AMERICAN AG GBD BED SHAPERS

Models : GBS-D36 & GBS-D38 sizes are available for different tractors. Bed Shapers can be used to form new beds in loose seedbed soil. These bed shaper feature a bed height of 6" and fixed bed top of 18" to 20" width.

OPTIONS

Optional equipment includes a Double drip irrigation attachment for two row drip tape with brake.

> helps conserve both soil and water by reducing runoff and evaporation.> water savings can be as much as 50% when compared to flood irrigation systems.> increase crop yields by as much as 30% by putting water directly into the root zone.> precise placement also reduces crop chemical and fertilizer usage.

AMERICAN AG ENTERPRISES LLC--3072 W. JENSEN AVE. FRESNO, CA 93706 TELEPHONE:(559) 499-0277 FAX:(559) 499-0278

Due to continuing improvements in the design and manufacture of American Ag products, all specification contained herein are subject to change without notice.

Page 1

AMERICAN AG GFC

3-IN-1 FIELD CULTIVATOR

Model Size Description Application

GFC-800-SC 8'-0"

FIELD CULTIVATOR WITH SPIKE AND CRUMBLER

10 ft. Rows

GFC-1000-SC 10'-0" 12 ft. Rows

GFC-1200-SC 12'-0" 14 ft. Rows

GFC-1400-SC 14'-0" 16 ft. Rows

Model Size Description Application

GFC-800 8'-0" 10 ft. Rows

GFC-1000 10'-0" FIELD CULTIVATOR 12 ft. Rows

GFC-1200 12'-0" 14 ft. Rows

GFC-1400 14'-0" 16 ft. Rows

AMERICAN AG ENTERPRISES LLC--3072 W. JENSEN AVE. FRESNO, CA 93706 TELEPHONE:(559) 499-0277 FAX:(559) 499-0278

Due to continuing improvements in the design and manufacture of American Ag products, all specification contained herein are subject to change without notice. Page 2

AMERICAN AG GFF

FLAT FURROWER

GFF-20 Flat Furrower with GFF-TH-01 Twist

Head

GFF-20 Flat Furrower with GFF-MS-24 Mounting Shank

Model Description Approx. Weight

GFF-20 20" FLAT FURROWER 55 lbs.

GFF-30 30" FLAT FURROWER 62 lbs.

GFF-TH-01 TWIST HEAD FOR 2-1/4" SQ. TOOL BAR 28 lbs.

GFF-MS-24 MOUNTING SHANK 24" 33 lbs.

Note: Mounting Shank and Twist Head Shown in Picture are Optional Equipment

AMERICAN AG ENTERPRISES LLC--3072 W. JENSEN AVE. FRESNO, CA 93706 TELEPHONE:(559) 499-0277 FAX:(559) 499-0278

Due to continuing improvements in the design and manufacture of American Ag products, all specification contained herein are subject to change without notice.

Page 3

AMERICAN AG GHWO

GHWO wheel controlled offset disc harrows are built to provide maximum performance at a reasonable price. These harrows move fast through cover crops and field trash, cutting and burying it in single pass. They are available in widths from 6' 9" to 12' 0". Gang angle can be adjusted from 12 to 24 degree. These machines are available in 1-1/2" sq. high tensile steel axles with 24" or 26" blades. Depth control, Transport Lock, hitch jack and hoses with quick couplers are standard equipment on these discs.

Gangs Independently adjustable front Standard Equipment Depth control, split axle, transport lock, hitch.and rear,12 deg. - 24 deg.

Frame Tubular main and gang framesGang Axle 1-1/2" sq. High tensile steel Optional Equipment 24" or 26" x 1/4" blades, blade

scrapers, greaseable bearings, clevis tongue,hose kit.

