Fault picking exercise Faults often occur in groups.

15
Fault picking exercise Faults often occur in groups

Transcript of Fault picking exercise Faults often occur in groups.

Page 1: Fault picking exercise Faults often occur in groups.

Fault picking exercise

Faults often occur in groups

Page 2: Fault picking exercise Faults often occur in groups.

There are two horizons to interpret and several faults to pick on this seismic profile.

1.Use a lead pencil to mark the first horizon at CMP 980 and TWT 770msec.

2.Follow it across the seismic profile, when you are happy with your interpretation mark it with a coloured pencil.

3.Do the same for the second horizon at CMP 980 and TWT 970msec, using a different colour.

4.Draw on any faults you can see (places where the horizon is broken) in lead pencil.

5.Mark the upthrown and downthrown sides of the fault with arrows.

6. On the seismic data annotate each fault with a letter (A, B, C etc.) and for each one decide if it is normal or reverse fault. Write your answers in a table.

Page 3: Fault picking exercise Faults often occur in groups.

1 km

Page 4: Fault picking exercise Faults often occur in groups.

1 km

Page 5: Fault picking exercise Faults often occur in groups.

1 km

Page 6: Fault picking exercise Faults often occur in groups.

1 km

Page 7: Fault picking exercise Faults often occur in groups.

1 km

↾↾

Page 8: Fault picking exercise Faults often occur in groups.

1 km

↾↾

↾⇂⇂

↾ ↾

↾⇂⇂

Page 9: Fault picking exercise Faults often occur in groups.

Key Points

• A fault is a break in the rocks where movement has occurred

• Whenever a fault experiences tectonic forces movement will occur at the fault

• The amount of movement is called the displacement

• Faults often have a long and complex history

• There is often many separate periods of displacement, each one relating to a different tectonic force

• Normal faults are caused by forces that pull apart – tension

• Reverse faults are caused by forces that push together - compression

Page 10: Fault picking exercise Faults often occur in groups.

1 km

Page 11: Fault picking exercise Faults often occur in groups.

1 km

Page 12: Fault picking exercise Faults often occur in groups.

1 km

Page 13: Fault picking exercise Faults often occur in groups.

1 km

↾↾

Page 14: Fault picking exercise Faults often occur in groups.

1 km

↾↾

↾⇂⇂

↾ ↾

↾⇂⇂

Page 15: Fault picking exercise Faults often occur in groups.

Key Points

• A fault is a break in the rocks where movement has occurred

• Whenever a fault experiences tectonic forces movement will occur at the fault

• The amount of movement is called the displacement

• Faults often have a long and complex history

• There is often many separate periods of displacement, each one relating to a different tectonic force

• Normal faults are caused by forces that pull apart – tension

• Reverse faults are caused by forces that push together - compression