FILTER DRIERS -...

651

FILTER DRIERS

TOTALINE® LIQUID LINE FILTER DRIERS P502-8 SERIES

FEATURES

• Compacted bead filter drier

• Universal Replacement CFC, HCFC, HFC refrigerants

• Filtration first for more effective use of surface area of desiccant

• Solid copper fittings for easy installation

• Desiccant blend - 75% molecular sieve and 25% activated alumina

• High moisture and acid capacity

SPECIFICATIONS:

Filtration: 20 microns

Maximum working pressure: Sizes03-16 600 psig30-75 500 psig

502-8 LIQUID LINE FILTER DRIERS

TYPE OF CONNECTIONS = SOLDERMF = MALE x FEMALE FLAREFM = FEMALE x MALE FLARENO LETTER = MALE x MALE FLARE

PART NUMBER SIGNIFICANCE

P

CUBIC INCHESOF DESICCANT

FITTING SIZE IN EIGHTHS OF AN INCH

P353

TOTALINE LIQUID LINE FILTER DRIER PHYSICAL DATA

PART NO.DIMENSIONS RCD

PART NO.DIMENSIONS

A B C D E A B C D EP502-8032 4-3/8 — — P502-8165S 6-3/8 5-1/8 5/8 4-9/16 2-29/32P502-8032S 3-7/8 3-1/8 3/8 2-9/16 1-5/8 P502-8167S 6-15/16 5-7/16 3/4P502-8033 4-11/16 — — P502-8303 9-5/8 — —P502-8033S 4-1/16 3-3/16 7/16 P502-8303S 9 8-1/8 7/16P502-8052 4-3/4 — — P502-8304 9-27/32 — —P502-8052S 4-1/4 3-1/2 3/8 2-15/16 2-5/16 P502-8304S 9-3/32 8-3/32 1/2P502-8053 5-1/16 — — P502-8305 10-5/16 — — 7-1/2 3-1/32P502-8053S 4-7/16 3-9/16 7/16 P502-8305S 9-9/32 8-1/32 5/8P502-8082 5-11/16 — — P502-8306S 9-5/8 8-3/8 5/8P502-8082S 5-3/16 4-7/16 3/8 P502-8307S 9-27/32 8-11/32 3/4P502-8083 6 — — 3-7/8 2-5/16 P502-8309S 10-3/16 8-3/8 29/32P502-8083S 5-3/8 4-1/2 7/16 P502-8413 9-3/4 — —P502-8084 6-7/32 — — P502-8414 9-31/32 — —P502-8084S 5-15/32 4-15/32 1/2 P502-8414S 9-7/32 8-7/32 1/2P502-8162 6-3/8 — — P502-8415 10-7/16 — — 7-5/8 3-17/32P502-8162S 5-7/8 5-1/8 3/8 P502-8415S 9-13/32 8-5/32 5/8P502-8163 6-11/16 — — 4-9/16 2-29/32 P502-8417S 9-31/32 8-15/32 3/4P502-8163S 6-1/8 5-7/32 7/16 P502-8419S 10-5/16 8-1/2 29/32P502-8164 6-29/32 — — P502-8757S 15-13/32 13-29/32 3/4P502-8164S 6-3/16 5-3/16 1/2 P502-8759S 15-3/4 13-15/16 29/32 13/16 3-17/32P502-8165 7-3/8 — —

P353A

652

FILTER DRIERS

TOTALINE® LIQUID LINE FILTER DRIERS, CAPACITY TABLE P502-8 SERIES

TOTALINE® LIQUID LINE FILTER DRIERS

*All ratings in accordance with ARI Standard 710-86. 86° F Liquid Refrigerant Temperature, 5° F Saturated Vapor Temperature, 3.1 lbs/min/ton for R-134a,2.9 lbs/min/ton for R-22, 4.0 lbs/min/ton for R-404A/R0507.

†Water Capacities are based on: Equilibrium Point Dryness of 50 Parts Per Million for R-134a, Equilibrium Point Dryness of 60 Parts Per Million for R-22,Equilibrium Point Dryness of 50 Parts Per Million for R-404A/R-507.

**20 drops of water =1 gram = 1cc.

PART NO.CONNECTIONSIZE & TYPE

FLOW CAPACITY* (Tons) @ 1 PSI ∆∆∆∆PWATER CAPACITY† (Drops of Water)**

RefrigerantR-134a R-22 R-404A/R507 R-410A

R-134a R-22R-404A/R-507

R-410ALiquid Line Temperature (F)

75 125 75 125 75 125 75 125P502-8032 1/4 SAE 2.0 2.2 1.5 2.2

40 37 40 33 38 37 21 19P502-8032S 1/4ODF-3/8 ODM 2.7 2.9 1.9 2.9P502-8033 3/8 SAE 3.0 3.2 2.1 3.2P502-8033S 3/8 ODF-1/2 ODM 3.0 3.3 2.2 3.3P502-8052 1/4 SAE 2.1 2.3 1.5 2.3

116 106 114 97 109 106 64 58P502-8052S 1/4 ODF 3.3 3.6 2.4 3.6P502-8053 3/8 SAE 3.5 3.8 2.5 3.8P502-8053S 3/8 ODF 4.4 4.8 3.2 4.9P502-8082 1/4 SAE 2.3 2.5 1.7 2.5

237 218 235 200 224 212 159 118

P502-8082S 1/4 ODF 3.1 3.4 2.3 3.4P502-8083 3/8 ODF 4.0 4.3 2.9 4.4P502-8083S 3/8 ODF 4.5 4.9 3.3 5.0P502-8084 1/2 SAE 6.7 7.3 4.9 7.4P502-8084S 1/2 ODF 7.1 7.7 5.2 7.8P502-8162 1/4 SAE 2.3 2.4 1.6 2.5

371 341 368 313 350 340 206 186

P502-8162S 1/4 ODF 3.1 3.4 2.3 3.5P502-8163 3/8 SAE 3.9 4.3 2.9 4.3P502-8163S 3/8 ODF 4.4 4.8 3.2 4.9P502-8164 1/2 SAE 7.2 7.8 5.2 7.9P502-8164S 1/2 ODF 8.5 9.2 6.2 9.3P502-8165 5/8 SAE 9.7 10.5 7.0 10.6P502-8165S 5/8 ODF 10.1 10.9 7.3 11.0P502-8167S 7/8 ODF 15.5 16.8 11.2 17.0P502-8303 3/8 SAE 4.3 4.7 3.1

664 611 657 561 627 608 — —

P502-8303S 3/8 ODF 6.3 6.8 4.5P502-8304 1/2 SAE 8.1 8.8 5.9P502-8304S 1/2 ODF 10.0 10.8 7.2P502-8305 5/8 SAE 10.6 11.5 7.7P502-8305S 5/8 ODF 12.5 13.5 9.0P502-8306S 3/4 ODF 14.8 16.0 10.7P502-8307S 7/8 ODF 16.8 18.2 12.2P502-8309S 1-1/8 ODF 19.6 21.2 14.2P502-8413 3/8 SAE 4.3 4.7 3.1

938 854 919 785 876 850 — —

P502-8414 1/2 SAE 10.4 11.3 7.5P502-8414S 1/2 ODF 10.8 11.7 7.8P502-8415 5/8 SAE 12.0 13.0 8.7P502-8415S 5/8 ODF 17.0 18.4 12.3P502-8417S 7/8 ODF 20.3 22.0 14.7P502-8419S 1-1/8 ODF 27.7 30.0 20.1P502-8757S 7/8 ODF 22.2 24.0 16.1

1485 1361 1468 1247 1406 1354 — —P502-8759S 1-1/8 ODF 32.7 35.4 23.7

UNITSIZE

LIQUID REFRIGERANT CAPACITY BY WEIGHT-OUNCESR-134a R-22 R-404A/R-507 R-410A

Liquid Temperature Liquid Temperature Liquid Temperature LIQUID TEMPERATURE75° F 125° F 75° F 125° F 75° F 125° F 75° F 125° F

3 2.7 2.4 2.6 2.3 2.3 2.0 2.3 1.95 6.0 5.4 5.9 5.3 5.2 4.5 5.3 4.48 7.6 6.9 7.5 6.8 6.6 5.7 — —

16 9.4 8.5 9.3 8.4 8.2 7.0 — —30 26.4 23.9 26.1 23.5 23.0 19.8 — —41 36.8 33.2 36.4 32.5 32.0 27.6 — —75 66.5 58.0 65.8 59.2 58.0 50.0 — —

653

FILTER DRIERS

ALCO EK EXTRA-KLEAN LIQUID LINE FILTER DRIERThe EK has been upgraded to include the same features as the EKP with 20 micron final filtration and added water capacity!

SPECIFICATIONS• Desiccant blend — 75% molecular sieve and 25% activated alumina• Filtration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 microns• Maximum Working Pressure:. . . . . . . . . . Sizes: 03-16 600 psig

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30-75 500 psig• UL File Number: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SA 3124• CSA File Number: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .LR100624

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .LR32462

NOMENCLATURE

Example: EK-083S

EK 08 3 SDrier

SeriesUnit Size(in cu. in.)

Connection Size (in 1/8″)

S = ODF Connections

(omit for SAE)

P973

CAPACITY TABLE

P/N CONNECTIONS

FLOW CAPACITY TONS @ 1 psi ∆∆∆∆P(For kW, multiply tons by 3.5)

WATER CAPACITY DROPS OF WATERR-12 R-134a R-22 R-407C R-410A R-404A/507 R-502

R-12 R-134aR-22/

R-410A R-407CR-404A/

507 R-502 75° F 125° F 75° F 125° F 75° F 125° F 75° F 125° F 75° F 125° F 75° F 125° F 75° F 125° F

EK 03 2 FM 1/4 Fem/In SAE 1.6 2.0 2.2 2.1 1.4 1.4

47 41 40 37 40 33 33 25 21 19 38 37 42 37

EK 03 2 MF 1/4 Male/In SAE 1.6 2.0 2.2 2.1 1.4 1.4EK 03 2 1/4 SAE 1.6 2.0 2.2 2.1 1.4 1.4EK 03 2 S 1/4 ODF 2.2 2.7 2.9 2.9 2.0 1.9EK 03 2 SV 1/4 ODF 2.2 2.7 2.9 2.9 2.0 1.9EK 03 3 3/8 SAE 2.5 3.0 3.3 3.2 2.2 2.1EK 03 3 S 3/8 ODF 2.5 3.0 3.3 3.2 2.2 2.1EK 05 2 FM 1/4 Fem/In SAE 1.7 2.1 2.3 2.2 1.5 1.5

133 119 116 106 114 97 95 75 64 58 109 106 120 107

EK 05 2 MF 1/4 Male/In ODF 1.7 2.1 2.3 2.2 1.5 1.5EK 05 2 1/4 SAE 1.7 2.1 2.3 2.2 1.5 1.5EK 05 2 S 1/4 ODF 2.7 3.3 3.6 3.5 2.4 2.3EK 05 3 MF 3/8 Male/In ODF 2.9 3.5 3.8 3.7 2.5 2.5EK 05 3 3/8 SAE 2.9 3.5 3.8 3.7 2.5 2.5EK 05 3 S 3/8 ODF 3.6 4.4 4.8 4.7 3.2 3.1EK 08 2 FM 1/4 Fem/In SAE 1.9 2.3 2.5 2.4 1.7 1.6

274 240 237 218 235 200 195 155 159 118 224 217 245 217

EK 08 2 MF 1/4 Male/In ODF 1.9 2.3 2.5 2.4 1.7 1.6EK 08 2 1/4 SAE 1.9 2.3 2.5 2.4 1.7 1.6EK 08 2 S 1/4 ODF 2.5 3.1 3.4 3.3 2.2 2.2EK 08 25 S 5/16 ODF 2.9 3.5 3.8 3.7 2.5 2.5EK 08 3 MF 3/8 Male/In ODF 3.3 4.0 4.3 4.3 2.9 2.8EK 08 3 3/8 SAE 3.3 4.0 4.3 4.3 2.9 2.8EK 08 3 S 3/8 ODF 3.7 4.5 4.9 4.8 3.3 3.2EK 08 4 1/2 SAE 5.5 6.7 7.3 7.1 4.9 4.7EK 08 4 S 1/2 ODF 5.8 7.1 7.7 7.5 5.1 5.0EK 16 2 MF 1/4 Male/In ODF 1.9 2.3 2.5 2.4 1.7 1.6

347 301 371 341 368 313 305 240 206 186 350 340 306 272

EK16 2 1/4 SAE 1.9 2.3 2.5 2.4 1.7 1.6EK16 2 S 1/4 ODF 2.5 3.1 3.4 3.3 2.2 2.2EK 16 25 S 5/16 ODF 2.5 3.1 3.4 3.3 2.2 2.2EK 16 3 3/8 SAE 3.2 3.9 4.2 4.1 2.8 2.7EK 16 3 S 3/8 ODF 3.6 4.4 4.8 4.7 3.2 3.1EK 16 4 1/2 SAE 5.9 7.2 7.8 7.7 5.2 5.1EK 16 4 S 1/2 ODF 7.0 8.5 9.2 9.0 6.2 6.0EK 16 5 5/8 SAE 8.0 9.7 10.5 10.3 7.0 6.8EK 16 5 S 5/8 ODF 8.3 10.1 10.9 10.7 7.3 7.1EK 16 7 S 7/8 ODF 12.7 15.5 16.8 16.5 11.2 10.9EK 30 3 3/8 SAE 3.5 4.3 4.7 4.6 3.1 3.0

601 526 664 611 657 561 548 434 — — 627 608 536 477

EK 30 3 S 3/8 ODF 5.2 6.3 6.8 6.7 4.6 4.4EK 30 4 1/2 SAE 6.6 8.1 8.8 8.6 5.9 5.7EK 30 4 S 1/2 ODF 8.2 10.0 10.8 10.6 7.2 7.0EK 30 5 5/8 SAE 8.7 10.6 11.5 11.3 7.7 7.5EK 30 5 S 5/8 ODF 10.3 12.5 13.5 13.3 9.1 8.8EK 30 6 S 3/4 ODF 12.1 14.8 16.0 15.7 10.7 10.4EK 30 7 S 7/8 ODF 13.8 16.8 18.2 17.9 12.2 11.8EK 30 9 S 1-1/8 ODF 16.1 19.6 21.2 20.8 14.2 13.8EK 41 3 3/8 SAE 3.5 4.3 4.7 4.6 3.1 3.0

1104 971 938 854 919 785 765 607 — — 876 850 991 884

EK 41 4 1/2 SAE 8.5 10.4 11.3 11.1 7.5 7.3EK 41 4 S 1/2 ODF 8.9 10.8 11.7 11.5 7.8 7.6EK 41 5 5/8 SAE 9.8 12.0 13.0 12.8 8.7 8.5EK 41 5 S 5/8 ODF 13.9 17.0 18.4 18.1 12.3 12.0EK 41 7 S 7/8 ODF 16.6 20.3 22.0 21.6 14.7 14.3EK 41 9 S 1-1/8 ODF 22.7 27.7 30.0 29.4 20.1 19.5EK 75 7 S 7/8 ODF 18.2 22.2 24.1 23.6 16.1 15.6

2196 1932 1485 1361 1468 1247 1220 961 — — 1406 1354 1971 1760EK 75 9 S 1-1/8 ODF 26.8 32.7 35.4 34.8 23.7 23.0

654

FILTER DRIERS

ALCO ADK BLOCK STYLE LIQUID LINE FILTER DRIERS

P974

SPECIFICATIONS• Desiccant Blend: Activated Alumina with Molecular Sieve• Filtration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 microns• Maximum Working Pressure:. . . . . Sizes: 03-16 600 psig

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30-75 500 psig• UL File Number: . . . . . . . . . . . . . . . . . . . . . . . . . . . SA 3124• CSA File Number: . . . . . . . . . . . . . . . . . . . . . . . . .LR100624

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .LR32462

NOMENCLATURE

Example: ADK 083S

ADK 08 3 SSeries Unit Size

(in cu. in.)Connection

Size (in 1/8″)S = ODF

Connections (omit for SAE)

CAPACITY TABLE

P/N CONNECTIONS



R-12 R-134a R-22 R-410A R-407CR-404A/


ADK 03 2 1/4 SAE 1.6 1.9 2.1 2.1 2.0 1.4 1.3

64 46 44 37 34 31 31 21 27 17 47 37 43 34ADK 03 2 S 1/4 ODF 1.9 2.3 2.5 2.5 2.4 1.7 1.6ADK 03 3 3/8 SAE 2.2 2.7 2.9 2.9 2.9 2.0 1.9

ADK 03 3 S 3/8 ODF 2.5 3.0 3.3 3.3 3.2 2.2 2.1ADK 05 2 1/4 SAE 1.6 2.0 2.2 2.2 2.1 1.4 1.4

130 81 68 50 58 38 47 26 44 23 73 48 73 49ADK 05 2 S 1/4 ODF 2.4 2.9 3.1 3.1 3.1 2.1 2.0ADK 05 3 3/8 SAE 3.0 3.7 4.0 4.0 3.9 2.7 2.6

ADK 05 3 S 3/8 ODF 3.7 4.5 4.9 4.9 4.8 3.3 3.2ADK 08 2 1/4 SAE 1.6 2.0 2.2 2.2 2.1 1.4 1.4

188 117 101 76 87 57 68 39 63 34 109 73 105 71

ADK 08 2 S 1/4 ODF 2.5 3.1 3.4 3.4 3.3 2.2 2.2

ADK 08 3 3/8 SAE 3.5 4.3 4.7 4.7 4.6 3.1 3.0ADK 08 3 S 3/8 ODF 3.4 4.2 4.6 4.6 4.5 3.0 3.0ADK 08 4 1/2 SAE 5.5 6.7 7.3 7.3 7.1 4.9 4.7

ADK 08 4 S 1/2 ODF 5.7 7.0 7.6 7.6 7.4 5.1 4.9ADK 16 2 1/4 SAE 1.6 2.0 2.2 2.2 2.1 1.4 1.4

295 204 169 140 151 117 134 86 115 67 180 143 193 145

ADK 16 3 1/4 SAE 3.6 4.4 4.8 4.8 4.7 3.2 3.1ADK 16 3 S 1/4 ODF 4.0 4.9 5.3 5.3 5.2 3.6 3.5

ADK 16 4 1/2 SAE 6.8 8.3 9.0 9.0 8.8 6.0 5.8ADK 16 4 S 1/2 ODF 7.1 8.6 9.3 9.3 9.1 6.2 6.1ADK 16 5 5/8 SAE 9.7 11.8 12.8 12.8 12.5 8.6 8.3

ADK 16 5 S 5/8 ODF 10.7 13.1 14.2 14.2 13.9 9.5 9.2ADK 16 7 S 7/8 ODF 13.1 16.0 17.3 17.3 17.0 11.6 11.3ADK 30 3 3/8 SAE 3.9 4.7 5.1 — 5.0 3.4 3.3

615 444 359 278 314 218 309 212 — — 385 272 427 335

ADK 30 4 1/2 SAE 7.1 8.6 9.3 — 9.1 6.2 6.1

ADK 30 4 S 1/2 ODF 7.2 8.8 9.5 — 9.4 6.4 6.2ADK 30 5 5/8 SAE 11.3 13.8 15.0 — 14.7 10.0 9.7ADK 30 5 S 5/8 ODF 11.9 14.5 15.7 — 15.4 10.5 10.2

ADK 30 6 S 3/4 ODF 13.0 15.8 17.1 — 16.8 11.5 11.1ADK 30 7 S 7/8 ODF 14.3 17.4 18.9 — 18.5 12.6 12.3ADK 30 9 S 1-1/8 ODF 20.4 24.9 27.0 — 26.5 18.0 17.5

ADK 41 3 3/8 SAE 3.9 4.7 5.1 — 5.0 3.4 3.3

728 480 502 391 440 309 302 186 — — 537 387 445 322

ADK 41 4 1/2 SAE 8.0 9.8 10.6 — 10.4 7.1 6.9ADK 41 4 S 1/2 ODF 8.8 10.7 11.6 — 11.4 7.8 7.5ADK 41 5 5/8 SAE 12.8 15.6 16.9 — 16.6 11.3 11.0

ADK 41 5 S 5/8 ODF 13.5 16.5 17.9 — 17.5 12.0 11.6ADK 41 7 S 7/8 ODF 16.6 20.3 22.0 — 21.6 14.7 14.3ADK 41 9 S 1-1/8 ODF 20.7 25.2 27.3 — 26.8 18.3 17.7

ADK 75 7 S 7/8 ODF 28.0 34.2 37.1 — 36.3 24.8 24.11369 899 940 730 823 576 562 343 — — 1008 719 833 600

ADK 75 9 S 1-1/8 ODF 30.6 37.3 40.4 — 39.6 27.0 26.3

655

FILTER DRIERS

ALCO BOK-HH LIQUID LINE BURNOUT FILTER DRIERSAPPLICATION• Alco’s BOK-HH incorporates an HH blended solid core for

the effective clean-up of systems following a severe burnout.• Liquid line filter drier for burnout clean-up and wax removal.

SPECIFICATIONS• Filtration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 microns• Maximum Working Pressure: . . . . .Sizes: 08-16 600 psig

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30-41 500 psig• UL File Number: . . . . . . . . . . . . . . . . . . . . . . . . . . . . SA 3124• CSA File Number: . . . . . . . . . . . . . . . . . . . . . . . . LR100624

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LR32462

NOMENCLATURE

BOK 30 5 S HHSeries Unit Size

(in cu. in.)Connection

Size (in 1/8″)S = ODF

Connection (omit for

SAE)

CharcoalBlend

Above example: BOK 305S-HH

P981

BOK-HH CAPACITY TABLES

P/N CONNECTIONS



R-12 R-134a R-22 R-410A R-407CR-404A/


BOK 08 2-HH 1/4 SAE 1.2 1.5 1.6 1.6 1.6 1.1 1.0180 118 88 71 78 59 74 45 66 38 98 71 109 79

BOK 08 3-HH 3/8 SAE 3.2 3.9 4.2 4.2 4.1 2.8 2.7BOK 16 2-HH 1/4 SAE 1.2 1.5 1.6 1.6 1.6 1.1 1.0

209 143 171 141 153 117 91 56 77 41 182 141 135 100

BOK 16 3-HH 3/8 SAE 3.6 4.3 4.7 4.7 4.6 3.1 3.1BOK 16 3 S-HH 3/8 ODF 4.8 5.8 6.3 6.3 6.2 4.2 4.1BOK 16 4-HH 1/4 SAE 7.0 8.6 9.3 9.3 9.1 6.2 6.0

BOK 16 4 S-HH 1/4 ODF 8.4 10.2 11.1 11.1 10.9 7.4 7.2BOK 16 5-HH 5/8 SAE 10.5 12.8 13.9 13.9 13.6 9.3 9.0BOK 16 5 S-HH 5/8 ODF 10.5 12.8 13.9 13.9 13.6 9.3 9.0BOK 30 3-HH 3/8 SAE 3.6 4.3 4.7 — 4.6 3.1 3.1

552 367 300 245 267 204 234 146 — — 318 247 342 249BOK 30 4-HH 1/2 SAE 8.1 9.9 10.7 — 10.5 7.2 7.0BOK 30 4 S-HH 1/2 ODF 8.9 10.8 11.7 — 11.5 7.8 7.6BOK 30 5-HH 5/8 SAE 11.1 13.5 14.6 — 14.3 9.8 9.5

BOK 30 5 S-HH 5/8 ODF 12.0 14.6 15.8 — 15.5 10.6 10.3BOK 41 4-HH 1/4 SAE 8.4 10.2 11.1 — 10.9 7.4 7.2

623 410 427 344 379 282 256 155 — — 454 342 380 274BOK 41 5-HH 5/8 SAE 13.4 16.3 17.7 — 17.4 11.8 11.5BOK 41 7 S-HH 7/8 ODF 16.3 19.8 21.5 — 21.1 14.4 14.0

656

FILTER DRIERS

ALCO UDK ULTRA-DRY KLEANER LIQUID LINE FILTER DRIERFEATURES• Solid copper connections.• Ultra high moisture capacity.• Meets or exceeds all compressor manufacturer desiccant

standards.• Corrosion resistant epoxy powder paint finish.

