fingerp
-
Upload
kalyaniprathyu -
Category
Documents
-
view
217 -
download
0
Transcript of fingerp
8/3/2019 fingerp
http://slidepdf.com/reader/full/fingerp 1/5
Fingerprint Based Bank Locker System
full report
FINGERPRINT BASED BANK
LOCKER SYSTEM.doc (Size: 9.62
MB / Downloads: 151)
INTRODUCTION
1.1) OVERVIEW:
According ancient Greek scripts
BIOMETRICS means study of life.
Biometrics studies commonly include
fingerprint, face, iris, voice, signature,
and hand geometry recognition and
verification. Many other modalities
are in various stages of development
and assessment. Among these
available biometric traits Finger Print
proves to be one of the best traits
providing good mismatch ratio and
also reliable. The present scenario tooperate a bank locker is with locks
which are having keys. By this we
can¶t say that we are going to provide
good security to our lockers. To
provide perfect security and to make
our work easier, we are taking the
help of two different technologies viz.
EMBEDDED SYSTEMS and
BIOMETRICS. In this project we are
using our fingerprint and password as
a key to open bank locker there by
avoiding the usage of keys. There by
providing security and reliability.
1.2) OBJECTIVE OF THE
PROJECT:
This project is related with Embedded
system technology. The main
objective of this project is,To provide
good security to bank lockers by
using a unique module called
fingerprint module. In which a
person¶s fingerprint is stored and
identified .If at all a person has to
enter a locker room ,he need to scan
his fingerprint in the fingerprint
scanner then after verification further
he need to enter the desired
password ,thus using fingerprint,
password we are avoiding the usage
of keys and providing good security
for our lockers.
1.3) AIM OF THE PROJECT:
In this project heart of entire project is
microcontroller. Many ancient
methodologies have come up like
signature face ,iris, voice
identification, but all these can be
immitated or fabricated . However, a
fingerprint is completely unique to an
individual and stayed unchanged for
lifetime. so our project is a real time
project for providing perfect
authentication , we can also increase
& expand security levels by using
8/3/2019 fingerp
http://slidepdf.com/reader/full/fingerp 2/5
finger print technology it also
consumes low power and flexible
application
1.4)
ADVANTAGES&DISADVANTAGES:
There are many advantages of our
project because fingerprint is unique
for every person it cannot be
immitated or fabricated .It is not same
in the case of twins also,the
advantages are
Sophisticated security
No manual errors
No false intrusion
Need not to carry ant card
Others cannot steel the user¶s entry
key
DISADVANTAGES
It has less memory.
If external memory is interface with
microcontroller it takes large time to
access data base
1.5) THEIESES ORGANISATION:
This project FINGERPRINT BASED
BANK LOCKER SYSTEM is used for
providing safety and security and to
avoid the usage of keys. The present
scenario to operate a bank locker is
with locks which are having keys. By
this we can¶t say that we are going to
provide good security to our lockers.
To provide perfect security and to
make our work easier, we are taking
the help of two different technologies
viz. EMBEDDED SYSTEMS and
BIOMETRICS.
Chapter 1 deals with the Introduction
and need for designing a system like
³Fingerprint based bank locker
system ³and advantages and
disadvantages of this system.
Chapter 2 discusses the entire
theoretical part and discusses the
theory of the components used like
Microcontroller, Finger print module,
and LCD.
Chapter 3 introduces the design
aspects of the system that includes
block diagram, its description, and
the hardware components used in
the system along with their internal
structures. It also deals with the
circuit diagram and description along
with the design considerations of the
components.
Chapter 4 introduces the software
development of the system including
the logics used in the design along
with the algorithm, flowchart and
source code with its description.
Chapter 5 shows the results for each
design and describes the result.
Chapter 6 concludes the entire thesis
along with its future scope, the
8/3/2019 fingerp
http://slidepdf.com/reader/full/fingerp 3/5
conclusion itself contains the
applications of using this system and
the need for using this system and
the future enhancements of the
system.
CHAPTER 2
THEORITICAL CHAPTER
2.1)INTRODUCTION:
This project is related with Embedded
systems and bometrics technologies.
The main objective of this project
is,to provide safety for our bank
lockers and reliability.It uses
fingerprint and password as a key to
open the bank locker .
When coming to our application the
images of the persons who are
authorized to enter into the locker
room will be stored in the module
with a unique id. To prove that the
persons are authorized to enter that
area they need to scan their images.
This scanner is interfaced to 8051
microcontroller. By using this
controller we will be controlling the
scanning process. After the scanning
has been completed the person has
to enter the unique id which is given
to him to open his locker with the
help of a keypad. Immediately the
locker will be opened. After the work
has been completed if a switch is
pressed the locker will be closed
again. If an unauthorized person tries
to scan his image then an indication
will be given by a buzzer which is
interfaced to the controller. If an
authorized person forgets his id he
will be given 3 chances to re-enter
the id.
This project uses regulated 5V,
500mA power supply. 7805 three
terminal voltage regulator is used for
voltage regulation. Bridge type full
wave rectifier is used to rectify the ac
out put of secondary of 230/12V step
down transformer,NGE-OP67
module,AT89S52,lcd ,stepper
motor,keypad
2.2) AT89S52 MICRO
CONTROLLER:
The AT89S52 is a low-power, high-
performance CMOS 8-bit
microcontroller with 8K
bytes of in-system programmable
Flash memory. The device is
manufactured using
Atmel¶s high-density nonvolatile
memory technology and is
compatible with the industry-standard
80C51 instruction set and pinout. The
on-chip Flash allows the program
memory to be reprogrammed in-
system
8/3/2019 fingerp
http://slidepdf.com/reader/full/fingerp 5/5
Low Price
The cost of module is greatly reduced
by using self-developed optic
fingerprint enrollment device.
Easy to Use and Expand
It is not necessary for user to have
professional knowledge in the field of
fingerprint verification. User can
develop powerful fingerprint
verification application systems with
the command set provided by NGE -
OP 67.
Low Power Consumption
Sleep/awake control interface makes
NGE - OP 67 suitable for occasions
that require low power consumption.
Different Security Levels
User can set different security level
according to different application
environment.
System Characteristic
NG OP-67 Blue backlight Fingerprint
Sensor Module adopts the optic
fingerprint sensor, which consists of
high-performance DSP and Flash.
NG OP-67 is able to conduct
fingerprint image processing,
template generation, template
matching, fingerprint searching,
template storage, etc. This finger
print can be available with various
type of image qualities in case of wet
fingers ,dry fingers the quality varies
.by using this module that type of
finger prints can also be scanned
easily and identified.2steps involved
are
1) feature extraction
Reference:
http://www.seminarprojects.com/Thread-
fingerprint-based-bank-locker-system-full-
report#ixzz1mX77swsG