FERRO PIGMENTS FOR PLASTICS...®FERRO. Where innovation delivers performance™ FERRO PIGMENTS FOR...
19
®FERRO. Where innovation delivers performance™ ®FERRO. Where innovation delivers performance™ FERRO PIGMENTS FOR PLASTICS Ferro Enamel do Brasil Industria e Comercio Ltda. 6500 Florinda Cibin Street - São Jerônimo 13470-437 - Americana - São Paulo Brazil Phone: +55 19-2108-9900 Ferro Colombia S.A.S Carrera 46 nº 52-82 Edificio cámara de comercio Piso 9 Av. Oriental C.P. 050012. Medellin Colombia Phone: +574 444 46 46 Fax: +574 513 33 74 Ferro Mexicana, S.A. de C.V. Oriente 171 Num. 450 Col. Prol. Aragon-Inguaran Del. Gustavo A. Madero C.P. 07490 Mexico, D.F. Phone: +52 55-50-90-72-00 FERRO GLOBAL HEADQUARTERS Ferro Corporaon 6060 Parkland Boulevard Suite 250 Mayfield Heights, Ohio 44124 USA Phone: +1 216-875-5600 Fax: +1 216-875-5627 AMERICAS Ferro Corporaon 6369 Peachtree St. NW Peachtree Corners, GA 30071 USA Phone: +1 470-273-3360 Fax: +1 470-273-3350 251 West Wylie Ave. Washington, PA 15301 USA Phone: +1 800-257-9799 Fax: +1 724-207-2301 Ferro Argenna S.A Gibraltar 1365 B1872CWC, Sarandi PCIA de Buenos Aires, Argenna Phone: +54 11-4205-2662 www.ferro.com Copyright © Ferro Corporaon 2018 March 2018
Transcript of FERRO PIGMENTS FOR PLASTICS...®FERRO. Where innovation delivers performance™ FERRO PIGMENTS FOR...
regFERRO Where innovation delivers performancetrade
regFERRO Where innovation delivers performancetrade
FERRO PIGMENTS FOR PLASTICS
Ferro Enamel do Brasil Industria e Comercio Ltda 6500 Florinda Cibin Street - Satildeo Jerocircnimo 13470-437 - Americana - Satildeo Paulo Brazil Phone +55 19-2108-9900
Ferro Colombia SAS Carrera 46 nordm 52-82 Edificio caacutemara de comercio Piso 9 Av Oriental CP 050012 Medellin Colombia Phone +574 444 46 46 Fax +574 513 33 74
Ferro Mexicana SA de CV Oriente 171 Num 450 Col Prol Aragon-Inguaran Del Gustavo A Madero CP 07490 Mexico DF Phone +52 55-50-90-72-00
FERRO GLOBAL HEADQUARTERS
Ferro Corporation 6060 Parkland Boulevard Suite 250 Mayfield Heights Ohio 44124 USA Phone +1 216-875-5600 Fax +1 216-875-5627
AMERICAS
Ferro Corporation 6369 Peachtree St NW Peachtree Corners GA 30071 USA Phone +1 470-273-3360 Fax +1 470-273-3350
251 West Wylie Ave Washington PA 15301 USA Phone +1 800-257-9799 Fax +1 724-207-2301
Ferro Argentina SA Gibraltar 1365 B1872CWC Sarandi PCIA de Buenos Aires Argentina Phone +54 11-4205-2662
wwwferrocom Copyright copy Ferro Corporation 2018
Mar
ch 2
018
regFERRO Where innovation delivers performancetrade
FERRO PIGMENTS FOR PLASTICS
About Ferro Corporation
Ferro Corporation (NYSE FOE) is a leading global supplier of technology-based performance materials including glass-based coatings pigments and colors and polishing materials Ferro products are sold into the building and construction automotive appliances electronics household furnishings and industrial products markets The Company is headquartered in Mayfield Heights Ohio USA
Our Values and behaviors
CUSTOMER FOCUS Our customers are why we exist We build relationships with internal and external customers that are built on trust a desire to understand their needs and challenges and a genuine interest in making them more successful
ACCOUNTABILITY FOR PERFORMANCE As individuals and teams we work to achieve the highest performance standards We prioritize safety and environmental stewardship providing high-value solutions for our customers and creating value for Ferrorsquos shareholders
INNOVATIVE THINKING We encourage our associates to seek out new ideas for technologies and business processes and to always look for ways to improve and to better serve our customers
TEAMWORK AND COLLABORATION We are committed to a work environment that promotes trust mutual respect teamwork and collaboration and that focuses on consistently delivering value to our customers and shareholders
PB29 middot Nubix G-58
PB29 Nubiperf H-56FCP-H
PB29 Nubiperf FG-75FCP-G
PB29 Nubiperf F36FCP-R
PB29 middot Nubiperf SRO
PB29 middot Nubiperf AR
PB28middot10466
PB28middot10336
PB36 middot V-9242
PB36 middot V-9248
PB36 middot F-5686
PG50 middot V-9229
Violet bull 28-5333
PV15 middot Nubix V-5
PV15 middot Nubix V-8
PV15 middot Nubix V-40
PV15 middot Nubix V-60
PG50 middot 21-5801
PG50 middot 21-5901
PG50 middot 21-4345
PG50 middot V-11633
PG50 middot SPP-6008
PG26 middot V-12600
PG17 middot Nubicrom 02
PG17 middot SMM-7
PG17 middot SMM-4
PY53 middot 10401
PY184 middot Nubivan Y-901
PY34 PY119 middot Nubifer Y-805K PR101 middot Nubifer R-5530 PBk26 middot F-6331-2 Nubiterm AK-81
PY34 PY119 middot Nubifer Y-905K PBk33 middot 24-3303 Nubiterm AK-74
PR101 bull Nubifer R-5540
Vgt c
Vgt
iii C
[o0 c
PBr24 middot 10406 PBk33 g E
Nubifer NB-803K 0-~ C
middots c I iii 3 0 c
Vgt
gt E Vgt
PBr24 middot 10408 PBr29 middot 10466 sect ~ C middot Q c 0
0 0 u c
PBr24 middot V-12112 PR101 middot Nubifer R-5501 PG17 bull V-774
PY164 middot 10550 PR101 middot Nubifer R-5560
PBr29 middot V-10121-2 PR101 middot Nubifer R-5580C
PR104 middot NRC-36
PR101 middot Nubifer R-5510 PR104 Nubiterm NK-38
PY42 middot Nubifer Y-7050 PG17 middot V-775
PR101 middot Nubifer R-5520 PBk28 middot V-7710 PBk12 bull 10358 PBkll middot Nubifer NB-5970
bull
bull
bull
bull
MAIN CHARACTERISTICS
Sodium Aluminum Sulfosilicate Na [(AlSi) ]O (S )8-x 12 24 y 2
Pigment Blue 29 (CI 77007)
Unique reddish blue shade
Excellent ability to make whites ldquowhiterrdquo greys bluer and blacks ldquojetterdeeperrdquo
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Semitransparent to visible light transparent to NIR (ldquocoolrdquo pigment but its cool performance will be highly dependent on substrate and formulation)
BLUE PB29 ULTRAMARINE BLUE
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers PVC Silicones and Rubber
Heat fastness 350oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (4-5 on grey scale) Acid fastness Low except acid resistant series Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS
Nubix SERIES The high dispersibility narrow colorimetric tolerance low moisture and low free Sulfur content Ultramarine Blues
Nubiperf SERIES The very high dispersibility narrow colorimetric tolerance low moisture and low free Sulfur content Ultramarine Blues
Nubiperf SRD The Super Reddish Ultramarine Blue to 1) reach unique reddish blue shades 2) avoid the use of tiny problematic amounts of red violet organic pigments to shade blues 3) tint whites and reduce polymerrsquos yellowness with a unique neutral shade
Nubiflow
The very high dispersibility narrow colorimetric tolerance low moisture and low free Sulfur content Ultramarine Blue specially recommended for fibers and very thin films
Nubiperf FCP SERIES (Food and Cosmetics Packaging)
The very low free Sulfur content very high dispersibility narrow colorimetric tolerance and low moisture content Ultramarine Blues specially recommended for sensitive to odor and taste applications
Nubiperf AR (new generation Acid Resistant grade) Encapsulated grade that shows high acid resistance in use and good dispersibility specially recommended for PVC POM or any other polymer in contact with acids or that can release acids during service life
LD SERIES (Low Dust)
Combinations of Ultramarine Blues with a Polyethylene wax to enhance processing and free-flow performance mostly in Polyolefins
bull bull
bull bull
bull bull
bull bull
bull bull
BLUEPB28 COBALT ALUMINATE BLUE SPINEL
PB36 COBALT
CHROMITE BLUE-GREEN
SPINEL
MAIN CHARACTERISTICS
CoAl2O4
Pigment Blue 28 (CI 77346)
Spinel structure
Reddish blue shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
UV transparent opaque to visible light with moderate NIR reflectance (ldquocoolrdquo pigment)
MAIN CHARACTERISTICS
Co(AlCr)2O4
Pigment Blue 36 (CI 77343)
Spinel structure
Greenish blue shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
UV transparent opaque to visible light with moderate NIR reflectance (ldquocoolrdquo pigment)
BLUE
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS V-3285 Standard grade 10446 High tinting strength reddish shade
10336 High tinting strength reddish shade V-9250 High tinting strength reddish shade
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS V-9242 Standard grade F-5686 Turquoise Blue greenish shade
V-9248 High tinting strength
bull bull
bull
bull
bull bull
PV15 ULTRAMARINE VIOLET
Heat fastness 300oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (4-5 on grey scale) Acid fastness Low Alkali fastness High Solvent fastness Excellent
MAIN CHARACTERISTICS Sodium Aluminum Sulfosilicate Na8-x[(AlSi)12]O24(Sy)2
Pigment Violet 15 (CI 77007)
Unique violet shades
Excellent dimensional stability no warping no shrinkage
Semitransparent to visible light transparent to NIR (ldquocoolrdquo pigment but its cool performance will be highly dependent on substrate and formulation)
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers PVC Silicones and Rubber
MAIN CHARACTERISTICS Sr5(PO4)3Cu03O
Apatite structure
Unique violet shade
Suitable for replacing PV23 in applications that require high weather fastness
Excellent ability to make whites ldquowhiterrdquo
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Semitransparent to visible light NIR absorbent
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness High
Alkali fastness High Solvent fastness Excellent
VIOLET STRONTIUM PHOSPHATE
VIOLET
RECOMMENDED PRODUCTS Nubix SERIES Nubix V-5 Bluish shade
The high dispersibility narrow colorimetric tolerance low moisture and low free Sulfur
Nubix V-8 High tinting strength unique blue shade
Nubix V-40 High tinting strength unique reddish shade
content Ultramarine Violets Nubix V-60 Reddishpink shade
RECOMMENDED PRODUCTS 28-5333 Standard grade
(pending TSCA inventory)
bull
bull
bull bull
middotmiddotmiddot
middot- - -middotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddot-middot middot-
middotmiddotmiddotmiddotmiddotmiddot- middotmiddotmiddotmiddotmiddotmiddotmiddot- middotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddot-middotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddot-middotmiddotmiddotmiddot middot-middotmiddotmiddotmiddot
bull bull
PG17 CHROME OXIDE GREEN
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
MAIN CHARACTERISTICS
CoCr2O4
Pigment Green 26 (CI 77344)
Spinel structure
Dark bluish green shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with moderate NIR reflectance (ldquocoolrdquo pigment)
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
MAIN CHARACTERISTICS
Cr2O3
Pigment Green 17 (CI 77288)
PrismaticRhombohedral structure
Olive green shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with high NIR reflectance (ldquocoolrdquo pigment)
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness 500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
PG26 COBALT
CHROMITE GREEN SPINEL
GREEN
RECOMMENDED PRODUCTS SMM SERIES Nubicrom SERIES The micronized Chrome Oxide Greens The highly micronizedhigh dispersibility
Chrome Oxide Greens SMM-4 Bluish shade
SMM-6 Yellowish shade Nubicrom 02 Yellowish shade
SMM-7 Yellowish shade
RECOMMENDED PRODUCTS V-12600 Camouflage Green bluish shade V-12604 Camouflage Green yellowish shade
bull
bull
bull
bull
bull
PG50 COBALT TITANATE GREEN SPINEL
MAIN CHARACTERISTICS
Co2TiO4
Pigment Green 50 (CI 77377)
Spinel structure
Bright green shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque with moderate NIR reflectance (ldquocoolrdquo pigment)
Ni free products available
GREEN
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS V-11633 Standard grade 21-5901 Ni free (CMR classification free)
yellowish shade 21-4030 High tinting strength bluish shade 21-4345 Ni free (CMR classification free) 21-5801 Ni free (CMR classification free)
color like 21-4045 bluish shade
V-9229 Turquoise Blue greenish shade
bull
bull bull
bull bull
bull bull
bull bull
bull bull
YYYYEEEELLLLLLLLOOOOWWWW PY53 NICKEL ANTIMONY MAIN CHARACTERISTICS TITANIUM
(TiNiSb) O2YELLOW RUTILE Pigment Yellow 53 (CI 77788)
Rutile structure
Light yellow shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with high NIR reflectance (ldquocoolrdquo pigment)
BISMUTH VANADATE
PY184 MAIN CHARACTERISTICS
BiVO4
Pigment Yellow 184 (CI 771740)
Bright primrose yellow shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with high NIR reflectance (ldquocoolrdquo pigment)
Possible replacement of Chrome Yellows in combination with Organics
Possible replacement of Chrome Yellows in combination with Organics
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
Suitable for low processing temperature Polyolefins PVC and Rubber
Heat fastness 220oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent () IMPORTANT NOTE
For high heat fastness Bismuth Vanadates please check our available products in our legacy Cappelle pigments brochure
RECOMMENDED PRODUCTS 10401 Standard grade V-9412 Strong greenish shade
V-9415 Standard greenish shade V-9416 Unique reddish shade
RECOMMENDED PRODUCTS Nubivan Y-901 Standard grade very greenish
bull
bull
bull
bull
bull
bull
bull
bull
~
bull
bull
MAIN CHARACTERISTICS
PbCrO4
Pigment Yellow 34 (CI 77603)
Ease of dispersion
Opaque to visible light
PY34 CHROME YELLOW
YELLOW RECOMMENDED PRODUCTS AD-74 Conventional middle yellow Nubiterm AK-74 High heat fastness PbSO4 middle yellow AD-81 Conventional lemon yellow
Nubiterm AK-81 High heat fastness AL-90 Conventional primrose yellow Monoclinic to Rhombic structure depending on shade lemon yellow
Bright yellow shade (middle lemon and primrose) NB Ferro has not requested the REACH authorization for the use of Chrome Yellows in the European Union
Excellent dimensional stability no warping no shrinkage
Suitable for Polyolefins PS ABS Engineering Polymers (depending on processing temperature) PVC and Rubber
CONVENTIONAL (LD) Heat fastness 180oC 5 min SERIES Light fastness MiddleLemon = Fair Primrose = Low
Weather fastness MiddleLemon = Medium Primrose = Low
Acid fastness Fair Alkali fastness Low
Solvent fastness Excellent
RESISTANT (RS) SERIES Heat fastness 220-260oC 5 min
Light fastness MiddleLemon = High Primrose = Fair Weather fastness MiddleLemon = High Primrose = Fair Acid fastness High
Alkali fastness Low
Solvent fastness Excellent
Nubiterm K SERIES Heat fastness 300oC 5 min
Light fastness High
Weather fastness High Acid fastness High
Alkali fastness Low
Solvent fastness Excellent
bull
bull
bull bull
bull bull
bull bull
bull bull
bull
bull bull
BUFF PBr24 CHROME MAIN CHARACTERISTICS ANTIMONY
(TiCrSb) O2TITANIUM BUFF RUTILE Pigment Brown 24 (CI 77310)
Rutile structure
Clean buff shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with high NIR reflectance (ldquocoolrdquo pigment)
Possible replacement of Chrome Yellows in combination with Organics
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS 10406 Standard grade yellowish shade V-9118 Yellowish shade
10408 Standard grade reddish shade V-12112 High tinting strength reddish shade
10411 Strong greenish shade 10657 High tinting strength reddish blue
MAIN CHARACTERISTICS
FeOOH
Pigment Yellow 42 (CI 77492)
Goethite structure
Dull buff shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with low NIR reflectance
PY42 IRON OXIDE
YELLOW
Possible replacement of Chrome Yellows in combination with Organics
Good coloristics to combine with Organics and Inorganics to reach specific colors at very competitive cost eg natural greens bright reds chocolate browns light beiges
Conventional grades are suitable for low processing temperature Polyolefins PVC (just unplasticized compounds the more stabilized the PVC is the more suitable conventional Yellow Iron Oxides become) and Rubber Nubifer Y-7050 is suitable for medium processing temperature Polyolefins PS ABS PVC (plasticized and unplasticized compounds the more stabilized the PVC is the more suitable Nubifer Y-7050 becomes) and Rubber
Heat fastness 160oC 5 min except Nubifer Y-7050 (260oC 5 min)
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS Nubifer Y-5000 SERIES Nubifer Y-7000 SERIES The micronizedhigh dispersibilitynarrow The micronized higher heat fastness than colorimetric tolerance Yellow Iron Oxides conventional Yellow Iron Oxides
Nubifer Y-5010 Light shade Nubifer Y-7050 Encapsulated grade for medium processing Nubifer Y-5021 Reddish shade temperature resins (heat fastness = 260degC 5 min) and PVC (more suitable for unplasticized PVC compounds than conventional Yellow Iron Oxides)
bull
bull
bull
bull
bull
bull
bull
bull
PY119 ZINC FERRITE BROWN SPINEL
MAIN CHARACTERISTICS
ZnFe2O4
Pigment Yellow 119 (CI 77496)
Spinel structure
Reddish buff shade
Ease of dispersion
(ldquocoolrdquo pigment)
BUFFBUFFBUFF
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with moderate NIR reflectance
Possible replacement of Chrome Yellows in combination with Organics
Good coloristics to combine with Organics and Inorganics to reach specific colors at very competitive cost eg natural greens bright reds chocolate browns light beiges
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers PVC Silicones and Rubber
Heat fastness Nubifer Y-805K (300oC 5 min) Nubifer Y-905K (260oC 5 min)
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS Nubifer Y-805K 10520 Very high heat fastness spinel Very high heat fastness yellowish shade (300degC 5 min) dark reddish shade V-9117 Very high heat fastness spinel Nubifer Y-905K yellowish shade High heat fastness (260degC 5 min) light yellowish shade
bull
bull bull
bull bull
bull bull
bull bull
BBBUUUFFFFFF PY164 MANGANESE MAIN CHARACTERISTICS ANTIMONY
(TiMnSb) O2TITANIUM BUFF RUTILE Pigment Yellow 164 ( CI 77899)
Dark brown shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with high NIR reflectance (ldquocoolrdquo pigment)
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fast Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS 10550 Standard grade V-12100 Bluish shade
MAIN CHARACTERISTICS
Fe2TiO4
Pigment Black 12 (CI 77543)
Buff shade similar to PBr24 without containing Cr3+
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with moderate NIR reflectance (ldquocoolrdquo pigment)
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
PBk12 IRON
TITANIUM BROWN
SPINEL
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS 10358 Standard grade
bull
bull
bull bull
bull bull
- - -_middotmiddotmiddotmiddot - ---
~_ bullbullbullbull ------- - -~~
bull
bull
MAIN CHARACTERISTICS Fe2O3
Pigment Red 101 (CI 77491)
Hematite structure
Dull red shade
Ease of dispersion
MAIN CHARACTERISTICS PbCrO4PbSO4PbMoO4
Pigment Red 104 (CI 77605)
Tetragonal structure
Bright red shade (orange scarlet and red)
Ease of dispersion
PR104 MOLYBDATE
ORANGE
PR101 IRON OXIDE RED
RED
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with moderate NIR reflectance (ldquocoolrdquo pigment)
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC (plasticized and unplasticized compounds the more stabilized the PVC is the more suitable Red Iron Oxides become) Silicones and Rubber
Heat fastness 500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS Nubifer R-5500 SERIES
The micronizedhigh dispersibilitynarrow colorimetric tolerance Red Iron Oxides
Nubifer R-5501 Nubifer R-5510 Nubifer R-5520 Nubifer R-5530
The most yellowishlightest shade
Yellowish shade
Yellowish-medium shade
Yellowish-medium shade
Nubifer R-5540 Bluish-medium shade
Nubifer R-5560 Bluish-medium shade
Nubifer R-5580C The most bluishdarkest shade
Excellent dimensional stability no warping no shrinkage
Opaque to visible light
Suitable for Polyolefins PS ABS Engineering Polymers (depending on processing temperature) PVC and Rubber
Heat fastness 180o - 200o C 5 min SERIES Light fastness Fair
Weather fastness Fair Acid fastness Fair Alkali fastness Low Solvent fastness Excellent
CONVENTIONAL (L)
RESISTANT (RS) Heat fastness 240o - 260o C 5 min SERIES Light fastness High
Weather fastness High Acid fastness High Alkali fastness Low Solvent fastness Excellent
Nubiterm K SERIES Heat fastness 300o C 5 min Light fastness High Weather fastness High Acid fastness High Alkali fastness Low Solvent fastness Excellent
RECOMMENDED PRODUCTS NRC-36 Resistant scarlet shade Nubiterm NK-38 High heat fastness orange shade
NB Ferro has not requested the REACH authorization for the use of Molybdate Oranges in the European Union
bull bull
bull bull
bull bull
bull bull
bull bull
MAIN CHARACTERISTICS
CuCr2O4
Pigment Black 28 (CI 77428)
Spinel Structure
Bluish deep shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light NIR absorbent
MAIN CHARACTERISTICS
Cr2O3
Pigment Green 17 ( CI 77288)
Hematite structure
Brownish to bluish black shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with high NIR reflectance (ldquocoolrdquo pigment)
PG17 CHROMIUM
GREEN-BLACK HEMATITE
BLACK PBk28 COPPER CHROMITE BLACK SPINEL
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS V-7709 Standard grade V-7710 Standard grade
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineer-ing Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness Light fastness
Weather fastness Acid fastness Alkali fastness Solvent fastness
gt500oC 5 min Excellent (8 on blue wool scale) Excellent (5 on grey scale) Excellent Excellent Excellent
RECOMMENDED PRODUCTS V-772 Reddish shade V-775 The most bluish shade
V-774 High tinting strength bluish shade
bull bull
bull bull
bull bull
bull bull
bull bull
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with high NIR reflectance (ldquocoolrdquo pigment)
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
MAIN CHARACTERISTICS
(CrFe)2O3
Pigment Brown 29 (CI 77500)
Hematite structure
Brownish to bluish black shade
MAIN CHARACTERISTICS MANGANESE CHROME IRON
Ease of dispersion
MnFe2O4
Pigment Black 26 (CI 77494)
Spinel structure
Very bluishdeep shade the strongest black CICP
Ease of dispersion
SPINEL
PBk26 FERRITE BLACK BROWN
PBr29
HEMATITE
BLACK
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS 10466 Reddish shade V-780 Strong reddish shade
V-760 Yellowish shade V-781 Strong reddish shade
V-778 Yellowish shade V-785 The most bluish shade
V-778-2 Yellow reddish shade V-10121-2 Dark brown
Excellent dimensional stability no warping no shrinkage
Opaque to visible light UVNIR absorbent
The black CICP with the highest heat fastness
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness gt500oC 5 min Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS F-6331-2 High tinting strength very bluish shade
bull bull
bull bull
bull
bull bull
bull
bull bull
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with moderate NIR reflectance (ldquocoolrdquo pigment)
Used when neither Carbon Black nor Black Iron Oxide can be used for technical reasons
PBk11 IRON OXIDE
BLACK
BLACK MAIN CHARACTERISTICS
MnFe2O
PBk33
4
Pigment Black 33 (CI 77537)
Hematite structure
Brownish to bluish black shade
Ease of dispersion
MANGANESE FERRITE BLACK OXIDE
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
Heat fastness 180oC 5 min Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS 24-3303 Reddish shade Nubifer NB-803K Bluish shade
MAIN CHARACTERISTICS
Fe3O4
Pigment Black 11 (CI 77499)
Magnetite structure
Bluish black shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light NIR absorbent
Suitable for low processing temperature Polyolefins PVC (just unplasticized compounds the more stabilized the PVC is the more suitable conventional Black Iron Oxides become) and Rubber
RECOMMENDED PRODUCTS Nubifer NB-5970 Micronized high tinting strength very bluish shade
COOL PIGMENTS MAIN CHARACTERISTICS
It is well known that under the sun dark surfaces become hot and white surfaces remain cooler When comparing a white plastic part containing TiO2 (Near Infrared -NIR- reflecting pigment) with a black plastic part containing Carbon Black (Near Infrared -NIR- absorbent pigment) the surface temperature difference can reach more than 30degC on a hot sunny day This common effect is not only related to color but also to NIR absorption of the pigments used in a particular application By using the appropriate pigments even dark surfaces can stay cool under the sun This type of pigments also referred to as Cool Pigments do not absorb the NIR portion of wavelengths coming from sunlight There are 2 types of Cool Pigments NIR reflecting pigments and NIR transparent pigments The final behavior of the latter will be influenced by the entire system therefore when using NIR transparent pigments it is recommended to use them in combination with NIR reflecting pigments or substrates Ferro Pigments has a full range of Cool Pigments and many years of experience developing projects in this field so we are the ideal partner to support you in your cool projects
MAIN APPLICATIONS AND BENEFITS APPLICATIONS
PVC applications eg siding window profiles
Agricultural film
Plastic roof tiles
Sport fields and synthetic turfartificial grass
Automotive applications eg dashboards steering wheels upholstery
Fiber applications eg garment carpets
Single ply roofing systems
Black coloration of plastics to be recycled by NIR sensor sorting systems
BENEFITS
Increased service life due to less thermal stress on the plastic parts
Reduced air conditioning and energy consumption
Increased comfort Increased Health and Safety
Increased protection against thermal degradation of goods packaged with ldquocoolrdquo plastics
Recycle black parts to create economical value and reduce waste disposal
Ferro offers a full range of Cool Pigments in the whole color spectrum
MAIN PRODUCTS
bull bull bull bull bull
bull
bull bullbullbull
bull
regFERRO Where innovation delivers performancetrade
COOL PIGMENTS FERRO COOL PIGMENTS COLOR SPACE
COOL PIGMENTS (High NIR Reflectance) PY53 Nickel Antimony Titanium
Yellow Rutile
PBr24 Chrome Antimony Titanium Buff Rutile
PY184 Bismuth Vanadate
PG17 Chromium Green-Black Hematite
PY184 PG17 Chrome Oxide Green
PBr29 Chrome Iron Brown Hematite
PY164 Manganese Antimony Titanium Buff Rutile
PBr24PY53
COOL PIGMENTS PBk12 (Moderate NIR Reflectance PY119 PR101or NIR transparency)
PG50 PG17 Transparent to NIR PY164
PG50 PG26Ni Free PBk12 Iron Titanium Brown Spinel PBr29 PB28 Cobalt Aluminate Blue PBk33PB28 PG17
Spinel Turquoise PB36 PB36 Cobalt Chromite Blue-Green Turquoise
Spinel
PBk33 Manganese Ferrite Black Oxide
PG26 Cobalt Chromite Green PV15 PB36 Spinel
PG50 Cobalt Titanate Green PB28 Spinel
PR101 Iron Oxide Red PB29PY119 Zinc Ferrite Brown Spinel
PB29 Ultramarine Blue
PV15 Ultramarine Violet
regFERRO Where innovation delivers performancetrade
FERRO PIGMENTS FOR PLASTICS
About Ferro Corporation
Ferro Corporation (NYSE FOE) is a leading global supplier of technology-based performance materials including glass-based coatings pigments and colors and polishing materials Ferro products are sold into the building and construction automotive appliances electronics household furnishings and industrial products markets The Company is headquartered in Mayfield Heights Ohio USA
Our Values and behaviors
CUSTOMER FOCUS Our customers are why we exist We build relationships with internal and external customers that are built on trust a desire to understand their needs and challenges and a genuine interest in making them more successful
ACCOUNTABILITY FOR PERFORMANCE As individuals and teams we work to achieve the highest performance standards We prioritize safety and environmental stewardship providing high-value solutions for our customers and creating value for Ferrorsquos shareholders
INNOVATIVE THINKING We encourage our associates to seek out new ideas for technologies and business processes and to always look for ways to improve and to better serve our customers
TEAMWORK AND COLLABORATION We are committed to a work environment that promotes trust mutual respect teamwork and collaboration and that focuses on consistently delivering value to our customers and shareholders
PB29 middot Nubix G-58
PB29 Nubiperf H-56FCP-H
PB29 Nubiperf FG-75FCP-G
PB29 Nubiperf F36FCP-R
PB29 middot Nubiperf SRO
PB29 middot Nubiperf AR
PB28middot10466
PB28middot10336
PB36 middot V-9242
PB36 middot V-9248
PB36 middot F-5686
PG50 middot V-9229
Violet bull 28-5333
PV15 middot Nubix V-5
PV15 middot Nubix V-8
PV15 middot Nubix V-40
PV15 middot Nubix V-60
PG50 middot 21-5801
PG50 middot 21-5901
PG50 middot 21-4345
PG50 middot V-11633
PG50 middot SPP-6008
PG26 middot V-12600
PG17 middot Nubicrom 02
PG17 middot SMM-7
PG17 middot SMM-4
PY53 middot 10401
PY184 middot Nubivan Y-901
PY34 PY119 middot Nubifer Y-805K PR101 middot Nubifer R-5530 PBk26 middot F-6331-2 Nubiterm AK-81
PY34 PY119 middot Nubifer Y-905K PBk33 middot 24-3303 Nubiterm AK-74
PR101 bull Nubifer R-5540
Vgt c
Vgt
iii C
[o0 c
PBr24 middot 10406 PBk33 g E
Nubifer NB-803K 0-~ C
middots c I iii 3 0 c
Vgt
gt E Vgt
PBr24 middot 10408 PBr29 middot 10466 sect ~ C middot Q c 0
0 0 u c
PBr24 middot V-12112 PR101 middot Nubifer R-5501 PG17 bull V-774
PY164 middot 10550 PR101 middot Nubifer R-5560
PBr29 middot V-10121-2 PR101 middot Nubifer R-5580C
PR104 middot NRC-36
PR101 middot Nubifer R-5510 PR104 Nubiterm NK-38
PY42 middot Nubifer Y-7050 PG17 middot V-775
PR101 middot Nubifer R-5520 PBk28 middot V-7710 PBk12 bull 10358 PBkll middot Nubifer NB-5970
bull
bull
bull
bull
MAIN CHARACTERISTICS
Sodium Aluminum Sulfosilicate Na [(AlSi) ]O (S )8-x 12 24 y 2
Pigment Blue 29 (CI 77007)
Unique reddish blue shade
Excellent ability to make whites ldquowhiterrdquo greys bluer and blacks ldquojetterdeeperrdquo
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Semitransparent to visible light transparent to NIR (ldquocoolrdquo pigment but its cool performance will be highly dependent on substrate and formulation)
BLUE PB29 ULTRAMARINE BLUE
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers PVC Silicones and Rubber
Heat fastness 350oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (4-5 on grey scale) Acid fastness Low except acid resistant series Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS
Nubix SERIES The high dispersibility narrow colorimetric tolerance low moisture and low free Sulfur content Ultramarine Blues
Nubiperf SERIES The very high dispersibility narrow colorimetric tolerance low moisture and low free Sulfur content Ultramarine Blues
Nubiperf SRD The Super Reddish Ultramarine Blue to 1) reach unique reddish blue shades 2) avoid the use of tiny problematic amounts of red violet organic pigments to shade blues 3) tint whites and reduce polymerrsquos yellowness with a unique neutral shade
Nubiflow
The very high dispersibility narrow colorimetric tolerance low moisture and low free Sulfur content Ultramarine Blue specially recommended for fibers and very thin films
Nubiperf FCP SERIES (Food and Cosmetics Packaging)
The very low free Sulfur content very high dispersibility narrow colorimetric tolerance and low moisture content Ultramarine Blues specially recommended for sensitive to odor and taste applications
Nubiperf AR (new generation Acid Resistant grade) Encapsulated grade that shows high acid resistance in use and good dispersibility specially recommended for PVC POM or any other polymer in contact with acids or that can release acids during service life
LD SERIES (Low Dust)
Combinations of Ultramarine Blues with a Polyethylene wax to enhance processing and free-flow performance mostly in Polyolefins
bull bull
bull bull
bull bull
bull bull
bull bull
BLUEPB28 COBALT ALUMINATE BLUE SPINEL
PB36 COBALT
CHROMITE BLUE-GREEN
SPINEL
MAIN CHARACTERISTICS
CoAl2O4
Pigment Blue 28 (CI 77346)
Spinel structure
Reddish blue shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
UV transparent opaque to visible light with moderate NIR reflectance (ldquocoolrdquo pigment)
MAIN CHARACTERISTICS
Co(AlCr)2O4
Pigment Blue 36 (CI 77343)
Spinel structure
Greenish blue shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
UV transparent opaque to visible light with moderate NIR reflectance (ldquocoolrdquo pigment)
BLUE
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS V-3285 Standard grade 10446 High tinting strength reddish shade
10336 High tinting strength reddish shade V-9250 High tinting strength reddish shade
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS V-9242 Standard grade F-5686 Turquoise Blue greenish shade
V-9248 High tinting strength
bull bull
bull
bull
bull bull
PV15 ULTRAMARINE VIOLET
Heat fastness 300oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (4-5 on grey scale) Acid fastness Low Alkali fastness High Solvent fastness Excellent
MAIN CHARACTERISTICS Sodium Aluminum Sulfosilicate Na8-x[(AlSi)12]O24(Sy)2
Pigment Violet 15 (CI 77007)
Unique violet shades
Excellent dimensional stability no warping no shrinkage
Semitransparent to visible light transparent to NIR (ldquocoolrdquo pigment but its cool performance will be highly dependent on substrate and formulation)
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers PVC Silicones and Rubber
MAIN CHARACTERISTICS Sr5(PO4)3Cu03O
Apatite structure
Unique violet shade
Suitable for replacing PV23 in applications that require high weather fastness
Excellent ability to make whites ldquowhiterrdquo
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Semitransparent to visible light NIR absorbent
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness High
Alkali fastness High Solvent fastness Excellent
VIOLET STRONTIUM PHOSPHATE
VIOLET
RECOMMENDED PRODUCTS Nubix SERIES Nubix V-5 Bluish shade
The high dispersibility narrow colorimetric tolerance low moisture and low free Sulfur
Nubix V-8 High tinting strength unique blue shade
Nubix V-40 High tinting strength unique reddish shade
content Ultramarine Violets Nubix V-60 Reddishpink shade
RECOMMENDED PRODUCTS 28-5333 Standard grade
(pending TSCA inventory)
bull
bull
bull bull
middotmiddotmiddot
middot- - -middotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddot-middot middot-
middotmiddotmiddotmiddotmiddotmiddot- middotmiddotmiddotmiddotmiddotmiddotmiddot- middotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddot-middotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddot-middotmiddotmiddotmiddot middot-middotmiddotmiddotmiddot
bull bull
PG17 CHROME OXIDE GREEN
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
MAIN CHARACTERISTICS
CoCr2O4
Pigment Green 26 (CI 77344)
Spinel structure
Dark bluish green shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with moderate NIR reflectance (ldquocoolrdquo pigment)
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
MAIN CHARACTERISTICS
Cr2O3
Pigment Green 17 (CI 77288)
PrismaticRhombohedral structure
Olive green shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with high NIR reflectance (ldquocoolrdquo pigment)
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness 500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
PG26 COBALT
CHROMITE GREEN SPINEL
GREEN
RECOMMENDED PRODUCTS SMM SERIES Nubicrom SERIES The micronized Chrome Oxide Greens The highly micronizedhigh dispersibility
Chrome Oxide Greens SMM-4 Bluish shade
SMM-6 Yellowish shade Nubicrom 02 Yellowish shade
SMM-7 Yellowish shade
RECOMMENDED PRODUCTS V-12600 Camouflage Green bluish shade V-12604 Camouflage Green yellowish shade
bull
bull
bull
bull
bull
PG50 COBALT TITANATE GREEN SPINEL
MAIN CHARACTERISTICS
Co2TiO4
Pigment Green 50 (CI 77377)
Spinel structure
Bright green shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque with moderate NIR reflectance (ldquocoolrdquo pigment)
Ni free products available
GREEN
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS V-11633 Standard grade 21-5901 Ni free (CMR classification free)
yellowish shade 21-4030 High tinting strength bluish shade 21-4345 Ni free (CMR classification free) 21-5801 Ni free (CMR classification free)
color like 21-4045 bluish shade
V-9229 Turquoise Blue greenish shade
bull
bull bull
bull bull
bull bull
bull bull
bull bull
YYYYEEEELLLLLLLLOOOOWWWW PY53 NICKEL ANTIMONY MAIN CHARACTERISTICS TITANIUM
(TiNiSb) O2YELLOW RUTILE Pigment Yellow 53 (CI 77788)
Rutile structure
Light yellow shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with high NIR reflectance (ldquocoolrdquo pigment)
BISMUTH VANADATE
PY184 MAIN CHARACTERISTICS
BiVO4
Pigment Yellow 184 (CI 771740)
Bright primrose yellow shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with high NIR reflectance (ldquocoolrdquo pigment)
Possible replacement of Chrome Yellows in combination with Organics
Possible replacement of Chrome Yellows in combination with Organics
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
Suitable for low processing temperature Polyolefins PVC and Rubber
Heat fastness 220oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent () IMPORTANT NOTE
For high heat fastness Bismuth Vanadates please check our available products in our legacy Cappelle pigments brochure
RECOMMENDED PRODUCTS 10401 Standard grade V-9412 Strong greenish shade
V-9415 Standard greenish shade V-9416 Unique reddish shade
RECOMMENDED PRODUCTS Nubivan Y-901 Standard grade very greenish
bull
bull
bull
bull
bull
bull
bull
bull
~
bull
bull
MAIN CHARACTERISTICS
PbCrO4
Pigment Yellow 34 (CI 77603)
Ease of dispersion
Opaque to visible light
PY34 CHROME YELLOW
YELLOW RECOMMENDED PRODUCTS AD-74 Conventional middle yellow Nubiterm AK-74 High heat fastness PbSO4 middle yellow AD-81 Conventional lemon yellow
Nubiterm AK-81 High heat fastness AL-90 Conventional primrose yellow Monoclinic to Rhombic structure depending on shade lemon yellow
Bright yellow shade (middle lemon and primrose) NB Ferro has not requested the REACH authorization for the use of Chrome Yellows in the European Union
Excellent dimensional stability no warping no shrinkage
Suitable for Polyolefins PS ABS Engineering Polymers (depending on processing temperature) PVC and Rubber
CONVENTIONAL (LD) Heat fastness 180oC 5 min SERIES Light fastness MiddleLemon = Fair Primrose = Low
Weather fastness MiddleLemon = Medium Primrose = Low
Acid fastness Fair Alkali fastness Low
Solvent fastness Excellent
RESISTANT (RS) SERIES Heat fastness 220-260oC 5 min
Light fastness MiddleLemon = High Primrose = Fair Weather fastness MiddleLemon = High Primrose = Fair Acid fastness High
Alkali fastness Low
Solvent fastness Excellent
Nubiterm K SERIES Heat fastness 300oC 5 min
Light fastness High
Weather fastness High Acid fastness High
Alkali fastness Low
Solvent fastness Excellent
bull
bull
bull bull
bull bull
bull bull
bull bull
bull
bull bull
BUFF PBr24 CHROME MAIN CHARACTERISTICS ANTIMONY
(TiCrSb) O2TITANIUM BUFF RUTILE Pigment Brown 24 (CI 77310)
Rutile structure
Clean buff shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with high NIR reflectance (ldquocoolrdquo pigment)
Possible replacement of Chrome Yellows in combination with Organics
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS 10406 Standard grade yellowish shade V-9118 Yellowish shade
10408 Standard grade reddish shade V-12112 High tinting strength reddish shade
10411 Strong greenish shade 10657 High tinting strength reddish blue
MAIN CHARACTERISTICS
FeOOH
Pigment Yellow 42 (CI 77492)
Goethite structure
Dull buff shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with low NIR reflectance
PY42 IRON OXIDE
YELLOW
Possible replacement of Chrome Yellows in combination with Organics
Good coloristics to combine with Organics and Inorganics to reach specific colors at very competitive cost eg natural greens bright reds chocolate browns light beiges
Conventional grades are suitable for low processing temperature Polyolefins PVC (just unplasticized compounds the more stabilized the PVC is the more suitable conventional Yellow Iron Oxides become) and Rubber Nubifer Y-7050 is suitable for medium processing temperature Polyolefins PS ABS PVC (plasticized and unplasticized compounds the more stabilized the PVC is the more suitable Nubifer Y-7050 becomes) and Rubber
Heat fastness 160oC 5 min except Nubifer Y-7050 (260oC 5 min)
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS Nubifer Y-5000 SERIES Nubifer Y-7000 SERIES The micronizedhigh dispersibilitynarrow The micronized higher heat fastness than colorimetric tolerance Yellow Iron Oxides conventional Yellow Iron Oxides
Nubifer Y-5010 Light shade Nubifer Y-7050 Encapsulated grade for medium processing Nubifer Y-5021 Reddish shade temperature resins (heat fastness = 260degC 5 min) and PVC (more suitable for unplasticized PVC compounds than conventional Yellow Iron Oxides)
bull
bull
bull
bull
bull
bull
bull
bull
PY119 ZINC FERRITE BROWN SPINEL
MAIN CHARACTERISTICS
ZnFe2O4
Pigment Yellow 119 (CI 77496)
Spinel structure
Reddish buff shade
Ease of dispersion
(ldquocoolrdquo pigment)
BUFFBUFFBUFF
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with moderate NIR reflectance
Possible replacement of Chrome Yellows in combination with Organics
Good coloristics to combine with Organics and Inorganics to reach specific colors at very competitive cost eg natural greens bright reds chocolate browns light beiges
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers PVC Silicones and Rubber
Heat fastness Nubifer Y-805K (300oC 5 min) Nubifer Y-905K (260oC 5 min)
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS Nubifer Y-805K 10520 Very high heat fastness spinel Very high heat fastness yellowish shade (300degC 5 min) dark reddish shade V-9117 Very high heat fastness spinel Nubifer Y-905K yellowish shade High heat fastness (260degC 5 min) light yellowish shade
bull
bull bull
bull bull
bull bull
bull bull
BBBUUUFFFFFF PY164 MANGANESE MAIN CHARACTERISTICS ANTIMONY
(TiMnSb) O2TITANIUM BUFF RUTILE Pigment Yellow 164 ( CI 77899)
Dark brown shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with high NIR reflectance (ldquocoolrdquo pigment)
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fast Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS 10550 Standard grade V-12100 Bluish shade
MAIN CHARACTERISTICS
Fe2TiO4
Pigment Black 12 (CI 77543)
Buff shade similar to PBr24 without containing Cr3+
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with moderate NIR reflectance (ldquocoolrdquo pigment)
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
PBk12 IRON
TITANIUM BROWN
SPINEL
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS 10358 Standard grade
bull
bull
bull bull
bull bull
- - -_middotmiddotmiddotmiddot - ---
~_ bullbullbullbull ------- - -~~
bull
bull
MAIN CHARACTERISTICS Fe2O3
Pigment Red 101 (CI 77491)
Hematite structure
Dull red shade
Ease of dispersion
MAIN CHARACTERISTICS PbCrO4PbSO4PbMoO4
Pigment Red 104 (CI 77605)
Tetragonal structure
Bright red shade (orange scarlet and red)
Ease of dispersion
PR104 MOLYBDATE
ORANGE
PR101 IRON OXIDE RED
RED
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with moderate NIR reflectance (ldquocoolrdquo pigment)
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC (plasticized and unplasticized compounds the more stabilized the PVC is the more suitable Red Iron Oxides become) Silicones and Rubber
Heat fastness 500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS Nubifer R-5500 SERIES
The micronizedhigh dispersibilitynarrow colorimetric tolerance Red Iron Oxides
Nubifer R-5501 Nubifer R-5510 Nubifer R-5520 Nubifer R-5530
The most yellowishlightest shade
Yellowish shade
Yellowish-medium shade
Yellowish-medium shade
Nubifer R-5540 Bluish-medium shade
Nubifer R-5560 Bluish-medium shade
Nubifer R-5580C The most bluishdarkest shade
Excellent dimensional stability no warping no shrinkage
Opaque to visible light
Suitable for Polyolefins PS ABS Engineering Polymers (depending on processing temperature) PVC and Rubber
Heat fastness 180o - 200o C 5 min SERIES Light fastness Fair
Weather fastness Fair Acid fastness Fair Alkali fastness Low Solvent fastness Excellent
CONVENTIONAL (L)
RESISTANT (RS) Heat fastness 240o - 260o C 5 min SERIES Light fastness High
Weather fastness High Acid fastness High Alkali fastness Low Solvent fastness Excellent
Nubiterm K SERIES Heat fastness 300o C 5 min Light fastness High Weather fastness High Acid fastness High Alkali fastness Low Solvent fastness Excellent
RECOMMENDED PRODUCTS NRC-36 Resistant scarlet shade Nubiterm NK-38 High heat fastness orange shade
NB Ferro has not requested the REACH authorization for the use of Molybdate Oranges in the European Union
bull bull
bull bull
bull bull
bull bull
bull bull
MAIN CHARACTERISTICS
CuCr2O4
Pigment Black 28 (CI 77428)
Spinel Structure
Bluish deep shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light NIR absorbent
MAIN CHARACTERISTICS
Cr2O3
Pigment Green 17 ( CI 77288)
Hematite structure
Brownish to bluish black shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with high NIR reflectance (ldquocoolrdquo pigment)
PG17 CHROMIUM
GREEN-BLACK HEMATITE
BLACK PBk28 COPPER CHROMITE BLACK SPINEL
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS V-7709 Standard grade V-7710 Standard grade
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineer-ing Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness Light fastness
Weather fastness Acid fastness Alkali fastness Solvent fastness
gt500oC 5 min Excellent (8 on blue wool scale) Excellent (5 on grey scale) Excellent Excellent Excellent
RECOMMENDED PRODUCTS V-772 Reddish shade V-775 The most bluish shade
V-774 High tinting strength bluish shade
bull bull
bull bull
bull bull
bull bull
bull bull
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with high NIR reflectance (ldquocoolrdquo pigment)
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
MAIN CHARACTERISTICS
(CrFe)2O3
Pigment Brown 29 (CI 77500)
Hematite structure
Brownish to bluish black shade
MAIN CHARACTERISTICS MANGANESE CHROME IRON
Ease of dispersion
MnFe2O4
Pigment Black 26 (CI 77494)
Spinel structure
Very bluishdeep shade the strongest black CICP
Ease of dispersion
SPINEL
PBk26 FERRITE BLACK BROWN
PBr29
HEMATITE
BLACK
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS 10466 Reddish shade V-780 Strong reddish shade
V-760 Yellowish shade V-781 Strong reddish shade
V-778 Yellowish shade V-785 The most bluish shade
V-778-2 Yellow reddish shade V-10121-2 Dark brown
Excellent dimensional stability no warping no shrinkage
Opaque to visible light UVNIR absorbent
The black CICP with the highest heat fastness
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness gt500oC 5 min Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS F-6331-2 High tinting strength very bluish shade
bull bull
bull bull
bull
bull bull
bull
bull bull
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with moderate NIR reflectance (ldquocoolrdquo pigment)
Used when neither Carbon Black nor Black Iron Oxide can be used for technical reasons
PBk11 IRON OXIDE
BLACK
BLACK MAIN CHARACTERISTICS
MnFe2O
PBk33
4
Pigment Black 33 (CI 77537)
Hematite structure
Brownish to bluish black shade
Ease of dispersion
MANGANESE FERRITE BLACK OXIDE
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
Heat fastness 180oC 5 min Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS 24-3303 Reddish shade Nubifer NB-803K Bluish shade
MAIN CHARACTERISTICS
Fe3O4
Pigment Black 11 (CI 77499)
Magnetite structure
Bluish black shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light NIR absorbent
Suitable for low processing temperature Polyolefins PVC (just unplasticized compounds the more stabilized the PVC is the more suitable conventional Black Iron Oxides become) and Rubber
RECOMMENDED PRODUCTS Nubifer NB-5970 Micronized high tinting strength very bluish shade
COOL PIGMENTS MAIN CHARACTERISTICS
It is well known that under the sun dark surfaces become hot and white surfaces remain cooler When comparing a white plastic part containing TiO2 (Near Infrared -NIR- reflecting pigment) with a black plastic part containing Carbon Black (Near Infrared -NIR- absorbent pigment) the surface temperature difference can reach more than 30degC on a hot sunny day This common effect is not only related to color but also to NIR absorption of the pigments used in a particular application By using the appropriate pigments even dark surfaces can stay cool under the sun This type of pigments also referred to as Cool Pigments do not absorb the NIR portion of wavelengths coming from sunlight There are 2 types of Cool Pigments NIR reflecting pigments and NIR transparent pigments The final behavior of the latter will be influenced by the entire system therefore when using NIR transparent pigments it is recommended to use them in combination with NIR reflecting pigments or substrates Ferro Pigments has a full range of Cool Pigments and many years of experience developing projects in this field so we are the ideal partner to support you in your cool projects
MAIN APPLICATIONS AND BENEFITS APPLICATIONS
PVC applications eg siding window profiles
Agricultural film
Plastic roof tiles
Sport fields and synthetic turfartificial grass
Automotive applications eg dashboards steering wheels upholstery
Fiber applications eg garment carpets
Single ply roofing systems
Black coloration of plastics to be recycled by NIR sensor sorting systems
BENEFITS
Increased service life due to less thermal stress on the plastic parts
Reduced air conditioning and energy consumption
Increased comfort Increased Health and Safety
Increased protection against thermal degradation of goods packaged with ldquocoolrdquo plastics
Recycle black parts to create economical value and reduce waste disposal
Ferro offers a full range of Cool Pigments in the whole color spectrum
MAIN PRODUCTS
bull bull bull bull bull
bull
bull bullbullbull
bull
regFERRO Where innovation delivers performancetrade
COOL PIGMENTS FERRO COOL PIGMENTS COLOR SPACE
COOL PIGMENTS (High NIR Reflectance) PY53 Nickel Antimony Titanium
Yellow Rutile
PBr24 Chrome Antimony Titanium Buff Rutile
PY184 Bismuth Vanadate
PG17 Chromium Green-Black Hematite
PY184 PG17 Chrome Oxide Green
PBr29 Chrome Iron Brown Hematite
PY164 Manganese Antimony Titanium Buff Rutile
PBr24PY53
COOL PIGMENTS PBk12 (Moderate NIR Reflectance PY119 PR101or NIR transparency)
PG50 PG17 Transparent to NIR PY164
PG50 PG26Ni Free PBk12 Iron Titanium Brown Spinel PBr29 PB28 Cobalt Aluminate Blue PBk33PB28 PG17
Spinel Turquoise PB36 PB36 Cobalt Chromite Blue-Green Turquoise
Spinel
PBk33 Manganese Ferrite Black Oxide
PG26 Cobalt Chromite Green PV15 PB36 Spinel
PG50 Cobalt Titanate Green PB28 Spinel
PR101 Iron Oxide Red PB29PY119 Zinc Ferrite Brown Spinel
PB29 Ultramarine Blue
PV15 Ultramarine Violet
PB29 middot Nubix G-58
PB29 Nubiperf H-56FCP-H
PB29 Nubiperf FG-75FCP-G
PB29 Nubiperf F36FCP-R
PB29 middot Nubiperf SRO
PB29 middot Nubiperf AR
PB28middot10466
PB28middot10336
PB36 middot V-9242
PB36 middot V-9248
PB36 middot F-5686
PG50 middot V-9229
Violet bull 28-5333
PV15 middot Nubix V-5
PV15 middot Nubix V-8
PV15 middot Nubix V-40
PV15 middot Nubix V-60
PG50 middot 21-5801
PG50 middot 21-5901
PG50 middot 21-4345
PG50 middot V-11633
PG50 middot SPP-6008
PG26 middot V-12600
PG17 middot Nubicrom 02
PG17 middot SMM-7
PG17 middot SMM-4
PY53 middot 10401
PY184 middot Nubivan Y-901
PY34 PY119 middot Nubifer Y-805K PR101 middot Nubifer R-5530 PBk26 middot F-6331-2 Nubiterm AK-81
PY34 PY119 middot Nubifer Y-905K PBk33 middot 24-3303 Nubiterm AK-74
PR101 bull Nubifer R-5540
Vgt c
Vgt
iii C
[o0 c
PBr24 middot 10406 PBk33 g E
Nubifer NB-803K 0-~ C
middots c I iii 3 0 c
Vgt
gt E Vgt
PBr24 middot 10408 PBr29 middot 10466 sect ~ C middot Q c 0
0 0 u c
PBr24 middot V-12112 PR101 middot Nubifer R-5501 PG17 bull V-774
PY164 middot 10550 PR101 middot Nubifer R-5560
PBr29 middot V-10121-2 PR101 middot Nubifer R-5580C
PR104 middot NRC-36
PR101 middot Nubifer R-5510 PR104 Nubiterm NK-38
PY42 middot Nubifer Y-7050 PG17 middot V-775
PR101 middot Nubifer R-5520 PBk28 middot V-7710 PBk12 bull 10358 PBkll middot Nubifer NB-5970
bull
bull
bull
bull
MAIN CHARACTERISTICS
Sodium Aluminum Sulfosilicate Na [(AlSi) ]O (S )8-x 12 24 y 2
Pigment Blue 29 (CI 77007)
Unique reddish blue shade
Excellent ability to make whites ldquowhiterrdquo greys bluer and blacks ldquojetterdeeperrdquo
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Semitransparent to visible light transparent to NIR (ldquocoolrdquo pigment but its cool performance will be highly dependent on substrate and formulation)
BLUE PB29 ULTRAMARINE BLUE
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers PVC Silicones and Rubber
Heat fastness 350oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (4-5 on grey scale) Acid fastness Low except acid resistant series Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS
Nubix SERIES The high dispersibility narrow colorimetric tolerance low moisture and low free Sulfur content Ultramarine Blues
Nubiperf SERIES The very high dispersibility narrow colorimetric tolerance low moisture and low free Sulfur content Ultramarine Blues
Nubiperf SRD The Super Reddish Ultramarine Blue to 1) reach unique reddish blue shades 2) avoid the use of tiny problematic amounts of red violet organic pigments to shade blues 3) tint whites and reduce polymerrsquos yellowness with a unique neutral shade
Nubiflow
The very high dispersibility narrow colorimetric tolerance low moisture and low free Sulfur content Ultramarine Blue specially recommended for fibers and very thin films
Nubiperf FCP SERIES (Food and Cosmetics Packaging)
The very low free Sulfur content very high dispersibility narrow colorimetric tolerance and low moisture content Ultramarine Blues specially recommended for sensitive to odor and taste applications
Nubiperf AR (new generation Acid Resistant grade) Encapsulated grade that shows high acid resistance in use and good dispersibility specially recommended for PVC POM or any other polymer in contact with acids or that can release acids during service life
LD SERIES (Low Dust)
Combinations of Ultramarine Blues with a Polyethylene wax to enhance processing and free-flow performance mostly in Polyolefins
bull bull
bull bull
bull bull
bull bull
bull bull
BLUEPB28 COBALT ALUMINATE BLUE SPINEL
PB36 COBALT
CHROMITE BLUE-GREEN
SPINEL
MAIN CHARACTERISTICS
CoAl2O4
Pigment Blue 28 (CI 77346)
Spinel structure
Reddish blue shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
UV transparent opaque to visible light with moderate NIR reflectance (ldquocoolrdquo pigment)
MAIN CHARACTERISTICS
Co(AlCr)2O4
Pigment Blue 36 (CI 77343)
Spinel structure
Greenish blue shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
UV transparent opaque to visible light with moderate NIR reflectance (ldquocoolrdquo pigment)
BLUE
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS V-3285 Standard grade 10446 High tinting strength reddish shade
10336 High tinting strength reddish shade V-9250 High tinting strength reddish shade
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS V-9242 Standard grade F-5686 Turquoise Blue greenish shade
V-9248 High tinting strength
bull bull
bull
bull
bull bull
PV15 ULTRAMARINE VIOLET
Heat fastness 300oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (4-5 on grey scale) Acid fastness Low Alkali fastness High Solvent fastness Excellent
MAIN CHARACTERISTICS Sodium Aluminum Sulfosilicate Na8-x[(AlSi)12]O24(Sy)2
Pigment Violet 15 (CI 77007)
Unique violet shades
Excellent dimensional stability no warping no shrinkage
Semitransparent to visible light transparent to NIR (ldquocoolrdquo pigment but its cool performance will be highly dependent on substrate and formulation)
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers PVC Silicones and Rubber
MAIN CHARACTERISTICS Sr5(PO4)3Cu03O
Apatite structure
Unique violet shade
Suitable for replacing PV23 in applications that require high weather fastness
Excellent ability to make whites ldquowhiterrdquo
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Semitransparent to visible light NIR absorbent
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness High
Alkali fastness High Solvent fastness Excellent
VIOLET STRONTIUM PHOSPHATE
VIOLET
RECOMMENDED PRODUCTS Nubix SERIES Nubix V-5 Bluish shade
The high dispersibility narrow colorimetric tolerance low moisture and low free Sulfur
Nubix V-8 High tinting strength unique blue shade
Nubix V-40 High tinting strength unique reddish shade
content Ultramarine Violets Nubix V-60 Reddishpink shade
RECOMMENDED PRODUCTS 28-5333 Standard grade
(pending TSCA inventory)
bull
bull
bull bull
middotmiddotmiddot
middot- - -middotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddot-middot middot-
middotmiddotmiddotmiddotmiddotmiddot- middotmiddotmiddotmiddotmiddotmiddotmiddot- middotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddot-middotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddot-middotmiddotmiddotmiddot middot-middotmiddotmiddotmiddot
bull bull
PG17 CHROME OXIDE GREEN
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
MAIN CHARACTERISTICS
CoCr2O4
Pigment Green 26 (CI 77344)
Spinel structure
Dark bluish green shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with moderate NIR reflectance (ldquocoolrdquo pigment)
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
MAIN CHARACTERISTICS
Cr2O3
Pigment Green 17 (CI 77288)
PrismaticRhombohedral structure
Olive green shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with high NIR reflectance (ldquocoolrdquo pigment)
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness 500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
PG26 COBALT
CHROMITE GREEN SPINEL
GREEN
RECOMMENDED PRODUCTS SMM SERIES Nubicrom SERIES The micronized Chrome Oxide Greens The highly micronizedhigh dispersibility
Chrome Oxide Greens SMM-4 Bluish shade
SMM-6 Yellowish shade Nubicrom 02 Yellowish shade
SMM-7 Yellowish shade
RECOMMENDED PRODUCTS V-12600 Camouflage Green bluish shade V-12604 Camouflage Green yellowish shade
bull
bull
bull
bull
bull
PG50 COBALT TITANATE GREEN SPINEL
MAIN CHARACTERISTICS
Co2TiO4
Pigment Green 50 (CI 77377)
Spinel structure
Bright green shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque with moderate NIR reflectance (ldquocoolrdquo pigment)
Ni free products available
GREEN
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS V-11633 Standard grade 21-5901 Ni free (CMR classification free)
yellowish shade 21-4030 High tinting strength bluish shade 21-4345 Ni free (CMR classification free) 21-5801 Ni free (CMR classification free)
color like 21-4045 bluish shade
V-9229 Turquoise Blue greenish shade
bull
bull bull
bull bull
bull bull
bull bull
bull bull
YYYYEEEELLLLLLLLOOOOWWWW PY53 NICKEL ANTIMONY MAIN CHARACTERISTICS TITANIUM
(TiNiSb) O2YELLOW RUTILE Pigment Yellow 53 (CI 77788)
Rutile structure
Light yellow shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with high NIR reflectance (ldquocoolrdquo pigment)
BISMUTH VANADATE
PY184 MAIN CHARACTERISTICS
BiVO4
Pigment Yellow 184 (CI 771740)
Bright primrose yellow shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with high NIR reflectance (ldquocoolrdquo pigment)
Possible replacement of Chrome Yellows in combination with Organics
Possible replacement of Chrome Yellows in combination with Organics
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
Suitable for low processing temperature Polyolefins PVC and Rubber
Heat fastness 220oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent () IMPORTANT NOTE
For high heat fastness Bismuth Vanadates please check our available products in our legacy Cappelle pigments brochure
RECOMMENDED PRODUCTS 10401 Standard grade V-9412 Strong greenish shade
V-9415 Standard greenish shade V-9416 Unique reddish shade
RECOMMENDED PRODUCTS Nubivan Y-901 Standard grade very greenish
bull
bull
bull
bull
bull
bull
bull
bull
~
bull
bull
MAIN CHARACTERISTICS
PbCrO4
Pigment Yellow 34 (CI 77603)
Ease of dispersion
Opaque to visible light
PY34 CHROME YELLOW
YELLOW RECOMMENDED PRODUCTS AD-74 Conventional middle yellow Nubiterm AK-74 High heat fastness PbSO4 middle yellow AD-81 Conventional lemon yellow
Nubiterm AK-81 High heat fastness AL-90 Conventional primrose yellow Monoclinic to Rhombic structure depending on shade lemon yellow
Bright yellow shade (middle lemon and primrose) NB Ferro has not requested the REACH authorization for the use of Chrome Yellows in the European Union
Excellent dimensional stability no warping no shrinkage
Suitable for Polyolefins PS ABS Engineering Polymers (depending on processing temperature) PVC and Rubber
CONVENTIONAL (LD) Heat fastness 180oC 5 min SERIES Light fastness MiddleLemon = Fair Primrose = Low
Weather fastness MiddleLemon = Medium Primrose = Low
Acid fastness Fair Alkali fastness Low
Solvent fastness Excellent
RESISTANT (RS) SERIES Heat fastness 220-260oC 5 min
Light fastness MiddleLemon = High Primrose = Fair Weather fastness MiddleLemon = High Primrose = Fair Acid fastness High
Alkali fastness Low
Solvent fastness Excellent
Nubiterm K SERIES Heat fastness 300oC 5 min
Light fastness High
Weather fastness High Acid fastness High
Alkali fastness Low
Solvent fastness Excellent
bull
bull
bull bull
bull bull
bull bull
bull bull
bull
bull bull
BUFF PBr24 CHROME MAIN CHARACTERISTICS ANTIMONY
(TiCrSb) O2TITANIUM BUFF RUTILE Pigment Brown 24 (CI 77310)
Rutile structure
Clean buff shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with high NIR reflectance (ldquocoolrdquo pigment)
Possible replacement of Chrome Yellows in combination with Organics
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS 10406 Standard grade yellowish shade V-9118 Yellowish shade
10408 Standard grade reddish shade V-12112 High tinting strength reddish shade
10411 Strong greenish shade 10657 High tinting strength reddish blue
MAIN CHARACTERISTICS
FeOOH
Pigment Yellow 42 (CI 77492)
Goethite structure
Dull buff shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with low NIR reflectance
PY42 IRON OXIDE
YELLOW
Possible replacement of Chrome Yellows in combination with Organics
Good coloristics to combine with Organics and Inorganics to reach specific colors at very competitive cost eg natural greens bright reds chocolate browns light beiges
Conventional grades are suitable for low processing temperature Polyolefins PVC (just unplasticized compounds the more stabilized the PVC is the more suitable conventional Yellow Iron Oxides become) and Rubber Nubifer Y-7050 is suitable for medium processing temperature Polyolefins PS ABS PVC (plasticized and unplasticized compounds the more stabilized the PVC is the more suitable Nubifer Y-7050 becomes) and Rubber
Heat fastness 160oC 5 min except Nubifer Y-7050 (260oC 5 min)
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS Nubifer Y-5000 SERIES Nubifer Y-7000 SERIES The micronizedhigh dispersibilitynarrow The micronized higher heat fastness than colorimetric tolerance Yellow Iron Oxides conventional Yellow Iron Oxides
