Fair Items

7/27/2019 Fair Items

http://slidepdf.com/reader/full/fair-items 1/18

SCHEDULE ̀ B'

PROPOSED CONSTRUCTION OF AUDITORIUM & AMPHITHETRE

AT AKURDI, FOR PCMC.

SECTION A :- R.C.C. ITEMS

1 Providing and casting in situ cement concrete in M-25of trap / granite /

quartzite / gneiss metal of R.C.C. pardi 230mm thick including centering,

formwork, compacting and roughening them if special finish is to provided

and curing etc. complete.as per details & directed by Engineer -incharge.

(Excluding reinforcement) (Rate Inclusive with R.M.C. Mix)

i 105.88 Cum UP TO GROUND FLOOR SLAB

ii 68.26 Cum 1ST FLOOR SLAB

iii 68.26 Cum 2ND FLOOR SLAB

2 Providing and casting in situ cement concrete in M-25of trap / granite /

quartzite / gneiss metal of R.C.C. pardi 350mm thick including centering,

formwork, compacting and roughening them if special finish is to provided

and curing etc. complete.as per details & directed by Engineer -incharge.

(Excluding reinforcement) (Rate Inclusive with R.M.C. Mix)

i 502.74 Cum UP TO GROUND FLOOR SLAB

SECTION B :- GENERAL ITEMS

3 31.00 Sqm Providing & fixing of Rubber Matting 8 mm thick of chequered or approved

design fixing with adhesive solution including, unloading transporting , all

necessary arrangement, all taxes, Octroi, tools,plants, Machinery ,other

fixtures & fasteners etc. complete.as per details & directed by Engineer -in-

charge.

4 10.00 Sqm Providing and preparing Kitchen Platform made up from 30 mm thick and

75 cm. wide one side polished Granite top 75cm high vertical support for

kadappa at 1 m. c/c of 25mm thick both side polished kadappa middle

shelf and bottom of 20 mm thick one side polished kadappa with facia patti

of 20 x 50mm kadappa including all material labour cutting fixing with

cement mortar and araldite curing polished and cleaning etc. complete.

DESCRIPTIONI. No TOTAL

QAUNTITY

UNIT



5 Providing and fixing sills for window of polished machine cut super

White marble stone 20 mm to 25 mm thk. on a bed with nosing inside

moulded as per drawing or as per directed, on a bed of 1:4 cement mortar

including filling joints with colour pigment , curing, polishing, unloading,

transporting, all necessary arrangement, all taxes, Octroi, tools, plants,

Machinery ,other fixtures & fasteners etc. complete.as per details &

directed by Engineer -incharge. (Width of window sill 100 to 300 mm &Thk. of White Marble 20 to 25 mm)

i 80.00 Sqm a)For Ground & First Floor -

ii 10.00 Sqm b)For Second Floor

iii 10.00 Sqm c)For Third Floor

6 10,000.00 Sqm Providing and fixing BASALT STONE for Floor on a bed of 1:4 cement

mortar including filling joints with colour pigment to match the color of red

granite including, unloading, transporting , all necessary arrangement, all

taxes, Octroi, tools & plants, Machinery,other fixtures & fasteners etc.

complete.as per details & directed by Engineer -incharge.

7 3,000.00 Sqm Providing and laying polished machine cut Basalt STONE slabs 30 to 40

mm. thick for treads and risers of steps and staircases, with rounded

nosing for the treads on a bed of 1:4 cement mortar including cement float,

filling joints with neat cement slurry, curing, polishing and cleaning etc.

complete.as per details & directed by Engineer -incharge. Spec. No. Bd.

M. 22,Page No. 390

8 600.00 Sqm Providing and fixing Jaiselmer Granite for treads and risers of steps and

staircases, with nosing for the treads molded as per drawing or as directed

on a bed of 1:4 cement mortar including filling joints with colour pigment tomatch the color of red granite including, unloading, transporting , all

necessary arrangement, all taxes, Octroi, tools & plants, Machinery,other

fixtures & fasteners etc. complete.as per details & directed by Engineer -in-

charge.

9 930.00 Sqm Providing & Fixing heavy duty VYARA interlocking concrete rubber

mould glossy paver blocks of 80 mm thk. of having strength of 400

kg/sq.cm of approved and shape on a bed crushed sand 20 to 30 mm thk.

including skirting joints and cleaning etc. complete.as per details &

directed by Engineer -incharge.