Hitch Spring Cushioned with leveling control

Model Gang Axle

No. of Blades

Blade Spacing

Width of cut

approx. Weight

H.P. Tractor

GHWO-2418 18 9" 6' 9" 3125 lbs. 55 - 60GHWO-2420 20 9" 7' 6" 3200 lbs. 60 - 70GHWO-2422 22 9" 8' 3" 3375 lbs. 65 - 75GHWO-2424 24 9" 9' 0" 3550 lbs. 70 - 85GHWO-2426 1-1/2" Sq. 26 9" 9' 9" 3725 lbs. 80-95GHWO-2428 28 9" 10' 6" 3800 lbs. 90-105GHWO-2430 30 9" 11' 3" 3875 lbs. 100-115GHWO-2432 32 9" 12' 0" 3950 lbs. 110-120

AMERICAN AG ENTERPRISES LLC--3072 W. JENSEN AVE. FRESNO, CA 93706 TELEPHONE:(559) 499-0277 FAX:(559) 499-0278

Due to continuing improvements in the design and manufacture of American Ag products, all specification contained herein are subject to change without notice.

Page 4

AMERICAN AG GHWO-X

GHWO-X wheel controlled offset disc harrows are built to provide maximum performance at a reasonable price. These harrows move fast through cover crops and field trash, cutting and burying it in single pass. They are available in widths from 10' 6" to 14' 3". Gang angle can be adjusted from 12 to 24 degree. These machines are available in 1-1/2" sq. high tensile steel axles with 24" or 26" blades. Depth control, Transport Lock, hitch jack and hoses with quick couplers are standard equipment on these discs.

Gangs Independently adjustable front Standard Equipment Depth control, split axle, transport lock, hitch jack.and rear,12 deg. - 24 deg.

Frame Tubular main and gang framesGang Axle 1-1/2" sq. High tensile steel Optional Equipment 24" or 26" x 1/4" blades, blade

scrapers, grease able bearings, clevis tongue,hose kit.

Hitch Spring Cushioned with leveling control

Model Gang Axle

No. of Blades

Blade Spacing

Width of cut

approx. Weight

H.P. Tractor

GHWO-X-2428 28 9" 10' 6" 4900 lbs. 90-105GHWO-X-2430 30 9" 11' 3" 5100 lbs. 105-110GHWO-X-2432 1-1/2" Sq. 32 9" 12' 0" 5300 lbs. 110-115GHWO-X-2434 34 9" 12' 9" 5500 lbs. 115-120GHWO-X-2436 36 9" 13' 6" 5700 lbs. 120-125GHWO-X-2438 38 9" 14' 3" 5900 lbs. 125-130

AMERICAN AG ENTERPRISES LLC--3072 W. JENSEN AVE. FRESNO, CA 93706 TELEPHONE:(559) 499-0277 FAX:(559) 499-0278

Due to continuing improvements in the design and manufacture of American Ag products, all specification contained herein are subject to change without notice.

Page 5

AMERICAN AG GLO GHO

GLO & GHO 3 pt. lift offset disc harrows are built to with self-aligning trunion type bearing assemblies. These offset harrows provide a low cost, minimum maintenance solution to your disking. They are available in widths from 5' 3" to 8' 3". Gang angle can be adjusted from 12 to 24 degree. These machines are available in 1-1/8" or 1-1/2" sq. gang axles with 22" or 24" blades.

Gangs Independently adjustable front Standard Equipment Cat 1 & 2 'A' frame, lift pinsand rear,12 deg. - 24 deg.

Frame Tubular main and gang frames Optional Equipment Drag Brackets, Scraper blades, front and rear extension spoolsGang Axle 1-1/8" OR 1-1/2" sq. High tensile

steel

Model Gang Axle

No. of Blades

Blade Spacing

Width of cut

approx. Weight

H.P. Tractor

GLO-2214 14 9" 5' 3" 1115 lbs. 35 -45GLO-2216 16 9" 6' 0" 1220 lbs. 45 - 55GLO-2218 1-1/8" Sq. 18 9" 6' 9" 1325 lbs. 55 -65GLO-2220 20 9" 7' 6" 1430 lbs. 65 - 75GLO-2222 22 9" 8' 3" 1535 lbs. 75 - 85GHO-2414 14 9" 5' 3" 1275 lbs. 35 -45GHO-2416 16 9" 6' 0" 1380 lbs. 45 - 55GHO-2418 1-1/2" Sq. 18 9" 6' 9" 1485 lbs. 55 -65GHO-2420 20 9" 7' 6" 1590 lbs. 65 - 75GHO-2422 22 9" 8' 3" 1695 lbs. 75 - 85

AMERICAN AG ENTERPRISES LLC--3072 W. JENSEN AVE FRESNO, CA 93706 TELEPHONE:(559) 499-0277 FAX:(559) 499-0278

Due to continuing improvements in the design and manufacture of American Ag products, all specification contained herein are subject to change without notice.

Page 6

AMERICAN AG GLVT GHVT

Here's the reverse vineyard tandem disc that is available in the configuration that fits your need. They're available in widths from 6' 9" to 9' 9".Gang angle can be adjusted from 0 to 24 degree. These machines are available in 1-1/8" & 1-1/2" sq. axles with 22" or 24" blades.

Gangs Independently adjustable front Standard Equipment Center shank, 24" x 3/16" blades, cat 1 & 2 lift pinsand rear,12 deg. - 24 deg.

Frame Tubular main framesGang Axle 1-1/8" sq. or 1-1/2" sq. Optional Equipment 24" x 1/4" blades, drag brackets,

blade scrapers, grease able bearings, dirt shields, cane guard.

Gangs Heavy Duty Structural angle iron.

Model Gang Axle

No. of Blades

Blade Spacing

Width of cut

approx. Weight

H.P. Tractor

GLVT-2416 16 9" 6' 9" 1800 lbs. 55 - 65GLVT-2418 1-1/8" Sq. 18 9" 8' 3" 1910 lbs. 65 - 75GLVT-2420 20 9" 9' 9" 2010 lbs. 75 - 90GHVT-2416 16 9" 6' 9" 2010 lbs. 60 - 75GHVT-2418 1-1/2" Sq. 18 9" 8' 3" 2150 lbs. 80 - 90GHVT-2420 20 9" 9' 9" 2275 lbs. 90 - 100

AMERICAN AG ENTERPRISES LLC--3072 W. JENSEN AVE. FRESNO, CA 93706 TELEPHONE:(559) 499-0277 FAX:(559) 499-0278

Due to continuing improvements in the design and manufacture of American Ag products, all specification contained herein are subject to change without notice.

Page 7

AMERICAN AG GLVT-W GHVT-W

The vineyard tandem wheel disc is available in the configuration that fits your need. They're available in widths from 6' 9" to 9' 9". Gang angle can be adjusted from 0 deg. To 24 deg., these machines are available in 1-1/8" & 1-1/2" sq. axles with 22" or 24" blades. Depth control, Transport Lock, dual wheels, hitch jack and hoses with quick couplers are standard equipment on these discs.

Gangs Independently adjustable front Standard Equipment Depth control, transport lock, single wheels, center shank, hitch jack.

and rear,0 deg. - 24 deg.Frame Tubular main frames.Gang Axle 1-1/8" sq. or 1-1/2" sq.Hitch Spring Cushioned with leveling Optional Equipment 24" x 1/4" blades, Front dirt shields,

Drag brackets, Blade scrapers, grease able bearings, clevis tongue, Rear cane guard, hose kit.

control.

Model Gang Axle

No. of Blades

Blade Spacing

Width of cut

approx. Weight

H.P. Tractor

GLVT-W-2416 16 9" 6' 9" 3475 lbs. 60 - 75GLVT-W-2418 1-1/8" Sq. 18 9" 8' 3" 3550 lbs. 75 - 85GLVT-W-2420 20 9" 9' 9" 3625 lbs. 85 - 100GHVT-W-2416 16 9" 6' 9" 3950 lbs. 60 - 75GHVT-W-2418 1-1/2" Sq. 18 9" 8' 3" 4050 lbs. 75 - 85GHVT-W-2420 20 9" 9' 9" 4150 lbs. 85 - 100

AMERICAN AG ENTERPRISES LLC--3072 W. JENSEN AVE--FRESNO, CA 93706 TELEPHONE:(559) 499-0277 FAX:(559) 499-0278

Due to continuing improvements in the design and manufacture of American Ag products, all specification contained herein are subject to change without notice.

