Fiber Pacth Cords
4
Visit www.fiberstore.com for more information Tel: +1 (206) 453 0158 Email:[email protected] Datasheet Fiber-Patch-Cords Custom Patch Cord Options： Fiber connectors options: : ST, SC, LC, FC, LC/APC, SC/APC, FC/APC, FDDI, SMA, ESCON, MTP, MPO, MTP/APC, MPO/APC, MTRJ, MU, E2000. Polish Types: PC < - 40dB, UPC (Ultra Physical Contact) <–50dB, APC(Angled Physical Contact) <–60dB To reduce the back reflection of a connector,UPC polish. Industry standard is a minimum of–40dB for PC back reflec-tion measurement and–50dB for UPC back reflection measurement. If even less back reflection is required, an APC might be necessary. An APC connector has an 8ºangle cut into the ferrule. These connectors are identifiable by their green color. An APC polished connector has an Indus-try Standard Minimum of–60dB measurement. APC fiber ends have low back reflection even when disconnected. LC SC ST MU MTRJ FC E2000 MPO Any Type. Any Length. Any Color! Our fiber optic patch cords are made and custom to order worldwide. All Custom & OEM quote are returned to the customer within one business day. PC UPC APC
-
Upload
pasham-shiva -
Category
Documents
-
view
223 -
download
1
description
Pacth cords description
Transcript of Fiber Pacth Cords
-
Visit www.fiberstore.com for more information Tel: +1 (206) 453 0158 Email:[email protected]
Datasheet
Fiber-Patch-Cords
Custom Patch Cord OptionsFiber connectors options: : ST, SC, LC, FC, LC/APC, SC/APC, FC/APC, FDDI, SMA, ESCON, MTP, MPO, MTP/APC,MPO/APC, MTRJ, MU, E2000.
Polish Types: PC < - 40dB, UPC (Ultra Physical Contact)
-
Visit www.fiberstore.com for more information Tel: +1 (206) 453 0158 Email:[email protected]
DatasheetFiber Type: Single Mode 9/125m OS1, OS2, Multimode 62.5/125m OM1, Multimode 50/125m OM2, Multimode 50/125mOM3 10Gb gig, Multimode 50/125m 10Gb OM4
Fiber Count: Simplex(A single fiber), Duplex(2 fibers in a single cable, Zip Cord), Multi-Fiber cables, custom configurations,common are 4 fiber, 6fiber, 8fiber, 12 fiber, 24 fiber, 48 fiber, 72 fiber, 144 fiber, 256 fiber. Higher fiber counts are normallytermi-nated as a MTP/MPO Trunk cables, using MTP/MPO connectors.
Fiber Diameter optional are: 900um, 3.0mm, 2.0mm, 1.8mm, 1.6mm
Cable construction:
TECH SPEC
ATTENUATION
2.5-m: 850 nm:2.9 dB/km;1300 nm:0.6 dB/km; 50-m PVC: 850 nm:2.4 dB/km; 1300 nm:0.7 dB/km; 10-GbE 50-m PVC: 850 nm:2.3 dB/km; 1300 nm:0.6 dB/km; 9-m: 1310 nm: 0.330.35 dB/km; 1383 nm: 0.310.35 dB/km; 1550 nm: 0.190.20 dB/km; 1625 nm: 0.200.23 dB/km
BANDWIDTH
62.5-m: Intermediate performance EMB: 850 nm: 220 MHz/km; Legacy performance EMB: 850 nm: 200MHz/km; 1300 nm: 500 MHz/km; 50-m: Intermediate performance EMB: 850 nm: 510 MHz/km; Legacy performance EMB: 850 nm: 500MHz/km; 1300 nm: 500 MHz/km; 10-GbE 50-m: Intermediate performance EMB:850 nm:2000 MHz/km; Legacy performance EMB:850nm:1500MHz/km; 1300nm: 500 MHz/km Cladding Diameter 125 m Core Diameter 62.5 m, 50 m,or 9 m
OPERATINGTEMPERATURE 14 to 158 F (-10 to +70 C);
OPTIMIZEDDATA RATE
62.5-m: 850 nm: 1 Gbps over 300 m; 1300 nm: 1 Gbps over 550 m; 50-m: 1 Gbps over 600 m; 10-GbE 50-m: 1 Gbps over;1000 m at 850 nm;10-Gbps at 300 m at 850 nm
STANDARDS
62.5-m: ISO/IEC 11801: Type OM1 fiber; IEC 60793-2-10: Type A1b fiber; TIA/EIA: 492AAAA-A; 50-m PVC: ISO/IEC 11801: Type OM2 fiber; IEC 60793-2-10: Type A1a.1 fiber;TIA/EIA: 492AAAB; 10-GbE 50-m PVC: ISO/IEC 11801: Type OM3 fiber; Type A1a.2; TIA/EIA: 492AAAC-B Single-mode: ITU-T G.652 (Categories A, B, C, D); IEC 60793-2-50 Type B1.3;TIA/EIA 492-CAAB; TelecordiaGR-20
ST-ST Cable construction MTRJ-MTRJ Cable construction
LC-LC Cable construction SC-SC Cable construction
-
Visit www.fiberstore.com for more information Tel: +1 (206) 453 0158 Email:[email protected]
Datasheet
Standard cable jacket colors are:Singelmode Yellow, Mulitmode Orange, Multimode 50 10Gb Aqua/Light Blue.
Other Colors We Can Custom:
Jacket material options: PVC jacket, OFNR Riser jacket, OFNP Plenum Jacket, LSZH, Armored JacketOFNR (Optical Fiber Nonconductive Riser)This is cable containing only glass fiber with no copper conductive elements. It is generally intended for vertical runs between floorsas part of a fiber backbone. This type of cable complies with the Underwriters Laboratories (UL) fire safety test Riser/1666.OFNP (Optical Fiber Nonconductive Plenum)This is a cable containing only glass fiber with no copper conductive elements. It is generally intended for horizontal runs especiallywithin an air handing conduit. This type of cable complies with the Underwriters Laboratories (UL) fire safety test Riser/1666.
Cable length: Any cable length option, Normally measured in Meters. Optional lengths, CM, mm, Inches, Foot, KM, Mile
Labeling: FiberStore Labels as defaultGeneric LabelsSpecific Labels as RequestNo Labels
With the on-site, precision manufacturing equipment and our skilled workers, our fiber optic patch cords are reliable and 100%tested according to industrial and international standards to guarantee top performance. All our fiber patch cords are with flexiblecustomization, good prices and very prompt delivery.
Each assembly is serialized for easy identification ans sealed in individual Ziploc bags.
Singelmode sample Multimode sample 10Gb sample
Blue Green Brown Gray Black White Purple Red Pink
-
Visit www.fiberstore.com for more information Tel: +1 (206) 453 0158 Email:[email protected]
Datasheet
Buying Guide
MAKE TO ORDER Customizing your Fiber Patch Cable(options)
FIBER TYPE JACKET TYPECABLE
DIAMETERFIBER COUNT CONNECTOR POLISH TYPE
CABLELENGTH(METER)
OS1 9/125 OS2 9/125 OM1 62.5/125 OM2 50/125OM 310G 50/125 OM4 50/125
PVC (OFNR riser-rated) LSZH Plenum
900um 1.6mm 2.0mm 3.0mm
SIMPLEX DUPLEX 4 FIBERS 6 FIBERS 8 FIBERS 12 FIBERS 24 FIBERS 48 FIBERS >48 FIBERS
FIRST END LC SC ST FC MU MTRJ MPO(Female) MPO(Male) E2000 DIN SECOND END LC SC ST FC MU MTRJ PO(Female) MPO(Male) E2000 DIN
PC Polish UPC Polish APC Polish
Any length
