Fasteners and Accessories 281-302 - Spokane Hardware Supply · 2016-11-22 · YOUR SHS ACCOUNT#...

TEL 509.535.1663 TOLL-FREE 800.888.1663 www.spokanehardware.com 281

To Order – Call 509.535.1663 or 800.888.1663FastCap Self-Adhesive Cover Caps

FASTENERS AND ACCESSORIES

Fasteners and Accessories .......281-302

FastCap Self-Adhesive Cover Caps ....... 283-285

Drawer Front and Assembly Screws .... 285-287

Confirmat and Installation Screws ............... 287

Pocket Hole/Face Frame Screws ................... 288

Drywall Screws ................................................. 288

Hardware Screws ..................................... 289-292

Euro Screws .............................................. 292-293

Countertop Bolts, Backsplash and Tabletop Fasteners .............................. 293-294

Knock-Down and Assembly Fittings .... 294-295

Glass & Panel Clips/Misc. Fasteners ..... 295-297

Wall Anchors and Togglebolts .............. 298-299

Reinforcement Hardware ....................... 299-302

Corner Braces / Angle Irons ................... 299-302

Lag Screws / Carriage Bolts ........................... 302

It’s pretty hard to get excited about fasteners, although I’m sure there are some of you out there! We’ve got almost every type of assembly screw for cabinets, drawer slides, and hinges. Cover caps, panel clips, joint fasteners, assembly fittings and a wide variety of reinforcement braces.

282 TEL 509.535.1663 TOLL-FREE 800.888.1663 www.spokanehardware.com

Builders Hardware Specialists Since 1945

FastCap Self-Adhesive Cover CapsFASTENERS AND ACCESSORIES

YOUR SHS ACCOUNT# ______________________YOUR SHS CONTACT: _______________________

PRODUCT# QTY. DESCRIPTION PAGE#

FREQUENTLY ORDERED PRODUCTS


To Order – Call 509.535.1663 or 800.888.1663FastCap Self-Adhesive Cover Caps


FastCap Self-Adhesive Cover Caps

9/16” Self-Adhesive Cover CapsPVC - (MiniBox 260/Box)

• Self-adhesive PVC screw cover cap.• 260 /box. Sold per box.

Product # Finish Diameter

FC.MB.916.AC Autumn Cherry 9/16”

FC.MB.916.AL Almond 9/16”

FC.MB.916.AW Antique White 9/16”

FC.MB.916.BC Bourbon Cherry 9/16”

FC.MB.916.BL Black 9/16”

FC.MB.916.CM Clear Maple 9/16”

FC.MB.916.DC Dark Cherry 9/16”

FC.MB.916.DG Fog (dark) Gray 9/16”

FC.MB.916.DM Dark Red Mahogany 9/16”

FC.MB.916.GC Golden Cherry 9/16”

FC.MB.916.GO Golden Oak 9/16”

FC.MB.916.HM Hardrock Maple 9/16”

FC.MB.916.HT Heritage Cherry 9/16”

FC.MB.916.IW Imperial Walnut 9/16”

FC.MB.916.KP Knotty Pine 9/16”

FC.MB.916.LG Folkstone Gray 9/16”

FC.MB.916.LM Light Maple 9/16”

FC.MB.916.LO Light Oak 9/16”

FC.MB.916.MC Medium Cherry 9/16”

FC.MB.916.MM Manitoba Maple 9/16”

FC.MB.916.MO Medium Oak 9/16”

FC.MB.916.MW Mahogany On Walnut 9/16”

FC.MB.916.NC Natural Cherry 9/16”

FC.MB.916.NO Natural Oak 9/16”

FC.MB.916.PO Pickled Oak 9/16”

FC.MB.916.PW Presidential Walnut 9/16”

FC.MB.916.RM Red Mahogany 9/16”

FC.MB.916.RN Renaissance Oak 9/16”

FC.MB.916.SO Rosewood Oak 9/16”

FC.MB.916.SC Select Cherry 9/16”

FC.MB.916.WH White 9/16”

FC.MB.916.WW White Washed Maple 9/16”

9/16” Self-Adhesive Cover CapsPVC - (1040/Box)



FC.SP.916.AL Almond 9/16”

FC.SP.916.BL Black 9/16”

FC.SP.916.WH White 9/16”

FC.SP.916.LG Folkstone Gray 9/16”

9/16” Self-Adhesive Cover CapsUnfinished Real Wood - (MiniBox 260/Box)

• Self-adhesive unfinished real wood screw cover cap.• 260 /box. Sold per box.


FC.MB.916.AD Unfinished Alder 9/16”

FC.MB.916.AN Unfinished Anigre 9/16”

FC.MB.916.AS Unfinished Ash 9/16”

FC.MB.916.CH Unfinished Cherry 9/16”

FC.MB.916.HC Unfinished Hickory 9/16”

FC.MB.916.MG Unfinished Mahogany 9/16”

FC.MB.916.MP Unfinished Maple 9/16”

FC.MB.916.NB Unfinished Natural Birch 9/16”

FC.MB.916.PN Unfinished Pine 9/16”

FC.MB.916.RO Unfinished Red Oak 9/16”

FC.MB.916.SP Unfinished Sapele 9/16”

FC.MB.916.TK Unfinished Teak 9/16”

FC.MB.916.VF Unfinished Fir 9/16”

FC.MB.916.WA Unfinished Walnut 9/16”

FC.MB.916.WB Unfinished White Birch 9/16”

FC.MB.916.WO Unfinished White Oak 9/16”

https://www.thehardwarehut.com/catalog-product.php?p_ref=258806






















































FastCap Self-Adhesive Cover CapsFASTENERS AND ACCESSORIES

9/16” Self-Adhesive Cover CapsUnfinished Real Wood - (1040/Box)

• Self-adhesive unfinished real wood screw cover cap.• 1040 /box. Sold per box.


FC.SW.916.AD Unfinished Alder 9/16”

FC.SW.916.CH Unfinished Cherry 9/16”

FC.SW.916.MP Unfinished Maple 9/16”

FC.SW.916.PN Unfinished Pine 9/16”

FC.SW.916.RO Unfinished Red Oak 9/16”

FC.SW.916.WB Unfinished White Birch 9/16”

FC.WP.916.HM Unfinished Maple 9/16”

9/16” Self-Adhesive Cover CapsPrefinished Real Wood - (Mini Box 260/Box)

• Self-adhesive pre-finished real wood screw cover cap.• 260 /box. Sold per box.


FC.MB.916.PAN Prefinished Anigre 9/16”

FC.MB.916.PAS Prefinished Ash 9/16”

FC.MB.916.PCH Prefinished Cherry 9/16”

FC.MB.916.PMG Prefinished Mahogany 9/16”

FC.MB.916.PMP Prefinished Maple 9/16”

FC.MB.916.PPN Prefinished Pine 9/16”

FC.MB.916.PRO Prefinished Red Oak 9/16”

FC.MB.916.PSP Prefinished Sapele 9/16”

FC.MB.916.PTK Prefinished Teak 9/16”

FC.MB.916.PWA Prefinished Walnut 9/16”

FC.MB.916.PWB Prefinished White Birch 9/16”

FC.MB.916.PWO Prefinished White Oak 9/16”

3/8” Self-Adhesive Cover CapsPVC - (600/Box)



FC.MB.3/8.WH White 3/8”

Castle Cover CapsPVC

• Self-adhesive covers designed to cover Castle Machine cut-outs.• 16 cover caps/sheet.• Sold per box.

Product # Finish Size Qty/Box

FC.MB.CC.WH White 2-1/2” x 9/16” 5 sheets

FC.SP.CC.WH White 2-1/2” x 9/16” 20 sheets

Electrical Box Cover CapsPVC - (5 Sheets/Box)

• Fastcap E1 electrical box caps, self-adhesive covers.• Designed to trim the cutout for a standard 2-1/4” x 3-3/4” plastic electri-

cal box.• Each sheet contains: 1ea. electrical box trim cap and 23 ea. 9/16” diam.

Fastcaps.• 5 sheets /box. Sold per box.

Product # Finish Size

FC.MB.E1.WH White 5-9/16” x 4-1/8”

























To Order – Call 509.535.1663 or 800.888.1663D

rawer Front and Cabinet A

ssembly Screw

sFASTENERS AND ACCESSORIES

Euro Hinge Cover CapsPVC - (30/Box)

• Fastcap hinge cover cap (designed to cover 35mm dia. European hinge door preps.) self-adhesive covers.

• 6 caps/sheet.• 5 sheets /box. Sold per box.

Product # Finish Size

FC.MB.H2.5.WH White 2-1/2” x 1-1/2”

Erasable Fastpad Cover CapsPVC - (5 Sheets/Box)

• Fastcap erasable fastpads (also great for covering standard door lock 2-1/8” door preps.) self-adhesive covers.

• 4 caps/sheet.• 5 sheets /box. Sold per box.


FC.MB.FP.WH White 2-1/4”

Plumbing Cover CapsPVC - (5 Sheets/Box)

• Fastcap plumbing caps, self-adhesive covers.• Each sheet contains: 2 ea. 1/2” supply lines and 1ea. 1-7/8” waste line

cover caps.• 5 sheets /box. Sold per box.

Product # Finish

FC.MB.P1.WH White


• Fastcap plumbing caps, self-adhesive covers.• Each sheet contains: 4 ea. supply lines cover caps/sheet.• 5 sheets /box. Sold per box.

Product # Finish

FC.MB.P2.WH White


• Plumbing caps, self-adhesive covers.• Each sheet contains: 1 ea. 1/2” supply lines cover and 1ea. 2-7/16” waste

line cover caps.• 5 sheets /box. Sold per box.

Product # Finish

FC.MB.P3.WH White

Drawer Front and Cabinet Assembly Screws

Drawer Front Adjuster

• Allows for independent adjustment for drawer front.• Black plastic, screw included.• Fits into 25mm hole.• 200/box. Sold individually.

Product #

351-002-01-2662









Draw

er Front and Cabinet Assem

bly Screws


Metal Kolbe Korners

• Front-mounting bracket for shaker-style drawers.• Small, thin design, for a commercial environment.• 1-3/4”H x 3/4”W x 1/2”D.• Koble Korners & screws sold separately.• 1 pk/box. Sold per pk.

Product # Description Finish Qty/Pk

KK50PCMETALTAN Kolbe Corner Tan 50

KK50PCMETALWHITE Kolbe Corner White 50

KKMET50SCRTAN Screws Tan 50

KKMET50SCRWH Screws White 50

Assembly Screws with NibsType 17 Auger Point - Flat head, Phillips

• Black, flat head, phillips.• Type 17 auger point allows the screw to be driven into most woods

without a pilot hole.• Wide threads provide greater holding power. Less torque required in

driving.• Sold per box.

Product # Size Finish

10909 #8x1” - (1,000/Box) Black

10900 #8 x 1” - (11,000/Box) Black

10910 #8x1-1/4” - (1,000/Box) Black

10901 #8x1-1/4” - (9,000/Box) Black

10911 #8x1-1/2” - (1,000/Box) Black

10902 #8x1-1/2” - (7,000/Box) Black

10912 #8x1-5/8” - (1,000/Box) Black

10903 #8x1-5/8” - (6,000/Box) Black

10913 #8x1-3/4” - (1,000/Box) Black

10914 #8x2” - (1,000/Box) Black

10905 #8x2” - (4,000/Box) Black

10915 #8x2-1/4” - (1,000/Box) Black

10906 #8x2-1/4” - (3,000/Box) Black

10916 #9x2-1/2” - (500/Box) Black

10907 #9x2-1/2” - (2,500/Box) Black

10917 #9x3” - (500/Box) Black

10908 #9x3” - (2,000/Box) Black

Assembly Screws with NibsType 17 Auger Point - Flat Head, Square Drive

• Zinc, flat head, square drive.• Coarse thread provides greater holding power.• Type 17 auger point allows the screw to be driven into most woods

without a pilot hole.• Good for driving in woods and particle board.• #9 screws have #9 body with #8 head.• Sold per box.


12657 #8x1” - (1,000/Box) Zinc

12613 #8 x 1” - (11,000/Box) Zinc

12658 #8x1-1/4” - (1,000/Box) Zinc

12614 #8x1-1/4” - (9,000/Box) Zinc

12659 #8x1-1/2” - (1,000/Box) Zinc

12615 #8x1-1/2” - (7,000/Box) Zinc

12660 #8x1-5/8” - (1,000/Box) Zinc

12616 #8x1-5/8” - (6,000/Box) Zinc

12661 #8x1-3/4” - (1,000/Box) Zinc

12617 #8x1-3/4” - (5,500/Box) Zinc

12662 #8x2” - (1,000/Box) Zinc

12618 #8x2” - (4,000/Box) Zinc

12663 #8x2-1/4” - (1,000/Box) Zinc

12619 #8x2-1/4” - (3,000/Box) Zinc

12664 #9x2-1/2” - (500/Box) Zinc

12620 #9x2-1/2” - (2,500/Box) Zinc

12665 #9x3” - (500/Box) Zinc

12621 #9x3” - (2,000/Box) Zinc

12666 #10x3-1/2” - (250/Box) Zinc

12622 #10x3-1/2” - (1,500/Box) Zinc

12667 #10x4” - (250/Box) Zinc

12623 #10x4” - (1,000/Box) Zinc

Assembly ScrewsFlat Head, #2 Phillips

• Zinc, flat head, #2 phillips.• Coarse thread provides greater holding power.• Designed for softer woods or particle board.• Sold per box.