Page 8

AMERICAN AG GMT GMO

SMALL TRACTOR IMPLEMENTS

GMT

Model Size Blades Spacing Approx. Weight

GMT-1812 4' - 0" 12 7-1/4" 615

GMT-1816 5' - 2" 16 7-1/4" 650

GMT-1820 6' - 3" 20 7-1/4" 690

PICTURE COMING SOON

GMO

Model Size Blades Spacing Application

GMO-1814 4' - 0" 14 7-1/4" 475

GMO-1816 5' - 2" 16 7-1/4" 525

GMO-1818 6' - 3" 18 7-1/4" 575

AMERICAN AG ENTERPRISES LLC--3072 W. JENSEN AVE. FRESNO, CA 93706 TELEPHONE:(559) 499-0277 FAX:(559) 499-0278

Due to continuing improvements in the design and manufacture of American Ag products, all specification contained herein are subject to change without notice.

Page 9

AMERICAN AG GOL ORCHARD LEVELER

GOL Orchard leveler for leveling orchard floor for even flood irrigation.

OptionsBerm Scrapers.

Model OVERALL WIDTH LENGTH APPROX. HP APPROX. WT.

GOL-1000 10 ' - 1 1/2" 7' - 3" 50 - 65 1950 lbs.GOL-1100 11 ' - 1 1/2" 7' - 3" 55 - 70 2050 lbs.GOL-1200 12 ' - 1 1/2" 7' - 3" 60 - 75 2150 lbs.GOL-1300 13 ' - 1 1/2" 7' - 3" 65 - 80 2250 lbs.GOL-1400 14 ' - 1 1/2" 7' - 3" 75 - 90 2350 lbs.GOL-1500 15 ' - 1 1/2" 7' - 3" 75 - 95 2500 lbs.GOL-1600 16 ' - 1 1/2" 7' - 3" 80 - 100 2600 lbs.GOL-1700 17 ' - 1 1/2" 7' - 3" 85 - 105 2750 lbs.GOL-1800 18 ' - 1 1/2" 7' - 3" 90 - 110 2850 lbs.

AMERICAN AG ENTERPRISES LLC--3072 W. JENSEN AVE--FRESNO, CA 93706 TELEPHONE:(559) 499-0277 FAX:(559) 499-0278

Due to continuing improvements in the design and manufacture of American Ag products, all specification contained herein are subject to change without notice.

Page 10

AMERICAN AG GOT

Here's the tandem wheel disc that is available in the configuration that fits your need. They're available in widths from 11' 0" to 17' 0".Gang angle can be adjusted from 18 deg. To 24 degree. These machines are available in 1-1/8" & 1-1/2" sq. axles with 22" or 24" blades. Depth control, Transport Lock, dual wheels, hitch jack and hoses with quick couplers are standard equipment on these discs.

Gangs Independently adjustable front Standard Equipment Depth control, transport lock, dual wheels, center shank, hitch jack.and rear,12 deg. - 24 deg.

Frame Tubular main and gang framesGang Axle 1-1/8" sq. or 1-1/2" sq. Optional Equipment 24" x 1/4" blades, drag brackets,

blade scrapers, grease able bearings, clevis tongue,hose kit.

Hitch Spring Cushioned with leveling control

Model Gang Axle

No. of Blades

Blade Spacing

Width of cut

approx. Weight

H.P. Tractor

GOT-L-2428 28 9" 11' 0" 4600 lbs. 60 - 75GOT-L-2432 32 9" 12' 6" 4775 lbs. 75 - 85GOT-L-2436 1-1/8" Sq. 36 9" 14' 0" 4950 lbs. 85 - 95GOT-L-2440 40 9" 15' 6" 5225 lbs. 90 - 100GOT-L-2444 44 9" 17' 0" 5400 lbs. 100-120GOT-H-2428 28 9" 11' 0" 5200 lbs. 60 - 75GOT-H-2432 32 9" 12' 6" 5425 lbs. 75 - 85GOT-H-2436 1-1/2" Sq. 36 9" 14' 0" 5650 lbs. 85 - 95GOT-H-2440 40 9" 15' 6" 5875 lbs. 90-100GOT-H-2444 44 9" 17' 0" 6100 lbs. 100-120

