FibranCatalog.pdf
description
Transcript of FibranCatalog.pdf
Insulation Products Catalog
Geolan
FibranEco
FibranXpe
4 - 9
10 - 14
15
Index
FIBRAN was founded in 1974 in
Thessaloniki by its current Chairman
Mr. Dimitrios Anastasiadis having as its
major activity initially the production of
prefabricated elements and their
application in settlements in Greece
and abroad.
In November of 1995, in a highly
advanced industrial unit at Terpni -
Serres, FIBRAN SA starts its production
of thermoinsulating building elements
of extruded polystyrene, under the
trade name FIBRAN XPS.
In June 1998 a second production line
is being established while in January
2000 a new double production line for
expanded polyethylene and extruded
polystyrene has been put into
operation, producing materials
addressed to sound insulation,
thermoinsulation and packaging. The
total production capacity rose up to
320.000m3 annually and FIBRAN has
been placed among the biggest
European producers.
In 1999 FIBRAN takes over its
subsidiary BIMO together with its
subsidiary in Athens IZOTEC SA
distribute throughout Greece a big
series of products consisting of
thermoinsulating products, sound
insulating, waterproofing materials,
falce ceilings, concrete admixtures,
repairing materials and geosynthetics.
In September of 2001 FIBRAN initiates
a new industrial unit for the production
of stonewool materials, covering a total
area of 11000m2 in Terpni Serres. The
unit, unique in Greece, has an annual
capacity of 30.000 tn. The production
process involves the fusion of minerals
in electric twin ovens. This highly
advanced unit belongs to the few units
worldwide that ows equipment in the
peak of technology, totally friendly to
the environment.
Stonewool materials are used for
thermoinsulation, soundinsulation, fire
protection in the building sector and by
the industry, shipbuilding and
agriculture. The products are specified
to cover demands both in Greece and
a b r o a d .
Additionally, a new line of production
of extruded polystyrene foam boards
has been completed and put into
operation in Portugal. The factory is
located in Porto, occupies 40 people,
with capacity of 120.000m3 of extruded
polystyrene products and will cover
mostly the markets of Iberian peninsula
and France.
Moreover, until the end of 2003 a new
investment in Boulgaria is expected to
be finalized. The new factory of
extruded polystyrene foam boards is
being established in Russe and will
cover the demands of Bulgaria,
Romania, Ukraina, Moldavia and Russia.
During the first two months of 2003
a new investment in FYROM is also
expected to be completed. The new
factory in Strumica, has as its major
activity the production of expanded
p o l y s t y r e n e .
3
B-040Geolan
Low Weigh t Boa rds
Geolan B-04 0 Low Weight Boards
The Low weight boards ofstonewool could be used inCavity walls, dry constructions,roofs, and false ceilings.
D e n s i t y
T h i c k n e s s
Board dimensions:
Fire Performance:
Operation Temperature (0C ) :
Thermal Conductivity:
Ú = 40 kg / m3
30 – 40 – 50 – 60 – 80 mm
1200 x 600 mm
A 1
750 0C
Ï = 0.0327 W / m*K
B-050Geolan
Med ium Weight Boa rds
Geolan B-05 0 M edium Weight Boa rds
Medium Weight Boards could beused in Cavity walls, Ventilatedfacades, dry constructions, roofs.
D e n s i t y
T h i c k n e s s
Board dimensions:
Fire Performance:
Operation Temperature (0C ) :
Thermal Conductivity:
Ú = 50 kg / m3
30 – 40 – 50 – 60 – 80 mm
1200 x 600 mm
A 1
750 0C
Ï = 0.0327 W / m*K
4
B-570Geolan
Semi Rig id Boards
Geolan B-570 Semi R ig id Boards
Semi Rigid Boards could be used inCavity walls, dry constructions,ventilated facades, and roofs.
