESSURE PUMPS
Imperial Electric Centrifugal Pumps
U-Frame MotorsEfficiency Compliance
Part No. HP RPM Voltage Frame Rating Key*
521470 3 3600 230/460 184 UC, Footless Standard 2a, 3a521468 7.5 3600 230/460 215 UC, Footless Standard 2a, 3a521467 10 3600 230/460 254 UC, Footless Standard 2a, 3a521466 15 3600 230/460 256 UC, Footless Standard 2a, 3a521888 20 3600 230/460 286 UC, Footless Standard 2a, 3a
521455 7.5 3600 600 215 UC, Footless Standard 2a, 3a
51A649 3 3600 CSA 575 184 UC, Footless Standard 2a, 3a51A650 5 3600 CSA 575 213 UC, Footless Standard 2a, 3a51A651 7.5 3600 CSA 575 215 UC, Footless Standard 2a, 3a51A652 10 3600 CSA 575 254 UC, Footless Standard 2a, 3a51A653 15 3600 CSA 575 256 UC, Footless Standard 2a, 3a51A654 20 3600 CSA 575 286 UC, Footless Standard 2a, 3a
516821 3 3600 230/460 184 UC, Footless Premium 1a, 2b, 3b516732 5 3600 230/460 213 UC, Footless Premium 1a, 2b, 3b516824 7.5 3600 230/460 215 UC, Footless Premium 1a, 2b, 3b516825 10 3600 230/460 254 UC, Footless Premium 1a, 2b, 3b516731 15 3600 230/460 256 UC, Footless Premium 1a, 2b, 3b51B297 3 3600 CSA 575 184 UC, Footless Premium 1a, 2b, 3b51B299 7.5 3600 CSA 575 215 UC, Footless Premium 1a, 2b, 3b51B300 10 3600 CSA 575 254 UC, Footless Premium 1a, 2b, 3b51B301 15 3600 CSA 575 256 UC, Footless Premium 1a, 2b, 3b51B302 20 3600 CSA 575 286 UC, Footless Premium 1a, 2b, 3b
114937 10 3600 CSA575 254 UC, Footless Inverter Duty 1a, 2b, 3b51B157 15 3600 230/460 256 UC, Footless Inverter Duty 1a, 2b, 3b51B778 10 3600 230/460 254 UC, Footless Inverter Duty 1a, 2b, 3b116228 10 3600 380V/50Hz 254 UC, Footless Inverter Duty 1a, 2b, 3b
T-Frame MotorsEfficiency Compliance
Part No. HP RPM Voltage Frame Rating Key*
521441 3 3600 230/460 182 TC, Footless Standard n/a521429 5 3600 230/460 184 TC, Footless Standard n/a51B296 7.5 3600 230/460 213 TC, Footless Standard n/a516826 10 3600 230/460 215 TC, Footless Standard n/a521456 15 3600 230/460 254 TC, Footless Standard n/a521454 20 3600 230/460 256 TC, Footless Standard n/a
516822 3 3600 230/460 182 TC, Footless Premium 1b516823 5 3600 230/460 184 TC, Footless Premium 1b516774 7.5 3600 230/460 213 TC, Footless Premium 1b516775 10 3600 230/460 215 TC, Footless Premium 1b516776 15 3600 230/460 254 TC, Footless Premium 1b516828 20 3600 230/460 256 TC, Footless Premium 1b
Ordering InformationGeneral Specifications: Class 1, group D, Division 1 ExplosionProof, Temp. Code T2B, Class F Insulation, Vertical
Adapter kit, 213049, required for 75 HP motors
*Compliance Key Company and Specification1a Ford Motor EM-1 Premium Efficiency U Frame Motor1b Ford Motor EM-1 Premium Efficiency T Frame Motor2a General Motors 7EQ Standard Efficiency U Frame Motor2b General Motors 7EHQ Premium Efficiency U Frame Motor3a Chrysler NPEM-100 Standard Efficiency U Frame Motor3b Chrysler NPEM-105 Premium Efficiency U Frame Motor
67
1
LOW PRESSURE PUMPS ❚ F IN I SH ING EQU IPMENT
Imperial Electric Centrifugal Pumps
Accessories218631 Pump Mounting Stand, Standard
Use to mount a standard height, free standing Imperialpump to the floor.
220266 Pump Mounting Stand, High ProfileUse to mount a high profile height, free standing Imperialpump to the floor.
207727 Shaft Holding Tool, High ProfileUse to service pump shaft on high profile height pumps.
218634 Shaft Holding Tool, StandardUse to service pump shaft on standard height pumps.
178779 Shaft Adjusting ToolRequired for setting the proper gap on the pump coupler.
177219 Pressing ToolUse for pressing new bearings into bowls to maintainproper clearance of bearings.
177217 Checking Tool
177218 Check FixtureUse checking tool 177217 and check fixture 177218 tocheck concentricity of new bearings pressed into impellerbowls.
616637 Spanner WrenchFor holding impellers while torquing impeller nuts.
953912 Assembly StandMust be used to assemble pump in proper upright position, maintaining alignment.
213049 Adapter Kit for 10 and 15 hp MotorsRequired to adapt 10 hp and 15 hp motors to Imperialpumps. Includes adapter plate, coupling, coupling insert,screws and washers.
107411 Chevron SR1 Grease-2Required for lubricating pump. One tube is included with new pumps. 14 oz. supply.
Free Standing Pump ModelsCorrosion Resistant Waterborne Severe Duty
60 in 85 in 60 in 85 in 60 inNo. of (152 cm) (216 cm) (152 cm) (216 cm) (152 cm)Stages Tanks Tanks Tanks Tanks Tanks
Part No. Part No. Part No. Part No. Part No.
6 223906 224006 224106 224206 –
7 223907 224007 224107 224207 –
8 223908 224008 224108 224208 –
9 223909 224009 224109 224209 –
10 223910 224010 224110 224210 249103
11 223911 224011 224111 224211 249104
12 223912 224012 224112 224212 249105
13 223913 224013 224113 224213 249106
14 223914 224014 224114 224214 249107
15 – – 236615 236715 249108
Standpipe-Mounted Pump ModelsCorrosive Resistant Stainless Steel
60 in 60 inNo. of (152 cm) (152 cm)Stages Tanks Tanks
Part No. Part No.
6 223806 223706
7 223807 223707
8 223808 223708
9 223809 223709
10 223810 223710
11 223811 223711
12 223812 223712
13 223813 223713
14 223814 223714
15 – 237015
Ordering Information
68
1
F IN I SH ING EQU IPMENT ❚ LOW PRESSURE PUMPS
Notes
2
69MEDIUM PRESSURE PUMPS ❚ F IN I SH ING EQU IPMENT
Quick Reference Pump IndexMedium Pressure Pumps, 500 – 3000 psi
Fluid Flow @ Max FluidAir Pump Air Motor 60 cpm Outlet PressureMotor Ratio Diameter gpm (lpm) psi (bar, MPa)Falcon™ 10:1 2 in (5.1 cm) 0.3 (1.1) 1500 (104, 10.4)Falcon 20:1 3 in (7.6 cm) 0.3 (1.1) 2200 (152, 15.2)Monark® 15:1 3 in (7.6 cm) 0.7 (2.6) 1500 (104, 10.4)Monark 23:1 3 in (7.6 cm) 0.4 (1.6) 2760 (190, 19)President® 10:1 4.25 in (10.8 cm) 3.0 (11.3) 1800 (124, 12.4)President 15:1 4.25 in (10.8 cm) 1.8 (6.8) 1800 (124, 12.4)President 30:1 4.25 in (10.8 cm) 1.0 (3.8) 3600 (250, 25)Merkur™ 15:1 4.3 in (11.0 cm) 1.6 (6.0) 1500 (103, 10.3)Merkur 20:1 4.3 in (11.0 cm) 1.1 (4.2) 2000 (140, 14.0)Merkur 30:1 4.3 in (11.0 cm) 0.6 (2.4) 3000 (210, 21.0)Orion™ 15:1 6.3 in (16.0 cm) 2.7 (102) 1740 (120, 12.0)Orion 28:1 6.3 in (16.0 cm) 1.6 (6.0) 3250 (224, 22.4)Senator® 13:1 5.5 in (13.9 cm) 4.6 (17.3) 1300 (90, 9.0)Senator 17:1 5.5 in (13.9 cm) 3.4 (13) 1700 (117, 11.7)Senator 25:1 5.5 in (13.9 cm) 2.3 (8.7) 2500 (172, 17.2)Bulldog® 10:1 7 in (17.8 cm) 12 (46) 1000 (69, 6.9)Bulldog 14:1 7 in (17.8 cm) 6.8 (25.9) 1400 (97, 9.7)Bulldog 21:1 7 in (17.8 cm) 4.6 (17.3) 2100 (145, 14.5)Bulldog 24:1 7 in (17.8 cm) 4 (15.1) 2400 (165, 16.5)Bulldog 28:1 7 in (17.8 cm) 3.4 (13) 2800 (193, 19.3)Glutton® 12:1 7.25 in (18.4 cm) 2.0 (7.5) 1200 (82, 8.2)Glutton 25:1 7.25 in (18.4 cm) 0.9 (3.4) 2500 (170, 17)
Fluid Flow @ Max FluidHydraulic Pump 60 cpm Outlet PressureMotor Ratio gpm (lpm) psi (bar, MPa)Viscount® I 1:1 3 (11.3) 1000 (69, 6.9)Viscount I 3:1 1 (3.8) 3000 (207, 20.7)Viscount II .67:1 15 (56.7) 1000 (69, 6.9)Viscount II 1.33:1 9.2 (34.7) 2000 (138, 13.8)Viscount II 1.73:1 6.8 (25.9) 2600 (179, 17.9)
2
70 F IN I SH ING EQU IPMENT ❚ MEDIUM PRESSURE PUMPS
Features and Benefits• Lower displacement pump delivers minimal pulsation
for high finish quality
• Compact lower displacement pump flushes material quickly and easily, reducing material costs
• Positive displacement, 2-ball piston design provides uniform and easily controlled delivery
• Stainless steel wetted parts to handle wide range of fluids
Typical Applications• Air-assisted wood finishing supply pump
• Air-assisted general metal finishing supply pump
• Wood furniture and cabinetry finishing applications
• General metal finishing applications
Typical Fluids Handled• Catalyzed lacquers
• Polyurethanes
• Waterborne lacquers
• Primers, stains
Falcon 10:1 241594
Reliable Falcon
air motor
Quick-flush stainless
steel pump
Low pulsation
pump delivery
Falcon™ 10:1 and 20:1Pneumatic 2-Ball Piston Pumps
2
71MEDIUM PRESSURE PUMPS ❚ F IN I SH ING EQU IPMENT
Falcon 10:1 and 20:1Pneumatic 2-Ball Piston Pumps
Technical SpecificationsFalcon Falcon
Pump ratio 10:1 20:1
Maximum fluid outlet pressure 1500 psi 2200 psi
(104 bar, 10.4 MPa) (152 bar, 15.2 MPa)
Maximum air input pressure 150 psi 100 psi
(10 bar, 1.0 MPa) (7 bar, 0.7 MPa)
Fluid flow @ 60 cpm 0.3 gpm (1.1 lpm) 0.3 gpm (1.1 lpm)
Volume per cycle 0.64 oz (19 cc) 0.64 oz (19 cc)
Air consumption @100 psi air @ 20 cpm 0.75 scfm (0.02 m3/min) 0.75 scfm (0.02 m3/min)
Sound pressure level @100 psi 69 dBA 73 dBA
air @ 20 cpm
Air motor inlet 3/8 npsm(f) 3/8 npsm(f)
Pump fluid inlet 3/8 npt(f) 3/8 npt(f)
Pump fluid outlet 1/4 npt(f) 1/4 npt(f)
Weight 20 lb. (9 kg) 20 lb. (9 kg)
Instruction manual 308996 308996
9092B
8.23 in(209 mm)
20.2 in(513 mm)
11.97 in(304 mm)
6.25 in(159 mm)
Dimensions for Falcon 10:1 and 20:1 PumpsAir motor inlet3/8 npsm(f)
Fluid outlet1/4 npt(f)
Fluid inlet3/8 npt(f)
2
72 F IN I SH ING EQU IPMENT ❚ MEDIUM PRESSURE PUMPS
Falcon 10:1 and 20:1Pneumatic 2-Ball Piston Pumps
Ordering Information1. Select appropriate pump ratio (10:1 or 20:1) based on pressure and flow requirements of the application. Refer to
Falcon 10:1 and Falcon 20:1 pump performance charts.
2. Order pump part number.Pump part number includes motor and lower displacement pump
Falcon 10:1 Falcon 20:1
Pump part number 241594 241595
Air motor 241504 241505
Lower displacement pump 241516 241516
Construction SST SST
Piston seal construction PTFE PTFE
Throat seal construction UHMWPE UHMWPE
Replacement Parts Ordering InformationAir motor packing repair kit 241833 241834
Air motor spool valve repair kit 241884 241884
Standard piston seal kit 241830 241830
Construction PTFE PTFE
Optional piston seal 115408 115408
Construction UHMWPE UHMWPE
Standard throat seal kit 241827 241827
Construction UHMWPE UHMWPE
Displacement rod 194756 194756
Construction SST SST
Cylinder 194760 194760
Construction SST SST
Performance Chart for Falcon 10:1 Pump
Performance Chart for Falcon 20:1 Pump
FLU
ID O
UTL
ET P
RES
SUR
E ps
i (ba
r, M
Pa)
AIR
CO
NSU
MPT
ION
scf
m (
m3 /m
in)
1000 (69, 6.9)
750 (52, 5.2)
500 (34, 3.4)
250(17, 1.7)
0
10(0.3)
7.5(0.2)
5.0(0.1)
2.5(0.07)
0
A
B
C
gpm 0 0.1 0.2 0.3 0.4 0.5(lpm) (0.4) (0.8) (1.1) (1.5) (1.9)
20 40 60 80 100
CYCLES PER MINUTE
FLUID FLOW(Pump tested in No. 10 Wt. Oil)
AIR PRESSURES LEGEND
A = @ 100 psi (7.0 bar, 0.7 MPa) Air Consumption
B = @ 70 psi (4.8 bar, 0.5 MPa) Fluid Flow
C = @ 40 psi (2.8 bar, 0.3 MPa)
CB
A
FLU
ID O
UTL
ET P
RES
SUR
E ps
i (ba
r, M
Pa)
AIR
CO
NSU
MPT
ION
scf
m (
m3 /m
in)
2400 (166, 16.6)
1800 (124, 12.4)
1200 (83, 8.3)
600(41, 4.1)
0
10(0.3)
7.5(0.2)
5.0(0.1)
2.5(0.07)
0
A
B
C
gpm 0 0.1 0.2 0.3 0.4 0.5(lpm) (0.4) (0.8) (1.1) (1.5) (1.9)
20 40 60 80 100
CYCLES PER MINUTE
FLUID FLOW(Pump tested in No. 10 Wt. Oil)
AIR PRESSURES LEGEND
A = @ 100 psi (7.0 bar, 0.7 MPa) Air Consumption
B = @ 70 psi (4.8 bar, 0.5 MPa) Fluid Flow
C = @ 40 psi (2.8 bar, 0.3 MPa)
C
B
A
2
73MEDIUM PRESSURE PUMPS ❚ F IN I SH ING EQU IPMENT
AccessoriesAdditional Pump Kits
241597 Throat/Piston Repair KitFor both throat seal and piston seal replacement. Includesa UHMWPE throat seal, PTFE piston seal, piston ball andintake ball.
241828 PTFE Piston Repair KitFor replacing piston wear parts. Includes piston ball, PTFEpiston seal and piston valve.
241829 Intake Repair KitFor replacing intake valve wear parts. Includes intake ball,ball stop and intake valve.
241644 HVLP Verification KitFor use in checking air cap air pressures at varioussupply air pressures. NOT to be used for actualspraying. Note: to be compliant, the atomizing airpressure must not exceed 10 psi (70 MPa, 0.7 bar).
238563 Gun Inlet Fluid Filter KitPackage of 3. 60 mesh (0.009 gap spacing) to replace the standard 100 mesh (0.005 gap) filter forcoarser filtering.
241804 Tip Filter KitPackage of 10. 150 mesh. Comes standard with tip sizes0.007 in, 0.009 in and 0.011 in Fits other tip sizes butordered separately.
243340 Pail Cover with AgitatorUse to agitate in a 5 gal (18.9 l) pail. Agitator mounted onstainless steel pail cover. Pail cover includes an accesshole for suction hose.
243594 Wall Bracket, FalconTo mount a Falcon pump to a wall.
243606 2-Wheel Cart, ChromeUsed to mount a Falcon pump to a 2-wheel cart.Mounting hardware included.
241646 4-Wheel CartUse to mount a Falcon pump to a 4-wheel cart. Cartdesigned to support 5 gal (18.9 l) pail. Mounting hardware included.
245085 Suction Hose, Stainless, DrumUse to siphon material out of 55 gal (200 l) drum.Includes 6 ft (1.8 m) hose, stainless siphon tube, acetalbung adapter and stainless inlet strainer. Hose outlet fit-ting: 3/8 JIC(f) (9/16 - 18 UNF). Order nipple 112100(3/8 JIC x 3/8 npt) to connect hose to pump inlet.
245083 Suction Hose, Stainless, PailUse to siphon material out of a 5 gal (18.9 l) pail.Includes 4 ft (1.2 m) hose, stainless siphon tube andstainless inlet strainer. Hose outlet fitting: 3/8 JIC(f) (9/16 - 18 UNF). Order nipple 112100 (3/8 JIC x 3/8 npt) to connect hose to pump inlet.
Falcon 10:1 and 20:1Pneumatic 2-Ball Piston Pumps
2
74 F IN I SH ING EQU IPMENT ❚ MEDIUM PRESSURE PUMPS
Features and Benefits• Reliable Monark air motor provides low maintenance
operation
• Stubby length models for convenient wall mounting
• Ultra High Molecular Weight Polyethylene (UHMWPE)packings for extended pump life in abrasive fluids
• Positive displacement, 2-ball piston design, provides uniform and easily controlled delivery
Typical Applications• Air-assisted or airless supply pump
• Wood furniture, cabinets, and other wood products
• Commercial, military and civilian aircraft
• Farm and construction equipment
• General metal finishing
Typical Fluids Handled• Solventborne and waterborne fluids
• High solids, plural component coatings
• Stains, lacquers and varnishes
• Sealants and low viscosity adhesives
• Acid-catalyzed wood finishing materials
Monark 15:1223844
Reliable Monark
air motor
Proven and durable
2-ball piston pump
Monark® 15:1 and 23:1Pneumatic 2-Ball Piston Pumps
2
75MEDIUM PRESSURE PUMPS ❚ F IN I SH ING EQU IPMENT
Monark 15:1 and 23:1Pneumatic 2-Ball Piston Pumps
Technical SpecificationsMonark Monark
Pump ratio 15:1 23:1
Maximum fluid outlet pressure 2700 psi (Carbon steel) 3450 psi (Carbon steel)
(186 bar, 18.6 MPa) (238 bar, 23.8 MPa)
1500 psi (Stainless steel) 2760 psi (Stainless steel)
(104 bar, 10.4 MPa) (190 bar, 19.0 MPa)
Maximum air input pressure 180 psi (Carbon steel) 150 psi (Carbon steel)
(12 bar, 1.2 MPa) (10 bar, 1.0 MPa)
100 psi (Stainless steel) 120 psi (Stainless steel)
(7 bar, 0.7 MPa) (8 bar, 0.8 MPa)
Fluid flow @ 60 cpm 0.7 gpm (2.6 lpm) 0.4 gpm (1.6 lpm)
Volume per cycle 1.5 oz (44 cc) 0.9 oz (27 cc)
Air consumption @ 100 psi air @ 20 cpm 3 scfm (0.08 m3/min) 3 scfm (0.08 m3/min)
Sound pressure level @ 100 psi air @ 20 cpm 75 dBA 75 dBA
Air motor inlet 3/8 npt(f) 3/8 npt(f)
Pump fluid inlet 3/4 npt(m) 3/4 npt(m)
Pump fluid outlet 3/8 npt(f) 3/8 npt(f)
Weight 24 lb. (11 kg) 24 lb. (11 kg)
Instruction manual 308106 (Carbon steel) 307619
306981 (Stainless steel)
2
76 F IN I SH ING EQU IPMENT ❚ MEDIUM PRESSURE PUMPS
28.5 in(724 mm)
13.9 in(353 mm)
14.6 in(371 mm)
Dimensions for Monark 15:1 Pump
28.4 in(722 mm)
13.3 in(338 mm)
15.1 in(384 mm)
Air motor inlet3/8 npt(f)
Fluid outlet3/8 npt(f)
Fluid inlet3/4 npt(m)
Air motor inlet3/8 npt(f)
Fluid outlet3/8 npt(f)
Fluid inlet3/4 npt(m)
Monark 15:1 and 23:1Pneumatic 2-Ball Piston Pumps
Performance Chart for Monark 15:1 Pump
FLU
ID O
UTL
ET P
RES
SUR
E ps
i (ba
r, M
Pa)
AIR
CO
NSU
MPT
ION
scf
m (
m3 /m
in)
3000 (207, 20.7)
2500 (173, 17.3)
2000 (138, 13.8)
1500 (103, 10.3)
1000 (69, 6.9)
500 (34, 3.4)
0
60(1.7)
50(1.4)
40(1.1)
30(0.8)
20(0.6)
10(0.3)
0
A
B
D
gpm 0 0.5 1 1.5 2 2.5(lpm) (1.9) (3.8) (5.7) (7.6) (9.5)
42 84 126 168 210
CYCLES PER MINUTE
FLUID FLOW(Pump tested in No. 10 Wt. Oil)
C
D
B
A
AIR PRESSURES LEGEND
A = @ 180 psi (12 bar, 1.2 MPa) Air Consumption
B = @ 100 psi (7.0 bar, 0.7 MPa) Fluid Flow
C = @ 70 psi (4.8 bar, 0.5 MPa)
D = @ 40 psi (2.8 bar, 0.3 MPa)
C
Performance Chart for Monark 23:1 Pump
FLU
ID O
UTL
ET P
RES
SUR
E ps
i (ba
r, M
Pa)
AIR
CO
NSU
MPT
ION
scf
m(m
3 /min
)
3000 (207, 20.7)
2500 (173, 17.3)
2000 (138, 13.8)
1500 (103, 10.3)
1000 (69, 6.9)
500 (34, 3.4)
0
24(0.7)
20(0.6)
16(0.5)
12(0.4)
8(0.2)
4(0.1)
0
A
B
C
gpm 0 0.1 0.2 0.3 0.4 0.5(lpm) (0.4) (0.8) (1.1) (1.5) (1.9)
15 30 45 60 75
CYCLES PER MINUTE
FLUID FLOW(Pump tested in No. 10 Wt. Oil)
C
B
A
AIR PRESSURES LEGEND
A = @ 120 psi (8 bar, 0.8 MPa) Air Consumption
B = @ 70 psi (4.8 bar, 0.5 MPa) Fluid Flow
C = @ 40 psi (2.8 bar, 0.3 MPa)
Dimensions for Monark 23:1 Pump
2
77MEDIUM PRESSURE PUMPS ❚ F IN I SH ING EQU IPMENT
Monark 15:1 and 23:1Pneumatic 2-Ball Piston Pumps
Ordering InformationPump part number includes motor and lower displacement pump
Monark 15:1 Monark 15:1 Monark 23:1 Monark 23:1
Pump part number 239327 223844 223596 237958
Air motor 215363 215363 222791 222791
Lower displacement pump 223587 223842 223595 239145
Construction CS SST CS SST
Seal construction 3 PTFE/3 Leather 3 PTFE/3 Leather 4 Leather/1 PTFE 2 PTFE/2 Leather
Replacement Parts Ordering InformationAir motor repair kit 206728 206728 206728 206728
Standard seal repair kit 235635 235635 239328 235636
Construction 3 PTFE/3 Leather 3 PTFE/3 Leather 4 Leather/1 PTFE 2 PTFE/2 Leather
Optional seal repair kit 223675 223675 223674 223674
Construction 3 UHMWPE/3 Leather 3 UHMWPE/3 Leather 2 UHMWPE/2 Leather 2 UHMWPE/2 Leather
Optional seal repair kit 237725 237725 236724 236724
Construction 6 PTFE 6 PTFE 4 PTFE 4 PTFE
Optional seal repair kit 243687 243687 235636 239328
Construction Tuff-Stack™ Tuff-Stack 2 PTFE/2 Leather 4 Leather/1 PTFE
Optional seal packings 243621 243621 243615/243616 243615/243616
Construction Tuff-Stack Tuff-Stack Tuff-Stack Tuff-Stack
Displacement rod 223589 223589 223603 223603
Construction SST SST SST SST
Housing sleeve 178902 178902 178898 178898
Construction SST SST SST SST
Note: Tuff-Stack part numbers 243621, 243615 and 243616 sold as 12-count convenience pack.Tuff-Stack is a proprietary PTFE blend.
The following lower displacement pump is not offered incomplete Monark pump assemblies. To configure a complete Monark 15:1 or 23:1 pump with these lowers:1. Select desired lower displacement pump, based on fluid
pressure and flow requirements and seal construction.
2. Order Monark air motor 215363 for Monark 15:1 orMonark air motor 222791 for Monark 23:1.
3. Order tie rods 164722 (qty: 3), locknuts 101566 (qty: 3), cotter pin 101946 and o-ring seal 156082.
Additional Lower Displacement Pump for Monark 15:1 and Monark 23:1Lower displacement pump 243663
Material of Construction CS
Standard seal repair kit 237725
Construction 6 PTFE
Displacement rod 223589
Construction SST
Sleeve housing 178902
Construction SST
2
78 F IN I SH ING EQU IPMENT ❚ MEDIUM PRESSURE PUMPS
Monark 15:1 and 23:1Pneumatic 2-Ball Piston Pumps
Accessories207365 Wall Bracket
For mounting Monark pump to wall.
241953 Monark Muffler Retrofit KitUpgrades Monark air motor with foam attached to airmotor plates. Reduces sound level of Monark air motor.
208259 Siphon Kit, Carbon SteelUse to siphon fluid from a 55 gal (200 l) drum. Includesnylon suction hose 214961, 3/4 in ID, 6 ft (1.8 m), 3/4 npt(f) swivel outlet fitting, bung adapter.
208920 Siphon Kit, AluminumUse to siphon fluid from a 5 gal (18.9 l) pail. Includesnylon suction hose 170706, 1 in ID, 4 ft (1.2 m) long, 3/4 npt(f) swivel outlet fitting, inlet strainer.
207484 Siphon Kit, AluminumUse to siphon fluid from a 5 gal (18.9 l) pail. Includesnylon suction hose 214960, 3/4 in ID, 3.5 ft (1.1 m)long, 3/4 npt(f) swivel outlet fitting.
207579 Padded PliersFor servicing Monark air motor trip rod.
171818 Adjustment ToolA 0.145 in (3.7 mm) gauge used to ensure proper clearance between the poppets and the piston on theMonark air motor.
2
79MEDIUM PRESSURE PUMPS ❚ F IN I SH ING EQU IPMENT
Features and Benefits• Reliable President air motor provides low maintenance
operation
• Positive displacement, 2-ball piston design provides uniform and easily controlled delivery
• Stainless steel or carbon steel models available to handlevarious fluids
Typical Applications• Texture spraying
• Adhesive supply
• Cleaning
• Airless and air assisted airless spray finishing
Typical Fluids Handled• Texture materials
• Adhesives and sealants
• Polyester
• Water
• Plural component primers and top coat
• Waterborne coatings
• Acid-catalyzed materials
• High solids coatingsPresident 30:1
223586
Reliable President
air motor
Proven and durable
2-ball piston pump
President® 10:1, 15:1 and 30:1Pneumatic 2-Ball Piston Pumps
2
80 F IN I SH ING EQU IPMENT ❚ MEDIUM PRESSURE PUMPS
President 10:1, 15:1 and 30:1Pneumatic 2-Ball Piston Pumps
Technical SpecificationsPresident President President
Pump ratio 10:1 15:1 30:1
Maximum fluid outlet pressure 1800 psi 1800 psi 3600 psi
(124 bar, 12.4 MPa) (124 bar, 12.4 MPa) (250 bar, 25.0 MPa)
Maximum air input pressure 180 psi 120 psi 120 psi
(12 bar, 1.2 MPa) (8 bar, 0.8 MPa) (8 bar, 0.8 MPa)
Fluid flow @ 60 cpm 3 gpm (11.3 lpm) 1.8 gpm (6.8 lpm) 1.0 gpm (3.8 lpm)
Volume per cycle 6 oz (189 cc) 4 oz (112 cc) 2 oz (62 cc)
Air consumption @ 100 psi 10 scfm (0.28 m3/min) 10 scfm (0.28 m3/min) 10 scfm (0.28 m3/min)
air @ 20 cpm
Sound pressure level @ 100 psi 81 dBA 81 dBA 81 dBA
air @ 20 cpm
Air motor inlet 3/8 npsm(f) (SST drum length) 1/2 npt(f) 3/8 npt(f) (316SST model)
1/2 npt(f) (all other models) 1/2 npt(f) (All other models)
Pump fluid inlet 3/4 npt(f) (Stubby lengths) 3/4 npt(m) 3/4 npt(f) (316SST model)
no intake threads (Drum lengths) 3/4 npt(m) (All other models)
Pump fluid outlet 3/4 npt(f) 1/2 npt(f) 1/4 npt(f) (316SST model)
(Models 239326, 224347, 224348) 3/8 npt(f) (All other models)
1/2 npt(f) (Models 224342, 224348)
Weight 43 lb. (20 kg) (Stubby lengths) 31 lb. (14 kg) 31 lb. (14 kg) (Drum length)
31 lb. (14 kg) (Drum lengths) 24 lb. (11 kg) (All other models)
Instruction manual 308116 (Model 224342) 306936 306769 (316SST model)
308117 (Models 224346, 224347) 308106 (304SST model)
308118 (Stainless drum length) 306981 (Carbon steel models)
308738 (Carbon steel drum length)
Dimensions
A
B
Fluid outletE
Air MotorInletD
C
Model A B C D E FPresident 10:1 Stubby 14.63 in 13.75 in 28.38 in 1/2 npt(f) 1/2 npt(f) 3/4 npt(f)
(372 mm) (349 mm) (721 mm)President 10:1 Drum 14.63 in 42.68 in 57.31 in 1/2 npt(f) or 3/4 npt(f) or N/A
(372 mm) (1084 mm) (1456 mm) 3/8 npsm(f) 1/2 npt(f)President 15:1 14.75 in 17.0 in 31.75 in 1/2 npt(f) 1/2 npt(f) 3/4 npt(m)
(375 mm) (432 mm) (807 mm)President 30:1 Stubby 15.0 in 15.0 in 30.0 in 3/8 npt(f) or 1/4 npt(f) or 3/4 npt(f) or
(381 mm) (381 mm) (762 mm) 1/2 npt(f) 3/8 npt(f) 3/4 npt(m)President 30:1 Drum 15.0 in 32.0 in 47.0 in 1/2 npt(f) 3/8 npt(f) 3/4 npt(m)
(381 mm) (810 mm) (1194 mm)
Fluid inletF
2
81MEDIUM PRESSURE PUMPS ❚ F IN I SH ING EQU IPMENT
President 10:1, 15:1 and 30:1Pneumatic 2-Ball Piston Pumps
Performance Chart forPresident 10:1 Pump
FLU
ID O
UTL
ET P
RES
SUR
E ps
i (ba
r, M
Pa)
AIR
CO
NSU
MPT
ION
scf
m(m
3 /min
)
1800 (125, 12.5)
1500 (103, 10.3)
1200 (83, 8.3)
900 (62, 6.2)
600(41, 4.1)
300(21, 2.1)
0
90(2.5)
60(1.7)
75(2.1)
45(1.3)
30(0.8)
15(0.4)
0
A
B
C
D
gpm 0 1 2 3 4 5(lpm) (3.8) (7.6) (11.4) (15.1) (18.9)
20 40 60 80 100
CYCLES PER MINUTE
FLUID FLOW(Pump tested in No. 10 Wt. Oil)
C
D
B
A
AIR PRESSURES LEGEND
A = @ 180 psi (12 bar, 1.2 MPa) Air Consumption
B = @ 100 psi (7.0 bar, 0.7 MPa) Fluid Flow
C = @ 70 psi (4.8 bar, 0.5 MPa)
D = @ 40 psi (2.8 bar, 0.3 MPa)
Performance Chart forPresident 30:1 Pump
FLU
ID O
UTL
ET P
RES
SUR
E ps
i (ba
r, M
Pa)
AIR
CO
NSU
MPT
ION
scf
m(m
3 /min
)
4000 (276, 27.6)
3000 (207, 20.7)
2000 (138, 13.8)
1000 (69, 6.9)
0
80(2.3)
60(1.7)
40(1.1)
20(0.6)
0
A
B
C
D
gpm 0 0.5 1 1.5 2(lpm) (1.9) (3.8) (5.7) (7.6)
30 60 90 120
CYCLES PER MINUTE
FLUID FLOW(Pump tested in No. 10 Wt. Oil)
C
D
B
A
AIR PRESSURES LEGEND
A = @ 120 psi (8.3 bar, 0.83 MPa) Air Consumption
B = @ 100 psi (7.0 bar, 0.7 MPa) Fluid Flow
C = @ 70 psi (4.8 bar, 0.5 MPa)
D = @ 40 psi (2.8 bar, 0.3 MPa)
Performance Chart for President 15:1 Pump
FLU
ID O
UTL
ET P
RES
SUR
E ps
i (ba
r, M
Pa)
AIR
CO
NSU
MPT
ION
scf
m(m
3 /min
)
1500 (103, 10.3)
1250(86, 8.6)
1000 (69, 6.9)
750 (52, 5.2)
500(34, 3.4)
250(17, 1.7)
0
60(1.7)
40(1.1)
50(1.4)
30(0.8)
20(0.6)
10 (0.3)
0gpm 0 0.5 1 1.5 2(lpm) (1.9) (3.8) (5.7) (7.6)
18 35 51 66
CYCLES PER MINUTE
FLUID FLOW(Pump tested in No. 10 Wt. Oil)
C
B
A
AIR PRESSURES LEGEND
A = @ 180 psi (12 bar, 1.2 MPa) Air Consumption
B = @ 100 psi (7.0 bar, 0.7 MPa) Fluid Flow
C = @ 70 psi (4.8 bar, 0.5 MPa)
D = @ 40 psi (2.8 bar, 0.3 MPa)
A
B
C
2
82 F IN I SH ING EQU IPMENT ❚ MEDIUM PRESSURE PUMPS
President 30:1 President 30:1 President 30:1 President 30:1 President 30:1
Pump part number 221075 223586 243664 206897 223843Configuration Drum Stubby Stubby Stubby StubbyAir motor 207352 207352 207352 205038 207352
Lower displacement pump 223587 223587 243663 206184 223842
Construction CS CS CS 316 SST 304 SST
Seal construction PTFE/Leather PTFE/Leather Tuff-Stack PTFE PTFE/Leather
Replacement Parts Ordering InformationAir motor repair kit 207385 207385 207385 207385 207385
Standard seal repair kit 235635 235635 243687 N/A 235635
Construction PTFE/Leather PTFE/Leather Tuff-Stack PTFE/Leather
Optional seal repair kit 223675 223675 223675 N/A 223675
Construction UHMWPE/Leather UHMWPE/Leather UHMWPE/Leather UHMWPE/Leather
Optional seal repair kit 237725 237725 235635 N/A 237725
Construction PTFE PTFE PTFE/Leather PTFE
Optional seal repair kit 243687 243687 237725 243621 243687
Construction Tuff-Stack Tuff-Stack PTFE Tuff-Stack Tuff-Stack
Displacement rod 223589 223589 223589 165609 223589
Construction 17-4PH SST 17-4PH SST 17-4PH SST 316 SST 17-4PH SST
Housing sleeve 178902 178902 178902 178902 178902
Construction 304 SST 304 SST 304 SST 304 SST 304 SST
Note: Tuff-Stack part number 243621 sold as 12-count convenience pack.
President 10:1, 15:1 and 30:1Pneumatic 2-Ball Piston Pumps
Ordering InformationPump part number includes motor and lower displacement pump
President 10:1 President 10:1 President 10:1 President 10:1 President 10:1 President 15:1Pump part number 239326 224342 224346 224347 224348 217580Configuration Drum Stubby Stubby Stubby w/ Riser Tube Drum StubbyAir motor 207352 207352 207352 207352 207352 207352
Lower displacement pump 220465 224341 224344 224344 224349 217529
Construction CS SST SST SST SST CS
Seal construction PTFE UHMWPE/PTFE UHMWPE/Neoprene UHMWPE/Neoprene UHMWPE/PTFE PTFE/Leather
Replacement Parts Ordering InformationAir motor repair kit 207385 207385 207385 207385 207385 207385
Standard seal repair kit 208520 224401 224402 224402 224403 235634
Construction PTFE UHMWPE/PTFE UHMWPE/Neoprene UHMWPE/Neoprene UHMWPE/PTFE PTFE/Leather
Optional seal repair kit N/A 224889 224404 224404 224889 220396
Construction PTFE UHMWPE/PTFE UHMWPE/PTFE PTFE UHMWPE/Leather
Optional throat seal packings 243622 243622 243624 243624 243622 243620
Construction Tuff-Stack™ Tuff-Stack Tuff-Stack Tuff-Stack Tuff-Stack Tuff-Stack
Optional piston seal packings 243623 243623 243623/243625 243623/243625 243623 243620
Construction Tuff-Stack Tuff-Stack Tuff-Stack Tuff-Stack Tuff-Stack Tuff-Stack
Displacement rod 169504 186997 186997 186997 186997 178895
Construction SST SST SST SST SST SST
Cylinder 186986 186994 186994 186994 186986 N/A
Housing sleeve N/A N/A N/A N/A N/A 178896
Construction SST SST SST SST SST SST
Note: Tuff-Stack part numbers 243620, 243622, 243623, 243624 and 243625 sold as 12-count convenience pack.
2
83MEDIUM PRESSURE PUMPS ❚ F IN I SH ING EQU IPMENT
President 10:1, 15:1 and 30:1Pneumatic 2-Ball Piston Pumps
Accessories 207365 Wall Bracket
For mounting a President pump to a wall.
205700 Pump Floor StandFor mounting a President pump in a suction feed system.
168085 Accessory Assembly ToolUse to install piston assembly into cylinder (model 239326).
207484 Siphon Kit, AluminumUse to siphon fluid from a 5 gal (18.9 l) pail. Includes nylonsuction hose 214960, 3/4 in ID, 3.5 ft (1.1 m) long, 3/4 npt(f) swivel outlet fitting.
208259 Siphon Kit, Carbon SteelUse to siphon fluid from a 55 gal (200 l) drum. Includesnylon suction hose 214961, 3/4 in ID, 6 ft (1.8 m), 3/4 npt(f) swivel outlet fitting and bung adapter.
208920 Siphon Kit, AluminumUse to siphon fluid from a 5 gal (18.9 l) pail. Includes nylonsuction hose 170706, 1 in ID, 4 ft (1.2 m) long, 3/4 npt(f) swivel outlet fitting and inlet strainer.
206220 Wall Bracket, Model 206897For mounting a 2 tie rod President pump (model 206897) to a wall.
243801 President Remote Exhaust Muffler KitKit allows for remote exhaust piping to be installed toPresident air motor exhaust port. Redirects noise andexhaust contaminants to a remote location. Kit includes airmotor covers with 3/4 npt(f) exhaust port and cork gasket.
243421 President Muffler KitKit includes external muffler, plates and gaskets used inmuffler kit 243801. External muffler provides noise reduction to President air motor.
207579 Padded PliersFor servicing President air motor trip rod.
171818 Adjustment Tool0.145 in (3.7 mm) gauge used to ensure proper clearancebetween the poppets and the piston on the President airmotor.
2
84 F IN I SH ING EQU IPMENT ❚ MEDIUM PRESSURE PUMPS
Features and Benefits• Low pulsation output for better finish with consistent
pattern and film
• High flow rate allows for more speed and multiple gun capabilities
• All stainless steel pump construction; handles a widerange of fluids
• Extremely quiet air motor for comfortable working conditions
Typical Applications• Air-assisted wood finishing supply pump
• Air-assisted general metal finishing supply pump
• Wood furniture and cabinetry finishing applications
• General metal finishing applications
Typical Fluids Handled• Catalyzed lacquers
• Waterborne lacquers
• Shear-sensitive coatings
Merkur 20:1233819
Smooth changeover,
quiet operation
air motor
High flowrate
delivery lower pump
Low pulsation,
smooth delivery,
2-ball piston pump
Merkur™ 15:1, 20:1, 30:1 and 30:1 HFPneumatic 2-Ball Piston Pumps
2
85MEDIUM PRESSURE PUMPS ❚ F IN I SH ING EQU IPMENT
Merkur 15:1, 20:1, 30:1 and 30:1 HFPneumatic 2-Ball Piston Pumps
Technical SpecificationsMerkur Merkur Merkur Merkur
Pump ratio 15:1 20:1 30:1 30:1 HF
Maximum fluid 1500 psi 2000 psi 3000 psi 3000 psi
outlet pressure (103 bar, 10.3 MPa) (140 bar, 14.0 MPa) (210 bar, 21.0 MPa) (210 bar, 21.0 MPa)
Maximum air 115 psi 115 psi 115 psi 115 psi
input pressure (7 bar, 0.7 MPa) (7 bar, 0.7 MPa) (7 bar, 0.7 MPa) (7 bar, 0.7 MPa)
Fluid flow @ 60 cpm 1.6 gpm (6.0 lpm) 1.1 gpm (4.2 lpm) 0.6 gpm (2.4 lpm) 1.6 gpm (6.0 lpm)
Volume per cycle 3.4 oz (100 cc) 2.4 oz (70 cc) 1.4 oz (40 cc) 3.4 oz (100 cc)
Air consumption @ 100 psi 7 scfm 7 scfm 7 scfm 16 scfm
(7 bar, 0.7 MPa) @ 20 cpm (0.20 m3/min) (0.20 m3/min) (0.20 m3/min) (0.45 m3/min)
Sound level @ 100 psi 73 dBA 73 dBA 73 dBA 76 dBA
(7 bar, 0.7 MPa) @ 20 cpm
Air motor inlet 1/4 npt(m) or 1/4 npt(m) or 1/4 npt(m) or 1/4 npt(m) or
3/8 BSPP(m) 3/8 BSPP(m) 3/8 BSPP(m) 3/8 BSPP(m)
Pump fluid inlet 3/4 npt(m) or 3/4 npt(m) or 3/4 npt(m) or 3/4 npt(m) or
M26 x 1.5 (f) M26 x 1.5 (f) M26 x 1.5 (f) M26 x 1.5 (f)
Pump fluid outlet 3/8 npt(m) or 3/8 npt(m) or 3/8 npt(m) or 3/8 npt(m) or
3/8 BSPP(f) 3/8 BSPP(f) 3/8 BSPP(f) 3/8 BSPP(f)
Weight, bare pump 28 lbs (13 kg) 27 lbs (12 kg) 26 lbs (12 kg) 33 lbs (15 kg)
Instruction manual 309462 309462 309462 309462
Note: 30:1 HF is “High Flow” as it delivers 1.6 gpm (6.0 lpm) at 60 cpm.