Nubifer Y-5010 Light shade Nubifer Y-7050 Encapsulated grade for medium processing Nubifer Y-5021 Reddish shade temperature resins (heat fastness = 260degC 5 min) and PVC (more suitable for unplasticized PVC compounds than conventional Yellow Iron Oxides)
bull
bull
bull
bull
bull
bull
bull
bull
PY119 ZINC FERRITE BROWN SPINEL
MAIN CHARACTERISTICS
ZnFe2O4
Pigment Yellow 119 (CI 77496)
Spinel structure
Reddish buff shade
Ease of dispersion
(ldquocoolrdquo pigment)
BUFFBUFFBUFF
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with moderate NIR reflectance
Possible replacement of Chrome Yellows in combination with Organics
Good coloristics to combine with Organics and Inorganics to reach specific colors at very competitive cost eg natural greens bright reds chocolate browns light beiges
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers PVC Silicones and Rubber
Heat fastness Nubifer Y-805K (300oC 5 min) Nubifer Y-905K (260oC 5 min)
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS Nubifer Y-805K 10520 Very high heat fastness spinel Very high heat fastness yellowish shade (300degC 5 min) dark reddish shade V-9117 Very high heat fastness spinel Nubifer Y-905K yellowish shade High heat fastness (260degC 5 min) light yellowish shade
bull
bull bull
bull bull
bull bull
bull bull
BBBUUUFFFFFF PY164 MANGANESE MAIN CHARACTERISTICS ANTIMONY
(TiMnSb) O2TITANIUM BUFF RUTILE Pigment Yellow 164 ( CI 77899)
Dark brown shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with high NIR reflectance (ldquocoolrdquo pigment)
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fast Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS 10550 Standard grade V-12100 Bluish shade
MAIN CHARACTERISTICS
Fe2TiO4
Pigment Black 12 (CI 77543)
Buff shade similar to PBr24 without containing Cr3+
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with moderate NIR reflectance (ldquocoolrdquo pigment)
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
PBk12 IRON
TITANIUM BROWN
SPINEL
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS 10358 Standard grade
bull
bull
bull bull
bull bull
- - -_middotmiddotmiddotmiddot - ---
~_ bullbullbullbull ------- - -~~
bull
bull
MAIN CHARACTERISTICS Fe2O3
Pigment Red 101 (CI 77491)
Hematite structure
Dull red shade
Ease of dispersion
MAIN CHARACTERISTICS PbCrO4PbSO4PbMoO4
Pigment Red 104 (CI 77605)
Tetragonal structure
Bright red shade (orange scarlet and red)
Ease of dispersion
PR104 MOLYBDATE
ORANGE
PR101 IRON OXIDE RED
RED
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with moderate NIR reflectance (ldquocoolrdquo pigment)
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC (plasticized and unplasticized compounds the more stabilized the PVC is the more suitable Red Iron Oxides become) Silicones and Rubber
Heat fastness 500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS Nubifer R-5500 SERIES
The micronizedhigh dispersibilitynarrow colorimetric tolerance Red Iron Oxides
Nubifer R-5501 Nubifer R-5510 Nubifer R-5520 Nubifer R-5530
The most yellowishlightest shade
Yellowish shade
Yellowish-medium shade
Yellowish-medium shade
Nubifer R-5540 Bluish-medium shade
Nubifer R-5560 Bluish-medium shade
Nubifer R-5580C The most bluishdarkest shade
Excellent dimensional stability no warping no shrinkage
Opaque to visible light
Suitable for Polyolefins PS ABS Engineering Polymers (depending on processing temperature) PVC and Rubber
Heat fastness 180o - 200o C 5 min SERIES Light fastness Fair
Weather fastness Fair Acid fastness Fair Alkali fastness Low Solvent fastness Excellent
CONVENTIONAL (L)
RESISTANT (RS) Heat fastness 240o - 260o C 5 min SERIES Light fastness High
Weather fastness High Acid fastness High Alkali fastness Low Solvent fastness Excellent
Nubiterm K SERIES Heat fastness 300o C 5 min Light fastness High Weather fastness High Acid fastness High Alkali fastness Low Solvent fastness Excellent
RECOMMENDED PRODUCTS NRC-36 Resistant scarlet shade Nubiterm NK-38 High heat fastness orange shade
NB Ferro has not requested the REACH authorization for the use of Molybdate Oranges in the European Union
bull bull
bull bull
bull bull
bull bull
bull bull
MAIN CHARACTERISTICS
CuCr2O4
Pigment Black 28 (CI 77428)
Spinel Structure
Bluish deep shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light NIR absorbent
MAIN CHARACTERISTICS
Cr2O3
Pigment Green 17 ( CI 77288)
Hematite structure
Brownish to bluish black shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with high NIR reflectance (ldquocoolrdquo pigment)
PG17 CHROMIUM
GREEN-BLACK HEMATITE
BLACK PBk28 COPPER CHROMITE BLACK SPINEL
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS V-7709 Standard grade V-7710 Standard grade
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineer-ing Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness Light fastness
Weather fastness Acid fastness Alkali fastness Solvent fastness
gt500oC 5 min Excellent (8 on blue wool scale) Excellent (5 on grey scale) Excellent Excellent Excellent
RECOMMENDED PRODUCTS V-772 Reddish shade V-775 The most bluish shade
V-774 High tinting strength bluish shade
bull bull
bull bull
bull bull
bull bull
bull bull
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with high NIR reflectance (ldquocoolrdquo pigment)
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
MAIN CHARACTERISTICS
(CrFe)2O3
Pigment Brown 29 (CI 77500)
Hematite structure
Brownish to bluish black shade
MAIN CHARACTERISTICS MANGANESE CHROME IRON
Ease of dispersion
MnFe2O4
Pigment Black 26 (CI 77494)
Spinel structure
Very bluishdeep shade the strongest black CICP
Ease of dispersion
SPINEL
PBk26 FERRITE BLACK BROWN
PBr29
HEMATITE
BLACK
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS 10466 Reddish shade V-780 Strong reddish shade
V-760 Yellowish shade V-781 Strong reddish shade
V-778 Yellowish shade V-785 The most bluish shade
V-778-2 Yellow reddish shade V-10121-2 Dark brown
Excellent dimensional stability no warping no shrinkage
Opaque to visible light UVNIR absorbent
The black CICP with the highest heat fastness
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness gt500oC 5 min Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS F-6331-2 High tinting strength very bluish shade
bull bull
bull bull
bull
bull bull
bull
bull bull
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with moderate NIR reflectance (ldquocoolrdquo pigment)
Used when neither Carbon Black nor Black Iron Oxide can be used for technical reasons
PBk11 IRON OXIDE
BLACK
BLACK MAIN CHARACTERISTICS
MnFe2O
PBk33
4
Pigment Black 33 (CI 77537)
Hematite structure
Brownish to bluish black shade
Ease of dispersion
MANGANESE FERRITE BLACK OXIDE
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
Heat fastness 180oC 5 min Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS 24-3303 Reddish shade Nubifer NB-803K Bluish shade
MAIN CHARACTERISTICS
Fe3O4
Pigment Black 11 (CI 77499)
Magnetite structure
Bluish black shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light NIR absorbent
Suitable for low processing temperature Polyolefins PVC (just unplasticized compounds the more stabilized the PVC is the more suitable conventional Black Iron Oxides become) and Rubber
RECOMMENDED PRODUCTS Nubifer NB-5970 Micronized high tinting strength very bluish shade
COOL PIGMENTS MAIN CHARACTERISTICS
It is well known that under the sun dark surfaces become hot and white surfaces remain cooler When comparing a white plastic part containing TiO2 (Near Infrared -NIR- reflecting pigment) with a black plastic part containing Carbon Black (Near Infrared -NIR- absorbent pigment) the surface temperature difference can reach more than 30degC on a hot sunny day This common effect is not only related to color but also to NIR absorption of the pigments used in a particular application By using the appropriate pigments even dark surfaces can stay cool under the sun This type of pigments also referred to as Cool Pigments do not absorb the NIR portion of wavelengths coming from sunlight There are 2 types of Cool Pigments NIR reflecting pigments and NIR transparent pigments The final behavior of the latter will be influenced by the entire system therefore when using NIR transparent pigments it is recommended to use them in combination with NIR reflecting pigments or substrates Ferro Pigments has a full range of Cool Pigments and many years of experience developing projects in this field so we are the ideal partner to support you in your cool projects
MAIN APPLICATIONS AND BENEFITS APPLICATIONS
PVC applications eg siding window profiles
Agricultural film
Plastic roof tiles
Sport fields and synthetic turfartificial grass
Automotive applications eg dashboards steering wheels upholstery
Fiber applications eg garment carpets
Single ply roofing systems
Black coloration of plastics to be recycled by NIR sensor sorting systems
BENEFITS
Increased service life due to less thermal stress on the plastic parts
Reduced air conditioning and energy consumption
Increased comfort Increased Health and Safety
Increased protection against thermal degradation of goods packaged with ldquocoolrdquo plastics
Recycle black parts to create economical value and reduce waste disposal
Ferro offers a full range of Cool Pigments in the whole color spectrum
MAIN PRODUCTS
bull bull bull bull bull
bull
bull bullbullbull
bull
regFERRO Where innovation delivers performancetrade
COOL PIGMENTS FERRO COOL PIGMENTS COLOR SPACE
COOL PIGMENTS (High NIR Reflectance) PY53 Nickel Antimony Titanium
Yellow Rutile
PBr24 Chrome Antimony Titanium Buff Rutile
PY184 Bismuth Vanadate
PG17 Chromium Green-Black Hematite
PY184 PG17 Chrome Oxide Green
PBr29 Chrome Iron Brown Hematite
PY164 Manganese Antimony Titanium Buff Rutile
PBr24PY53
COOL PIGMENTS PBk12 (Moderate NIR Reflectance PY119 PR101or NIR transparency)
PG50 PG17 Transparent to NIR PY164
PG50 PG26Ni Free PBk12 Iron Titanium Brown Spinel PBr29 PB28 Cobalt Aluminate Blue PBk33PB28 PG17
Spinel Turquoise PB36 PB36 Cobalt Chromite Blue-Green Turquoise
Spinel
PBk33 Manganese Ferrite Black Oxide
PG26 Cobalt Chromite Green PV15 PB36 Spinel
PG50 Cobalt Titanate Green PB28 Spinel
PR101 Iron Oxide Red PB29PY119 Zinc Ferrite Brown Spinel
PB29 Ultramarine Blue
PV15 Ultramarine Violet
bull
bull
bull
bull
MAIN CHARACTERISTICS
Sodium Aluminum Sulfosilicate Na [(AlSi) ]O (S )8-x 12 24 y 2
Pigment Blue 29 (CI 77007)
Unique reddish blue shade
Excellent ability to make whites ldquowhiterrdquo greys bluer and blacks ldquojetterdeeperrdquo
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Semitransparent to visible light transparent to NIR (ldquocoolrdquo pigment but its cool performance will be highly dependent on substrate and formulation)
BLUE PB29 ULTRAMARINE BLUE
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers PVC Silicones and Rubber
Heat fastness 350oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (4-5 on grey scale) Acid fastness Low except acid resistant series Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS
Nubix SERIES The high dispersibility narrow colorimetric tolerance low moisture and low free Sulfur content Ultramarine Blues
Nubiperf SERIES The very high dispersibility narrow colorimetric tolerance low moisture and low free Sulfur content Ultramarine Blues
Nubiperf SRD The Super Reddish Ultramarine Blue to 1) reach unique reddish blue shades 2) avoid the use of tiny problematic amounts of red violet organic pigments to shade blues 3) tint whites and reduce polymerrsquos yellowness with a unique neutral shade
Nubiflow
The very high dispersibility narrow colorimetric tolerance low moisture and low free Sulfur content Ultramarine Blue specially recommended for fibers and very thin films
Nubiperf FCP SERIES (Food and Cosmetics Packaging)
The very low free Sulfur content very high dispersibility narrow colorimetric tolerance and low moisture content Ultramarine Blues specially recommended for sensitive to odor and taste applications
Nubiperf AR (new generation Acid Resistant grade) Encapsulated grade that shows high acid resistance in use and good dispersibility specially recommended for PVC POM or any other polymer in contact with acids or that can release acids during service life
LD SERIES (Low Dust)
Combinations of Ultramarine Blues with a Polyethylene wax to enhance processing and free-flow performance mostly in Polyolefins
bull bull
bull bull
bull bull
bull bull
bull bull
BLUEPB28 COBALT ALUMINATE BLUE SPINEL
PB36 COBALT
CHROMITE BLUE-GREEN
SPINEL
MAIN CHARACTERISTICS
CoAl2O4
Pigment Blue 28 (CI 77346)
Spinel structure
Reddish blue shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
UV transparent opaque to visible light with moderate NIR reflectance (ldquocoolrdquo pigment)
MAIN CHARACTERISTICS
Co(AlCr)2O4
Pigment Blue 36 (CI 77343)
Spinel structure
Greenish blue shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
UV transparent opaque to visible light with moderate NIR reflectance (ldquocoolrdquo pigment)
BLUE
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS V-3285 Standard grade 10446 High tinting strength reddish shade
10336 High tinting strength reddish shade V-9250 High tinting strength reddish shade
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS V-9242 Standard grade F-5686 Turquoise Blue greenish shade
V-9248 High tinting strength
bull bull
bull
bull
bull bull
PV15 ULTRAMARINE VIOLET
Heat fastness 300oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (4-5 on grey scale) Acid fastness Low Alkali fastness High Solvent fastness Excellent
MAIN CHARACTERISTICS Sodium Aluminum Sulfosilicate Na8-x[(AlSi)12]O24(Sy)2
Pigment Violet 15 (CI 77007)
Unique violet shades
Excellent dimensional stability no warping no shrinkage
Semitransparent to visible light transparent to NIR (ldquocoolrdquo pigment but its cool performance will be highly dependent on substrate and formulation)
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers PVC Silicones and Rubber
MAIN CHARACTERISTICS Sr5(PO4)3Cu03O
Apatite structure
Unique violet shade
Suitable for replacing PV23 in applications that require high weather fastness
Excellent ability to make whites ldquowhiterrdquo
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Semitransparent to visible light NIR absorbent
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness High
Alkali fastness High Solvent fastness Excellent
VIOLET STRONTIUM PHOSPHATE
VIOLET
RECOMMENDED PRODUCTS Nubix SERIES Nubix V-5 Bluish shade
The high dispersibility narrow colorimetric tolerance low moisture and low free Sulfur
Nubix V-8 High tinting strength unique blue shade
Nubix V-40 High tinting strength unique reddish shade
content Ultramarine Violets Nubix V-60 Reddishpink shade
RECOMMENDED PRODUCTS 28-5333 Standard grade
(pending TSCA inventory)
bull
bull
bull bull
middotmiddotmiddot
middot- - -middotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddot-middot middot-
middotmiddotmiddotmiddotmiddotmiddot- middotmiddotmiddotmiddotmiddotmiddotmiddot- middotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddot-middotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddot-middotmiddotmiddotmiddot middot-middotmiddotmiddotmiddot
bull bull
PG17 CHROME OXIDE GREEN
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
MAIN CHARACTERISTICS
CoCr2O4
Pigment Green 26 (CI 77344)
Spinel structure
Dark bluish green shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with moderate NIR reflectance (ldquocoolrdquo pigment)
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
MAIN CHARACTERISTICS
Cr2O3
Pigment Green 17 (CI 77288)
PrismaticRhombohedral structure
Olive green shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with high NIR reflectance (ldquocoolrdquo pigment)
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness 500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
PG26 COBALT
CHROMITE GREEN SPINEL
GREEN
RECOMMENDED PRODUCTS SMM SERIES Nubicrom SERIES The micronized Chrome Oxide Greens The highly micronizedhigh dispersibility
Chrome Oxide Greens SMM-4 Bluish shade
SMM-6 Yellowish shade Nubicrom 02 Yellowish shade
SMM-7 Yellowish shade
RECOMMENDED PRODUCTS V-12600 Camouflage Green bluish shade V-12604 Camouflage Green yellowish shade
bull
bull
bull
bull
bull
PG50 COBALT TITANATE GREEN SPINEL
MAIN CHARACTERISTICS
Co2TiO4
Pigment Green 50 (CI 77377)
Spinel structure
Bright green shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque with moderate NIR reflectance (ldquocoolrdquo pigment)
Ni free products available
GREEN
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS V-11633 Standard grade 21-5901 Ni free (CMR classification free)
yellowish shade 21-4030 High tinting strength bluish shade 21-4345 Ni free (CMR classification free) 21-5801 Ni free (CMR classification free)
color like 21-4045 bluish shade
V-9229 Turquoise Blue greenish shade
bull
bull bull
bull bull
bull bull
bull bull
bull bull
YYYYEEEELLLLLLLLOOOOWWWW PY53 NICKEL ANTIMONY MAIN CHARACTERISTICS TITANIUM
(TiNiSb) O2YELLOW RUTILE Pigment Yellow 53 (CI 77788)
Rutile structure
Light yellow shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with high NIR reflectance (ldquocoolrdquo pigment)
BISMUTH VANADATE
PY184 MAIN CHARACTERISTICS
BiVO4
Pigment Yellow 184 (CI 771740)
Bright primrose yellow shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with high NIR reflectance (ldquocoolrdquo pigment)
Possible replacement of Chrome Yellows in combination with Organics
Possible replacement of Chrome Yellows in combination with Organics
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
Suitable for low processing temperature Polyolefins PVC and Rubber
Heat fastness 220oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent () IMPORTANT NOTE
For high heat fastness Bismuth Vanadates please check our available products in our legacy Cappelle pigments brochure
RECOMMENDED PRODUCTS 10401 Standard grade V-9412 Strong greenish shade
V-9415 Standard greenish shade V-9416 Unique reddish shade
RECOMMENDED PRODUCTS Nubivan Y-901 Standard grade very greenish
bull
bull
bull
bull
bull
bull
bull
bull
~
bull
bull
MAIN CHARACTERISTICS
PbCrO4
Pigment Yellow 34 (CI 77603)
Ease of dispersion
Opaque to visible light
PY34 CHROME YELLOW
YELLOW RECOMMENDED PRODUCTS AD-74 Conventional middle yellow Nubiterm AK-74 High heat fastness PbSO4 middle yellow AD-81 Conventional lemon yellow
Nubiterm AK-81 High heat fastness AL-90 Conventional primrose yellow Monoclinic to Rhombic structure depending on shade lemon yellow
Bright yellow shade (middle lemon and primrose) NB Ferro has not requested the REACH authorization for the use of Chrome Yellows in the European Union
Excellent dimensional stability no warping no shrinkage
Suitable for Polyolefins PS ABS Engineering Polymers (depending on processing temperature) PVC and Rubber
CONVENTIONAL (LD) Heat fastness 180oC 5 min SERIES Light fastness MiddleLemon = Fair Primrose = Low
Weather fastness MiddleLemon = Medium Primrose = Low
Acid fastness Fair Alkali fastness Low
Solvent fastness Excellent
RESISTANT (RS) SERIES Heat fastness 220-260oC 5 min
Light fastness MiddleLemon = High Primrose = Fair Weather fastness MiddleLemon = High Primrose = Fair Acid fastness High
Alkali fastness Low
Solvent fastness Excellent
Nubiterm K SERIES Heat fastness 300oC 5 min
Light fastness High
Weather fastness High Acid fastness High
Alkali fastness Low
Solvent fastness Excellent
bull
bull
bull bull
bull bull
bull bull
bull bull
bull
bull bull
BUFF PBr24 CHROME MAIN CHARACTERISTICS ANTIMONY
(TiCrSb) O2TITANIUM BUFF RUTILE Pigment Brown 24 (CI 77310)
Rutile structure
Clean buff shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with high NIR reflectance (ldquocoolrdquo pigment)
Possible replacement of Chrome Yellows in combination with Organics
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS 10406 Standard grade yellowish shade V-9118 Yellowish shade
10408 Standard grade reddish shade V-12112 High tinting strength reddish shade
10411 Strong greenish shade 10657 High tinting strength reddish blue
MAIN CHARACTERISTICS
FeOOH
Pigment Yellow 42 (CI 77492)
Goethite structure
Dull buff shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with low NIR reflectance
PY42 IRON OXIDE
YELLOW
Possible replacement of Chrome Yellows in combination with Organics
Good coloristics to combine with Organics and Inorganics to reach specific colors at very competitive cost eg natural greens bright reds chocolate browns light beiges
Conventional grades are suitable for low processing temperature Polyolefins PVC (just unplasticized compounds the more stabilized the PVC is the more suitable conventional Yellow Iron Oxides become) and Rubber Nubifer Y-7050 is suitable for medium processing temperature Polyolefins PS ABS PVC (plasticized and unplasticized compounds the more stabilized the PVC is the more suitable Nubifer Y-7050 becomes) and Rubber
Heat fastness 160oC 5 min except Nubifer Y-7050 (260oC 5 min)
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS Nubifer Y-5000 SERIES Nubifer Y-7000 SERIES The micronizedhigh dispersibilitynarrow The micronized higher heat fastness than colorimetric tolerance Yellow Iron Oxides conventional Yellow Iron Oxides
Nubifer Y-5010 Light shade Nubifer Y-7050 Encapsulated grade for medium processing Nubifer Y-5021 Reddish shade temperature resins (heat fastness = 260degC 5 min) and PVC (more suitable for unplasticized PVC compounds than conventional Yellow Iron Oxides)
bull
bull
bull
bull
bull
bull
bull
bull
PY119 ZINC FERRITE BROWN SPINEL
MAIN CHARACTERISTICS
ZnFe2O4
Pigment Yellow 119 (CI 77496)
Spinel structure
Reddish buff shade
Ease of dispersion
(ldquocoolrdquo pigment)
BUFFBUFFBUFF
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with moderate NIR reflectance
Possible replacement of Chrome Yellows in combination with Organics
Good coloristics to combine with Organics and Inorganics to reach specific colors at very competitive cost eg natural greens bright reds chocolate browns light beiges
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers PVC Silicones and Rubber
Heat fastness Nubifer Y-805K (300oC 5 min) Nubifer Y-905K (260oC 5 min)
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS Nubifer Y-805K 10520 Very high heat fastness spinel Very high heat fastness yellowish shade (300degC 5 min) dark reddish shade V-9117 Very high heat fastness spinel Nubifer Y-905K yellowish shade High heat fastness (260degC 5 min) light yellowish shade
bull
bull bull
bull bull
bull bull
bull bull
BBBUUUFFFFFF PY164 MANGANESE MAIN CHARACTERISTICS ANTIMONY
(TiMnSb) O2TITANIUM BUFF RUTILE Pigment Yellow 164 ( CI 77899)
Dark brown shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with high NIR reflectance (ldquocoolrdquo pigment)
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fast Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS 10550 Standard grade V-12100 Bluish shade
MAIN CHARACTERISTICS
Fe2TiO4
Pigment Black 12 (CI 77543)
Buff shade similar to PBr24 without containing Cr3+
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with moderate NIR reflectance (ldquocoolrdquo pigment)
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
PBk12 IRON
TITANIUM BROWN
SPINEL
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS 10358 Standard grade
bull
bull
bull bull
bull bull
- - -_middotmiddotmiddotmiddot - ---
~_ bullbullbullbull ------- - -~~
bull
bull
MAIN CHARACTERISTICS Fe2O3
Pigment Red 101 (CI 77491)
Hematite structure
Dull red shade
Ease of dispersion
MAIN CHARACTERISTICS PbCrO4PbSO4PbMoO4
Pigment Red 104 (CI 77605)
Tetragonal structure
Bright red shade (orange scarlet and red)
Ease of dispersion
PR104 MOLYBDATE
ORANGE
PR101 IRON OXIDE RED
RED
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with moderate NIR reflectance (ldquocoolrdquo pigment)
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC (plasticized and unplasticized compounds the more stabilized the PVC is the more suitable Red Iron Oxides become) Silicones and Rubber
Heat fastness 500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS Nubifer R-5500 SERIES
The micronizedhigh dispersibilitynarrow colorimetric tolerance Red Iron Oxides
Nubifer R-5501 Nubifer R-5510 Nubifer R-5520 Nubifer R-5530
The most yellowishlightest shade
Yellowish shade
Yellowish-medium shade
Yellowish-medium shade
Nubifer R-5540 Bluish-medium shade
Nubifer R-5560 Bluish-medium shade
Nubifer R-5580C The most bluishdarkest shade
Excellent dimensional stability no warping no shrinkage
Opaque to visible light
Suitable for Polyolefins PS ABS Engineering Polymers (depending on processing temperature) PVC and Rubber
Heat fastness 180o - 200o C 5 min SERIES Light fastness Fair
Weather fastness Fair Acid fastness Fair Alkali fastness Low Solvent fastness Excellent
CONVENTIONAL (L)
RESISTANT (RS) Heat fastness 240o - 260o C 5 min SERIES Light fastness High
Weather fastness High Acid fastness High Alkali fastness Low Solvent fastness Excellent
Nubiterm K SERIES Heat fastness 300o C 5 min Light fastness High Weather fastness High Acid fastness High Alkali fastness Low Solvent fastness Excellent
RECOMMENDED PRODUCTS NRC-36 Resistant scarlet shade Nubiterm NK-38 High heat fastness orange shade
NB Ferro has not requested the REACH authorization for the use of Molybdate Oranges in the European Union
bull bull
bull bull
bull bull
bull bull
bull bull
MAIN CHARACTERISTICS
CuCr2O4
Pigment Black 28 (CI 77428)
Spinel Structure
Bluish deep shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light NIR absorbent
MAIN CHARACTERISTICS
Cr2O3
Pigment Green 17 ( CI 77288)
Hematite structure
Brownish to bluish black shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with high NIR reflectance (ldquocoolrdquo pigment)
PG17 CHROMIUM
GREEN-BLACK HEMATITE
BLACK PBk28 COPPER CHROMITE BLACK SPINEL
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS V-7709 Standard grade V-7710 Standard grade
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineer-ing Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness Light fastness
Weather fastness Acid fastness Alkali fastness Solvent fastness
gt500oC 5 min Excellent (8 on blue wool scale) Excellent (5 on grey scale) Excellent Excellent Excellent
RECOMMENDED PRODUCTS V-772 Reddish shade V-775 The most bluish shade
V-774 High tinting strength bluish shade
bull bull
bull bull
bull bull
bull bull
bull bull
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with high NIR reflectance (ldquocoolrdquo pigment)
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
MAIN CHARACTERISTICS
(CrFe)2O3
Pigment Brown 29 (CI 77500)
Hematite structure
Brownish to bluish black shade
MAIN CHARACTERISTICS MANGANESE CHROME IRON
Ease of dispersion
MnFe2O4
Pigment Black 26 (CI 77494)
Spinel structure
Very bluishdeep shade the strongest black CICP
Ease of dispersion
SPINEL
PBk26 FERRITE BLACK BROWN
PBr29
HEMATITE
BLACK
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS 10466 Reddish shade V-780 Strong reddish shade
V-760 Yellowish shade V-781 Strong reddish shade
V-778 Yellowish shade V-785 The most bluish shade
V-778-2 Yellow reddish shade V-10121-2 Dark brown
Excellent dimensional stability no warping no shrinkage
Opaque to visible light UVNIR absorbent
The black CICP with the highest heat fastness
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness gt500oC 5 min Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS F-6331-2 High tinting strength very bluish shade
bull bull
bull bull
bull
bull bull
bull
bull bull
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with moderate NIR reflectance (ldquocoolrdquo pigment)
Used when neither Carbon Black nor Black Iron Oxide can be used for technical reasons
PBk11 IRON OXIDE
BLACK
BLACK MAIN CHARACTERISTICS
MnFe2O
PBk33
4
Pigment Black 33 (CI 77537)
Hematite structure
Brownish to bluish black shade
Ease of dispersion
MANGANESE FERRITE BLACK OXIDE
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
Heat fastness 180oC 5 min Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS 24-3303 Reddish shade Nubifer NB-803K Bluish shade
MAIN CHARACTERISTICS
Fe3O4
Pigment Black 11 (CI 77499)
Magnetite structure
Bluish black shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light NIR absorbent
Suitable for low processing temperature Polyolefins PVC (just unplasticized compounds the more stabilized the PVC is the more suitable conventional Black Iron Oxides become) and Rubber
RECOMMENDED PRODUCTS Nubifer NB-5970 Micronized high tinting strength very bluish shade
COOL PIGMENTS MAIN CHARACTERISTICS
It is well known that under the sun dark surfaces become hot and white surfaces remain cooler When comparing a white plastic part containing TiO2 (Near Infrared -NIR- reflecting pigment) with a black plastic part containing Carbon Black (Near Infrared -NIR- absorbent pigment) the surface temperature difference can reach more than 30degC on a hot sunny day This common effect is not only related to color but also to NIR absorption of the pigments used in a particular application By using the appropriate pigments even dark surfaces can stay cool under the sun This type of pigments also referred to as Cool Pigments do not absorb the NIR portion of wavelengths coming from sunlight There are 2 types of Cool Pigments NIR reflecting pigments and NIR transparent pigments The final behavior of the latter will be influenced by the entire system therefore when using NIR transparent pigments it is recommended to use them in combination with NIR reflecting pigments or substrates Ferro Pigments has a full range of Cool Pigments and many years of experience developing projects in this field so we are the ideal partner to support you in your cool projects
MAIN APPLICATIONS AND BENEFITS APPLICATIONS
PVC applications eg siding window profiles
Agricultural film
Plastic roof tiles
Sport fields and synthetic turfartificial grass
Automotive applications eg dashboards steering wheels upholstery
Fiber applications eg garment carpets
Single ply roofing systems
Black coloration of plastics to be recycled by NIR sensor sorting systems
BENEFITS
Increased service life due to less thermal stress on the plastic parts
Reduced air conditioning and energy consumption
Increased comfort Increased Health and Safety
Increased protection against thermal degradation of goods packaged with ldquocoolrdquo plastics
Recycle black parts to create economical value and reduce waste disposal
Ferro offers a full range of Cool Pigments in the whole color spectrum
MAIN PRODUCTS
bull bull bull bull bull
bull
bull bullbullbull
bull
regFERRO Where innovation delivers performancetrade
COOL PIGMENTS FERRO COOL PIGMENTS COLOR SPACE
COOL PIGMENTS (High NIR Reflectance) PY53 Nickel Antimony Titanium
Yellow Rutile
PBr24 Chrome Antimony Titanium Buff Rutile
PY184 Bismuth Vanadate
PG17 Chromium Green-Black Hematite
PY184 PG17 Chrome Oxide Green
PBr29 Chrome Iron Brown Hematite
PY164 Manganese Antimony Titanium Buff Rutile
PBr24PY53
COOL PIGMENTS PBk12 (Moderate NIR Reflectance PY119 PR101or NIR transparency)
PG50 PG17 Transparent to NIR PY164
PG50 PG26Ni Free PBk12 Iron Titanium Brown Spinel PBr29 PB28 Cobalt Aluminate Blue PBk33PB28 PG17
