FATTY ULTRA DL 70 FATTY ULTRA DL 70 - JUMP...

42
© 2009 Cannondale Europe • www.cannondale.com FATTY ULTRA DL 70 FATTY ULTRA DL 70 Specifications ID: Tapered alloy inner steerer at crown junction, black top cap, silver hex nut, can have canti mount - disc mount or both, Year 2000-2003 Travel (mm) 70 Damper Oil damped, cartridge Spring element Air sprung, coil negative spring Lockout Button On/Off KITS ITEM NUMBER DESCRIPTION HDUPDD60/ Cartridge Kit, DD60 upgrade HD110/BLU Spring Kit,DD60/MC60, medium HD110/GRE Spring Kit,DD60/MC60, soft HD110/RED Spring Kit,DD60/MC60, stiff RECOMMENDED SAG SAG A B B - A = SAG (mm) Measure the length of the fork as shown below – remember this as measurement A. With the help of a second person, seat the rider on the saddle with feet on pedals and hands on the handlebar. Again measure the length of the fork - remember this as measurement B. To calculate sag subtract B from A . The recommended sag measurement (in millimeters) as a percentage of your forks total travel, should fall within the guidelines listed in the attached chart. To increase sag, release air. To decrease sag, add air. PRESSURE LIMITS MINIMUM - 45 psi (3.1 bar) MAXIMUM - 120 psi (8.3 bar) RECOMMENDED SAG 10-20% = 8mm DIAL

Transcript of FATTY ULTRA DL 70 FATTY ULTRA DL 70 - JUMP...

© 2009 Cannondale Europe • www.cannondale.com

FATTY ULTRA DL 70

FATTY ULTRA DL 70

SpecificationsID: Tapered alloy inner steerer at crown junction, black top cap, silver hex nut, can have canti mount - disc mount or both,

Year 2000-2003

Travel (mm) 70

Damper Oil damped, cartridge

Spring element Air sprung, coil negative spring

Lockout Button On/Off

KITS

ITEM NUMBER DESCRIPTION

HDUPDD60/ Cartridge Kit, DD60 upgrade

HD110/BLU Spring Kit,DD60/MC60, medium

HD110/GRE Spring Kit,DD60/MC60, soft

HD110/RED Spring Kit,DD60/MC60, stiff

RECOMMENDED SAG

SAG

AB

B - A = SAG (mm)

Measure the length of the fork as shown below – remember this as measurement A.

With the help of a second person, seat the rider on the saddle with feet on pedals and hands on the handlebar. Again measure the length of the fork - remember this as measurement B.

To calculate sag subtract B from A .

The recommended sag measurement (in millimeters) as a percentage of your forks total travel, should fall within the guidelines listed in the attached chart.

To increase sag, release air. To decrease sag, add air.

PRESSURE LIMITS MINIMUM - 45 psi (3.1 bar) MAXIMUM - 120 psi (8.3 bar)

RECOMMENDED SAG 10-20% = 8mm

DIAL

© 2009 Cannondale Europe • www.cannondale.com

FATTY ULTRA DL 70

KITS

ITEM NUMBER DESCRIPTION

HD181/ DL 70 oil cartridge unit

HD183/ FT70/DL70 air cartridge

HDUPDL/70 Cartridge kit, DL70 upgrade

HD312/ Kit, Piston, DD60 w/ Seals & Shims

HD313/ Kit, lockout shims/seals DL Cartridge

HD314/ Kit, 5 X negative spring Green DL70

QHDST/EBO Headset Cannondale/Coda HeadShok Black

HD169/ Kit, Bearings, Headset - 2 / HeadShok

HD191/BLK Slim Boot, 5-rib, Black

HD191/YEL Slim Boot, 5-rib, Yellow

HD213/ Lock-Out lever

TOOLS

ITEM NUMBER DESCRIPTION

HD136/ Tool, HeadShok outer cap pin

HDTL149/ Tool, HeadShok fork installation

HDTL168/ Tool, bullet, Lefty and Fatty 12.7 mm

KT016/ Tool, HEADSHOK Bearing Reset

KT020/ Kit, Lefty Steerer install (also for Fattys)

KH031/ Super Castle Tool

© 2009 Cannondale Europe • www.cannondale.com

SUPER FATTY M 80

SUPER FATTY M 80

SpecificationsID: Tapered alloy inner steerer at crown junction, black top cap, can have canti mount - disc mount or both,

Year 1999-2005

Travel (mm) 80

Damper Mechanical damper/Friction

Spring element Coil sprung

Lockout No

Rebound No

KITS

ITEM NUMBER DESCRIPTION

HDUPDL/80 Cartridge Kit, DL80 upgrade

HD182/ DL80 Oil cartridge unit – Formerly DD80 Oil Cartridge

HD184/ FT80/DL80 Air cartridge

RECOMMENDED SAG

SAG

AB

B - A = SAG (mm)

Measure the length of the fork as shown below – remember this as measurement A.

With the help of a second person, seat the rider on the saddle with feet on pedals and hands on the handlebar. Again measure the length of the fork - remember this as measurement B.

To calculate sag subtract B from A .

The recommended sag measurement (in millimeters) as a percentage of your forks total travel, should fall within the guidelines listed in the attached chart.

To increase sag, release air. To decrease sag, add air.

PRESSURE SET UP

Spring preload

DIAL/TOP CAP

© 2009 Cannondale Europe • www.cannondale.com

SUPER FATTY M 80

KITS

ITEM NUMBER DESCRIPTION

QHDST/EBO Headset Cannondale/Coda HeadShok Black

HD169/ Kit, Bearings, Headset - 2/ HeadShok

HD191/BLK Slim Boot, 5-rib, Black

HD191/YEL Slim Boot, 5-rib, Yellow

HD213/ Lockout lever

HD155/BLU Spring Kit, MC80, Medium

HD155/GRE Spring Kit, MC80, Light

HD155/RED Spring Kit, MC80, Stiff

TOOLS

ITEM NUMBER DESCRIPTION

HD136/ Tool, HeadShok outer cap pin

HDTL149/ Tool, HeadShok fork installation

KT016/ Tool, HeadShok bearing reset

KT020/ Kit, Lefty Steerer install (also for Fattys)

KH031/ Super castle tool

© 2009 Cannondale Europe • www.cannondale.com

SUPER FATTY D & DL

SUPER FATTY D & DL

SpecificationsID: Shorter air valve end (ca. 8,5mm), 4 pin spanner holes under lockout dial, tapered inner tube down to crown.

Year 2001-2003

Travel (mm) 80

Damper Oil damped

Spring element Air sprung, coil negative spring

Lockout On the fly

Rebound No

KITS

ITEM NUMBER DESCRIPTION

HDUPDL/80 Cartridge Kit, DL80 upgrade

HD182/ DL80 Oil cartridge unit – Formerly DD80 Oil Cartridge

HD184/ FT80/DL80 Air cartridge

RECOMMENDED SAG

SAG

AB

B - A = SAG (mm)

Measure the length of the fork as shown below – remember this as measurement A.