AMERICAN AG ENTERPRISES LLC--3072 W. JENSEN AVE. FRESNO, CA 93706 TELEPHONE:(559) 499-0277 FAX:(559) 499-0278

Due to continuing improvements in the design and manufacture of American Ag products, all specification contained herein are subject to change without notice.

Page 11

AMERICAN AG GR

RIDGERS

GR-1822 ( 2 Blade ) Ridger with 1-1/8" or 1-1/2" SQ. Axle

GR-1833 ( 3 Blade ) Ridger with 1-1/8" or 1-1/2" SQ. Axle

Model Description Approx. Weight

GR-1822 2 BLADE RIDGER WITH 1-1/8" SQ. AXLE 325 lbs.

GR-1833 3 BLADE RIDGER WITH 1-1/8" SQ. AXLE 375 lbs.

GR-1222 2 BLADE RIDGER WITH 1-1/2" SQ. AXLE 350 lbs.

GR-1233 3 BLADE RIDGER WITH 1-1/2" SQ. AXLE 475 lbs.

Note: A - Frame and Tool Bar Shown in Picture are Optional Equipment

AMERICAN AG ENTERPRISES LLC--3072 W. JENSEN AVE. FRESNO, CA 93706 TELEPHONE:(559) 499-0277 FAX:(559) 499-0278

Due to continuing improvements in the design and manufacture of American Ag products, all specification contained herein are subject to change without notice.

Page 12

AMERICAN AG GROT

Here's the reverse tandem wheel disc that is available in the configuration that fits your need. They're available in widths from 11' 0" to 17' 0".Gang angle can be adjusted from 18 deg. To 24 degree. These machines are available in 1-1/8" & 1-1/2" sq. axles with 22" or 24" blades. Depth control, Transport Lock, dual wheels, hitch jack and hoses with quick couplers are standard equipment on these discs.

Gangs Independently adjustable front Standard Equipment Depth control, transport lock, dual wheels, center shank, hitch jack.and rear,12 deg. - 24 deg.

Frame Tubular main and gang framesGang Axle 1-1/8" sq. or 1-1/2" sq. Optional Equipment 24" x 1/4" blades, drag brackets,

blade scrapers, grease able bearings, clevis tongue, hose kit.

Hitch Spring Cushioned with leveling control

Model Gang Axle

No. of Blades

Blade Spacing

Width of cut

approx. Weight

H.P. Tractor

GROT-L-2428 28 9" 11' 0" 4600 lbs. 60 - 75GROT-L-2432 32 9" 12' 6" 4775 lbs. 75 - 85GROT-L-2436 1-1/8" Sq. 36 9" 14' 0" 4950 lbs. 85 - 95GROT-L-2440 40 9" 15' 6" 5225 lbs. 90 - 100GROT-L-2444 44 9" 17' 0" 5400 lbs. 100-120GROT-H-2428 28 9" 11' 0" 5200 lbs. 60 - 75GROT-H-2432 32 9" 12' 6" 5425 lbs. 75 - 85GROT-H-2436 1-1/2" Sq. 36 9" 14' 0" 5650 lbs. 85 - 95GROT-H-2440 40 9" 15' 6" 5875 lbs. 90-100GROT-H-2444 44 9" 17' 0" 6100 lbs. 100-120

AMERICAN AG ENTERPRISES LLC--3072 W. JENSEN AVE--FRESNO, CA 93706 TELEPHONE:(559) 499-0277 FAX:(559) 499-0278

Due to continuing improvements in the design and manufacture of American Ag products, all specification contained herein are subject to change without notice.

