Finger Wheel V-Rakes · The decal kit part number for the 418 and 420 Finger Wheel V-Rakes is...
28
418/420 Finger Wheel V-Rakes PARTS MANUAL Replaces 908132 Form No. 909818
Transcript of Finger Wheel V-Rakes · The decal kit part number for the 418 and 420 Finger Wheel V-Rakes is...
418/420Finger Wheel
V-Rakes
PARTS MANUAL
Replaces908132
Form No.909818
IntroductionWhen ordering service parts, specify the correct partnumber, full description, quantity required, the unitmodel number and serial number.
The model and serial number are on a decal plate locatedon the back side of the left side width adjustment wheelpivot frame member. “Right’’ and “left’’ are determinedfrom a position standing behind the Finger WheelV-Rake and facing the direction of travel.
GEHL Company reserves the right to make changes orimprovements in the design or construction of any partof the unit without incurring the obligation to installsuch changes on any previously delivered units.
NOTE: On original tire replacement, Companypolicy prohibits the sale of replacement tires for allGEHL machinery. Replacement wheel sets areavailable and tire size information is called out withthe wheel sets to facilitate replacement tireselection. ALL REPLACEMENT TIRES MUST BEPURCHASED LOCALLY.
The hardware listed is for mounting information and isNOT included with the replacement part. Refer to thefollowing abbreviations table for fastener descriptions.Standard attaching hardware torque values are providedon the inside back cover. In the parts lists, if a numberprecedes the abbreviations, the number represents eitherthe quantity required (if other than one per item) or size.Part numbers for the attaching hardware are listed at theend of the manual or after the Numerical Index.
In the exploded-view parts list, Reference Numbersmay have additional information following the Refer-ence Number.
A tear drop symbol will indicate an application of a“wet” product such as oil, and the number inside the teardrop will correspond to the description in the parts list.
A number inside a hexagon will be the torque valuerequired, in foot-pounds, on the associated ReferenceNumber. Items shown in the parts list that do not haveReference Numbers are shown for reference purposesonly and are NOT available for purchase.
Unless otherwise specified, all cap screws and bolts areGrade 5, cadmium or zinc plated; hexagon nuts forGrade 5 cap screws and bolts are Grade B; hexagon nutsfor other screws and bolts are Grade A.
NOTE: The following abbreviations may beused herein:
AR - As RequiredASSD - AssembledASSY - AssemblyBHCS - Button Head Cap ScrewCB - Carriage BoltCCW - CounterclockwiseCP - Cotter PinCS - Cap Screw (Hexagon Head)CTR - CenterCW - ClockwiseDEG - DegreeDIA - DiameterFCS - Flanged Cap ScrewFHMS - Flat Head Machine ScrewFL - FlangedFLN - Flanged Lock Nut (Hexagon)FLS - Flanged Lock Screw (Hexagon)FW - Flat WasherGA - GaugeGR - GradeHD - Hard or HeadHN - Hex NutINCL - IncludesJT - JointLG - LargeLN - Lock NutLT - LeftLW - Lock WasherM - MetricMM/mm - MillimeterNF - National FinePB - Plow BoltPTO - Power Take OffRHMS - Round Head Machine ScrewRPM - Revolutions Per MinuteRT - RightSERR - SerratedSHCS - Socket Head Cap ScrewSHSS - Socket Head Set ScrewSN - Serial Number or Slotted NutSQ - SquareT - Tooth or TeethTFS - Thread Forming ScrewTHMS - Truss Head Machine ScrewTHRD - ThreadWLDMT - Weldment# - Number
- Torque Required in foot-pounds
- Indicates a Fluid Application
Printed in U.S.A. 1 909818/AP0804
TABLE OF CONTENTSIntroduction Inside Front Cover. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Table of Contents 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Decal Locations 2-3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Main Frame & Drawbar 4-9. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Finger Wheel Arms 10-11. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hydraulics 12-13. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Finger Wheels & Hubs 14. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hitchjack 15. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Options & Accessories 16-18. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Center Wheel 16-17. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Safety Chain 18. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Alphabetical Index 19. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Numerical Index 20-21. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Notes 22-24. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Standard Hardware Torque specifications Inside Back Cover. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
909818/AP0804 2 Printed in U.S.A.
DECAL LOCATIONS
GENERAL INFORMATIONDecal location information is provided to assist in theproper selection and application of new decals, in theevent the original decals become damaged or themachine is repainted. Refer to the listing for theillustration reference number, part number, descriptionand quantity of each decal provided in the kit. Referto the illustrations for replacement locations.
NOTE: Refer to the SAFETY chapter of the Op-erator’s Manual for the specific information pro-vided on the various safety decals furnished in thedecal kit.To ensure proper selection for correct replacementdecals, compare all of the various close-up locationdrawings to your machine BEFORE starting to refinishthe unit. Then circle each pictured decal (applicable toyour machine) while checking off its part number in thelisting. After you have verified all the decals needed forreplacement, set aside unneeded decals for disposal.
NEW DECAL APPLICATIONSurfaces MUST be free from dirt, dust, grease and otherforeign material before applying the new decal. Toapply a solid-formed decal, remove the smaller portionof the decal backing paper and apply this part of theexposed adhesive backing to the clean surface whilemaintaining proper position and alignment. Slowly peeloff the other portion of the backing paper while applyinghand pressure to smooth out the decal surface.
CAUTIONALWAYS observe safety precautions shownon decals. If decals become damaged or ifthe unit is repainted, replace the decals. Ifrepainting, BE SURE to affix ALL decals fromthe kit(s) that apply to your machine.
PAINT NOTICEUse this list to order paint for refinishingmachines with agricultural red and grey colorscheme:
906315 One Gal. AG Red902872 One Qt. Light Grey906316 6 (12 oz. Spray Cans) AG Red
902874 6 (12 oz. Spray Cans) Light Grey
The decal kit part number for the 418 and 420 FingerWheel V-Rakes is 130436.
The kit includes the following:Ref. PartNo. No. Description & Quantity1 093202 DANGER - Avoid Electrocution2 093367 WARNING - Operator’s Responsibility &
Read Manual3 093373 WARNING -General Safety4 093642 WARNING - Install Transport Latch5 119408 418 - Model 418 Only (2 Places)
(Later Style - Grey)119409 420 - Model 420 Only (2 Places)
(Later Style - Grey)6 120429 WARNING - Flotation (2 Places)7 126345 GEHL (2 Places)
(Later Style - Grey)8 145216 Reflector Strip (2 Places)9 145217 Amber Reflector Strip
Printed in U.S.A. 3 909818/AP0804
A
A
7 5
8
8
4
3
26
1
9
909818/AP0804 4 Printed in U.S.A.
1096
54
3259
1
7
11
8
1550
47
16
38
45
15
31
3742
51
1423
30
29
Ref. 5220
43
46
4119
41
46
21
14
22
2827
47
2625
2444
33
17
32
34
1423
41
46
35
36
21
14
41
46
19
49
14
14
14
18
18
40
12
39
61
60
6568
6766
62
6364
69
50
47
418/420 - MAIN FRAME & DRAWBAR(AFTER SN15900-418 & SN16300-420)
Printed in U.S.A. 5 909818/AP0804
Ref. Part Qty. Ref. Part Qty.No. No. Description Req. No. No. Description Req.
1 144785 AXLE/ASSY RT 1. . . . . . . . . . . . . . . . . . . . . .
(AFTER SN13500-418 & SN14300-420)
2 613271 WASHER/SPINDLE 2. . . . . . . . . . . . . . . . . .
3 612996 BEARING/TAPERED ROLLER 2. . . . . . . . .
4 613067 BOLT/HUB 16X40 10. . . . . . . . . . . . . . . . . . .
5 145060 HUB/WHEEL 104113 2. . . . . . . . . . . . . . . . .
6 114288 BEARING/TAPERED ROLLER 2. . . . . . . . .
7 614031 WHEEL 175/70X14 2. . . . . . . . . . . . . . . . . . .
613567 WHEEL 185/70X13 2. . . . . . . . . . . . . . . . . . .
8 045582 VALVE/TIRE 2. . . . . . . . . . . . . . . . . . . . . . . .
9 613272 NUT/SPINDLE 2. . . . . . . . . . . . . . . . . . . . . . .
10 612997 CAP/HUB 2. . . . . . . . . . . . . . . . . . . . . . . . . . .
11 613049 NUT/CONICAL LUG 16MM 10. . . . . . . . . . .
12 173035a JACK ASS’Y 2000 LB BULLDOG 1. . . . . . .
170056a JACK/ASSY TONNUTI 1. . . . . . . . . . . . . . .
14 076099 COTTER/HAIR PIN 11. . . . . . . . . . . . . . . . . .
15 613569 U-BOLT M12X102 12. . . . . . . . . . . . . . . . . . .
16 144784 AXLE/ASSY LT 1. . . . . . . . . . . . . . . . . . . . . .
(AFTER SN13500-418 & SN14300-420)
17 613579b FRAME/MAIN 1. . . . . . . . . . . . . . . . . . . . . . .
18 613638 PIN 2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
19 613939 TURNBUCKLE M16 2. . . . . . . . . . . . . . . . . .
20 613586 ARM/LT 1. . . . . . . . . . . . . . . . . . . . . . . . . . . .
21 613572 PIVOT/VERTICAL ARM 2. . . . . . . . . . . . . . .
22 614012 SUPPORT/ARM LT 1. . . . . . . . . . . . . . . . . . .
23 613571 PIVOT/HORIZONTAL ARM 2. . . . . . . . . . . .
24 613936 BRACKET 2. . . . . . . . . . . . . . . . . . . . . . . . . .
25 613573 ROD/ABSORBING 2. . . . . . . . . . . . . . . . . . .
26 613568 SPRING/COMPRESSION 2. . . . . . . . . . . . .
27 613937 GUIDE/SHOCK ABSORBER 2. . . . . . . . . .
28 613640 BOLT/HOOK M16 (2 FW) 2. . . . . . . . . . . . .
29 613585 RING 2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
30 614016 HEAD/MOVEABLE LT 1. . . . . . . . . . . . . . . .
31 614014 HEAD/FIXED LT 1. . . . . . . . . . . . . . . . . . . . .
32 614013 HEAD/FIXED RT 1. . . . . . . . . . . . . . . . . . . . .
33 170061 DRAWBAR 1. . . . . . . . . . . . . . . . . . . . . . . . .
34 614015 HEAD/MOVEABLE RT 1. . . . . . . . . . . . . . . .
35 614011 SUPPORT/ARM RT 1. . . . . . . . . . . . . . . . . .
36 613574 ARM/RT 1. . . . . . . . . . . . . . . . . . . . . . . . . . . .
37 656040 CS M20X70 2. . . . . . . . . . . . . . . . . . . . . . . . .
(STOP BOLT ASSY)
38 170062 PLATE 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
39 656068 NUT/HEX JAM M20-2.50 2. . . . . . . . . . . . . .
40 071246 NILN M10 2. . . . . . . . . . . . . . . . . . . . . . . . . . .
41 071249 NILN M16 4. . . . . . . . . . . . . . . . . . . . . . . . . . .
42 613021 FITTING/GREASE 4. . . . . . . . . . . . . . . . . . .
43 656017 CS M12X35 2. . . . . . . . . . . . . . . . . . . . . . . . .
44 656021 CS M12X70 2. . . . . . . . . . . . . . . . . . . . . . . . .
45 170075 HHCS 14MM X 160MM 4. . . . . . . . . . . . . . .
46 656036 CS M16X55 4. . . . . . . . . . . . . . . . . . . . . . . . .
47 656050 HN M12-1.75 30. . . . . . . . . . . . . . . . . . . . . . .
49 656119 FW M16 2. . . . . . . . . . . . . . . . . . . . . . . . . . . .
50 656120 FW M12 24. . . . . . . . . . . . . . . . . . . . . . . . . . .
51 656162 CS M10X100 2. . . . . . . . . . . . . . . . . . . . . . . .
52 113304 LN M12 2. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
59 656075 CP M6X40 2. . . . . . . . . . . . . . . . . . . . . . . . . .
60 170060 PIN 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
61 076100 COTTER/HAIR PIN 1. . . . . . . . . . . . . . . . . .
62 159290 BRACKET/SMV 1. . . . . . . . . . . . . . . . . . . . .
63 656138 LW M14 4. . . . . . . . . . . . . . . . . . . . . . . . . . . .
64 656051 HN M14-2.0 4. . . . . . . . . . . . . . . . . . . . . . . . .
65 650835 CS 1/4X1 2. . . . . . . . . . . . . . . . . . . . . . . . . . .
66 653005 HN 1/4 2. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
67 654022 LW 1/4 2. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
68 654002 FW 1/4 2. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
69 159223 PLATE 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
a) For component breakdown, see page entitled ‘Hitchjack’.b) For repair, add Amber Reflector Strip 145217, two Red
Reflectors 145216 and Warning Decal 093642.
418/420 - MAIN FRAME & DRAWBAR(AFTER SN15900-418 & SN16300-420)
909818/AP0804 6 Printed in U.S.A.
1096
543
259
1
7
11
8
1550
47
16
3853
5754 45
5047
15
55
31
37
39
42
51
14 2330
29Ref.
5220
43
46
4119
41
46
21
14
22
2827
4726
252444
12
33
17
32
3414 23
41
46
35
36
21
14
41
46
19
49
14
14
14
18
18
40
418/420 - MAIN FRAME & DRAWBAR(BEFORE SN15901-418 & SN16301-420)
Printed in U.S.A. 7 909818/AP0804
Ref. Part Qty. Ref. Part Qty.No. No. Description Req. No. No. Description Req.
1 144785 AXLE/ASSY RT 1. . . . . . . . . . . . . . . . . . . . . .
(AFTER SN13500-418 & SN14300-420)
2 613271 WASHER/SPINDLE 2. . . . . . . . . . . . . . . . . .
3 612996 BEARING/TAPERED ROLLER 2. . . . . . . . .
4 613067 BOLT/HUB 16X40 10. . . . . . . . . . . . . . . . . . .
5 145060 HUB/WHEEL 104113 2. . . . . . . . . . . . . . . . .
6 114288 BEARING/TAPERED ROLLER 2. . . . . . . . .
7 614031 WHEEL 175/70X14 2. . . . . . . . . . . . . . . . . . .
613567 WHEEL 185/70X13 2. . . . . . . . . . . . . . . . . . .
8 045582 VALVE/TIRE 2. . . . . . . . . . . . . . . . . . . . . . . .
9 613272 NUT/SPINDLE 2. . . . . . . . . . . . . . . . . . . . . . .
10 612997 CAP/HUB 2. . . . . . . . . . . . . . . . . . . . . . . . . . .
11 613049 NUT/CONICAL LUG 16MM 10. . . . . . . . . . .
12 143469a JACK/ASSY FULTON 1. . . . . . . . . . . . . . . . .
14 076099 COTTER/HAIR PIN 11. . . . . . . . . . . . . . . . . .
15 613569 U-BOLT M12X102 12. . . . . . . . . . . . . . . . . . .
16 144784 AXLE/ASSY LT 1. . . . . . . . . . . . . . . . . . . . . .
(AFTER SN13500-418 & SN14300-420)
17 613579b FRAME/MAIN 1. . . . . . . . . . . . . . . . . . . . . . .
18 613638 PIN 2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
19 613939 TURNBUCKLE M16 2. . . . . . . . . . . . . . . . . .
20 613586 ARM/LT 1. . . . . . . . . . . . . . . . . . . . . . . . . . . .
21 613572 PIVOT/VERTICAL ARM 2. . . . . . . . . . . . . . .
22 614012 SUPPORT/ARM LT 1. . . . . . . . . . . . . . . . . . .
23 613571 PIVOT/HORIZONTAL ARM 2. . . . . . . . . . . .
24 613936 BRACKET 2. . . . . . . . . . . . . . . . . . . . . . . . . .
25 613573 ROD/ABSORBING 2. . . . . . . . . . . . . . . . . . .
26 613568 SPRING/COMPRESSION 2. . . . . . . . . . . . .
27 613937 GUIDE/SHOCK ABSORBER 2. . . . . . . . . .
28 613640 BOLT/HOOK M16 (2 FW) 2. . . . . . . . . . . . .
29 613585 RING 2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
30 614016 HEAD/MOVEABLE LT 1. . . . . . . . . . . . . . . .
31 614014 HEAD/FIXED LT 1. . . . . . . . . . . . . . . . . . . . .
32 614013 HEAD/FIXED RT 1. . . . . . . . . . . . . . . . . . . . .
33 144786 DRAWBAR 1. . . . . . . . . . . . . . . . . . . . . . . . .
(AFTER SN14000-418 & SN14600-420)
34 614015 HEAD/MOVEABLE RT 1. . . . . . . . . . . . . . . .
35 614011 SUPPORT/ARM RT 1. . . . . . . . . . . . . . . . . .
36 613574 ARM/RT 1. . . . . . . . . . . . . . . . . . . . . . . . . . . .
37 656040 CS M20X70 2. . . . . . . . . . . . . . . . . . . . . . . . .
(STOP BOLT ASSY)
38 144787 PLATE/DRAWBAR MOUNT 1. . . . . . . . . . .
(AFTER SN14000-418 & SN14600-420)
39 656068 NUT/HEX JAM M20-2.50 2. . . . . . . . . . . . . .
40 071246 NILN M10 2. . . . . . . . . . . . . . . . . . . . . . . . . . .
41 071249 NILN M16 4. . . . . . . . . . . . . . . . . . . . . . . . . . .
42 613021 FITTING/GREASE 4. . . . . . . . . . . . . . . . . . .
43 656017 CS M12X35 2. . . . . . . . . . . . . . . . . . . . . . . . .
44 656021 CS M12X70 2. . . . . . . . . . . . . . . . . . . . . . . . .
45 656026 CS M12X140 4. . . . . . . . . . . . . . . . . . . . . . . .
46 656036 CS M16X55 4. . . . . . . . . . . . . . . . . . . . . . . . .