D e n s i t y
T h i c k n e s s
Board dimensions:
Fire Performance:
Operation Temperature (0C ) :
Thermal Conductivity:
Ú = 75 kg / m3
30 – 40 – 50 – 60 – 80 mm
1200 x 600 mm
A 1
750 0C
Ï = 0.0318 W / m*K
B-001Geolan
Rigid Boards
Geolan B-001 R ig id Boards
Rigid Boards could find use in floors, ventilated facades,and roofs.
D e n s i t y
T h i c k n e s s
Board dimensions:
Fire Performance:
Operation Temperature (0C ) :
Thermal Conductivity:
Ú = 100 kg / m3
30 – 40 – 50 – 60 – 80 mm
1200 x 600 mm
A 1
750 0C
Ï = 0.0315 W / m*K
5
B-051Geolan
Hard Boards
Geolan B-051 Hard Boards
Hard Boards could findapplication in floors and roofs.
D e n s i t y
T h i c k n e s s
Board dimensions:
Fire Performance:
Operation Temperature (0C ) :
Thermal Conductivity:
Ú = 150 kg / m3
20 – 30 – 40 – 50 – 60 – 80 mm
1200 x 600 mm
A 1
750 0C
Ï = 0.033 W / m*K
B-571Geolan
Ex tra Ha rd Boa rds
Geolan B-57 1 E xtra Hard Boards
Extra Hard Boards could findapplication in floors and roofs.
D e n s i t y
T h i c k n e s s
Board dimensions:
Fire Performance:
Operation Temperature (0C ) :
Thermal Conductivity:
Ú = 175 kg / m3
20 – 30 – 40 – 50 – 60 – 80 mm
1200 x 600 mm
A 1
750 0C
Ï = 0.036 W / m*K
6
IN BULKGeolan
GEOLAN BULK could be used inBoiler, Container.
Packages of 40, 80, 400 kg
with facingsGeolan
Geolan products can produced withdifferent types of facing like:
Alufoil, craft paper,glass tissue (white/ black).
7
R-040Geolan
Insulat ion Rol l
Geolan R-040 Insula t ion Ro l l
Insulation Roll’s applicationsare Cavity wall, dryconstruction and roofs.
D e n s i t y
T h i c k n e s s
Roll dimensions:
Fire Performance:
Operation Temperature (0C ) :
Thermal Conductivity:
Ú = 40 kg / m3
50 – 60 – 80 – 100 – 120 mm
1000 x 600 mm
A 1
750 0C
Ï = 0.033 W / m*K
R-56-KOGeolan
Mat ress on Wi renet
Geolan R-5 6-KO Ma tress on Wi renet
Matress on wirenet applications’are in industrial insulation,pipes, ventilations.
D e n s i t y
T h i c k n e s s
Roll dimensions:
Fire Performance:
Operation Temperature (0C ) :
Thermal Conductivity:
Ú = 65 kg / m3
30 – 40 – 50 – 60 – 80 – 100 – 120 mm
1m x 6m /5m /5m /3m /3m /2.5m /2.5m
A 1
750 0C
Ï = 0.032 W / m*K
8
R-080-KOGeolan
Matr ess on Wi renet
Geolan R-08 0-KO Matress on W ire net
Matress on wirenetapplications’ are in industrialinsulation, pipes, ventilations.
¶ ̆ Î Ó fi Ù Ë Ù · :
¶ ¿ ̄ Ë :
¢È·ÛÙ¿ÛÂȘ Ͽη˜:
∞ Î · ̆ Û Ù fi Ù Ë Ù · :
ª¤ÁÈÛÙË ıÂÚÌÔÎÚ·Û›· (0C):
™˘ÓÙÂÏÂÛÙ‹˜ ıÂÚÌÈ΋ ̃·ÁˆÁÈÌfiÙËÙ·˜:
Ú = 80 kg / m3
30 – 40 – 50 – 60 – 80 – 100 – 120 mm
1m x 6m /5m /5m /3m /3m /2.5m /2.5m
A 1
750 0C
Ï = 0.0318 W / m*K
R-001-KOGeolan
Matress on Wi renet
Geolan R-001 -KO Mat ress on W iren et
Matresses on wirenet applications’are in industrial insulation, tanks,Boiler, furnace.
