FIBREGLASS LADDERS CONTENTSmail.frigerio.info/doc/Catalogo 2016 pdf - ING/5-scale...CONTENTS RANGE...
12
CONTENTS RANGE OF PROFESSIONAL FIBREGLASS LADDERS FIBREGLASS LADDERS Page 123 Art. V015 Page 125 Art. V016 Page 124 Art. V025 Page 124 Art. V026 Page 123 Art. V033 Page 126 Art. V045 Page 127 Art. V046 Page 127 Art. V047 Page 128 Art. V048 Page 128 Art. V051 Page 129 Art. V060 Page 125 Art. V080 Page 126 Art. V691 RANGE OF MIXED PROFESSIONAL LADDERS Page 130 Art. 3045 V Page 130 Art. 3047 V Page 131 Art. 3051 V Page 131 Art. 3060 V 121 Page 132 Ladders generic accessories Recommended retail prices - VAT excluded. Fibreglass ladders Safety according to legal regulations. Frigerio Spa does not make compromises as regards the safety of the products. This is why the aluminium-fibreglass ladders are covered by a total warranty for any manufacturing defects and satisfy the good design criteria applicable by the most important Italian and European regulatory standards on the matter. Sturdy and strong to last over time. Frigerio fibreglass ladders and mixed ladders are made of top The manufacturing processes used at the Frigerio factories use the most modern and leading-edge technology, using welding robots and CNC machines. Stringent tests are conducted on every article before delivery, ensuring the user sturdiness and reliability over time of products, expressly designed for professional use. quality raw materials. Utmost attention to all details. All fibreglass ladders and mixed ladders are designed to facilitate the work of those who use these daily for their activities. The products may not come under all the certification marks above FRIGERIO OVERALL SAFETY STANDARDS UNI 10401 STANDARDS EN 14183 STANDARDS EN 287/2/2 STANDARDS EN 131 STANDARDS D.L. 81 CEI EN 61478 on request 36.000 V Safety of the electrical insulation. The rung-upright connections have been tested according to CEI-EN- 50528 (for voltages up to 1000V AC and 1500 DC) and according to CEI- EN-61478 (category 1 - for voltages up to 36,000 V). These regulatory standards involve immersion of the ladder in water and then drying it; application of live electrodes between the pair of steps and successive thermography to check for excessing overheating, as well as for the absence of discharge. A «tailor-made» consultancy service Backed by experience in the production of special ladders, Frigerio can produce customised and equipped ladders; batches conforming to standards or specifications of national electrical Bodies. On request ladders are supplied for operations at high voltages up to 36 kV, in compliance with CEI EN 61478. The cost of certification (obligatory for every supply) is quantified from time to time. CEI EN 50528 1000Vac - 1500Vdc 5 YEARS FRIGERIO WARRANTY 3,000,000 Damage to property and persons PRODUCT INSURANCE
Transcript of FIBREGLASS LADDERS CONTENTSmail.frigerio.info/doc/Catalogo 2016 pdf - ING/5-scale...CONTENTS RANGE...
CONTENTS
RANGE OF PROFESSIONAL FIBREGLASS LADDERS
FIBREGLASS LADDERS
Page 123Art. V015
Page 125Art. V016
Page 124Art. V025
Page 124Art. V026
Page 123Art. V033
Page 126Art. V045
Page 127Art. V046
Page 127Art. V047
Page 128Art. V048
Page 128Art. V051
Page 129Art. V060
Page 125Art. V080
Page 126Art. V691
RANGE OF MIXED PROFESSIONAL LADDERS
Page 130Art. 3045 V
Page 130Art. 3047 V
Page 131Art. 3051 V
Page 131Art. 3060 V
121
Page 132Ladders generic accessories
Recommended retail prices - VAT excluded.
Fibr
egla
ss la
dder
s
Safety according to legal regulations.Frigerio Spa does not make compromises as regards the safety of the products. This is why the aluminium-fibreglass ladders are covered by a total warranty for any manufacturing defects and satisfy the good design criteria applicable by the most important Italian and European regulatory standards on the matter.
Sturdy and strong to last over time.Frigerio fibreglass ladders and mixed ladders are made of top
The manufacturing processes used at the Frigerio factories use the most modern and leading-edge technology, using welding robots and CNC machines. Stringent tests are conducted on every article before delivery, ensuring the user sturdiness and reliability over time of products,expressly designed for professional use.
quality raw materials.
Utmost attention to all details. All fibreglass ladders and mixed ladders are designed to facilitate the work of those who use these daily for their activities.
The products may not come under all the certification marks above
FRIGERIO OVERALL SAFETY
STANDARDS
UNI 10401STANDARDS
EN 14183STANDARDS
EN 287/2/2
STANDARDS
EN 131STANDARDS
D.L. 81
CEI EN 61478on request
36.000 V
Safety of the electrical insulation.
The rung-upright connections have been tested according to CEI-EN- 50528 (for voltages up to 1000V AC and 1500 DC) and according to CEI- EN-61478 (category 1 - for voltages up to 36,000 V).These regulatory standards involve immersion of the ladder in water and then drying it; application of live electrodes between the pair of steps and successive thermography to check for excessing overheating, as well as for the absence of discharge.