47 656050 HN M12-1.75 30. . . . . . . . . . . . . . . . . . . . . . .
49 656119 FW M16 2. . . . . . . . . . . . . . . . . . . . . . . . . . . .
50 656120 FW M12 28. . . . . . . . . . . . . . . . . . . . . . . . . . .
51 656162 CS M10X100 2. . . . . . . . . . . . . . . . . . . . . . . .
52 113304 LN M12 2. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
53 047269 SOCKET/SIGN MOUNTING 1. . . . . . . . . . .
54 071701 LN 5/16 2. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
55 130422 BRACKET/SMV 1. . . . . . . . . . . . . . . . . . . . .
57 650687 CB 5/16X3/4 2. . . . . . . . . . . . . . . . . . . . . . . .
59 656075 CP M6X40 2. . . . . . . . . . . . . . . . . . . . . . . . . .
a) For component breakdown, see page entitled ‘Hitchjack’.b) For repair, add Amber Reflector Strip 145217, two Red
Reflectors 145216 and Warning Decal 093642.
418/420 - MAIN FRAME & DRAWBAR(BEFORE SN15901-418 & SN16301-420)
909818/AP0804 8 Printed in U.S.A.
1
234
5
67
8
9
10
11
2425
26
27
28
14
13
15
16
15
37
17
18
19
20
22
21
31
32
34
30
23
1233
35
14
36
29
39
18
418/420 - MAIN FRAME & DRAWBAR (EARLY STYLE)
Printed in U.S.A. 9 909818/AP0804
Ref. Part Qty. Ref. Part Qty.No. No. Description Req. No. No. Description Req.
1 613582 ARM/WHEEL RT 1. . . . . . . . . . . . . . . . . . . . .
(BEFORE SN13501-418 & SN14301-420)
2 613271 WASHER/SPINDLE 2. . . . . . . . . . . . . . . . . .
3 612996 BEARING/TAPERED ROLLER 2. . . . . . . . .
4 613067 BOLT/HUB 16X40 10. . . . . . . . . . . . . . . . . . .
5 145060 HUB/WHEEL 104113 2. . . . . . . . . . . . . . . . .
6 114288 BEARING/TAPERED ROLLER 2. . . . . . . . .
7 614031 WHEEL 175/70X14 2. . . . . . . . . . . . . . . . . . .
8 045582 VALVE/TIRE 2. . . . . . . . . . . . . . . . . . . . . . . .
9 613272 NUT/SPINDLE 2. . . . . . . . . . . . . . . . . . . . . . .
656075 CP M6.3X40 2. . . . . . . . . . . . . . . . . . . . . . .
10 612997 CAP/HUB 2. . . . . . . . . . . . . . . . . . . . . . . . . . .
11 613049 NUT/CONICAL LUG 16MM 10. . . . . . . . . . .
12 143469a JACK/ASSY (FULTON) 1. . . . . . . . . . . . . . .
13 130414 STAND/ASSY 1. . . . . . . . . . . . . . . . . . . . . . .
(BEFORE SN14001-418 & SN14601-420)
14 076099 COTTER/HAIR PIN 11. . . . . . . . . . . . . . . . . .
15 613569 U-BOLT M12X102 12. . . . . . . . . . . . . . . . . . .
(24) HN, FW
16 613583 ARM/WHEEL LT 1. . . . . . . . . . . . . . . . . . . . .
(BEFORE SN13501-418 & SN14301-420)
17 613579b FRAME/MAIN 1. . . . . . . . . . . . . . . . . . . . . . .
18 613638 PIN 2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
19 613939 TURNBUCKLE M16 2. . . . . . . . . . . . . . . . . .
656036 CS M16X50 (LN) 4. . . . . . . . . . . . . . . . . . .
20 613586 ARM/LT 1. . . . . . . . . . . . . . . . . . . . . . . . . . . .
656017 CS M12X35 (HN) 1. . . . . . . . . . . . . . . . . . .
21 613572 PIVOT/VERTICAL ARM 2. . . . . . . . . . . . . . .
22 614012 SUPPORT/ARM LT 1. . . . . . . . . . . . . . . . . . .
23 613571 PIVOT/HORIZONTAL ARM 2. . . . . . . . . . . .
24 613936 BRACKET 2. . . . . . . . . . . . . . . . . . . . . . . . . .
656021 CS M12X80 (LN) 2. . . . . . . . . . . . . . . . . . .
25 613573 ROD/ABSORBING 2. . . . . . . . . . . . . . . . . . .
26 613568 SPRING/COMPRESSION 2. . . . . . . . . . . . .
27 613937 GUIDE/SHOCK ABSORBER 2. . . . . . . . . .
28 613640 BOLT/HOOK M16 (2 FW) 2. . . . . . . . . . . . .
29 613585 RING 2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
656162 CS M10X100 (LN) 2. . . . . . . . . . . . . . . . . .
30 614016 HEAD/MOVEABLE LT 1. . . . . . . . . . . . . . . .
31 614014 HEAD/FIXED LT 1. . . . . . . . . . . . . . . . . . . . .
32 614013 HEAD/FIXED LT. 1. . . . . . . . . . . . . . . . . . . . .
33 144786 DRAWBAR 1. . . . . . . . . . . . . . . . . . . . . . . . .
(BEFORE SN14001-418 & SN14601-420)
656026 CS M12X140 (HN, FW) 4. . . . . . . . . . . . . .
34 614015 HEAD/MOVEABLE RT 1. . . . . . . . . . . . . . . .
35 614011 SUPPORT/ARM RT 1. . . . . . . . . . . . . . . . . .
36 613574 ARM/RT 1. . . . . . . . . . . . . . . . . . . . . . . . . . . .
656017 CS M12X35 (HN) 1. . . . . . . . . . . . . . . . . . .
37 656040 CS M20X70 2. . . . . . . . . . . . . . . . . . . . . . . . .
(STOP BOLT ASSY)
39 656068 NUT/HEX JAM M20-2.50 2. . . . . . . . . . . . . .
a) For component breakdown, see page entitled ‘Hitchjack’.b) For repair, add Amber Reflector Strip 145217, two Red
Reflectors 145216 and Warning Decal 093642.
