FEATURING: • 2013 CNC VERTICAL TURNING … · C300 Power Wave Arc Welder, digital, S/N:...
-
Upload
truongdiep -
Category
Documents
-
view
214 -
download
0
Transcript of FEATURING: • 2013 CNC VERTICAL TURNING … · C300 Power Wave Arc Welder, digital, S/N:...
ONLINE BIDDING ENDS: Thursday, November 30th, 2017 at 1:00 p.m.INSPECTIONS: Tuesday, November 28th & Wednesday, November 29th from 8:00 a.m. to 4:00 p.m.
To Register For This Auction, Please Visit www.kosterindustries.com
ONLINE ONLYAUCTION
GE CapitalJim Hanley, Equipment Remarketing Servicesyy83 Wooster Heights Rd., Danbury, CT 06810P. 203-546-4491 E:[email protected]
Under Management of:ASSOCIATION OFMACHINERY AND
EQUIPMENT APPRAISERSCorporate Office:40 Daniel Street, Ste 2Farmingdale, NY 11735631-454-1766 Fax: 631-454-1779
Sale Presented By:
www.kosterindustries.com • e-mail: [email protected]
Surplus to the Ongoing Needs of:
GE Oil & Gas1249 SE Evangeline Thruway, Broussard, Louisiana 70518
Online Bidding Through
gewarehouse.com
Bullard Mdl. Cutmaster 74" Vertical Turret Lathe
Beavermatic Mdl. 7X7X10GCBF Furnace
Giddings & Lewis Mdl. VTC2500 CNC Vertical Turning Center
2013
FEATURING:• 2013 CNC VERTICAL TURNING CENTER• VERTICAL TURRET LATHES• HORIZONTAL BORING MILLS• LATHES • FABRICATION & WELDING• FURNACES • INSPECTION • & MORE!
2013
Sale Presented By: Corporate Office: 40 Daniel Street – Suite 2, Farmingdale, NY 11735631-454-1766 • Fax: 631-454-1779Boston Office: 978-474-4442 • Fax: 978-474-4673www.kosterindustries.com • e-mail: [email protected]
CNC VERTICAL TURNING CENTERGiddings & Lewis Mdl. VTC2500 CNC Vertical Turning Center, with Siemens Sinumerik CNC controls, 25-position automatic tool changer, high pressure coolant system, chip conveyor, 98.4" table, max. height from table top to bottom of ram 98.4", ram travel 68.9", S/N: 525-0119-13 (2013). NOTE: Check manufacturer to confirm specifications on this machine.
VERTICAL TURRET LATHESBullard Mdl. Cutmaster 74" Vertical Turret Lathe, chip conveyor, 2.4–90 RPM table speed, (2) Newall DP700 digital readouts, 5-position turret, side head, 74" 4-jaw chuck table, 40HP, Graco Maxi-Monitor lube system, S/N: 28842
Bullard Mdl. Dynatrol 66" Vertical Turret Lathe, chip conveyor, 2.3–83.3 RPM table speed, 5-position turret, side head, 66" 4-jaw chuck table, 75HP, S/N: 32511
Bullard Mdl. Cutmaster 54" Vertical Turret Lathe, chip conveyor, 4.4–160 RPM table speed, (2) Newall DP700 digital readouts, 5-position turret, side head, 54" 4-jaw chuck table, 50HP, S/N: 29449 CNC & MANUAL HORIZONTAL
BORING MILLSGiddings & Lewis CNC Horizontal Boring Mill, 6" spindle, tool changer, 4' x 6' tables, approximate table travel 72" x 84", chip conveyor, Siemens Sinumerik CNC controls, dual tables, approximately 84" vertical travel
Shibaura Mdl. BFT-13C Horizontal Boring Mill, 5" dia. spindle cross table travel, 72" x 63" built-in rotary table, approximately 68" in-and-out table travel, 72" vertical travel, pendant controls, S/N: 2696 (1976)
Shibaura Mdl. BT-10 Horizontal Boring Mill, table-type, Newall DP700 3-axis digital readout, 44" x 49" table, approximate travels: 56" vertical, 56" cross table, 60" in-and-out table, S/N: 610 (1969)
VERTICAL MILLLagun Mdl. FTV-2 Vertical-Type Power Knee Mill, with 10" x 55" servo power feed table, power knee, Newall 3-axis digital readout, 85–4,200 RPM, S/N: 48924
Bullard Mdl. Dynatrol 66" Vertical Turret Lathe
Bullard Mdl. Cutmaster 54" Vertical Turret Lathe 6" Giddings & Lewis CNC Horizontal Boring Mill