SPECIFICATIONS• Desiccant blend — 75% molecular sieve and 25% activated

alumina.• Filtration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 microns• Maximum Working Pressure: . . . . .Sizes: 03-16 600 psig

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30-75 500 psig• UL File Number: . . . . . . . . . . . . . . . . . . . . . . . . . . . . SA 3124• CSA File Number: . . . . . . . . . . . . . . . . . . . . . . . . LR100624

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LR32462

NOMENCLATURE

UDK 08 3 SSeries Unit Size

(in cu. in.)Connection Size

(in 1/8″)S = ODF

Connection (omit for SAE)

Above example: UDK 083S

UDK CAPACITY TABLES

P/N CONNECTIONS



R-12 R-134a R-22 R-410A R-407CR-404A/


UK 03 2 1/4 SAE 1.6 1.9 2.1 2.1 2.0 1.4 1.3

80 69 73 67 68 62 56 43 36 32 75 71 71 62UK 03 2S 1/4 ODF 1.9 2.3 2.5 2.5 2.4 1.7 1.6UK 03 3 3/8 SAE 2.2 2.7 2.9 2.9 2.9 2.0 1.9

UK 03 3 S 3/8 ODF 2.5 3.0 3.3 3.3 3.2 2.2 2.1UK 05 2 1/4 SAE 1.6 2.0 2.2 2.2 2.1 1.4 1.4

253 221 205 189 191 173 168 131 112 100 212 200 225 200UK 05 2 S 1/4 ODF 2.4 2.9 3.1 3.1 3.1 2.1 2.0UK 05 3 3/8 SAE 3.0 3.7 4.0 4.0 3.9 2.7 2.6

UK 05 3 S 3/8 ODF 3.7 4.5 4.9 4.9 4.8 3.3 3.2UK 08 2 1/4 SAE 1.6 2.0 2.2 2.2 2.1 1.4 1.4

366 320 305 281 284 258 241 187 160 143 316 298 327 290

UK 08 2 S 1/4 ODF 2.5 3.1 3.4 3.4 3.3 2.2 2.2

UK 08 3 3/8 SAE 3.5 4.3 4.7 4.7 4.6 3.1 3.0UK 08 3 S 3/8 ODF 3.4 4.2 4.6 4.6 4.5 3.0 3.0UK 08 4 1/2 SAE 5.5 6.7 7.3 7.3 7.1 4.9 4.7

UK 08 4 S 1/2 ODF 5.7 7.0 7.6 7.6 7.4 5.1 4.9UK 16 2 1/4 SAE 1.6 2.0 2.2 2.2 2.1 1.4 1.4

483 427 432 396 401 363 306 233 197 174 450 422 436 390

UK 16 3 1/4 SAE 3.6 4.4 4.8 4.8 4.7 3.2 3.1UK 16 3 S 1/4 ODF 4.0 4.9 5.3 5.3 5.2 3.6 3.5

UK 16 4 1/2 SAE 6.8 8.3 9.0 9.0 8.8 6.0 5.8UK 16 4 S 1/2 ODF 7.1 8.6 9.3 9.3 9.1 6.2 6.1UK 16 5 5/8 SAE 9.7 11.8 12.8 12.8 12.5 8.6 8.3

UK 16 5 S 5/8 ODF 10.7 13.1 14.2 14.2 13.9 9.5 9.2UK 16 7 S 7/8 ODF 13.1 16.0 17.3 17.3 17.0 11.6 11.3UK 30 3 3/8 SAE 3.9 4.7 5.1 — 5.0 3.4 3.3

996 864 860 809 818 744 673 522 — — 912 859 882 778

UK 30 4 1/2 SAE 7.1 8.6 9.3 — 9.1 6.2 6.1

UK 30 4 S 1/2 ODF 7.2 8.8 9.5 — 9.4 6.4 6.2UK 30 5 5/8 SAE 11.3 13.8 15.0 — 14.7 10.0 9.7UK 30 5 S 5/8 ODF 11.9 14.5 15.7 — 15.4 10.5 10.2

UK 30 6 S 3/4 ODF 13.0 15.8 17.1 — 16.8 11.5 11.1UK 30 7 S 7/8 ODF 14.3 17.4 18.9 — 18.5 12.6 12.3UK 30 9 S 1-1/8 ODF 20.4 24.9 27.0 — 26.5 18.0 17.5

UK 41 3 3/8 SAE 3.9 4.7 5.1 — 5.0 3.4 3.3

1322 1146 1205 1108 1120 1018 921 714 — — 1249 1176 1170 1030

UK 41 4 1/2 SAE 8.0 9.8 10.6 — 10.4 7.1 6.9UK 41 4 S 1/2 ODF 8.8 10.7 11.6 — 11.4 7.8 7.5UK 41 5 5/8 SAE 12.8 15.6 16.9 — 16.6 11.3 11.0

UK 41 5 S 5/8 ODF 13.5 16.5 17.9 — 17.5 12.0 11.6UK 41 7 S 7/8 ODF 16.6 20.3 22.0 — 21.6 14.7 14.3UK 41 9 S 1-1/8 ODF 20.7 25.2 27.3 — 26.8 18.3 17.7

UK 75 7 S 7/8 ODF 28.0 34.2 37.1 — 36.3 24.8 24.12505 2169 2281 2097 2120 1926 1741 1347 — — 2366 2227 2216 1949

UK 75 9 S 1-1/8 ODF 30.6 37.3 40.4 — 39.6 27.0 26.3

P4398

657

FILTER DRIERS

ALCO ALF LIQUID FILTER DRIER

P4402

APPLICATION• Liquid line filter.• Recovery, recycle and reclaim filter.

SPECIFICATIONS• Filtration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 microns• Maximum Working Pressure: . . . . . . . . . . . . . . . . . . 500 psig• UL File Number:. . . . . . . . . . . . . . . . . . . . . . . . . . . . SA 3124• CSA File Number: . . . . . . . . . . . . . . . . . . . . . . . . LR100624

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LR32462

NOMENCLATURE

Example: ALF 033S

DIMENSIONAL DATA

ALF 03 3 SSeries Unit

SizeConnection

SizeInlet: (in 1/8″)

S = ODFConnection Style

Omit for SAE (Male In-Male Out)MF = Male SAE In - Female SAE OutFM = Female SAE In - Male SAE Out

RECOVERY, RECYCLE AND RECLAIMREFRIGERANT FLOW CAPACITY

(lb/min. liquid)R-134a R-22 R-404A/R-507

7.6 8.0 8.0

P4402A

ALF-032-MF Pictured

SELECTION AND ORDERING INFORMATION FOR ALF

*Does not include weld bead.

P/NDIMENSIONS

ConnectionSize A B* C

ALF-032 1/4 SAE 2-9/16 1-5/8 4-3/8ALF-032S 1/4 ODF 2-9/16 1-5/8 3-7/8

ALF-032MF 1/4 SAE Male In1/4 SAE Female Out 2-9/16 1-5/8 4

ALF-032FM 1/4 SAE Female In1/4 SAE Male Out 2-9/16 1-5/8 4

ALF-033S 3/8 ODF 2-9/16 1-5/8 4ALF-034S 1/2 ODF 2-9/16 1-5/8 4-1/8ALF-052 1/4 SAE 3 2-5/8 4-7/8

ALF-052MF 1/4 SAE Male In1/4 SAE Female Out 3 2-5/8 4-3/8

658

FILTER DRIERS

ALCO BFK/EBF LIQUID LINE BI-DIRECTIONAL HEAT PUMP FILTER DRIERAPPLICATION• Bi-directional liquid line filter drier for heat pump applications.• For use with CFC, HCFC, HFC refrigerants.

SPECIFICATIONS• Desiccant blend — 75% molecular sieve and 25% activated

alumina (Bead)• Filtration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 microns• Maximum Working Pressure: . . . . .Sizes: 05-16 600 psig

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 500 psig• UL File Number: . . . . . . . . . . . . . . . . . . . . . . . . . . . . SA 3124• CSA File Number . . . . . . . . . . . . . . . . . . . . . . . . . LR100624

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LR32462

P988

BFK CAPACITY TABLE

EBF CAPACITY TABLE

P/N CONNECTIONSFLOW CAPACITY TONS @ 1 psi ∆∆∆∆P

(For kW, Multiply Tons By 3.5)WATER CAPACITY DROPS OF WATER

R-22 R-407C R-410AR-22 R-410A R-407C 75° F 125° F 75° F 125° F 75° F 125° F

BFK 05 2 1/4 SAE 1.6 1.6 1.6

73 66 58 42 39 35BFK 05 2 S 1/4 ODF 2.2 2.2 2.2BFK 05 3 3/8 SAE 3.0 3.0 2.9BFK 05 3 S 3/8 ODF 4.0 4.0 3.9BFK 08 3 3/8 SAE 4.5 4.5 4.4

159 144 106 79 85 75

BFK 08 3 S 3/8 ODF 5.1 5.1 5.0BFK 08 4 1/2 SAE 6.4 6.4 6.3BFK 08 4 S 1/2 ODF 6.7 6.7 6.6BFK 08 5 5/8 SAE 7.8 7.8 7.7BFK 08 5 S 5/8 ODF 8.1 8.1 7.9BFK 16 3 3/8 SAE 4.6 4.6 4.5

323 294 237 179 178 160

BFK 16 3 S 3/8 ODF 5.2 5.2 5.1BFK 16 4 1/2 SAE 7.7 7.7 7.6BFK 16 4 S 1/2 ODF 8.1 8.1 7.9BFK 16 5 5/8 SAE 8.3 8.3 8.1BFK 16 5 S 5/8 ODF 8.7 8.7 8.5BFK 30 3 3/8 SAE 4.6 — 4.5

585 532 452 345 — —

BFK 30 3 S 3/8 ODF 5.8 — 5.7BFK 30 4 1/2 SAE 7.6 — 7.5BFK 30 4 S 1/2 ODF 9.7 — 9.5BFK 30 5 5/8 SAE 10.3 — 10.1BFK 30 5 S 5/8 ODF 14.2 — 13.9BFK 30 6 S 3/4 ODF 16.0 — 15.7BFK 30 7 S 7/8 ODF 16.7 — 16.4

P/NFLOW CAPACITY —

TONS @ 1 PSID

LIQUID REFRIGERANT HOLDING CAPACITY— oz

WATER HOLDING CAPACITYDROPS

R-22 R-407C R-410A R-22 R-407C R-410AR-22/R-410A R-407C 75° F 125° F 75° F 125° F 75° F 125° F 75° F 125° F 75° F 125° F 75° F 125° F

EBF163S 5.2 5.1

10.1 9.1 9.6 8.5 9.0 7.6 161 141 125 87 91 55EBF164 6.6 6.5EBF164S 7.4 7.3EBF165 8.0 7.8EBF165S 8.3 8.1

NOMENCLATURE

Example: BFK 165S

BFK 16 5 SSeries Unit Size

(in cu. in.)Connection Size

(in 1/8″)S = ODF

Connection (omit for SAE)

659

FILTER DRIERS

TOTALINE® LIQUID LINE BURNOUT FILTER DRIERS — P508 SERIES

APPLICATIONThe P508 series liquid line filter drier was designed for maximum effectiveness in the cleanup of systems following a severe burnout where a maximum capacity for water and acids is essential.

This series utilizes a molded block of acti-vated alumina, molecular sieve, andactivated carbon. This blend of activated alumina and activated carbon will remove the acids and products of a compressor burnout.

SELECTION PROCEDUREThe P508 Series Burnout Drier should be sized to one size larger than the existing liquid line drier.

503-8 SUCTION LINE FILTER DRIERS507-8 SUCTION LINE FILTERS508-8 LIQUID LINE BURNOUT CLEANER

FILTER DRIERS

TYPE OF CONNECTIONS = SOLDERNO LETTER = MALE x MALE FLARE

(EXCEPT CORE SHELLS WHICH ARE SOLDER)

FEATURES• Corrosion Resistant Epoxy Powder Paint Finish• Rugged Steel Shell (Shock Resistant Construction)• Wax Control for Low Temperature Applications• Extra Moisture and Acid Removal Capacity

SPECIFICATIONS• Filtration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 microns• Maximum Working Pressure . . . . . . . . . 02-16 (600 psig)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30-41 (500 psig)


P



TOTALINE LIQUID LINE BURNOUT FILTER DRIER PHYSICAL DATA


P/NDIMENSIONS

ConnectionSize

A B D E F*Ship Wt

(Lbs)P508-8082 1/4 SAE 5-5/8 — —

3-15/16 2-15/16 1P508-8083 3/8 SAE 5-15/16 — —P508-8162 1/4 SAE 6-7/16 — —P508-8163 3/8 SAE 6-3/4 — —P508-8163S 3/8 ODF 6-1/8 5-1/4 7/16

4-5/8 2-7/8 2P508-8164 1/2 SAE 6-15/16 — —P508-8164S 1/2 ODF 6-3/16 5-3/16 1/2P508-8303 5/8 SAE 7-7/16 — —P508-8165S 5/8 ODF 6-3/8 5-1/8 5/8

7-1/2 3-1/16 3-3/4

P508-8303 3/8 SAE 9-5/8 — —P508-8304 1/2 SAE 9-7/8 — —P508-8304S 1/2 ODF 9-1/8 8-1/8 1/2P508-8305 5/8 SAE 10-5/16 — —P508-8305S 5/8 ODF 9-5/16 8-1/16 5/8P508-8414 1/2 SAE 10 — —P508-8415 5/8 SAE 9-1/4 8-1/4 1/2

7-5/8 3-11/16 4-3/4P508-8417S 7/8 ODF 10-7/16 — —

P365

DIMENSIONAL DATA

P365A

*Indicates lay-in length.

660

FILTER DRIERS

TOTALINE® LIQUID LINE BURNOUT FILTER DRIERS — P508 SERIESP508-8 SERIES CAPACITY TABLE

P/N CONNECTIONS



R-12 R-134a R-22 R-410A R-407C R-404A/507

R-502 75° F 125° F 75° F 125° F 75° F 125° F 75° F 125° F 75° F 125° F 75° F 125° F 75° F 125° F

P508-8082 1/4 SAE 1.2 1.5 1.6 1.6 1.6 1.1 1.0180 118 88 71 78 59 74 45 66 38 98 71 109 79

P508-8083 3/8 SAE 3.2 3.9 4.2 4.2 4.1 2.8 2.7P508-8162 1/4 SAE 1.2 1.5 1.6 1.6 1.6 1.1 1.0

209 143 171 141 153 117 91 56 77 41 182 141 135 100

P508-8163 3/8 SAE 3.6 4.3 4.7 4.7 4.6 3.1 3.1

P508-8163S 3/8 ODF 4.8 5.8 6.3 6.3 6.2 4.2 4.1P508-8164 1/2 SAE 7.0 8.6 9.3 9.3 9.1 6.2 6.0P508-8164S 1/2 ODF 8.4 10.2 11.1 11.1 10.9 7.4 7.2P508-8303 5/8 SAE 10.5 12.8 13.9 13.9 13.6 9.3 9.0

P508-8165S 5/8 ODF 10.5 12.8 13.9 13.9 13.6 9.3 9.0P508-8303 3/8 SAE 3.6 4.3 4.7 — 4.6 3.1 3.1

552 367 300 245 267 204 234 146 — — 318 247 342 249

P508-8304 1/2 SAE 8.1 9.9 10.7 — 10.5 7.2 7.0

P508-8304S 1/2 ODF 8.9 10.8 11.7 — 11.5 7.8 7.6P508-8305 5/8 SAE 11.1 13.5 14.6 — 14.3 9.8 9.5P508-8305S 5/8 ODF 12.0 14.6 15.8 — 15.5 10.6 10.3P508-8414 1/2 SAE 8.4 10.2 11.1 — 10.9 7.4 7.2

623 410 427 344 379 282 256 155 — — 454 342 380 274P508-8415 5/8 SAE 13.4 16.3 17.7 — 17.4 11.8 11.5P508-8417S 7/8 ODF 16.3 19.8 21.5 — 21.1 14.4 14.0

661

FILTER DRIERS

TOTALINE® STANDARD CAPACITY SUCTION LINE FILTER DRIERS— P503-C SERIES

APPLICATIONRemoves solid contaminants and harmful acids that are created during motor burnout. The suction line filter drier should be installed in remote systems with long refrigerant lines to remove contaminants.

P503 SUCTION LINE FILTER DRIERS

TYPE OF CONNECTIONS = SOLDERNO LETTER = MOLEX MALE FLARE

FEATURES• Dual Access Valve on Each End for

Accurate Pressure Drop Reading• For Use with HCFCs, CFCs• High Organic and Inorganic Acid Removal• Corrosion Resistant Paint• Unique Molded Desiccant Block

SPECIFICATIONS• Max Working Pressure = 500 psig


P

CUBIC INCHES OF DESICCANT


CONNECTIONS, DIMENSIONS, FLOW CAPACITIES* IN REFRIGERANT TONS AT SELECTED EVAPORATOR TEMPERATURES

*All ratings in accordance with ARI Standard 710-86.

P/N CONNECTIONS(Size and Type)

DIMENSIONS+40° F +20° F 0° F –20° F +40° F +20° F 0° F –20° F –40° F +20° F 0° F –20° F –40° F +20° F

R-134a R-22 R-502Pressure Drop In PSI

A B 2 1.5 1 0.5 3 2 1.5 1 0.5 3 2 1.5 1 0.5P503-C083 3/8 SAE 6.10 2.5 0.6 0.4 0.2 0.1 0.9 0.6 0.4 0.3 0.1 0.7 0.5 0.3 0.2 0.1P503-C083S 3/8 ODF 5.43 2.5 0.8 0.5 0.3 0.2 1.3 0.8 0.6 0.4 0.2 1.0 0.7 0.5 0.3 0.1P503-C084 1/2 SAE 6.34 2.5 1.4 0.9 0.6 0.3 2.2 1.4 1.0 0.6 0.3 1.8 1.1 0.8 0.5 0.3P503-C084S 1/2 ODF 5.48 2.5 1.7 1.2 0.7 0.4 2.7 1.8 1.2 0.8 0.4 2.2 1.4 1.0 0.6 0.3P503-C085 5/8 SAE 6.17 2.5 2.2 1.5 0.9 0.5 3.4 2.2 1.5 1.0 0.5 2.8 1.8 1.2 0.8 0.4P503-C085S 5/8 ODF 5.74 2.5 2.4 1.6 1.0 0.5 3.8 2.5 1.7 1.1 0.6 3.1 2.0 1.3 0.8 0.4P503-C164 1/2 SAE 7.13 2.5 1.5 1.0 0.6 0.3 2.3 1.5 1.0 0.7 0.4 1.9 1.2 0.8 0.5 0.3P503-C164S 1/2 ODF 6.27 2.5 1.7 1.2 0.7 0.4 2.7 1.8 1.2 0.8 0.4 2.2 1.4 1.0 0.6 0.3P503-C165 5/8 SAE 7.50 2.5 2.1 1.4 0.9 0.4 3.2 2.1 1.4 0.9 0.5 2.7 1.7 1.2 0.7 0.4P503-C165S 5/8 ODF 6.54 2.5 2.2 1.5 0.9 0.5 3.4 2.2 1.5 1.0 0.5 2.8 1.8 1.2 0.8 0.4P503-C166S 3/4 ODF 6.95 2.5 2.6 1.8 1.1 0.6 4.1 2.7 1.8 1.2 0.6 3.4 2.2 1.5 0.9 0.5P503-C167S 7/8 ODF 7.13 2.5 2.7 1.8 1.1 0.6 4.6 2.8 1.9 1.1 0.6 4.3 2.6 1.7 1.0 0.6P503-C305 5/8 SAE 10.18 3.0 3.0 2.0 1.2 0.6 4.7 3.1 2.1 1.3 0.7 3.8 2.5 1.7 1.0 0.5P503-C305S 5/8 ODF 9.21 3.0 2.8 1.8 1.1 0.6 4.3 2.8 1.9 1.2 0.6 3.6 2.3 1.5 1.0 0.5P503-C307S 7/8 ODF 9.80 3.0 3.8 2.5 1.6 0.8 5.9 3.9 2.6 1.7 0.9 4.9 3.1 2.1 1.3 0.7P503-C309S 1-1/8 ODF 9.80 3.0 3.9 2.6 1.6 0.8 6.1 4.0 2.7 1.7 0.9 5.0 3.2 2.2 1.3 0.7P503-C417S 7/8 ODF 9.92 3.5 4.8 3.2 2.0 1.0 7.6 4.9 3.4 2.1 1.1 6.2 4.0 2.7 1.7 0.9P503-C419S 1-1/8 ODF 9.92 3.5 5.4 3.6 2.2 1.2 8.5 5.5 3.8 2.4 1.3 6.9 4.5 3.0 1.9 1.0

P388B

P388X

C SOLID BLOCK DESICCANT CORE

662

FILTER DRIERS

TOTALINE® HIGH CAPACITY SUCTION LINE FILTER DRIERS — P503-8 SERIES

APPLICATION• Premium suction line filter drier for moisture, acid and contaminant removal.• For use with CFC, HCFC, and HFC refrigerants.• Totaline’s P503-8 Series is a high capacity suction line filter drier that

incorporates beaded desiccant plus a filter.

