INSULATING TUBES AND STICKS

INSULATING TUBES AND STICKS

■ Why a quality tube IEC 60855-1?

• Guarantee of absolute safety against electrical hazard

High insulating power no matter the environment of use origin ( interface foam / fiberglass / resin )

• Guarantee of the mechanical strength

• Guarantee of the performance over time

No alteration of the dielectric and mechanical properties High performance varnish(UV)

INSULATING TUBES AND STICKS

■ The foam-cored insulating tube IEC 60855-1

Uniform PU closed-cell foam(waterproof)

Foam-resin-fiberglass interface

Filling the open cells on the surface of the foam

3 longitudinal layers of fiberglass100% of the resistance operated in

flexion

2 transversal layers of fiberglass 100% of its strength operated in torsion

and compression

INSULATING TUBES AND STICKS

■ The foam-cored insulating tubes (foam filled)

What they show you What is hidden

INSULATING TUBES AND STICKS

■ CONCLUSION

FAMECA manufactures its foam-cored tube differently from its competitors :

The tube is manufactured directly around a sealed, rigid core of polyurethane foam instead of filling their tube with foam after the tube has been made

ASK FOR FAMECA IEC 60855-1 QUALITY

INSULATING TUBES AND STICKS

■ Our solution since 1996

• The IEC 60855-1 standard for foam-cored insulating tubes and insulating tubes manufactured in synthetic materials intended for live working tools and materials ( U>1 kV)

• Applied to all our insulating sticks