Filipino Engineers
-
Upload
s-dela-cruz-bljdo -
Category
Documents
-
view
3.744 -
download
1
Transcript of Filipino Engineers
Filipino Engineers
Submitted to: Engr. Carlito Gutierrez
Chemical Engineers
Engr. Maria Visitacion B. Palattao
Born on the 2nd day of July, 1960. She is currently residing at Lot 13 Block 6 Ambuklao St., Napocor Village, Tandang Sora, QC. She received her Professional License Chemical Engineer in the year 1984. She is also a professional teacher (High School, Science Major) 2006, Civil Service Legibility, 1983
Engr. Maria Visitacion B. PalattaoEducational Background
1. BS Chemical Eng’g2. MS Applied Physics (Thesis lacking)3. Professional Teaching Education (Science Major)
Professional Affiliations1. Member, Philippine Institute for Chemical Engineers (PIChE)2. Member, International Radiation Protection Association (IRPA)3. Member, Canadian Chamber of Commerce4. Member, Int’l Organization for Medical Physicists5. Member, Radioisotopes Society of the Philippines
Engr. Maria Visitacion B. Palattao(Relevant Work and Experiences)
1. Head, Standards Development. Section, PNRI –Present 2. Senior Scientist, Radiological Impact Assessment Section –1994-
20093. Consultant, International Atomic Energy Agency –1997-20004. National Project Counterpart –Establishment of a National
Radioactive Waste Repository in the Philippines (funded by the Int’l. Atomic Energy Agency of the United Nations) –2000-Present
5. Project leader, Forum for Nuclear Cooperation in Asia, Radiation Safety and Radioactive Waste Management –2007-Present
Engr. Maria Visitacion B. Palattao(Significant Contribution to Engineering)
1. Development of standards and regulations for the peaceful application of nuclear and radioactive materials
2. Site selection and conceptual design of a Near Surface Radioactive Waste Facility in the Philippines
3. Environmental Impact Assessment of Nuclear and Radiation Installations
4. Publications of a variety of technical papers on both local and international, scientific journals
Mechanical Engineers
Engr. Ceferino Folloso
• Academician Ceferino L. Follosco was born on February 3, 1931.
• He was known as Ph. D. (honoris causa) Mechanical, Electrical and Agricultural Engineering.
Engr. Ceferino Folloso• Follosco was known for his excellent works and
undertakings in the field of engineering (agricultural mechanization and automotive), technology modernization, public sector domination embracing a wild field of creative approaches in re-engineering and bureaucracy, formulating and implementing laws and programs for small and medium enterprises and S&T administration, with technology transfer, R&D, Engineering and Science Education, Institutional Building.
Engr. Ceferino Folloso• Follosco also lead the development of
foundations involved in upholding quality, productivity, S&T, industry clustering, SME development, education and voluntarism.
• He was elected as Academician in the year 2001.
• Presently he pursue to be an entrepreneur, setting-up and nurturing various business enterprise.
Engr. Ceferino Folloso• He finished numerous degrees namely BSME at
Feati University in 1953, BSEE at Feati University in1955, MSAE at Iowa State University, USA in 1962, M. Mngt. also at Feati University in 1963, Ph. D. Humanities at the Ateneo de Davao in 1991 and Ph. D. Laws, UP System in1992.
Engr. Sharon Rose K. Duran• Age: 27• Birth date: July 22, 1982• Marital Status: Married• Graduated Bachelor of Science in Mechanical Engineering, October 2007Mindanao State University – General Santos City, Philippines
Engr. Sharon Rose K. Duran• Registered Mechanical Engineer, April 2008.
Professional Regulation Commission, Republic of the Philippines. Registration No. 70261
Engr. Sharon Rose K. Duran(Work Experience)
AutoCAD Operator MHI Technical Services Corporation
BPI Buendia Center, Makati CityPlant Pipe Support Engineering Department
October 6, 2008 – October 5, 2009Job Description
• Preparation of 2D drawing using MicroStation V8 for pipe supports such as lug plate, pipe shoe, hangers, U-bolt, etc.
