FalSe CeIlInGS IndUSTRy BUIldInG PROFIleS and …€¦ · METALSCREEN® METALSCREEN® S.p.A. - Via...
Transcript of FalSe CeIlInGS IndUSTRy BUIldInG PROFIleS and …€¦ · METALSCREEN® METALSCREEN® S.p.A. - Via...
METALSCREEN®
1METALSCREEN® S.p.A. - Via Aldo Moro, 38 - 41030 Bomporto (MO) - Italy EU - Tel. +39 059/8170611 - Fax +39 059/8170633e-mail: [email protected] - www.metalscreen.it
All the designs, photos, logo and symbols, messagges and models of this catalogue is own property, of Metalscreen spa Modena - Italy the international laws covers and protects everythings
41030 BOMPORTO MOdena- ITaly eU Via A. Moro, 38Tel. +39 059/8170611Fax +39 059/8170633Fax +39 059/8170632 [email protected]
METAL FALSE CEILINGS INDUSTRIES
FalSe CeIlInGS IndUSTRyBUIldInG PROFIleS and SUSPenSIOn SySTeMS FaCTORy
2
METALSCREEN®
METALSCREEN® S.p.A. - Via Aldo Moro, 38 - 41030 Bomporto (MO) - Italy EU - Tel. +39 059/8170611 - Fax +39 059/8170633e-mail: [email protected] - www.metalscreen.it
All the designs, photos, logo and symbols, messagges and models of this catalogue is own property, of Metalscreen spa Modena - Italy the international laws covers and protects everythings
The quality starts from the best raw materials
METALSCREEN®
3METALSCREEN® S.p.A. - Via Aldo Moro, 38 - 41030 Bomporto (MO) - Italy EU - Tel. +39 059/8170611 - Fax +39 059/8170633e-mail: [email protected] - www.metalscreen.it
All the designs, photos, logo and symbols, messagges and models of this catalogue is own property, of Metalscreen spa Modena - Italy the international laws covers and protects everythings
eUROPean TeSTInG CeRTIFICaTIOn ORIGInal EN 13964:2004 - EN 14195:2005
Quality Management System Operated UNI EN ISO 9001:2000
…A thought:It Is tIme to replace your old glass mIneral fIbre ceIlIng panellIng, wIth Its health rIsks and dIrt, Its panels that you can’t wash and
that have become a breedIng ground for all kInds of bacterIa, and Its warped and
ugly appearance. leave the exIstIng bearIng structure and sImply Insert new boxer panels, whIch are supported by your exIstIng grId. the whole room wIll take on a new lIght, you wIll
be helpIng everyone In the workplace.
ALUMINIUM FALSE CEILINGSADVANTAGES FOR EVERYBODY
Weight
The lightness of aluminium (its weight is 60% of steel) allows fast and easy installations. Easy to place and to stock.
Fire reaction class “0” - Euroclass A1Aluminium does not react to fire or produce dangerous
gaseous emissions for steel and for aluminium. Class “O”. D.M. dt 26.06.84 (S.O.G.U. n° 234 dt 25.08.84)
D.M. dt 14.01.85 (G.U. n° 16 dt 19.01.85)Fire reaction means: life.
AestheticPolyester painting allows a wide range of colours; different
solutions, such as strips and panels, can be provided.
Colour RangeMetalscreen products are available in a broad range of colours. Corrosion resistant, dirt repellent, extremely durable and avoids
the products yellowing.
WashableAluminium ceilings can be easily washed assuring the complete
removal of dust and bacteria. Germproof - Aseptic.
Maintenance costCeilings are produced in modules so that only the damaged parts
can be substituted. Easy to Cut - Easy to mould - Long lasting.
Acoustic absorbtionAluminium can be coupled with different materials in order
to obtain an excellent acoustic absorbtion. Stop fiberglass - Stop mineral fiber - Stop gypsum board -
Stop pollutions on the air.
Corrosion resistanceHas excellent corrosion resistance provided by the paints
and the specific chemical properties of aluminium. Still life warrantee - Corrosion proof.
Official test certification nr 7/DC/RUB/09 of 11/06/2009.
HumidityAluminium ceilings do not absorb nor produce humidity,
allowing you to live, work, and study in healthy environment. Healty - Don’t release pollution into the air.
RecyclingAluminium is 100% recyclabe. Recycled aluminium
maintains the same mechanical properties as primary aluminium. Effort the future world.
Chrome-freeThe production process is environmental friendly and uses
totally Chrome-free pretreatment. No asbestos - No mineral fibers.
Freight chargesReduced cost of transport - Light weight less incidence of freight
charges respect any other kind of false ceilings in the market.
THE ALUMINIUM FALSE CEILINGIT IS NOT DANGEROUS FOR YOUR HEALTH
al• •
ALUM
INIUM IS RECYLABE
ALUMINIUM IS RECYLAB
E
NO ASBESTOS
PROVEN APPLICATIONS:•ADMINISTRATIVEOFFICESANDINDUSTRIALBUILDINGS•BANKS,SALESOFFICES,SHOWROOMS,DEPARTMENT
STORES, CHURCHES, MOSQUES, TEMPLES, RESTAURANTS AND COFFE SHOPS
•SCHOOLS,HOSPITALS,AIRPORTS,HOTELS,FOODSTORES
•THEALUMINIUMCEILINGISNOTDANGEROUSFORYOUR HEALTH
•NOPOLLUTIONONTHEAIR
4
METALSCREEN®
METALSCREEN® S.p.A. - Via Aldo Moro, 38 - 41030 Bomporto (MO) - Italy EU - Tel. +39 059/8170611 - Fax +39 059/8170633e-mail: [email protected] - www.metalscreen.it
All the designs, photos, logo and symbols, messagges and models of this catalogue is own property, of Metalscreen spa Modena - Italy the international laws covers and protects everythings
5METALSCREEN® S.p.A. - Via Aldo Moro, 38 - 41030 Bomporto (MO) - Italy EU - Tel. +39 059/8170611 - Fax +39 059/8170633e-mail: [email protected] - www.metalscreen.it
All the designs, photos, logo and symbols, messagges and models of this catalogue is own property, of Metalscreen spa Modena - Italy the international laws covers and protects everythings
P
AN
EL
SSUSPENDED FALSE CEILINGSALUMINIUM AND METAL PANELS
FALSE CEILINGS INDUSTRYBUILDING PROFILES ANDSUSPENSION SYSTEMS FACTORY
66METALSCREEN® S.p.A. - Via Aldo Moro, 38 - 41030 Bomporto (MO) - Italy EU - Tel. +39 059/8170611 - Fax +39 059/8170633
e-mail: [email protected] - www.metalscreen.itAll the designs, photos, logo and symbols, messagges and models of this catalogue is own property, of Metalscreen spa Modena - Italy the international laws covers and protects everythings
CLIP-IN
CEILINGSPANELSmm.600x600WITHSHADOWJOINTGAPCLIP-INCONCEALEDSYSTEM
INSTALLATION GUIDELINE:
The panels are suspended from a spring tee renforced profile and simply clipped into place. The spring tee renforced profiles must keep a distance of approximately 600 mm. between. The suspension is created by a collection of hangers which, by means of adjustable clips. The different profiles manufactured for this model. Allow the consultant to choose from a variety of surrounding finishes. Each single panel can easily be removed, making inspections possible and full access to the ceiling cavity without it being necessary to remove the entire ceiling system already installed.
WASHABLE • DUSTPROOF • RESISTANT TO DAMPNESS AND ATMOSPHERIC ELEMENTS • CORROSIONPROOF
SCRATCH PROOF
SIMPLE SYSTEM CONCEALED PROFILES
SPRING TEE RUNNERTYPE 08
METAL BRACKETTYPE 09/B
PANEL
AVAILABLE ALSO IN PREPAINTED
STEEL THICKNESS MM 0,5
THECNICAL SPECIFICATIONS: “ ” CLIP-INFalse suspended ceilings system composed of: prepainted aluminium corrosionproof and washable type METALSCREEN “ ” clip-in concealed with shadow joint gap all around the panel, mm. 600x600 thickness mm. 0,5–0,6-0,7, microperforated diagonal holes Ø mm. 2 – Ø mm. 3 total surface, with mm. 25 plain renforced surface all around the border’s panel or central surface mm. 400x400 with mm. 100 plain renforced surface all around the border’s panel (the colour, the thickness and the perforations will be choose by the consultants).Its complete of acoustic “TNT” textile non woven black fabric thermal applied on the back of each panel.The “ ” clip-in panels, must be installed on “DOUBLE CONCEALED SUSPENSION SYSTEM” composed of: primary supporting runner type U2 hot dipped galvanized steel thickness mm. 0,6 across with the galvanized hot dipped spring tee renforced runner type 08 to clip the “ ” panel with a simple soft pressure and metal union snaps type 35 to obtain a perfect shadow joint gap.The “DOUBLE CONCEALED SUSPENSION SYSTEM” its composed without use other kind of parts without screws, bracket or make holes.It is only suspended with hanging rigid wire Ø mm. 4 with metal adjustment double snap type 23/D, perimetrical wall angles “L” section mm. 24x24 with connector joint prepainted aluminium of same colour of the “ ” panels.AVAILABLE ALSO IN PREPAINTED THERMOSETTING STEEL THICKNESS mm. 0,5
CLIP-IN
CEILINGSPANELSMM600x600WITHSHADOWJOINTGAPCLIP-INCONCEALEDSYSTEM
NUOVONEW
PLAIN
PERFORATEDTOTAL SURFACEHoles Ø mm. 3 - 10%Plain border mm. 25
PERFORATED CENTRAL SURFACE(mm. 400x400)Holes Ø mm. 3 - 5%Plain border mm. 100
MICRO- PERFORATED CENTRAL SURFACE(mm. 400x400)Holes Ø mm. 2 - 10%Plain border mm. 100
MICRO- PERFORATEDTOTAL SURFACEHoles Ø mm. 2 - 20%Plain border mm. 25
SHADOW JOINT GAP SHADOW JOINT GAP
7METALSCREEN® S.p.A. - Via Aldo Moro, 38 - 41030 Bomporto (MO) - Italy EU - Tel. +39 059/8170611 - Fax +39 059/8170633e-mail: [email protected] - www.metalscreen.it
All the designs, photos, logo and symbols, messagges and models of this catalogue is own property, of Metalscreen spa Modena - Italy the international laws covers and protects everythings
CLIP-IN
TECHNICAL INSTRUCTIONS TO INSTALL THE CONCEALED SYSTEM
TYPE 08
TYPE 09/B
TYPE 08SPRING TEE RUNNER STEEL GALVANIZED LENGHT MM 4000 RENFORCED TORSIONPROOF
TYPE G8JOINT COUPLING FOR SPRING TEE TYPE 08
TYPE U2 MAIN SUPPORTING RUNNER
TYPE 35 UNION ROYALMETAL SNAP
TYPE “08”CONCEALED SPRING TEE
RUNNER GALVANIZED STEEL LENGHT MM 4000
TYPE “U2”PRIMARY SUSPENSION
CARRIER STEEL GALVANIZED LENGHT MM 4000
• PERFECT STABILITY AND PLANARITY OF THE FALSE CEILINGS SYSTEM - SAFETY
• TORSION PROOF - HEAVY WEIGHTS• SUSPENSION HANGERS AT mm. 1200
INSTALLATION “DOUBLE SYSTEM” FOR PANELS CONCEALED CLIP-IN
DETAILS OF THE SHADOW JOINT GAP WITH THE CLIP SYSTEM AROUND THE PANEL
Torsion proofrenforced
NUOVO
NEW
NUOVO
NEW
ART. 09/Bmetal bracket adjustement runner for type 08
NUOVONEW
NUOVONEW
SHADOW JOINT GAP
PLAIN BORDERmm. 100
P
AN
EL
S
88METALSCREEN® S.p.A. - Via Aldo Moro, 38 - 41030 Bomporto (MO) - Italy EU - Tel. +39 059/8170611 - Fax +39 059/8170633
e-mail: [email protected] - www.metalscreen.itAll the designs, photos, logo and symbols, messagges and models of this catalogue is own property, of Metalscreen spa Modena - Italy the international laws covers and protects everythings
“TNT” ACOUSTIC SOUND PROOFINGNONVOWENFIBRE FABRIC”TNT” is a new microfibre with non-vitreous fabric warping which METALSCREEN applies to the back of every single panel and strip in the ceiling panelling system using a computerised apparatus with a thermal monitoring function.“TNT” has extremely powerful noise absorption properties, does not release noxioius fibres into the air and does not alter or decompose over time.“TNT” is supplied already affixed to the panel, preventing additional installation, carriage and storage costs which usually apply to the supply of insulating materials.METALSCREEN ceiling panelling with “TNT” and its thermal adhesive backing guarantee the presence of an insulating material even after inspections, maintenance and repositioning of each individual panel in the ceiling panelling.
