fallstop - Act First Safety
Transcript of fallstop - Act First Safety
fallstopĀ®
safety equipment for work at heights
HarnessesVersafit . . . . . . . . . . . . . . . . . . . . 3-5Versafit with frontal attachment . . . 4Versafit ā Ladder . . . . . . . . . . . . . . 5Versafit ā Scaffold . . . . . . . . . . . . . 5Versafit ā Auto-lock . . . . . . . . . . . . 5Versafit ā Reflective . . . . . . . . . . . . 5Construction . . . . . . . . . . . . . . . . . . 6LeGrand combo . . . . . . . . . . . . . . . 6Ultra-light . . . . . . . . . . . . . . . . . . . . 7Kevlar. . . . . . . . . . . . . . . . . . . . . . . 7X-style . . . . . . . . . . . . . . . . . . . . . . 7TowerPro . . . . . . . . . . . . . . . . . . . . 8Derrick . . . . . . . . . . . . . . . . . . . . . . 8Promast . . . . . . . . . . . . . . . . . . . . . 9Proclimb . . . . . . . . . . . . . . . . . . . . . 9
AccessoriesTracvest . . . . . . . . . . . . . . . . . . . . 10Shoulder pads . . . . . . . . . . . . . . . 10D-r ing extender . . . . . . . . . . . . . . 10Bags. . . . . . . . . . . . . . . . . . . . . . . 10
BeltsTool belts . . . . . . . . . . . . . . . . . . . 10Back padded . . . . . . . . . . . . . . . . 10Padded . . . . . . . . . . . . . . . . . . . . . 10
LanyardsTracpac lightweight web. . . . . . . . 11Tracpac high-abrasion web . . . . . 11Tracpac extendible . . . . . . . . . . . . 11Tracpac shock absorbers . . . . . . . 11Stretchfor . . . . . . . . . . . . . . . . . . . 12F2-Stretchfor . . . . . . . . . . . . . . . . 12Extendfor . . . . . . . . . . . . . . . . . . . 12Tracpac Kevlar webbing . . . . . . . . 12Tracpac vinyl covered wire rope . . 12Tracpac self-retracting lanyard . . . 12High-abrasion web . . . . . . . . . . . . 13Tracpac 5ā8-in. (16 mm) rope . . . . . 13
Work-positioning assembliesAdjustfor. . . . . . . . . . . . . . . . . . . . 13Rebar chain assembly . . . . . . . . . 13Spreader bar . . . . . . . . . . . . . . . . 13
ConnectorsConnectors for lanyards . . . . . . . . 14
Fall protection kitsAerial lift kits . . . . . . . . . . . . . . . . 15Basic fall protection kit. . . . . . . . . 15
Tower climberās kitsBasic kit . . . . . . . . . . . . . . . . . . . . 15Deluxe kit . . . . . . . . . . . . . . . . . . . 15
Roofers kitsQuik-MountĀ® . . . . . . . . . . . . . . . . 16Quik-MountĀ® Lite . . . . . . . . . . . . . 16Reusable roofing anchor. . . . . . . . 16Heavy-duty hinged
D-ring roof anchor. . . . . . . . . . . 16Roof anchors . . . . . . . . . . . . . . . . 17
Soft anchorage connectorsAnchor slings . . . . . . . . . . . . . . . . 18Sling choker . . . . . . . . . . . . . . . . . 18Anchorage connector . . . . . . . . . . 18Wire rope slings . . . . . . . . . . . . . . 18Anchor straps . . . . . . . . . . . . . . . . 18Endless slings . . . . . . . . . . . . . . . 18
Hard anchorage connectorsBeam clamp . . . . . . . . . . . . . . . . . 19Beam trolley . . . . . . . . . . . . . . . . . 19BeamSlide . . . . . . . . . . . . . . . . . . 19Anchorage D-rings . . . . . . . . . . . . 19Ringsafe . . . . . . . . . . . . . . . . . . . . 19Door anchor bar . . . . . . . . . . . . . . 19Splice-safe . . . . . . . . . . . . . . . . . . 19First man up hook . . . . . . . . . . . . 19EZE-hook . . . . . . . . . . . . . . . . . . . 19
Rope grabsStopforĀ® . . . . . . . . . . . . . . . . . . . . 20GripgrabĀ® . . . . . . . . . . . . . . . . . . . 21Wire rope grab . . . . . . . . . . . . . . . 21
LifelinesPolyblend lifelines. . . . . . . . . . . . . 21Superline lifelines . . . . . . . . . . . . . 21Kernmantle lifelines . . . . . . . . . . . 21
Self-retracting lifelinesBlocforĀ® . . . . . . . . . . . . . . . . . . . . 2210 ft. (3 m) self-retracting web
lanyard with cover. . . . . . . . . . . 22
Load arrestorsBlocmat . . . . . . . . . . . . . . . . . . . . 23
Controlled-descent systemsDeropeĀ® systems . . . . . . . . . . 24-25Controlled-descent device . . . . . . 26Ascent/descent systems. . . . . . . . 26Left & right hand ascenders . . . . . 26Bags. . . . . . . . . . . . . . . . . . . . . . . 27Victim transfer pulley . . . . . . . . . . 27Evacuation seat . . . . . . . . . . . . . . 27Suspension loop . . . . . . . . . . . . . . 27Sternal ascent locking device . . . . 27Edge roller . . . . . . . . . . . . . . . . . . 27Petzl Vertex best helmet . . . . . . . . 27
Confined-space systemsStandard systems. . . . . . . . . . . . . 28Tracpode rescue systems . . . . . . . 28Motorized systems . . . . . . . . . . . . 28Standard tripods. . . . . . . . . . . . . . 29Tracpode rescue tripods . . . . . . . . 29Steel head pulley . . . . . . . . . . . . . 29Leg-mounting bracket . . . . . . . . . 29Work winches. . . . . . . . . . . . . . . . 29BlocforĀ® bi-directional
retrieval lifelines . . . . . . . . . . . . 29Spreader bar . . . . . . . . . . . . . . . . 29Bosunās chair . . . . . . . . . . . . . . . . 29Carrying bag for tripod . . . . . . . . . 29
PulleysPulleys . . . . . . . . . . . . . . . . . . . . . 30Rigging plate . . . . . . . . . . . . . . . . 30
Horizontal lifelines systemsStanchion . . . . . . . . . . . . . . . . . . . 31TirsafeĀ® . . . . . . . . . . . . . . . . . . . . 32FallprotecĀ® . . . . . . . . . . . . . . . . . . 33TravsafeĀ® Tempo . . . . . . . . . . . . . 33TravspringĀ® . . . . . . . . . . . . . . . 34-35TravsafeĀ® . . . . . . . . . . . . . . . . 36-37TravflexĀ® . . . . . . . . . . . . . . . . . 38-39
Ladder safety systemsFaba . . . . . . . . . . . . . . . . . . . . . . . 40Tracteliftā¢ . . . . . . . . . . . . . . . . . . . 41StopcableĀ® . . . . . . . . . . . . . . . . . . 41
Tieback anchorsU-bar . . . . . . . . . . . . . . . . . . . . . . 42Wall mounted . . . . . . . . . . . . . . . . 42
InformationsABCās of fall protection . . . . . . . . . 43CSA standards . . . . . . . . . . . . . . . 43Heavy workers . . . . . . . . . . . . . . . 43
TABLE OF CONTENTSTABLE OF CONTENTS
Pictures presented in this catalog are for illustrative purposes and this catalog is intended for general information only. For specific applications, contact Tractel Ltd.
VERSAFIT HARNESSVERSAFIT HARNESS
331.800.561.3229
Sizesā¢ Small, one-size, X-large and XX-large
Capacityā¢ 310 lbs. (140 kg), one person
Adjustable back D-ring
Shoulder padAvailable on all harnesses.
Shoulder D-ringFor rescue/retrieval operations.
Lanyard clipTo keep the lanyard arm out of theway when not in use, minimizing risk of tripping. Conveniently locatedon both chest strap keepers.
Frontal attachmentFor suspension and ladderclimbing applications.
Elastic keeperAllows excess webbing to be foldedand tucked into the keepers toprevent from getting tangled.
Plastic sliding keeperPositioned at the adjuster buckles toprevent the webbing from slippingout of adjustment.
Belt loopTo accomodate any Tractelremovable belt or your favoritetool belt up to 4 in. (10 cm) wide.
Stitch blockDone on programmable sewingmachines and are optimizedfor a maximum resistance. The orange thread allows for aquick visual inspection.
Adjustable sub-pelvic strapImproved comfort in case of afall arrest.
Spring-loaded adjuster buckleAdjusts and stays put.
Quick-connect leg
Side D-ringFor work positioningapplications.
Tongue and buckle leg
Upper sternum D-ringFor ladder climbing.
Visual fall indicator
Inspection tag andserial number
Auto-lockAvailable for chestand leg straps.
VERSAFIT HARNESSVERSAFIT HARNESS
44 1.800.561.3229
Suspension/DescentCSA Group D
Fall ArrestCSA Group A
Ladder ClimbingCSA Group L
PositioningCSA Group P
Restraint RetrievalCSA Group E
AC732 (shown)
ā¢ Quick-connect legsā¢ Back D-ring
AD732ā¢ Tongue & buckle legsā¢ Back D-ring
AC742ā¢ Quick-connect legsā¢ Back D-ringā¢ Side-positioning D-rings
AD742 (shown)
ā¢ Tongue & buckle legsā¢ Back D-ringā¢ Side-positioning D-rings
AC7122 (shown)
ā¢ Quick-connect legsā¢ Back D-ringā¢ Side D-ringsā¢ Frontal attachment
AD7122ā¢ Tongue & buckle legsā¢ Back D-ringā¢ Side D-ringsā¢ Frontal attachment
AC752 (shown)
ā¢ Quick-connect legsā¢ Back D-ringā¢ Shoulder retrieval D-rings
AD752ā¢ Tongue & buckle legsā¢ Back D-ringā¢ Shoulder retrieval D-rings
AC772 (shown)
ā¢ Quick-connect legsā¢ Back D-ringā¢ Shoulder retrieval D-ringsā¢ Side positioning D-rings
AD772ā¢ Tongue & buckle legsā¢ Back D-ringā¢ Shoulder retrieval D-ringsā¢ Side positioning D-rings
Frontal attachment
AC762 (shown)
ā¢ Quick-connect legsā¢ Back D-ringā¢ Frontal attachment
AD762ā¢ Tongue & buckle legsā¢ Back D-ringā¢ Frontal attachment
VERSAFIT HARNESSVERSAFIT HARNESS
551.800.561.3229
Suspension/DescentCSA Group D
Fall ArrestCSA Group A
Ladder ClimbingCSA Group L
PositioningCSA Group P
Restraint RetrievalCSA Group E
Reflective
AC3316 (shown)
ā¢ Quick-connect legsā¢ Back D-ringā¢ 3MĀ® reflective bands
AD3316ā¢ Tongue & buckle legsā¢ Back D-ringā¢ 3MĀ® reflective bands
Auto-lock
AT732ā¢ Automatic bucklesā¢ Back D-ring
AT742 (shown)
ā¢ Automatic bucklesā¢ Back D-ringā¢ Side positioning D-rings
Scaffold
AC732/D (shown)
ā¢ Quick-connect legsā¢ Back D-ring
Integrated shoulder padsā¢ Fixed chest strap
AD732/Dā¢ Tongue & buckle legsā¢ Back D-ring
Integrated shoulder padsā¢ Fixed chest strap
Exclusive feature
Ladder
AC722 (shown)
ā¢ Quick-connect legsā¢ Back D-ringā¢ Upper sternum D-ringā¢ Fixed chest strap
AD722ā¢ Tongue & buckle legsā¢ Back D-ringā¢ Upper sternum D-ringā¢ Fixed chest strap
CONSTRUCTION HARNESSCONSTRUCTION HARNESS
66 1.800.561.3229
FeaturesFive-point adjustment
ā¢ Spring loaded adjuster buckleā¢ Adjustable back D-ringā¢ Adjustable chest strap
Lanyard retaining clips on both shoulder straps
ā¢ Integrated shoulder pads
Fall indicators / inspection tag / serial number
ā¢ Padded back supportā¢ Removable tool belt accommodates
pouches
Exclusive feature
Sizesā¢ Small, medium, large, X-large
and XX-large
EBB95Lā¢ Tongue & buckle legsā¢ Tool beltā¢ Side-positioning D-rings
EQ56GXXLā¢ Quick-connect legsā¢ 3ā4-in. (19 mm) self-locking
snap hook
Featuresā¢ Accommodates weight range from
250 to 375 lbs. (113 to 170 kg)ā¢ Sewn Strechfor integral 41ā2 to 6 ft.