TI1863A
TI1929A
TI1929ATI1929A
D
A
B
C
E Merkur A B C D E15:1 8.4 in 12.4 in 20.8 in 4.2 in 8.7 inBSPP (21.4 cm) (31.4 cm) (52.8 cm) (10.7 cm) (22.0 cm)20:1 8.4 in 12.4 in 20.8 in 4.2 in 8.7 inBSPP (21.4 cm) (31.4 cm) (52.8 cm) (10.7 cm) (22.0 cm)30:1 8.4 in 12.4 in 20.8 in 4.2 in 8.7 inBSPP (21.4 cm) (31.4 cm) (52.8 cm) (10.7 cm) (22.0 cm)30:1 HF 8.4 in 12.4 in 20.8 in 5.2 in 10.6 inBSPP (21.4 cm) (31.4 cm) (52.8 cm) (13.2 cm) (27.0 cm)15:1 8.4 in 13.5 in 21.9 in 4.2 in 8.7 innpt (21.4 cm) (34.2 cm) (55.6 cm) (10.7 cm) (22.0 cm)20:1 8.4 in 13.5 in 21.9 in 4.2 in 8.7 innpt (21.4 cm) (34.2 cm) (55.6 cm) (10.7 cm) (22.0 cm)30:1 8.4 in 13.5 in 21.9 in 4.2 in 8.7 innpt (21.4 cm) (34.2 cm) (55.6 cm) (10.7 cm) (22.0 cm)30:1 HF 8.4 in 13.5 in 21.9 in 5.2 in 10.6 innpt (21.4 cm) (34.2 cm) (55.6 cm) (13.2 cm) (27.0 cm)
2
86 F IN I SH ING EQU IPMENT ❚ MEDIUM PRESSURE PUMPS
FLU
ID O
UTL
ET P
RES
SUR
E ps
i (ba
r, M
Pa)
AIR
CO
NSU
MPT
ION
scf
m (
m3 /m
in)
2000 (207, 20.7)
1500 (138, 13.8)
1000 (69, 6.9)
500 (34, 3.4)
0
40(1.1)
30(0.8)
20(0.6)
10(0.3)
0gpm 0 0.5 1 1.5 2(lpm) (1.9) (3.8) (5.7) (7.6)
A
B
C
D
A
27 54 81 108
CYCLES PER MINUTE
B
C
D
FLU
ID O
UTL
ET P
RES
SUR
E ps
i (ba
r, M
Pa)
AIR
CO
NSU
MPT
ION
scf
m (
m3 /m
in)
2000 (138, 13.8)
1500 (103, 10.3)
1000 (69, 6.9)
500 (34, 3.4)
0
40(1.1)
30(0.8)
20(0.6)
10(0.3)
0gpm 0 0.5 1 1.5 2 2.5 3(lpm) (1.9) (3.8) (5.7) (7.6) (9.5) (11.4)
FLUID FLOW(Pump tested in No. 10 Wt. Oil)
D
C
B
A
B
C
D
19 38 57 76 95 113
CYCLES PER MINUTE
A
FLU
ID O
UTL
ET P
RES
SUR
E ps
i (ba
r, M
Pa)
AIR
CO
NSU
MPT
ION
scf
m (
m3 /m
in)
3000 (207, 20.7)
2000 (138, 13.8)
1000 (69, 6.9)
0
60(1.7)
40(1.1)
20(0.6)
0gpm 0 0.25 0.5 0.75 1(lpm) (0.9) (1.9) (2.8) (3.8)
FLUID FLOW(Pump tested in No. 10 Wt. Oil)
AIR PRESSURES LEGEND
A = @ 100 psi (7 bar, 70 MPa) Air Consumption
B = @ 90 psi (6.2 bar, 62 MPa) Fluid Flow
C = @ 70 psi (4.8 bar, 48 MPa)
D = @ 40 psi (2.8 bar, 28 MPa)
23 47 70 94
CYCLES PER MINUTE
A
B
C
D
B
C
A
D
FLU
ID O
UTL
ET P
RES
SUR
E ps
i (ba
r, M
Pa)
AIR
CO
NSU
MPT
ION
scf
m (
m3 /m
in)
2000 (138, 13.8)
1500 (103, 10.3)
1000 (69, 6.9)
500 (34, 3.4)
0
40(1.1)
30(0.8)
20(0.6)
10(0.3)
0gpm 0 0.5 1 1.5 2 2.5 3(lpm) (1.9) (3.8) (5.7) (7.6) (9.5) (11.4)
FLUID FLOW(Pump tested in No. 10 Wt. Oil)
D
C
B
A
B
C
D
19 38 57 76 95 113
CYCLES PER MINUTE
A
Performance Chart for Merkur 15:1
Performance Chart for Merkur 30:1 Performance Chart for Merkur 30:1 HF
Performance Chart for Merkur 20:1
Merkur 15:1, 20:1, 30:1 and 30:1 HFPneumatic 2-Ball Piston Pumps
2
87MEDIUM PRESSURE PUMPS ❚ F IN I SH ING EQU IPMENT
Merkur 15:1, 20:1, 30:1 and 30:1 HFPneumatic 2-Ball Piston Pumps
Merkur 15:1 Merkur 20:1 Merkur 30:1 Merkur 30:1 HF
Pump Part No. 233818 233752 233819 233753 233820 233754 233821 233755
Thread design npt BSPP npt BSPP npt BSPP npt BSPP
AIr motor 245354 245354 245354 245354 245354 245354 245355 245355
Lower displacement pump 245352 245352 245353 245353 245351 245351 245352 245352
construction SST SST SST SST SST SST SST SST
Piston seal UHMWPE/ UHMWPE/ UHMWPE/ UHMWPE/ UHMWPE/ UHMWPE/ UHMWPE/ UHMWPE/
construction PTFE PTFE PTFE PTFE PTFE PTFE PTFE PTFE
Throat seal UHMWPE/ UHMWPE/ UHMWPE/ UHMWPE/ UHMWPE/ UHMWPE/ UHMWPE/ UHMWPE/
construction PTFE PTFE PTFE PTFE PTFE PTFE PTFE PTFE
Replacement Parts Ordering Information
Air valve repair kit 233836 233836 233836 233836 233836 233836 233836 233836
Air motor seal repair kit 233837 233837 233837 233837 233837 233837 233842 233842
Air motor piston rod kit 233838 233838 233838 233838 233838 233838 233838 233838
Standard seal repair kit 233833 233833 233830 233830 233826 233826 233833 233833
construction UHMWPE/ UHMWPE/ UHMWPE/ UHMWPE/ UHMWPE/ UHMWPE/ UHMWPE/ UHMWPE/
PTFE PTFE PTFE PTFE PTFE PTFE PTFE PTFE
Displacement rod 15A118 15A118 15A120 15A120 15A119 15A119 15A118 15A118
construction SST SST SST SST SST SST SST SST
Ordering Information
2
88 F IN I SH ING EQU IPMENT ❚ MEDIUM PRESSURE PUMPS
Merkur 15:1, 20:1, 30:1 and 30:1 HFPneumatic 2-Ball Piston Pumps
Accessories245724 Siphon Hose and Strainer
Fits up to 8 gal (30 liter) container.
245737 Siphon Hose and StrainerFits up to 55 gal (200 liter) container.
233888 Pump Inlet Elbow Swivel, Stainless SteelUse to connect siphon hose to pump inlet. M26(m) x 22 mm tube fittings.Use with siphon hose 245724 or 245737.
245681 Pump Inlet Adapter, Stainless Steel3/4 npt(m) x M26(m)
243340 Pail Cover with AgitatorUse to agitate material in a 5 gal (18.9 l) pail.
222121 Fluid Regulator, Stainless SteelMaximum working pressure: 1500 psi (103 bar, 10.3 MPa). Regulator range: 150-1200 psi (10-82 bar, 1-8.2 MPa).
238890 Fluid Regulator, Stainless SteelMaximum working pressure: 6000 psi (420 bar, 42 MPa).Regulator range: 500-3000 psi (24-207 bar, 2.4-20.7 MPa).
223160 Pump Outlet Fluid Filter, Stainless Steel60 mesh (250 micron), 5000 psi (350 bar, 35 MPa), 3/8 npt (f) inlet, 1/4 npt (f) outlet.
238435 Replacement Filter Screen Element3-pack elements, 30 mesh, SST
238437 Replacement Filter Screen Element3-pack elements, 60 mesh, SST
234083 Pump Outlet Adapter, Stainless Steel3/8 npt(m) x 3/8 BSPP(m)
245718 Pump Air Inlet Adapter1/4 npt(m) x 15.5 mm diameter
245682 Pump Air Inlet Adapter3/8 BSPP(m) x 15.5 mm diameter
15A724 Pump Repair ToolUse to disassemble lower displacement pump.
246325 316 SST Ball KitReplacement for standard 304 SST balls.Use with 15:1 and 30:1 (1.6 gpm).High corrosive applications.
246324 316 SST Ball KitReplacement for standard 304 SST balls.Use with 20:1 and 40:1.High corrosive applications.
246323 316 SST Ball KitReplacement for standard 304 SST balls.Use with 30:1 (0.6 gpm).
Additional Lower Displacement Pumps245639 Lower Displacement Pump
40 cc/cycle (1.4 oz/cycle) delivery. PTFE/Leather throat packings, UHMWPE/PTFE piston packings.
245640 Lower Displacement Pump70 cc/cycle (2.4 oz/cycle) delivery. PTFE/Leatherthroat packings, UHMWPE/PTFE piston packings.
245641 Lower Displacement Pump100 cc/cycle (3.4 oz/cycle) delivery. PTFE/Leatherthroat packings, UHMWPE/PTFE piston packings.
2
89MEDIUM PRESSURE PUMPS ❚ F IN I SH ING EQU IPMENT
Orion™ 15:1 and 28:1Bellows Pumps
Features and Benefits• Ideal for moisture-sensitive and UV coatings
• Excellent reliability for corrosive fluids
• Superior handling of shear-sensitive materials
• 50% less service; no throat seal lubrication or packing adjustment
• Consistent finish quality for fine-finish applications
• Flexible, easy-to-install, easy-to-operate
Typical ApplicationsWood
– Automatic applications – Door/window manufacturing– Kitchen cabinetry– Furniture– General woodworking
Metal
– Hardener transfer– Farm equipment– Truck and bus manufacturing– Automotive components– General metal
Plastic
– Automatic applications– Automotive components– Electronic devices
Typical Fluids Handled• Isocyanates
• Waterborne and solvent borne coatings
• UV coatings
• Structural paints
• Polyester
• Acid-curing coatings
2
90 F IN I SH ING EQU IPMENT ❚ MEDIUM PRESSURE PUMPS
Orion 15:1 and 28:1Bellows Pumps
Technical SpecificationsOrion 15:1 Orion 28:1
Air Motor Diameter 6.3 in (160 mm) 6.3 in (160 mm)
Maximum fluid 1740 psi 3248 psi
outlet pressure (120 bar, 12.0 MPa) (224 bar, 22.4 MPa)
Maximum air input pressure 116 psi 116 psi
(8 bar, 0.8 MPa) (8 bar, 0.8 MPa)
Volume per cycle 5.6 oz (170 cc) 3.4 oz (100 cc)
Recommended cycle rates
Continuous use, full/part load 14/18 cpm 14/18 cpm
Intermittent use, full/part load 30/45 cpm 30/45 cpm
Air consumption @ 100 psi 16 scfm 16 scfm
(7 bar, 0.7 MPa) @ 20 cpm (0.45 m3/min) (0.45 m3/min)
Sound level @ 100 psi
(7 bar, 0.7 MPa) @ 20 cpm 87 dBA 87 dBA
Air inlet, pump 1/4 npt(m) or 1/4 npt(m) or
3/8 BSPP(m) 3/8 BSPP(m)
Fluid inlet, pump 3/4 npt(m) or 3/4 npt(m) or
1 BSPP (f) 1 BSPP (f)
Fluid outlet, pump 3/8 npt(m) or 3/8 npt(m) or
3/8 BSPP(f) 3/8 BSPP(f)
Air inlet, package 1/4 npt(f) 1/4 npt(f)
Weight, bare pump 66 lbs (30 kg) 58 lbs (26.4 kg)
Instruction manual, bare 309512 309512
Performance Chart for Orion 15:1 Pump
Performance Chart for Orion 28:1 Pump
FLU
ID O
UTL
ET P
RES
SUR
E ps
i (ba
r, M
Pa)
AIR
CO
NSU
MPT
ION
scf
m (
m3 /m
in)
2000 (138, 13.8)
1000 (69, 6.9)
1500 (103, 10.3)
500 (34, 3.4)
0
100(2.8)
75(2.1)
50(1.4)
25(0.7)
0gpm 0 1 2 3 4 5 6(lpm) (3.8) (7.6) (11) (15) (19) (23)
FLUID FLOW(Pump tested in No. 10 Wt. Oil)
AIR PRESSURES LEGEND
A = @ 115 psi (7.9 bar, 0.79 MPa) Air Consumption
B = @ 90 psi (6.2 bar, 0.62 MPa) Fluid Flow
C = @ 70 psi (4.8 bar, 0.48 MPa)
D = @ 40 psi (2.8 bar, 0.28 MPa)
D
C
B
A
B
C
22 45 67 89 112 134
CYCLES PER MINUTE
A
D
FLU
ID O
UTL
ET P
RES
SUR
E ps
i (ba
r, M
Pa)
AIR
CO
NSU
MPT
ION
scf
m (
m3 /m
in)
4500 (138, 13.8)
1500 (103, 10.3)
2500 (172, 17.2)
3500 (241, 24.1)
500 (34, 3.4)
0
90(2.5)
70(2.0)
50(1.4)
30(0.8)
10(0.3)
0gpm 0 0.5 1 1.5 2 2.5 3 3.5 (lpm) (1.9) (3.8) (5.7) (7.6) (9.5) (11.4) (13.3)
FLUID FLOW(Pump tested in No. 10 Wt. Oil)
AIR PRESSURES LEGEND
A = @ 115 psi (7.9 bar, 0.79 MPa) Air Consumption
B = @ 90 psi (6.2 bar, 0.62 MPa) Fluid Flow
C = @ 70 psi (4.8 bar, 0.48 MPa)
D = @ 40 psi (2.8 bar, 0.28 MPa)
D
C
B
AC
19 38 57 76 95 114 133
CYCLES PER MINUTE
A
D
B
2
91MEDIUM PRESSURE PUMPS ❚ F IN I SH ING EQU IPMENT
Orion 15:1 and 28:1Bellows Pumps
Ordering Information1. Select appropriate pump model based on pressure and flow requirements.
Refer to pump performance charts on previous page for more information.
2. When ordering a bare pump, select npt or BSPP thread design.
3. When ordering a package, order gun/siphon hose kit separately.
4. Order part number.
Repair KitsPump part number includes motor and lower displacement pump
Orion 15:1 Orion 28:1
Pump Part No. 245935/234084 245934/234085
Air Motor Kits
Air valve repair kit 233836 233836
Air motor seal repair kit 234041 234041
Air piston rod 234042 234042
Bellows seal kit 234043 234043
Lower Pump Kits
Pump packing kit (UHMWPE/PTFE/SST) 234046 234047
440 SST intake, piston ball and seat kit 234044 234045
Seal repair kit 234048 234049
Displacement rod, SST 15B013 15B015
Orion 15:1 2.7 gpm (10.2 lpm) 170 cc/cyclePart Thread Air Inlet Air Air Regulator Fluid Fluid FluidNumber Description Design Thread Regulator Gauge Outlet Filter Inlet
234084 Bare Pump npt 1/4 npt(m) — — 3/8 npt(m) — 3/4 npt(m)
245935 Bare Pump BSPP 3/8 BSPP(m) — — 3/8 BSPP(f) — 1 BSPP(f)
234087 Wall Mount npt 1/4 npt(f) 116513 110436 3/8 npt(m) 223160 3/4 npt(m)
234091 Cart Mount npt 1/4 npt(f) 116513 110436 3/8 npt(m) 223160 3/4 npt(m)
Orion 28:1 1.6 gpm (6.0 lpm) 100 cc/cycle Part Thread Air Inlet Air Air Regulator Fluid Fluid FluidNumber Description Design Thread Regulator Gauge Outlet Filter Inlet
234085 Bare Pump npt 1/4 npt(m) — — 3/8 npt(m) — 3/4 mpt(m)
245934 Bare Pump BSPP 3/8 BSPP(m) — — 3/8 BSPP(f) — 1 BSPP(f)
234089 Wall Mount npt 1/4 npt(f) 116513 110436 3/8 npt(m) 223160 3/4 npt(m)
234093 Cart Mount npt 1/4 npt(f) 116513 110436 3/8 npt(m) 223160 3/4 npt(m)
2
92 F IN I SH ING EQU IPMENT ❚ MEDIUM PRESSURE PUMPS
Accessories15B526 Siphon Hose Kit
With strainer and inlet fitting. Fits up to 8 gal (30 l) container with 28 mm adapter.
15B527 Siphon Hose Kit With strainer and inlet fitting. Fits up to 55 gal (200 l) container with 28 mm adapter.
15B528 5 Liter (1.3 Gal) Stainless Steel Cup Kit With 22 mm adapter
246300 AA Gun Suction KitWith AA Series G40 gun, hoses, siphon hose and second air regulator. Includes GG4xxx tip of choice.
246301 Airless Gun Suction KitWith Silver Plus™ gun, hoses and siphon hose. Includes GG4xxx tip of choice.
243340 Pail Cover with AgitatorUse to agitate material in a 5 gal (19 l) pail.
222121 Fluid Regulator, Stainless SteelMaximum working pressure: 1500 psi (103 bar, 10.3 MPa). Regulator range: 150 to 1200 psi (10 to 82 bar, 1 to 8.2 MPa)
223160 Pump Outlet Fluid Filter, Stainless Steel60 mesh (250 micron), 5000 psi (350 bar, 35 MPa), 3/8 npt(f) inlet, 1/4 npt(f) outlet
238435 Replacement Filter Screen Element3-pack elements, 30 mesh, SST
238437 Replacement Filter Screen Element3-pack elements, 60 mesh, SST
15B525 Pump Inlet Adapter, Stainless Steel1 BSPP(f) x 3/4 npt(m)
234083 Pump Outlet Adapter, Stainless Steel3/8 BSPP(m) x 3/8 npt(m)
245718 Pump Air Inlet Adapter1/4 npt(m) x 15.5 mm diameter
245682 Pump Air Inlet Adapter3/8 BSPP(m) x 15.5 mm diameter
246449 316 SST Ball Kit 28:1Replaces 440 SST balls for high corrosive applications
246448 316 SST Ball Kit 15:1Replaces 440 SST balls for high corrosive applications
Orion 15:1 and 28:1Bellows Pumps
2
93MEDIUM PRESSURE PUMPS ❚ F IN I SH ING EQU IPMENT
Features and Benefits• Extremely durable pump with long-life packing design
• Positive displacement, 2-ball piston design, provides uniform and easily controlled delivery
• Higher pump pressure and flow performance handles a broader range of paints and coatings
• Improved serviceability means fewer parts, faster repairs and lower overall maintenance and ownership costs
Typical Applications• Lacquers and varnishes in the wood products industries
• Epoxy and polyurethane coatings in metal products manufacturing industries
• Polyurethane coatings in the aerospace industry
Typical Fluids Handled• Acid-catalyzed lacquers and varnishes
• Enamels
• Polyurethane coatings
• Epoxy primers and coatings
• Zinc-rich primers
• Waterborne and solventborne coatings
Senator 17:1Stainless Dura-Flo
237280
Designed for
ease of service
Stainless Dura-Flo®
or carbon steel Xtreme™
models available
Reliable Senator
air motor
Senator 13:1, 17:1 and 25:1Pneumatic 2-Ball Piston Pumps
2
94 F IN I SH ING EQU IPMENT ❚ MEDIUM PRESSURE PUMPS
Senator 13:1, 17:1 and 25:1Pneumatic 2-Ball Piston Pumps
Technical SpecificationsSenator Senator Senator
Pump ratio 13:1 17:1 25:1
Maximum fluid outlet pressure 1300 psi 1700 psi 2500 psi
(90 bar, 9.0 MPa) (117 bar, 11.7 MPa) (172 bar, 17.2 MPa)
Maximum air input pressure 100 psi 100 psi 100 psi
(7 bar, 0.7 MPa) (7 bar, 0.7 MPa) (7 bar, 0.7 MPa)
Fluid flow @ 60 cpm 4.6 gpm (17.3 lpm) 3.4 gpm (13.0 lpm) 2.3 gpm (8.7 lpm)
Volume per cycle 10 oz (290 cc) 7 oz (220 cc) 5 oz (145 cc)
Air consumption @100 psi air @ 20 cpm 12 scfm (0.34 m3/min) 12 scfm (0.34 m3/min) 12 scfm (0.34 m3/min)
Sound pressure level @100 psi air @ 20 cpm 93 dBA 93 dBA 88 dBA
Air motor inlet 3/4 npsm(f) 3/4 npsm(f) 3/4 npsm(f)
Pump fluid inlet 1-1/4 npt(m) (Xtreme) 1-1/4 npt(m) (Xtreme) 1-1/2 npt(f)
2 npt(f) (Dura-Flo) 2 npt(f) (Dura-Flo)
Pump fluid outlet 1 npt(f) 1 npt(f) 3/4 npt(f)
Weight 96 lb. (44 kg) (Xtreme) 98 lb. (44 kg) (Xtreme) 86 lb (39 kg)
140 lb. (64 kg) (Dura-Flo) 240 lb. (109 kg) (Dura-Flo)
Instruction manual 309340 (Xtreme) 309340 (Xtreme) 308350
308360 (Dura-Flo) 308354 (Dura-Flo)
Dimensions
A
B
C
D
Fluid inletF
Fluid outletE
Air motor inlet3/4 npsm(f)
Model A B C D E FSenator 13:1 44.80 in 23.23 in 21.57 in 10.12 in 1 npt(f) 2 npt(f)Dura-Flo (1138 mm) (590 mm) (548 mm) (257 mm)Senator 13:1 44.96 in 23.38 in 21.57 in 11.89 in 1 npt(f) 1-1/4 npt(m)Xtreme (1142 mm) (594 mm) (548 mm) (302 mm)Senator 17:1 44.80 in 23.23 in 21.57 in 10.12 in 1 npt(f) 2 npt(f)Dura-Flo (1138 mm) (590 mm) (548 mm) (257 mm)Senator 17:1 44.96 in 23.38 in 21.57 in 11.89 in 1 npt(f) 1-1/4 npt(m)Xtreme (1142 mm) (594 mm) (548 mm) (302 mm)Senator 25:1 47.68 in 26.14 in 21.57 in 10.12 in 3/4 npt(f) ram adapter Dura-Flo (1211 mm) (664 mm) (548 mm) (257 mm) flange
2
95MEDIUM PRESSURE PUMPS ❚ F IN I SH ING EQU IPMENT
Senator 13:1, 17:1 and 25:1Pneumatic 2-Ball Piston Pumps
Performance Chart for Senator 13:1 Pump
Performance Chart for Senator 17:1 Pump
FLU
ID O
UTL
ET P
RES
SUR
E ps
i (ba
r, M
Pa)
AIR
CO
NSU
MPT
ION
scf
m (
m3 /m
in)
1500 (103, 10.3)
1000 (69, 6.9)
500 (34, 3.4)
0
150(4.3)
100(2.8)
50(1.4)
0
A
B
C
gpm 0 1 2 3 4 5 6(lpm) (3.8) (7.6) (11.4) (15.1) (18.9) (22.7)
12.5 25 37.5 50 62.5 75
CYCLES PER MINUTE
FLUID FLOW(Pump tested in No. 10 Wt. Oil)
AIR PRESSURES LEGEND
A = @ 100 psi (7.0 bar, 0.7 MPa) Air Consumption
B = @ 70 psi (4.8 bar, 0.5 MPa) Fluid Flow
C = @ 40 psi (2.8 bar, 0.3 MPa)
C
A
B
FLU
ID O
UTL
ET P
RES
SUR
E ps
i (ba
r, M
Pa)
AIR
CO
NSU
MPT
ION
scf
m (
m3 /m
in)
2000 (138, 13.8)
1500 (103, 10.3)
1000 (69, 6.9)
500 (34, 3.4)
0
200(5.7)
150(4.3)
100(2.8)
50(1.4)
0
A
B
C
gpm 0 1 2 3 4 5(lpm) (3.8) (7.6) (11.4) (15.1) (18.9)
18 36 54 72 90
CYCLES PER MINUTE
FLUID FLOW(Pump tested in No. 10 Wt. Oil)
B
C
A
AIR PRESSURES LEGEND
A = @ 100 psi (7.0 bar, 0.7 MPa) Air Consumption
B = @ 70 psi (4.8 bar, 0.5 MPa) Fluid Flow
C = @ 40 psi (2.8 bar, 0.3 MPa)
2
96 F IN I SH ING EQU IPMENT ❚ MEDIUM PRESSURE PUMPS
Ordering InformationPump part number includes motor and lower displacement pump
Senator 13:1 Senator 13:1 Senator 17:1 Senator 17:1 Senator 25:1Xtreme Dura-Flo Xtreme Dura-Flo Dura-Flo
Pump part number 245169 237517 245166 237280 686615
Air motor 217540 217540 217540 217540 217540
Lower displacement pump 244418 237514 244414 236470 241177
Construction CS SST CS SST SST
Fluid filter configuration No Filter No Filter No Filter No Filter No Filter
Piston seal construction XtremeSeal™/Leather Leather/PTFE XtremeSeal/Leather Leather/PTFE XtremeSeal/PTFE
Throat seal construction XtremeSeal/Leather Leather/PTFE XtremeSeal/Leather Leather/PTFE XtremeSeal/PTFE
Replacement Parts Ordering InformationAir motor repair kit 218122 218122 218122 218122 218122
Standard seal and ball kit 244854 237178 244852 237172 237609
Construction XtremeSeal/Leather Leather/PTFE XtremeSeal/Leather Leather/PTFE XtremeSeal/PTFE
Optional seal and ball kit 244904 237180 244902 237174 237238
Construction Tuff-Stack XtremeSeal/Leather Tuff-Stack XtremeSeal/Leather XtremeSeal/Leather
Optional seal and ball kit N/A 237179 N/A 237173 237236
Construction PTFE PTFE PTFE
Optional seal and ball kit N/A 237713 237710 237710 237234
Construction XtremeSeal/PTFE XtremeSeal/PTFE XtremeSeal/PTFE XtremeSeal/PTFE
Optional piston seal packings 244874 244874 244872 244872 244869
Construction Leather (10 pack) Leather (10 pack) Leather (10 pack) Leather (10 pack) Leather (10 pack)
Optional piston seal packings 244868 244868 244866 244866 244863
Construction XtremeSeal (10 pack) XtremeSeal (10 pack) XtremeSeal (10 pack) XtremeSeal (10 pack) XtremeSeal (10 pack)
Optional piston seal packings 244862 244862 244860 244860 244857
Construction Tuff-Stack (10 pack) Tuff-Stack (10 pack) Tuff-Stack (10 pack) Tuff-Stack (10 pack) Tuff-Stack (10 pack)
Optional throat seal packings 244873 244873 244871 244871 244869
Construction Leather (10 pack) Leather (10 pack) Leather (10 pack) Leather (10 pack) Leather (10 pack)
Optional throat seal packings 244867 244867 244865 244865 244863
Construction XtremeSeal (10 pack) XtremeSeal (10 pack) XtremeSeal (10 pack) XtremeSeal (10 pack) XtremeSeal (10 pack)
Optional throat seal packings 244861 244859 244859 244857
Construction Tuff-Stack (10 pack) Tuff-Stack (10 pack) Tuff-Stack (10 pack) Tuff-Stack (10 pack)
Standard displacement rod 197324 184487 197322 189316 190172
Construction SST/PlasmaCoat SST/Chrome SST/PlasmaCoat SST/Chrome SST/Chrome
Optional displacement rod 198418 N/A 198416 687219 N/A
Construction SST/Chrome SST/Chrome Ceramic
Standard cylinder 197319 184540 197317 189383 184503
Construction SST/Chrome SST/Chrome SST/Chrome SST/Chrome SST/Chrome
Optional cylinder N/A N/A N/A 687218 N/A
Construction CeramicNote: Optional throat and piston seal packings sold as 10-count convenience pack.