130QS #8x1-1/4” - (9,000/Box) Zinc

131 #8x1-1/2” - (7,000/Box) Zinc

133 #8x2” - (4,000/Box) Zinc

134QS #8x2-1/2” - (2,500/Box) Zinc

















































To Order – Call 509.535.1663 or 800.888.1663Confirm

at and Installation Screws


Drawer Front Adjuster Screw - Type 17Washer Head, Phillips

• Zinc, phillips head.• Features 1/2” diameter large round washer head for better drawer front

adjustment control.• Type 17 point for hardwood drawers.• Sold per box or individually as noted.


9023 #8x1” - (7,000/Box) Zinc

9024 #8x1-1/8” - (6,000/Box) Zinc

9025 #8x1-1/4” - (6,000/Box) Zinc

9148 #8x1” - (Each) Zinc

9149 #8x1-1/8” - (Each) Zinc

9150 #8x1-1/4” - (Each) Zinc

Confirmat and Installation Screws

Confirmat Connecting Screw w/Nibs & PointFlat Head, #3 Pozi Drive

• Zinc, Flat Head #3 Pozi Drive, coarse thread.• Industrial-strength furniture fasteners designed to ensure a tight fitting

joint between panels, as well as proving greater “pull-out” resistance and superior holding power.

• Non-hardened, require a pre-drilled pilot hole in most applications.• Features hole for optional cover cap installation(not included).• Pozi drive designed to provide higher torque in hand driving applica-

tions.• 2000/box. Sold individually.


5502C 7mm x 50mm - Coarse Thread Zinc

5502F 7mm x 50mm - Fine Thread Zinc

Confirmat Connecting Screw with NibsFlat Head, #3 Pozi Drive

• Zinc, flat head #3 Pozi Drive, coarse thread.• Industrial-strength furniture fasteners designed to ensure a tight fitting

joint between panels, as well as proving greater “pull-out” resistance and superior holding power.

• Non-hardened, require a pre-drilled pilot hole in most applications.• Features hole for optional cover cap installation(not included).• Pozi drive designed to provide higher torque in hand driving applica-

tions.• 2000/box. Sold individually.


5361C 7mm x 50mm Zinc

2-Piece M4 Connecting Screw

• Nickel plated steel, pozi head.• Clamping Range: 1-1/8” to 1-13/32” (28-36mm).• For 5mm dia. (System 32) drilling.• May be used with any other M4 thread screws to accommodate larger

material thicknesses.• The threaded sleeve is set back to facilitate screwing in the connector

screw.• 1000/box. Sold individually.


1-054-519 1-1/8” - 1-13/32” (28-36mm) Nickel

2-Piece M6 Connecting Screw

• Galvanized steel, phillips head.• Clamping range: 1-7/16” to 1-11/16” (36mm-42mm).• 8mm diameter.• Female component has ribs.• 1/box. Sold individually.


267-07-903 1-7/16” - 1-11/16” (36mm-42mm) Nickel

Cabinet Installation Screws, Quickcutter PointWasher Head, #3 Phillips

• Round washer head #3 phillips.• Features the “All-Purpose” Hi-Lo Thread. The Hi thread provides greater

holding power in wood studs. The Lo thread reduces binding in metals studs, while allowing for greater holding power.

• Quickcutter® Qx2 point allows for faster penetration and stress free driv-ing in dissimilar materials.

• Sold per box.


11986 #14x3” - (100/Box) White

11988 #14x3” - (100/Box) Black

8215 #14x3” - (1,200/Box) Zinc

8217 #14x4” - (700/Box) Zinc


















Pocket Hole/Face Fram

e Screws


Pocket Hole/Face Frame Screws

Type 17 Face Frame ScrewsModified Pan Head, Square Drive

• Designed for face frame and pocket hole assembly.• Fine Thread: for hardwoods such as oak and maple.• Coarse Thread: faster driving and superior holding in soft woods, MDF,

and particleboard.• Hi-Lo Thread: The “All-Purpose” screw, Hi-Lo thread for greater holding

and less strip-out in all woods.• Fine, QC Auger: Patented QuickCutter Double Auger for easy installation

in extremely hard woods such as oak and maple.• Plain and dri-lube finish.• Type 17 auger point for reduced torque, quicker starting and penetration

as well as reduced splitting.• Sold per box.

Product # Size Thread

3655 #6x1-1/4” - (1,000/Box) Fine

2722 #6x1-1/4” - (8,000/Box) Fine

4082 #6x1-1/4” - (8,000/Box) Fine, QC Auger

3656 #6x1-1/2” - (1,000/Box) Fine

2724 #6x1-1/2” - (7,000/Box) Fine

5600 #7x1-1/4” - (1,000/Box) Hi-Lo

4084 #7x1-1/4” - (8,000/Box) Hi-Lo

5598ZP #7X1-1/4” - (1,000/Box) Coarse

4080ZP #7X1-1/4” - (8,000/Box) Coarse

5601 #7x1-1/2” - (1,000/Box) Hi-Lo

4085 #7x1-1/2” - (7,000/Box) Hi-Lo

5599 #7X1-1/2” - (1,000/Box) Coarse

4081 #7x1-1/2” - (7,000/Box) Coarse

Type 17 Face Frame ScrewsPan Head, #2 Phillips

• Strong-Point screws designed for face frame and pocket hole assembly.• Black phosperous finish.• Sold per box.


BF1-1/2-17 #7x1-1/2” - (7,000/Box) Fine

BF1-1/4-17 #8x1-1/4” - (8,000/Box) Fine

Type 17 Face Frame ScrewsPan Head, #2 Square

• Strong-Point screws designed for face frame and pocket hole assembly.• Black phosperous finish.• Sold per box.


BF11217SQDR #7x1-1/2” - (7,000/Box) Fine

BF11417SQDR #7x1-1/4” - (8,000/Box) Fine

Drywall Screws

Drywall ScrewsBugle Head, #2 Phillips

• Strong-point coarse thread drywall screws.• Black phospherous finish; bugle head #2 phillips.• Depending on screw length used, may be be used to attach gypsum

board to wood studs, in particle board attachments, to attach double or multi-layered drywall to wood studs or for softwood framing attach-ments.

• Sold per box.


CB1 1” - (10,000/Box) Black

CB114 1-1/4” - (8,000/Box) Black

CB1-5/8 1-5/8” - (5,000/Box) Black

CB2 2” - (3,500/Box) Black

CB2-1/2 2-1/2” - (2,500/Box) Black

CB3 3” - (2,000/Box) Black

Drywall ScrewsBugle Head, #2 Phillips

• Strong-point coarse thread drywall screws.• Yellow zinc, bugle head #2 phillips.• Depending on screw length used, may be be used to attach gypsum

board to wood studs, in particle board attachments, to attach double or multi-layered drywall to wood studs or for softwood framing attach-ments.

• Sold per box.


ZC1-1/2 1-1/2” - (6,000/Box) Zinc

ZC1-1/4 1-1/4” - (8,000/Box) Zinc

ZC1-5/8 1-5/8” - (5,000/Box) Zinc

ZC2 2” - (3,500/Box) Zinc

ZC2-1/2 2-1/2” - (2,500/Box) Zinc

ZC3 3” - (2,000/Box) Zinc

ZC4 4” - (800/Box) Zinc

ZC5 5” - (500/Box) Zinc

ZC6 6” - (500/Box) Zinc


































To Order – Call 509.535.1663 or 800.888.1663H

ardware Screw


Hardware Screws

Drawer Slide Screws#6 Truss Head, Phillips

• #6 Truss head with a #8 body to provide extra strength.• Features Quickscrew® thread - 21°-25° point designed for particleboard,

but works well in all types of wood.• Sold per box or individually as noted.


5961 #8x7/16” - (1,000/Box) Zinc

5961EA #8x7/16” - (EACH) Zinc

Drawer Slide Screws#8 Low Profile Round Washer Head, Phillips

• #8 Low Profile Round Washer Head, #2 Phillips• #8 body to provide extra strength for heavier load rating of drawer slides.• Sold per box or individually as noted.


4688 #8x1/2” - (14,000/Box) Zinc

6271 #8x1/2” - (1,000/BOX) Zinc

6271EA #8x1/2” - (EACH) Zinc

Type 17 Hinge Screw#8 Truss Head, Phillips

• Features Quickscrew® thread - 21°-23° point designed for particleboard, but works well in all types of wood.

• For use with Salice Excenthree one-piece hinges.• 1000/box. Sold individually.


8098 #8 x 3/4” Zinc

Hardware Screws with Type 17 Auger PointFlat Head, #2 Square Drive

New Item!

• Deep thread, flat head, #2 square drive.• Sold per box.


13647 #6x1/2” - (1,000/Box) Nickel

13648 #6x5/8” - (1,000/Box) Nickel

13649 #6x3/4” - (1,000/Box) Nickel

Hardware ScrewsFlat Head, Phillips .275 OD

• Type 17 point, coarse thread, flat head, #2 phillips.• Designed with larger .275 outside head diameter to better fit hinge plates

and drawer slides with countersunk holes.• Sold per box.


10742 #6x1/2” - (100/Box) Nickel

10739 #6x1/2” - (1,000/Box) Nickel

10743 #6x5/8” - (100/Box) Nickel

10740 #6x5/8” - (1,000/Box) Nickel

10744 #6x3/4” - (100/Box) Nickel

10741 #6x3/4” - (1,000/Box) Nickel

Hardware ScrewsFlat Head, Phillips

• Deep thread, flat head, #2 phillips.• Sold per box or individually as noted.


5781 #5x1/2” - (EACH) Zinc

6136 #5x1/2” - (EACH) Polished Brass

5782 #5x5/8” - (EACH) Zinc



9099EA #6x1” - (EACH) Nickel

5901 #7x5/8” - (EACH) Nickel

9183 #8x5/8” - EACH Zinc

6248 #6x3/4” - 1,000/Box) Black

9217 #7x3/4” - (1,000/Box) Nickel

9178 #8x5/8” - (1,000/Box) Zinc

Hardware ScrewsFlat Head, Phillips

• Used for cabinet hinges and other miscellaneous hardware installations.• 1000/box. Sold individually.


F58X4FPAL #4x5/8” Antique Bronze

F58X4FPAN #4x5/8” Polished Nickel

F58X4FPAP #4x5/8” Polished Brass




































Hardw

are Screws


Hardware Screws

Hardware ScrewsRound Head, Phillips

• Used for cabinet hinges and other miscellaneous hardware installations.• 1000/box. Sold individually.


F58X5RPAL #5x5/8” Bronze

F58X6RPAL #6x5/8” Bronze

F58X6RPAN #6x5/8 Nickel

Cabinet Hinge ScrewsOval Head, Phillips

• Typically used for Amerock cabinet hinges or miscellaneous hardware installations.

• 200/box. Sold individually.


CM91557BB #5x5/8” Burnished Brass

CM91557M3 #5x5/8” Polished Brass

CM91657BB #6x5/8” Burnished Brass

Cabinet Hinge ScrewsFlat Head, Phillips

• Typically used for Amerock cabinet hinges or miscellaneous hardware installations.



CM92555BB #5x1/2” Antique Brass

CM92657BB #6x5/8” Antique Brass

CM92657M3 #6x5/8” Polished Brass

Machine Screws#8-32 Thread, Truss Head

• #8-32 Thread, Truss Head, Phillips/Slotted Combo drive.• Designed for cabinet knob & drawer pull attachment.• Zinc.• 100/box. Sold individually.

Product # Size

1206 #8-32 x 1/2”

1208 #8-32 x 3/4”

1196 #8-32 x 1”

1211 #8-32 x 1-1/8”

1198 #8-32 x 1-1/4”

1213 #8-32 x 1-3/8”

1200 #8-32 x 1-1/2”

1201 #8-32 x 1-5/8”

1202 #8-32 x 1-3/4”

8903 #8-32 x 1-3/4” Breakaway

1218 #8-32 x 2”

Metric Machine ScrewsM4, Truss Head

• Designed for cabinet knob & drawer pull attachment.• M4 Metric Thread, Truss Head, Phillips/Slotted Combo.• 100/box. Sold individually.

Product # Size

10950 M4x25mm (1”)

10951 M4x30mm (1-1/8”)

10952 M4x35mm (1-3/8”)

10953 M4x38mm (1-1/2”)

10954 M4x40mm (1-9/16”)

10955 M4x45mm (1-3/4”)

8892 M4x45mm (1-3/4”) Breakaway

10956 M4x50mm (2”)






























To Order – Call 509.535.1663 or 800.888.1663H

ardware Screw


Machine ScrewsPan Head, Phillips

• Machine screw for a variety of applications.• Pan head with phillips drive.• Steel, zinc plated.• 100/box. Sold individually.


10C150MPXZ 10/24 x 1-1/2” Zinc

25C150MPXZ 1/4”-20 x 1-1/2” Zinc

6C150MPXZ 6/32 x 1-1/2” Zinc

Cabinet Knob & Pull Screw

• Screw commonly use for use with retro glass cabinet knobs and pulls.• Includes washer.• 1/box. Sold individually.


5291 2-1/2” Polished Nickel

5292 2-1/2” Polished Brass

Combo Wood/Machine Screw

• Features a #8-32 machine screw on one end and a #6x5/8” wood screw on the other end.

• Perfect to surface mount cabinet knobs for breadboard and other ap-plications.



BB100 #6x5/8” x 8-32 Zinc

Door Hinge ScrewsFlat Head, Phillips

• Type 17, Self-Tapping wood screws.• For use with SGS and other residential butt hinges.• 200/box. Sold individually.


WS-3/4X9-US1D #9x3/4” Flat Black

WS-3/4X9-US3 #9x3/4” Polished Brass

WS-3/4X9-US5 #9x3/4” Antique Brass

WS-3/4X9-US10A #9x3/4” Antique Bronze

WS-3/4X9-US15 #9x3/4” Satin Nickel

WS-3/4X9-US15A #9x3/4” Antique Nickel

WS-3/4X9-US26 #9x3/4” Polished Chrome

WS-3/4X9-US26D #9x3/4” Satin Chrome

WS-1X9-US1D #9x1” Flat Black

WS-1X9-US3 #9x1” Polished Brass

WS-1X9-US5 #9x1” Antique Brass

WS-1X9-US10A #9x1” Antique Bronze

WS-1X9-US15 #9x1” Satin Nickel

WS-1X9-US15A #9x1” Antique Nickel

WS-1X9-US26 #9x1” Polished Chrome

WS-1X9-US26D #9x1” Satin Chrome

Door Hinge Wood ScrewsFlat Head, Phillips

• Commonly used with PBB and other architectural butt hinges for wood doors or frames.



1141210A #12 x 1-1/4” Antique Bronze

1141226D #12 x 1-1/4” Satin Chrome

Door Hinge Machine Screws

• Commonly used with PBB and other architectural butt hinges for metal doors or frames.



122412US10A 12/24 x 1/2” Antique Bronze

122412US26D 12/24 x 1/2” Satin Chrome





























Hardw

are Screws


858S Lag Screws

• Manufactured from steel.• Zinc plated with satin black painted finish.• Hex head.• 6 lags/package.• 5 pk/box. Sold per pk.


N179-150 5/16” x 1-1/2” Black

858B Carriage Bolts

• Manufactured from steel.• Zinc plated with satin black painted finish.• 3 bolts, nuts & washers/pack.• 5 pk/box. Sold per pk.


N179-168 5/16” x 3” Black

N179-176 5/16” x 6” Black

858S Hex Lag Screws

• Manufactured from steel.• Zinc plated with satin black painted finish.• Hex drive, round head.• 6 lags/package.• 5 pk/box. Sold per pk.


N214-130 5/16” x 1-1/2” Black

Euro Screws

Euro ScrewFlat Head, Pozi Drive

• Ideal for use on European hinges and drawer slides.• Steel, Zinc plated.• 500/box. Sold individually.


499-360-61-3015 6.3x13mm Zinc

Euro ScrewOval Head, Pozi Drive

• Ideal for use on European hinges and drawer slides.• Steel, zinc plated.• 500/box. Sold individually.


705-390-61-9715 6.3x14mm Zinc

Euro ScrewFlat Head, Pozi Drive

• Ideal for use on European hinges and drawer slides.• Steel, nickel plated.• 1000/box. Sold individually.


1220 6.3mmx10mm Nickel

6019 6.3mmx11.5mm Nickel

6020 6.3mmx13mm Nickel

5mm x 14.5mm Euro Screw - Titanium

New Item!

• Salice 5mm x 14.5mm Euro Screw to use with Salice Titanium BAR plates.• Sold individually.• 1000/box. Sold individually.


V136-X1-56 5mm x 14.5mm Titanium












To Order – Call 509.535.1663 or 800.888.1663Countertop Bolts, Backsplash &

Tabletop FastenersFASTENERS AND ACCESSORIES

8mm European Hinge Dowel and Screw

• Salice 8mm plastic dowel for use on European Hinges.• Dowel only, use with #02445-43 screws, sold separately.• 1000/box. Sold individually.

Product # Description Finish

S10E6OXY 8mm Dowel White

02445-43 #6x1/2” Spax Screw Nickel

Countertop Bolts, Backsplash &Tabletop Fasteners

Joint Fastener

• Bolt-style joint fastener applies even, controlled pressure between joint members, eliminating twisting and buckling.

• Economical and easy to install.• 1/4”-20 bolt in long-lasting, corrosion resistant zinc finish.• Plate size: 7/16” x 3/16” x 1-1/4”.• 500/box. Sold individually.

Product # Length Finish

513ZC 4” Zinc

Joint Fastener

• Quickscrews Miter Joint Fastener made from 1/4”-20 bolt.• Economical and easy to install.• Plate Size: 7/16” x 3/16” x 1-1/4”.• 500/box. Sold individually.


322 3-1/2” Zinc

Flip Bolt Countertop Connector

• The FlipBolt is fast and easy, requires no tools.• Plate size: 1” x 3/8”.• 1/box. Sold individually.


FLIPBOLT 4-1/2” Zinc

Tite-Joint Fastener

• Applies even, controlled pressure between joint members, eliminating twisting and buckling.

• Firm, solid joint can be made without glue.• Designed for 3/4” thick wood.• Center to center: 2” to 3-1/2”.• Drill bit has special shoulder to control hole depth of 5/8”. Fit 1/4” & larger

chuck.• Drill bit & guide included with full case purchase, otherwise sold sepa-

rately.

Product # Description Finish Qty/Box

516/100ZC 4” Bolt Assy. Zinc 100/box. Sold individually.

516-64 Drill Bit - 1/box. Sold individually.

Heavy Duty Desk Top Fastener

• 18 gauge stamped steel.• 1-1/4” long.• 500/box. Sold individually.

Product # Finish

1548 ZC Zinc

Table Top Fastener

• Heavy duty 14 gauge steel.• 1-1/4” L x 5/8” W.• 100/box. Sold individually.

Product # Finish

323-STL Nickel












Countertop Bolts, Backsplash &Tabletop Fasteners


Smart Clip Backsplash System

• A smart solution for applying laminate countertop backsplashes.• Easy to install, waterproof, and allows you to form fit a backsplash to

nearly any wall surface in minutes.• No visible caulk, no metals.

Product # Description Qty/Box

SMARTCLIPS Backsplash Connectors 250/box. Sold individually.

5BSB Spacing Bar

1/box. Sold individually.8SDG Screw Depth Gauge

SC-1 Router Bit

Knock-Down and Assembly Fittings

Allen “15” Connecto-Lock

• 1/4”-20 threads to fit Selby barrel nuts (KGB97,KGB98, KGB98U) for rapid secure jointing.

• Bolt head is 9/32” (15mm) diameter and is 3/32” (2mm) thick.• Use with the Selby Allen Socket wrench (F580ALKEY4).• 100/box. Sold individually.


F1551L 2” Bronze

F1563L 2-1/2” Bronze

F1576L 3” Bronze

F580ALKEY4 #4 Allen Wrench Steel

Steel Barrel Nut

• 1/4”-20 threaded to mate with the Selby “15” Connecto-Locks for rapid secure jointing.

• 3/8” (9mm) diameter.• 50/box. Sold individually.


KGB97EXU 9/16” L - Off Center Hole Steel

KGB98EXU 3/4” L - Off Center Hole Steel

KGB98U 3/4” L - On Center Hole Steel

“Snap-It” Rigid Panel Connector/Lid Hinge

• Size: 3/4” x 3/4”.• 2-piece snap-together connector that can be assembled and disassem-

bled hundreds of times without loss of strength or rigidity.• Resists up to 185 lbs. pullout force! Made of special molded thermoplas-

tic resin resistant to temperature variations, chemicals and aging.• Can be used horizontally as a lid pivot hinge.• Attaches with only two #5 flat head mounting screws (sold separately).• 50/box. Sold individually.

Product # Finish

K6100S Black

Interlocking Flushmounts

• Strong versatile hanger for wall-panels, wall-hung cabinets, pictures, mir-rors, headboards, displays, etc...

• Only 1/8” thick when assembled.• Extra heavy, extra strong.• Requires #6 flat head mounting screws (sold separately).• 50 set/box. Sold per set.

Product # Finish

K418MINIZ Zinc

K418Z Zinc

Extra Heavy Corner Joints

• Heavy gauge steel wedge-action corner jointing for on-the-job assembly.• For wood parts 4”-8” wide, wider units may use two assemblies.• Zinc-plated on 0.106” steel.• Requires (32) - #8 flat head mounting screws (sold separately).• Set contains: 8 pieces (four corners).• 1 set/box. Sold per set.


K65100-11 3-3/4” x 7/8” x 7/8” Zinc

















To Order – Call 509.535.1663 or 800.888.1663G

lass & Panel Clips/M

isc. FastenersFASTENERS AND ACCESSORIES

Rapid Corner Joints

• Strong corner jointing for rapid assembly• Ideal for use on partitions, shelving, counters, cases etc.• Lighter use .060 medium grade steel, zinc plated.• Requires (8) - #5 flat head mounting screws (sold separately).• Set contains: 2 interlocking “lefts” and 2 “rights” (2 corners).• 1 set/box. Sold per set.


K280SM 1-1/2” x 3/4” x 3/4” Zinc

Keyhole Joint Fittings

• Keyholes provide rigid connection with #10 round head screws (sold separately).

• 0.095 gauge cold rolled steel, zinc plated.• 50/box. Sold individually.


K2093Z 3”L x 9/16”W Zinc

K2094Z 1-5/8” x 9/16”W Zinc

Heavy Duty Keyhole Joint Fitting

• Keyholes enlarged for #12 round head screws (not included) for super-strong joints.

• 0.125 gauge cold-rolled steel, zinc plated.• 50/box. Sold individually.


K1094Z 1-3/4”L x 5/8”W Zinc

Keyhole Hanger Plate

• 1/8” thick steel, zinc plated.• Use with #10 x 3/4” flathead wood screws, not included.• 100/box. Sold individually.


521ZC 2”L x 13/16”W Zinc

Glass & Panel Clips/Misc. Fasteners

Panel Clips

• For securing glass or decorative panels on doors and other mounting applications.

• Made of plastic, screws not included.• 100/box. Sold individually.


1803CL-32 Flush Clear

1803T-32 Flush Tan

1813CL-32 1/8” offset Clear

1823CL-32 3/16” offset Clear

Flush Panel Clip

• Overall size: 7/8”L x 1/2”W x 1/8” projection.• Secures glass or decorative panels in routed recesses on doors and other

mounting applications. • Made of plastic, screws not included.• 1/box. Sold individually.


1820BK-52 Flush Black

Glass/Panel Clip

• Overall size: 1-1/2”L x 5/8”H.• Unique design allows glass or panels to be mounted without routing.• Installs with screws or staples (not included).• Made of plastic.• 250/box. Sold individually.


1806CL-42 1/8” Lip Clear


















Glass &

Panel Clips/Misc. Fasteners


Glass/Panel Corner Clip

• Overall size: 1-1/2”H x 1-1/2”W.• Unique design allows glass or panels to be mounted without routing.• Installs with screws or staples (not included).• Made of plastic.• 250/box. Sold individually.




False Front Clips - For 3/4” Material

• Permits false front panel above sink doors to be easily snapped into place• For use with 3/4” thick face frame material.• Fasteners not included.• 100/box. Sold individually.

Product # Finish

1931-32 Clear

1987-32 White

False Front Block

• Overall Size: 5-1/2”L x 3/4”W x 1”H.• Allows false front panels to be easily installed and removed with a simple

twist.• For use with 3/4” face frames and a drawer opening height of 4-1/2”.• Install with single 1” long flat head screw in center hole (not included).• 100/box. Sold individually.

Product # Finish

4300-32 Natural

Cranked Mirror Clip

• Mirror clip for 1/4” thick glass.• 3/4” wide.• Uses two #5 pan head screw (not included).• Steel, nickel plated.• 1/box. Sold individually.

Product #

291-21-015

Mirror Clip

• For 1/4” glass.• Clear plastic, screw included.• 100/box. Sold individually.

Product #

6092-PLAS

Glass/Grille Panel Retainer

• Size: 3/8”W x 1-3/16”H.• Reversible to accommodate various glass thickness and door mortise.• Vinyl tipped screw is adjustable to tighten and adjust without harming

glass.• Steel, bronze finish.• 1/box. Sold individually.

Product # Finish

X302-78L Bronze

Finish Washers

• #8 finish washers.• 100/box.• 1 /box. Sold per box.

Product # Finish

10498 Black

1998 Nickel












To Order – Call 509.535.1663 or 800.888.1663G

lass & Panel Clips/M

isc. FastenersFASTENERS AND ACCESSORIES

Solid Brass Round Screw Covers - Dimpled

New Item!

• Perfect solution for exposed screws.• Includes threaded insert, mounting screw not included.• 50/box. Sold individually.

Product # Finish

SCD100U10B Oil Rubbed Bronze

SCD100U15 Satin Nickel

Solid Brass Round Screw Covers - Flat

New Item!

• Perfect solution for exposed screws.• Includes threaded insert, mounting screw not included.• 50/box. Sold individually.

Product # Finish

SCF100U10B Oil Rubbed Bronze

SCF100U15 Satin Nickel

Space Balls Cabinet Panel Spacers

• SpaceBalls stop panel rattle and eliminate cracking glue joints.• 1/4” diameter.• 8-10 recommended per door.• For best expansion joint, compress Space Balls to 1/2 their size after as-

sembly.• 1 bag/box. Sold per bag.

Product # Qty/Bag

260P-1M 1000

260P-5M 5000

Door and Drawer Shipping Clipfor Small Cabinet Doors

• Designed to hold cabinet drawers and doors shut during shipping.• Easy to install, clip over face frame and close the door/drawer to engage.• Designed for 1/2” overlay cabinets. • For doors and drawer fronts that are either 5/8” thick with square edges

or 3/4” thick with a profiled edge.• Made of plastic.• 100/box. Sold individually.

Product # Finish

1991-32 Natural

Door and Drawer Shipping ClipFor Large Cabinet Doors

• Designed to hold cabinet drawers and doors shut during shipping.• Easy to install, clip over face frame and close the door/drawer to engage.• Designed for 1/2” overlay cabinets. • For doors and drawer fronts that are either 5/8” thick with square edges

or 3/4” thick with a profiled edge.• Made of plastic.• 100/box. Sold individually.

Product # Finish

19014-32 Natural











Wall A

nchors and ToggleboltsFASTENERS AND ACCESSORIES

Wall Anchors and Togglebolts

Self Drilling E-Z Toggle

• Heavy-duty drywall anchor hangs up to 85 lbs. shear strength.• Installs with a #2 phillips screwdriver.• Includes a #8 x 2-1/8” long screw.• 50/box. Sold individually.

Product # Finish

051-17-911 Zinc

#8 EZ Wall Anchor

• Just what you need for cabinet installations and many other interior and exterior installations.

• Screws not included.• 100/box. Sold individually.

Product # Description

1436 Metal, Zinc

1934 Nylon, White

#8 Self Drilling Drywall Anchor

• Light-duty anchors are designed for fast installation into drywall.• For 3/8” – 1” thick wallboard or drywall.• Works with a #8 pan head screw (sold separately).• 100/box. Sold individually.

Product # Description

DWAN8 Plastic, White

DWAS8 Metal, Zinc

SnapToggle Anchor System3/16”-24 Toggle Bolt

• SNAPTOGGLE heavy-duty toggle bolts carry twice the load in a smaller hole than standard wing anchors.

• Bolt does NOT spin when installed with a screw gun.• Patented strap design with sturdier straps and smaller ratchet interval

adjusts more precisely and snaps off flush to the surface.• Anchor installs behind 3/8” – 3-5/8” wallboard, drywall and hollow

masonry.• Use with 3/16”-10/24 thread size bolts, packaging as listed.


24013 SnapToggle - 100/Box, No BoltsSold per box.

25013 SnapToggle - 50/Box, No Bolts

50375 SnapToggle - 10/Bag with BoltsSold per bag.

50350 SnapToggle - 2/Bag with Bolts

10C150MPXZ 10/24 x 1-1/2” Bolts - 100/Box Sold individually.

SnapToggle Anchor System1/4”-20 Toggle Bolt

• SNAPTOGGLE heavy-duty toggle bolts carry twice the load in a smaller hole than standard wing anchors.

• Bolt does NOT spin when installed with a screw gun.• Patented strap design with sturdier straps and smaller ratchet interval

adjusts more precisely and snaps off flush to the surface.• Anchor installs behind 3/8” – 3-5/8” wallboard, drywall and hollow

masonry.• Use with 1/4”-20 thread size bolts, packaging as listed.


24014 SnapToggle - 100/Box, No BoltsSold per box.

25014 SnapToggle - 50/Box, No Bolts

50400 SnapToggle - 2/Bag with BoltsSold per bag.

50425 SnapToggle - 10/Bag with Bolts

25C150MPXZ 1/4”-20 x 1-1/2” Bolts - 100/Box Sold individually.

















To Order – Call 509.535.1663 or 800.888.1663Reinforcem

ent Hardw

areFASTENERS AND ACCESSORIES

KapToggle Wall Anchor

This 3-piece anchor consists of a metal toggle bent at two 90° angles with an internally threaded hole at its center, a serrated nylon strap that extends from both sides of the metal toggle and a shoulder washer that slides down the strap and fits snug into the pre-drilled hole on the front side of the assembly. Upon installation, extra length of the strap snaps off.• May be used on hollow wall or masonry block, can be reused.• Easy, one-person installation.• Eliminates need for extra long screws required with other wall anchors.• Toggle length: 1-1/2”; Required hole size: 13/32”.• Use with 1/8” bolts, sold separately.


348948 KapToggle Anchor 500/box. Sold individually.

6C150MPXZ 6/32 (1/8”) x 1-1/2” Bolt 100/box. Sold individually.

Reinforcement Hardware

Corner Brace

• 1” H x 1”W.• Use 3/4” No.10 flat head wood screws (sold separately).• 100/box. Sold individually.


341-ZC 1” x 1” Zinc

Chair Leg/Corner Braces

• Reinforce inside right angle corner joints.• Ideal for bracing chair and table legs.• Brown lacquered finish.• 4/card with mounting screws.• 10 card/box. Sold per card.

Product # Size

S730-300 1-1/4” x 1-1/4”

Corner Braces

• Designed for chests, screens, windows, furniture, etc.• Used for reinforcing inside of right angle corner joints.• Screw holes are countersunk.• Durable steel construction with a zinc plated finish.• Screws not included.• 40/box. Sold individually.

Product # Size

N266-270 1” x 1/2”

N266-304 1-1/2” x 5/8”

N266-361 2” x 5/8”

N266-338 2-1/2” x 5/8”

N266-395 3” x 3/4”

N220-152 5” x 1”

Economy Corner Braces

• Perfect for smaller pieces of furniture.• Galvanized steel with a zinc finish.• Screws not included.• 200/box. Sold individually.

Product # Size

RL311 1” x 1”

RL7430 1-3/16” x 1-3/16”

RL7440 1-9/16” x 1-9/16”

RL7450 2” x 2”

RL7470 2-3/4” x 2-3/4”

Mending Plate

• Reinforces flat surface joints, seams and cracks.• Zinc finish, rust resistant.• Screws not included.• 40/box. Sold individually.

