Feed Tray Installation Manual OKI C301 A4 Booklet

7/23/2019 Feed Tray Installation Manual OKI C301 A4 Booklet

http://slidepdf.com/reader/full/feed-tray-installation-manual-oki-c301-a4-booklet 1/12

© Curtis Consulting 2011

© LG Systems 2011




© LG Systems 2011

To install the feed tray for material to go into the

printer, make sure the feed tray you are installing is

compatible with your printer.




© LG Systems 2011

Then, pull out the tray where the material

to be printed on goes in.



Remove the small feeder in the tray by

pulling it out along with the small thin bar

attached to it.


© LG Systems 2011




© LG Systems 2011

Push in the blue button to release part of the

printer tray, and slot the left hand notch on

the feed tray in slightly.




© LG Systems 2011

Bend the feed tray in the middle so you can slot

the right hand notch into the slot. Once you

have slotted both notches in, push the feed tray

as far as it will go.




© LG Systems 2011

When it is fully slotted in, push down the re-

leased part to click it back into place, securing

the feed tray.

Feed Tray Installation Manual OKI C301 A4 Booklet

Documents

Transcript of Feed Tray Installation Manual OKI C301 A4 Booklet