(1.4 to 1.8 m) shock-absorbing lanyardā¢ Maximum arrest force: 1,350 lbs. (6 kN)ā¢ Five-point adjustmentā¢ Adjustable back D-ringā¢ Adjustable chest strap
Lanyard retaining clips on both shoulder straps
Harness and lanyard fall indicators /inspection tag / serial number
Exclusive feature
Sizesā¢ XX-large and XXX-large
Suspension/DescentCSA Group D
Fall ArrestCSA Group A
Ladder ClimbingCSA Group L
PositioningCSA Group P
Restraint RetrievalCSA Group E
LEGRAND HARNESSLEGRAND HARNESS
ULTRA-LIGHT HARNESSULTRA-LIGHT HARNESS
771.800.561.3229
Featuresā¢ Integrated sub-pelvic strapā¢ Five-point adjustmentā¢ Adjustable back D-ringā¢ Adjustable chest strapā¢ Accommodates tool belt up to
four inches wide
Inspection tag / serial number
Exclusive feature
Sizesā¢ Small, one-size, X-large
and XX-large
Sizesā¢ Small, one-size and X-large
Sizesā¢ Small, one-size, X-large and XX-large
Suspension/DescentCSA Group D
Fall ArrestCSA Group A
Ladder ClimbingCSA Group L
PositioningCSA Group P
Restraint RetrievalCSA Group E
AC032 (shown)
ā¢ Quick-connect legsā¢ Back D-ring
AD032ā¢ Tongue & buckle legsā¢ Back D-ring
AC042ā¢ Quick-connect legsā¢ Back D-ringā¢ Side positioning D-rings
AD042ā¢ Tongue & buckle legsā¢ Back D-ringā¢ Side positioning D-rings
AC532ā¢ Quick-connect legsā¢ Back D-ring
AD532ā¢ Tongue & buckle legsā¢ Back D-ring
AC542ā¢ Quick-connect legsā¢ Back D-ringā¢ Side positioning D-rings
AD542 (shown)
ā¢ Tongue & buckle legsā¢ Back D-ringā¢ Side positioning D-rings
ACK03ā¢ Quick-connect legsā¢ Back D-ringā¢ KevlarĀ® thread for durability
ACK04 (shown)
ā¢ Quick-connect legsā¢ Back D-ringā¢ Side positioning D-ringsā¢ KevlarĀ® thread for durability
Kevlar is a registered trademark of Dupont
KEVLARĀ® HARNESS X-STYLE HARNESSKEVLARĀ® HARNESS X-STYLE HARNESS
TOWERPRO HARNESSTOWERPRO HARNESS
88 1.800.561.3229
Featuresā¢ Tongue & Buckle legs
Adjustable sub-pelvic strap
Seven-point adjustmentā¢ Back restraint D-ringā¢ Adjustable chest strap
Lanyard retaining clips on both shoulder straps
Fall indicators / inspection tag / serial number
ā¢ Wide back support with rearattachment
ā¢ Abdominal supportā¢ Incorporates saddle
Exclusive feature
Sizesā¢ Small, medium, large, X-large
and XX-large
FeaturesAdjustable sub-pelvic strap
Seven-point adjustment
Adjustable chest strap assemblyā¢ Fixed chest strap with sternum
D-ringā¢ Spring-adjuster buckleā¢ Padded back support with side
D-ringsā¢ Removable tool belt accommodates
pouchesā¢ Padded leg straps
Lanyard retaining clips on bothshoulder straps
Lanyard arm-positioning system
Fall indicators / inspection tag / serial number
Exclusive feature
Sizesā¢ Small, medium, large, X-large
and XX-largeBACK VIEW
BACK VIEW
Suspension/DescentCSA Group D
Fall ArrestCSA Group A
Ladder ClimbingCSA Group L
PositioningCSA Group P
Restraint RetrievalCSA Group E
FBBL/SAD (shown)
ā¢ Tongue & buckle legsā¢ Back D-ringā¢ Detachable rigid Pro-seat
saddle
FBBLā¢ Tongue & buckle legsā¢ Back D-ring
XSAD1
ā¢ Rigid Pro-seat saddle for harness
ā¢ Detachable
EHB02RLā¢ 2-ft. shock absorber
EHBF02RLā¢ 2-ft. shock absorberā¢ Frontal attachment
DERRICK HARNESSDERRICK HARNESS
PROMAST HARNESSPROMAST HARNESS
991.800.561.3229
BACK VIEW
BACK VIEW
FeaturesAuto-lock leg straps
Pull-down adjuster bucklesā¢ Waist D-ring attachmentā¢ Padded back support with side D-ringsā¢ Removable tool belt accommodates
pouchesā¢ Integrated shoulder padsā¢ Padded leg strapsā¢ Side tool loops
Lanyard retaining clips on bothshoulders
Lanyard arm retaining system
Fall indicators / inspection tag / serial number
Exclusive feature
Sizesā¢ Small, medium, large, X-large
and XX-large
Pro-seat saddle
Pro-seat saddle
FeaturesAuto-lock chest and leg straps
Pull-down adjuster buckles
Sternum and waist D-rings attachmentā¢ Padded back support with side D-ringsā¢ Removable tool belt accommodates
pouchesā¢ Integrated shoulder padsā¢ Padded leg strapsā¢ Side tool loops
Lanyard retaining clips on bothshoulders
Lanyard arm retaining system
Fall indicators / inspection tag / serial number
Exclusive feature
Sizesā¢ Small, medium, large, X-large
and XX-large
Suspension/DescentCSA Group D
Fall ArrestCSA Group A
Ladder ClimbingCSA Group L
PositioningCSA Group P
Restraint RetrievalCSA Group E
AC102L (shown)
ā¢ Tongue & buckle legsā¢ Back D-ring
AC1052Lā¢ Tongue & buckle legsā¢ Back D-ringā¢ Shoulder retrieval D-rings
XSAD1ā¢ Rigid Pro-seat saddle
for harnessā¢ Detachable
AC132L (shown)
ā¢ Tongue & buckle legsā¢ Back D-ring
XSAD1ā¢ Rigid Pro-seat saddle
for harnessā¢ Detachable
PROCLIMB HARNESSPROCLIMB HARNESS
ACCESSORIESACCESSORIES
1010 1.800.561.3229
WARNING: WAIST BELTS ARE PROHIBITED FOR FALL ARREST
Padded beltsā¢ 4 in. (102 mm) wideā¢ Thermal-formed padded back supportā¢ Tongue & buckle
BD932L
ā¢ Belt only (no D-ring)
BD942L
ā¢ Back restraint D-ring
BD952L (shown)
ā¢ Side-positioning D-rings
D-ring extenderXW2R
ā¢ Compatible with all FallstopĀ® harnesses
ā¢ Easy pass-through design
TracvestXVEST02
ā¢ Lightweight outer meshā¢ Breathable inner liner
snaps apart to accommodate harness
ā¢ Reflective stripping front and back
ā¢ Side storage pocketsā¢ Lanyard retaining clipā¢ D-ring extender keeperā¢ Washableā¢ Sizes: one-size and X-large
Shoulder padsXSPAD
ā¢ Compatible with all FallstopĀ® harnesses
ā¢ Easy to install and remove
BagsXB1116 (shown)
ā¢ Lightweight storage bagā¢ 11 x 16 in. (28 x 40 cm)
XB11163
ā¢ Heavy-duty storage bagā¢ 11 x 16 in. (28 x 40 cm)
XB0820 (shown)
ā¢ Carrying bag with handlesā¢ 8 x 20 in. (20 x 50 cm)
XB2111
ā¢ Carrying bag with handlesā¢ 11 x 11 x 21 in. (28 x 28 x 53 cm)
Back padded beltsā¢ 4 in. (102 mm) wideā¢ Polyester webbingā¢ Tongue & buckle
BD032L
ā¢ Belt only (no D-ring)
BD042L
ā¢ Back restraint D-ring
BD052L (shown)
ā¢ Side-positioning D-rings
Tool beltsā¢ 13ā4 in. (45 mm) wideā¢ Polyester webbingā¢ Tongue & buckle
BD832L (shown)
ā¢ Belt only (no D-ring)
BD842L
ā¢ Back restraint D-ring
BD852L
ā¢ Side-positioning D-rings
Sizesā¢ Small, medium, large, X-large and XX-large
BELTSBELTS
TRACPAC SHOCK-ABSORBING LANYARDSTRACPAC SHOCK-ABSORBING LANYARDS
11111.800.561.3229
PLEASE REFER TO PAGE 17 FOR ALL ADDITIONAL CONNECTORS
All lanyards are 6 ft. (1.8 m) and have a 3ā4-in. (19 mm) self-locking snap hook at shock pack end.
C1106G
C1126E
C196G
C106GZ
C106G
TRACPAC LIGHTWEIGHT SHOCK-ABSORBING LANYARDSAvailable lengths: 3, 4, 5 or 6 ft. (0.9, 1.2, 1.5 or 1.8 m) only.