• Preparation of Materials Bill of Quantity• Design Load Calculations
Engr. Sharon Rose K. Duran(Work Experience)
• Cadet EngineerLafarge Cement Services Philippines IncorporatedRepublic Cement Corporation, Bulacan PlantBrgy. Minuyan, Norzagaray, BulacanMaintenance DepartmentJune 2008 – October 2008
Training Description• Integration and management of plant operation• Planning, scheduling and inspection of plant maintenance• Plant products, process and equipments• Maintenance works supervision
Engr. Sharon Rose K. Duran(Work Experience)
• On-the-Job TrainingCoca-Cola Bottlers Philippines, Inc.Bula, General Santos CityMaintenance DepartmentApril 2005 – June 2005On-the-Job Training
Training Description• Process and equipments • General maintenance works
Electronics and Communications
Engineers
Engr. Arvin A. Dela Cruz
Nickname: VinDate of Birth: January 28, 1985Place of Birth: Baguio City, BenguetCitizenship: FilipinoCivil Status: SingleWeight: 55 kgs.Height: 5’6’’Religion: Roman CatholicLanguages Spoken: English, Tagalog, Ilocano
Engr. Arvin A. Dela Cruz(Educational Background)
June 2002 to SAINT LOUIS UNIVERSITY (SLU) May 2008 Bonifacio Street, Baguio City
Bachelor of Science Degree in Electronics and Communications Engineering
June 1998 to SAINT LOUIS HIGH SCHOOL – March 2002 AURORA HILL
Aurora Hill, Baguio City
June 1991 to SAINT LOUIS SCHOOL CENTER March 1998 Assumption Road, Baguio City
June 1990 to LITTLE ANGEL’S NURSERY SCHOOL April 1991 Baguio Cathedral Parish, Baguio City
Engr. Arvin A. Dela Cruz(Affiliations)
2008 – PresentMEMBER, INSTITUTE OFELECTRONICS ENGINEERS OF
THE PHILIPPINES (IECEP)2006 – 2008 MEMBER, INSTITUTE OF
ELECTRONICS ENGINEERS OF THE PHILIPPINES –
STUDENT CHAPTER, (IECEP – SC); CEA, ECE Department, Saint Louis University,
Baguio City2006 – 2007 AIR AND WASTE MANAGEMENT
ASSOCIATION (AWMA); Saint Louis University, Baguio City
Engr. Arvin A. Dela Cruz(Work Experience)
June 2006 to Student Assistant / Enrollment HelperJune 2007 Basic Engineering Dept., College of
Engineering and Architecture, Saint Louis University
Waldo Perfecto Bldg. Bonifacio Street, Baguio City
February 18 to On-the-Job Trainee (OJT)May 21, 2007 Mountain Province Broadcasting
Corporation (MPBC)Bonifacio Street, Baguio City
Engr. Arvin A. Dela Cruz(Work Experience)
April 13, 2009 to TIPI Package Engineering (TPE)/ New August 21, 2009 Product Development (NPD)
Engineering ApprenticeTexas Instruments (Philippines) Incorporated, TIPI
PEZA, Loakan Road, Baguio CityAugust 24, 2009 to Process EngineerPresent Texas Instruments (Philippines)
Incorporated, TIPIPEZA, Loakan Road, Baguio City
Worked as Process Engineer under the QFP Finish / BGA Encapsulation Area of Assembly Operations Section on Texas Instruments (Phil.) Inc.
Engr. Ronel Amto Baquilan Barbaso Compound, South Proper,Galas, Dipolog City
Age : 22Civil Status : SingleDate of Birth : October 8, 1987Place of Birth : Ozamis CityCitizenship : FilipinoFather’s Name : Romulo G. Baquilan, Sr.Occupation : DriverMother’s Name : Nenita A. BaquilanOccupation : Housekeeper
Engr. Ronel Amto Baquilan
Educational Attainment:Galas Elementary School (1st Honorable Mention,2000)Galas National High School (2nd Honorable Mention,2004)Andres Bonifacio College (Consistent Honor, 2009) Degree: Bachelor of Science in Electrical Engineering
Eligibility / Competence:• Licensed Electrical Engineer (September 2009)• With Professional Driver’s License• DOST Scholar (College)
Engr. Ronel Amto Baquilan
(Organizational Affiliations and Designations) • Club President (SY 2008-2009)
Association of Future Electrical Engineers (AFEE)• Curriculum Vice Mayor (SY 2008-2009)
Engineering Student Council• Editor-in-Chief (SY 2003-2004)
Ang Sulo (Ang Opisyal na Pahayagan ng Paaralang Sekundarya ng Galas)
• Editor-in-Chief (SY 1999-2000)The Vision (The Official Publication of Galas Elementary School)
Engr. Ronel Amto Baquilan (Special Awards Received)
• 1st Place- Editorial Writing (Filipino)During the Division Schools Press Conference 2003
• 2nd Place- MTAP-DepEd Metrobank Math Challenge 2003
Electrical Engineers
Engr. Jaime V. Mendoza• Currently, a Member of the Board of Electrical Engineering, Professional Regulation Commission and the Chairman of the Distribution Management Committee.
