FG/D20-25P - Allstar Lift Trucks 4,000 5,000 Lb. LPG Diesel Pneumatic Tire Specifications & Features...

4
FG/D20-25P 4,000 – 5,000 Lb. LPG – Diesel Pneumatic Tire Specifications & Features FG/D20-25P

Transcript of FG/D20-25P - Allstar Lift Trucks 4,000 5,000 Lb. LPG Diesel Pneumatic Tire Specifications & Features...

FG/D20-25P4,000 – 5,000 Lb.LPG – DieselPneumatic TireSpecifications & Features

FG/D20-25P

Model G-Gas LP / D-Diesel FG/D20P FG/D25P

Capacity LbLb 4,000 (1,814kg) 5,000 (2,268kg)

Load Center InchInch 24 (609mm) 24 (609mm)

Power Engine EngEng LPG/Diesel LPG/Diesel

Tires Air Pneumatic FrontFrontRearRear

7.00 x 12 (12pr)6.00 x 9 (10pr)

7.00 x 12 (12pr)6.00 x 9 (10pr)

Fork Size Length InchInch 42 (1066mm) 42 (1066mm)

Mast Tilt – fwd/back DegDeg 6 / 12 6 / 12

Total Width – add 17” Dual Drive InchInch 45.6 (1158mm) 45.6 (1158mm)

Mast Height – See chart below InchInch 84-188 84-188

Overhead Guard Height InchInch 83.1 (2110mm) 83.1 (2110mm)

Minimum Outside Turning Radius InchInch 85.4 (2169mm) 88.6 (2250mm)

Max Seat Height InchInch 44.1 (1120mm) 44.1 (1120mm)

Travel Speed mphmph 12.4 mph 12.4 mph

Total Length – less forks InchInch 98 (2489mm) 99.5 (2527mm)

Service Weight LbLb -- kilogramkilogram 7830 (3351kg) 8320 (3773kg)

LPG Eng GM 3.0LDiesel – Yanmar 4TNE98

Hp/rpmHp/rpm 75/300068/2500

75/300068/2500

LPG Eng GM 3.0LDiesel – Yanmar 4TNE98

Hp/rpmHp/rpm 75/300068/2500

75/300068/2500

Wheelbase InchInch 61 (1549mm) 61 (1549mm)

Brakes typetype Hand/Foot Hand/Foot

Engine / ModelLPG / Diesel

GM 3.0LYanmar 4TNE98

GM 3.0LYanmar 4TNE98

Transmission - Power shift AutomaticAutomatic Automatic Automatic

TypeInch / (mm)

LoweredHeight “

RaisedHeight “

FreeLift “

TiltForward deg

TiltBack deg

Standard Mast 84 (2133) 130 (3302) 6 (152) 6 12

Standard Mast 88 (2235) 138 (3505) 6 (152) 6 12

Standard Mast 92 (2336) 146 (3708) 6 (152) 6 12

FFL Mast 84 (2133) 130 (3302) 65 (1651) 6 12

Triple -popular 84 (2133) 188 (4775) 60 (1524) 6 6

Triple 86 (2184) 197 (5003) 62 (1574) 6 6

Triple 96 (2438) 217 (5511) 72 (1828) 6 6

Features & Benefits•GM 3.0L, 4 cycle, 4 cylinders,75hp, 181 cu in displacement.Nodular iron crankshaft forincreased strength World-classengine sealing system forsuperior leak protection.Sintered powdered-metalexhaust valve seats forenhanced durability and noisereduction. Cast Iron: Block,Cylinder head and intakemanifold.

•Power shift (Automatic)transmission with separateinching and brake pedals, offerspositive operation in tightworking areas, especiallybeneficial working on ramps andinclines.

•High visibility design mast withside thrust rollers in the carriagefor smoother operation andlonger life of the mastcomponents.

•Fully Hydrostatic PowerSteering for smoother operationand many fewer parts for lowermaintenance costs. This utilizesthe largest cylinder and thickeststeel for protection of any forkliftin its class!

•Large hydraulically actuatedDrum & Shoe type brakes forpositive braking performanceand ease of maintenance.Mechanical lever type parkingbrake for reliability.

•Control Handles are mountedon the dash for operatorconvenience and also allows theoperator to enter/exit theoperator compartment fromeither side of the machinecomfortably.

•Tilt Steering Wheel• Adjustable Seat• Seat Belt• Dual Head Lights• Front Turn Signals• Rear Turn Signals• Brake Lights• Back-up Lights• Back-up Alarm• Neutral Safety Switch• Welded Overhead Guard• Integral Gas Tank• Integral Hydraulic Tank• High air intake• Cyclone air cleaner• Insulated engine cover• Hand hold for entry• Radiator overflow bottle• Third valve & lever• Horn• Hour Meter• Charge warning light• Temperature warning light• Oil pressure gauge• Key switch• Safety load backrest• ITA Class II forks & carriage• Easy access floor boards• Rubber safety mat• Meet or exceed all ANSI B56.1

safety standards for poweredindustrial trucks and UnderwritersLaboratories requirements as tofire hazard.EPA Compliant

•GM 3.0L, 4 cycle, 4 cylinders,75hp, 181 cu in displacement.Nodular iron crankshaft forincreased strength World-classengine sealing system forsuperior leak protection.Sintered powdered-metalexhaust valve seats forenhanced durability and noisereduction. Cast Iron: Block,Cylinder head and intakemanifold.

•Power shift (Automatic)transmission with separateinching and brake pedals, offerspositive operation in tightworking areas, especiallybeneficial working on ramps andinclines.

•High visibility design mast withside thrust rollers in the carriagefor smoother operation andlonger life of the mastcomponents.

•Fully Hydrostatic PowerSteering for smoother operationand many fewer parts for lowermaintenance costs. This utilizesthe largest cylinder and thickeststeel for protection of any forkliftin its class!

•Large hydraulically actuatedDrum & Shoe type brakes forpositive braking performanceand ease of maintenance.Mechanical lever type parkingbrake for reliability.

•Control Handles are mountedon the dash for operatorconvenience and also allows theoperator to enter/exit theoperator compartment fromeither side of the machinecomfortably.

•Tilt Steering Wheel• Adjustable Seat• Seat Belt• Dual Head Lights• Front Turn Signals• Rear Turn Signals• Brake Lights• Back-up Lights• Back-up Alarm• Neutral Safety Switch• Welded Overhead Guard• Integral Gas Tank• Integral Hydraulic Tank• High air intake• Cyclone air cleaner• Insulated engine cover• Hand hold for entry• Radiator overflow bottle• Third valve & lever• Horn• Hour Meter• Charge warning light• Temperature warning light• Oil pressure gauge• Key switch• Safety load backrest• ITA Class II forks & carriage• Easy access floor boards• Rubber safety mat• Meet or exceed all ANSI B56.1

safety standards for poweredindustrial trucks and UnderwritersLaboratories requirements as tofire hazard.EPA Compliant

FG/D20-25P

Shared values

Tilt SteeringWheel

HeadlightsBack UpLights

Standard Equipment

Two Stage MastPneumatic TiresGM 3.0L EngineTier IIIAutoTransmissionHeadlightsBack Up LightsTurn SignalsHydro Steer AxleMirrorsLoad BackrestSeat BeltTilt Steer Wheel3rd ValveOperator ManualStandard Forks

Diesel EngineYanmar

Various MastsStandard

Full Free LiftTriplex

Various TireOptions

SolidFoam FilledLPG Tanks

Side Shifters4 Way Hydraulics

Much More!

Optional Equipment

Shared values

ThirdValve

TurnSignals

Two Stage MastPneumatic TiresGM 3.0L EngineTier IIIAutoTransmissionHeadlightsBack Up LightsTurn SignalsHydro Steer AxleMirrorsLoad BackrestSeat BeltTilt Steer Wheel3rd ValveOperator ManualStandard Forks

Diesel EngineYanmar

Various MastsStandard

Full Free LiftTriplex

Various TireOptions

SolidFoam FilledLPG Tanks

Side Shifters4 Way Hydraulics

Much More!

FG/D20-25P