FIL SP TH in Rev 00- 06_08

2
= MPA NRW 550035 0 89-03 550035 0 89-05 # = test report RNE – CETIAT N° 920393/6 A 920393/6 B 920393/6 C Tecnologie di Filtrazione s TECHNICAL CHARACTERISTICS MEDIA = Glass fibre paper SEPARATORS = Hot melt gluing. SEALANT = Two components cold moulded polyurethane. FRAME = Full plastics. EFFICIENCY # CODE EUROVENT 4/5 CLASSIFICATION AVERAGE EFFICIENCY, Em % 0,4µm CEN - EN 779 EN 779 CLASSIFICATION TH EU9 95 Em F9 WORKING TEMPERATURE = 80°C RELATIVE HUMIDITY = 90% max. FIRE RESISTANCE = This filter can be incinerated without the emission of toxic gases and dust in town incinerators. SPECIAL MODELS = Final code : _ _ 2 R = Two side protective grids version Final code : _ _ 0 G = Eight grids version Neoprene gasket version on request FIL SP RIGID POCKETS TH TYPICAL APPLICATIONS High efficiency air filtration in reduced dimensions and high flow filtering units applications Thanks to its construction and high filtering surface, the ERISFIL filters have a longer clogging time than standard flat pockets, moreover there is no risk of loss of clogged dusts, as well as glass fibres. ADVANTAGES Strong and rigid construction that permits an easy and quick installation. Compact project with reduced volume (292 mm width, 25 mm flange) High filtering surface and long clogging time. Increasing efficiency during the utilisation.

Transcript of FIL SP TH in Rev 00- 06_08

Page 1: FIL SP TH in Rev 00- 06_08

∗ = MPA NRW 550035 0 89-03 550035 0 89-05 # = test report RNE – CETIAT N° 920393/6 A 920393/6 B 920393/6 C

Tecnologie di Filtrazione s TECHNICAL CHARACTERISTICS MEDIA = Glass fibre paper SEPARATORS = Hot melt gluing. SEALANT = Two components cold moulded polyurethane. FRAME = Full plastics. EFFICIENCY ∗ #

CODE EUROVENT 4/5 CLASSIFICATION

AVERAGE EFFICIENCY, Em % 0,4µm CEN - EN 779

EN 779 CLASSIFICATION

TH EU9 95 ≤ Em F9 WORKING TEMPERATURE = 80°C RELATIVE HUMIDITY = 90% max. FIRE RESISTANCE = This filter can be incinerated without the emission

of toxic gases and dust in town incinerators. SPECIAL MODELS = Final code : _ _ 2 R = Two side protective grids version

Final code : _ _ 0 G = Eight grids version

Neoprene gasket version on request

FIL SP RIGID POCKETS TH

TYPICAL APPLICATIONS

High efficiency air filtration in reduced dimensions and high flow filtering units applications Thanks to its construction and high filtering surface, the ERISFIL filters have a longer clogging time than standard flat pockets, moreover there is no risk of loss of clogged dusts, as well as glass fibres.

ADVANTAGES

Strong and rigid construction that permits an easy and quick installation.

Compact project with reduced volume (292 mm width, 25 mm flange)

High filtering surface and long clogging time.

Increasing efficiency during the utilisation.

Page 2: FIL SP TH in Rev 00- 06_08

L

D

W25

FIL

SP T

H

Pressure drop as a function of the air flow rate (clean device)

0255075

100125150175200225250275

0 500 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500Air flow rate (m3/s)

Pres

sure

dro

p (P

a)

SP30 SP29 SP32SP31

CODE Dimensions W x L x D

Flow rate

Filtering surface

Initial pressure drop Volume Weight

mm m3/h m2 Pa m3 kg

SP 29 TH 00 402 x 593 x 292 3300 11,80 230 0,084 4,00

SP 30 TH 00 288 x 593 x 292 2250 8,5 230 0,060 3,15

SP 31 TH 00 491 x 593 x 292 4100 14,5 230 0,102 4,50

SP 32 TH 00 593 x 593 x 292 5000 18,0 230 0,123 5,50

Recommended final pressure drop ≤ 600 Pa Maximum final pressure drop ≤ 1000 Pa

Subject to change without prior notice

Freudenberg Tecnologie di Filtrazione

20017 Mazzo di Rho (MI) Italy – Via Risorgimento, 34 – Tel 0039 02 9346681 – Fax 0039 02 93904394 UNI EN ISO 9001 – 2000 N° 156/05

FIL SP TH in- Rev. 00 –06/08