Engr. Jaime V. Mendoza• He also worked as a Consultant for the ADB
and WB after retiring from the National Electrification Administration where he worked for 25 years.
• He is also a lecturer at the National Engineering Center of the UP-Diliman in Competency Training in Power System Engineering.
Engr. Jaime V. Mendoza
• A BSEE graduate of Pamantasan ng Lungsod ng Maynila(PLM) and had a Master Degree in Technology Management at UP-Diliman.
• He also earned a 30 units in Master of Science in Electrical Engineering (power) at UP-Diliman and a Diploma in Electric Power Distribution System in Norwegian Institute of Technology in Trondheim, Norway.
Engr. Jaime V. Mendoza• Had also a Diploma in Leadership and
Management in Ateneo University and a product of Meralco Power Engineering Program (MPEP-EE).
• Currently, taking his Ph. D. in Energy Engineering at UP-Diliman.
Engr. Jaime V. Mendoza
• A ninth placer in the Board Examinations for Registered Professional Electrical Engineers in 1982 (PRC Registration No. 1658 & Registration Date: 10-21-1982) and a second placer on the Statistical Exam.
Engr. Jaime V. Mendoza
• Awarded Manager of the Year in 2002 by NEA and Outstanding Service Award by the IIEE in 2000.
• He is a Senior Member of the IIEE.
Engr. Ceferino Folloso
• Academician Ceferino L. Follosco was born on February 3, 1931.
• He was known as Ph. D. (honoris causa) Mechanical, Electrical and Agricultural Engineering.
Engr. Ceferino Folloso• Follosco was known for his excellent works and
undertakings in the field of engineering (agricultural mechanization and automotive), technology modernization, public sector domination embracing a wild field of creative approaches in re-engineering and bureaucracy, formulating and implementing laws and programs for small and medium enterprises and S&T administration, with technology transfer, R&D, Engineering and Science Education, Institutional Building.
Engr. Ceferino Folloso• Follosco also lead the development of
foundations involved in upholding quality, productivity, S&T, industry clustering, SME development, education and voluntarism.
• He was elected as Academician in the year 2001.
• Presently he pursue to be an entrepreneur, setting-up and nurturing various business enterprise.
Engr. Ceferino Folloso• He finished numerous degrees namely BSME at
Feati University in 1953, BSEE at Feati University in1955, MSAE at Iowa State University, USA in 1962, M. Mngt. also at Feati University in 1963, Ph. D. Humanities at the Ateneo de Davao in 1991 and Ph. D. Laws, UP System in1992.
