Feed-through terminal block - PT 1,5/S-TWIN - 3208155 · 2019. 10. 13. · Feed-through terminal...
Transcript of Feed-through terminal block - PT 1,5/S-TWIN - 3208155 · 2019. 10. 13. · Feed-through terminal...
https://www.phoenixcontact.com/gb/products/3208155
07/04/2019 Page 1 / 27
Feed-through terminal block - PT 1,5/S-TWIN - 3208155Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user'sdocumentation. Our General Terms of Use for Downloads are valid(http://phoenixcontact.com/download)
Feed-through terminal block, nom. voltage: 500 V, nominal current: 17.5 A, connection method: Push-inconnection, number of connections: 3, cross section: 0.14 mm² - 1.5 mm², AWG: 26 - 14, width: 3.5 mm,height: 30.5 mm, color: gray, mounting type: NS 35/7,5, NS 35/15
Your advantages
The Push-in connection terminal blocks are characterized by the system features of the CLIPLINE complete system and by easy and tool-freewiring of conductors with ferrules or solid conductors
The compact design and front connection enable wiring in a confined space
In addition to the testing facility in the double function shaft, all terminal blocks provide an additional test connection
Tested for railway applications
Key Commercial DataPacking unit 50 pc
Minimum order quantity 50 pc
GTIN
GTIN 4046356564342
Weight per Piece (excluding packing) 4.480 g
Custom tariff number 85369010
Country of origin Germany
Note Made to Order (non-returnable)
Technical data
GeneralNumber of levels 1
Number of connections 3
Potentials 1
Nominal cross section 1.5 mm²
Color gray
Insulating material PA
https://www.phoenixcontact.com/gb/products/3208155
07/04/2019 Page 2 / 27
Feed-through terminal block - PT 1,5/S-TWIN - 3208155Technical data
GeneralFlammability rating according to UL 94 V0
Area of application Railway industry
Machine building
Plant engineering
Rated surge voltage 6 kV
Degree of pollution 3
Overvoltage category III
Insulating material group I
Maximum power dissipation for nominal condition 0.56 W
Maximum load current 17.5 A
Nominal current IN 17.5 A
Nominal voltage UN 500 V
Open side panel Yes
Shock protection test specification DIN EN 50274 (VDE 0660-514):2002-11
Back of the hand protection guaranteed
Finger protection guaranteed
Result of surge voltage test Test passed
Surge voltage test setpoint 7.3 kV
Result of power-frequency withstand voltage test Test passed
Power frequency withstand voltage setpoint 1.89 kV
Result of the test for mechanical stability of terminal points (5 xconductor connection) Test passed
Result of bending test Test passed
Bending test rotation speed 10 rpm
Bending test turns 135
Bending test conductor cross section/weight 0.14 mm² / 0.2 kg
1.5 mm² / 0.4 kg
Tensile test result Test passed
Conductor cross section tensile test 0.14 mm²
Tractive force setpoint 10 N
Conductor cross section tensile test 1.5 mm²
Tractive force setpoint 40 N
Result of tight fit on support Test passed
Tight fit on carrier NS 35
Setpoint 1 N
Result of voltage-drop test Test passed
Requirements, voltage drop ≤ 3.2 mV
Result of temperature-rise test Test passed
Short circuit stability result Test passed
Conductor cross section short circuit testing 1.5 mm²
Short-time current 0.18 kA
https://www.phoenixcontact.com/gb/products/3208155
07/04/2019 Page 3 / 27
Feed-through terminal block - PT 1,5/S-TWIN - 3208155Technical data
GeneralResult of thermal test Test passed
Ageing test for screwless modular terminal block temperature cycles 192
Proof of thermal characteristics (needle flame) effective duration 30 s
Result of aging test Test passed
Oscillation, broadband noise test result Test passed
Test specification, oscillation, broadband noise DIN EN 50155 (VDE 0115-200):2008-03
Test spectrum Service life test category 2, bogie-mounted
Test frequency f1 = 5 Hz to f2 = 250 Hz
ASD level 6.12 (m/s2)2/Hz
Acceleration 3.12 g
Test duration per axis 5 h
Test directions X-, Y- and Z-axis
Shock test result Test passed
Test specification, shock test DIN EN 50155 (VDE 0115-200):2008-03
Shock form Half-sine
Acceleration 30g
Shock duration 18 ms
Number of shocks per direction 3
Test directions X-, Y- and Z-axis (pos. and neg.)