With the help of a second person, seat the rider on the saddle with feet on pedals and hands on the handlebar. Again measure the length of the fork - remember this as measurement B.

To calculate sag subtract B from A .

The recommended sag measurement (in millimeters) as a percentage of your forks total travel, should fall within the guidelines listed in the attached chart.

To increase sag, release air. To decrease sag, add air.

DIAL

© 2009 Cannondale Europe • www.cannondale.com

SUPER FATTY D & DL

KITS

ITEM NUMBER DESCRIPTION

QHDST/EBO Headset Cannondale/Coda HeadShok Black

HD169/ Kit, Bearings, Headset - 2; HeadShok

HD191/BLK Slim Boot, 5-rib, Black

HD191/YEL Slim Boot, 5-rib, Yellow

HD213/ lockout lever

HDUPDL/80 CARTRIDGE KIT, DL80 UPGRADE

HD182/ DL80 Oil Cartridge Unit – Formerly DD80 Oil Cartridge

HD184/ FT80/DL80 Air Cartridge

HD166/ Seal Kit

HD212 Negative Spring

TOOLS

ITEM NUMBER DESCRIPTION

HD136/ Tool, HeadShok outer cap pin

HDTL149/ Tool, HeadShok fork installation

KT016/ Tool, HeadShok bearing reset

KT020/ Kit, Lefty Steerer install (also for Fattys)

KH031/ Super castle tool

HDTL168/ Bullet tool

© 2009 Cannondale Europe • www.cannondale.com

SUPER FATTY ULTRA DL (Inch thread)

SUPER FATTY ULTRA DL (INCH THREAD)

SpecificationsID: Shorter air valve end (ca. 8,5mm), 4 pin spanner holes under lockout dial, square inner tube down to crown.

Year 2001-2003

Travel (mm) 80

Damper Oil damped

Spring element Air sprung, coil negative spring

Lockout On the fly

Rebound No

KITS

ITEM NUMBER DESCRIPTION

HD155/BLU Spring Kit, MC80, Medium

HD155/GRE Spring Kit, MC80, Light

HD155/RED Spring Kit, MC80, Stiff

RECOMMENDED STARTING AIR PRESSURE

Lbs Kg Psi Bar

120 - 150 68 95 6.6

160 73 110 7.6

170 77 120 8.3

180 82 130 9.0

190 86 135 9.3

200 91 140 9.7

210 95 145 10.0

220 100 150 10.3

PRESSURE LIMITS MINIMUM - 70 psi (4.8 bar) MAXIMUM - 200 psi (13.8 bar)

RECOMMENDED SAG 10-20% = 8 mm

DIAL VALVE

© 2009 Cannondale Europe • www.cannondale.com

SUPER FATTY ULTRA DL (INCH THREAD)

HD169/

HD171/

27.0 Nm, 240 InLbsLoctite™ 242

20.0 Nm, 177 InLbs

HD182/

KF212/

HD191/BLKHD191/YEL

HD213/BLK

KITS

ITEM NUMBER DESCRIPTION

QHDST/EBO Headset Cannondale/Coda HeadShok Black

HD169/ Kit, Bearings, Headset - 2; HeadShok

HD191/BLK Slim Boot, 5-rib, Black

HD191/YEL Slim Boot, 5-rib, Yellow

HD213/ lockout lever

HDUPDL/80 CARTRIDGE KIT, DL80 UPGRADE

HD182/ DL80 Oil Cartridge Unit – Formerly DD80 Oil Cartridge

HD184/ FT80/DL80 Air Cartridge

TOOLS

ITEM NUMBER DESCRIPTION

HD136/ Tool, HeadShok outer cap pin

HDTL149/ Tool, HeadShok fork installation

KT016/ Tool, HeadShok bearing reset

KT020/ Kit, Lefty Steerer install (also for Fattys)

KH031/ Super castle tool

HDTL168/ Bullet tool

© 2009 Cannondale Europe • www.cannondale.com

SUPER FATTY ULTRA DLR Magura

SUPER FATTY ULTRA DLR MAgURA (INCH THREAD)

SpecificationsID: 13 mm higher outer tube (visual extension), hex nut for lock-out dial 15mm, red rebound dial with allen bolt in center, yellow/green cartridge body

Year 2005 (2006 with metric thread)

Travel (mm) 80

Damper Oil damped

Spring element Air sprung, coil negative spring

Lockout On the fly

Rebound External adjustment

RECOMMENDED STARTING AIR PRESSURE

Lbs Kg Psi Bar

120 54 50 3.4

130 59 55 3.8

140 64 60 4.1

150 68 65 4.5

160 73 70 4.8

170 77 75 5.2

180 82 80 5.5

190 86 90 6.2

200 91 100 7.2

PRESSURE LIMITS MINIMUM - 45 psi (3.1 bar) MAXIMUM - 120 psi (8.3 bar)

RECOMMENDED SAG 10-20% = 8 mm

DIAL INCH THREAD CARTRIDGE

© 2009 Cannondale Europe • www.cannondale.com

SUPER FATTY ULTRA DLR MAgURA (INCH THREAD)

HD170/

HD191/BLK

HD169/

HD171/

KF247/

KF226/

13mm Extension

KF232/

KF230/KF231/KF245/KF246/

KF229/

KF228/

TOOLS

ITEM NUMBER DESCRIPTION

HDTL149/ Tool, HeadShok Fork Installation

KT016/ Tool, HeadShok Bearing Reset

HDTL187/ Shaft Clamp Tool for Lefty and DL70

KT020/ Kit, Lefty Steerer install (also for Fattys)

KH031/ Super castle tool

KITS

ITEM NUMBER DESCRIPTION

KF235/ Upgrade kit, Damper, BLUE DL80

KF263/ Upgrade kit, Damper, RED DLR80, SOFT

KF264/ Upgrade kit, Damper, RED DLR80, STD

KF265/ Upgrade kit, Damper, RED DLR80, FIRM

KH005/ Kit, Air cylinder including Negative springs

HDUPDL/80 Cartridge kit, DL80 upgrade

© 2009 Cannondale Europe • www.cannondale.com

SUPER FATTY ULTRA DLR Magura

SUPER FATTY ULTRA DLR MAgURA (METRIC THREAD)

SpecificationsID: Metric thread, 13 mm higher outer tube (visual extension), hex nut for lockout dial 15mm, red rebound dial with allen bolt in center, yellow/green cartridge body (cartridge Body has small groove above thread)

Year 2006 with metric thread

Travel (mm) 80

Damper Oil damped

Spring element Air sprung, coil negative spring

Lockout On the fly

Rebound External adjustment

RECOMMENDED STARTING AIR PRESSURE

Lbs Kg Psi Bar

120 54 50 3.4

130 59 55 3.8

140 64 60 4.1

150 68 65 4.5

160 73 70 4.8

170 77 75 5.2

180 82 80 5.5

190 86 90 6.2

200 91 100 7.2

PRESSURE LIMITS MINIMUM - 45 psi (3.1 bar) MAXIMUM - 120 psi (8.3 bar)