C1106G with 3ā4-in. (19 mm) self-locking snap hook
C1106A with 15ā8-in. (41 mm) self-locking snap hook
C1106E with 21ā4-in. (57 mm) self-locking snap hook
C1126G two arms with 3ā4-in. (19 mm) self-locking snap hooks
C1126A two arms with 15ā8-in. (41 mm) self-locking snap hooks
C1126E two arms with 21ā4-in. (57 mm) self-locking snap hooks
TRACPAC HIGH-ABRASION SHOCK-ABSORBING LANYARDSAvailable lengths: 3, 4, 5 or 6 ft. (0.9, 1.2, 1.5 or 1.8 m) only except adjustable and tie-back models.
C106G with 3ā4-in. (19 mm) self-locking snap hook
C106C with 5ā8-in. (16 mm) 5,000-lbs. (22.2 kN) all-direction carabiner
C106A with 15ā8-in. (41 mm) self-locking snap hook
C106E with 21ā4-in. (57 mm) self-locking snap hook
C106GZ with tie-back and 3ā4-in. (19 mm) self-locking snap hook
C106EZ with tie-back and 21ā4-in. (57 mm) self-locking snap hook
C196G adjustable with 3ā4-in. (19 mm) self-locking snap hook
C196GZ adjustable with tie-back and 3ā4-in. (19 mm) self-locking snap hook
C126G two arms with 3ā4-in. (19 mm) self-locking snap hooks
C126C two arms with 5ā8-in. (16 mm) 5,000-lbs. (22.2 kN) all-directioncarabiners
C126A two arms with 15ā8-in. (41 mm) self-locking snap hooks
C126E two arms with 21ā4-in. (57 mm) self-locking snap hooks
C126GZ two arms with tie-back and 3ā4-in. (19 mm) self-locking snap hooks
C126EZ two arms with tie-back and 21ā4-in. (57 mm) self-locking snap hooks
C186G two adjustable arms with 3ā4-in. (19 mm) self-locking snap hooks
C186GZ two adjustable arms with tie-back and 3ā4-in. (19 mm) self-lockingsnap hooks
C186EZ two adjustable arms with tie-back and 21ā4-in. (57 mm) self-lockingsnap hooks
TRACPAC EXTENDIBLE SHOCK-ABSORBING LANYARDSextends from 41ā2 to 6 ft. (1.4 to 1.8 m)Available lengths: 4, 5 or 6 ft. (1.2, 1.5 or 1.8 m) only.
C206G with 3ā4-in. (19 mm) self-locking snap hook
C206A with 15ā8-in. (41 mm) self-locking snap hook
C206E with 21ā4-in. (57 mm) self-locking snap hook
C226G two arms with 3ā4-in. (19 mm) self-locking snap hooks
C226A two arms with 15ā8-in. (41 mm) self-locking snap hooks
C226E two arms with 21ā4-in. (57 mm) self-locking snap hooks
C226PM two arms with 21ā2-in. (64 mm) self-locking snap hooks
TRACPAC SHOCK-ABSORBERSC002RG 20 in. (50 cm) with a D-ring and a 3ā4-in. (19 mm) self-locking snap
hook
C002G 24 in. (60 cm) with 3ā4-in. (19 mm) self-locking snap hooks
C126C
C206G
C226E
C002RG
SHOCK-ABSORBING LANYARDSSHOCK-ABSORBING LANYARDS
1212 1.800.561.3229
All lanyards are 6 ft. (1.8 m) and have a 3ā4-in. (19 mm) self-locking snap hook at one end.
This combination shock absorber offers the ātear outā absorption principle ofthe standard Tracpac with that of a retractable lifeline. The lightweight self-retracting lanyard is permanently attached to the soft pack giving it greaterflexibility while at the same time allowing for full 6 ft. (1.8 m) of travel.
C056O
ā¢ 6 ft. (1.8 m) self-retracting lanyardā¢ Shock-absorbing lanyardā¢ 3ā4-in. (19 mm) locking swivel snap hook both ends
PLEASE REFER TO PAGE 17 FOR ALL ADDITIONAL CONNECTORS
C506G
C5Y06G
C526E
C706G
TRACPAC SELF-RETRACTING LANYARDTRACPAC SELF-RETRACTING LANYARD
C0K6G
C306G
STRETCHFOR SHOCK-ABSORBING LANYARDSreduces tripping hazardsAvailable length: stretchable from 41ā2 to 6 ft. (1.4 to 1.8 m) only.
C506G with 3ā4-in. (19 mm) self-locking snap hook
C506A with 15ā8-in. (41 mm) self-locking snap hook
C506E with 21ā4-in. (57 mm) self-locking snap hook
C526G two arms with 3ā4-in. (19 mm) self-locking snap hooks
C526A two arms with 15ā8-in. (41 mm) self-locking snap hooks
C526E two arms with 21ā4-in. (57 mm) self-locking snap hooks
F2-STRETCHFOR SHOCK-ABSORBING LANYARDSallows to tie off at your feet when overhead anchor is not availableAvailable length: stretchable from 41ā2 to 6 ft. (1.4 to 1.8 m) only.
C5Y06G with 3ā4-in. (19 mm) self-locking snap hook
C5Y06E with 21ā4-in. (57 mm) self-locking snap hook
C5Y26G two arms with 3ā4-in. (19 mm) self-locking snap hook
C5Y26E two arms with 21ā4-in. (57 mm) self-locking snap hook
EXTENDFOR SHOCK-ABSORBING LANYARDSreduces impact forceAvailable lengths: 4, 5 or 6 ft. (1.2, 1.5 or 1.8 m) only.
C706G with 3ā4-in. (19 mm) self-locking snap hook
C706A with 15ā8-in. (41 mm) self-locking snap hook
C706E with 21ā4-in. (57 mm) self-locking snap hook
C726G two arms with 3ā4-in. (19 mm) self-locking snap hooks
C726A two arms with 15ā8-in. (41 mm) self-locking snap hooks
C726E two arms with 21ā4-in. (57 mm) self-locking snap hooks
KEVLAR SHOCK-ABSORBING LANYARDSAvailable lengths: 4, 5 or 6 ft. (1.2, 1.5 or 1.8 m) only.
C0K6G with 3ā4-in. (19 mm) self-locking snap hook
CK906G vinyl covered wire rope lanyard with Kevlar covered shock absorberand 21ā4-in. (57 mm) self-locking snap hook
VINYL COVERED WIRE ROPE SHOCK-ABSORBING LANYARDSAvailable lengths: 4, 5 or 6 ft. (1.2, 1.5 or 1.8 m) only.
C306G with 3ā4-in. (19 mm) self-locking snap hook
C326G two arms with 3ā4-in. (19 mm) self-locking snap hooks
C496G
LANYARDSLANYARDS
13131.800.561.3229
HIGH-ABRASION WEB LANYARDSAvailable lengths: 3, 4, 5 or 6 ft. (0.9, 1.2, 1.5 or 1.8 m) only except adjustable models.
C606G with 3ā4-in. (19 mm) self-locking snap hook
C606A with 15ā8-in. (41 mm) self-locking snap hook
C606E with 21ā4-in. (57 mm) self-locking snap hook
C696G adjustable with 3ā4-in. (19 mm) self-locking snap hook
5ā8-IN. (16 MM) ROPE LANYARDSAvailable lengths: 3, 4, 5 or 6 ft. (0.9, 1.2, 1.5 or 1.8 m) only except adjustable models.
C406G with 3ā4-in. (19 mm) self-locking snap hook
C406A with 15ā8-in. (41 mm) self-locking snap hook
C406E with 21ā4-in. (57 mm) self-locking snap hook
C496G adjustable with 3ā4-in. (19 mm) self-locking snap hook
VINYL COVERED WIRE ROPE LANYARDfor work positioning onlyAvailable lengths: 3, 4, 5 or 6 ft. (0.9, 1.2, 1.5 or 1.8 m) only.
C906G with 3ā4-in. (19 mm) self-locking snap hook
PLEASE REFER TO PAGE 17 FOR ALL ADDITIONAL CONNECTORS
AdjustforWork-positioning rope lanyard
CSP1560
ā¢ 6-ft. x 5ā8-in. (1.8 m x 16 mm) lanyard
ā¢ Quick adjustment with one-hand operation and friction-bend positioning
ā¢ Abrasion-resistant sleeveā¢ Lightweight
Spreader barV6652
ā¢ Forged steel auto-lockingsnap hooks
ā¢ 8-in. (20 cm) widthbetween hooks
Rebar chain assemblyV61WE
ā¢ 21ā4 in. (57 mm) with swivel link hook
ā¢ Swivel assemblyā¢ All self-locking hooksā¢ Overall length: 25 in. (63.5 cm)
C606G
C906G
C406G
WORK-POSITIONING ASSEMBLIESWORK-POSITIONING ASSEMBLIES
All lanyards are 6 ft. (1.8 m) and have a 3ā4-in. (19 mm) self-locking snap hook at one end.
CONNECTORS FOR LANYARDSCONNECTORS FOR LANYARDS
1414 1.800.561.3229
45000 (G)
ā¢ Die-cut steelā¢ 3ā4-in. (19 mm) opening
43100 (U)
ā¢ Die-cut steelā¢ 21ā4-in. (57 mm) opening
435013 (P)
ā¢ Aluminiumā¢ 3ā4-in. (19 mm) opening
4634 (E)
ā¢ Forged steelā¢ 21ā4-in. (57 mm) opening
45960 (M)
ā¢ Forged aluminiumā¢ 21ā2-in. (64 mm) opening
PM11 (C1)
ā¢ Alloy steelā¢ 3ā4-in. (19 mm) openingā¢ Breaking strength: 5,000 lbs. (22.2 kN)
P209
ā¢ Polished aluminiumā¢ 3ā4-in. (19 mm) openingā¢ Breaking strength: 6,750 lbs. (30 kN)ā¢ Gate strength: 1,800-lbs. (8 kN)
P773 (Q)
ā¢ Alloy steelā¢ 1-in. (25 mm) openingā¢ Breaking strength: 10,000 lbs. (44.4 kN)ā¢ Captive eye pin included
P407 (TT)
ā¢ Alloy steelā¢ 23ā32-in. (53 mm) openingā¢ Breaking strength: 7,200 lbs. (32 kN)ā¢ Captive eye pin included
All lanyards come standard with 3ā4-in. (19 mm) die-cut steel self-locking snap hook (#45000 ā G) at each end.Choose your connector in the list below by changing the last letter by the one in brackets.