FEATURES• Dual Access Valves• Corrosion Resistant Paint Finish• High Filtration Capacity

SPECIFICATIONS• Filtration: 40 microns• Maximum Working Pressure: 500 PSIG

503-8 SUCTION LINE FILTER DRIERS

TYPE OF CONNECTIONS = SOLDERNO LETTER = MALE x MALE FLARE

PART NUMBER SIGNIFICANCEP



P356

DIMENSIONAL DATA TOTALINE SUCTION LINE FILTER DRIER PHYSICAL DATA

P/N CONNECTIONSIZE

DIMENSIONS SHIP WT(lbs)A B C D E

P503-8083S 3/8 ODF 5-19/32 4-23/32 7/164-1/8

3/11/16

2P503-8084S 1/2 ODF 5-11/16 4-11/16 1/2P503-8135 5/8 SAE 7-9/16 — —

4-3/4 2-1/2P503-8135S 5/8 ODF 6-17/32 5-9/32 5/8P503-8166S 3/4 ODF 7-3/4 6-1/2 5/8

5-9/16 3P503-8167S 7/8 ODF 7-15/16 6-7/16 3/4P503-8219S 1-1/8 ODF 8-27/32 7-1/32 29/32 6-1/8 3-1/2P503-83511S 1-3/8 ODF 12-1/4 10-5/16 31/32

8-1/4 5P503-83813S 1-5/8 ODF 12-5/32 9-29/32 1-1/8

P356A

663

FILTER DRIERS

TOTALINE® HIGH CAPACITY SUCTION LINE FILTER DRIERS — P503-8 SERIESP503-8 CAPACITY TABLE

P/NCONNECTION

(Size andType)

FLOW CAPACITY IN TONS REFRIGERANT (For kW, Multiply Tons by 3.5)R-12 R-134a R-22 R-407C

Evaporator Temperature (°F)40 20 0 –20 40 20 0 –20 40 20 0 –20 –40 40 20 0 –20 –40

Pressure Drop (PSI)2 1.5 1 0.5 2 1.5 1 0.5 3 2 1.5 1 0.5 3 2 1.5 1 0.5

P503-8083S 3/8 ODF 1.1 0.6 0.5 0.5 1.1 0.6 0.5 0.4 2.3 1.3 0.9 0.6 0.5 2.6 1.5 1.1 0.7 0.7P503-8084S 1/2 ODF 1.8 1.2 0.8 0.7 1.9 1.2 0.8 0.6 3.8 2.1 1.4 1 0.8 4.2 2.4 1.7 1.2 1.1P503-8135 5/8 SAE 2.1 1.4 1.1 0.9 2.2 1.4 1 0.8 4.4 2.5 1.7 1.2 0.9 4.9 2.9 2.1 1.5 1.2P503-8135S 5/8 ODF 2.8 1.9 1.4 1.1 2.9 1.9 1.3 1 5.8 3.2 2.2 1.6 1 6.5 3.7 2.7 2.0 1.3P503-8166S 3/4 ODF 3.8 2.5 1.8 1.2 3.9 2.5 1.7 1.1 7 4.6 3.2 2 1.1 7.8 5.3 3.9 2.5 1.5P503-8167S 7/8 ODF 5.0 3.6 2.3 1.5 5.1 3.5 2.2 1.3 9.2 6 4.1 2.6 1.4 10 6.9 4.9 3.2 1.9P503-8219S 1-1/8 ODF 7.1 5.0 3.2 1.8 7.3 4.9 3 1.6 13.2 8.5 5.7 3.5 1.8 15 9.7 6.9 4.3 2.4P503-83511S 1-3/8 ODF 8.6 5.9 3.7 2.0 8.8 5.8 3.5 1.8 16.2 10.2 6.7 4 2 18 12 8.1 4.9 2.7P503-83813S 1-5/8 ODF 9.0 6.2 3.9 2.1 9.3 6.1 3.7 1.9 17.3 10.7 7 4.2 2.1 19 12 8.4 5.2 2.8

P/NCONNECTION

(Size and Type)

FLOW CAPACITY IN TONS REFRIGERANT (For kW, Multiply Tons by 3.5)R-410A R-502 R-404A/507

Evaporator Temperature (°F)40 20 0 –20 –40 40 20 0 –20 –40 40 20 0 –20 –40

Pressure Drop (PSI)3 2 1.5 1 0.5 3 2 1.5 1 0.5 3 2 1.5 1 0.5

P503-8083S 3/8 ODF 1.6 0.9 0.6 0.4 0.3 2.2 1.1 0.7 0.5 0.3 2.1 1.1 0.7 0.5 0.3P503-8084S 1/2 ODF 2.6 1.4 1.0 0.7 0.5 3.7 1.8 1.1 0.7 0.5 3.6 1.8 1.1 0.7 0.5P503-8135 5/8 SAE 3.0 1.7 1.2 0.8 0.6 4.2 2.1 1.3 0.9 0.6 4.1 2.1 1.3 0.9 0.6P503-8135S 5/8 ODF 4.0 2.2 1.5 1.1 0.7 5.6 2.8 1.7 1.1 0.8 5.4 2.8 1.7 1.1 0.8P503-8166S 3/4 ODF 4.8 3.2 2.2 1.3 0.7 6.6 3.7 2.5 1.5 0.9 6.4 3.7 2.5 1.6 1P503-8167S 7/8 ODF 6.3 4.1 2.8 1.7 0.9 7.7 4.8 3.3 1.9 1.0 7.5 4.8 3.3 2 1.1P503-8219S 1-1/8 ODF 9.0 5.8 3.9 2.3 1.2 11 6.9 4.6 2.7 1.3 11 6.9 4.6 2.8 1.4P503-83511S 1-3/8 ODF 11 7.0 4.6 2.7 1.3 14 8.4 5.4 3.1 1.5 14 8.4 5.4 3.2 1.6P503-83813S 1-5/8 ODF 12 7.3 4.8 2.8 1.4 15 8.9 5.7 3.3 1.6 15 8.9 5.7 3.4 1.7

664

FILTER DRIERS

TOTALINE® SUCTION LINE FILTER DRIER WITH CHARCOAL — P503 SERIESAPPLICATION• Solid core with special blend to maximize acid, moisture, and wax removal.• For use with CFC, HCFC and HFC refrigerants.

FEATURES• Charcoal blend for soluble contaminant and wax removal.• Dual access valve.

SPECIFICATIONMaximum Working Pressure: 500 PSIGFiltration: 40 micronsUL & CSA Approved.

P357

P503-8S SUCTION LINE FILTER DRIERS

SNBDUAL ACCESS VALVES AND CHARCOAL BLEND


P

CUBIC INCHES OF DESICCANT S = ODF CONNECTION SIZE AND STYLE

DIMENSIONAL DATA

*B indicates lay-in length.

TOTALINE SUCTION LINE FILTER DRIER WITH CHARCOAL PHYSICAL DATA

*Dimension does not include weld bead.

P/N CONNECTIONSIZE

DIMENSIONS SHIP WT(lbs)A B D D F*

P503-8165SVB 5/8 ODF 6-3/8 5-1/8 5/84-5/8 3-9/64 2P503-8166SVB 3/4 ODF 6-3/4 5-1/2 3/8

P503-8167SVB 7/8 ODF 6-15/16 5-7/16 3/4P503-8306SVB 3/4 ODF 9-11/16 8-9/16 5/8

7-1/2 3-9/64 3-3/4P503-8307SVB 7/8 ODF 9-7/8 8-3/8 3/4P503-8309SVB 1-1/8 ODF 10-3/16 8-3/8 15/16

665

FILTER DRIERS

TOTALINE® SUCTION LINE FILTER DRIER WITH CHARCOAL — P503 SERIESP503-8 CAPACITY TABLE

P/NCONNECTION

(Size andType)




P503-8165SVB 5/8 ODF 1.9 1.4 0.8 0.6 2 1.4 0.8 0.5 3.4 2.1 1.4 0.9 0.4 3.8 2.4 1.7 1.1 0.5P503-8166SVB 3/4 ODF 2.4 1.7 1.1 0.7 2.5 1.7 1 0.6 4.2 2.6 1.7 1 0.5 4.7 3 2.1 1.2 0.7P503-8167SVB 7/8 ODF 2.6 1.8 1.2 0.7 2.7 1.8 1.1 0.6 4.6 2.8 1.9 1.1 0.6 5.1 3.2 2.3 1.4 0.8P503-8306SVB 3/4 ODF 3.3 2.3 1.5 0.9 3.4 2.3 1.4 0.8 5.5 3.5 2.3 1.4 0.8 6.1 4 2.8 1.7 1.1P503-8307SVB 7/8 ODF 3.5 2.5 1.6 0.9 3.6 2.5 1.5 0.8 6.1 3.8 2.5 1.5 0.8 6.8 4.4 3 1.9 1.1P503-8309SVB 1-1/8 ODF 3.8 2.6 1.7 0.9 3.9 2.6 1.6 0.8 6.5 4 2.6 1.6 0.8 7.2 4.6 3.1 2 1.1

P/NCONNECTION

(Size and Type)




P503-8165SVB 5/8 ODF 2.3 1.4 1 0.6 0.3 3.3 1.9 1.2 0.8 0.3 3.2 1.9 1.2 0.8 0.3P503-8166SVB 3/4 ODF 2.9 1.8 1.2 0.7 0.3 4 2.4 1.6 0.9 0.5 3.9 2.4 1.6 0.9 0.5P503-8167SVB 7/8 ODF 3.1 1.9 1.3 0.7 0.4 4.4 2.6 1.7 1 0.6 4.3 2.6 1.7 1 0.6P503-8306SVB 3/4 ODF 3.8 2.4 1.6 0.9 0.5 5.2 3.2 2.2 1.2 0.7 5 3.2 2.2 1.2 0.7P503-8307SVB 7/8 ODF 4.2 2.6 1.7 1 0.5 5.8 3.5 2.3 1.4 0.7 5.6 3.5 2.3 1.4 0.7P503-8309SVB 1-1/8 ODF 4.4 2.7 1.8 1.1 0.5 6.2 3.7 2.4 1.4 0.7 6 3.7 2.4 1.5 0.7

666

FILTER DRIERS

TOTALINE® STANDARD CAPACITY SUCTION LINE FILTER DRIERS— P503-8 SERIES

503-8 SUCTION LINE FILTER DRIERS

TYPE OF CONNECTIONS = ODFF = SAE


P



P358

APPLICATION• Totaline standard compacted bead suction filter drier for

use after burnout or when contaminant removal.• For use with CFC, HFC, and HFC refrigerants.

FEATURES• Corrosion Resistant Epoxy Powder Paint Finish• Solid Copper Fittings• Dual Access Valves

STANDARD SUCTIONFILTER DRIER

DIMENSIONAL DATA

SPECIFICATIONSFiltration: 40 micronsMax Working Pressure: 400 PSIGUL & CSA Approved

P358A

TOTALINE STANDARD CAPACITY SUCTION LINE FILTER DRIERS PHYSICAL DATA

P/N CONNECTIONSIZE

DIMENSIONS SHIPPING WT (lbs)

DESICCANTVOLUME(cu in.)

CAPACITY (TONS)*

A B C D R-134a R-22 R-404A/R-507

P503-8133FSFD 3/8 SAE N/A 3-3/8 5.5 3-11/16 2 13.5 1/8 -1/3 1/2 - 1 1/2 - 1P503-8133SSFD 3/8 ODF 3-31/32 3-3/8 4-27/32 3-11/16 2 13.5 1/8 -1/3 1/2 - 1 1/2 - 1P503-8134FSFD 1/2 SAE N/A 3-3/8 5-3/4 3-11/16 2 13.5 1/4 - 1/2 1 - 2 1/2 - 1-3/4P503-8134SSFD 1/2 ODF 3-15/16 3-3/8 4-15/16 3-11/16 2 13.5 1/4 - 1/2 1 - 2 1/2 - 1-3/4P503-8135FSFD 5/8 SAE N/A 3-3/8 6-1/8 3-11/16 2 13.5 3/4 - 1 2 - 2-1/2 3/4 - 2P503-8135SSFD 5/8 ODF 3-29/32 3-3/8 5-5/32 3-11/16 2 13.5 2 - 2-1/2 2 - 2-1/2 3/4 - 2P503-8136SSFD 3/4 ODF 4 3-3/8 5-1/4 3-11/16 2 13.5 1- 2 2-1/2 - 3-1/4 3P503-8137SSFD 7/8 ODF 4-1/4 3-3/8 5-3/4 3-11/16 2 13.5 1-1/2 - 2 1-1/2 - 3 1-1/2 - 3P503-8277SSFD 7/8 ODF 6 5-1/8 7-1/2 3-11/16 3 27.0 1-1/2 - 3 1-1/2 - 4 1-1/2 - 4P503-8279SSFD 1-1/8 ODF 5-13/16 5-1/8 7-5/8 3-11/16 3 27.0 3 - 4 3 - 9 3 - 5P503-85411SSFD 1-3/8 ODF 10-5/16 8-1/4 12-1/4 3-11/16 4.5 54.0 5 - 7-1/2 5 - 10 5 - 9P503-85413SSFD 1-5/8 ODF 9-29/32 8-1/4 12-5/32 3-11/16 4.5 54.0 7-1/2 - 10 7-1/2 - 15 6 - 10

667

FILTER DRIERS

TOTALINE® STANDARD CAPACITY SUCTION LINE FILTER DRIERS— P503-8 SERIESP503-8 CAPACITY TABLE

P/NCONNECTION

(Size andType)




P503-8133FSFD 3/8 SAE 0.7 0.4 0.2 0.1 0.7 0.4 0.2 0.1 1.4 0.8 0.4 0.2 0.1 1.6 0.9 0.5 0.2 0.1P503-8133SSFD 3/8 ODF 1.3 0.8 0.5 0.2 1.3 0.8 0.5 0.2 2.2 1.3 0.8 0.5 0.2 2.4 1.5 1 0.6 0.3P503-8134FSFD 1/2 SAE 1.5 1 0.6 0.3 1.5 1 0.6 0.3 2.4 1.6 1.1 0.7 0.4 2.7 1.8 1.3 0.9 0.5P503-8134SSFD 1/2 ODF 2.2 1.5 1.1 0.6 2.3 1.5 1 0.5 3.5 2.3 1.6 1 0.6 3.9 2.6 1.9 1.2 0.8P503-8135FSFD 5/8 SAE 2.4 1.7 1.2 0.7 2.5 1.7 1.1 0.6 3.7 2.4 1.6 1 0.6 4.1 2.8 1.9 1.2 0.8P503-8135SSFD 5/8 ODF 3 2.1 1.4 0.8 3.1 2.1 1.3 0.7 4.9 3.2 2.2 1.4 0.8 5.5 3.7 2.7 1.7 1.1P503-8136SSFD 3/8 ODF 4 2.7 1.8 1 4.1 2.7 1.7 0.9 6.4 4.2 2.8 1.8 1 7.1 4.8 3.4 2.2 1.3P503-8137SSFD 7/8 ODF 4.3 3.1 2 1.1 4.4 3 1.9 1 7.2 4.6 3 1.9 1 8 5.3 3.6 2.3 1.3P503-8277SSFD 7/8 ODF 4.6 3.2 2 1.1 4.7 3.1 1.9 1 7.5 4.8 3.2 2 1.1 8.3 5.5 3.9 2.5 1.5P503-8279SSFD 1-1/8 ODF 5.1 3.5 2.1 1.1 5.2 3.4 2 1 8.5 5.4 3.5 2.1 1.1 9.5 6.2 4.2 2.6 1.5P503-85411SSFD 1-3/8 ODF 4.4 2.9 1.8 1 4.5 2.9 1.7 0.9 7.3 4.6 3 1.8 1 8.1 5.3 3.6 2.2 1.3P503-85413SSFD 1-5/8 ODF 4.5 3.1 1.9 1 4.6 3 1.8 0.9 7.4 4.7 3.2 2 1 8.2 5.4 3.9 2.5 1.3

P/NCONNECTION

(Size and Type)




P503-8133FSFD 3/8 SAE 1 0.5 0.3 0.1 0.1 1.3 0.7 0.4 0.2 0.1 1.3 0.7 0.4 0.2 0.1P503-8133SSFD 3/8 ODF 1.5 0.9 0.5 0.3 0.1 2 1.1 0.7 0.4 0.2 1.9 1.1 0.7 0.4 0.2P503-8134FSFD 1/2 SAE 1.6 1.1 0.7 0.5 0.3 2.2 1.3 0.9 0.5 0.3 2.1 1.3 0.9 0.5 0.3P503-8134SSFD 1/2 ODF 2.4 1.6 1.1 0.7 0.4 3.1 1.9 1.3 0.8 0.4 3 1.9 1.3 0.8 0.4P503-8135FSFD 5/8 SAE 2.5 1.6 1.1 0.7 0.4 3.3 2 1.4 0.9 0.5 3.2 2 1.4 0.9 0.5P503-8135SSFD 5/8 ODF 3.3 2.2 1.5 0.9 0.5 4.3 2.7 1.8 1.1 0.6 4.2 2.7 1.8 1.1 0.6P503-8136SSFD 3/8 ODF 4.4 2.9 1.9 1.2 0.7 5.8 3.5 2.3 1.4 0.7 5.6 3.5 2.3 1.4 0.7P503-8137SSFD 7/8 ODF 4.9 3.2 2 1.3 0.7 6.5 3.9 2.6 1.4 0.8 6.3 3.9 2.6 1.5 0.8P503-8277SSFD 7/8 ODF 5.1 3.3 2.2 1.3 0.7 6.7 4.1 2.7 1.5 0.8 6.5 4.1 2.7 1.6 0.8P503-8279SSFD 1-1/8 ODF 5.8 3.7 2.4 1.4 0.7 7.7 4.6 3 1.6 0.8 7.5 4.6 3 1.7 0.9P503-85411SSFD 1-3/8 ODF 5 3.2 2 1.2 0.7 6.6 3.9 2.5 1.4 0.7 6.4 3.9 2.5 1.5 0.7P503-85413SSFD 1-5/8 ODF 5.1 3.2 2.2 1.3 0.7 6.7 4 2.6 1.5 0.8 6.5 4 2.6 1.6 0.8

668

FILTER DRIERS

ALCO ASD PLUS SUCTION LINE FILTER DRIER• Rugged steel shells for shock resistance

• Low pressure drop - full flow fittings

• Dual access valves

• Solid copper sweat connections

• Corrosion resistant epoxy powder paint finish

NOMENCLATURE/SELECTION

DIMENSIONAL DATA

ASD 35 S 5 VVSeries Unit Size

(in cu. in.)S = ODF

Connections F = SAE

Connection Size

(in 1/8″)

Suction Line Service

Above example: ASD 35S5VV

P977A

P977

CATALOG NUMBER

CONNECTIONSIZE

DIMENSIONS SHIP. WEIGHT

(lbs)A B C D E*

ASD 28S3VV 3/8 ODF 5-19/32 4-23/32 7/164-1/8

3-11/16

2ASD 28S4VV 1/2 ODF 5-11/16 4-11/16 1/2ASD 35F5VV 5/8 SAE 7-9/16 -- --

4-3/4 2-1/2ASD 35S5VV 5/8 ODF 6-17/32 5-9/32 5/8ASD 45S6VV 3/4 ODF 7-3/4 6-1/2 5/8

5-9/16 3ASD 45S7VV 7/8 ODF 7-15/16 6-7/16 3/4ASD 50S9VV 1-1/8 ODF 8-27/32 7-1/32 29/32 6-1/8 3-1/2

ASD 75S11VV 1-3/8 ODF 12-1/4 10-5/16 31/328-1/4 5

ASD 75S13VV 1-5/8 ODF 12-5/32 9-29/32 1-1/8


ASD CAPACITY TABLES

* All ratings in accordance with ARI standard 710-86.

A suction line filter drier with an oversized liquid line filter drier is an effective means of system clean-up to protect a new compressor following a burn-out. ALCO suction line System Protectors installed near the compressor suction provide this pollution protection without causing excessive pressure drop.

Selection of a unit with a high pressure drop will result in reduced system capacity and a significant added operating period to overcome this loss.Such extended operation will add unnecessary cost to the owners periodic energy bill. The capacities shown here afford optimum system operating efficiencies.

P/NCONNECTION SIZE

AND TYPE

FLOW CAPACITY* IN TONS @ 1 PSI ∆ PRESSUREREFRIGERANT

R-134a R-22 R-404A/R-507EVAPORATOR TEMPERATURE °F

40 20 0 -20 40 20 0 -20 -40 40 20 0 -20 -40PRESSURE DROP PSI

2 1.5 1 .05 3 2 1.5 1 0.5 3 2 1.5 1 0.5ASD 28S3VV 3/8 ODF 1.1 .6 .5 .4 2.3 1.3 .9 .6 .5 2.1 1.1 .7 .5 .3ASD 28S4VV 1/2 ODF 1.9 1.2 .8 .6 3.8 2.1 1.4 1.0 .8 3.6 1.8 1.1 .7 .5ASD 35F5VV 5/8 SAE 2.2 1.4 1.0 .8 4.4 2.5 1.7 1.2 .9 4.1 2.1 1.3 .9 .6ASD 35S5VV 5/8 ODF 2.9 1.9 1.3 1.0 5.8 3.2 2.2 1.6 1.0 5.4 2.8 1.7 1.1 .8ASD 45S6VV 3/4 ODF 3.9 2.5 1.7 1.1 7.0 4.6 8.2 2.0 1.1 6.4 3.7 2.5 1.6 1.0ASD 45S7VV 7/8 ODF 5.1 3.5 2.2 1.3 9.2 6.0 4.1 2.6 1.4 7.5 4.8 3.3 2.0 1.1ASD 50S9VV 1-1/8 ODF 7.3 4.9 3.0 1.6 13.2 8.5 5.7 3.5 1.8 10.9 6.9 4.6 2.8 1.4ASD 75S11VV 1-3/8 ODF 8.8 5.8 3.5 1.8 16.2 10.2 6.7 4.0 2.0 13.6 8.4 5.4 3.2 1.6ASD 75S13VV 1-5/8 ODF 9.3 6.1 3.7 1.9 17.3 10.7 7.0 4.2 2.1 14.5 8.9 5.7 3.4 1.7

Filtration recommendation:

Maximum working pressure:

40 microns

500 PSIG

669

FILTER DRIERS

ALCO SFD SUCTION LINE FILTER DRIER• Solid copper fittings• Dual access valves• Rugged steel shells for shock resistance• Corrosion resistant epoxy powder paint finish• Low pressure drop - full flow fittings

NOMENCLATURE/SELECTION

SFD 13 S 5 VVSeries Unit Size

(in cu. in.)S = ODF

Connections F = SAE

Connection Size

(in 1/8″)


Above example: SFD 13S5-VV

P978

P/N CONNECTIONSIZE

DIMENSIONS SHIPWEIGHT

(lbs)A B C D

SFD 08FS-VV 3/8 SAE N/A

3-3/8

5-1/2

3-1/8

2

SFD 08S3-VV 3/8 ODF 5-5/16 6-3/16SFD 08F4-VV 1/2 SAE N/A 5-3/4SFD 08S4-VV 1/2 ODF 3-15/16 5SFD 08S5-VV 5/8 ODF 3-29/32 5-5/32SFD 08S6-VV 3/4 ODF 4-5/16 5-9/16SFD 13F3-VV 3/8 SAE -- 5-1/2

3-11/16

SFD 13S3-VV 3/8 ODF 3-31/32 4-27/32SFD 13F4-VV 1/2 SAE -- 5-3/4SFD 13S4-VV 1/2 ODF 3-15/16 4-15/16SFD 13F5-VV 5/8 SAE -- 6-1/8SFD 13S5-VV 5/8 ODF 3-29/32 5-5/32SFD 13S6-VV 3/4 ODF 4 5-1/4SFD 13S7-VV 7/8 ODF 4-1/4 5-3/4SFD 27S6-VV 3/4 ODF 5-3/4

5-1/87

3SFD 27S7-VV 7/8 ODF 6 7-1/2SFD 27S9-VV 1-1/8 ODF 5-13/16 7-5/8SFD 54S11-VV 1-3/8 ODF 10-5/16

8-1/412-1/4

4-1/2SFD 54S13-VV 1-5/8 ODF 9-29/32 12-5/32

Filtration recommendation:

Maximum working pressure:

40 microns

400 PSIG

DIMENSIONAL DATA

P978A

D

SFD CAPACITY TABLE

SFD Flow Capacity in Tons at Listed Conditions*

P/N

R-134a R-22 R-404A/R-507AEvaporator Temperature (F)

40 20 0 -10 40 20 0 -20 -40 40 20 0 -20 -40Pressure Drop

2 1.5 1 0.5 3 2 1.5 1 0.5 3 2 1.5 1 0.5SFD 13F3-VV 0.7 0.4 0.2 0.1 1.4 0.8 0.4 0.2 0.1 1.3 0.7 0.4 0.2 0.1SFD 13S3-VV 1.3 0.8 0.5 0.2 2.2 1.3 0.8 0.5 0.2 1.9 1.1 0.7 0.4 0.2SFD 13F4-VV 1.5 1.0 0.6 0.3 2.4 1.6 1.1 0.7 0.4 2.1 1.3 0.9 0.5 0.3SFD 13S4-VV 2.3 1.5 1.0 0.5 3.5 2.3 1.6 1.0 0.6 3.0 1.9 1.3 0.8 0.4SFD 13F5-VV 2.5 1.7 1.1 0.6 3.7 2.4 1.6 1.0 0.6 3.2 2.0 1.4 0.9 0.5SFD 13S5-VV 3.1 2.1 1.3 0.7 4.9 3.2 2.2 1.4 0.8 4.2 2.7 1.8 1.1 0.6SFD 13S6-VV 4.1 2.7 1.7 0.9 6.4 4.2 2.8 1.8 1.0 5.6 3.5 2.3 1.4 0.7SFD 13S7-VV 4.4 3.0 1.9 1.0 7.2 4.6 3.0 1.9 1.0 6.3 3.9 2.6 1.5 0.8SFD 27S6-VV 4.1 2.7 1.7 0.9 6.4 4.2 2.8 1.8 1.0 5.6 3.5 2.3 1.4 0.7SFD 27S7-VV 4.7 3.1 1.9 1.0 7.5 4.8 3.2 2.0 1.1 6.5 4.1 2.7 1.6 0.8SFD 27S9-VV 5.2 3.4 2.0 1.0 8.5 5.4 3.5 2.1 1.1 7.5 4.6 3.0 1.7 0.9SFD 54S11-VV 4.5 2.9 1.7 0.9 7.3 4.6 3.0 1.8 1.0 6.4 3.9 2.5 1.5 0.7SFD 54S13-VV 4.6 3.0 1.8 0.9 7.4 4.7 3.2 2.0 1.0 6.5 4.0 2.6 1.6 0.8

*All ratings in accordance with ARI standard 730-86.

670

FILTER DRIERS

ALCO ASK-HH SUCTION LINE FILTER DRIERAll Alco filter driers are specifically designed to protect the refrigerant system from liquid and solid contaminants. They incorporate a desiccant specially formulated and blended for maximum moisture, and include advanced materials to remove acid and contaminants.

FEATURES

• Full flow fittings for low pressure drop



• Rugged shock resistant steel shells

• Charcoal blend for soluble contaminant and wax removal

• Solid copper fittings

SPECIFICATIONS:

Maximum working pressure: 500 psiUL file number: SA 3124CSA file number: LR 100624

LR 32462

P353

P/NCONNEC-TION SIZE & STYLE

DIMENSIONS SHIP WEIGHT

(lbs)A B D E F*

ASK 165S-VV-HH 5/8 ODF 6-3/8 5-1/8 5/8

4-5/8 2-7/8 2ASK 166S-VV-HH 3/8 ODF 6-3/4 5-1/2 3/8ASK 167S-VV-HH 7/8 ODF 6-15/16 5-7/16 3/4ASK 306S-VV-HH 3/4 ODF 9-11/16 8-9/16 5/8

7-1/2 3-1/16 3-3/4ASK 307S-VV-HH 7/8 ODF 9-7/8 8-3/8 3/4ASK 309S-VV-HH 1-1/8 ODF 10-3/16 8-3/8 15/16

*Dimension does not include weld bead.

ASK-HH FLOW CAPACITY TABLE

*All ratings in accordance with ARI Standard 730-86.

Flow Capacity in Tons at Listed Conditions*

P/N

R-134a R-22 R-404A/R-507AEvaporator Temperature (F)

40 20 0 -10 40 20 0 -20 -40 40 20 0 -20 -40Pressure Drop

2 1.5 1 0.5 3 2 1.5 1 0.5 3 2 1.5 1 0.5ASK 165S-VV-HH 2.0 1.4 0.8 0.5 3.4 2.1 1.4 0.9 0.4 3.2 1.9 1.2 0.8 0.3ASK 166S-VV-HH 2.5 1.7 1.0 0.6 4.2 2.6 1.7 1 0.5 3.9 2.4 1.6 0.9 0.5ASK 167S-VV-HH 2.7 1.8 1.1 0.6 4.6 2.8 1.9 1.1 0.6 4.3 2.6 1.7 1.0 0.6ASK 306S-VV-HH 3.4 2.3 1.4 0.8 5.5 3.5 2.3 1.4 0.8 5.0 3.2 2.2 1.2 0.7ASK 307S-VV-HH 3.6 2.5 1.5 0.8 6.1 3.8 2.5 1.5 0.8 5.6 3.5 2.3 1.4 0.7ASK 309S-VV-HH 3.9 2.6 1.6 0.8 6.5 4 2.6 1.6 0.8 6.0 3.7 2.4 1.5 0.7

ASK-HH WATER CAPACITY TABLE

Water Capacity - (Drops of Water)

SIZER-134a R-22 R-407/R-507A

Evaporator Temperature (F)40 0 -20 40 0 -40 40 0 -40

16 85 88 88 85 88 88 85 88 8830 155 160 160 155 160 160 155 160 160

NOMENCLATURE

ASK 16 5 S VV HHSeries Unit Size

(in cu in.)Connection

Size (in 1/8″)

S = ODF Connection

DualAccessValves

CharcoalBlend

Above example: ASK 305S-V

DIMENSIONAL DATA

*B Indicates Laying Length.

671

FILTER DRIERS

ALCO CSFD COMPACT SUCTION LINE FILTER DRIERThe Alco CSFD filter drier should be used for motor burnout clean-up applications. It uses a molded desiccant core block that effectively removes and holds a maximum amount of contaminants with a minimum pressure drop.

FEATURES

• For use with HCFCs, CFCs, and the lubricants that go with them


• Solid block desiccant core

• High acid removal

• Solid copper ODF fittings


SPECIFICATIONS

Maximum working pressure: 500 psigUL file number: SA 3124CSA file number: LR 100624

NOMENCLATURE

CSFD 14 S 4 VV

Series Unit Size S = ODFConnection

ConnectionSize

(in 1/8″)

DualAccess Valve

Above example: CSFD 14S4- VV

DIMENSIONAL DATA

CONNECTION DIMENSIONS (in.)P/N TYPE (in.) A B C

CSFD-14S4-VV 1/2 SOLDER 4-1/4

2-3/4 4-5/8CSFD-14S5-VV 5/8 SOLDER 4-1/2CSFD-14S6-VV 3/4 SOLDER 4-3/8CSFD-14S7-VV 7/8 SOLDER 4-9/16CSFD-14S9-VV 1-1/8 SOLDER 4-7/8

CSFD CAPACITY TABLES IN TONS

P/N

FLOW CAPACITY*IN TONS REFRIGERANT

R-134a R-22 R-404A/R-507EVAPORATOR TEMPERATURE °F

40 20 0 -20 40 20 0 -20 -40 40 20 0 -20 -402 1.5 1 .05 3 2 1.5 1 0.5 3 2 1.5 1 0.5

CSFD14S4-VV 1.3 0.9 0.5 0.3 2.0 1.3 0.9 0.6 0.3 1.3 0.8 0.5 0.3 0.2CSFD14S5-VV 2.3 1.5 0.9 0.5 3.6 2.4 1.6 1.0 0.5 2.6 1.7 1.1 0.7 0.3CSFD14S6-VV 3.1 2.1 1.3 0.7 4.9 3.2 2.2 1.4 0.7 3.6 2.3 1.5 0.9 0.5CSFD14S7-VV 3.3 2.0 1.4 0.7 5.2 3.4 2.3 1.5 0.8 3.6 2.3 1.5 0.9 0.5CSFD14S9-VV† 4.5 3.0 1.8 1.0 7.0 4.6 3.1 2.0 1.0 4.9 3.1 2.0 1.3 0.7

*All ratings in accordance with ARI standard 730-86.†400 Maximum Working Pressure.

P2019

672

FILTER DRIERS

ALCO ASF PLUS SUCTION LINE FILTER (FILTERS ONLY)FEATURES

• Rugged steel shells for shock resistance

• Low pressure drop - full flow fittings


• Solid copper fittings - easy to sweat in


SPECIFICATIONS

Filtration recommendation: 40 micronsMaximum working pressure: 500 psigUL file number: SA 3124CSA file number: LR 100624

LR 32462

DIMENSIONAL DATA

P980A

P980

P/N CONNECT-ION SIZE

DIMENSIONS SHIP WEIGHT

(lbs)A B C D E*

ASF 11S4 1/2 ODF 4- 3/8 3-3/8 1/22-7/8 2-5/8 1-1/2

ASF 11S5 5/8 ODF 4- 5/8 3-3/8 5/8

ASF 28S3-VV 3/8 ODF 5-19/32 4-23/32 7/164-1/8

3-11/16

2ASF 28S4-VV 1/2 ODF 5-11/16 4-11/16 1/2ASF 35F5-VV 5/8 SAE 7-9/16 -- --

4-3/4 2-1/2ASF 35S5-VV 5/8 ODF 6-17/32 5-9/32 5/8ASF 45S6-VV 3/4 ODF 7-3/4 6-1/2 5/8

5-9/16 3ASF 45S7-VV 7/8 ODF 7-15/16 6-7/16 3/4ASF 50S9-VV 1-1/8 ODF 8-27/32 7-1/32 29/32 6-1/8 3-1/2

ASF 64S17-V 2-1/8 ODF 11-3/4 9-1/161

5/16 7-5/8

56-1/2

ASF 64S21-V 2-5/8 ODF 13 10 1-1/2 7-7/8

ASF 75S11-VV 1-3/8 ODF 12-1/4 10-5/16 31/328-1/4 5

ASF 75S13-VV 1-5/8 ODF 12-5/32 9-29/32 1-1/8


ASF CAPACITY TABLE

P/NCONNECTION SIZE

and TYPE

FLOW CAPACITY* IN TONS REFRIGERANTR-134a R-22 R-404A/R-507

EVAPORATOR TEMPERATURE °F40 20 0 -20 40 20 0 -20 -40 40 20 0 -20 -40

PRESSURE DROP PSI2 1.5 1 .05 3 2 1.5 1 0.5 3 2 1.5 1 0.5

ASF 11S4 1/2 ODF 1.8 1.2 0.9 0.5 2.6 1.9 1.4 0.9 0.6 2.2 1.5 1.1 0.7 0.4ASF 11S5 5/8 ODF 2.9 2.1 1.5 0.9 4.2 3 2.3 1.5 1 3.5 2.4 1.8 1.2 0.7ASF 28S3-VV 3/8 ODF 1.2 .8 .5 .4 2.4 1.3 .9 .7 .5 2.2 1.1 .7 .5 .3ASF 28S4-VV 1/2 ODF 2.0 1.3 .9 .7 4.1 2.3 1.6 1.2 .9 3.8 2.0 1.2 .8 .6ASF 35F5-VV 5/8 SAE 2.3 1.5 1.0 .8 4.7 2.6 1.8 1.3 1.0 4.4 2.3 1.4 .9 .7ASF 35S5-VV 5/8 ODF 3.3 2.2 1.5 1.2 6.6 3.7 2.6 1.9 1.6 6.1 3.2 2.0 1.4 1.0ASF 45S6-VV 3/4 ODF 4.8 3.1 2.2 1.6 9.8 5.5 3.7 2.7 2.2 9.1 4.7 2.9 1.9 1.4ASF 45S7-VV 7/8 ODF 6.7 4.7 3.1 1.7 12.1 8.0 5.6 3.6 2.0 9.8 6.3 4.5 2.8 1.5ASF 50S9-VV 1-1/8 ODF 9.5 6.7 4.3 2.3 19.1 12.2 8.2 4.9 2.6 15.8 10.0 6.7 4.0 2.0ASF 64S17-V 2-1/8 ODF 26 18 12 6.4 41 27 19 12 6.9 35 23 15 9.8 5.2ASF 64S21-V 2-5/8 ODF 31 21 14 7.9 46 31 22 14 8.6 40 26 18 12 6.5ASF 75S11-VV 1-3/8 ODF* 12.4 8.7 5.6 3.0 24.3 15.3 10.3 6.5 3.2 20.1 12.7 8.3 5.1 2.6ASF 75S13-VV 1-5/8 ODF* 13.5 9.5 6.3 3.4 24.9 15.7 10.6 6.7 3.3 20.8 12.8 8.4 5.2 2.7

*All ratings in accordance with ARI standard 730-86.

NOMENCLATURE

ASF 35 S 5 VV

Series Unit Size(in cu. in.)

S = ODF Connection

F = SAE

Connection Size

(in 1/8″)


Above example: ASF 35S5-VV

673

FILTER DRIERS

TOTALINE® SUCTION LINE FILTER — P507-8 SERIES

APPLICATIONTotaline Suction Line Filters protect the compressor from harmful solid contaminants.

FEATURES• Dual Access Valves• Corrosion Resistant Epoxy Paint Finish

SPECIFICATIONS• Maximum Working Pressure: 500 PSIG• Filtration: 40 microns• UL & CSA Approved

507-8 SUCTION LINE FILTERS

TYPE OF CONNECTIONS = SOLDER (ODF)NO LETTER = MALE x MALE FLARE

(EXCEPT CORE SHELLS WHICH ARE SOLDER)


P



PHYSICAL DATA TABLE

P/N UNIT SIZE(in cu in.)

CONNECTIONSIZE

(Type (in.)

DIMENSIONS SHIPPING WT(lbs)A B C D E

P507-8214S 28 1/2 ODF ASF GD-6054 5-11/16 4-11/16 1/2 4-1/8 3-11/16 2P507-8355 35 5/8 SAE ASF35FW 5 7-9/16 — — 4-3/4 3-11/16 2-1/2P507-8355S 35 5/8 ODF ASF GD-6054 6-17/32 5-9/32 5/8 4-3/4 3-11/16 2-1/2P507-8456S 45 3/4 ODF ASF GD-6054 7-3/4 6-1/2 5/8 5-9/16 3-11/16 3P507-8457S 45 7/8 ODF ASF GD-6054 7-15/16 6-7/16 3/4 5-9/16 3-11/16 3P507-8569S 50 1-1/8 ODF ASF GD-6054 8-27/32 7-1/32 29/32 6-1/8 5 3-1/2P507-89011S 75 1-3/8 ODF ASF GD-6054 12-1/4 10-5/16 31/32 8-1/4 5 5

P356

DIMENSIONAL DATA

P356A

674

FILTER DRIERS

TOTALINE® SUCTION LINE FILTER — P507-8 SERIESCAPACITY TABLE

P/NCONNECTION

(Size andType)




P507-8214S 1/2 ODF 1.9 1.3 0.9 0.8 2 1.3 0.9 0.7 4.1 2.3 1.6 1.2 0.9 4.6 2.6 1.9 1.5 1.2P507-8355 5/8 SAE 2.2 1.5 1.1 0.9 2.3 1.5 1 0.8 4.7 2.6 1.8 1.3 1 5.2 3 2.2 1.6 1.3P507-8355S 5/8 ODF 3.2 2.2 1.6 1.4 3.3 2.2 1.5 1.2 6.6 3.7 2.6 1.9 1.6 7.3 4.2 3.1 2.3 2.1P507-8456S 3/4 ODF 4.7 3.2 2.3 1.8 4.8 3.1 2.2 1.6 9.8 5.5 3.7 2.7 2.2 11 6.3 4.5 3.3 3P507-8457S 7/8 ODF 6.5 4.8 3.3 1.9 6.7 4.7 3.1 1.7 12 8 5.6 3.6 3 13 9.2 6.8 4.4 4P507-8569S 1-1/8 ODF 9.2 6.8 4.5 2.6 9.5 6.7 4.3 2.3 19 12 8.2 4.9 2.6 21 14 9.9 6 3.5P507-89011S 1-3/8 ODF 11.7 8.8 5.9 3.4 12 8.7 5.6 3 24 15 10 6.5 3.2 27 17 12 8 4.3

P/NCONNECTION

(Size and Type)




P507-8214S 1/2 ODF 2.8 1.6 1.1 0.8 0.6 3.9 2 1.2 0.8 0.6 3.8 2 1.2 0.8 0.6P507-8355 5/8 SAE 3.2 1.8 1.2 0.9 0.7 4.5 2.3 1.4 0.9 0.7 4.4 2.3 1.4 0.9 0.7P507-8355S 5/8 ODF 4.5 2.5 1.8 1.3 1 6.3 3.2 2 1.4 0.9 6.1 3.2 2 1.4 1P507-8456S 3/4 ODF 6.7 3.8 2.5 1.8 1.4 9.4 4.7 2.9 1.8 1.3 9.1 4.7 2.9 1.9 1.4P507-8457S 7/8 ODF 8.2 5.5 3.8 2.4 2 10 6.3 4.5 2.7 1.4 9.8 6.3 4.5 2.8 1.5P507-8569S 1-1/8 ODF 13 8.2 5.6 3.3 1.7 16 10 6.6 3.9 1.9 16 10 6.7 4 2P507-89011S 1-3/8 ODF 16 10 6.8 4.3 2.1 21 13 8.2 4.9 2.4 20 13 8.3 5.1 2.6

675

FILTER DRIERS

TOTALINE® HEAT PUMP FILTER DRIERS — P504 SERIES

APPLICATIONAvailable in two basic sizes, Totaline New Bi-Directional Filter Drier provides heat pump system protection in heating and cooling cycles summer and winter ... with one compact unit. It reduces complex piping and the resulting costs.

FEATURES• Removes moisture, acids and solids.• Bi-Directional...Eliminates need for external check valves.• Sealed type.• Corrosion resistant epoxy powder paint finish.• May be mounted in any position.• Reduces compressor maintenance.• Solid copper sweat connections.• Desiccant blend — 75% molecular sieve and 25% activated alumina.

SPECIFICATIONS• Filtration: 40 microns• Maximum Working Pressure: 600 PSIG

504-8 HEAT PUMPFILTER DRIERS

TYPE OF CONNECTIONS = SOLDERMF = MALE x FEMALE FLAREFM = FEMALE x MALE FLARENO LETTER = MALE x MALE FLARE


P



DIMENSIONAL DATA

P359

P4403AP4403B

PHYSICAL DATA

P/N CONNECTIONSIZE & STYLE

DIMENSIONS (in.) SHIPPING WT(lbs)A B C D E

P504-8083 3/8 SAE 5.94 3.82 — 2.62 — 1P504-8083S 3/8 ODF 5.29 3.82 4.48 2.62 0.4 1P504-8084 1/2 SAE 6.16 3.82 — 2.62 — 1P504-8084S 1/2 ODF 5.38 3.82 4.38 2.62 0.5 1P504-8085 5/8 SAE 6.62 3.82 — 2.62 — 1P504-8085S 5/8 ODF 5.6 3.82 4.35 2.62 0.63 1P504-8163 3/8 SAE 6.74 4.61 — 2-5/8 — 2P504-8163S 3/8 ODF 6.08 4.61 5.28 2-5/8 0.4 2P504-8164 1/2 SAE 6.96 4.61 — 2-5/8 — 2P504-8164S 1/2 ODF 6.17 4.61 5.17 3.15 0.5 3.75P504-8165 5/8 SAE 7.41 4.61 — 3.15 — 3.75P504-8165S 5/8 ODF 6.39 4.61 5.14 3.15 0.63 3.75

676

FILTER DRIERS

TOTALINE® HEAT PUMP FILTER DRIERS — P504 SERIES

INTERNAL CONSTRUCTION BASIC FLOW PATTERNS

P2561 P2562

TOTALINE HEAT PUMP FILTER DRIERS CAPACITY TABLE

P/NFLOW CAPACITY TONS

@ 1 PSI

WATER CAPACITYDrops of Water

R-22 R-407C R-410AR-22 R-410A R-407C 75 F 125 F 75 F 125 F 75 F 125 F

P504-8083 4.5 4.5 4.4 159 144 106 79 85 75P504-8083S 5.1 5.1 5 159 144 106 79 85 75P504-8084 6.4 6.4 6.3 159 144 106 79 85 75P504-8084S 6.7 6.7 6.6 159 144 106 79 85 75P504-8085 7.8 7.8 7.7 159 144 106 79 85 75P504-8085S 8.1 8.1 7.9 159 144 106 79 85 75P504-8163 4.6 4.6 4.5 323 294 237 179 178 160P504-8163S 5.2 5.2 5.1 323 294 237 179 178 160P504-8164 7.7 7.7 7.6 323 294 237 179 178 160P504-8164S 8.1 8.1 7.9 323 294 237 179 178 160P504-8165 8.3 8.3 8.1 323 294 237 179 178 160P504-8165S 8.7 8.7 8.5 323 294 237 179 178 160

677

FILTER DRIERS

ALCO AOFD 553 OIL FILTER DRIERALCO’s AOFD is designed specifically for refrigerant systems that use POE oil. POE oil is hygroscopic in nature, which means that it attracts and absorbs water. Moisture in a closed system can produce acid and will harm the compressor. ALCO’s AOFD protects compressors by removing moisture and trapping contaminants.