Relative insulation material temperature index (Elec., UL 746 B) 130 °C
Temperature index of insulation material (DIN EN 60216-1 (VDE0304-21)) 130 °C
Static insulating material application in cold -60 °C
Behavior in fire for rail vehicles (DIN 5510-2) Test passed
Flame test method (DIN EN 60695-11-10) V0
Oxygen index (DIN EN ISO 4589-2) >32 %
NF F16-101, NF F10-102 Class I 2
NF F16-101, NF F10-102 Class F 2
Surface flammability NFPA 130 (ASTM E 162) passed
Specific optical density of smoke NFPA 130 (ASTM E 662) passed
Smoke gas toxicity NFPA 130 (SMP 800C) passed
Calorimetric heat release NFPA 130 (ASTM E 1354) 28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3
DimensionsWidth 3.5 mm
End cover width 2.2 mm
Length 54 mm
https://www.phoenixcontact.com/gb/products/3208155
07/04/2019 Page 4 / 27
Feed-through terminal block - PT 1,5/S-TWIN - 3208155Technical data
DimensionsHeight 30.5 mm
Height NS 35/7,5 32 mm
Height NS 35/15 39.5 mm
Connection dataConnection method Push-in connection
Stripping length 8 mm ... 10 mm
Connection in acc. with standard IEC 60947-7-1
Conductor cross section solid min. 0.14 mm²
Conductor cross section solid max. 1.5 mm²
Conductor cross section AWG min. 26
Conductor cross section AWG max. 14
Conductor cross section flexible min. 0.14 mm²
Conductor cross section flexible max. 1.5 mm²
Min. AWG conductor cross section, flexible 26
Max. AWG conductor cross section, flexible 14
Conductor cross section flexible, with ferrule without plastic sleeve min. 0.14 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max. 1.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min. 0.14 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max. 1 mm² Using the AI-S 1-8 TQ ferrule, Order No. 1200293, isrecommended
Internal cylindrical gage A1 / B1
Standards and RegulationsConnection in acc. with standard CSA
IEC 60947-7-1
Flammability rating according to UL 94 V0
Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3
Environmental Product ComplianceChina RoHS Environmentally friendly use period: unlimited = EFUP-e
No hazardous substances above threshold values
Drawings
Circuit diagram
https://www.phoenixcontact.com/gb/products/3208155
07/04/2019 Page 5 / 27
Feed-through terminal block - PT 1,5/S-TWIN - 3208155Classifications
eCl@ss
eCl@ss 4.0 27141121
eCl@ss 4.1 27141121
eCl@ss 5.0 27141125
eCl@ss 5.1 27141100
eCl@ss 6.0 27141100
eCl@ss 7.0 27141120
eCl@ss 8.0 27141120
eCl@ss 9.0 27141120
ETIM
ETIM 4.0 EC000897
ETIM 5.0 EC000897
ETIM 6.0 EC000897
ETIM 7.0 EC000897
UNSPSC
UNSPSC 6.01 30211811
UNSPSC 7.0901 39121410
UNSPSC 11 39121410
UNSPSC 12.01 39121410
UNSPSC 13.2 39121410
Approvals
Approvals
Approvals
CSA / BV / GL / LR / NK / ABS / UL Recognized / cUL Recognized / IECEE CB Scheme / VDE Zeichengenehmigung / EAC / EAC / cULusRecognized
Ex Approvals
EAC Ex / IECEx / ATEX / EAC Ex
Approval details
CSA http://www.csagroup.org/services-industries/product-listing/ 13631
B C D
Nominal voltage UN 300 V 300 V 600 V
Nominal current IN 15 A 15 A 5 A
https://www.phoenixcontact.com/gb/products/3208155
07/04/2019 Page 6 / 27
Feed-through terminal block - PT 1,5/S-TWIN - 3208155Approvals B C D
mm²/AWG/kcmil 26-14 26-14 26-14
BV http://www.veristar.com/portal/veristarinfo/generalinfo/approved/approvedProducts/equipmentAndMaterials 39980/A0 BV
GL https://approvalfinder.dnvgl.com/ 2040111 HH
LR http://www.lr.org/en 12/20038 (E3)
NK http://www.classnk.or.jp/hp/en/ 14ME0912
ABS http://www.eagle.org/eagleExternalPortalWEB/ 16-HG1591536-PDA
UL Recognized http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 60425
B C D
Nominal voltage UN 300 V 300 V 600 V
