Farnese LYNX Bridge Saw - GranQuartz...Farnese LYNX Bridge Saw granquartz.com FEATURES: The LYNX is...
Transcript of Farnese LYNX Bridge Saw - GranQuartz...Farnese LYNX Bridge Saw granquartz.com FEATURES: The LYNX is...
Farnese LYNX Bridge Saw
granquartz.com
FEATURES:The LYNX is a bridge saw which can function as a main or an auxilary saw. It is fully motorized and comprised of a square main beam suspended between 2 end rails. The main beam moves in and out (long-travel) along the end rails and the cutting head moves left and right (cross-travel) along the main beam. A full 360º rotating table enables precision cutting of material edges. All the mechanized functions of the machine are controllable via a pendant station.
BRIDGE MEASURING SYSTEM: the LYNX is equipped with a measuring system enabling electronic measurement of the distance travelled (long travel) in both an in and out direction. As the operator moves the bridge in and out the display shows the distance travelled and it can easily be cleared to zero at the touch of a button.
PENDANT STATION: located to the side of the cutting area. The standard auto system
allows the operator to program and execute multiple cuts of predetermined widths. The machine also has a homing feature that allows the operator to send the cutting blade to the home position (away from the working area) at the touch of a button.
TILT TABLE: the table capability to tilt from 0 to 80º allows easy loading of slabs. It is powered by a set of heavy duty hydraulic pistons, requiring 240V electricity supply.
ALUMINUM BLADE COVER: made of corrosion resistant aluminum guards against spatter.
TILTING OF THE BLADE: This system allows automatic tilt of the blade to a maximum angle of 45º for mitre cuts as the whole head inclines, plunge cutting is possible.
ACCOMODATES BLADES UP TO 0550
AUTOMATIC REPEAT CUTS
TILT TABLE FOR LOADING
PLUNGE CUTTING AT 45º ADJUSTABLE
BRIDGE MEASURING SYSTEM
LASER FULLY INSTALLED
PENDANT STATION
ALUMINUM BLADE COVER
MOTORIZED UP/DOWN MOVEMENT
AUTO TILTING OF THE BLADE & HEAD
VARIABLE CUTTING SPEED
20HP MOTOR
TILTING TURNTABLE DIMENSIONS (LxW)
3200MMx1800MM 126” X 71”
CUTTING WIDTH (CROSS TRAVEL STROKE)
3700MM 142”
CUTTING LENGTH (LONG TRAVEL STROKE)
3700MM 142”
VERTICAL MOVEMENT OF CUTTING HEAD (UP AND DOWN)
280MM 11”
TILT OF BLADE 90-45º
TURNTABLE ROTATION 0-360º, WITH FIXED STOPS AT 0 & 90ºPLUS SCREW STOP AT ANY OTHER POSITION
BLADE DIAMETER 550MM MAX 22” MAX
BLADE SHAFT DIAMETER 60MM 2.36”
MAIN MOTOR 20HP
MACHINE DIMENSIONS (LxWxH) 5400 MM x 4500MM x 2100MM
212” x 177” x 83”
MACHINE WEIGHT 3500KG (APPROX.)
7000 POUNDS
CONNECTIONS REQUIRED (SUPPLIED BY CUSTOMER) POWER, WATER, COMPRESSED AIR
TECHNICALSPECIFICATIONS: