Faro Ls Catalog

FARO Laser Scanner

beckerk

Text Box

Product Catalog Language: English-US August 2009

beckerk

Text Box

Copyright 2009, FARO Technologies Inc.

FARO Product CatalogFARO Laser ScannerEnglish - US

Laser Scanner Systems --> PHOTON

Laser Scanner Systems

PHOTON

S-PHOTON120x: Laser Scanner Photon 120

FARO Photon 120 Laser Scanner. Including inclination sensor. 1 license FARO Record - recording software. 1 license FARO Scene - analysis software. Transport case., Ethernet cable, Connector box, Communication cable, 24 V power supply (90V to 285V), 2 pairs of laser-safety glasses, and Electronic user manual. Includes 1 year standard warranty.

S-PHOTON120x-UNI: Photon 120 (University)

FARO Photon 120 Laser Scanner. Including inclination sensor. 1 license FARO Record - recording software. 10 licenses FARO Scene - analysis software. Transport case, Ethernet cable, Connector box, Communication cable, 24 V power supply (90V to 285V), 2 pairs of laser-safety glasses and Electronic user manual.

S-PHOTON20x: Laser Scanner Photon 20

FARO Photon 20 Laser Scanner. Including inclination sensor. 1 license FARO Record - recording software. 1 license FARO Scene - analysis software. Transport case, Ethernet cable, Connector box, Communication cable24 V power supply (90V to 285V), 2 pairs of laser-safety glasses, Electronic user manual, Includes 1 year standard warranty.

S-UPGD-LS420-P20x: Upgd. LS 420 - Photon 20

Upgrade an existing FARO Laser Scanner LS 420 to latest speed, accuracy and noise specification.Includes a new distance module, USB2 interface within the PC module, new connector boards and update of the scanner firmware.The existing housing of the LS will remain.Prerequisite: active maintenance contract for the existing scanner.

S-UPGD-LS880-P120x: Upgd. LS 880/840 - Photon 120

Upgrade an existing FARO Laser Scanner LS 880 or LS 840 to PHOTON 120 speed, accuracy and noise specification. Includes a new distance module, USB2 interface within the PC module, new connector boards and update of the scanner firmware.The existing housing of the LS will remain.Prerequisite: active maintenance contract for the existing scanner.

S-UPGD-P08-PX: Upgd. 2008 Photon

Upgrade an existing 2008 FARO Laser Scanner Photon to latest speed, range, accuracy and noise specification.2008 Photon 20 --> Photon 202008 Photon 80 --> Photon 120Incl. update of the scanner firmware.The existing housing of the LS will remain.Prerequisite: active maintenance contract for the existing scanner.**Delivery not before August 2009**

S-UPGD-P20x-P120x: Upgd. Photon 20 - Photon 120

Upgrade an existing FARO Laser Scanner Photon 20 to latest range, accuracy and noise specification of a Photon 120. Incl. update of the scanner firmware. The existing housing of the LS will remain. Prerequisite: active maintenance contract for the existing scanner. **Delivery not before August 2009**

August 2009Copyright 2009, FARO Technologies Inc.


Accessories --> Targets and Prisms --> LS Spheres, Prisms, Adapters

Accessories

Targets and Prisms

LS Spheres, Prisms, Adapters

ACCSS0206: Registration Spheres - Rugged Starter Kit

Complete Starter kit for Laser Scanner consisting of 5 Registration Spheres Ø 145mm (ACCSS0208) with magnetic mounts (ACCSS0207) and gloves (ACCSS0253) in a rugged transport case (ACCSS0252).

ACCSS0207: LS Magnetic Mounts - spare part

Set of 5 Magnetic Mounts for Mounting of Registration Spheres or prism kit.

ACCSS0208: Registration Spheres for Laser Scanner LS - spare part

Set of 5 Registration Spheres. Ø 145mm. These Spheres are especially designed to be used as refererences for the FARO Laser Scanner LS. Magnetic mounts (ACCSS0207) and transport case are NOT included.

ACCSS0211: Prism - spare part

Prism measuring Registration Sphere locations with total station. -34mm offset. Magnetic mount and thread adapter are NOT included. Spare part.

ACCSS0212: Prism Height/Thread Adapter - spare part

Offset height and thread adapter for Prism for Laser Scanner LS. Spare part.

ACCSS0217: Prism Kit for Laser Scanner LS

Prism kit including thread adapter and Magnetic Mount (ACCSS0211 and ACCSS0212) for measuring LS Registration Sphere positions with total station. - horiz offset -34mm; vertical offset 72.5mm.

ACCSS0253: Gloves for LS starter kit - spare part

Gloves to handle Laser Scanner registration spheres. Spare part.

ACCSS0268: Double Starter Kit

Double Starter Kit consisting of 10 registratation spheresØ 145mm with 10 magnetic mounts and 2 pairs of gloves in two rugged transport cases (2x ACCSS0206).

ACCSS0269: SuperSpheres System Kit 1

SuperSpheres System Kit 1. Registration spheres for increased accuracy demands. Consists of: 2x SuperSphere 200mm, 1x Special Prism, 3x Tribrach Adapter, 10x Fixing Washers, and 1x Rugged Transport Case



Accessories --> Targets and Prisms --> LS Spheres, Prisms, Adapters

ACCSS0270: SuperSpheres System Kit 2

SuperSpheres System Kit 2. Registration spheres for increased accuracy demands. Consists of: 2x SuperSphere 200mm, 2x Tribrach Adapter, 10x Fixing Washers, and 1x Rugged Transport Case

ACCSS0271: SuperSpheres Medium Kit

SuperSpheres Medium Kit. Registration spheres for increased accuracy demands. Consists of: 6x SuperSphere 140mm, 50x Fixing Washers, and 1x Rugged Transport Case

ACCSS0272: SuperSpheres Large Kit

SuperSpheres Large Kit. Registration spheres for increased accuracy demands. Consists of: 3x SuperSphere 200mm, 50x Fixing Washers, and 1x Rugged Transport Case

Mounts

Base Plates and Mounts

ACCSS0022: Tribrach Mount for Laser Scanner LS - spare part

Tribrach Mount for Laser Scanner LS - spare part.

Stands and Tripods

11557: Dolly for LS Tripod

Dolly for LS tripod with large, individually braked wheels. Folds for transporting.

ACCSS0232: Tripod - Carbon Fiber tripod w/ crank for Laser Scanner LS

Carbon Fiber Tripod w/ 3 telescoping segments; Max. height: ca. 151cm; Weight: ca. 3kg; Load: max 25kg; Including geared column (20cm) and thread adapter to mount the 5/8" thread of the Laser Scanner LS. Necessary for Color Option.

ACCSS0265: Aluminum tripod, geared column

Telescoping aluminum tripod with a geared center column for Laser Scanner. The adjustable center column has a rugged gear box and a ruler to exactly define the height of the scanner.

Adapters and Risers

ACCSS0227: LS Mounting Adapter for Faro Laser Tracker tripods

Using this mounting adapter, the Laser Scanner LS can be mounted on any tripod of Faro´s Laser Tracker product line.

ACCSS0231: 5/8" Thread adapter for Carbon Fiber tripod for Laser Scanner LS - spare part

Thread adapter to fit a photo tripod thread to the 5/8" thread of the Laser Scanner LS for Carbon Fiber tripod (ACCSS0232). Spare Part.



Accessories --> Computers

Computers

ACCSS0267: PC Module for Photon laser scanner to swap with original PC Module

One extra PC module for the PHOTON Laser Scanner in order to exchange with the original PC module to store confidential data in separation from non confidential data. Including one Transport Case.

Computing Accessories

ACCSS0250: SuperMobile LS pda ONLY - EN - no wifi stick

Apple iPod touch with 16GB memory to control the FARO Laser Scanner LS via WiFi.The user interface of the iPod touch is available in the following languages: English, French, German, Japanese, Dutch, Italian, Spanish, Portuguese, Danish, Finnish, Norwegian, Swedish, Korean, Simplified Chinese, Traditional Chinese, Russian, and Polish. [ACCSS0250]

ACCSS0251: SuperMobile LS pda set - EN

Apple iPod touch with 16GB memory to control the FARO Laser Scanner LS via WiFi. Including WiFi stick for the Laser Scanner LS.The user interface of the iPod touch is available in the following languages: English, French, German, Japanese, Dutch, Italian, Spanish, Portuguese, Danish, Finnish, Norwegian, Swedish, Korean, Simplified Chinese, Traditional Chinese, Russian, and Polish. [ACCSS0251]

COMP0115: Notebook-Power User

Notebook-Power User. Power User high-end notebook computer for use with ScanArm and Laser Scanner systems. Optional upgrade for FaroArm and Laser Tracker systems. Contact your FARO representative for current specifications.

COMP0115-x64: Notebook-Power User, 64bit Vista

Notebook-Power User. Power User high-end notebook computer with Windows Vista 64bit operating system for use with ScanArm and Laser Scanner systems. Optional upgrade for FaroArm and Laser Tracker systems. Contact your FARO representative for current specifications

Other

Color Option

ACCSS0234: Color option - Camera rack D200 only

Camera rack for NIKON D200 for the parallax free mount. Mount not included (ACCSS0228); Spare part.

ACCSS0235: Color option - Camera rack D70s only

Camera rack for Nikon D70s for the parallax free mount. Mount not included (ACCSS0233); Spare part.

ACCSS0254: High End Camera NO accessories

Nikon Camera - High End Version including kit lens.



Accessories --> Other --> Color Option

ACCSS0255: Transport Case High End Camera

Transport case for high end camera.

ACCSS0256: Press-on Mount High End Camera

Mount for High End Camera. Fixation on the laser scanner by press-on screws. Does NOT contain the High End Camera.

ACCSS0257: High End Camera w/o mount

High End Camera with kit lens. Including fisheye lens and transport case.

ACCSS0258: High End Camera Set Press-on

High End Camera with kit lens, including fisheye lens, press-on mount and case. Enables capturing of colored laser scans.

ACCSS0260: Pin Mount UPGRADE

Upgrade for owners of a former camera mount WITHOUT fixing pins. PREREQUISITE: Scanner needs to have bushings in the side wings of the frame.

ACCSS0261: Press-on Mount UPGRADE

Upgrade for owners of a former camera mount.Scope of delivery: Press-on mount for scanners without bushings ind the side wings of the frame.

ACCSS0262: Pin Mount High End Camera

Mount for High End Camera. Fixation on the laser scanner by fixing pins. PREREQUISITE: Scanner needs to have bushings in the side wings of the frame. Does NOT contain the High End Camera.

ACCSS0263: High End Camera Set Pin Mount

High End Camera with kit lens, including fisheye lens, fixing-pin mount and case. Enables capturing of colored laser scans. PREREQUISITE: Scanner needs to have bushings in the side wings of the frame.

Cases

11796: Heavy Duty Transport Case for carbon fiber tripod (ACCSS0232)

Heavy Duty Transport Case for carbon fiber tripod (ACCSS0232).

11797: Heavy Duty Transport Case for aluminum tripod (ACCS0214)

Heavy Duty Transport Case for aluminum tripod (ACCS0214).



Accessories --> Other --> Cases

ACCSS0025: LS Scanner Transport Case

Transport Case for LS Scanner including foam kit.

ACCSS0226: Rucksack for the Laser Scanner LS

Super Mobile LS Rucksack allows you to conveniently carry the Laser Scanner LS in a padded backpack. Not for shipping use.

ACCSS0249: PowerBase Battery Case- spare part

Rugged transport case with foam inlay for PowerBase Battery, Charger and Cable. (Spare Part).

ACCSS0252: LS Rugged Sphere Case - spare part

Rugged plastic case with foam inlay to safely transport up to 5 registration spheres. Cases are stackable. Registration spheres not included. Spare part.

Cables, Cords and Batteries

10630-001: Lemo Connector cable LS - 5m

Lemo connection cable for FARO Laser Scanner LS. Supplies power and communication to scanner. Length 5m. [10630-001]

10630-002: Lemo Connector cable LS - 30m

Lemo connection cable for FARO Laser Scanner LS. Supplies power and communication to scanner. Length 30m. [10630-002]

11826: Power User Notebook Media Drive Bay Auxiliary Battery

48 WHr 6-Cell Secondary Media Bay Battery for Power User Notebook almost doubles battery life in the field and approved for use with FARO measurement systems. (Internal optical drive cannot be used in conjunction with battery).

ACCSS0213: A/C Connector box

Connector Box for the FARO Laser Scanner LS including emergency kill-switch button and ethernet port to communicate with external notebook. To be used with A/C power supply only.

ACCSS0214: Ethernet Cross-Over Cable

Ethernet cross-over cable for FARO Laser Scanner LS needed to for scanner/notebook communication. Includes water-resistant connector to be plugged to connector box or battery kit. 3m length.

