Fermit GmbH

Productcatalogue 2011

becomes

A little bit aboutthe history...

In the early 20th century, paints for

steam locomotives were already being

produced under the trademark FERMIT.

The business field was rapidly widened

with the production of sealants and in

that way accompanied the development

towardsmore comfort in the home.

1

Thanks to cooperation with the BARTHELEMY Group , the company now has a product

research centre at its disposal which makes possible the launching of new products and

materials in keeping with technical progress and the regulations, the company being able

at the same time to retain its autonomy, its specific orientation and the response times

which established its reputation.

Thanks to the presence of the Group in several European countries, FERMIT will benefit

from the promotion of its development activity in Germany and Europe and is strengthening

its ability to provide customers from different countries with assistance and support.

Fermit provides a comprehensive

range of products for heating and

sanitary equipment which meet

all the requirements in the areas

of heating construction and

sanitary technology.

Sealing of threaded

connections, glued and

plug-in connections

Plant maintenance as well as

materials for sanitary and

heating installations and for

domestic equipment units

Their quality makes products from

Fermit indispensable helpers with

which users can always be sure to

deliver faultless work.

Fermit sells its products via the

specialised trade:Trade in sanitary equipment

and heating construction.

Direct selling

to industry.

All product information can be

viewed on ourWebsite:

WWW.FERMIT.DE

For more detailed information we

will be pleased to be available to

you during our office hours.

The German company with its head office in Vettelschloß/

Kalenborn (near Bonn) in Rhineland-Palatinate hasmore than 1800m3

of land built-upon for production, logistics and customer service.

With its 18machines for production and conditioning the company of

FERMIT and its 15 employees set everything in motion for the

satisfaction of their customers.

Certified according to

DIN EN ISO 9001: 2008

2Productcatalogue

CERTIFIEDACCORDINGTODINEN ISO 9001: 2008

Productcatalogue 3

SANITARY EQUIPMENT

THREAD SEALS

According to DIN EN 751-2 and DIN 30660 approved by DVGW (German Gas andWater Association)for domestic installation of gas and drinking water under: DVGW – Reg. No. NV-5142BM0052.

Formetal threaded connections in conjunctionwith hempSuitable for gas and drinking water in domestic equipment installation.

Areaof use:Water– fordrinkingwater, hot andcold: Temperature range: 0°C to +95°C /Pressure: 16 barArea of use: Heating: Temperature range: 0°C to +130°C / Pressure: 7 barArea of use: Gas: Temperature range: -20°C to +70°C / Pressure: 5 barUse: for all types of gas including natural gas and liquefied petroleum gas in the gaseous phase

Clean and non-toxic

Non-sticky

Does not irritate skin

Solvent-free

Non-shrinking

Non-hardening

Does not dry up

Dismountable

150g tube 325g tube 450g tin 800g tin 4kg bucket

NEO FERMIT UNIVERSAL

For all threads according to DIN 2999 up to a diameter of 2 inches. Gas, water, heating and compressed air unitsup to amaximum pressure of 10 bar. In the case of flange seals coat both sides with Fermit-Spezial.

Light-coloured thread sealing paste,can be worked easily and quickly and does not harden.Application in conjunction with hemp.Not for gas anddrinkingwater units in domestic equipment installation.

Temperature range: -25°C to +100°C

Easy toworkwith

Seals immediately

Can be dismounted at any time

Does not dry up

Reliable and safe

70g tube 650g tin 5kg bucket

FERMIT SPEZIAL (service water)

FlaxUse together with the sealing pastes Neo Fermit Universal,Fermit-Spezial and Hochdruck-Fermit.Improves the stability of the connection under pressure.

Temperature resistance: +140°C

200g tress 80g bobbin 40g bobbin Dispenser 40g flax dispenser 80g flax dispenser

HEMP

01002 01003 01004 01005 01007

24002 24003 24007 24004 24005 24006

02001 02003 02004

SANITARY EQUIPMENT

Productcatalogue 4

For all threads according to DIN 2999 up to 2 inches in diameterCoat flanges, faces and intermediate shims on both sides with Hochdruck-Fermit

Pressure-proofandheat-resistantputty,also inconjunctionwithhempNon-toxic, pasty putty for sealing threads,flanges and faces on high-pressure equipment,turbine casings, steam lines etc.

Temperature range: up to +160°C / Pressure: 16 bar

Easy toworkwith

Does not dry up

Connectionscanbeundoneagain

Heatandhighpressure-resistant

Reliable/safe

Can be stressed immediately

650g tin 5kg bucket

HOCHDRUCK-FERMIT

Versatile liquid synthetic resin sealantUniversal sealing compound and glue, resistant to oil; liquefiedpetroleum gas, petrol, benzene, paraffin/kerosene, greases, water,steam, acid, alkaline solution, brine, seawater etc. ..., once set alsoresistant to spirit and all fuel mixtures

For the sealing of threads, flanges and faces on water, petrol, grease and oil lines,oil heating units, propane gas units, engines, engine casings, gearboxes, machines,process equipment and tanks.Fermitol is suitable for many purposes and numerousmaterials.Temperature range: -10°C to +130°C / Pressure: 4 bar

Easy toworkwith

Seals can be put intoservice immediately

Integrated brush

Practical in use

Instant sealing

Reliable – safe

Economical

Can be usedwith andwithout hemp

125g bottle 250g bottle 1kg refill bottle

FERMITOL liquid

Anaerobic sealant for cylindrical and conicalmetal threadsfor hot and cold water circuits .

Temperature range: -30°C to +90°C, briefly up to 110°CPressure: After 15min = 4 bar, after 2 hrs = 30 barPolymerisation time: 1 – 3 hoursMax. thread diameter: 2 inchesMax. thread play: 0,25mm

Usewithout hemp

Suitable for hot and coldwater

Can be subjected topressure quickly

Enrichedwith PTFE

75ml bottle

FERMITAN service water

According to DIN EN 751-1 class H, DVGW-Reg.-No. NG-5146 BU 0219.

Anaerobic sealant for cylindrical and conicalmetal threadsfor hot water circuits in the heating field as well as oil and fuel oil and for allcombustiblegasessuchasbutane,propane,naturalgasand forcompressedair.

Temperature range: -30°C to +90°C, briefly up to 120°CPressure: After 15min = 4 bar, after 2 hrs = 30 barMax. thread diameter: 2 inchesPolymerisation time: 1 – 3 hoursMax. thread play: 0,25mm

Usewithout hemp

Suitable for hot water, gas andoil circuits

Can be subjected topressure very quickly

Enrichedwith PTFE

75ml bottle

Heating

03001 03003

04001 04002 04004

05001

05002

THREAD SEALS

Productcatalogue 5

SANITARY EQUIPMENT

PTFE thread sealing tape formetal threadsApplication in all sanitary and heating circuits in the hot and coldwater areas. DVGW tested. DIN EN 751-3

PTFEGoldenbandDVGW and BAM tested and approved, DIN EN 751-3, DIN 30660 KTW;for natural gas, oxygene, lye, chemicals, oil, water, gasoline, and so on

Temperature range: -60°C to +260°C / Pressure: 20 barFRp; DN < 10 / GRp: 10 <DN < 50

dismantlable

easy and quickly applicable

not flammable and does not burn

no use-by date

resistant against fungal attacks

does not swell up

FRp GRp GoldenBand

PTFE tape

THREAD SEALS

Temperature range: -400°F to +500°F / -240°C to +260°C / Pressure: 30 barfor oxygen: up to 60°C and 40 bar . Liquid and gaseous

24010 24011 24012

dismantlable

easy and quickly applicable

not flammableanddoesnotburn

no use-by date

resistant against fungal attacks

does not swell up

for all types of threads out ofmetal or plastic

for solar installation

with integrated cutter

no drying

remains soft and pliable

FERMIT PTFE pipe sealing thread• DIN-DVGW for gas and water installations according to EN751-3 FRp and GRpand DIN 30660 (NV-5143BP0261), tested & approved up to 100 bar pressure inaccordancewith EN751-3 for gases of the 1st, 2nd and 3rd family and for hotwater• DINDVGWtested&approved forpipeadjustmentsup to45°, forhot&cold&drinkingwater in accordancewith KTWrecommendations of theGermanHealthMinistry• WRAS listed product for U.K. Water Regulations Advisory Scheme for usewith hot and coldwater (Ref. 0212515)• ASTMF423 Steam&ColdWater Cycle Test - passed• BAM tested & approved for use with gaseous oxygen at 30 bar and 100°C(for usewith the installation aid, II-2742/2004E)• BAM tested & approved for use with liquid oxygen at 30 bar and 100°C(usewithout installation aid, II-2742/2004E)• ULListedSealMaterial10BNFileMH26734accordingtoOutline1321forusein assemblies handling gasoline, petroleum oils, naphta, propane, butane,benzene, kerosene and natural gas (<300 psig)• KIWAGASTECQa (NL): norm. 31, class "20"• Absolutely chemical resistant tomost aggressive chemicals, solvents, fuelsandacids, completely resistant to surface fouling, oxidation, embrittlement,fungal or bacterial growth, enzymatic ormicrobiological attack

Installation:Beginning at the end of the thread, wrap in a overlapping haphazardfashion in the direction of the thread, apply 2 or 3 drops of the installation aiddirectly fromtheseparatedispenserandsmearover thePTFEwith the finger,concentrate at the end of the pipe and cover only 10 to 15mmof the threadThemanufacturer`s guidelines on the number ofwraps are:1/2" pipe 12 (fine threads) to 18 (coarse threads)wraps1 1/2" pipe 16 (fine threads) to 24 (coarse threads)wrapsfor other pipe diameters adjust the number ofwraps

Thread sealing tape 175m

PTFE pipe sealing thread

Temperature range: -200°C to +240°C / Pressure: 30 barup to 100°C for oxygen, up to 100 bar for hot water

24013

SANITARY EQUIPMENT

Productcatalogue 6

PRODUCTS FOR PVC PIPE INSTALLATION

Universal hard PVC adhesive for pressure and drainage systemsSuitable for connections of tubes and threads made of hard PVC inthe hot and cold water area as well as for drain pipes and buried PVCpipes.

Working temperature: +5°C to +35°C / Temperature range: bup to 90°CCuring time: at a diameter < 90mm = 1 hourColour: transparentfor diameter from 25 up to 160mm (for other diameters please contact themanufacturer)for pressures up to 25 bar (for other pressures please contact themanufacturer)

Gel-like

Does not drip

Does not leak out

Effective after only 1 hour

Slight odour

Clean

Easy to use

80ml bottlewith brush 125ml bottlewith brush 125ml tube 250ml bottlewith brush 500ml bottlewith brush 1l bottlewith brush

FERMITAC ADHESIVE

For the cleaning of connectionsmade of PVC and PVCC before gluingThe product cleans the surface to free it from dirt and grease, etchesthe surface and hence helps to improve gluing.

Easy to apply

Takes effect immediately

Reliable and safe

125ml bottle 500ml bottle 1l bottle

FERMITAC CLEANER

Lubricant for plastic pipes out of synthetic based rawmaterialsUse in the installation of plastic pipes above all in the sanitary

Temperature of use: -5°C to +40°C / Storage: +5°C to +25°CColour:whiteIn line with the guidelines of the TZWKarlsruhe (Technology Centre for Water)

water-miscible

suitable for drinkingwater

suitable for all diameters

very good lubrication and slidingcaracteristics

skin-compatible

250ml bottle 500ml bottle

FERMIT LUBRICANT

22001 22002 22003

21001 21002

22101 22106 22102 22103 22104 22105

toMay 2011 available toMay 2011available from June 2011 available

Productcatalogue 7

SANITARY EQUIPMENT

INSTALLATION PUTTIES

a permanently plastic sealing compoundPlastic-Fermit is a permanently plastic, kneadable sealant com-pound based on plastic which meets the highest demands made onsanitary installation.Is particularly suitable for the insertion of drain valves in, for exam-ple, washstands, baths and is suitable for hot and cold water.

Temperature range: 0°C to 120°C. Do not use formarble or other natural stone!

250g tin 500g tin 1kg tin 5kg bucket

PLASTIC FERMIT – white

Sealant and sleeve puttyPutty with strong adhesion power for washstands and water closetbowls as well as sewerage units or sleeves on buried lines.

Temperature range: 0°C to 100 °C

250g tin 500g tin 5kg bucket

AQUA FERMIT - red

LUBRICANTS

Non-dripping lubricatinggrease forhotandcoldwatervalvesand fittings.Ductile, smooth, non-dripping lubricating grease for valves and fit-tings, that with regard to food law is beyond reproach and is there-fore also suitable for drinking water pipes. Can also be used formachines and equipment where Glissa valve and fitting greasecomes into contact with food or drinking water.

Temperature range: -20°C to + 140°C.

60g tube 30g tube 14g tube

GLISSA VALVE AND FITTING GREASE

In conformity with the KTW recommendations of the German Federal Health Office, is approved according to NSF-H 1 and to DIN 51502.

High-grade lubricant for gas valves and fittings and actuators inaccordancewith DIN EN 377.Glissa all gas valve grease is resistant to all gases and gas mixturesmentioned in DVGW worksheet G 260. It is also used for greasingcock plugs or sealing elements such as membranes, packings orelastomer seals etc.

Temperature range: up to 150°C

20g tube

GLISSA ALLGAS VALVE GREASE

Corresponds to DIN DVGW 96.01e 1055

06001 06002 06003 06004

07001 07002 07004

15001 15002 15003

15010

Permanently plastic

Ductile

Economical

Can be worked quickly

Does not become brittle

Good adhesion power

Storable indefinitely

Viscoplastic

Easily kneadable

Strong adhesion powerwithout hardening

Reliable - Safe

Food-safe

Non-dripping

Ductile

Reliable

Synthetic

Non-dripping

Ductile

Suitable for gas valves andfittings

Productcatalogue 8

SANITARY EQUIPMENT

SEALANTS

Neutral cross-linked silicon joint sealantElastic, odourless silicon joint sealant with fungistatic incorporation,lightfast, cleaner-resistant and reacting with atmospheric moisture.For sealing, above all in sanitary and damp rooms, in the kitchenarea and in sectional furniture, suitable for acrylic.

Temperature range: -40°C to 120°C / Processing temperature: +5°C to +40°CColours: transparent, white, grey / Storage: for at least 1 year cool and dry

Lightfast

Odourless

Elastic

Cleaner-resistant

fungal growth

310mlwhite cartridge 310ml transparent cartridge 310ml grey cartridge

FERMITOPP N

Acetic cross-linked silicon joint sealantElastic silicon joint sealant with fungistatic incorporation, lightfast,cleaner-resistant and reacting with atmospheric moisture.For sealing, above all in sanitary and damp rooms, in the kitchenarea and in sectional furniture.

Temperature range: -40°C to 120°C / Processing temperature: +5°C to +40°CColours: transparent, white / Storage: for at least 18months cool and dry

Lightfast

Elastic

Cleaner-resistant

fungal growth

310mlwhite cartridge 310ml transparent cartridge

FERMITOPP E

Putty spray gunwith racksturdy toothed connection rod for pressing out of standard cartouches310ml (silicon, glue, refractory boiler putty, ...)

simply in the handling

quick and clean

1 Putty spray gun

PUTTY SPRAY GUN A-ZAHN

New sealing technology forwall fittingsCan be used for the sealing of wall fittings/S bends in the sanitaryarea. Prevents moisture from penetrating into the masonery,plaster, dry construction, ...

quick and clean

adhesive film on one side

mountablewithout tools

nomorewall closingwith silicon

again dismantlable

nodirtonscrewrosetteorSbend

Two-Set

GASKETS FORWALL-MOUNTED VALVES AND FITTINGS

16001 16002 16003

16010 16012

17002

23001

Productcatalogue 9

SANITARY EQUIPMENT

SANITARY MAINTENANCE

Chemical pipe cleanerEliminates blockages, unpleasant odours and dangerous bacteria inthe drains from sinks, wash basins, water closet bowls and urinalssimply, quickly and reliably. Does not attack metals (apart from alu-minium and zinc), glass or porcelain. In the event of use on enamelseparately dissolve Fermitex beforehand and do not leave it standingin the enamel too long, as the latter can otherwise become dull. Thepipe cleaner is corrosive, so use suitable means of protection.

1kg tin 5kg bucket

FERMITEX Powder

Chemical pipe cleanerEliminates blockages, unpleasant odours and dangerous bacteria inthe drains from sinks, wash basins, water closet bowls and urinalssimply, quickly and reliably. Do not use in connection with alumi-nium, zinc or gold-plated fittings. In case of regular use it is preven-ting from blockages and bad odours.The pipe cleaner is corrosive, so use suitable means of protection.

1l bottle

Liquid

12001 12002

12005

Soluble in cold water

Automatic

Highly effective

Effervescent

Takes effect quickly

Simple to apply

scentless

Automatic

Highly effective

colourless

Takes effect quickly

Simple to apply

Productcatalogue 10

HEATING EQUIPMENT

Highly refractory, acetic crosslinked sealantelastic single-package silicon sealantFermitopp SE 300 is used for sealing expansion joints on heatingflues, ovens, reactors, chimneys, stacks, etc., also applicable in theautomotive sector.

Temperature range: -50°C to +250°C (in spikes up to 300° C)Processing temperature: +5°C to +40°C / Skin formation: approx 10min.Time to complete cure: approx. 2mm per day / Storage time: 18months cool and dry

Highly refractory

Hot air-resistant

Reliable - Safe

UV resistant

colourfast

FERMITOPP HE 300

Sealing putty on potassiumwater glass basis.Non-shrinking refractory boiler putty e.g. for sealing off from fluegases during the use of boiler equipment, ovens and stoves.

Temperature-resistance:more than +1000°C

Easy to work with

Asbestos-free

Non-shrinking

Seals well

Adheres well to metal andother materials

Non-crumbling

250g tin 500g tin 1kg tin 6kg bucket 20kg bucket 310ml cartridge

FROSCHMARKE REFRACTORY BOILER PUTTY

Adhesive for fireproof construction unitsRefractory glue HT 1100 is for sticking together fireproof constructionunits and for fastening of glass fibre or ceramic fibre sealing cords,fireclay materials to metal parts, gluing of jacket tubes, sleeves andother fireclay parts, setting fireclay bricks in stoves and heating units,designed to adhere insulating board, ...

Temperature resistance: 1100°CColour: beigeStorage time: 24months cool and dry in a closed packing

very good adhesiveness

veryhigh temperatureresistance

no smoke development

easy to apply

REFRACTORY GLUE HT 1100

Highly refractory, neutral cross-linkedelastic single-package silicon sealantFermitopp SE 300 is used for sealing expansion joints on heatingflues, ovens, reactors, chimneys, stacks, etc., also applicable in theautomotive sector.

Temperature range: -50°C to +250°C / Processing temperature: +5°C to +40°CSkin formation: approx 10min. / Time to complete cure: approx. 2mm per dayStorage time: 12months cool and dry

Highly refractory

Odourless

Hot air-resistant

Reliable - Safe

UV resistant

colourfast

310ml cartridge red 310ml cartridge black

FERMITOPP HN 300

REFRACTORY PRODUCTS

SEALANTS

11001 11002 11003 11005 11006 11007

310ml cartridge 17ml tube

11301 11302

16004 16005

310ml cartridge red

16013

Productcatalogue 11

HEATING EQUIPMENT

Liquid sealant for small leaks.3-D-SEALANT closes pores, cracks or damage to gaskets and seals onheatingboilers, radiators, pumps, cylinder blocks and car radiators fromthe inside so that they are absolutely water and steam pressure-tight.3-D-SEALANT is not suitable for the sealing of particularly narrowpas-sages such as, for example, in the case of thermostat valves.

Input quantity: 1kg of 3-D-Sealant for 150 l of heating waterPreparation: thoroughly mix 1 kg of 3-D-Sealant with approx. 10 l of hot water

1kg bottle

3-D-SEALANT

Highly refractory sealing paste for threaded and flanged jointsPrevents the sticking of gaskets, bolts, screws etc. which are expo-sed to intense heat. In the case of flange gaskets and surface seals,coat both sides with the paste. In the case of use as sealants forthreads (DIN 2999) at over 160 degrees C, the use of aluminiumhemp with Nivo Graphite Paste is recommended as normal hempbecomes scaly at these temperatures and then leaks can occur.

Temperature range: 0°C to +300°C

500g tin

NIVO GRAPHITE PASTE – Flexoperm

MAINTENANCE

14001

13001

Low cost

Versatile

Easy to use

Protection from rust

Highly refractory

Versatile

Reliable - Safe.

Productcatalogue 12

General Terms and Conditions of Business of Fermit GmbH

1. Conclusion of contract

1.1 For the business relations between Fermit GmbH and the Purchaser the following terms and conditions governing sale anddelivery shall apply in the version applicable at the point in time of the purchase order. Any terms and conditions of the Pur-chaser deviating from them shall only apply to the extent that they have been expressly recognized in writing in the individual case.

1.2 Our quotations shall be without engagement. Orders shall be deemed to have been accepted by us if we have confirmed this inwriting to the person placing the order or have executed delivery tacitly.

1.3 Collateral agreements, amendments to, or cancellation of the contract shall require to be made in writing in order to be legallyeffective. This shall also apply to any departure from the requirement of the written form.

1.4 To the extent that personal data are stored or are otherwise processed, we shall meet the requirements of the German FederalData Protection Act. We shall store and process personal data only to the extent that is necessary within the scope of thecontractual relationship.

2. Prices

2.1 Our prices shall be net prices. The sales or value-added tax applicable in each case shall be separately charged and shownopenly.

2.2 The basis for pricing shall be ex Vettelschoß – Kalenborn. The cost of transport, packaging and storage shall be chargedseparately by us. From a minimum order value of € 500.00 we shall offer the Purchaser the refund of the cost of transport.In that case a credit for the cost of transport applied shall be made when the invoice is issued.

3. Delivery

3.1 The Purchaser shall be obliged to take over and to accept the goods ordered. If the goods are damaged in transit or if the goodslisted in the consignment note is not completely delivered, the consignee must have the damage noted in detail on theconsignment note by the deliverer and confirmed by signature. The consignment note with the entry concerning the damage isto be passed on to us.

3.2 The statement of delivery times shall be without engagement, unless a delivery time has been promised in writing by us.

3.3 If disruptions of operations, force majeure, fire damage, traffic slowdown, shortage of raw materials or other events which arebeyond our control – regardless of whether they have happened to us or to one of our external suppliers – prevent the fulfilmentof our supply obligation, the delivery time shall be extended by the duration of the disruption. Otherwise both parties shall beentitled to withdraw from the contract if as a result of such unforeseen events delivery subsequently becomes impossible orunreasonable.

4. Terms of payment

4.1 Our invoices shall be payable within 30 days of the date of delivery and invoicing or within 10 days with 2 % discount for earlypayment. The acceptance of bills of exchange or cheques shall be done on account of performance.

4.2 If the time permitted for payment is exceeded, we shall be entitled to demand default interest in the amount of 5 % above therespective base interest rate at the latest as from the 31st day after the due date and receipt of the invoice. If we have provablyincurred a higher loss as a result of the delay we shall be entitled to claim for it.

4.3 Against our accounts receivable offsetting shall only be permitted with such accounts receivable as are undisputed or which havebeen recognised by declaratory judgement.

Productcatalogue 13

General Terms and Conditions of Business of Fermit GmbH

5. Retention of title

5.1 The goods shall remain our property up to complete payment of all of the accounts receivable due from the Purchaser.

5.2 In the event of default on payment or any other behaviour not in conformity with the contract, we shall be entitled to withdrawfrom the contract and to demand the surrender of the goods subject to retention of title if we have beforehand fruitlessly allowedthe Purchaser a reasonable period of time for the settlement of payment.

6. Warranty

6.1 The Purchaser shall be obliged to complain about any obvious defects without undue delay.

6.2 If there is a defect in the goods for which we are responsible, the Purchaser can demand subsequent performance in the form ofreworking or substitute delivery. As long as we meet our obligations of subsequent performance, the Purchaser shall not beentitled to demand any reduction of the purchase price or to declare withdrawal from the contract.

7. Liability

7.1 Unless stated otherwise below, further claims by the Purchaser – no matter on what legal grounds – shall be excluded.Therefore we shall not accept any liability for damage which has not been caused to the item delivered itself. Neither shall weaccept liability for any loss of profit or for any other property damage/loss incurred by the Purchaser. To the extent that ourliability is excluded or restricted, this shall apply also to the liability of our employees, representatives and vicarious agents.

7.2 The restriction of liability subject to a ruling under Item 7.1 shall not apply if the cause of the damage or loss is based on intentor gross negligence, or personal injury (damage to life and limb or impairment of health) is involved. Neither shall it apply if thePurchaser makes claims under the German Product Liability Act on the grounds of the absence of a warranted characteristic oron the grounds of a breach of material contractual obligations.

8. Place of performance and place of jurisdiction

The place of performance and place of jurisdiction shall be Linz/Rhine

9. Discounts

Arrangements concerning discounts shall be made solely in individual cases and only in writing.

Status: as of January 2006

Fermit GmbH

Zur Heide 4-D-53560 VettelschoßPhone: +49 (0) 2645-2207 - Fax: +49 (0) 2645-3113 - Homepage: www.fermit.de - E-Mail: info@fermit.de

Edition:NovemberDecember2010-Photography:Fotolia-Layout:PHBINDA-33(0)156839039

CONTACT FERMIT GMBH

Mr. Walter StremmingHahnenstr. 531241 IlsedePhone +49 (0) 5172 - 93 322Fax +49 (0) 5172 - 93 323

South-Niedersachsen, Sachsen-Anhalt, PLZ 32 and 33 from NRW

Fa. Fritz OstermannMr. Boris JankiewiczRensingstr. 36-3844807 Bochum-RiemkePhone +49 (0) 234 - 53 557Fax +49 (0) 234 - 53 558

Nordrhein-Westfalen (without PLZ 32 and 33)

Mr. Michael LotzPostfach 13 4765703 Hofheim / Ts.Phone +49 (0) 6192 - 36 061Fax +49 (0) 6192 - 37 580

Hessen, Rheinland-Pfalz, Saarland, Thüringen

Mekisan Handelsgesellschaft mbHMr. Max MensingGratweinerstr. 63A-8111 Judendorf-StraßengelPhone 0043 - 664 105 27 93Fax 0043 - 312 42 35 70

Austria

Mr. Guido WiestZur Heide 453560 VettelschoßOffice +49 (0) 151 - 22 68 75 77Fax +49 (0) 7392 - 91 24 29

Baden-Württemberg / Bayern

Fa. Theodor RennerMr. Jürgen Wendler von BorstelSchenefelder Landstraße 1625421 PinnebergPhone +49 (0) 4101 - 552 433Fax +49 (0) 4101 - 552 403

Schleswig-Holstein, Hamburg, North-Niedersachsen, Mecklenburg-Vorpommern

Mr. Christian RischowPlanitzstr. 3212621 BerlinPhone +49 (0) 30 - 32 66 89 12Fax +49 (0) 30 - 32 66 89 11

Berlin, Brandenburg, Sachsen