Page 13

AMERICAN AG GTO

GTO 3 pt. lift offset disc harrows are built with self-aligning trunion type bearing assemblies. These Disc harrows can be offset to left or right. They are available in widths from 4' 6" to 7' 6". Gang angle can be adjusted from 16 to 24 degree. These machines are available in 1-1/8" sq. gang axles with 22" or 24" blades.

Gangs Independently adjustable rear Standard Equipment Cat 1 or Cat 2 'A' framegang.

Optional Equipment Drag Brackets, Scraper blades, front and rear extension spools.Gang Axle 1-1/8" & 1-1/2"sq. High tensile steel

Model A Frame No. of Blades

Blade Spacing

Width of cut

approx. Weight

H.P. Tractor

GTO-2212 Cat-1 12 9" 4' 6" 840 lbs. 35 -45GTO-2214 Cat-1 14 9" 5' 3" 960 lbs. 45 - 55GTO-2216 Cat-1 16 9" 6' 0" 1080 lbs. 55 -65GTO-2218 Cat-2 18 9" 6' 9" 1200 lbs. 65 - 75GTO-2220 Cat-2 20 9" 7' 6" 1320 lbs. 75 - 85GTO-2412 Cat-1 12 9" 4' 6" 917 lbs. 35 -45GTO-2414 Cat-1 14 9" 5' 3" 1037 lbs. 45 - 55GTO-2416 Cat-1 16 9" 6' 0" 1157 lbs. 55 -65GTO-2418 Cat-2 18 9" 6' 9" 1277 lbs. 65 - 75GTO-2420 Cat-2 20 9" 7' 6" 1397 lbs. 75 - 85

AMERICAN AG ENTERPRISES LLC--3072 W. JENSEN AVE. FRESNO, CA 93706 TELEPHONE:(559) 499-0277 FAX:(559) 499-0278 www.americanagonline.com

Due to continuing improvements in the design and manufacture of American Ag products, all specification contained herein are subject to change without notice.

Page 14

AMERICAN AG GVCC

AMERICAN AG high speed cane cutter is perfect tool for your cane cutting needs. This cane cutter with the blade that operates at above 1000 RPM and 6 MPH tractor speed will cut through the vine growth . The heads are easy to adjust . Width of cut can be easily adjusted with pins.

Extra hydraulic male and female quicker couplers help quick disconnect of the unit from the tractor for storage.

The heads are adjustable. They can be raised and lowered. They can be adjusted quickly with pins for different width of rows.

Model Size Description ApplicationGVCC-100 _ Vineyard cane cutter 10 ft. or 12 ft. Rows

AMERICAN AG ENTERPRISES LLC--3072 W. JENSEN AVE. FRESNO, CA 93706 TELEPHONE:(559) 499-0277 FAX:(559) 499-0278

Due to continuing improvements in the design and manufacture of American Ag products, all specification contained herein are subject to change without notice.

Page 15

AMERICAN AG GVR VINEYARD

RIPPER

3 pt. VINEYARD RIPPER Model: GVR-3 / 5 Shatter soils for better water penetration and increase soil aeration.

Standard Features Options8" X 4" X 3/8" Structural tubing. Ring Roller Mounting Bracket1 " Shank Material. Gauge WheelsChrome Wear Shins Parabolic ShankStandard ShankParking Stand

Model Shanks Shank Size Frame Width

Hitch Category

approx. Weight

GVR-327 3 1 X 27" 73 1 & 2 1005 lbs.GVR-330 1 X 30" 73 2 1040 lbs.

GVR-527 5 1 X 27" 95 2 1405 lbs.GVR-530 1 X 30" 95 2 1445 lbs.

AMERICAN AG ENTERPRISES LLC--3072 W. JENSEN AVE--FRESNO, CA 93706 TELEPHONE:(559) 499-0277 FAX:(559) 499-0278

Due to continuing improvements in the design and manufacture of American Ag products, all specification contained herein are subject to change without notice.