Spinel Turquoise PB36 PB36 Cobalt Chromite Blue-Green Turquoise
Spinel
PBk33 Manganese Ferrite Black Oxide
PG26 Cobalt Chromite Green PV15 PB36 Spinel
PG50 Cobalt Titanate Green PB28 Spinel
PR101 Iron Oxide Red PB29PY119 Zinc Ferrite Brown Spinel
PB29 Ultramarine Blue
PV15 Ultramarine Violet
bull bull
bull bull
bull bull
bull bull
bull bull
BLUEPB28 COBALT ALUMINATE BLUE SPINEL
PB36 COBALT
CHROMITE BLUE-GREEN
SPINEL
MAIN CHARACTERISTICS
CoAl2O4
Pigment Blue 28 (CI 77346)
Spinel structure
Reddish blue shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
UV transparent opaque to visible light with moderate NIR reflectance (ldquocoolrdquo pigment)
MAIN CHARACTERISTICS
Co(AlCr)2O4
Pigment Blue 36 (CI 77343)
Spinel structure
Greenish blue shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
UV transparent opaque to visible light with moderate NIR reflectance (ldquocoolrdquo pigment)
BLUE
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS V-3285 Standard grade 10446 High tinting strength reddish shade
10336 High tinting strength reddish shade V-9250 High tinting strength reddish shade
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS V-9242 Standard grade F-5686 Turquoise Blue greenish shade
V-9248 High tinting strength
bull bull
bull
bull
bull bull
PV15 ULTRAMARINE VIOLET
Heat fastness 300oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (4-5 on grey scale) Acid fastness Low Alkali fastness High Solvent fastness Excellent
MAIN CHARACTERISTICS Sodium Aluminum Sulfosilicate Na8-x[(AlSi)12]O24(Sy)2
Pigment Violet 15 (CI 77007)
Unique violet shades
Excellent dimensional stability no warping no shrinkage
Semitransparent to visible light transparent to NIR (ldquocoolrdquo pigment but its cool performance will be highly dependent on substrate and formulation)
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers PVC Silicones and Rubber
MAIN CHARACTERISTICS Sr5(PO4)3Cu03O
Apatite structure
Unique violet shade
Suitable for replacing PV23 in applications that require high weather fastness
Excellent ability to make whites ldquowhiterrdquo
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Semitransparent to visible light NIR absorbent
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness High
Alkali fastness High Solvent fastness Excellent
VIOLET STRONTIUM PHOSPHATE
VIOLET
RECOMMENDED PRODUCTS Nubix SERIES Nubix V-5 Bluish shade
The high dispersibility narrow colorimetric tolerance low moisture and low free Sulfur
Nubix V-8 High tinting strength unique blue shade
Nubix V-40 High tinting strength unique reddish shade
content Ultramarine Violets Nubix V-60 Reddishpink shade
RECOMMENDED PRODUCTS 28-5333 Standard grade
(pending TSCA inventory)
bull
bull
bull bull
middotmiddotmiddot
middot- - -middotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddot-middot middot-
middotmiddotmiddotmiddotmiddotmiddot- middotmiddotmiddotmiddotmiddotmiddotmiddot- middotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddot-middotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddot-middotmiddotmiddotmiddot middot-middotmiddotmiddotmiddot
bull bull
PG17 CHROME OXIDE GREEN
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
MAIN CHARACTERISTICS
CoCr2O4
Pigment Green 26 (CI 77344)
Spinel structure
Dark bluish green shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with moderate NIR reflectance (ldquocoolrdquo pigment)
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
MAIN CHARACTERISTICS
Cr2O3
Pigment Green 17 (CI 77288)
PrismaticRhombohedral structure
Olive green shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with high NIR reflectance (ldquocoolrdquo pigment)
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness 500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
PG26 COBALT
CHROMITE GREEN SPINEL
GREEN
RECOMMENDED PRODUCTS SMM SERIES Nubicrom SERIES The micronized Chrome Oxide Greens The highly micronizedhigh dispersibility
Chrome Oxide Greens SMM-4 Bluish shade
SMM-6 Yellowish shade Nubicrom 02 Yellowish shade
SMM-7 Yellowish shade
RECOMMENDED PRODUCTS V-12600 Camouflage Green bluish shade V-12604 Camouflage Green yellowish shade
bull
bull
bull
bull
bull
PG50 COBALT TITANATE GREEN SPINEL
MAIN CHARACTERISTICS
Co2TiO4
Pigment Green 50 (CI 77377)
Spinel structure
Bright green shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque with moderate NIR reflectance (ldquocoolrdquo pigment)
Ni free products available
GREEN
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS V-11633 Standard grade 21-5901 Ni free (CMR classification free)
yellowish shade 21-4030 High tinting strength bluish shade 21-4345 Ni free (CMR classification free) 21-5801 Ni free (CMR classification free)
color like 21-4045 bluish shade
V-9229 Turquoise Blue greenish shade
bull
bull bull
bull bull
bull bull
bull bull
bull bull
YYYYEEEELLLLLLLLOOOOWWWW PY53 NICKEL ANTIMONY MAIN CHARACTERISTICS TITANIUM
(TiNiSb) O2YELLOW RUTILE Pigment Yellow 53 (CI 77788)
Rutile structure
Light yellow shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with high NIR reflectance (ldquocoolrdquo pigment)
BISMUTH VANADATE
PY184 MAIN CHARACTERISTICS
BiVO4
Pigment Yellow 184 (CI 771740)
Bright primrose yellow shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with high NIR reflectance (ldquocoolrdquo pigment)
Possible replacement of Chrome Yellows in combination with Organics
Possible replacement of Chrome Yellows in combination with Organics
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
Suitable for low processing temperature Polyolefins PVC and Rubber
Heat fastness 220oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent () IMPORTANT NOTE
For high heat fastness Bismuth Vanadates please check our available products in our legacy Cappelle pigments brochure
RECOMMENDED PRODUCTS 10401 Standard grade V-9412 Strong greenish shade
V-9415 Standard greenish shade V-9416 Unique reddish shade
RECOMMENDED PRODUCTS Nubivan Y-901 Standard grade very greenish
bull
bull
bull
bull
bull
bull
bull
bull
~
bull
bull
MAIN CHARACTERISTICS
PbCrO4
Pigment Yellow 34 (CI 77603)
Ease of dispersion
Opaque to visible light
PY34 CHROME YELLOW
YELLOW RECOMMENDED PRODUCTS AD-74 Conventional middle yellow Nubiterm AK-74 High heat fastness PbSO4 middle yellow AD-81 Conventional lemon yellow
Nubiterm AK-81 High heat fastness AL-90 Conventional primrose yellow Monoclinic to Rhombic structure depending on shade lemon yellow
Bright yellow shade (middle lemon and primrose) NB Ferro has not requested the REACH authorization for the use of Chrome Yellows in the European Union
Excellent dimensional stability no warping no shrinkage
Suitable for Polyolefins PS ABS Engineering Polymers (depending on processing temperature) PVC and Rubber
CONVENTIONAL (LD) Heat fastness 180oC 5 min SERIES Light fastness MiddleLemon = Fair Primrose = Low
Weather fastness MiddleLemon = Medium Primrose = Low
Acid fastness Fair Alkali fastness Low
Solvent fastness Excellent
RESISTANT (RS) SERIES Heat fastness 220-260oC 5 min
Light fastness MiddleLemon = High Primrose = Fair Weather fastness MiddleLemon = High Primrose = Fair Acid fastness High
Alkali fastness Low
Solvent fastness Excellent
Nubiterm K SERIES Heat fastness 300oC 5 min
Light fastness High
Weather fastness High Acid fastness High
Alkali fastness Low
Solvent fastness Excellent
bull
bull
bull bull
bull bull
bull bull
bull bull
bull
bull bull
BUFF PBr24 CHROME MAIN CHARACTERISTICS ANTIMONY
(TiCrSb) O2TITANIUM BUFF RUTILE Pigment Brown 24 (CI 77310)
Rutile structure
Clean buff shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with high NIR reflectance (ldquocoolrdquo pigment)
Possible replacement of Chrome Yellows in combination with Organics
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS 10406 Standard grade yellowish shade V-9118 Yellowish shade
10408 Standard grade reddish shade V-12112 High tinting strength reddish shade
10411 Strong greenish shade 10657 High tinting strength reddish blue
MAIN CHARACTERISTICS
FeOOH
Pigment Yellow 42 (CI 77492)
Goethite structure
Dull buff shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with low NIR reflectance
PY42 IRON OXIDE
YELLOW
Possible replacement of Chrome Yellows in combination with Organics
Good coloristics to combine with Organics and Inorganics to reach specific colors at very competitive cost eg natural greens bright reds chocolate browns light beiges
Conventional grades are suitable for low processing temperature Polyolefins PVC (just unplasticized compounds the more stabilized the PVC is the more suitable conventional Yellow Iron Oxides become) and Rubber Nubifer Y-7050 is suitable for medium processing temperature Polyolefins PS ABS PVC (plasticized and unplasticized compounds the more stabilized the PVC is the more suitable Nubifer Y-7050 becomes) and Rubber
Heat fastness 160oC 5 min except Nubifer Y-7050 (260oC 5 min)
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS Nubifer Y-5000 SERIES Nubifer Y-7000 SERIES The micronizedhigh dispersibilitynarrow The micronized higher heat fastness than colorimetric tolerance Yellow Iron Oxides conventional Yellow Iron Oxides
Nubifer Y-5010 Light shade Nubifer Y-7050 Encapsulated grade for medium processing Nubifer Y-5021 Reddish shade temperature resins (heat fastness = 260degC 5 min) and PVC (more suitable for unplasticized PVC compounds than conventional Yellow Iron Oxides)
bull
bull
bull
bull
bull
bull
bull
bull
PY119 ZINC FERRITE BROWN SPINEL
MAIN CHARACTERISTICS
ZnFe2O4
Pigment Yellow 119 (CI 77496)
Spinel structure
Reddish buff shade
Ease of dispersion
(ldquocoolrdquo pigment)
BUFFBUFFBUFF
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with moderate NIR reflectance
Possible replacement of Chrome Yellows in combination with Organics
Good coloristics to combine with Organics and Inorganics to reach specific colors at very competitive cost eg natural greens bright reds chocolate browns light beiges
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers PVC Silicones and Rubber
Heat fastness Nubifer Y-805K (300oC 5 min) Nubifer Y-905K (260oC 5 min)
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS Nubifer Y-805K 10520 Very high heat fastness spinel Very high heat fastness yellowish shade (300degC 5 min) dark reddish shade V-9117 Very high heat fastness spinel Nubifer Y-905K yellowish shade High heat fastness (260degC 5 min) light yellowish shade
bull
bull bull
bull bull
bull bull
bull bull
BBBUUUFFFFFF PY164 MANGANESE MAIN CHARACTERISTICS ANTIMONY
(TiMnSb) O2TITANIUM BUFF RUTILE Pigment Yellow 164 ( CI 77899)
Dark brown shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with high NIR reflectance (ldquocoolrdquo pigment)
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fast Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS 10550 Standard grade V-12100 Bluish shade
MAIN CHARACTERISTICS
Fe2TiO4
Pigment Black 12 (CI 77543)
Buff shade similar to PBr24 without containing Cr3+
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with moderate NIR reflectance (ldquocoolrdquo pigment)
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
PBk12 IRON
TITANIUM BROWN
SPINEL
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS 10358 Standard grade
bull
bull
bull bull
bull bull
- - -_middotmiddotmiddotmiddot - ---
~_ bullbullbullbull ------- - -~~
bull
bull
MAIN CHARACTERISTICS Fe2O3
Pigment Red 101 (CI 77491)
Hematite structure
Dull red shade
Ease of dispersion
MAIN CHARACTERISTICS PbCrO4PbSO4PbMoO4
Pigment Red 104 (CI 77605)
Tetragonal structure
Bright red shade (orange scarlet and red)
Ease of dispersion
PR104 MOLYBDATE
ORANGE
PR101 IRON OXIDE RED
RED
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with moderate NIR reflectance (ldquocoolrdquo pigment)
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC (plasticized and unplasticized compounds the more stabilized the PVC is the more suitable Red Iron Oxides become) Silicones and Rubber
Heat fastness 500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS Nubifer R-5500 SERIES
The micronizedhigh dispersibilitynarrow colorimetric tolerance Red Iron Oxides
Nubifer R-5501 Nubifer R-5510 Nubifer R-5520 Nubifer R-5530
The most yellowishlightest shade
Yellowish shade
Yellowish-medium shade
Yellowish-medium shade
Nubifer R-5540 Bluish-medium shade
Nubifer R-5560 Bluish-medium shade
Nubifer R-5580C The most bluishdarkest shade
Excellent dimensional stability no warping no shrinkage
Opaque to visible light
Suitable for Polyolefins PS ABS Engineering Polymers (depending on processing temperature) PVC and Rubber
Heat fastness 180o - 200o C 5 min SERIES Light fastness Fair
Weather fastness Fair Acid fastness Fair Alkali fastness Low Solvent fastness Excellent
CONVENTIONAL (L)
RESISTANT (RS) Heat fastness 240o - 260o C 5 min SERIES Light fastness High
Weather fastness High Acid fastness High Alkali fastness Low Solvent fastness Excellent
Nubiterm K SERIES Heat fastness 300o C 5 min Light fastness High Weather fastness High Acid fastness High Alkali fastness Low Solvent fastness Excellent
RECOMMENDED PRODUCTS NRC-36 Resistant scarlet shade Nubiterm NK-38 High heat fastness orange shade
NB Ferro has not requested the REACH authorization for the use of Molybdate Oranges in the European Union
bull bull
bull bull
bull bull
bull bull
bull bull
MAIN CHARACTERISTICS
CuCr2O4
Pigment Black 28 (CI 77428)
Spinel Structure
Bluish deep shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light NIR absorbent
MAIN CHARACTERISTICS
Cr2O3
Pigment Green 17 ( CI 77288)
Hematite structure
Brownish to bluish black shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with high NIR reflectance (ldquocoolrdquo pigment)
PG17 CHROMIUM
GREEN-BLACK HEMATITE
BLACK PBk28 COPPER CHROMITE BLACK SPINEL
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS V-7709 Standard grade V-7710 Standard grade
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineer-ing Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness Light fastness
Weather fastness Acid fastness Alkali fastness Solvent fastness
gt500oC 5 min Excellent (8 on blue wool scale) Excellent (5 on grey scale) Excellent Excellent Excellent
RECOMMENDED PRODUCTS V-772 Reddish shade V-775 The most bluish shade
V-774 High tinting strength bluish shade
bull bull
bull bull
bull bull
bull bull
bull bull
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with high NIR reflectance (ldquocoolrdquo pigment)
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
MAIN CHARACTERISTICS
(CrFe)2O3
Pigment Brown 29 (CI 77500)
Hematite structure
Brownish to bluish black shade
MAIN CHARACTERISTICS MANGANESE CHROME IRON
Ease of dispersion
MnFe2O4
Pigment Black 26 (CI 77494)
Spinel structure
Very bluishdeep shade the strongest black CICP
Ease of dispersion
SPINEL
PBk26 FERRITE BLACK BROWN
PBr29
HEMATITE
BLACK
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS 10466 Reddish shade V-780 Strong reddish shade
V-760 Yellowish shade V-781 Strong reddish shade
V-778 Yellowish shade V-785 The most bluish shade
V-778-2 Yellow reddish shade V-10121-2 Dark brown
Excellent dimensional stability no warping no shrinkage
Opaque to visible light UVNIR absorbent
The black CICP with the highest heat fastness
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness gt500oC 5 min Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS F-6331-2 High tinting strength very bluish shade
bull bull
bull bull
bull
bull bull
bull
bull bull
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with moderate NIR reflectance (ldquocoolrdquo pigment)
Used when neither Carbon Black nor Black Iron Oxide can be used for technical reasons
PBk11 IRON OXIDE
BLACK
BLACK MAIN CHARACTERISTICS
MnFe2O
PBk33
4
Pigment Black 33 (CI 77537)
Hematite structure
Brownish to bluish black shade
Ease of dispersion
MANGANESE FERRITE BLACK OXIDE
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
Heat fastness 180oC 5 min Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS 24-3303 Reddish shade Nubifer NB-803K Bluish shade
MAIN CHARACTERISTICS
Fe3O4
Pigment Black 11 (CI 77499)
Magnetite structure
Bluish black shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light NIR absorbent
Suitable for low processing temperature Polyolefins PVC (just unplasticized compounds the more stabilized the PVC is the more suitable conventional Black Iron Oxides become) and Rubber
RECOMMENDED PRODUCTS Nubifer NB-5970 Micronized high tinting strength very bluish shade
COOL PIGMENTS MAIN CHARACTERISTICS
It is well known that under the sun dark surfaces become hot and white surfaces remain cooler When comparing a white plastic part containing TiO2 (Near Infrared -NIR- reflecting pigment) with a black plastic part containing Carbon Black (Near Infrared -NIR- absorbent pigment) the surface temperature difference can reach more than 30degC on a hot sunny day This common effect is not only related to color but also to NIR absorption of the pigments used in a particular application By using the appropriate pigments even dark surfaces can stay cool under the sun This type of pigments also referred to as Cool Pigments do not absorb the NIR portion of wavelengths coming from sunlight There are 2 types of Cool Pigments NIR reflecting pigments and NIR transparent pigments The final behavior of the latter will be influenced by the entire system therefore when using NIR transparent pigments it is recommended to use them in combination with NIR reflecting pigments or substrates Ferro Pigments has a full range of Cool Pigments and many years of experience developing projects in this field so we are the ideal partner to support you in your cool projects
MAIN APPLICATIONS AND BENEFITS APPLICATIONS
PVC applications eg siding window profiles
Agricultural film
Plastic roof tiles
Sport fields and synthetic turfartificial grass
Automotive applications eg dashboards steering wheels upholstery
Fiber applications eg garment carpets
Single ply roofing systems
Black coloration of plastics to be recycled by NIR sensor sorting systems
BENEFITS
Increased service life due to less thermal stress on the plastic parts
Reduced air conditioning and energy consumption
Increased comfort Increased Health and Safety
Increased protection against thermal degradation of goods packaged with ldquocoolrdquo plastics
Recycle black parts to create economical value and reduce waste disposal
Ferro offers a full range of Cool Pigments in the whole color spectrum
MAIN PRODUCTS
bull bull bull bull bull
bull
bull bullbullbull
bull
regFERRO Where innovation delivers performancetrade
COOL PIGMENTS FERRO COOL PIGMENTS COLOR SPACE
COOL PIGMENTS (High NIR Reflectance) PY53 Nickel Antimony Titanium
Yellow Rutile
PBr24 Chrome Antimony Titanium Buff Rutile
PY184 Bismuth Vanadate
PG17 Chromium Green-Black Hematite
PY184 PG17 Chrome Oxide Green
PBr29 Chrome Iron Brown Hematite
PY164 Manganese Antimony Titanium Buff Rutile
PBr24PY53
COOL PIGMENTS PBk12 (Moderate NIR Reflectance PY119 PR101or NIR transparency)
PG50 PG17 Transparent to NIR PY164
PG50 PG26Ni Free PBk12 Iron Titanium Brown Spinel PBr29 PB28 Cobalt Aluminate Blue PBk33PB28 PG17
Spinel Turquoise PB36 PB36 Cobalt Chromite Blue-Green Turquoise
Spinel
PBk33 Manganese Ferrite Black Oxide
PG26 Cobalt Chromite Green PV15 PB36 Spinel
PG50 Cobalt Titanate Green PB28 Spinel
PR101 Iron Oxide Red PB29PY119 Zinc Ferrite Brown Spinel
PB29 Ultramarine Blue
PV15 Ultramarine Violet
bull bull
bull
bull
bull bull
PV15 ULTRAMARINE VIOLET
Heat fastness 300oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (4-5 on grey scale) Acid fastness Low Alkali fastness High Solvent fastness Excellent
MAIN CHARACTERISTICS Sodium Aluminum Sulfosilicate Na8-x[(AlSi)12]O24(Sy)2
Pigment Violet 15 (CI 77007)
Unique violet shades
Excellent dimensional stability no warping no shrinkage
Semitransparent to visible light transparent to NIR (ldquocoolrdquo pigment but its cool performance will be highly dependent on substrate and formulation)
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers PVC Silicones and Rubber
MAIN CHARACTERISTICS Sr5(PO4)3Cu03O
Apatite structure
Unique violet shade
Suitable for replacing PV23 in applications that require high weather fastness
Excellent ability to make whites ldquowhiterrdquo
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Semitransparent to visible light NIR absorbent
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness High
Alkali fastness High Solvent fastness Excellent
VIOLET STRONTIUM PHOSPHATE
VIOLET
RECOMMENDED PRODUCTS Nubix SERIES Nubix V-5 Bluish shade
The high dispersibility narrow colorimetric tolerance low moisture and low free Sulfur
Nubix V-8 High tinting strength unique blue shade
Nubix V-40 High tinting strength unique reddish shade
content Ultramarine Violets Nubix V-60 Reddishpink shade
RECOMMENDED PRODUCTS 28-5333 Standard grade
(pending TSCA inventory)
bull
bull
bull bull
middotmiddotmiddot
middot- - -middotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddot-middot middot-
middotmiddotmiddotmiddotmiddotmiddot- middotmiddotmiddotmiddotmiddotmiddotmiddot- middotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddot-middotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddot-middotmiddotmiddotmiddot middot-middotmiddotmiddotmiddot
bull bull
PG17 CHROME OXIDE GREEN
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
MAIN CHARACTERISTICS
CoCr2O4
Pigment Green 26 (CI 77344)
Spinel structure
Dark bluish green shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with moderate NIR reflectance (ldquocoolrdquo pigment)
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
MAIN CHARACTERISTICS
Cr2O3
Pigment Green 17 (CI 77288)
PrismaticRhombohedral structure
Olive green shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with high NIR reflectance (ldquocoolrdquo pigment)
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness 500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
PG26 COBALT
CHROMITE GREEN SPINEL
GREEN
RECOMMENDED PRODUCTS SMM SERIES Nubicrom SERIES The micronized Chrome Oxide Greens The highly micronizedhigh dispersibility
Chrome Oxide Greens SMM-4 Bluish shade
SMM-6 Yellowish shade Nubicrom 02 Yellowish shade
SMM-7 Yellowish shade
RECOMMENDED PRODUCTS V-12600 Camouflage Green bluish shade V-12604 Camouflage Green yellowish shade
bull
bull
bull
bull
bull
PG50 COBALT TITANATE GREEN SPINEL
MAIN CHARACTERISTICS
Co2TiO4
Pigment Green 50 (CI 77377)
Spinel structure
Bright green shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque with moderate NIR reflectance (ldquocoolrdquo pigment)
Ni free products available
GREEN
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS V-11633 Standard grade 21-5901 Ni free (CMR classification free)
yellowish shade 21-4030 High tinting strength bluish shade 21-4345 Ni free (CMR classification free) 21-5801 Ni free (CMR classification free)
color like 21-4045 bluish shade
V-9229 Turquoise Blue greenish shade
bull
bull bull
bull bull
bull bull
bull bull
bull bull
YYYYEEEELLLLLLLLOOOOWWWW PY53 NICKEL ANTIMONY MAIN CHARACTERISTICS TITANIUM
(TiNiSb) O2YELLOW RUTILE Pigment Yellow 53 (CI 77788)
Rutile structure
Light yellow shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with high NIR reflectance (ldquocoolrdquo pigment)
BISMUTH VANADATE
PY184 MAIN CHARACTERISTICS
BiVO4
Pigment Yellow 184 (CI 771740)
Bright primrose yellow shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with high NIR reflectance (ldquocoolrdquo pigment)
Possible replacement of Chrome Yellows in combination with Organics
Possible replacement of Chrome Yellows in combination with Organics
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
Suitable for low processing temperature Polyolefins PVC and Rubber
Heat fastness 220oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent () IMPORTANT NOTE
For high heat fastness Bismuth Vanadates please check our available products in our legacy Cappelle pigments brochure
RECOMMENDED PRODUCTS 10401 Standard grade V-9412 Strong greenish shade
V-9415 Standard greenish shade V-9416 Unique reddish shade
RECOMMENDED PRODUCTS Nubivan Y-901 Standard grade very greenish
bull
bull
bull
bull
bull
bull
bull
bull
~
bull
bull
MAIN CHARACTERISTICS
PbCrO4
Pigment Yellow 34 (CI 77603)
Ease of dispersion
Opaque to visible light
PY34 CHROME YELLOW
YELLOW RECOMMENDED PRODUCTS AD-74 Conventional middle yellow Nubiterm AK-74 High heat fastness PbSO4 middle yellow AD-81 Conventional lemon yellow
Nubiterm AK-81 High heat fastness AL-90 Conventional primrose yellow Monoclinic to Rhombic structure depending on shade lemon yellow
Bright yellow shade (middle lemon and primrose) NB Ferro has not requested the REACH authorization for the use of Chrome Yellows in the European Union
Excellent dimensional stability no warping no shrinkage
Suitable for Polyolefins PS ABS Engineering Polymers (depending on processing temperature) PVC and Rubber
CONVENTIONAL (LD) Heat fastness 180oC 5 min SERIES Light fastness MiddleLemon = Fair Primrose = Low
Weather fastness MiddleLemon = Medium Primrose = Low
Acid fastness Fair Alkali fastness Low
Solvent fastness Excellent
RESISTANT (RS) SERIES Heat fastness 220-260oC 5 min
Light fastness MiddleLemon = High Primrose = Fair Weather fastness MiddleLemon = High Primrose = Fair Acid fastness High
Alkali fastness Low
Solvent fastness Excellent
Nubiterm K SERIES Heat fastness 300oC 5 min
Light fastness High
Weather fastness High Acid fastness High
Alkali fastness Low
Solvent fastness Excellent
bull
bull
bull bull
bull bull
bull bull
bull bull
bull
bull bull
BUFF PBr24 CHROME MAIN CHARACTERISTICS ANTIMONY
(TiCrSb) O2TITANIUM BUFF RUTILE Pigment Brown 24 (CI 77310)
Rutile structure
Clean buff shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with high NIR reflectance (ldquocoolrdquo pigment)
Possible replacement of Chrome Yellows in combination with Organics
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS 10406 Standard grade yellowish shade V-9118 Yellowish shade
10408 Standard grade reddish shade V-12112 High tinting strength reddish shade
10411 Strong greenish shade 10657 High tinting strength reddish blue
MAIN CHARACTERISTICS
FeOOH
Pigment Yellow 42 (CI 77492)
Goethite structure
Dull buff shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with low NIR reflectance
PY42 IRON OXIDE
YELLOW
Possible replacement of Chrome Yellows in combination with Organics
Good coloristics to combine with Organics and Inorganics to reach specific colors at very competitive cost eg natural greens bright reds chocolate browns light beiges
Conventional grades are suitable for low processing temperature Polyolefins PVC (just unplasticized compounds the more stabilized the PVC is the more suitable conventional Yellow Iron Oxides become) and Rubber Nubifer Y-7050 is suitable for medium processing temperature Polyolefins PS ABS PVC (plasticized and unplasticized compounds the more stabilized the PVC is the more suitable Nubifer Y-7050 becomes) and Rubber
Heat fastness 160oC 5 min except Nubifer Y-7050 (260oC 5 min)
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS Nubifer Y-5000 SERIES Nubifer Y-7000 SERIES The micronizedhigh dispersibilitynarrow The micronized higher heat fastness than colorimetric tolerance Yellow Iron Oxides conventional Yellow Iron Oxides
Nubifer Y-5010 Light shade Nubifer Y-7050 Encapsulated grade for medium processing Nubifer Y-5021 Reddish shade temperature resins (heat fastness = 260degC 5 min) and PVC (more suitable for unplasticized PVC compounds than conventional Yellow Iron Oxides)
bull
bull
bull
bull
bull
bull
bull
bull
PY119 ZINC FERRITE BROWN SPINEL
MAIN CHARACTERISTICS
ZnFe2O4
Pigment Yellow 119 (CI 77496)
Spinel structure
Reddish buff shade
Ease of dispersion
(ldquocoolrdquo pigment)
BUFFBUFFBUFF
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with moderate NIR reflectance
Possible replacement of Chrome Yellows in combination with Organics
Good coloristics to combine with Organics and Inorganics to reach specific colors at very competitive cost eg natural greens bright reds chocolate browns light beiges
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers PVC Silicones and Rubber
Heat fastness Nubifer Y-805K (300oC 5 min) Nubifer Y-905K (260oC 5 min)
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS Nubifer Y-805K 10520 Very high heat fastness spinel Very high heat fastness yellowish shade (300degC 5 min) dark reddish shade V-9117 Very high heat fastness spinel Nubifer Y-905K yellowish shade High heat fastness (260degC 5 min) light yellowish shade
bull
bull bull
bull bull
bull bull
bull bull
BBBUUUFFFFFF PY164 MANGANESE MAIN CHARACTERISTICS ANTIMONY
(TiMnSb) O2TITANIUM BUFF RUTILE Pigment Yellow 164 ( CI 77899)
Dark brown shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with high NIR reflectance (ldquocoolrdquo pigment)
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fast Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS 10550 Standard grade V-12100 Bluish shade
MAIN CHARACTERISTICS
Fe2TiO4
Pigment Black 12 (CI 77543)
Buff shade similar to PBr24 without containing Cr3+
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with moderate NIR reflectance (ldquocoolrdquo pigment)
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
PBk12 IRON
TITANIUM BROWN
SPINEL
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS 10358 Standard grade
bull
bull
bull bull
bull bull
- - -_middotmiddotmiddotmiddot - ---
~_ bullbullbullbull ------- - -~~
bull
bull
MAIN CHARACTERISTICS Fe2O3
Pigment Red 101 (CI 77491)
Hematite structure
Dull red shade
Ease of dispersion
MAIN CHARACTERISTICS PbCrO4PbSO4PbMoO4
Pigment Red 104 (CI 77605)
Tetragonal structure
Bright red shade (orange scarlet and red)
Ease of dispersion
PR104 MOLYBDATE
ORANGE
PR101 IRON OXIDE RED
RED
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with moderate NIR reflectance (ldquocoolrdquo pigment)
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC (plasticized and unplasticized compounds the more stabilized the PVC is the more suitable Red Iron Oxides become) Silicones and Rubber
Heat fastness 500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS Nubifer R-5500 SERIES
The micronizedhigh dispersibilitynarrow colorimetric tolerance Red Iron Oxides
Nubifer R-5501 Nubifer R-5510 Nubifer R-5520 Nubifer R-5530
The most yellowishlightest shade
Yellowish shade
Yellowish-medium shade
Yellowish-medium shade
Nubifer R-5540 Bluish-medium shade
Nubifer R-5560 Bluish-medium shade
Nubifer R-5580C The most bluishdarkest shade
Excellent dimensional stability no warping no shrinkage
Opaque to visible light
Suitable for Polyolefins PS ABS Engineering Polymers (depending on processing temperature) PVC and Rubber
Heat fastness 180o - 200o C 5 min SERIES Light fastness Fair
Weather fastness Fair Acid fastness Fair Alkali fastness Low Solvent fastness Excellent
CONVENTIONAL (L)
RESISTANT (RS) Heat fastness 240o - 260o C 5 min SERIES Light fastness High
Weather fastness High Acid fastness High Alkali fastness Low Solvent fastness Excellent
Nubiterm K SERIES Heat fastness 300o C 5 min Light fastness High Weather fastness High Acid fastness High Alkali fastness Low Solvent fastness Excellent
RECOMMENDED PRODUCTS NRC-36 Resistant scarlet shade Nubiterm NK-38 High heat fastness orange shade
NB Ferro has not requested the REACH authorization for the use of Molybdate Oranges in the European Union
bull bull
bull bull
bull bull
bull bull
bull bull
MAIN CHARACTERISTICS
CuCr2O4
Pigment Black 28 (CI 77428)
Spinel Structure
Bluish deep shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light NIR absorbent
MAIN CHARACTERISTICS
Cr2O3
Pigment Green 17 ( CI 77288)
Hematite structure
Brownish to bluish black shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with high NIR reflectance (ldquocoolrdquo pigment)
PG17 CHROMIUM
GREEN-BLACK HEMATITE
BLACK PBk28 COPPER CHROMITE BLACK SPINEL
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS V-7709 Standard grade V-7710 Standard grade
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineer-ing Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness Light fastness
Weather fastness Acid fastness Alkali fastness Solvent fastness
gt500oC 5 min Excellent (8 on blue wool scale) Excellent (5 on grey scale) Excellent Excellent Excellent
RECOMMENDED PRODUCTS V-772 Reddish shade V-775 The most bluish shade
V-774 High tinting strength bluish shade
bull bull
bull bull
bull bull
bull bull
bull bull
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with high NIR reflectance (ldquocoolrdquo pigment)
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
MAIN CHARACTERISTICS
(CrFe)2O3
Pigment Brown 29 (CI 77500)
Hematite structure
Brownish to bluish black shade
MAIN CHARACTERISTICS MANGANESE CHROME IRON
Ease of dispersion
MnFe2O4
Pigment Black 26 (CI 77494)
Spinel structure
Very bluishdeep shade the strongest black CICP
Ease of dispersion
SPINEL
PBk26 FERRITE BLACK BROWN
PBr29
HEMATITE
BLACK
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS 10466 Reddish shade V-780 Strong reddish shade
V-760 Yellowish shade V-781 Strong reddish shade
V-778 Yellowish shade V-785 The most bluish shade
V-778-2 Yellow reddish shade V-10121-2 Dark brown
Excellent dimensional stability no warping no shrinkage
Opaque to visible light UVNIR absorbent
The black CICP with the highest heat fastness
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness gt500oC 5 min Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS F-6331-2 High tinting strength very bluish shade
bull bull
bull bull
bull
bull bull
bull
bull bull
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with moderate NIR reflectance (ldquocoolrdquo pigment)
Used when neither Carbon Black nor Black Iron Oxide can be used for technical reasons
PBk11 IRON OXIDE
BLACK
BLACK MAIN CHARACTERISTICS
MnFe2O
PBk33
4
Pigment Black 33 (CI 77537)
Hematite structure
Brownish to bluish black shade
Ease of dispersion
MANGANESE FERRITE BLACK OXIDE
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
Heat fastness 180oC 5 min Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS 24-3303 Reddish shade Nubifer NB-803K Bluish shade
MAIN CHARACTERISTICS
Fe3O4
Pigment Black 11 (CI 77499)
Magnetite structure
Bluish black shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light NIR absorbent
Suitable for low processing temperature Polyolefins PVC (just unplasticized compounds the more stabilized the PVC is the more suitable conventional Black Iron Oxides become) and Rubber
RECOMMENDED PRODUCTS Nubifer NB-5970 Micronized high tinting strength very bluish shade
COOL PIGMENTS MAIN CHARACTERISTICS
It is well known that under the sun dark surfaces become hot and white surfaces remain cooler When comparing a white plastic part containing TiO2 (Near Infrared -NIR- reflecting pigment) with a black plastic part containing Carbon Black (Near Infrared -NIR- absorbent pigment) the surface temperature difference can reach more than 30degC on a hot sunny day This common effect is not only related to color but also to NIR absorption of the pigments used in a particular application By using the appropriate pigments even dark surfaces can stay cool under the sun This type of pigments also referred to as Cool Pigments do not absorb the NIR portion of wavelengths coming from sunlight There are 2 types of Cool Pigments NIR reflecting pigments and NIR transparent pigments The final behavior of the latter will be influenced by the entire system therefore when using NIR transparent pigments it is recommended to use them in combination with NIR reflecting pigments or substrates Ferro Pigments has a full range of Cool Pigments and many years of experience developing projects in this field so we are the ideal partner to support you in your cool projects
MAIN APPLICATIONS AND BENEFITS APPLICATIONS
PVC applications eg siding window profiles
Agricultural film
Plastic roof tiles
Sport fields and synthetic turfartificial grass
Automotive applications eg dashboards steering wheels upholstery
Fiber applications eg garment carpets
Single ply roofing systems
Black coloration of plastics to be recycled by NIR sensor sorting systems
BENEFITS
Increased service life due to less thermal stress on the plastic parts
Reduced air conditioning and energy consumption
Increased comfort Increased Health and Safety
Increased protection against thermal degradation of goods packaged with ldquocoolrdquo plastics
Recycle black parts to create economical value and reduce waste disposal
Ferro offers a full range of Cool Pigments in the whole color spectrum
MAIN PRODUCTS
bull bull bull bull bull
bull
bull bullbullbull
bull
regFERRO Where innovation delivers performancetrade
COOL PIGMENTS FERRO COOL PIGMENTS COLOR SPACE
COOL PIGMENTS (High NIR Reflectance) PY53 Nickel Antimony Titanium
Yellow Rutile
PBr24 Chrome Antimony Titanium Buff Rutile
PY184 Bismuth Vanadate
PG17 Chromium Green-Black Hematite
PY184 PG17 Chrome Oxide Green
PBr29 Chrome Iron Brown Hematite
PY164 Manganese Antimony Titanium Buff Rutile
PBr24PY53
COOL PIGMENTS PBk12 (Moderate NIR Reflectance PY119 PR101or NIR transparency)
PG50 PG17 Transparent to NIR PY164
PG50 PG26Ni Free PBk12 Iron Titanium Brown Spinel PBr29 PB28 Cobalt Aluminate Blue PBk33PB28 PG17
Spinel Turquoise PB36 PB36 Cobalt Chromite Blue-Green Turquoise
Spinel
PBk33 Manganese Ferrite Black Oxide
PG26 Cobalt Chromite Green PV15 PB36 Spinel
PG50 Cobalt Titanate Green PB28 Spinel
PR101 Iron Oxide Red PB29PY119 Zinc Ferrite Brown Spinel
PB29 Ultramarine Blue
PV15 Ultramarine Violet
bull
bull
bull bull
middotmiddotmiddot
middot- - -middotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddot-middot middot-
middotmiddotmiddotmiddotmiddotmiddot- middotmiddotmiddotmiddotmiddotmiddotmiddot- middotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddot-middotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddotmiddot-middotmiddotmiddotmiddot middot-middotmiddotmiddotmiddot
bull bull
PG17 CHROME OXIDE GREEN
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
MAIN CHARACTERISTICS
CoCr2O4
Pigment Green 26 (CI 77344)
Spinel structure
Dark bluish green shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with moderate NIR reflectance (ldquocoolrdquo pigment)
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
MAIN CHARACTERISTICS
Cr2O3
Pigment Green 17 (CI 77288)
PrismaticRhombohedral structure
Olive green shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with high NIR reflectance (ldquocoolrdquo pigment)
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness 500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
PG26 COBALT
CHROMITE GREEN SPINEL
GREEN
RECOMMENDED PRODUCTS SMM SERIES Nubicrom SERIES The micronized Chrome Oxide Greens The highly micronizedhigh dispersibility
Chrome Oxide Greens SMM-4 Bluish shade
SMM-6 Yellowish shade Nubicrom 02 Yellowish shade
SMM-7 Yellowish shade
RECOMMENDED PRODUCTS V-12600 Camouflage Green bluish shade V-12604 Camouflage Green yellowish shade
bull
bull
bull
bull
bull
PG50 COBALT TITANATE GREEN SPINEL
MAIN CHARACTERISTICS
Co2TiO4
Pigment Green 50 (CI 77377)
Spinel structure
Bright green shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque with moderate NIR reflectance (ldquocoolrdquo pigment)
Ni free products available
GREEN
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS V-11633 Standard grade 21-5901 Ni free (CMR classification free)
yellowish shade 21-4030 High tinting strength bluish shade 21-4345 Ni free (CMR classification free) 21-5801 Ni free (CMR classification free)
color like 21-4045 bluish shade
V-9229 Turquoise Blue greenish shade
bull
bull bull
bull bull
bull bull
bull bull
bull bull
YYYYEEEELLLLLLLLOOOOWWWW PY53 NICKEL ANTIMONY MAIN CHARACTERISTICS TITANIUM
(TiNiSb) O2YELLOW RUTILE Pigment Yellow 53 (CI 77788)
Rutile structure
Light yellow shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with high NIR reflectance (ldquocoolrdquo pigment)
BISMUTH VANADATE
PY184 MAIN CHARACTERISTICS
BiVO4
Pigment Yellow 184 (CI 771740)
Bright primrose yellow shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with high NIR reflectance (ldquocoolrdquo pigment)
Possible replacement of Chrome Yellows in combination with Organics
Possible replacement of Chrome Yellows in combination with Organics
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
Suitable for low processing temperature Polyolefins PVC and Rubber
Heat fastness 220oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent () IMPORTANT NOTE
For high heat fastness Bismuth Vanadates please check our available products in our legacy Cappelle pigments brochure
RECOMMENDED PRODUCTS 10401 Standard grade V-9412 Strong greenish shade
V-9415 Standard greenish shade V-9416 Unique reddish shade
RECOMMENDED PRODUCTS Nubivan Y-901 Standard grade very greenish
bull
bull
bull
bull
bull
bull
bull
bull
~
bull
bull
MAIN CHARACTERISTICS
PbCrO4
Pigment Yellow 34 (CI 77603)
Ease of dispersion
Opaque to visible light
PY34 CHROME YELLOW
YELLOW RECOMMENDED PRODUCTS AD-74 Conventional middle yellow Nubiterm AK-74 High heat fastness PbSO4 middle yellow AD-81 Conventional lemon yellow
Nubiterm AK-81 High heat fastness AL-90 Conventional primrose yellow Monoclinic to Rhombic structure depending on shade lemon yellow
Bright yellow shade (middle lemon and primrose) NB Ferro has not requested the REACH authorization for the use of Chrome Yellows in the European Union
Excellent dimensional stability no warping no shrinkage
Suitable for Polyolefins PS ABS Engineering Polymers (depending on processing temperature) PVC and Rubber
CONVENTIONAL (LD) Heat fastness 180oC 5 min SERIES Light fastness MiddleLemon = Fair Primrose = Low
Weather fastness MiddleLemon = Medium Primrose = Low
Acid fastness Fair Alkali fastness Low
Solvent fastness Excellent
RESISTANT (RS) SERIES Heat fastness 220-260oC 5 min
Light fastness MiddleLemon = High Primrose = Fair Weather fastness MiddleLemon = High Primrose = Fair Acid fastness High
Alkali fastness Low
Solvent fastness Excellent
Nubiterm K SERIES Heat fastness 300oC 5 min
Light fastness High
Weather fastness High Acid fastness High
Alkali fastness Low
Solvent fastness Excellent
bull
bull
bull bull
bull bull
bull bull
bull bull
bull
bull bull
BUFF PBr24 CHROME MAIN CHARACTERISTICS ANTIMONY
(TiCrSb) O2TITANIUM BUFF RUTILE Pigment Brown 24 (CI 77310)
Rutile structure
Clean buff shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with high NIR reflectance (ldquocoolrdquo pigment)
Possible replacement of Chrome Yellows in combination with Organics
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS 10406 Standard grade yellowish shade V-9118 Yellowish shade
10408 Standard grade reddish shade V-12112 High tinting strength reddish shade
10411 Strong greenish shade 10657 High tinting strength reddish blue
MAIN CHARACTERISTICS
FeOOH
Pigment Yellow 42 (CI 77492)
Goethite structure
Dull buff shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with low NIR reflectance
PY42 IRON OXIDE
YELLOW
Possible replacement of Chrome Yellows in combination with Organics
Good coloristics to combine with Organics and Inorganics to reach specific colors at very competitive cost eg natural greens bright reds chocolate browns light beiges
Conventional grades are suitable for low processing temperature Polyolefins PVC (just unplasticized compounds the more stabilized the PVC is the more suitable conventional Yellow Iron Oxides become) and Rubber Nubifer Y-7050 is suitable for medium processing temperature Polyolefins PS ABS PVC (plasticized and unplasticized compounds the more stabilized the PVC is the more suitable Nubifer Y-7050 becomes) and Rubber
Heat fastness 160oC 5 min except Nubifer Y-7050 (260oC 5 min)
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS Nubifer Y-5000 SERIES Nubifer Y-7000 SERIES The micronizedhigh dispersibilitynarrow The micronized higher heat fastness than colorimetric tolerance Yellow Iron Oxides conventional Yellow Iron Oxides
Nubifer Y-5010 Light shade Nubifer Y-7050 Encapsulated grade for medium processing Nubifer Y-5021 Reddish shade temperature resins (heat fastness = 260degC 5 min) and PVC (more suitable for unplasticized PVC compounds than conventional Yellow Iron Oxides)
bull
bull
bull
bull
bull
bull
bull
bull
PY119 ZINC FERRITE BROWN SPINEL
MAIN CHARACTERISTICS
ZnFe2O4
Pigment Yellow 119 (CI 77496)
Spinel structure
Reddish buff shade
Ease of dispersion
(ldquocoolrdquo pigment)
BUFFBUFFBUFF
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with moderate NIR reflectance
Possible replacement of Chrome Yellows in combination with Organics
Good coloristics to combine with Organics and Inorganics to reach specific colors at very competitive cost eg natural greens bright reds chocolate browns light beiges
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers PVC Silicones and Rubber
Heat fastness Nubifer Y-805K (300oC 5 min) Nubifer Y-905K (260oC 5 min)
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS Nubifer Y-805K 10520 Very high heat fastness spinel Very high heat fastness yellowish shade (300degC 5 min) dark reddish shade V-9117 Very high heat fastness spinel Nubifer Y-905K yellowish shade High heat fastness (260degC 5 min) light yellowish shade
bull
bull bull
bull bull
bull bull
bull bull
BBBUUUFFFFFF PY164 MANGANESE MAIN CHARACTERISTICS ANTIMONY
(TiMnSb) O2TITANIUM BUFF RUTILE Pigment Yellow 164 ( CI 77899)
Dark brown shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with high NIR reflectance (ldquocoolrdquo pigment)
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fast Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS 10550 Standard grade V-12100 Bluish shade
MAIN CHARACTERISTICS
Fe2TiO4
Pigment Black 12 (CI 77543)
Buff shade similar to PBr24 without containing Cr3+
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with moderate NIR reflectance (ldquocoolrdquo pigment)
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
PBk12 IRON
TITANIUM BROWN
SPINEL
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS 10358 Standard grade
bull
bull
bull bull
bull bull
- - -_middotmiddotmiddotmiddot - ---
~_ bullbullbullbull ------- - -~~
bull
bull
MAIN CHARACTERISTICS Fe2O3
Pigment Red 101 (CI 77491)
Hematite structure
Dull red shade
Ease of dispersion
MAIN CHARACTERISTICS PbCrO4PbSO4PbMoO4
Pigment Red 104 (CI 77605)
Tetragonal structure
Bright red shade (orange scarlet and red)
Ease of dispersion
PR104 MOLYBDATE
ORANGE
PR101 IRON OXIDE RED
RED
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with moderate NIR reflectance (ldquocoolrdquo pigment)
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC (plasticized and unplasticized compounds the more stabilized the PVC is the more suitable Red Iron Oxides become) Silicones and Rubber
Heat fastness 500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS Nubifer R-5500 SERIES
The micronizedhigh dispersibilitynarrow colorimetric tolerance Red Iron Oxides
Nubifer R-5501 Nubifer R-5510 Nubifer R-5520 Nubifer R-5530
The most yellowishlightest shade
Yellowish shade
Yellowish-medium shade
Yellowish-medium shade
Nubifer R-5540 Bluish-medium shade
Nubifer R-5560 Bluish-medium shade
Nubifer R-5580C The most bluishdarkest shade
Excellent dimensional stability no warping no shrinkage
Opaque to visible light
Suitable for Polyolefins PS ABS Engineering Polymers (depending on processing temperature) PVC and Rubber
Heat fastness 180o - 200o C 5 min SERIES Light fastness Fair
Weather fastness Fair Acid fastness Fair Alkali fastness Low Solvent fastness Excellent
CONVENTIONAL (L)
RESISTANT (RS) Heat fastness 240o - 260o C 5 min SERIES Light fastness High
Weather fastness High Acid fastness High Alkali fastness Low Solvent fastness Excellent
Nubiterm K SERIES Heat fastness 300o C 5 min Light fastness High Weather fastness High Acid fastness High Alkali fastness Low Solvent fastness Excellent
RECOMMENDED PRODUCTS NRC-36 Resistant scarlet shade Nubiterm NK-38 High heat fastness orange shade
NB Ferro has not requested the REACH authorization for the use of Molybdate Oranges in the European Union
bull bull
bull bull
bull bull
bull bull
bull bull
MAIN CHARACTERISTICS
CuCr2O4
Pigment Black 28 (CI 77428)
Spinel Structure
Bluish deep shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light NIR absorbent
MAIN CHARACTERISTICS
Cr2O3
Pigment Green 17 ( CI 77288)
Hematite structure
Brownish to bluish black shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with high NIR reflectance (ldquocoolrdquo pigment)
PG17 CHROMIUM
GREEN-BLACK HEMATITE
BLACK PBk28 COPPER CHROMITE BLACK SPINEL
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS V-7709 Standard grade V-7710 Standard grade
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineer-ing Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness Light fastness
Weather fastness Acid fastness Alkali fastness Solvent fastness
gt500oC 5 min Excellent (8 on blue wool scale) Excellent (5 on grey scale) Excellent Excellent Excellent
RECOMMENDED PRODUCTS V-772 Reddish shade V-775 The most bluish shade
V-774 High tinting strength bluish shade
bull bull
bull bull
bull bull
bull bull
bull bull
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with high NIR reflectance (ldquocoolrdquo pigment)
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
MAIN CHARACTERISTICS
(CrFe)2O3
Pigment Brown 29 (CI 77500)
Hematite structure
Brownish to bluish black shade
MAIN CHARACTERISTICS MANGANESE CHROME IRON
Ease of dispersion
MnFe2O4
Pigment Black 26 (CI 77494)
Spinel structure
Very bluishdeep shade the strongest black CICP
Ease of dispersion
SPINEL
PBk26 FERRITE BLACK BROWN
PBr29
HEMATITE
BLACK
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS 10466 Reddish shade V-780 Strong reddish shade
V-760 Yellowish shade V-781 Strong reddish shade
V-778 Yellowish shade V-785 The most bluish shade
V-778-2 Yellow reddish shade V-10121-2 Dark brown
Excellent dimensional stability no warping no shrinkage
Opaque to visible light UVNIR absorbent
The black CICP with the highest heat fastness
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness gt500oC 5 min Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS F-6331-2 High tinting strength very bluish shade
bull bull
bull bull
bull
bull bull
bull
bull bull
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with moderate NIR reflectance (ldquocoolrdquo pigment)
Used when neither Carbon Black nor Black Iron Oxide can be used for technical reasons
PBk11 IRON OXIDE
BLACK
BLACK MAIN CHARACTERISTICS
MnFe2O
PBk33
4
Pigment Black 33 (CI 77537)
Hematite structure
Brownish to bluish black shade
Ease of dispersion
MANGANESE FERRITE BLACK OXIDE
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
Heat fastness 180oC 5 min Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS 24-3303 Reddish shade Nubifer NB-803K Bluish shade
MAIN CHARACTERISTICS
Fe3O4
Pigment Black 11 (CI 77499)
Magnetite structure
Bluish black shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light NIR absorbent
Suitable for low processing temperature Polyolefins PVC (just unplasticized compounds the more stabilized the PVC is the more suitable conventional Black Iron Oxides become) and Rubber
RECOMMENDED PRODUCTS Nubifer NB-5970 Micronized high tinting strength very bluish shade
COOL PIGMENTS MAIN CHARACTERISTICS
It is well known that under the sun dark surfaces become hot and white surfaces remain cooler When comparing a white plastic part containing TiO2 (Near Infrared -NIR- reflecting pigment) with a black plastic part containing Carbon Black (Near Infrared -NIR- absorbent pigment) the surface temperature difference can reach more than 30degC on a hot sunny day This common effect is not only related to color but also to NIR absorption of the pigments used in a particular application By using the appropriate pigments even dark surfaces can stay cool under the sun This type of pigments also referred to as Cool Pigments do not absorb the NIR portion of wavelengths coming from sunlight There are 2 types of Cool Pigments NIR reflecting pigments and NIR transparent pigments The final behavior of the latter will be influenced by the entire system therefore when using NIR transparent pigments it is recommended to use them in combination with NIR reflecting pigments or substrates Ferro Pigments has a full range of Cool Pigments and many years of experience developing projects in this field so we are the ideal partner to support you in your cool projects
MAIN APPLICATIONS AND BENEFITS APPLICATIONS
PVC applications eg siding window profiles
Agricultural film
Plastic roof tiles
Sport fields and synthetic turfartificial grass
Automotive applications eg dashboards steering wheels upholstery
Fiber applications eg garment carpets
Single ply roofing systems
Black coloration of plastics to be recycled by NIR sensor sorting systems
BENEFITS
Increased service life due to less thermal stress on the plastic parts
Reduced air conditioning and energy consumption
Increased comfort Increased Health and Safety
Increased protection against thermal degradation of goods packaged with ldquocoolrdquo plastics
Recycle black parts to create economical value and reduce waste disposal
Ferro offers a full range of Cool Pigments in the whole color spectrum
MAIN PRODUCTS
bull bull bull bull bull
bull
bull bullbullbull
bull
regFERRO Where innovation delivers performancetrade
COOL PIGMENTS FERRO COOL PIGMENTS COLOR SPACE
COOL PIGMENTS (High NIR Reflectance) PY53 Nickel Antimony Titanium
Yellow Rutile
PBr24 Chrome Antimony Titanium Buff Rutile
PY184 Bismuth Vanadate
PG17 Chromium Green-Black Hematite
PY184 PG17 Chrome Oxide Green
PBr29 Chrome Iron Brown Hematite
PY164 Manganese Antimony Titanium Buff Rutile
PBr24PY53
COOL PIGMENTS PBk12 (Moderate NIR Reflectance PY119 PR101or NIR transparency)
PG50 PG17 Transparent to NIR PY164
PG50 PG26Ni Free PBk12 Iron Titanium Brown Spinel PBr29 PB28 Cobalt Aluminate Blue PBk33PB28 PG17
Spinel Turquoise PB36 PB36 Cobalt Chromite Blue-Green Turquoise
Spinel
PBk33 Manganese Ferrite Black Oxide
PG26 Cobalt Chromite Green PV15 PB36 Spinel
PG50 Cobalt Titanate Green PB28 Spinel
PR101 Iron Oxide Red PB29PY119 Zinc Ferrite Brown Spinel
PB29 Ultramarine Blue
PV15 Ultramarine Violet
bull
bull
bull
bull
bull
PG50 COBALT TITANATE GREEN SPINEL
MAIN CHARACTERISTICS
Co2TiO4
Pigment Green 50 (CI 77377)
Spinel structure
Bright green shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque with moderate NIR reflectance (ldquocoolrdquo pigment)
Ni free products available
GREEN
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS V-11633 Standard grade 21-5901 Ni free (CMR classification free)
yellowish shade 21-4030 High tinting strength bluish shade 21-4345 Ni free (CMR classification free) 21-5801 Ni free (CMR classification free)
color like 21-4045 bluish shade
V-9229 Turquoise Blue greenish shade
bull
bull bull
bull bull
bull bull
bull bull
bull bull
YYYYEEEELLLLLLLLOOOOWWWW PY53 NICKEL ANTIMONY MAIN CHARACTERISTICS TITANIUM
(TiNiSb) O2YELLOW RUTILE Pigment Yellow 53 (CI 77788)
Rutile structure
Light yellow shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with high NIR reflectance (ldquocoolrdquo pigment)
BISMUTH VANADATE
PY184 MAIN CHARACTERISTICS
BiVO4
Pigment Yellow 184 (CI 771740)
Bright primrose yellow shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with high NIR reflectance (ldquocoolrdquo pigment)
Possible replacement of Chrome Yellows in combination with Organics
Possible replacement of Chrome Yellows in combination with Organics
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
Suitable for low processing temperature Polyolefins PVC and Rubber
Heat fastness 220oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent () IMPORTANT NOTE
For high heat fastness Bismuth Vanadates please check our available products in our legacy Cappelle pigments brochure
RECOMMENDED PRODUCTS 10401 Standard grade V-9412 Strong greenish shade
V-9415 Standard greenish shade V-9416 Unique reddish shade
RECOMMENDED PRODUCTS Nubivan Y-901 Standard grade very greenish
bull
bull
bull
bull
bull
bull
bull
bull
~
bull
bull
MAIN CHARACTERISTICS
PbCrO4
Pigment Yellow 34 (CI 77603)
Ease of dispersion
Opaque to visible light
PY34 CHROME YELLOW
YELLOW RECOMMENDED PRODUCTS AD-74 Conventional middle yellow Nubiterm AK-74 High heat fastness PbSO4 middle yellow AD-81 Conventional lemon yellow
Nubiterm AK-81 High heat fastness AL-90 Conventional primrose yellow Monoclinic to Rhombic structure depending on shade lemon yellow
Bright yellow shade (middle lemon and primrose) NB Ferro has not requested the REACH authorization for the use of Chrome Yellows in the European Union
Excellent dimensional stability no warping no shrinkage
Suitable for Polyolefins PS ABS Engineering Polymers (depending on processing temperature) PVC and Rubber
CONVENTIONAL (LD) Heat fastness 180oC 5 min SERIES Light fastness MiddleLemon = Fair Primrose = Low
Weather fastness MiddleLemon = Medium Primrose = Low
Acid fastness Fair Alkali fastness Low
Solvent fastness Excellent
RESISTANT (RS) SERIES Heat fastness 220-260oC 5 min
Light fastness MiddleLemon = High Primrose = Fair Weather fastness MiddleLemon = High Primrose = Fair Acid fastness High
Alkali fastness Low
Solvent fastness Excellent
Nubiterm K SERIES Heat fastness 300oC 5 min
Light fastness High
Weather fastness High Acid fastness High
Alkali fastness Low
Solvent fastness Excellent
bull
bull
bull bull
bull bull
bull bull
bull bull
bull
bull bull
BUFF PBr24 CHROME MAIN CHARACTERISTICS ANTIMONY
(TiCrSb) O2TITANIUM BUFF RUTILE Pigment Brown 24 (CI 77310)
Rutile structure
Clean buff shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with high NIR reflectance (ldquocoolrdquo pigment)
Possible replacement of Chrome Yellows in combination with Organics
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS 10406 Standard grade yellowish shade V-9118 Yellowish shade
10408 Standard grade reddish shade V-12112 High tinting strength reddish shade
10411 Strong greenish shade 10657 High tinting strength reddish blue
MAIN CHARACTERISTICS
FeOOH
Pigment Yellow 42 (CI 77492)
Goethite structure
Dull buff shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with low NIR reflectance
PY42 IRON OXIDE
YELLOW
Possible replacement of Chrome Yellows in combination with Organics
Good coloristics to combine with Organics and Inorganics to reach specific colors at very competitive cost eg natural greens bright reds chocolate browns light beiges
Conventional grades are suitable for low processing temperature Polyolefins PVC (just unplasticized compounds the more stabilized the PVC is the more suitable conventional Yellow Iron Oxides become) and Rubber Nubifer Y-7050 is suitable for medium processing temperature Polyolefins PS ABS PVC (plasticized and unplasticized compounds the more stabilized the PVC is the more suitable Nubifer Y-7050 becomes) and Rubber
Heat fastness 160oC 5 min except Nubifer Y-7050 (260oC 5 min)
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS Nubifer Y-5000 SERIES Nubifer Y-7000 SERIES The micronizedhigh dispersibilitynarrow The micronized higher heat fastness than colorimetric tolerance Yellow Iron Oxides conventional Yellow Iron Oxides
Nubifer Y-5010 Light shade Nubifer Y-7050 Encapsulated grade for medium processing Nubifer Y-5021 Reddish shade temperature resins (heat fastness = 260degC 5 min) and PVC (more suitable for unplasticized PVC compounds than conventional Yellow Iron Oxides)
bull
bull
bull
bull
bull
bull
bull
bull
PY119 ZINC FERRITE BROWN SPINEL
MAIN CHARACTERISTICS
ZnFe2O4
Pigment Yellow 119 (CI 77496)
Spinel structure
Reddish buff shade
Ease of dispersion
(ldquocoolrdquo pigment)
BUFFBUFFBUFF
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with moderate NIR reflectance
Possible replacement of Chrome Yellows in combination with Organics
Good coloristics to combine with Organics and Inorganics to reach specific colors at very competitive cost eg natural greens bright reds chocolate browns light beiges
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers PVC Silicones and Rubber
Heat fastness Nubifer Y-805K (300oC 5 min) Nubifer Y-905K (260oC 5 min)
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS Nubifer Y-805K 10520 Very high heat fastness spinel Very high heat fastness yellowish shade (300degC 5 min) dark reddish shade V-9117 Very high heat fastness spinel Nubifer Y-905K yellowish shade High heat fastness (260degC 5 min) light yellowish shade
bull
bull bull
bull bull
bull bull
bull bull
BBBUUUFFFFFF PY164 MANGANESE MAIN CHARACTERISTICS ANTIMONY
(TiMnSb) O2TITANIUM BUFF RUTILE Pigment Yellow 164 ( CI 77899)
Dark brown shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with high NIR reflectance (ldquocoolrdquo pigment)
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fast Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS 10550 Standard grade V-12100 Bluish shade
MAIN CHARACTERISTICS
Fe2TiO4
Pigment Black 12 (CI 77543)
Buff shade similar to PBr24 without containing Cr3+
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with moderate NIR reflectance (ldquocoolrdquo pigment)
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
PBk12 IRON
TITANIUM BROWN
SPINEL
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS 10358 Standard grade
bull
bull
bull bull
bull bull
- - -_middotmiddotmiddotmiddot - ---
~_ bullbullbullbull ------- - -~~
bull
bull
MAIN CHARACTERISTICS Fe2O3
Pigment Red 101 (CI 77491)
Hematite structure
Dull red shade
Ease of dispersion
MAIN CHARACTERISTICS PbCrO4PbSO4PbMoO4
Pigment Red 104 (CI 77605)
Tetragonal structure
Bright red shade (orange scarlet and red)
Ease of dispersion
PR104 MOLYBDATE
ORANGE
PR101 IRON OXIDE RED
RED
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with moderate NIR reflectance (ldquocoolrdquo pigment)
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC (plasticized and unplasticized compounds the more stabilized the PVC is the more suitable Red Iron Oxides become) Silicones and Rubber
Heat fastness 500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS Nubifer R-5500 SERIES
The micronizedhigh dispersibilitynarrow colorimetric tolerance Red Iron Oxides
Nubifer R-5501 Nubifer R-5510 Nubifer R-5520 Nubifer R-5530
The most yellowishlightest shade
Yellowish shade
Yellowish-medium shade
Yellowish-medium shade
Nubifer R-5540 Bluish-medium shade
Nubifer R-5560 Bluish-medium shade
Nubifer R-5580C The most bluishdarkest shade
Excellent dimensional stability no warping no shrinkage
Opaque to visible light
Suitable for Polyolefins PS ABS Engineering Polymers (depending on processing temperature) PVC and Rubber
Heat fastness 180o - 200o C 5 min SERIES Light fastness Fair
Weather fastness Fair Acid fastness Fair Alkali fastness Low Solvent fastness Excellent
CONVENTIONAL (L)
RESISTANT (RS) Heat fastness 240o - 260o C 5 min SERIES Light fastness High
Weather fastness High Acid fastness High Alkali fastness Low Solvent fastness Excellent
Nubiterm K SERIES Heat fastness 300o C 5 min Light fastness High Weather fastness High Acid fastness High Alkali fastness Low Solvent fastness Excellent
RECOMMENDED PRODUCTS NRC-36 Resistant scarlet shade Nubiterm NK-38 High heat fastness orange shade
NB Ferro has not requested the REACH authorization for the use of Molybdate Oranges in the European Union
bull bull
bull bull
bull bull
bull bull
bull bull
MAIN CHARACTERISTICS
CuCr2O4
Pigment Black 28 (CI 77428)
Spinel Structure
Bluish deep shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light NIR absorbent
MAIN CHARACTERISTICS
Cr2O3
Pigment Green 17 ( CI 77288)
Hematite structure
Brownish to bluish black shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with high NIR reflectance (ldquocoolrdquo pigment)
PG17 CHROMIUM
GREEN-BLACK HEMATITE
BLACK PBk28 COPPER CHROMITE BLACK SPINEL
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS V-7709 Standard grade V-7710 Standard grade
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineer-ing Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness Light fastness
Weather fastness Acid fastness Alkali fastness Solvent fastness
gt500oC 5 min Excellent (8 on blue wool scale) Excellent (5 on grey scale) Excellent Excellent Excellent
RECOMMENDED PRODUCTS V-772 Reddish shade V-775 The most bluish shade
V-774 High tinting strength bluish shade
bull bull
bull bull
bull bull
bull bull
bull bull
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with high NIR reflectance (ldquocoolrdquo pigment)
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
MAIN CHARACTERISTICS
(CrFe)2O3
Pigment Brown 29 (CI 77500)
Hematite structure
Brownish to bluish black shade
MAIN CHARACTERISTICS MANGANESE CHROME IRON
Ease of dispersion
MnFe2O4
Pigment Black 26 (CI 77494)
Spinel structure
Very bluishdeep shade the strongest black CICP
Ease of dispersion
SPINEL
PBk26 FERRITE BLACK BROWN
PBr29
HEMATITE
BLACK
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS 10466 Reddish shade V-780 Strong reddish shade
V-760 Yellowish shade V-781 Strong reddish shade
V-778 Yellowish shade V-785 The most bluish shade
V-778-2 Yellow reddish shade V-10121-2 Dark brown
Excellent dimensional stability no warping no shrinkage
Opaque to visible light UVNIR absorbent
The black CICP with the highest heat fastness
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness gt500oC 5 min Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS F-6331-2 High tinting strength very bluish shade
bull bull
bull bull
bull
bull bull
bull
bull bull
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with moderate NIR reflectance (ldquocoolrdquo pigment)
Used when neither Carbon Black nor Black Iron Oxide can be used for technical reasons
PBk11 IRON OXIDE
BLACK
BLACK MAIN CHARACTERISTICS
MnFe2O
PBk33
4
Pigment Black 33 (CI 77537)
Hematite structure
Brownish to bluish black shade
Ease of dispersion
MANGANESE FERRITE BLACK OXIDE
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
Heat fastness 180oC 5 min Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS 24-3303 Reddish shade Nubifer NB-803K Bluish shade
MAIN CHARACTERISTICS
Fe3O4
Pigment Black 11 (CI 77499)
Magnetite structure
Bluish black shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light NIR absorbent
Suitable for low processing temperature Polyolefins PVC (just unplasticized compounds the more stabilized the PVC is the more suitable conventional Black Iron Oxides become) and Rubber
RECOMMENDED PRODUCTS Nubifer NB-5970 Micronized high tinting strength very bluish shade
COOL PIGMENTS MAIN CHARACTERISTICS
It is well known that under the sun dark surfaces become hot and white surfaces remain cooler When comparing a white plastic part containing TiO2 (Near Infrared -NIR- reflecting pigment) with a black plastic part containing Carbon Black (Near Infrared -NIR- absorbent pigment) the surface temperature difference can reach more than 30degC on a hot sunny day This common effect is not only related to color but also to NIR absorption of the pigments used in a particular application By using the appropriate pigments even dark surfaces can stay cool under the sun This type of pigments also referred to as Cool Pigments do not absorb the NIR portion of wavelengths coming from sunlight There are 2 types of Cool Pigments NIR reflecting pigments and NIR transparent pigments The final behavior of the latter will be influenced by the entire system therefore when using NIR transparent pigments it is recommended to use them in combination with NIR reflecting pigments or substrates Ferro Pigments has a full range of Cool Pigments and many years of experience developing projects in this field so we are the ideal partner to support you in your cool projects
MAIN APPLICATIONS AND BENEFITS APPLICATIONS
PVC applications eg siding window profiles
Agricultural film
Plastic roof tiles
Sport fields and synthetic turfartificial grass
Automotive applications eg dashboards steering wheels upholstery
Fiber applications eg garment carpets
Single ply roofing systems
Black coloration of plastics to be recycled by NIR sensor sorting systems
BENEFITS
Increased service life due to less thermal stress on the plastic parts
Reduced air conditioning and energy consumption
Increased comfort Increased Health and Safety
Increased protection against thermal degradation of goods packaged with ldquocoolrdquo plastics
Recycle black parts to create economical value and reduce waste disposal
Ferro offers a full range of Cool Pigments in the whole color spectrum
MAIN PRODUCTS
bull bull bull bull bull
bull
bull bullbullbull
bull
regFERRO Where innovation delivers performancetrade
COOL PIGMENTS FERRO COOL PIGMENTS COLOR SPACE
COOL PIGMENTS (High NIR Reflectance) PY53 Nickel Antimony Titanium
Yellow Rutile
PBr24 Chrome Antimony Titanium Buff Rutile
PY184 Bismuth Vanadate
PG17 Chromium Green-Black Hematite
PY184 PG17 Chrome Oxide Green
PBr29 Chrome Iron Brown Hematite
PY164 Manganese Antimony Titanium Buff Rutile
PBr24PY53
COOL PIGMENTS PBk12 (Moderate NIR Reflectance PY119 PR101or NIR transparency)
PG50 PG17 Transparent to NIR PY164
PG50 PG26Ni Free PBk12 Iron Titanium Brown Spinel PBr29 PB28 Cobalt Aluminate Blue PBk33PB28 PG17
Spinel Turquoise PB36 PB36 Cobalt Chromite Blue-Green Turquoise
Spinel
PBk33 Manganese Ferrite Black Oxide
PG26 Cobalt Chromite Green PV15 PB36 Spinel
PG50 Cobalt Titanate Green PB28 Spinel
PR101 Iron Oxide Red PB29PY119 Zinc Ferrite Brown Spinel
PB29 Ultramarine Blue
PV15 Ultramarine Violet
bull
bull bull
bull bull
bull bull
bull bull
bull bull
YYYYEEEELLLLLLLLOOOOWWWW PY53 NICKEL ANTIMONY MAIN CHARACTERISTICS TITANIUM
(TiNiSb) O2YELLOW RUTILE Pigment Yellow 53 (CI 77788)
Rutile structure
Light yellow shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with high NIR reflectance (ldquocoolrdquo pigment)
BISMUTH VANADATE
PY184 MAIN CHARACTERISTICS
BiVO4
Pigment Yellow 184 (CI 771740)
Bright primrose yellow shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with high NIR reflectance (ldquocoolrdquo pigment)
Possible replacement of Chrome Yellows in combination with Organics
Possible replacement of Chrome Yellows in combination with Organics
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
Suitable for low processing temperature Polyolefins PVC and Rubber
Heat fastness 220oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent () IMPORTANT NOTE
For high heat fastness Bismuth Vanadates please check our available products in our legacy Cappelle pigments brochure
RECOMMENDED PRODUCTS 10401 Standard grade V-9412 Strong greenish shade
V-9415 Standard greenish shade V-9416 Unique reddish shade
RECOMMENDED PRODUCTS Nubivan Y-901 Standard grade very greenish
bull
bull
bull
bull
bull
bull
bull
bull
~
bull
bull
MAIN CHARACTERISTICS
PbCrO4
Pigment Yellow 34 (CI 77603)
Ease of dispersion
Opaque to visible light
PY34 CHROME YELLOW
YELLOW RECOMMENDED PRODUCTS AD-74 Conventional middle yellow Nubiterm AK-74 High heat fastness PbSO4 middle yellow AD-81 Conventional lemon yellow
Nubiterm AK-81 High heat fastness AL-90 Conventional primrose yellow Monoclinic to Rhombic structure depending on shade lemon yellow
Bright yellow shade (middle lemon and primrose) NB Ferro has not requested the REACH authorization for the use of Chrome Yellows in the European Union
Excellent dimensional stability no warping no shrinkage
Suitable for Polyolefins PS ABS Engineering Polymers (depending on processing temperature) PVC and Rubber
CONVENTIONAL (LD) Heat fastness 180oC 5 min SERIES Light fastness MiddleLemon = Fair Primrose = Low
Weather fastness MiddleLemon = Medium Primrose = Low
Acid fastness Fair Alkali fastness Low
Solvent fastness Excellent
RESISTANT (RS) SERIES Heat fastness 220-260oC 5 min
Light fastness MiddleLemon = High Primrose = Fair Weather fastness MiddleLemon = High Primrose = Fair Acid fastness High
Alkali fastness Low
Solvent fastness Excellent
Nubiterm K SERIES Heat fastness 300oC 5 min
Light fastness High
Weather fastness High Acid fastness High
Alkali fastness Low
Solvent fastness Excellent
bull
bull
bull bull
bull bull
bull bull
bull bull
bull
bull bull
BUFF PBr24 CHROME MAIN CHARACTERISTICS ANTIMONY
(TiCrSb) O2TITANIUM BUFF RUTILE Pigment Brown 24 (CI 77310)
Rutile structure
Clean buff shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with high NIR reflectance (ldquocoolrdquo pigment)
Possible replacement of Chrome Yellows in combination with Organics
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS 10406 Standard grade yellowish shade V-9118 Yellowish shade
10408 Standard grade reddish shade V-12112 High tinting strength reddish shade
10411 Strong greenish shade 10657 High tinting strength reddish blue
MAIN CHARACTERISTICS
FeOOH
Pigment Yellow 42 (CI 77492)
Goethite structure
Dull buff shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with low NIR reflectance
PY42 IRON OXIDE
YELLOW
Possible replacement of Chrome Yellows in combination with Organics
Good coloristics to combine with Organics and Inorganics to reach specific colors at very competitive cost eg natural greens bright reds chocolate browns light beiges
Conventional grades are suitable for low processing temperature Polyolefins PVC (just unplasticized compounds the more stabilized the PVC is the more suitable conventional Yellow Iron Oxides become) and Rubber Nubifer Y-7050 is suitable for medium processing temperature Polyolefins PS ABS PVC (plasticized and unplasticized compounds the more stabilized the PVC is the more suitable Nubifer Y-7050 becomes) and Rubber
Heat fastness 160oC 5 min except Nubifer Y-7050 (260oC 5 min)
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS Nubifer Y-5000 SERIES Nubifer Y-7000 SERIES The micronizedhigh dispersibilitynarrow The micronized higher heat fastness than colorimetric tolerance Yellow Iron Oxides conventional Yellow Iron Oxides
Nubifer Y-5010 Light shade Nubifer Y-7050 Encapsulated grade for medium processing Nubifer Y-5021 Reddish shade temperature resins (heat fastness = 260degC 5 min) and PVC (more suitable for unplasticized PVC compounds than conventional Yellow Iron Oxides)
bull
bull
bull
bull
bull
bull
bull
bull
PY119 ZINC FERRITE BROWN SPINEL
MAIN CHARACTERISTICS
ZnFe2O4
Pigment Yellow 119 (CI 77496)
Spinel structure
Reddish buff shade
Ease of dispersion
(ldquocoolrdquo pigment)
BUFFBUFFBUFF
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with moderate NIR reflectance
Possible replacement of Chrome Yellows in combination with Organics
Good coloristics to combine with Organics and Inorganics to reach specific colors at very competitive cost eg natural greens bright reds chocolate browns light beiges
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers PVC Silicones and Rubber
Heat fastness Nubifer Y-805K (300oC 5 min) Nubifer Y-905K (260oC 5 min)
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS Nubifer Y-805K 10520 Very high heat fastness spinel Very high heat fastness yellowish shade (300degC 5 min) dark reddish shade V-9117 Very high heat fastness spinel Nubifer Y-905K yellowish shade High heat fastness (260degC 5 min) light yellowish shade
bull
bull bull
bull bull
bull bull
bull bull
BBBUUUFFFFFF PY164 MANGANESE MAIN CHARACTERISTICS ANTIMONY
(TiMnSb) O2TITANIUM BUFF RUTILE Pigment Yellow 164 ( CI 77899)
Dark brown shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with high NIR reflectance (ldquocoolrdquo pigment)
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fast Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS 10550 Standard grade V-12100 Bluish shade
MAIN CHARACTERISTICS
Fe2TiO4
Pigment Black 12 (CI 77543)
Buff shade similar to PBr24 without containing Cr3+
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with moderate NIR reflectance (ldquocoolrdquo pigment)
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
PBk12 IRON
TITANIUM BROWN
SPINEL
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS 10358 Standard grade
bull
bull
bull bull
bull bull
- - -_middotmiddotmiddotmiddot - ---
~_ bullbullbullbull ------- - -~~
bull
bull
MAIN CHARACTERISTICS Fe2O3
Pigment Red 101 (CI 77491)
Hematite structure
Dull red shade
Ease of dispersion
MAIN CHARACTERISTICS PbCrO4PbSO4PbMoO4
Pigment Red 104 (CI 77605)
Tetragonal structure
Bright red shade (orange scarlet and red)
Ease of dispersion
PR104 MOLYBDATE
ORANGE
PR101 IRON OXIDE RED
RED
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with moderate NIR reflectance (ldquocoolrdquo pigment)
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC (plasticized and unplasticized compounds the more stabilized the PVC is the more suitable Red Iron Oxides become) Silicones and Rubber
Heat fastness 500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS Nubifer R-5500 SERIES
The micronizedhigh dispersibilitynarrow colorimetric tolerance Red Iron Oxides
Nubifer R-5501 Nubifer R-5510 Nubifer R-5520 Nubifer R-5530
The most yellowishlightest shade
Yellowish shade
Yellowish-medium shade
Yellowish-medium shade
Nubifer R-5540 Bluish-medium shade
Nubifer R-5560 Bluish-medium shade
Nubifer R-5580C The most bluishdarkest shade
Excellent dimensional stability no warping no shrinkage
Opaque to visible light
Suitable for Polyolefins PS ABS Engineering Polymers (depending on processing temperature) PVC and Rubber
Heat fastness 180o - 200o C 5 min SERIES Light fastness Fair
Weather fastness Fair Acid fastness Fair Alkali fastness Low Solvent fastness Excellent
CONVENTIONAL (L)
RESISTANT (RS) Heat fastness 240o - 260o C 5 min SERIES Light fastness High
Weather fastness High Acid fastness High Alkali fastness Low Solvent fastness Excellent
Nubiterm K SERIES Heat fastness 300o C 5 min Light fastness High Weather fastness High Acid fastness High Alkali fastness Low Solvent fastness Excellent
RECOMMENDED PRODUCTS NRC-36 Resistant scarlet shade Nubiterm NK-38 High heat fastness orange shade
NB Ferro has not requested the REACH authorization for the use of Molybdate Oranges in the European Union
bull bull
bull bull
bull bull
bull bull
bull bull
MAIN CHARACTERISTICS
CuCr2O4
Pigment Black 28 (CI 77428)
Spinel Structure
Bluish deep shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light NIR absorbent
MAIN CHARACTERISTICS
Cr2O3
Pigment Green 17 ( CI 77288)
Hematite structure
Brownish to bluish black shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with high NIR reflectance (ldquocoolrdquo pigment)
PG17 CHROMIUM
GREEN-BLACK HEMATITE
BLACK PBk28 COPPER CHROMITE BLACK SPINEL
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS V-7709 Standard grade V-7710 Standard grade
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineer-ing Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness Light fastness
Weather fastness Acid fastness Alkali fastness Solvent fastness
gt500oC 5 min Excellent (8 on blue wool scale) Excellent (5 on grey scale) Excellent Excellent Excellent
RECOMMENDED PRODUCTS V-772 Reddish shade V-775 The most bluish shade
V-774 High tinting strength bluish shade
bull bull
bull bull
bull bull
bull bull
bull bull
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with high NIR reflectance (ldquocoolrdquo pigment)
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
MAIN CHARACTERISTICS
(CrFe)2O3
Pigment Brown 29 (CI 77500)
Hematite structure
Brownish to bluish black shade
MAIN CHARACTERISTICS MANGANESE CHROME IRON
Ease of dispersion
MnFe2O4
Pigment Black 26 (CI 77494)
Spinel structure
Very bluishdeep shade the strongest black CICP
Ease of dispersion
SPINEL
PBk26 FERRITE BLACK BROWN
PBr29
HEMATITE
BLACK
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS 10466 Reddish shade V-780 Strong reddish shade
V-760 Yellowish shade V-781 Strong reddish shade
V-778 Yellowish shade V-785 The most bluish shade
V-778-2 Yellow reddish shade V-10121-2 Dark brown
Excellent dimensional stability no warping no shrinkage
Opaque to visible light UVNIR absorbent
The black CICP with the highest heat fastness
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness gt500oC 5 min Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS F-6331-2 High tinting strength very bluish shade
bull bull
bull bull
bull
bull bull
bull
bull bull
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with moderate NIR reflectance (ldquocoolrdquo pigment)
Used when neither Carbon Black nor Black Iron Oxide can be used for technical reasons
PBk11 IRON OXIDE
BLACK
BLACK MAIN CHARACTERISTICS
MnFe2O
PBk33
4
Pigment Black 33 (CI 77537)
Hematite structure
Brownish to bluish black shade
Ease of dispersion
MANGANESE FERRITE BLACK OXIDE
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
Heat fastness 180oC 5 min Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS 24-3303 Reddish shade Nubifer NB-803K Bluish shade
MAIN CHARACTERISTICS
Fe3O4
Pigment Black 11 (CI 77499)
Magnetite structure
Bluish black shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light NIR absorbent
Suitable for low processing temperature Polyolefins PVC (just unplasticized compounds the more stabilized the PVC is the more suitable conventional Black Iron Oxides become) and Rubber
RECOMMENDED PRODUCTS Nubifer NB-5970 Micronized high tinting strength very bluish shade
COOL PIGMENTS MAIN CHARACTERISTICS
It is well known that under the sun dark surfaces become hot and white surfaces remain cooler When comparing a white plastic part containing TiO2 (Near Infrared -NIR- reflecting pigment) with a black plastic part containing Carbon Black (Near Infrared -NIR- absorbent pigment) the surface temperature difference can reach more than 30degC on a hot sunny day This common effect is not only related to color but also to NIR absorption of the pigments used in a particular application By using the appropriate pigments even dark surfaces can stay cool under the sun This type of pigments also referred to as Cool Pigments do not absorb the NIR portion of wavelengths coming from sunlight There are 2 types of Cool Pigments NIR reflecting pigments and NIR transparent pigments The final behavior of the latter will be influenced by the entire system therefore when using NIR transparent pigments it is recommended to use them in combination with NIR reflecting pigments or substrates Ferro Pigments has a full range of Cool Pigments and many years of experience developing projects in this field so we are the ideal partner to support you in your cool projects
MAIN APPLICATIONS AND BENEFITS APPLICATIONS
PVC applications eg siding window profiles
Agricultural film
Plastic roof tiles
Sport fields and synthetic turfartificial grass
Automotive applications eg dashboards steering wheels upholstery
Fiber applications eg garment carpets
Single ply roofing systems
Black coloration of plastics to be recycled by NIR sensor sorting systems
BENEFITS
Increased service life due to less thermal stress on the plastic parts
Reduced air conditioning and energy consumption
Increased comfort Increased Health and Safety
Increased protection against thermal degradation of goods packaged with ldquocoolrdquo plastics
Recycle black parts to create economical value and reduce waste disposal
Ferro offers a full range of Cool Pigments in the whole color spectrum
MAIN PRODUCTS
bull bull bull bull bull
bull
bull bullbullbull
bull
regFERRO Where innovation delivers performancetrade
COOL PIGMENTS FERRO COOL PIGMENTS COLOR SPACE
COOL PIGMENTS (High NIR Reflectance) PY53 Nickel Antimony Titanium
Yellow Rutile
PBr24 Chrome Antimony Titanium Buff Rutile
PY184 Bismuth Vanadate
PG17 Chromium Green-Black Hematite
PY184 PG17 Chrome Oxide Green
PBr29 Chrome Iron Brown Hematite
PY164 Manganese Antimony Titanium Buff Rutile
PBr24PY53
COOL PIGMENTS PBk12 (Moderate NIR Reflectance PY119 PR101or NIR transparency)
PG50 PG17 Transparent to NIR PY164
PG50 PG26Ni Free PBk12 Iron Titanium Brown Spinel PBr29 PB28 Cobalt Aluminate Blue PBk33PB28 PG17
Spinel Turquoise PB36 PB36 Cobalt Chromite Blue-Green Turquoise
Spinel
PBk33 Manganese Ferrite Black Oxide
PG26 Cobalt Chromite Green PV15 PB36 Spinel
PG50 Cobalt Titanate Green PB28 Spinel
PR101 Iron Oxide Red PB29PY119 Zinc Ferrite Brown Spinel
PB29 Ultramarine Blue
PV15 Ultramarine Violet
bull
bull
bull
bull
bull
bull
bull
bull
~
bull
bull
MAIN CHARACTERISTICS
PbCrO4
Pigment Yellow 34 (CI 77603)
Ease of dispersion
Opaque to visible light
PY34 CHROME YELLOW
YELLOW RECOMMENDED PRODUCTS AD-74 Conventional middle yellow Nubiterm AK-74 High heat fastness PbSO4 middle yellow AD-81 Conventional lemon yellow
Nubiterm AK-81 High heat fastness AL-90 Conventional primrose yellow Monoclinic to Rhombic structure depending on shade lemon yellow
Bright yellow shade (middle lemon and primrose) NB Ferro has not requested the REACH authorization for the use of Chrome Yellows in the European Union
Excellent dimensional stability no warping no shrinkage
Suitable for Polyolefins PS ABS Engineering Polymers (depending on processing temperature) PVC and Rubber
CONVENTIONAL (LD) Heat fastness 180oC 5 min SERIES Light fastness MiddleLemon = Fair Primrose = Low
Weather fastness MiddleLemon = Medium Primrose = Low
Acid fastness Fair Alkali fastness Low
Solvent fastness Excellent
RESISTANT (RS) SERIES Heat fastness 220-260oC 5 min
Light fastness MiddleLemon = High Primrose = Fair Weather fastness MiddleLemon = High Primrose = Fair Acid fastness High
Alkali fastness Low
Solvent fastness Excellent
Nubiterm K SERIES Heat fastness 300oC 5 min
Light fastness High
Weather fastness High Acid fastness High
Alkali fastness Low
Solvent fastness Excellent
bull
bull
bull bull
bull bull
bull bull
bull bull
bull
bull bull
BUFF PBr24 CHROME MAIN CHARACTERISTICS ANTIMONY
(TiCrSb) O2TITANIUM BUFF RUTILE Pigment Brown 24 (CI 77310)
Rutile structure
Clean buff shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with high NIR reflectance (ldquocoolrdquo pigment)
Possible replacement of Chrome Yellows in combination with Organics
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS 10406 Standard grade yellowish shade V-9118 Yellowish shade
10408 Standard grade reddish shade V-12112 High tinting strength reddish shade
10411 Strong greenish shade 10657 High tinting strength reddish blue
MAIN CHARACTERISTICS
FeOOH
Pigment Yellow 42 (CI 77492)
Goethite structure
Dull buff shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with low NIR reflectance
PY42 IRON OXIDE
YELLOW
Possible replacement of Chrome Yellows in combination with Organics
Good coloristics to combine with Organics and Inorganics to reach specific colors at very competitive cost eg natural greens bright reds chocolate browns light beiges
Conventional grades are suitable for low processing temperature Polyolefins PVC (just unplasticized compounds the more stabilized the PVC is the more suitable conventional Yellow Iron Oxides become) and Rubber Nubifer Y-7050 is suitable for medium processing temperature Polyolefins PS ABS PVC (plasticized and unplasticized compounds the more stabilized the PVC is the more suitable Nubifer Y-7050 becomes) and Rubber
Heat fastness 160oC 5 min except Nubifer Y-7050 (260oC 5 min)
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS Nubifer Y-5000 SERIES Nubifer Y-7000 SERIES The micronizedhigh dispersibilitynarrow The micronized higher heat fastness than colorimetric tolerance Yellow Iron Oxides conventional Yellow Iron Oxides
Nubifer Y-5010 Light shade Nubifer Y-7050 Encapsulated grade for medium processing Nubifer Y-5021 Reddish shade temperature resins (heat fastness = 260degC 5 min) and PVC (more suitable for unplasticized PVC compounds than conventional Yellow Iron Oxides)
bull
bull
bull
bull
bull
bull
bull
bull
PY119 ZINC FERRITE BROWN SPINEL
MAIN CHARACTERISTICS
ZnFe2O4
Pigment Yellow 119 (CI 77496)
Spinel structure
Reddish buff shade
Ease of dispersion
(ldquocoolrdquo pigment)
BUFFBUFFBUFF
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with moderate NIR reflectance
Possible replacement of Chrome Yellows in combination with Organics
Good coloristics to combine with Organics and Inorganics to reach specific colors at very competitive cost eg natural greens bright reds chocolate browns light beiges
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers PVC Silicones and Rubber
Heat fastness Nubifer Y-805K (300oC 5 min) Nubifer Y-905K (260oC 5 min)
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS Nubifer Y-805K 10520 Very high heat fastness spinel Very high heat fastness yellowish shade (300degC 5 min) dark reddish shade V-9117 Very high heat fastness spinel Nubifer Y-905K yellowish shade High heat fastness (260degC 5 min) light yellowish shade
bull
bull bull
bull bull
bull bull
bull bull
BBBUUUFFFFFF PY164 MANGANESE MAIN CHARACTERISTICS ANTIMONY
(TiMnSb) O2TITANIUM BUFF RUTILE Pigment Yellow 164 ( CI 77899)
Dark brown shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with high NIR reflectance (ldquocoolrdquo pigment)
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fast Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS 10550 Standard grade V-12100 Bluish shade
MAIN CHARACTERISTICS
Fe2TiO4
Pigment Black 12 (CI 77543)
Buff shade similar to PBr24 without containing Cr3+
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with moderate NIR reflectance (ldquocoolrdquo pigment)
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
PBk12 IRON
TITANIUM BROWN
SPINEL
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS 10358 Standard grade
bull
bull
bull bull
bull bull
- - -_middotmiddotmiddotmiddot - ---
~_ bullbullbullbull ------- - -~~
bull
bull
MAIN CHARACTERISTICS Fe2O3
Pigment Red 101 (CI 77491)
Hematite structure
Dull red shade
Ease of dispersion
MAIN CHARACTERISTICS PbCrO4PbSO4PbMoO4
Pigment Red 104 (CI 77605)
Tetragonal structure
Bright red shade (orange scarlet and red)
Ease of dispersion
PR104 MOLYBDATE
ORANGE
PR101 IRON OXIDE RED
RED
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with moderate NIR reflectance (ldquocoolrdquo pigment)
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC (plasticized and unplasticized compounds the more stabilized the PVC is the more suitable Red Iron Oxides become) Silicones and Rubber
Heat fastness 500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS Nubifer R-5500 SERIES
The micronizedhigh dispersibilitynarrow colorimetric tolerance Red Iron Oxides
Nubifer R-5501 Nubifer R-5510 Nubifer R-5520 Nubifer R-5530
The most yellowishlightest shade
Yellowish shade
Yellowish-medium shade
Yellowish-medium shade
Nubifer R-5540 Bluish-medium shade
Nubifer R-5560 Bluish-medium shade
Nubifer R-5580C The most bluishdarkest shade
Excellent dimensional stability no warping no shrinkage
Opaque to visible light
Suitable for Polyolefins PS ABS Engineering Polymers (depending on processing temperature) PVC and Rubber
Heat fastness 180o - 200o C 5 min SERIES Light fastness Fair
Weather fastness Fair Acid fastness Fair Alkali fastness Low Solvent fastness Excellent
CONVENTIONAL (L)
RESISTANT (RS) Heat fastness 240o - 260o C 5 min SERIES Light fastness High
Weather fastness High Acid fastness High Alkali fastness Low Solvent fastness Excellent
Nubiterm K SERIES Heat fastness 300o C 5 min Light fastness High Weather fastness High Acid fastness High Alkali fastness Low Solvent fastness Excellent
RECOMMENDED PRODUCTS NRC-36 Resistant scarlet shade Nubiterm NK-38 High heat fastness orange shade
NB Ferro has not requested the REACH authorization for the use of Molybdate Oranges in the European Union
bull bull
bull bull
bull bull
bull bull
bull bull
MAIN CHARACTERISTICS
CuCr2O4
Pigment Black 28 (CI 77428)
Spinel Structure
Bluish deep shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light NIR absorbent
MAIN CHARACTERISTICS
Cr2O3
Pigment Green 17 ( CI 77288)
Hematite structure
Brownish to bluish black shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with high NIR reflectance (ldquocoolrdquo pigment)
PG17 CHROMIUM
GREEN-BLACK HEMATITE
BLACK PBk28 COPPER CHROMITE BLACK SPINEL
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS V-7709 Standard grade V-7710 Standard grade
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineer-ing Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness Light fastness
Weather fastness Acid fastness Alkali fastness Solvent fastness
gt500oC 5 min Excellent (8 on blue wool scale) Excellent (5 on grey scale) Excellent Excellent Excellent
RECOMMENDED PRODUCTS V-772 Reddish shade V-775 The most bluish shade
V-774 High tinting strength bluish shade
bull bull
bull bull
bull bull
bull bull
bull bull
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with high NIR reflectance (ldquocoolrdquo pigment)
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
MAIN CHARACTERISTICS
(CrFe)2O3
Pigment Brown 29 (CI 77500)
Hematite structure
Brownish to bluish black shade
MAIN CHARACTERISTICS MANGANESE CHROME IRON
Ease of dispersion
MnFe2O4
Pigment Black 26 (CI 77494)
Spinel structure
Very bluishdeep shade the strongest black CICP
Ease of dispersion
SPINEL
PBk26 FERRITE BLACK BROWN
PBr29
HEMATITE
BLACK
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS 10466 Reddish shade V-780 Strong reddish shade
V-760 Yellowish shade V-781 Strong reddish shade
V-778 Yellowish shade V-785 The most bluish shade
V-778-2 Yellow reddish shade V-10121-2 Dark brown
Excellent dimensional stability no warping no shrinkage
Opaque to visible light UVNIR absorbent
The black CICP with the highest heat fastness
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness gt500oC 5 min Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS F-6331-2 High tinting strength very bluish shade
bull bull
bull bull
bull
bull bull
bull
bull bull
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with moderate NIR reflectance (ldquocoolrdquo pigment)
Used when neither Carbon Black nor Black Iron Oxide can be used for technical reasons
PBk11 IRON OXIDE
BLACK
BLACK MAIN CHARACTERISTICS
MnFe2O
PBk33
4
Pigment Black 33 (CI 77537)
Hematite structure
Brownish to bluish black shade
Ease of dispersion
MANGANESE FERRITE BLACK OXIDE
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
Heat fastness 180oC 5 min Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS 24-3303 Reddish shade Nubifer NB-803K Bluish shade
MAIN CHARACTERISTICS
Fe3O4
Pigment Black 11 (CI 77499)
Magnetite structure
Bluish black shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light NIR absorbent
Suitable for low processing temperature Polyolefins PVC (just unplasticized compounds the more stabilized the PVC is the more suitable conventional Black Iron Oxides become) and Rubber
RECOMMENDED PRODUCTS Nubifer NB-5970 Micronized high tinting strength very bluish shade
COOL PIGMENTS MAIN CHARACTERISTICS
It is well known that under the sun dark surfaces become hot and white surfaces remain cooler When comparing a white plastic part containing TiO2 (Near Infrared -NIR- reflecting pigment) with a black plastic part containing Carbon Black (Near Infrared -NIR- absorbent pigment) the surface temperature difference can reach more than 30degC on a hot sunny day This common effect is not only related to color but also to NIR absorption of the pigments used in a particular application By using the appropriate pigments even dark surfaces can stay cool under the sun This type of pigments also referred to as Cool Pigments do not absorb the NIR portion of wavelengths coming from sunlight There are 2 types of Cool Pigments NIR reflecting pigments and NIR transparent pigments The final behavior of the latter will be influenced by the entire system therefore when using NIR transparent pigments it is recommended to use them in combination with NIR reflecting pigments or substrates Ferro Pigments has a full range of Cool Pigments and many years of experience developing projects in this field so we are the ideal partner to support you in your cool projects
MAIN APPLICATIONS AND BENEFITS APPLICATIONS
PVC applications eg siding window profiles
Agricultural film
Plastic roof tiles
Sport fields and synthetic turfartificial grass
Automotive applications eg dashboards steering wheels upholstery
Fiber applications eg garment carpets
Single ply roofing systems
Black coloration of plastics to be recycled by NIR sensor sorting systems
BENEFITS
Increased service life due to less thermal stress on the plastic parts
Reduced air conditioning and energy consumption
Increased comfort Increased Health and Safety
Increased protection against thermal degradation of goods packaged with ldquocoolrdquo plastics
Recycle black parts to create economical value and reduce waste disposal
Ferro offers a full range of Cool Pigments in the whole color spectrum
MAIN PRODUCTS
bull bull bull bull bull
bull
bull bullbullbull
bull
regFERRO Where innovation delivers performancetrade
COOL PIGMENTS FERRO COOL PIGMENTS COLOR SPACE
COOL PIGMENTS (High NIR Reflectance) PY53 Nickel Antimony Titanium
Yellow Rutile
PBr24 Chrome Antimony Titanium Buff Rutile
PY184 Bismuth Vanadate
PG17 Chromium Green-Black Hematite
PY184 PG17 Chrome Oxide Green
PBr29 Chrome Iron Brown Hematite
PY164 Manganese Antimony Titanium Buff Rutile
PBr24PY53
COOL PIGMENTS PBk12 (Moderate NIR Reflectance PY119 PR101or NIR transparency)
PG50 PG17 Transparent to NIR PY164
PG50 PG26Ni Free PBk12 Iron Titanium Brown Spinel PBr29 PB28 Cobalt Aluminate Blue PBk33PB28 PG17
Spinel Turquoise PB36 PB36 Cobalt Chromite Blue-Green Turquoise
Spinel
PBk33 Manganese Ferrite Black Oxide
PG26 Cobalt Chromite Green PV15 PB36 Spinel
PG50 Cobalt Titanate Green PB28 Spinel
PR101 Iron Oxide Red PB29PY119 Zinc Ferrite Brown Spinel
PB29 Ultramarine Blue
PV15 Ultramarine Violet
bull
bull
bull bull
bull bull
bull bull
bull bull
bull
bull bull
BUFF PBr24 CHROME MAIN CHARACTERISTICS ANTIMONY
(TiCrSb) O2TITANIUM BUFF RUTILE Pigment Brown 24 (CI 77310)
Rutile structure
Clean buff shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with high NIR reflectance (ldquocoolrdquo pigment)
Possible replacement of Chrome Yellows in combination with Organics
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS 10406 Standard grade yellowish shade V-9118 Yellowish shade
10408 Standard grade reddish shade V-12112 High tinting strength reddish shade
10411 Strong greenish shade 10657 High tinting strength reddish blue
MAIN CHARACTERISTICS
FeOOH
Pigment Yellow 42 (CI 77492)
Goethite structure
Dull buff shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with low NIR reflectance
PY42 IRON OXIDE
YELLOW
Possible replacement of Chrome Yellows in combination with Organics
Good coloristics to combine with Organics and Inorganics to reach specific colors at very competitive cost eg natural greens bright reds chocolate browns light beiges
Conventional grades are suitable for low processing temperature Polyolefins PVC (just unplasticized compounds the more stabilized the PVC is the more suitable conventional Yellow Iron Oxides become) and Rubber Nubifer Y-7050 is suitable for medium processing temperature Polyolefins PS ABS PVC (plasticized and unplasticized compounds the more stabilized the PVC is the more suitable Nubifer Y-7050 becomes) and Rubber
Heat fastness 160oC 5 min except Nubifer Y-7050 (260oC 5 min)
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS Nubifer Y-5000 SERIES Nubifer Y-7000 SERIES The micronizedhigh dispersibilitynarrow The micronized higher heat fastness than colorimetric tolerance Yellow Iron Oxides conventional Yellow Iron Oxides
Nubifer Y-5010 Light shade Nubifer Y-7050 Encapsulated grade for medium processing Nubifer Y-5021 Reddish shade temperature resins (heat fastness = 260degC 5 min) and PVC (more suitable for unplasticized PVC compounds than conventional Yellow Iron Oxides)
bull
bull
bull
bull
bull
bull
bull
bull
PY119 ZINC FERRITE BROWN SPINEL
MAIN CHARACTERISTICS
ZnFe2O4
Pigment Yellow 119 (CI 77496)
Spinel structure
Reddish buff shade
Ease of dispersion
(ldquocoolrdquo pigment)
BUFFBUFFBUFF
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with moderate NIR reflectance
Possible replacement of Chrome Yellows in combination with Organics
Good coloristics to combine with Organics and Inorganics to reach specific colors at very competitive cost eg natural greens bright reds chocolate browns light beiges
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers PVC Silicones and Rubber
Heat fastness Nubifer Y-805K (300oC 5 min) Nubifer Y-905K (260oC 5 min)
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS Nubifer Y-805K 10520 Very high heat fastness spinel Very high heat fastness yellowish shade (300degC 5 min) dark reddish shade V-9117 Very high heat fastness spinel Nubifer Y-905K yellowish shade High heat fastness (260degC 5 min) light yellowish shade
bull
bull bull
bull bull
bull bull
bull bull
BBBUUUFFFFFF PY164 MANGANESE MAIN CHARACTERISTICS ANTIMONY
(TiMnSb) O2TITANIUM BUFF RUTILE Pigment Yellow 164 ( CI 77899)
Dark brown shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with high NIR reflectance (ldquocoolrdquo pigment)
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fast Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS 10550 Standard grade V-12100 Bluish shade
MAIN CHARACTERISTICS
Fe2TiO4
Pigment Black 12 (CI 77543)
Buff shade similar to PBr24 without containing Cr3+
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with moderate NIR reflectance (ldquocoolrdquo pigment)
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
PBk12 IRON
TITANIUM BROWN
SPINEL
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS 10358 Standard grade
bull
bull
bull bull
bull bull
- - -_middotmiddotmiddotmiddot - ---
~_ bullbullbullbull ------- - -~~
bull
bull
MAIN CHARACTERISTICS Fe2O3
Pigment Red 101 (CI 77491)
Hematite structure
Dull red shade
Ease of dispersion
MAIN CHARACTERISTICS PbCrO4PbSO4PbMoO4
Pigment Red 104 (CI 77605)
Tetragonal structure
Bright red shade (orange scarlet and red)
Ease of dispersion
PR104 MOLYBDATE
ORANGE
PR101 IRON OXIDE RED
RED
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with moderate NIR reflectance (ldquocoolrdquo pigment)
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC (plasticized and unplasticized compounds the more stabilized the PVC is the more suitable Red Iron Oxides become) Silicones and Rubber
Heat fastness 500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS Nubifer R-5500 SERIES
The micronizedhigh dispersibilitynarrow colorimetric tolerance Red Iron Oxides
Nubifer R-5501 Nubifer R-5510 Nubifer R-5520 Nubifer R-5530
The most yellowishlightest shade
Yellowish shade
Yellowish-medium shade
Yellowish-medium shade
Nubifer R-5540 Bluish-medium shade
Nubifer R-5560 Bluish-medium shade
Nubifer R-5580C The most bluishdarkest shade
Excellent dimensional stability no warping no shrinkage
Opaque to visible light
Suitable for Polyolefins PS ABS Engineering Polymers (depending on processing temperature) PVC and Rubber
Heat fastness 180o - 200o C 5 min SERIES Light fastness Fair
Weather fastness Fair Acid fastness Fair Alkali fastness Low Solvent fastness Excellent
CONVENTIONAL (L)
RESISTANT (RS) Heat fastness 240o - 260o C 5 min SERIES Light fastness High
Weather fastness High Acid fastness High Alkali fastness Low Solvent fastness Excellent
Nubiterm K SERIES Heat fastness 300o C 5 min Light fastness High Weather fastness High Acid fastness High Alkali fastness Low Solvent fastness Excellent
RECOMMENDED PRODUCTS NRC-36 Resistant scarlet shade Nubiterm NK-38 High heat fastness orange shade
NB Ferro has not requested the REACH authorization for the use of Molybdate Oranges in the European Union
bull bull
bull bull
bull bull
bull bull
bull bull
MAIN CHARACTERISTICS
CuCr2O4
Pigment Black 28 (CI 77428)
Spinel Structure
Bluish deep shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light NIR absorbent
MAIN CHARACTERISTICS
Cr2O3
Pigment Green 17 ( CI 77288)
Hematite structure
Brownish to bluish black shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with high NIR reflectance (ldquocoolrdquo pigment)
PG17 CHROMIUM
GREEN-BLACK HEMATITE
BLACK PBk28 COPPER CHROMITE BLACK SPINEL
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS V-7709 Standard grade V-7710 Standard grade
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineer-ing Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness Light fastness
Weather fastness Acid fastness Alkali fastness Solvent fastness
gt500oC 5 min Excellent (8 on blue wool scale) Excellent (5 on grey scale) Excellent Excellent Excellent
RECOMMENDED PRODUCTS V-772 Reddish shade V-775 The most bluish shade
V-774 High tinting strength bluish shade
bull bull
bull bull
bull bull
bull bull
bull bull
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with high NIR reflectance (ldquocoolrdquo pigment)
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
MAIN CHARACTERISTICS
(CrFe)2O3
Pigment Brown 29 (CI 77500)
Hematite structure
Brownish to bluish black shade
MAIN CHARACTERISTICS MANGANESE CHROME IRON
Ease of dispersion
MnFe2O4
Pigment Black 26 (CI 77494)
Spinel structure
Very bluishdeep shade the strongest black CICP
Ease of dispersion
SPINEL
PBk26 FERRITE BLACK BROWN
PBr29
HEMATITE
BLACK
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS 10466 Reddish shade V-780 Strong reddish shade
V-760 Yellowish shade V-781 Strong reddish shade
V-778 Yellowish shade V-785 The most bluish shade
V-778-2 Yellow reddish shade V-10121-2 Dark brown
Excellent dimensional stability no warping no shrinkage
Opaque to visible light UVNIR absorbent
The black CICP with the highest heat fastness
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness gt500oC 5 min Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS F-6331-2 High tinting strength very bluish shade
bull bull
bull bull
bull
bull bull
bull
bull bull
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with moderate NIR reflectance (ldquocoolrdquo pigment)
Used when neither Carbon Black nor Black Iron Oxide can be used for technical reasons
PBk11 IRON OXIDE
BLACK
BLACK MAIN CHARACTERISTICS
MnFe2O
PBk33
4
Pigment Black 33 (CI 77537)
Hematite structure
Brownish to bluish black shade
Ease of dispersion
MANGANESE FERRITE BLACK OXIDE
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
Heat fastness 180oC 5 min Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS 24-3303 Reddish shade Nubifer NB-803K Bluish shade
MAIN CHARACTERISTICS
Fe3O4
Pigment Black 11 (CI 77499)
Magnetite structure
Bluish black shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light NIR absorbent
Suitable for low processing temperature Polyolefins PVC (just unplasticized compounds the more stabilized the PVC is the more suitable conventional Black Iron Oxides become) and Rubber
RECOMMENDED PRODUCTS Nubifer NB-5970 Micronized high tinting strength very bluish shade
COOL PIGMENTS MAIN CHARACTERISTICS
It is well known that under the sun dark surfaces become hot and white surfaces remain cooler When comparing a white plastic part containing TiO2 (Near Infrared -NIR- reflecting pigment) with a black plastic part containing Carbon Black (Near Infrared -NIR- absorbent pigment) the surface temperature difference can reach more than 30degC on a hot sunny day This common effect is not only related to color but also to NIR absorption of the pigments used in a particular application By using the appropriate pigments even dark surfaces can stay cool under the sun This type of pigments also referred to as Cool Pigments do not absorb the NIR portion of wavelengths coming from sunlight There are 2 types of Cool Pigments NIR reflecting pigments and NIR transparent pigments The final behavior of the latter will be influenced by the entire system therefore when using NIR transparent pigments it is recommended to use them in combination with NIR reflecting pigments or substrates Ferro Pigments has a full range of Cool Pigments and many years of experience developing projects in this field so we are the ideal partner to support you in your cool projects
MAIN APPLICATIONS AND BENEFITS APPLICATIONS
PVC applications eg siding window profiles
Agricultural film
Plastic roof tiles
Sport fields and synthetic turfartificial grass
Automotive applications eg dashboards steering wheels upholstery
Fiber applications eg garment carpets
Single ply roofing systems
Black coloration of plastics to be recycled by NIR sensor sorting systems
BENEFITS
Increased service life due to less thermal stress on the plastic parts
Reduced air conditioning and energy consumption
Increased comfort Increased Health and Safety
Increased protection against thermal degradation of goods packaged with ldquocoolrdquo plastics
Recycle black parts to create economical value and reduce waste disposal
Ferro offers a full range of Cool Pigments in the whole color spectrum
MAIN PRODUCTS
bull bull bull bull bull
bull
bull bullbullbull
bull
regFERRO Where innovation delivers performancetrade
COOL PIGMENTS FERRO COOL PIGMENTS COLOR SPACE
COOL PIGMENTS (High NIR Reflectance) PY53 Nickel Antimony Titanium
Yellow Rutile
PBr24 Chrome Antimony Titanium Buff Rutile
PY184 Bismuth Vanadate
PG17 Chromium Green-Black Hematite
PY184 PG17 Chrome Oxide Green
PBr29 Chrome Iron Brown Hematite
PY164 Manganese Antimony Titanium Buff Rutile
PBr24PY53
COOL PIGMENTS PBk12 (Moderate NIR Reflectance PY119 PR101or NIR transparency)
PG50 PG17 Transparent to NIR PY164
PG50 PG26Ni Free PBk12 Iron Titanium Brown Spinel PBr29 PB28 Cobalt Aluminate Blue PBk33PB28 PG17
Spinel Turquoise PB36 PB36 Cobalt Chromite Blue-Green Turquoise
Spinel
PBk33 Manganese Ferrite Black Oxide
PG26 Cobalt Chromite Green PV15 PB36 Spinel
PG50 Cobalt Titanate Green PB28 Spinel
PR101 Iron Oxide Red PB29PY119 Zinc Ferrite Brown Spinel
PB29 Ultramarine Blue
PV15 Ultramarine Violet
bull
bull
bull
bull
bull
bull
bull
bull
PY119 ZINC FERRITE BROWN SPINEL
MAIN CHARACTERISTICS
ZnFe2O4
Pigment Yellow 119 (CI 77496)
Spinel structure
Reddish buff shade
Ease of dispersion
(ldquocoolrdquo pigment)
BUFFBUFFBUFF
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with moderate NIR reflectance
Possible replacement of Chrome Yellows in combination with Organics
Good coloristics to combine with Organics and Inorganics to reach specific colors at very competitive cost eg natural greens bright reds chocolate browns light beiges
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers PVC Silicones and Rubber
Heat fastness Nubifer Y-805K (300oC 5 min) Nubifer Y-905K (260oC 5 min)
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS Nubifer Y-805K 10520 Very high heat fastness spinel Very high heat fastness yellowish shade (300degC 5 min) dark reddish shade V-9117 Very high heat fastness spinel Nubifer Y-905K yellowish shade High heat fastness (260degC 5 min) light yellowish shade
bull
bull bull
bull bull
bull bull
bull bull
BBBUUUFFFFFF PY164 MANGANESE MAIN CHARACTERISTICS ANTIMONY
(TiMnSb) O2TITANIUM BUFF RUTILE Pigment Yellow 164 ( CI 77899)
Dark brown shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with high NIR reflectance (ldquocoolrdquo pigment)
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fast Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS 10550 Standard grade V-12100 Bluish shade
MAIN CHARACTERISTICS
Fe2TiO4
Pigment Black 12 (CI 77543)
Buff shade similar to PBr24 without containing Cr3+
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with moderate NIR reflectance (ldquocoolrdquo pigment)
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
PBk12 IRON
TITANIUM BROWN
SPINEL
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS 10358 Standard grade
bull
bull
bull bull
bull bull
- - -_middotmiddotmiddotmiddot - ---
~_ bullbullbullbull ------- - -~~
bull
bull
MAIN CHARACTERISTICS Fe2O3
Pigment Red 101 (CI 77491)
Hematite structure
Dull red shade
Ease of dispersion
MAIN CHARACTERISTICS PbCrO4PbSO4PbMoO4
Pigment Red 104 (CI 77605)
Tetragonal structure
Bright red shade (orange scarlet and red)
Ease of dispersion
PR104 MOLYBDATE
ORANGE
PR101 IRON OXIDE RED
RED
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with moderate NIR reflectance (ldquocoolrdquo pigment)
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC (plasticized and unplasticized compounds the more stabilized the PVC is the more suitable Red Iron Oxides become) Silicones and Rubber
Heat fastness 500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS Nubifer R-5500 SERIES
The micronizedhigh dispersibilitynarrow colorimetric tolerance Red Iron Oxides
Nubifer R-5501 Nubifer R-5510 Nubifer R-5520 Nubifer R-5530
The most yellowishlightest shade
Yellowish shade
Yellowish-medium shade
Yellowish-medium shade
Nubifer R-5540 Bluish-medium shade
Nubifer R-5560 Bluish-medium shade
Nubifer R-5580C The most bluishdarkest shade
Excellent dimensional stability no warping no shrinkage
Opaque to visible light
Suitable for Polyolefins PS ABS Engineering Polymers (depending on processing temperature) PVC and Rubber
Heat fastness 180o - 200o C 5 min SERIES Light fastness Fair
Weather fastness Fair Acid fastness Fair Alkali fastness Low Solvent fastness Excellent
CONVENTIONAL (L)
RESISTANT (RS) Heat fastness 240o - 260o C 5 min SERIES Light fastness High
Weather fastness High Acid fastness High Alkali fastness Low Solvent fastness Excellent
Nubiterm K SERIES Heat fastness 300o C 5 min Light fastness High Weather fastness High Acid fastness High Alkali fastness Low Solvent fastness Excellent
RECOMMENDED PRODUCTS NRC-36 Resistant scarlet shade Nubiterm NK-38 High heat fastness orange shade
NB Ferro has not requested the REACH authorization for the use of Molybdate Oranges in the European Union
bull bull
bull bull
bull bull
bull bull
bull bull
MAIN CHARACTERISTICS
CuCr2O4
Pigment Black 28 (CI 77428)
Spinel Structure
Bluish deep shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light NIR absorbent
MAIN CHARACTERISTICS
Cr2O3
Pigment Green 17 ( CI 77288)
Hematite structure
Brownish to bluish black shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with high NIR reflectance (ldquocoolrdquo pigment)
PG17 CHROMIUM
GREEN-BLACK HEMATITE
BLACK PBk28 COPPER CHROMITE BLACK SPINEL
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS V-7709 Standard grade V-7710 Standard grade
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineer-ing Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness Light fastness
Weather fastness Acid fastness Alkali fastness Solvent fastness
gt500oC 5 min Excellent (8 on blue wool scale) Excellent (5 on grey scale) Excellent Excellent Excellent
RECOMMENDED PRODUCTS V-772 Reddish shade V-775 The most bluish shade
V-774 High tinting strength bluish shade
bull bull
bull bull
bull bull
bull bull
bull bull
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with high NIR reflectance (ldquocoolrdquo pigment)
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
MAIN CHARACTERISTICS
(CrFe)2O3
Pigment Brown 29 (CI 77500)
Hematite structure
Brownish to bluish black shade
MAIN CHARACTERISTICS MANGANESE CHROME IRON
Ease of dispersion
MnFe2O4
Pigment Black 26 (CI 77494)
Spinel structure
Very bluishdeep shade the strongest black CICP
Ease of dispersion
SPINEL
PBk26 FERRITE BLACK BROWN
PBr29
HEMATITE
BLACK
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS 10466 Reddish shade V-780 Strong reddish shade
V-760 Yellowish shade V-781 Strong reddish shade
V-778 Yellowish shade V-785 The most bluish shade
V-778-2 Yellow reddish shade V-10121-2 Dark brown
Excellent dimensional stability no warping no shrinkage
Opaque to visible light UVNIR absorbent
The black CICP with the highest heat fastness
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness gt500oC 5 min Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS F-6331-2 High tinting strength very bluish shade
bull bull
bull bull
bull
bull bull
bull
bull bull
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with moderate NIR reflectance (ldquocoolrdquo pigment)
Used when neither Carbon Black nor Black Iron Oxide can be used for technical reasons
PBk11 IRON OXIDE
BLACK
BLACK MAIN CHARACTERISTICS
MnFe2O
PBk33
4
Pigment Black 33 (CI 77537)
Hematite structure
Brownish to bluish black shade
Ease of dispersion
MANGANESE FERRITE BLACK OXIDE
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
Heat fastness 180oC 5 min Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS 24-3303 Reddish shade Nubifer NB-803K Bluish shade
MAIN CHARACTERISTICS
Fe3O4
Pigment Black 11 (CI 77499)
Magnetite structure
Bluish black shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light NIR absorbent
Suitable for low processing temperature Polyolefins PVC (just unplasticized compounds the more stabilized the PVC is the more suitable conventional Black Iron Oxides become) and Rubber
RECOMMENDED PRODUCTS Nubifer NB-5970 Micronized high tinting strength very bluish shade
COOL PIGMENTS MAIN CHARACTERISTICS
It is well known that under the sun dark surfaces become hot and white surfaces remain cooler When comparing a white plastic part containing TiO2 (Near Infrared -NIR- reflecting pigment) with a black plastic part containing Carbon Black (Near Infrared -NIR- absorbent pigment) the surface temperature difference can reach more than 30degC on a hot sunny day This common effect is not only related to color but also to NIR absorption of the pigments used in a particular application By using the appropriate pigments even dark surfaces can stay cool under the sun This type of pigments also referred to as Cool Pigments do not absorb the NIR portion of wavelengths coming from sunlight There are 2 types of Cool Pigments NIR reflecting pigments and NIR transparent pigments The final behavior of the latter will be influenced by the entire system therefore when using NIR transparent pigments it is recommended to use them in combination with NIR reflecting pigments or substrates Ferro Pigments has a full range of Cool Pigments and many years of experience developing projects in this field so we are the ideal partner to support you in your cool projects
MAIN APPLICATIONS AND BENEFITS APPLICATIONS
PVC applications eg siding window profiles
Agricultural film
Plastic roof tiles
Sport fields and synthetic turfartificial grass
Automotive applications eg dashboards steering wheels upholstery
Fiber applications eg garment carpets
Single ply roofing systems
Black coloration of plastics to be recycled by NIR sensor sorting systems
BENEFITS
Increased service life due to less thermal stress on the plastic parts
Reduced air conditioning and energy consumption
Increased comfort Increased Health and Safety
Increased protection against thermal degradation of goods packaged with ldquocoolrdquo plastics
Recycle black parts to create economical value and reduce waste disposal
Ferro offers a full range of Cool Pigments in the whole color spectrum
MAIN PRODUCTS
bull bull bull bull bull
bull
bull bullbullbull
bull
regFERRO Where innovation delivers performancetrade
COOL PIGMENTS FERRO COOL PIGMENTS COLOR SPACE
COOL PIGMENTS (High NIR Reflectance) PY53 Nickel Antimony Titanium
Yellow Rutile
PBr24 Chrome Antimony Titanium Buff Rutile
PY184 Bismuth Vanadate
PG17 Chromium Green-Black Hematite
PY184 PG17 Chrome Oxide Green
PBr29 Chrome Iron Brown Hematite
PY164 Manganese Antimony Titanium Buff Rutile
PBr24PY53
COOL PIGMENTS PBk12 (Moderate NIR Reflectance PY119 PR101or NIR transparency)
PG50 PG17 Transparent to NIR PY164
PG50 PG26Ni Free PBk12 Iron Titanium Brown Spinel PBr29 PB28 Cobalt Aluminate Blue PBk33PB28 PG17
Spinel Turquoise PB36 PB36 Cobalt Chromite Blue-Green Turquoise
Spinel
PBk33 Manganese Ferrite Black Oxide
PG26 Cobalt Chromite Green PV15 PB36 Spinel
PG50 Cobalt Titanate Green PB28 Spinel
PR101 Iron Oxide Red PB29PY119 Zinc Ferrite Brown Spinel
PB29 Ultramarine Blue
PV15 Ultramarine Violet
bull
bull bull
bull bull
bull bull
bull bull
BBBUUUFFFFFF PY164 MANGANESE MAIN CHARACTERISTICS ANTIMONY
(TiMnSb) O2TITANIUM BUFF RUTILE Pigment Yellow 164 ( CI 77899)
Dark brown shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with high NIR reflectance (ldquocoolrdquo pigment)
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fast Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS 10550 Standard grade V-12100 Bluish shade
MAIN CHARACTERISTICS
Fe2TiO4
Pigment Black 12 (CI 77543)
Buff shade similar to PBr24 without containing Cr3+
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with moderate NIR reflectance (ldquocoolrdquo pigment)
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
PBk12 IRON
TITANIUM BROWN
SPINEL
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS 10358 Standard grade
bull
bull
bull bull
bull bull
- - -_middotmiddotmiddotmiddot - ---
~_ bullbullbullbull ------- - -~~
bull
bull
MAIN CHARACTERISTICS Fe2O3
Pigment Red 101 (CI 77491)
Hematite structure
Dull red shade
Ease of dispersion
MAIN CHARACTERISTICS PbCrO4PbSO4PbMoO4
Pigment Red 104 (CI 77605)
Tetragonal structure
Bright red shade (orange scarlet and red)
Ease of dispersion
PR104 MOLYBDATE
ORANGE
PR101 IRON OXIDE RED
RED
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with moderate NIR reflectance (ldquocoolrdquo pigment)
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC (plasticized and unplasticized compounds the more stabilized the PVC is the more suitable Red Iron Oxides become) Silicones and Rubber
Heat fastness 500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS Nubifer R-5500 SERIES
The micronizedhigh dispersibilitynarrow colorimetric tolerance Red Iron Oxides
Nubifer R-5501 Nubifer R-5510 Nubifer R-5520 Nubifer R-5530
The most yellowishlightest shade
Yellowish shade
Yellowish-medium shade
Yellowish-medium shade
Nubifer R-5540 Bluish-medium shade
Nubifer R-5560 Bluish-medium shade
Nubifer R-5580C The most bluishdarkest shade
Excellent dimensional stability no warping no shrinkage
Opaque to visible light
Suitable for Polyolefins PS ABS Engineering Polymers (depending on processing temperature) PVC and Rubber
Heat fastness 180o - 200o C 5 min SERIES Light fastness Fair
Weather fastness Fair Acid fastness Fair Alkali fastness Low Solvent fastness Excellent
CONVENTIONAL (L)
RESISTANT (RS) Heat fastness 240o - 260o C 5 min SERIES Light fastness High
Weather fastness High Acid fastness High Alkali fastness Low Solvent fastness Excellent
Nubiterm K SERIES Heat fastness 300o C 5 min Light fastness High Weather fastness High Acid fastness High Alkali fastness Low Solvent fastness Excellent
RECOMMENDED PRODUCTS NRC-36 Resistant scarlet shade Nubiterm NK-38 High heat fastness orange shade
NB Ferro has not requested the REACH authorization for the use of Molybdate Oranges in the European Union
bull bull
bull bull
bull bull
bull bull
bull bull
MAIN CHARACTERISTICS
CuCr2O4
Pigment Black 28 (CI 77428)
Spinel Structure
Bluish deep shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light NIR absorbent
MAIN CHARACTERISTICS
Cr2O3
Pigment Green 17 ( CI 77288)
Hematite structure
Brownish to bluish black shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with high NIR reflectance (ldquocoolrdquo pigment)
PG17 CHROMIUM
GREEN-BLACK HEMATITE
BLACK PBk28 COPPER CHROMITE BLACK SPINEL
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS V-7709 Standard grade V-7710 Standard grade
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineer-ing Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness Light fastness
Weather fastness Acid fastness Alkali fastness Solvent fastness
gt500oC 5 min Excellent (8 on blue wool scale) Excellent (5 on grey scale) Excellent Excellent Excellent
RECOMMENDED PRODUCTS V-772 Reddish shade V-775 The most bluish shade
V-774 High tinting strength bluish shade
bull bull
bull bull
bull bull
bull bull
bull bull
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with high NIR reflectance (ldquocoolrdquo pigment)
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
MAIN CHARACTERISTICS
(CrFe)2O3
Pigment Brown 29 (CI 77500)
Hematite structure
Brownish to bluish black shade
MAIN CHARACTERISTICS MANGANESE CHROME IRON
Ease of dispersion
MnFe2O4
Pigment Black 26 (CI 77494)
Spinel structure
Very bluishdeep shade the strongest black CICP
Ease of dispersion
SPINEL
PBk26 FERRITE BLACK BROWN
PBr29
HEMATITE
BLACK
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS 10466 Reddish shade V-780 Strong reddish shade
V-760 Yellowish shade V-781 Strong reddish shade
V-778 Yellowish shade V-785 The most bluish shade
V-778-2 Yellow reddish shade V-10121-2 Dark brown
Excellent dimensional stability no warping no shrinkage
Opaque to visible light UVNIR absorbent
The black CICP with the highest heat fastness
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness gt500oC 5 min Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS F-6331-2 High tinting strength very bluish shade
bull bull
bull bull
bull
bull bull
bull
bull bull
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with moderate NIR reflectance (ldquocoolrdquo pigment)
Used when neither Carbon Black nor Black Iron Oxide can be used for technical reasons
PBk11 IRON OXIDE
BLACK
BLACK MAIN CHARACTERISTICS
MnFe2O
PBk33
4
Pigment Black 33 (CI 77537)
Hematite structure
Brownish to bluish black shade
Ease of dispersion
MANGANESE FERRITE BLACK OXIDE
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