Lagun Vertical Milling Machine
Bullard Mdl. Cutmaster 74" Vertical Turret Lathe
TOOL PRESETTERDorian Tool International Mdl. P499PP Tool Presetter, digital, 2-axis, S/N: P06247 (2006)
5" Shibaura Mdl. BFT-13C Horizontal Boring Mill
Under Management of:
GE Capital Jim Hanley, Equipment Remarketing Servicesyy83 Wooster Heights Rd., Danbury, CT 06810P. 203-546-4491 E:[email protected]
FURNACEBeavermatic Mdl. 7X7X10GCBF Furnace, 65,000-lb. capacity, 1,500°F max. temperature, car bottom furnace, quick panelview controls, S/N: 413-97/8 (2013)
LATHESPoreba Mdl. TPK-90A/3M 36" x 130" Geared Head Engine Lathe, 7.1–710 RPM spindle speeds, inch/metric threading, Newall Topaz 2-axis digital readout, 31" dia. 4-jaw chuck, (2) steady rests, S/N: 7402-02-19050-00
Acra Mdl. SET28120 Gap Bed Lathe, 40–1,000 RPM spindle speeds, inch/metric threading, 7" gap, 19" dia. 4-jaw chuck, Newall DP 2-axis digital readout, taper attachment, (2) steady rests
Acra Mdl. 1660TVS Geared Head Engine Lathe, 20–2,500 RPM spindle speeds, 8" dia. 3-jaw chuck, Newall DP700 2-axis digital readout, inch/metric threading, steady rest, taper attachment, S/N: 1611102331 (2011)
Acra Mdl. SET28120 Gap Bed Lathe Acra Mdl. 1660TVS Geared Head Engine Lathe
Beavermatic Mdl. 7X7X10GCBF Furnace
WELDING POSITIONERSVanguard Mdl. P30-F55/2500 Welding Positioner, variable speed, 98" dia. table, 66,000-lb. max. capacity, S/N: W1555010 (2015)
Mdl. HB100 Automatic Welding Positioner, variable speed, 10,000kg (22,000-lb.) max., 78" dia. table, S/N: 480649 (2006)
Bowers Mdl. P15K Welding Positioner, 19,000-lb. max. capacity, 72" dia. table, variable speed, S/N: 880701
40,000-Lb. Capacity Welding Positioner, 72" dia. table, variable speed (no tilt)
10,000-Lb. Capacity Welding Positioner, 42" x 42" table, variable speed (no tilt)
6,000-Lb. Capacity Welding Positioner, 4' x 4' table, variable speed
500-Lb. Capacity Welding Positioner, 20" dia. table, variable speed, S/N: 2551
To Register For This Auction, Please Visit www.kosterindustries.com
WELDERS(3) Miller Dimension 452 CC/CV-DC Welding Power Sources, Miller 22A, and 60 wire feeders, digital, S/N’s: LK360560C; LK240322C; KF952001
Miller Dimension 452 CC/CV-DC Welding Power Source, Miller 24V wire feed, digital, S/N: KG046698
Lincoln Mdl. C300 Power Wave Arc Welder, digital, S/N: U1110107850
Miller Syncrowave 200 Power Source
(2) Miller Mdl. Maxtro 450 CC/CV-DC Arc Welders, Miller 60M Series wire feed, S/N’s: KF870532; KF344519
Bowers Mdl. P15K Welding Positioner
Mdl. HB100 Automatic Welding Positioner
2013
2006
Vanguard Mdl. P30-F55/2500 66,000-Lb. Welding Positioner
2015
2011
ALSO AVAILABLE:• 50-Ton Proserve Spreader Beam
• (20) Brand New Electric Hoists
Sale Presented By: Corporate Office: 40 Daniel Street – Suite 2, Farmingdale, NY 11735631-454-1766 • Fax: 631-454-1779Boston Office: 978-474-4442 • Fax: 978-474-4673www.kosterindustries.com • e-mail: [email protected]
TANK TURNING ROLLSVanguard 88,000-Lb. Capacity Power Tank Turning Rolls, steel wheels, variable speed
(8) Assorted Power Tank Turning Rolls, 5-idlers, including 30-ton Weld wire
