Final Ojt Report - Sestoso, Adan Raymond d
-
Upload
adan-raymond-sestoso -
Category
Documents
-
view
64 -
download
0
Transcript of Final Ojt Report - Sestoso, Adan Raymond d
1 | P a g e
Final ON-THE-JOB TRAINING REPORT SESTOSO, ADAN RAYMOND D. 2009-04089-MN-0 B.S. INTERIOR DESIGN
2 | P a g e
On the job training or OJT is one method by which students is given a chance to apply
the theories and computations that they have learned from the school. It also helps the students to
acquire relevant knowledge and skills by per forming in actual work setting. Colleges and
universities require their students to undergo such training within a specific number of hours as
part of the curriculum.
For the students, an OJT or internship program provides opportunities to go through the
actual methodologies of a specific job using the real tools, equipments and documents. In effect,
the workplace becomes a development venue for a student trainee to learn more about his chosen
field and practice what he has learn from academy.
On the other hand, an effective OJT program also benefits the companies who accept
trainees. First OJT or intern provides additional manpower for a lesser labor cost than a regular
employee. Most of them are all eager to learn the ropes so chances are high that they will
cooperate.
Employers can use this internship strategy as a method in recruiting new employees.
Since the trainer or the supervisor can follow the trainees’ progress, he can gauge based on
performance, behavior and attitude if the trainee will make a good recruit after the completion of
his internship.
Accommodating on-the-job trainees can truly be beneficial not only to the trainees but
also to the companies that provide opportunities for this type of learning. There is wisdom in the
front lines. Such training can be an investment that will be valuable to the company later on. This
is also why trainees should take their internship seriously as it can become a powerful tool and
INTRODUCTION
3 | P a g e
possibly even a source of recommendation when they take that big lift from being students to
career professionals.
In totality OJT Program is one of the most important experience that the student need as
part of the fulfillment of his/her studies. This experience helps student in preparation to the real
or actual work and It will provide knowledge and lessons that is very helpful in there daily life.
Personal Data
Name: Sestoso, Adan Raymond D.
Address: Blk. 13 lot 2 Purok 6 Zone 8 Cupang, Antipolo City
Cell No. : 09087077204
Email Address: [email protected]
Nationality: Filipino
Civil Status: Single
Date of Birth: April 13, 1993
Religion: Roman Catholic
Father’s Name: Eulogio M. Sestoso
Mother’s Name: Amy D. Sestoso
Language: English / Filipino
PERSONAL PROFILE
4 | P a g e
Educational Background
COLLEGE LEVEL : Polytechnic University of the Philippines 2009- Present
BS Interior Design
SECONDARY LEVEL : Cupang National High School 2005-2009
OLOPSHOA Purok 2 Zone 8 Brgy. Cupang, Antipolo City, Rizal
PRIMARY LEVEL : Cupang Elementary School 2002-2005
Villa Corazon Subd., Brgy. Cupang, Antipolo City, Rizal
: SSS Village Elementary School 1999-2002
: Little Angel Play Center 1998-1999
MC DACANAY ARCHITECTURAL DESIGN OFFICE - owned by Architect Manifelmo
Dacanay.
ERFE & ASSOCIATES
Erfe & Associates is located in J & F Building II, Cainta,, Philippines. Company is
working in Architectural & Interior Design services.
ACMI WORKPLACE DESIGN CENTER
COMPANY BACKGROUND
With the expanding economy & influx of foreign investors during the new millennium,
the demand for fast, easy and fashionable office set up was insatiable. WORKPLACE DESIGN
CENTER & ACMI Office Systems Phils. Inc., was born in the mid 2000, aiming to give the
working environment a look to welcome the 21st century. Designing the workplace has always
been our business. Custom made to fit your specifications plus making sure designs are practical,
functional and fashionable. Chairs ranging from ergonomic to a plain simple stool, executive
tables, worktop/counter top, shelves & cabinets (steel or wooden) and partitions, you name it we
can have it for you, Toilet partition, Restaurants, Canteen table and chairs. Harmony in the
COMPANY
5 | P a g e
workplace is what we work to achieve. Our team of highly competent professionals has
extensive exposure in their field of expertise. This group of designers and interior decorators are
ever so efficient to deal with the smallest details of each area in every layout to suit your
demand. Our company believes that every product leaving our store should have the guarantee of
good quality.
VISION
To be identified as the carrier of world’s best-known quality office furnishings & known
for being the most reliable in workplace environment setup
MISSION
To be recognized as a contributor in the field of office space management maintaining
our standard of service and reliability outdoing all others in the same industry.
COMMITMENT
Provide total client satisfaction through competent personnel and quality
LIST OF OFFICER
President: Richard Ngui
Vice President: Andrew Ngui
Secretary: Natalie Lim
Treasurer: Charity Ngui
General Manager: Catherina R. Luna
This chapter narrates the activities that the student trainees had gone through during the
training. This also includes the observation, participation, interaction and challenges during their
training.
ON-THE-JOB TRAININGACTIVITIES
6 | P a g e
NARRATIVE EXPERIENCE
M.C. DACANAY ARCHITECTURAL DESIGN OFFICE
April 02, 2012, it was the date when the trainee started the on the job training at M.C.
Dacanay Architectural Design Office. Archt. Manifelmo C. Dacanay was the owner of this office
since 25 years. It is an architectural services office situated at 8 Jones St. Filinvest Cainta, Rizal.
The trainee was assigned at the second floor of DreamHomes Condominium Project
where the employer gives the trainee an opportunity to make and design a bulletin board and an
information board in sketch up. The mentor of the trainee helps by teaching keyboard command
on sketch up and simple techniques in how to make a bulletin board and information board.
April 03, 2012, the trainee continued doing information center board for DreamHomes
Condominium project. After doing the information board on sketch up, the trainee assigned to
print PDF files and help in preparing of presentation drawings and plates.
April 11, 2012, the trainee was appointed at Jestoni Alarcon Project where the trainee
assigned to make a shop drawing of powder room cabinet and master’s T&B cabinet in
AutoCAD, and detailed it properly.
April 12, 2012, the trainee was still working on detailing the shop drawing of master’s
T&B. After working on detailing the shop drawing, the trainee assigned to encode in AutoCAD
the front elevation of the kitchen area of Jestoni Alarcon Project.
April 16, 2012, the trainee attended on the Bible Study of the office, and then the trainee
continued working with his unfinished task. After the trainee finished it, he assigned again at
DreamHomes Condominium Project. By this time, he assigned to make and design a shelving
7 | P a g e
and door of the cabinet at the kitchen of the said project. Then after that the trainee assigned to
encode in AutoCAD the floor plan of girl’s bedroom, kitchen, and family area.
April 17, 2012, the trainee assigned at Jestoni Alarcon Project and he assigned to encode
in AutoCAD the top view or plan of stairs, powder room and closet. After the trainee finished it,
he voluntary helps in the preparation of birthday celebration of his employer. The mentor of the
trainee assigned him to make a vicinity map of the venue of the Birthday celebration of the
trainee’s employer.
April 19, 2012, it was the day when the trainee finished his 50hrs OJT training in MC
Dacanay Office. The trainee assigned to encode in AutoCAD the sewer & drainage layout and
the lighting & power layout of CCT Palawan Commercial Center Project.
ERFE & ASSOCIATES
April 26, 2012, it was the date when the trainee started the on the job training at ERFE &
ASSOCIATES. Ma. Alicia B. Erfe, Arch., I.D. was the owner of this office. It is an architectural
& interior design services office situated at Room 204&206 J&F Building II V.V. Soliven Ave.,
Cainta, Rizal.