ACCSS0215: A/C Power Supply

A/C Power supply for connector box of FARO Laser Scanner LS. Outputs 24VDC/4, 1A, Lemo plug. US/EU voltage input compatible.



Accessories --> Other --> Cables, Cords and Batteries

ACCSS0243: PowerBase Battery

Powerbase battery to run the Laser Scanner LS. To be mounted between the tripod and the Laser Scanner LS by the means of a 5/8 inch thread. Alternatively to be mounted hanging on the tripod. Chargeable only with the charger ACCSS0245.

ACCSS0244: PowerBase Cable

Connecting cable between PowerBase battery and Laser Scanner LS. Length approx. 50cm.

ACCSS0245: PowerBase Charger

Charger for the PowerBase battery ONLY. Not to be used to charge any other battery system.

ACCSS0246: PowerBase Kit

Super mobile battery kit to run the Laser Scanner LS. To be mounted between the tripod and the Laser Scanner LS by the means of a 5/8 inch thread. Alternatively to be mounted hanging on the tripod. Consists of battery and cable. Chargeable only with the charger ACCSS0245 (Not Included).

ACCSS0247: PowerBase Charger Kit - full package

Super mobile battery kit with charger to run the Laser Scanner LS. To be mounted between the tripod and the Laser Scanner LS by the means of a 5/8 inch thread. Alternatively to be mounted hanging on the tripod. Consists of battery, charger and cable.

ACCSS0264: PowerBase Charger Kit - full double package

Two Super mobile battery kits with 2 chargers to run the Laser Scanner LS. To be mounted between the tripod and the Laser Scanner LS by the means of a 5/8" thread.Alternatively to be mounted hanging on the tripod.Consists of 2 batteries, 2 chargers and 2 cables.

K139: Lemo Connector cable LS - 20m

Lemo connection cable for FARO Laser Scanner LS. Supplies power and communication to scanner. Length 20m. [K139]

Misc

11558: Carrying Handle for Laser Scanner

Heavy Duty fold-away carrying handle specifically designed for FARO Laser Scanner systems.Prerequisite: Scanner needs to have a main frame with bushings for the pins (built approx. since July 2007).

ACCSS0021: SAFETY GLASSES FOR SCANNER LS - std fit

SAFETY GLASSES FOR SCANNER LS - standard "sunglasses" style (use ACCSS0218 for eyeglasses fit).



Accessories --> Other --> Misc

ACCSS0205: Inclination Sensor for Laser Scanner LS (internal component)

Level Sensor for measuring inclinations between +/-15° for Laser Scanner LS.

ACCSS0218: SAFETY GLASSES FOR SCANNER LS - eyeglasses fit

SAFETY GLASSES FOR SCANNER LS - eyeglasses fit (use ACCSS0021 for sunglasses style fit).

ACCSS0230: WLAN USB Stick for Laser Scanner LS

WLAN USB Stick necessary to control the FARO Laser Scanner LS with a PDA or other wireless LAN appliances (IEEE 802.11b/g).

ACCSS0248: Helical Kit

Helical Kit to run the Laser Scanner LS in “Helical Mode”. Kit consists of synchronisation connector integrated into the PC module and external testing board to test the synchronization signals. Factory service required for upgrades of existing units.

ACCSS0259: Helical Upgrade Photon

Helical Upgrade to run the Photon Laser Scanner in “Helical Mode”. Consists of activation of the synchronisation interface of the Photon laser scanner, external testing board to test the synchronization signals as well as documentation.



Software --> Program

Software

Program

SOFT90001-F: PolyWorks/Modeler & Inspector™ + NURBS Surfacing Module (Float)

PolyWorks/Modeler & Inspector™ + NURBS Surfacing Module including IMAlign™, IMMerge™, IMEdit™, NURBS Surfacing Module, IMCompress™, IMInspect™, IGES and STEP (Float) Includes 1 year mandatory support/ maintenance contract . 1 mandatory dongle (hardware key - USB port). Optional FREE 5-day 'basic‟ training (STR90001) on PolyWorks/Modeler&Inspector package, at InnovMetric (Quebec City) for two trainees.

SOFT90001-N: PolyWorks/Modeler & Inspector™ + NURBS Surfacing Module (Node)

PolyWorks/Modeler & Inspector™ + NURBS Surfacing Module including IMAlign™, IMMerge™, IMEdit™, NURBS Surfacing Module, IMCompress™, IMInspect™, IGES and STEP (Node) Includes 1 year mandatory support/ maintenance contract . 1 mandatory dongle (hardware key - USB port). Optional FREE 5-day 'basic‟ training (STR90001) on PolyWorks/Modeler&Inspector package, at InnovMetric (Quebec City) for two trainees.

SOFT90002-F: PolyWorks/Modeler & Inspector™ (Float)

PolyWorks/Modeler & Inspector™including IMAlign™, IMMerge™, IMEdit™,IMCompress™, IMInspect™, IGES and STEP (Float). Includes 1 year mandatory support/ maintenance contract . 1 mandatory dongle (hardware key - USB port). Optional FREE 5-day 'basic‟ training (STR90001) on PolyWorks/Modeler&Inspector package, at InnovMetric (Quebec City) for two trainees.

SOFT90002-N: PolyWorks/Modeler & Inspector™ (Node)

PolyWorks/Modeler & Inspector™including IMAlign™, IMMerge™, IMEdit™,IMCompress™, IMInspect™, IGES and STEP (Node). Includes 1 year mandatory support/ maintenance contract . 1 mandatory dongle (hardware key - USB port). Optional FREE 5-day 'basic‟ training (STR90001) on PolyWorks/Modeler&Inspector package, at InnovMetric (Quebec City) for two trainees.

SOFT90003-F: PolyWorks/Modeler™ + NURBS Surfacing Module (Float)

PolyWorks/Modeler™ + NURBS Surfacing Module including IMAlign™, IMMerge™, IMEdit™, NURBS Surfacing Module, IMCompress™ (Float). Includes 1 year mandatory support/ maintenance contract . 1 mandatory dongle (hardware key - USB port). Optional FREE 3-day „basic‟ training (STR90002) on PolyWorks/Modeler package, at InnovMetric (Quebec City). „Classroom type‟ training at pre-determined dates. Up to TWO trainees.

SOFT90003-N: PolyWorks/Modeler™ + NURBS Surfacing Module (Node)

PolyWorks/Modeler™ + NURBS Surfacing Module including IMAlign™, IMMerge™, IMEdit™, NURBS Surfacing Module, IMCompress™ (Node). Includes 1 year mandatory support/ maintenance contract . 1 mandatory dongle (hardware key - USB port). Optional FREE 3-day „basic‟ training (STR90002) on PolyWorks/Modeler package, at InnovMetric (Quebec City). „Classroom type‟ training at pre-determined dates. Up to TWO trainees.

SOFT90004-F: PolyWorks/Modeler™ (Float)

PolyWorks/Modeler™ including IMAlign™, IMMerge™, IMEdit™, IMCompress™ (Float) Includes 1 year mandatory support/ maintenance contract . 1 mandatory dongle (hardware key - USB port). Optional FREE 3-day „basic‟ training (STR90002) on PolyWorks/Modeler package, at InnovMetric (Quebec City). „Classroom type‟ training at pre-determined dates. Up to TWO trainees.




SOFT90004-N: PolyWorks/Modeler™ (Node)

PolyWorks/Modeler™ including IMAlign™, IMMerge™, IMEdit™, IMCompress™ (Node) Includes 1 year mandatory support/ maintenance contract . 1 mandatory dongle (hardware key - USB port). Optional FREE 3-day „basic‟ training (STR90002) on PolyWorks/Modeler package, at InnovMetric (Quebec City). „Classroom type‟ training at pre-determined dates. Up to TWO trainees.

SOFT90005-F: PolyWorks/Advanced Manufacturing Module (Float)

Optional module for „PolyWorks/Modeler + NURBS Surfacing Module‟ licenses*Customer should already own or purchase a PWMN (SOFT90003) or PWMIN (SOFT90001) license. PWAM (SOFT90005) orders qualify for a 50% price reduction from „list‟, until September 30th, 2009.

SOFT90005-N: PolyWorks/Advanced Manufacturing Module (Node)

Optional module for „PolyWorks/Modeler + NURBS Surfacing Module‟ licenses*Customer should already own or purchase a PWMN (SOFT90003) or PWMIN (SOFT90001) license. PWAM (SOFT90005) orders qualify for a 50% price reduction from „list‟, until September 30th, 2009.

SOFT90006-F: PolyWorks/Inspector with IMAlign™ (Float)

PolyWorks/Inspector with IMAlign™ (Float) including IMAlign™, IMInspect™, IGES and STEP. Includes 1 year mandatory support/ maintenance contract . 1 mandatory dongle (hardware key - USB port). Optional FREE 3-day „basic‟ training (STR90002) on PolyWorks/Inspector package, at InnovMetric (Quebec City). „Classroom type‟ training at pre-determined dates. Up to TWO trainees.

SOFT90006-N: PolyWorks/Inspector with IMAlign™ (Node)

PolyWorks/Inspector with IMAlign™ (Node) including IMAlign™, IMInspect™, IGES and STEP. Includes 1 year mandatory support/ maintenance contract . 1 mandatory dongle (hardware key - USB port). Optional FREE 3-day „basic‟ training (STR90002) on PolyWorks/Inspector package, at InnovMetric (Quebec City). „Classroom type‟ training at pre-determined dates. Up to TWO trainees.

SOFT90007-F: PolyWorks/Inspector™ (Float)

PolyWorks/Inspector™ (Float) including IMInspect™, IGES and STEP. Includes 1 year mandatory support/ maintenance contract . 1 mandatory dongle (hardware key - USB port). Optional FREE 3-day „basic‟ training (STR90002) on PolyWorks/Inspector package, at InnovMetric (Quebec City). „Classroom type‟ training at pre-determined dates. Up to TWO trainees.

SOFT90007-N: PolyWorks/Inspector™ (Node)

PolyWorks/Inspector™ (Node) including IMInspect™, IGES and STEP. Includes 1 year mandatory support/ maintenance contract . 1 mandatory dongle (hardware key - USB port). Optional FREE 3-day „basic‟ training (STR90002) on PolyWorks/Inspector package, at InnovMetric (Quebec City). „Classroom type‟ training at pre-determined dates. Up to TWO trainees.

SOFT90008-F: PolyWorks/Inspector™ Airfoil Gauge Module (Float)

Optional module for PolyWorks/Inspector licenses. (Float). *Customer should already own or purchase a PolyWorks/Inspector license (PWIWA, PWINA, or PWMIN). (When ordering PWAF, please apply same basic discount as for ordering „CAD translators‟.)




SOFT90008-N: PolyWorks/Inspector™ Airfoil Gauge Module (Node)

Optional module for PolyWorks/Inspector licenses (Node). *Customer should already own or purchase a PolyWorks/Inspector license (PWIWA, PWINA, or PWMIN).(When ordering PWAF, please apply same basic discount as for ordering „CAD translators‟.)

SOFT90017-N: PolyWorks/Inspector Probing™ (Node)

PolyWorks/Inspector Probing™ (Node) including IMInspect™ Probing, IGES and STEP. Includes 1 year mandatory support/ maintenance contract . 1 mandatory dongle (hardware key - USB port). (Optional CAD translators are available on PWIP licenses.)

SOFT90018-N: PolyWorks/Inspector Probing™ “One year use” license (Node)

PolyWorks/Inspector Probing™ (Node) “One year use” license including IMInspect™ Probing, IGES and STEP (Temporary “one year use” license. Can be renewed yearly. Includes 1 year support/ maintenance contract . 1 mandatory dongle (hardware key - USB port). **Optional CAD translators are not available on PWIP-1 “one year use” licenses and "one year use" licenses do not qualify to software upgrades.)

SOFT90019-N: PolyWorks/Inspector Probing™ (Node) Facility Package

PolyWorks/Inspector Probing™ (Node) Package including IMInspect™ Probing, IGES and STEP. Includes 1 year support/ maintenance contract . 1 mandatory dongle (hardware key - USB port).INCLUDES 2-day training on PolyWorks/Inspector Probing Facility Package at InnovMetric (Quebec City). „Hands-on‟ training at pre-determined dates. Up to two trainees may register. Trainees must bear their own T&L expenses. Must both register to the same training and confirm directly with InnovMetric. Note : No more than four attendants (from two different organizations) in total for any such training. (Optional CAD translators are available on PWIP licenses.). ONLY AVAILABLE in US, Canada and Mexico.