WELDING MANIPULATORSPandjiris Mdl. 1000 12' x 10' Welding Manipulator, Lincoln NA-3N wire feed, Lincoln Idealarc DC-1000 power source, S/N: 800-3621-1; U1061112300Bowers Equipment Co. Mdl. BEG-M-10 Welding Manipulator, 10' arm travel, approximately 8' vertical, Lincoln electric DC-655 power source, Lincoln NA-3N auto feed, S/N: 9980506Bowers Equipment Co. Mdl. BEC-10M Welding Manipulator, approximately 10' x 10', Lincoln DC-655 power source, Lincoln NA-3N auto wire feed, S/N: 980505; U1020815116Bowers Equipment Co. Mdl. M6-PB Welding Manipulator, approximately 6' x 6', Lincoln electric DC-655 power source, 800-AMP max., digital, Lincoln NA-3N auto wire feed, S/N: 200552; U1030313517Bowers Equipment Co. Mdl. M4PB Welding Manipulator, approximately 4' x 4', 800-AMP max., Lincoln DC644 power source, digital, Lincoln auto wire feed, S/N: 980736; U1040804997Bowers Equipment Co. Mdl. M4PB Welding Manipulator, approximately 4' x 4', Miller Deltaweld 652 CV.DC power source, SN: 980735; KH310821
PRESSURE TEST BUNKERSRiver Bend Industries Pressure Test Bunker, 7" mandrel, 25,000-PSI, 4" blind flange, 24' wide x 20' deep overall size, dual motorized sliding doors
River Bend Industries Pressure Test Bunker, 12' wide x 10' deep overall size, video recorder and TV screen
River Bend Industries Pressure Test Bunker
River Bend Industries Pressure Test Bunker
Pandjiris Mdl. 1000 12' x 10' Welding Manipulator
Bowers Equipment Co. Mdl. BEG-M-10 Welding Manipulator
HIGH PRESSURE UNITSCAD Control System High Pressure Unit, BOP control unit, 71-gal. power fluid capacity, 5,000-PSI working pressure, (2) Siemens 30HP motors, (2) CAT pumps, gages, valves, controls, S/N: 1113-130185-03 (2013)
CAD Control System High Pressure Unit, 71-gal. power fluid capacity, 30,000-PSI working pressure, Siemens 20HP motors, Hydroplex high pressure pumps, S/N: 1113-130-185-02 (2013)
CAD Control System High Pressure Unit
Faro Quantum Portable Coordinate Measuring Machine
Faro Prime Coordinate Measuring Machine
Faro “Edge” Measuring Arm
PORTABLE COORDINATE MEASURING UNITSFaro Quantum Portable Coordinate Measuring Machine, Faro stand, laser tracker, S/N: Q10-05-10-08372 (2010)
Faro Prime Coordinate Measuring Machine, Faro stand, S/N: R12-02-14-11657 (2014)
Faro “Edge” Measuring Arm, tripod, mounts, S/N: E09-05-15-13545 (2015)
2013
2010 2014 2015
Vanguard 88,000-Lb. Capacity Power Tank Turning Rolls
Under Management of:
GE Capital Jim Hanley, Equipment Remarketing Servicesyy83 Wooster Heights Rd., Danbury, CT 06810P. 203-546-4491 E:[email protected]
Shot Blast BoothJBI Mdl. T-100-WDT-S Truck-Type Paint Booth
1998 1998
Online Bidding Through gewarehouse.com
QUANTITY OF ASSORTED DUST COLLECTORS
PAINT BOOTH – Truck-TypeJBI Mdl. T-100-WDT-S Truck-Type Paint Booth, explosion proof lights, 100' overall length, 25' wide, S/N: 22643 (1998)
SHOT BLAST ROOM Clemco Mdl. 30 x 18 Shot Blast Room, S/N: 99003, Job #395830, with Clemco classic 150 shot blast unit, Pirate brand series blast unit (1998)
Ingersoll Rand Mdl. R75i 75HP Screw-Type Air Compressor
PRESSURE WASHERLanda Mdl. ENG4-30029C Pressure Washer, 3,000-PSI, 3.9 GPM, 240°F max. temperature, S/N: 11098090-000007
HAZARDOUS STORAGE UNITSDenios Hazardous Storage Unit, 16' x 8' overall size
Hazardous Material Storage Container
AIR COMPRESSOR(2) Ingersoll Rand Mdl. R75i 75HP Screw-Type Air Compressors, air dryer, air receiving tank, S/N: VK2226413296; N/A
SHOP SUPPORTINCLUDING: Large Quantity of Lista Parts Cabinets, CNC Tool Holders, 2-Door Steel Storage Cabinet, Self-Dumping Hoppers, Hand Tools, Large Quantity Inspection Items, Material Handling Carts, Jib Arms and Hoists, 2-Wheel Hand Trucks, Drills, Vises, Work Benches, Boring Bars, Inserts, Pallet Jacks, Cutting Tools, Step Ladders, Chain, Nuts and Bolts, Hose Reels,
Shop Vacs, Shop Fans, Eye Bolts, Steel Tables, Lifting Straps, Adjustable Pallet Racks, Portable Bandsaw, Banding Carts and Tools, Etc.
Landa Mdl. ENG4-30029C Pressure Washer Machine
Denios Hazardous Storage Unit
Brand New Electric Chain Hoists
FORKLIFT TRUCKSTCM Mdl. FD7027 14,000-Lb. Capacity Forklift Truck, hydraulic dual front tires, gas operated, S/N: 57907941
TCM Mdl. FB35Z7T/DD 8,000-Lb. Capacity Forklift Truck, hydraulic tires, gas operated, 147.6" max. height, S/N: A24U13882
TCM Mdl. FD35Z7T/DD 7,450-Lb. Capacity Forklift Truck, gas operated, 189" max. height, S/N: A24U14187
Toyota Mdl. 7FGU30 5,600-Lb. Capacity Forklift Truck, hydraulic tires, propane operated, 187" max. height, side shift, S/N: 63636
Toyota ForkliftTCM Forklift TCM Forklift
INSPECTIONS: Tues., Nov. 28th &
Wed., Nov. 29th from 8:00 a.m. to 4:00 p.m.
ONLINE BIDDING ENDS: Thursday, November 30th, 2017 at 1:00 p.m.INSPECTIONS: Tuesday, November 28th & Wednesday, November 29th from 8:00 a.m. to 4:00 p.m.
FEATURING:• 2013 CNC VERTICAL TURNING CENTER • VERTICAL TURRET LATHES • HORIZONTAL BORING MILLS• LATHES • FABRICATION & WELDING • FURNACES • INSPECTION • & MORE!
To Register For This Auction, Please Visit www.kosterindustries.com
Surplus to the Ongoing Needs of:
GE Oil & Gas1249 SE Evangeline Thruway Broussard, Louisiana 70518
ONLINE ONLYAUCTION
GE CapitalJim Hanley, Equipment Remarketing Servicesyy83 Wooster Heights Rd., Danbury, CT 06810P. 203-546-4491 E:[email protected]
Under Management of:ASSOCIATION OFMACHINERY AND
EQUIPMENT APPRAISERSCorporate Office:40 Daniel Street, Ste 2Farmingdale, NY 11735631-454-1766 Fax: 631-454-1779
Sale Presented By:
www.kosterindustries.com • e-mail: [email protected]
Poreba Mdl. TPK-90A/3M36" x 130" Geared Head Engine Lathe
QS-0040280
PresortedFirst Class Mail
U.S. PostagePAID
Eugene, OregonPermit No. 17
AUCTIONEERS • APPRAISERS • LIQUIDATORS40 Daniel Street, Suite 2, Farmingdale, NY 11735631-454-1766 • Fax: 631-454-1779
IMPORTANT NOTICE TO ALL BUYERS REGARDING AUCTION PAYMENT: 17% Buyer’s Premium will apply on all purchases. Payment must be made by certified funds or wire transfer. Company or personal checks will be accepted only if accompanied by a letter from the payor’s bank guaranteeing unqualified payment to Koster Industries Inc. All checks must be made payable to the order of Koster Industries Inc. Direct bank wire transfers to the account of Koster Industries Inc. on balances due will be accepted with prior arrangement. No lot may be removed until complete settlement is made.
IMPORTANT NOTICE: Although information has been obtained from sources deemed reliable, the auctioneer makes no warranty or guarantee, expressed or implied, as to the accuracy of the information herein contained. It is for this reason that buyers should available themselves of the opportunity to make inspection prior to the sale.
IMPORTANT NOTICE: Nothing herein shall be construed as (i) constituting the creation of an agency, partnership, joint venture, fiduciary or similar relationship between GE and any person; (ii) an approval or commitment to sale by GE to any person; and all transactions are subject to final investment/compliance approval by GE and the execution of mutually satisfactory definitive documentation; (iii) any guarantee or promise of pricing terms or availability thereof which may fluctuate or cease to be available depending on any change in the relevant market. All sales of available equipment will be “as is”, “where is”, with all faults, without recourse or warranty of any kind or nature, express or implied; and subject to detailed terms and conditions of sale of the equipment owner/seller.
IMPORTANT NOTICE TO ALL BUYERS REGARDING AUCTION PAYMENT 17% B ’ P i ill IMPORTANT NOTICE N thi h i h ll
Surplus to the Ongoing Needs of: GE Oil & Gas 1249 SE Evangeline Thruway, Broussard, Louisiana 70518
Koster Industries Inc., LA License #AB-184 • Russell M. Koster, LA License #1048
Online Bidding Through
gewarehouse.com
Vanguard Mdl. P30-F55/2500 66,000-Lb. Welding Positioner
2015