“TNT” ACOUSTICAL NON WOVEN TEXTILE
CLIP-INNUOVONEW
SHADOW JOINT GAP
9METALSCREEN® S.p.A. - Via Aldo Moro, 38 - 41030 Bomporto (MO) - Italy EU - Tel. +39 059/8170611 - Fax +39 059/8170633e-mail: [email protected] - www.metalscreen.it
All the designs, photos, logo and symbols, messagges and models of this catalogue is own property, of Metalscreen spa Modena - Italy the international laws covers and protects everythings
CEILINGSPANELSmm.600x600WITHSHADOWJOINTGAPCLIP-INCONCEALEDSYSTEM
CLIP-INNUOVONEW
P
AN
EL
S
1010METALSCREEN® S.p.A. - Via Aldo Moro, 38 - 41030 Bomporto (MO) - Italy EU - Tel. +39 059/8170611 - Fax +39 059/8170633
e-mail: [email protected] - www.metalscreen.itAll the designs, photos, logo and symbols, messagges and models of this catalogue is own property, of Metalscreen spa Modena - Italy the international laws covers and protects everythings
Q6060® CLIP-IN
CONCEALED CLIP-IN PANELS PANELS Q6060
INSTALLATION INSTRUCTIONS:
The panels are suspended from a spring tee renforced profile and simply clipped into place. The spring tee renforced profiles must keep a distance of approximately 600 mm. between. The suspension is created by a collection of hangers which, by means of adjustable clips. The different profiles manufactured for this model. Allow the con-sultant to choose from a variety of surrounding finishes. Each single panel can easily be removed, making inspections possible and full access to the ceiling cavity without it being necessary to remove the entire ceiling system already installed.
WASHABLE • DUST-PROOF • RESISTANT TO DAMPNESS AND ATMOSPHERIC ELEMENTS • CORROSION PROOF
SCRATCH PROOF
SIMPLESYSTEM CONCEALED PROFILES
SPRING TEE RUNNER TYPE 08
METAL BRACKET TYPE 09/B
PANEL
AVAILABLE ALSO IN PREPAINTED
STEEL THICKNESS MM. 0,5
Q6060® CLIP-IN
CONCEALED CLIP-IN PANELS PANELS Q6060
BEVELLED CLOSED JOINT
TECHNICAL SPECIFICATION: “Q6060” CLIP-INFalse suspended ceilings system composed of: prepainted aluminium corrosionproof and washable type METALSCREEN “Q6060” clip-in concealed with bevelled closed joints, mm. 600x600 thickness mm. 0,5–0,6-0,7, microperforated diagonal holes Ø mm. 2 – Ø mm. 3 total surface, with mm. 25 plain renforced surface all around the border’s panel or central surface mm. 400x400 with mm. 100 plain renforced surface all around the border’s panel (the colour, the thickness and the perforations will be choose by the consultants).Its complete of acoustic “TNT” textile non woven black fabric thermal applied on the back of each panel.The “Q6060” clip-in panels, must be installed on “DOUBLE CONCEALED SUSPENSION SYSTEM” composed of: primary supporting runner type U2 hot dipped galvanized steel thickness mm. 0,6 across with the galvanized hot dipped spring tee renforced runner type 08 to clip the “Q6060” panel with a simple soft pressure and metal union snaps type 35 to obtain a perfect shadow joint gap.The “DOUBLE CONCEALED SUSPENSION SYSTEM” its composed without use other kind of parts without screws, bracket or make holes.It is only suspended with hanging rigid wire Ø mm. 4 with metal adjustment double snap type 23/D, perimetrical wall angles “L” section mm. 24x24 with connector joint prepainted aluminium of same colour of the “Q6060” panels.AVAILABLE ALSO IN PREPAINTED THERMOSETTING STEEL THICKNESS mm. 0,5
PLAIN
PERFORATEDTOTAL SURFACEHoles Ø mm. 3 - 10%Plain border mm. 25
PERFORATED CENTRAL SURFACE(mm. 400x400)Holes Ø mm. 3 - 5%Plain border mm. 100
MICRO- PERFORATED CENTRAL SURFACE(mm. 400x400)Holes Ø mm. 2 - 10%Plain border mm. 100
MICRO- PERFORATEDTOTAL SURFACEHoles Ø mm. 2 - 20%Plain border mm. 25
11METALSCREEN® S.p.A. - Via Aldo Moro, 38 - 41030 Bomporto (MO) - Italy EU - Tel. +39 059/8170611 - Fax +39 059/8170633e-mail: [email protected] - www.metalscreen.it
All the designs, photos, logo and symbols, messagges and models of this catalogue is own property, of Metalscreen spa Modena - Italy the international laws covers and protects everythings
Q6060® CLIP-IN
TECHNICAL INSTRUCTIONS TO INSTALL THE CONCEALED SYSTEM
TYPE 08
TYPE 09/B
TYPE 08SPRING TEE RUNNER STEEL GALVANIZED LENGHT MM 4000 RENFORCED TORSIONPROOF
TYPE U2 MAIN SUPPORTING RUNNER
TYPE 35UNION ROYAL METAL SNAP
TYPE “08”CONCEALED SPRING TEE
RUNNER GALVANIZED STEEL LENGHT mm. 4000
TYPE “U2”PRIMARY SUSPENSION
CARRIER STEEL GALVANIZED LENGHT mm. 4000
• PERFECT STABILITY AND PLANARITY OF THE FALSE CEILINGS SYSTEM - SAFETY
• TORSION PROOF - HEAVY WEIGHTS• QUICK INSTALLATION• SUSPENSION HANGERS AT mm. 1200
INSTALLATION “DOUBLE SYSTEM” FOR PANELS Q6060 CONCEALED CLIP-IN
BEVELLED EDGESTorsion proofrenforced
NUOVO
NEW
NUOVO
NEW
TYPE 09/Badjustement runner metal bracket
NUOVONEW
TYPE G8JOINT COUPLING FOR SPRING TEE TYPE 08
P
AN
EL
S
12
METALSCREEN®
METALSCREEN® S.p.A. - Via Aldo Moro, 38 - 41030 Bomporto (MO) - Italy EU - Tel. +39 059/8170611 - Fax +39 059/8170633e-mail: [email protected] - www.metalscreen.it
All the designs, photos, logo and symbols, messagges and models of this catalogue is own property, of Metalscreen spa Modena - Italy the international laws covers and protects everythings
ACCESSORIES FOR PANELS
Q6060® -
CONCEALED CLIP-IN “SIMPLE SYSTEM”
TYPE 09/Badjustement runner metal bracket
TYPE 35UNION ROYAL METAL SNAP
TYPE G8METAL JOINT COUPLING
FOR SPRING TEE TYPE 08
TYPE 08SPRING TEE RUNNER RENFORCED TORSIONPROOF STEEL
GALVANIZED LENGTH MM. 4000
ACCESSORIES FOR PANELS
Q6060® -
CONCEALED CLIP-IN “DOUBLE SYSTEM”
TYPE 35UNION ROYAL METAL SNAP
TYPE U2MAIN SUPPORTING RUNNER LENGTH MM. 4000
TYPE G8METAL JOINT
COUPLING FOR SPRING TEE
TYPE 08
TYPE 08SPRING TEE RUNNER RENFORCED TORSIONPROOF STEEL GALVANIZED LENGTH MM. 4000
13METALSCREEN® S.p.A. - Via Aldo Moro, 38 - 41030 Bomporto (MO) - Italy EU - Tel. +39 059/8170611 - Fax +39 059/8170633e-mail: [email protected] - www.metalscreen.it
All the designs, photos, logo and symbols, messagges and models of this catalogue is own property, of Metalscreen spa Modena - Italy the international laws covers and protects everythings
BOXER® VT-24 DEEP LAY-IN PANELS DEEP mm. 35 ON SUSPENSION T-BAR mm. 24 GRID
TOTAL FULL INSPECTION
METALSCREEN®
NUOVONEWNUOVO
NEW
1414METALSCREEN® S.p.A. - Via Aldo Moro, 38 - 41030 Bomporto (MO) - Italy EU - Tel. +39 059/8170611 - Fax +39 059/8170633
e-mail: [email protected] - www.metalscreen.itAll the designs, photos, logo and symbols, messagges and models of this catalogue is own property, of Metalscreen spa Modena - Italy the international laws covers and protects everythings
BOXER® LAY-IN
BOXER®
VT-9 TEGULAR“METALSCREEN BOXER VT-9 TEGULAR” 0,5-0,6-0,7 mm. thick, prepainted aluminium ceiling recessed panels dimension mm. 595x595xH9 with oblique bevelled edges and height: 9 mm. (the colour and the exact thickness will be chosen by the consultants).The “BOXER VT-9 TEGULAR” panel individually demountable and the panels will be mounted lay-in visible “T” bar grid structure type “TWIN LOCK”. 600x600 mm. modular structure is composed of hot dipped galvanized steel “T” bar profiles with prepainted aluminium corrosionproof capping mm. 24xH38 for each component inclusive the cross tees.The perimetrical finishes will be made using a prepainted galvanized steel frames type RA.24x24 “L” section profile 24x24 mm. To increase soundproofing and noise control, the “BOXER VT-9 TEGULAR” panels will be supplied with Ø 3 mm. perforations or, alternatively, Ø 2 mm. micro-perforation with total or central surface (as required by the site management).Each panel must be supplied with acoustic “TNT” non woven textile soundproofing fabric thermal applied on the back of each panel.