The trainee started his (4) four days work as an assistant and a helper. He helped in
preparation of plates/ drawings for blueprinting; helped in preparation of swatches board,
scanning of contract documents & report papers, arranging the swatches library and I.D.
sourcing.
May 03, 2012, the trainee was assigned at 2nd
floor study area of Lichauco Residence
Project where the trainee’s mentor assigned to encode the Family TV cabinet in AutoCAD. On
8 | P a g e
the following days, the trainee had already worked just like a regular employee of the ERFE &
ASSOCIATES.
May 11, 2012, it was the day when he appointed at Evaristo Unit Project where he
assigned to encode a plan and to make a 3D model/ perspective of TV cabinet at lining room.
May 15, 2012, it was the day when the trainee finished his 100hrs OJT training in ERFE
& ASSOCIATES and it was also his second day on the site. On the site, the trainee noticed that
most furniture in the unit/ project site was made of wood. He also noticed that the room was in
modern/ contemporary style. The mentor of the trainee assigned him to help in set- upping the
main areas of the room for tenant occupancy. He also learned how they install knock down
furniture through observing them and he helped in cleaning and sweeping the floor after the
installation of furniture.
ACMI WORKPLACE DESIGN CENTER
May 17, 2012, it was the date when the trainee started the on the job training at ACMI
WORKPLACE DESIGN CENTER. It is a supplier of office furniture and a furniture
manufacturing company situated at 464 Audrich Building Lt. Artiaga, San Juan City.
The trainee was assigned at AAW Inc. Project where the employer assigned to make a 3D
model or perspective of coffee table & display cabinet. It was very challenging to the trainee
because he is not already expert in AutoCAD 3D Model. Then after he finished it, the trainee
assigned to answer all phone calls that the company receives.
May 18, 2012, the trainee assigned at Art B. Piano Project and he assigned to make a
perspective or 3D model of hanging cabinet, executive table, side table, office tables, conference
9 | P a g e
table, and freestanding table. It was very pressure to the trainee because it was too many. After
the trainee finished it, he helps his mentor in the preparation of the Sales Report of their
company.
May 21, 2012, the trainee assigned to make a 3D model or perspective of steel cabinet/
locker and racks on AutoCAD. After the trainee finished it, his mentor gives him a time to read
magazines & books in their library.
May 22, 2012, because it is not a busy day the trainee gives time to use their computer in
social networking. After lunch the trainee assigned to make or design a proposed counter for
information area and render it on sketch up.
May 23, 2012, the trainee was appointed at GLC Project where his mentor gives an
opportunity to propose (3) three furniture layout for the 2nd
floor of GLC’s office. After he
finished it, he assigned to input the purchase order of their clients in Microsoft Excel.
May 24, 2012, At GLC Project, the trainee assigned again to design/ propose (2) two
reception counter in 3D mode. The trainee used sketch up in preparation of his proposal. After
doing his proposal, the trainee’s mentor assigned him to fax their quotation notes in the clients.
May 25, 2012, it was the day when the trainee finished his 50hrs OJT training in ACMI
Workplace Design Center. The trainee’s last assignment was to make a plan or top view of a
reception counter that the trainee proposed. After he finished it, he assigned to make and input a
quotation notes on Microsoft Excel.
Being an apprentice on that kind of offices/ companies was really remarkable. All the
skills and techniques that they shared with the trainee will help him for his future career.
OBSERVATION
10 | P a g e
The trainee who was training at different companies with the different field of practice,
observed the differences and their similarities. Another thing that the trainee observed was the
rules and regulation that the companies initiated. Before entering the company, regular frisking
and baggage inspections were conducted. Trainees are not included as a visitor. Another was the
NO smoking, sleeping and by standing rule. Gadgets like mobile phones and portable mp3
players are not allowed during working hours. Gadgets must be placed on the locker room/
pantry. Requests like emergency calls are accepted making sure that the call was important and
entertain able.
PARTICIPATION
The trainee participated in the normal operation of the company by maintaining the
cleanliness of the office. The trainee was participated in bible study of the office and also in
meetings and orientation.
The trainee also participated as a tool keeper on the office. Tools and materials must be
kept to avoid misplacing it. Tools must be clean before they were returned to the drawers and
tool box.
CHALLENGES
During the trainee’s on-the-job training, he met some challenges that push him to work
much better. First is when one of his co-workers challenged him to be greedy in learning new
things and skills. That is also the time when the trainee’s supervisor said that if he later want
high grade, he must work like a real employee. That was a big challenge for the trainee. He was
only a trainee, so the supervisor must supervise him and not to let him handle a situation than he
didn’t know. And because of that, the trainee learned to put a dedication to his work. Lastly, one
11 | P a g e
challenge that the trainee met was the climate during his
working hours on the field or in the office.
Architecture
M. C. Dacanay Architectural Design
Office
I. DAILY LOG TRAINING EXPERIENCE
II. WEEKLY ACCOMPLISHMENT REPORT
III. CERTIFICATION OF ACCEPTANCE
IV. MENTOR/ EMPLOYER’S PRC
V. EVALUATION FORM
12 | P a g e
POLYTECHNIC UNIVERSITY OF THE PHILIPPINES
COLLEGE OF ARCHITECTURE AND FINE ARTS
DEPARTMENT OF INTERIOR DESIGN PUP Engineering and Architecture BuildingNDC Compound,
Anonas cor. Pureza Sts., Sta. Mesa, Manila Tel: (632) 713 9304
BS INTERIOR DESIGN OJT REPORT
Daily Log of Training Experience
Date: April 02 , 2012
Name of Student: Sestoso Adan Raymond Deguitos Family Name First Name Middle Name
Office/Company Name: M. C. Dacanay Architectural Office
Address: 8 Jones St. Filinvest East Cainta, Rizal
Project Title: Dream Homes Condominium Project Description:
Project Location:
Assigned Work Task: Sketch-up Office Site Others, pls. specify
Time In : 1:05 p.m
Time Out : 6:14 p.m Total No. of Hour/s Spent: 4
Weather Condition: Sunny Site Condition:
Work Activities Performed:
Company Orientation
Bulletin Board & Information Area – Dream Homes Condominium
(Google Sketch Up)
Personal Observations at the Project Site:
13 | P a g e
Report/s Submitted, if any:
Lesson/s Learned:
I learned how to use the component and group command in Google sketch-up.
Picture/s Taken, if any:
Certified True and Correct by: Noted by:
ARCHT. MANIFELMO C. DACANAY
Mentor IDr. Billie Jean Dumlao-Dela Cruz, piid (Signature above Printed Name) Faculty OJT Coordinator
14 | P a g e
Date: April 02 , 2012 Date: ________________ , 2012
POLYTECHNIC UNIVERSITY OF THE PHILIPPINES
COLLEGE OF ARCHITECTURE AND FINE ARTS
DEPARTMENT OF INTERIOR DESIGN PUP Engineering and Architecture BuildingNDC Compound,
Anonas cor. Pureza Sts., Sta. Mesa, Manila Tel: (632) 713 9304
BS INTERIOR DESIGN OJT REPORT
Daily Log of Training Experience
Date: April 03 , 2012
Name of Student: Sestoso Adan Raymond Deguitos Family Name First Name Middle Name
Office/Company Name: M. C. Dacanay Architectural Office
Address: 8 Jones St. Filinvest East Cainta, Rizal
Project Title: Dream Homes Condominium Project Description:
Project Location:
Assigned Work Task: Sketch-up Office Site Others, pls. specify
Time In : 8:10 a.m.
Time Out : 6:25 p.m. Total No. of Hour/s Spent: 8
Weather Condition: Sunny Site Condition:
Work Activities Performed:
Continuation :Bulletin Board & Information Area – Dream Homes Condominium
(Google Sketch Up)
Office work -Printing PDF File
Preparation of Presentation Drawings
15 | P a g e
Personal Observations at the Project Site:
Report/s Submitted, if any:
Lesson/s Learned:
I learned how to prioritize time and to work fast. They taught me that I need to sketch or draw my plan first in notebook/ paper before I apply or encode it in Sketch Up.
I learned how to export 2D (Sketch up) to Google Lay out.
Picture/s Taken, if any:
Certified True and Correct by: Noted by:
ARCHT. MANIFELMO C. DACANAY
16 | P a g e
Mentor IDr. Billie Jean Dumlao-Dela Cruz, piid (Signature above Printed Name) Faculty OJT Coordinator
Date: April 03 , 2012 Date: ________________ , 2012
POLYTECHNIC UNIVERSITY OF THE PHILIPPINES
COLLEGE OF ARCHITECTURE AND FINE ARTS
DEPARTMENT OF INTERIOR DESIGN PUP Engineering and Architecture BuildingNDC Compound,
Anonas cor. Pureza Sts., Sta. Mesa, Manila Tel: (632) 713 9304
BS INTERIOR DESIGN OJT REPORT
Daily Log of Training Experience
Date: April 11 , 2012
Name of Student: Sestoso Adan Raymond Deguitos Family Name First Name Middle Name
Office/Company Name: M. C. Dacanay Architectural Office
Address: 8 Jones St. Filinvest East Cainta, Rizal
Project Title: Jestoni Alarcon Project Project Description:
Project Location:
Assigned Work Task: AutoCADD -Encoding Office Site Others, pls. specify
Time In : 8:30 a.m.
Time Out : 6:24 p.m. Total No. of Hour/s Spent: 8
Weather Condition: Sunny Site Condition:
Work Activities Performed:
Detailing in AutoCADD
Shop Drawing of Dressing/ Powder Room (Sectional) - Jestoni Alarcon Project
Detailing of Closet in Auto CADD- Master T&B (Top, Front, Sectional)
Jestoni Alarcon Project
Personal Observations at the Project Site:
17 | P a g e
Report/s Submitted, if any:
Lesson/s Learned:
I learned how to encode details in shop drawing by using Auto CADD
I learned also how to used (XL) and (MA) match property command in Auto CADD.
Picture/s Taken, if any:
Certified True and Correct by: Noted by:
ARCHT. MANIFELMO C. DACANAY
18 | P a g e
Mentor IDr. Billie Jean Dumlao-Dela Cruz, piid (Signature above Printed Name) Faculty OJT Coordinator
Date: April 11 , 2012 Date: ________________ , 2012
POLYTECHNIC UNIVERSITY OF THE PHILIPPINES
COLLEGE OF ARCHITECTURE AND FINE ARTS
DEPARTMENT OF INTERIOR DESIGN PUP Engineering and Architecture BuildingNDC Compound,
Anonas cor. Pureza Sts., Sta. Mesa, Manila Tel: (632) 713 9304
BS INTERIOR DESIGN OJT REPORT
Daily Log of Training Experience
Date: April 12 , 2012
Name of Student: Sestoso Adan Raymond Deguitos Family Name First Name Middle Name
Office/Company Name: M. C. Dacanay Architectural Office
Address: 8 Jones St. Filinvest East Cainta, Rizal
Project Title: Jestoni Alarcon Project Project Description:
Project Location:
Assigned Work Task: AutoCADD -Encoding Office Site Others, pls. specify
Time In : 8:05 a.m.
Time Out : 6:20 p.m. Total No. of Hour/s Spent: 8
Weather Condition: Sunny Site Condition:
Work Activities Performed:
Continuation: Detailing of Closet in Auto CADD- Master T&B (Top, Front, Sectional)
Jestoni Alarcon Project
Match property (MA)- Auto CADD (Kitchen: Front View) - Jestoni Alarcon Project
Color matching in Adobe Photoshop (DVPRO Plan) Tagaytay City Project
Personal Observations at the Project Site:
19 | P a g e
Report/s Submitted, if any:
Lesson/s Learned:
I learned how to apply color in a floor plan by using Adobe Photoshop.
Picture/s Taken, if any:
Certified True and Correct by: Noted by:
ARCHT. MANIFELMO C. DACANAY
Mentor IDr. Billie Jean Dumlao-Dela Cruz, piid (Signature above Printed Name) Faculty OJT Coordinator
20 | P a g e
Date: April 12 , 2012 Date: ________________ , 2012
POLYTECHNIC UNIVERSITY OF THE PHILIPPINES
COLLEGE OF ARCHITECTURE AND FINE ARTS
DEPARTMENT OF INTERIOR DESIGN PUP Engineering and Architecture BuildingNDC Compound,
Anonas cor. Pureza Sts., Sta. Mesa, Manila Tel: (632) 713 9304
BS INTERIOR DESIGN OJT REPORT
Daily Log of Training Experience
Date: April 16 , 2012
Name of Student: Sestoso Adan Raymond Deguitos Family Name First Name Middle Name
Office/Company Name: M. C. Dacanay Architectural Office
Address: 8 Jones St. Filinvest East Cainta, Rizal
Project Title: Project Description:
Project Location:
Assigned Work Task: AutoCADD -Encoding Office Site Others, pls. specify
Time In : 7:58 a.m.
Time Out : 6:04 p.m. Total No. of Hour/s Spent: 8
Weather Condition: Sunny Site Condition:
Work Activities Performed:
Continuation : Match property (MA) in Auto CADD – Kitchen Area
Jestoni Alarcon Project
Encoding in Auto CADD – Plan of Girl’s Bedroom, Kitchen, and Family Area
Dream Homes Condominium Project – Kitchen Area : Shelving and Doors of Cabinet
Google Sketch Up
Personal Observations at the Project Site:
21 | P a g e
Report/s Submitted, if any:
Lesson/s Learned:
I learned how to encode floor plans in Auto CADD
I learned ho to export sketch up(2D) to Auto CADD Drawing
I learned also to apply proper measurements of kitchen cabinet in sketch up
Picture/s Taken, if any:
Certified True and Correct by: Noted by:
ARCHT. MANIFELMO C. DACANAY
22 | P a g e
Mentor IDr. Billie Jean Dumlao-Dela Cruz, piid (Signature above Printed Name) Faculty OJT Coordinator
Date: April 16 , 2012 Date: ________________ , 2012
POLYTECHNIC UNIVERSITY OF THE PHILIPPINES
COLLEGE OF ARCHITECTURE AND FINE ARTS
DEPARTMENT OF INTERIOR DESIGN PUP Engineering and Architecture BuildingNDC Compound,
Anonas cor. Pureza Sts., Sta. Mesa, Manila Tel: (632) 713 9304
BS INTERIOR DESIGN OJT REPORT
Daily Log of Training Experience
Date: April 17 , 2012
Name of Student: Sestoso Adan Raymond Deguitos Family Name First Name Middle Name
Office/Company Name: M. C. Dacanay Architectural Office
Address: 8 Jones St. Filinvest East Cainta, Rizal
Project Title: Project Description:
Project Location:
Assigned Work Task: AutoCADD & SketchUp Office Site Others, pls. specify
Time In : 7:54 a.m.
Time Out : 6:42 p.m. Total No. of Hour/s Spent: 8
Weather Condition: Sunny Site Condition:
Work Activities Performed:
Encoding – Auto CADD
Plan of Stairs, Family Area, Powder Room, and Closet
Vicinity map – ( Sketch Up) Venue of Birthday celebration of Archt. Dacanay
Manual Drawing and measurements of Isometrical view of Parking Ramp
Renovation: Parking lot of Archt. Dacanay House
23 | P a g e
Personal Observations at the Project Site:
Report/s Submitted, if any:
Lesson/s Learned:
Today, I learned how to encode floor plan of stairs, powder room and closet.
I learned how to use PLOT command in Auto CADD
I learned also how to properly measure a parking ramp; what materials to be used.
Picture/s Taken, if any:
Certified True and Correct by: Noted by:
24 | P a g e
ARCHT. MANIFELMO C. DACANAY
Mentor IDr. Billie Jean Dumlao-Dela Cruz, piid (Signature above Printed Name) Faculty OJT Coordinator
Date: April 17 , 2012 Date: ________________ , 2012
POLYTECHNIC UNIVERSITY OF THE PHILIPPINES
COLLEGE OF ARCHITECTURE AND FINE ARTS
DEPARTMENT OF INTERIOR DESIGN PUP Engineering and Architecture BuildingNDC Compound,
Anonas cor. Pureza Sts., Sta. Mesa, Manila Tel: (632) 713 9304
BS INTERIOR DESIGN OJT REPORT
Daily Log of Training Experience
Date: April 19 , 2012
Name of Student: Sestoso Adan Raymond Deguitos Family Name First Name Middle Name
Office/Company Name: M. C. Dacanay Architectural Office
Address: 8 Jones St. Filinvest East Cainta, Rizal
Project Title: CCT Palawan Project Project Description:
Project Location:
Assigned Work Task: AutoCADD -Encoding Office Site Others, pls. specify
Time In : 7:53 a.m.
Time Out : 6:41 p.m. Total No. of Hour/s Spent: 8
Weather Condition: Sunny Site Condition:
Work Activities Performed:
Encoding Sewer and Drainage Layout in Auto CADD
(CCT Palawan Commercial Center)
Encoding Lighting and Power Layout in Auto CADD
(CCT Palawan Commercial Center)
Personal Observations at the Project Site:
25 | P a g e
Report/s Submitted, if any:
Lesson/s Learned:
I learned how to encode electrical symbols, switch connections, sewer layout and drainage layout in Auto CADD
I learned also how to put legend in Auto CADD
Picture/s Taken, if any:
Certified True and Correct by: Noted by:
ARCHT. MANIFELMO C. DACANAY
26 | P a g e
Mentor IDr. Billie Jean Dumlao-Dela Cruz, piid (Signature above Printed Name) Faculty OJT Coordinator
Date: April 19 , 2012 Date: ________________ , 2012
CERTIFICATION OF ACCEPTANCE
27 | P a g e
WEEKLY ACCOMPLISHMENT REPORT Page 1
28 | P a g e
WEEKLY ACCOMPLISHMENT REPORT Page 2
29 | P a g e
30 | P a g e
EVALUATION FORM – MC DACANAY ARCHITECTURAL DESIGN OFFICE
31 | P a g e
Interior Design Firm
ERFE & ASSOCIATES
- Erfe & Associates is located in J & F Building II, Cainta,, Philippines. Company is working in Architectural & Interior Design services.
I. DAILY LOG
TRAINING EXPERIENCE
II. WEEKLY ACCOMPLISHMENT REPORT
III. CERTIFICATION OF ACCEPTANCE
IV. MENTOR/ EMPLOYER’S PRC
V. EVALUATION FORM
32 | P a g e
POLYTECHNIC UNIVERSITY OF THE PHILIPPINES
COLLEGE OF ARCHITECTURE AND FINE ARTS
DEPARTMENT OF INTERIOR DESIGN PUP Engineering and Architecture BuildingNDC Compound,
Anonas cor. Pureza Sts., Sta. Mesa, Manila Tel: (632) 713 9304
BS INTERIOR DESIGN OJT REPORT
Daily Log of Training Experience
Date: April 26 , 2012
Name of Student: Sestoso Adan Raymond Deguitos Family Name First Name Middle Name
Office/Company Name: ERFE & ASSOCIATES
Address: Room 204 & 206, J & F Building II V.V. Soliven Ave., Cainta, Rizal
Project Title: Edades Tower & Garden Project Description:
Project Location: Villas Rockwell Center, Makati City
Assigned Work Task: AutoCADD -Encoding Office Site Others, pls. specify
Time In : 9:00 a.m.
Time Out : 6:00 p.m. Total No. of Hour/s Spent: 8 hrs.
Weather Condition: Sunny Site Condition:
Work Activities Performed:
Preparation of contract drawings for blueprinting
Scanning of contact documents & report papers.
Personal Observations at the Project Site:
33 | P a g e
Report/s Submitted, if any:
Lesson/s Learned:
Picture/s Taken, if any:
Certified True and Correct by: Noted by:
IDr. Billie Jean Dumlao-Dela Cruz, piid Faculty OJT Coordinator
Date: April 26 , 2012 Date: ________________ , 2012
34 | P a g e
POLYTECHNIC UNIVERSITY OF THE PHILIPPINES
COLLEGE OF ARCHITECTURE AND FINE ARTS
DEPARTMENT OF INTERIOR DESIGN PUP Engineering and Architecture BuildingNDC Compound,
Anonas cor. Pureza Sts., Sta. Mesa, Manila Tel: (632) 713 9304
BS INTERIOR DESIGN OJT REPORT
Daily Log of Training Experience
Date: April 27 , 2012
Name of Student: Sestoso Adan Raymond Deguitos Family Name First Name Middle Name
Office/Company Name: ERFE & ASSOCIATES
Address: Room 204 & 206, J & F Building II V.V. Soliven Ave., Cainta, Rizal
Project Title: CITADINES Project Project Description:
Project Location: Salcedo, Makati City
Assigned Work Task: Office Site Others, pls. specify
Time In : 9:00 a.m.
Time Out : 6:00 p.m. Total No. of Hour/s Spent: 8 hrs.
Weather Condition: Sunny Site Condition:
Work Activities Performed:
Preparation of contract drawings for blueprinting
Helps in preparation of swatch boards.
Personal Observations at the Project Site:
35 | P a g e
Report/s Submitted, if any:
Lesson/s Learned:
Picture/s Taken, if any:
Certified True and Correct by: Noted by:
IDr. Billie Jean Dumlao-Dela Cruz, piid Faculty OJT Coordinator
Date: April 27 , 2012 Date: ________________ , 2012
36 | P a g e
POLYTECHNIC UNIVERSITY OF THE PHILIPPINES
COLLEGE OF ARCHITECTURE AND FINE ARTS
DEPARTMENT OF INTERIOR DESIGN PUP Engineering and Architecture BuildingNDC Compound,
Anonas cor. Pureza Sts., Sta. Mesa, Manila Tel: (632) 713 9304
BS INTERIOR DESIGN OJT REPORT
Daily Log of Training Experience
Date: April 30 , 2012
Name of Student: Sestoso Adan Raymond Deguitos Family Name First Name Middle Name
Office/Company Name: ERFE & ASSOCIATES
Address: Room 204 & 206, J & F Building II V.V. Soliven Ave., Cainta, Rizal
Project Title: Edades Tower & Garden Villas Project Description:
Project Location: Villas Rockwell Center, Makati City
Assigned Work Task: Office Site Others, pls. specify
Time In : 9:00 a.m.
Time Out : 6:00 p.m. Total No. of Hour/s Spent: 8 hrs.
Weather Condition: Sunny Site Condition:
Work Activities Performed:
Preparation of contract drawings for blueprinting (For Submission to the contractor)
- The Grove Amenity 5th & 6th floor E. Rodriguez Ave., C-5 Road, Brgy. Ugong, Pasig
City; helps in preparation of the contract drawings.
Personal Observations at the Project Site:
37 | P a g e
Report/s Submitted, if any:
Lesson/s Learned:
Picture/s Taken, if any:
Certified True and Correct by: Noted by:
IDr. Billie Jean Dumlao-Dela Cruz, piid Faculty OJT Coordinator
Date: April 30 , 2012 Date: ________________ , 2012
38 | P a g e
POLYTECHNIC UNIVERSITY OF THE PHILIPPINES
COLLEGE OF ARCHITECTURE AND FINE ARTS
DEPARTMENT OF INTERIOR DESIGN PUP Engineering and Architecture BuildingNDC Compound,
Anonas cor. Pureza Sts., Sta. Mesa, Manila Tel: (632) 713 9304
BS INTERIOR DESIGN OJT REPORT
Daily Log of Training Experience
Date: May 02 , 2012
Name of Student: Sestoso Adan Raymond Deguitos Family Name First Name Middle Name
Office/Company Name: ERFE & ASSOCIATES
Address: Room 204 & 206, J & F Building II V.V. Soliven Ave., Cainta, Rizal
Project Title CITADINES – Mock- up Unit Project Description: I.D. Sourcing
Project Location: Salcedo , Makati City
Assigned Work Task: Schedule of Appliances Office Site Others, pls. specify
Time In : 9:00 a.m.
Time Out : 6:00 p.m. Total No. of Hour/s Spent: 8 hrs.
Weather Condition: Sunny Site Condition:
Work Activities Performed:
I.D. Sourcing – Schedule of Appliances (Microsoft Excel)
Fixing the Paint Library
Scanning of Contract documents and report papers.
Personal Observations at the Project Site:
39 | P a g e
Report/s Submitted, if any:
Lesson/s Learned:
Picture/s Taken, if any:
Certified True and Correct by: Noted by:
IDr. Billie Jean Dumlao-Dela Cruz, piid Faculty OJT Coordinator
Date: May 02 , 2012 Date: ________________ , 2012
40 | P a g e
POLYTECHNIC UNIVERSITY OF THE PHILIPPINES
COLLEGE OF ARCHITECTURE AND FINE ARTS
DEPARTMENT OF INTERIOR DESIGN PUP Engineering and Architecture BuildingNDC Compound,
Anonas cor. Pureza Sts., Sta. Mesa, Manila Tel: (632) 713 9304
BS INTERIOR DESIGN OJT REPORT
Daily Log of Training Experience
Date: May 03 , 2012
Name of Student: Sestoso Adan Raymond Deguitos Family Name First Name Middle Name
Office/Company Name: ERFE & ASSOCIATES
Address: Room 204 & 206, J & F Building II V.V. Soliven Ave., Cainta, Rizal
Project Title: LICHAUCO Residence Project Project Description: Furniture
Project Location: #23 Leo St., Bel-air , Makati City
Assigned Work Task: AutoCADD Office Site Others, pls. specify
Time In : 9:00 a.m.
Time Out : 6:00 p.m. Total No. of Hour/s Spent: 8 hrs.
Weather Condition: Cloudy Site Condition:
Work Activities Performed:
Encoding – AutoCADD
2/f Study/ Family TV CABINET – Lichauco Residence
Personal Observations at the Project Site:
41 | P a g e
Report/s Submitted, if any:
Lesson/s Learned:
Picture/s Taken, if any:
Certified True and Correct by: Noted by:
IDr. Billie Jean Dumlao-Dela Cruz, piid Faculty OJT Coordinator
Date: May 03 , 2012 Date: ________________ , 2012
42 | P a g e
POLYTECHNIC UNIVERSITY OF THE PHILIPPINES
COLLEGE OF ARCHITECTURE AND FINE ARTS
DEPARTMENT OF INTERIOR DESIGN PUP Engineering and Architecture BuildingNDC Compound,
Anonas cor. Pureza Sts., Sta. Mesa, Manila Tel: (632) 713 9304
BS INTERIOR DESIGN OJT REPORT
Daily Log of Training Experience
Date: May 04 , 2012
Name of Student: Sestoso Adan Raymond Deguitos Family Name First Name Middle Name
Office/Company Name: ERFE & ASSOCIATES
Address: Room 204 & 206, J & F Building II V.V. Soliven Ave., Cainta, Rizal
Project Title: Edades Tower & Garden Project Description:
Project Location: Villas Rockwell Center, Makati City
Assigned Work Task: Preparation of Plates Office Site Others, pls. specify
Time In : 9:00 a.m.
Time Out : 6:00 p.m. Total No. of Hour/s Spent: 8 hrs.
Weather Condition: Rainy Site Condition:
Work Activities Performed:
Preparation of contract drawings/ plates for blueprinting (Coloring the plates)
Measuring the sizes of the pictures for framing .
Personal Observations at the Project Site:
43 | P a g e
Report/s Submitted, if any:
Lesson/s Learned:
-
Picture/s Taken, if any:
Certified True and Correct by: Noted by:
IDr. Billie Jean Dumlao-Dela Cruz, piid Faculty OJT Coordinator
Date: May 04 , 2012 Date: ________________ , 2012
44 | P a g e
POLYTECHNIC UNIVERSITY OF THE PHILIPPINES
COLLEGE OF ARCHITECTURE AND FINE ARTS
DEPARTMENT OF INTERIOR DESIGN PUP Engineering and Architecture BuildingNDC Compound,
Anonas cor. Pureza Sts., Sta. Mesa, Manila Tel: (632) 713 9304
BS INTERIOR DESIGN OJT REPORT
Daily Log of Training Experience
Date: May 07 , 2012
Name of Student: Sestoso Adan Raymond Deguitos Family Name First Name Middle Name
Office/Company Name: ERFE & ASSOCIATES
Address: Room 204 & 206, J & F Building II V.V. Soliven Ave., Cainta, Rizal
Project Title: Project Description:
Project Location:
Assigned Work Task: Preparation of plates Office Site Others, pls. specify
Time In : 9:00 a.m.
Time Out : 6:00 p.m. Total No. of Hour/s Spent: 8 hrs.
Weather Condition: Sunny Site Condition:
Work Activities Performed:
Continuation of preparation of contract drawings/ plates for blueprinting (Coloring the plates)
Tansipek Residence – Paint Finish Specification / Description
Preparation Of Swatch Boards
Citadines Salcedo Makati City
Personal Observations at the Project Site:
Report/s Submitted, if any:
45 | P a g e
Lesson/s Learned:
Picture/s Taken, if any:
Certified True and Correct by: Noted by:
IDr. Billie Jean Dumlao-Dela Cruz, piid Faculty OJT Coordinator
Date: May 07 , 2012 Date: ________________ , 2012
46 | P a g e
POLYTECHNIC UNIVERSITY OF THE PHILIPPINES
COLLEGE OF ARCHITECTURE AND FINE ARTS
DEPARTMENT OF INTERIOR DESIGN PUP Engineering and Architecture BuildingNDC Compound,
Anonas cor. Pureza Sts., Sta. Mesa, Manila Tel: (632) 713 9304
BS INTERIOR DESIGN OJT REPORT
Daily Log of Training Experience
Date: May 08 , 2012
Name of Student: Sestoso Adan Raymond Deguitos Family Name First Name Middle Name
Office/Company Name: ERFE & ASSOCIATES
Address: Room 204 & 206, J & F Building II V.V. Soliven Ave., Cainta, Rizal
Project Title: James Chua Unit Project Description:
Project Location: 3507 One Roackwell West, Makati City
Assigned Work Task: Office Site Others, pls. specify
Time In : 9:00 a.m.
Time Out : 6:00 p.m. Total No. of Hour/s Spent: 8 hrs.
Weather Condition: Sunny Site Condition:
Work Activities Performed:
I. D. Sourcing – James Chua Unit - Finding Sheer Fabrics & Heavy Drape
Preparation of contract drawings/ plates for blue printing.
Personal Observations at the Project Site:
47 | P a g e
Report/s Submitted, if any:
Lesson/s Learned:
Picture/s Taken, if any:
Certified True and Correct by: Noted by:
IDr. Billie Jean Dumlao-Dela Cruz, piid Faculty OJT Coordinator
Date: May 08 , 2012 Date: ________________ , 2012
48 | P a g e
POLYTECHNIC UNIVERSITY OF THE PHILIPPINES
COLLEGE OF ARCHITECTURE AND FINE ARTS
DEPARTMENT OF INTERIOR DESIGN PUP Engineering and Architecture BuildingNDC Compound,
Anonas cor. Pureza Sts., Sta. Mesa, Manila Tel: (632) 713 9304
BS INTERIOR DESIGN OJT REPORT
Daily Log of Training Experience
Date: May 09 , 2012
Name of Student: Sestoso Adan Raymond Deguitos Family Name First Name Middle Name
Office/Company Name: ERFE & ASSOCIATES
Address: Room 204 & 206, J & F Building II V.V. Soliven Ave., Cainta, Rizal
Project Title: Edades Tower & Garden Villas Project Description:
Project Location: Rockwell Center, Makati City
Assigned Work Task: Office Site Others, pls. specify
Time In : 9:00 a.m.
Time Out : 6:00 p.m. Total No. of Hour/s Spent: 8 hrs.
Weather Condition: Fair weather Site Condition:
Work Activities Performed:
Preparation of contract drawings/ plates for blueprinting
Photo printing of pictures in TroniX – Q Plaza, Cainta
Help in preparation of swatch board - Finding Kimono Violet paint swatch on paint library
Personal Observations at the Project Site:
49 | P a g e
Report/s Submitted, if any:
Lesson/s Learned:
Picture/s Taken, if any:
Certified True and Correct by: Noted by:
IDr. Billie Jean Dumlao-Dela Cruz, piid Faculty OJT Coordinator
Date: May 09 , 2012 Date: ________________ , 2012
50 | P a g e
POLYTECHNIC UNIVERSITY OF THE PHILIPPINES
COLLEGE OF ARCHITECTURE AND FINE ARTS
DEPARTMENT OF INTERIOR DESIGN PUP Engineering and Architecture BuildingNDC Compound,
Anonas cor. Pureza Sts., Sta. Mesa, Manila Tel: (632) 713 9304
BS INTERIOR DESIGN OJT REPORT
Daily Log of Training Experience
Date: May 10 , 2012
Name of Student: Sestoso Adan Raymond Deguitos Family Name First Name Middle Name
Office/Company Name: ERFE & ASSOCIATES
Address: Room 204 & 206, J & F Building II V.V. Soliven Ave., Cainta, Rizal
Project Title: Project Description:
Project Location:
Assigned Work Task: Office Site Others, pls. specify
Time In : 9:00 a.m.
Time Out : 6:00 p.m. Total No. of Hour/s Spent: 8 hrs.
Weather Condition: Sunny Site Condition:
Work Activities Performed:
Arranging of Fabrics swatches, carpets, sheers, and leathers given by the supplier.
Preparation of Plates/ Drawing for blueprinting (Coloring the plates)
Personal Observations at the Project Site:
51 | P a g e
Report/s Submitted, if any:
Lesson/s Learned:
Picture/s Taken, if any:
Certified True and Correct by: Noted by:
IDr. Billie Jean Dumlao-Dela Cruz, piid Faculty OJT Coordinator
Date: May 10 , 2012 Date: ________________ , 2012
52 | P a g e
POLYTECHNIC UNIVERSITY OF THE PHILIPPINES
COLLEGE OF ARCHITECTURE AND FINE ARTS
DEPARTMENT OF INTERIOR DESIGN PUP Engineering and Architecture BuildingNDC Compound,
Anonas cor. Pureza Sts., Sta. Mesa, Manila Tel: (632) 713 9304
BS INTERIOR DESIGN OJT REPORT
Daily Log of Training Experience
Date: May 11 , 2012
Name of Student: Sestoso Adan Raymond Deguitos Family Name First Name Middle Name
Office/Company Name: ERFE & ASSOCIATES
Address: Room 204 & 206, J & F Building II V.V. Soliven Ave., Cainta, Rizal
Project Title: Evaristo Unit Project Description: Furniture
Project Location:
Assigned Work Task: Sketch up Office Site Others, pls. specify
Time In : 9:00 a.m.
Time Out : 6:00 p.m. Total No. of Hour/s Spent: 8 hrs.
Weather Condition: Cloudy Site Condition:
Work Activities Performed:
Encoding & Making a Perspective of TV Cabinet @ Living Room (Vanishing Finish) Evaristo Unit in Sketch up
Personal Observations at the Project Site:
Report/s Submitted, if any:
53 | P a g e
Lesson/s Learned:
- I learned how to make a TV cabinet in Sketch up
Picture/s Taken, if any:
Certified True and Correct by: Noted by:
IDr. Billie Jean Dumlao-Dela Cruz, piid Faculty OJT Coordinator
Date: May 11 , 2012 Date: ________________ , 2012
54 | P a g e
POLYTECHNIC UNIVERSITY OF THE PHILIPPINES
COLLEGE OF ARCHITECTURE AND FINE ARTS
DEPARTMENT OF INTERIOR DESIGN PUP Engineering and Architecture BuildingNDC Compound,
Anonas cor. Pureza Sts., Sta. Mesa, Manila Tel: (632) 713 9304
BS INTERIOR DESIGN OJT REPORT
Daily Log of Training Experience
Date: May 14 , 2012
Name of Student: Sestoso Adan Raymond Deguitos Family Name First Name Middle Name
Office/Company Name: ERFE & ASSOCIATES
Address: Room 204 & 206, J & F Building II V.V. Soliven Ave., Cainta, Rizal
Project Title: Mark Lopez Project Project Description:
Project Location: 3916 One Rockwell West, Makati City
Assigned Work Task: Site Visit Office Site Others, pls. specify
Time In : 9:00 a.m.
Time Out : 6:00 p.m. Total No. of Hour/s Spent: 8 hrs.
Weather Condition: Sunny Site Condition:
Work Activities Performed:
Observing how they install knock- down furniture
Assisting/ helping the workers in installing knock- down furniture
and help in cleaning and sweeping the floor after the installation of furniture
Personal Observations at the Project Site:
- The unit was small but all of the space was rearranged properly. - They use wood laminated vinyl in flooring - The unit/ room used neutral color. - The space provides natural ventilation and natural light.
55 | P a g e
Report/s Submitted, if any:
- I learned how to properly install the knock down furniture.
Lesson/s Learned:
Picture/s Taken, if any:
Certified True and Correct by: Noted by:
IDr. Billie Jean Dumlao-Dela Cruz, piid Faculty OJT Coordinator
Date: May 14 , 2012 Date: ________________ , 2012
56 | P a g e
POLYTECHNIC UNIVERSITY OF THE PHILIPPINES
COLLEGE OF ARCHITECTURE AND FINE ARTS
DEPARTMENT OF INTERIOR DESIGN PUP Engineering and Architecture BuildingNDC Compound,
Anonas cor. Pureza Sts., Sta. Mesa, Manila Tel: (632) 713 9304
BS INTERIOR DESIGN OJT REPORT
Daily Log of Training Experience
Date: May 15 , 2012
Name of Student: Sestoso Adan Raymond Deguitos Family Name First Name Middle Name
Office/Company Name: ERFE & ASSOCIATES
Address: Room 204 & 206, J & F Building II V.V. Soliven Ave., Cainta, Rizal
Project Title: Mark Lopez Project Project Description:
Project Location: 3916 One Rockwell West, Makati City
Assigned Work Task: Site Visit Office Site Others, pls. specify
Time In : 9:00 a.m.
Time Out : 6:00 p.m. Total No. of Hour/s Spent: 8 hrs.
Weather Condition: Sunny Site Condition:
Work Activities Performed:
Helps in set- upping the main areas of the unit for tenant occupancy.
Observing how they install knock- down furniture
Assisting/ helping the workers in installing knock- down furniture
and help in cleaning and sweeping the floor after the installation of furniture
Personal Observations at the Project Site:
- All furniture were in modern/ contemporary style - All furniture used in the unit/ room are made of wood.
57 | P a g e
Report/s Submitted, if any:
Lesson/s Learned:
- I learned how to rearrange the furniture and how to take care of the furniture. For example, what cleaner shall we use in wood? in fabric?
Picture/s Taken, if any:
Certified True and Correct by: Noted by:
IDr. Billie Jean Dumlao-Dela Cruz, piid Faculty OJT Coordinator
Date: May 15 , 2012 Date: ________________ , 2012
58 | P a g e
CERTIFICATION OF ACCEPTANCE
59 | P a g e
On-The-Job Training Weekly Accomplishment Report Page 1
60 | P a g e
On-The-Job Training Weekly Accomplishment Report Page 2
61 | P a g e
62 | P a g e
63 | P a g e
EVALUATION FORM – ERFE & ASSOCIATES
64 | P a g e
Furniture Manufacturing Office
ACMI WORKPLACE DESIGN CENTER
- Acmi Workplace Design Center is located in San Juan, Philippines. Company is working in General office services, Office furniture, Furniture manufacturer and designer.
I. Daily log of Training experience II. On-The-Job Training Weekly Accomplishment Report III. Certification of Acceptance IV. PRC & PTR Receipt V. Evaluation Form
65 | P a g e
POLYTECHNIC UNIVERSITY OF THE PHILIPPINES
COLLEGE OF ARCHITECTURE AND FINE ARTS
DEPARTMENT OF INTERIOR DESIGN PUP Engineering and Architecture BuildingNDC Compound,
Anonas cor. Pureza Sts., Sta. Mesa, Manila Tel: (632) 713 9304
BS INTERIOR DESIGN OJT REPORT
Daily Log of Training Experience
Date: May 17 , 2012
Name of Student: Sestoso Adan Raymond Deguitos Family Name First Name Middle Name
Office/Company Name: ACMI/ WORKPLACE DESIGN CENTER
Address: 464 Audrich Building Lt. Artiaga St. San Juan City
Project Title: AAW INC. Project Project Description:
Project Location:
Assigned Work Task: AutoCAD Office Site Others, pls. specify
Time In : 8:19 a.m.
Time Out : 12:30 p.m. Total No. of Hour/s Spent: 4 hrs.
Weather Condition: Sunny Site Condition:
Work Activities Performed:
AutoCAD – Perspective of coffee/ center table & display cabinet AAW Inc.
Personal Observations at the Project Site:
66 | P a g e
Report/s Submitted, if any:
Lesson/s Learned:
- I learned how to used 3D modeling in AutoCAD because I’m not already expert in 3D modeling and rendering.
Picture/s Taken, if any:
Certified True and Correct by: Noted by:l
Mentor IDr. Billie Jean Dumlao-Dela Cruz, piid (Signature above Printed Name) Faculty OJT Coordinator
Date: May 25 , 2012 Date: ________________ , 2012
67 | P a g e
POLYTECHNIC UNIVERSITY OF THE PHILIPPINES
COLLEGE OF ARCHITECTURE AND FINE ARTS
DEPARTMENT OF INTERIOR DESIGN PUP Engineering and Architecture BuildingNDC Compound,
Anonas cor. Pureza Sts., Sta. Mesa, Manila Tel: (632) 713 9304
BS INTERIOR DESIGN OJT REPORT
Daily Log of Training Experience
Date: May 18 , 2012
Name of Student: Sestoso Adan Raymond Deguitos Family Name First Name Middle Name
Office/Company Name: ACMI/ WORKPLACE DESIGN CENTER
Address: 464 Audrich Building Lt. Artiaga St. San Juan City
Project Title: Art B. Piano Project Project Description:
Project Location:
Assigned Work Task: Google Sketch up Office Site Others, pls. specify
Time In : 8:19 a.m.
Time Out : 07:15 p.m. Total No. of Hour/s Spent: 8 hrs.
Weather Condition: Sunny Site Condition:
Work Activities Performed:
Sketch Up – Perspective and Dimension of Hanging cabinet, Executive table, Side table, Office tables, Conference table.
Personal Observations at the Project Site:
68 | P a g e
Report/s Submitted, if any:
Lesson/s Learned:
- I learned the standard dimension/size for the office tables and cabinet.
Picture/s Taken, if any:
Certified True and Correct by: Noted by:l
Mentor IDr. Billie Jean Dumlao-Dela Cruz, piid (Signature above Printed Name) Faculty OJT Coordinator
Date: May 25 , 2012 Date: ________________ , 2012
69 | P a g e
COLLEGE OF ARCHITECTURE AND FINE ARTS
DEPARTMENT OF INTERIOR DESIGN PUP Engineering and Architecture BuildingNDC Compound,
Anonas cor. Pureza Sts., Sta. Mesa, Manila Tel: (632) 713 9304
BS INTERIOR DESIGN OJT REPORT
Daily Log of Training Experience
Date: May 21 , 2012
Name of Student: Sestoso Adan Raymond Deguitos Family Name First Name Middle Name
Office/Company Name: ACMI/ WORKPLACE DESIGN CENTER
Address: 464 Audrich Building Lt. Artiaga St. San Juan City
Project Title: Project Description:
Project Location:
Assigned Work Task: AutoCADD Office Site Others, pls. specify
Time In : 8:02 a.m.
Time Out : 07:07 p.m. Total No. of Hour/s Spent: 8 hrs.
Weather Condition: Rainy Site Condition:
Work Activities Performed:
AutoCAD – Perspective of Steel Cabinet/ Locker & Racks for Preparation in quotation.
Personal Observations at the Project Site:
70 | P a g e
Report/s Submitted, if any:
Lesson/s Learned:
- I learned the standard dimension/size for the Steel Locker & Racks.
Picture/s Taken, if any:
Certified True and Correct by: Noted by:l
Mentor IDr. Billie Jean Dumlao-Dela Cruz, piid (Signature above Printed Name) Faculty OJT Coordinator
Date: May 25 , 2012 Date: ________________ , 2012
71 | P a g e
COLLEGE OF ARCHITECTURE AND FINE ARTS
DEPARTMENT OF INTERIOR DESIGN PUP Engineering and Architecture BuildingNDC Compound,
Anonas cor. Pureza Sts., Sta. Mesa, Manila Tel: (632) 713 9304
BS INTERIOR DESIGN OJT REPORT
Daily Log of Training Experience
Date: May 22 , 2012
Name of Student: Sestoso Adan Raymond Deguitos Family Name First Name Middle Name
Office/Company Name: ACMI/ WORKPLACE DESIGN CENTER
Address: 464 Audrich Building Lt. Artiaga St. San Juan City
Project Title: Project Description:
Project Location:
Assigned Work Task: Sketch Up Office Site Others, pls. specify
Time In : 08:03 a.m.
Time Out : 07:09 p.m. Total No. of Hour/s Spent: 8 hrs.
Weather Condition: Sunny Site Condition:
Work Activities Performed:
Sketch Up – Make a proposed counter @ Information Area
Personal Observations at the Project Site:
72 | P a g e
Report/s Submitted, if any:
Lesson/s Learned:
- I learned how to make information counter in sketch up.
Picture/s Taken, if any:
Certified True and Correct by: Noted by:l
Mentor IDr. Billie Jean Dumlao-Dela Cruz, piid (Signature above Printed Name) Faculty OJT Coordinator
Date: May 25 , 2012 Date: ________________ , 2012
73 | P a g e
COLLEGE OF ARCHITECTURE AND FINE ARTS
DEPARTMENT OF INTERIOR DESIGN PUP Engineering and Architecture BuildingNDC Compound,
Anonas cor. Pureza Sts., Sta. Mesa, Manila Tel: (632) 713 9304
BS INTERIOR DESIGN OJT REPORT
Daily Log of Training Experience
Date: May 23 , 2012
Name of Student: Sestoso Adan Raymond Deguitos Family Name First Name Middle Name
Office/Company Name: ACMI/ WORKPLACE DESIGN CENTER
Address: 464 Audrich Building Lt. Artiaga St. San Juan City
Project Title: GLC Project Project Description:
Project Location:
Assigned Work Task: AutoCADD Office Site Others, pls. specify
Time In : 7:57 a.m.
Time Out : 07:06 p.m. Total No. of Hour/s Spent: 8 hrs.
Weather Condition: Sunny Site Condition:
Work Activities Performed:
AutoCAdd – Make a proposed furniture layout ( 2D drafting & annotation) GLC Project
Personal Observations at the Project Site:
74 | P a g e
Report/s Submitted, if any:
Lesson/s Learned:
- I learned how to make a proposed furniture layout in AutoCAD
- I also learned how to input purchase order in Microsoft Excel
Picture/s Taken, if any:
Certified True and Correct by: Noted by:l
Mentor IDr. Billie Jean Dumlao-Dela Cruz, piid (Signature above Printed Name) Faculty OJT Coordinator
Date: May 25 , 2012 Date: ________________ , 2012
75 | P a g e
COLLEGE OF ARCHITECTURE AND FINE ARTS
DEPARTMENT OF INTERIOR DESIGN PUP Engineering and Architecture BuildingNDC Compound,
Anonas cor. Pureza Sts., Sta. Mesa, Manila Tel: (632) 713 9304
BS INTERIOR DESIGN OJT REPORT
Daily Log of Training Experience
Date: May 24 , 2012
Name of Student: Sestoso Adan Raymond Deguitos Family Name First Name Middle Name
Office/Company Name: ACMI/ WORKPLACE DESIGN CENTER
Address: 464 Audrich Building Lt. Artiaga St. San Juan City
Project Title: GLC Project Project Description:
Project Location:
Assigned Work Task: Sketch Up Office Site Others, pls. specify
Time In : 07:58 a.m.
Time Out : 07:07 p.m. Total No. of Hour/s Spent: 8 hrs.
Weather Condition: Cloudy Site Condition:
Work Activities Performed:
AutoCAdd – Design/ make 3D model of a proposed reception counter 2 Proposed Reception Counter
Personal Observations at the Project Site:
76 | P a g e
Report/s Submitted, if any:
Lesson/s Learned:
- I learned how to make a reception area in sketch up.
- I also learned how to used fax machine because I didn’t know how to use it before.
Picture/s Taken, if any:
Certified True and Correct by: Noted by:l
Mentor IDr. Billie Jean Dumlao-Dela Cruz, piid (Signature above Printed Name) Faculty OJT Coordinator
Date: May 25 , 2012 Date: ________________ , 2012
77 | P a g e
COLLEGE OF ARCHITECTURE AND FINE ARTS
DEPARTMENT OF INTERIOR DESIGN PUP Engineering and Architecture BuildingNDC Compound,
Anonas cor. Pureza Sts., Sta. Mesa, Manila Tel: (632) 713 9304
BS INTERIOR DESIGN OJT REPORT
Daily Log of Training Experience
Date: May 25 , 2012
Name of Student: Sestoso Adan Raymond Deguitos Family Name First Name Middle Name
Office/Company Name: ACMI/ WORKPLACE DESIGN CENTER
Address: 464 Audrich Building Lt. Artiaga St. San Juan City
Project Title: GLC Project Project Description:
Project Location:
Assigned Work Task: AutoCADD Office Site Others, pls. specify
Time In : 08:02 a.m.
Time Out : 06:19 p.m. Total No. of Hour/s Spent: 8 hrs.
Weather Condition: Sunny Site Condition:
Work Activities Performed:
Plan/ Top of Reception counter that I made & render it on Sketch UP
Personal Observations at the Project Site:
78 | P a g e
Report/s Submitted, if any:
Lesson/s Learned:
- I learned how to render an object/ component in sketch up & to how to create lighting shadow.
- I also learned how to input quotation letter/ note in Microsoft Excel.
Picture/s Taken, if any:
Certified True and Correct by: Noted by:l
Mentor IDr. Billie Jean Dumlao-Dela Cruz, piid (Signature above Printed Name) Faculty OJT Coordinator
Date: May 25 , 2012 Date: ________________ , 2012
79 | P a g e
80 | P a g e
POLYTECHNIC UNIVERSITY OF THE PHILIPPINES
COLLEGE OF ARCHITECTURE AND FINE ARTS
DEPARTMENT OF INTERIOR DESIGN PUP Engineering and Architecture BuildingNDC Compound,
Anonas cor. Pureza Sts., Sta. Mesa, Manila Tel: (632) 713 9304
BS Interior Design On-the-Job Training ON-THE-JOB TRAINING WEEKLY ACCOMPLISHMENT REPORT
Name of Student: Sestoso, Adan Raymond Deguitos Family Name, First Name Middle Name
Student No.2009-04089-MN-0 Employed by: ACMI
Address:464 Lt. Artiga St. San Juan
Reporting Period from: 17th May 2012___ to 25th May 2012__ Day Month Day Month
Item No.
Project Title/Description/Location Field of Practice
(Brief Description) No. of Hours
Percentage of
Assigned Work
Completed
100% = Full Completion
1 • AutoCAD – Perspective of
coffee/ center table & display cabinet
AAW Inc.
AutoCAD – Furniture 4hrs 95%
2 • Sketch Up – Perspective and Dimension of Hanging cabinet, Executive table, Side table, Office tables, Conference table and freestanding tables.
Sketch up - Furniture 8hrs 100%
3 • Sketch Up – Make a proposed counter @ Information Area
Sketch up - Furniture 6hrs 100%
4 • AutoCAdd – Make a proposed furniture layout ( 2D drafting & annotation)
GLC Project
AutoCAD-Furniture layout
8hrs 97%
5 • AutoCAdd – Design/ make 3D model of a proposed reception counter
2 Proposed Reception Counter
Furniture 8hrs 100%
81 | P a g e
Recommendations for the Trainee’s further growth and development:
Checked and Approved by: Conforme:
SESTOSO, ADAN RAYMOND D.
OJT Faculty Coordinator Student Trainee (Signature above printed name) (Signature above printed name)
82 | P a g e
83 | P a g e
EVALUATION FORM – ACMI WORKPLACE DESIGN CENTER