FDHMH
1
CE470 Structural Steel Design Spring 2009 Lectures 18-20 Lecture 18, 19: Welds; Examples (Note: reading is the same as for Lecture 16) Reading: Segui: Section 7.11 AISC Manual: J2.2 [from 16.1-95] AISC Manual: Commentary J2.2 [16.1-330] Objectives: Calculate capacity of a welded tension member with consideration for all limit states Lecture 20: Welds; Balanced Connections Reading: Segui: pp. 469 - 472 Objectives: Explain the reason for designing balanced welded connections Explain the method for calculating placement and lengths of welds necessary for a balanced connection Design and detail a balanced connection
-
Upload
diego-moreno -
Category
Documents
-
view
212 -
download
0
Transcript of FDHMH
CE470 Structural Steel Design Spring 2009Lectures 18-20
Lecture 18, 19: Welds; Examples(Note: reading is the same as for Lecture 16)
Reading: Segui: Section 7.11 AISC Manual: J2.2 [from 16.1-95] AISC Manual: Commentary J2.2 [16.1-330]
Objectives: Calculate capacity of a welded tension member with consideration for all limit states
Lecture 20: Welds; Balanced Connections
Reading: Segui: pp. 469 - 472
Objectives: Explain the reason for designing balanced welded connections Explain the method for calculating placement and lengths of welds necessary for a
balanced connection Design and detail a balanced connection