Nominal current IN 15 A 15 A 5 A
mm²/AWG/kcmil 26-14 26-14 26-14
cUL Recognized http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 60425
B C D
Nominal voltage UN 300 V 300 V 600 V
Nominal current IN 15 A 15 A 5 A
mm²/AWG/kcmil 26-14 26-14 26-14
IECEE CB Scheme http://www.iecee.org/ DE1-53792_M1
Nominal voltage UN 500 V
mm²/AWG/kcmil 0.14-1.5
https://www.phoenixcontact.com/gb/products/3208155
07/04/2019 Page 7 / 27
Feed-through terminal block - PT 1,5/S-TWIN - 3208155Approvals
VDE Zeichengenehmigung http://www2.vde.com/de/Institut/Online-Service/VDE-gepruefteProdukte/Seiten/Online-Suche.aspx 40039739
Nominal voltage UN 500 V
Nominal current IN 17.5 A
mm²/AWG/kcmil 0.14-1.5
EAC EAC-Zulassung
EAC RU C-DE.AI30.B.01102
cULus Recognized
Accessories
Accessories
Crimping tool
Crimping pliers - CRIMPFOX CENTRUS 6S - 1213144
Crimping pliers, for uninsulated and insulated ferrules, DIN 46228 Part 1 and 4, from 0.14 mm² … 6 mm², also forTWIN ferrules up to 2 x 4 mm², automatic cross section adjustment, lateral insertion, equipped with fall protection
Crimping pliers - CRIMPFOX CENTRUS 10S - 1213154
Crimping pliers, for uninsulated and insulated ferrules, DIN 46228 Part 1 and 4, from 0.14 mm² ... 10 mm², also forTWIN ferrules up to 2 x 4 mm², automatic cross section adjustment, lateral insertion, equipped with fall protection
https://www.phoenixcontact.com/gb/products/3208155
07/04/2019 Page 8 / 27
Feed-through terminal block - PT 1,5/S-TWIN - 3208155Accessories
Crimping pliers - CRIMPFOX CENTRUS 6H - 1213146
Crimping pliers, for uninsulated and insulated ferrules, DIN 46228 Part 1 and 4, from 0.14 mm² … 6 mm², also forTWIN ferrules up to 2 x 4 mm², automatic cross section adjustment, lateral insertion, equipped with fall protection
Crimping pliers - CRIMPFOX CENTRUS 10H - 1213156
Crimping pliers, for uninsulated and insulated ferrules, DIN 46228 Part 1 and 4, from 0.14 mm² ... 10 mm², also forTWIN ferrules up to 2 x 4 mm², automatic cross section adjustment, lateral insertion, equipped with fall protection
Crimping pliers - CRIMPFOX 10S - 1212045
Crimping pliers, for ferrules without insulating collar according to DIN 46228 Part 1 and ferrules with insulating collaraccording to DIN 46228 Part 4, 0.14 mm² ... 10 mm², unlockable pressure lock, lateral entry
Crimping pliers - CRIMPFOX 6H - 1212046
Crimping pliers, for ferrules without insulating collar according to DIN 46228 Part 1 and ferrules with insulating collaraccording to DIN 46228 Part 4, 0.14 mm² ... 6 mm², unlockable pressure lock, lateral entry
Crimping pliers - CRIMPFOX 2,5-M - 1212719
Crimping pliers, for ferrules without insulating collar according to DIN 46228 Part 1 and ferrules with insulating collaraccording to DIN 46228 Part 4, 0.25 mm² ... 2.5 mm², lateral entry, trapezoidal crimp
https://www.phoenixcontact.com/gb/products/3208155
07/04/2019 Page 9 / 27
Feed-through terminal block - PT 1,5/S-TWIN - 3208155Accessories
Crimping pliers - CRIMPFOX 6-M - 1212720
Crimping pliers, for ferrules without insulating collar according to DIN 46228 Part 1 and ferrules with insulating collaraccording to DIN 46228 Part 4, 0.25 mm² ... 6.0 mm², lateral entry, trapezoidal crimp
Crimping pliers - CRIMPFOX 6 - 1212034
Crimping pliers, for ferrules without insulating collar according to DIN 46228 Part 1 and ferrules with insulating collaraccording to DIN 46228 Part 4, 0.25 mm² ... 6.0 mm², lateral entry, trapezoidal crimp
Crimping pliers - CRIMPFOX 6T - 1212037
Crimping pliers, for ferrules without insulating collar according to DIN 46228 Part 1 and ferrules with insulating collaraccording to DIN 46228 Part 4, 0.25 mm² ... 6 mm², lateral entry, trapezoidal crimp