4033032 (O)
ā¢ Die-cut steelā¢ 3ā4-in. (20 mm) openingā¢ Swivel
43200 (A)
ā¢ Die-cut steelā¢ 15ā8-in. (41 mm) opening
44651 (V)
ā¢ Forged steelā¢ 3ā4-in. (19 mm) openingā¢ Swivelā¢ Visual fall indicator
P307 (T)
ā¢ Alloy steelā¢ 2-in. (50 mm) openingā¢ Breaking strength: 9,000 lbs. (40 kN)ā¢ Captive eye pin included
P4333 (C)
ā¢ Forged steelā¢ 5ā8-in. (16 mm) openingā¢ Breaking strength: 10,000 lbs. (44.4 kN)ā¢ 5,000-lbs. (22.2 kN) gate
FALLSTOP FALL PROTECTION KITSFALLSTOP FALL PROTECTION KITS
15151.800.561.3229
Aerial lift kitsEAC06G (shown)
ā¢ Phoenix harnessā¢ Sewn 6-ft. (1.8 m)
shock-absorbing lanyardā¢ Storage bag (XB1116)ā¢ Also available in 4-ft. (1.2 m) model
EAC06G-NB
ā¢ Phoenix harnessā¢ Sewn 6-ft. (1.8 m)
shock-absorbing lanyardā¢ Also available in 4-ft. (1.2 m) model
Basic fall-protection kitKITC-B01
ā¢ Ultra-light harness (AC032)ā¢ 6-ft. (1.8 m) shock-absorbing lanyardā¢ Carrying and storage bag (XB1116)
TOWER CLIMBERāS KITSTOWER CLIMBERāS KITS
Basic kitKIT-TCB
ā¢ TowerPro harness (FBBL)ā¢ Tie-back lanyard (C126EZ)ā¢ Work-positioning lanyard (CSP1560)ā¢ Petzl helmet (K3A06)ā¢ Tractel gear bag (XB2111)
Deluxe kitKIT-TCD
ā¢ TowerPro harness (FBBL)ā¢ Pro-seat saddle (XSAD1)ā¢ Tie-back lanyard (C126EZ)ā¢ Work-positioning lanyard (CSP1560)ā¢ StopforĀ® S 5ā8-in. (16 mm) rope grab (WS58)ā¢ Quick-draw lanyard (CL02G)ā¢ 3ā8-in. (9.5 m) wire rope grab with carabiner (WN38)ā¢ Petzl helmet (K3A06)ā¢ Tractel gear bag (XB2111)
QUIK-MOUNTĀ®ROOFERS KITSQUIK-MOUNTĀ®ROOFERS KITS
1616 1.800.561.3229
Quik-MountĀ® Lite roofing kitsā¢ Phoenix harnessā¢ StopforĀ® B rope grab and 3-ft. (0.9 m)
shock-absorbing lanyard combinationā¢ Superline lifelineā¢ One reusable roof anchorā¢ Pack of anchoring screwsā¢ Supplied in a pail
N0525S
ā¢ 25-ft. (7.6 m) system
N0550S
ā¢ 50-ft. (15 m) system
Quik-MountĀ® roofing kitsā¢ Versafit harness (AC732)ā¢ StopforĀ® S rope grab and 2-ft. (0.6 m)
shock-absorbing lanyard combination (D5812G)ā¢ Superline lifelineā¢ One reusable roof anchorā¢ Pack of anchoring screwsā¢ Supplied in a pail
N0325S (shown)
ā¢ 25-ft. (7.6 m) system
N0335S
ā¢ 32-ft. (10.7 m) system
N0350S
ā¢ 50-ft. (15 m) system
Reusable roofing anchorN105B
ā¢ Box of five anchorsā¢ With screws
Heavy-duty hinged D-ring roof anchor428103S
ā¢ With screws
ROOF ANCHORSROOF ANCHORS
17171.800.561.3229
Standing seam roof anchorThe Standing Seam Roof Clamp provides continuousprotection and freedom of movement on flat or slopedseamed roofs. Provides a 360Āŗ swivel mount for use withretractable lifeline. Adjustable for metal roof seams 24, 30, 32and 36 in. (60, 75, 80 and 90 cm).
N650
ā¢ For metal roof
Flat metal roof anchorThe flat metal roof anchor provides continuous protection and360Āŗ freedom of movement on Type B & Type R roof deckingas well as flat metal roofs. Itās lightweight and screw downinstallation allow for quick easy installation.
N640
ā¢ For metal roof
Adjustable/swivel ridge anchorMount this anchor at the peak of the roof, put up to a 50 ft.(15 m) self-retracting lifeline in the 360Āŗ swiveling basket andwork both sides of the roof without having to move theanchor. This anchor is the ultimate in flexibility, and with itsdurable powder coated steel finish will provide years oftrouble free service.
N630
ā¢ For wood roof
Screw down roof anchorThe Screw Down Roof Anchor has a 360Āŗ swiveling basket tohold up to 50 ft. (15 m) retractable lifeline. This convenientsetup keeps the self-retracting lifeline off the roof and rotatingfreely for greater ease of movement. Lightweight andportable, this anchor provides a quick solution to your fallprotection needs.
N620
ā¢ For wood roof
Tile roof anchor pointThis unique anchor was designed specifically for Tile Roofapplications. The permanently mounted anchor connectsdirectly to the roof truss and provides a ladder mountingJ-hook as well as a 5,000 lbs. (22.2 kN) lifeline anchoragepoint.
N666638
ā¢ For tile roof
All wood and metal roof anchors accomodate BlocforĀ® 20, 30 and 50 ft. (6, 9 and 15 m).
SOFT ANCHORAGE CONNECTORSSOFT ANCHORAGE CONNECTORS
1818 1.800.561.3229
Anchor strapsā¢ Rated 5,000 lbs. (22.2 kN)ā¢ Made of nylon webbingā¢ 31ā2 ft. (1.1 m)
V41803
ā¢ For structural memberā¢ With loop
V41813 (shown)
ā¢ For structural memberā¢ D-ring
V41823
ā¢ For rebar steelā¢ Protective sleeveā¢ Loop
V41833
ā¢ For rebar steelā¢ Protective sleeveā¢ D-ring
Wire rope slingsā¢ 6 ft. x 1ā4 in. (1.8 m x 6 mm)ā¢ Vinyl covered
V4172
ā¢ Wire rope sling
V41906
ā¢ 3ā4-in. (19 mm) self-locking snap hook
ā¢ O-ring
Endless slingsV41321
ā¢ 18-in. (0.5 m) endless sling
V41323 (shown)
ā¢ 3-ft. (0.9 m) endless sling
V41326
ā¢ 6-ft. (1.8 m) endless sling
Anchor slingsā¢ Pass-through D-ringā¢ Rated 5,000 lbs. (22.2 kN)ā¢ Made of polyester webbingā¢ Heavy duty back pad
V4136
ā¢ 15-in. (0.4 m) length
V4135 (shown)
ā¢ 3-ft. (0.9 m) length
V4165
ā¢ 6-ft. (1.8 m) length
Anchorage connectorThe purpose of the shock absorber is to lower theimpact forces caused by the fall.
ā¢ Made of a 13ā4-in. (45 mm) lightweightcontinuous web
ā¢ Shock absorber covered with a tubular sleeveā¢ 21ā4-in. (57 mm) snap hookā¢ D-ring connector
V41PRE
ā¢ Anchorage connector
Sling chokerā¢ Rated 5,000 lbs. (22.2 kN)ā¢ Made of polyester webbing
V4115
ā¢ 15-in. (0.4 m) length
V4172V41906
EZE-hookFirst man-up system, ideal for climbingladders and towers.ā¢ Available with hand grip or
telescopic poles
V30A (shown)
ā¢ With pole adapter
V30U
ā¢ With universal electrical poleadapter
V1816A
ā¢ Fiberglass pole 8 to 16 ft. (2.4 to 4.9 m)
V1824A
ā¢ Fiberglass pole 8 to 24 ft. (2.4 to 7.3 m)
HARD ANCHORAGE CONNECTORSHARD ANCHORAGE CONNECTORS
19191.800.561.3229
Beam clampV5009
ā¢ Fits I-beam from 3 to 91ā4 in.(76 to 235 mm)
ā¢ Screw-down adjustment
Door anchor barV62217SA
ā¢ Door or window anchor pointā¢ Very fast and easy to set upā¢ Up to 43 in. (1.1 m) wideā¢ Shock-pack included
BeamSlideSliding beam anchor
V5002
ā¢ Fits I-beam from 4 to 14 in.(100 to 355 mm)
ā¢ Autolocking positioning knobā¢ Steel rollers allow for smooth
travel.
Beam trolleyV5019
ā¢ Fits I-beam from 25ā16 to 811ā16 in.(59 to 220 mm)
ā¢ Screw-down adjustmentā¢ Locking nut
Anchorage D-ringsV4230 (shown)
ā¢ Screw typeā¢ 1ā2-in. (13 mm) N.C. 13 thread
V4232*
ā¢ Clearance hole for 1ā2-in. (13 mm) bolt
V4238*
ā¢ Clearance hole for 5ā8-in. (16 mm) bolt
* attachment connectors not supplied
RingsafePermanent anchor point with built-in fall indicator.
V076299
ā¢ With 3ā4 in. (19 mm)autolocking carabiner
ā¢ Breaking strength:5,000 lbs. (22.2 kN)
ā¢ Lightweight, sleek profileā¢ Easy to install, inspect
and maintain
First man up hookIdeal for specialized high reachanchor placement.
V3106117 (shown)
ā¢ First man up remote hook
V1106697 (shown)
ā¢ Fiberglass poleā¢ With adapter for hook
assemblyā¢ Extends from 8 to 20 ft.
(2.4 to 6 m)ā¢ Weight: 5.9 lbs. (2.69 kg)
V148C
ā¢ Fiberglass poleā¢ With carabinerā¢ Extends from 4 to 8 ft.
(1.2 to 2.4 m)
Splice-safeComplies with 5,000 lb. (22.2 kN)minimum strength rating without aneye splice.
ā¢ Provides field termination spliceā¢ Use on 5ā8 and 3ā4-in. (16 and
19 mm) 3-strand ropeā¢ Use on 7ā16 and 1ā2-in. (11 and
13 mm) Kenmantle ropeā¢ Lightweight and re-usable
V4260
ā¢ Without carabiner
V4260C1 (shown)
ā¢ With PM11 carabiner
STOPFORĀ®ROPE GRABSSTOPFORĀ®ROPE GRABS
2020 1.800.561.3229
StopforĀ® S trailing rope grabThis lightweight, anticorrosive design features an independent rollerthat allows the grab to travel freely on the rope. The spring-loaded,cam-locking system insures that the grab engages during a fall.
ā¢ Spring-loaded cam-locking systemā¢ Gravity washer to prevent upside-down installationā¢ Easy hinge loading anywhere on lifelineā¢ Stainless steel constructionā¢ 5ā8-in. (16 mm) three-strand rope diameter
D5812G (shown)
ā¢ 2 ft. x 1-in. (0.6 m x 25 mm) shock absorber as required by CSAā¢ 3ā4-in. (19 mm) self-locking snap hook
D5862G
ā¢ 2-ft. (0.6 m) web as required by CSAā¢ 3ā4-in. (19 mm) self-locking snap hook
StopforĀ® B trailing rope grabThe StopforĀ® B is a lightweight hands-free grab. The unique design providesa roll over cam brake technology which applies breaking pressure to thelifeline in the event of a fall yet allows unprecedented mobility whentravelling, extending rope life.