RECOMMENDED SAG 10-20% = 8 mm

DIAL METRIC THREAD CARTRIDGE

© 2009 Cannondale Europe • www.cannondale.com

SUPER FATTY ULTRA DLR MAgURA (METRIC THREAD)

HD170/

HD191/BLK

HD169/

HD171/

KF247/

KF232/

KF230/KF231/KF245/KF246/

KF229/

KF228/

13mm Extension

TOOLS

ITEM NUMBER DESCRIPTION

HDTL149/ Tool, HeadShok Fork Installation

KT016/ Tool, HeadShok Bearing Reset

HDTL187/ Shaft Clamp Tool for Lefty and DL70

KT020/ Kit, Lefty Steerer install (also for Fattys)

KH031/ Super castle tool

KITS

ITEM NUMBER DESCRIPTION

KF235/ Upgrade kit, Damper, BLUE DL80

KF263/ Upgrade kit, Damper, RED DLR80, SOFT

KF264/ Upgrade kit, Damper, RED DLR80, STD

KF265/ Upgrade kit, Damper, RED DLR80, FIRM

KH005/ Kit, Air cylinder including Negative springs

© 2009 Cannondale Europe • www.cannondale.com

SUPER FATTY ULTRA DL (Metric thread)

SUPER FATTY ULTRA DL (METRIC THREAD)

SpecificationsID: Metric thread, silver top cap under lockout dial, 2-pin spanner holes, longer valve end (10,6mm)

Year 2005-2009

Travel (mm) 80

Damper Oil damped

Spring element Air sprung, coil negative spring

Lockout On the fly

Rebound No

KITS

ITEM NUMBER DESCRIPTION

KF263/ Kit, Damper, RED DLR80, SOFT - Upgrade possible

KF264/ Kit, Damper, RED DLR80, STD - Upgrade possible

KF265/ Kit, Damper, RED DLR80, FIRM - Upgrade possible

KH005/ Kit, Air cylinder including Negative springs

RECOMMENDED STARTING AIR PRESSURE

Lbs Kg Psi Bar

120 - 150 68 50 3.4

160 73 60 4.1

170 77 70 4.8

180 82 80 5.5

190 86 90 6.2

200 91 100 6.9

210 95 105 7.2

220 100 110 7.6

PRESSURE LIMITS MINIMUM - 40 psi (2.8 bar) MAXIMUM - 120 psi (8.3 bar)

RECOMMENDED SAG 10-20% = 8 mm

DIAL VALVE

© 2009 Cannondale Europe • www.cannondale.com

KF237/

HD170/

27.0 Nm, 240 InLbsLoctite™ 242

20.0 Nm, 177 InLbs

KF235/KF236/

KH005/

KP067/

KF238/

HD191/BLK

HD213/BLKHD169/

HD171/

SUPER FATTY ULTRA DL (METRIC THREAD)

KITS

ITEM NUMBER DESCRIPTION

KF235/ Kit, Damper, BLUE DL80

KF236/ Kit, Seal, BLUE DL80+05 DL50

KF237/ Kit, Schrader Plug, BLUE DL80, including Valve & Cap

KF238/ Kit, Air Piston, BLUE DL80, including Spring and holder

HD169/ Kit, Bearings, Headset - 2/ HeadShok

QHDST/EBO Headset Cannondale/Coda HeadShok Black

HD191/BLK Slim Boot, 5-rib, Black

HD191/YEL Slim Boot, 5-rib, Yellow

KP067/ Air piston quad seal, bag of 10

HD213/BLK Lockout lever

TOOLS

ITEM NUMBER DESCRIPTION

HD136/ Tool, HeadShok outer cap pin

HDTL149/ Tool, HeadShok fork installation

HDTL168/ TOOL, Bullet, Lefty and Fatty 12.7 mm

KT016/ Tool, HeadShok bearing reset

KH031 Super castle tool

KT020/ Kit, Lefty Steerer install (also for Fattys)

© 2009 Cannondale Europe • www.cannondale.com

SUPER FATTY ULTRA DLR

SUPER FATTY ULTRA DLR (METRIC THREAD)

SpecificationsID: Metric thread, long valve end, same lockout dial as Speed DLR, red rebound dial with set screw on side, conical top cap

Year 2006 +

Travel (mm) 80

Damper Oil damped/Cartridge

Spring element Air sprung, coil negative spring

Lockout On the fly

Rebound External adjustment

RECOMMENDED STARTING AIR PRESSURE

Lbs Kg Psi Bar

120 54 50 3.4

130 59 55 3.8

140 64 60 4.1

150 68 65 4.5

160 73 70 4.8

170 77 75 5.2

180 82 80 5.5

190 86 90 6.2

200 91 100 7.2

PRESSURE LIMITS MINIMUM - 45 psi (3.1 bar) MAXIMUM - 120 psi (8.3 bar)

RECOMMENDED SAG 10-20% = 8 mm

DLR DIAL

© 2009 Cannondale Europe • www.cannondale.com

SUPER FATTY ULTRA DLR (METRIC THREAD)

KF266/

KF210/

KF211/

KF237/

KF267/

HD170/

HD191/BLK

KP067/

HD169/

HD171/

KF263/KF264/KF265/KF236/

KH005/

KH022/

KITS

ITEM NUMBER DESCRIPTION

KF235/ Kit, Damper, BLUE DL80

KF236/ Kit, Seal, BLUE DL80+05 DL50

KF237/ Kit, Schrader Plug, BLUE DL80, including Valve & Cap

KF238/ Kit, Air Piston, BLUE DL80, including Spring and holder

HD169/ Kit, Bearings, Headset - 2/ HeadShok

QHDST/EBO Headset Cannondale/Coda HeadShok Black

HD191/BLK Slim Boot, 5-rib, Black

HD191/YEL Slim Boot, 5-rib, Yellow

KP067/ Air piston quad seal, bag of 10

HD213/BLK Lockout lever

© 2009 Cannondale Europe • www.cannondale.com

LEFTY DLR 100 Steel

LEFTY DLR 100 STEEL

SpecificationsID: Welded steel spindle, no threads under lockout dial, machined clamps, not bonded

Year 2000

Travel (mm) 100

Damper Oil damped

Spring element Air sprung, coil negative spring

Lockout On the fly

Rebound External adjustment

Compatilibities All HeadShok Stemscartridge and aircylinder not compatible with 2001+ parts

RECOMMENDED SAG

SAG

AB B - A = SAG (mm)

Measure the length of the fork as shown below – remember this as measurement A.

With the help of a second person, seat the rider on the saddle with feet on pedals and hands on the handlebar. Again measure the length of the fork - remember this as measurement B.

To calculate sag subtract B from A .

The recommended sag measurement (in millimeters) as a percentage of your forks total travel, should fall within the guidelines listed in the attached chart.

To increase sag, release air. To decrease sag, add air.