Crimping pliers - CRIMPFOX 6T-F - 1212038
Crimping pliers, for ferrules without insulating collar according to DIN 46228 Part 1 and ferrules with insulating collaraccording to DIN 46228 Part 4, 0.25 mm² ... 6 mm², front entry, trapezoidal crimp
Crimping pliers - CRIMPFOX 6S-F - 1212043
Crimping pliers, for ferrules without insulating collar according to DIN 46228 Part 1 and ferrules with insulating collaraccording to DIN 46228 Part 4, 0.5 mm² ... 6 mm², front entry, square crimp
https://www.phoenixcontact.com/gb/products/3208155
07/04/2019 Page 10 / 27
Feed-through terminal block - PT 1,5/S-TWIN - 3208155Accessories
Crimping pliers - CRIMPFOX-M - 1212072
Basic pliers, for accommodating dies for a wide range of type of contacts
DIN rail
DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733
DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized,passivated with a thick layer, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/ 7,5 UNPERF 2000MM - 0801681
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized,passivated with a thick layer, length: 2000 mm, color: silver
DIN rail perforated - NS 35/ 7,5 WH PERF 2000MM - 1204119
DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, Galvanized,white passivated, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/ 7,5 WH UNPERF 2000MM - 1204122
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, Galvanized,white passivated, length: 2000 mm, color: silver
https://www.phoenixcontact.com/gb/products/3208155
07/04/2019 Page 11 / 27
Feed-through terminal block - PT 1,5/S-TWIN - 3208155Accessories
DIN rail, unperforated - NS 35/ 7,5 AL UNPERF 2000MM - 0801704
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Aluminum,uncoated, length: 2000 mm, color: silver
DIN rail perforated - NS 35/ 7,5 ZN PERF 2000MM - 1206421
DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized,length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/ 7,5 ZN UNPERF 2000MM - 1206434
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized,length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/ 7,5 CU UNPERF 2000MM - 0801762
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Copper, uncoated,length: 2000 mm, color: copper-colored
End cap - NS 35/ 7,5 CAP - 1206560
DIN rail end piece, for DIN rail NS 35/7.5
https://www.phoenixcontact.com/gb/products/3208155
07/04/2019 Page 12 / 27
Feed-through terminal block - PT 1,5/S-TWIN - 3208155Accessories
DIN rail perforated - NS 35/15 PERF 2000MM - 1201730
DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized,passivated with a thick layer, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/15 UNPERF 2000MM - 1201714
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel,galvanized, passivated with a thick layer, length: 2000 mm, color: silver
DIN rail perforated - NS 35/15 WH PERF 2000MM - 0806602
DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, Galvanized,white passivated, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/15 WH UNPERF 2000MM - 1204135
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel,Galvanized, white passivated, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/15 AL UNPERF 2000MM - 1201756
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Aluminum,uncoated, length: 2000 mm, color: silver
https://www.phoenixcontact.com/gb/products/3208155
07/04/2019 Page 13 / 27
Feed-through terminal block - PT 1,5/S-TWIN - 3208155Accessories
DIN rail perforated - NS 35/15 ZN PERF 2000MM - 1206599
DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized,length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/15 ZN UNPERF 2000MM - 1206586
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel,galvanized, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/15 CU UNPERF 2000MM - 1201895
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Copper,uncoated, length: 2000 mm, color: copper-colored
End cap - NS 35/15 CAP - 1206573
DIN rail end piece, for DIN rail NS 35/15
DIN rail, unperforated - NS 35/15-2,3 UNPERF 2000MM - 1201798
DIN rail, unperforated, Standard profile 2.3 mm, width: 35 mm, height: 15 mm, acc. to EN 60715, material: Steel,galvanized, passivated with a thick layer, length: 2000 mm, color: silver
Documentation
https://www.phoenixcontact.com/gb/products/3208155
07/04/2019 Page 14 / 27
Feed-through terminal block - PT 1,5/S-TWIN - 3208155Accessories
Mounting material - PT-IL - 3208090
Operating decal for the push-in Technology
End block
End clamp - E/UK - 1201442
End clamp, width: 9.5 mm, height: 35.3 mm, material: PA, length: 50.5 mm, Mounting on a DIN rail NS 32 or NS 35,color: gray
End clamp - E/UK 1 - 1201413
End clamps, for supporting the ends of double-level and three-level terminal blocks, width: 10 mm, color: gray
End clamp - CLIPFIX 35 - 3022218
Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color:gray
End clamp - CLIPFIX 35-5 - 3022276
Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, with parking option forFBS...5, FBS...6, KSS 5, KSS 6, width: 5.15 mm, color: gray
https://www.phoenixcontact.com/gb/products/3208155
07/04/2019 Page 15 / 27
Feed-through terminal block - PT 1,5/S-TWIN - 3208155Accessories
End clamp - E/NS 35 N - 0800886
End clamp, width: 9.5 mm, color: gray
End cover
End cover - D-PT 1,5/S-TWIN - 3208184
End cover, length: 54 mm, width: 2.2 mm, height: 24.3 mm, color: gray
End cover - D-PT 1,5/S-TWIN-0,8 OG - 1029571
End cover, length: 54 mm, width: 0.8 mm, height: 24.3 mm, color: orange
Front adapter
Front adapters - VIP-PA-PWR/20XOE/ 1,0M/S7 - 2904724
VIP power cabling, universal front adapter for connection to all popular 20-pos. SIMATIC S7-300 I/O modules, via 20individual wires in rope structure, not assembled (field connection, e.g., via 20 modular terminal blocks), cable length:1 m
Front adapters - VIP-PA-PWR/20XOE/ 2,0M/S7 - 2904725
VIP power cabling, universal front adapter for connection to all popular 20-pos. SIMATIC S7-300 I/O modules, via 20individual wires in rope structure, not assembled (field connection, e.g., via 20 modular terminal blocks), cable length:2 m
https://www.phoenixcontact.com/gb/products/3208155
07/04/2019 Page 16 / 27
Feed-through terminal block - PT 1,5/S-TWIN - 3208155Accessories
Front adapters - VIP-PA-PWR/20XOE/ 3,0M/S7 - 2904726
VIP power cabling, universal front adapter for connection to all popular 20-pos. SIMATIC S7-300 I/O modules, via 20individual wires in rope structure, not assembled (field connection, e.g., via 20 modular terminal blocks), cable length:3 m
Front adapters - VIP-PA-PWR/20XOE/10,0M/S7 - 2904730
VIP power cabling, universal front adapter for connection to all popular 20-pos. SIMATIC S7-300 I/O modules, via 20individual wires in rope structure, not assembled (field connection, e.g., via 20 modular terminal blocks), cable length:10 m
Front adapters - VIP-PA-PWR/40XOE/ 1,0M/S7 - 2904731
VIP power cabling, universal front adapter for connection to all popular 40-pos. SIMATIC S7-300 I/O modules, via 40individual wires in rope structure, not assembled (field connection, e.g., via 40 modular terminal blocks), cable length:1 m
Front adapters - VIP-PA-PWR/40XOE/ 2,0M/S7 - 2904732