ā¢ Lightweightā¢ Anti-reversability provided by gravity pinā¢ Anti-panic function with roll-over cam brakeā¢ 5ā8-in. (16 mm) three-strand rope diameterā¢ Meets CSA Z259.2.1-98 (R04), class ADP
WB58
ā¢ Standard unit
WB58P (shown)
ā¢ With park feature
StopforĀ® A advanced trailing rope grabFeatures an independent triggering stop that provides a back up braking system. Inthe event of a fall, speed activated teeth will force the foot to engage on the rope.This new braking system also ensures that the rope grab will lock on the lifelineeven if the cam lever is held beyond its non-engaged position.
ā¢ Spring-loaded cam-locking systemā¢ Gravity washer to prevent upside-down installationā¢ Easy hinge loading anywhere on lifelineā¢ Stainless steel constructionā¢ 5ā8-in. (16 mm) three-strand rope diameter
WA58 (shown)
ā¢ Dual braking system
StopforĀ® M manual rope adjusterThe StopforĀ® M is a rope adjuster that is specially designed to protectworkers from falling when working on a sloping plane, such as roofs. It canalso be incorporated into a travel-restraint or a work-positioning system.
ā¢ Spring-loaded cam-locking systemā¢ Gravity washer to prevent upside-down installationā¢ Easy hinge loading anywhere on lifelineā¢ Stainless steel constructionā¢ 5ā8-in. (16 mm) three-strand rope diameter
D5M12G (shown)
ā¢ 2 ft. x 1-in. (0.6 m x 25 mm) shock absorber as required by CSAā¢ 3ā4-in. (19 mm) self-locking snap hook
D5M62G
ā¢ 2-ft. (0.6 m) web as required by CSAā¢ 3ā4-in. (19 mm) self-locking snap hook
ROPE GRABSROPE GRABS
21211.800.561.3229
Superline lifelinesā¢ 5ā8-in. (16 mm) diameterā¢ Breaking strength: 11,500 lbs. (51.2 kN)
G8058
ā¢ Bulk ā 1,200-ft. (365 m) spools
GSāN*
ā¢ Nylon thimble only
GSāNG*
ā¢ 3ā4-in. (19 mm) snap hook
GSāNE*
ā¢ 21ā4-in. (57 mm) snap hook
Polyblend lifelinesā¢ 5ā8-in. (16 mm) diameterā¢ Breaking strength: 6,500 lbs. (28.9 kN)
G9058
ā¢ Bulk ā 600 and 1,200-ft. (180 and 365 m) spools
GBāN*
ā¢ Nylon thimble only
GBāNG*
ā¢ 3ā4-in. (19 mm) snap hook
GBāNE*
ā¢ 21ā4-in. (57 mm) snap hook
Bulk Kernmantle lifelinesG70716
ā¢ 7ā16-in. (11 mm) diameterā¢ Breaking strength: 7,500 lbs.
(33.3 kN)
G7012
ā¢ 1ā2-in. (13 mm) diameterā¢ Breaking strength: 8,200 lbs.
(36.4 kN)
* Replace āāā in part number withdesired length in feet. Standard lengths:25, 50, 100, 200, 300 and 400 ft.
ā¦N ā¦NG ā¦NE
LIFELINESLIFELINES
GripgrabĀ® rope grabThe GripgrabĀ® is a cam lever single jaw rope grab designed to movefreely along a synthetic lifeline. The rope grab protects the workerwhile climbing up and down.
ā¢ 3ā4-in. (19 mm) diameter three-strand ropeā¢ Locking pin installation systemā¢ Quick and easy to installā¢ 2-in. (50 mm) attachment ring
D3412G
ā¢ 2 ft. x 1-in. (0.6 m x 25 mm) shock absorberā¢ 3ā4-in. (19 mm) self-locking snap hook
D3462G
ā¢ 2-ft. (0.6 m) webā¢ 3ā4-in. (19 mm) self-locking snap hook
Wire rope grabsThe wire rope grab is meant to be incorporated in a personal fallprotection system where synthetic lifelines would degrade due tochemical, abrasive or high-heat conditions.
D51612G
ā¢ Gravity lever prevents upside down installationā¢ Used on 5ā16 in. (8 mm) diameter wire ropeā¢ 2 ft. x 1-in. (0.6 m x 25 mm) shock absorberā¢ 3ā4-in. (19 mm) self-locking snap hookā¢ Carabiner
BLOCFORĀ®SELF-RETRACTING LIFELINESBLOCFORĀ®SELF-RETRACTING LIFELINES
2222 1.800.561.3229
Part # Length Casing
With Galvanized Steel Wire Rope
RT20G 20 ft. (6 m) Polyamide 6/ABS
RT30G 30 ft. (9 m) Polyamide 6/ABS
RT50G 50 ft. (15 m) Polyamide 6/ABS
RT75G 75 ft. (23 m) Cast aluminium
RT100G 100 ft. (30 m) Cast aluminium
With Stainless Steel Wire Rope
RT20S 20 ft. (6 m) Polyamide 6/ABS
RT30S 30 ft. (9 m) Polyamide 6/ABS
RT50S 50 ft. (15 m) Polyamide 6/ABS
RT75S 75 ft. (23 m) Cast aluminium
RT100S 100 ft. (30 m) Cast aluminium
With Synthetic Rope
RT30R 30 ft. (9 m) Polyamide 6/ABS
RT50R 50 ft. (15 m) Polyamide 6/ABS
RT100R 100 ft. (30 m) Cast aluminium
Optional Upper Swivel Attachment
Add ā/SWā to the end of the code
Featuresā¢ Sleek and durable housingsā¢ Lightweightā¢ Integrated carrying handlesā¢ Easy to handle
Synchronized twin inertia-braking pawlsā¢ Constant triggering speed regardless
of positionā¢ Isolated spring and braking
mechanism made of anti-corrosive and anti-sparking materials
ā¢ Impact-indicating snap hookā¢ Rubber recoil bumper
Tamper proof connector assemblyincluding carabiner
Exclusive feature
Standardsā¢ CSA Z259.2.2ā¢ ANSI Z359.1ā¢ OSHA requirement for fall protection
Optional Swivel
10-ft. (3 m) self-retracting web lanyard with coverRN9QO
ā¢ Autolocking carabinerā¢ Fall indicator foldā¢ 3ā4-in. (19 mm) self-locking snap hook
BlocforĀ® self-retracting lifeline withsynthetic webRS20WSA
ā¢ 3ā4-in. (19 mm) synthetic webā¢ Length: 20-ft. (6 m)ā¢ Polyamide casingā¢ Compact and lightweight
BLOCMAT LOAD ARRESTORSBLOCMAT LOAD ARRESTORS
23231.800.561.3229
Part # Length Wire rope Capacity
RBF1150 50 ft. (15 m) 1ā4 in. (6 mm) 1,100 lbs. (500 kg)
RBF1180 80 ft. (24 m) 1ā4 in. (6 mm) 1,100 lbs. (500 kg)
RBF1750 50 ft. (15 m) 5ā16 in. (8 mm) 1,700 lbs. (770 kg)
RBF1780 80 ft. (24 m) 5ā16 in. (8 mm) 1,700 lbs. (770 kg)
RBF2232 32 ft. (9.7 m) 3ā8 in. (9.5 mm) 2,200 lbs. (1,000 kg)
RBF2280 80 ft. (24 m) 3ā8 in. (9.5 mm) 2,200 lbs. (1,000 kg)
Part # Length Wire rope Capacity
RBS1150 50 ft. (15 m) 1ā4 in. (6 mm) 1,100 lbs. (500 kg)
RBS1180 80 ft. (24 m) 1ā4 in. (6 mm) 1,100 lbs. (500 kg)
RBS1732 32 ft. (9.7 m) 5ā16 in. (8 mm) 1,700 lbs. (770 kg)
RBS1765 65 ft. (19.8 m) 5ā16 in. (8 mm) 1,700 lbs. (770 kg)
RBS2225 25 ft. (7.6 m) 3ā8 in. (9.5 mm) 2,200 lbs. (1,000 kg)
RBS2240 40 ft. (12 m) 3ā8 in. (9.5 mm) 2,200 lbs. (1,000 kg)
RBS2280 80 ft. (24 m) 3ā8 in. (9.5 mm) 2,200 lbs. (1,000 kg)
Part # Length Capacity
RB530 30 ft. (9 m) 550 lbs. (250 kg)
RB550 50 ft. (15 m) 550 lbs. (250 kg)
Blocmat 250The Blocmat 250 is a retractable load arrestor. The length of the wire ropeis adjusted automatically by a tensioning and retraction system. The loadarrestor Blocmat 250 has been designed to secure suspended loads. It isfitted with large handles for lifting and carrying.
Blocmat S ā Suspended typesThe Blocmat S is a suspended type of material load arrestor. It is composedof an automatic fall-arrest device and a rope-reeling drum, both fixed on areliable rectangular fixing plate.
Blocmat SI ā Floor-mounted typesThe Blocmat SI has been designed to secure suspended loads. This rangeshall be fixed in a floor-mounted position and used with an upper returnsheave. It is composed of an automatic fall-arrest device and a rope-reeling drum, both fixed on a reliable rectangular fixing plate.
DEROPEĀ®CONTROLLED-DESCENT EVACUATION/RESCUE SYSTEMSDEROPEĀ®CONTROLLED-DESCENT EVACUATION/RESCUE SYSTEMS
2424 1.800.561.3229
Featuresā¢ Easy to use, requires minimum trainingā¢ Automatically controls rate of descentā¢ Descent speed of 138 ft./min. (42 m/min.)
Capable of multi-person rescues
Available with hand crank winch for limited liftingā¢ Meets ANSI Z359.4ā¢ CSA certified model available.
Contact us for more information.