RECOMMENDED SAG

XC 20-30%

DIAL

© 2009 Cannondale Europe • www.cannondale.com

LEFTY DLR 100 STEEL

KITS

ITEM NUMBER DESCRIPTION

HD201/ Lefty DLR '00 Dial Holder Plug For Lockout/Damping ADJ

HD202/BLU Lefty DLR '00 Oil Damper Cartridge, MEDIUM

HD202/GRN Lefty DLR '00 Oil Damper Cartridge, SOFT

HD202/RED Lefty DLR '00 Oil Damper Cartridge, HARD

HD203/ Lefty DLR '00 Air Cylinder and Air Piston

HD211/ Lefty DLR '00 Air Cylinder Saddle

HD214/ Lefty DLR '00 Damping Adjuster Knob

HD212/ Negative Spring KIT for Lefty 100 Oil Cart

HD212/WHT Kit, Spring - Negative, Lefty, X-firm

HD011/ Kit, Band Clamp Cable Guide (2), Boot Lefty

HD205/ Lefty Upper clamp

HD206/ Lower crown/steerer, Lefty 100

TOOLS

ITEM NUMBER DESCRIPTION

HDTL200/ Tool, HeadShok Lefty cart castles '00 only

KT020/ Steerer instalation/removal

HDTL168/ 1/2 bullet tool

HD187/ 1/2 inch shaft clamps

QCTL108/ Tool, Lefty truing axle

KT016/ Tool, HeadShok Bearing Reset

© 2009 Cannondale Europe • www.cannondale.com

LEFTY DLR 100 Steel or Titanium

LEFTY DLR 100 (STEEL oR TITANIUM)

SpecificationsID: Titanium or steel spindel, threads and large lockring under lockout dial, forged clamps – not bonded

Year 2000-2004

Travel (mm) 100

Damper Oil damped

Spring element Air sprung, coil negative spring

Lockout On the fly

Rebound External adjustment

Compatilibities All HeadShok StemsCartridge and aircylinder Not compatible with 2000 parts

RECOMMENDED SAG

SAG

AB B - A = SAG (mm)

Measure the length of the fork as shown below – remember this as measurement A.

With the help of a second person, seat the rider on the saddle with feet on pedals and hands on the handlebar. Again measure the length of the fork - remember this as measurement B.

To calculate sag subtract B from A .

The recommended sag measurement (in millimeters) as a percentage of your forks total travel, should fall within the guidelines listed in the attached chart.

To increase sag, release air. To decrease sag, add air.

RECOMMENDED SAG

XC 20-30%

DIAL

© 2009 Cannondale Europe • www.cannondale.com

LEFTY DLR 100 (STEEL oR TITANIUM)

KITS

ITEM NUMBER DESCRIPTION

HD166/ KIT All Seals, FT, DL and Lefty 100 cartridges

HD001/ Kit, '01 DLR Dial holder/plug

HD002/ Kit, Air cylinder for '01 DLR

HD022/ Kit, Damp Adjust Knob-2nd. Lefty '01->

HD023/ Kit, 2001 DLR Damper - SM

HD026/ Kit, Perch-DL70/80, DLR 100

HD212/ Negative Spring Kit for Lefty 100 Oil Cart

HD212/WHT Kit, Spring - Negative, Lefty, X-firm

HD011/ Kit, Band Clamp Cable Guide (2), Boot Lefty

HD205/ Lefty Upper clamp

HD206/ lower crown/steerer, Lefty 100

KT040/ Kit, Steerer, X-Long Lefty

HD016/ Steerer, Lefty

TOOLS

ITEM NUMBER DESCRIPTION

KT006/ Tool , lower cartridge Cap remover

KT020/ Steerer installation/removal

HDTL168/ 1/2 bullet tool

HD187/ 1/2 inch shaft clamps

KT004/ Tool, Lefty DLR/ELO Kidney tool '01 and +

QCTL108/ Tool, Lefty Truing Axle

KT016/ Tool, HeadShok Bearing Reset

© 2009 Cannondale Europe • www.cannondale.com

LEFTY CARBON DLR 100 Forged Steel or Titanium ELO or DLR

LEFTY CARboN ELo oR DLR 100

SpecificationsID: Titanium or steel spindle, threads and large lockring under lock-out dial, forged bonded clamps, carbon outer tube, first gen. has carbon inner tube

Year 2001-2004

Travel (mm) 100

Damper Oil damped

Spring element Air sprung, coil negative spring

Lockout On the fly or ELO (electronic lockout)

Rebound External adjustment

Compatilibities Cartridge and aircylinder not compatible with 2000 parts, fits Stem/steerer, (carbon) SL steeringtube and extra long steeringtube.

RECOMMENDED SAG

SAG

AB B - A = SAG (mm)

Measure the length of the fork as shown below – remember this as measurement A.

With the help of a second person, seat the rider on the saddle with feet on pedals and hands on the handlebar. Again measure the length of the fork - remember this as measurement B.

To calculate sag subtract B from A .

The recommended sag measurement (in millimeters) as a percentage of your forks total travel, should fall within the guidelines listed in the attached chart.

To increase sag, release air. To decrease sag, add air.

RECOMMENDED SAG

XC 20-30%

ELO DIAL DLR DIAL

© 2009 Cannondale Europe • www.cannondale.com

LEFTY CARboN ELo oR DLR 100

KITS

ITEM NUMBER DESCRIPTION

HD166/ KIT All Seals, FT, DL and Lefty 100 cartridges

HD001/ Kit, '01 DLR Dial holder/plug

HD002/ Kit, Air cylinder for '01 DLR

HD022/ Kit, Damp Adjust Knob-2nd. Lefty '01->

HD023/ Kit, 2001 DLR Damper - SM

HD026/ Kit, Perch-DL70/80, DLR 100

HD212/ Negative Spring Kit for Lefty 100 Oil Cart

HD212/WHT Kit, Spring - Negative, Lefty, X-firm

HD011/ Kit, Band Clamp Cable Guide (2), Boot Lefty

HD205/ Lefty Upper clamp

HD206/ lower crown/steerer, Lefty 100

KT040/ Kit, Steerer, X-Long Lefty

HD016/ Steerer, Lefty

HD300/ Kit, Battery – ELO Li-Ion high power

HD301/ Kit, Elec. Cont. Unit - ELO

HD003/ Collar, Upper Carbon Lefty

HD004/ Collar, Lower, Lefty Carbon gold

HD005/ Kit, Air Cylinder Saddle-2002 Full Carbon Lefty

HD027/ Kit, Perch -Carbon ELO

HD010/ Kit, Spacers-Lefty Travel Reducers

TOOLS

ITEM NUMBER DESCRIPTION

KT006/ Tool , lower cartridge Cap remover

KT020/ Steerer installation/removal

HDTL168/ 1/2 bullet tool

HD187/ 1/2 inch shaft clamps

KT004/ Tool, Lefty DLR/ELO Kidney tool '01 and +

QCTL108/ Tool, Lefty Truing Axle

KT016/ Tool, HeadShok Bearing Reset

HD003/

HD002/

HD205/

HD301/

HD004/

© 2009 Cannondale Europe • www.cannondale.com

LEFTY MAX 140 FFD (Fluid Flow Damping)Only Alloy version

LEFTY MAx 140 FFD

SpecificationsID: Black spindle, alloy outer tube, polished clamps, red rebound dial - no screw, bottom (images)