418/420 - MAIN FRAME & DRAWBAR (EARLY STYLE)
909818/AP0804 10 Printed in U.S.A.
Model 418
Model 420
7
3
5
4
23
53
7
23
53
78
7
5 3
4 9
10
Ref. Part Qty. Ref. Part Qty.No. No. Description Req. No. No. Description Req.
2 613638 LOCK PIN (LONG) 2. . . . . . . . . . . . . . . . . . .
3 076099 COTTER/HAIR PIN 6. . . . . . . . . . . . . . . . . .
4 156720 FRAME/4-WHEEL (418) 2. . . . . . . . . . . . . .
156719 FRAME/5-WHEEL (420) 2. . . . . . . . . . . . . .
5 613639 LOCK PIN (SHORT) 4. . . . . . . . . . . . . . . . . .
7 613600 ARM/WHEEL 4. . . . . . . . . . . . . . . . . . . . . . . .
8 612986 ARM/5TH RAKE WHEEL (420 ONLY) 2. . .
9 656022 CS M12X90 (420 ONLY) 2. . . . . . . . . . . . . .
10 113304 LN M12 (420 ONLY) 2. . . . . . . . . . . . . . . . . .
418/420 - FINGER WHEEL ARMS (LATER STYLE)
Printed in U.S.A. 11 909818/AP0804
Model 418
Model 420
1
3
2
6
4
7
4
12
3
3
3
3
3
5
7
7
7
6
8
5
5
5
Ref. Part Qty. Ref. Part Qty.No. No. Description Req. No. No. Description Req.
1 613598 SUPPORT/FRAME 2. . . . . . . . . . . . . . . . . . .
2 613638 PIN/LOCK (LONG) 2. . . . . . . . . . . . . . . . . . .
3 076099 COTTER/HAIR PIN 6. . . . . . . . . . . . . . . . . .
4 613587 FRAME/4-WHEEL (418) 2. . . . . . . . . . . . . .
613588 FRAME/5-WHEEL (420) 2. . . . . . . . . . . . . .
656007 CS M10X25 (LN) 8. . . . . . . . . . . . . . . . . . .
5 613639 PIN/LOCK (SHORT) 4. . . . . . . . . . . . . . . . . .
6 612776 BRACKET/SUPPORT FRAME 4. . . . . . . . .
656009 CS M10X35 (LN) 8. . . . . . . . . . . . . . . . . . .
7 613600 ARM/WHEEL 4. . . . . . . . . . . . . . . . . . . . . . . .
8 612986 ARM/5TH RAKE WHEEL (420 ONLY) 2. . .
656022 CS M12X90 (LN) 2. . . . . . . . . . . . . . . . . . .
418/420 - FINGER WHEEL ARMS (EARLY STYLE)
909818/AP0804 12 Printed in U.S.A.
Ref.
9
10
6
87
72
1
SEALKIT
11
10
9
SEALKIT
11
Ref.
12
4
5
54
1314
Ref. Part Qty. Ref. Part Qty.No. No. Description Req. No. No. Description Req.
1 159223 BRACKET 1. . . . . . . . . . . . . . . . . . . . . . . . . .
2 087393 TEE/HYDRAULIC FITTING 1. . . . . . . . . . . .
4 170066 BREATHER/ASSY 2. . . . . . . . . . . . . . . . . . .
5 170063 RESTRICTOR 2. . . . . . . . . . . . . . . . . . . . . . .
6 119575 HOSE/ASSY 3/8X126 1. . . . . . . . . . . . . . . .
7 136112 HOSE/ASSY 3/8X36 2. . . . . . . . . . . . . . . . . .
8 170064 CYL./HYDR. RT 2.5 x 8 1. . . . . . . . . . . . . . .
9 112180 PIN/CLINCH 8. . . . . . . . . . . . . . . . . . . . . . . .
10 083232 PIN/CLEVIS 4. . . . . . . . . . . . . . . . . . . . . . . . .
11 170331 KIT/SEAL HYD. CYL. 2.5 DIA. 1. . . . . . . . .
12 170065 CYL./HYDR. LT 2.5 x 8 1. . . . . . . . . . . . . . . .
13 054995 ADAPTER/MALE 1. . . . . . . . . . . . . . . . . . . .
14 170323 FAST FLUID CONNECTOR 1. . . . . . . . . . .
418/420 - HYDRAULICS (AFTER 15900-418 & SN16300-420)
Printed in U.S.A. 13 909818/AP0804
Ref.
9
10
45
36
87
72
1
SEALKIT
11
54
8
10
9
SEALKIT
11
Ref.
Ref. Part Qty. Ref. Part Qty.No. No. Description Req. No. No. Description Req.
1 130421 BRACKET 1. . . . . . . . . . . . . . . . . . . . . . . . . .
2 098691 TEE/HYDRAULIC FITTING 1. . . . . . . . . . . .
3 130424 UNION/HYDRAULIC FITTING 1. . . . . . . . .
(RESTRICTOR)
4 089860 BREATHER/ASSY 2. . . . . . . . . . . . . . . . . . .
5 098333 UNION/HYDRAULIC FITTING 2. . . . . . . . .
6 130430 HOSE/ASSY 3/8X120 1. . . . . . . . . . . . . . . .
7 130431 HOSE/ASSY 3/8X36 2. . . . . . . . . . . . . . . . . .
8 095009 CYLINDER 2.5 X 8 (LATER STYLE) 2. . . .
130411 CYLINDER/ASY 2 X 8 (EARLY STYLE) 2.
9 112180 PIN/CLINCH 8. . . . . . . . . . . . . . . . . . . . . . . .
10 112181 PIN/CLEVIS 4. . . . . . . . . . . . . . . . . . . . . . . . .
11 141672 KIT/SEAL 2.0 CYL (LATER STYLE) 1. . . . .
095019 KIT/SEAL 2.5 CYL (EARLY STYLE) 1. . . . .
418/420 - HYDRAULICS (BEFORE 15901-418 & SN16301-420)
909818/AP0804 14 Printed in U.S.A.