FEATURES• Designed to clean and dry POE Oil

• 3/8″ male flare connections for easy replacement

• Large filter surface area to provide maximum filtration

• Contains 100% molecular sieve XH-9 Desiccant for moisture removal

• Designed to operate at a very low pressure drop

• 10 micron filtration for optimum oil cleaning

AOFD WATER CAPACITY TABLE

REFRIGERANTTYPE

DROPS@ 125° F

R-22 497R-134a 518R-404A 518R-407C 435DIMENSIONAL DATA

ORDERING INFORMATION FOR AOFD FILTER DRIER

DESCRIPTIONAOFD 553 OIL FILTER DRIER

OIL FILTER ASF 45 F 3-VV

FEATURES• Specifically designed to protect the compressor from dirt and

all solid contaminants• Full flow fittings minimizes pressure drop


• 3/8″ SAE connections for easy installation on oil lines

• Filtration to 10 microns for maximum compressor protection


SPECIFICATIONSMaximum working pressure: 500 psigUL file number: SA 3124CSA file number: LR 32462

P2022

P980

ORDERING INFORMATION FOR ASF

DESCRIPTIONASF 45 F 3-VV

678

FILTER DRIERS

HENRY CAPILLARY TUBE REFRIGERANT DRIERS

HENRY “TEE” TYPE REPLACEABLE CARTRIDGE FILTER DRIERSWITH REMOVABLE SELF-CONTAINED MOISTURE-LIQUID INDICATOR CAP ASSEMBLY

• 100% MOLECULAR SIEVES

• COPPER TUBE BODY

• SEALED EXTENDED COPPER ENDS

• MAXIMUM WORKING PRESSURE - 350 PSIG

NOTE: Packed in lots of six driers.

†For Refrigerants 500 and 502, use data shown for Refrigerant 12.

SIZESOLDER

CONN. (in.)

SPECIFICATIONS (in.)RECOMMENDED

TONNAGE BASED ON BOTH DRYING

AND FLOW†

CAPACITY RATINGSDRYING CAPACITY

POUNDS OF REFRIG.

P/NDROPS OF WATER REFRIGERANTS

DIMENSIONS (in.) R-404A/R-507 R-22 (60 PRM) R-134a R-22

INLET OUTLETCUBICVOL.

SHELLDIA.

OVER-ALL

LENGTH

WEIGHT(lbs)

REFRIGERANTS LIQUID LINE TEMP (°F) LIQUID LINE TEMP (°F)

R-134a R-22 75 125 75 125 75 125 75 125

Multi-Pack Driers1/4 ODM x 3/16 ODS

1 3/4 7-1/2 1/4 3/4 1/2 36 36 31 23 7.2 7.2 3.5 2.6 V103-6

P366

Our unique transverse flow pattern utilizes the maximum filter surface area possible. This extra large surface area traps contaminants down to 10 microns and will main-tain the high flow capacity even after prolonged use. Inside this molded felt core is a desiccant blend of Activated Alumina and Molecular Sieves to effectively remove moisture and acids.

Based on both drying and flow capacities, the “TEE” type filter driers have a capacity rating of 10 tons on R-12 and 12-1/2 tons on R-22. Vibration resistance tests conducted by an independent laboratory proved these units are especially suited for the transportation industry. 500 P.S.I. working pressure and 2500 P.S.I. bursting pressure.

“TEE” TYPE CONNECTOR - ORDER SEPARATELY

P/NSIZE CONN. (in.) DIMENSIONS (in.)

WEIGHT(lbs)INTERNAL EXTERNAL

OVERALLHEIGHT

OVERALLLENGTH

CENTERTO TOP

CAP.HEX.

5/5″ ODS x 7/8″ ODM 2-5/16 3-9/16 1-3/8 1-1/4 1 850005

FILTER-CARTRIDGE - ORDER SEPARATELY RECOMMENDED TONNAGE BASED ON BOTH DRYING

AND FLOW CAPACITY

CAPACITY RATINGS ACCORING TOA.R.I. STANDARD 710

P/NSIZE CONN.

(in.)

COREFILTER AREA(sq in.)

DIMENSIONS (in.)

WT.(lbs)

DROPS OF WATERFLOW CAPACITY @2 PSI IN

TONSDESICCANTCUBIC

VOLUME

SHELLDIA.

OVER-ALL

LENGTH

REFRIGERANTS R-134a R-22 R-404A/R-507

R-134a R-22 R-404AA/R-507

LIQUID LINE TEMP °F

75 125 75 125 75 125 R-134a R-22 R-404A/R-507

1 7/16-18 43 15.6 2-1/2 8-3/4 2-1/2 10 12.5 7.5 600 370 395 303 410 310 11.4 14.4 10.0 815030

P368

“TEE” TYPECONNECTOR

679

FILTER DRIERS

SPORLAN CATCH-ALL SEALED TYPEThe universal acceptance of the Catch-All Filter Drier is due to its unique molded porous core, consisting of a blend of highly effective desiccants. The quality features built into it assure years of service on any refrigeration system.

MOISTURE — The Catch-All Filter Drier removes moisture from the refrigerant by adsorbing and retaining it deep within the desic-cant granules. The CW line of Catch-Alls is designed for use with polyolester oils and features approximately twice the water capac-ity of a standard Catch-All.FOREIGN MATTER — The Catch-All Filter Drier will filter out scale, solder particles, carbon, sludge, dirt, or any other foreign matter with negligible pressure drop. Fine particles that would go through an ordinary strainer are removed down to a minimum size in one pass filtration. The large filtering area of the Catch-All Fil-ter Drier core permits it to collect a large amount of dirt without plug up.

ACID — The Catch-All Filter Drier is unexcelled in acid removal ability. The hydrochloric, hydrofluoric, and various organic acids are adsorbed and held by the desiccant in a manner similar to the adsorption of moisture. Tests have demonstrated that the Catch-All Filter Drier will remove over 10 times as much acid as the desiccant used in most driers. This ability, along with its

excellent ability to clean up the oil, is responsible for the excellent field performance in cleaning up severely contaminated systems.

OIL SLUDGE AND VARNISH — Even the best refrigeration oils break down to produce varnish, sludge, and organic acids. Only the Catch-All Filter Drier is capable of removing these products of oil decomposition.

SPECIAL APPLICATIONS — A special “HH” core Catch-AllFilter Drier is available to remove wax which frequently causes difficulty on low temperature Refrigerant 22 and 502 systems. For cap tube systems, use the C-032-CAP or CW-032-CAP Catch-All which has fittings suitable for attaching to any size capillary tube.

Remember…It’s not how much moisture you remove from a refrigeration system that counts, it’s how little moisture is left.

SEALED TYPE – Liquid Line and Suction Linefor Refrigerants R-12, R-22, R-134a, R-404A, R-407C, R-502, R-507

Also Compatible with Refrigerants R-123, R-124, R-125, R-401A & B, R-402A & B, R-408A, R-409ASPECIFICATIONS

Listed by Underwriters Laboratories Inc. – Guide SMGT-File No. SA-1756A& B and Canadian Standards Association – File LR-19953. Maximum Rated Pressure of 500 psi, except for the type C-140 Series which has a maximum pressure of 450 psi.

“C” SERIESLIQUID LINE TYPE

“CW” SERIESLIQUID LINE TYPE

SUCTION LINETYPE CONNECTION

SIZE (in.)

VOLUME OFDESICCANT

(cu in.)

OVERALLLENGTH (in.)

SOLDERSOCKET

DEPTH (in.)

DIAMETERof BODY

(in.)SAE Flare ODF Solder SAE Flare ODF Solder ODF Solder SAE Flare ODF SolderC-032 C-032-S CW-032 CW-032-S — 1/4

3

4.19 3.81 0.38

1.75

— C-032-CAP — CW-032-CAP — Extended 1/4 Male — 5.81 —C-032-CAP-T CW-032-CAP-T

C-032-F — CW-032-F — —1/4 Male – Inlet

1/4 Female – Outlet 3.81 — —

C-032-FM — CW-032-FM — —1/4 Female – Inlet1/4 Male – Outlet

3.81 — —

C-033 C-033-S CW-033 CW-033-S — 3/8 4.69 3.88 0.44C-052 C-052-S CW-052 CW-052-S

—1/4

54.75 4.19 0.38

2.44— C-0525-S — CW-0525-S 5/16 — 4.38 0.44C-053 C-053-S CW-053 CW-053-S 3/8 5.19 4.31 0.44C-082 C-082-S CW-082 CW-082-S — 1/4

9

5.62 5.12 0.38

2.62— C-0825-S — CW-0825-S — 5/16 — 5.31 0.44C-083 C-083-S CW-083 CW-083-S — 3/8 6.06 5.25 0.44C-084 C-084-S CW-084 CW-084-S C-084-S-T-HH 1/2 6.31 5.44 0.50C-162 C-162-S CW-162 CW-162-S — 1/4

16

6.25 5.75 0.38

3.00

— C-1625-S — CW-1625-S — 5/16 — 5.94 0.44C-163 C-163-S CW-163 CW-163-S — 3/8 6.75 5.88 0.44C-164 C-164-S CW-164 CW-164-S C-164-S-T-HH 1/2 6.94 6.00 0.50C-165 C-165-S CW-165 CW-165-S C-165-S-T-HH 5/8 7.25 6.31 0.62

— — — — C-166-S-T-HH 3/4 — 6.75 0.62— C-167-S — CW-167-S C-167-S-T-HH 7/8 — 6.93 0.75

C-303 C-303-S CW-303 CW-303-S — 3/8

30

9.69 8.88 0.44

3.00

C-304 C-304-S CW-304 CW-304-S — 1/2 9.88 9.00 0.50C-305 C-305-S CW-305 CW-305-S C-305-S-T-HH 5/8 10.19 9.25 0.62

— C-306-S — CW-306-S C-306-S-T-HH 3/4 — 9.65 0.62— C-307-S — CW-307-S C-307-S-T-HH 7/8 — 9.80 0.75— C-309-S — CW-309-S C-309-S-T-HH 1-1/8 — 9.75 0.96

C-413 — CW-413 — — 3/8

41

9.56 — —

3.50C-414 C-414-S CW-414 CW-414-S — 1/2 9.94 9.05 0.50C-415 C-415-S CW-415 CW-415-S — 5/8 10.25 9.35 0.62

— C-417-S — CW-417-S C-417-S-T-HH 7/8 — 9.81 0.75— C-419-S — CW-419-S C-419-S-T-HH 1-1/8 — 9.75 0.90

— — — —

C-437-S-T-HH 7/8

48 —

10.34 0.75

4.75C-439-S-T-HH 1-1/8 10.62 0.94C-4311-S-T-HH 1-3/8 10.94 1.00C-4313-S-T-HH 1-5/8 10.94 1.06

— C-607-S — CW-607-S C-607-S-T-HH 7/8 60 — 16.00 0.75 3.00C-609-S CW-609-S C-609-S-T-HH 1-1/8 16.00 0.90

COMPACT STYLE ➡

C-144-S-TT-HH 1/2

14 —

4.14 0.50

4.44C-145-S-TT-HH 5/8 4.38 0.66C-146-S-TT-HH 3/4 4.83 0.66C-147-S-TT-HH 7/8 4.97 0.75C-149-S-TT-HH 1-1/8 4.93 0.96

P4164

680

FILTER DRIERS

SPORLAN CATCH-ALL REPLACEABLE CORE TYPEREPLACEABLE CORE TYPE – Liquid Line Application

ODF Solder Connections – Refrigerants R-12, R-22, R-134a, R-404A, R-407C, R-502, R-507Also Compatible with Refrigerants R-123, R-124, R-125, R-401A & B, R-402A & B, R-408A, R-409A

Listed by Underwriters’ Laboratories Inc. — Guide-SMGT-File No. SA-1756A& B and Canadian Standards Associ-ation — File LR-19953.

Maximum rated pressure of 500 psi, except for the Type C-R240 Series which has a maximum rated pressure of 400 psi. Type numbers with G suffix indicate that unit is supplied with 1/49 female pipe connection in the end plate and pipe plug…For liquid line service an angle charging valve for system charging purposes can be installed in place of the pipe plug…Angle charging and Schrader type access valves are available from your SporlanWholesaler.

Type numbers with P suffix indicates female threaded pipe connections.

AMMONIA CATCH-ALL FILTERS prolong the life of ammonia systems by using the Catch-All to effectively remove scale and other solid contaminants. Select a model from those listed above with female pipe connections.

NOTE: Do not use RPE-48-BD and RPE-100 Filter Elements on Ammonia Systems.

TYPECONNECTIONS

(in.)ODF Solder

NO. OFCORES

COREPART NO.

VOLUME OFDESICCANT

(cu in.)

MOUNTINGBRACKET

S

OVERALLLENGTH

(in.)C-R425 5/8

1RCW-42

orRC-4267

42 A-175-19.06

C-R427 7/8 9.44C-485 5/8 9.15

C-485-G 5/8

1

RCW-48,RC-4864,

orRC-4864-HH

48 A-685

9.15C-487 7/8 9.30C-487-G 7/8 9.30C-489-G 1-1/8 9.50C-4811-G 1-3/8 9.60C-4813-G 1-5/8 9.60C-967 7/8

2 96 A-685

14.84C-967-G 7/8 14.84C-969 1-1/8 15.04C-969-G 1-1/8 15.04C-9611-G 1-3/8 15.14C-9613-G 1-5/8 15.14C-1449 1-1/8

3 144 A-685

20.58C-1449-G 1-1/8 20.58C-14411 1-3/8 20.68C-14411-G 1-3/8 20.68C-14413-G 1-5/8 20.68C-19211 1-3/8

4 192 A-685

26.22C-19211-G 1-3/8 26.22C-19213 1-5/8 26.22C-19213-G 1-5/8 26.22C-19217-G 2-1/8 26.22C-30013 1-5/8

3

RCW-100,RC-10098,

orRC-10098-HH

300 A-175-227.94

C-30013-G 1-5/8 27.94C-30017-G 2-1/8 28.06C-40017 2-1/8

4 400 A-175-2

34.56C-40017-G 2-1/8 34.56C-40021-G 2-5/8 34.75C-40025-G 3-1/8 34.44C-40029-G 3-5/8 34.81C-40033-G 4-1/8 35.12

NPT PIPE CONNECTIONSC-484-P 1/2 1 RCW-48,

RC-4864, orRC-4864-HH

48

A-685

9.08C-966-P 3/4 2 96 14.67C-1448-P 1 3 144 20.42C-19212-P 1-1/2 4 192 25.85

C-40016-P 2 4RCW-100,

RC-10098, orRC-10098-HH

400 A-175-2 34.44

P4165

P4166

681

FILTER DRIERS

SPORLAN CATCH-ALL FILTER DRIERS

20Based on 86° F Liquid Temperature and a Refrigerant Flow of 4.0 pounds per minute per ton of Refrigerant 12; 3.1 pounds per minute per ton of Refrigerant 134a; 2.9 pounds per minute per ton for Refrigerant 22; 3.9 pounds per minute per ton for Refrigerant 404A; 4.4 pounds per minute per ton for Refrigerant 502; and 4.1 pounds per minute per ton for Refrigerant 507. Ratings in accordance to ARI Standard 710.

2120 drops = 1 gram = 1 cc.

22The filtration area is equal to the core surface area plus the large internal surface available for depth filtration.

NOTE: The variation in flow ratings of filter driers having the same size core and shell is caused by the difference in connection sizes used. For complete capacity and selection information see your Sporlan Wholesaler or write Sporlan Valve Company for Bulletin 40-10.

*As of this printing, ARI has not established an EPD for R-134a, R-404A and R-507.

LIQUID LINE RATINGS AND SELECTION RECOMMENDATIONSRefrigerants R-12, R-22, R-134a, R-404A, R-502, R-507

TYPE

SU

RFA

CE

FIL

TE

RIN

GA

RE

A (

sq f

t)22

RATINGS AT ARI STANDARD CONDITIONS21 SELECTION RECOMMENDATIONS (Tons)

Water Capacity — Drops

Refrigerant Flow CapacityTons at 2 psi20

Refrigeration Air Conditioning

R-1215 PPM

R-134a*80 PPM

R-2260 PPM

R-404A/507*50 PPM

R-50230 PPM

Commercial & LowTemperature Equipment

Field Replacement

or Field Built UpSystems

75° F 125° F 75° F 125° F 75° F 125° F 75° F 125° F 75° F 125° F 12 134a 22 404A/507 50212 &134a 22

404A,502, &

507

12 &134a 22

SEALED TYPEC-032

9 39 33 33 28 26 22 31 23 v28 v221.6 2.1 2.1 1.5 1.4

1/4 1/4 1/4 1/2 1/2

C-032-CAPC-032-SC-032-F

C-032-FMC-033 3.8 5.0 4.9 3.7 3.2C-033-S 4.2 5.5 5.4 4.0 3.5

C-052

15 85 74 69 58 57 48 64 48 57 52

2.3 3.0 2.9 2.2 1.9 1/3 1/3 1/3 3/4 3/4C-052SC-0525-S 3.2 4.1 4.1 2.8 2.6 1/3 1/3 1/3 1 1-1/2C-053 4.6 6.1 6.0 4.4 3.9

1/3 1/3 1/3 1 2C-053-S 5.3 6.9 6.7 5.0 4.4C-082

21 133 115 114 96 90 75 106 80 94 73

2.3 3.0 2.9 2.2 1.9 1/2 1/2 1/2 3/4 1C-082-S

C-0825-S 3.3 4.3 4.3 3.1 2.9 3/4 3/4 3/4 1-1/2 1-1/2C-083 4.9 6.5 6.3 4.8 4.1

1 1 1 2 2C-083-S 5.8 7.6 7.4 5.6 4.8

C-084 9.1 12.1 12.1 8.3 7.81-1/2 1-1/2 1 2 2

C-084-S 10.4 13.7 13.4 10.1 8.7C-162

33 244 181 194 167 144 140 195 130 167 144

2.3 3.0 2.9 2.2 1.91 1-1/2 3/4 1 1-1/2

C-1625-S 3.3 4.3 4.3 3.1 2.9

C-163 4.9 6.5 6.3 4.8 4.12 2 2 3 3

C-163-S 5.8 7.6 7.4 5.6 4.8C-164 10.9 14.3 14.0 10.6 9.1

2 3 2 3 5C-164-S 12.0 18.7 15.4 11.6 10.0C-165 14.8 19.5 19.1 14.4 12.4

2 3 2 5 5C-165-S 16.9 22.3 21.8 16.5 14.2C-303

53 465 401 360 288 310 260 350 263 270 254

5.0 6.6 6.5 4.8 4.2 3 3 2 3 4

C-304 10.9 14.3 14.0 10.6 9.13 5 3 5 7-1/2

C-304-S 12.0 15.7 15.4 11.6 10.0C-305 16.0 21.0 20.6 15.5 13.4

4 5 5 7-1/2 7-1/2C-305-S 18.2 23.9 23.4 17.6 15.2C-307-S 23.4 30.7 30.1 22.7 19.5 5 5 5 7-1/2 10C-414

67 605 525 460 368 404 338 447 336 355 332

12.5 16.5 16.1 12.1 10.55 5 5 5 7-1/2

C-414-S 13.6 17.9 17.5 13.1 11.4C-415 17.0 22.4 21.9 16.5 14.2

7-1/2 7-1/2 7-1/2 7-1/2 10C-415-S 18.6 24.5 24.0 18.2 15.6C-417-S 23.8 31.3 30.7 23.1 19.9 10 10 7-1/2 10 10

C-419-S 26.0 34.2 33.5 25.3 21.7 10 12 10 12 15C-607-S

106 930 802 720 576 618 518 700 526 541 50730.7 40.5 39.7 30.0 25.8

15 15 10 15 20C-609-S 34.6 45.7 44.8 34.0 29.1

REPLACEABLE CORE TYPE WITH STANDARD CORESC-R424

67 566 490 460 368 367 288 447 336 325 28112.4 14.9 16.0 12.0 10.4 3 5 5 5 5

C-R425 15.2 18.3 20.0 15.0 12.7 5 7-1/2 5 7-1/2 10C-R427 19.6 23.6 25.0 19.0 16.4 5 7-1/2 5 7-1/2 10

C-48564 512 443 440 368 347 288 408 309 363 282

15.2 18.4 20.0 15.0 12.8 7-1/2 10 7-1/2 7-1/2 10C-487 25.5 30.7 33.0 25.0 21.4 12 15 10 12 15C-489-G 46.1 55.5 60.0 45.0 38.6 12 15 10 15 20

C-967128 1024 886 880 736 694 576 816 618 726 564

41.8 60.4 54.0 41.0 35.0 20 25 15 20 25C-969 51.9 62.5 67.0 50.0 43.5 25 35 25 25 35C-1449

192 1536 1329 1320 1104 1041 864 1224 927 1089 84662.5 75.4 81.0 61.0 52.4 30 40 30 30 40

C-14411 72.1 86.8 93.0 70.0 60.4 40 50 35 40 50C-19211

256 2048 1772 1760 1472 1388 1152 1632 1236 1452 112891.6 110 118 89.0 76.6 50 70 50 50 70

C-19213 106 127 136 103 88.6 60 80 55 60 80C-19217-G 111 134 143 108 92.9 65 85 60 65 85

C-30013 294 4500 2139 4509 3468 2670 1878 2631 1992 2610 1770 120 145 155 117 101 75 100 70 75 100C-40017 392 6000 2852 6012 4624 3560 2504 3508 2656 3480 2360 155 186 200 150 130 110 130 100 110 130

682

FILTER DRIERS

SPORLAN CATCH-ALL CW SERIESNEW REFRIGERANTS,NEW OILS,NEW CHALLENGESSpecially designed to be effective with today’s new refrigerants, the CW Series averages twice the moisture capacity of a standard Catch-All Filter Drier and provides the proven contaminant removal qualities you expect from Sporlan.

MOISTURENew refrigerants and synthetic oils have forced users to re-evaluate the way in which they protect systems. The synthetic polyolester oils, also known as POE oils, have hydroscopic tendencies that readily attract and absorb moisture.

The CW Series is compatible with the traditional refrigerants, R-12, R-22 and R-502, and can be used for severe moisture problems.

ACID REMOVAL AND OIL CLEANUPWith the CW Series, you get a filter drier that not only adsorbs and holds moisture, but also handles acid and oil cleanup.

FILTRATIONThe design and strength of the CW core has not been compromised. The desiccant composition produces a filter of the same quality stan-dards expected from Sporlan.

A CORE TO MEET EVERY NEEDSporlan’s standard Catch-All core remains unsurpassed in its acid removal and oil cleanup ability.

A SPECIALIZED SOLUTIONSpecially designed for new refrigerants and oils, the CW Series core also fully meets compressor manufacturers’ stated requirements for alumina content.

P4164

P4165

683

FILTER DRIERS

SPORLAN CATCH-ALL CW SERIESLIQUID LINE RATINGS AND SELECTION RECOMMENDATIONS

Refrigerants R-12, R-22, R134a, R-404A, R-407C, R-507

TYPE

SU

RFA

CE

FIL

TE

RIN

GA

RE

A (

sq f

t)22

RATINGS AT ARI STANDARD CONDITIONS21 SELECTION RECOMMENDATIONS (Tons)

Water Capacity — DropsRefrigerant Flow Capacity

Tons at 2 psi20

Refrigeration Air Conditioning

R-22215 PPM

R-134a*80 PPM

R-404A/50750 PPM

R-407C50 PPM

Commercial & LowTemperature Equipment

Field Replacementor Field Built Up

Systems

75° F 125° F 75° F 125° F 75° F 125° F 75° F 125° F 22 134a 404A/507 502 22 134a 404A/507 22 & 407C 134a

SEALED TYPECW-032

9 59 48 64 57 70 47 52 342.1 2.1 1.5 2.0

1/4 1/4 1/4 1/2 1/2

CW-032-CAP

CW-032-SCW-032-FCW-032-FMCW-033 4.9 5.0 3.7 4.7

CW-033-S 5.4 5.5 4.0 5.1CW-052

15 122 102 134 118 145 98 108 70

2.9 3.0 2.2 2.8

1/3 1/3 1/3

3/4 3/4CW-052S

CW-0525-S 4.1 4.1 2.8 4.2 1-1/21CW-053 6.0 6.1 4.4 5.6

2CW-053-S 6.7 6.9 5.0 6.4

CW-082

21 203 169 222 196 241 163 179 116

2.9 3.0 2.2 2.8 1/2 1/2 1/2 1 3/4CW-082-SCW-0825-S 4.3 4.3 3.1 4.4 3/4 3/4 3/4 1-1/2 1-1/2CW-083 6.3 6.5 4.8 6.0

1 1 1 2 2CW-083-S 7.4 7.6 5.6 7.0CW-084 12.1 12.1 8.3 11.8

1-1/2 1-1/2 1 2 2CW-084-S 13.4 13.7 10.1 12.7

CW-162

33 305 255 335 295 363 245 270 175

2.9 3.0 2.2 2.81-1/2 1 3/4 1-1/2 1

CW-1625-S 4.3 4.3 3.1 4.4CW-163 6.3 6.5 4.8 6.0

2 2 2 3 3CW-163-S 7.4 7.6 5.6 7.0

CW-164 14.0 14.3 10.6 13.33 2 2 5 3

CW-164-S 15.4 15.7 11.6 14.6CW-165 19.1 19.5 14.4 18.2

3 2 2 5 5CW-165-S 21.8 22.3 16.5 20.8CW-303

53 669 559 734 647 795 537 592 384

6.5 6.6 4.8 6.1 3 3 2 4 3CW-304 14.0 14.3 10.6 13.3

5 3 3 7-1/2 5CW-304-S 15.4 15.7 11.6 14.6CW-305 20.6 21.0 15.5 19.6

5 4 5 7-1/2 7-1/2CW-305-S 23.4 23.9 17.6 22.2CW-307-S 30.1 30.7 22.7 28.6 5 5 5 10 7-1/2

CW-414

67 854 714 938 826 1015 686 756 490

16.1 16.5 12.1 15.35 5 5 7-1/2 5

CW-414-S 17.5 17.9 13.1 16.6CW-415 21.9 22.4 16.5 20.8

7-1/2 7-1/2 7-1/2 10 7-1/2CW-415-S 24.0 24.5 18.2 22.9CW-417-S 30.7 31.3 23.1 29.2 10

107-1/2 10 10

CW-419-S 33.5 34.2 25.3 31.9 12 10 15 12CW-607-S

106 1338 1118 1468 1294 1590 1074 1184 76839.7 40.5 30.0 37.8

15 15 10 20 15CW-609-S 34.6 45.7 34.0 29.1

REPLACEABLE CORE TYPE WITH STANDARD CORESC-R424

67 854 714 938 826 1015 686 756 490

16.0 14.9 12.0 15.0 5 3 5 5 5

C-R425 20.0 18.3 15.0 19.07-1/2 5 5 10 7-1/2

C-R427 25.0 23.6 19.0 24.0C-485

64 988 826 1085 956 1175 794 875 567

20.0 18.4 15.0 19.0 10 7-1/2 7-1/2 10 7-1/2

C-487 33.0 30.7 25.0 31.015 12

10 15 12C-489-G 60.0 55.5 45.0 57.0 10 20 15C-967

128 1976 1652 2170 1912 2350 1588 1750 113454.0 50.4 41.0 51.0 25 20 15 25 20

C-969 67.0 62.5 50.0 64.0 35 25 25 35 25

C-1449192 2964 2478 3255 2868 3525 2382 2625 1701

81.0 75.4 61.0 77.0 40 30 30 40 30C-14411 93.0 86.4 70.0 88.0 50 40 35 50 40C-19211

256 3952 3304 4340 3824 4700 3176 3500 2268

118 110 89.0 112 70 50 50 70 50

C-19213 136 127 103 130 80 60 55 80 60C-19217-G 143 134 108 136 85 65 60 85 65C-30013 294 6295 5263 6915 6090 7482 5058 5573 3612 155 145 117 147 100 75 70 100 75C-40017 392 8394 7018 9220 8120 9976 6744 7430 4816 200 186 150 190 130 110 100 130 110

20Based on 86° F Liquid Temperature and a Refrigerant Flow of 3.1 pounds per minute per ton of Refrigerant 134a; 2.9 pounds per minute per ton of Refrigerant 22; 3.9 pounds per minute per ton for Refrigerant 404A; 2.9 pounds per minute per ton for Refrigerant 407C; 4.1 pounds per minute per ton for Refrigerant 507. Ratings in accordance to ARI Standard 710.

2120 drops = 1 gram = 1 cc.

22The filtration area is equal to the core surface area plus the large internal surface available for depth filtration.

NOTE: The variation in flow ratings of filter driers having the same size core and shell is caused by the difference in connection sizes used. For complete capacity and selection information see your Sporlan Wholesaler or write Sporlan Valve Company for Bulletin 40-10.

*As of this printing, ARI has not established an EPD for R-134a, R-404A, R-407C and R-507.

684

FILTER DRIERS

SPORLAN CATCH-ALL SUCTION LINE FILTER DRIER RECOMMENDATIONSFOR CLEAN-UP AFTER BURNOUT AND NEW SYSTEMS

TYPE NUMBERCONNECTIONS

(in.)ODF Solder

NUMBEROF

CORES

COREPART

NUMBER

LENGTH(in.)

SOLDERSOCKETDEPTH

(in.)

WIDTH(in.)

SYSTEM CAPACITY IN HORSEPOWER

Refrigerant 22 & 407C Refrigerant12, 134a, 404A, 502 & 507

PermanentInstallationwith Cores

TemporaryInstallationCores for Cleanup;

Filter Elementsafter Cleanup

PermanentInstallationwith cores

TemporaryInstallationCores forCleanup;

Filter Elementsafter Cleanup

SE

ALE

D T

YP

E

C-084-S-T-HH 1/2

SealedTypeFilterDriers

SealedTypeFilterDriers

5.44 0.50 2.62 1

Selectthese

types onbasis of

permanentinstallation

1/2

Selectthese

types onbasis of

permanentinstallation

C-164-S-T-HH 1/2 6.00 0.50

3.002 1C-165-S-T-HH 5/8 6.31 0.62

C-166-S-T-HH 3/4 6.75 0.62C-167-S-T-HH 7/8 6.93 0.75

32

C-305-S-T-HH 5/8 9.25 0.62

3.00C-306-S-T-HH 3/4 9.65 0.62C-307-S-T-HH 7/8 9.80 0.75

5C-309-S-T-HH 1-1/8 9.75 0.96

3C-417-S-T-HH 7/8 9.81 0.753.50

C-419-S-T-HH 1-1/8 9.75 0.967-1/2C-437-S-T-HH 7/8 10.34 0.75

4.754

C-439-S-T-HH 1-1/8 10.74 0.96C-4311-S-T-HH 1-3/8 10.94 1.00

10 5C-4313-S-T-HH 1-5/8 10.94 1.06

C-607-S-T-HH 7/8 16.00 0.753.00 5 3

C-609-S-T-HH 1-1/8 16.00 0.96

SE

ALE

D T

YP

EC

OM

PAC

T S

TY

LE C-144-S-TT-HH 1/2 4.14 0.50

4.44

2 1

C-145-S-TT-HH 5/8 4.38 0.623 2

C-146-S-TT-HH 3/4 4.83 0.69

C-147-S-TT-HH 7/8 4.97 0.755 3

C-149-S-TT-HH 1-1/8 4.93 0.96

RE

PLA

CE

AB

LEC

OR

E T

YP

E

C-30013-G 1-5/83

RC-10098-HHor

RC-10098

See Page 25 orBulletin 40-10

25 50 15 25C-30017-G 2-1/8C-40017-G 2-1/8

4

C-40021-G 2-5/8

30 60 20 30C-40025-G 3-1/8C-40029-G 3-5/8C-40033-G 4-1/8

CATCH-ALL SUCTION LINE FILTER DRIER SELECTION INSTRUCTIONS

Selection of the proper Catch-All Suction Line Filter Drier will depend upon the intended usage. Either the “Permanent Installa-tion with Cores” or “Temporary Installation Cores for Cleanup; Fil-ter Elements after Cleanup” column may be used. When the best possible system protection is desired, the “Permanent with Cores” column should be used for selection. These recommen-dations are made on the basis of a low pressure drop, and as a result the cores can be left in the shell for maximum drying and acid removal when the system returns to normal operation deliv-ering its full rated capacity.

An alternate selection that is satisfactory and less expensive is to install cores temporarily for cleanup, and then remove these cores and install filter elements after cleanup. Because of the

larger system capacity, the pressure drop through the temporarily installed cores will be somewhat larger than normal, but still within the limits specified in the table on the previous page. After the cleanup is complete, the use of filter elements will assure a minimum pressure drop when the system is in normal operation. The low pressure drop through the filter elements assures maxi-mum energy savings during normal operation. Cleanup of the system can be accomplished with either the standard core (RC-10098) or the charcoal core (RC-10098-HH).

For complete description of the suggested system cleanup pro-cedure, request Bulletin 40-10.

685

FILTER DRIERS

SPORLAN CATCH-ALL SUCTION LINE FILTER DRIER RECOMMENDATIONSSIGNIFICANCE OF THE TYPE NUMBER

The letters and numerals in the Catch-All type number each have a significance. The “C” indicates Catch-All, and “CW” indicates the High Water Capacity Catch-All. The FIRST TWO OR THREE DIGITS indicate cubic inches of desiccant. The LAST ONE OR TWO DIGITS indicate fitting size in eighths. For sealed models, a “-S” following the last digit indicates solder fittings, and NO LETTER indicates a flare fitting. Replaceable core models (C-420 and larger) only have solder connections and the “-S” is omitted. Examples are: C-083 is 8 cu. in. and 3/89 flare, C-309-S is 30 cu. in. and 1-1/89 solder, C-19213 is 192 cu. in. and 1-5/89 solder.

Other suffix letters indicate special qualities. For example:“-T” indicates a pressure tap consisting of a Schrader type

access valve on the inlet end of the Catch-All.“-HH” indicates a charcoal style core for wax removal and cleanup

after a hermetic motor burnout.“-F” indicates a female flare outlet fitting with a male flare inlet

fitting.“-FM” indicates a female flare inlet fitting with a male flare outlet

fitting.“-CAP” indicates a Catch-All particularly designed for installation

on capillary tube systems.

REPLACEABLE CORES AND PLEATED FILTER ELEMENTS — ORDER SEPARATELYCores for replaceable core type filter driers are molded of exactly the same desiccants that are used in the popular sealed filter driers.Cores are individually packed in metal cans, fully activated, and her-metically sealed against moisture and dirt.Filter Elements are dried and packed in individual sealed metal cans. This method of packaging prevents the element from picking up moisture from the atmosphere.The method of mounting the cores or filter elements on the end plate by means of tie rods makes them very easy to install and remove. Detailed instructions are printed on each can. Each can contains a “triple gasket” consisting of a new end plate gasket, an end plate gasket for certain competitive filter driers, and a core gasket where desired. See the specifications on Page 23 for the number of cores required for each type drier.RC-4267 — Activated Core — Order as separate item — Fits ONLY shell types C-R424, C-R425, and C-R427.RCW-42 — High Water Capacity Core — Order as separate item — Fits ONLY shell types C-R424, C-R425, and C-R427. Designed spe-cially for use with POE oils. This core should be used on systems that have a ruptured water cooled condenser, or that have been exposed to the atmosphere, or for some reason have a high amount of moisture in the system.RC-4864 — Activated Core — Order as separate item — Fits types C-480 thru C-19200 Series Shells. This is the standard core suitable for most installations in the liquid or suction line.RCW-48 — High Water Capacity Core — Order as separate item — Fits types C-480 thru C-19200 Series Shells. Designed specially for use with POE oils. This core should be used on systems that have a ruptured water cooled condenser, or that have been exposed to the atmosphere, or for some reason have a high amount ofmoisture in the system.

RC-4864-HH — Activated Charcoal Core — Order as separate item — Fits types C-480 thru C-19200 Series Shells. This core should be used for wax removal on low temperature R-22 and R-502 systems, and for cleanup of systems that have had a hermetic motor burnout.RPE-48-BD — Filter Element — Order as a separate item — Fits types C-480 thru C-19200 Series Shells and Replaceable Suction Filter (RSF) Shells. This element should be used in RSF shells installed in the suction line to obtain the lowest possible pressure drop. In cleaning up a system after a hermetic motor burnout, cores should be used first. Then after the system is thoroughly clean, this filter element can be installed in the RSF shell.RC-10098 — Activated Core — Order as separate item — Fits types C-30,000 and C-40,000 Series Shells. This core has a high water capacity and should be used on all standard liquid and suction line applications.RCW-100 — High Water Capacity Core — Order as separate item — Fits types C-30,000 and C-40,000 Series Shells. Designed spe-cially for use with POE oils. This core should be used on systems that have a ruptured water cooled condenser, or that have been exposed to the atmosphere, or for some reason have a high amount of moisture in the system.RC-10098-HH — Activated Charcoal Core — Order as separate item — Fits types C-30,000 and C-40,000 Series Shells. This core should be used for wax removal on low temperature R-22 and R-502 sys-tems, and for cleanup of systems that have had a hermetic motor burnout.RPE-100 — Filter Element — Order as a separate item — Fits types C-30,000 and C-40,000 Series Shells. This filter element should be used in the same way as the RPE-48-BD installed in the RSF shell.

HH STYLE CATCH-ALL FOR WAX REMOVALU.S. PATENT NUMBER 3,407,617

Small amounts of wax are often a problem on low temperature Refrigerant-22 and Refrigerant-502 systems. Even well engi-neered systems frequently contain minute quantities of wax which are sufficient to clog expansion valve screens or cause sticking of the valve. Sporlan has developed a special blend of desiccants including activated charcoal which removes small amounts of wax in the liquid line before this wax can cause trouble at the expansion valve. These Catch-All Filter Driers have been very successful in correcting trouble jobs in the field.By installing HH Style Catch-All Filter Driers in the liquid line of all low temperature Refrigerant-22 and Refrigerant-502 systems these wax problems can be entirely prevented. In addition to their wax removal ability, these filter driers will remove all of the other harmful contami-nants that the standard filter driers remove.The following Catch-All Filter Driers are available with the HH core to meet the needs of low temperature systems. For dimensions, refer to the specifications for standard filter driers or consult Bulletin 40-10.

TYPECONNECTIONS

(in.)TYPE

CONNECTIONS(in.)

C-052-HH 1/4 SAE Flare C-303-HH 3/8 SAE FlareC-082-HH 1/4 SAE Flare C-304-HH 1/2 SAE FlareC-083-HH 3/8 SAE Flare C-304-S-HH 1/2 ODF SolderC-162-HH 1/4 SAE Flare C-305-HH 5/8 SAE FlareC-163-HH 3/8 SAE Flare C-305-S-HH 5/8 ODF SolderC-163-S-HH 3/8 ODF Solder C-414-HH 1/2 SAE FlareC-164-HH 1/2 SAE Flare C-415-HH 5/8 SAE FlareC-164-S-HH 1/2 ODF Solder C-417-S-HH 7/8 ODF SolderC-165-HH 5/8 SAE Flare RC-4864-HH Replaceable CoreC-165-S-HH 5/8 ODF Solder RC-10098-HH

686

FILTER DRIERS

PARKER STEEL LIQUID LINE FILTER DRYERS (LLD Series)Key Features and Benefits

• High moisture and acid capacity. Maximum filtration capacity.

• Exceptional compatibility with new polyolester oils.

• Compatible with all existing and new refrigerants and blends including 134a, 401A/B, 402A/B, 404A, 407A/B/C, 410A, 502, 507A.

• Spring loaded 100% molecular sieve. For 410A, Parker rec-ommends XH11 (consult Parker).

• Solid copper sweat fittings.

• Powder paint exterior coating surpasses 500 hour ASTM salt spray test and resists corrosion.

• Eliminates concern of additive stripping.

• 032 MF liquid line dryer features 1/4″ SAE steel flare male inlet and 1/4″ SAE steel female flare outlet. Consult Parker for other sizes.

• 500 psig design pressure (600 psig available on all models designed for R-410A applications with XH11 desiccant.

• Extended copper ends available (select models).

• Available with other desiccant combinations including char-coal and activated alumina (consult Parker).

• Various inlet/outlet fitting combinations available.

• U.L. listed SA3441, CSA certified LR46423.

NOTE: For R-410A applications, Parker recommends XH11 desiccant. See pages 9-11 for R-410A dryerinformation.

P4112

Steel Liquid Line Dryers — Water Drop Capacity at ARI Conditions

*See Parker RAC-1 catalog pages 9-11 for R-410A specific dryers and applications.

Refrigerant Holding Capacities for Steel Liquid Line Dryers(in oz. of refrigerant @ 100° F)

ModelSeries

R-12(15 ppm)

75° F/125° F

R-22(60 ppm)

75° F/125° F

R-134a(150 ppm)

75° F/125° F

R-401A/B(60 ppm)

75° F/125° F

R-401C(60 ppm)

75° F/125° F

R-402A/B(60 ppm)

75° F/125° F

R-404A(50 ppm)

75° F/125° F

R-407A/B(50 ppm)

75° F/125° F

R-407C(50 ppm)

75° F/125° F

R-410A*(50 ppm)

75° F/125° F

R-502(30 ppm)

75° F/125° F

R-507A(50 ppm)

75° F/125° F030 79/76 71/66 78/74 76/69 74/68 77/70 78/73 51/46 55/49 42/37 73/68 78/73050 162/157 147/135 160/153 157/142 153/141 159/144 160/150 105/95 112/101 86/77 149/141 161/151

080 245/237 222/205 243/231 237/215 231/213 241/218 241/227 159/144 170/153 131/117 226/213 244/228160 476/461 430/398 471/448 461/418 448/413 467/423 468/441 309/280 330/297 254/226 438/413 473/443300 835/808 755/698 826/786 808/733 786/724 819/742 822/773 543/491 579/521 446/397 769/724 830/777410 1164/1127 1053/ 973 1151/1096 1127/1022 1096/1010 1142/1034 1145/1078 757/684 806/726 622/554 1071/1010 1158/1084750 1776/1720 1607/1485 1757/1673 1720/1560 1673/1541 1743/1579 1748/1645 1156/1044 1231/1109 949/846 1635/1541 1767/1654

ModelSeries R-12 R-22 R-134a R-401A/B R-401C R-402A R-402B R-404A R-407A R-407B R-407C R-410A R-502 R-507A

030 1.92 1.74 1.76 1.71 1.51 1.59 1.42 1.49 1.64 1.46 1.45 1.52 1.76 1.50050 5.60 5.07 5.13 4.99 4.39 4.62 4.31 4.35 4.78 4.44 4.38 4.42 5.12 4.35080 7.97 7.21 7.30 7.10 6.24 6.58 6.10 6.18 6.81 6.27 6.20 6.28 7.28 6.19160 8.87 8.02 8.12 7.89 6.94 7.31 6.28 6.88 7.57 6.46 6.38 6.99 8.10 6.89

300 26.73 24.17 24.47 23.79 20.92 22.04 20.43 20.73 22.82 21.01 20.75 21.07 24.42 20.77410 37.33 33.75 34.17 33.22 29.21 30.78 28.53 28.95 31.86 29.34 28.98 29.42 34.10 29.00750 71.32 64.48 65.29 63.47 55.81 58.81 55.62 55.31 60.88 57.20 56.49 56.21 65.15 55.41

687

FILTER DRIERS

PARKER STEEL LIQUID LINE FILTER DRYERS (LLD Series)

P4113

Steel Liquid Line Dryer Dimensions

Part No.Model

No.

Connections SystemCutout

Length (C)

Diameter(D) (in.)

OverallLength

(in.)Part No.

ModelNo.

SAEFlare (A)

System CutoutLength (B)

(in.)

Diameter(C) (in.)I.D. (A) O.D. (B)

033000-0329 032S 1/4 3/8 2-9/16 1-11/16 3.77 033000-032 032 1/4 4-1/8 1-11/16032MF 1/4 3-29/32 1-11/16

033000-0529 052S 1/4 3/83-1/4

2-1/2 4.39 033000-052 052 1/4 4-3/4 2-1/2033000-0525 0525S 5/16 7/16 4.39033000-0539 053S 3/8 1/2 2-1/2 4.39 033000-053 053 3/8 5-3/16 2-1/2033000-0829 082S 1/4 3/8

4-1/8

2-1/2 5.27 033000-082 082 1/4 5- 5/8 2-1/2033000-0825 0825S 5/16 7/16 5.27033000-0839 083S 3/8 1/2 2-1/2 5.27 033000-083 083 3/8 6-1/16 2-1/2033000-0849 084S 1/2 5/8 2-1/2 5.41 033000-084 084 1/2 6-5/16 2-1/2033000-1629 162S 1/4 3/8

4-3/4

2-1/2 5.92 033000-162 162 1/4 6-5/16 2-1/2033000-1625 1625S 5/16 7/16 5.92033000-1639 163S 3/8 1/2 2-1/2 5.92 033000-163 163 3/8 6-3/4 2-1/2033070-1639 163S (R-410A)033000-1649 164S 1/2 5/8 2-1/2 6.06 033000-164 164 1/2 7 2-1/2033000-1659 165S 5/8 3/4 2-1/2 6.3 033000-165 165 5/8 7-1/4 2-1/2033000-3039 303S 3/8 1/2

7-3/4

3 8.86 033000-303 303 3/8 9-11/16 3033070-3039 303S (R-410A)033000-3049 304S 1/2 5/8 3 9 033000-304 304 1/2 9-15/16 3033000-3059 305S 5/8 3/4 3 9.24 033000-305 305 5/8 10-3/16 3033000-3079 307S 7/8 1 3 9.3 3033000-4149 414S 1/2 5/8

7-3/43-1/2 9.19 033000-413 413 3/8 9-7/8 3-1/2

033000-4159 415S 5/8 3/4 3-1/2 9.43 033000-414 414 1/2 10-1/8 3-1/2033000-4179 417S 7/8 1 3-1/2 9.49 033000-415 415 5/8 10-3/8 3-1/2033000-7569 756S 3/4 7/8

13-9/163-1/2 15.11

033000-7579 757S 7/8 1 3-1/2 15.11033000-7599 759S 1-1/8 1-1/4 3-1/2 15.99

688

FILTER DRIERS

PARKER STEEL LIQUID LINE FILTER DRYERS (LLD Series)Steel Liquid Line Dryers Flow Capacity(tons of refrigerant) at pressure drop 1 psi

*Specific models have been designed for use with R-410A. See Parker Catalog RAC-1 pages 9-11 for R-410A specific dryers and applications.

Part No.Model

No.FilterArea

R-12 R-22 R-134a R-401A R-401B R-401C R-402A R-402B R-404A R-407A R-407B R-407C R-410A* R-502 R-507A

033000-032 03210

1.27 1.70 1.54 1.74 1.75 1.55 1.14 1.34 1.10 1.48 1.19 1.64 1.67 1.11 1.10033000-0329 032S 1.41 1.84 1.72 1.93 1.95 1.72 1.27 1.48 1.22 1.65 1.32 1.82 1.86 1.23 1.23

032MF 1.27 1.70 1.54 1.74 1.75 1.55 1.14 1.34 1.10 1.48 1.19 1.64 1.67 1.11 1.10033000-052 052

17

1.41 1.84 1.72 1.93 1.95 1.72 1.27 1.48 1.22 1.65 1.32 1.82 1.86 1.23 1.23033000-0529 052S 1.48 2.05 1.80 2.03 2.04 1.80 1.34 1.56 1.29 1.73 1.39 1.91 1.95 1.29 1.29033000-0525 0525S 2.47 3.32 3.00 3.38 3.40 3.01 2.23 2.60 2.14 2.88 2.31 3.19 3.25 2.15 2.15033000-053 053 2.97 3.96 3.60 4.06 4.08 3.61 2.67 3.12 2.57 3.46 2.78 3.83 3.90 2.58 2.57

033000-0539 053S 3.54 4.74 4.29 4.83 4.86 4.30 3.18 3.71 3.06 4.12 3.31 4.56 4.64 3.07 3.06033000-082 082

27

1.41 1.84 1.72 1.93 1.95 1.72 1.27 1.48 1.22 1.65 1.32 1.82 1.86 1.23 1.23033000-0829 082S 1.56 2.12 1.89 2.13 2.14 1.89 1.40 1.63 1.35 1.81 1.46 2.01 2.04 1.35 1.35033000-0825 0825S 2.62 3.46 3.17 3.58 3.60 3.18 2.35 2.74 2.27 3.05 2.45 3.37 3.43 2.27 2.27033000-083 083 3.32 4.45 4.03 4.54 4.57 4.04 2.99 3.49 2.88 3.87 3.11 4.28 4.36 2.89 2.88

033000-0839 083S 3.75 5.02 4.54 5.12 5.15 4.55 3.37 3.93 3.25 4.37 3.51 4.83 4.92 3.26 3.25033000-084 084 5.30 7.14 6.43 7.25 7.29 6.44 4.77 5.56 4.59 6.18 4.96 6.84 6.96 4.61 4.60

033000-0849 084S 5.37 7.21 6.52 7.35 7.39 6.53 4.83 5.64 4.65 6.26 5.03 6.93 7.05 4.67 4.66033000-162 162

34

1.63 2.19 1.97 2.22 2.24 1.98 1.46 1.71 1.41 1.89 1.52 2.10 2.13 1.41 1.41033000-1629 162S 1.77 2.40 2.14 2.42 2.43 2.15 1.59 1.85 1.53 2.06 1.65 2.28 2.32 1.54 1.53033000-1625 1625S 3.04 4.03 3.69 4.16 4.18 3.69 2.74 3.19 2.63 3.54 2.84 3.92 3.99 2.64 2.64033000-163 163 3.96 5.30 4.80 5.41 5.45 4.81 3.56 4.15 3.43 4.61 3.70 5.10 5.20 3.44 3.43

033000-1639 163S 4.38 5.94 5.32 5.99 6.03 5.33 3.94 4.60 3.80 5.11 4.10 5.65 5.75 3.81 3.80033070-1639 163S (R-410A)033000-164 164 6.72 9.05 8.15 9.18 9.24 8.16 6.04 7.05 5.82 7.83 6.28 8.66 8.81 5.84 5.82

033000-1649 164S 7.28 9.83 8.83 9.96 10.02 8.85 6.55 7.64 6.31 8.49 6.81 9.39 9.56 6.33 6.31033000-165 165 9.40 12.58 11.40 12.86 12.94 11.43 8.46 9.87 8.15 10.96 8.80 12.12 12.34 8.17 8.15

033000-1659 165S 9.69 13.01 11.75 13.24 13.32 11.77 8.71 10.16 8.39 11.29 9.06 12.49 12.71 8.42 8.40166 11.03 14.78 13.38 15.08 15.17 13.40 9.92 11.57 9.55 12.85 10.32 14.22 14.47 9.59 9.56

033000-303 303

61

4.03 5.44 4.89 5.51 5.54 4.90 3.63 4.23 3.49 4.70 3.77 5.19 5.29 3.50 3.49033000-3039 303S 4.60 6.15 5.57 6.28 6.32 5.59 4.13 4.82 3.98 5.35 4.30 5.92 6.03 3.99 3.98033070-3039 303S (R-410A)033000-304 304 7.99 10.75 9.69 10.92 10.99 9.71 7.19 8.38 6.92 9.31 7.47 10.30 10.48 6.94 6.93

033000-3049 304S 9.26 12.44 11.23 12.66 12.74 11.26 8.33 9.72 8.02 10.79 8.66 11.94 12.15 8.05 8.03033000-305 305 10.96 14.71 13.29 14.98 15.07 13.32 9.86 11.50 9.49 12.77 10.25 14.13 14.38 9.52 9.50

033000-3059 305S 12.09 16.26 14.66 16.53 16.63 14.69 10.88 12.69 10.47 14.09 11.31 15.58 15.86 10.51 10.48306 12.30 16.47 14.92 16.82 16.92 14.95 11.07 12.91 10.66 14.33 11.51 15.86 16.14 10.69 10.67

033000-3079 307S 14.99 20.15 18.18 20.49 20.62 18.22 13.48 15.73 12.98 17.46 14.02 19.32 19.67 13.03 13.00033000-413 413

80

4.03 5.44 4.89 5.51 5.54 4.90 3.63 4.23 3.49 4.70 3.77 5.19 5.29 3.50 3.49033000-414 414 8.06 10.82 9.78 11.02 11.09 9.80 7.25 8.46 6.98 9.39 7.54 10.39 10.58 7.01 6.99

033000-4149 414S 9.26 12.44 11.23 12.66 12.74 11.26 8.33 9.72 8.02 10.79 8.66 11.94 12.15 8.05 8.03033000-415 415 10.96 14.71 13.29 14.98 15.07 13.32 9.86 11.50 9.49 12.77 10.25 14.13 14.38 9.52 9.50

033000-4159 415S 12.09 16.26 14.66 16.53 16.63 14.69 10.88 12.69 10.47 14.09 11.31 15.58 15.86 10.51 10.48033000-4179 417S 17.18 23.12 20.84 23.49 23.63 20.88 15.46 18.03 14.88 20.02 16.07 22.15 22.54 14.93 14.90033000-7569 756S

13114.63 19.65 17.75 20.01 20.13 17.79 13.17 15.36 12.68 17.05 13.69 18.87 19.20 12.72 12.69

033000-7579 757S 18.17 24.32 22.04 24.84 24.99 22.08 16.35 19.07 15.74 21.17 17.00 23.42 23.84 15.79 15.75033000-7599 759S 20.01 26.80 24.27 27.36 27.52 24.32 18.00 20.99 17.33 23.31 18.72 25.79 26.26 17.39 17.35

689

FILTER DRIERS

PARKER BI-FLOW FILTER DRYERS — BF SERIESBi-Flow Filter Dryers - BF Series

The “BF” Series bi-flow dryer is designed specifically for heat pump or reverse cycle application. External check valves are not required since they are incorporated within the filter dryer shell. The core design filters out contaminant particles down to 25 microns.

Key Features and Benefits

• 100% copper sweat or nickel plated flare fittings.

• Desiccant core provides reliable and effective removal of solid con-taminants, acid and moisture.

• Model BF-163S-XF features XH11 desiccant design for R-410A applications. Provides three times the filtration as the standard bi-flow.

P4115

• Core is cushioned in fiber gaskets to protect core and to insure trouble-free performance.

• Powder paint exterior coating surpasses 500 hour ASTM salt spray test and resists corrosion.

• U.L. listed file SA3441, CSA certified LR46423

Bi-Flow Dryers — Dimensions

*Model Series BF160-XF is recommended for R-410A applications.

Part NumberFitting Size(in.)

SystemCutoutLength

“A”

SystemCutoutLength

“B”

SystemCutoutLength

“C”

“D”Flare Sweat

BF082S 1/4 4.10 5.27 2.50BF083 BF083S 3/8 6.09 4.10 5.27 2.50BF084 BF084S 1/2 6.35 4.10 5.41 2.50

BF162S 1/4 4.10 5.92 2.50BF163 BF163S 3/8 6.75 4.75 5.92 2.50

BF163S-XF* 3/8 6.09 6.76 7.56 3.00BF164 BF164S 1/2 7.00 4.75 6.06 2.50

BF165S 5/8 4.75 6.30 2.50

P4116

Cooling Mode Heating Mode

Refrigerant Holding Capacities for Bi-Flow Dryers (in oz. of refrigerant @ 100° F)

Bi-Flow Dryer Water Crop Capacity at ARI Conditions

*Model Series BF160-XF is recommended for R-410A applications.

ModelSeries

R-12 R-22 R-134a R-401A R-401B R-401C R-402A R-402B R-404A R-407A R-407B R-407C R-410A R-502 R-507A

BF080 8.17 7.39 7.48 7.27 7.27 6.39 6.74 6.87 6.34 6.97 7.07 6.98 6.44 7.46 6.34BF160 9.54 8.63 8.74 8.49 8.49 7.47 7.87 8.03 7.40 8.14 8.26 8.16 7.52 8.72 7.41

BF160-XF* 15.47 13.99 14.16 13.77 13.77 12.11 12.76 13.02 12.00 13.20 13.39 13.22 12.19 14.15 12.01

ModelSeries

R-12(15 ppm)

75° F/125° F

R-22(60 ppm)

75° F/125° F

R-134a(150 ppm)

75° F/125° F

R-401A/B(50 ppm)

75° F/125° F

R-401C(50 ppm)

75° F/125° F

R-402A(50 ppm)

75° F/125° F

R-402B(50 ppm)

75° F/125° FBF080 105/102 95/88 104/ 99 102/ 92 99/91 103/ 93 103/ 93BF160 148/144 134/124 147/140 144/130 140/129 146/132 146/132

BF160-XF* 186/180 168/155 184/175 180/163 175/161 182/165 182/165

ModelSeries

R-404A(50 ppm)

75° F/125° F

R-407A(50 ppm)

75° F/125° F

R-407B(50 ppm)

75° F/125° F

R-407C(50 ppm)

75° F/125°F

R-410A(50 ppm)

75° F/125° F

R-502(50 ppm)

75° F/125° F

R-507A(50 ppm)

75° F/125° FBF080 103/97 68/62 68/62 73/65 56/50 97/91 104/98BF160 146/137 97/87 97/87 103/93 79/71 137/129 148/138

BF160-XF* 183/172 142/128 142/128 197/176 197/176* 171/161 185/173

690

FILTER DRIERS

PARKER BI-FLOW FILTER DRYERS — BF SERIESBi-Flow Dryer Flow Capacity — Tons of Refrigerant at Pressure Drop 1 psi

Part No. ModelFilter Area

(cu in.)R-12 R-22 R-134a R-401A R-401B R-401C R-402A R-402B R-404A R-407A R-407B R-407C R-410A R-502 R-507A

031653-01 BF082S

10.4

1.6 2.1 1.9 2.2 2.2 1.9 1.4 1.7 1.4 1.9 1.5 2.0 2.1 1.4 1.4031653-02 BF083S 2.1 2.8 2.6 2.9 2.9 2.6 1.9 2.2 1.8 2.5 2.0 2.7 2.8 1.8 1.8031653-03 BF084S 2.7 3.5 3.2 3.6 3.6 3.2 2.4 2.8 2.3 3.1 2.5 3.4 3.5 2.3 2.3031653-04 BF083 2.1 2.8 2.6 2.9 2.9 2.6 1.9 2.2 1.8 2.5 2.0 2.7 2.8 1.8 1.8031653-09 BF084 2.7 3.5 3.2 3.6 3.6 3.2 2.4 2.8 2.3 3.1 2.5 3.4 3.5 2.3 2.3031653-05 BF162S

14.4

1.6 2.1 1.9 2.2 2.2 1.9 1.4 1.7 1.4 1.9 1.5 2.0 2.1 1.4 1.4031653-06 BF163S 2.2 2.9 2.6 3.0 3.0 2.6 2.0 2.3 1.9 2.5 2.0 2.8 2.9 1.9 1.9031653-07 BF164S 2.7 3.5 3.2 3.6 3.6 3.2 2.4 2.8 2.3 3.1 2.5 3.4 3.5 2.3 2.3031653-11 BF165S 3.7 4.9 4.5 5.1 5.1 4.5 3.3 3.9 3.2 4.3 3.5 4.8 4.9 3.2 3.2

BF163 2.1 2.8 2.6 2.9 2.9 2.6 1.9 2.2 1.8 2.5 2.0 2.7 2.8 1.8 1.8BF164 2.7 3.5 3.2 3.6 3.6 3.2 2.4 2.8 2.3 3.1 2.5 3.4 3.5 2.3 2.3

BF163S-XF 2.7 3.6 3.3 3.7 3.7 3.3 2.4 2.8 2.3 3.1 2.5 3.5 3.5 2.3 2.3

COPPER BI-FLOW FILTER DRYERS — CBF SERIESKey Features and Benefits

• Desiccant core provides reliable and effective removal of solid contaminants, acid and moisture.

• All copper construction is corrosion resistant.

Copper Bi-Flow Dryer Data

NOTE: All of these dryers have a .01-.02 tube stop in the inlet and outlet.

Part NumberOverall Length

CoreInlet/Outlet

(in.)032284-052 7.04 3 cu in. core 1/4 inlet and outlet032284-053 7.04 3 cu in. core 3/8 inlet and outlet032284-082 7.98 5 cu in. core 1/4 inlet and outlet032284-083 7.98 5 cu in. core 3/8 inlet and outlet032284-084 7.98 5 cu in. core 1/2 inlet and outlet032284-085 7.98 5 cu in. core 5/8 inlet and outlet032284-162 9.55 8 cu in. core 1/4 inlet and outlet032284-163 9.55 8 cu in. core 3/8 inlet and outlet032284-164 9.55 8 cu in. core 1/2 inlet and outlet032284-165 9.55 8 cu in. core 5/8 inlet and outletP4117

Refrigerant Internal Holding Capacities for Copper Bi-flow Dryers (in oz. of refrigerant @ 100° F)

Copper Bi-Flow Dryer Water Drop Capacity at ARI Conditions

Part No.Series

R-12 R-22 R-134a R-401A/B R-401C R-402A R-402B R-404A R-407A R-407B R-407C R-410A R-502 R-507A

032284-050 7.16 6.47 6.55 6.37 5.60 5.90 6.02 5.55 6.11 6.20 6.12 5.64 6.54 5.56032284-080 9.05 8.18 8.28 8.05 7.08 7.46 7.61 7.02 7.72 7.83 7.73 7.13 8.27 7.03032284-160 11.15 10.08 10.21 9.92 8.73 9.19 9.38 8.65 9.52 9.65 9.53 8.79 10.18 8.66

Part No.Series

R-12(15 ppm)

75° F/125° F

R-22(60 ppm)

75° F/125° F

R-134a(150 ppm)

75° F/125° F

R-401A(50 ppm)

75° F/125° F

R-402A/B(50 ppm)

75° F/125° F

R-404A(50 ppm)

75° F/125° F032284-050 143/130 129/112 141/127 138/118 140/120 141/124032284-080 229/209 207/180 226/202 221/189 224/191 225/199032284-160 358/326 323/281 353/316 345/295 350/298 351/311

Part No.Series

R-407A(50 ppm)

75° F/125° F

R-407B(50 ppm)

75° F/125° F

R-407C(50 ppm)

75° F/125° F

R-410A(50 ppm)

75° F/125° F

R-502(50 ppm)

75° F/125° F

R-507A(50 ppm)

75° F/125° F032284-050 93/79 93/79 101/ 84 81/64 132/117 142/125032284-080 149/126 149/126 161/134 129/102 210/187 227/200032284-160 232/197 232/197 251/210 202/160 328/291 355/312

691

FILTER DRIERS

PARKER COPPER SUCTION LINE DRYER (Cu SLD Series)• High-acid solid core design.

• Flow capacities from 1/6 through 2-1/2 tons.

• Access valve to check system pressure or charge through.

• Applications include refrigerators, freezers, ductless A/C and PTAC units.

NOTE: Model Cu SLD 5/16 is 100% XH6 molecular sieve. Models Cu SLD-3S & 4Sare 50% molecular sieve and 50% activated alumina.

Copper Suction Line Dryer Data

Copper Suction Line Dryer Water Capacity in Drops at 75° F

Part No. Description

Maximum Flow Rate SystemO.A.

Length(in.)

CutoutLength

(in.)22402

134a 401A/B404A502,507

407A/B 410A

CuSLD 5/16 Copper Solid Core Suction Line Dryer 1/3 1/4 1/4 1/3 1/3 1/2 5.31 4.63032104-00 CuSLD-3S Copper Solid Core Suction Line Dryer 2-1/2 2 2 2 2-1/2 2-1/2 6.71 6.00032104-01 CuSLD-4S Copper Solid Core Suction Line Dryer 2-1/2 2 2 1-1/2 2-1/2 2-1/2 6.71 6.00

Part No. DescriptionFittingType

& SizeR-12 R-22 R-134a R-401A/B R-401C R-402A/B R-404A R-407A/B R-407C R-410A R-502 R-507A

CuSLD 5/16 Copper SolidCore Suction Line Dryer

5/16 Sweat 69.4 62.8 68.7 67.2 65.4 68.1 68.3 45.2 48.1 37.1 63.9 69

032104-00CuSLD-3S Copper SolidCore Suction Line Dryer

3/8 Sweat 107.8 97.5 106.6 104.3 101.5 105.8 106 70.1 74.7 57.6 99.2 107.2

032104-01CuSLD-4S Copper SolidCore Suction Line Dryer

1/2 Sweat 107.8 97.5 106.6 104.3 101.5 105.8 106 70.1 74.7 57.6 99.2 107.2

PARKER STEEL SUCTION LINE FILTER DRYERS — “The Original SLD”Parker Hannifin developed and introduced the solid-core clean-up dryer for use in a system suction line. The compact design incor-porates a large outside diameter shell, which results in a shorter lay-in length, and a larger core, which provides a greater filtration area for maximum operating efficiency.

The core material has controlled porosity which effectively removes and holds a maximum amount of contaminants with a minimum of pressure drop. In addition, the core material collects and holds inorganic acids and other harmful contaminants present after a motor burnout. The special binding process pro-tects the core from acid decomposition.

Access valves on both the inlet and outlet sides make it easy to measure pressure accurately. Occasionally, enough contaminant matter may collect in the filter core to cause a slight pressure drop. The access valves on the SLD make it easy to determine if a pressure drop exists and to measure the amount of the drop.


• The original SLD®, solid core, activated alumina suction line filter dryer.

• High acid capacity.

• Low pressure drop — exceptionally high flow rates.

• Designed for system clean-up.

• 500 hours salt spray protection.

• Shortest system cut-out lengths allow installation in tight areas.

• Two access valves simplify pressure drop measurement.

• Flare or solid copper sweat fittings.

• UL listed — File No. SA3441. CSA listed LR46423.

P4118

P4119

692

FILTER DRIERS

PARKER STEEL SUCTION LINE FILTER DRYERS — “The Original SLD”Steel Suction Line Dryer Dimensions

Part No. DescriptionA

Overall Length(in.)

BSystem Cutout

Length(in.)

ShellDiameter

(in.)