Tuff-Stack is a proprietary PTFE blend.Xtreme is a proprietary PTFE-filled UHMWPE blend.PlasmaCoat is a proprietary case hardening process.
Senator 13:1, 17:1 and 25:1Pneumatic 2-Ball Piston Pumps
2
97MEDIUM PRESSURE PUMPS ❚ F IN I SH ING EQU IPMENT
Ordering InformationThe following lower displacement pumps are not offered in complete Senator pump assemblies. To configure a complete Senator 13:1 or 17:1 pump with these lowers:
1. Select desired lower displacement pump, based on fluid pressure and flow requirements, material of construction andseal construction. Refer to Senator 13:1 and Senator 17:1 pump performance charts.
2. Select desired fluid filter configuration (built-in fluid filter in outlet housing or no fluid filter, standard outlet housing) for Senator 13:1 and Senator 17:1 Xtreme lower displacement pumps.
3. Order Senator air motor 217540.
4. For stainless steel Dura-Flo lower displacement pumps 236490, 237515, 236897, order connection kit 235417. For car-bon steel Xtreme lower displacement pumps 244419, 244424, 244415, 244422, order connection kit 244849.
Additional Lower Displacement Pumps for Senator 13:1Lower displacement pump 244419 244424 236490 237515
Description Senator 13:1 Lower Senator 13:1 Lower Senator 13:1 Lower Senator 13:1 Lower
Xtreme Xtreme Dura-Flo Dura-Flo
Material of construction CS CS SST SST
Fluid filter configuration Built-In Filter No Filter No Filter No Filter
Standard seal and ball kit 244854 244904 237179 237180
Construction XtremeSeal/Leather Tuff-Stack PTFE XtremeSeal/Leather
Standard displacement rod 197324 197324 184487 184487
Construction SST/PlasmaCoat SST/PlasmaCoat SST/Chrome SST/Chrome
Standard cylinder 197319 197319 184540 184540
Construction SST/Chrome SST/Chrome SST/Chrome SST/Chrome
Additional Lower Displacement Pumps for Senator 17:1Lower displacement pump 244415 244422 236897
Description Senator 17:1 Lower Senator 17:1 Lower Senator 17:1 Lower
Xtreme Xtreme Dura-Flo
Material of construction CS CS SST
Fluid filter configuration Built-In Filter No Filter No Filter
Standard seal and ball kit 244852 244902 237173
Construction XtremeSeal/Leather Tuff-Stack PTFE
Standard displacement rod 197322 197322 189316
Construction SST/PlasmaCoat SST/PlasmaCoat SST/Chrome
Standard cylinder 197317 197317 189383
Construction SST/Chrome SST/Chrome SST/Chrome
Senator 13:1, 17:1 and 25:12-Ball Pneumatic Piston Pumps
2
98 F IN I SH ING EQU IPMENT ❚ MEDIUM PRESSURE PUMPS
Accessories206221 Wall Mounting Bracket
For mounting a Senator pump to a wall.
244530 Heavy-Duty CartFor mounting Senator pump on a 2-wheel cart.
244527 Light-Duty CartFor mounting Senator pump on a 2-wheel cart.
245132 Floor Stand Kit, XtremeUse to mount Senator pumps 245166 and 245169 to thefloor. Includes 222274 floor stand, 198347 intake adapterand ball valve.
237781 Floor Stand Kit, Dura-FloUse to mount Senator pumps 237517 and 237280 to thefloor. Includes 222274 floor stand, 190166 intake adapterand ball valve.
207579 Padded PliersFor servicing Senator air motor trip rod.
112887 Packing Nut WrenchFor adjusting throat packing compression in pump. Use withlower displacement pumps 237514, 236470, 236490,237515 and 236897.
168513 Alignment ToolUse to ensure proper clearance and alignment for theSenator air manifolds.
235417 Connection Kit, Dura-FloKit to install lower displacement pump under existingSenator air motor. Includes carbon steel tie rods and otherconnecting hardware. Use with lower displacement pumps237514, 236470, 236490, 237515, 241177 and 236897.
220581 Pump Stand4 leg, extra sturdy stand.
244849 Connection Kit, XtremeKit to install lower displacement pump under existingSenator air motor. Includes tie rods and other connectinghardware. Use with lower displacement pumps 244418,244414, 244419, 244424, 244415 and 244422.
237782 Ram Adapter, Dura-FloUse to mount Senator pumps 237517 and 237280 to aram. Includes 2 npt(m) x flange and lug kit.
245131 Adapter, XtremeUse to mount Senator pumps 245166 and 245169 to aram. Includes flange and lug kit.
197682 Suction Tube, Extension, XtremeConnect with suction hose to siphon material from 5 galcontainer. 1 npt(f) outlet fitting.
245176 Suction Kit, Xtreme, Carbon SteelIncludes 197682 suction tube, 244516 (1 in) suction hose,6 ft (1.8 m), Quick Disconnect fitting, and elbow.
245136 55 Gallon Suction Tube Extension, XtremeIncludes 195151 intake tube and 114967 coupling toextend standard suction tube to bottom of 55 gal (200 l)drum. Connects to suction tube 197682 for Senator models 245166 and 245169.
184545 Suction Tube Extension, Dura-FloScrews into fluid intake to make a drum-length pump forSenator models 237517 and 237280.
222916 Suction Kit, Carbon SteelConnect to pump fluid inlet to draw fluid from 55 gal (200l) drum. Includes 222914 polyethylene hose, 1-1/2 in ID, 8 ft (2.4 m) length and 2 npt(m) outlet fitting.
236054 Suction Kit, Carbon SteelUse to siphon material out of a 55 gal (200 l) closed-enddrum. Includes siphon tube, bung adapter, 6 ft (1.8 m) nitrile hose and 1-1/2 npt(m) outlet fitting.
Senator 13:1, 17:1 and 25:1Pneumatic 2-Ball Piston Pumps
2
99MEDIUM PRESSURE PUMPS ❚ F IN I SH ING EQU IPMENT
Features and Benefits• Extremely durable pump with long-life packing design
• Positive displacement, 2-ball piston design provides uniform and easily controlled delivery
• Higher pump pressure and flow performance handles abroader range of paints and coatings
• Improved serviceability means fewer parts, faster repairsand lower overall maintenance and ownership costs
Typical Applications• Circulation of paints and coatings for air spray
and air-assisted spray applications
• Multiple gun air-assisted spray systems
• Multiple gun heated spray systems
• Cleaning
Typical Fluids Handled• Solventborne paints and coatings
• Waterborne paints and coatings
• Adhesives and sealants
• Water
Bulldog 10:1Stainless Dura-Flo
222827
Designed for
ease of service
Stainless Dura-Flo®
or carbon steel Xtreme™
models available
Reliable Bulldog
air motor
Bulldog® 10:1, 21:1, 24:1 and 28:1Pneumatic 2-Ball Piston Pumps
2
100 F IN I SH ING EQU IPMENT ❚ MEDIUM PRESSURE PUMPS
Bulldog 10:1, 21:1, 24:1 and 28:1Pneumatic 2-Ball Piston Pumps
Technical SpecificationsBulldog Bulldog Bulldog Bulldog
Pump ratio 10:1 21:1 24:1 28:1
Maximum fluid outlet pressure 1000 psi 2100 psi 2400 psi 2800 psi
(69 bar, 6.9 MPa) (145 bar, 14.5 MPa) (165 bar, 16.5 MPa) (193 bar, 19.3 MPa)
Maximum air input pressure 100 psi 100 psi 100 psi 100 psi
(7 bar, 0.7 MPa) (7 bar, 0.7 MPa) (7 bar, 0.7 MPa) (7 bar, 0.7 MPa)
Fluid flow @ 60 cpm 12 gpm (46 lpm) 4.6 gpm (17.3 lpm) 4.0 gpm (15.1 lpm) 3.4 gpm (13.0 lpm)
Volume per cycle 20 oz. (578 cc) 10 oz. (290 cc) 9 oz. (250 cc) 7 oz. (220 cc)
Air consumption @ 100 psi 32 scfm (0.91 m3/min) 32 scfm (0.91 m3/min) 32 scfm (0.91 m3/min) 32 scfm (0.91 m3/min)
air @ 20 cpm
Sound pressure level at 100 psi 90 dBA 90 dBA 90 dBA 90 dBA
air @ 20 cpm
Air motor inlet 3/4 npsm(f) 3/4 npsm(f) 3/4 npsm(f) 3/4 npsm(f)
Pump fluid inlet 2 npt(f) 2 npt(f) 1-1/4 npt(m) 1-1/4 npt(m) (Xtreme)
2 npt(f) (Dura-Flo)
Pump fluid outlet 1-1/2 npt(m) 1 npt(f) 1 npt(f) 1 npt(f)
Weight 134 lb. (61 kg) 240 lb. (109 kg) 110 lb. (50 kg) 240 lb. (109 kg)
Instruction manual 308151 (Carbon steel) 308360 309340 309340 (Xtreme)
308152 (Stainless steel) 308354 (Dura-Flo)
2
101MEDIUM PRESSURE PUMPS ❚ F IN I SH ING EQU IPMENT
Performance Chart for Bulldog 10:1
Bulldog 10:1, 21:1, 24:1 and 28:1Pneumatic 2-Ball Piston Pumps
FLU
ID O
UTL
ET P
RES
SUR
E ps
i (ba
r, M
Pa)
AIR
CO
NSU
MPT
ION
scf
m(m
3 /min
)
1000 (69, 6.9)
800 (55, 5.5)
600 (41, 4.1)
400 (28, 2.8)
200 (14, 1.4)
0
200(5.7)
160(4.5)
120(3.4)
80(2.3)
40(1.1)
0gpm 0 2 4 6 8 10(lpm) (7.6) (15.1) (22.7) (30.3) (37.9)
13 26 39 52 65
CYCLES PER MINUTE
FLUID FLOW(Pump tested in No. 10 Wt. Oil)
B
A
C A
B
C
AIR PRESSURES LEGEND
A = @ 100 psi (7.0 bar, 0.7 MPa) Air Consumption
B = @ 70 psi (4.8 bar, 0.5 MPa) Fluid Flow
C = @ 40 psi (2.8 bar, 0.3 MPa)
Performance Chart for Bulldog 21:1
FLU
ID O
UTL
ET P
RES
SUR
E ps
i (ba
r, M
Pa)
AIR
CO
NSU
MPT
ION
scf
m(m
3 /min
)
2000 (138, 13.8)
1500 (103, 10.3)
1000 (69, 6.9)
500 (34, 3.4)
0
200(5.7)
150(4.3)
100(2.8)
50(1.40)
0
C
A
B
C
gpm 0 1 2 3 4 5 6(lpm) (3.8) (7.6) (11.4) (15.1) (18.9) (22.7)
12.5 25 37.5 50 62.5 75
CYCLES PER MINUTE
FLUID FLOW(Pump tested in No. 10 Wt. Oil)
B
A
AIR PRESSURES LEGEND
A = @ 100 psi (7.0 bar, 0.7 MPa) Air Consumption
B = @ 70 psi (4.8 bar, 0.5 MPa) Fluid Flow
C = @ 40 psi (2.8 bar, 0.3 MPa)
Performance Chart for Bulldog 24:1
FLU
ID O
UTL
ET P
RES
SUR
E ps
i (ba
r, M
Pa)
AIR
CO
NSU
MPT
ION
scf
m(m
3 /min
)
4000 (276, 27.6)
2000 (138, 13.8)
3000 (207, 20.7)
1000 (69, 6.9)
0
200(5.7)
100(2.8)
150(4.3)
50(1.4)
0
A
C
A
B
C
gpm 0 1 2 3 4 5(lpm) (3.8) (7.6) (11.4) (15.1) (18.9)
15 30 45 60 75
CYCLES PER MINUTE
FLUID FLOW(Pump tested in No. 10 Wt. Oil)
AIR PRESSURES LEGEND
A = @ 100 psi (6.2 bar, 0.6 MPa) Air Consumption
B = @ 70 psi (4.8 bar, 0.5 MPa) Fluid Flow
C = @ 40 psi (2.8 bar, 0.3 MPa)
B
Performance Chart for Bulldog 28:1
FLU
ID O
UTL
ET P
RES
SUR
E ps
i (ba
r, M
Pa)
AIR
CO
NSU
MPT
ION
scf
m(m
3 /min
)
3000 (207, 20.7)
2500 (173, 17.3)
2000 (138, 13.8)
1500 (103, 10.3)
1000 (69, 6.9)
500 (34, 3.4)
0
150(4.2)
125(3.5)
100(2.8)
75(2.1)
50(1.4)
25(0.7)
0
A
C
A
B
C
gpm 0 1 2 3 4 5(lpm) (3.8) (7.6) (11.4) (15.1) (18.9)
18 36 54 72 90
CYCLES PER MINUTE
FLUID FLOW(Pump tested in No. 10 Wt. Oil)
AIR PRESSURES LEGEND
A = @ 100 psi (6.2 bar, 0.6 MPa) Air Consumption
B = @ 70 psi (4.8 bar, 0.5 MPa) Fluid Flow
C = @ 40 psi (2.8 bar, 0.3 MPa)
B
2
102 F IN I SH ING EQU IPMENT ❚ MEDIUM PRESSURE PUMPS
Dimensions for Bulldog 24:1 andBulldog 28:1 Xtreme Pumps
Dimensions for Bulldog 21:1 andBulldog 28:1 Dura-Flo Pumps
44.65 in(1134 mm)
23.23 in(590 mm)
21.42 in(544 mm)
10.12 in(257 mm)
Fluid inlet2 npt(f)
Fluid outlet1 npt(f)
Air motor inlet3/4 npsm(f)
Air motor inlet3/4 npsm(f)
Fluid outlet1 npt(f)
Fluid inlet1-1/4 npt(m)
11.9 in(302 mm)
21.4 in(544 mm)
23.4 in(594 mm)
44.8 in(1138 mm)
Bulldog 10:1, 21:1, 24:1 and 28:1Pneumatic 2-Ball Piston Pumps
Dimensions for Bulldog 10:1 and Bulldog 14:1 Pumps
46.58 in(1183 mm)
25.3 in(642.6 mm)
21.28 in(540.5 mm)Air motor inlet
3/4 npsm(f)
Fluid outlet1-1/2 npt(m)
Fluid inlet2 npt(f)
11.73 in(298 mm)
2
103MEDIUM PRESSURE PUMPS ❚ F IN I SH ING EQU IPMENT
Bulldog 10:1, 21:1, 24:1 and 28:1Pneumatic 2-Ball Piston Pumps
Ordering InformationPump part number includes motor and lower displacement pump
Bulldog 10:1 Bulldog 10:1 Bulldog 21:1
Dura-Flo Dura-Flo Dura-Flo
Pump part number 222826 222827 237516
Air motor 208356 208356 208356
Lower displacement pump 222801 222803 237514
Construction CS SST SST
Fluid filter configuration No Filter No Filter No Filter
Piston seal construction 3 PTFE/2 Leather 3 UHMWPE/2 PTFE 4 Leather/1 PTFE
Throat seal construction 3 PTFE/2 Leather 3 UHMWPE/2 PTFE 4 Leather/1 PTFE
Replacement Parts Ordering InformationAir motor repair kit 206734 206734 206734
Standard seal repair kit 222879 222875 237178
Construction 3 PTFE/2 Leather 3 UHMWPE/2 PTFE 4 Leather/1 PTFE
Optional seal repair kit 222876 222876 237180
Construction 5 PTFE 5 PTFE 3 XtremeSeal/2 Leather
Optional seal repair kit 222877 222877 237179
Construction 4 Leather/1 PTFE 4 Leather/1 PTFE 5 PTFE
Optional seal repair kit 222878 222878 237713
Construction 3 UHMWPE/2 Leather 3 UHMWPE/2 Leather 3 XtremeSeal/2 PTFE
Optional seal repair kit 222875 222879 N/A
Construction 3 UHMWPE/2 PTFE 3 PTFE/2 Leather
Optional seal repair kit 222880 222880 N/A
Construction 3 UHMWPE/2 Tuff-Stack™ 3 UHMWPE/2 Tuff-Stack
Optional piston repair kit 276788 N/A N/A
with wave spring and wiper
Construction 3 UHMWPE/2 PTFE
Standard displacement rod 184002 184002 184487
Construction SST/Chrome SST/Chrome SST/Chrome
Optional displacement rod 687119 687119 N/A
Construction Ceramic Ceramic
Standard cylinder 184003 184003 184540
Construction SST/Chrome SST/Chrome SST/Chrome
2
104 F IN I SH ING EQU IPMENT ❚ MEDIUM PRESSURE PUMPS
Bulldog 10:1, 21:1, 24:1 and 28:1Pneumatic 2-Ball Piston Pumps
Ordering Information, continuedPump part number includes motor and lower displacement pump
Bulldog 24:1 Bulldog 28:1 Bulldog 28:1
Xtreme Xtreme Dura-Flo
Pump part number 245116 245167 237287
Air motor 208356 208356 208356
Lower displacement pump 244416 244414 236470
Construction CS CS SST
Fluid filter configuration No Filter No Filter No Filter
Piston seal construction 3 XtremeSeal/2 Leather 3 XtremeSeal/2 Leather 4 Leather/1 PTFE
Throat seal construction 3 XtremeSeal/2 Leather 3 XtremeSeal/2 Leather 4 Leather/1 PTFE
Replacement Parts Ordering InformationAir motor repair kit 206734 206734 206734
Standard seal and ball kit 244853 244852 237172
Construction 3 XtremeSeal/2 Leather 3 XtremeSeal/2 Leather 4 Leather/1 PTFE
Optional seal and ball kit 244903 244902 237174
Construction 5 Tuff-Stack 5 Tuff-Stack 3 XtremeSeal/2 Leather
Optional seal and ball kit N/A N/A 237173
Construction 5 PTFE
Optional seal and ball kit N/A N/A 237710
Construction 3 XtremeSeal/2 PTFE
Optional piston seal packings 245230 244872 244872
Construction Leather (10 pack) Leather (10 pack) Leather (10 pack)
Optional piston seal packings 245231 244866 244866
Construction XtremeSeal (10 pack) XtremeSeal (10 pack) XtremeSeal (10 pack)
Optional piston seal packings 245229 244860 244860
Construction Tuff-Stack (10 pack) Tuff-Stack (10 pack) Tuff-Stack (10 pack)
Optional throat seal packings 245230 244871 244871
Construction Leather (10 pack) Leather (10 pack) Leather (10 pack)
Optional throat seal packings 245231 244865 244865
Construction XtremeSeal (10 pack) XtremeSeal (10 pack) XtremeSeal (10 pack)
Optional throat seal packings 245229 244859 244859
Construction Tuff-Stack (10 pack) Tuff-Stack (10 pack) Tuff-Stack (10 pack)
Standard displacement rod 197323 197322 189316
Construction SST/PlasmaCoat SST/PlasmaCoat SST/Chrome
Optional displacement rod 198417 198416 687219
Construction SST/Chrome SST/Chrome Ceramic
Standard cylinder 197318 197317 189383
Construction SST/Chrome SST/Chrome SST/Chrome
Optional cylinder N/A N/A 687218
Construction Ceramic
2
105MEDIUM PRESSURE PUMPS ❚ F IN I SH ING EQU IPMENT
Bulldog 10:1, 21:1, 24:1 and 28:1Pneumatic 2-Ball Piston Pumps
Ordering Information, continuedThe following lower displacement pumps are not offered in complete Bulldog pump assemblies. To configure a completeBulldog 10:1, 21:1, 24:1 or 28:1 pump with these lowers:
1. Select desired lower displacement pump, based on fluid pressure and flow requirements, material of construction andseal construction. Refer to Bulldog pump performance charts.
2. Select desired fluid filter configuration (built-in fluid filter in outlet housing or no fluid filter, standard outlet housing) for Bulldog 24:1 and Bulldog 28:1 Xtreme lower displacement pumps.
3. Order Bulldog air motor 208356.
4. For Bulldog 10:1 lower displacement pumps, order connection kit 235414. For Bulldog 21:1 and 28:1 Dura-Flo lower displacement pumps, order connection kit 235417. For Bulldog 24:1 and 28:1 Xtreme lower displacement pumps, order connection kit 244849.
Additional Lower Displacement PumpsLower displacement pump 222991 222992 241648 236226Description Bulldog 10:1 Lower Bulldog 10:1 Lower Bulldog 10:1 Lower Bulldog 10:1 Lower
Dura-Flo Dura-Flo Dura-Flo Dura-Flo
Material of construction CS CS SST SST
Fluid filter configuration No Filter No Filter No Filter No Filter
Standard seal repair kit 222877 222876 222880 222875
Construction 4 Leather/1 PTFE 5 PTFE 3 UHMWPE/2 Tuff-Stack 3 UHMWPE/2 PTFE
Standard displacement rod 184002 184002 184002 184002
Construction SST/Chrome SST/Chrome SST/Chrome SST/Chrome
Standard cylinder 184003 184003 184003 184003
Construction SST/Chrome SST/Chrome SST/Chrome SST/Chrome
Additional Lower Displacement PumpsLower displacement pump 222994 236230 222993Description Bulldog 10:1 Lower Bulldog 10:1 Lower Bulldog 10:1 Lower
Dura-Flo Dura-Flo Dura-Flo
Material of construction SST SST SST
Fluid filter configuration No Filter No Filter No Filter
Standard seal repair kit 222876 222877 222879
Construction 5 PTFE 4 Leather/1 PTFE 3 PTFE/2 Leather
Standard displacement rod 184002 184002 184002
Construction SST/Chrome SST/Chrome SST/Chrome
Standard cylinder 184003 184003 184003
Construction SST/Chrome SST/Chrome SST/Chrome
Note: Tuff-Stack is a proprietary PTFE blend.
2
106 F IN I SH ING EQU IPMENT ❚ MEDIUM PRESSURE PUMPS
Bulldog 10:1, 21:1, 24:1 and 28:1Pneumatic 2-Ball Piston Pumps
Ordering Information, continuedAdditional Lower Displacement PumpsLower displacement pump 222805 C59703 236490 237515Description Bulldog 14:1 Lower Bulldog 14:1 Lower Bulldog 21:1 Lower Bulldog 21:1 Lower
Dura-Flo Dura-Flo Dura-Flo Dura-Flo
Material of construction SST SST w/carbide balls SST SST
Fluid filter configuration No Filter No Filter No Filter No Filter
Standard seal repair kit 222845 222845 237179 237180
Construction 3 UHMWPE/2 PTFE 3 UHMWPE/2 PTFE 5 PTFE 3 XtremeSeal/2 Leather
Standard displacement rod 184276 184276 184487 184487
Construction SST/Chrome SST/Chrome SST/Chrome SST/Chrome
Standard cylinder 184461 184461 184540 184540
Construction SST/Chrome SST/Chrome SST/Chrome SST/Chrome
Additional Lower Displacement PumpsLower displacement pump 244417 244423 244415 244422 236897Description Bulldog 24:1 Lower Bulldog 24:1 Lower Bulldog 28:1 Lower Bulldog 28:1 Lower Bulldog 28:1 Lower
Xtreme Xtreme Xtreme Xtreme Dura-Flo
Material of construction CS CS CS CS SST
Fluid filter configuration Built-In Filter No Filter Built-In Filter No Filter No Filter
Standard seal repair kit 244853 244903 244852 244902 237173
Construction 3 XtremeSeal/2 Leather 5 Tuff-Stack 3 XtremeSeal/2 Leather 5 Tuff-Stack 5 PTFE
Standard displacement rod 197323 197323 197322 197322 189316
Construction SST/PlasmaCoat SST/PlasmaCoat SST/PlasmaCoat SST/PlasmaCoat SST/Chrome
Standard cylinder 197318 197318 197317 197317 189383
Construction SST/Chrome SST/Chrome SST/Chrome SST/Chrome SST/Chrome
Note: Tuff-Stack is a proprietary PTFE blend.XtremeSeal is a proprietary PTFE-filled UHMWPE blend.PlasmaCoat is a proprietary case hardening process.
2
107MEDIUM PRESSURE PUMPS ❚ F IN I SH ING EQU IPMENT
Bulldog 10:1, 21:1, 24:1 and 28:1Pneumatic 2-Ball Piston Pumps
Accessories206221 Wall Mounting Bracket
For mounting a Bulldog pump to a wall.
245132 Floor Stand Kit, XtremeUse to mount Bulldog pumps 245116 and 245167 to thefloor. Includes 222274 floor stand, 198347 intake adapterand ball valve.
237781 Floor Stand Kit, Dura-FloUse to mount Bulldog pump 237287 to the floor. Includes222274 floor stand, 190166 intake adapter and ball valve.
222780 Floor Stand Kit, Dura-FloUse to mount Bulldog pumps 222831, 237516, 222826and 222827 to the floor. Includes 222274 floor stand,190495 viton gasket and ball valve.
244530 Heavy-Duty CartFor mounting Bulldog pump on a 2-wheel cart.
244527 Light-Duty CartFor mounting Bulldog pump on a 2-wheel cart.
109507 Socket Service Tool, Bulldog 14:1Use to connect or disconnect displacement rod from piston assembly. Tool fits over the top of the displacement rod, making it easier to apply a 24 inadjustable wrench or 3/4 inch drive socket for servicing displacement rod.
109508 Socket Service Tool, Bulldog 10:1Use to connect or disconnect displacement rod from piston assembly. Tool fits over the top of the displacement rod, making it easier to apply a 24 inchadjustable wrench or 3/4 inch drive socket for servicing displacement rod.
235417 Connection Kit, Bulldog 21:1 and 28:1 Dura-FloKit to install lower displacement pump under existingBulldog air motor. Includes carbon steel tie rods and otherconnecting hardware.
244849 Connection Kit, Bulldog 24:1 and 28:1 XtremeKit to install lower displacement pump under existingBulldog air motor. Includes carbon steel tie rods and otherconnecting hardware.
235414 Connection Kit, Bulldog 10:1 and 14:1 Dura-FloKit to install lower displacement pump under existingBulldog air motor. Includes carbon steel tie rods and otherconnecting hardware.
207579 Padded PliersFor servicing Bulldog air motor trip rod.
168513 Alignment ToolUse to ensure proper clearance and alignment for theBulldog air manifolds.
184278 Packing Nut Wrench, Bulldog 10:1 Dura-FloFor adjusting throat packing compression in pump. Usewith Bulldog 10:1 Dura-Flo pumps.
112887 Packing Nut Wrench, Bulldog 21:1 & 28:1 Dura-FloFor adjusting throat packing compression in pump. Usewith Bulldog 21:1 and 28:1 Dura-Flo pumps.
237782 Adapter, RamUse to mount Bulldog pumps 222826, 222827, 222831 and 237516 to a ram. Includes 2 npt(m) x flange and lug kit.
245131 Adapter, RamUse to mount Bulldog pumps 245116 and 245167 to aram. Includes flange and lug kit.
245136 55 Gallon Suction Tube Extension, XtremeIncludes 195151 intake tube and 114967 coupling toextend standard suction tube to bottom of 55 gal (200 l) drum. Connects to suction tube 197682 forBulldog models 245116 and 245167.
184545 Suction Tube Extension, Bulldog 10:1, 14:1 & 21:1Screws into fluid intake to make a drum length pump forBulldog pumps 222826, 222827, 222831 and 237516.
222916 Suction Kit, Carbon SteelConnect to pump fluid inlet to draw fluid from 55 gal (200 l) drum. Includes 222914 polyethylene hose,1-1/2 inch ID, 8 ft (2.4 m) length and 2 npt(m) outlet fitting.
236054 Suction Kit, Carbon SteelUse to siphon material out of a 55 gal (200 l) closed-end drum. Includes siphon tube, bung adapter, 6 ft (1.8 m) nitrile hose and 1-1/2 npt(m) outlet fitting.
197682 Suction Tube, Aluminum, XtremeConnect with suction hose to siphon material from 5 gal (19 l) pail container. 1 npt(f) outlet fitting.
245176 Suction Kit, Xtreme, Carbon SteelIncludes 197682 suction tube, 244516 1 in suction hose,6 ft (1.8 m), Quick Disconnect fitting, and elbow.
2
108 F IN I SH ING EQU IPMENT ❚ MEDIUM PRESSURE PUMPS
Features and Benefits• Clean, quiet and efficient hydraulic power. Up to three
times more energy efficient than comparable compressed air systems.
• Positive displacement, 2-ball piston design provides uniform and easily controlled delivery
• Extremely durable pump with long life packing design
Typical Applications• In-plant air-assisted and airless paint supply
• Wood finishing operations involving stains and lacquers
• Central supply for multiple pressure cleaning guns
• Truck-mounted pressure cleaning operations
• Road-marking or striping
• Mobile airless spray machines
Typical Fluids Handled• Solventborne paints
• Waterborne paints
• Stains
• Latex emulsion paints
• Lacquers
• Cleaning solutions
• Water
Viscount I 1000218077
Viscount I 3000221080
Energy efficient
Viscount motor
reduces energy costs
Proven and
durable 2-ball
piston pump
Viscount® I 1000 and 3000 PumpsHydraulic 2-Ball Piston Pumps
2
109MEDIUM PRESSURE PUMPS ❚ F IN I SH ING EQU IPMENT
Viscount I 1000 and 3000 PumpsHydraulic 2-Ball Piston Pumps
Technical SpecificationsViscount I 1000 Viscount I 3000
Pump ratio 1:1 3:1
Maximum fluid outlet pressure 1000 psi 3000 psi
(69 bar, 6.9 MPa) (207 bar, 20.7 MPa)
Maximum hydraulic input pressure 1000 psi 1000 psi
(69 bar, 6.9 MPa) (69 bar, 6.9 MPa)
Oil flow @ 60 cpm 3.0 gpm (11.3 lpm) 3.0 gpm (11.3 lpm)
Fluid flow @ 60 cpm 3.0 gpm (11.3 lpm) 1.0 gpm (3.8 lpm)
Volume per cycle 6 oz (189 cc) 2 oz (62 cc)
Sound pressure level @1000 psi (69 bar, 6.9 MPa) 78 dBA 78 dBA
oil @ 20 cpm
Hydraulic motor inlet 3/4 unf (37º flare) 3/4 unf (37º flare)
Hydraulic motor outlet 7/8 unf (37º flare) 7/8 unf (37º flare)
Pump fluid inlet 3/4 npt(f) 3/4 npt(m)
Pump fluid outlet 1/2 npt(f) 3/8 npt(f)
Weight 33 lb. (15 kg) 37 lb. (17 kg)
Instruction manual 307622 307623
A
B
C
DimensionsModel A B CViscount I 1000 14.7 in 13.7 in 28.4 in
(373 mm) (348 mm) (721 mm)Viscount I 3000 14.7 in 15.2 in 29.9 in
(373 mm) (386 mm) (759 mm)Hydraulic inlet
3/4 unf (37° flare)
Fluid outlet1/2 npt(f) or
3/8 npt(f)
Fluid inlet3/4 npt(m)
or 3/4 npt(f)
Hydraulic outlet7/8 unf (37° flare)
2
110 F IN I SH ING EQU IPMENT ❚ MEDIUM PRESSURE PUMPS
Viscount I 1000 and 3000 PumpsHydraulic 2-Ball Piston Pumps
Ordering Information1. Select appropriate pump size (Viscount I 1000 or Viscount I 3000) based on pressure and flow requirements of
the application. Refer to Viscount I 1000 or Viscount I 3000 pump performance charts.
2. Order pump part number.
Pump part number includes motor and lower displacement pumpViscount I 1000 Viscount I 3000
Pump part number 218077 221080
Hydraulic motor/reciprocator 217222 217222
Lower displacement pump 224344 223587
Construction SST CS
Seal construction UHMWPE/Neoprene PTFE/Leather
Replacement Parts Ordering InformationHydraulic motor repair kit 218210 218210
Standard seal repair kit 224402 235635
Construction UHMWPE/Neoprene PTFE/Leather
Optional seal repair kit 224404 223675
Construction UHMWPE/PTFE UHMWPE/Leather
Optional seal repair kit N/A 237725
Construction PTFE
Optional throat seal packings 243624 243621
Construction Tuff-Stack Tuff-Stack
Optional piston seal packings 243623/243625 243621
Construction Tuff-Stack Tuff-Stack
Displacement rod 186997 223589
Construction SST SST
Cylinder 186994 N/A
Housing sleeve N/A 178902
Construction SST SSTNote: Tuff-Stack part numbers sold as 12-count convenience pack.
Performance Chart for Viscount I 1000 Pump
Performance Chart for Viscount I 3000 Pump
FLU
ID O
UTL
ET P
RES
SUR
E ps
i (ba
r, M
Pa)
1000 (69, 6.9)
800 (55, 5.5)
600 (41, 4.1)
400 (27, 2.7)
200 (14, 1.4)
0
A
B
C
Fluid flow gpm (lpm) 0 1 (3.8) 1.5 (5.7) 2 (7.6) 2.5 (9.5) 3 (11.4)Hydraulic flow gpm (lpm) 1 (3.8) 1.5 (5.7) 2 (7.6) 2.5 (9.5) 3 (11.4)
20 30 40 50 60
CYCLES PER MINUTE
FLUID FLOW(Pump tested in No. 10 Wt. Oil)
HYDRAULIC OIL PRESSURES
A = @ 1000 psi (69 bar, 6.8 MPa)
B = @ 700 psi (48 bar, 4.8 MPa)
C = @ 400 psi (27 bar, 2.7 MPa)
FLU
ID O
UTL
ET P
RES
SUR
E ps
i (ba
r, M
Pa)
3000 (207, 20.7)
2500 (173, 17.3)
2000 (138, 13.8)
1500 (103, 10.3)
1000 (69, 6.9)
500 (34, 3.4)
0
A
B
C
12 24 36 48 60
CYCLES PER MINUTE
FLUID FLOW(Pump tested in No. 10 Wt. Oil)
HYDRAULIC OIL PRESSURE
A = @ 1000 psi (69 bar, 6.8 MPa)
B = @ 700 psi (48 bar, 4.8 MPa)
C = @ 400 psi (27 bar, 2.7 MPa)
Fluid flow gpm (lpm) 0 0.2 (0.8) 0.4 (1.5) 0.6 (2.3) 0.8 (3.0) 1 (3.8)Hydraulic flow gpm (lpm) 0.6 (2.3) 1.2 (4.5) 1.8 (6.8) 2.4 (9.1) 3 (11.4)
2
111MEDIUM PRESSURE PUMPS ❚ F IN I SH ING EQU IPMENT
Viscount I 1000 and 3000 PumpsHydraulic 2-Ball Piston Pumps
Accessories207365 Wall Bracket
For mounting a Viscount pump to a wall.
220581 Pump Floor StandFor mounting a Viscount pump to the floor.
Hydraulic Shutoff ValvesMax. working pressure: 3000 psi (20.7 MPa, 207 bar). 3/4 npt(f)102644 3/4 npt(f) for supply line102646 1 npt(f) for return line
169236 Hydraulic Oil5 gal (18.9 l) container.
189305 Assembly ToolRequired for servicing the yoke and trip rod in theViscount motor.
515258 Hydraulic Pressure Control Valve3/4 npt inlet, 3/4 npt outlet,1/4 npt drain, 1/4 npt gauge.
207484 Siphon Kit, AluminumUse to siphon fluid from a 5 gal (18.9 l) pail. Includesnylon suction hose 214960, 3/4 in ID, 3.5 ft (1.1 m)long, 3/4 npt(f) swivel outlet fitting.
208920 Siphon Kit, AluminumUse to siphon fluid from a 5 gal (18.9 l) pail. Includesnylon suction hose 170706, 1 in ID, 4 ft (1.2 m) long, 3/4 npt(f) swivel outlet fitting, inlet strainer.
208259 Siphon Kit, Carbon SteelUse to siphon fluid from a 55 gal (200 l) drum. Includesnylon suction hose 214961, 3/4 in ID, 6 ft (1.8 m), 3/4 npt(f) swivel outlet fitting, bung adapter.
2
112 F IN I SH ING EQU IPMENT ❚ MEDIUM PRESSURE PUMPS
Features and Benefits• Clean, quiet and efficient hydraulic power. Up to
three times more energy efficient than comparablecompressed air system.
• Positive displacement, 2-ball piston design providesuniform and easily controlled delivery
• Extremely durable pump with long life packingdesign
Typical Applications• Wood finishing operations with stains and lacquers
• Line striping trucks
• Lubrication trucks
• Bulk transfer
Typical Fluids Handled• Solventborne paints and coatings
• Waterborne paints and coatings
• Stains and lacquers
• Roof coatings
• Waterproofing materials
• Lubricating fluids
• Lubricating oils
Viscount II 2600222892
Energy efficient
Viscount II motor
reduces energy costs
Proven and durable
Dura-Flo® pump
Viscount® II 1000, 2000 and 2600 PumpsHydraulic 2-Ball Piston Pumps
2
113MEDIUM PRESSURE PUMPS ❚ F IN I SH ING EQU IPMENT
Viscount II 1000, 2000 and 2600 PumpsHydraulic 2-Ball Piston Pumps
Technical SpecificationsViscount II 1000 Viscount II 2000 Viscount II 2700
Pump ratio 0.67:1 1.33:1 1.73:1
Maximum fluid outlet pressure 1000 psi 2000 psi 2600 psi
(69 bar, 6.9 MPa) (138 bar, 13.8 MPa) (179 bar, 17.9 MPa)
Maximum hydraulic input pressure 1500 psi 1500 psi 1500 psi
(104 bar, 10.4 MPa) (104 bar, 10.4 MPa) (104 bar, 10.4 MPa)
Oil flow @ 60 cpm 12 gpm (45 lpm) 12 gpm (45 lpm) 12 gpm (45 lpm)
Fluid flow @ 60 cpm 15 gpm (56.7 lpm) 9.2 gpm (34.7 lpm) 6.8 gpm (25.9 lpm)
Volume per cycle 32 oz (945 cc) 20 oz (578 cc) 15 oz (431 cc)
Sound pressure level @1500 psi
(103 bar, 10.3 MPa) oil @ 20 cpm 78 dBA 78 dBA 78 dBA
Hydraulic motor inlet 3/4 npt(f) 3/4 npt(f) 3/4 npt(f)
Hydraulic motor outlet 1 npt(f) 1 npt(f) 1 npt(f)
Pump fluid inlet 2 npt(f) 2 npt(f) 2 npt(f)
Pump fluid outlet 1-1/2 npt(f) 1-1/2 npt(m) 1-1/2 npt(m)
Weight 98 lb. (44 kg) 196 lb. (89 kg) 196 lb. (89 kg)
Instruction manual 307160 308151 (Carbon steel) 308147 (Carbon steel)
308152 (Stainless steel) 308148 (Stainless steel)
25.3 in(642.6 mm)
11.73 in(298.0 mm)
Hydraulicoutlet
1 npt(f)
Hydraulicinlet
3/4 npt(f)
Fluid outlet1-1/2 npt(m)
Dimensions for Viscount II 2000 and Viscount II 2600 Pumps
Dimensions for Viscount II 1000 Pump
48.1 in(1220 mm)
23.2 in(585 mm)
Fluid Outlet1-1/2 npt(f)
Hydraulic outlet
1 npt(f)
Hydraulic inlet
3/4 npt(f)
Fluid Inlet2 npt(f)
22.95 in(622.2 mm)
2000
24.5 in(622.2 mm)
260048.25 in
(1264.8 mm)2000
49.8 in(1264.8 mm)
2600
Fluid inlet2 npt(f)
24.9 in(635 mm)
2
114 F IN I SH ING EQU IPMENT ❚ MEDIUM PRESSURE PUMPS
Viscount II 1000, 2000 and 2600 PumpsHydraulic 2-Ball Piston Pumps
Performance Chart for Viscount II 1000 Pump
Performance Chart for Viscount II 2000 Pump
FLU
ID O
UTL
ET P
RES
SUR
E ps
i (ba
r, M
Pa)
1000 (69, 6.9)
800 (55, 5.5)
600 (41, 4.1)
400 (27, 2.7)
200 (14, 1.4)
0
7 13 20 26 33 40 46
CYCLES PER MINUTE
FLUID FLOW(Pump tested in No. 10 Wt. Oil)
HYDRAULIC OIL PRESSURES
A = @ 1500 psi (103 bar, 10.3 MPa)
B = @ 1050 psi (72 bar, 7.2 MPa)
C = @ 600 psi (41 bar, 4.1 MPa)
C
B
A
Fluid flow gpm (lpm) 0 2 (7.6) 3 (11.3) 5 (18.9) 7 (26.5) 8 (30.2) 10 (37.8) 12 (45.4)Hydraulic flow gpm (lpm) 1.4 (5.3) 2.6 (9.8) 4 (15.1) 5.2 (19.6) 6.6 (29.4) 8 (30.2) 9.2 (34.8)
Performance Chart for Viscount II 2600 Pump
FLU
ID O
UTL
ET P
RES
SUR
E ps
i (ba
r, M
Pa)
2500 (173, 17.3)
2000 (138, 13.8)
1500 (103, 10.3)
1000 (69, 6.9)
500 (34, 3.4)
0
A
B
18 36 54 72 90
CYCLES PER MINUTE
FLUID FLOW(Pump tested in No. 10 Wt. Oil)
C
Fluid flow gpm (lpm) 0 2 (7.6) 4 (15.4) 6 (22.7) 8 (30.3) 10 (37.9)Hydraulic flow gpm (lpm) 3.6 (13.6) 7.2 (27.2) 10.8 (40.8) 14.4 (54.4) 18 (68)
HYDRAULIC OIL PRESSURES
A = @ 1500 psi (103 bar, 10.3 MPa)
B = @ 1050 psi (72 bar, 7.2 MPa)
C = @ 600 psi (41 bar, 4.1 MPa)
FLU
ID O
UTL
ET P
RES
SUR
E ps
i (ba
r, M
Pa)
2000 (138, 13.8)
1600 (110, 11.0)
1200 (83, 8.3)
800 (55, 5.5)
400 (28, 2.8)
0
A
B
C
13 26 39 52 65
CYCLES PER MINUTE
FLUID FLOW(Pump tested in No. 10 Wt. Oil)
Fluid flow gpm (lpm) 0 2 (7.6) 4 (15.1) 6 (22.7) 8 (30.3) 10 (37.8)Hydraulic flow gpm (lpm) 2.6 (9.8) 5.2 (19.6) 7.8 (29.5) 10.4 (39.3) 13 (49.1)
HYDRAULIC OIL PRESSURES
A = @ 1500 psi (103 bar, 10.3 MPa)
B = @ 1050 psi (72 bar, 7.2 MPa)
C = @ 600 psi (41 bar, 4.1 MPa)
2
115MEDIUM PRESSURE PUMPS ❚ F IN I SH ING EQU IPMENT
Ordering InformationPump part number includes motor and lower displacement pump
Viscount II 1000 Viscount II 2000 Viscount II 2000 Viscount II 2600 Viscount II 2600
Pump part number 210313 222834 222900 222892 222897Hydraulic motor/reciprocator 235345 235345 235345 235345 235345
Lower displacement pump 210208 222801 222803 222796 222805
Construction CS CS SST CS SST
Seal construction 4 UHMWPE/2 Leather 3 PTFE/2 Leather 3 UHMWPE/2 PTFE 3 PTFE/2 Leather 3 UHMWPE/2 PTFE
Replacement Parts Ordering InformationHydraulic motor repair kit 223654 223654 223654 223654 223654
Standard seal repair kit 223439 222879 222875 222849 222845
Construction 4 UHMWPE/2 Leather 3 PTFE/2 Leather 3 UHMWPE/2 PTFE 3 PTFE/2 Leather 3 UHMWPE/2 PTFE
Optional seal repair kit 224443 222876 222876 222847 222847
Construction 4 UHMWPE/2 Leather 5 PTFE 5 PTFE 4 Leather/1 PTFE 4 Leather/1 PTFE
Optional seal repair kit N/A 222877 222877 222846 222846
Construction 4 Leather/1 PTFE 4 Leather/ 1 PTFE 5 PTFE 5 PTFE
Optional seal repair kit N/A 222878 222878 222845 222849
Construction 3 UHMWPE/2 Leather 3 UHMWPE/2 Leather 3 UHMWPE/2 PTFE 3 PTFE/2 Leather
Optional seal repair kit N/A 222875 222879 222848 222848
Construction 3 UHMWPE/2 PTFE 3 PTFE/2 Leather 3 UHMWPE/2 Leather 3 UHMWPE/2 Leather
Optional seal repair kit N/A 222880 222880 N/A N/A
Construction 3 UHMWPE/2 Tuff-Stack 3 UHMWPE/2 Tuff-Stack
Optional piston repair kit N/A 276788 N/A N/A N/A
with wave spring and wiper
Construction 3 UHMWPE/2 PTFE
Standard displacement rod 217478 184002 184002 184276 184276
Construction CS SST SST SST SST
Optional displacement rod N/A 687119 687119 687118 687118
Construction Ceramic Ceramic Ceramic Ceramic
Cylinder 181269 184003 184003 184461 184461
Construction SST SST SST SST SST
Note: Tuff-Stack is a proprietary PTFE blend.
Viscount II 1000, 2000 and 2600 PumpsHydraulic 2-Ball Piston Pumps
2
116 F IN I SH ING EQU IPMENT ❚ MEDIUM PRESSURE PUMPS
Ordering Information, continuedThe following lower displacement pumps are not offered in complete Viscount II pump assemblies. To configure a complete Viscount II 2000 or 2600 pump with these lowers:
1. Select desired lower displacement pump, based on fluid pressure and flow requirements, material of construction andseal construction.
2. Select appropriate seal construction based on the chemical characteristics of the fluid to be handled.
3. Order standard Viscount II hydraulic motor 235345.
4. Order pump connection kit 222976.Additional Lower Displacement Pumps
Lower displacement pump 222991 222992 241648 236226 222994Description Viscount II 2000 Viscount II 2000 Viscount II 2000 Viscount II 2000 Viscount II 2000
Lower Lower Lower Lower Lower
Material of construction CS CS SST SST SST
Standard seal repair kit 222877 222876 222880 222875 222876
Construction 4 Leather/1 PTFE 5 PTFE 3 UHMWPE/2 Tuff-Stack 3 UHMWPE/2 PTFE PTFE
Standard displacement rod 184002 184002 184002 184002 184002
Construction SST SST SST SST SST
Standard cylinder 184003 184003 184003 184003 184003
Construction SST SST SST SST SST
Additional Lower Displacement Pumps
Lower displacement pump 236230 222993 222988 241956 687055 C59703Description Viscount II 2000 Viscount II 2000 Viscount II 2600 Viscount II 2600 Viscount II 2600 Viscount II 2600
Lower Lower Lower Lower Lower Lower
Material of construction SST SST CS SST SST SST w/carbide balls
Standard seal repair kit 222877 222879 222846 222845 N/A 222845
Construction 4 Leather/1 PTFE 3 PTFE/2 Leather 5 PTFE 3 UHMWPE/2 PTFE 3 UHMWPE/2 Tuff-Stack 3 UHMWPE/2 PTFE
Standard displacement rod 184002 184002 184276 687118 184276 184276
Construction SST SST SST Ceramic SST SST
Standard cylinder 184003 184003 184461 184461 184461 184461
Construction SST SST SST SST SST SST
Note: Tuff-Stack is a proprietary PTFE blend.
Viscount II 1000, 2000 and 2600 PumpsHydraulic 2-Ball Piston Pumps
2
117MEDIUM PRESSURE PUMPS ❚ F IN I SH ING EQU IPMENT
Viscount II 1000, 2000 and 2600 Pumps2-Ball Hydraulic Piston Pumps
Accessories206221 Wall Mounting Bracket
For mounting a Viscount II pump to a wall.
109508 Service ToolFits over the top of the displacement rod, making iteasier to apply a 24-inch adjustable wrench or 3/4 indrive socket when connecting or disconnecting the rodfrom the piston assembly.
169236 Hydraulic Oil5 gal (18.9 l) size container.
102644 Shut-off ValveFor hydraulic supply or return line; 3/4 npt(f).
102646 Shut-off ValveFor hydraulic supply or return line; 1 npt(f).
208920 Siphon Kit, AluminumUse to siphon fluid from a 5 gal (18.9 l) pail. Includesnylon suction hose 170706, 1 in ID, 4 ft (1.2 m) long, 3/4 npt(f) swivel outlet fitting. Requires 2 in(m) x 1 in(f)bushing (102283) and 1 in(m) x 3/4 in(m) reducing nipple (158555).
207484 Siphon Kit, AluminumUse to siphon fluid from a 5 gal (18.9 l) pail. Includesnylon suction hose 214960, 3/4 in ID, 3.5 ft (1.1 m)long, 3/4 npt(f) swivel outlet fitting. Requires 2 in(m) x 1 in(f) bushing (102283) and 1 in(m) x 3/4 in(m) reducing nipple (158555).
208259 Siphon Kit, Carbon SteelUse to siphon fluid from a 55 gal (200 l) drum. Includesnylon suction hose 214961, 3/4 in ID, 6 ft (1.8 m) long, 3/4 npt(f) swivel outlet fitting and bungadapter. Requires 2 in(m) x 1 in(f) bushing (102283) and1 in(m) x 3/4 in(m) reducing nipple (158555).
222780 Floor StandUse to mount Viscount II 2000 and 2600 pumps to floor. Includes 222274 floor stand, ball valve and 109495Viton gasket.
109507 Socket Service Tool, Viscount II 2600Use to connect or disconnect displacement rod from piston assembly. Tool fits over the top of the displacement rod, making it easier to apply a 24 inchadjustable wrench or 3/4 inch drive socket for servicing displacement rod.
109508 Socket Service Tool, Viscount II 2000Use to connect or disconnect displacement rod from piston assembly. Tool fits over the top of the displacement rod, making is easier to apply a 24 inchadjustable wrench or 3/4 inch drive socket for servicing displacement rod.
222976 Connection Kit, Viscount II 2000 and 2600Kit to install lower displacement pump under existingViscount II motor. Includes carbon steel tie rods and other connecting hardware.
184278 Packing Nut Wrench, Viscount II 2000 and 2600For adjusting throat packing compression in pump.
237782 Adapter, RamUse to mount Viscount II 2000 and 2600 pumps to aram. Includes 2 npt(m) x flange and lug kit.
184545 Suction Tube ExtensionScrews into fluid intake to make a drum length pump for Viscount II 2000 and 2600 pumps.
2
118 F IN I SH ING EQU IPMENT ❚ MEDIUM PRESSURE PUMPS
Features and Benefits• Bellows seal design provides low maintenance with no
seals exposed to the atmosphere
• Bellows seal design eliminates conventional throatseals, providing high reliability for moisture-sensitivematerials
• Reversible outlet manifold simplifies plumbing
• Vertical ball check design assures uniform ballwear and long life
Typical Applications• Catalyst feed for proportioning systems
• Air-assisted and airless feed pump
• Epoxy can coating
• Gel coat for fiberglass reinforced plastic
Typical Fluids Handled• Catalyzed coatings
• Gel coats
• High solids coatings
• Abrasive materials
• Solventborne and waterborne fluids
• Epoxies
Glutton 12:1 220664
Patented piston seals provide long life and low maintenancePump stand included for
ease of mounting
Bellows seal protects piston rod and piston seal from fluid and abrasive particles
Glutton® 12:1 and 25:1Heavy-Duty, Dual Piston Pupms
2
119MEDIUM PRESSURE PUMPS ❚ F IN I SH ING EQU IPMENT
Glutton 12:1 and 25:1Heavy-Duty, Dual Piston Pumps
Technical SpecificationsGlutton Glutton
Pump ratio 12:1 25:1
Maximum fluid outlet pressure 1200 psi 2500 psi
(82 bar, 8.2 MPa) (170 bar, 17 MPa)
Maximum air input pressure 100 psi 100 psi
(7 bar, 0.7 MPa) (7 bar, 0.7 MPa)
Fluid flow @ 60 cpm 2 gpm (7.5 lpm) 0.9 gpm (3.4 lpm)
Volume per cycle 4 oz (128 cc) 2 oz (58 cc)
Air consumption @100 psi @ 20 cpm 15 scfm (0.42 m3/min) 15 scfm (0.42 m3/min)
Sound pressure level @100 psi 88 dBA 88 dBA
air @ 20 cpm
Air motor inlet 1/2 npt(f) 1/2 npt(f)
Pump fluid inlet 1-1/4 npt(f) 1-1/4 npt(f)
Pump fluid outlet 1 npt(f) 3/4 npt(f)
Weight 78 lb. (35 kg) 61 lb. (27 kg)
Instruction manual 307843 307843
B
C
Dimensions for Glutton 12:1 and 25:1 Pumps
A
Model A B CGlutton 12:1 15.1 in 19.6 in 15.8 in
(384 mm) (498 mm) (401 mm)Glutton 25:1 12.6 in 19.6 in 15.8 in
(320 mm) (498 mm) (401 mm)
Air motor inlet1/2 npt(f)
Four-hole bolt patternon 10.5 in (267 mm)
diameter circle
Three-hole bolt patternon 6.38 in (162 mm)
diameter circleFluid outlet1 npt(f) or3/4 npt(f)
Fluid inlet1-1/4 npt(f)
2
120 F IN I SH ING EQU IPMENT ❚ MEDIUM PRESSURE PUMPS
Glutton 12:1 and 25:1Heavy-Duty, Dual Piston Pumps
Performance Chart for Glutton 12:1 Pump
Performance Chart for Glutton 25:1 Pump
FLU
ID O
UTL
ET P
RES
SUR
E ps
i (ba
r, M
Pa)
AIR
CO
NSU
MPT
ION
scf
m(m
3 /min
)
1250 (86, 8.6)
1000 (69, 6.9)
750(52, 5.2)
500(34, 3.4)
250 (17, 1.7)
0
60(1.7)
48(1.4)
36(1.0)
24(0.7)
12(0.4)
0
A
B
C
gpm 0 0.5 1 1.5 2(lpm) (1.9) (3.8) (5.7) (7.6)
15 30 45 60
CYCLES PER MINUTE
FLUID FLOW(Pump tested in No. 10 Wt. Oil)
AIR PRESSURES LEGEND
A = @ 100 psi (7 bar, 0.7 MPa) Air Consumption
B = @ 70 psi (4.8 bar, 0.5 MPa) Fluid Flow
C = @ 40 psi (2.8 bar, 0.3MPa)
C
B
A
FLU
ID O
UTL
ET P
RES
SUR
E ps
i (ba
r, M
Pa)
AIR
CO
NSU
MPT
ION
scf
m(m
3 /min
)
2500 (170, 17.0)
2000 (138, 13.8)
1500 (103, 10.3)
1000 (69, 6.9)
500 (34, 3.4)
0
60(1.7)
48(1.4)
36(1.0)
24(0.7)
12(0.4)
0
A
B
C
gpm 0 0.2 0.4 0.6 0.8 1(lpm) (0.8) (1.5) (2.3 ) (3.0) (3.8)
15 30 45 60 75
CYCLES PER MINUTE
FLUID FLOW(Pump tested in No. 10 Wt. Oil)
AIR PRESSURES LEGEND
A = @ 100 psi (7 bar, 0.7 MPa) Air Consumption
B = @ 70 psi (4.8 bar, 0.5 MPa) Fluid Flow
C = @ 40 psi (2.8 bar, 0.3 MPa)
C
B
A
2
121MEDIUM PRESSURE PUMPS ❚ F IN I SH ING EQU IPMENT
Glutton 12:1 and 25:1Heavy-Duty, Dual Piston Pumps
Glutton 12:1 Glutton 12:1 Glutton 12:1 Glutton 12:1Pump part number 220664 220667 237009 237012
Construction CS SST CS SST
Piston seal construction UHMWPE UHMWPE Nylon Nylon
Replacement Parts Ordering InformationAir valve and pilot valve repair kit 220656 220656 220656 220656
Standard piston seals and bellows kit 221136 221136 237017 237017
Construction UHMWPE UHMWPE Nylon Nylon
Optional piston seals and bellows kit 237017 237017 221136 221136
Construction Nylon Nylon UHMWPE UHMWPE
Standard fluid piston 189433 189433 189433 189433
Construction SST SST SST SST
Optional carbide ball and seat kit (qty: 2 each) 221134 221134 221134 221134
Glutton 25:1 Glutton 25:1 Glutton 25:1 Glutton 25:1Pump part number 220665 220668 237010 237013
Construction CS SST CS SST
Piston seal construction UHMWPE UHMWPE Nylon Nylon
Replacement Parts Ordering InformationAir valve and pilot valve repair kit 220656 220656 220656 220656
Standard piston seals and bellows kit 220950 220950 237016 237016
Construction UHMWPE UHMWPE Nylon Nylon
Optional piston seals and bellows kit 237016 237016 220950 220950
Construction Nylon Nylon UHMWPE UHMWPE
Optional piston seal kit 220660 220660 220660 220660
Construction Urethane Urethane Urethane Urethane
Standard fluid piston 189434 189434 189434 189434
Construction SST SST SST SST
Optional carbide ball and seat kit (qty: 2 each) 221135 221135 221135 221135
Ordering Information
Accessories206221 Wall Bracket
For mounting Glutton pump on wall.
102969 Loctite® High Strength SealantTo secure piston shafts to the piston stud.
223319 Return Tube KitUse to return circulated fluid back to a 55 gal (200 l) drum through a drum cover. Includes SST returntube, SST bushing and SST elbow.
208259 55 Gallon (200 Liter) Suction KitSuction hose (3/4 in ID x 6 ft (1.8 m)), elbow, bungadapter, riser tube, 3/4 in npt(f) outlet fitting.
237949 Stainless Steel Drum Cover KitFor 55 gal (200 l) drum applications to siphon directlyfrom a drum. Includes SST drum cover, agitator gasket,access hole plug and fasteners.
204385 Elevator with Fixed MountingUse with drum cover kit (237949) and air control kit(237579) to raise and lower pump when changingdrums.
237579 Air Control KitUse with elevator 204385 to raise and lower drum cover.
2
122 F IN I SH ING EQU IPMENT ❚ MEDIUM PRESSURE PUMPS
Notes
123
3
HIGH PRESSURE PUMPS ❚ F IN I SH ING EQU IPMENT
Quick Reference Pump IndexHigh Pressure Pumps, 3000 psi and above
Max FluidAir Pump Air Motor Fluid Flow @ 60 cpm Outlet PressureMotor Ratio Diameter gpm (lpm) psi (bar, MPa)Merkur 30:1 6.3 in (16.0 cm) 1.6 (6.0) 3000 (210, 21.0)Merkur 40:1 6.3 in (16.0 cm) 1.1 (4.2) 4000 (250, 25.0)President 46:1 4.25 in (10.8 cm) 0.58 (2.2) 4600 (317, 31.7)
Max FluidHydraulic Pump Fluid Flow @ 60 cpm Outlet PressureMotor Ratio gpm (lpm) psi (bar, MPa)Viscount II 3.0:1 3.75 (14.2) 4500 (310, 31.0)Viscount II 3.5:1 3.3 (12.4) 5000 (345, 34.5)
124
3
F IN I SH ING EQU IPMENT ❚ HIGH PRESSURE PUMPS
Features and Benefits• Low pulsation output for better finish with consistent
pattern and film
• High flow rate delivery provides more speed and multiplegun capabilities
• All stainless steel pump construction; handles a wide range of fluids
• Extremely quiet air motor for comfortable working conditions
Typical Applications• Air-assisted wood finishing supply pumps
• Air-assisted general metal finishing supply pumps
• Wood furniture and cabinetry finishing applications
• General metal finishing applications
Typical Fluids Handled• Catalyzed lacquers
• Waterborne lacquers
• Shear-sensitive coatings
Merkur 40:1233822
Smooth changeover,
quiet operation
air motor
High flow rate
delivery lower
pump
Low pulsation,
smooth delivery,
2-ball piston pump
Merkur™ 40:1Pneumatic 2-Ball Piston Pumps
125
3
HIGH PRESSURE PUMPS ❚ F IN I SH ING EQU IPMENT
Merkur 40:1Pneumatic 2-Ball Piston Pump
Technical SpecificationsMaximum fluid outlet pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4000 psi (276 bar, 27.6 MPa)
Maximum air input pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115 psi (7 bar, 0.7 MPa)
Fluid flow @ 60 cpm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.1 gpm (4.2 lpm)
Volume per cycle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2.4 oz (70 cc)
Air consumption @ 100 psi (7 bar, 0.7 MPa) @ 20 cpm . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16 scfm (0.45 m3/min)
Sound level @ 100 psi @ 20 cpm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .76 dBA (7 bar, 0.7 MPa)
Air motor inlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1/4 npt(m) or 3/8 BSPP(m)
Pump fluid inlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3/4 npt(m) or M26 x 1.5 (f)
Pump fluid outlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3/8 npt(m) or 3/8 BSPP(f)
Weight, bare pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32 lbs (14 kg)
Instruction manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .309462
Note: 30:1 HF is “High Flow” as it delivers 1.6 gpm (6.0 lpm) at 60 cpm.