43
1
5
6
51
21 2
5
17
1819
1615
1413
12
11
Left Right
Ref. Part Qty. Ref. Part Qty.No. No. Description Req. No. No. Description Req.
171183 RAKE WHEEL COMP. L.H. 7MM GREY AR
171182 RAKE WHEEL COMP. R.H. 7MM GREY AR
CONSISTS OF:
1 171180 TINES (40 PACK) BUNDLE 1. . . . . . . . . . . .
STRGT.DIM.7 GREY
2 612781 RIM 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3 612785 BOLT/TOOTH 20. . . . . . . . . . . . . . . . . . . . . .
4 612784 CLIP 10. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5 612782 PLATE/TINE 1. . . . . . . . . . . . . . . . . . . . . . . .
6 656049 HN M10-1.25 20. . . . . . . . . . . . . . . . . . . . . . .
11 612788 CAP/HUB 1. . . . . . . . . . . . . . . . . . . . . . . . . . .
12 656134 NUT/SELF LOCKING M18 1. . . . . . . . . . . .
13 520074 BEARING/BALL (OUTER) 1. . . . . . . . . . . . .
14 612787 HUB ONLY 1. . . . . . . . . . . . . . . . . . . . . . . . . .
15 062367 BEARING/BALL (INNER) 1. . . . . . . . . . . . .
16 612786 SHIELD/BEARING 1. . . . . . . . . . . . . . . . . . .
17 656007 CS M10X25 6. . . . . . . . . . . . . . . . . . . . . . . . .
18 656049 HN M10 6. . . . . . . . . . . . . . . . . . . . . . . . . . . .
19 656133 FW M10 6. . . . . . . . . . . . . . . . . . . . . . . . . . . .
418/420 - FINGER WHEELS & HUBS
Printed in U.S.A. 15 909818/AP0804
143469 Hitchjack(Fulton)
2 3
1
170056 Hitchjack(Tonnuti)
Ref. Part Qty.No. No. Description Req.
170056 HITCHJACK 1. . . . . . . . . . . . . . . . . . . .
CONSISTS OF:
1 170058 JACKSTAND 1. . . . . . . . . . . . . . . . . . . .
2 613096 HANDLE/ADJUSTING 1. . . . . . . . . . . .
3 656065 JN M12-1.75 1. . . . . . . . . . . . . . . . . . . .
4 656144 CS M12-1.75X110 1. . . . . . . . . . . . . . . .
Ref. Part Qty.No. No. Description Req.
143469 HITCHJACK 1. . . . . . . . . . . . . . . . . . . .
CONSISTS OF:
1 143603 KIT/JACK HANDLE 1. . . . . . . . . . . . . .
2 143601 KIT/PIN & CHAIN 9/16 1. . . . . . . . . . . .
3 143599 KIT/BEARING 2000# 1. . . . . . . . . . . . .
Ref. Part Qty.No. No. Description Req.
173035 JACK ASS’Y 2000 LB 1. . . . . . . . . . . . .
CONSISTS OF:
1 173036 KIT/PIN & CHAIN 1. . . . . . . . . . . . . . . .
2 173037 KIT/STD. BRG. REPLACEMENT 1. . .
3 173039 KIT/TW CRANK REPLACEMENT 1. .
173035 Hitchjack(Bulldog)
1
2
3
418/420 - HITCHJACK
909818/AP0804 16 Printed in U.S.A.
Center Wheel
3334
36
37 3839
4041
42
2022
18
31
32
35
B
9
4
A
1216
311
1
2Ref.
73
1514
15
1
A
1
8
6
17
19
5
13
7
11
11
43
B
44
45 46
47
*
C
*
*
*Remove and retain
Standard onmachinesafter(418) andSN (420)
SN 15900
16300
418/420 - OPTIONS & ACCESSORIES
Printed in U.S.A. 17 909818/AP0804
Ref. Part Qty. Ref. Part Qty.No. No. Description Req. No. No. Description Req.
CENTER WHEEL 1. . . . . . . . . . . . . . . . . . . .
CONSISTS OF:
1 076099 COTTER/HAIR PIN 4. . . . . . . . . . . . . . . . . .
2 144549 PIVOT/PULLEY 1. . . . . . . . . . . . . . . . . . . . . .
3 156763 ROPE/WIRE 1. . . . . . . . . . . . . . . . . . . . . . . .
4 156764 ARM/RAKE WHEEL 1. . . . . . . . . . . . . . . . . .
5 156765 SUPPORT/ARM 1. . . . . . . . . . . . . . . . . . . . .
6 156766 BRACKET/PULLEY 1. . . . . . . . . . . . . . . . . .
7 156767 PULLEY 2. . . . . . . . . . . . . . . . . . . . . . . . . . . .
8 156768 PIN 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9 604629 PIN/COTTER HAIR 1. . . . . . . . . . . . . . . . . .
11 613001 SHACKLE 3. . . . . . . . . . . . . . . . . . . . . . . . . .
12 613046 BUSHING/PIVOT 2. . . . . . . . . . . . . . . . . . . .
13 613621 BRACKET 1. . . . . . . . . . . . . . . . . . . . . . . . . .
14 614056 SPRING/COMPRESSION 1. . . . . . . . . . . . .
15 614057 HOOK/SPRING 2. . . . . . . . . . . . . . . . . . . . . .
16 651152 FW 1-1/4 1. . . . . . . . . . . . . . . . . . . . . . . . . . .
17 651522 CS M12-1.75X150 2. . . . . . . . . . . . . . . . . . . .
18 656007 CS M10X25 6. . . . . . . . . . . . . . . . . . . . . . . . .
19 656050 NUT/HEX M12-1.7 2. . . . . . . . . . . . . . . . . . .
20 656102 HN M10-1.50 6. . . . . . . . . . . . . . . . . . . . . . . .
22 656133 FW M10 6. . . . . . . . . . . . . . . . . . . . . . . . . . . .
31 171180 TINES (40 PACK) BUNDLE 1. . . . . . . . . . . .
32 612781 RIM 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
33 612785 BOLT/TOOTH 20. . . . . . . . . . . . . . . . . . . . . .
34 612784 CLIP 10. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
35 612782 PLATE/TINE 1. . . . . . . . . . . . . . . . . . . . . . . .