SOFT90020-N: PolyWorks/Inspector Probing™ (Node) On-site Package

PolyWorks/Inspector Probing™ (Node) On-Site Package including IMInspect™ Probing, IGES and STEP. Includes 1 year support/ maintenance contract . 1 mandatory dongle (hardware key - USB port). INCLUDES 2-day training on PolyWorks/Inspector Probing package, ON-SITE. Trainer travel expenses included. Training at customer site for up to 6 people. (Optional CAD translators are available on PWIP licenses. ) **Only Available in US, Canada and Mexico**

SOFT90021-N: Upgrade from PolyWorks/Inspector Probing™ to PolyWorks/Inspector™ (Node) Facility - Within 1st year

Upgrade from PolyWorks/Inspector Probing™ to PolyWorks/Inspector™ (Node) - WITHIN first year of PWIP purchase including IMInspect™, IGES and STEP. Includes 1 year support/ maintenance contract . 1 mandatory dongle (hardware key - USB port). INCLUDES 3-day „basic‟ training on PolyWorks/Inspector package, at InnovMetric (Quebec City). „Classroom type‟ training at pre-determined dates. Up to TWO trainees may register for each license ordered. Trainees must bear their own T&L expenses. Must both register to the same Classroom training and confirm directly with InnovMetric. Must be scheduled within one year from license purchase. After one year, regular fees to apply. **Only Available in US, Canada and Mexico**




SOFT90022-N: Upgrade from PolyWorks/Inspector Probing™ to PolyWorks/Inspector™ (Node) - After 1st Yr of PWIP purchase.

Upgrade from PolyWorks/Inspector Probing™ to PolyWorks/Inspector™ - AFTER first year of PWIP purchase including IMInspect™, IGES and STEP (Node). Includes 1 year support/ maintenance contract . 1 mandatory dongle (hardware key - USB port). INCLUDES 3-day „basic‟ training on PolyWorks/Inspector package, at InnovMetric (Quebec City). „Classroom type‟ training at pre-determined dates. Up to TWO trainees may register for each license ordered. Trainees must bear their own T&L expenses. Must both register to the same Classroom training and confirm directly with InnovMetric. Must be scheduled within one year from license purchase. After one year, regular fees to apply. **Only Available in US, Canada and Mexico**

SOFT90023-N: Upgrade from PolyWorks/Inspector Probing™ to PolyWorks/Inspector with IMAlign™ (Node) - Within 1st Yr of PWIP purchase.

Upgrade from PolyWorks/Inspector Probing™ to PolyWorks/Inspector with IMAlign™ (Node) - WITHIN first year of PWIP purchase including IMAlign™, IMInspect™, IGES and STEP. Includes 1 year support/ maintenance contract. 1 mandatory dongle (hardware key - USB port). INCLUDES 3-day „basic‟ training on PolyWorks/Inspector package, at InnovMetric (Quebec City). „Classroom type‟ training at pre-determined dates. Up to TWO trainees may register for each license ordered. Trainees must bear their own T&L expenses. Must both register to the same Classroom training and confirm directly with InnovMetric. Must be scheduled within one year from license purchase. After one year, regular fees to apply. **Only Available in US, Canada and Mexico**

SOFT90024-N: Upgrade from PolyWorks/Inspector Probing™ to PolyWorks/Inspector with IMAlign™ (Node) - After 1st Yr of PWIP purchase

Upgrade from PolyWorks/Inspector Probing™ to PolyWorks/Inspector with IMAlign™ (Node) - AFTER first year of PWIP purchase including IMAlign™, IMInspect™, IGES and STEP. Includes 1 year support/ maintenance contract . 1 mandatory dongle (hardware key - USB port). INCLUDES 3-day „basic‟ training on PolyWorks/Inspector package, at InnovMetric (Quebec City). „Classroom type‟ training at pre-determined dates. Up to TWO trainees may register for each license ordered. Trainees must bear their own T&L expenses. Must both register to the same Classroom training and confirm directly with InnovMetric. Must be scheduled within one year from license purchase. After one year, regular fees to apply. **Only Available in US, Canada and Mexico**

SOFT90026-N: Upgrade from PolyWorks/Inspector Probing™ to PolyWorks/Modeler & Inspector™ + NURBS Surfacing Module (Node) - Within 1st Yr of PWIP purchase

Upgrade from PolyWorks/Inspector Probing™ to PolyWorks/Modeler & Inspector™ + NURBS Surfacing Module (Node) - WITHIN first year of PWIP purchase including IMAlign™, IMMerge™, IMEdit™, NURBS Surfacing Module, IMCompress™, IMInspect™, IGES and STEP. INCLUDES 5-day „basic‟ training on PolyWorks/Modeler&Inspector package, at InnovMetric (Quebec City). „Classroom type‟ training at pre-determined dates. Up to TWO trainees may register for each license ordered. Trainees must bear their own T&L expenses. Must both register to the same Classroom training and confirm directly with InnovMetric. Must be scheduled within one year from license purchase. After one year, regular fees to apply.

SOFT90027-N: Upgrade from PolyWorks/Inspector Probing™ to PolyWorks/Modeler & Inspector™ + NURBS Surfacing Module (Node) - After 1st Yr of PWIP purchase

Upgrade from PolyWorks/Inspector Probing™ to PolyWorks/Modeler & Inspector™ + NURBS Surfacing Module (Node) - After first year of PWIP purchase including IMAlign™, IMMerge™, IMEdit™, NURBS Surfacing Module, IMCompress™, IMInspect™, IGES and STEP. INCLUDES 5-day „basic‟ training on PolyWorks/Modeler&Inspector package, at InnovMetric (Quebec City). „Classroom type‟ training at pre-determined dates. Up to TWO trainees may register for each license ordered. Trainees must bear their own T&L expenses. Must both register to the same Classroom training and confirm directly with InnovMetric. Must be scheduled within one year from license purchase. After one year, regular fees to apply.

SOFT90028-F: PolyWorks/Surveyor™ (Float)

PolyWorks/Surveyor™ (Float) including IMAlign™ and IMSurvey™. Includes 1 year mandatory support/ maintenance contract . 1 mandatory dongle (hardware key - USB port).




SOFT90028-N: PolyWorks/Surveyor™ (Node)

PolyWorks/Surveyor™ (Node) including IMAlign™ and IMSurvey™. Includes 1 year mandatory support/ maintenance contract . 1 mandatory dongle (hardware key - USB port).

SOFT90029-F: PolyWorks/Surveyor & Modeler ™ (Float)

PolyWorks/Surveyor & Modeler ™ (Float) including IMAlign™, IMSurvey™, IMMerge™, IMEdit™ and IMCompress™. Includes 1 year mandatory support/ maintenance contract . 1 mandatory dongle (hardware key - USB port).

SOFT90029-N: PolyWorks/Surveyor & Modeler ™ (Node)

PolyWorks/Surveyor & Modeler ™ (Node) including IMAlign™, IMSurvey™, IMMerge™, IMEdit™ and IMCompress™. Includes 1 year mandatory support/ maintenance contract . 1 mandatory dongle (hardware key - USB port).

SOFT90030-F: IMTexture™ Optional Module (Float)

IMTexture™ Optional Module (Float) for color digitizers for PolyWorks/Modeler licenses. Includes 1 year mandatory support/ maintenance contract . (No dongle included)

SOFT90030-N: IMTexture™ Optional Module (Node)

IMTexture™ Optional Module (Node) for color digitizers for PolyWorks/Modeler licenses. Includes 1 year mandatory support/ maintenance contract . (No dongle included)

FARO

FARO Cloud

SOFTS0314-TR: FARO Cloud for Microstation - University License

FARO Cloud supports the visualisation, manipulation and analysis of millions of 3-D points in the well known Microstation environment. - University License.Compatible with Version 8.5 of MicroStation.

FARO Scene - Record - Scout

SOFTS0301: FARO Scout

FARO Scout software is specially designed for viewing of extensive 3-D scan points from high resolution 3-D laser scanners like the Laser Scanner LS. This tool allows the user to manipulate raw 3-D scan points and acquire with analysis functions initial point cloud data comprehension. Through data analysis and manipulation, scan points may be prepared for export into the user„s CAD system. Includes ability to filter scans as well, but cannot be used to register scans or for data collection.

SOFTS0301-TR: FARO Scout - University License

FARO Scout software is specially designed for viewing of extensive 3-D scan points from high resolution 3-D laser scanners like the Laser Scanner LS. This tool allows the user to manipulate raw 3-D scan points and acquire with analysis functions initial point cloud data comprehension. Through data analysis and manipulation, scan points may be prepared for export into the user„s CAD system. Includes ability to filter scans as well, but cannot be used to register scans or for data collection. - University License



Software --> Program --> FARO --> FARO Scene - Record - Scout

SOFTS0302: FARO Scene

FARO Scene software is specially designed for viewing, administration and working on, of extensive 3-D scan points from high resolution 3-D laser scanners like the Laser Scanner LS. This tool allows the user to manipulate raw 3-D scan points and acquire with analysis functions initial point cloud data comprehension. Through data analysis and manipulation, scan points may be prepared for export into the user„s CAD system. Complete workspace creation and manipulation tool. Contains all functionality of FARO Scout, and in addition the functions required for scan placement. Can also be used for scan acquisition.

SOFTS0302-TR: FARO Scene - University License

FARO Scene software is specially designed for viewing, administration and working on, of extensive 3-D scan points from high resolution 3-D laser scanners like the Laser Scanner LS. This tool allows the user to manipulate raw 3-D scan points and acquire with analysis functions initial point cloud data comprehension. Through data analysis and manipulation, scan points may be prepared for export into the user„s CAD system. Complete workspace creation and manipulation tool. Contains all functionality of FARO Scout, and in addition the functions required for scan placement. Can also be used for scan acquisition.- University License

SOFTS0310: FARO Scene single version UPGRADE

FARO Scene single version UPGRADE for existing licenses.

SOFTS0311: FARO Scout single version UPGRADE

FARO Scout single version UPGRADE for existing licenses.

SOFTS0341: FARO Scene, pack of 2

FARO Scene, pack of 2 licenses











Software --> Program --> Third Party --> FARO Scene

Third Party

FARO Scene

SOFTS0334: FARO Scene Extension Forensic

Extension of FARO Scene software with additional features for forensic applications.

SOFTS0334-UNI: FARO Scene Extension Forensic UNI

Extension of FARO Scene software with additional features for forensic applications. University license.

Geomagic

SOFT80001: Wrap with Capture - Node

Geomagic Wrap. Point and polygon processing software includes tools for cleaning up and merging scan data and for creating polygon meshes. Suitable for creating watertight models for rapid prototyping and digital manufacturing. Dongle is not included with software and is not required. If a dongle is requested, order part number SOFT80046 to include dongle.

SOFT80002: Wrap with Capture - Float

Geomagic Wrap. Point and polygon processing software includes tools for cleaning up and merging scan data and for creating polygon meshes. Suitable for create watertight models for rapid prototyping and digital manufacturing.

SOFT80003: Qualify with Capture - Node

Geomagic Qualify. Enables fast, easy-to-understand graphical comparisons between CAD models and as-built parts for first-article inspection, inline or shop-floor inspection, trend analysis and in-depth assessment. Dongle is not included with software and is not required. If a dongle is requested, order part number SOFT80046 to include dongle.

SOFT80004: Qualify with Capture - Float

Geomagic Qualify. Enables fast, easy-to-understand graphical comparisons between CAD models and as-built parts for first-article inspection, inline or shop-floor inspection, trend analysis and in-depth assessment.

SOFT80005: Studio Shape (Capture, Wrap, Shape) - Node

Geomagic Studio - Shape Edition. Designed for medical and scientific applications where users want to create exact 3D replicas of organic objects such as bones or historical artifacts. Dongle is not included with software and is not required. If a dongle is requested, order part number SOFT80046 to include dongle.

SOFT80006: Studio Shape (Capture, Wrap, Shape) - Float

Geomagic Studio - Shape Edition. Designed for medical and scientific applications where users want to create exact 3D replicas of organic objects such as bones or historical artifacts.



Software --> Program --> Third Party --> Geomagic

SOFT80007: Studio Shape (Capture, Wrap, Shape) with Qualify - Node

Geomagic Studio - Shape Edition with Qualify. Studio - Shape Edition is ideal for medical and scientific applications where users want to create exact 3D replicas of organic objects such as bones or historical artifacts. Geomagic Qualify enables fast, easy-to-understand graphical comparisons between CAD models and as-built parts for first-article inspection, inline or shop-floor inspection, trend analysis and in-depth assessment. Dongle is not included with software and is not required. If a dongle is requested, order part number SOFT80046 to include dongle.

SOFT80008: Studio Shape (Capture, Wrap, Shape) with Qualify - Float

Geomagic Studio - Shape Edition with Qualify. Studio - Shape Edition is ideal for medical and scientific applications where users want to create exact 3D replicas of organic objects such as bones or historical artifacts. Geomagic Qualify enables fast, easy-to-understand graphical comparisons between CAD models and as-built parts for first-article inspection, inline or shop-floor inspection, trend analysis and in-depth assessment.