A «tailor-made» consultancy service
Backed by experience in the production of special ladders, Frigerio can produce customised and equipped ladders; batches conforming to standards or specifications of national electrical Bodies. On request ladders are supplied for operations at high voltages up to 36 kV, in compliance with CEI EN 61478. The cost of certification (obligatory for every supply) is quantified from time to time.
CEI EN 505281000Vac - 1500Vdc
5 YEARS
FRIGERIO WARRANTY
3,000,000Damage to property and persons
PRODUCTINSURANCE
Frigerio fibreglass ladders, , increase the safety for those working in the non-conductors of electricityelectrical installations sector in general.
The use of insulating ladders in the vicinity of electrical installations and in compliance with the indications in the supplied (Risk assessment), satisfies the safety criteria in Warnings for use booklet accordance with . and the rungs-upright connections have been tested according to L.D.Lgs. 81CEI-EN-50528 CEI-EN-61478 (for voltages up to 1000V AC and 1500 DC) and according to (category 1 - for voltages up to 36,000 V).
The resistance to rusting and complete resistance to atmospheric agents, in addition to chemical erosion, also allow use in the presence of many products and chemical agents.
The complete of fibreglass ladders makes it possible to work at heights up to 14 m, but for new rangeyour special needs, Frigerio will make any type of ladder to order.
Fibreglass uprights and aluminium steps
Professional fibreglass ladders
122 The photographs and illustrations in this catalogue are not binding. The technical specifications of the articles may be liable to improvements without prior notice.
Fibr
egla
ss la
dder
s
Professional fibreglass ladders
SCA V033 /02SCA V033 /03SCA V033 /04
0.560.811.06
0.480.710.95
Ladder length
m
Spread
m
Trestle height
m
Weight
kg
0.580.780.97
6.67.28.6
EN 14183EN 14183EN 14183
Standards
150150150
Capacity
kg
Code V033« Aluminium step 90 mm deep
« Steps with non-slip surface
« Sturdy hinge made of galvanised steel
« Aluminium shelf, 200 x 300 mm
« Feet made of non-slip synthetic material
« Fibreglass upright, 95 mm
« Reinforcement at ends
« Ladder inclination 68°
« Automatic aluminium safety spreader bars to prevent accidental spreading and closure
« Packed in heat-shrink wrapping
« Instruction booklet and rules for use
Double-sided folding stepladder
Code V015« Aluminium step 90 mm deep
« Steps with non-slip surface
« Knee guard, 50 cm
« Sturdy hinge made of galvanised steel
« Aluminium shelf, 200 x 300 mm
« Foot made of anti-slip synthetic material
« Fibreglass upright, 95 mm
« Reinforced lower section for a more rigid base
« Ladder inclination 68°
« Automatic aluminium safety spreader bars to prevent accidental spreading and closure
« Packed in heat-shrink wrapping
« Instruction booklet and rules for use
Double-sided trestle ladder with knee guard
464953
Ladder width
cm
SCA V015 /05SCA V015 /06
1.752.00
1.621.85
Ladder length
m
Spread
m
Trestle height
m
Weight
kg
1.491.67
11.013.0
EN 131EN 131
Standards
150150
Capacity
kg
5053
Ladder width
cm
SCA V015 /07SCA V015 /08SCA V015 /10
2.252.503.00
2.082.322.78
1.852.042.40
15.017.021.5
EN 131EN 131EN 131
150150150
555863
Galvanised steel hinge with 200x300 mm shelf
Foot made of anti-slip synthetic material.
Foot made of anti-slip synthetic material.
Aluminium step 90 mm deep.
Automatic aluminium spreader bars
90 mm wide step.
Price
Euros
220.00268.00317.00364.00459.00
Price
Euros
119.00146.00181.00
123Recommended retail prices - VAT excluded.
STANDARDS
EN 131
150 kg
5 yearsCAPACITYWARRANTY
150 kg
5 yearsCAPACITYWARRANTY
CEI EN 61478on request
36.000 V
CEI EN 61478on request
36.000 V
Article code
Article code
STANDARDS
CEI EN 505281000Vac - 1500Vdc
CEI EN 505281000Vac - 1500Vdc
EN 14183
3,000,000Damage to property and persons
3,000,000Damage to property and persons
100%100%100%
Galvanised steel hinge with 200x300 mm shelf.
Automatic aluminium spreader bars.