36 656049 HN M10-1.25 20. . . . . . . . . . . . . . . . . . . . . . .
37 612788 CAP/HUB 1. . . . . . . . . . . . . . . . . . . . . . . . . . .
38 656134 NUT/SELF LOCKING M18 1. . . . . . . . . . . .
39 520074 BEARING/BALL 1. . . . . . . . . . . . . . . . . . . . .
40 612787 HUB ONLY 1. . . . . . . . . . . . . . . . . . . . . . . . . .
41 062367 BEARING/BALL 1. . . . . . . . . . . . . . . . . . . .
42 612786 SHIELD/BEARING 1. . . . . . . . . . . . . . . . . . .
43 654016 FW 1 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
44 173622 U-BOLT 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . (AFTER SN 15900-418 & 16300-420)
45 656103 WASHER 2. . . . . . . . . . . . . . . . . . . . . . . . . . . (AFTER SN 15900-418 & 16300-420)
46 656049 NUT 2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (AFTER SN 15900-418 & 16300-420)
47 656120 FW M12 ZO 1. . . . . . . . . . . . . . . . . . . . . . . . .
418/420 - OPTIONS & ACCESSORIES
909818/AP0804 18 Printed in U.S.A.
142965 Safety Chain
2
5
9
6
710
8
1
4
Ref. Part Qty. Ref. Part Qty.No. No. Description Req. No. No. Description Req.
142965 CHAIN/5 TON SAFETY 1. . . . . . . . . . . . . . .
CONSISTS OF:
1 069076 FW 25/32 SPECIAL 1. . . . . . . . . . . . . . . . . .
2 080894 CLEVIS 1. . . . . . . . . . . . . . . . . . . . . . . . . . . .
4 650172 CS 3/4X3-1/4 1. . . . . . . . . . . . . . . . . . . . . . . .
650649 CS 3/4X2 1. . . . . . . . . . . . . . . . . . . . . . . . . . .
5 650695 CS 5/8X3-1/2 1. . . . . . . . . . . . . . . . . . . . . . . .
6 653021 HN 5/8 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7 653026 HN 3/4 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8 654014 FW 3/4 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9 654032 LW 5/8 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
10 654034 LW 3/4 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
418/420 - OPTIONS & ACCESSORIES
Printed in U.S.A. 19 909818/AP0804
IndexA
Arm, Finger Wheel, 10, 11Axle, Wheel, 5, 7
BBearings
Finger Wheel Hubs, 14, 17Wheel, 5, 7, 9
CCenter Wheel, 16–17Cylinder, 12, 13
DDecals
Application, 2Locations, 2–3
Drawbar, 4–7
FFinger Wheel Arms, 10–11Finger Wheel Hubs, 14Finger Wheels, 14Frame
Arm Support, 11Finger Wheel, 10, 11
HHead (Moveable or Fixed), 5, 7, 9Hitchjack, 5, 7, 9, 15
Hub, Wheel, 5, 7, 9Hydraulic Hoses, 12, 13Hydraulics, 12–13
MMain Frame, 4–7, 9
OOptions & Accessories
Center Wheel, 16–17Safety Chain, 18
PPaint Notice, 2
RRake Arms, 10, 11
SSafety Chain, 18Shock Absorber, 5, 7, 9Stand Assembly, 9Support, Arm, 5, 7, 9
TTee Fitting, 12, 13Tines, 14, 17Turnbuckle, 5, 7, 9
VValve, Tire, 5, 7, 9
418/420 - NUMERICAL INDEX
Part Page Ref. Part Page Ref. Part Page Ref. Part Page Ref.No. No. No. No. No. No. No. No. No. No. No. No.
909818/AP0804 20 Printed in U.S.A.
045582 05 08
045582 07 08
045582 09 08
047269 07 53
054995 12 13
062367 14 15
062367 17 41
069076 18 01
071246 05 40
071246 07 40
071249 05 41
071249 07 41
071701 07 54
076099 05 14
076099 07 14
076099 09 14
076099 10 03
076099 11 03
076099 17 01
076100 05 61
080894 18 02
083232 12 10
087393 12 02
089860 13 04
093202 02 01
093367 02 02
093373 02 03
093642 02 04
095009 13 08
095019 13 11
098333 13 05
098691 13 02
112180 12 09
112180 13 09
112181 13 10
113304 05 52
113304 07 52
113304 10 10
114288 05 06
114288 07 06
114288 09 06
119408 02 05
119409 02 05
119575 12 06
120429 02 06
126345 02 07
130411 13 08
130414 09 13
130421 13 01
130422 07 55
130424 13 03
130430 13 06
130431 13 07
136112 12 07
141672 13 11
142965 18 00
143469 07 12
143469 09 12
143469 15 00
143599 15 03
143601 15 02
143603 15 01
144549 17 02
144784 05 16
144784 07 16
144785 05 01
144785 07 01
144786 07 33
144786 09 33
144787 07 38
145060 05 05
145060 07 05
145060 09 05
145216 02 08
145217 02 09
155967 17 31
156719 10 04
156720 10 04
156763 17 03
156764 17 04
156765 17 05
156766 17 06
156767 17 07
156768 17 08
159223 05 69
159223 12 01
159290 05 62
170056 05 12
170056 15 00
170058 15 01
170060 05 60
170061 05 33
170062 05 38
170063 12 05
170064 12 08
170065 12 12
170066 12 04
170075 05 45
170323 12 14
170331 12 11
171180 14 01
171182 14 00
171183 14 00
173035 05 12
173035 15 00
173036 15 01
173037 15 02
173039 15 03
173622 17 44
520074 14 13
520074 17 39
604629 17 09
612776 11 06
612781 14 02
612781 17 32
612782 14 05
612782 17 35
612784 14 04
612784 17 34
612785 14 03
612785 17 33
612786 14 16
612786 17 42
612787 14 14
612787 17 40
612788 14 11
612788 17 37
612986 10 08
612986 11 08
612996 05 03
612996 07 03
612996 09 03
612997 05 10
612997 07 10
612997 09 10
613001 17 11
613021 05 42
613021 07 42
613046 17 12
613049 05 11
613049 07 11
613049 09 11
613067 05 04
613067 07 04
613067 09 04
613096 15 02
613271 05 02
613271 07 02
613271 09 02
613272 05 09
613272 07 09
613272 09 09
613568 05 26
613568 07 26
613568 09 26
613569 05 15
613569 07 15
613569 09 15
613571 05 23
613571 07 23
613571 09 23
613572 05 21
613572 07 21
613572 09 21
613573 05 25
613573 07 25
613573 09 25
613574 05 36
613574 07 36
613574 09 36
613579 05 17
613579 07 17
613579 09 17
613582 09 01
613583 09 16
613585 05 29
613585 07 29
613585 09 29
613586 05 20
613586 07 20
613586 09 20
613587 11 04
613588 11 04
613598 11 01
613600 10 07
418/420 - NUMERICAL INDEX
Part Page Ref. Part Page Ref. Part Page Ref. Part Page Ref.No. No. No. No. No. No. No. No. No. No. No. No.