Page 16

AMERICAN AG GVT GHT

TERRACERS

GVT

Model Size Description Application

GVT-608 6' 8" V - TERRACER 10 ft. Rows

GVT-706 7' 6" V - TERRACER 12 ft. Rows

GHT

Model Size Description Application

GHT-608 6' 8" HYDRAULIC TERRACER 10 ft. Rows

GHT-800 8' 0" HYDRAULIC TERRACER 12 ft. Rows

AMERICAN AG ENTERPRISES LLC--3072 W. JENSEN AVE. FRESNO, CA 93706 TELEPHONE:(559) 499-0277 FAX:(559) 499-0278

Due to continuing improvements in the design and manufacture of American Ag products, all specification contained herein are subject to change without notice.

Page 17

AMERICAN AG GRR

RING ROLLER

GRIZZLY RING ROLLER is designed to work in conjunction with many other farm implements for vineyard, orchard and open land farming. It helps save time and money when pulled behind a disc or plow. Cultipacker Rings are engineered to till the soil in one direction and pack in the opposite direction.

Note: Available in widths from 2' to 24'. All units are measured in working widths. A 7 ft. unit measures7' 0" in working width and 7' 8" in overall width

OPTIONAL EQUIPMENT

FLOATHYDRAULIC WHEEL KITS

PACKING >>> TILLING >>>

AMERICAN AG ENTERPRISES LLC--3072 W. JENSEN AVE. FRESNO, CA 93706 TELEPHONE:(559) 499-0277 FAX:(559) 499-0278

Due to continuing improvements in the design and manufacture of American Ag products, all specification contained herein are subject to change without notice. Page 18

AMERICAN AG GSC

Spring Cultivator

GSC

Model Size Description Approx. HP

GSC-600 6 FT. SPRING CULTIVATOR 975 LBS. 55 - 65

GSC-700 7 FT. SPRING CULTIVATOR 1100 LBS. 65 - 75

GSC-800 8 FT. SPRING CULTIVATOR 1245 LBS. 75 - 85

GSC-1000 10 FT. SPRING CULTIVATOR 1515 LBS. 85 - 95

GSC-1200 12 FT. SPRING CULTIVATOR 1785 LBS. 95 - 105

GSC-1400 14 FT. SPRING CULTIVATOR 2055 LBS. 105 - 115

AMERICAN AG ENTERPRISES LLC--3072 W. JENSEN AVE. FRESNO, CA 93706 TELEPHONE:(559) 499-0277 FAX:(559) 499-0278

Due to continuing improvements in the design and manufacture of American Ag products, all specification contained herein are subject to change without notice.

Page 19

AMERICAN AG GNT

NARROW VINEYARD TANDEMHere's the Narrow vineyard tandem disc that is available in the configuration that fits your need. They're available in widths from 4' 0" to 7' 0".Gang angle can be adjusted from 0 to 24 degree. These machines are available in 1-1/8" & 1-1/2" sq. axles with 20" , 22" or 24" blades.

Gangs Independently adjustable front Standard Equipment Center shank, 24" x 3/16" blades, cat 1 & 2 A frameand rear,12 deg. - 24 deg.

Frame Tubular main framesGang Axle 1-1/8" sq. or 1-1/2" sq. Optional Equipment 20" , 22" blades, drag brackets,

blade scrapers, grease able bearings, dirt shields, vine guard.

Gangs Heavy Duty Structural angle iron.

Model Gang Axle

No. of Blades

Blade Spacing

Width of cut

approx. Weight

H.P. Tractor

GNT-2408-L 8 9" 4' 0" 1200 lbs. 45 - 55GNT-2410-L 1-1/8" Sq. 10 9" 5' 6" 1300 lbs. 55 - 65GNT-2412-L 12 9" 7' 0" 1600 lbs. 65 - 75GNT-2408-H 8 9" 4' 0" 1300 lbs. 45 - 55GNT-2410-H 1-1/2" Sq. 10 9" 5' 6" 1400 lbs. 55 - 65GNT-2412-H 12 9" 7' 0" 1700 lbs. 65 - 75

AMERICAN AG ENTERPRISES LLC--3072 W. JENSEN AVE. FRESNO, CA 93706 TELEPHONE:(559) 499-0277 FAX:(559) 499-0278

Due to continuing improvements in the design and manufacture of American Ag products, all specification contained herein are subject to change without notice.