Industrial Engineers
Engr. Wilson B. Celocia Age: 22Sex: MaleNationality: FilipinoReligion: Roman CatholicCivil Status: SingleBirth date: December 14, 1985Birth place: Lapu- Lapu City District HospitalLanguage Spoken: English, Tagalog, CebuanoSpecial Skills: Computer Literate, Leadership
Engr. Wilson B. Celocia(Educational Background)
Tertiary : Bachelor of Science in Industrial EngineeringCebu Institute of TechnologyN. Bacalso Ave., Cebu CityBatch- March 2008
High School: Saint Alphonsus Catholic SchoolPoblacion, Lapu-Lapu CityBatch 2003
Elementary: Basak Elementary SchoolBasak, Lapu-Lapu CityBatch 1999
Engr. Wilson B. Celocia(Seminars/ Training/ Tours Attended)
1. Industrial Safety August 08, 2007/CIT AVR
2. Cebu International Furniture & March 1, 2007/Waterfront Hotel, Lahug, Furnishings Exhibition 2007 Cebu City
3. Corporate Values Seminar December 07, 2006/CIT AVROfficers Training Course (OTC) August 19-20, 2007/Laplaya Resort, Badian
4. Financial Management Seminar March 11, 2006/CIT AVR
5. Managing a Production: A Difficult Task March 10, 2006/CIT AVR
Engr. Wilson B. Celocia(Seminars/ Training/ Tours Attended)
6. Personnel Management Seminar February 28, 2006/CIT AVR
7. Leadership and Communication SkillsEnhancement February 21, 2006/CIT AVR
8. Human Resource Management February 08, 2006/CIT AVR
9. 5S February 16, 2006/CIT Auditorium
10. Time Management Seminar February 11, 2006/CIT AVR
11. Solid Waste Management Seminar January 19, 2005/CIT AVR
Engr. Wilson B. Celocia(Work Experience)
Company Name : Celestica Philippines Inc.Position Title : Commodity Management AssociateSpecialization : Supply Chain ManagementIndustry : Manufacturing / ProductionDate Joined : March 24, 2008Date Left : Present
Company Name : LEAR Corporation (Plant Gabriela)Position Title : Industrial Engineering On the Job TraineeSpecialization : Engineering – IndustrialIndustry : Manufacturing / ProductionDate Joined : November 05, 2007Date Left : February 04, 2008
Engr. Ma. Eredita M. Piodos NICKNAME: RedAGE: 25 years oldBIRTHDATE: July 06, 1983BIRTHPLACE: Cebu CityCITIZENSHIP: FilipinoMARITAL STATUS: SingleRELIGION: Roman CatholicSEX: FemaleWEIGHT: 100 lbs.HEIGHT: 5’2”LANGUAGES: Cebuano, Tagalog, English
Engr. Ma. Eredita M. Piodos(Educational Background)
ELEMENTARY: 1990 - 1996 Salazar Institute of Technology 211 N. Bacalso Avenue, Cebu City
SECONDARY: 1996 - 2000Cebu Institute of TechnologyN. Bacalso Ave. Cebu City
TERTIARY: 2000 - 2005Cebu Institute of TechnologyN. Bacalso Ave., Cebu CityCOURSE: Bachelor of Science in Industrial Engineering
Engr. Ma. Eredita M. Piodos(Affiliations and Seminars)
AFFILIATIONIndustrial Engineering Council MemberCebu Institute of Technology2000-At-present
SEMINARS ATTENDED: Total Quality Management SeminarCebu Institute of Technology, Cebu City
: Environmental Management SeminarCebu Institute of Technology, Cebu City
: High Productivity: The Key to Profitability SeminarCebu Institute of Technology, Cebu City
Engr. Ma. Eredita M. Piodos(Work Experiences)
ASIA TECHNOLOGIES CORPORATIONPosition: Visual Aid Supervisor( LEAR - PLANT RIZAL)(November 2007 to December 2008) Specific tasks:• Efficiency monitoring• Scheduling• Billing• System Analysis
Engr. Ma. Eredita M. Piodos(Work Experiences)
ASIA TECHNOLOGIES CORPORATIONPosition: Industrial Engineer( PENTAX Production)(May 2007 to November 2007) Specific tasks:• Making daily sales report• Time & motion study• Line balancing• Hourly output monitoring• Efficiency monitoring• Scheduling
Engr. Ma. Eredita M. Piodos(Work Experiences)
ASIA TECHNOLOGIES CORPORATIONPosition: Production Supervisor( TIMEX Production)(January 2005- May 2007) Specific tasks:• Making daily sales report• System Analysis• Inventory Planning & Control• Production Planning• Parts monitoring• Line balancing• Hourly output monitoring• Efficiency monitoring• Delivery monitoring
Engr. Ma. Eredita M. Piodos(Work Experiences)
ASIA TECHNOLOGIES CORPORATIONPosition: IE-OJT (October 2004 – January 2005) Specific tasks as an OJT trainee:• System Analysis• Time & Motion study• Inventory Planning & Control• Line Balancing• Production Planning• Scheduling• Layout• Monitoring of Stocks
Engr. Ma. Eredita M. Piodos(Work Experiences)
BCVILLE INTERNATIONAL CORPORATIONPosition: Industrial Engineer (February 2008 – April 2008) Specific tasks:• System Analysis• Time & Motion study• Layout
Civil Engineers
Engr. Francisco E. Belocura Jr. Course: Bachelor of Science in Civil EngineeringName of School: University of San Carlos Technological CenterLocation: Talamban Cebu City, PhilippinesDate Graduated: April 13, 1991
Engr. Francisco E. Belocura Jr.High School/Secondary:
Name of School: University of San Carlos Boy’s High SchoolLocation: General Maxilum Avenue Cebu City, PhilippinesDate Graduated : March 26, 1986
Licensure Examinations Taken:
Civil Engineering Philippine Board Exam-Nov.1991Title of Examination : Mathematics & Surveying, Hydraulic and Structural DesignDate of releasing exam result : Nov.17, 1992 ( PASSED )
Engr. Francisco E. Belocura Jr.Home Address: Bulacao, Cebu City, 6000 PhilippinesPlace of Birth: Dumanjug , Cebu 6000 PhilippinesAge: 39 yrs. OldCivil Status: MarriedNationality: FilipinoHeight: 5’5”Weight: 154 lbsReligion: Roman CatholicSkills: Strong Leadership, Interpersonal skills and management. Result
oriented team player and creative. Language spoken: English, Tagalog, Cebuano, Hindi (basic)Computer Background: Microsoft Excel, Microsoft Word, Auto cad
Engr. Francisco E. Belocura Jr.TRAININGS/SEMINARS ATTENDED:
March 16, 2008Supervisor Skills SessionQatar Gas Onshore & Common LNG ProjectTopic: Incident and Injury – Free
Feb.22, 2008Movenpick Hotel, Doha QatarTopic: Contracts Seminar-FIDIC
Engr. Francisco E. Belocura Jr.(Work Experience)
LABORATORY TECHNICIAN: D.M. CONSUNJI, INC.( Jan. 27, 1992 – Nov. 20, 1992 ) Mactan Shangri-la Hotel Project Buot, Punta Engaño, Lapu-lapu City, Philippines( Project Cost = 0.9 billion Php)
CLIENT: MACTAN SHANGRI-LA HOTEL
JOB DESCRIPTION: 1. Performs Field Density Testing ( FDT ) on site development works for roadways, parking areas and outdoor playing areas2. Performs laboratory compaction test.3. Conducts sampling of concrete cylinders at job site.4. Performs compression test of concrete cylinders in the laboratory.
Engr. Francisco E. Belocura Jr.(Work Experience)
5. Conducts testing of quality of cement by:a. Setting time of cement according to ASTM standard using vicat
method.b. Compressive strength of cement using ottawa sand as per ASTM
standard.6. Conducts testing of quality of sand and gravel by:
a. Sieve analysisb. Unit weight ( loose and rodded )c. Specific gravity and absorptiond. Fineness moduluse. Clay lumpsf. Materials finer than no. 200 sieveg. Abrasion
Engr. Francisco E. Belocura Jr.(Work Experience)
MATERIALS ENGINEER: D.M. CONSUNJI, INC.(Nov. 21, 1992 - April 31, 1994 ) Cebu Ayala Center Project Archbishop Reyes AvenueCebu City, Philippines ( Project Cost = 1.2 billion Php )
CLIENT: AYALA CORPORATION - CEBU HOLDINGS INC.
Engr. Francisco E. Belocura Jr.(Work Experience)
JOB DESCRIPTION:1. Supervises concrete Batching Plant operation. 2. Designs concrete mixtures and mortars for masonry works.3. Evaluates materials that are suitable for composition of concrete
as per ASTM specification.4. Supervises testing of materials in the laboratory.5. Evaluates materials suitable for sub base, base coarse and backfilling.6. Supervises and controls lay-out, elevations, sub base & base coarse preparation, concreting of roadways and asphalting of outdoor parking areas.7. Inspects and supervises backfilling & compaction and field density testing (FDT) of roadways and outdoor parking areas.
Engr. Francisco E. Belocura Jr.(Work Experience)
MATERIALS ENGINEER: CEBU ARABELLA BUILDERS, INC.LAND DEVELOPMENT SUPERVISOR Windfields Subdivision Project ( May 11, 1994 - Nov. 4, 1995 ) Barangay Tolo-toloConsolacion Cebu , Philippines(Project Cost = 300 million Php)OWNER-DEVELOPER
JOB DESCRIPTION:1. Plans , schedules and supervises land development works on a 33 hectares rolling terrain land profile for construction of mass housing , main roads, access roads, and club house.2. Controls and supervises backfilling & compaction works with an average height of 15 meters above original ground level and with approximate volume of 900,000 m³.3. Controls and supervises earth moving works with approximate volume of 1.2 billion cu.m. bulk excavation.
Engr. Francisco E. Belocura Jr.(Work Experience)
4. Inspects and supervises construction of drainage lines, potable water lines, elevated concrete water reservoir, box culverts, open canals, retaining walls, ripraps, gabions, etc.
5. Evaluates materials suitable for backfilling and compaction works.6. Checks and controls construction materials such as cement , sand , gravel
and reinforcing bars as per project specification.7. Takes charge in material testing and documentation works.8. Designs light weight concrete for pre-cast wall paneling for housing
construction.9. Designs concrete mixtures for housing and roadway construction.10. Supervises and controls quality and productivity of housing construction.11. Prepares daily project accomplishment report and evaluates billings of sub-
contractors.
Engr. Francisco E. Belocura Jr.(Work Experience)
EARTHWORKS ENGINEER: D.M. CONSUNJI, INC.MATERIALS ENGINEER New Apo Cement Project( Nov. 6, 1995-Feb.10, 1996 ) Tina-an, Naga Cebu Philippines( Project Cost = 104 million Php )
MAIN CONTRACTOR: DYWIDAG, PHILIPINE
CLIENT: APO CEMENT CORPORATION
Engr. Francisco E. Belocura Jr.(Work Experience)
JOB DESCRIPTION:1. Plans, schedules and supervises the following earth moving works:
a. Bulk excavation ( ± 600,000 m³ ) b. Backfilling and compaction ( ± 300,000 m³ ) c. Established boundaries and designed elevations d. Plans & schedules hauling of surplus excavated
soil materials2. Supervises Field Density Testing ( FDT ) on backfilling works3. Prepares daily monitoring report of project accomplishment.
Engr. Francisco E. Belocura Jr.(Work Experience)
CONSTRUCTION MANAGER: KETTANEH CONSTRUCTION EMIRATES( March 29, 2008 – Sept.17,2008 ) 1-Propylene Concrete Storage Tank Project Al Ruwais, Abu Dhabi, UAE( Project Cost = 6.5 million US$ )
CONSTRUCTION MANAGER: KETTANEH CONSTRUCTION QATAR W.L.L.( May 01, 2007 – March 28,2008) 5-Liquefied Natural Gas Concrete Storage Tank Project
SITE ENGINEER: Ras Laffan Industrial City, Qatar( Sept.18,2005 – April 30,2007) ( Project Cost = 43. 5 million US$ )
PROJECT PROFILE: Construction of (5) Liquefied Natural Gas (LNG) Concrete Storage Tank at 140,000 cu.m. capacity each & (1) Propylene Concrete Storage at 23,000 cu.m. capacity.