BOXER®
VT-15 MICROLOOK DESIGN“METALSCREEN BOXER VT-15 MICROLOOK” 0,5-0,6-0,7 mm. thick, prepainted aluminium ceiling recessed panels dimension mm. 595x595xH9 with oblique bevelled edges and height: 9 mm. (the colour and the exact thickness will be chosen by the consultants).The “BOXER VT-9 MICROLOOK” panel individually demountable and the panels will be mounted lay-in visible “T” bar grid structure type “TWIN LOCK”. 600x600 mm. modular structure is composed of hot dipped galvanized steel “T” bar profiles with prepainted aluminium corrosionproof capping mm. 15xH38 for each component inclusive the cross tees.The perimetrical finishes will be made using a prepainted galvanized steel frames type RA.24x24 “L” section profile 24x24 mm. To increase soundproofing and noise control, the “BOXER VT-15 MICROLOOK” panels will be supplied with Ø 3 mm perforations or, alternatively, Ø 2 mm. micro-perforation with total or central surface (as required by the site management).Each panel must be supplied with acoustic “TNT” non woven textile soundproofing fabric thermal applied on the back of each panel.
BOXER®
VT-24 DEEP“METALSCREEN BOXER VT-24 DEEP” 0,5-0,6-0,7 mm. thick, prepainted aluminium ceiling recessed panels dimension mm. 595x595xH35 with oblique edges and height: 35 mm. (the colour and the exact thickness will be chosen by the site consultants).The “BOXER VT-24 DEEP” panel individually demountable and the panels will be mounted lay-in visible “T” bar grid structure type “TWIN LOCK”. 600x600 mm. modular structure is composed of hot dipped galvanized steel “T” bar profiles with prepainted aluminium corrosionproof capping mm. 24xH38 for each component inclusive the cross tees.The perimetrical finishes will be made using a prepainted galvanized steel frames type RA.24x24 “L” section profile 24x24 mm. To increase soundproofing and noise control, the “BOXER VT-24 DEEP” panels will be supplied with Ø 3 mm. perforations or, alternatively, Ø 2 mm. micro-perforation with total or central surface (as required by the site management).Each panel must be supplied with acoustic “TNT” non woven textile soundproofing fabric thermal applied on the back of each panel.
BOXER®
SK BOARD PLAN“METALSCREEN BOXER SK BOARD” 0,5-0,6-0,7 mm. thick, prepainted aluminium ceiling flat panels dimension mm. 595x595 with oblique bevelled edges (the colour and the exact thickness will be chosen by the consultants).The “BOXER SK BOARD” panel individually demountable and the panels will be mounted lay-in visible “T” bar grid structure type “TWIN LOCK”. 600x600 mm. modular structure is composed of hot dipped galvanized steel “T” bar profiles with prepainted aluminium corrosionproof capping mm. 24xH38 for each component inclusive the cross tees.The perimetrical finishes will be made using a prepainted galvanized steel frames type RA.24x24 “L” section profile 24x24 mm. To increase soundproofing and noise control, the “BOXER SK BOARD” panels will be supplied with Ø 3 mm. perforations or, alternatively, Ø 2 mm. micro-perforation with total or central surface (as required by the site management).Each panel must be supplied with acoustic “TNT” non woven textile soundproofing fabric thermal applied on the back of each panel.
BOXER®
FLUSH-VT FLAT“METALSCREEN BOXER FLUSH-VT” 0,5-0,6-0,7 mm. thick, prepainted aluminium ceiling flat panels dimension mm. 595x595 with oblique bevelled edges (the colour and the exact thickness will be chosen by the consultants).The “BOXER FLUSH-VT” panel individually demountable and the panels will be mounted lay-in visible “T” bar grid structure type “TWIN LOCK”. 600x600 mm. modular structure is composed of hot dipped galvanized steel “T” bar profiles with prepainted aluminium corrosionproof capping mm. 24xH38 for each component inclusive the cross tees.The perimetrical finishes will be made using a prepainted galvanized steel frames type RA.24x24 “L” section profile 24x24 mm. To increase soundproofing and noise control, the “BOXER FLUSH-VT” panels will be supplied with Ø 3 mm. perforations or, alternatively, Ø 2 mm. micro-perforation with total or central surface (as required by the site management).Each panel must be supplied with acoustic “TNT” non woven textile soundproofing fabric thermal applied on the back of each panel.
TECHNICAL SPECIFICATION
AVAILABLE ALSO IN PREPAINTED
STEEL THICKNESS MM. 0,5
NUOVONEW
NUOVONEW
PLAIN
PERFORATEDTOTAL SURFACEHoles Ø mm. 3 - 10%Plain border mm. 25
PERFORATED CENTRAL SURFACE(mm. 400x400)Holes Ø mm. 3 - 5%Plain border mm. 100
MICRO- PERFORATED CENTRAL SURFACE(mm. 400x400)Holes Ø mm. 2 - 10%Plain border mm. 100
MICRO- PERFORATEDTOTAL SURFACEHoles Ø mm. 2 - 20%Plain border mm. 25
15METALSCREEN® S.p.A. - Via Aldo Moro, 38 - 41030 Bomporto (MO) - Italy EU - Tel. +39 059/8170611 - Fax +39 059/8170633e-mail: [email protected] - www.metalscreen.it
All the designs, photos, logo and symbols, messagges and models of this catalogue is own property, of Metalscreen spa Modena - Italy the international laws covers and protects everythings
BOXER®
VT-9 TEGULAR
BOXER®
VT-15 MICROLOOK DESIGN
BOXER®
VT-24 DEEP
BOXER®
SK BOARD PLAN
CEILINGS PANELS EXPOSED LAY-IN SYSTEM
PACKING: HARDCARTON BOXESDIMENSIONS: mm. 600x600xH100 CONTAIN: nr. 25 pcs. = 9 M2 WEIGHT: kg. 13 VOLUME: M3 0,06CONTAINER CAPACITY: 1x20 FT = approx M2 4500 -1x40 FT = approx M2 9000
PACKING: HARDCARTON BOXESDIMENSIONS: mm. 600x600xH100 CONTAIN: nr. 25 pcs. = 9 M2 WEIGHT: kg. 13 VOLUME: M3 0,06CONTAINER CAPACITY: 1x20 FT = approx. M2 4500 -1x40 FT = approx M2 9000
PACKING: HARDCARTON BOXESDIMENSIONS: mm. 600x600xH100 CONTAIN: nr. 25 pcs. = 9 M2 WEIGHT: kg. 13 VOLUME: M3 0,06CONTAINER CAPACITY: 1x20 FT = approx. M2 4500 -1x40 FT = approx M2 9000
TWIN LOCK ®
TWIN LOCK ®
mm. 595
mm. 595
mm. 595
mm. 595
BOXER®
FLUSH-VT FLAT
mm. 595
45
• FAST AND EASY INSTALLATION • INEXPENSIVE AND FUNCTIONAL • QUICK ACCESS FOR DISMOUNTING, SCRATCHPROOF • SPECIAL PACKING REDUCES FREIGHT CHARGES • LIFE TIME, MAINTENANCE FREE, GERMOPROOF • WASHABLE, RESISTANT TO DAMPNESS AND
ATMOSPHERIC ELEMENTS, CORROSIONPROOF • DUST PROOF • NO RELEASE DANGEROUS MICROFIBERS INTO THE
ENVIRONMENT
NUOVO
NEW
BOXER® LAY-IN
TWIN LOCK ®
TWIN LOCK ®
PACKING: HARDCARTON BOXESDIMENSIONS: mm. 600x600xH100 CONTAIN: nr. 25 pcs. = 9 M2 WEIGHT: kg. 13 VOLUME: M3 0,06CONTAINER CAPACITY: 1x20 FT = approx M2 4500 -1x40 FT = approx M2 9000
PACKING: HARDCARTON BOXESDIMENSIONS: mm. 600x600xH100 CONTAIN: nr. 25 pcs. = 9 M2 WEIGHT: kg. 13 VOLUME: M3 0,06CONTAINER CAPACITY: 1x20 FT = approx M2 4500 -1x40 FT = approx M2 9000
“TNT”ACOUSTICNONWOVENTEXTILE
P
AN
EL
S
METAL SNAPTYPE BCU SPRING
FOR PANEL FASTENING
TWIN LOCK ®
1616METALSCREEN® S.p.A. - Via Aldo Moro, 38 - 41030 Bomporto (MO) - Italy EU - Tel. +39 059/8170611 - Fax +39 059/8170633
e-mail: [email protected] - www.metalscreen.itAll the designs, photos, logo and symbols, messagges and models of this catalogue is own property, of Metalscreen spa Modena - Italy the international laws covers and protects everythings
TRIPLEX ®
ALUMINIUM DECORATIVES FALSE CEILINGS TECHNICAL SPECIFICATIONS
TRIPLEX 2 - Q6060 “CLIP-IN”CONCEALED SYSTEM
Decorative false ceiling METALSCREEN “TRIPLEX 2” panels mm. 600x600 with open windows mm. 100x45 painted aluminium mm. 0,6-0,7 thickness.The panels “TRIPLEX 2” can be installed on concealed clip-in suspension systemWallanglesperimetricalframesaluminiumsamecolouraspanel.The panels can be perforated Ø mm. 3 diameter with acoustic nonwoven black tissue thermal applied on the back of each panel.
TRIPLEX 2 - BOXER “LAY-IN”EXPOSED SYSTEM
Decorative false ceiling METALSCREEN “TRIPLEX 2” panels mm. 600x600 with open windows mm. 100x45 painted aluminium mm. 0,6-0,7 thickness.The panels “TRIPLEX 2” can be installed on concealed clip-in suspension system or exposed lay-in “t-BAR” system “Twin Lock” mm. 24xH38 with aluminium corrosion proof capping of the same colour as the panels.Wallanglesperimetricalframesaluminiumsamecolouraspanels.The panels can be perforated Ø mm. 3 diameter with acoustic nonwoven black tissue thermal applied on the back of each panel.
TRIPLEX 1 - TRIPLEX 2EXPOSED SYSTEM LAY-IN
SK BOARD
VT-9 TEGULAR VT-15 MICROLOOK
NUOVO
NEW
mm. 24 mm. 24
mm. 24 mm. 15
FLUSH-VT
17METALSCREEN® S.p.A. - Via Aldo Moro, 38 - 41030 Bomporto (MO) - Italy EU - Tel. +39 059/8170611 - Fax +39 059/8170633e-mail: [email protected] - www.metalscreen.it
All the designs, photos, logo and symbols, messagges and models of this catalogue is own property, of Metalscreen spa Modena - Italy the international laws covers and protects everythings
TRIPLEX 1 - “CLIP-IN” CONCEALED SYSTEM RECTANGULAR SLOT PERFORATION
TRIPLEX 1 - “LAY-IN” EXPOSED SYSTEM RECTANGULAR SLOT PERFORATION
NUOVO
NEWTRIPLEX ®
SUSPENSION SYSTEMS
mm. 595TWIN LOCK®
3838
24
9 mm.
15
TRIPLEX 1 - Q6060 CLIP-INCONCEALED SYSTEM
Decorative false ceiling type METALSCREEN “TRIPLEX 1” panels mm. 600x600 with rectangular open slot mm. 15x110 painted aluminium mm. 05-06-07 thickness.The panels “TRIPLEX 1” can be installed on concealed clip-in suspension system.Wallanglesperimetricalframesaluminiumsamecolouraspanels.The panels can be perforated ∅ mm. 3 diameter with acoustic nonwoven black tissue thermal applied on the back of each panel.
TRIPLEX 1 - BOXER “LAY-IN”EXPOSED SYSTEM
Decorative false ceiling type METALSCREEN “TRIPLEX 1” panels mm. 600x600 with rectangular open slit mm. 15x110 painted aluminium mm. 0,5-0,6-0,7 thickness.The panels “TRIPLEX 1” can be installed on exposed lay-in “T Bar” system “Twin Lock” mm. 24xH38 with aluminium corrosion proof capping of the same colour as the panels.Wallanglesperimetricalframesaluminiumsamecolouraspanels.The panels can be perforated ∅ mm. 3 diameter with acoustic nonwoven black tissue thermal applied on the back of each panel.
TECHNICAL SPECIFICATIONS
ALUMINIUM DECORATIVES FALSE CEILINGS
600 600 600
SPRING TEE RUNNERCONCEALED ITEM 08
ADJUSTMENTRUNNER CLIPS ACCESSORYITEM 09/B
1
2
P
AN
EL
S
1818METALSCREEN® S.p.A. - Via Aldo Moro, 38 - 41030 Bomporto (MO) - Italy EU - Tel. +39 059/8170611 - Fax +39 059/8170633
e-mail: [email protected] - www.metalscreen.itAll the designs, photos, logo and symbols, messagges and models of this catalogue is own property, of Metalscreen spa Modena - Italy the international laws covers and protects everythings
O
PE
N C
EL
L C
EIL
ING
S SUSPENDED FALSE CEILINGSALUMINIUM CORROSION PROOFOPEN CELL CEILINGS SYSTEMS
FALSE CEILINGS INDUSTRYBUILDING PROFILES ANDSUSPENSION SYSTEMS FACTORY
19METALSCREEN® S.p.A. - Via Aldo Moro, 38 - 41030 Bomporto (MO) - Italy EU - Tel. +39 059/8170611 - Fax +39 059/8170633e-mail: [email protected] - www.metalscreen.it
All the designs, photos, logo and symbols, messagges and models of this catalogue is own property, of Metalscreen spa Modena - Italy the international laws covers and protects everythings
“TRADIZIONALE”
ALUMINIUM OPEN CELL CEILINGS
“TRADIZIONALE”
ALUMINIUM OPEN CELL CEILINGS
ALUMINIUM OPEN CELL CEILINGS BASE mm. 15
ALUMINIUM OPEN CELL CEILINGS BASE mm. 10
ALUMINIUM OPEN CELL CEILINGS SECTION BLADE “U” BASE mm. 15 LAY IN WITHOUT DIFFERENCES - TOTAL FULL INSPECTION
METALSCREEN®
2020METALSCREEN® S.p.A. - Via Aldo Moro, 38 - 41030 Bomporto (MO) - Italy EU - Tel. +39 059/8170611 - Fax +39 059/8170633
e-mail: [email protected] - www.metalscreen.itAll the designs, photos, logo and symbols, messagges and models of this catalogue is own property, of Metalscreen spa Modena - Italy the international laws covers and protects everythings
METALSCREEN®
METALSCREEN FACTORY is the lead-ing Italian manufacturer of various models of aluminium open cell sus-pended ceilings systems.kindly contact us for all your require-ment and will answer to you, our best competitive prices.
TRIPLEX/2 COKI-U “TRADIZIONALE” RECTANGULAR
“COKI-B15”
COKI-U “TRADIZIONALE”
COKI-U “APPOGGIO”
21METALSCREEN® S.p.A. - Via Aldo Moro, 38 - 41030 Bomporto (MO) - Italy EU - Tel. +39 059/8170611 - Fax +39 059/8170633e-mail: [email protected] - www.metalscreen.it
All the designs, photos, logo and symbols, messagges and models of this catalogue is own property, of Metalscreen spa Modena - Italy the international laws covers and protects everythings
INSTALLATION GUIDELINES “TRADIZIONALE”
Metal double snap 23/D
R 1800 main runner
R 1200 cross profile
R 600 cross profile
Panel mm. 600x600R 1800 main runner
CouplingGK
R 600cross profile
Rigid steel hanger type 100
Panel mm. 600x600assembled
MESH DIMENSION “TRADIZIONALE”
mm.10
mm.40
mm.10
mm.50
CouplingGKThe universal composition of “U” shaped blades base mm. 10 makes the “TRADIZIONALE” the most utilized open cell ceiling system of the world. It is composed by aluminium profiles that assembled composed the open cell ceiling:Main runner type R 1800 mm.Cross profile type R 1200 mm.Cross profile type R 600 mm.Blade type “A” (male) mm. 600Blade type “B” (female) mm. 600
Coupling for R 1800 type cavaliereGK
On mesh cell dimension mm. 50x50 and
mm.60x60 not necessary the cross
profiles type R 1200 mm.
“ ”
Blade “A”“MALE”
Blade “B”“FEMALE”
Blade type A (male) assembled whitblade type B (female) to obtain a panel mm. 600x600 to install on the grid system of the “TRADIZIONALE”
blades section“u”
“TRADIZIONALE”
base base
TECHNICAL SPECIFICATION “TRADIZIONALE”
Open cell ceilings concealed system type METALSCREEN “TRADIZIONALE” prepainted aluminium corrosionproof incombustible class “0” - Euroclass fire reaction A1. (colour and mesh cells dimension choosed by the consultant).The open cell ceilings system is composed by U shaped profiles base width mm. 10 and height mm. 40 or mm. 50 (the height choosed by the consultant).Combine all the required components made of aluminium of the same colour it will obtained a regular open cell ceilings without any joints or visual interruption.To obtain better soundproofing, the “U” shaped blades con be microperforated diameter Ø mm. 2 with acoustic “TNT” non woven thermal applied on the back.
O
PE
N C
EL
L C
EIL
ING
S
MESH CELL SIZE mm.
50x5060x6075x7586x86
100x100120x120150x150200x200
50x10060x12075x150100x200
2222METALSCREEN® S.p.A. - Via Aldo Moro, 38 - 41030 Bomporto (MO) - Italy EU - Tel. +39 059/8170611 - Fax +39 059/8170633
e-mail: [email protected] - www.metalscreen.itAll the designs, photos, logo and symbols, messagges and models of this catalogue is own property, of Metalscreen spa Modena - Italy the international laws covers and protects everythings
Open cell ceilings lay-in system type METALSCREEN “COKI-B15” prepainted aluminium corrosionproof incombustible class “0” - Euroclass fire reaction A1. (colour and mesh cells dimension choosed by the consultant).The open cell “COKI-B15” must have “U” shaped section width mm. 15xH38,5 to became a panel mm. 600x600 complete of the lateral edge cover profile in aluminium same colour as the open cell panel.It will be installed lay-in on exposed T bar system “TWIN LOCK” mm. 600x600xH38 with the base mm. 15 of the same colour of the cell ceilings to abtain the perfect aesthetical result without any joint or visual interruption.Each panel must be easily removable for inspections.The peculiarity and particularly is to obtain a lay-in open cell ceiling without differences between the panels and the T bar system that must be of the same module width mm. 15.To obtain better soundproofing, the “U” shaped blades con be microperforated diameter Ø mm. 2 with acoustic “TNT” non woven sticked on the back.
ALUMINIUM OPEN CELL CEILING SECTION BLADE “U” BASE MM. 15
METALSCREEN produces a wide range of aluminium grids for false ceilings, with various sizes of cell, section shapes and type of finish.Offers designers and users a host of possibilities of use in line with the criteria of integrated architecture.The false ceilings system is principally used for shielding technological plants, for lighting schemes and to unify more uniform particular spaces with unusual shapes and uneven heights.The practical and aesthetic benefits offered by these solutions are thousands: light and air are evenly distributed while no part of the lighting or the structure remain visible thus permitting the overall use of the space above for other purposes. A harmonizing effect may be created between the various compositional structures in the setting. Thereby imparting an uniform, harmonious atmosphere. The lightness of the materials and the possibility of using small panels set along side each other that do not reveal the load- bearing structure, enable easy, practical maintenance of any located in the space above the false ceiling.The modular nature of the components, the simplification of accessories, the rationalisation of the installation systems, the material itself aluminium, make open cell ceilings an extremely simple and inexpensive system of top quality.
BASE MATERIALS SPECIFICATIONOpen cell ceilings are made of pre-painted aluminium. Thanks to the quality of base materials used, which are produced according to norm EN, ASTM and in compliance with ECCA (European Coil Coating Association), the false ceilings feature either the high ease of installation and the reaction fire Class 0 (un-combustible). Euroclass A1.Generally, the aluminium nails are prepainted: a polyester paint on top side, to achieve decorative purpose in a nominal thickness of 20 microns, a protective paint on back side.The nature of these products allows for use of open cell ceilings in external applications also.
ALUMINIUM AS THE SOLUTIONS OF THE FUTURE FOR A BETTER WORLDOpen cell ceiling systems are made of aluminium washable, corrosionproof, dustproof, longlasting life.The reason of this choice is because aluminium offers many advantages to designers and installers:Light weight: aluminium weight (one third of the same volume of steel) makes very easy the transport, the mounting and demouting of ceiling, saving the relative costs;Long-lasting and resistance: being naturally protected by a thin film of oxide highly thick and adherent (alumina Al2O3), it results resistant to air and weathering corrosion. It means that without special surface
TECHNICAL SPECIFICATION LAY-IN SYSTEM ON “T” 15xH38
38
15
TWIN LOCK ®
MESH DIMENSIONS
38
15
LATERAL EDGE COVER PROFILE
NUOVONEW
TOTAL FULL INSPECTION-REMOVABLES
15
38,5
base
MESH CELL SIZES mm.
50x5060x6075x7586x86
100x100120x120150x150200x200
protection, almost all the aluminium alloys do not deteriorate in time, are extremely durable, no requiring any maintenance;Versatility: the range in terms of chemicals composition and finishes is so wide to meet every functional or aesthetic requirements;Aesthetic: it is surely one of the most beautiful metal, thanks to its natural colour, its light weight, as confirmed by the wide application of this material in architecture, interior and industrial design. Aluminium is, for itself nature, expression of innovation and design.Fire reaction: as for tire reaction, it is deemed to be Class 0. It means aluminium does not generate toxic net hazardous products. Besides, in case of fire, the use of open cell ceiling makes large quantities of smoke can be extracted allowing a better visibility and safe way.Eco-compatibility: aluminium is well-known as the “green” metal, actually it is recycled by 70% and its cost in terms of energy is of one twentieth that of the first melting. This high intrinsic value of aluminium add value to such products ad false ceilings, which make use of this.
Lateral edge cover profile
TWIN LOCK ® mm. 15xH38
23METALSCREEN® S.p.A. - Via Aldo Moro, 38 - 41030 Bomporto (MO) - Italy EU - Tel. +39 059/8170611 - Fax +39 059/8170633e-mail: [email protected] - www.metalscreen.it
All the designs, photos, logo and symbols, messagges and models of this catalogue is own property, of Metalscreen spa Modena - Italy the international laws covers and protects everythings
38
1515
38,5
LATERAL EDGE COVER PROFILE
Lateral edge cover profile
Lateral edge cover profile
COKI-B15 the aluminium open cell ceilings inspired in the class wooden grid, made up of “U” shaped profiles with a width of 15 and height of 40:Specially designed to fit into standard 15 or 24 mm wide t-grids, they provide a trackless appearance of the ceilings.COKI-B15 are high quality products for easiest placement and removal of the panels.
FEATURESCOKI B-15 feature 600x600 mm. modular panels, made up of “U” shaped profiles with 15 mm. base, wich suitably cou-pled form a square cell, to be inserted in a frame. COKI B-15 blades are made by benging system, which gives: the accuracy of profiles, more square edges and blades perfectly straight.
SUPPLY FORMCOKI B-15 are usually supplied unassembled. It allows for easier packages and more economic transports. Upon request, the panels can be also supplied assembled, ready to be installed.
FIRE REACTIONOpen cell ceilings are classified incombustible in compliance with intenational standars. Euroclass A1 - “0” class.
INSTALLATIONThe COKI B-15 are installe in the suspension grids formed by T-profiles, 15 or 24 mm wide, 3600, 1200 and 600 mm. lenght.Whenthepanelislaidintothesuspensiongrid,thestructure results full inyegrated in the cell ceiling.The modular panels 600x600 mm. are easily individually laid into and taken out of the standard T grid, by lifting them upwards for simple access to the plenum.
TWIN LOCK ® mm. 15xH38
base
COKI B-15 particularly suggested to shield above the ceilings:
•Smokeandgassignaldevices•Loudspeakersformusicorinformations•Extinguishsprinklersfiresafety•Getinsignalbellalarm•Safetyandcontrolvideocameras
SAFETY SECURITY SAFETY SECURITY
ALUMINIUM OPEN CELL CEILING SECTION BLADE “U” BASE MM. 15
NUOVO
NEW
O
PE
N C
EL
L C
EIL
ING
S
2424METALSCREEN® S.p.A. - Via Aldo Moro, 38 - 41030 Bomporto (MO) - Italy EU - Tel. +39 059/8170611 - Fax +39 059/8170633
e-mail: [email protected] - www.metalscreen.itAll the designs, photos, logo and symbols, messagges and models of this catalogue is own property, of Metalscreen spa Modena - Italy the international laws covers and protects everythings
Open cell ceiling lay-in system type METALSCREEN “APPOGGIO T24” prepainted aluminium corrosionproof incombustible class “0” - Euroclass fire reaction A1 (colour and mesh cells dimension choosed by the consultant). The open cell ceiling panels must have “U” shaped section base width mm. 10 or mm. 15 and height mm. 40 (the base width dimension choosed by the consultant).The open cell panels mm. 600x600 will be installed lay-in on exposed T bar grid 600x600xH38 system “TWIN LOCK” mm. 24xH38 of the same colour as the open cell ceiling.Each panel must be easily removable for inspection.
mm.10
mm.40
mm.10
mm.50
“APPOGGIO” T 24 MM.
“APPOGGIO” base mm. 10lay-in mm. 24 x H38
TWIN LOCK ®
38
24
MESH DIMENSION “APPOGGIO T 24”
TECHNICAL SPECIFICATIONS:
Total full inspection-each panel removable - Fast installation - Quick maintenance
INSTALLATION GUIDELINES “APPOGGIO” T 24” BASE MM. 10 e MM. 15
base base
mm.10
mm.40
mm.10
mm.50
38
base
15
38,5
“APPOGGIO” base mm. 15lay-in mm. 24 x H38
TWIN LOCK ®
NUOVO
NEW24
The panels with mm. 15 base give back the best aestetic result from the ceiling
The modular panels 600x600 mm. are easily individually laid and taken out of the standard T grid, by lifting them upwards for simple access to the plenum.
MESH CELL SIZE mm.
50x5060x6075x7586x86
100x100120x120150x150200x200
50x10060x12075x150
100x200
25METALSCREEN® S.p.A. - Via Aldo Moro, 38 - 41030 Bomporto (MO) - Italy EU - Tel. +39 059/8170611 - Fax +39 059/8170633e-mail: [email protected] - www.metalscreen.it
All the designs, photos, logo and symbols, messagges and models of this catalogue is own property, of Metalscreen spa Modena - Italy the international laws covers and protects everythings
OPEN CELL CEILINGS SYSTEMS
Blade A:“MALE”
Blade B:“FEMALE”
Blade type A (male) assembled whitblade type B (female) to obtain a panel mm. 595x595 lay-in on the T24 bar exposed system:
“APPOGGIO” T 24 mm. BASE mm. 10 mm. 15 LAY-IN mm. 24xH38
Panel mm. 595x595assembled
“APPOGGIO” T24
38
24
TWIN LOCK ®
O
PE
N C
EL
L C
EIL
ING
S
2626METALSCREEN® S.p.A. - Via Aldo Moro, 38 - 41030 Bomporto (MO) - Italy EU - Tel. +39 059/8170611 - Fax +39 059/8170633
e-mail: [email protected] - www.metalscreen.itAll the designs, photos, logo and symbols, messagges and models of this catalogue is own property, of Metalscreen spa Modena - Italy the international laws covers and protects everythings
L
INE
AR
ST
RIP
ES SUSPENDED FALSE CEILINGS
ALUMINIUM LINEAR STRIPESCORROSION PROOF FOR INTERIOR
AND EXTERIOR APPLICATIONS
FALSE CEILINGS INDUSTRYBUILDING PROFILES ANDSUSPENSION SYSTEMS FACTORY
METALSCREEN®
27METALSCREEN® S.p.A. - Via Aldo Moro, 38 - 41030 Bomporto (MO) - Italy EU - Tel. +39 059/8170611 - Fax +39 059/8170633e-mail: [email protected] - www.metalscreen.it
All the designs, photos, logo and symbols, messagges and models of this catalogue is own property, of Metalscreen spa Modena - Italy the international laws covers and protects everythings
L
INE
AR
ST
RIP
ES
2828METALSCREEN® S.p.A. - Via Aldo Moro, 38 - 41030 Bomporto (MO) - Italy EU - Tel. +39 059/8170611 - Fax +39 059/8170633
e-mail: [email protected] - www.metalscreen.itAll the designs, photos, logo and symbols, messagges and models of this catalogue is own property, of Metalscreen spa Modena - Italy the international laws covers and protects everythings
Type LT/100Tipe LT/150CLOSED GAP
Type LC84OPEN GAP
CLIP FIT STRIP CONNECTION
CLIP FIT STRIP CONNECTION
ALUMINIUM CEILING LINEAR STRIPS CLASS “0” FIREPROOF - EUROCLASS A1 - CORROSIONPROOF
mm. 84
mm. 16
mm. 16
mm. 84
PERFORATIONS AND SOUNDPROOFING
Ø mm 2 DIAMETER HOLES DIAGONAL CENTRAL SURFACE.
SPECIFICATIONSFalse ceilings system composed with linear stripes METALSCREEN type LC mm. 84 round angles open gap mm. 16 or mm. 6 or METALSCREEN type LT width mm. 100 closed gap (type, thickness, gap and colour choosed by the consultant) aluminium prepainted thickness mm. 0,5-0,6.The type LC or type LT/100 stripes will be installed on supporting main carrier type 63 galvanized hot dipped steel or painted black thickness mm. 0,6 and suspended with rigid steel galvanized hangers with metal snap suspension, finished with perimetrical wall angle frames “L” section type RA with connection joint. To obtain the best soundproofing result the type LC or type LT/100 stripes must be perforated with holes diameter Ø mm. 3 or Ø mm. 2 on the total surface with acoustical “TNT” non vowen textile thermal applied on the back of each stripe.
TECHNICAL SPECIFICATIONS
TYPE LCOpen
TYPE LSOpen ribbed
TYPE LTClosed
“TNT” acoustic
thermosticked
mm. 16
mm. 16
ALUMINIUM JOINT FILLER CLICK PROFILE FOR OPEN STRIPS TYPE LC/100 AND TYPE LS/100TYPE 46-Jointfillerclickprofileprepainings aluminium in black/white or also available in brilliant colours on request. Length: 3,000 mm. (incidence: LM 10x1 m2).
TYPE 46
63
63
mm. 134
Ø 3 mm DIAMETER HOLES DIAGONAL FULL SURFACE OF THE STRIP.
Ø mm 2 DIAMETER HOLES WITH REGULAR CENTRAL SURFACE
The strips can be perforated to obtain a good soundproofing level result within the frequency range of 200 to 4,000 Hz. Even higher levels can be increased with acoustic textile “TNT”non vowen which guarantees soundproofing even after repeated maintenance has been carried out on the ceiling panels. It reduces the installation cost and does not allow dangerous microfibres pollution into the air.
29METALSCREEN® S.p.A. - Via Aldo Moro, 38 - 41030 Bomporto (MO) - Italy EU - Tel. +39 059/8170611 - Fax +39 059/8170633e-mail: [email protected] - www.metalscreen.it
All the designs, photos, logo and symbols, messagges and models of this catalogue is own property, of Metalscreen spa Modena - Italy the international laws covers and protects everythings
STRIP LC/100 OPEN (m. 84+16)
STRIP LC/90 OPEN (m. 84+6)
6 84 6 84 6 84 690 90 90
16 84 16 84 16 84 16100 100 100
STRIP LT/100 CLOSED GAP
16 84 16 84 16 84 16100 100 100
MOUNTING ON TYPE 63/U MAIN SUPPORTING CARRIERS PLEASE STATE PITCH 90-100-150
FLEXIBLE MAIN SUPPORTING CARRIER
TYPE 62/90TYPE 62/100(Please state pitch)
Flexible main supporting carrierStrip hanger LC-LS in galvanized steel or painted black,thickness 0.6 mm. Length: 4,000 mm.
LIGHTING FIXTURES
1x18 W / 1x36 W / 1x58 W
TYPE: 63/U90 - 63/U150
Main supporting carrier galvanized steel or prepainted black. Lenght: 4,000 mm. Gap nr. 6-16. Thickmess 0,6 mm.
STRIP LT/150 CLOSED GAP
16 84 16 84 16 84 16100 100 100
134 134 134
galvanized steelhangers type 100 Ø 4 mm.metalsnap
type 23/double
main supporting carrier type 63
150 150 150
20
40
NUOVO
NEW
L
INE
AR
ST
RIP
ES
3030METALSCREEN® S.p.A. - Via Aldo Moro, 38 - 41030 Bomporto (MO) - Italy EU - Tel. +39 059/8170611 - Fax +39 059/8170633
e-mail: [email protected] - www.metalscreen.itAll the designs, photos, logo and symbols, messagges and models of this catalogue is own property, of Metalscreen spa Modena - Italy the international laws covers and protects everythings
ALUMINIUM CEILING LINEAR STRIPS CLASS “0” FIREPROOF EUROCLASS A1 - CORROSIONPROOF
mm. 150 - mm. 200 - mm. 300
mm. 19
Type LA/150Type LA/200Type LA/300
mm. 150 - mm. 200 - mm. 300
mm. 19
Type LA/150 RIV-WITHOUT JOINT GAPType LA/200 RIV-WITHOUT JOINT GAPType LA/300 RIV-WITHOUT JOINT GAP
Type LD - R WIDTH mm. 200-300SELF SUPPORTING WITH BEVELLED RENFORCED EDGES
Fast installation Quick maintenance each stripes can be removed only with one hand. Particularly suggested for: corridors - restrooms - small rooms - lift elevators. self supporting without any hangers or carriers only lay-in on wall angles perimetrical frames. Maximum self support mm. 3300 without carriers.
01
PITCH mm. 150-200-300
TECHNICAL SPECIFICATION:False ceilings system composed with self supporting linear stripes METALSCREEN type LD-R SELF SUPPORTING width mm. 200 or mm. 300 (width and colour choosed by the consultant) aluminium prepainted thickness mm. 0,6.The type LD-R SELF SUPPORTING stripes will be installed lay-on the perimetrical wall angle frames “L” section type RA with connection joint. The stripes must be height mm. 29 and with the renforced bevelled edges to obtain a perfect complanarity of the final result of the ceilings.To obtain the best soundproofing result the type LD-R SELF SUPPORTING stripes must be perforated with holes diameter Ø mm. 3 or Ø mm. 2 on the total surface with acoustical “TNT” non vowen textile thermal applied on the back of each stripe.
SELF SUPPORTING RENFORCED STRIPES FOR CORRIDORSTYPE LD-RSELF SUPPORTING RENFORCED BEVELLED EDGES
Rounded closing gap
Height mm. 29
Renforced bevelled edges
NUOVO
NEW
PARTICULARLY SUGGESTED FOR:• CLADDINGS • OUTSIDE CORRIDORS • PETROL GAS PUMP STATIONS• SUBWAY CORRIDORS • EXTERIOR CEILINGS
TECHNICAL SPECIFICATION:False ceilings system composed with linear stripes METALSCREEN type LA width mm. 150 or mm. 200 or mm. 300 (width, thickness and colour choosed by the consultant) aluminium prepainted thickness mm. 0,5-0,6-0,7.The type LA stripes will be installed on supporting main carrier type 63 galvanized hot dipped steel thickness mm. 0,6 and suspended with rigid steel galvanized hangers with metal snap suspension, finished with perimetrical wall angle frames “L” section type RA with connection joint. To obtain the best soundproofing result the type LA stripes must be perforated with holes diameter Ø mm. 3 or Ø mm. 2 on the total surface
with acoustical “TNT” non vowen textile thermal applied on the back of each stripe.63
31METALSCREEN® S.p.A. - Via Aldo Moro, 38 - 41030 Bomporto (MO) - Italy EU - Tel. +39 059/8170611 - Fax +39 059/8170633e-mail: [email protected] - www.metalscreen.it
All the designs, photos, logo and symbols, messagges and models of this catalogue is own property, of Metalscreen spa Modena - Italy the international laws covers and protects everythings
STRIP TYPE LA/150
MOUNTING ON TYPE 63/U AND TYPE 01 MAIN SUPPORTING CARRIES PLEASE STATE PITCH 150-200-300
mm. 150
TYPE: 63/U90 - 63/U100 - 63/U150 20
40
20
40
Main supporting carrier galvanized steel.Thickness: 0,6 mm. - Lenght: 4,000 mm.
TYPE: 63/150 Z
Main supporting carrier galvanized steel.Thickness: 0,6 mm. - Lenght: 4,000 mm.
Main supporting Omega rigid carrier galvanized steel.Thickness: 0,6 mm. - Lenght: 4,000 mm.
2775
20
TYPE: 01/150 - 01/200 - 01/300 “OMEGA” STRONG RENFORCED
PERIMETRICAL FRAME WALL ANGLE “L” SECTION mm. 24X24 WITH CONNECTOR JOINT
• QUICK AND EASY INSTALLATION
• PERFECT ALLIGNMENT• TOP AESTHETICS
RESULTS
NUOVO
NEW
TSTRIP TYPE LA/150 RIV. WIHOUT JOINT GAP
150 150
STRIP TYPE LA/200 RIV. WITHOUT JOINT GAPSTRIP TYPE LA/300 RIV. WITHOUT JOINT GAP
mm. 200mm. 300
mm. 200mm. 300
mm. 200mm. 300
STRIP TYPE LA/200 - STRIP TYPE LA/300
PERFORATIONS AND SOUNDPROOFING
“TNT” acoustic non woven
textile thermal adhesive
Ø mm 2 DIAMETER HOLES DIAGONAL CENTRAL SURFACE.
Ø 3 mm DIAMETER HOLES DIAGONAL FULL SURFACE OF THE STRIP.
The strips can be perforated to obtain a good sound proofing level result within the frequency range of 200 to 4,000 Hz. Even higher levels can be increased with acoustic “TNT” textile non vowen which guarantees
soundproofing even after repeated maintenance has been carried out on the ceiling panels. It reduces the installation cost and does not allow dangerous microfibres pollution into the air.
EXTERIOR CLADDINGS
L
INE
AR
ST
RIP
ES
3232METALSCREEN® S.p.A. - Via Aldo Moro, 38 - 41030 Bomporto (MO) - Italy EU - Tel. +39 059/8170611 - Fax +39 059/8170633
e-mail: [email protected] - www.metalscreen.itAll the designs, photos, logo and symbols, messagges and models of this catalogue is own property, of Metalscreen spa Modena - Italy the international laws covers and protects everythings
MOUNTING ON TYPE 43 MAIN SUPPORTING CARRIERS
TYPE: 4320
40
Main supporting carrier prepainted steel black.Lenght: 4,000 mm. Gap: 20 mm. Thickness 0,6 mm.
43
Type GR 50
20 30 20 30 20 30 20 30 20 30 20 30 20 30 20 30 20 30
CUBE STRIP GR 50
mm. 30 mm. 50mm. 20
TECHNICAL SPECIFICATIONS:
False ceilings system composed with cube linear stripes MEtalsCREEn type GR50 width mm. 30 + 20open gap (colour choosed by the consultant) aluminium prepainted thickness mm. 0,5.The type GR50 stripes will be installed on
supporting main carrier type 43 prepainted black steel thickness mm. 0,6 and suspended with rigid steel galvanized hangers with metal snap suspension, finished with perimetrical wall angle frames “L” section type RA with connection joint. To obtain the best soundproofing result the type GR50 stripes must be perforated with holes diameter Ø mm. 3 or Ø mm. 2 on the total surface with acoustical “TNT” non vowen textile thermal applied on the back of each stripe.
ALUMINIUM CEILING CUBE STRIPES CLASS “O” EUROCLASS A1 FIREPROOF - CORROSIONPROOF
CUBE STRIP Type GR 50
Type 48 internal closing joint prepainted aluminium black/white or also available in brillant colours on request. Lenght: 3,000 mm.
INTERNAL CLOSING GAP PROFILE FOR CUBE STRIPES TYPE GR 50
48
mm.38
mm. 30
Type GR 50
33METALSCREEN® S.p.A. - Via Aldo Moro, 38 - 41030 Bomporto (MO) - Italy EU - Tel. +39 059/8170611 - Fax +39 059/8170633e-mail: [email protected] - www.metalscreen.it
All the designs, photos, logo and symbols, messagges and models of this catalogue is own property, of Metalscreen spa Modena - Italy the international laws covers and protects everythings
ALUMINIUM CEILING VERTICAL STRIPS CLASS “0” EUROCLASS A FIREPROOF - CORROSIONPROOF
TECHNICAL FEATURES OF THE CEILING PANELLING COMPONENTS
44
100
100 100100 100
mm. 88
Type LH1VERTICAL STRIPES
TYPE LH1
TECHNICAL SPECIFICATIONS:False ceilings system composed with vertical stripes MEtalsCREEn type lH1 height mm. 88 pitch mm. 100 (colour choosed by the consultant) aluminium prepainted thickness mm. 0,6 painted one side.The type LH1 stripes will be installed on supporting main carrier type 44 prepainted white steel thickness mm. 0,6 and suspended with rigid steel galvanized hangers with metal snap suspension. To obtain the best soundproofing result the type lH1 stripes must be perforated with holes diameter Ø mm. 3 or Ø mm. 2 on the total surface with acoustical “TNT” non vowen textile thermal applied on the back of each stripe.
Using the vertical LH, suggested for large rooms, it point out the nicely and beautiful final result, with the comfortable diffusion light effect covering also all over the ceiling system: tubes, pipes, sprinklers, concealed control security videocameras.
PARTICULARLY SUGGESTED FOR:• SHOW ROOMS • AIRPORTS• SHOPPING MALLS • FOOD MARKETS• GARAGE • CORRIDORS
MOUNTING ON TYPE 44 MAIN SUPPORTING CARRIERS
VERTICAL STRIP TYPE LH1
100 100 100
130
TYPE 44
Main supporting carrier prepainted steel white.Lenght: 4,000 mm.
30
42
39
L
INE
AR
ST
RIP
ES
3434METALSCREEN® S.p.A. - Via Aldo Moro, 38 - 41030 Bomporto (MO) - Italy EU - Tel. +39 059/8170611 - Fax +39 059/8170633
e-mail: [email protected] - www.metalscreen.itAll the designs, photos, logo and symbols, messagges and models of this catalogue is own property, of Metalscreen spa Modena - Italy the international laws covers and protects everythings
LINEAR STRIPES
LACLOSED GAP
SHARPANGLES GR 50
CUBE
LHVERTICAL
LCOPEN GAP
ROUNDANGLES
TYPE LH1
Renforced bevelled edges
LAY-ONWALLANGLESWITHOUTSUSPENSION RUNNERS
PITCH mm. 100-90
mm. 16-6
TYPEPROFILE
LD-RSELF
SUPPORTINGRENFORCED
WITHBEVELLED
EDGESLS
RIBBED
LA-RIVCLOSED
WITHOUTJOINT SHARP
ANGLES
PITCH mm. 100-150
LTCLOSED GAP
ROUNDANGLES
mm. 16-6
PITCH mm. 150-200-300
LINEAR STRIPES OF PREPAINTED ALUMINIUM FIRE EACTION “O” FIREPROOF - CORROSIONPROOF - WASHABLE - PLAIN OR PERFORATED - AVAILABLES ALSO IN PREPAINTED STEEL
TYPEPROFILE
LINEAR STRIPES OF PREPAINTED ALUMINIUM FIRE EACTION “O” FIREPROOF - CORROSIONPROOF - WASHABLE - PLAIN OR PERFORATED - AVAILABLES ALSO IN PREPAINTED STEEL
mm. 30
48
PITCH mm. 200-300
TYPE 46
84
84
mm. 50 mm. 20
NUOVO
NEW
63/150 Z
63/U9063/U10063/U150
(SPECIFY THE PITCH)
TYPEPROFILE
ACCESSORIES AND PROFILES TOINSTALL THE CEILINGS SYSTEM
Length mm. 4000
Length mm. 4000
mm. 150
Main supporting runner (stripes LA/150-LA/300)galvanized steel thickness mm. 0,6
Main supporting runner (stripes LC-LT-LA/200-LS)
20
40
20
40
FALSE CEILINGS SYSTEMS LINEAR MODULAR STRIPES FIREPROOF
43
PITCH mm. 150-200-300
TYPE 46
PITCH mm. 100-90
WE COSTOMIZE ANY LENGHT
UPON REQUEST OF THE CUSTOMER
29
TYPE 01 OMEGA RENFORCED
STRONG MAIN SUPPORTING
CARRIER HOT DIPPED
GALVANIZED STEEL
Renforced rebated profile became mm. 1,2
35METALSCREEN® S.p.A. - Via Aldo Moro, 38 - 41030 Bomporto (MO) - Italy EU - Tel. +39 059/8170611 - Fax +39 059/8170633e-mail: [email protected] - www.metalscreen.it
All the designs, photos, logo and symbols, messagges and models of this catalogue is own property, of Metalscreen spa Modena - Italy the international laws covers and protects everythings
PROFILES AND ACCESSORIES
S
US
PE
NS
ION
SY
ST
EM
S A
ND
AC
CE
SS
OR
IES
FO
R C
EIL
ING
S
FALSE CEILINGS SYSTEMS LINEAR MODULAR STRIPES FIREPROOF
02
23/D
BRBANDRASTER
mm. 50mm. 100
SM9
100
43
15/30°SUN LOUVER
SUN BREAKERS
15/45°SUN LOUVER
SUN BREAKERS
62/9062/100
FLEXIBLE
TYPE ACCESSORIES AND PROFILES TO INSTALLTHE CEILINGS SYSTEMS TYPE ACCESSORIES AND PROFILES TO INSTALL
THE CEILINGS SYSTEMS
Length mm. 4000
Length mm. 4000
Suspension thin roll galvanized steel for hangers.Each roll (LM 100)Withholesforanykindof hangers
Metal double snap for suspension on rigid hangers
Main supporting carrier (stripes gr 50)prepainted steel black thickness mm. 0,6
Main supporting runner for LC FRANGISOLE 30°prepainted whitealuminiumthickness mm. 1,00
Length mm. 4000
Main supporting runner for LC FRANGISOLE 45°prepainted whitealuminiumthickness mm. 1,00
mm. 84
Length mm. 4000
Length mm. 3000
Main flexible carrier (stripes LC-LS)prepainted steel black thickness mm. 0,6
30
mm. 15
mm. 16 - 13mm. 36-33
mm. 50
mm. 100
BR-50
BR-100
RU-16RU-13
Upstand “F” trym prepainted steel white and silver matt (RAL 9006) length mm. 3000
Perimetrical wall angle shadow mould “double L” section
mm. 19x9x9x19x3000 preprinted steel
Rigid suspenson hanger galvanized steel Ø 4 diam.various length and corners final shes
8
CTYPE 100/C 250 mm. - TYPE 100/C 500 mm.TYPE 100/C 1000 mm.
8
BTYPE 100/B 1000 mm.
8
ATYPE 100/A 500 mm.TYPE 100/A 1000 mm.
8
STRAIGHT
TYPE 100/2000 mm.
steel white and silver matt (RAL 9006) length mm. 4000
mm. 84
mm. 16
mm. 84
mm. 16
mm. 16
20
40
Main supporting Omega renforced runner strong galvanized steel thickness mm. 06 stripes LA - LA/RIV.OMEGA
01(SPECIFY
THE PITCH)STRONG
RENFORCED
20
75
27
∅ 8
RA“BAIONETTA”
CONNECTOR JOINT
Perimetrical wall angles frames type RA with connector joint
NUOVONEW
4648
Jointfillerforclosinggap(linear stripes type LC - LS - GR50) aluminium white/black
TYPE 46TYPE 48SEAGULL
HD
Perimetrical wall angle “C” section mm. 15x20x18H(linear stripes LC - LT - LS)
PrimaryRunner clicktype PS
Type PC-27Amain runner
Type GPS metal snap adjustment for main runner click profile type PS
GYPSUM BOARD“K” CEILINGS KIT
PSPC-27A
GPS
Length mm. 4000
Length mm. 3000
3636METALSCREEN® S.p.A. - Via Aldo Moro, 38 - 41030 Bomporto (MO) - Italy EU - Tel. +39 059/8170611 - Fax +39 059/8170633
e-mail: [email protected] - www.metalscreen.itAll the designs, photos, logo and symbols, messagges and models of this catalogue is own property, of Metalscreen spa Modena - Italy the international laws covers and protects everythings
S
UN
BR
EA
KE
RS
- S
UN
LO
UV
ER
S A
ND
EX
TE
RIO
R C
LA
DD
ING
S ALUMINIUM STRIPES SUN LOUVERS AND CLADDINGS
TECHNICAL SPECIFICATIONExternal cladding with linear stripes mm. 84 METALSCREEN type “LC FRANGISOLE” sun breaker to obtain a sun louver with inclination degrees 30° or 45° (the inclination 30° or 45° and colour choosed by the consultant).The stripes are made of prepainted aluminium corrosionproof incombustible class “0” - Euroclass fire reaction A1 width mm. 84 with round angles and thickness of mm. 0,6.The “LC FRANGISOLE” sun breaker will be installed clip-on main supporting carriers installed each mm. 600 between the carriers are made of prepainted aluminium thickness mm. 1,00 and colour white on both sides.
TECHINICAL CARATHERISTICS OF THE LC 84 FRANGISOLE FOR OUTSIDE
TYPE LC 84
TYPE LS 84ribbed
MAIN SUPPORTING RUNNERS
15/45° 15/30°
MAIN SUPPORTING RUNNER TYPE
15/45°
STRIP LC 84
INDICATIVE MATERIAL INCIDENCE PER M2
Strip Type LC/45° LC/30° LS/45° LS/30°
Strips 11,54 14,50 (ml.)
Main Carriers 1,40 1,40 (Kg/mq.)
LINEAROPENFAÇADES-SUNBREAKERS
TO OBTAIN MORE SOUND ABSORBITION AND NOISE PROTECTION, THE LINEAR STRIPLES
AVAILABLE MICROPERFORATED Ø mm. 2
METALSCREEN®
37METALSCREEN® S.p.A. - Via Aldo Moro, 38 - 41030 Bomporto (MO) - Italy EU - Tel. +39 059/8170611 - Fax +39 059/8170633e-mail: [email protected] - www.metalscreen.it
All the designs, photos, logo and symbols, messagges and models of this catalogue is own property, of Metalscreen spa Modena - Italy the international laws covers and protects everythings
MICROPERFORATED Ø 2 mm. STRIPES
45° ANGLE 30° ANGLE
38
METALSCREEN®
METALSCREEN® S.p.A. - Via Aldo Moro, 38 - 41030 Bomporto (MO) - Italy EU - Tel. +39 059/8170611 - Fax +39 059/8170633e-mail: [email protected] - www.metalscreen.it
All the designs, photos, logo and symbols, messagges and models of this catalogue is own property, of Metalscreen spa Modena - Italy the international laws covers and protects everythings
TWIN LOCK ® METAL SUSPENSIONS T BAR SYSTEMS ANTISEISMIC LOCK FOR
EXPOSED LAY-IN CEILINGS
EXPOSEDGRIDLAY-INSYSTEMS“ANTISEISMICLOCK”STANDARD COLOUR: • WHITE STANDARD (RAL 9003)EXTRACOLOUR: •Black (RAL 9005) • Pearl white (RAL 1013) • Metallic Silver matt (RAL 9006) • Gold-Silver (mirror finishes)
38
24
38
15
Slots forhangers
Type RA.24.24 “BAIONETTA”Wallangle“L”mm.24x24sectionwithjointcoupling mm. 3000
Jointcoupling
Type RJC.11.12Joggleendeddeepstalkcross tee mm. 1200 x H 38
Type RJC.11.06Joggleendeddeepstalkcross tee mm. 600 x H 38
Type SM9mm. 19x9x9x19Shadow moulding Double “L” trimmm. 3000
Fireproofexpansion joint
Type RM.1.36Main runner “Fireproof” mm. 3600 x H 38
Rigid suspension
hangers steel type 100 +
metal snap type 23/D
Joggled
“Torsion proof”renforces
Traditional antiseismic joint lock ANGLE TRIM “L” SECTION
RIGIDTRIM ®
Type SM9Shadow moulding
Type RU-16 / RU-13Upstand trim “F” section
Type RA.24.24whit connector joint
30
15
16 - 1333
KINDLY ASK OFFER FOR FULL TRUCK OR CONTAINER
NUOVO
NEW
H = mm. 38all profiles
Main runners and cross tees
M
ET
AL
SU
SP
EN
SIO
N A
NT
ISE
ISM
IC L
OC
K E
XP
OS
ED
GR
ID L
AY
-IN
SY
ST
EM
•MINERALFIBERS•GYPSUMBOARD•PLASTERBOARD
METALSCREEN®
39METALSCREEN® S.p.A. - Via Aldo Moro, 38 - 41030 Bomporto (MO) - Italy EU - Tel. +39 059/8170611 - Fax +39 059/8170633e-mail: [email protected] - www.metalscreen.it
All the designs, photos, logo and symbols, messagges and models of this catalogue is own property, of Metalscreen spa Modena - Italy the international laws covers and protects everythings
TWIN LOCK ® METAL SUSPENSIONS T BAR SYSTEMS ANTISEISMIC LOCK FOR
EXPOSED LAY-IN CEILINGS
PERIMETRICAL WALL ANGLE “L” SECTION mm. 24x24 WITH CONNECTOR JOINT
• FAST INSTALLATION
• PERFECT ALIGNMENT
• AESTETIC BEST RESULT
NUOVO
NEW
M
ET
AL
SU
SP
EN
SIO
N A
NT
ISE
ISM
IC L
OC
K E
XP
OS
ED
GR
ID L
AY
-IN
SY
ST
EM
SELECTED STEEL MATERIAL - FIRST CHOICE - TOP QUALITYHot-dipped galvanized dry steel for BODY and pre-painted ALUMINIUM CORROSIONPROOF for CAP. Both of these material can meet with either ASTM or CNS standard and CE EN 13964:2004 - CE EN 14195:2005. Good quality of material can make sure the ceiling grid in qualified structure and loading ability when forming the body shape during the production process.Be carefully, make attention to all manufacturers that use the pre-painted galvanized steel for CAP that became yellow, change colour in short time and corrosion and dust damage seriously the stability of the grid system WARNING.Require the T bar grid system with the CAP made of pre-painted ALUMINIUM CORROSIONPROOF suitable also for external use and humidity wet place, swimming pools, sauna, steam bath, fitness centers and kitchens.
PLASTERBOARD GYPSUM BOARD
ACOUSTICAL MINERAL FIBERS
OPEN CELL SYSTEMS
PANELS SYSTEMS
40
METALSCREEN®
METALSCREEN® S.p.A. - Via Aldo Moro, 38 - 41030 Bomporto (MO) - Italy EU - Tel. +39 059/8170611 - Fax +39 059/8170633e-mail: [email protected] - www.metalscreen.it
All the designs, photos, logo and symbols, messagges and models of this catalogue is own property, of Metalscreen spa Modena - Italy the international laws covers and protects everythings G
AL
VA
NIZ
ED
PR
OF
ILE
S F
OR
GY
PS
UM
BO
AR
D W
AL
LS
AN
D C
EIL
ING
S
TEAM “K”GALVANIZED HOT DIPPED STEEL PROFILES FOR GYPSUM BOARD EUROPEAN TEST EN 13964:2004 - EN 14195:2005 “FIRST STEEL”
G50
G55
G75
G100
M50
M55
CHANNEL TRACK FOR WALLS mm. 50
Galvanized steel 0,6mm. 40x50x40
standard length mm. 3000
CHANNEL TRACK FOR WALLS mm. 55
Galvanized steel 0,6mm. 40x55x40
standard length mm. 3000
CHANNEL TRACK FOR WALLS mm. 75
Galvanized steel 0,6mm. 40x75x40
standard length mm. 3000
CHANNEL TRACK FOR WALLS mm. 100
Galvanized steel 0,6mm. 40x100x40
standard length mm. 3000
TYPE PROFILES DESCRIPTION TYPE PROFILES DESCRIPTION
VERTICAL STUD FOR WALLS mm. 75
Galvanized steel 0,6mm. 50x73.8x47
standard length mm. 3000
VERTICAL STUD FOR WALLS mm. 100
Galvanized steel 0,6mm. 50x98.8x47
standard length mm. 3000
SUPPORTING MAIN RUNNER FOR CEILINGS mm. 50
Galvanized steel 0,6mm. 27x48x27
round angles - sharp anglesstandard length mm. 3000
SUPPORTING SLIM MAIN RUNNER FOR CEILINGS mm. 50
Galvanized steel 0,6mm. 15x48x15
round angles - sharp anglesstandard length mm. 3000
WALL ANGLE PROFILE “L” SECTION
mm. 30x30 - mm 40x30Ribbed surface
Galvanized steel 0,6standard length mm. 3000
WALL EDGE“U” PROFILE “U” SECTION
mm. 30x28 - mm 30x16Galvanized steel 0,6
mm. 30x28.8x30 - mm. 30x16x30standard length mm. 3000
COVER CORNER PROFILE FOR WALLS
Perforated ribbed surfaceGalvanized steel 0,6
mm. 30x30standard length mm. 3000
PRIMARY MAIN CLICK RUNNER FOR PC 27-A 40x28Galvanized steel 0,7
mm. 40x28x40standard length mm. 4000
METAL SNAP ADJUSTMENT FOR SUSPENSION
OF MAIN RUNNER CLICK PROFILE TYPE PS
VERTICAL STUD FOR WALLS mm. 50
Galvanized steel 0,6mm. 50x48.8x47
standard length mm. 3000
VERTICAL STUD FOR WALLS mm. 55
Galvanized steel 0,6mm. 50x53.8x47
standard length mm. 3000
• All profiles are rollformed from hot dipped 1st galvanized steel DX51DZ• All profiles are tested and certified EN-ASTM• Extra standard lengths: can be customized upon customer request
COVER EDGESGalvanized steel 0,6
mm. 14x23standard length mm. 3000
COVER CORNER FLEX PROFILEGalvanized steel 0,6
mm. 25x36standard length mm. 3000
COVER EDGES FLEX PROFILEPrepainted white
mm. 14x23standard length mm. 3000
WHITE
23
14
36
25
23
14
LENGTH ON REQUEST
thicknessmm. 0,7
M75
M100
L3030L4030
U28U16
PAR 30
C23
PARAFLEX
COPRIFLEX
“U” PROFILE FLEXTYPE UFLEX28
mm. 28x30LENGTH mm. 3000
“U” PROFILE FLEXTYPE GFLEX50
mm. 50x40LENGTH mm. 3000
“U” PROFILE FLEXTYPE GFLEX75
mm. 75x40LENGTH mm. 3000
“L” PROFILE FLEXTYPE LFLEX75
mm. 75x40LENGTH mm. 3000
“L” PROFILE FLEXTYPE LFLEX50
mm. 50x40LENGTH mm. 3000
TYPE PARVAR PERFORATED CORNER PROFILE
VARIABLES ANGLE 180° LENGTH mm. 3000
PC27-APC27-S
PC15-APC15-S
PS
GPS
METALSCREEN®
41METALSCREEN® S.p.A. - Via Aldo Moro, 38 - 41030 Bomporto (MO) - Italy EU - Tel. +39 059/8170611 - Fax +39 059/8170633e-mail: [email protected] - www.metalscreen.it
All the designs, photos, logo and symbols, messagges and models of this catalogue is own property, of Metalscreen spa Modena - Italy the international laws covers and protects everythings
42
METALSCREEN®
METALSCREEN® S.p.A. - Via Aldo Moro, 38 - 41030 Bomporto (MO) - Italy EU - Tel. +39 059/8170611 - Fax +39 059/8170633e-mail: [email protected] - www.metalscreen.it
All the designs, photos, logo and symbols, messagges and models of this catalogue is own property, of Metalscreen spa Modena - Italy the international laws covers and protects everythings
METALSCREEN®
43METALSCREEN® S.p.A. - Via Aldo Moro, 38 - 41030 Bomporto (MO) - Italy EU - Tel. +39 059/8170611 - Fax +39 059/8170633e-mail: [email protected] - www.metalscreen.it
All the designs, photos, logo and symbols, messagges and models of this catalogue is own property, of Metalscreen spa Modena - Italy the international laws covers and protects everythings
41030 BOMPORTO MOdena- ITaly eUVia A. Moro, 38Tel. +39 059/8170611Fax +39 059/8170633Fax +39 059/8170632 [email protected]
PEACEFRIENDS
THE ALUMINIUM FALSE CEILINGIT IS NOT DANGEROUS FOR YOUR HEALTH
al• •
ALUM
INIUM IS RECYLABE
ALUMINIUM IS RECYLAB
E
BOMPORTO
eUROPean TeST aPPROVal EN 13964:2004 - EN 14195:2005
QualityManagementSystemOperatedUNI EN ISO 9001:2000
B U YI TA L I A NPRODUCTS
NO ASBESTOS
KINDLY ASK FOR OUR PRICES AND CONTACT US FOR ANY OTHER FURTHER CLEARIFICATION
How to meet us in MeTalSCReen:
a22 BRenneRO: EXIT CARPIDIRECTION TO: SOLIERA - SORBARA BOMPORTO INDUSTRIAL AREA
a1 (FROM nORTH): EXIT MODENA NORDDIRECTION TO: VERONA - MIRANDOLA BASTIGLIA - BOMPORTO INDUSTRIAL AREA
a1 (FROM SOUTH): EXIT MODENA SUDDIRECTION TO: FERRARA - CAMPOSANTOFINALE EMILIA - BOMPORTO INDUSTRIAL AREA
a13 (FROM eaST): EXIT FERRARA NORDDIRECTION TO: FINALE EMILIA - CENTOBOMPORTO INDUSTRIAL AREA
neaReST InTeRnaTIOnal aIRPORT: BOLOGNA G. MARCONI
We are dedicated manufacturing sustainable product. Our paint and aluminium melting processes are considered to be one of the industry standards in terms of clean production processes. All aluminium products are 100% recyclable at the end of their lifecycle.
MODENA IS A BEAUTIFUL AND QUIET CITY PLACED IN NORTH ITALY. IN MODENA WITHOTHERSLEADINGINDUSTRIAL COMPANY THERE IS THE FERRARI CAR FACTORY: THE MOST FAMOUS SPORTCARS OF THEWORLD.
MODENA
Bas
elito
s.r
.l. 1
0/20
09