10 505.00 Sqm Supply, Fabrication and Erection of Aluminium Louvered pergola at the

terrace level fixed to RCC beams, with aluminium sub structure & extruded

louvres with all necessary hardware complete as per drawings and details



10 - Sqm Supply, Fabrication and Erection of Wooden/ Timber Louvered pergola at

the terrace level fixed to RCC beams, with aluminium sub structure &

extruded louvres with all necessary hardware complete as per drawings

and details

11a 15.00 Sqm Providing & fixing Yellow Jaiselmer stone for cladding 20 mm thick in

required position on plaster of 1:4 cement mortar including scaffolding,

filling joints with neat cement slurry , curing rubbing & polishing complete.including necessary scaffolding , all necessary arrangement, all taxes,

Octroi, tools, plants, transport, Machinery ,other fixtures & fasteners etc.

complete.as per details & directed by Engineer -incharge.

11b 15.00 Sqm Providing & fixing Yellow Jaiselmer stone DRY cladding 20 mm thick in

required position including GI Frame , Pins, necessary Hardwarre,

scaffolding, rubbing & polishing complete. iall necessary arrangement, all

taxes, Octroi, tools, plants, transport, Machinery ,other fixtures & fasteners

etc. complete.as per details & directed by Engineer -incharge.

12a 285.44 Sqm Providing and fixing polished Raw Silk Granite stone cladding 20 mm

thick in required position on plaster of 1:4 cement mortar including

scaffolding, filling joints with neat cement slurry , curing polishing &

cleaning etc. complete.as per details & directed by Engineer -incharge.

12b 15.00 Sqm Providing & fixing Raw Silk Granite stone DRY cladding 20 mm thick in

required position including GI Frame , Pins, necessary Hardwarre,

scaffolding, rubbing & polishing complete. iall necessary arrangement, all



13 15.00 Sqm Providing and fixing Italia Glass Mosaic tiles equipments of quantity and

size (20 mmx20mmx 4mm thick) of tiles on vertical faces of RCC wall in

with ready made polymer modified adhesive of approved quality including

scaffolding ,cleaning etc. complete including necessary scaffolding

required for applying of paint including all necessary arrangement, all


etc. complete.as per details & directed by Engineer -incharge. giving 10

years grantee on stam paper .

14 12,370.00 Sq Inch Providing and fixing letter internal signages in stainless steel sheet of 21

swg thk stainless steel background and ingroving black letters of required

sizes of approved shade, colour, font fixing with good quality stainless

steel screws as shown in the drawing as directed by engineer in charge

including all type of taxes, Octroi, transportation and necessary scaffolding




15 21.60 Sqm Providing & fixing 12 mm thick tough glass partition in combination of

fixed/openable glass of ht 2700 mm up to false ceiling & fixed to floor by

glass downwards into tile floor. Openable glass to be supported on special

patch fittings at directed locations with openable door operated on Patch

fittings having upper/lower/side patch with EPC lock, 300 mm handle &

strike plate of make DORMA i.e. SM 1010, 1020, Lock with cylinder, Pivot,

Floor Spring BTS 75V. (Including Floorspring etc, complete.

Supplying & fixing in position Toilet Cubicle ( of following standard

dimension which includes 600mm door size width) made of heat, bacteria,

water, chemical, scratch and impact resistant 12mm thick solid compact

laminate panels including doors, pilasters & intermediate panels finished

with approved texture/shade as per the detail drawings & as per IS 2046

(Indian Standard) and as per fire retardant BS-476/97 standard. The

product should have Green Guard Certificate .

This also includes providing and fixing in position necessary hardware

made out of Stainless steel (Grade 304) as per manufacturer’s

specifications & Architects instructions like (1) Door Knob, (2) Gravity

Hinges, (3) Thumb turn lockset with Occupancy indicators, (4) Coat hooks

with Door stopper (5) U- Channels, (6) Adjustable foot/pedestal, (7) Top rail

with Corner contactor

(8) Rubber noise deafening tape, (9) Screws & wall Plugs. The top fitting

should consist of SS round top rail which will get fixed with pilasters, with

SS panel tube holder, SS corner bend (connected with top rail) will be used

on the corner of cubicle in absence of brick wall, SS wall fixing is used only

on the wall which will hold the ss top rail. All screws will of 304 Grade in

stainless steel with satin finish. All pilasters are supported by stainless

steel Bottom Cladding. The base of the stainless steel bottom cladding will

be anchored to the floor with a clearance height up to 150 mm.

(a) 63.00 Nos. Toilet Cubicle with standard dimension of 2025mm Height x 1000mm

Width x 1550mm Depth, which includes 600mm door size width including

all necessary arrangement, all taxes, Octroi, tools, plants, transport,

Machinery, other fixtures & fasteners etc.complete. as per details &

directed by Engineer -incharge.

(b) 63.00 Nos. Toilet Cubicle I-Shape (Front Partition) with standard dimension of

2025mm Height x 1000mm Width which includes 600mm door size width

including all necessary arrangement, all taxes, Octroi, tools, plants,

transport, Machinery,other fixtures & fasteners etc. complete.as per details

& directed by Engineer -incharge.

Note: All aspects specified by the manufactures, Greenlam Sturdo

Classique Evergreen series or equivalent. Specs.:- Special

Specification No. Vol.-II, 9) Furniture Work, Page no.152.

GLASS CLADDING WORK

16



17 368.97 Sqm Providing fabricating, supplying and fixing in position Structural glazing to

external faces of the building straight in plan consisting of main panel

work of verticals and horizontals made out of specially designed extruded

38mm x 63mm anodized aluminium sections, anchored to RCC elements

through adequately designed Galvenised MS clamps, brackets using 5mm

thick one way reflective glass using structural and weather silicon sealant

of approved grade specification including all necessary arrangement, alltaxes, Octroi, tools, plants, transport, Machinery, other fixtures & fasteners

etc. including all leads lifts and scaffolding etc. complete. as per details &

directed by Engineer -incharge. Specs.:- Special Specification No. Vol.-

II, 8) ACP &Glazing, Page no.147.

18 25.00 Nos. P/F S.S. Bollards in 150 mm dia. S.S. pipes (approx 1.00 M height each)

bolted to the ground with MS base plate 6 mm thk., foundation bolts, nuts,

etc., all unexposed steel work to be treated with 2 coats of red oxide

primer, completeTOTAL OF SEC. `B'---------------------

SEC C- FURNITURE WORK

1 13.00 No Providing & fixing storage cabinet of size 1.80 (L) x 2.10 (H) x 0.60 m. (D)

made out of 19mm commercial plywood for sides and shelves excluding

back side, 6mm commercial plywood for back side, shutters made out of

12mm commercial plywood frame and 6mm commercial plywood on both

sides including B.T.W lipping of 1" X 1/4" and 1 1/2" x 1/4" for fixing of

hinges for the shutter as shown in drawing, 1.5mm laminate of royal touch

or equivalent make and of approved shade French polish for all exposedplywood surfaces as per drawing including 3" x 1/2" x 1/4" S S pin brass

hinges, brass oxidized handles & tower bolt, locks, nails, screws, fevicol

and necessary labour etc. complete including all necessary arrangement,

all taxes, Octroi, tools, plants, transport, Machinery, other fixtures &

fasteners etc. complete as per details & directed by Engineer- In-Charge.



2 9.00 No Providing & fixing storage cabinet of size 3.5 (l) x 1.67 (H) x 0..6m (D)

made out of 19mm commercial plywood for sides and shelves excluding

back side, 12mm commercial plywood for back side, shutters made out of

12mm commercial plywood frame and 6mm commercial plywood on both

sides including B.T.W lipping of 1" X 1/4" and 1 1/2" x 1/4" for fixing of

hinges for the shutter as shown in drawing, 1.5mm laminate of royal touch

or equivalent make and of approved shade French polish for all exposedplywood surfaces as per drawing including 3" x 1/2" x 1/4" S S pin brass

hinges, brass oxidized handles & tower bolt, locks, nails, screws, fevicol

and necessary labour etc. complete including all necessary arrangement,

all taxes, Octroi, tools, plants, transport, Machinery, other fixtures &

fasteners etc. complete as per details & directed by Engineer- In-Charge.

3 4.00 No Providing & supplying Readymade Dressing Table [ ______ make

(Model ______)] size- W- 0.441x D-0.468x Ht.-1.71M. made out of 19

mm waterproof ply and veneer finish with melamine polish. Brass fittingswith proper storage arrangement by providing drawers etc. complete.

including all necessary arrangement, all taxes, Octroi, tools, plants,

transport, Machinery ,other fixtures & fasteners etc. complete. as per

details & directed by Engineer- In-Charge Specs.:- Special

Specification.

4 34.00 No Providing & supplying Readymade Corner Table [_____ or similar make)

size- w-0.440xd-0.450xht.-0.51m. made out of 19mm waterproof ply and

veneer finish with melamine polish. Brass fittings with 12 mm Glass top etc.

complete. including all necessary arrangement, all taxes, Octroi, tools,

plants, transport, Machinery, other fixtures & fasteners etc. complete. asper details & directed by Engineer- In-Charge. Specs.:- Special

Specification.

5 4.00 No Providing & supplying Readymade Center Table [_____ or similar make)

size- w-0.850xd-0.850xht.-0.51m. made out of 19mm waterproof ply and

veneer finish with melamine polish. Brass fittings with 12 mm Glass top etc.

complete. including all necessary arrangement, all taxes, Octroi, tools,

plants, transport, Machinery, other fixtures & fasteners etc. complete. as

per details & directed by Engineer- In-Charge. Specs.:- Special

Specification.