Engr. Rogelio T. Artillaga Present Address: T-7 Macaraya
Dormitory, Capricorn St., Pleasant HomesSubd., Labangon, Cebu City
Birth Date: September 16, 1966Age: 42 yrs. OldCivil Status: SingleReligion: Roman CatholicNationality: FilipinoBirth Place: Cebu CityHeight: 5 ft. 5 inches (165 cm)Weight: 148 lbs. (67 kgs.)Languages Spoken: English, Tagalog &
Cebuano
Engr. Rogelio T. Artillaga(Educational Background)
College: University of San Jose Recoletos – CebuApril 1983 - March 1988Course : Bachelor of Science in Civil EngineeringGen. Weighted Ave. : 1.635909
Secondary: Colegio de San Jose Recoletos - CebuJune 1979 - March 1983
Elementary: Colegio de San Jose Recoletos - CebuJune 1973 - March 1979
Engr. Rogelio T. Artillaga(Trainings and Seminars)
1. Comprehensive Training Program for Safety Officer/ Engineer in the Construction, Petrochemical and Oil & Gas Industry – RODECH
Training Services Link Int’l, Inc. A. Basic RIGPASS Safety Orientation::
General Safety, Assignment of Responsibilities, Why Safety?Importance of Occupational Safety & Health, Tool-Box Meetings,Personal Protective Equipment (PPE), Hand Tools, TemporaryStructures, Fall Protection, Accident Investigation, Crane Safety,Vehicular Safety and Defensive Driving, Excavation Safety, Demolition Safety, Explosives Safety, Hazard Recognition, Materials
Handling & Storage, Industrial Hygiene, Ergonomics, Specialized Work Procedures, Fire Safety, Compressed Gas Cylinder Handling, Permit To Work System, Electrical Safety, Machine Safeguarding, Occupational Safety & Health Program, Offshore Transport Safety, Water Safety & Sea Survival and Rig Platform Environment
Engr. Rogelio T. Artillaga(Trainings and Seminars)
B. Hydrogen Sulfide (H2S) Safety & SCBA InstructionC. Drilling Technology (On-shore/Off-shore)D. Standard First Aid with Professional CPR & AED Training
2.Cementitious Polymer Injection System & GYPROC Performance Boards and Wall Solutions – Philippine Institute of Civil Engineers – Cebu Chapter
3. Bank Credit Investigation & Appraisal – Cebu Bank Credit Investigators &Appraisers – Cebu
4.Earthquake Structural & Construction Design Methods – Philippine Institute of Civil Engineers – Cebu Chapter
Engr. Rogelio T. Artillaga(Work Experience)
Appraiser II : Philippine Savings BankMay 1991 – April 2002 (10 yrs./11mos)*Scope of Work:- Conduct property appraisal and estimates by doing actual site inspections.- Conduct property title verification, registration and cancellation. - Conduct further and additional verification to ascertain collateral-property’s acceptability. - Prepare appraisal report. - Monitor construction material prices as a guide for appraisal report.
Engr. Rogelio T. Artillaga(Work Experience)
Project Engineering Assistant: RM Mondares ConstructionApril 2002 – April 2004 (2 yrs./0 mos)*Scope of Work:- Prepare estimates. - Conduct project site inspection. - -Monitor and implement
standard building codes & specifications. -Remind workers daily on safety measures. -Coordinate with office technical staff.-Prepare actual daily/weekly/monthly accomplishment reports. -Other tasks as assigned in relation to documentations, and
fast tracking of processing.
Engr. Rogelio T. Artillaga(Work Experience)
Health Safety & Environment: Gothek Construction Corp.Officer April 2004 – Sept. 2008 (4 yrs./5mos)*Scope of Work:-Conduct short tool-box talk. -Conduct actual site Inspection. -Monitor site critical activities on the basis of the Safety Task
Analysis Risk Reduction Talk Card & Permit to Work.-Record and report incidents/near miss and accidents.-Conduct orientation, trainings and audit inspection.-Mitigate hazard and risk identified and bring it to as low as
reasonably practicable level.
Engr. Rogelio T. Artillaga(Work Experience)
-Provide recommendations like safe working, good working and good engineering practices.
-Check personal protective equipment conditions and usage.-Prepare the following reports (Man-hours, Non-Lost Time Accident, Lost-Time Incident and Accident, First-aid and Medical Treated Cases, Lost –Man Day Away from Work, Vehicle Mileage Run, Near Miss and Accident Occurrences, Weekly Safety Meetings, Total No.
of Orientations, Manpower, Trainings, Inspection and Audit)
References: http://www.iiee.org.ph/home/index.php/BEE-Profile http://www.famousfilipino.com/scientist-and-inventors/ceferino-follosco.html http://mynimo.com/resumes/view/14800 http://mynimo.com/resumes/view/7365
Engr. Fe Grafilo (+639154442961)
#71 Judge, Juan Luna St.,SFDM, Quezon City Engr. David Garcia Jr., Support Engineer (+639278632309)
MHI Technical services Corporation
25th BPI Buendia Center, Gil Puyat St.,Makati City
Submitted by: Sheryl Dela Cruz Nico Dela Cruz Kennen Dumlao Matthew Dela Rosa
Section 1-11