FLU
ID O
UTL
ET P
RES
SUR
E ps
i (ba
r, M
Pa)
AIR
CO
NSU
MPT
ION
scf
m (
m3 /m
in)
4000(276, 13.8)
3000 (207, 20.7)
2000 (138, 13.8)
1000 (69, 6.9)
0
80(2.3)
60(1.7)
40(1.1)
20(0.6)
0gpm 0 0.5 1 1.5 2(lpm) (1.9) (3.8) (5.7) (7.6)
FLUID FLOW(Pump tested in No. 10 Wt. Oil)
A
BC
D
A
B
C
D
27 54 81 108
CYCLES PER MINUTE
AIR PRESSURES LEGEND
A = @ 100 psi (7 bar, 0.70 MPa) Air Consumption
B = @ 90 psi (6.2 bar, 0.62 MPa) Fluid Flow
C = @ 70 psi (4.8 bar, 0.48 MPa)
D = @ 40 psi (2.8 bar, 0.28 MPa)
Performance Chart for Merkur 40:1
126
3
F IN I SH ING EQU IPMENT ❚ HIGH PRESSURE PUMPS
Merkur 40:1Pneumatic 2-Ball Piston Pump
Merkur 40:1 Merkur 40:1
Pump Part No. 233822 233756
Thread Design npt BSPP
Air Motor 245355 245355
Lower Displacement 245353 245353
Pump Construction SST SST
Piston Seal UHMWPE/ UHMWPE/
Construction PTFE PTFE
Throat Seal UHMWPE/ UHMWPE/
Construction PTFE PTFE
Replacement Parts Ordering Information
Air Valve Repair Kit 233836 233836
Air Motor Seal Repair Kit 233842 233842
Air Motor Piston Rod Kit 233838 233838
Standard Seal Repair Kit 233830 233830
Construction UHMWPE/ UHMWPE/
PTFE PTFE
Displacement Rod 15A120 15A120
Construction SST SST
Note: BSPP is British Standard Pipe Parallel thread.npt is National Pipe Taper thread.
TI1863A
TI1929A
TI1929ATI1929A
13.2 cm(5.2)
21.4 cm(8.4)
34.2 cm(13.5)
55.6 cm(21.9)
27.0 cm(10.6)
Ordering Information1. Select npt or BSPP pump thread design based on system piping requirements. 2. Order part number. *Pump part number includes motor and lower displacement pump.
127
3
HIGH PRESSURE PUMPS ❚ F IN I SH ING EQU IPMENT
Merkur 40:1Pneumatic 2-Ball Piston Pump
Accessories245724 Siphon Hose and Strainer
Fits up to 8 gal (30 liter) container.
245737 Siphon Hose and StrainerFits up to 55 gal (200 liter) container.
233888 Pump Inlet Elbow Swivel, Stainless SteelUse to connect siphon hose to pump inlet. M26(m) x 22 mm tube fittings.Use with siphon hose 245724 or 245737.
245681 Pump Inlet Adapter, Stainless Steel3/4 npt(m) x M26(m)
243340 Pail Cover with AgitatorUse to agitate material in a 5 gal (18.9 l) pail.
238890 Fluid Regulator, Stainless SteelMaximum working pressure: 6000 psi (420 bar, 42 MPa). Regulator range: 500-3000 psi (24-207 bar, 2.4-20.7 MPa).
238890 Fluid Regulator, Stainless SteelMaximum working pressure: 6000 psi (420 bar, 42 MPa). Regulator range: 500-3000 psi (24-207 bar, 2.4-20.7 MPa).
223160 Pump Outlet Fluid Filter, Stainless Steel60 mesh (250 micron), 5000 psi (350 bar, 35 MPa), 3/8 npt (f) inlet, 1/4 npt (f) outlet.
238435 Replacement Filter Screen Element3-pack elements, 30 mesh, SST
238437 Replacement Filter Screen Element3-pack elements, 60 mesh, SST
234083 Pump Outlet Adapter, Stainless Steel3/8 npt(m) x 3/8 BSPP(m)
245718 Pump Air Inlet Adapter1/4 npt(m) x 15.5 mm diameter
245682 Pump Air Inlet Adapter3/8 BSPP(m) x 15.5 mm diameter
15A724 Pump Repair ToolUse to disassemble lower displacement pump.
Additional Lower Displacement Pump245640 Lower Displacement Pump
70 cc/cycle (2.4 oz/cycle) delivery. PTFE/Leather throat packings, UHMWPE/PTFE piston packings.
128
3
F IN I SH ING EQU IPMENT ❚ HIGH PRESSURE PUMPS
Features and Benefits• Reliable President air motor provides low maintenance
operation
• Positive displacement, 2-ball piston design provides uniform and easily controlled delivery
• Stainless steel pump handles a wide range of fluids,including catalyzed materials
Typical Applications• Air-assisted and airless spray finishing
• High pressure supply pumping
• Fabricated metal products
Fluids Handled• Waterborne coatings
• Solventborne coatings
• Acid-catalyzed materials
• High solids coatings
• Plural component fluids
• Primers
• Sealant and low viscosity adhesives
President 46:1239140
Reliable President air motor
Proven and durable 2-ball piston pump
Stainless steel lower pump
President® 46:1Pneumatic 2-Ball Piston Pumps
129
3
HIGH PRESSURE PUMPS ❚ F IN I SH ING EQU IPMENT
President 46:1Pneumatic 2-Ball Piston Pumps
Technical SpecificationsPump ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46:1
Maximum fluid outlet pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4600 psi (317 bar, 31.7 MPa)
Maximum air input pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 psi (7 bar, 0.7 MPa)
Fluid flow at 60 cpm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.58 gpm (2.2 lpm)
Volume per cycle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.2 oz. (36 cc)
Air consumption at 100 psi (7 bar, 0.7 MPa) air @ 20 cpm . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 scfm (0.28 m3/min)
Sound pressure level at 100 psi (7 bar, 0.7 MPa) air @ 20 cpm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81 dBA
Air motor inlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/2 npt(f)
Pump fluid inlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3/4 npt(m)
Pump fluid outlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3/8 npt(f)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 lb. (11 kg)
Instruction manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .307619
FLU
ID O
UTL
ET P
RES
SUR
E ps
i (ba
r, M
Pa)
AIR
CO
NSU
MPT
ION
scf
m(m
3 /min
)
5000 (276, 27.6)
4000 (207, 20.7)
3000 (138, 13.8)
1000 (7, 7.0)
2000 (69, 6.9)
0
40(1.1)
32(0.9)
24(0.7)
8(0.2)
16(0.5)
0
A
B
C
gpm 0 0.2 0.4 0.6 0.8(lpm) (0.8) (1.5) (2.3) (3.0)
21 41 62 82
CYCLES PER MINUTE
FLUID FLOW(Pump tested in No. 10 Wt. Oil)
C
B
A
AIR PRESSURES LEGEND
A = @ 100 psi (7.0 bar, 0.7 MPa) Air Consumption
B = @ 70 psi (4.8 bar, 0.5 MPa) Fluid Flow
C = @ 40 psi (2.8 bar, 0.3 MPa)
14.8 in (376 mm)
Air motor inlet1/2 npt(f)
Fluid inlet3/4 npt(m)
31.6 in(802 mm)
16.8 in(426 mm)
Performance Chart for President 46:1 Pump Dimensions
Fluid outlet3/8 npt(f)
130
3
F IN I SH ING EQU IPMENT ❚ HIGH PRESSURE PUMPS
President 46:1Pneumatic 2-Ball Piston Pumps
Ordering InformationPump part number includes motor and lower displacement pump.
President 46:1
Pump part number 239140
Air motor 207352
Lower displacement pump 239145
Construction SST
Seal construction 2 PTFE/2 Leather
Replacement Parts Ordering InformationAir motor repair kit 207385
Standard seal repair kit 235636
Construction 2 PTFE/2 Leather
Optional seal repair kit 223674
Construction 2 UHMWPE/2 Leather
Optional seal repair kit 236724
Construction 4 PTFE
Optional seal repair kit 239328
Construction 4 Leather/1 PTFE
Optional seal packings 243615/243616
Construction Tuff-Stack
Displacement rod 223603
Construction SST
Housing sleeve 178898
Construction SST
Note: Tuff-Stack part numbers 243615 and 243616 sold as 12-count convenience pack.
The following lower displacement pump is not offered in acomplete President 46:1 pump assembly. To configure acomplete carbon steel President 46:1 pump with thislower:1. Order lower displacement pump 223595.
2. Order President air motor 207352.
3. Order adapter 191995, cotter pin 101946 (qty 2), o-ring 154771, carbon steel tie rods 191996 (qty 3)and locknuts 101566 (qty 3).
Additional Lower Displacement PumpsLower displacement pump 223595
Material of Construction CS
Standard seal repair kit 239328
Construction 4 Leather/1 PTFE
Displacement rod 223603
Construction SST
Sleeve housing 178898
Construction SST
131
3
HIGH PRESSURE PUMPS ❚ F IN I SH ING EQU IPMENT
President 46:1Pneumatic 2-Ball Piston Pumps
Accessories207365 Wall Bracket
For mounting President pump to a wall.
205640 Pump Floor StandFor mounting a President pump in a suction feed system. Adapter 206108 is required.
243801 President Remote Exhaust Muffler KitKit allows for remote exhaust piping to be installed toPresident air motor exhaust port. Redirects noise andexhaust contaminants to a remote location. Kit includes air motor covers with 3/4 npt(f) exhaust post and corkgasket.
243421 President Muffler KitKit includes external muffler, plates and gaskets used inmuffler kit 243801. External muffler provides noise reduction to President air motor.
207579 Padded PliersFor servicing President air motor trip rod.
171818 Adjustment ToolA 0.145 in (3.7 mm) gauge used to ensure proper clearance between the poppets and the piston on thePresident air motor.
208259 Siphon Kit, Carbon SteelUse to siphon fluid from a 55 gal (200 l) drum. Includesnylon suction hose 214961, 3/4 in ID, 6 ft (1.8 m), 3/4 npt(f) swivel outlet fitting and bung adapter.
208920 Siphon Kit, AluminumUse to siphon fluid from a 5 gal (18.9 l) pail. Includesnylon suction hose 170706, 1 in ID, 4 ft (1.2 m) long, 3/4 npt(f) swivel outlet fitting and inlet stainer.
207484 Siphon Kit, AluminumUse to siphon fluid from a 5 gal (18.9 l) pail. Includesnylon suction hose 214960, 3/4 in ID, 3.5 ft (1.1 m)long, 3/4 npt(f) swivel outlet fitting.
132
3
F IN I SH ING EQU IPMENT ❚ HIGH PRESSURE PUMPS
Features and Benefits• PlasmaCoat™ rods and XtremeSeal™ packings more
than double the life of the pumps
• Clean, quick and efficient hydraulic power, up tothree times more energy efficient than comparablecompressed air systems
• Positive displacement, 2-ball piston design, providesuniform, easily controlled delivery
• Improved serviceability means fewer parts, fasterrepairs and lower overall maintenance and owner-ship costs
Typical Applications• Multiple airless gun supply pump in outdoor
portable applications
• Multiple airless gun supply pump in factoryoperations with limited compressed air supplies
Typical Fluids Handled• Solventborne paints
• Polyurethane top coats
• Epoxy primers
Viscount II 5000245168
Energy efficient Viscount II motorreduces energy costs
Double the life with PlasmaCoatrods and XtremeSeal packings
Xtreme pump lowerEase of serviceand repair
Viscount® II 4500 and 5000Hydraulic 2-Ball Piston Pumps
133
3
HIGH PRESSURE PUMPS ❚ F IN I SH ING EQU IPMENT
Viscount II 4500 and 5000Hydraulic 2-Ball Piston Pumps
Technical Specifications
Viscount II 4500 Viscount II 5000
Pump ratio 3.0:1 3.5:1
Maximum fluid outlet pressure 4500 psi 5000 psi
(310 bar, 31.0 MPa) (345 bar, 34.5 MPa)
Maximum hydraulic input pressure 1500 psi 1428 psi
(104 bar, 10.4 MPa) (98.5 bar, 9.8 MPa)
Fluid flow @ 60 cpm 3.75 gpm (14.2 lpm) 3.3 gpm (12.4 lpm)
Volume per cycle 8 oz. (250 cc) 7 oz. (220 cc)
Oil flow at 60 cpm 12 gpm (45 lpm) 12 gpm (45 lpm)
Sound pressure level @ 1500 psi (103 bar, 10.3 MPa)
oil @ 20 cpm 78 dBA 78 dBA
Hydraulic motor inlet 3/4 npt(f) 3/4 npt(f)
Hydraulic motor outlet 1 npt(f) 1 npt(f)
Pump fluid inlet 1 1/4 npt(m) 1 1/4 npt(m)
Pump fluid outlet 1 npt(f) 1 npt(f)
Weight 153 lb. (69 kg) 148 lb. (67 kg)
Instruction manual 309340 309340
Performance Charts for Viscount II 4500 Pump
Performance Charts for Viscount II 5000 Pump
FLU
ID O
UTL
ET P
RES
SUR
E ps
i (ba
r, M
Pa)
5000 (345, 34.5)
4000 (276, 27.6)
3000 (207, 20.7)
2000 (138, 13.8)
1000(69, 6.9)
0
A
B
C
Fluid flow gpm (lpm) 0 1 (3.8) 2 (7.6) 3 (11.4) 4 (15.1) 5 (18.9)Hydraulic flow gpm (lpm) 3.2 (12.1) 6.4 (24.2) 9.6 (36.3) 12.8 (48.4) 16 (60.5)
16 32 48 64 80
CYCLES PER MINUTE
FLUID FLOWPump tested in No. 10 Wt. Oil
INPUT HYDRAULIC PRESSURES
A = @ 1500 psi (103 bar, 10.3 MPa)
B = @ 1000 psi (69 bar, 6.9 MPa)
C = @ 571 psi (39 bar, 3.9 MPa)
FLU
ID O
UTL
ET P
RES
SUR
E ps
i (ba
r, M
Pa)
5000 (345, 34.5)
4000 (276, 27.6)
3000 (207, 20.7)
2000 (138, 13.8)
1000(69, 6.9)
0
A
B
C
Fluid flow gpm (lpm) 0 1 (3.8) 2 (7.6) 3 (11.4) 4 (15.1) 5 (18.9)Hydraulic flow gpm (lpm) 3.6 (13.6) 7.2 (27.2) 10.8 (40.8) 14.4 (54.4) 18 (68)
18 36 54 72 90
CYCLES PER MINUTE
FLUID FLOWPump tested in No. 10 Wt. Oil
INPUT HYDRAULIC PRESSURES
A = @ 1428 psi (98 bar, 9.8 MPa)
B = @ 1000 psi (69 bar, 6.9 MPa)
C = @ 571 psi (39 bar, 3.9 MPa)
134
3
F IN I SH ING EQU IPMENT ❚ HIGH PRESSURE PUMPS
Viscount II 4500 and 5000Hydraulic 2-Ball Piston Pumps
Ordering Information
Pump part number includes motor and lower displacement pump.Viscount II 4500 Viscount II 5000
Pump part number 245180 245168
Hydraulic motor/reciprocator 235345 235345
Lower displacement pump 244416 244414
Construction CS CS
Fluid filter configuration No Filter No Filter
Piston seal construction 3 XtremeSeal/2 Leather 3 XtremeSeal/2 Leather
Throat seal construction 3 XtremeSeal/2 Leather 3 XtremeSeal/2 Leather
Replacement Parts Ordering InformationHydraulic motor repair kit 223654 223654
Standard seal and ball kit 244853 244852
Construction 3 XtremeSeal/2 Leather 3 XtremeSeal/2 Leather
Optional seal kit 244903 244902
Construction 5 Tuff-Stack 5 Tuff-Stack
Optional piston seal packings 245230 244872
Construction Leather (10 pack) Leather (10 pack)
Optional piston seal packings 245231 244866
Construction XtremeSeal (10 pack) XtremeSeal (10 pack)
Optional piston seal packings 245229 244860
Construction Tuff-Stack (10 pack) Tuff-Stack (10 pack)
Optional throat seal packings 245230 244871
Construction Leather (10 pack) Leather (10 pack)
Optional throat seal packings 245231 244865
Construction XtremeSeal (10 pack) XtremeSeal (10 pack)
Optional throat seal packings 245229 244859
Construction Tuff-Stack (10 pack) Tuff-Stack (10 pack)
Standard displacement rod 197323 197322
Construction SST/PlasmaCoat SST/PlasmaCoat
Optional displacement rod 198417 198416
Construction SST/Chrome SST/Chrome
Standard cylinder 197318 197317
Construction SST/Chrome SST/Chrome
Note: Optional throat and piston packings sold as 10-count convenience pack.
135
3
HIGH PRESSURE PUMPS ❚ F IN I SH ING EQU IPMENT
Viscount II 4500 and 5000Hydraulic 2-Ball Piston Pumps
Ordering Information, continuedThe following lower displacement pumps are not offered in complete Viscount II pump assemblies. To configure a complete Viscount II 4500 or Viscount II 5000 pump with these lowers:
1. Select lower displacement pump construction (carbon steel or stainless steel) based on the corrosive and chemical characteristics of the fluid to be handled.
2. For carbon steel Xtreme lowers, select desired fluid filter configuration (built-in fluid filter in outlet housing or no fluid filter, standard outlet housing).
3. Select appropriate seal construction based on the chemical characteristics of the fluid to be handled.
4. Order Viscount II hydraulic motor/reciprocator 235345.
5. For Viscount II Xtreme carbon steel pumps, order connection kit 244849. For Viscount II Dura-Flo stainless steel pumps,order adapter 190287, coupling collars 184129 (qty 2), coupling nut 186925, carbon steel tie rods 184596 (qty 3) and hexnuts 106166 (qty 3).
Additional Lower Displacement PumpsLower displacement pump 244417 244423 244422 244415 236897 236470Description Viscount II 4500 Viscount II 4500 Viscount II 5000 Viscount II 5000 Viscount II 5000 Viscount II 5000
Lower Xtreme Lower Xtreme Lower Xtreme Lower Xtreme Lower Dura-Flo Lower Dura-Flo
Material of construction CS CS CS CS SST SST
Fluid filter configuration Built-In-Filter No Filter No Filter Built-In-Filter No Filter No Filter
Standard seal and ball kit 244853 244903 244902 244852 237173 237172
Construction 3 XtremeSeal/2 Leather 5 Tuff-Stack 5 Tuff-Stack 3 XtremeSeal/2 Leather 5 PTFE 3 Leather/2 PTFE
Standard displacement rod 197323 197323 197322 197322 189316 189316
Construction SST/PlasmaCoat SST/PlasmaCoat SST/PlasmaCoat SST/PlasmaCoat SST/Chrome SST/Chrome
Standard cylinder 197318 197318 197317 197317 189383 189383
Construction SST/Chrome SST/Chrome SST/Chrome SST/Chrome SST/Chrome SST/Chrome
136
3
F IN I SH ING EQU IPMENT ❚ HIGH PRESSURE PUMPS
Viscount II 4500 and 5000Hydraulic 2-Ball Piston Pumps
Accessories206221 Wall Bracket
For mounting a Viscount II pump to a wall.
169236 Hydraulic Oil5 gal (18.9 l) size container.
102644 Shut-off Valve, BallFor hydraulic supply or return line; 3/4 npt(fbe),3000 psi.
102646 Shut-off Valve, BallFor hydraulic supply or return line; 1/2 npt(fbe), 3000 psi.
208920 Siphon Kit, AluminumUse to siphon fluid from a 5 gal (18.9 l) pail. Includes nylon suction hose 170706, 1 in ID, 4 ft (1.2 m) long, 3/4 npt(f) swivel outlet fitting.
207484 Siphon Kit, AluminumUse to siphon fluid from a 5 gal (18.9 l) pail. Includesnylon suction hose 214960, 3/4 in ID, 3.5 ft (1.1 m)long, 3/4 npt(f) swivel outlet fitting.
208259 Siphon Kit, Carbon SteelUse to siphon fluid from a 55 gal (200 l) drum. Includesnylon suction hose 214961, 3/4 in ID, 6 ft (1.8 m) long, 3/4 npt(f) swivel outlet fitting and bungadapter.
112265 Carbide Piston BallUse as a replacement piston ball for Viscount II 5000pump in exceptionally abrasive coatings. Diameter: 7/8 in(22 mm).
244849 Connection Kit, XtremeKit to install lower displacement pump under existingViscount II motor/reciprocator. Includes tie rods and otherconnecting hardware. Use with lower displacement pumps244414, 244422 and 244415.
236054 Siphon Tube, Carbon SteelUse to siphon fluid from a 55 gal (200 l) drum. Includesnylon suction hose 109105, 3/4 in ID, 6 ft (1.8 m) long, 1-1/2 npt(m) outlet fitting.
245132 Floor Stand Kit, XtremeUse to mount Viscount II 4500 and 5000 pumps to thefloor. Includes 222274 floor stand, 198347 intake adapterand ball valve.
245136 55 Gallon Suction Tube Extension, XtremeIncludes 195151 intake tube and 114967 coupling toextend standard suction tube to bottom of 55 gal (200 l) drum. Connects to suction tube 197682.
197682 Suction Tube, Aluminum, XtremeConnect with suction hose to siphon material from 5 gal (18.9 l) pail container. 1 npt(f) outlet fitting.
245176 Suction Kit, Xtreme, Carbon SteelIncludes 197682 suction tube, 244516 1 in suction hose,6 ft (1.8 m), Quick Disconnect fitting and elbow.
245131 Ram Adapter, XtremeUse to mount Viscount II 4500 and 5000 pumps to aram. Includes 1-1/2 npt(f) x flange and lug kit.
222916 Suction Kit, Carbon SteelConnect to pump fluid inlet to draw fluid from 55 gal (200 l) drum. Includes 1-1/2 in suction tube,222914 polyethylene hose, 1-1/2 inch ID, 8 ft (2.4 m)length and 2 npt(m) street elbow outlet fitting.