Page 20

AMERICAN AG GBP

3 PT. ORCHARD BRUSH PUSHER

Model Description Approx. Weight

GBP-1000 10 FT. BRUSH PUSHER 825 LBS.

Note: Mounting Shank and Twist Head Shown in Picture are Optional Equipment

AMERICAN AG ENTERPRISES LLC--3072 W. JENSEN AVE. FRESNO, CA 93706 TELEPHONE:(559) 499-0277 FAX:(559) 499-0278

Due to continuing improvements in the design and manufacture of American Ag products, all specification contained herein are subject to change without notice.

Page 21

AMERICAN AGGCP

VINEYARD CHISEL PLOW

3 pt. CHISEL PLOW Model: GCP Shatter,s soils for better water penetration and increase soil aeration.

(Shown with optional extensions)

Model Shanks Shank Size Description WT.GCP-4 5 shank 1" x 2" 4 Ft. Chisel Plow 413 lbs.

GCP-5 5 shank 1" x 2" 5 Ft. Chisel Plow 438 lbs.

GCP-6 6 shank 1" x 2" 6 Ft. Chisel Plow 463 lbs.

GCP-7 7 shank 1" x 2" 7 Ft. Chisel Plow 520 lbs.

GCP-8 8 shank 1" x 2" 8 Ft. Chisel Plow 545 lbs.

GCP-4x 5 shank 3/4" x 2" & 1" x 2" 4 Ft. Chisel Plow 508 lbs.

GCP-5x 5 shank 3/4" x 2" & 1" x 2" 11 Ft. Chisel Plow 533 lbs.

GCP-6x 6 shank 3/4" x 2" & 1" x 2" 12 Ft. Chisel Plow 558 lbs.

GCP-7x 7 shank 3/4" x 2" & 1" x 2" 13 Ft. Chisel Plow 647 lbs.

GCP-8x 8 shank 3/4" x 2" & 1" x 2" 14 Ft. Chisel Plow 672 lbs.

Option Shanks Shank Size Description WT.GCP-1 EX 1 Pair shank 1" x 2" 1 Ft. Extension 178

GCP-2 EX 2 Pair shank 3/4" x 2" & 1" x 2" 1 Ft. Extension 216

GCP-UH Utility Hitch 35

Note: Need 12 to 16 HP per shank at 15" deepAMERICAN AG ENTERPRISES LLC--3072 W. JENSEN AVE--FRESNO, CA 93706

TELEPHONE:(559) 499-0277 FAX:(559) 499-0278Due to continuing improvements in the design and manufacture of American Ag products, all specification contained herein are subject to change without notice.

Page 22

AMERICAN AG GQHT

GRIZZLY QUICK HITCH TANDEM disc that is available in the configuration that fits your need. They're available in widths from 6' 9" to 9' 9".Gang angle can be adjusted from 0 to 24 degree. These machines are available in 1-1/2" sq. axles with 24" X 1/4" blades.

(Shown with optional Cleaner set & Drag Brackets )

Gangs Independently adjustable front Standard Equipment Center shank,cat 2 QUICK HITCH lift pinsand rear,12 deg. - 24 deg.

Frame Tubular main framesAxle 1-1/2" sq. Optional Equipment Cleaner Blade SetGangs Heavy Duty Structural angle iron. Drag Brackets

Model Gang Axle

No. of Blades

Blade Spacing

Width of cut

approx. Weight

H.P. Tractor

GQHT-2416 16 9" 6' 9" 2210 lbs. 60 - 75

GQHT-2418 1-1/2" Sq. 18 9" 8' 3" 2350 lbs. 80 - 90

GQHT-2420 20 9" 9' 9" 2475 lbs. 90 - 100

AMERICAN AG ENTERPRISES LLC--3072 W. JENSEN AVE. FRESNO, CA 93706 TELEPHONE:(559) 499-0277 FAX:(559) 499-0278

Due to continuing improvements in the design and manufacture of American Ag products, all specification contained herein are subject to change without notice.

Page 23