Exclusive feature
All DeropeĀ® kits include:ā¢ DeropeĀ® unitā¢ 3-ft. (0.9 m) anchor sling (V4135)ā¢ 2-in. (50 mm) carbon steel autolocking carabiner
rated 9,000 lbs. (40 kN) (P307)ā¢ J-knife (KSOS)ā¢ Rescue/rope bag (XB23144 or XB26168)
Part # Description
DeropeĀ® model T
KC7200/TK 200 ft. (60 m) DeropeĀ® rescue system
KC7300/TK 300 ft. (91 m) DeropeĀ® rescue system
KC7400/TK 400 ft. (121 m) DeropeĀ® rescue system
KC7500/TK 500 ft. (152 m) DeropeĀ® rescue system
KC7600/TK 600 ft. (182 m) DeropeĀ® rescue system
DeropeĀ® model A with hand crank
KC7200/AK 200 ft. (60 m) DeropeĀ® rescue system
KC7300/AK 300 ft. (91 m) DeropeĀ® rescue system
KC7400/AK 400 ft. (121 m) DeropeĀ® rescue system
DeropeĀ® model KT
KC7100/KTK 100 ft. (30 m) DeropeĀ® rescue system
KC7200/KTK 200 ft. (60 m) DeropeĀ® rescue system
KC7300/KTK 300 ft. (91 m) DeropeĀ® rescue system
DeropeĀ® model Up E kits include:ā¢ DeropeĀ® unit with mounted ladder adapterā¢ Adjustable lanyard including two PM11 carabiners
(D58M98)ā¢ Edge Roller (K072586K)ā¢ T-bar (K5TBAR/K)ā¢ StopforĀ® A 5ā8-in. (16 mm) rope grab (WA58)ā¢ 6-ft. anchor sling (V4172)ā¢ Rescue bag (XB26168)
Part # Description
KC7230/WK 230 ft. (70 m) DeropeĀ® rescue system
KC7280/WK 280 ft. (85 m) DeropeĀ® rescue system
KC7330/WK 330 ft. (100 m) DeropeĀ® rescue system
Semi dry semi-static Kernmantle ropeā¢ Evacuation recommended length of rope: 1 x the
height to evacuateā¢ Rescue recommended length of rope:
2 x the height to evacuate
Part # Description
GC7S9 3ā8-in. (9 mm) Kernmantle rope
DEROPEĀ®CONTROLLED-DESCENT EVACUATION/RESCUE SYSTEMSDEROPEĀ®CONTROLLED-DESCENT EVACUATION/RESCUE SYSTEMS
25251.800.561.3229
Model T
ā¢ Up to 1,300 ft. (400 m) ofdescent for one person
ā¢ Up to 330 ft. (100 m) ofdescent for two persons
Model A
ā¢ Up to 1,300 ft. (400 m) of descent for one person
ā¢ Up to 330 ft. (100 m) of descent for two persons
ā¢ Gives ability to winch a person up to a maximum of 26 ft. (8 m)
Model Up E
ā¢ Up to 1,300 ft. (400 m) of descent for one person
ā¢ Up to 330 ft. (100 m) of descent for two persons
ā¢ Bracket enables the user to securethe DeropeĀ® on ladder rings
ā¢ Gives ability to winch a person up to a maximum of 26 ft. (8 m)
Model KT
ā¢ Up to 650 ft. (200 m) ofdescent for one person
ā¢ Up to 330 ft. (100 m) ofdescent for two persons
CONTROLLED-DESCENT DEVICECONTROLLED-DESCENT DEVICE
2626 1.800.561.3229
Featuresā¢ Manually operated, raising and loweringā¢ Requires 10 lbs. (4.5 kg) of force to hold a
220-lb. (100 kg) loadā¢ 4:1 mechanical advantage
Anti-reversing lock, activates in descent modeā¢ Positioning ascenderā¢ 7ā16-in. (11 mm) diameter Kernmantle ropeā¢ Optional 1ā2-in. (13 mm) diameter Kernmantle
rope available
Exclusive feature
K50S25
ā¢ 25-ft. (7.6 m) system
K50S50
ā¢ 50-ft. (15 m) system
K50S75
ā¢ 75-ft. (23 m) system
K50S100
ā¢ 100-ft. (30 m) system
Designed for controlled descent, work access and rescue for general industry, maintenance and confined space applications.
D4 descenderControlled-descent device with safety descent levercontaining dual brake mechanism for accidentalrelease or panic grab.
K6013572
ā¢ Standard: EN 340, class A (exceeds CSA Z259.2.3-99 and ANSI Z359.3-06
ā¢ Rope diameter: 3ā8 to 1ā2 in. (9 to 13 mm)ā¢ Hinged side plate to facilitate riggingā¢ Aluminium alloy sheavesā¢ Stainless steel side plates
ASCENT-DESCENT SYSTEMSASCENT-DESCENT SYSTEMS
Left & right hand ascendersFor rope ascension or specialty riggingapplications used within rope access andrescue practices.
ā¢ Standard: EN 567 (Mountaineeringequipment)
ā¢ Rope diameter: 3ā8 to 1ā2 in. (9 to 13 mm)ā¢ Aluminium alloyā¢ Breaking strength: 3,375 lbs. (15 kN)
K3020492
ā¢ Right ascender handle
K3020502
ā¢ Left ascender handle
ACCESSORIESACCESSORIES
27271.800.561.3229
BagsXB23144
ā¢ Medium
XB26168
ā¢ Large
Suspension loopK6FL6A
ā¢ For post-fall suspension
Evacuation seatDesigned for evacuations with controlleddescent devices. Elastic shoulder straps forcontrolled donning.
K5HT9
ā¢ For one personā¢ One size fits most
Sternal ascent locking deviceFor rope ascension within rope access, caving, or otherspecialty arenas of ascending fixed lines.
K3017632
ā¢ Standard: EN 567 (Mountaineering equipment)ā¢ Rope diameter: 3ā8 to 1ā2 in. (9 to 13 mm)ā¢ Aluminium alloyā¢ Breaking strength: 3,375 lbs. (15 kN)
Edge rollerEdge protection for use on industrial structures.
K072586K
ā¢ Aluminium alloy
Petzl Vertex best helmetK3A16
ā¢ Thermoformed plastic
Other accessoriesXC1600-NF
ā¢ Pelican case
KSOS (shown)
ā¢ J-knife
K5TBAR/K
ā¢ T-bar handle
K8DC01
ā¢ Daisy chain
Victim transfer pulleyā¢ 4:1 mechanical advantage
K9TRPS
ā¢ Two carabinersā¢ Bag
XB2410
ā¢ Bag for victim transfer pulley
CONFINED SPACE SYSTEMSCONFINED SPACE SYSTEMS
2828 1.800.561.3229
Motorized systemā¢ Electrically powered or pneumatic lifting and
lowering with the approved TirakĀ® hoistā¢ Can be controlled from the top by an operator
well away from the dangerā¢ In case of a main power failure, there is a
manually operated handle with integrated braketo lift the work seat back to the top.
Note: Must be used with independent fall-protection equipment.
Accessing confined spaces involves a number of life-threatening hazards. These may include the possibility of a fall or the occurrence ofbeing overcome by fumes or gases. Tractel's confined-space access and rescue systems are designed to provide a safe means of accessinga confined space area. In an emergency, confined-space systems allow the rescuers to retrieve the injured or unconscious workers withoutexposing themselves to similar potential hazards.
Tripod Bi-directional retrieval WinchPart # Description T3I10 T3I102 T1T50G T1T100G T2T50G T2T100G
T51T50G Confined-Space System One ā 50 ft. (15 m) x x
T51T100G Confined-Space System One ā 100 ft. (30 m) x x
T52T50G Confined-Space System Two ā 50 ft. (15 m) x x x
T52T100G Confined-Space System Two ā 100 ft. (30 m) x x xAll the above systems include required mounting brackets and carrying bags.
Tracpode rescue systemsTwo-person capacity with sheaves above tripod head to allow moreclearance under the tripod for secure operation.
Bi-directional RetractableTripod retrieval Winch lifeline
Part # Description T3S7 T1T50G T1T100G T2S50G T2S100G RT50G RT100G
T51F50G Confined-Space System One ā 50 ft. (15 m) x x
T51F100G Confined-Space System One ā 100 ft. (30 m) x x
T52F50G Confined-Space System Two ā 50 ft. (15 m) x x x
T52F100G Confined-Space System Two ā 100 ft. (30 m) x x x
T53F50G Confined-Space System Three ā 50 ft. (15 m) x x x
T53F100G Confined-Space System Three ā 100 ft. (30 m) x x xAll the above systems include required head pulleys, mounting brackets and carrying bags.
Standard systems
T52F50G
T51T50G
Part # Description
T5301P TirakĀ® XSE 301P motorized hoist, 220 V singlephase 35 ft./min. (10.5 m/min.) with BlocstopĀ®
overspeed device, reeler 200 ft. (60 m), end ofrope sensor and upper limit switch
T3I10K Aluminium tripod with support for TirakĀ®
T919908 Silo seat with safety belt
T970829 Non rotative wire rope, 200 ft. (60 m)
CONFINED SPACE SYSTEMSCONFINED SPACE SYSTEMS
29291.800.561.3229
Steel head pulleyā¢ Easy to installā¢ Pulley with sealed ball bearingā¢ Pulley supplied with carabiner
K3040102
ā¢ Steel head pulley
PM11
ā¢ 3ā4-in. (19 mm) alloy steel carabiner
Work winchesā¢ Galvanized steel wire rope lengths of
50, 100 or 200 ft. (15, 30 or 60 m)ā¢ Tripod mounting bracket included
T2S50G
ā¢ 50-ft. (15 m) work winch
T2S100G
ā¢ 100-ft. (30 m) work winch
T2S200G
ā¢ 200-ft. (60 m) work winch
Work winch must be used with a backup fall-arrest system.
BlocforĀ® bi-directional retrieval lifelinesWhile the retracting capability of the unit provides freedom ofmovement and fall protection, the device can be easily converted toa recovery device to rescue injured or unconscious worker.
Part # Length Wire rope Casing
T1T50G 50 ft. (15 m) Galvanized steel Polyamide 6/ABS
T1T100G 100 ft. (30 m) Galvanized steel Cast aluminium
T1T50S 50 ft. (15 m) Stainless steel Polyamide 6/ABS
T1T100S 100 ft. (30 m) Stainless steel Cast aluminium
Standard tripodsā¢ Telescopic aluminium tripodā¢ Minimum breaking strength:
5,000 lbs. (22.2 kN)ā¢ Two forged steel anchor eyes
T3F7 (shown)
ā¢ 7-ft. (2.1 m) tripod
T3F9
ā¢ 9-ft. (2.7 m) tripod
Tracpode rescue tripodsā¢ 8-ft. (2.4 m) adjustable aluminium tripodā¢ Min. breaking strength: 10,000 lbs. (44.4 kN)ā¢ Steel head pulleyā¢ Anchor eyeā¢ Non-slip feet for indoor surfaces
T3I10
ā¢ With single-head pulley
T3I102 (shown)
ā¢ With two-head pulley
Spreader barT9YL2
ā¢ Web 2 ft. (0.6 m)
Bosun's chairQ207B
ā¢ 12 x 24-in. (0.3 x 0.6 m) seatā¢ Integrated belt*
* Standard is medium, specify for other size.
Leg-mounting bracketT90B4
ā¢ For BlocforĀ® retrieval lifeline
Carrying bag for tripodXB15105
ā¢ For up to 10-ft. (3 m) tripodā¢ 105 x 15 x 15 in.
(267 x 38 x 38 cm)
PULLEYSPULLEYS
3030 1.800.561.3229
S pulley (fixed side plates)Technical rigging applications for light to mediumloads and personnel. Ideal use within arboriculturalclimbing systems or guided descent evacuation.
K3040162
ā¢ Single sheave: 11ā16 in. (27 mm)ā¢ Breaking strength: 4,500 lbs. (20 kN) direct ā¢ Dimension: 33ā16 x 21ā8 in. (81 x 55 mm)ā¢ Rope diameter: 3ā8 to 1ā2 in. (9 to 13 mm)ā¢ Aluminium alloy
M pulley (rotating side plates)Technical rigging applications for light to mediumloads and personnel.
K3040102
ā¢ Single sheave: 25ā16 in. (59 mm)ā¢ Rotating side plates (inline positioning)ā¢ Breaking strength: 6,300 lbs. (28 kN) direct ā¢ Dimension: 411ā16 x 33ā16 in. (119 x 82 mm)ā¢ Rope diameter: 5ā16 to 5ā8 in. (8 to 16 mm)ā¢ Aluminium alloy
Double pulley (rotating side plates)Technical short hoist pulley systems for mediumloads and personnel.
K3040112
ā¢ Rotating side plates (inline positioning)ā¢ Breaking strength: 5,400 lbs. (24 kN) direct ā¢ Dimension: 55ā8 x 33ā16 in. (144 x 82 mm)ā¢ Rope diameter: 5ā16 to 5ā8 in. (8 to 16 mm)ā¢ Aluminium alloy
In-line double pulley For guided Descent or Tyrolean traverse systems.
K3040092
ā¢ Single sheave x 2: 25ā16 in. (59 mm)ā¢ Breaking strength: 6,750 lbs. (30 kN) direct ā¢ Dimension: 47ā16 x 33ā8 in. (113 x 86 mm)ā¢ Rope diameter: 5ā16 to 1ā2 in. (8 to 13 mm)ā¢ Aluminium alloy
Rigging plateSuitable for most rigging applications.
K3020512
ā¢ Standard: EN 759 B (Anchorage device)ā¢ Aluminium alloyā¢ Breaking strength: 6,750 lbs. (30 kN) direct ā¢ Dimension: 77ā8 x 57ā16 in. (200 x 150 mm)
S pulley (rotating side plates)Technical rigging applications for light to mediumloads and personnel.
K3040172
ā¢ Single sheave: 11ā16 in. (27 mm)ā¢ Rotating side plates (inline positioning)ā¢ Breaking strength: 4,500 lbs. (20 kN) direct ā¢ Dimension: 33ā16 x 21ā8 in. (81 x 55 mm)ā¢ Rope diameter: 3ā8 to 1ā2 in. (9 to 13 mm)ā¢ Aluminium alloy
ALL PULLEYS COMPLY WITH STANDARD EN 12278
STANCHIONSTANCHION
31311.800.561.3229
Featuresā¢ Lightweight and portableā¢ Installs quicklyā¢ Can be used on perimeter of buildingā¢ Two-person tie off, up to 60 ft. (18.3 m)ā¢ Mounts at a 19Āŗ angle from the base, out of
the way of workers walking steelā¢ Attaches to beam with top mounted bolts and
safety chain ā¢ No drilling or weldingā¢ No web straps to deteriorateā¢ No ratchets to break or threaded rods to loseā¢ No tie-back cables or loose piecesā¢ Can be used as intermediate or end
stanchion
H8100
ā¢ Single stanchion
TIRSAFEĀ®TEMPORARY HORIZONTAL LIFELINE SYSTEMSTIRSAFEĀ®TEMPORARY HORIZONTAL LIFELINE SYSTEMS
3232 1.800.561.3229
The TirsafeĀ® device adds new energy-absorbing technology to any Horizontal LifelineSystem (HLL). With the unitās unique features, it allows for quicker and more reliableinstallations while at the same time provides the industries first fully re-usable HLLEnergy Absorber.
The system is designed to accommodate up to three workers to travel along a 65 ft.(20 m) single span or up to 300-ft. (90 m) multi-spans and reduces line deflection toapproximately seven feet.
Upon impact force, the TirsafeĀ® device is simply sent back to an authorized servicecenter, similar to Self Retracting Lifelines, for repairs and re-certification. The TirsafeĀ®
HLL Energy Absorber is simply the easiest, most reliable and cost-effective system onthe market today.
T3 TirforĀ®
TirsafeĀ®
FeaturesBuilt-in tension indicator
ā¢ Impact indicator
Re-settable by authorized servicecenter
Three users per single spanā¢ Single spans up to 65 ft. (20 m)
Multi spans up to 300 ft. (90 m)
Minimal line deflectionā¢ Lightweight and quick installationā¢ Sold separately or as complete system
Exclusive feature
āFederal, state and provincial regulations require that horizontallifelines are to be designed, installed and used under the supervisionof a qualified person, and as part of a complete fall-arrest systemwhich maintains a safety factor of at least two.ā
Refer to OSHA 1926.502 (d) (8) & CSA Z259.13-04
The T3 TirforĀ® unit is a continuous locking jaw tensioningdevice. Used along with the TirsafeĀ® Horizontal LifelineSystem, it provides a fast and easy method for tensioningany horizontal lifeline. The unit is sold separately or aspart of a complete TirsafeĀ® system and makes installingand moving horizontal systems quick and effortless.
Part # Description
TirsafeĀ® Unit
H088159 TirsafeĀ® unit only
System with Turnbuckle
H365001 65-ft. (20 m) system
H310001 100-ft. (30 m) system
System with T3 TirforĀ®
H41001 100-ft. (30 m) system
H41501 150-ft. (45 m) system
H42001 200-ft. (60 m) system
H43001 300-ft. (90 m) system
Turnbuckle
78JWT8L Turnbuckle
Tension indicator
Impact indicator
FALLPROTECĀ®TEMPORARY HORIZONTAL WIRE ROPE LIFELINESFALLPROTECĀ®TEMPORARY HORIZONTAL WIRE ROPE LIFELINES
33331.800.561.3229
Tractel's horizontal wire rope lifeline system is a low-stretch, single line system. Suspendedbetween two approved anchorage points, the system provides worker fall protection duringhorizontal movement. Strong, lightweight and quick to install, the system utilizes very few partsto increase safety and ease installation. The lifeline tension and adjustment is performed usinga turnbuckle tensioner. The shock-absorbing device included in the system contributes to reducesubstantially the maximum impact load on the anchorage points, thus reducing damage to thesystem.
ā¢ Shock-absorbing deviceā¢ 3ā8-in. (9.5 mm) wire rope lifelineā¢ Jaw/jaw turnbuckle tensionerā¢ Two autolocking carabinersā¢ Two travel forged O-rings
H23001
ā¢ 30-ft. (9 m) system
H26001
ā¢ 60-ft. (18 m) system
The TravsafeĀ® Tempo Synthetic Horizontal Lifeline System utilizes a low-stretch polyesterwebbing that provides a simple and lightweight solution to temporary horizontal fall-arrestapplications. The 60-ft. (18 m) system offers minimal line deflection and utilizes a heavy-duty,tie-down type ratchet device that provides quick and easy tensioning to the system. The systemis designed for two users and comes complete with anchorage straps, auto-locking carabiners,traveling O-rings and storage bag.
H636768
ā¢ Two anchor slings (V4165)ā¢ Two carabiners (PM11)ā¢ Two travel O-rings (47700)ā¢ Storage bag
PM11
47700V4165
TRAVSAFEĀ® TEMPO TEMPORARY HORIZONTAL WEB LIFELINETRAVSAFEĀ® TEMPO TEMPORARY HORIZONTAL WEB LIFELINE
TRAVSPRINGĀ®HORIZONTAL LIFELINE SYSTEMTRAVSPRINGĀ®HORIZONTAL LIFELINE SYSTEM
3434 1.800.561.3229
Featuresā¢ Intermediate anchors every
50 ft. (15 m)ā¢ Easy to install, no special tools
requiredā¢ Visible in-line tension indicatorā¢ Single line wire rope available
in stainless steel (optionalgalvanized wire rope)
ā¢ Unlimited system lengthā¢ Meets all OSHA, ANSI and
CSA standards
The TravspringĀ® horizontal lifeline provides an economical solution to your fallprotection needs. All components can be installed using common tools and thesystem can be used both in a temporary environment or can be installedpermanently. The TravspringĀ® is a proximity system meaning that the user mustmanipulate the lanyard to traverse through anchor points.
TravspringĀ® is an engineered system that requires design by Tractel certifiedinstallers.
End anchorJ3666848
ā¢ Stainless steel
Energy absorberJ3666688
ā¢ Supplied with quick linkā¢ Stainless steel
Tension indicatorJ3666858
ā¢ Stainless steel
TurnbuckleJ3640742
ā¢ Stainless steel
TRAVSPRINGĀ®HORIZONTAL LIFELINE SYSTEMTRAVSPRINGĀ®HORIZONTAL LIFELINE SYSTEM
35351.800.561.3229
Intermediate supportJ3666868
ā¢ One every 50 ft. (15 m) apartā¢ Stainless steel
Corner kitJ3666878
ā¢ Includes two turning pointanchors and a guide tube
ā¢ Stainless steel
CableJ370090000
ā¢ 5ā16-in. (8 mm) diameterā¢ Galvanized or stainless steel
Wire rope clip442905
ā¢ For 5ā16-in. (8 mm) wire ropeā¢ 3 required per extremity
Applicationsā¢ Roof tops without guard rails
or high parapetsā¢ Bridges and viaductsā¢ Overhead cranesā¢ Construction sites without
parapets
TRAVSAFEĀ®PERMANENT HORIZONTAL LIFELINE SYSTEMTRAVSAFEĀ®PERMANENT HORIZONTAL LIFELINE SYSTEM
3636 1.800.561.3229
The TravsafeĀ® permanent horizontal lifeline provides a permanent engineeredsolution to your fall protection needs. These permanent systems are designedand installed by Travsafe certified representatives and have custom designedsolutions to meet the site-specific requirements. The TravsafeĀ® twin wire ropehorizontal lifeline system allows smooth travel compared to single line systems.The twin wire ropes allow the traveller to sit true and move freely over theintermediate anchors, minimizing wear and eliminating user resistance. Theuserās hands remain free to perform their work task. When properly designedand installed, the system meets all OSHA, ANSI and CSA requirements.
TravsafeĀ® is an engineered system that requires design and installation byTractel certified installers.
Featuresā¢ Intermediate anchors every
50 ft. (15 m)ā¢ Ease of travel over anchorsā¢ Wire ropes available in stainless
or galvanized steelā¢ Travellerās jaws close tightly
around the lines if a fall occursā¢ Unlimited system lengthā¢ When using the Rollsafe traveller
can accomodate up to a 50-ft.(15 m) self-retracting lifeline in an overhead application
ā¢ Meets all OSHA, ANSI and CSA standards
TRAVSAFEĀ®PERMANENT HORIZONTAL LIFELINE SYSTEMTRAVSAFEĀ®PERMANENT HORIZONTAL LIFELINE SYSTEM
37371.800.561.3229
Regular
Rollsafe
Removable
TravellersThe travellers have minimal moving parts and are made out of stainless steel. Theymove effortlessly over the anchors and around corners. The Regular traveller fitsonto the system at the end anchors, the Removable traveller can be installed at anypoint along the sytem. The Rollsafe traveller is used in overhead applications.