26.10 in(663 mm)
49.6 in(1260 mm)
Fluid Inlet:1-1/4 npt(m)
Fluid Outlet:1 npt(f)
Hydraulic Inlet:3/4 npt(f)
23.5 in(597 mm)
Dimensions for Viscount II 4500 and 5000 Pumps
Hydraulic Outlet:1 npt(f)
137
4
INDEX ❚ F IN I SH ING EQU IPMENT
Index
102644 . . . . . . . . . . . . . . . . . . .50, 63, 111, 117, 136102646 . . . . . . . . . . . . . . . . . . .50, 63, 111, 117, 136102969 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18, 121107411 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67109507 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .107, 117109508 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .107, 117110335 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44, 50112265 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .136112887 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .98, 107114937 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66115408 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .72116228 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66165609 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82166067 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33168085 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23, 83168513 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .98, 107169236 . . . . . . . . . . . . . . . . . . .50, 63, 111, 117, 136169504 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23, 82171818 . . . . . . . . . . . . . . . . . . . . . .23, 29, 44, 78, 83171818 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .131177217 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67177218 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67177219 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67177721 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23, 28178779 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67178895 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82178898 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77, 130178902 . . . . . . . . . . . . . . . . . . . . . . . . . . .77, 82, 110180497 . . . . . . . . . . . . . . . . . . . . . . . . . . . .55-56, 61180498 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56180499 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55, 62180529 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57, 63180954 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23, 28181269 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33, 115181898 . . . . . . . . . . . . . . . . . . . . . . . . . .40-43, 48-49181899 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40-41181900 . . . . . . . . . . . . . . . . . . . . . . . . . . . .42-43, 48183032 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40183047 . . . . . . . . . . . . . . . . . . . . . . . . . . . .40, 43, 49183048 . . . . . . . . . . . . . . . . . . . . . . . . .40, 42-43, 48183049 . . . . . . . . . . . . . . . . . . . . . . . . . . . .41-43, 49184002 . . . . . . . . . . . . . . . . . . . . . .103, 105, 115-116184003 . . . . . . . . . . . . . . . . . . . . . .103, 105, 115-116184276 . . . . . . . . . . . . . . . . . . . . . . . . . .106, 115-116184278 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .107, 117184461 . . . . . . . . . . . . . . . . . . . . . . . . . .106, 115-116184487 . . . . . . . . . . . . . . . . . . . . . . .96-97, 103, 106184503 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96184540 . . . . . . . . . . . . . . . . . . . . . . .96-97, 103, 106184545 . . . . . . . . . . . . . . . . . . . . . . . . . .98, 107, 117185197 . . . . . . . . . . . . . . . . . . . . . . . . . .55-56, 61-62185649 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23, 28185650 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23, 28186986 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23, 82186994 . . . . . . . . . . . . . . . . . . . . . . . . . . .23, 82, 110186997 . . . . . . . . . . . . . . . . . . . . . . . . . . .23, 82, 110189305 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50, 111189316 . . . . . . . . . . . . . . . . . . .96, 97, 104, 106, 135189383 . . . . . . . . . . . . . . . . . . .96, 97, 104, 106, 135189432 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
189433 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .121189434 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .121190172 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96193424 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57, 63194248 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23, 29194756 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .72194760 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .72196228 . . . . . . . . . . . . . . . . . . . . . . . . . .55-56, 61-62196321 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57, 63197317 . . . . . . . . . . . . . .96, 97, 104, 106, , 134, 135197318 . . . . . . . . . . . . . . . . . . . . .104, 106, 134, 135197319 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96-97197322 . . . . . . . . . . . . . . . . . . .96-97, 104, 106, 134197323 . . . . . . . . . . . . . . . . . . . . .104, 106, 134, 135197324 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96-97197426 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12197682 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .98, 107197682 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .136198416 . . . . . . . . . . . . . . . . . . . . . . . . . .96, 104, 134198417 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .104, 134198418 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96204385 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18, 121205038 . . . . . . . . . . . . . . . . . . . . . . . . .28, 40-42, 82205640 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .131205700 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .83205997 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23206184 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82206220 . . . . . . . . . . . . . . . . . . . . . . . . . . .23, 29, 83206221 . . . . . .18, 33, 44, 50, 98, 107, 117, 121, 136206418 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33206451 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33206452 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33206453 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33206728 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23, 77206734 . . . . . . . . . . . . . . . . . . . . . . . . . .33, 103, 104206796 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33206897 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82206931 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33206955 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23207321 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33207349 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33207352 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82, 130207365 . . . . . . . . . . . . . . . . . . . .23, 78, 83, 111, 131207385 . . . . . . . . . . . . . . . . . . . . .28, 40-42, 82, 130207484 . . . . . . . . . . . . . . . . . . . . . . . . . . . .23, 29, 33207484 . . . . . . . . . . . . . . . .78, 83, 111, 117, 131, 136207579 . . . .23, 29, 33, 44, 57, 78, 83, 98, 107, 131207727 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67207730 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55-56208259 . .18, 23, 29, 78, 83, 111, 117, 121, 131, 136208356 . . . . . . . . . . . . . . . . . . . . . . . . . .33, 103, 104208520 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23, 82208920 . . . . . .15, 23, 29, 78, 83, 111, 117, 131, 136210004 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23210007 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28210208 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115210313 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115213049 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67215225 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43215255 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43, 55
215363 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77215906 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43, 55217222 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .110217478 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33, 115217529 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82217540 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96217580 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82218028 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44218077 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .110218122 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96218210 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .110218631 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67218634 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67218742 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57, 63218746 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23, 28218747 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28218757 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23, 28218763 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23218795 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28218956 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23220106 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55-56220266 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67220384 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57220385 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57, 63220396 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82220465 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23220465 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82220560 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40220561 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40220562 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40220563 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40220564 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41220565 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42220567 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42220568 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43220570 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42220571 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42-43220577 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43220578 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43220581 . . . . . . . . . . . . . . . . . . . . . . . . . . . .29, 44, 50220581 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .98, 111220587 . . . . . . . . . . . . . . . . . . . . . .40, 42-43, 48-49220588 . . . . . . . . . . . . . . . . . . . . . . . . .42-43, 48-49220589 . . . . . . . . . . . . . . . . . . . . . . . . .41-42, 48-49220656 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18, 121220658 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18220660 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .121220663 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18220664 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .121220665 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .121220666 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18220667 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .121220668 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .121220916 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42-43220927 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23, 28220949 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18220950 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .121221075 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82221080 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .110221104 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
Part No. Page No. Part No. Page No. Part No. Page No.
138
4
F IN I SH ING EQU IPMENT ❚ INDEX
221134 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18, 121221135 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .121221136 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .121221159 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44, 50222121 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .88, 92222649 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57, 63222780 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .107, 117222791 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77222796 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115222801 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .103, 115222803 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .103, 115222805 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106, 115222826 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .103222827 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .103222834 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115222845 . . . . . . . . . . . . . . . . . . . . . . . . . .106, 115-116222846 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115-116222847 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115222848 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115222849 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115222875 . . . . . . . . . . . . . . . . . . . . . .103, 105, 115-116222876 . . . . . . . . . . . . . . . . . . . . . .103, 105, 115-116222877 . . . . . . . . . . . . . . . . . . . . . .103, 105, 115-116222878 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .103, 115222879 . . . . . . . . . . . . . . . . . . . . . .103, 105, 115-116222880 . . . . . . . . . . . . . . . . . . . . . .103, 105, 115-116222892 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115222897 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115222900 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115222916 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33222916 . . . . . . . . . . . . . . . . . . . . . . . . . .98, 107, 136222976 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .117222988 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .116222991 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105, 116222992 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105, 116222993 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105, 116222994 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105, 116223160 . . . . . . . . . . . . . . . . . . . . . . . . . . .88, 92, 127223160 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .127223177 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23223183 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28223184 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28223185 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23223186 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23223319 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18, 121223320 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23223321 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23, 28223439 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115223586 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82223587 . . . . . . . . . . . . . . . . . . . . . . . . . . .77, 82, 110223589 . . . . . . . . . . . . . . . . . . . . . . . . . . .77, 82, 110223595 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77, 130223596 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77223603 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77223603 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .130223646 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61-62223654 . . . . . . . . . . . . . . . . . . . . . . .61-62, 115, 134223674 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77223674 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .130223675 . . . . . . . . . . . . . . . . . . . . . . . . . . .77, 82, 110
223706 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67223707 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67223708 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67223709 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67223710 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67223711 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67223712 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67223713 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67223714 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67223806 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67223807 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67223808 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67223809 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67223810 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67223811 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67223812 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67223813 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67223814 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67223842 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77, 82223843 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82223844 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77223906 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67223907 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67223908 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67223909 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67223910 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67223911 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67223912 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67223913 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67223914 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67224006 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67224007 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67224008 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67224009 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67224010 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67224011 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67224012 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67224013 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67224014 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67224040 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15224106 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67224107 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67224108 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67224109 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67224110 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67224111 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67224112 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67224113 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67224114 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67224206 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67224207 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67224208 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67224209 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67224210 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67224211 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67224212 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67224213 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67224214 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67224341 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23, 82224342 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82
224343 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23224344 . . . . . . . . . . . . . . . . . . . . . . . . . . .23, 82, 110224345 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23224346 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82224347 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82224348 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82224349 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82224350 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23224401 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23, 82224402 . . . . . . . . . . . . . . . . . . . . . . . . . . .23, 82, 110224403 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23, 82224404 . . . . . . . . . . . . . . . . . . . . . . . . . . .23, 82, 110224443 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33, 115224889 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23, 82224934 . . . . . . . . . . . . . . . . . . . . . . . . . . . .41-43, 48224935 . . . . . . . . . . . . . . . . . . . . . . . . .40, 42-43, 48224936 . . . . . . . . . . . . . . . . . . . . . . . . .40, 42-43, 48233077 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43, 55233500 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12233501 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12233750 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15233751 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15233752 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87233753 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87233754 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87233755 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87233756 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .126233776 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12233777 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12233818 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87233819 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87233820 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87233821 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87233822 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .126233826 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87233830 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87, 126233833 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87233836 . . . . . . . . . . . . . . . . . . . . . . . . . . .87, 91, 126233837 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87233838 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87, 126233842 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87, 126233888 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .88, 127234041 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .91234042 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .91234043 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .91234044 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .91234045 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .91234046 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .91234047 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .91234048 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .91234049 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .91234083 . . . . . . . . . . . . . . . . . . . . . . . . . .88, 92, 127234084 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .91234085 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .91234087 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .91234089 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .91234091 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .91234093 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .91235345 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115, 134235414 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .107
Index
Part No. Page No. Part No. Page No. Part No. Page No.
139
4
INDEX ❚ F IN I SH ING EQU IPMENT
235417 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .98, 107235525 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55-56235634 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82235635 . . . . . . . . . . . . . . . . . . . . . . . . . . .77, 82, 110235636 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77, 130235854 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55, 61235855 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56235856 . . . . . . . . . . . . . . . . . . . . . . . . . . . .55-56, 62236054 . . . . . . . . . . . . . . . .23, 44, 50, 98, 107, 136236226 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105, 116236230 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105, 116236417 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48236470 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .104, 135236490 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .97, 106236601 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48236602 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48236605 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48236606 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48236615 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67236698 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48236712 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48236713 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48236714 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50236715 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67236724 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77, 130236897 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .97, 106236897 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .135237008 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18237009 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .121237010 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .121237011 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18237012 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .121237013 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .121237014 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18237015 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67237016 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .121237017 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .121237068 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33237140 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28237141 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28237142 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28237143 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28237144 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28237145 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28237146 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28237172 . . . . . . . . . . . . . . . . . . . . . . . . . .96, 104, 135237173 . . . . . . . . . . . . . . . . . . .96-97, 104, 106, 135237174 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96, 104237178 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96, 103237179 . . . . . . . . . . . . . . . . . . . . . . . .96-97, 103, 106237180 . . . . . . . . . . . . . . . . . . . . . . .96-97, 103, 106237193 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23, 28237194 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23, 28237197 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23, 28237198 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23, 28237199 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28237200 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23, 28237222 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41237223 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41237234 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96
237236 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96237238 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96237280 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96237287 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .104237514 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .103237515 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .97, 106237516 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .103237517 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96237579 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18237579 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .121237609 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96237710 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96, 104237713 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96, 103237725 . . . . . . . . . . . . . . . . . . . . . . . . . . .77, 82, 110237744 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57, 63237781 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .98, 107237782 . . . . . . . . . . . . . . . . . . . . . . . . . .98, 107, 117237949 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18, 121237958 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77238435 . . . . . . . . . . . . . . . . . . . . . . . . . . .88, 92, 127238437 . . . . . . . . . . . . . . . . . . . . . . . . . . .88, 92, 127238563 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .73238890 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .88238890 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .127238909 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15239140 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .130239145 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77, 130239326 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82239327 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77239328 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77, 130239805 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44, 50239833 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48239834 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42, 48239835 . . . . . . . . . . . . . . . . . . . . . . . . . . . .42-43, 48239836 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48239837 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43, 48239838 . . . . . . . . . . . . . . . . . . . . . . . . .40, 42-43, 48239854 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41239855 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41239859 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48239860 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41239865 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44, 50239866 . . . . . . . . . . . . . . . . . . . . . . . . . . . .40-43, 48239867 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44, 50239868 . . . . . . . . . . . . . . . . . . . . . . . . . . . .40-43, 48239869 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44, 50239872 . . . . . . . . . . . . . . . . . . . . . . . . .40-43, 48-49240606 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43, 49240607 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43, 49240608 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43, 49240609 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43, 49240610 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42, 49240611 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42, 49240612 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43, 49240613 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43, 49240618 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42240619 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42240625 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43240626 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43241504 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .72
241505 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .72241516 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .72241594 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .72241595 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .72241597 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .73241644 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .73241646 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .73241648 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105, 116241804 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .73241827 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .72241828 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .73241829 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .73241830 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .72241833 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .72241834 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .72241884 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .72241953 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23, 78241956 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .116243152 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15243153 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15243154 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15243155 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15243156 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15243340 . . . . . . . . . . . . . . . . . . . . . . .73, 88, 92, 127243421 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29, 44243421 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .83, 131243594 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .73243606 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .73243615 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77243615 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .130243616 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77, 130243620 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82243621 . . . . . . . . . . . . . . . . . . . . . . . . . . .77, 82, 110243622 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23, 82243623 . . . . . . . . . . . . . . . . . . . . . . . . . . .23, 82, 110243624 . . . . . . . . . . . . . . . . . . . . . . . . . . .23, 82, 110243625 . . . . . . . . . . . . . . . . . . . . . . . . . . .23, 82, 110243663 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77, 82243664 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82243667 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57, 63243671 . . . . . . . . . . . . . . . . . . . . . . . . . .55-56, 61-62243672 . . . . . . . . . . . . . . . . . . . . . . . . .55-56, 61-62243673 . . . . . . . . . . . . . . . . . . . . . . . . .55-56, 61-62243687 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77, 82243705 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57, 63243706 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57, 63243707 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57, 63243727 . . . . . . . . . . . . . . . . . . . . . . . . . . . .55-56, 62243728 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56243729 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56, 61243731 . . . . . . . . . . . . . . . . . . . . . . . . . . . .55-56, 62243732 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56, 61243733 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56, 61243734 . . . . . . . . . . . . . . . . . . . . . . . . . . . .55-56, 62243735 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56, 61243736 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55, 61243737 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55243738 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56243739 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56243740 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62
Index
Part No. Page No. Part No. Page No. Part No. Page No.
140
4
F IN I SH ING EQU IPMENT ❚ INDEX
243741 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61243742 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61243743 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55243744 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55243745 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56243746 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56243747 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56243748 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56243749 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55243750 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55243751 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62243752 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62243753 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61243754 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61243755 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61243756 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61243763 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57, 63243764 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57, 63243765 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57, 63243771 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55, 62243772 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61243773 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61243801 . . . . . . . . . . . . . . . . . . . . . . . .29, 44, 83, 131243948 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57, 63244142 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48244414 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .104, 134244415 . . . . . . . . . . . . . . . . . . . . . . . . . .97, 106, 135244416 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .104, 134244417 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106, 135244418 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96244419 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .97244422 . . . . . . . . . . . . . . . . . . . . . . . . . .97, 106, 135244423 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106, 135244424 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .97244527 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .98, 107244530 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .98, 107244849 . . . . . . . . . . . . . . . . . . . . . . . . . .98, 107, 136244852 . . . . . . . . . . . . . . .96-97, 104, 106, 134-135244853 . . . . . . . . . . . . . . . . . . . . .104, 106, 134-135244854 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96-97244857 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96244859 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96, 104244859 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .134244860 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96, 104244860 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .134244861 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96244862 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96244863 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96244865 . . . . . . . . . . . . . . . . . . . . . . . . . .96, 104, 134244866 . . . . . . . . . . . . . . . . . . . . . . . . . .96, 104, 134244867 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96244868 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96244869 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96244871 . . . . . . . . . . . . . . . . . . . . . . . . . .96, 104, 134244872 . . . . . . . . . . . . . . . . . . . . . . . . . .96, 104, 134244873 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96244874 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96244902 . . . . . . . . . . . . . . .96-97, 104, 106, 134-135244903 . . . . . . . . . . . . . . . . . . . . .104, 106, 134-135244904 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96-97
245065 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12245066 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12245067 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12245068 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12245082 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12245083 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12, 73245084 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12245085 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12, 73245116 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .104245131 . . . . . . . . . . . . . . . . . . . . . . . . . .98, 107, 136245132 . . . . . . . . . . . . . . . . . . . . . . . . . .98, 107, 136245136 . . . . . . . . . . . . . . . . . . . . . . . . . .98, 107, 136245166 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96245167 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .104245168 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .134245169 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96245176 . . . . . . . . . . . . . . . . . . . . . . . . . .98, 107, 136245180 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .134245229 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .104, 134245230 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .104, 134245231 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .104, 134245352 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87245353 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .126245354 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87245355 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .126245639 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .88245640 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .88, 127245641 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .88245681 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .88, 127245682 . . . . . . . . . . . . . . . . . . . . . . . . . .88, 92, 127245718 . . . . . . . . . . . . . . . . . . . . . . . . . . .88, 92, 127245724 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .88, 127245737 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .88, 127245874 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15245875 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15245934 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .91245935 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .91246300 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .92246301 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .92246323 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .88246324 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .88246325 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .88246448 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .92246449 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .92249103 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67249104 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67249105 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67249106 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67249107 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67249108 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67276788 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .103512150 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50, 63515258 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50, 111516731 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66516732 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66516774 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66516775 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66516776 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66516821 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66516822 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66
516823 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66516824 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66516825 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66516826 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66516828 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66521429 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66521441 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66521454 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66521455 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66521456 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66521466 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66521467 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66521468 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66521470 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66521888 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66616637 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67685954 . . . . . . . . . . . . . . . . . . . . . . . . .55-56, 61-62685970 . . . . . . . . . . . . . . . . . . . . . . . . .40-43, 48-49685971 . . . . . . . . . . . . . . . . . . . . . . . . . . . .40-43, 49686499 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18686522 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55, 61686614 . . . . . . . . . . . . . . . . . . . . . . . . .40, 42-43, 48686615 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96686679 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43, 49687055 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .116687118 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115-116687119 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .103, 115687218 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96, 104687219 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96, 104953912 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6715A118 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8715A119 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8715A120 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87, 12615A724 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .88, 12715B013 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9115B015 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9115B525 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9215B526 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9215B527 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9215B528 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9215D787 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4315D788 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4115D789 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4351A649 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6651A650 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6651A651 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6651A652 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6651A653 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6651A654 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6651B157 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6651B296 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6651B297 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6651B299 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6651B300 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6651B301 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6651B302 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6651B778 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66C59703 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106, 116
Index
Part No. Page No. Part No. Page No. Part No. Page No.
P R O V E N Q U A L I T Y . L E A D I N G T E C H N O L O G Y .
Low, Medium and High Pressure Pumps
FIN
ISH
ING
FINISHING PUMPS BUYER’S GUIDE
ABOUT GRACO
P R O V E N Q U A L I T Y . L E A D I N G T E C H N O L O G Y .
Founded in 1926, Graco is a world leader in fluid handling systems and components. Graco productsmove, measure, control, dispense and apply a wide range of fluids and viscous materials used in vehiclelubrication, commercial and industrial settings.
The company’s success is based on its unwavering commitment to technical excellence, world-class manufacturing and unparalleled customer service. Working closely with qualified distributors, Gracooffers systems, products and technology which set the quality standard in a wide range of fluid handlingsolutions. Graco provides equipment for spray finishing, protective coating, paint circulation, lubrication, and dispensing sealants and adhesives, along with power application equipment for thecontractor industry. Graco’s ongoing investment in fluid management and control will continue to provideinnovative solutions to a diverse global market.
©2005 Graco Inc. Form No. 337045 Rev. A 8/05 Printed in U.S.A. All other brand names or marks are used for identification purposes and are trademarks of their respective owners.
Sales/Distribution/Service North AmericaIndustrial Customer Service 800-328-0211Industrial product Information/Demonstration1-877-84GRACO (1-877-844-7226)FAX 612-378-3597
Graco Inc. is registered to I.S. EN ISO 9001
GRACO HEADQUARTERS
All written and visual data contained in this document are based on the latest product information available at the time of publication. Graco reserves the right to make changes at any time without notice.
AMERICAS
MINNESOTAWorldwide HeadquartersGraco Inc.88-11th Avenue N.E.Minneapolis, MN 55413
MAILING ADDRESSP.O. Box 1441Minneapolis, MN 55440-1441Tel 612 623-6000Fax 612 623-6777
MICHIGANAutomotive Headquartersand Sales Office47800 Halyard DrivePlymouth, MI 48170Tel 734 416-3400Fax 734 416-3441
EUROPE
BELGIUMEuropean HeadquartersGraco N.V.Industrieterrein - Oude BundersSlakweidestraat 313630 Maasmechelen, BelgiumTel 32 89 770 700Fax 32 89 770 777
ASIA PACIFIC
JAPANGraco K.K.1-27-12 HayabuchiTsuzuki-kuYokohama City, Japan 2240025Tel 81 45 593 7300Fax 81 45 593 7301
CHINAGraco Hong Kong Ltd.Representative Office Room 118 1st FloorNo. 2 Xin Yuan BuildingNo. 509 Cao Bao RoadShanghai, P.R.China 200233Tel 86 21 649 50088Fax 86 21 649 50077
KOREAGraco Korea Inc.3rd Fl., Doorim Bldg.164-21 Poi-Dong, Kangnam-KuSeoul, Korea 135-260Tel 82 2 575-8901Fax 82 2 571-9422
GRACO INC.P.O. Box 1441Minneapolis, MN 55440-1441
Call today for product information or to request a demonstration.
1.877.84GRACO (1-877-844-7226) or visit us at www.graco.com.
PUM
PS