Year 2006 + 2007

Travel (mm) 140

Damper Oil damped

Spring element Steel coil sprung, “Fluid Flow Damping”

Lockout No

Rebound External adjustment

Compatilibities All stems (not stem/steerer) TPC + SPV upgrade possible

KITS

ITEM NUMBER DESCRIPTION

KF216/ Kit, Damper, Compression, MAX140, TPC

KF220/ Kit, Bladder only SPV, MAX140

KF223/ Kit, Damper, Compression, MAX140, SPV

KF218/ Kit, Damper, Rebound, MAX140, SPV

PRESSURE SET UP

Spring preload

RECOMMENDED SAG

XC 20-30%

Trail 25-35%

DIAL

© 2009 Cannondale Europe • www.cannondale.com

LEFTY MAx 140 FFD

KITS

ITEM NUMBER DESCRIPTION

KF215/ Kit, Damper, Compression, MAX140, FFD

KF217/ Kit, Damper, Rebound, MAX140, FFD/TPC

KF221/ Kit, Knob, Compression, MAX140, TPC

KF222/ Kit, Boot, Lefty MAX 140

KF219/ Kit, Damper, Control ASSY, MAX140

KF224/ Kit, Damper, Piston Ring, MAX140-5

KF225/ Kit, Seal, Max140

KF233/ Kit, KNOB, REBOUND, MAX140

KF234/ Kit, PUSHROD, MAX140

KF354/ KIT, TACHO MOUNT LEFTY FORKS

HD011/ Kit, Band Clamp Cable Guide (2), Boot Lefty

HD210/ Lefty steerer tube plug

QSMSEAL/ Upper HeadShok bearing seal

HD209/BLK Air filter hood and filter unit for Lefty, Black

KF205/ Kit, Split Ring, 2

KF206/ Kit, Collar, Upper, Alloy, Speed110/MAX140

QC679/ Kit, Clamp, Upper, MAX

QC680/ Kit, Clamp, Lower, MAX

22mm10 Nm, 89 InLbs

2mm

HD210/

QL679/

KF233/

KF206/

KF205/

KF225/

KF217/

KF234/

KF215/

KF219/HD209/BLK

KF222/

KF354/

QL680/

TOOLS

ITEM NUMBER DESCRIPTION

QCTL108/ Tool, Lefty Truing Axle

SPRINGS

ITEM NUMBER DESCRIPTION

KF213/BLK Kit, Spring, MAX140 FE, XFIRM

KF213/BLU Kit, Spring, MAX140 FE, STD

KF213/BRN Kit, Spring, MAX140 FE, XXFIRM

KF213/GRN Kit, Spring, MAX140 FE, SOFT

KF213/RED Kit, Spring, MAX140 FE, FIRM

KF214/BLU Kit, Spring, MAX140 TI, STD

KF214/GRN Kit, Spring, MAX140 TI, SOFT

KF214/RED Kit, Spring, MAX140 TI, FIRM

© 2009 Cannondale Europe • www.cannondale.com

LEFTY MAX 140 TPC Only Alloy version

LEFTY MAx 140 TPC

SpecificationsID: black spindle, alloy outer tube, polished clamps, red rebound dial - no screw, blue dial with set screw at bottom (images)

Year 2006 + 2007

Travel (mm) 140

Damper Oil damped

Spring element Steel coil sprung, “Twin Piston Chamber”

Lockout No

Rebound External adjustment

Compatilibities All stems (not stem/steerer) SPV upgrade possibleKit for 120 travel available

KITS

ITEM NUMBER DESCRIPTION

KF220/ Kit, Bladder only SPV, MAX140

KF223/ Kit, Damper, Compression, MAX140, SPV

KF218/ Kit, Damper, Rebound, MAX140, SPV

PRESSURE SET UP

Spring preload

RECOMMENDED SAG

Trail 25-35%

TPC DIAL TPC KNOB (BOTTOM)

© 2009 Cannondale Europe • www.cannondale.com

LEFTY MAx 140 TPC

KITS

ITEM NUMBER DESCRIPTION

KF215/ Kit, Damper, Compression, MAX140, FFD

KF216/ Kit, Damper, Compression, MAX140, TPC

KF217/ Kit, Damper, Rebound, MAX140, FFD/TPC

KF221/ Kit, Knob, Compression, MAX140, TPC

KF222/ Kit, Boot, Lefty MAX 140

KF219/ Kit, Damper, Control ASSY, MAX140

KF224/ Kit, Damper, Piston Ring, MAX140-5

KF225/ Kit, Seal, MAX140

KF233/ Kit, KNOB, Rebound, MAX140

KF234/ Kit, Pushrod, MAX140

KF354/ KIT, Tacho Mount Lefty Forks

HD011/ Kit, Band Clamp Cable Guide (2), Boot Lefty

HD210/ Lefty steerer tube plug

QSMSEAL/ Upper HeadShok bearing seal

HD209/BLK Air filter hood and filter unit for Lefty, Black

KF205/ Kit, Split Ring, 2

KF206/ Kit, Collar, Upper, Alloy, Speed110/MAX140

QC679/ Kit, Clamp, Upper, MAX

QC680/ Kit, Clamp, Lower, MAX

22mm10 Nm, 89 InLbs

2mm

2mm

HD210/

QL679/KF233/

KF206/

KF205/

KF225/

KF217/

KF224/

KF216/

KF221/

KF234/

KF219/

HD209/BLK

KF222/

KF354/

QL680/

TOOLS

ITEM NUMBER DESCRIPTION

QCTL108/ Tool, Lefty Truing Axle

SPRINGS

ITEM NUMBER DESCRIPTION

KF213/BLK Kit, Spring, MAX140 FE, XFIRM

KF213/BLU Kit, Spring, MAX140 FE, STD

KF213/BRN Kit, Spring, MAX140 FE, XXFIRM

KF213/GRN Kit, Spring, MAX140 FE, SOFT

KF213/RED Kit, Spring, MAX140 FE, FIRM

KF214/BLU Kit, Spring, MAX140 TI, STD

KF214/GRN Kit, Spring, MAX140 TI, SOFT

KF214/RED Kit, Spring, MAX140 TI, FIRM

© 2009 Cannondale Europe • www.cannondale.com

LEFTY MAX 140 SPV evolveCarbon & Alloy version (IMAGE SHOWS ALLOY)

LEFTY MAx 140 SPV EVoLVE

SpecificationsID: Titanium or steel spindle, threads and large lockring under lock-out dial, forged bonded clamps, carbon outer tube (for carbon version), first gen. has carbon inner tube

Year 2006 + 2007

Travel (mm) 140

Damper Oil damped

Spring element Ti coil sprung, SPV

Lockout Adjustable rebound

Rebound External adjustment

Compatilibities Alloy: All stems (not stem/steerer)Carbon: All stems and stem/steerer TPC downgrade possibleKit for 120 travel available

KITS

ITEM NUMBER DESCRIPTION

KF215/ Kit, Damper, Compression, MAX140, FFD

KF216/ Kit, Damper, Compression, MAX140, TPC

KF217/ Kit, Damper, Rebound, MAX140, FFD/TPC

RECOMMENDED STARTING AIR PRESSURE

Lbs Kg Psi Bar SPRING

120 54 40 2.8 GREEN

130 59 50 3.4 GREEN

140 64 60 4.1 GREEN

150 68 50 3.4 BLUE

160 73 60 4.1 BLUE

170 77 60 4.1 RED

180 82 60 4.1 RED

190 86 60 4.1 BLACK

200 91 70 4.8 BLACK

210 95 70 4.1 BLACK

220 100 5.5 5.5 BLACK

PRESSURE LIMITS MINIMUM - 45 psi (3.1 bar) MAXIMUM - 120 psi (8.3 bar)

RECOMMENDED SAG 25-35%

© 2009 Cannondale Europe • www.cannondale.com

LEFTY MAx 140 SPV EVoLVE

KITS

ITEM NUMBER DESCRIPTION

KF214/RED Kit, Spring, MAX140 TI, FIRM

KF218/ Kit, Damper, Rebound, MAX140, SPV

KF219/ Kit, Damper, Control ASSY, MAX140

KF220/ Kit, Bladder only SPV, MAX140

KF221/ Kit, Knob, Compression, MAX140, TPC

KF222/ Kit, Boot, Lefty MAX 140

KF223/ Kit, Damper, Compression, MAX140, SPV

KF224/ Kit, Damper, Piston Ring, MAX140-5

KF225/ Kit, Seal, Max140

KF233/ Kit, Knob, Rebound, MAX140

KF234/ Kit, Pushrod, MAX140

KF354/ Kit, Tacho Mount Lefty Forks

HD011/ Kit, Band Clamp Cable Guide (2), Boot Lefty

HD210/ Lefty steerer tube plug

QSMSEAL/ Upper HeadShok bearing seal

HD209/BLK Air filter hood and filter unit for Lefty, Black

KF205/ Kit, Split Ring, 2

KF206/ Kit, Collar, Upper, Alloy, Speed110/MAX140

QC679/ Kit, Clamp, Upper, MAX

QC680/ Kit, Clamp, Lower, MAX

4

HD210/

QL679/

KF233/

KF206/

KF218

KF205/

KF225/

KF224/

KF219/

HD209/BLK

KF222/

KF354/

QL680/

TOOLS

ITEM NUMBER DESCRIPTION

QCTL108/ Tool, Lefty Truing Axle

SPRINGS

ITEM NUMBER DESCRIPTION

KF213/BLK Kit, Spring, MAX140 FE, XFIRM

KF213/BLU Kit, Spring, MAX140 FE, STD

KF213/BRN Kit, Spring, MAX140 FE, XXFIRM

KF213/GRN Kit, Spring, MAX140 FE, SOFT

KF213/RED Kit, Spring, MAX140 FE, FIRM

KF214/BLU Kit, Spring, MAX140 TI, STD

KF214/GRN Kit, Spring, MAX140 TI, SOFT

KF214/RED Kit, Spring, MAX140 TI, FIRM

© 2009 Cannondale Europe • www.cannondale.com

LEFTY SPEED DLR 110

LEFTY SPEED DLR 110

SpecificationsID: Color: black metal, clamps forged - not bonded to outer tube, outer tube alloy, black spindle, red rebound dial - set screw on side metal lockout dial, gold cartridge body

Year 2006 + 2007

Travel (mm) 110

Damper Oil damped

Spring element Air sprung, coil negative spring

Lockout On the fly

Rebound External adjustment

Compatilibities Cartridge NOT compatible with black SL110!

RECOMMENDED STARTING AIR PRESSURE

Lbs Kg Psi Bar

120 54 80 5.5

130 59 85 5.9

140 64 90 6.2

150 68 100 6.9

160 73 105 7.2

170 77 110 7.6

180 82 120 7.3

190 86 125 8.6

200 91 130 9.0

210 95 135 9.3

220 100 145 10.0

PRESSURE LIMITS MINIMUM - 50 psi (3.4 bar) MAXIMUM - 225 psi (15.5 bar)

RECOMMENDED SAG XC 20-30%

DLR DIAL

© 2009 Cannondale Europe • www.cannondale.com

LEFTY SPEED DLR 110

KITS

ITEM NUMBER DESCRIPTION

KF202/ Kit, Seal, Speed 110

KF204/ Kit, Shim, Revavling, Speed110/MAX140

KF205/ Kit, Split Ring,2

KF206/ Kit, Collar, Upper, Alloy, Speed110/MAX140 (old style)

KF207/ Kit, Collar, Upper, Carbon, Speed110/MAX140

KF210/ Kit, Lever, Lockout, Speed110 w/nut

KF211/ Kit, Knob, Rebound, Speed 110

KF212/ Kit, Cap, Air Valve, Speed 110

KF213/ Kit, Piston, Air, Speed 110

HD169/ Kit, Bearings, Headset - 2; HeadShok

QHDST/EBO Headset Cannondale/Coda HeadShok Black

QC678/ Kit, Boot, Lefty MAX /Jake, tailed

HD209/BLK Air filter hood and filter unit for Lefty, Black only

HD210/ Lefty steerer tube plug

KT040/ Kit, Steerer, X-Long Lefty

HD016/ Steerer, Lefty

QSMSEAL/ Upper HeadShok bearing seal

HD011/ Kit, Band Clamp Cable Guide (2), Boot Lefty

HD205/ Lefty Upper clamp

HD206/ lower crown/steerer, lefty

TOOLS

ITEM NUMBER DESCRIPTION

KT020/ Steerer installation/removal

HDTL168/ 1/2 bullet tool

QCTL108/ Tool, Lefty Truing Axle

KH031/ Super castle tool

Rider WT. (lbs) Rider WT. (kg) Fork size Bike Size Neg. Spring Kits

to 145 65 SOFT PT/SM GREEN KF200/GRN

145-175 65 - 79 STANDARD MD BLUE KF200/BLU

175-195 79 - 88 FIRM LG RED KF200/RED

195 + 88 + X-FIRM XL BLACK KF200/BLK

© 2009 Cannondale Europe • www.cannondale.com

LEFTY SPEED DLR2 110Carbon & Alloy version (IMAGE SHOWS ALLOY)

LEFTY SPEED DLR2 110 CARboN & ALLoY

SpecificationsID: Color: gun metal or carbon, clamps bonded, outer tube alloy or carbon, black spindle, red rebound dial, metal lockout dial, gold cartridge body.

Year Alloy 2006-2008Carbon 2006-2007

Travel (mm) 110

Damper Oil damped

Spring element Air sprung, coil negative spring

Lockout On the fly

Rebound External adjustment

Compatilibities Fits all HeadShok stems and stem/steeres,Cartridge NOT compatible with SL110!

KITS

ITEM NUMBER DESCRIPTION

KH055/ Kit, Convert, DLRSL&DLR2 - Solo Air

RECOMMENDED STARTING AIR PRESSURE

Lbs Kg Psi Bar

120 54 85 5.9

130 59 90 6.2

140 64 100 6.9

150 68 105 7.2

160 73 110 7.6

170 77 115 8.0

180 82 125 8.6

190 86 130 9.0

200 91 140 9.7

210 95 145 10.0

220 100 155 10.7

PRESSURE LIMITS MINIMUM - 50 psi (3.4 bar) MAXIMUM - 225 psi (15.5 bar)

RECOMMENDED SAG 20 - 30% (22.0 - 23.0 mm)

DLR2 DIAL

© 2009 Cannondale Europe • www.cannondale.com

LEFTY SPEED DLR2 110 CARboN & ALLoY

9.0 Nm, 80 InLbs

20.0 Nm, 177 InLbs

28.0 Nm, 248 InLbsLoctite™ 242

0.33 Nm, 3 InLbs

0.23 Nm, 2.0 InLbs

HD215/

HD209/BLK

QC678/

Carbon version KF207/Alloy version KF206/

KF212/

16mm

LEFTYBOLTS

HD011/

KF205/

HD175/BLKHD185/BLK

KF211/

9.0 Nm, 80 InLbs

KH057/

KF272/

KF210/

28.0 Nm, 248 InLbs

2.0 Nm, 18 InLbs

10 Nm, 89 InLbsLoctite™ 262

KF200/***

KF201/***KF202/KF204/

KF213/

Rider WT. (lbs) Rider WT. (kg) Fork size Bike Size Neg. Spring Kits

to 145 65 SOFT PT/SM GREEN KF200/GRN

145-175 65 - 79 STANDARD MD BLUE KF200/BLU

175-195 79 - 88 FIRM LG RED KF200/RED

195 + 88 + X-FIRM XL BLACK KF200/BLK

© 2009 Cannondale Europe • www.cannondale.com

LEFTY SPEED CARBON FOX Terra Logic

LEFTY SPEED CARboN Fox TERRA LogIC

SpecificationsID: Color: carbon w/polished clamps, clamps bonded, outer tube carbon, black spindle, large red rebound dial, small silver cap in center, blue threshold knob at bottom.

Year 2006

Travel (mm) 110

Damper Oil damped

Spring element Air sprung, float air negative spring

Lockout Inertia valve lockout

Rebound External adjustment

Compatilibities Fits all HeadShok stems and stem/steeres,Cartridge NOT compatible with SL110 or DLR110 RLC 110 upgrade possible

RECOMMENDED STARTING AIR PRESSURE

Lbs Kg Psi Bar

140 64 35 2.4

150 68 40 2.8

160 73 45 3.1

170 77 50 3.4

180 82 60 4.1

190 86 70 4.8

PRESSURE LIMITS MINIMUM - 20 psi (1.4 bar) MAXIMUM - 120 psi (8.3 bar)

RECOMMENDED SAG 20 - 30% (22.0 - 23.0 mm)

DIAL

© 2009 Cannondale Europe • www.cannondale.com

LEFTY SPEED CARboN Fox TERRA LogIC

KITS

ITEM NUMBER DESCRIPTION

KF250/ KIT, KNOB, REBOUND, Lefty-FOX Terra Logic IV

KF251/ KIT, SPRING, AIR ON TOP, Lefty-FOX Terra Logic IV

KF252/ Kit, D amper, Lefty-FOX Terra Logic IV

KF253/ Kit, Seal, Air on top, Lefty-FOX Terra Logic IV

HD169/ Kit, Bearings, Headset - 2; HeadShok

QHDST/EBO Headset Cannondale/Coda HeadShok Black

QC678/ Kit, Boot, Lefty MAX /Jake, tailed

HD209/BLK Air filter hood and filter unit for Lefty, Black only

HD210/ Lefty steerer tube plug

KT040/ KIT, STEERER, X-LONG LEFTY

HD016/ Steerer, Lefty

QSMSEAL/ Upper HeadShok bearing seal

HD011/ Kit, Band Clamp Cable Guide (2), Boot Lefty

TOOLS

ITEM NUMBER DESCRIPTION

KT020/ Steerer installation/removal

QCTL108/ Tool, Lefty Truing Axle

© 2009 Cannondale Europe • www.cannondale.com

LEFTY SPEED CARBON SL 110

LEFTY SPEED CARboN SL 110

SpecificationsID: Blue lockout dial, SL laser etched on black spindle polished clamps - machined flat, black cartidge body.

Year 2007-2009

Travel (mm) 110

Damper Oil damped

Spring element Air sprung, coil negative spring

Lockout On the fly

Rebound External adjustment

Compatilibities Stems, steering tubes, stem/steeres

KITS

ITEM NUMBER DESCRIPTION

KH055/ Kit, Convert, DLRSL&DLR2 – Solo Air

RECOMMENDED STARTING AIR PRESSURE

Lbs Kg Psi Bar

120 54 80 5.5

130 59 85 5.9

140 64 90 6.2

150 68 100 6.9

160 73 105 7.2

170 77 110 7.6

180 82 120 7.3

190 86 125 8.6

200 91 130 9.0

210 95 135 9.3

220 100 145 10.0

PRESSURE LIMITS MINIMUM - 50 psi (3.4 bar) MAXIMUM - 225 psi (15.5 bar)

RECOMMENDED SAG 20 - 30% = (22.0 - 23.0 mm)

DIAL

© 2009 Cannondale Europe • www.cannondale.com

KT028/20Nm, 177 InLbs

2 Nm, 18 InLbs

28 Nm248 InLbs

Apply NL GI-2 Synthetic grease to items marked

KF211/

KT031/

KT027/

KF205/

KH055/

KH026/

HD215/

HD011/

HD209/

QC678/

HO175/BLKHO185/BLK

29’er Travelreduction spacers3 x 10 mm

LEFTY SPEED CARboN SL 110

Rider WT. (lbs) Rider WT. (kg) Fork size Bike Size Neg. Spring Kits

to 145 65 SOFT PT/SM GREEN KT025/GRN

145-175 65 - 79 STANDARD MD BLUE KT025/BLU

175-195 79 - 88 FIRM LG RED KT025/RED

195 + 88 + X-FIRM XL BLACK KT025/BLK

KITS

ITEM NUMBER DESCRIPTION

KT026/GRN KIT, DAMPER LEFTY DLRSL (remove volume compensator)

KT026/BLU KIT, DAMPER LEFTY DLRSL (remove volume compensator)

KT026/RED KIT, DAMPER LEFTY DLRSL (remove volume compensator)

KT026/BLK KIT, DAMPER LEFTY DLRSL (remove volume compensator)

KT213 KIT, AIR PISTON

© 2009 Cannondale Europe • www.cannondale.com

LEFTY SPEED SL2 CARBON 110 (Solo Air)

LEFTY SPEED CARboN SL2 110 (SoLo AIR)

SpecificationsID: Blue lockout dial, red rebound dial with set screw on side, polished clamps - machined flat, OPI laser etched on black spindle.