VIP power cabling, universal front adapter for connection to all popular 40-pos. SIMATIC S7-300 I/O modules, via 40individual wires in rope structure, not assembled (field connection, e.g., via 40 modular terminal blocks), cable length:2 m
Front adapters - VIP-PA-PWR/40XOE/ 3,0M/S7 - 2904733
VIP power cabling, universal front adapter for connection to all popular 40-pos. SIMATIC S7-300 I/O modules, via 40individual wires in rope structure, not assembled (field connection, e.g., via 40 modular terminal blocks), cable length:3 m
https://www.phoenixcontact.com/gb/products/3208155
07/04/2019 Page 17 / 27
Feed-through terminal block - PT 1,5/S-TWIN - 3208155Accessories
Front adapters - VIP-PA-PWR/40XOE/10,0M/S7 - 2904737
VIP power cabling, universal front adapter for connection to all popular 40-pos. SIMATIC S7-300 I/O modules, via 40individual wires in rope structure, not assembled (field connection, e.g., via 40 modular terminal blocks), cable length:10 m
Insulating sleeve
Insulating sleeve - MPS-IH WH - 0201663
Insulating sleeve, color: white
Insulating sleeve - MPS-IH RD - 0201676
Insulating sleeve, color: red
Insulating sleeve - MPS-IH BU - 0201689
Insulating sleeve, color: blue
Insulating sleeve - MPS-IH YE - 0201692
Insulating sleeve, color: yellow
https://www.phoenixcontact.com/gb/products/3208155
07/04/2019 Page 18 / 27
Feed-through terminal block - PT 1,5/S-TWIN - 3208155Accessories
Insulating sleeve - MPS-IH GN - 0201702
Insulating sleeve, color: green
Insulating sleeve - MPS-IH GY - 0201728
Insulating sleeve, color: gray
Insulating sleeve - MPS-IH BK - 0201731
Insulating sleeve, color: black
Jumper
Plug-in bridge - FBS 2-3,5 - 3213014
Plug-in bridge, pitch: 3.5 mm, number of positions: 2, color: red
Plug-in bridge - FBS 3-3,5 - 3213027
Plug-in bridge, pitch: 3.5 mm, number of positions: 3, color: red
https://www.phoenixcontact.com/gb/products/3208155
07/04/2019 Page 19 / 27
Feed-through terminal block - PT 1,5/S-TWIN - 3208155Accessories
Plug-in bridge - FBS 4-3,5 - 3213030
Plug-in bridge, pitch: 3.5 mm, number of positions: 4, color: red
Plug-in bridge - FBS 5-3,5 - 3213043
Plug-in bridge, pitch: 3.5 mm, number of positions: 5, color: red
Plug-in bridge - FBS 10-3,5 - 3213056
Plug-in bridge, pitch: 3.5 mm, number of positions: 10, color: red
Plug-in bridge - FBS 20-3,5 - 3213069
Plug-in bridge, pitch: 3.5 mm, number of positions: 20, color: red
Plug-in bridge - FBS 2-3,5 BU - 3213086
Plug-in bridge, pitch: 3.5 mm, number of positions: 2, color: blue
https://www.phoenixcontact.com/gb/products/3208155
07/04/2019 Page 20 / 27
Feed-through terminal block - PT 1,5/S-TWIN - 3208155Accessories
Plug-in bridge - FBS 3-3,5 BU - 3213099
Plug-in bridge, pitch: 3.5 mm, number of positions: 3, color: blue
Plug-in bridge - FBS 4-3,5 BU - 3213109
Plug-in bridge, pitch: 3.5 mm, number of positions: 4, color: blue
Plug-in bridge - FBS 5-3,5 BU - 3213112
Plug-in bridge, pitch: 3.5 mm, number of positions: 5, color: blue
Plug-in bridge - FBS 10-3,5 BU - 3213125
Plug-in bridge, pitch: 3.5 mm, number of positions: 10, color: blue
Plug-in bridge - FBS 20-3,5 BU - 3213138
Plug-in bridge, pitch: 3.5 mm, number of positions: 20, color: blue
https://www.phoenixcontact.com/gb/products/3208155
07/04/2019 Page 21 / 27
Feed-through terminal block - PT 1,5/S-TWIN - 3208155Accessories
Plug-in bridge - FBS 2-3,5 GY - 3213153
Plug-in bridge, pitch: 3.5 mm, number of positions: 2, color: gray
Plug-in bridge - FBS 3-3,5 GY - 3213167
Plug-in bridge, pitch: 3.5 mm, number of positions: 3, color: gray
Plug-in bridge - FBS 4-3,5 GY - 3213180
Plug-in bridge, pitch: 3.5 mm, number of positions: 4, color: gray