Printed in U.S.A. 21 909818/AP0804
613600 11 07
613621 17 13
613638 05 18
613638 07 18
613638 09 18
613638 10 02
613638 11 02
613639 10 05
613639 11 05
613640 05 28
613640 07 28
613640 09 28
613936 05 24
613936 07 24
613936 09 24
613937 05 27
613937 07 27
613937 09 27
613939 05 19
613939 07 19
613939 09 19
614011 05 35
614011 07 35
614011 09 35
614012 05 22
614012 07 22
614012 09 22
614013 05 32
614013 07 32
614013 09 32
614014 05 31
614014 07 31
614014 09 31
614015 05 34
614015 07 34
614015 09 34
614016 05 30
614016 07 30
614016 09 30
614031 05 07
614031 07 07
614031 09 07
614056 17 14
614057 17 15
650172 18 04
650649 18 04
650687 07 57
650695 18 05
650835 05 65
651152 17 16
651522 17 17
653005 05 66
653021 18 06
653026 18 07
654002 05 68
654014 18 08
654016 17 43
654022 05 67
654032 18 09
654034 18 10
656007 11 04
656007 14 17
656007 17 18
656009 11 06
656017 05 43
656017 07 43
656017 09 20
656017 09 36
656021 05 44
656021 07 44
656021 09 24
656022 10 09
656022 11 08
656026 07 45
656026 09 33
656036 05 46
656036 07 46
656036 09 19
656040 05 37
656040 07 37
656040 09 37
656049 14 06
656049 14 18
656049 17 36
656049 17 46
656050 05 47
656050 07 47
656050 17 19
656051 05 64
656065 15 03
656068 05 39
656068 07 39
656068 09 39
656075 05 59
656075 07 59
656075 09 09
656102 17 20
656103 17 45
656119 05 49
656119 07 49
656120 05 50
656120 07 50
656120 17 47
656133 14 19
656133 17 22
656134 14 12
656134 17 38
656138 05 63
656144 15 04
656162 05 51
656162 07 51
656162 09 29
Size &Description
PartNumber
Size &Description
PartNumber
Size &Description
PartNumber
Size &Description
PartNumber
M10 LN 071246 M12 P 656120 M16 LN 071249 5/16 LN 071701
M10 N 656102 M12 N 656050 M16 P 656119
M10 P 656133 M12 LN 113304
909818/AP0804 22 Printed in U.S.A.
NOTES
Printed in U.S.A. 23 909818/AP0804
NOTES
909818/AP0804 24 Printed in U.S.A.
NOTES
TORQUE SPECIFICATIONSNOTE: Use these torque values when tightening GEHL hardware (excluding: locknuts and self-tapping, thread-forming and sheet metal screws) unless specified otherwise.
All torque values are in Lb-Ft except those marked with an * which are Lb-In(For metric torque value Nm, multiply Lb-Ft value by 1.355 or Lb-In value by 0.113)
Unified Grade 2 Grade 5 Grade 8National Thread Dry Lubed Dry Lubed Dry Lubed
8-32 19* 14* 30* 22* 41* 31*8-328-36
1920*
1415*
3031*
2223*
4143*
31 32*
10-24 27* 21* 43* 32* 60* 45*10-2410-32
2731*
2123*
4349*
3236*
6068*
45 51*
1/4-20 66* 50* 9 75* 12 91/4-201/4-28
6676*
5056*
910
7586*
1214
9 10
5/16-18 11 9 17 13 25 185/16-185/16-24
1112 9 17
191314 25 18
20
3/8-16 20 15 30 23 45 353/8-163/8-24
2023
1517
3035
2325
4550 35
7/16-14 32 24 50 35 70 557/16-147/16-20
3236
2427
5055
3540
7080
55 60
1/2-13 50 35 75 55 110 801/2-131/2-20
5055
3540
7590
5565
110120
80 90
9/16-12 70 55 110 80 150 1109/16-129/16-18
7080
5560
110120
8090
150170
110 130
5/8-11 100 75 150 110 220 1705/8-115/8-18
100110
7585
150180
110130
220240
170 180
3/4-10 175 130 260 200 380 2803/4-103/4-16
175200
130150
260300
200220
380420
280 320
7/8-9 170 125 430 320 600 4607/8-97/8-14
170180
125140
430470
320360
600660
460 500
1-8 250 190 640 480 900 6801-81-14
250270
190210
640710
480530
9001000
680 740
Metric Grade 8.8 8.8 Grade 10.9 10.9 Grade 12.9 12.9
Course Thread Dry Lubed Dry Lubed Dry Lubed
M6-1 8 6 11 8 13.5 10
M8-1.25 19 14 27 20 32.5 24
M10-1.5 37.5 28 53 39 64 47
M12-1.75 65 48 91.5 67.5 111.5 82
M14-2 103.5 76.5 145.5 108 176.5 131
M16-2 158.5 117.5 223.5 165.5 271 200
909818/AP0804 2004 GEHL Company. All Rights Reserved. Printed in U.S.A.
Gehl Company 143 Water Street, P.O. Box 179, West Bend, WI 53095-0179 U.S.A.www.gehl.com