Product # Size

N272-732 4” x 5/8”



















Reinforcement H

ardware


Heavy Duty Corner Brace

• Used for reinforcing inside of right angle corner joints.• Heavy duty steel, zinc plated finish.• Screw holes are countersunk, screws not included.• 10/box. Sold individually.

Product # Size

N337-709 2” x 2”

1151BC Corner Brace

• Slots for 5/16” carriage bolt.• Black powder coat finish for improved weather resistance.• 5/box. Sold individually.

Product # Length Width Thickness Finish

N351-463 3-1/8” 1-1/2” 1/8” Black

N351-464 5-1/8” 1-1/2” 1/8” Black

N351-465 7-1/8” 1-1/2” 1/8” Black

N351-466 6-1/4” 1-1/2” 1/4” Black

N351-467 8-1/4” 1-1/2” 1/4” Black

N351-468 10-1/4” 1-1/2” 1/4” Black

N351-469 12-1/4” 1-1/2” 1/4” Black

1211BC Corner Brace - 45° Holes

• Clearance for 5/16” bolt or 2 nails per side.• Black powder coat finish for improved weather resistance.• Thickness: 1/8”.• 5/box. Sold individually.

Product # Length Width Finish

N351-482 1-5/8” 1-1/2” Black

1156BC/1157BC Corner Brace-Chamfered

• Slots for 1/2” carriage bolt.• Larger bolt holes provide options for structural support.• Black powder coat finish for improved weather resistance.• Thickness: 1/8”.• 5/box. Sold individually.


N351-500 4-15/16” 3” 1/8” Black

N351-501 6-1/4” 3” 1/4” Black

1154BC Square Corner Brace-Rounded

• Slots for 1/2” carriage bolt; single holes for easy installation.• Rounded corners provide clean look.• Black powder coat finish for improved weather resistance.• 5/box. Sold individually.


N351-496 2-3/8” 3” 1/8” Black

N351-497 2-3/8” 3” 3/16” Black

1217BC Square Corner Brace-Chamfered

• Slots for 5/16” carriage bolt.• Black powder coat finish for improved weather resistance.• 5/box. Sold individually.


N351-494 2-3/8” 3” 1/8” Black

N351-495 2-3/8” 3” 3/16” Black

















To Order – Call 509.535.1663 or 800.888.1663Reinforcem

ent Hardw

areFASTENERS AND ACCESSORIES

1212BC Wide Corner Brace

• 3/8” diameter holes.• Wider width provides greater area of stability.• Black powder coat finish for improved weather resistance.• Thickness: 1/8”.• 5/box. Sold individually.

Product # Height Width Finish

N351-483 1-5/8” 3” Black

N351-484 1-5/8” 5” Black

N351-486 1-5/8” 7” Black

1213BC Wide Corner Brace w/Square Corners

• Thickness: 1/8”. 3/8” diameter holes.• Wider width provides greater area of stability.• Black powder coat finish for improved weather resistance.• 5/box. Sold individually.


N351-487 1-5/8” 9” Black

1214BC Wide Corner Brace - Structural

• Slots for 1/2” carriage bolt.• Wider width provides greater area of stability.• Black powder coat finish for improved weather resistance.• Thickness: 1/8”.• 5/box. Sold individually.


N351-488 2-1/8” 5” Black

N351-489 2-1/8” 7” Black

N351-491 2-1/8” 9” Black

1216BC Wide Corner Brace - Structural

• Thickness: 1/4”. Slots for 1/2” carriage bolt.• Wider width provides greater area of stability.• Black powder coat finish for improved weather resistance.• 5/box. Sold individually.


N351-492 3” 4-5/8” Black

N351-493 3” 6-5/8” Black

1181BC Mending Plate - Long

• For reinforcing, attaching, connecting, aligning, and splicing materials.• Thickness: 1/8”. Slots for 5/16” carriage bolt.• Black powder coat finish for improved weather resistance.• 5/box. Sold individually.


N351-455 6” 1-1/2” Black

N351-456 10” 1-1/2” Black

N351-457 14” 1-1/2” Black

N351-458 16” 1-1/2” Black

N351-459 20” 1-1/2” Black

N351-461 24” 1-1/2” Black

1182BC Mending Plate - 45° Holes

• Used for reinforcing two miter joint pieces that create a 90° angle.• Clearance for 5/16” bolt or 2 nails per side.• Black powder coat finish for improved weather resistance.• Thickness: 1/8”.• 5/box. Sold individually.


N351-454 3” 1-5/16” Black



















Reinforcement H

ardware


1183BC Rectangular Mending Plate - Chamfered

• Used for attaching, connecting, aligning, and splicing materials.• Slots for 1/2” carriage bolt.• Black powder coat finish for improved weather resistance.• Thickness: 1/8”.• 5/box. Sold individually.


N351-453 9-1/2” 3” Black

1184BC Rectangular Mending Plate

• Used for attaching, connecting, aligning, and splicing materials.• Slots for 5/16” carriage bolt.• Black powder coat finish for improved weather resistance.• Thickness: 1/8”.• 5/box. Sold individually.

Product # Finish Length Width

N351-462 Black 4-3/4” 3”

1175BC Corner Plate

• Slots for 5/16” carriage bolt.• Black powder coat finish for improved weather resistance.• Thickness: 1/8”.• 5/box. Sold individually.


N351-504 4-1/2” 1-1/2” Black

N351-505 6-1/2” 1-1/2” Black

1176BC Corner Plate

• 5/8” diameter hole.• Plate width and bolt hole locations provide options for structural sup-

port.• Black powder coat finish for improved weather resistance.• Thickness: 1/8”.• 5/box. Sold individually.


N351-506 6” 3” Black

858S Lag Screws

• Hex head; Manufactured from steel.• Zinc plated with satin black painted finish.• 6 lags/package.• 5 pk/box. Sold per pk.


N179-150 5/16” x 1-1/2” Black

858S Hex Lag Screws

• Hex drive, round head; manufactured from steel.• Zinc plated with satin black painted finish.• 6 lags/package.• 5 pk/box. Sold per pk.


N214-130 5/16” x 1-1/2” Black

858B Carriage Bolts

• Manufactured from steel.• Zinc plated with satin black painted finish.• 3 bolts, nuts & washers/pack.• 5 pk/box. Sold per pk.


N179-168 5/16” x 3” Black

N179-176 5/16” x 6” Black










Fasteners and Accessories 281-302 - Spokane Hardware Supply · 2016-11-22 · YOUR SHS ACCOUNT#...

Documents

Transcript of Fasteners and Accessories 281-302 - Spokane Hardware Supply · 2016-11-22 · YOUR SHS ACCOUNT#...