Stainless steelend anchor
Aluminiumend anchor
Stainless steelintermediate anchor
Aluminiumintermediate anchor
Anchors
Applicationsā¢ Roof tops without guardrails or
high parapetsā¢ Aircraft hangers to allow
airplane serviceā¢ Bridges and viaductsā¢ Overhead cranesā¢ Catwalks without sidesā¢ Arena rafters
TRAVFLEXĀ®PERMANENT HORIZONTAL LIFELINE SYSTEMTRAVFLEXĀ®PERMANENT HORIZONTAL LIFELINE SYSTEM
3838 1.800.561.3229
Featuresā¢ Intermediate anchors every
50 ft. (15 m)ā¢ Ease of travel over anchorsā¢ Wire ropes available in stainless
steel (optional galvanized wirerope)
ā¢ Travellerās jaws close tightlyaround the lines if a fall occurs
ā¢ Unlimited system lengthā¢ Meets all OSHA, ANSI and
CSA standards
Regular
Removable
TravellersThe travellers have minimal moving parts and are made out of stainless steel. Theymove effortlessly over the anchors and around corners. The Regular traveller fitsonto the system at the end anchors, the Removable traveller can be installed at anypoint along the sytem.
TRAVFLEXĀ®PERMANENT HORIZONTAL LIFELINE SYSTEMTRAVFLEXĀ®PERMANENT HORIZONTAL LIFELINE SYSTEM
39391.800.561.3229
TravflexĀ®
end anchorTravflexĀ®
intermediate anchorTravflexĀ®
corner kit
Applicationsā¢ Metal roof buildingā¢ Structures that require smaller
efforts
The all-new TravflexĀ® permanent horizontal lifeline system provides workerswith a complete fall protection solution without restricting movement while onthe job. The system has been designed for use on light structures that cannotwithstand the loading of conventional horizontal systems. It is based on ourpopular TravsafeĀ® system and utilizes many of the same parts. The TravflexĀ® canbe attached to steel deck roofs using self-taping screws or it can clamp ontocertain types of standing seam roofs.
TravflexĀ® is an engineered system that requires design and installation by Tractelcertified installers.
FABA RIGID RAIL LADDER SAFETY SYSTEMFABA RIGID RAIL LADDER SAFETY SYSTEM
4040 1.800.561.3229
The Faba rigid rail ladder safety system is a fall protection system which can beinstalled onto an existing ladder or it can be supplied with a ladder and the completesystem. It is available in galvanized steel, stainless steel or aluminum. The asymetricrail prevents the rail grab from being inserted in the wrong direction. It has shortlocking distances which mean a minor impact on the body.
Applicationsā¢ Wind power plantsā¢ Antennas and lighting pylonsā¢ Chimneys
A12 steel rail profile
ā¢ Easy and quick installationā¢ Available in galvanized or
stainless steelā¢ Short locking distancesā¢ Available with foldable rungsā¢ Rail grab cannot be inserted in
wrong direction
AL2 aluminium rail profile
ā¢ Short locking distancesā¢ Rail grab cannot be inserted
incorrectly
TRACTELIFTā¢TRACTELIFTā¢
41411.800.561.3229
Wire rope 5ā16 in. (8 mm) 3ā8 in. (9.5 mm)
Standard systems with galvanized steel wire rope* LT516 LT3820 ft. (6 m) L1T20 L1T820200 ft. (60 m) L1T200 L1T8200
Standard systems with* stainless steel wire rope LT516 LT3820 ft. (6 m) L1T20S L1T820S200 ft. (60 m) L1T200S L1T8200S* Other lengths available from 20 to 200 ft. (6 to 60 m) by multiple of 10 ft. (3 m).Note: System does not include ladder.
Featuresā¢ Integrated shock absorber in upper bracket
reducing forces on ladderā¢ Adjustable on most permanent laddersā¢ No special tools required for installationā¢ Includes:
ā Wire ropeā Wire rope adjusterā Upper bracket with integrated shock
absorberā Lower bracket
The Tracteliftā¢ system is a continuous climbing aid that reduces theworkers weight while climbing through the use of a motorized pulleysystem. The motor exerts a constant pulling force of 88 lbs. (40 kg) to thebody while ascending or descending fixed ladders reducing climbingfatigue. The system incorporates an internal āclutchā that stops the ropetravel when the climber stops to rest or dismount the systems.
Note: The Tracteliftā¢ does not provide fall arrest protection and must be used in conjunctionwith a ladder safety system.
Integrated shockabsorber
STOPCABLEĀ®LADDER SAFETY SYSTEMSSTOPCABLEĀ®LADDER SAFETY SYSTEMS
TIEBACK ANCHORSTIEBACK ANCHORS
4242 1.800.561.3229
U-barThe standard U-bar safety tieback anchorsare the economical solution for securingsafety lifelines or equipment lines for fallprotection and suspended work.
Wall mountedWhen tiebacks are required on roofs wherewaterproofing or flashing is not an option,Tractel's wall-mounted U-bar tiebackanchors provide a simple, inexpensivesolution.
Tiebacks form a system that must be engineered and designed. Different models available. Please contact us for more information.
TRS1800S and TRS2400S models TRT1200S and TRT1800S models
U-bar ā Ćø3ā4 in. (19 mm), stainless steel, type 304
Galvanized steel pipe support, Ćø4 in. (101 mm)
Optional rigidinsulation
Optional flashing
Field weld 5ā16 in. (8 mm)
Top of buildingstructural steel
5,400 lbs. (24 kN) ultimate load any direction
Structure to withstand applied loading by others
18 in. (457 mm) ā TRS1800S OR24 in. (609 mm) ā TRS2400S
23ā8 in. (60 mm)
5,400 lbs. (24 kN) ultimate load any direction
U-bar ā Ćø3ā4 in. (19 mm), stainless steel, type 304
Galvanized steel pipe support, Ćø4 in. (101 mm)
Optional rigidinsulation
Optional flashing
2 threaded rods centered(3ā4 in. [19 mm] UNC āSS304 threaded rodcomplete with 3ā4 in.[19 mm] UNC double nuts)
Structure to withstand applied loading by others
23ā8 in. (60 mm)
12 in. (304 mm) ā TRT1200S OR18 in. (457 mm) ā TRT1800S
4 in. (101 mm) min.7 in. (177 mm) max.
51ā4 in. (133 mm) min.21ā4 in. (57 mm) max.
TRE1200S and TRE1800S models TRM1200S and TRM1800S models
U-bar ā Ćø3ā4 in. (19 mm), stainless steel, type 304
Galvanized steelpipe support,Ćø4 in. (101 mm)
Optional rigidinsulation
Optional flashing
Structure to withstand applied loading by others
5,400 lbs. (24 kN) ultimate load any direction
Single U-anchor bolt centered (3ā4 in. UNC āSS304 threaded rodcomplete with double nuts
23ā8 in. (60 mm)
5in
.(1
27m
m)
6in
. min
.15
2m
m)
12 in. (304 mm) ā TRE1200S OR18 in. (457 mm) ā TRE1800S
5,400 lbs. (24 kN) ultimate load any direction
U-bar ā Ćø3ā4 in. (19 mm), stainless steel, type 304
Galvanized steel pipe support, Ćø4 in. (101 mm)
Optional rigidinsulation
Optional flashing
Optional 4 adhesiveanchors hilti (HVAm20x240) centered(m20 ā SS304 threadedrod complete with m20double nuts)
Structure to withstand appliedloading by others
23ā8 in. (60 mm)
611ā16
in.
(170
mm
)
8in
. min
.(2
03m
m)
12 in. (304 mm) ā TRM1200S OR18 in. (457 mm) ā TRM1800S
8 in. (203 mm)
8 in. (203 mm)
11 in. (280 mm) SQ11 in. (280 mm) SQ
11 in. (280 mm) SQ
8 in. (203 mm)
ABCāS OF FALL PROTECTIONABCāS OF FALL PROTECTION
43431.800.561.3229
ā¢ Full body harness Z259.10-06ā¢ Energy absorbers and lanyards Z259.11-05ā¢ Body belts and saddles for work positioning and travel restraint Z259.1-05ā¢ Connecting components for personal fall arrests Z259.12-01ā¢ Descent control devices Z259.2.3-99ā¢ Design of active fall protection Z259.16-04
CSA fall protection definitions
Harnesses
Class A: Fall arrestDesigned to support the body during and after the arrest of a fall
Class D: Suspension and controlled descentDesigned for suspension or controlled descent from a height
Class E: Limited accessDesigned to support a worker in a position that reduces the workerās profile during passage through a limited access area.
Class L: Ladder climbingDesigned for use with fall restrict systems involving the use of a class AS or FRL fall arrester that travels on a vertical lifeline or rail as described in CSA-Z259.2.1
Class P: Work positioningDesigned to position the worker during a work operation
Personal energy absorbers and energy absorbing lanyardsCreation of two distinct weight classifications for persons working at height using personal fall arrest systems:
ā¢ Class E4: Standard 900-lbs. energy absorber or energy absorbing lanyard intended for general use in fall arrest systems. Persons between 100 and 254 lbs. Elongation of 3.9 ft.
ā¢ Class E6: Heavyweight 1,350-lbs. energy absorber or energy absorbing lanyard intended for use in fall arrest systems where the user is heavier. Persons between 200 and 386 lbs. Elongation of 5.7 ft.
The standard shock absorbers that Tractel sells are designed to absorb a 900-lbs, fall arrest force. The current test methods are conductedand designed around the workers weight of 310 lbs. (140 kg). However there are a large number of workers who weights more than 310 lbs.(140 kg). To solve this, Tractel has developed the LeGrand harness which incorporates the new E6 shock-absorbing lanyard to the harness.This shock-absorbing lanyard is available on its own so that it can be used with different harnesses. The shock absorber is constructed ofpre-oriented yarn (POY) and a sheath.
A = Anchorage connectorA component or subsystem that functions as an interface between the anchorage and a fall protection, work positioning, rope access, or rescue system for the purpose of coupling the system to the anchorage
B = Body support (Full body harness)A body support designed to contain the torso and distribute the fall arrest force over at the upper thighs, pelvis, chest and shoulders.
C = Connecting subsystemAn assembly, including the necessary connectors, comprised of all components, subsystems, or both, between the anchorage or anchorageconnector and the harness attachment point.
D = Deceleration distanceThe distance fallen during the period of engagement of a fall arrest system to the moment the fall arrest attachment comes to a complete stop.
CSA STANDARDSCSA STANDARDS
TRACTEL OFFERS FALL PROTECTION FOR HEAVY WORKERSTRACTEL OFFERS FALL PROTECTION FOR HEAVY WORKERS
T R A C T E L W O R L D W I D E ā¦
In the United States
110 Shamut Rd.Canton, MA 02021
315 Cloverleaf Dr., Build. EBaldwin Park, CA 91706
1 800 561-3229Local: (514) 493-3332 ā¢ Fax: (514) 493-3342 ā¢ [email protected] ā¢ www.tractel.com
In Canada
11020 Mirabeau St.Montreal, Quebec H1J 2S3
1615 Warden Ave.Scarborough, Ontario M1R 2T3
P4525C-4000-02/08 ā Ā©2008 Tractel. All rights reserved. Fallstop is a registered trademark of Tractel. Printed in Canada. CANADA
Tractel is a proud member of these associations: