National Institute of Technology Campus, Hanamkonda, Telangana 506004

National Institute of Technology, Warangal (Deemed University) , formerly known as Regional Engineering College, was established in 1959. Pandit Jawaharlal Nehru laid the foundation stone for this institute on October 10, 1959, the first in the chain of 30 NITs (formerly known as RECs) in the country. The Institute is well known for its dedicated faculty, staff and the state-of-the art infrastructure conducive to a healthy academic environment. The Institute is constantly striving to achieve higher levels of technical excellence. Evolving a socially relevant and yet internationally acceptable curriculum, implementing innovative and effective teaching methodologies and focusing on the wholesome development of the students are our concerns. The Institute currently has thirteen academic departments and a few advanced research centres in various disciplines of engineering, pure sciences and management, with nearly 100 laboratories organized in a unique pattern of functioning, Central Library with state of the art facilities, Auditorium, Student Activity Centre, Mega Computer Centre, Indoor Games Complex, big stadium, Seminar Halls with required infrastructure, Dispensary with state of art of facilities, etc. Faculty of repute, brilliant student community, excellent technical and supporting staff and an effective administration have all contributed to the pre-eminent status of N.I.T., Warangal.

Student Name Feedback Text Branch

Aadithyanathan Venkataramani

Course gives a very nice introduction into the world of data science and analysis of processes.

Electrical and Electronics Engineering

Ravali Nukala

The certificate will be very useful, given that it is yet another qualification of sorts. It is an acknowledgement of the skill and knowledge that we have acquired, and it will definitely help in our professional life. Chemical

Hardik Jain

This course/ certificate will be very useful during my Summer intern which I would be doing in ITC Limited. The use of DMAIC approach is growing everyday in today's industrial scenario and this course has opened a whole new field for me to venture into.

B.Tech. Mechanical Engineering

Wafa Adeel

An interesting introduction to the art of thought process and action flow, the course was an intriguing analysis of simple wisdom. Every topic illustrated how tasks I've previously undertaken could have been done better, making me wish I could revisit my internship and do it all over again. A great instructor was also key to success. Electronics & Communication

Nikhil Tiwari

Today, most MNCs encourage to make their processes more productive by the application of approaches like the 6 sigma. Its prior knowledge will be an asset in getting a job and later while applying it. Also, the importance of statistics is understood well. Mechanical/B.Tech

Neil

Chemical Engineering is a process engineering. For any individual with six sigma certification will help him immensely to efficiently operate. I think for any individual six sigma is an essential asset. Chemical

KRISHNA PRASAD JP

It would be very useful to me for my future since i'm doing my masters in construction management (civil engineering), six sigma which is aspect of total quality management and is core subject of my specialization. It would be very useful tool for me since i want to become an entrepreneur.

CONSTRUCTION MANAGEMENT

ARUN RAMASWAMY

I would like to use this certificate as a proof of having completed the Six Sigma course on my resume

MECHANICAL ENGINEERING

Vivek Kuliyal

Being a construction management student, i am supposed to deal with process and project management ensuring required quality under specified time with proper cost control. Six Sigma facilitates the quality management and process controls with methodology to identify the problem and mitigate the same. Therefore, the Six Sigma certificate will enhance my career profile and hence useful for me.

Construction Technology and Management

Dharashree Sahoo it'll be a good certification course

CIVIL ENGINEERING/CONSTRUCTION

TECHNOLOGY AND MANAGEMENT

Ketan Gupta

It will be advantageous for job If you are a Green Belt, it means that you can do project on Six Sigma and use for betterment of a process

Construction Technology and Management

Md Farhan It was a great learning experience.

Chemical

Tejas Sudhir Niphadkar

The certificate will not only be useful as a symbol of my ability, but also it serves as proof for me being able to apply this amazing technique in real life scenario. EEE

Srikar Siddharth Nittala

I need this course and certificate for the following reasons: 1. I needed basics of Six Sigma for my Summer Internship 2. This would help me during my placements 3. I wanted to be certified to carry out or be a part of any Six Sigma project Mechanical Engineering

Shubham Saxena

It will help me to enhance my knowledge in the field of management so that i can use it in my specialization. This certification add more skills into my personality. Additive manufacturing

Ankit Kumar

As a CTM engineer, i am expected to execute the project in cost effective, economical, and timely manner. For reducing the cost, one needs to analyze whole of the process carefully and then make necessary improvements required. So, i think, this certificate will add distinction in my career.

Construction Technology and Management

Bharath Krishna K

I am a Masters aspirant in Industrial Engineering and at this point of my career I think this course helped me develop a perspective on what really matters in the Industry and that is of enormous value to me.

Metallurgical and Materials Engineering

B. Krishna Chaitanya

This certificate will be very useful for me as it will be an added bonus during internships and placements and it will help me participate in six sigma projects.

Electronics and Communication Engineering

SHIV SUNDAR JAWAHAR

It has helped me gain a new insight at the uses of statics and the way they can be used to make methodology decision. I have learned the usage of six sigma methodology in new project and upgrading the existing ones.

Electronics and Communication Engineering

SPANDAN PANDEY It will be very much useful for me.

Mechanical

RAHUL PATRO 1.helpful for black belt 2.helpful in managing task

EEE

Noah Jacob Kaleekkal

I believe this certificate will be a major boost for my CV. More importantly, i hope to use the concepts and techniques learnt in this course in my place of work to attain better results. The faculty for the seminar was excellent. EEE

Anamika Pandey

Far from being just an addition to my resume, the certificate's value was quadrupled to say the least because it is as important to me as is experience to someone looking out for a job for the first time. In a world which is uber-competitive, with dozens of candidates for every single opportunity, the course and by extension the certificate provides me with a razor sharp edge and helps me differentiate myself from the crowd. The course was so well structured and presented that I'm stoked to carry on in the field. Biotechnology

Alok Kumar Singh

This would certify about the stuff I've learned and give me an edge for proving my qualification

Chemical Engineering

Nishit Sudhir Patel

It will be a lot useful when i go for job interviews and will help me in my resume. Most of the companies follow six sigma, so it will be really helpful for me in the near future. Chemical

Aditya Kumar Somani

This will provide me an edge over other candidates during placements and in my engineering career. Along with the knowledge I got, this certificate is the proof of authenticity of my claim of having green belt. Chemical Engineering

Pooja Kumari

I believe this certificate will be helpful in many ways. Being a Chemical Engineering student, what we have learnt from 'KPMG Six sigma' can help a lot in optimizing and better modelling of the process in my core field, to increase product output. ThIs course has taught me to think more deeply when analyzing the problem or situation in hand. Moreover even if I incline towards non core job in future I would be able to better handle the situation by the techniques taught to us. Chemical Engineering

Adithya Manoj Kumar

This certificate will be off much importance for me. Being a chemical engineering student, my work profile in the future will mostly be industrial based, where implementation of a six sigma strategy is essential. This certificate will be a very useful supplement to my resume. Chemical Engineering

Nemalipuri Rajesh kumar six sigma is crux of my subject for quality and safety management

Construction technology and management

Milan Georgy Thomas

This certificate will be a major boost to my resume.This certificate will be useful for me as it will help me participate in six sigma projects. Chemical Engineering

BANDARU SAI VISHNU

This is really a very useful certificate. The workshop went really well, learnt many new things. So I personally feel, this is going to be useful for me. Civil Engineering

Aditya Sarjak Kantha

I assume that this certificate would help me to attend the 6 sigma black belt program and learn this concept futher, after which I could use these techniques in my own projects like my current projects which are 'smokeless chula' and 'heat integration of distilation column'. Chemical Engineering

Mangu Pratyusha

This certificate is going to be very useful for me as i can implement these techniques in my future projects and make them more efficient. Civil

Virendra Kanaujia

Through this certificate course, I have gained better understanding about quality and cost reduction. Using these tools I can reduce construction duration, it will help me in identifying major wastes, delays, defects and reworks. These tools can be used to ensure better control and improvement of quality. Overall investment can be reduced.

Construction Technology and Management

Siddharth Thakur

The experience of the course was greater than my expectation. Amazing faculty as well!

Electronics and Communication Engineering

SHOHINI GHOSH

Six Sigma training has prepared me for a leadership role. It has enhanced my management skill which I'll be using throughout my career. This certification will definitely build up my resume and set me apart from my competitors. ELECTRICAL AND ELECTRONICS

Bhargavi Nannapuraju

This certificate will be useful in the long run of my career and also the knowledge will help me solve typical problems in the industry I'll work in future.

Computer Science and Engineering / BTech

Akash Srivastava This certificate would be very useful to me. CSE

Bairi Akshara Priya

Myself being an MBA graduate specialized in Hr and Marketing, Training in Six Sigma helps me in building a competency model, creating job descriptions and in developing retention strategies. I believe Six Sigma is a integrated quality improvement framework.

MBA (HR and Marketing)

Kanishk Bhatia

Without a relevant project where the learnt skills are put into use, the certificate for a 4-day course doesn't hold much value, in my opinion.

Mechanical Engineering

Sree Sai Laxmi This certificate has a great value in life. It stands out in the resume.

Civil/BTECH