PRODUCTINSURANCE
PRODUCTINSURANCE
Fibr
egla
ss la
dder
s
Code V025« Aluminium step 90 mm deep
« Steps with non-slip surface
« Sturdy hinge made of galvanised steel
« Aluminium shelf. 200 x 300 mm
« Fibreglass upright. 95 mm
« Knee guard, 50 cm
« Aluminium double platform, 560 x 290
« Safety strap to prevent the ladder from spreading apart
« Reinforced lower section for a more rigid base
« Ladder inclination 68°
« Foot made of anti-slip synthetic material
« Packed in heat-shrink wrapping
Two-sided trestle ladder with knee guard and double platform
Code V026« Aluminium step 90 mm deep
« Steps with non-slip surface
« Fibreglass upright, 95 mm
« Aluminium platform, 290 x 260 mm
« Aluminium tray for objects
« Safety strap to prevent the ladder from spreading apart
« Regulatory safety railing 70 cm high
« Reinforced lower section for a more rigid base
« Feet made of anti-slip synthetic material
« Ladder inclination 68°
« Packed in heat-shrink wrapping
« Instruction booklet and rules for use
Trestle ladder with safety railing and aluminium platform
SCA V026 /04SCA V026 /05SCA V026 /06
1.752.002.25
0.931.161.40
2.933.163.40
Useful working height
m
Ladder length
m
Spread
m
Platform height
m
Weight
kg
0.881.031.19
6.07.59.5
EN 131EN 131EN 131
Standards
150150150
Capacity
kg
485053
Ladderwidth
cm
SCA V026 /07SCA V026 /08SCA V026 /09
2.502.753.00
1.631.862.10
3.633.864.10
1.341.491.65
11.513.515.5
EN 131EN 131EN 131
150150150
565861
SCA V025 /05SCA V025 /06SCA V025 /07
1.752.002.25
1.161.401.64
3.163.403.64
Useful working height
m
Ladder length
m
Spread
m
Platform height
m
Weight
kg
1.491.671.85
12.014.016.0
D.L. 81D.L. 81D.L. 81
Standards
150150150
Capacity
kg
505355
Ladderwidth
cm
SCA V025 /08SCA V025 /10
2.503.00
1.882.36
3.884.36
2.042.40
18.022.5
D.L. 81D.L. 81
150150
5863
Double platform hooking device.
Aluminium double platform, 560 x 290 mm.
Aluminium platform with safety railing.
Foot made of anti-slip synthetic material.
Double platform hooking device.
Foot made of anti-slip synthetic material.
Professional fibreglass ladders
Price
Euros
171.00185.00208.00247.00265.00289.00
Price
Euros
238.00284.00333.00382.00477.00
124 The photographs and illustrations in this catalogue are not binding. The technical specifications of the articles may be liable to improvements without prior notice.
STANDARDS
D.L. 81
150 kg
5 yearsCAPACITYWARRANTY
STANDARDS
EN 131
150 kg
5 yearsCAPACITYWARRANTY
CEI EN 61478on request
36.000 V
CEI EN 61478on request
36.000 V
Article code
Article code
CEI EN 505281000Vac - 1500Vdc
CEI EN 505281000Vac - 1500Vdc
3,000,000Damage to property and persons
3,000,000Damage to property and persons
100%100%100%
Galvanised steel hinge with 200 x 300 mm shelf.
Aluminium tray for objects.
PRODUCTINSURANCE
PRODUCTINSURANCE
Fibr
egla
ss la
dder
s
Code V016« Aluminium step 90 mm deep
« Steps with non-slip surface
« Fibreglass upright, 95 mm
« Ladder inclination 68°
« Automatic aluminium safety spreader bars
« Aluminium tray for objects
« Reinforced lower section for a more rigid base
« Feet made of anti-slip synthetic material
« Packed in heat-shrink wrapping
« Instruction booklet and rules for use
Trestle ladder with tool tray
Code V080« 30 x 30 mm square-section non-slip
aluminium rung
« Rung-upright connection with double edging, inside and outside the vertical upright
« Larger upright for all sizes
« Anti-slip caps placed at the ends
« Reinforced lower sections
« Packed in heat-shrink wrapping
« Instruction booklet and rules for use
Simple lean-on ladder with rungs
SCA V080 /06SCA V080 /08SCA V080 /10
1.992.523.08
1.882.412.97
Ladder length
m
Lean-on heigth
m
Weight
kg
3.85.06.2
EN 131EN 131EN 131
Standards
150150150
Capacity
kg
383838
Ladder width
cm
SCA V080 /12SCA V080 /14
3.644.20
3.534.09
7.59.3
EN 131EN 131
150150
3838
SCA V016 /06SCA V016 /08
1.522.02
1.411.87
Ladder length
m
Spread
m
Ladder height
m
Weight
kg
1.051.36
6.89.4
EN 131EN 131
Standards
150150
Capacity
kg
4651
Ladder width
cm
SCA V016 /10SCA V016 /12
2.523.02
2.332.80
1.671.98
11.814.2
EN 131EN 131
150150
5661
58 x 2558 x 2558 x 25
Upright
mm
58 x 2558 x 25
Rung-upright connection with double edging.
Foot made of anti-slip synthetic material.
90 mm wide step.
Aluminium bar to prevent opening.
Professional fibreglass ladders
Price
Euros
82.00109.00134.00161.00196.00
Price
Euros
176.00233.00289.00353.00
125Recommended retail prices - VAT excluded.
STANDARDS
EN 131
150 kg
5 yearsCAPACITYWARRANTY
150 kg
5 yearsCAPACITYWARRANTY
STANDARDS
EN 131
CEI EN 61478on request
36.000 V
CEI EN 61478on request
36.000 V
Article code
Article code
CEI EN 505281000Vac - 1500Vdc
CEI EN 505281000Vac - 1500Vdc
3,000,000Damage to property and persons
3,000,000Damage to property and persons
100%100%100%
Aluminium tray for objects.
PRODUCTINSURANCE
PRODUCTINSURANCE
Fibr
egla
ss la
dder
s
Code V691
All-purpose extension ladder with two sections
Code V045
All-purpose ladder with two sections - With stabiliser base
SCA V045Z/08SCA V045Z/10SCA V045Z/12SCA V045Z/14
SCA V691 /06SCA V691 /08SCA V691 /10
1.962.523.08
1.892.422.96
Trestle height
m
Closed length
m
Weight
kg
9.512.014.9
D.L. 81D.L. 81D.L. 81
Standards
150150150
Capacity
kg
38/4538/4538/45
st nd 1 – 2Width
cm
« 30 x 30 mm square-section non-slip aluminium rung
« Rung-upright connection with double edging on inside and outside of vertical upright
« Extendable sections locked in place by means of steel anti-extension hooks
« End caps made of anti-slip synthetic material
« Nylon safety strap to prevent the ladder from spreading apart
« Non-slip balancing feet with protective steel boxed frame upright
« Reinforced lower sections
« Packed in heat-shrink wrapping
« Instruction booklet and rules for use
« 30 x 30 mm square-section non-slip aluminium rung
« Rung-upright connection with double edging, inside and outside the vertical upright
« Extendable sections lock into place by means of automatic steel anti-extension hooks with anti-decoupling safety
« Anti-slip caps placed at the ends
« Aluminium safety spreader bars to prevent closing
« Nylon safety strap to prevent the ladder from spreading apart
« Aluminium base stabiliser with protective boxed frame and non-deformable calibrated coupling
« Reinforced lower sections
« Packed in heat-shrink wrapping
« Instruction booklet and rules for use
58 x 2558 x 2578 x 25
Upright
mm
Rung-upright connection with double edging.
Rung-upright connection with double edging.
Non-slip balancing foot with protective boxed frame upright.
Steel anti-extension device with automatic blocking.
Steel anti-extension device with automatic blocking.
Removable stabiliser base with protective boxed frame and non-deformable calibrated coupling.
Sturdy hinge made of gravity die-cast aluminium.
Professional fibreglass ladders
Price
Euros
311.00379.00447.00487.00
Price
Euros
196.00248.00333.00
Sturdy hinge made of gravity die-cast aluminium.
126 The photographs and illustrations in this catalogue are not binding. The technical specifications of the articles may be liable to improvements without prior notice.
STANDARDS
D.L. 81
150 kg
5 yearsCAPACITYWARRANTY
150 kg
5 yearsCAPACITYWARRANTY
CEI EN 61478on request
36.000 V
CEI EN 61478on request
36.000 V
CEI EN 505281000Vac - 1500Vdc
CEI EN 505281000Vac - 1500Vdc
Article code
Article code
STANDARDS
EN 131
2.422.98
2.292.82
Trestle height
m
Closed length
m
Weight
kg
13.115.6
EN 131EN 131
Standards
150150
Capacity
kg
38/4538/45
st nd 1 – 2Width
cm
3.544.10
3.353.89
23.427.0
EN 131EN 131
150150
38/4538/45
78 x 2578 x 25
Upright
mm
78 x 2578 x 25
3.824.94
Extended Length
m
6.066.90
3.084.205.04
Extended Length
m
3,000,000Damage to property and persons
3,000,000Damage to property and persons
100%100%100%
ACCESSORIES
See page 124
- Telescopic levelling base
- Base with levelling screw
- Base with wheels
PRODUCTINSURANCE
PRODUCTINSURANCE
Fibr
egla
ss la
dder
s
Code V046
Extension ladder with two sections - Manually extendable - Modular
Code V047
All-purpose ladder with three sections - With base stabiliser - Modular
SCA V047Z /08
SCA V047Z /10SCA V047Z /11SCA V047 /12
« 30 x 30 mm square-section non-slip aluminium rung
« Rung-upright connection with double edging, inside and outside the vertical upright
« Extendable sections lock into place by means of automatic steel anti-extension hooks with anti-decoupling safety
« Each extendable section can be used as lean-on ladder
« Anti-slip caps placed at the ends
« Non-slip balancing feet with protective steel boxed frame upright
« Packed in heat-shrink wrapping
« Instruction booklet and rules for use
« 30 x 30 mm square-section non-slip aluminium rung
« Rung-upright connection with double edging, inside and outside the vertical upright
« Extendable sections lock into place by means of automatic steel anti-extension hooks with anti-decoupling safety
« Extendable last section provided with wheels for sliding along wall
« Anti-slip caps placed at the ends
« Aluminium spreader bars to prevent closing
« Nylon safety strap to prevent the ladder from spreading apart
« Aluminium base stabiliser with protective boxed frame and non-deformable calibrated coupling
« Packed in heat-shrink wrapping
« Instruction booklet and rules for use
SCA V046 /06SCA V046 /08SCA V046 /10
1.962.523.08
3.084.205.04
Closed length
m
Extended length
m
Weight
kg
9.311.714.1
EN 131EN 131EN 131
Standards
150150150
Capacity
kg
38/4538/4538/45
st nd 1 – 2Width
cm
SCA V046 /12SCA V046 /14SCA V046 /16
3.654.214.77
6.457.588.69
21.424.536.8
EN 131EN 131EN 131
150150150
38/4538/4538/45
SCA V046 /18 5.33 9.81 41.0EN 131 150 38/45
58 x 2558 x 2578 x 25
Upright
mm
78 x 2578 x 2595 x 2595 x 25
Rung-upright connection with double edging.
Non-slip balancing foot with protective boxed frame upright.
Steel anti-extension device with automatic blocking.
Rung-upright connection with double edging.
Steel anti-extension device with automatic blocking.
Professional fibreglass ladders
Price
Euros
518.00
562.00617.00823.00
Price
Euros
257.00293.00310.00364.00420.00591.00662.00
Sturdy hinge made of gravity die-cast aluminium.
127Recommended retail prices - VAT excluded.
150 kg
5 yearsCAPACITYWARRANTY
150 kg
5 yearsCAPACITYWARRANTY
STANDARDS
EN 131
CEI EN 61478on request
36.000 V
Removable stabiliser base with protective boxed frame and non-deformable calibrated coupling.
CEI EN 505281000Vac - 1500Vdc
Article code
Article code
CEI EN 61478on request
36.000 V
CEI EN 505281000Vac - 1500Vdc
2.48
3.04
5.56
6.96
Closed length
m
Extended length
m
Weight
kg
21.4
31.0
EN 131
EN 131
Standards
150
150
Capacity
kg
38/45/52
38/45/52
st nd rd1 - 2 - 3 Width
cm
3.323.60
8.089.20
36.042.0
EN 131EN 131
150150
38/45/5238/45/52
78 x 25
78 x 25
Upright
mm
78 x 2595 x 25
2.28
2.80
Trestle height
m
3.073.32
SCA V047 /14 921.004.16 10.60 45.0EN 131 150 38/45/5295 x 25 3.86
SCA V047Z /09 548.002.76 6.12 27.0EN 131 150 38/45/5278 x 25 2.54
STANDARDS
EN 131
Certified Certified EN 131 EN 131
with extension with extension up to 9.81 mup to 9.81 m
WITHOUT using WITHOUT using section-dividers!section-dividers!
Certified EN 131
with extension up to 9.81 m
WITHOUT using section-dividers!
EN 131 certified with extensionEN 131 certified with extension up to 9.25 m WITHOUT up to 9.25 m WITHOUT using section-dividers!using section-dividers!
EN 131 certified with extension up to 9.25 m WITHOUT using section-dividers!
3,000,000Damage to property and persons
3,000,000Damage to property and persons
100%100%100%
ACCESSORIES
See page 124
- Telescopic levelling base
- Base with levelling screw
- Base with wheels
PRODUCTINSURANCE
PRODUCTINSURANCE
Fibr
egla
ss la
dder
s
Code V048
Extension ladder with three sections - Manually extendable - Modular
Code V051
Extension ladder with two sections - Can be extended with rope
« 30 x 30 mm square-section non-slip aluminium rung
« Rung-upright connection with double edging, inside and outside the vertical upright
« Extendable sections lock into place by means of automatic steel anti-extension hooks with anti-decoupling safety
« Anti-slip caps placed at the ends
« End with wheels for sliding along walls
« Each extendable section can be used as lean-on ladder
« Non-slip balancing feet with protective steel boxed frame upright
« Non-slip balancing feet with protective steel boxed frame upright
« Instruction booklet and rules for use
SCA V048 /08SCA V048 /10SCA V048 /12
2.533.093.65
5.897.299.25
Closed length
m
Extended Length
m
Weight
kg
18.127.538.8
EN 131EN 131EN 131
Standards
150150150
Capacity
kg
SCA V048 /14 4.21 10.93 45.7EN 131 150
SCA V051 /12SCA V051 /14
3.674.23
6.477.59
Closed length
m
Extended Length
m
Weight
kg
22.424.0
EN 131EN 131
Standards
150150
Capacity
kg
SCA V051 /16SCA V051 /18SCA V051 /20
4.795.355.91
8.719.83
10.95
36.040.542.3
EN 131EN 131D.L. 81
150150100
SCA V051 /22 6.47 11.79 44.0D.L. 81 100
« 30 x 30 mm square-section non-slip aluminium rung
« Rung-upright connection with double edging, inside and outside the vertical upright
« Sections locked in place by means of automatic die-cast aluminium outrigger with single rope
« Anti-slip caps placed at the ends
« End with wheels for sliding along walls
« Height adjustable by means of extension mechanism with rope made of synthetic material
« Non-slip balancing feet with protective steel boxed frame upright
« Packed in heat-shrink wrapping
« Instruction booklet and rules for use
st nd rd1 - 2 - 3 Width
cm
st nd 1 – 2Width
cm
38/45/5238/45/5238/45/5238/45/52
38/4538/4538/4538/4538/4538/45
78 x 2578 x 2595 x 25
Upright
mm
95 x 25
78 x 2578 x 25
Upright
mm
95 x 2595 x 2595 x 2595 x 25
Automatic outrigger for locking the sections.
Rung-upright connection with double edging.
Non-slip balancing foot with protective boxed frame upright.
Steel anti-extension device with automatic locking.
Rung-upright connection with double edging.
Non-slip balancing foot with protective boxed frame upright.
Professional fibreglass ladders
Price
Euros
423.00480.00646.00719.00757.00802.00
Price
Euros
389.00459.00723.00795.00
128 The photographs and illustrations in this catalogue are not binding. The technical specifications of the articles may be liable to improvements without prior notice.
150 kg
5 yearsCAPACITYWARRANTY
150 kg
5 yearsCAPACITYWARRANTY
CEI EN 61478on request
36.000 V
CEI EN 61478on request
36.000 V
CEI EN 505281000Vac - 1500Vdc
CEI EN 505281000Vac - 1500Vdc
Article code
Article code
STANDARDS
EN 131D.L. 81
STANDARDS
EN 131
EN 131 EN 131 certified certified
with extension with extension up to 10.93 mup to 10.93 m
WITHOUT using WITHOUT using section-dividers!section-dividers!
EN 131 certified
with extension up to 10.93 m
WITHOUT using section-dividers!
EN 131 EN 131 certified certified
with extension with extension up to 9.83 mup to 9.83 m
WITHOUT using WITHOUT using section-dividers!section-dividers!
EN 131 certified
with extension up to 9.83 m
WITHOUT using section-dividers!
3,000,000Damage to property and persons
3,000,000Damage to property and persons
100%100%100%
PRODUCTINSURANCE
PRODUCTINSURANCE
Fibr
egla
ss la
dder
s
Code V060
Extension ladder with three sections - Extendable with rope
SCA V060 /10SCA V060 /12SCA V060 /14
3.67
Peso
kg.
EN 131EN 131EN 131
Normative
150150150
SCA V060 /16SCA V060 /18
3.11
4.23
7.599.27
10.95
Closed length
m
Extended Length
m
Weight
kg
27.442.349.2
Standards
Capacity
kg
38/45/5238/45/5238/45/52
st nd rd1 - 2 - 3 Width
cm
4.795.35
12.6314.31
50.663.3
D.L. 81D.L. 81
100100
38/45/5238/45/52
« 30 x 30 square-section non-slip aluminium rung
« Rung-upright connection with double edging, inside and outside the vertical upright
« Height adjustable by means of extension mechanism with rope made of long lasting synthetic material
« Extendable sections locked in place by means of die-cast aluminium automatic outrigger with single rope
« Possibility of extending the two upper sections simultaneously
« Last section adjustable with manual extension and fitted with wheels for sliding along wall
« Article SCA V060/18 equipped with ladder stabiliser in the first section included in the price
« Caps at the ends with non-slip surfaces
« Non-slip balancing feet which adapt independently to the slope of the ground with protective boxed frame upright
« Packed in heat-shrink wrapping
« Year of manufacture and Manufacturer's brand
« Instruction booklet and rules for use
95 x 2578 x 25
95 x 25
Upright
mm
95 x 2595 x 25
Rung-upright connection with double edging, internal and external.
Non-slip balancing foot with protective boxed frame upright.
Steel hook for anti-extension of sections with automatic blocking.
Automatic die-cast aluminium outrigger for blocking the sections.
Professional fibreglass ladders
Price
Euros
703.00780.00844.00934.00
1,144.00
129Recommended retail prices - VAT excluded.
150 kg
5 years
CAPACITY
WARRANTY
CEI EN 61478on request
36.000 V
Article code
------
Section-dividers included
Yes/No
NoYes
An equipped lean-on ladder, ideal for working at great heights, and equipped with mechanism for extension of the sections with safe and practical rope and balancing feet.
Extension in three sections compared to extension in two sections makes it possible to reach greater heights, keeping the transport dimensions unchanged.
CEI EN 505281000Vac - 1500Vdc
STANDARDS
EN 131D.L. 81
EN 131 certifiedEN 131 certifiedwith extension with extension up to 10.95 mup to 10.95 m
WITHOUT WITHOUT using using
section-dividers!section-dividers!
EN 131 certifiedwith extension up to 10.95 m
WITHOUT using
section-dividers!
3,000,000Damage to property and persons
100%100%100%
PRODUCTINSURANCE
Fibr
egla
ss la
dder
s
Code 3045V - 3045ZV
All-purpose ladder in two sections - With stabiliser base - Use on uneven ground
« 3045V Multipurpose ladder with device for use on uneven ground on steps and on very irregular surfaces (up to model 3045Z/14V)
« 30 x 30 mm square-section non-slip aluminium rungnd
« Insulating fibreglass upright 2 section
« Rung-upright connection with double edging. inside and outside the vertical upright
« Extendable sections lock into place by means of automatic steel anti-extension hooks with anti-decoupling safety
« Aluminium safety spreader bars to prevent closing
« Nylon safety strap to prevent the ladder from spreading apart
« Anti-slip caps placed at the ends
« Aluminium stabiliser base with non-deformable calibrated coupling
« Gravity die-castings in aluminium ensure greater hold under strain and greater impact resistance
« Packed in heat-shrink wrapping
« Year of manufacture and Manufacturer's brand
« Instruction booklet and rules for use
SCA 3045Z/08VSCA 3045Z/10V
2.422.98
3.824.94
Closed length
m
Base width
m
Extended Length
m
Weight
kg
0.900.90
12.518.0
38/4538/45
st nd 1 – 2Width
cm
SCA 3045Z/12VSCA 3045Z/14V
3.544.10
6.066.90
1.001.10
21.024.0
38/4538/45
Code 3047V - 3047ZV
All-purpose ladder in three sections with rungs - Base - Modular - Use on uneven surfaces
« 3047V Multipurpose ladder with device for use on uneven surfaces on steps and on very irregular surfaces (up to model 3047Z/10V)
« 30 x 30 mm square-section non-slip aluminium rung
« Insulating fibreglass upright 3°section
« Rung-upright connection with double edging, on inside and outside of vertical upright
« Last section fitted with wheels for sliding along the walls and useable as lean-on ladder
« Extendable sections lock into place by means of automatic steel anti-extension hooks with anti-decoupling safety
« Aluminium safety spreader bars to prevent closing
« Nylon safety strap to prevent the ladder from spreading apart
« Non-slip caps placed at the ends of the ladder
« Aluminium stabiliser base with non-deformable calibrated coupling
« Gravity die-castings in aluminium ensure greater hold under strain and greater impact resistance
« Packed in heat-shrink wrapping
« Year of manufacture and Manufacturer's brand
« Instruction booklet and rules for use
SCA 3047Z/08VSCA 3047Z/10V
2.483.04
5.566.96
Closed length
m
Base width
m
Extended Length
m
Weight
kg
1.001.00
23.526.5
38/45/5238/45/52
st nd rd1 - 2 - 3 Width
cm
SCA 3047 /12VSCA 3047 /14V
3.604.16
9.2010.60
1.101.10
39.045.0
38/45/5238/45/52
Mixed professional ladders
Price
Euros
358.00465.00585.00717.00
Price
Euros
291.00332.00397.00538.00
130 The photographs and illustrations in this catalogue are not binding. The technical specifications of the articles may be liable to improvements without prior notice.