Heat fastness 180oC 5 min Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS 24-3303 Reddish shade Nubifer NB-803K Bluish shade
MAIN CHARACTERISTICS
Fe3O4
Pigment Black 11 (CI 77499)
Magnetite structure
Bluish black shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light NIR absorbent
Suitable for low processing temperature Polyolefins PVC (just unplasticized compounds the more stabilized the PVC is the more suitable conventional Black Iron Oxides become) and Rubber
RECOMMENDED PRODUCTS Nubifer NB-5970 Micronized high tinting strength very bluish shade
COOL PIGMENTS MAIN CHARACTERISTICS
It is well known that under the sun dark surfaces become hot and white surfaces remain cooler When comparing a white plastic part containing TiO2 (Near Infrared -NIR- reflecting pigment) with a black plastic part containing Carbon Black (Near Infrared -NIR- absorbent pigment) the surface temperature difference can reach more than 30degC on a hot sunny day This common effect is not only related to color but also to NIR absorption of the pigments used in a particular application By using the appropriate pigments even dark surfaces can stay cool under the sun This type of pigments also referred to as Cool Pigments do not absorb the NIR portion of wavelengths coming from sunlight There are 2 types of Cool Pigments NIR reflecting pigments and NIR transparent pigments The final behavior of the latter will be influenced by the entire system therefore when using NIR transparent pigments it is recommended to use them in combination with NIR reflecting pigments or substrates Ferro Pigments has a full range of Cool Pigments and many years of experience developing projects in this field so we are the ideal partner to support you in your cool projects
MAIN APPLICATIONS AND BENEFITS APPLICATIONS
PVC applications eg siding window profiles
Agricultural film
Plastic roof tiles
Sport fields and synthetic turfartificial grass
Automotive applications eg dashboards steering wheels upholstery
Fiber applications eg garment carpets
Single ply roofing systems
Black coloration of plastics to be recycled by NIR sensor sorting systems
BENEFITS
Increased service life due to less thermal stress on the plastic parts
Reduced air conditioning and energy consumption
Increased comfort Increased Health and Safety
Increased protection against thermal degradation of goods packaged with ldquocoolrdquo plastics
Recycle black parts to create economical value and reduce waste disposal
Ferro offers a full range of Cool Pigments in the whole color spectrum
MAIN PRODUCTS
bull bull bull bull bull
bull
bull bullbullbull
bull
regFERRO Where innovation delivers performancetrade
COOL PIGMENTS FERRO COOL PIGMENTS COLOR SPACE
COOL PIGMENTS (High NIR Reflectance) PY53 Nickel Antimony Titanium
Yellow Rutile
PBr24 Chrome Antimony Titanium Buff Rutile
PY184 Bismuth Vanadate
PG17 Chromium Green-Black Hematite
PY184 PG17 Chrome Oxide Green
PBr29 Chrome Iron Brown Hematite
PY164 Manganese Antimony Titanium Buff Rutile
PBr24PY53
COOL PIGMENTS PBk12 (Moderate NIR Reflectance PY119 PR101or NIR transparency)
PG50 PG17 Transparent to NIR PY164
PG50 PG26Ni Free PBk12 Iron Titanium Brown Spinel PBr29 PB28 Cobalt Aluminate Blue PBk33PB28 PG17
Spinel Turquoise PB36 PB36 Cobalt Chromite Blue-Green Turquoise
Spinel
PBk33 Manganese Ferrite Black Oxide
PG26 Cobalt Chromite Green PV15 PB36 Spinel
PG50 Cobalt Titanate Green PB28 Spinel
PR101 Iron Oxide Red PB29PY119 Zinc Ferrite Brown Spinel
PB29 Ultramarine Blue
PV15 Ultramarine Violet
bull
bull
bull bull
bull bull
- - -_middotmiddotmiddotmiddot - ---
~_ bullbullbullbull ------- - -~~
bull
bull
MAIN CHARACTERISTICS Fe2O3
Pigment Red 101 (CI 77491)
Hematite structure
Dull red shade
Ease of dispersion
MAIN CHARACTERISTICS PbCrO4PbSO4PbMoO4
Pigment Red 104 (CI 77605)
Tetragonal structure
Bright red shade (orange scarlet and red)
Ease of dispersion
PR104 MOLYBDATE
ORANGE
PR101 IRON OXIDE RED
RED
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with moderate NIR reflectance (ldquocoolrdquo pigment)
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC (plasticized and unplasticized compounds the more stabilized the PVC is the more suitable Red Iron Oxides become) Silicones and Rubber
Heat fastness 500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS Nubifer R-5500 SERIES
The micronizedhigh dispersibilitynarrow colorimetric tolerance Red Iron Oxides
Nubifer R-5501 Nubifer R-5510 Nubifer R-5520 Nubifer R-5530
The most yellowishlightest shade
Yellowish shade
Yellowish-medium shade
Yellowish-medium shade
Nubifer R-5540 Bluish-medium shade
Nubifer R-5560 Bluish-medium shade
Nubifer R-5580C The most bluishdarkest shade
Excellent dimensional stability no warping no shrinkage
Opaque to visible light
Suitable for Polyolefins PS ABS Engineering Polymers (depending on processing temperature) PVC and Rubber
Heat fastness 180o - 200o C 5 min SERIES Light fastness Fair
Weather fastness Fair Acid fastness Fair Alkali fastness Low Solvent fastness Excellent
CONVENTIONAL (L)
RESISTANT (RS) Heat fastness 240o - 260o C 5 min SERIES Light fastness High
Weather fastness High Acid fastness High Alkali fastness Low Solvent fastness Excellent
Nubiterm K SERIES Heat fastness 300o C 5 min Light fastness High Weather fastness High Acid fastness High Alkali fastness Low Solvent fastness Excellent
RECOMMENDED PRODUCTS NRC-36 Resistant scarlet shade Nubiterm NK-38 High heat fastness orange shade
NB Ferro has not requested the REACH authorization for the use of Molybdate Oranges in the European Union
bull bull
bull bull
bull bull
bull bull
bull bull
MAIN CHARACTERISTICS
CuCr2O4
Pigment Black 28 (CI 77428)
Spinel Structure
Bluish deep shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light NIR absorbent
MAIN CHARACTERISTICS
Cr2O3
Pigment Green 17 ( CI 77288)
Hematite structure
Brownish to bluish black shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with high NIR reflectance (ldquocoolrdquo pigment)
PG17 CHROMIUM
GREEN-BLACK HEMATITE
BLACK PBk28 COPPER CHROMITE BLACK SPINEL
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS V-7709 Standard grade V-7710 Standard grade
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineer-ing Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness Light fastness
Weather fastness Acid fastness Alkali fastness Solvent fastness
gt500oC 5 min Excellent (8 on blue wool scale) Excellent (5 on grey scale) Excellent Excellent Excellent
RECOMMENDED PRODUCTS V-772 Reddish shade V-775 The most bluish shade
V-774 High tinting strength bluish shade
bull bull
bull bull
bull bull
bull bull
bull bull
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with high NIR reflectance (ldquocoolrdquo pigment)
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
MAIN CHARACTERISTICS
(CrFe)2O3
Pigment Brown 29 (CI 77500)
Hematite structure
Brownish to bluish black shade
MAIN CHARACTERISTICS MANGANESE CHROME IRON
Ease of dispersion
MnFe2O4
Pigment Black 26 (CI 77494)
Spinel structure
Very bluishdeep shade the strongest black CICP
Ease of dispersion
SPINEL
PBk26 FERRITE BLACK BROWN
PBr29
HEMATITE
BLACK
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS 10466 Reddish shade V-780 Strong reddish shade
V-760 Yellowish shade V-781 Strong reddish shade
V-778 Yellowish shade V-785 The most bluish shade
V-778-2 Yellow reddish shade V-10121-2 Dark brown
Excellent dimensional stability no warping no shrinkage
Opaque to visible light UVNIR absorbent
The black CICP with the highest heat fastness
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness gt500oC 5 min Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS F-6331-2 High tinting strength very bluish shade
bull bull
bull bull
bull
bull bull
bull
bull bull
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with moderate NIR reflectance (ldquocoolrdquo pigment)
Used when neither Carbon Black nor Black Iron Oxide can be used for technical reasons
PBk11 IRON OXIDE
BLACK
BLACK MAIN CHARACTERISTICS
MnFe2O
PBk33
4
Pigment Black 33 (CI 77537)
Hematite structure
Brownish to bluish black shade
Ease of dispersion
MANGANESE FERRITE BLACK OXIDE
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
Heat fastness 180oC 5 min Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS 24-3303 Reddish shade Nubifer NB-803K Bluish shade
MAIN CHARACTERISTICS
Fe3O4
Pigment Black 11 (CI 77499)
Magnetite structure
Bluish black shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light NIR absorbent
Suitable for low processing temperature Polyolefins PVC (just unplasticized compounds the more stabilized the PVC is the more suitable conventional Black Iron Oxides become) and Rubber
RECOMMENDED PRODUCTS Nubifer NB-5970 Micronized high tinting strength very bluish shade
COOL PIGMENTS MAIN CHARACTERISTICS
It is well known that under the sun dark surfaces become hot and white surfaces remain cooler When comparing a white plastic part containing TiO2 (Near Infrared -NIR- reflecting pigment) with a black plastic part containing Carbon Black (Near Infrared -NIR- absorbent pigment) the surface temperature difference can reach more than 30degC on a hot sunny day This common effect is not only related to color but also to NIR absorption of the pigments used in a particular application By using the appropriate pigments even dark surfaces can stay cool under the sun This type of pigments also referred to as Cool Pigments do not absorb the NIR portion of wavelengths coming from sunlight There are 2 types of Cool Pigments NIR reflecting pigments and NIR transparent pigments The final behavior of the latter will be influenced by the entire system therefore when using NIR transparent pigments it is recommended to use them in combination with NIR reflecting pigments or substrates Ferro Pigments has a full range of Cool Pigments and many years of experience developing projects in this field so we are the ideal partner to support you in your cool projects
MAIN APPLICATIONS AND BENEFITS APPLICATIONS
PVC applications eg siding window profiles
Agricultural film
Plastic roof tiles
Sport fields and synthetic turfartificial grass
Automotive applications eg dashboards steering wheels upholstery
Fiber applications eg garment carpets
Single ply roofing systems
Black coloration of plastics to be recycled by NIR sensor sorting systems
BENEFITS
Increased service life due to less thermal stress on the plastic parts
Reduced air conditioning and energy consumption
Increased comfort Increased Health and Safety
Increased protection against thermal degradation of goods packaged with ldquocoolrdquo plastics
Recycle black parts to create economical value and reduce waste disposal
Ferro offers a full range of Cool Pigments in the whole color spectrum
MAIN PRODUCTS
bull bull bull bull bull
bull
bull bullbullbull
bull
regFERRO Where innovation delivers performancetrade
COOL PIGMENTS FERRO COOL PIGMENTS COLOR SPACE
COOL PIGMENTS (High NIR Reflectance) PY53 Nickel Antimony Titanium
Yellow Rutile
PBr24 Chrome Antimony Titanium Buff Rutile
PY184 Bismuth Vanadate
PG17 Chromium Green-Black Hematite
PY184 PG17 Chrome Oxide Green
PBr29 Chrome Iron Brown Hematite
PY164 Manganese Antimony Titanium Buff Rutile
PBr24PY53
COOL PIGMENTS PBk12 (Moderate NIR Reflectance PY119 PR101or NIR transparency)
PG50 PG17 Transparent to NIR PY164
PG50 PG26Ni Free PBk12 Iron Titanium Brown Spinel PBr29 PB28 Cobalt Aluminate Blue PBk33PB28 PG17
Spinel Turquoise PB36 PB36 Cobalt Chromite Blue-Green Turquoise
Spinel
PBk33 Manganese Ferrite Black Oxide
PG26 Cobalt Chromite Green PV15 PB36 Spinel
PG50 Cobalt Titanate Green PB28 Spinel
PR101 Iron Oxide Red PB29PY119 Zinc Ferrite Brown Spinel
PB29 Ultramarine Blue
PV15 Ultramarine Violet
bull bull
bull bull
bull bull
bull bull
bull bull
MAIN CHARACTERISTICS
CuCr2O4
Pigment Black 28 (CI 77428)
Spinel Structure
Bluish deep shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light NIR absorbent
MAIN CHARACTERISTICS
Cr2O3
Pigment Green 17 ( CI 77288)
Hematite structure
Brownish to bluish black shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with high NIR reflectance (ldquocoolrdquo pigment)
PG17 CHROMIUM
GREEN-BLACK HEMATITE
BLACK PBk28 COPPER CHROMITE BLACK SPINEL
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS V-7709 Standard grade V-7710 Standard grade
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineer-ing Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness Light fastness
Weather fastness Acid fastness Alkali fastness Solvent fastness
gt500oC 5 min Excellent (8 on blue wool scale) Excellent (5 on grey scale) Excellent Excellent Excellent
RECOMMENDED PRODUCTS V-772 Reddish shade V-775 The most bluish shade
V-774 High tinting strength bluish shade
bull bull
bull bull
bull bull
bull bull
bull bull
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with high NIR reflectance (ldquocoolrdquo pigment)
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
MAIN CHARACTERISTICS
(CrFe)2O3
Pigment Brown 29 (CI 77500)
Hematite structure
Brownish to bluish black shade
MAIN CHARACTERISTICS MANGANESE CHROME IRON
Ease of dispersion
MnFe2O4
Pigment Black 26 (CI 77494)
Spinel structure
Very bluishdeep shade the strongest black CICP
Ease of dispersion
SPINEL
PBk26 FERRITE BLACK BROWN
PBr29
HEMATITE
BLACK
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS 10466 Reddish shade V-780 Strong reddish shade
V-760 Yellowish shade V-781 Strong reddish shade
V-778 Yellowish shade V-785 The most bluish shade
V-778-2 Yellow reddish shade V-10121-2 Dark brown
Excellent dimensional stability no warping no shrinkage
Opaque to visible light UVNIR absorbent
The black CICP with the highest heat fastness
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness gt500oC 5 min Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS F-6331-2 High tinting strength very bluish shade
bull bull
bull bull
bull
bull bull
bull
bull bull
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with moderate NIR reflectance (ldquocoolrdquo pigment)
Used when neither Carbon Black nor Black Iron Oxide can be used for technical reasons
PBk11 IRON OXIDE
BLACK
BLACK MAIN CHARACTERISTICS
MnFe2O
PBk33
4
Pigment Black 33 (CI 77537)
Hematite structure
Brownish to bluish black shade
Ease of dispersion
MANGANESE FERRITE BLACK OXIDE
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
Heat fastness 180oC 5 min Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS 24-3303 Reddish shade Nubifer NB-803K Bluish shade
MAIN CHARACTERISTICS
Fe3O4
Pigment Black 11 (CI 77499)
Magnetite structure
Bluish black shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light NIR absorbent
Suitable for low processing temperature Polyolefins PVC (just unplasticized compounds the more stabilized the PVC is the more suitable conventional Black Iron Oxides become) and Rubber
RECOMMENDED PRODUCTS Nubifer NB-5970 Micronized high tinting strength very bluish shade
COOL PIGMENTS MAIN CHARACTERISTICS
It is well known that under the sun dark surfaces become hot and white surfaces remain cooler When comparing a white plastic part containing TiO2 (Near Infrared -NIR- reflecting pigment) with a black plastic part containing Carbon Black (Near Infrared -NIR- absorbent pigment) the surface temperature difference can reach more than 30degC on a hot sunny day This common effect is not only related to color but also to NIR absorption of the pigments used in a particular application By using the appropriate pigments even dark surfaces can stay cool under the sun This type of pigments also referred to as Cool Pigments do not absorb the NIR portion of wavelengths coming from sunlight There are 2 types of Cool Pigments NIR reflecting pigments and NIR transparent pigments The final behavior of the latter will be influenced by the entire system therefore when using NIR transparent pigments it is recommended to use them in combination with NIR reflecting pigments or substrates Ferro Pigments has a full range of Cool Pigments and many years of experience developing projects in this field so we are the ideal partner to support you in your cool projects
MAIN APPLICATIONS AND BENEFITS APPLICATIONS
PVC applications eg siding window profiles
Agricultural film
Plastic roof tiles
Sport fields and synthetic turfartificial grass
Automotive applications eg dashboards steering wheels upholstery
Fiber applications eg garment carpets
Single ply roofing systems
Black coloration of plastics to be recycled by NIR sensor sorting systems
BENEFITS
Increased service life due to less thermal stress on the plastic parts
Reduced air conditioning and energy consumption
Increased comfort Increased Health and Safety
Increased protection against thermal degradation of goods packaged with ldquocoolrdquo plastics
Recycle black parts to create economical value and reduce waste disposal
Ferro offers a full range of Cool Pigments in the whole color spectrum
MAIN PRODUCTS
bull bull bull bull bull
bull
bull bullbullbull
bull
regFERRO Where innovation delivers performancetrade
COOL PIGMENTS FERRO COOL PIGMENTS COLOR SPACE
COOL PIGMENTS (High NIR Reflectance) PY53 Nickel Antimony Titanium
Yellow Rutile
PBr24 Chrome Antimony Titanium Buff Rutile
PY184 Bismuth Vanadate
PG17 Chromium Green-Black Hematite
PY184 PG17 Chrome Oxide Green
PBr29 Chrome Iron Brown Hematite
PY164 Manganese Antimony Titanium Buff Rutile
PBr24PY53
COOL PIGMENTS PBk12 (Moderate NIR Reflectance PY119 PR101or NIR transparency)
PG50 PG17 Transparent to NIR PY164
PG50 PG26Ni Free PBk12 Iron Titanium Brown Spinel PBr29 PB28 Cobalt Aluminate Blue PBk33PB28 PG17
Spinel Turquoise PB36 PB36 Cobalt Chromite Blue-Green Turquoise
Spinel
PBk33 Manganese Ferrite Black Oxide
PG26 Cobalt Chromite Green PV15 PB36 Spinel
PG50 Cobalt Titanate Green PB28 Spinel
PR101 Iron Oxide Red PB29PY119 Zinc Ferrite Brown Spinel
PB29 Ultramarine Blue
PV15 Ultramarine Violet
bull bull
bull bull
bull bull
bull bull
bull bull
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with high NIR reflectance (ldquocoolrdquo pigment)
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
MAIN CHARACTERISTICS
(CrFe)2O3
Pigment Brown 29 (CI 77500)
Hematite structure
Brownish to bluish black shade
MAIN CHARACTERISTICS MANGANESE CHROME IRON
Ease of dispersion
MnFe2O4
Pigment Black 26 (CI 77494)
Spinel structure
Very bluishdeep shade the strongest black CICP
Ease of dispersion
SPINEL
PBk26 FERRITE BLACK BROWN
PBr29
HEMATITE
BLACK
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS 10466 Reddish shade V-780 Strong reddish shade
V-760 Yellowish shade V-781 Strong reddish shade
V-778 Yellowish shade V-785 The most bluish shade
V-778-2 Yellow reddish shade V-10121-2 Dark brown
Excellent dimensional stability no warping no shrinkage
Opaque to visible light UVNIR absorbent
The black CICP with the highest heat fastness
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness gt500oC 5 min Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS F-6331-2 High tinting strength very bluish shade
bull bull
bull bull
bull
bull bull
bull
bull bull
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with moderate NIR reflectance (ldquocoolrdquo pigment)
Used when neither Carbon Black nor Black Iron Oxide can be used for technical reasons
PBk11 IRON OXIDE
BLACK
BLACK MAIN CHARACTERISTICS
MnFe2O
PBk33
4
Pigment Black 33 (CI 77537)
Hematite structure
Brownish to bluish black shade
Ease of dispersion
MANGANESE FERRITE BLACK OXIDE
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
Heat fastness 180oC 5 min Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS 24-3303 Reddish shade Nubifer NB-803K Bluish shade
MAIN CHARACTERISTICS
Fe3O4
Pigment Black 11 (CI 77499)
Magnetite structure
Bluish black shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light NIR absorbent
Suitable for low processing temperature Polyolefins PVC (just unplasticized compounds the more stabilized the PVC is the more suitable conventional Black Iron Oxides become) and Rubber
RECOMMENDED PRODUCTS Nubifer NB-5970 Micronized high tinting strength very bluish shade
COOL PIGMENTS MAIN CHARACTERISTICS
It is well known that under the sun dark surfaces become hot and white surfaces remain cooler When comparing a white plastic part containing TiO2 (Near Infrared -NIR- reflecting pigment) with a black plastic part containing Carbon Black (Near Infrared -NIR- absorbent pigment) the surface temperature difference can reach more than 30degC on a hot sunny day This common effect is not only related to color but also to NIR absorption of the pigments used in a particular application By using the appropriate pigments even dark surfaces can stay cool under the sun This type of pigments also referred to as Cool Pigments do not absorb the NIR portion of wavelengths coming from sunlight There are 2 types of Cool Pigments NIR reflecting pigments and NIR transparent pigments The final behavior of the latter will be influenced by the entire system therefore when using NIR transparent pigments it is recommended to use them in combination with NIR reflecting pigments or substrates Ferro Pigments has a full range of Cool Pigments and many years of experience developing projects in this field so we are the ideal partner to support you in your cool projects
MAIN APPLICATIONS AND BENEFITS APPLICATIONS
PVC applications eg siding window profiles
Agricultural film
Plastic roof tiles
Sport fields and synthetic turfartificial grass
Automotive applications eg dashboards steering wheels upholstery
Fiber applications eg garment carpets
Single ply roofing systems
Black coloration of plastics to be recycled by NIR sensor sorting systems
BENEFITS
Increased service life due to less thermal stress on the plastic parts
Reduced air conditioning and energy consumption
Increased comfort Increased Health and Safety
Increased protection against thermal degradation of goods packaged with ldquocoolrdquo plastics
Recycle black parts to create economical value and reduce waste disposal
Ferro offers a full range of Cool Pigments in the whole color spectrum
MAIN PRODUCTS
bull bull bull bull bull
bull
bull bullbullbull
bull
regFERRO Where innovation delivers performancetrade
COOL PIGMENTS FERRO COOL PIGMENTS COLOR SPACE
COOL PIGMENTS (High NIR Reflectance) PY53 Nickel Antimony Titanium
Yellow Rutile
PBr24 Chrome Antimony Titanium Buff Rutile
PY184 Bismuth Vanadate
PG17 Chromium Green-Black Hematite
PY184 PG17 Chrome Oxide Green
PBr29 Chrome Iron Brown Hematite
PY164 Manganese Antimony Titanium Buff Rutile
PBr24PY53
COOL PIGMENTS PBk12 (Moderate NIR Reflectance PY119 PR101or NIR transparency)
PG50 PG17 Transparent to NIR PY164
PG50 PG26Ni Free PBk12 Iron Titanium Brown Spinel PBr29 PB28 Cobalt Aluminate Blue PBk33PB28 PG17
Spinel Turquoise PB36 PB36 Cobalt Chromite Blue-Green Turquoise
Spinel
PBk33 Manganese Ferrite Black Oxide
PG26 Cobalt Chromite Green PV15 PB36 Spinel
PG50 Cobalt Titanate Green PB28 Spinel
PR101 Iron Oxide Red PB29PY119 Zinc Ferrite Brown Spinel
PB29 Ultramarine Blue
PV15 Ultramarine Violet
bull bull
bull bull
bull
bull bull
bull
bull bull
Excellent dimensional stability no warping no shrinkage
Opaque to visible light with moderate NIR reflectance (ldquocoolrdquo pigment)
Used when neither Carbon Black nor Black Iron Oxide can be used for technical reasons
PBk11 IRON OXIDE
BLACK
BLACK MAIN CHARACTERISTICS
MnFe2O
PBk33
4
Pigment Black 33 (CI 77537)
Hematite structure
Brownish to bluish black shade
Ease of dispersion
MANGANESE FERRITE BLACK OXIDE
Suitable for a broad range of polymers eg Polyolefins PS ABS Engineering Polymers (including very high processing temperature resins) PVC Silicones and Rubber
Heat fastness gt500oC 5 min
Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
Heat fastness 180oC 5 min Light fastness Excellent (8 on blue wool scale) Weather fastness Excellent (5 on grey scale) Acid fastness Excellent Alkali fastness Excellent Solvent fastness Excellent
RECOMMENDED PRODUCTS 24-3303 Reddish shade Nubifer NB-803K Bluish shade
MAIN CHARACTERISTICS
Fe3O4
Pigment Black 11 (CI 77499)
Magnetite structure
Bluish black shade
Ease of dispersion
Excellent dimensional stability no warping no shrinkage
Opaque to visible light NIR absorbent
Suitable for low processing temperature Polyolefins PVC (just unplasticized compounds the more stabilized the PVC is the more suitable conventional Black Iron Oxides become) and Rubber
RECOMMENDED PRODUCTS Nubifer NB-5970 Micronized high tinting strength very bluish shade
COOL PIGMENTS MAIN CHARACTERISTICS
It is well known that under the sun dark surfaces become hot and white surfaces remain cooler When comparing a white plastic part containing TiO2 (Near Infrared -NIR- reflecting pigment) with a black plastic part containing Carbon Black (Near Infrared -NIR- absorbent pigment) the surface temperature difference can reach more than 30degC on a hot sunny day This common effect is not only related to color but also to NIR absorption of the pigments used in a particular application By using the appropriate pigments even dark surfaces can stay cool under the sun This type of pigments also referred to as Cool Pigments do not absorb the NIR portion of wavelengths coming from sunlight There are 2 types of Cool Pigments NIR reflecting pigments and NIR transparent pigments The final behavior of the latter will be influenced by the entire system therefore when using NIR transparent pigments it is recommended to use them in combination with NIR reflecting pigments or substrates Ferro Pigments has a full range of Cool Pigments and many years of experience developing projects in this field so we are the ideal partner to support you in your cool projects
MAIN APPLICATIONS AND BENEFITS APPLICATIONS
PVC applications eg siding window profiles
Agricultural film
Plastic roof tiles
Sport fields and synthetic turfartificial grass
Automotive applications eg dashboards steering wheels upholstery
Fiber applications eg garment carpets
Single ply roofing systems
Black coloration of plastics to be recycled by NIR sensor sorting systems
BENEFITS
Increased service life due to less thermal stress on the plastic parts
Reduced air conditioning and energy consumption
Increased comfort Increased Health and Safety
Increased protection against thermal degradation of goods packaged with ldquocoolrdquo plastics
Recycle black parts to create economical value and reduce waste disposal
Ferro offers a full range of Cool Pigments in the whole color spectrum
MAIN PRODUCTS
bull bull bull bull bull
bull
bull bullbullbull
bull
regFERRO Where innovation delivers performancetrade
COOL PIGMENTS FERRO COOL PIGMENTS COLOR SPACE
COOL PIGMENTS (High NIR Reflectance) PY53 Nickel Antimony Titanium
Yellow Rutile
PBr24 Chrome Antimony Titanium Buff Rutile
PY184 Bismuth Vanadate
PG17 Chromium Green-Black Hematite
PY184 PG17 Chrome Oxide Green
PBr29 Chrome Iron Brown Hematite
PY164 Manganese Antimony Titanium Buff Rutile
PBr24PY53
COOL PIGMENTS PBk12 (Moderate NIR Reflectance PY119 PR101or NIR transparency)
PG50 PG17 Transparent to NIR PY164
PG50 PG26Ni Free PBk12 Iron Titanium Brown Spinel PBr29 PB28 Cobalt Aluminate Blue PBk33PB28 PG17
Spinel Turquoise PB36 PB36 Cobalt Chromite Blue-Green Turquoise
Spinel
PBk33 Manganese Ferrite Black Oxide
PG26 Cobalt Chromite Green PV15 PB36 Spinel
PG50 Cobalt Titanate Green PB28 Spinel
PR101 Iron Oxide Red PB29PY119 Zinc Ferrite Brown Spinel
PB29 Ultramarine Blue
PV15 Ultramarine Violet
COOL PIGMENTS MAIN CHARACTERISTICS
It is well known that under the sun dark surfaces become hot and white surfaces remain cooler When comparing a white plastic part containing TiO2 (Near Infrared -NIR- reflecting pigment) with a black plastic part containing Carbon Black (Near Infrared -NIR- absorbent pigment) the surface temperature difference can reach more than 30degC on a hot sunny day This common effect is not only related to color but also to NIR absorption of the pigments used in a particular application By using the appropriate pigments even dark surfaces can stay cool under the sun This type of pigments also referred to as Cool Pigments do not absorb the NIR portion of wavelengths coming from sunlight There are 2 types of Cool Pigments NIR reflecting pigments and NIR transparent pigments The final behavior of the latter will be influenced by the entire system therefore when using NIR transparent pigments it is recommended to use them in combination with NIR reflecting pigments or substrates Ferro Pigments has a full range of Cool Pigments and many years of experience developing projects in this field so we are the ideal partner to support you in your cool projects
MAIN APPLICATIONS AND BENEFITS APPLICATIONS
PVC applications eg siding window profiles
Agricultural film
Plastic roof tiles
Sport fields and synthetic turfartificial grass
Automotive applications eg dashboards steering wheels upholstery
Fiber applications eg garment carpets
Single ply roofing systems
Black coloration of plastics to be recycled by NIR sensor sorting systems
BENEFITS
Increased service life due to less thermal stress on the plastic parts
Reduced air conditioning and energy consumption
Increased comfort Increased Health and Safety
Increased protection against thermal degradation of goods packaged with ldquocoolrdquo plastics
Recycle black parts to create economical value and reduce waste disposal
Ferro offers a full range of Cool Pigments in the whole color spectrum
MAIN PRODUCTS
bull bull bull bull bull
bull
bull bullbullbull
bull
regFERRO Where innovation delivers performancetrade
COOL PIGMENTS FERRO COOL PIGMENTS COLOR SPACE
COOL PIGMENTS (High NIR Reflectance) PY53 Nickel Antimony Titanium
Yellow Rutile
PBr24 Chrome Antimony Titanium Buff Rutile
PY184 Bismuth Vanadate
PG17 Chromium Green-Black Hematite
PY184 PG17 Chrome Oxide Green
PBr29 Chrome Iron Brown Hematite
PY164 Manganese Antimony Titanium Buff Rutile
PBr24PY53
COOL PIGMENTS PBk12 (Moderate NIR Reflectance PY119 PR101or NIR transparency)
PG50 PG17 Transparent to NIR PY164
PG50 PG26Ni Free PBk12 Iron Titanium Brown Spinel PBr29 PB28 Cobalt Aluminate Blue PBk33PB28 PG17
Spinel Turquoise PB36 PB36 Cobalt Chromite Blue-Green Turquoise
Spinel
PBk33 Manganese Ferrite Black Oxide
PG26 Cobalt Chromite Green PV15 PB36 Spinel
PG50 Cobalt Titanate Green PB28 Spinel
PR101 Iron Oxide Red PB29PY119 Zinc Ferrite Brown Spinel
PB29 Ultramarine Blue
PV15 Ultramarine Violet
bull bull bull bull bull
bull
bull bullbullbull
bull
regFERRO Where innovation delivers performancetrade
COOL PIGMENTS FERRO COOL PIGMENTS COLOR SPACE
COOL PIGMENTS (High NIR Reflectance) PY53 Nickel Antimony Titanium
Yellow Rutile
PBr24 Chrome Antimony Titanium Buff Rutile
PY184 Bismuth Vanadate
PG17 Chromium Green-Black Hematite
PY184 PG17 Chrome Oxide Green
PBr29 Chrome Iron Brown Hematite
PY164 Manganese Antimony Titanium Buff Rutile
PBr24PY53
COOL PIGMENTS PBk12 (Moderate NIR Reflectance PY119 PR101or NIR transparency)
PG50 PG17 Transparent to NIR PY164
PG50 PG26Ni Free PBk12 Iron Titanium Brown Spinel PBr29 PB28 Cobalt Aluminate Blue PBk33PB28 PG17
Spinel Turquoise PB36 PB36 Cobalt Chromite Blue-Green Turquoise
Spinel
PBk33 Manganese Ferrite Black Oxide
PG26 Cobalt Chromite Green PV15 PB36 Spinel
PG50 Cobalt Titanate Green PB28 Spinel
PR101 Iron Oxide Red PB29PY119 Zinc Ferrite Brown Spinel
PB29 Ultramarine Blue
PV15 Ultramarine Violet