SOFT80009: Studio Fashion (Capture, Wrap, Fashion) - Node

Geomagic Studio - Fashion Edition. Premier solution for mechanical design applications including new design and reverse engineering. Enables users to quickly extract design intent and recreate original surface aesthetics that can be further manipulated in CAD software. Dongle is not included with software and is not required. If a dongle is requested, order part number SOFT80046 to include dongle.

SOFT80010: Studio Fashion (Capture, Wrap, Fashion) - Float

Geomagic Studio - Fashion Edition. Premier solution for mechanical design applications including new design and reverse engineering. Enables users to quickly extract design intent and recreate original surface aesthetics that can be further manipulated in CAD software.

SOFT80011: Studio Fashion (Capture, Wrap, Fashion) with Qualify - Node

Geomagic Studio - Fashion Edition with Qualify. Premier Studio solution for mechanical design applications including new design and reverse engineering. Enables users to quickly extract design intent and recreate original surface aesthetics that can be further manipulated in CAD software. Geomagic Qualify enables fast, easy-to-understand graphical comparisons between CAD models and as-built parts for first-article inspection, inline or shop-floor inspection, trend analysis and in-depth assessment. Dongle is not included with software and is not required. If a dongle is requested, order part number SOFT80046 to include dongle.

SOFT80012: Studio Fashion (Capture, Wrap, Fashion) with Qualify - Float

Geomagic Studio - Fashion Edition with Qualify. Premier Studio solution for mechanical design applications including new design and reverse engineering. Enables users to quickly extract design intent and recreate original surface aesthetics that can be further manipulated in CAD software. Geomagic Qualify enables fast, easy-to-understand graphical comparisons between CAD models and as-built parts for first-article inspection, inline or shop-floor inspection, trend analysis and in-depth assessment.

SOFT80013: Studio Complete (Capture, Wrap, Fashion, Shape) - Node

Geomagic Studio - Complete Edition. Ideal for mechanical designers who want to extract design intent from existing objects for use in CAD and also want to perform FEA and CFD analysis on as-built parts. Dongle is not included with software and is not required. If a dongle is requested, order part number SOFT80046 to include dongle.




SOFT80014: Studio Complete (Capture, Wrap, Fashion, Shape) - Float

Geomagic Studio - Complete Edition. Ideal for mechanical designers who want to extract design intent from existing objects for use in CAD and also want to perform FEA and CFD analysis on as-built parts.

SOFT80015: Studio Complete (Capture, Wrap, Fashion, Shape) with Qualify - Node

Geomagic Studio - Complete Edition with Qualify. Studio - Complete edition is ideal for mechanical designers who want to extract design intent from existing objects for use in CAD and also want to perform FEA and CFD analysis on as-built parts. Geomagic Qualify enables fast, easy-to-understand graphical comparisons between CAD models and as-built parts for first-article inspection, inline or shop-floor inspection, trend analysis and in-depth assessment. Dongle is not included with software and is not required. If a dongle is requested, order part number SOFT80046 to include dongle.

SOFT80016: Studio Complete (Capture, Wrap, Fashion, Shape) with Qualify - Float

Geomagic Studio Complete (Capture, Wrap, Fashion, Shape) with Qualify - Float.

SOFT80017: Qualify added to Studio Fashion Edition (Capture, Wrap, Fashion)

Qualify Add-On to Studio Fashion (Capture, Wrap, Fashion). Requires reference to existing entitlement numbers. Dongle is not included with software and is not required. If a dongle is requested, order part number SOFT80046 to include dongle.

SOFT80018: Qualify added to Studio Shape Edition (Capture, Wrap, Shape)

Qualify Add-On to Studio Fashion (Capture, Wrap, Shape). Requires reference to existing entitlement numbers. Dongle is not included with software and is not required. If a dongle is requested, order part number SOFT80046 to include dongle.

SOFT80019: Qualify added to Studio Complete Edition

Qualify Add-On to Studio Complete (Capture, Wrap, Fashion, Shape). Requires reference to existing entitlement numbers. Dongle is not included with software and is not required. If a dongle is requested, order part number SOFT80046 to include dongle.

SOFT80020: Studio Fashion Edition (Capture, Wrap, Fashion) added to Qualify

Studio Fashion (Capture, Wrap, Fashion) add-On to Qualify Requires reference to existing entitlement numbers. Dongle is not included with software and is not required. If a dongle is requested, order part number SOFT80046 to include dongle.

SOFT80021: Studio Shape Edition added to Qualify

Studio Shape (Capture, Wrap, Shape) add-On to Qualify. Requires reference to existing entitlement numbers. Dongle is not included with software and is not required. If a dongle is requested, order part number SOFT80046 to include dongle.

SOFT80022: Fashion added to Wrap Studio or Shape Studio (includes Capture)

Fashion Add-On to Wrap Studio or Shape Studio. Requires reference to existing entitlement numbers. Dongle is not included with software and is not required. If a dongle is requested, order part number SOFT80046 to include dongle.




SOFT80024: Geomagic Blade - Node

Geomagic Blade. Add-on to Geomagic Qualify for turbomachinery applications. Provides advanced digital techniques for aligning edge-to-pin contact, automatic dimensioning of blade-specific characteristics and automated twist analysis. Dongle is not included with software and is not required. If a dongle is requested, order part number SOFT80046 to include dongle.

SOFT80025: Geomagic Blade - Float

Geomagic Blade. Add-on to Geomagic Qualify for turbomachinery applications. Provides advanced digital techniques for aligning edge-to-pin contact, automatic dimensioning of blade-specific characteristics and automated twist analysis.

SOFT80034: Capture added to existing Wrap

Adding Capture to existing Wrap.

SOFT80035: Fashion Added to Shape Studio with Qualify Bundle

Fashion Added to Shape Studio with Qualify Bundle.

SOFT80036: Shape added to Studio Fashion

Shape added to Studio Fashion.

SOFT80037: Shape Added to Studio Fashion with Qualify

Shape Added to Studio Fashion with Qualify

SOFT80038: Educational RE-Node (Capture, Wrap, Shape, Fashion) (Dongle not provided for EDU)

Educational RE-Node (Capture, Wrap, Shape, Fashion) (Dongle not provided for EDU) (Educational Maintenance is a one-time annual fee for all seats. First Year Maintenance is REQUIRED with Education (SMA80025))

SOFT80039: Educational RE- Float (Capture, Wrap, Shape, Fashion) (Dongle not provided for EDU)

Educational RE- Float (Capture, Wrap, Shape, Fashion) (Dongle not provided for EDU) (Educational Maintenance is a one-time annual fee for all seats. First Year Maintenance is REQUIRED with Education (SMA80025))

SOFT80040: Educational Inspect-Node (Capture, Qualify & Blade) (Dongle not provided for EDU)

Educational Inspect-Node (Capture, Qualify & Blade) (Dongle not provided for EDU) (Educational Maintenance is a one-time annual fee for all seats. First Year Maintenance is REQUIRED with Education (SMA80025))




SOFT80041: Educational Inspect-Float (Capture, Qualify & Blade) (Dongle not provided for EDU)

Educational Inspect-Float (Capture, Qualify & Blade) (Dongle not provided for EDU) (Educational Maintenance is a one-time annual fee for all seats. First Year Maintenance is REQUIRED with Education (SMA80025))

SOFT80042: Educational Complete-Node (Capture, Wrap, Shape, Qualify & Fashion) (Dongle not provided for EDU)

Educational Complete-Node (Capture, Wrap, Shape, Qualify & Fashion) (Dongle not provided for EDU) (Educational Maintenance is a one-time annual fee for all seats. First Year Maintenance is REQUIRED with Education (SMA80025))

SOFT80043: Educational Complete-Float (Capture, Wrap, Shape, Qualify & Fashion) (Dongle not provided for EDU)

Educational Complete-Float (Capture, Wrap, Shape, Qualify & Fashion) (Dongle not provided for EDU) (Educational Maintenance is a one-time annual fee for all seats. First Year Maintenance is REQUIRED with Education (SMA80025))

SOFT80044: Additional Educational Seat

Additional Educational Seat (Maximum 20 Seats total) Educational Maintenance is a one-time annual fee for all seats. Maintenance covered under 1st seat.

SOFT80046: Geomagic USB Dongle/Portlock

Geomagic USB Dongle/Portlock

SOFT80049: Fashion - Node

Fashion - Node

SOFT80050: Fashion - Float

Fashion - Float

SOFT80051: Shape - Node

Shape - Node

SOFT80052: Shape - Float

Shape - Float

PoinTools

SOFTS0325: Pointools View Pro

Pointools View Pro is a lightweight, high-performance point cloud and model viewing application that is ideal for data visualisation, management, presentation and distribution. It is the ideal system for producing high quality point cloud animation and stereo visualization.



Software --> Program --> Third Party --> PoinTools

SOFTS0326: Upgrade from PoinTools View to View Pro

Upgrade from Pointools View to Pointools View Pro

SOFTS0327: PoinTools 4 Rhino

Pointools for Rhino enables you to use Rhinoceros' powerful drawing and modelling toolset within a point cloud context.- Visualising your Rhino model in a point cloud context- Modelling from point clouds- 2d drawing from point clouds

SOFTS0350: Pointools Model 4 ACAD

Pointools for AutoCAD enables you to use AutoCAD's powerful drawing and modelling toolset together with the powerful point cloud handling of Pointool.

SOFTS0351: Pointools Edit

Pointools Edit enables you to modify your point clouds.- Changing colors- deleting of single points or whole areas- splitting the point cloud into different layers

SOFTS0352: Upgrade from PoinTools View Pro to PoinTools Edit

Upgrade from Pointools View Pro to Pointools Edit.

INOVx

SOFTS0328: RealityLINx Exchange

Software RealityLINx EXCHANGE from INOVx.Software for displaying laser scan data in various CAD programmes.<br>ATTENTION: This item needs to be qouted together with a 1st year maintenance contract (item # IWS-313)

SOFTS0329: RealityLINx Model

Software RealityLINx MODEL from INOVx.Software for modeling piping networks, structural steel, geometrical primitives etc. from laser scan data. <br>ATTENTION: This item needs to be qouted together with a 1st year maintenance contract (item # IWS-314)

FARO Cloud

SOFTS0314: Faro Cloud for Microstation

FARO Cloud supports the visualisation, manipulation and analysis of millions of 3-D points in the well known Microstation environment.Compatible with Version 8.5 of MicroStation.



Software --> Program --> Third Party --> FARO Cloud

SOFTS0320: FARO Cloud PRO ACAD, Crossgrade

FARO Cloud PRO ACAD, Crossgrade to change from standard to PRO version.

SOFTS0321: FARO Cloud ACAD, Hardlock

FARO Cloud ACAD, Hardlock. To change from softlock to hardlock for single user license.NO software included in this item.

SOFTS0321-TR: NOT FOR RESALE - FARO Cloud for AutoCad - USB Hardlock Dongle only

NOT FOR RESALE! - FARO Cloud for AutoCad - USB Hardlock Dongle only. To change from 1 single user softlock to physical hardlock. Gives the user the ability to activate point clouds for Free Edition of FARO Cloud for AutoCAD. Activations sold separately.

SOFTS0322-10: FARO Cloud for AutoCad -Point Cloud Activations (10)

FARO Cloud for AutoCad - Point Cloud Activations. Quantity of (10) activations for purpose of unlocking point clouds for Free Edition of FARO Cloud. Hardlock license required.





SOFTS0323: FARO Cloud for AutoCad - Update from FARO Cloud version 3.1 to current version

FARO Cloud for AutoCADUpdate from version 3.1 to current release version.

GEXCEL Srl.

SOFT80103: Reconstructor FULL

JRC 3D Reconstructor full version.Consisting of the modules:- Core- Lock- Surface- PhotoSoftware includes 1st year of maintenance.



Software --> Program --> Third Party --> GEXCEL Srl.

SOFT80103-SRV: Reconstructor FULL Server

JRC 3D Reconstructor full version.Server license for 6 concurrent users.Consisting of the modules:- Core- Lock- Surface- PhotoSoftware includes 1st year of maintenance.

SOFT80103-SRV-ADD: Reconstructor FULL Server - Addtn

JRC 3D Reconstructor full version.Addtional seat for the server license.Consisting of the modules:- Core- Lock- Surface- PhotoSoftware includes 1st year of maintenance.

SOFT80103-UNI: Reconstructor FULL, UNI

JRC 3D Reconstructor full version.- University license - Consisting of the modules:- Core- Lock- Surface- PhotoSoftware includes 1st year of maintenance.

SOFT80104: Reconstructor CORE module

JRC 3D Reconstructor module CORE.Fundamental module of the Reconstructor software suite.Main features:- Import of FARO scan data- Import of 3D models- Models and point viewer- LOD visualization system- Pre-processing and filtering- Point cloud edit- Virtual scan- "Solid Image" creation- Surveying tool- AutoCAD connection (prerequisite: FARO Cloud for AutoCAD)- Orthophoto generation- Export of 3D und 2D data- Video creationSoftware includes 1st year of maintenance.




SOFT80104-UNI: Reconstructor CORE module UNI

JRC 3D Reconstructor module CORE.- University license - Fundamental module of the Reconstructor software suite.Main features:- Import of FARO scan data- Import of 3D models- Models and point viewer- LOD visualization system- Pre-processing and filtering- Point cloud edit- Virtual scan- "Solid Image" creation- Surveying tool- AutoCAD connection (prerequisite: FARO Cloud for AutoCAD)- Orthophoto generation- Export of 3D und 2D data- Video creationSoftware includes 1st year of maintenance.

SOFT80105: Reconstructor LOCK module

JRC 3D Reconstructor module LOCK.ATTENTION: requires the CORE moduleMain features:- Registration with targets and geo-referencing- fast interactive pre-registration without targets- automatic registration refinementSoftware includes 1st year of maintenance.

SOFT80105-UNI: Reconstructor LOCK module UNI

JRC 3D Reconstructor module LOCK.- University license - ATTENTION: requires the CORE moduleMain features:- Registration with targets and geo-referencing- fast interactive pre-registration without targets- automatic registration refinementSoftware includes 1st year of maintenance.

SOFT80106: Reconstructor SURFACE module

JRC 3D Reconstructor module SURFACE.ATTENTION: requires the CORE moduleMain features:- Meshing / data reduction- Powerful integration between overlapping points and meshes- Inspection tool for change detectionSoftware includes 1st year of maintenance.




SOFT80106-UNI: Reconstructor SURFACE mod. UNI

JRC 3D Reconstructor module SURFACE.- University license -

ATTENTION: requires the CORE module

Main features:- Meshing / data reduction- Powerful integration between overlapping points and meshes- Inspection tool for change detectionSoftware includes 1st year of maintenance.

SOFT80107: Reconstructor PHOTO module

JRC 3D Reconstructor module PHOTO.ATTENTION: requires the CORE moduleMain features:- Import of 2D Images- Camera calibration- Texture mapping tool- Virtual scan using calibrated imagesSoftware includes 1st year of maintenance.

SOFT80107-UNI: Reconstructor PHOTO module UNI

JRC 3D Reconstructor module PHOTO.- University license - ATTENTION: requires the CORE moduleMain features:- Import of 2D Images- Camera calibration- Texture mapping tool- Virtual scan using calibrated imagesSoftware includes 1st year of maintenance.

SOFT80108: Reconstructor 3DManager

JRC Reconstructor 3DManager. Main features:- Import of 3D and 2D data- Export of 3D and 2D data- Data view- Data drawing, editing and information extraction- Polyline import functionSoftware includes 1st year of maintenance.

SOFT80108-UNI: Reconstructor 3DManager, UNI

JRC Reconstructor 3DManager.- University license - Main features:- Import of 3D and 2D data- Export of 3D and 2D data- Data view- Data drawing, editing and information extraction- Polyline import functionSoftware includes 1st year of maintenance.




SOFT80109: Reconstructor 3DGeoMec

JRC Reconstructor 3DGeoMec. Visualization and investigation of 3-dimensional scenes designed for geomechanical applications.Software includes 1st year of maintenance.

SOFT80109-UNI: Reconstructor 3DGeoMec UNI

JRC Reconstructor 3DGeoMec. - University license - Visualization and investigation of 3-dimensional scenes designed for geomechanical applications.Software includes 1st year of maintenance.

SOFT80110-UNI: Reconstructor FULL Classroom UNI

JRC 3D Reconstructor full version.- University license - Server license for 6 concurrent users.Consisting of the modules:- Core- Lock- Surface- PhotoSoftware includes 1st year of maintenance.

SOFT80110-UNI-Ad: Reconstructor Classroom UNI addtn.

JRC 3D Reconstructor full version.- University license - Addtional seat for the classroom server license.Consisting of the modules:- Core- Lock- Surface- PhotoSoftware includes 1st year of maintenance.

SOFT80115: Reconstructor CONTROL module

JRC 3D Reconstructor module CONTROL.


Main features:- Controls FARO Photon laser scanners- Controls various cameras (i.e. Nikon, Canon)- Use of lenses with various focal lengthesSoftware includes 1st year of maintenance.




SOFT80115-UNI: Reconstructor CONTROL module UNI

JRC 3D Reconstructor module CONTROL University Edition


Main features:- Controls FARO Photon laser scanners- Controls various cameras (i.e. Nikon, Canon)- Use of lenses with various focal lengthesSoftware includes 1st year of maintenance.

Other

10631-001: FARO Process, Power & Piping Package with INOVx 3-D PlantLINx®

FARO Process, Power & Piping Package for LS includes INOVx 3-D PlantLINx® software. The combination of FARO‟s LS high quality data capture and INOVx 3-D PlantLINx® provides a powerful tool for capturing as-built point cloud data and preparing 3-D CAD models of existing plant configurations allowing full utilization of INOVx„s Asset Documentation Services solution.

10631-003: FARO Process, Power & Piping Package(+) with INOVx 3-D PlantLINx®

FARO Process, Power & Piping Package(+) for LS includes INOVx 3-D PlantLINx® software. The combination of FARO‟s LS high quality data capture and INOVx 3-D PlantLINx® provides a powerful tool for capturing as-built point cloud data and preparing 3-D CAD models of existing plant configurations allowing full utilization of INOVx„s Asset Documentation Services solution. Includes 1 seat of FARO Scene (SOFTS0302) software.

10664-001: FARO Tunnel & Mining Package including Real Reality Tunnel Software

FARO Tunnel & Mining Package includes the ATS Real Reality Tunnel Software – powered by SBG Geo - giving users a powerful tool to control tunnels of all shapes with unlimited opportunities. Deviations can be visualized in 3-D, in cross sections and in contour lines. Volume calculation of a theoretical tunnel can use an optional offset and can be limited laterally and vertically. The resulting volume report and the drawing functions create a detailed report and enable full control of the tunnel. For a quick check of crucial parts, users can directly display a measured tunnel and compare it with a theoretical tunnel by displaying sections, offsets, and distances to the theoretical tunnel.

10664-002: FARO Tunnel & Mining Package(+) including Real Reality Tunnel Software

FARO Tunnel & Mining Package(+) includes the ATS Real Reality Tunnel Software – powered by SBG Geo - giving users a powerful tool to control tunnels of all shapes with unlimited opportunities. Deviations can be visualized in 3-D, in cross sections and in contour lines. Volume calculation of a theoretical tunnel can use an optional offset and can be limited laterally and vertically. The resulting volume report and the drawing functions create a detailed report and enable full control of the tunnel. For a quick check of crucial parts, users can directly display a measured tunnel and compare it with a theoretical tunnel by displaying sections, offsets, and distances to the theoretical tunnel. Includes 1 seat of FARO Scene (SOFTS0302) software.

Laser Scanner

SOFTS0335: FARO Cloud ACAD with Hardlock

Interface for AutoCAD.Displays point clouds within the AutoCAD drawing. Allows to snap on the scan points to place AutoCAD objects on theif as-built position.Detail list of features and supported AutoCAD versions: see tech sheet.Single user licenseHarlock/Dongle



Software --> Program --> Third Party --> Laser Scanner

SOFTS0336: FARO Cloud PRO ACAD with Hardlock

Interface for AutoCAD, Pro-VersionDisplays point clouds within the AutoCAD drawing. Allows to snap on the scan points to place AutoCAD objects on theif as-built position.Detail list of features and supported AutoCAD versions: see tech sheet.Single user licenseHardlock/Dongle

SOFTS0337: FARO Cloud ACAD, University

Interface for AutoCADUniversity licenseNetwork license for 10 usersHarlock/DongleIncluding 5 year maintenance

SOFTS0338: FARO Cloud PRO ACAD, University

Interface for AutoCAD, Pro-VersionUniversity licenseNetwork license for 10 usersHarlock/DongleIncluding 5 year maintenance

SOFTS0339: FARO Cloud for AutoCad - Update from FARO Cloud version 3.2 to current version

FARO Cloud for AutoCADUpdate from version 3.2 to current release version.

SOFTS0340: FARO Cloud PRO for AutoCad - Update from FARO Cloud PRO version 3.2 to current version

FARO Cloud PRO for AutoCADUpdate from version 3.2 to current release version.

Translator

SOFT90009-F: CATIA V4 & V5 Translators (Float)

CATIA V4 & V5 Translators (Float). PolyWorks/Inspector Translators* optional modules for PolyWorks/Inspector licenses. Includes 1 year mandatory support/ maintenance contract . *These translators can only be used with the IMInspect module so customer should already own or purchase the IMInspect module.

SOFT90009-N: CATIA V4 & V5 Translators (Node)

CATIA V4 & V5 Translators (Node). PolyWorks/Inspector Translators* optional modules for PolyWorks/Inspector licenses. Includes 1 year mandatory support/ maintenance contract . *These translators can only be used with the IMInspect module so customer should already own or purchase the IMInspect module.



Software --> Translator

SOFT90010-F: CATIA V5 Translator (Float)

CATIA V5 Translator (Float). PolyWorks/Inspector Translators* optional modules for PolyWorks/Inspector licenses. Includes 1 year mandatory support/ maintenance contract . *These translators can only be used with the IMInspect module so customer should already own or purchase the IMInspect module.

SOFT90010-N: CATIA V5 Translator (Node)

CATIA V5 Translator (Node). PolyWorks/Inspector Translators* optional modules for PolyWorks/Inspector licenses. Includes 1 year mandatory support/ maintenance contract . *These translators can only be used with the IMInspect module so customer should already own or purchase the IMInspect module.

SOFT90011-F: CATIA V4 Translator (Float)

CATIA V4 Translator (Float). PolyWorks/Inspector Translators* optional modules for PolyWorks/Inspector licenses. Includes 1 year mandatory support/ maintenance contract . *These translators can only be used with the IMInspect module so customer should already own or purchase the IMInspect module.

SOFT90011-N: CATIA V4 Translator (Node)

CATIA V4 Translator (Node). PolyWorks/Inspector Translators* optional modules for PolyWorks/Inspector licenses. Includes 1 year mandatory support/ maintenance contract . *These translators can only be used with the IMInspect module so customer should already own or purchase the IMInspect module.

SOFT90012-F: VDA Translator (Float)

VDA Translator (Float). PolyWorks/Inspector Translators* Optional modules for PolyWorks/Inspector licenses. Includes 1 year mandatory support/ maintenance contract . *These translators can only be used with the IMInspect module so customer should already own or purchase the IMInspect module.

SOFT90012-N: VDA Translator (Node)

VDA Translator (Node). PolyWorks/Inspector Translators* Optional modules for PolyWorks/Inspector licenses. Includes 1 year mandatory support/ maintenance contract . *These translators can only be used with the IMInspect module so customer should already own or purchase the IMInspect module.

SOFT90013-F: Pro/E Translator (Float)

Pro/E Translator (Float). PolyWorks/Inspector Translators* optional modules for PolyWorks/Inspector licenses *These translators can only be used with the IMInspect module so customer should already own or purchase the IMInspect module.

SOFT90013-N: Pro/E Translator (Node)

Pro/E Translator (Node). PolyWorks/Inspector Translators* optional modules for PolyWorks/Inspector licenses *These translators can only be used with the IMInspect module so customer should already own or purchase the IMInspect module.

SOFT90014-F: UG Translator (Float)

UG Translator (Float). PolyWorks/Inspector Translators* optional modules for PolyWorks/Inspector licenses. Includes 1 year mandatory support/ maintenance contract . *These translators can only be used with the IMInspect module so customer should already own or purchase the IMInspect module.



Software --> Translator

SOFT90014-N: UG Translator (Node)

UG Translator (Node). PolyWorks/Inspector Translators* optional modules for PolyWorks/Inspector licenses. Includes 1 year mandatory support/ maintenance contract . *These translators can only be used with the IMInspect module so customer should already own or purchase the IMInspect module.

SOFT90015-F: Inventor Translator (Float)

Inventor Translator (Float). PolyWorks/Inspector Translators* optional modules for PolyWorks/Inspector licenses *These translators can only be used with the IMInspect module so customer should already own or purchase the IMInspect module.

SOFT90015-N: Inventor Translator (Node)

Inventor Translator (Node). PolyWorks/Inspector Translators* optional modules for PolyWorks/Inspector licenses *These translators can only be used with the IMInspect module so customer should already own or purchase the IMInspect module.

SOFT90016-F: SolidWorks Translator (Float)

SolidWorks Translator (Float). PolyWorks/Inspector Translators* optional modules for PolyWorks/Inspector licenses. Includes 1 year mandatory support/ maintenance contract . *These translators can only be used with the IMInspect module so customer should already own or purchase the IMInspect module.

SOFT90016-N: SolidWorks Translator (Node)

SolidWorks Translator (Node). PolyWorks/Inspector Translators* optional modules for PolyWorks/Inspector licenses. Includes 1 year mandatory support/ maintenance contract . *These translators can only be used with the IMInspect module so customer should already own or purchase the IMInspect module.

Third Party

Geomagic

SOFT80026: Catia V Importer - Node

Importer CATIA V5 (Node). Includes 1st year maintenance.

SOFT80027: Catia V Importer - Float

Importer CATIA V5 (Float). Includes 1st year maintenance.

SOFT80028: Catia IV Importer - Node

Importer CATIA V4 (Node). Includes 1st year maintenance.

SOFT80029: Catia IV Importer - Float

Importer CATIA V4 (Float). Includes 1st year maintenance.



Software --> Translator --> Third Party --> Geomagic

SOFT80030: UniGraphics Importer - Node

Importer Unigraphics (Node). Includes 1st year maintenance.

SOFT80031: UniGraphics Importer - Float

Importer Unigraphics (Float). Includes 1st year maintenance.

SOFT80032: SolidWorks Importer - Node

Importer Solidworks (Node). Includes 1st year maintenance.

SOFT80033: SolidWorks Importer - Float

Importer Solidworks (Float). Includes 1st year maintenance.

Maintenance

SMA90001: PolyWorks/Modeler & Inspector™ + NURBS Support Contract Renewal (Node or Float)

PolyWorks/Modeler & Inspector™ + NURBS Surfacing Module. Support Contract Renewal for the renewal of annual support/maintenance contracts for each subsequent year (after the first year). (Node or Float)

SMA90002: PolyWorks/Modeler & Inspector™Support Contract Renewal (Node or Float)

PolyWorks/Modeler & Inspector™ Support Contract Renewal for the renewal of annual support/maintenance contracts for each subsequent year (after the first year). (Node or Float)

SMA90003: PolyWorks/Modeler™ + NURBS Surfacing Module Support Contract Renewal (Node or Float)

PolyWorks/Modeler™ + NURBS Surfacing Module Support Contract Renewal for the renewal of annual support/maintenance contracts for each subsequent year (after the first year). (Node or Float)

SMA90004: PolyWorks/Modeler™ Support Contract Renewal (Node or Float)

PolyWorks/Modeler™ Support Contract Renewal for the renewal of annual support/maintenance contracts for each subsequent year (after the first year). (Node or Float)

SMA90005: PolyWorks/Advanced Manufacturing Module Support Contract Renewal (Node or Float)

PolyWorks/Advanced Manufacturing Module Support Contract Renewal for the renewal of annual support/maintenance contracts for each subsequent year (after the first year). (Node or Float)



Software --> Maintenance

SMA90006: PolyWorks/Inspector with IMAlign™ Support Contract Renewal Node-Locked

PolyWorks/Inspector with IMAlign™ Support Contract Renewal for the renewal of annual support/maintenance contracts for each subsequent year (after the first year). (Node or Float)

SMA90007: PolyWorks/Inspector™ Support Contract Renewal (Node or Float)

PolyWorks/Inspector™ Support Contract Renewal for the renewal of annual support/maintenance contracts for each subsequent year (after the first year). (Node or Float)

SMA90008: PolyWorks/Inspector™ Airfoil Gauge Module Support Contract Renewal (Node or Float)

PolyWorks/Inspector™ Airfoil Gauge Module Support Contract Renewal for the renewal of annual support/maintenance contracts for each subsequent year (after the first year). (Node or Float)

SMA90009: CATIA V4 & V5 Translators Support Contract Renewal (Node or Float)

CATIA V4 & V5 Translators Support Contract Renewal for the renewal of annual support/maintenance contracts for each subsequent year (after the first year). (Node or Float)

SMA90010: CATIA V5 Translator Support Contract Renewal (Node or Float)

CATIA V5 Translator Support Contract Renewal for the renewal of annual support/maintenance contracts for each subsequent year (after the first year). (Node or Float)

SMA90011: CATIA V4 Translator Support Contract Renewal (Node or Float)

CATIA V4 Translator Support Contract Renewal for the renewal of annual support/maintenance contracts for each subsequent year (after the first year). (Node or Float)

SMA90012: VDA Translator Support Contract Renewal (Node or Float)

VDA Translator Support Contract Renewal for the renewal of annual support/maintenance contracts for each subsequent year (after the first year). (Node or Float)

SMA90013: Pro/E Translator Support Contract Renewal (Node or Float)

Pro/E Translator Support Contract Renewal for the renewal of annual support/maintenance contracts for each subsequent year (after the first year). (Node or Float)

SMA90014: UG Translator Support Contract Renewal (Node or Float)

UG Translator Support Contract Renewal for the renewal of annual support/maintenance contracts for each subsequent year (after the first year). (Node or Float)



Software --> Translator Maintenance

SMA90015: Inventor Translator Support Contract Renewal (Node or Float)

Inventor Translator Support Contract Renewal for the renewal of annual support/maintenance contracts for each subsequent year (after the first year). (Node or Float)

SMA90016: SolidWorks Translator Support Contract Renewal (Node or Float)

SolidWorks Translator Support Contract Renewal for the renewal of annual support/maintenance contracts for each subsequent year (after the first year). (Node or Float)

SMA90017: PolyWorks/Inspector Probing™ Support Contract Renewal (Node or Float)

PolyWorks/Inspector Probing™ Support Contract Renewal for the renewal of annual support/maintenance contracts for each subsequent year (after the first year). (Node)

SMA90019: PolyWorks/Inspector Probing™ FacilitySupport Contract Renewal (Node)

PolyWorks/Inspector Probing™ Support Contract Renewal for the renewal of annual support/maintenance contracts for each subsequent year (after the first year). (Node )

SMA90028: PolyWorks/Surveyor™Support Contract Renewal (Node or Float)

PolyWorks/Surveyor™ Support Contract Renewal for the renewal of annual support/maintenance contracts for each subsequent year (after the first year). (Node or Float)

SMA90029: PolyWorks/Surveyor & Modeler ™Support Contract Renewal (Node or Float)

PolyWorks/Surveyor & Modeler ™ Support Contract Renewal for the renewal of annual support/maintenance contracts for each subsequent year (after the first year). (Node or Float)

SMA90030: IMTexture™ Optional ModuleSupport Contract Renewal (Node or Float)

IMTexture™ Optional Module Support Contract Renewal for the renewal of annual support/maintenance contracts for each subsequent year (after the first year). (Node or Float)

Third Party

Geomagic

SMA80001: Maintenance 1 Year - Wrap with Capture - Node or Float

Maintenance - Geomagic Wrap with Capture - Node or Float

SMA80002: Maintenance 1 Year - Qualify with Capture - Node or Float

Maintenance - Geomagic Qualify with Capture - Node or Float

SMA80003: Maintenance 1 Year - Studio Shape - Node or Float

Maintenance -Geomagic Studio Shape - Node or Float



Software --> Program Maintenance --> Third Party --> Geomagic

SMA80004: Maintenance 1 Year - Studio Shape with Qualify - Node or Float

Maintenance - Geomagic Studio Shape with Qualify - Node or Float

SMA80005: Maintenance 1 Year - Studio Fashion - Node or Float

Maintenance - Geomagic Studio Fashion - Node or Float

SMA80006: Maintenance 1 Year - Studio Fashion with Qualify - Node or Float

Maintenance - Geomagic Studio Fashion - with Qualify - Node or Float

SMA80007: Maintenance 1 Year - Studio Complete - Node or Float

Maintenance - Geomagic Studio Complete - Node or Float

SMA80008: Maintenance 1 Year - Studio Complete with Qualify - Node or Float

Maintenance - Geomagic Studio Complete with Qualify - Node or Float

SMA80009: Maintenance 1 Year - Qualify added to Studio Fashion or Studio Shape Edition

Maintenance - Qualify added to Studio Fashion or Studio Shape Edition

SMA80010: Maintenance 1 Year - Qualify added to Studio Complete Edition

Maintenance - Qualify added to Studio Complete Edition

SMA80011: Maintenance 1 Year - Studio Fashion or Studio Shape Edition added to Qualify

Maintenance - Studio Fashion or Studio Shape Edition added to Qualify

SMA80012: Maintenance 1 Year - Fashion added to Wrap Studio or Shape Studio

Maintenance - Fashion added to Wrap Studio or Shape Studio

SMA80014: Maintenance 1 Year - Blade - Node or Float

Maintenance - Geomagic Blade - Node or Float

SMA80015: Maintenance 1 Year - Catia V Importer - Node

Maintenance - Catia V Importer - Node or Float



Software --> Translator Maintenance --> Third Party --> Geomagic

SMA80016: Maintenance 1 Year - Catia V Importer - Float

Maintenance - Catia V Importer - Float

SMA80017: Maintenance 1 Year - Catia IV Importer - Node

Maintenance - Catia IV Importer - Node

SMA80018: Maintenance 1 Year - Catia IV Importer - Float

Maintenance - Catia IV Importer - Float

SMA80019: Maintenance 1 Year - UniGraphics Importer - Node or Float

Maintenance - UniGraphics Importer - Node or Float

SMA80020: Maintenance 1 Year - SolidWorks Importer - Node or Float

Maintenance - SolidWorks Importer - Node or Float

SMA80021: Maintenance 1 Year - Capture added to existing Wrap.

Maintenance 1 year - Capture added to existing Wrap.

SMA80022: Maintenance 1 Year - Fashion

Maintenance 1 Year - Fashion

SMA80023: Maintenance 1 Year - Shape Added to Studio Fashion

Maintenance 1 Year - Shape Added to Studio Fashion

SMA80024: Maintenance 1 Year - Shape Added to Studio Fashion with Qualify

Maintenance 1 Year - Shape Added to Studio Fashion with Qualify

SMA80025: Maintenance 1 Year - Renewal-All Educational Seats co-terminus

Maintenance 1 Year - All Educational Seats co-terminus. Educational Maintenance is one time annual fee for all seats

SMA80028: Maintenance Fashion

Maintenance Fashion



Software --> Program Maintenance --> Third Party --> Geomagic

SMA80029: Maintenance Shape

Maintenance Shape

INOVx

IWS-313: RealityLINx Exch. Maint., 1yr.

1 year maintenance for RealityLINx Exchange software from INOVx.

IWS-314: RealityLINx Modl. Maint., 1yr.

1 year maintenance for RealityLINx Model software from INOVx.

Rental

SOFT90001-RNT: PolyWorks/Modeler & Inspector, with NURBS 30-Day Rental

PolyWorks/Modeler & Inspector, with NURBS 30-day license for PRODUCTION purposes. Note: One-month credit will be applied on the list price of the license to be purchased, provided that InnovMetric receives a purchase order within 90 days following the end of the rental period. (Applies only if the rented license is the same as the purchased license. If the case, please mention „Includes Rental Credit‟ on the PO.)

SOFT90002-RNT: PolyWorks/Modeler & PolyWorks/Inspector 30-Day Rental

PolyWorks/Modeler & PolyWorks/Inspector 30-day license for PRODUCTION purposes. Note: If the customer decides to purchase the PolyWorks license after having rented it, a one-month credit will be applied on the list price of the license to be purchased, provided that InnovMetric receives a purchase order within 90 days following the end of the rental period. (Applies only if the rented license is the same as the purchased license. If the case, please mention „Includes Rental Credit‟ on the PO.)

SOFT90003-RNT: PolyWorks/Modeler with NURBS 30-Day Rental

PolyWorks/Modeler with NURBS 30-day license for PRODUCTION purposes. Note: One-month credit will be applied on the list price of the license to be purchased, provided that InnovMetric receives a purchase order within 90 days following the end of the rental period. (Applies only if the rented license is the same as the purchased license. If the case, please mention „Includes Rental Credit‟ on the PO.)

SOFT90004-RNT: PolyWorks/Modeler 30-Day Rental

PolyWorks/Modeler 30-day license for PRODUCTION purposes. Note: One-month credit will be applied on the list price of the license to be purchased, provided that InnovMetric receives a purchase order within 90 days following the end of the rental period. (Applies only if the rented license is the same as the purchased license. If the case, please mention „Includes Rental Credit‟ on the PO.)

SOFT90005-RNT: PolyWorks/Inspector 30-Day Rental

PolyWorks/Inspector 30-day license for PRODUCTION purposes. Note: One-month credit will be applied on the list price of the license to be purchased, provided that InnovMetric receives a purchase order within 90 days following the end of the rental period. (Applies only if the rented license is the same as the purchased license. If the case, please mention „Includes Rental Credit‟ on the PO.)



Software --> Rental

SOFT90028-RNT: PolyWorks/Surveyor 30-Day Rental

PolyWorks/Surveyor 30-day license for PRODUCTION purposes. Note: One-month credit will be applied on the list price of the license to be purchased, provided that InnovMetric receives a purchase order within 90 days following the end of the rental period. (Applies only if the rented license is the same as the purchased license. If the case, please mention „Includes Rental Credit‟ on the PO.)

SOFT90029-RNT: PolyWorks/Surveyor & Modeler 30-Day Rental

PolyWorks/Surveyor & Modele 30-day license for PRODUCTION purposes. Note: One-month credit will be applied on the list price of the license to be purchased, provided that InnovMetric receives a purchase order within 90 days following the end of the rental period. (Applies only if the rented license is the same as the purchased license. If the case, please mention „Includes Rental Credit‟ on the PO.)

Other

SOFT90025: Polyworks Additional Dongle (USB)

Polyworks Additional Dongle (USB)



Training --> FARO --> Facility --> Laser Scanner

Training

FARO

Facility

Laser Scanner

TR-LS-SCAN-F: Laser Scanner Basic Training - 3-Day - Facility

Laser Scanner Basic Training - Facility. 3-Day course for Three (3) Trainees at an approved FARO training facility that discusses LS operation, setup, and basic measurements. NOTE: Classroom Trainings are limited to Six (6) trainee and are scheduled on a first come first served basis. Classes can be canceled within two weeks of the scheduled date if sufficient enrollment is not met. Training must be taken within 90 days of purchase.

On-site

Laser Scanner

TR-LS-APPSPEC-O1: Laser Scanner Application Specific Training – 1-Day - On-site

Laser Scanner Application Specific Training - On-site. 1-Day on-site Laser Scanner LS application specific training customized for customer application. Training to be conducted at customer site. Shipping and travel expenses are included in most countries. Up to SIX (6) trainees. Equipment rental not included. Price per class. Training must be taken within 90 days of purchase.

TR-LS-APPSPEC-OADAY: Laser Scanner Application Specific Training -Additional Day - On-site

Laser Scanner Application Specific Training -Additional Day. On-site Laser Scanner LS application specific training customized for customer application. Training to be conducted at customer site. Shipping and travel expenses are included in most countries. Up to Six (6) trainees. Equipment rental not included. Price per class. Training must be taken within 90 days of purchase. NOTE: This additional day must be taken in conjunction with TR-LS-APPSPEC-O1.

TR-LS-POS-O: Laser Scanner Basic Training POS Upgrade - 3-Day - On-site

Laser Scanner Basic Training POS Upgrade. Upgrade part number 'TR-LS-SCAN-F' at POINT-OF-SALE to 3-Day on-site training course that discusses the principles of LS operation, setup, and basic measurements. Training to be conducted at customer site. Shipping and travel expenses are included in most countries. Up to Four (4) trainees. On-Site Trainings are designed for up to Four (4) trainees to ensure proper transfer of knowledge and understanding. Price per class. Training must be taken within 90 days of purchase.

TR-LS-SCAN-O: Laser Scanner Basic Training - 3-Day - On-site

Laser Scanner Basic Training - On-site. 3-Day On-site training course that discusses the principles of LS operation, setup, and basic measurements. Training to be conducted at customer site. Shipping and travel expenses are included in most countries. Up to Four (4) trainees. On-Site Trainings are designed for up to Four (4) trainees to ensure proper transfer of knowledge and understanding. Price per class. Training must be taken within 90 days of purchase.

3rd Party

TR-LS-PTED-APAC: Training PointTools Edit, APAC

Pointools Edit software training. Two (2) days. Includes travel costs and expenses for Asia Pacific



Training --> 3rd Party

TR-LS-PTED-EU: Training PointTools Edit, EU

Pointools Edit software training. Two (2) days. Includes travel costs and expenses for Europe.

TR-LS-PTED-MEA: Training PointTools Edit, MEA

Pointools Edit software training. Two (2) days. Includes travel costs and expenses for Middle East/Africa

TR-LS-PTED-NA: Training PointTools Edit, NA

Pointools Edit software training. Two (2) days. Includes travel costs and expenses for North America

TR-LS-PTMD-APAC: Training PointTools Model, AP

Pointools Model software training. One (1) day. Excludes AutoCAD-Training. Includes travel costs and expenses for Asia Pacific.

TR-LS-PTMD-EU: Training PoinTools Model, EU

"Pointools Model software training. 1 day. Excl. AutoCAD-Training. Includes travel costs and expenses for Europe

TR-LS-PTMD-MEAEA: Training PointTools Model, MEA

Pointools Model software training. One (1) day. Excludes AutoCAD-Training. Includes travel costs and expenses for middle East/Africa.

TR-LS-PTMD-NA: Training PointTools Model, NA

Pointools Model software training. One (1) day. Excludes AutoCAD-Training. Includes travel costs and expenses for North America.

TR-LS-PTMD-SA: Training PointTools Model, SA

Pointools Model software training. One (1) day. Excludes AutoCAD-Training. Includes travel costs and expenses for South America

Facility

Geomagic

STR80001: Wrap with Capture Training (2 days) Geomagic Facility - North Carolina, USA

Training - Geomagic Wrap with Capture - Two days instructor-led course. Travel and lodging expense paid by student. Priced per person.



Training --> 3rd Party --> Facility --> Geomagic

STR80002: Qualify Training (3 days) Geomagic Facility - North Carolina, USA

This three-day instructor-led course is designed to help users evaluate the benefits of computer-aided inspection and how to succeed in developing automated inspection processes. The user will learn how to align scan data with CAD models, compare the scan data to the CAD models, perform additional analysis, generate reports and automate this inspection process for repeatability. Travel and lodging expense paid by student. Priced per person.

STR80003: Studio Shape Edition Training (3 days) Geomagic Facility - North Carolina, USA

Geomagic Facility - North Carolina, USA - This three-day instructor-led course covers the concept of using Digital Shape Sampling and Processing (DSSP) with Geomagic Studio Shape Edition. The user will learn how to interact with the application, edit point cloud data, generate and edit STL models and generate NURBS surfaces for downstream applications. Travel and lodging expense paid by student. Priced per person.

STR80004: Studio Shape Edition and Qualify Training (5 days) Geomagic Facility - North Carolina, USA

Geomagic Facility - North Carolina, USA - This five-day instructor-led course covers Geomagic Studio Shape Edition - Course covers the concept of using Digital Shape Sampling and Processing (DSSP) with Geomagic Studio Shape Edition. The user will learn how to interact with the application, edit point cloud data, generate and edit STL models and generate NURBS surfaces for downstream applications. Geomagic Qualify - Course is designed to help users evaluate the benefits of computer-aided inspection and how to succeed in developing automated inspection processes. The user will learn how to align scan data with CAD models, compare the scan data to the CAD models, perform additional analysis, generate reports and automate this inspection process for repeatability. Travel and lodging expense paid by student. Priced per person.

STR80005: Studio Fashion Edition Training (3 days)- Geomagic Facility - North Carolina, USA.

This three-day instructor-led course covers the concept of using Digital Shape Sampling and Processing (DSSP) with Geomagic Studio Fashion Edition. The user will learn how to interact with the application, edit point cloud data, generate and edit STL models and generate CAD-like surfaces for downstream applications. Travel and lodging expense paid by student. Priced per person.

STR80006: Studio Fashion Edition with Qualify Training (5 days) - Geomagic Facility - North Carolina, USA

This five-day instructor-led course covers: Geomagic Studio Fashion - This course covers the concept of using Digital Shape Sampling and Processing (DSSP) with Geomagic Studio Fashion Edition. The user will learn how to interact with the application, edit point cloud data, generate and edit STL models and generate CAD-like surfaces for downstream applications.Geomagic Qualify - Course is designed to help users evaluate the benefits of computer-aided inspection and how to succeed in developing automated inspection processes. The user will learn how to align scan data with CAD models, compare the scan data to the CAD models, perform additional analysis, generate reports and automate this inspection process for repeatability. Priced per person.

STR80007: Studio Complete Training (4 days) Geomagic Facility - North Carolina, USA.

This four-day instructor-led course covers the concept of using Digital Shape Sampling and Processing (DSSP) with Geomagic Studio Complete Edition. The user will learn how to interact with the application, edit point cloud data, generate and edit STL models and generate NURBS surfaces or CAD-like surfaces for downstream application. Priced per person.



Training --> 3rd Party --> Facility --> Geomagic

STR80017: Studio Shape Edition Training Advanced Class (2 days) Geomagic Facility - North Carolina, USA

Geomagic Facility - North Carolina, USA - Studio Shape Edition Advanced Class (2 days) Travel and lodging expense paid by student. Priced per person.

STR80018: Studio Shape Edition Advanced Training Class (2 days) Onsite North America

Studio Shape Edition Training Advanced Class (2 days) Onsite North America. 8 students maximum, plus travel.

STR80019: Custom Additional Day Onsite Training North America

Custom Additional Day Onsite Training North America. Must be added to existing class. 8 students maximum, plus travel. $2,000.00 per day.

STR80029: Travel -Actual Expenses Billed Post Training

All inclusive travel expenses for on-site training - Actual expenses billed post training. Mandatory 2 weeks required notice of the training to Geomagic before scheduling class. Expenses include travel, food and lodging. (US Only)

STR90001: PolyWorks/ Modeler&Inspector pkg - 5 day FACILITY training

5-day „basic‟ training on PolyWorks/Modeler&Inspector package (T5QB), at InnovMetric (Quebec City). „Classroom type‟ training at pre-determined dates. Up to TWO trainees may register for each license ordered. Trainees must bear their own T&L expenses. Must both register to the same Classroom training and confirm directly with InnovMetric. Must be scheduled within one year from license purchase. After one year, regular fees to apply.

STR90001-ADD: PolyWorks/ Modeler&Inspector pkg - 5 day FACILITY training- 1 Additional Trainee

One (1) additional trainee for 5-day „basic‟ training (STR90001) on PolyWorks/Modeler & Inspector™, at InnovMetric (Quebec City). Limit Six (6) total trainees for class and all must attend same class. Trainee must bear their own T&L expenses.

STR90002: PolyWorks/Modeler OR on PolyWorks/Inspector package - 3 day FACILITY training

3-day „basic‟ training on PolyWorks/Modeler OR on PolyWorks/Inspector package, at InnovMetric (Quebec City). „Classroom type‟ training at pre-determined dates. Up to TWO trainees may register for each license ordered. Trainees must bear their own T&L expenses. Must both register to the same Classroom training and confirm directly with InnovMetric. Must be scheduled within one year from license purchase. After one year, regular fees to apply.

STR90002-ADD: PolyWorks/ Modeler or Inspector pkg - 3 day FACILITY training- 1 Additional Trainee

1 additional trainee for 3day „basic‟ training on PolyWorks/Modeler OR on PolyWorks/Inspector package, at InnovMetric (Quebec City). Limit 6 total trainees for class and all must attend same class. Trainee must bear their own T&L expenses.



Training --> 3rd Party --> Facility --> 3 Day

STR90006: PolyWorks/Modeler OR on PolyWorks/Inspector package - 3-day „Advanced‟ FACILITY training

3-day „advanced‟ training on PolyWorks/Modeler OR on PolyWorks/Inspector package, at InnovMetric (Quebec City). Trainees must bear their own T&L expenses. For up to 6 people. Client must have attended a PolyWorks „basic‟ training prior to ordering an „advanced‟ training.

STR90010: PolyWorks/Inspector Probing package - 2-day FACILITY training

2-day training on PolyWorks/Inspector Probing package, at InnovMetric (Quebec City). „Hands-on‟ training at pre-determined dates. Up to two trainees may register. Trainees must bear their own T&L expenses. Must both register to the same training and confirm directly with InnovMetric.Note : No more than four attendants (from two different organizations) in total for any such training.

On-site

3 Day

STR90003: PolyWorks/Modeler package - 3-day „basic‟ ON-SITE training

3-day „basic‟ training on PolyWorks/Modeler package, on-site. Trainer travel expenses included. Training at customer site for up to 6 people. (USA, Canada, Mexico)

STR90003-SA: PolyWorks/Modeler package - 3-day „basic‟ ON-SITE training

3-day „basic‟ training on PolyWorks/Modeler package, on-site. Trainer travel expenses included. Training at customer site for up to 6 people. (South America)

STR90004: PolyWorks/Inspector package - 3-day „basic‟ ON-SITE training

3-day „basic‟ training on PolyWorks/Inspector package, on-site. Trainer travel expenses included. Training at customer site for up to 6 people. (USA, Canada, Mexico)

STR90004-SA: PolyWorks/Inspector package - 3-day „basic‟ ON-SITE training

3-day „basic‟ training on PolyWorks/Inspector package, on-site. Trainer travel expenses included. Training at customer site for up to 6 people. (South America)

STR90005: PolyWorks/Modeler 3-day „basic‟ ON-SITE training AND PolyWorks/Inspector package 3-day „basic‟ ON-SITE training

3-day „basic‟ training on PolyWorks/Modeler, AND an additional 3-day „basic‟ training on PolyWorks/Inspector package, on-site. Scheduled at two different times. Trainer travel expenses included. Training at customer site for up to 6 people. Client must have ordered at least one PolyWorks/Modeler&Inspector package. (USA, Canada, Mexico)

STR90005-SA: PolyWorks/Modeler 3-day „basic‟ ON-SITE training AND PolyWorks/Inspector package 3-day „basic‟ ON-SITE training

3-day „basic‟ training on PolyWorks/Modeler, AND an additional 3-day „basic‟ training on PolyWorks/Inspector package, on-site. Scheduled at two different times. Trainer travel expenses included. Training at customer site for up to 6 people. Client must have ordered at least one PolyWorks/Modeler&Inspector package. (South America)



Training --> 3rd Party --> On-site --> 3 Day

STR90007: PolyWorks/Modeler OR on PolyWorks/Inspector package - 3-day „Advanced‟ ONSITE training

3-day „advanced‟ training on PolyWorks/Modeler OR on PolyWorks/Inspector package, on-site. Trainer travel expenses included. Training at customer site for up to 6 people. (USA, Canada, Mexico)

STR90007-SA: PolyWorks/Modeler OR on PolyWorks/Inspector package - 3-day „Advanced‟ ONSITE training

3-day „advanced‟ training on PolyWorks/Modeler OR on PolyWorks/Inspector package, on-site. Trainer travel expenses included. Training at customer site for up to 6 people. (South America)

STR90008: “Surveying” training - 3-day ON-SITE training

3-day “Surveying” training, on-site. Trainer travel expenses included. Training at customer site for up to 6 people. (USA, Canada, Mexico)

STR90008-SA: “Surveying” training - 3-day ON-SITE training

3-day “Surveying” training, on-site. Trainer travel expenses included. Training at customer site for up to 6 people. (South America)

STR90009: PolyWorks/Inspector Probing package - 2-day ON-SITE training

2-day training on PolyWorks/Inspector Probing package, on-site. Trainer travel expenses included. Training at customer site for up to 6 people. (USA, Canada, Mexico)

STR90009-SA: PolyWorks/Inspector Probing package - 2-day ON-SITE training

2-day training on PolyWorks/Inspector Probing package, on-site. Trainer travel expenses included. Training at customer site for up to 6 people. (South America)

Geomagic

STR80008: Wrap with Capture Training - Onsite (2 days) North America

Training - Geomagic Wrap with Capture - Instructor-led two day class. Eight (8) students maximum, plus travel. Actual travel expenses invoiced separately for on-site training.

STR80009: Qualify - Training On-Site (3 days) - North America

Actual travel expenses invoiced separately for on-site training. This three-day instructor-led course is designed to help users evaluate the benefits of computer-aided inspection and how to succeed in developing automated inspection processes. The user will learn how to align scan data with CAD models, compare the scan data to the CAD models, perform additional analysis, generate reports and automate this inspection process for repeatability. 8 students maximum, plus travel. Travel expenses invoiced separately.



Training --> 3rd Party --> On-site --> Geomagic

STR80010: Studio Shape Edition - Training On-Site (3 days) - North America

Actual travel expenses invoiced separately for on-site training. This three-day instructor-led course covers the concept of using Digital Shape Sampling and Processing (DSSP) with Geomagic Studio Shape Edition. The user will learn how to interact with the application, edit point cloud data, generate and edit STL models and generate NURBS surfaces for downstream applications. 8 students maximum, plus travel. Travel expenses invoiced separately.

STR80011: Studio Shape Edition with Qualify Training On-Site (5 days)- North America

Actual travel expenses invoiced separately for on-site training. This five-day instructor-led course covers: Geomagic Studio Shape Edition - Course covers the concept of using Digital Shape Sampling and Processing (DSSP) with Geomagic Studio Shape Edition. The user will learn how to interact with the application, edit point cloud data, generate and edit STL models and generate NURBS surfaces for downstream applications.Geomagic Qualify - Course is designed to help users evaluate the benefits of computer-aided inspection and how to succeed in developing automated inspection processes. The user will learn how to align scan data with CAD models, compare the scan data to the CAD models, perform additional analysis, generate reports and automate this inspection process for repeatability. 8 students maximum, plus travel. Travel expenses invoiced separately.

STR80012: Studio Fashion Training On-Site (3 days)- North America

Actual travel expenses invoiced separately for on-site training. This three-day instructor-led course covers the concept of using Digital Shape Sampling and Processing (DSSP) with Geomagic Studio Fashion Edition. The user will learn how to interact with the application, edit point cloud data, generate and edit STL models and generate CAD-like surfaces for downstream applications. 8 students maximum, plus travel. Travel expenses invoiced separately.

STR80013: Studio Fashion with Qualify Training On-Site (5 days) - North America

Actual travel expenses invoiced separately for on-site training. Geomagic Studio Fashion - This course covers the concept of using Digital Shape Sampling and Processing (DSSP) with Geomagic Studio Fashion Edition. The user will learn how to interact with the application, edit point cloud data, generate and edit STL models and generate CAD-like surfaces for downstream applications.Geomagic Qualify - Course is designed to help users evaluate the benefits of computer-aided inspection and how to succeed in developing automated inspection processes. The user will learn how to align scan data with CAD models, compare the scan data to the CAD models, perform additional analysis, generate reports and automate this inspection process for repeatability. 8 students maximum, plus travel. Travel expenses invoiced separately.

STR80014: Studio Complete Edition Training On-Site (4 days) - North America

Actual travel expenses invoiced separately for on-site training. This four-day instructor-led course covers the concept of using Digital Shape Sampling and Processing (DSSP) with Geomagic Studio Complete Edition. The user will learn how to interact with the application, edit point cloud data, generate and edit STL models and generate NURBS surfaces or CAD-like surfaces for downstream application. 8 students maximum, plus travel. Travel expenses invoiced separately.

STR80032: Train Recon CORE, ROW

Training at customer site for JRC 3D Reconstructor, module CORE.1 day.Incl. travelcosts and expenses for countries ouside of Europe

STR80033: Train Recon CORE+1, ROW

Training at customer site for JRC 3D Reconstructor, module CORE plus 1 additional module.2 days.Incl. travelcosts and expenses for countries ouside of Europe



Training --> 3rd Party --> On-site --> GEXCEL Reconstructor

STR80034: Train Recon CORE+2 or +3, ROW

Training at customer site for JRC 3D Reconstructor, module CORE plus 1 additional module.3 days.Incl. travelcosts and expenses for countries ouside of Europe

STR80035: Train Recon 3DMgr/GeoMec, ROW

Training at customer site for JRC 3DManger or GeoMec1 day.Incl. travelcosts and expenses for countries ouside of Europe

TR-LS-ATS-F: ATS Real-Reality Tunnel Software Basic Training Onsite

Basic training for ATS RR Tunnel. Price per training day. Up to 3 students. Travel costs and expenses are not included.

TR-LS-INOV-F: INOVx 3D RealityLINx Basic Training

Basic Training for INOVx 3D RealityLINx software at an approved INOVx training facility. Travel costs and expenses are NOT included. Price per day. For details check with your FARO account manager.

TR-LS-PT4R-APAC: Training - PoinTools 4 Rhino (Asia/Pacific)

One day only, On-site Training for PoinTools 4 Rhino software (current version). Note: Rhino 3D training not included. Limit 6 per class, travel costs and expenses included in Asia/Pacific.

TR-LS-PT4R-MEA: Training - PoinTools 4 Rhino (Middle East/Africa)

One day only, On-site Training for PoinTools 4 Rhino software (current version). Note: Rhino 3D training not included. Limit 6 per class, travel costs and expenses included in Middle East/Africa.

TR-LS-PT4R-NA: Training - PoinTools 4 Rhino (North America)

One day only, On-site Training for PoinTools 4 Rhino software (current version). Note: Rhino 3D training not included. Limit 6 per class, travel costs and expenses included in North America.

TR-LS-PT4R-SA: Training - PoinTools 4 Rhino (South America)

One day only, On-site Training for PoinTools 4 Rhino software (current version). Note: Rhino 3D training not included. Limit 6 per class, travel costs and expenses included in South America.

TR-LS-PTVP-APAC: Training - PoinTools View Pro (Asia/Pacific)

Two days only, On-site Training for PoinTools View Pro software (current version). Limit 6 per class, travel costs and expenses included in Asia/Pacific.



Training --> 3rd Party --> On-site --> PoinTools

TR-LS-PTVP-MEA: Training - PoinTools View Pro (Middle East/Africa)

Two days only, On-site Training for PoinTools View Pro software (current version). Limit 6 per class, travel costs and expenses included in Middle East/Africa.

TR-LS-PTVP-NA: Training - PoinTools View Pro (North America)

Two days only, On-site Training for PoinTools View Pro software (current version). Limit 6 per class, travel costs and expenses included in North America.

TR-LS-PTVP-SA: Training - PoinTools View Pro (South America)

Two days only, On-site Training for PoinTools View Pro software (current version). Limit 6 per class, travel costs and expenses included in South America.



Warranty --> FARO Laser Scanner --> Warranty --> Standard --> 2 years

Warranty

FARO Laser Scanner

Warranty

Standard

2 years

SWS-LS-2: Std Wty LaserScanner LS, 2 yr

Two year Standard Warranty that includes parts and labor on service and Return shipping to customer within warranty period. Recertification/Calibration is upon renewal only after 1st year of delivery. Does NOT include loaner scanner during service period.

1 Month

ESP-SCAN-1: LS-1 Month Warranty Extension

One Month extension to existing standard LS warranty. This part number is not to be used as a stand alone warranty.

1 Month

EPP-SCAN-1: LS-1 Month Premium Warranty Extension

One Month extension to existing Premium LS warranty. This part number is not to be used as a stand alone warranty.

SWS-LS: Standard Warranty Laser Scanner LS - 1 year

One year Standard Warranty that includes parts and labor on service and Return shipping to customer within warranty period. Recertification/Calibration is upon renewal only after 1st year of delivery. Does NOT include loaner scanner during service period.

SWS-LS-UPGD: Standard Warranty Laser Scanner LS - Photon Upgrade - 1 Year

One year Standard Warranty that includes parts and labor on service and Return shipping to customer within warranty period. Does NOT include loaner scanner during service period. ATTENTION: This item is only valid when ordered together with an upgrade of a LS 880/820/420 scanner to the latest Photon specifications.

1 year

PWS-LS: Premium Warranty Laser Scanner LS - 1 year

One year Premium Warranty that includes parts and labor on service and all shipping charges to customer within warranty period. Recertification/Calibration is upon renewal only after 1st year of delivery. FARO will supply a loaner scanner shipped the next business day at no cost dependent on availability.

Upgrade 1 year

PWSS-LS-1ST: Premium Warranty Laser Scanner LS 1st year, POS

Upgrade of 1st year Standard Warranty plan to a One year Premium Warranty Plan at a discounted price (valid only at Point-of-Sale). Warranty includes parts and labor on service, and all shipping charges for the FARO Laser Scanner. Recertification/Calibration is upon renewal only after 1st year of delivery. FARO will supply a loaner scanner shipped the next business day at no cost dependent on availability.



Warranty --> FARO Laser Scanner --> Warranty --> Premium --> 3 years

3 years

PWS-LS-3: Premium Warranty LaserScanner LS, 3 years

Three year Premium Warranty that includes Recertification/Calibration within warranty period, parts and labor on service, and all shipping charges for the FARO Laser Scanner. FARO will supply a loaner scanner shipped the next business day at no cost dependent on availability.

Upgrade 3 years

PWSS-LS-3-1ST: Premium Warranty Laser Scanner LS, 3 years, POS

Upgrade of 1st year Standard Warranty plan to a three year Premium Warranty Plan at a discounted price (valid only at Point-of-Sale). Warranty includes yearly Recertification/Calibration within warranty period, parts and labor on service, and all shipping charges for the FARO Laser Scanner. FARO will supply a loaner scanner shipped the next business day at no cost dependent on availability.

Certification

NWS-LS: Non-warranty evaluation Laser Scanner LS

FARO Laser Scanner LS test and analysis fee. Recertification/Calibration service is included and valid for one year from certification date. This is a one-time service and is not a Warranty plan. Additional services are NOT included in this fee. Parts, labor and shipping charges are NOT included.



Service --> Rental

Service

Rental

CTRL-LS-RENTAL: Laser Scanner LS Monthly Rental

Rental fee for LS Laser Scanner Equipment including: aluminum tripod, starter kit (registration spheres), LS portable battery kit & charger, notebook computer and FARO Scene (installed on the notebook computer).FARO Training req'd prior to operating equipment. Price per Month.


Faro Ls Catalog

Documents

Transcript of Faro Ls Catalog