www.hydroblast.co.uk

Falch R10 high pressure water jetter

1000 bar , 14 litre/ minute

g357

Pressure Range 50 - 1000 bar

Water Usage 7- 13 l/min

Electric motor 37 kW / 30 kW 1900 u/min

Electric Information 400 V / 50 Hz / 63 A

Power/Speed Pumps 28 kW 1057 u/min

Standard nozzle 019 US gal/min / 0.95mm

Water Cut Off

Duty Cycle (Hours /day ) 24

Guarantee 24 months *Back to base, servicing UK clients only

Water tank volume 250 litre

Weight 635kg

Dimensions 1450x 1270 x 1420 mm

Noise level 75 dB (A) 1 m / LWA

Article Number g357

maximum pressure water jet unit 1000 bars, 840l/h stationary unit for utilisation indoor. fork-lift mounted for easy transport. plastic hood made of impact resistant and special heat resistant hand laminate. protects the engine and pump from dirt and keeps noise levels to a minimum. water filter for consistently clean water quality. water tank made of plastic, cast en bloc, weldless, integrated into the unit. shock-resistant for safety and rust proof. compensates for pressure variations in the supply and increases the service life of the high pressure pump with bubble-free water. water primary pressure pump for optimal water supply of the high pressure pump. falch crankshaft pump, slow-running for maximum load capacity and durability. service and maintenance costs were reduced by using high quality materials and components. the simple yet sturdy pump design guarantees a quick and cost effective replacement of worn parts even after several years. the valves and the pump head are completely made of stainless steel, low wear stainless steel pistons. light aluminium housing. excellent heat dissipation. cast steel guides cast in aluminium. water-cooled oil heat exchanger. high pressure seals with packings - long service life, easy to exchange, reasonably priced. heavy- duty drive designed for 10,000 hrs. no water in oil possible as assemblies are separate. the operating pressure is adjustable. electric motor with power reserve for 100% continual use as well as start-up current optimisation to prevent fuses being blown. safety/control: for the safety of the complete system some components are installed over and above the statutory requirements. the control purposefully operates without any electronic components in order to prevent downtimes caused by vibration humidity and cold. service hour meter for easy monitoring of blasting work times and service intervals. holder for accessories case. holder for water inlet hose reel, 25m 3/4" water hose. high pressure hose falch nonstop 12, 20m 1200bar 70°C, thanks to its 10mm internal diameter has just approx. 1/3 of the pressure loss of an 8mm hose. the 4 inserts provide for extra durability without any repair costs. hose reel for hp-hose. high pressure dump gun, falch dump gun 25, guarantees long-term blasting operation with minimum strain on the operator. lance 800mm with nozzle support and flat jet nozzle for safe working. service: we offer service to units based in the UK only.accessories by falch provide further options and save time during blasting. optimal protective clothing and special seminars mean operators can achieve better and faster results. guarantee: falch offers a 12 month guarantee with unlimited operating hours for the whole equipment. we refer to our guarantee terms. Guarantee on units sold outside the UK are strictly back to base. Telephone assistance is always available