STANDARDS
D.L. 81
STANDARDS
D.L. 81
insulation tested
1000 V
insulation tested
1000 V
Article code
Article code
150 kg
5 years
CAPACITY
WARRANTY
150 kg
5 years
CAPACITY
WARRANTY
EN 131certification available
on request
EN 131certification available
on request
3,000,000Damage to property and persons
3,000,000Damage to property and persons
100%100%100%
2.282.80
Trestle height
m
3.323.86
2.292.82
Trestle height
m
3.353.89
PRODUCTINSURANCE
PRODUCTINSURANCE
Fibr
egla
ss la
dder
s
Code 3051 V
Scala a sfilo in due tronchi a pioli - Allungabile con fune
« 30 x 30 mm square-section non-slip aluminium rung nd
« Fibreglass upright 2 section
« Rung-upright connection with double edging, on inside and outside of vertical upright
« Height adjustable by means of extension mechanism with rope made of long lasting synthetic material
« Extendable sections locked in place by means of die-cast aluminium automatic outrigger with single rope
« End with wheels for sliding along walls
« Non-slip balancing feet with protective steel boxed frame upright
« Packed in heat-shrink wrapping
« Year of manufacture and Manufacturer's brand
« Instruction booklet and rules for use
SCA 3051 /12VSCA 3051 /14V
3,674,23
6,477,88
Lunghezza chiusa
mt.
Lunghezza sviluppata
mt.
Peso
kg.
21,023,0
38/4538/45
Larghezza 1°- 2°
cm.
SCA 3051 /16VSCA 3051 /18V
4,795,35
8,719,83
35,038,0
38/4538/45
Code 3060 V
Scala a sfilo in tre tronchi a pioli - Allungabile con fune
« 30 x 30 mm square-section non-slip aluminium rung rd
« Insulating fibreglass upright 3 section
« Rung-upright connection with double edging, on inside and outside of vertical upright
« Height adjustable by means of extension mechanism with rope made of long lasting synthetic material
« Extendable sections locked in place by means of die-cast aluminium automatic outrigger with single rope
« Possibility of extending the two upper sections simultaneously
« Last adjustable section with manual extension and fitted with wheels for sliding along wall
« Articles SCA 3060/18V and SCA 3060/20V are provided with ladder stabiliser in the first section included in the price
« Non-slip balancing feet with protective steel boxed frame upright
« Packed in heat-shrink wrapping
« Year of manufacture and Manufacturer's brand
« Instruction booklet and rules for use
SCA 3051 /20V 5,91 10,95 42,038/45
SCA 3060 /10VSCA 3060 /12VSCA 3060 /14V
3,083,644,20
7,298,97
10,65
Lunghezza chiusa
mt.
Lunghezza sviluppata
mt.
Peso
kg.
25,537,542,5
38/45/5238/45/5238/45/52
Larghezza 1°- 2°- 3°
cm.
SCA 3060 /16VSCA 3060 /18V
4,765,32
12,0513,73
48,057,0
38/45/5238/45/52
SCA 3051 /22V 6,47 12,08 45,038/45
SCA 3060 /20V 5,88 15,41 63,038/45/52
78 x 2578 x 25
Montante
mm.
95 x 2595 x 25R95 x 25R
78 x 2595 x 2595 x 25
Montante
mm.
95 x 2595 x 25R
95 x 25R
95 x 25R
Scale professionali miste
Prezzo
Euro
489,00598,00737,00829,00
1.060,00
Prezzo
Euro
386,00434,00555,00614,00671,00
1.128,00
720,00
123Recommended retail prices - VAT excluded.
