FAST-STRIP TECHNICAL INFO · Use FAST-STRIP to remove acrylic curing compound, yellowed arylic...
Transcript of FAST-STRIP TECHNICAL INFO · Use FAST-STRIP to remove acrylic curing compound, yellowed arylic...
FAST-STRIPPRODUCTDESCRIPTION
FAST-STRIP is a chemical agent specifi cally designed to remove curing, tire marks, acrylic coatings, waxes, paint, oil and grease stains from concrete fl oors in preparation for the FAST-GRIND polishing system.
Use FAST-STRIP to remove acrylic curing compound, yellowed arylic coatings, waxes, paint and tire marks, carpet and tile mastic, asphalt residue, construction chalk and tape residue. FAST-STRIP substantially lightens oil and grease stains and permanent marker ink.
WWW.FAST-GRIND.COM
FAST-STRIPPRODUCTDESCRIPTION
FAST-STRIP is a chemical agent specifi cally designed to remove curing, tire marks, acrylic coatings, waxes, paint, oil and grease stains from concrete fl oors in preparation for the FAST-GRIND polishing system.
Use FAST-STRIP to remove acrylic curing compound, yellowed arylic coatings, waxes, paint and tire marks, carpet and tile mastic, asphalt residue, construction chalk and tape residue. FAST-STRIP substantially lightens oil and grease stains and permanent marker ink.
WWW.FAST-GRIND.COM
TECHNICAL INFO
Shape
Infl ammation temp.
Density (20 °C)
pH:
Packaging
Consumption
Storage
Storage life
Applications
Transparent liquid, colorless to yellowish
> 47 °C
0,874 ± 0,01
Not applicable
25 L bottles200 L drums
5 to 20 m²/l (depends on the level of pollution).
Keep closed package in cool and well ventilated room. Protect against moisture
1 year
Determined by the type and condition of material to be strippedand its thickness in millimeters.ADVANTAGES
FAST-STRIP + Easy to apply + Works fast (30 minutes) + Requires little scrubbing because it works chemically + Citrus odor. No hazardous-solvent chemical fumes + Low price
HOWTO USE
Sweep the area that needs to be stripped.
Mechanically blend FAST-STRIP before each use.
Apply FAST-STRIP onto a wet fl oor with a sprayer or watering can.
Use pads or a scrubber to wark FAST-STRIP into the concrete fl oor and to distribute the product evenly.
Let the product sit for a full 30 minutes before removing it and ensure the surface remains wet.
After 30 minutes, immediately remove all FAST-STRIP residue with an automatic scrubber and high-pH detergent (we recommend FAST-CLEAN). Scrub all treated surfaces twice.
SPECIAL CONSIDERATIONS
• Don’t let the product dry in• Dispose waste in compliance with your local law
HEALTH ANDPROTECTION
Safety isn’t expensive, it’s priceless. Always work safe!
• Wear safety shoes, safety glasses, gloves, a helmet and other protective clothing.
• When working with chemicals, wear a mouth mask.• Avoid excessive breathing of vapors or mists, especially in poorly
ventilated areas. • Avoid contact with eyes, skin or clothing. Wash thoroughly after
handling.• When feeling unwell or experiencing irritation on skin, eyes or
inhalation, consult a doctor immediately.• Consult the MSDS for more detailed information.
TECHNICALSUPPORT
Technical questions? Don’t hesitate to contact your local distributor.
Distributor stamp