6 1.00 Sqm Providing & fixing for Conference Table 26 x 1.00m. x 0.76m made in

19mm thick waterproof ISI Creative / Century make or equivalent make ply

for with 12mm thick waterproof ISI Creative / Century make or equivalent

make ply for front with keyboard drawer fixed with 12" drawer channel s

and 1 1/2" x 1/4" lipping finished in 1mm thick laminate _________ make

and_____ finish or Equivalent. Top of table covered with 6mm thick plane

glass (made- modiguard.) Edges covered in teakwood lipping of requiredsize (1" x 1/4"). All necessary nails, screw and other all taxes, transport,

fastening & fixture used as per design approved and requirement.

Polishing for moulding and lipping done 2 coats of Malamine polish etc.

complete. as per approved and as per details & directed by the engineer in

charge.

7 6.00 Sqm providing & fixing counter for Security & Reception of Size 13'x2'6" with 8

drawers 3 keybord trays & 2 shutters with sheves and drawer teas 12mm

glass of bevil edge on counters top supported by 3" long SS studes of 2"

dia drawers side back bottom and total back of counter is manufacturedwith 12mm thick waterproof ISI creative / century make ply fixed with 20"

telescopic drawers channels with including edges covered in teakwood

lipping of 1" x1/4" finished in 1mm thick laminate of _________ make

and______finish skirting made up of teakwood of section size 3"x2" the

drawer shutters are fitted with maganetic ball catch of s.s 4" ss handles

and 4"x1/2"x3/4| ss hings with necessary nails screw , fevicol required

labour etc. and other S.S fastening fixtures as per requirement white zink

polishing for teak wood lipping ,malamine polish for all exposed surfaces of

plywood and teakwood etc. complete as per drawing and design approved

as per details & directed by the enginners incharge.



8 9.60 Sqm providing & fixing counter for Cafeteria & Services with 8 drawers 3

keybord trays & 2 shutters with sheves and drawer teas 12mm glass of

bevil edge on counters top supported by 3" long SS studes of 2" dia

drawers side back bottom and total back of counter is manufactured with

12mm thick waterproof ISI creative / century make ply fixed with 20"

telescopic drawers channels with including edges covered in teakwood

lipping of 1" x1/4" finished in 1mm thick laminate of _________ makeand______finish skirting made up of teakwood of section size 3"x2" the

drawer shutters are fitted with maganetic ball catch of s.s 4" ss handles

and 4"x1/2"x3/4| ss hings with necessary nails screw , fevicol required

labour etc. and other S.S fastening fixtures as per requirement white zink

polishing for teak wood lipping ,malamine polish for all exposed surfaces of

plywood and teakwood etc. complete as per drawing and design approved

as per details & directed by the enginners incharge.

9 19.00 No Providing & fixing Table Of Size 1' x 3'-3" Top is made in 19 mm thkcentury /creative ply with cross leg support of 19 mm ply of century

/creative ply finished in 1mm thick laminate of _______make and

______finish teak wood skirting is to be made in section size 5"x2" for

counter (both main and small table ) All necessary nails ,screw, fevicol

araldite abro tape, Octroi, other taxes, transport, necessary labour and

other fastening fixtures in S.S to be used as per requirement. with

providing white zink polishing for teak wood lipping etc. complete. as per

drawing and design approved (Mode of measurement as per elevational

plan) as per details & directed by engineer in charge.

10 18.00 Sqm Providing & fixing 6mm thick mirror of Required size fixed in frame

made in 19 mm thick water proof ISI creative / century ply for all and

shelves excluding backside 12 mm thick water proof ISI creative / century

ply for backside as per drawing , 1 mm laminates of sudue finish and

_____make and of approved shade fixed on top side of mirror fixed with

1/2"x1/2" L teakwood moulding French polish for all exposed surface of

plywood polishing for lipping done in two coats of melamine polish and

moulding as per drawing including nails, screws, fevicol and necessary

labour etc.complete including all necessary arrangement, all taxes, Octroi,

tools, plants, transport, Machinery, other fixtures & fasteners etc. complete.as per details & directed by Engineer -incharge.



11 15.00 No Providing & supplying Centre/ coffee Table [ ___make ___ model (size

600mm dia with additional 12mm thk glass top.) ]in made out of 19mm

waterproof ply and veneer finish with melamine polish. Brass fittings with

12 mm thk. Glass top etc. complete. including all necessary arrangement,

all taxes, Octroi, tools, plants, transport, Machinery ,other fixtures &

fasteners etc.complete.as per details & directed by Engineer -incharge.

TOTAL OF SECTION `C'



RATE

In figure

-

-

-

-

-

-

AMOUNT IN RS.



-

-

-

-

-

-



-

-

-

-

-

-

-



-

-

-

-



-

-

-

0.00



0.00

0.00

0.00

0.00



0.00

0.00



0.00

0.00

0.00



0.00

-

Fair Items

Documents

Transcript of Fair Items