Year 2009 +

Travel (mm) 110

Damper Oil damped

Spring element Air sprung, SOLO AIR self adjusting negative spring

Lockout On the fly

Rebound External adjustment

Compatilibities Stems, steering tubes, Stem/steerer

RECOMMENDED STARTING AIR PRESSURE

Lbs Kg Psi Bar

120 54 85 5.9

130 59 90 6.2

140 64 100 6.9

150 68 105 7.2

160 73 110 7.6

170 77 115 8.0

180 82 125 8.6

190 86 130 9.0

200 91 140 9.7

210 95 145 10.0

220 100 155 10.7

PRESSURE LIMITS MINIMUM - 50 psi (3.4 bar) MAXIMUM - 225 psi (15.5 bar)

RECOMMENDED SAG 20 - 30% = (22.0 - 23.0 mm)

DIAL OPI SPINDLE

© 2009 Cannondale Europe • www.cannondale.com

LEFTY SPEED CARboN SL2 110 (SoLo AIR)

KT028/20Nm, 177 InLbs

2 Nm, 18 InLbs

28 Nm248 InLbs

Apply NL GI-2 Synthetic grease to items marked

KF211/

KT031/

KT027/

KF205/

KH055/

KH026/

HD215/

HD011/

HD209/

QC678/

* DRAWING DOES NOT SHOW OPI SPINDLE

HO175/BLKHO185/BLK

29’er Travelreduction spacers3 x 10 mm

KITS

ITEM NUMBER DESCRIPTION

KH052/ Kit, Air Piston, DLR SL, Solo Air

KT024/ Kit, Seals, DLR SL

KT051 Kit, Damper, Lefty DLR SL, Solo

© 2009 Cannondale Europe • www.cannondale.com

LEFTY MAX CARBON FOX RLC 130

LEFTY MAx CARboN Fox RLC 130

SpecificationsID: Red rebound dial with allen screw in center, 2nd blue adjust wheel under lockout dial.

Year 2008-2009 +

Travel (mm) 130

Damper Oil damped

Spring element Ti coil spring, Adjustable low-speed comp

Lockout Yes, Adjustable lock-out threshold

Rebound External Adjustment

Compatilibities Stems, steering tubes, Stem/steerer

KITS

ITEM NUMBER DESCRIPTION

KH041/ Lefty PBR Damper

RECOMMENDED SAG

SAG

AB B - A = SAG (mm)

Measure the length of the fork as shown below – remember this as measurement A.

With the help of a second person, seat the rider on the saddle with feet on pedals and hands on the handlebar. Again measure the length of the fork - remember this as measurement B.

To calculate sag subtract B from A .

The recommended sag measurement (in millimeters) as a percentage of your forks total travel, should fall within the guidelines listed in the attached chart.

To increase sag, release air. To decrease sag, add air.

RECOMMENDED SAG

Trail 25-35%

DIAL

© 2009 Cannondale Europe • www.cannondale.com

LEFTY MAx CARboN Fox RLC 130

KF222/

HD209/BLK

KH014/

KH025/

SUPPLIEDBYFOX

KH015/

KH032/033/034/035/

KITS

ITEM NUMBER DESCRIPTION

KH032/ Spring, soft, ti

KH033/ Spring, standard, ti

KH034/ Spring, firm, ti

KH035/ Spring, x-firm, ti

KH025/ FOX RLC preload tube

KH011/ FOX RLC upgrade kit

KH012/ FOX RLC seal kit

KH028/ FOX RLC rebound shaft

KH015/ FOX RLC compression damper

KH029/ FOX RLC seal head

KH026/ FOX RLC compression clamp

KH027/ FOX RLC retaining ring

KF205/ Split rings 2

KH016/ FOX RLC outer collar

HD169/ Kit, Bearings, Headset - 2; HeadShok

QHDST/EBO Headset Cannondale/Coda HeadShok black

HD209/BLK Air filter hood and filter unit for Lefty, Black only

HD210/ Lefty steerer tube plug

8A502/BLK Frame protection bumper

KF354/ Kit, Tacho Mount Lefty Forks

KT040/ Kit, Steerer, X-Long Lefty

KF222/ Kit, Boot, Lefty MAX 140

© 2009 Cannondale Europe • www.cannondale.com

LEFTY MAX 130 PBR Carbon & Alloy version

LEFTY MAx CARboN 130 PbR

SpecificationsID: Large red rebound dial w/ small blue lockout relase button, air valve at bottom, small blue lockout push button inside rebound dial, carbon outer tube.

Year 2008-2009 +

Travel (mm) 130

Damper Oil damped

Spring element Air sprung, Solo Air self adjusting negative spring

Lockout Adjustable lock-out threshold

Rebound External Adjustment

Compatilibities Stems, steering tubes

KITS

ITEM NUMBER DESCRIPTION

KH017/ Fox RLC 130 mm rebound damper

KH011/ Fox RLC upgrade kit

RECOMMENDED STARTING AIR PRESSURE

Lbs Kg Psi Bar

120 54 85 5.8

130 59 90 6.2

140 64 95 6.5

150 68 105 7.2

160 73 120 8.2

170 77 135 9.3

180 82 150 10.3

190 86 165 11.3

200 91 180 12.4

210 95 195 13.4

220 100 205 14.1

PRESSURE LIMITS MINIMUM - 50 psi (3.4 bar) MAXIMUM - 225 psi (15.5 bar)

RECOMMENDED SAG 25 - 30% = (32.5 - 39.0 mm)

KH045/ PBR DIAL Carbon version KH046/ PBR DIAL Alloy version

© 2009 Cannondale Europe • www.cannondale.com

LEFTY MAx CARboN 130 PbR

28.0 Nm, 248 InLbs

9.0 Nm, 80 InLbs

20.0 Nm, 177 InLbs

0.33 Nm, 3 InLbs

0.5 Nm, 4.4 InLbsLoctite™ 222

0.23 Nm, 2.0 InLbs

HD215/

HD209/BLK

KF222/

KH045/KH046/

KT028/

16mm

LEFTY BOLTS

HD011/

KF205/

HD175/BLK

KH044/

KH042/

KH061/

HD226/

KH043/

9.0 Nm, 80 InLbs

KH057/

3.4 Nm, 30 InLbsLoctite™ 242

28.0 Nm, 248 InLbsLoctite™ 242

Loctite™ 401

KITS

ITEM NUMBER DESCRIPTION

KH041/ Kit, Damper, Lefty PBR 130

KH042/ Kit, Seals, PBR 130