NORMATIVE
D.L. 81
150 kg
5 anni
PORTATA
GARANZIA
NORMATIVE
D.L. 81
Sca
le in
vet
rore
sina
insulation tested
1000 V
insulation tested
1000 V
CodiceArticolo
150 kg
5 anni
PORTATA
GARANZIA
EN 131 certification available
on request
EN 131 certification available
on request
CodiceArticolo
3.000.000Danni a cose e persone
3.000.000Danni a cose e persone
100%100%100%
Extension ladder with two sections - Can be extended with rope
SCA 3051 /12VSCA 3051 /14V
3.674.23
6.477.88
Closed weight
m
Lengthextended
m
Weight
kg
21.023.0
38/4538/45
st nd 1 – 2Width
cm
SCA 3051 /16VSCA 3051 /18V
4.795.35
8.719.83
35.038.0
38/4538/45
Extension ladder with three sections - Extendable with rope
SCA 3051 /20V 5.91 10.95 42.038/45
SCA 3060 /10VSCA 3060 /12VSCA 3060 /14V
3.083.644.20
7.298.97
10.65
Closed weight
m
Lengthextended
m
Weight
kg
25.537.542.5
38/45/5238/45/5238/45/52
st nd rd1 - 2 - 3 Width
cm
SCA 3060 /16VSCA 3060 /18V
4.765.32
12.0513.73
48.057.0
38/45/5238/45/52
SCA 3051 /22V 6.47 12.08 45.038/45
SCA 3060 /20V 5.88 15.41 63.038/45/52
78 x 2578 x 25
Upright
mm
95 x 2595 x 25R95 x 25R
78 x 2595 x 2595 x 25
Upright
mm
95 x 2595 x 25R
95 x 25R
95 x 25R
Mixed professional ladders
Price
Euros
489.00598.00737.00829.00
1,060.00
Price
Euros
386.00434.00555.00614.00671.00
1,128.00
720.00
131
STANDARDS
D.L. 81
150 kg
5 years
CAPACITY
WARRANTY
STANDARDS
D.L. 81insulation tested
1000 V
insulation tested
1000 V
Article code
150 kg
5 years
CAPACITY
WARRANTY
Article code
3,000,000Damage to property and persons
3,000,000Damage to property and persons
100%100%100%
PRODUCTINSURANCE
PRODUCTINSURANCE
Fibr
egla
ss la
dder
s
132
ACCESSORIES for professional fibre glass and mixed ladders
Telescopic ladder stabiliser
st1 section ladder stabiliser
Anchoring hooks
Clamp
Can be applied to all rung ladders, allows length adjustment from 85 to 105 cm.Functions as section dividers reducing oscillation of the ladder when climbing.
Double bracket with central pin and rubber feet for resting on the ground.Can be applied to all rung ladders and functions as section dividers in the first section, reducing oscillation of the ladder when climbing.
Made of galvanised steel, can be applied to all ladder by means of through screw. The special hook shape allows safe hooking with the fixed part.
Designed for connection of two suspended rung ladder sections.The screw clamp tightens two rungs together to firmly block two extendable sections to one another.
Section-divider spacer
Made of aluminium with non-slip surface, used as a platform for resting the feet, or for placing tools on rung ladders. Can be applied to every rung of the ladder on the inside or outside.
Applied to the rungs of the last section of the ladder leaning against a vertical wall. In the terminal position the ladder can be positioned away from the wall to be able to work under gutters. In the intermediate position, acts as ladder stabiliser.
SCC DU Size 2 m price SCC DR Size 4 m price
SCC RU Price
SCP RT Price
SCC GA Price x 1 € 17.00
€ 130,00
€ 124.00
€ 152.00€ 114.00
SCC MB Price € 51.00
25°10°
200
Landing platform
SCC PR Price € 70.00
Base with levelling screw
Can be applied to all ladders already fitted with base stabiliser. The double levelling screw with swivel foot suits all types of surfaces and allows levelling by adjusting the screw up to 25 cm or for 25° slopes.
SCC BLIS Supplement € 80.00
ATTENTION: In most cases the accessory must be ordered together with the ladder.
The photographs and illustrations in this catalogue are not binding. The technical specifications of the articles may be liable to improvements without prior notice.
Fibr
egla
ss la
dder
s
Levelling Screw
Made of galvanised steel with swivel feet, allows telescopic screw adjustment to compensate slopes or level differences up to 25 cm
Pole support
Device with rollers applicable to all ladders with rungs. Makes it possible to set the ladder in safety when used leaning against a vertical pole. (Optional anchoring by means of belt with tensioner Art. SL25)
SCC AP Price € 110.00 SCC LR Price x 1 € 113.00
Allows easy and safe anchoring to the fixed part. The tensioner makes adjustment easier and ensures the grip. Applied to the ladder by means ofeyelet - snap hook connection.
Anchoring belt
SCC SL25 Price € 60.00
Swivel foot
Applicable to all ladders with rungs.The foot articulated with protective boxed frame upright. Adapts to the slope of the ground, and always ensures maximum anti-slip hold on the surface.
SCC PB x rungs € 17.00
SCC PB+S x step € 40.00
Can be applied to all rung ladders with two or three sections.Conforms to UNI EN 131, allows automatic blocking of the sections. Available if an existing one is to be replaced.
Telescopic levelling baseCan be applied to all ladders already fitted with stabiliser base. The swallow tail shape makes it possible to use the ladder on any kind of ground and the telescopic extension allows reduction of the transport dimensions and to compensate slopes and level differences up to 8 cm.in height or 4° in inclination.
SCC BLTS Supplement € 42.00
Can be applied to all ladders with stabiliser base. On inclining the ladder by 20° the wheels rest on the ground so that the ladder can be transported easily and effortlessly. Particularly suitable for long or heavy ladders.
SCC BLSR Supplement € 30.00
Levelling base with wheels
Ladder sections anti-extension
SCC DA Price X 1 € 5.00