¶ ̆ Î Ó fi Ù Ë Ù · :
¶ ¿ ̄ Ë :
¢È·ÛÙ¿ÛÂÈ ̃Ͽη˜:
∞ Î · ̆ Û Ù fi Ù Ë Ù · :
ª¤ÁÈÛÙË ıÂÚÌÔÎÚ·Û›· (0C):
™˘ÓÙÂÏÂÛÙ‹˜ ıÂÚÌÈ΋˜ ·ÁˆÁÈÌfiÙËÙ·˜:
Ú = 100 kg / m3
30 – 40 – 50 – 60 – 80 – 100 – 120 mm
1m x 6m /5m /5m /3m /3m /2.5m /2.5m
A 1
750 0C
Ï = 0.0315 W / m*K
9
WL/60FibranEco
Cav i ty Wal l
FibranEco WL/60 Wall Boards
Insulation of Cavity Wall.
D e n s i t y :
T h i c k n e s s :
Board dimensions:
Compression strength at 10% deform.
Water absorption by immersion:
Water vapor permeability:
Thermal conductivity:
Ú = 30 kg / m3
25 – 30 – 40 – 50 – 60 – 80 – 100 mm
2500 x 600 mm
3 0 0 k P a
0.3% by volume
1,2 ng/ (Pa s m)
Ï = 0.03 W / m*K
RF/60FibranEco
R o o f
FibranEco RF/6 0 Roof Boa rds
Insulation of roofs, floors, walls, basements.
Available edge finish I / L / D
D e n s i t y :
T h i c k n e s s :
Board dimensions:
Compression strength at 10% deform.
Water absorption by immersion:
Water vapor permeability:
Thermal conductivity:
Ú = 28 kg / m3
25 – 30 – 40 – 50 – 60 – 80 – 100 mm
1250 x 600 mm
3 0 0 k P a
0.5% by volume
1,8 ng/ (Pa s m)
Ï = 0.032 W / m*K
Available edge finish I / L / D
1 0
GF/60FibranEco
G o f r e
FibranE co GF/6 0 Gofre Boards
Insulation for general use .
D e n s i t y :
T h i c k n e s s :
Board dimensions:
Compression strength at 10% deform.
Water absorption by immersion:
Water vapor permeability:
Thermal conductivity:
Ú = 32 kg / m3
20 – 30 – 40 – 50 mm
2500 x 600 mm
3 0 0 k P a
0.3% by volume
1 ng/ (Pa s m)
Ï = 0.03 W / m*K
BT/60FibranEco
R o u g h
FibranEco BT/60 Rough B oards
Insulations of external wall Facades
D e n s i t y :
T h i c k n e s s :
Board dimensions:
Compression strength at 10% deform.
Water absorption by immersion:
Water vapor permeability:
Thermal conductivity:
Ú = 28 kg / m3
25 – 30 – 40 – 50 – 60 – 80 – 100 mm
2500 x 600 mm
0.5% by volume
1,8 ng/ (Pa s m)
Ï = 0.032 W / m*K
Available edge finish I / L / D
Available edge finish I / L / D
1 1
FL/60FibranEco
F l o o r
Fibran Eco FL/60 Floor Boa rds
Insulation of floors with big loads.
D e n s i t y :
T h i c k n e s s :
Board dimensions:
Compression strength at 10% deform.
Water absorption by immersion:
Water vapor permeability:
Thermal conductivity:
Ú = 38 kg / m3
30 – 50 mm
1250 x 600 mm
400 - 500 kPa
0.3% by volume
1 ng/ (Pa s m)
Ï = 0.03 W / m*K
GI/120/IFibranEco
G i g a
FibranEco GI/120 / I Giga Boa rds
Insulation of big surfaces false ceiling of industrialbuildings, ect.
D e n s i t y :
T h i c k n e s s :
Board dimensions:
Compression strength at 10% deform.
Water absorption by immersion:
Water vapor permeability:
Thermal conductivity:
Ú = 32 kg / m3
30 – 40 – 50 – 60 mm
2500 x 600 mm
300 - 400 kPa
0.3% by volume
1 ng/ (Pa s m)
Ï = 0.03 W / m*K
Available edge finish I / L
Available edge finish I / L / D
1 2
GP/120/IFibranEco
Wal l Facing
Fibra nEco GP /12 0/ I Wal l Fac ing Boards
Insulation of walls internally and plaster elements.
D e n s i t y :
T h i c k n e s s :
Board dimensions:
Compression strength at 10% deform.
Water absorption by immersion:
Water vapor permeability:
Thermal conductivity:
Ú = 28 kg / m3
39.5 – 49.5 – 59.5 mm
2500 x 600 mm
0.5% by volume
1,8 ng/ (Pa s m)
Ï = 0.032 W / m*K
FR/60FibranEco
Coo l Rooms
FibranE co FR/6 0 Cool Room Boa rd
Insulation of cool rooms.
D e n s i t y :
T h i c k n e s s :
Board dimensions:
Compression strength at 10% deform.
Water absorption by immersion:
Water vapor permeability:
Thermal conductivity:
Ú = 35 kg / m3
50 – 75 mm
2500 x 600 mm
3 5 0 k P a
0.3% by volume
1 ng/ (Pa s m)
Ï = 0.03 W / m*K
Available edge finish I / L / D
Available edge finish I
1 3
TL/30FibranEco
Flat Roo ft i le
Fibran Eco TL/30 F la t Roof t i le Boards
Insulation of roofs.
D e n s i t y :
T h i c k n e s s :
Board dimensions:
Compression strength at 10% deform.
Water absorption by immersion:
Water vapor permeability:
Thermal conductivity:
Ú = 28 kg / m3
70 mm
600 x 300 mm
0.5% by volume
1,8 ng/ (Pa s m)
Ï = 0.032 W / m*K
PI/120/IFibranEco
P i l o t i s
F ibra nEco P I/1 20/ I P i lo t i s Board s
Insulation of cavity walls from the surface below.
D e n s i t y :
T h i c k n e s s :
Board dimensions:
Compression strength at 10% deform.
Water absorption by immersion:
Water vapor permeability:
Thermal conductivity:
Ú = 28 kg / m3
42.5 – 52.5 – 62.5 mm
2500 x 600 mm
0.5% by volume
1,8 ng/ (Pa s m)
Ï = 0.032 W / m*K
Available edge finish I
Available edge finish D
1 4
XPEFibranXpe
R o l l
Fibra nXpe Rol l
The expanded extruded polyethylene FIBRAN XPE could be used in sound insulation of flooring (floatable screed, floating floor), and in industrial insulations like pipes.
It is found in three types: - Without facing- With facing HDPE 15m for vapor barrier - With facing PP Alum 20m for reflection of heat
For any further information please consulted the technical brochures of the products with the technical information on thesafety and the right application and their storage.
G r a v i t y
Compression strength at 10% deformation:
Water absorption by immersion:
Thermal conductivity:
25 - 30 kg / m3
150 gr / m2
0,5% Î.Ô. Û 24 ÒÚ˜
Ï = 0.035 W / m*K
Roll dimensions 1500cm x 200m x 2 mm
1500cm x 1400m x 3 mm
1500cm x 1000m x 5 mm
1500cm x 45m x 8 mm
1 5
INDUSTRIAL SITE
TERPNI, SERRES
Web site: www.fibran.gr / e-mail: [email protected]
T H E S S A L O N I K I6th Km Thessaloniki - OreokastroP.O.B. 40306, 560 10 ThessalonikiT +3 2310/ 682.425 , 681.823F +3 2310/ 683.131
A T H E N SIZOTEC S.A., 37, Ag. Athanasiou str.145 65, Anixi Atikis, AthensT +3 210/ 81.42.415 , 81.42.414F +3 210/ 81.41.850
C Y P R U S312, Tseriou str., P.O.B 22395CY-1521 Nicosia, CyprusT 00357 22 814300F 00357 22 324255