Thin-film, intumescent

fire protective paint for

wood, sheet rock, and

other interior substrates

Attractive water-based

architectural finish

rated for up to two

hours fire protection

Complies with all

building codes for use

in new construction,

historic restoration,

defective construction,

and many other

applications.

Fanueil Hall, Boston, MA

FP

Introducing Albi Clad FP - the Decorative Interior Finish withSuperior Fireproofing Protection

Our Albi Clad TF thin-film intumescent fireproofing for interior

structural steel has gained high marks from architects, construction

professionals and fire-safety officials all over the world. Now Albi Clad FP

gives you the same fireproofing protection - but can be applied to other

interior surfaces. Wood, wallboard, or virtually any kind of surface can now

be coated with Albi Clad FP to get an attractive interior finish with superior

fire resistant protection.

Albi Clad FP is the latest in a long line of innovative products fromAlbi - the first name in fireproofing materials for over five decades. Unlikeordinary fireproofing, Albi Clad FP is applied at minimum thickness for a smooth architectural finish. Light weight and ultra thin, Albi Clad FP givesyou long-term protection, outstanding hardness and incomparable durability.

Albi Clad FP is ideal for renovating historical buildings. Not only doesits attractive finish help maintain and retain the historic character of olderbuildings that make available tax credits, it provides uncompromising fire safetyas well.

Historic restorationprepared for primingbefore Albi Clad FPapplication

An attractive interior finish thatconforms to building codes andinsurance requirements for fireproofing

Maintains contour of thesubstrate, and preserves details

Architectural, decorative finish

Ideal for both new constructionand historic renovations

Complies with all VOC air qualitystandards

UL tested for resistance to highhumidity, aging, industrialatmosphere (CO2/SO2), and washing

ALBI CLAD FP ADVANTAGES

PROVEN PERFORMANCE

HISTORIC RENOVATIONS, RESTORATIONS OR PRESERVATION

Albi clad FP is applied directly from the shipping container using standard orairless spray equipment. Fire resistance specifications determine the thicknessof the coating. Contact Albi for specific application parameters.

ConstructionRough Cut 2x10Floor Joist Assembly

Rough Cut 2x10Floor Joist Assembly finished with tin ceiling panels

2x4 Wall Assembly with 5/8” Type X Gypsum on both sides

Fire Test Report #

WFCi Report # 04042 (A)

WFCi Report # 04042 (B)

WFCI Report # 04042 (D)

Film Thickness

40 mils

40 mils

60 mils

Fire Resistance Rating

1 Hour (ASTM E-119)

1 Hour (ASTM E-119)

1.5 Hours (ASTM E-119)

Albi Clad FP provides theultimate fire protection with

a pleasing architectural finish.

EASY TO APPLY

PERFORMANCE RESULTS FIRE TEST E-119

DEFECTIVE GYPSUM BOARD FIRE SEPERATION WALLCONSTRUCTION

GWB incorrectly attached

GWB installed horizontally

Non-staggered joints

Joints on both sides aligned

GWB applied to 1 side of demising wall only

ALBI CLAD APPLICATIONS

Fire Separation Walls and Ceilings

Nursing Homes

Warehouses

New Wood Construction

School Buildings

Condominiums and Apartments

Historic Renovations

Loft Conversions

Defective Construction

Architectural Tin Ceilings

), and washing

AGES

PHYSICAL PROPERTIES

Albi Clad FP Long Form Guide SpecificationAlbi Clad FP Field Application Manual

Albi Clad 800Exterior grade intumescentfireproofing, withstandssevere weathering and abuse

Albi DriCladLow-cost, uniformdensity mineral boardthat installs dry year-round

Albi Clad TFWater based, thin-filmintumescent fireproofing forexposed interior structuralsteel

Other Albi FP Literature

Also inquire about thesefireproofing productsfrom Albi.

Made in the USA

ALBI PROTECTIVE COATINGS

For more than fifty years, Albi fireproofing materials have demonstrated superiorperformance and reliability under a range of extreme environments worldwide. Theseproprietary formulations also meet global building codes and insurance requirements.Lightweight Albi materials provide long-term protection, outstanding durability,aesthetic properties and are completely free from asbestos.

Albi Protective Coatings, Division of StanChem, Inc.

401 Berlin Street, East Berlin, Connecticut 06023 U.S.A.

Tel: (860) 828-0571 Fax: (860) 828-3297

www.albi.com info@albi.com

PROPERTY

Dry Applied Density

Hardness

Compressive Strength

Cohesive/Adhesion Strength

Abrasion Resistance

Impact Resistance

Weight per Gallon

% Solids by weight

Flame Spread

Smoke Developed

VALUE

85 PCF

40-45

300 psi

190 psi (cohesive failure)

.3 grams loss

85 in/lbs.

11.5 ± 0.20 lbs./gals

72% ± 2.0%

2 - Class A

5 - Class A

TEST METHOD

ASTM D2240

ASTM D695

ASTM D4541

ASTM D4060

ASTM D2794

ASTM E84

ASTM E84