Plug-in bridge - FBS 5-3,5 GY - 3213183
Plug-in bridge, pitch: 3.5 mm, number of positions: 5, color: gray
Plug-in bridge - FBS 10-3,5 GY - 3213196
Plug-in bridge, pitch: 3.5 mm, number of positions: 10, color: gray
https://www.phoenixcontact.com/gb/products/3208155
07/04/2019 Page 22 / 27
Feed-through terminal block - PT 1,5/S-TWIN - 3208155Accessories
Plug-in bridge - FBS 20-3,5 GY - 3213206
Plug-in bridge, pitch: 3.5 mm, number of positions: 20, color: gray
Labeled terminal marker
Zack marker strip - ZB 3,5 CUS - 0829415
Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snapinto tall marker groove, for terminal block width: 3.5 mm, lettering field size: 3.5 x 10.5 mm
Zack marker strip - ZB 3,5,LGS:FORTL.ZAHLEN - 0801404
Zack marker strip, Strip, white, labeled, printed horizontally: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 91 ...100, mounting type: snap into tall marker groove, for terminal block width: 3.5 mm, lettering field size: 3.5 x 10.5 mm
Zack marker strip - ZB 3,5,QR:FORT.ZAHLEN - 0801405
Zack marker strip, Strip, white, labeled, Printed vertically: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 91 ... 100,mounting type: snap into tall marker groove, for terminal block width: 3.5 mm, lettering field size: 3.5 x 10.5 mm
Marker for terminal blocks - UCT-TM 3,5 CUS - 0829581
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mountingtype: snap into tall marker groove, for terminal block width: 3.5 mm, lettering field size: 2.95 x 10.5 mm
https://www.phoenixcontact.com/gb/products/3208155
07/04/2019 Page 23 / 27
Feed-through terminal block - PT 1,5/S-TWIN - 3208155Accessories
Zack Marker strip, flat - ZBF 3,5 CUS - 0829394
Zack Marker strip, flat, can be ordered: Strip, white, labeled according to customer specifications, mounting type:snap into flat marker groove, for terminal block width: 3.5 mm, lettering field size: 3.5 x 5.2 mm
Zack Marker strip, flat - ZBF 3,5,LGS:FORTL.ZAHLEN - 0801406
Zack Marker strip, flat, Strip, white, labeled, printed horizontally: consecutive numbers 1 ... 10, 11 ... 20, etc. up to91 ... 100, mounting type: snap into flat marker groove, for terminal block width: 3.5 mm, lettering field size: 5.15 x 3.5mm
Zack Marker strip, flat - ZBF 3,5,QR:FORTL.ZAHLEN - 0801407
Zack Marker strip, flat, Strip, white, labeled, Printed vertically: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 91 ...100, mounting type: snap into flat marker groove, for terminal block width: 3.5 mm, lettering field size: 5.15 x 3.5 mm
Marker for terminal blocks - UCT-TMF 3,5 CUS - 0829644
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mountingtype: snap into flat marker groove, for terminal block width: 3.5 mm, lettering field size: 2.7 x 4.7 mm
Marker carriers
Group marker label for terminal marking - GBS-ZB/26X6 - 0809298
Group marking label, snaps onto terminal center for screw, spring-cage and quick connection terminal blocks, labeledwith ESL 26x6 mm or EST 25x6 mm, in the foot part with Zack marker strip, length: 29 mm
Partition plate
https://www.phoenixcontact.com/gb/products/3208155
07/04/2019 Page 24 / 27
Feed-through terminal block - PT 1,5/S-TWIN - 3208155Accessories
Partition plate - ATP-ST-TWIN - 3030789
Partition plate, length: 75.2 mm, width: 2 mm, height: 39 mm, color: gray
Spacer plate - DP PS-3,5 - 3031011
Spacer plate, length: 15.9 mm, width: 3.5 mm, height: 33.5 mm, number of positions: 1, color: red
Planning and marking software
Software - CLIP-PROJECT ADVANCED - 5146040
Multilingual software for convenient configuration of Phoenix Contact products on standard DIN rails.
Software - CLIP-PROJECT PROFESSIONAL - 5146053
Multilingual software for terminal strip configuration. A marking module enables the professional marking of markersand labels for identifying terminal blocks, conductors and cables, and devices.
Reducing bridge
Reducing bridge - RB ST (2,5/4)-1,5/S - 3214356
Reducing bridge, pitch: 6.7 mm, length: 22.7 mm, width: 10.4 mm, number of positions: 2, color: red
https://www.phoenixcontact.com/gb/products/3208155
07/04/2019 Page 25 / 27
Feed-through terminal block - PT 1,5/S-TWIN - 3208155Accessories
Reducing bridge - RB ST 6-1,5/S - 3213250
Reducing bridge, pitch: 8 mm, length: 29.9 mm, width: 12.9 mm, number of positions: 2, color: red
Screwdriver tools
Screwdriver - SZF 0-0,4X2,5 - 1204504
Actuation tool, for ST terminal blocks, also suitable for use as a bladed screwdriver, size: 0.4 x 2.5 x 75 mm, 2-component grip, with non-slip grip
Actuation tool - ST-BW 0 - 1200135
Actuation tool, for all 1.5 mm² spring cages from PT 1,5/S and FT 1,5/S
Terminal marking
Zack marker strip - ZB 3,5:UNBEDRUCKT - 0829414
Zack marker strip, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type:snap into tall marker groove, for terminal block width: 3.5 mm, lettering field size: 3.5 x 10.5 mm
Marker for terminal blocks - UCT-TM 3,5 - 0829484
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: TOPMARK NEO, TOPMARK LASER,BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0,THERMOMARK CARD, mounting type: snap into tall marker groove, for terminal block width: 3.5 mm, lettering fieldsize: 2.95 x 10.5 mm
https://www.phoenixcontact.com/gb/products/3208155
07/04/2019 Page 26 / 27
Feed-through terminal block - PT 1,5/S-TWIN - 3208155Accessories
Zack Marker strip, flat - ZBF 3,5:UNBEDRUCKT - 0829392
Zack Marker strip, flat, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type:snap into flat marker groove, for terminal block width: 3.5 mm, lettering field size: 3.5 x 5.2 mm
Marker for terminal blocks - UCT-TMF 3,5 - 0829486
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: TOPMARK NEO, TOPMARK LASER,BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0,THERMOMARK CARD, mounting type: snap into flat marker groove, for terminal block width: 3.5 mm, lettering fieldsize: 2.7 x 4.7 mm
Marker for terminal blocks - TMT (EX9,5)R - 0828295
Marker for terminal blocks, Roll, white, unlabeled, can be labeled with: THERMOMARK ROLL 2.0, THERMOMARKROLL, THERMOMARK ROLL X1, THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2, mounting type:snap into universal marker groove, snap into tall marker groove, for terminal block width: 50000 mm, lettering fieldsize: 9.5 x 50000 mm
Marker for terminal blocks - US-TM 100 - 0829255
Marker for terminal blocks, Card, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID,THERMOMARK PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: snap into universalmarker groove, lettering field size: 104 x 9.8 mm
Test plug terminal block
Test plugs - MPS-MT - 0201744
Test plugs, with solder connection up to 1 mm² conductor cross section, color: gray
https://www.phoenixcontact.com/gb/products/3208155
07/04/2019 Page 27 / 27
Feed-through terminal block - PT 1,5/S-TWIN - 3208155Accessories
Test plugs - PS-3,5 - 3031010
Test plugs, color: red
Test plugs - PS-3,5/E - 3031012
Test plugs, color: red
Phoenix Contact 2019 © - all rights reservedhttp://www.phoenixcontact.com