031593-01 SLD 8-3VHH Steel Suction Line Filter Dryer 5.13 — 3031593-03 SLD 8-3SVHH Steel Suction Line Filter Dryer 4.31 3.13 3031593-02 SLD 8-4VHH Steel Suction Line Filter Dryer 5.38 — 3031593-04 SLD 8-4SVHH Steel Suction Line Filter Dryer 4.44 3.13 3031593-05 SLD 8-5SVHH Steel Suction Line Filter Dryer 4.66 3.16 3031593-14 SLD 8-6SVHH Steel Suction Line Filter Dryer 4.72 3.16 3031593-09 SLD 13-5VHH Steel Suction Line Filter Dryer 5.82 — 4031593-06 SLD 13-5SVHH Steel Suction Line Filter Dryer 4.91 3.45 4031593-07 SLD 13-6SVHH Steel Suction Line Filter Dryer 4.97 3.45 4031593-08 SLD 13-7SVHH Steel Suction Line Filter Dryer 4.97 3.47 4031593-15 SLD 13-9SVHH Steel Suction Line Filter Dryer 5.72 3.47 4031593-10 SLD 27-7SVHH Steel Suction Line Filter Dryer 6.97 5.47 4031593-11 SLD 27-9SVHH Steel Suction Line Filter Dryer 7.72 5.36 4031593-12 SLD 54-11SVHH Steel Suction Line Filter Dryer 12 9.17 4031593-13 SLD 54-13SVHH Steel Suction Line Filter Dryer 12 9.17 4

P4120

Steel Suction Line Dryer Water Drop Capacities at 65° F

Part No. DescriptionFitting

(in.)Desiccant

(cu. in.)Filter Area

(sq. in.)R-22 &404A

R-134a &407

R-401A &410A

R-502 &507A

031593-01 SLD 8-3VHH Steel Suction Line Filter Dryer 3/8 SAE Flare 8 17.25 168 168 200 185031593-03 SLD 8-3SVHH Steel Suction Line Filter Dryer 3/8 Sweat 8 17.25 168 168 200 185031593-02 SLD 8-4VHH Steel Suction Line Filter Dryer 1/2 SAE Flare 8 17.25 168 168 200 185031593-04 SLD 8-4SVHH Steel Suction Line Filter Dryer 1/2 Sweat 8 17.25 168 168 200 185031593-05 SLD 8-5SVHH Steel Suction Line Filter Dryer 5/8 Sweat 8 17.25 168 168 200 185031593-14 SLD 8-6SVHH Steel Suction Line Filter Dryer 3/4 Sweat 8 17.25 168 168 200 185031593-09 SLD 13-5VHH Steel Suction Line Filter Dryer 5/8 SAE Flare 13-1/2 26 284 284 338 312031593-06 SLD 13-5SVHH Steel Suction Line Filter Dryer 5/8 Sweat 13-1/2 26 284 284 338 312031593-07 SLD 13-6SVHH Steel Suction Line Filter Dryer 3/4 Sweat 13-1/2 26 284 284 338 312031593-08 SLD 13-7SVHH Steel Suction Line Filter Dryer 7/8 Sweat 13-1/2 26 284 284 338 312031593-15 SLD 13-9SVHH Steel Suction Line Filter Dryer 1-1/8 Sweat 13-1/2 26 284 284 338 312031593-10 SLD 27-7SVHH Steel Suction Line Filter Dryer 7/8 Sweat 27 49 568 568 676 624031593-11 SLD 27-9SVHH Steel Suction Line Filter Dryer 1-1/8 Sweat 27 49 568 568 676 624031593-12 SLD 54-11SVHH Steel Suction Line Filter Dryer 1-3/8 Sweat 54 88 1136 1136 1352 1248031593-13 SLD 54-13SVHH Steel Suction Line Filter Dryer 1-5/8 Sweat 54 88 1136 1136 1352 1248

693

FILTER DRIERS

PARKER STEEL SUCTION LINE FILTER DRYERS — “The Original SLD”Steel Suction Line Filter Dryer Ratings and Capacities

Refrigerant R-22 R-134a R-404A R-407A & R-407CEvaporator Temp 40° F 20° F 0° F -20° F -40° F 40° F 20° F 0° F -20° F 40° F 20° F 0° F -20° F -40° F 40° F 20° F 0° F -20° F -40° F

Pressure Drop PSI 3 2 1.5 1 0.5 2.0 1.5 1.0 0.5 3.0 2.0 1.5 1.0 0.5 3.0 2.0 1.5 1.0 0.5SLD 8-3V-HH 1.1 0.8 0.6 0.4 0.2 0.7 0.6 0.5 0.4 1.0 0.7 0.5 0.3 0.3 1.1 0.8 0.6 0.4 0.2SLD 8-3SV-HH 1.2 0.9 0.7 0.5 0.3 0.8 0.7 0.6 0.5 1.0 0.8 0.6 0.4 0.5 1.2 0.9 0.7 0.5 0.3SLD 8-4V-HH 2.3 1.6 1.1 0.7 0.4 1.5 1.2 0.9 0.7 2.0 1.4 0.9 0.6 0.6 2.2 1.6 1.1 0.7 0.4SLD 8-4SV-HH 2.6 1.8 1.2 0.8 0.5 1.7 1.4 1.0 0.8 2.3 1.5 1.0 0.6 0.8 2.5 1.8 1.2 0.8 0.5SLD 8-5SV-HH 3.9 2.6 1.8 1.2 0.6 2.5 2.0 1.5 1.1 3.4 2.2 1.5 1.0 1.0 3.8 2.6 1.8 1.2 0.6SLD 8-6SV-HH 4.2 2.8 1.9 1.3 0.6 2.7 2.1 1.6 1.2 3.6 2.4 1.6 1.0 1.0 4.1 2.8 1.9 1.3 0.6SLD 13-5V-HH 4.1 2.7 2.0 1.3 0.8 2.6 2.0 1.7 1.2 3.6 2.3 1.6 1.0 1.3 4.0 2.7 2.0 1.3 0.8SLD 13-5SV-HH 5.0 3.0 2.5 1.5 1.0 3.2 2.3 2.1 1.4 4.3 2.5 2.1 1.2 1.6 4.9 3.0 2.5 1.5 1.0SLD 13-6SV-HH 7.0 4.5 3.0 2.0 1.0 4.5 3.4 2.5 1.9 6.1 3.8 2.5 1.6 1.6 6.8 4.5 3.0 2.0 1.0SLD 13-7SV-HH 7.0 4.5 3.0 2.0 1.0 4.5 3.4 2.5 1.9 6.1 3.8 2.5 1.6 1.6 6.8 4.5 3.0 2.0 1.0SLD 13-9SV-HH 7.2 4.6 3.1 2.1 1.0 4.6 3.5 2.6 2.0 6.3 3.9 2.5 1.7 1.6 7.0 4.6 3.1 2.1 1.0SLD 27-7SV-HH 10.0 8.0 5.0 3.0 2.0 6.4 6.0 4.2 2.9 8.7 6.8 4.1 2.4 3.2 9.7 7.9 5.0 3.1 2.1SLD 27-9SV-HH 13.0 9.0 6.0 4.0 2.0 8.3 6.8 5.1 3.8 11.3 7.6 4.9 3.2 3.2 12.7 8.3 6.0 4.1 2.1SLD 54-11SV-HH 20.0 13.5 9.5 6.5 3.5 12.8 10.2 8.0 6.2 17.4 11.4 7.8 5.2 5.7 19.5 13.4 9.5 6.6 3.6SLD 54-13SV-HH 23.0 16.0 11.0 7.0 4.0 14.7 12.1 9.3 6.7 20.0 13.5 9.0 5.6 6.5 22.4 15.8 11.1 7.1 4.1

Refrigerant R-407B R-410A R-502 R-507AEvaporator Temp 40° F 20° F 0° F -20° F -40° F 40° F 20° F 0° F -20° F -40° F 40° F 20° F 0° F -20° F -40° F 40° F 20° F 0° F -20°F -40°F

Pressure Drop PSI 3.0 2.0 1.5 1.0 0.5 3.0 2.0 1.5 1.0 0.5 3 2 1.5 1 0.5 3 2 1.5 1 0.5SLD 8-3V-HH 0.1 0.8 0.6 0.4 0.2 1.4 0.6 0.5 0.3 0.1 0.9 0.6 0.4 0.3 0.2 1.0 0.7 0.5 0.3 0.2SLD 8-3SV-HH 1.1 0.8 0.7 0.5 0.3 1.5 0.7 0.5 0.4 0.2 1.0 0.7 0.5 0.4 0.2 1.1 0.8 0.6 0.4 0.2SLD 8-4V-HH 2.1 1.5 1.0 0.7 0.4 2.9 1.2 0.8 0.5 0.3 1.8 1.2 0.9 0.6 0.3 2.1 1.4 0.9 0.6 0.3SLD 8-4SV-HH 2.4 1.7 1.1 0.8 0.5 3.2 1.4 0.9 0.6 0.4 2.0 1.3 1.0 0.7 0.4 2.3 1.6 1.0 0.7 0.4SLD 8-5SV-HH 3.6 2.4 1.7 1.2 0.6 4.8 2.0 1.4 0.9 0.4 3.1 2.1 1.5 1.0 0.5 3.5 2.3 1.5 1.0 0.5SLD 8-6SV-HH 3.9 2.6 1.8 1.3 0.6 5.2 2.1 1.4 1.0 0.4 3.3 2.3 1.6 1.1 0.5 3.8 2.5 1.6 1.1 0.5SLD 13-5V-HH 3.8 2.5 1.9 1.3 0.8 5.1 2.1 1.5 1.0 0.6 3.2 2.3 1.6 1.0 0.6 3.7 2.4 1.7 1.1 0.6SLD 13-5SV-HH 4.6 2.8 2.4 1.4 1.0 6.2 2.3 1.9 1.1 0.7 4.0 2.5 2.0 1.0 0.6 4.5 2.7 2.1 1.2 0.8SLD 13-6SV-HH 6.5 4.2 2.9 1.9 1.0 8.7 3.4 2.3 1.5 0.7 5.0 3.5 2.5 1.5 1.0 6.3 4.0 2.6 1.7 0.8SLD 13-7SV-HH 6.5 4.2 2.9 1.9 1.0 8.7 3.4 2.3 1.5 0.7 5.0 3.5 2.5 1.5 1.0 6.3 4.0 2.6 1.7 0.8SLD 13-9SV-HH 6.7 4.3 2.9 2.0 1.0 8.9 3.5 2.3 1.6 0.7 5.1 3.6 2.6 1.5 1.0 6.4 4.1 2.6 1.7 0.8SLD 27-7SV-HH 9.3 7.5 4.8 2.9 1.9 12.4 6.1 3.8 2.2 1.5 8.0 5.0 4.0 2.5 1.5 8.9 7.2 4.3 2.5 1.6SLD 27-9SV-HH 12.1 8.5 5.7 3.9 1.9 16.1 6.9 4.5 3.0 1.5 10.0 7.0 5.0 3.0 2.0 11.6 8.1 5.1 3.3 1.6SLD 54-11SV-HH 18.6 12.7 9.0 6.3 3.4 24.8 10.3 7.2 4.8 2.6 15.0 10.5 7.5 5.0 3.0 17.9 12.1 8.1 5.4 2.8SLD 54-13SV-HH 21.4 15.1 10.5 6.7 3.9 28.5 12.2 8.3 5.2 2.9 18.0 12.5 9.0 6.0 3.0 20.6 14.3 9.4 5.8 3.2

694

FILTER DRIERS

PARKER REPLACEMENT DRYER SHELLS AND FILTER CORESParker replacement filter cores and dryer shells are designed to provide flexibility over a wide range of applications. All models are designed for use in both theliquid and suction line of refrigeration or air conditioning systems. In single or multiple-core applications, cores may be loaded individually for ease of installa-tion in tight spots. A wide range of fittings for suction-line applications and inter-changeable laying-in dimensions with other manufactured models increase product versatility.

A new design of the internal assembly provides the advantage of using the Parker PFE-48BF filter element, which removes solid contaminants such as cop-per oxides, chips and other metal fines. The new design is also suited for using Parker dryer cores such as the Z-48 or the PCK-48HH, which provides removal of moisture, acid, wax and oil/flux paste.


• Solid copper full flow fittings – 5/8″ to 3-1/8″.• Powder paint exterior coating surpasses 500 hour ASTM salt spray tests and resists corrosion.

• Aluminum end plates and stainless steel bolts resist corrosion.

• For suction application: removable screen.

• U.L. listed file no. SA3441, CSA certified LR46423.

• Working pressure: 500 psi.

• All welded construction.

P4121

Replaceable Core Shell Dimensions

Part No. DescriptionNo. ofCores

ConnectionSize & Type

Dimensions (in.)A B C D E F

089021-01 P-485 Replaceable Core Filter Dryer Shell 1 5/8 ODF 9.14 5.52 3.18 0.63 0.63 4-3/4089021-02 P-487 Replaceable Core Filter Dryer Shell 1 7/8 ODF 9.45 5.83 3.49 0.88 0.88 4-3/4089021-09 P-489 Replaceable Core Filter Dryer Shell 1 1-1/8 ODF 9.45 5.83 3.49 1.00 1.00 4-3/4089021-10 P-4811 Replaceable Core Filter Dryer Shell 1 1-3/8 ODF 9.66 6.04 3.70 1.00 1.00 4-3/4089021-13 P-4813 Replaceable Core Filter Dryer Shell 1 1-5/8 ODF 9.65 6.03 3.69 1.00 1.00 4-3/4089021-15 P-4817 Replaceable Core Filter Dryer Shell 1 2-1/8 10.16 6.54 3.97 1.34 1.34 4-3/4089021-16 P-4821 Replaceable Core Filter Dryer Shell 1 2-5/8 ODF 10.34 6.22 4.16 1.50 1.50 4-3/4089021-03 P-967 Replaceable Core Filter Dryer Shell 2 7/8 ODF 14.95 11.33 3.49 0.88 0.88 4-3/4089021-04 P-969 Replaceable Core Filter Dryer Shell 2 1-1/8 ODF 14.95 11.33 3.49 1.00 1.00 4-3/4089021-11 P-9611 Replaceable Core Filter Dryer Shell 2 1-3/8 ODF 15.16 11.54 3.70 1.00 1.00 4-3/4089021-12 P-9613 Replaceable Core Filter Dryer Shell 2 1-5/8 ODF 15.15 11.53 3.69 1.00 1.00 4-3/4089021-17 P-9617 Replaceable Core Filter Dryer Shell 2 2-1/8 ODF 15.56 11.94 3.97 1.34 1.34 4-3/4089021-18 P-9621 Replaceable Core Filter Dryer Shell 2 2-5/8 ODF 15.75 11.63 4.16 1.50 1.50 4-3/4089021-19 P-9625 Replaceable Core Filter Dryer Shell 2 3-1/8 ODF 15.93 10.57 4.37 1.75 1.75 4-3/4089021-05 P-1449 Replaceable Core Filter Dryer Shell 3 1-1/8 ODF 20.51 16.89 3.49 1.00 1.00 4-3/4089021-06 P-14411 Replaceable Core Filter Dryer Shell 3 1-3/8 ODF 20.72 17.10 3.70 1.00 1.00 4-3/4089021-14 P-14413 Replaceable Core Filter Dryer Shell 3 1-5/8 ODF 20.71 17.09 3.69 1.00 1.00 4-3/4089021-20 P-14417 Replaceable Core Filter Dryer Shell 3 2-1/8 ODF 21.56 17.63 3.97 1.34 1.34 4-3/4089021-07 P-19211 Replaceable Core Filter Dryer Shell 4 1-3/8 ODF 26.28 22.66 3.70 1.00 1.00 4-3/4089021-08 P-19213 Replaceable Core Filter Dryer Shell 4 1-5/8 ODF 26.27 22.65 3.69 1.00 1.00 4-3/4089021-21 P-19217 Replaceable Core Filter Dryer Shell 4 2-1/8 ODF 27.12 23.12 3.97 1.34 1.34 4-3/4

P4121A

695

FILTER DRIERS

PARKER FILTERS AND PRE-FILTERSParker provides a large selection of components for recovery, recycle and reclaim machines, protecting them from the many types of contaminants that are encountered during the servicing of systems.

PF SeriesThe PF 052 & PF 052MF are designed to provide a filtration level of15 microns. When installed on the inlet of your machine it can prevent costly damage by filtering solid contaminants out of the refrigerant before it enters your machine. The Parker pre-filter is for temporary use only and should be changed after servicing a maximum of six to eight systems. Change out may be needed sooner depending on actual system conditions. Various fitting combinations are available.


• Female outlet fitting allows direct mounting to the machine.

• Extended female end fitting provides valve handle clearance.

• Male-to-male fittings allow connection to or between hoses.

• Enlarged depth filtering area.

• UL listed/CSA certified.

SPD SeriesThe SPD series is an enlarged version of the PF Series with drying capabilities. This Super Pre-Filter-Dryer should be installed at the inlet of the machine and used where there are concentrations of contami-nants in the refrigerant. Moisture capacity of this unit size exceeds anything else currently available in the market. The Super SPD series is the ideal solution when transferring large amounts of refrigerant for reclaim or recycle.


• Super high capacity for acid and moisture removal.

• Removes 504 drops of moisture vs. industry standard of150 drops.

• Available with either 1/4″ SAE or 3/8″ SAE flare connections.

• Compatible with all HCFC, CFC and other refrigerants and blends.

LP Gas FilterAdditives to LP gas can cause scaling and flaking of copper andaluminum tubing over a period of time. The Parker LP Gas Filtereffectively removes these contaminants


• Special paint meets U.L. requirements for gas appliances.

P4123

Model Inlet (in.) Outlet (in.)PF 052 1/4 SAE male flare 1/4 SAE male flare

PF 052MF 1/4 SAE male flare 1/4 SAE female flare

(For LP Gas Filter, consult factory for inlet/outlet data and part numbers.)

Model Inlet (in.) Outlet (in.)SPD-162 1/4 SAE male flare 1/4 SAE male flare

SPD-162MF 1/4 SAE male flare 1/4 SAE female flareSPD-163 3/8 SAE male flare 3/8 SAE male flare

P4122

696

FILTER DRIERS

PARKER PRD-3 SERIESSpecifically designed for OEM recovery units that require 3/8″ flareconnections and a larger cross sectional filter area. The PRD-3 filter dryer meets or exceeds OEM specifications providing both value and efficiency.


• High acid and high moisture capacity.

• Enlarged filtration area.

• 3/8″ SAE male flare fittings on both ends.

• Drop in replacement for ASD-28F3 or KH45LD010.

• Compatible with all HCFC, CFC and other refrigerant blends.

Oil Vapor Dryer SeparatorThe Parker Vapor Dryer Separator (VDS Series) removes contaminated oil from a system in addition to solids, acid and moisture. A 1/4″ SAE oil drain access fitting is located on the bottom to provide a continuous means of measuring the amount of oil removed from a system, thereby indicating the amount needed to be replaced. The VDS holds up to four ounces of oil and is reusable for up to 50 pounds of refrigerant, depend-ing upon contamination levels. For rigid or secure mounting, a side bracket is welded to the body. The VDS can also be hung from a mani-fold gauge set with the wire strap provided. A model is available withcoalescing element for improved oil separation.


• Oil removal drain fitting.

• Acid and moisture removal.

• 3/8″ SAE male flare fittings.

• Inlet access valve fitting.

• Mounting bracket.

P4124

P4125

Model Inlet (in.) Outlet (in.)PRD-3 3/8 SAE male flare 3/8 SAE male flare

P4126

697

OIL TEST KIT

ALCO ACID ALERT REFRIGERATION OIL TEST KITHow to Test Oil with the Acid Alert

1. Pour the solution from the small bottle into the large bottle. The bottom layer of this mixture will be purple.

2. Completely fill the small bottle with oil from the unit being tested. Do this immediately after the oil is removed from the crankcase, since exposure to air will contaminate the oil and result in a false test result.

3. Pour the oil into the large bottle and shake vigorously.

4. Wait two to three minutes. A phase separation will develop as the oil rises to the top of the mixture and an aqueous layer forms on the bottom.

How to Read Results of the Acid Alert Test

After the phase separation develops, if the bottom layer of the mixture turns pink to clear, the oil being tested is contaminated with acid. If the Acid Alert Test indicates that oil is contaminated, the system should be cleaned up by means of an oversized liquid line filter drier and a suction line filter drier. If the bottom layer of the mixture remains purple, the oil being tested is not contami-nated with acid.

The Acid Alert Test provides a positive indication that the acid level in the oil being tested is either safe or unsafe. There is no need for marginal judgment readings.

The Acid Alert is an inexpensive, disposable refrigeration oil acid test kit that is a highly accurate service tool providing a conve-nient means for determining when the concentration of acid in the refrigeration oil has reached an unacceptable level.

There is no need to make marginal judgment readings when using the Acid Alert Test Kit. The test provides a positive indica-tion of whether the acid number of the refrigeration oil is safe or unsafe.

CAUTION: DANGER! Toxic, flammable, test solutions contain toluene and methanol. Vapor harmful. Harmful if swallowed. Avoid breathing vapor. If swallowed, call physician. Do not induce vomiting. KEEP OUT OF REACH OF CHILDREN.

NOTE: U.S. Postal regulations prohibit mailing of flammable sol-vents by air or parcel post.

How the Phase II Test Works

The concentration of acid in refrigeration oil is expressed as an acid number in mg KOH per gram of oil (milligrams of potassium hydroxide per gram of oil). The acid number is a measure of the amount of hydroxide solution needed to neutralize the acid in the oil. The more acid there is in the oil, the more potassium hydrox-ide is needed to neutralize it, and so, the higher the acid number.

In the Acid Alert Test, an acid number of 0.05 mg KOH per gram of oil has been set as the maximum acceptable acid concentration for refrigeration oil. Oil with an acid number less than 0.05 mg KOH per gram of oil is acceptable and will cause no change in the color of the acid indicator. Oil with an acid number of 0.05 mg KOH or greater per gram of oil will cause the acid indicator to change from purple to pink or clear indicating that the oil iscontaminated.

Using the Acid Alert with Inhibited Oils

Many inhibited oils contain additives or inhibitors that tend to react like an acid when tested with the Acid Alert Test Kit. Even when these oils are new, the additives may cause the Acid Alert Kit to indicate the oil has an acid number of 0.05 or greater.

Unsatisfactory results found when testing inhibited oils with the Acid Alert, do not necessarily mean that these oils are contami-nated or unsuitable for use in refrigeration equipment. The results merely indicate that these oils contain additives which react like an acid-making the Acid Alert Test Kit results invalid. Refer to the following list of inhibited oils to determine those which can or can-not be tested with the Acid Alert Test Kit.

The Alco Acid Alert Refrigeration Oil Test Kit is convenient, accurate, and simple. It contains two bottles and a four-step

procedure to provide consistent test results. The phase separation provides a positive color change regardless of the

color or condition of oil. Each kit contains everything needed to conduct one test. When in doubt, use the ACID ALERT KIT!

P1400

698

OIL TEST KIT

Satisfactory for Use with the Acid Alert

Unsatisfactory for Use with the Acid Alert

Testing R-11 and R-113 Refrigerant

Most of the inhibited oils which cannot be tested with the Acid Alert Test Kit are used in centrifugal systems. However, the Acid Alert Test Kit can be used to check for excessive acidity in centrif-ugal systems using R-11 or R-113 Refrigerant, even if oil in the systems cannot be checked.

The following procedure should be followed when testing R-11 or R-113 Refrigerant:

1. Pour the solution from the small bottle into the large bottle. The bottom layer of this mixture will be purple.

2. Completely fill the small bottle with refrigerant from the unit being tested. Do this immediately after the refrigerant is removed from the compressor since exposure to air will contaminate the sample and give a false test result.

Nu-Calgon Wholesaler, Inc. C-3Nu-Calgon Wholesaler, Inc. C-4

Zerol® 150Zerol 200TD

Zerol® 300Suniso 3GSSuniso 4GSTexaco WF-32Texaco WF-68

CalumetCalumetChevronCalumetChevronWitcoWitcoWitcoWitco

Delvac 1120DTE Heavy MediumAmerican Industrial 31Ursa HD20Regal PCWS-5124WS-4672Teresso No. 52Rimula 54802Tellus 33Sunvis 620Sunvis 931Polyester Lubricants

Mobil Oil CompanyMobil Oil CompanyStandard Oil (Indiana) Co.TexacoTexacoExxon CompanyExxon CompanyExxon CompanyShell Oil CompanyShell Oil CompanySun Oil CompanySun Oil CompanyAll Manufacturers

3. Pour the refrigerant into the large bottle and shake well.

4. Immediately after shaking, loosen cap carefully to relieve pressure. Wait two or three minutes. When testing R-113, a normal phase separation will develop as the refrigerant rises to the top of the mixture and the aqueous (color-indicating) layer forms on the bottom. When testing R-11, the color-indicating layer will form on the top.

5. If the color-indicating layer:Stays purple — the refrigerant is satisfactoryTurns light pink to clear — the refrigerant is contaminated

If contamination is indicated, necessary steps should be taken to free the system from contamination. Consult the equipment main-tenance manual for specific instructions.

Ordering Instructions

To order, specify:

1. Catalog Number

2. Quantity

NOTE: Products, specifications, and data in this literature are sub-ject to change without notice. Questions regarding product selec-tion for specific applications should be directed to Alco Technical Service Department, Alco Controls, St. Louis, Missouri.

Engineering has advised that the Acid Alert Kit may not be reliable when used with some of the oil additive leak

detectors.

Engineering recommends that the Acid Alert Kit not be used on systems which have used an oil additive leak detector.

These additives have produced inconsistent and/or reliable results.

FOR POE OILS, ORDER ALCO’s NEW POE ALERT!

P/N DESCRIPTIONAA/ALERT KT Acid Alert KitAA KIT POE Alert Kit for POW

FILTER DRIERS -...

Documents

Transcript of FILTER DRIERS -...