FACP - uma.edu
12
UP UP UP UP DN UP UP CG CG FACP F 830 SF FUNCTION B OCC:55 205 SF UTILITY 177 SF MEETING OCC:12 205 SF OFFICE 144 SF E.I.S. OFFICE 356 SF E.I.S. 1437 SF HUB 141 SF VEST 147 SF VEST 160 SF DIRECTOR 817 SF ADVISING 189 SF ASST. DIRECTOR 189 SF OFFICE 106 SF ADVISOR 148 SF TESTING 153 SF HOTEL OFFICE 137 SF JMG OFFICE 127 SF EARLY COLLEGE OFFICE 116 SF VEST 231 SF DATA MANAGEMENT OFFICE 963 SF FINANCIAL AID OPEN WORK AREA 154 SF DIRECTOR 107 SF PROGRAMMER 82 SF FILE STORAGE 180 SF IT SERVER 76 SF STORAGE 243 SF REGISTRAR 813 SF MAC LAB OCC:17 114 SF ASST. DIRECTOR 389 SF REGISTRAR OPEN WORK AREA 177 SF MEN 177 SF WOMEN 67 SF ELEC 67 SF CUST 1224 SF LOBBY 63 SF ELEV 161 SF VEST 73 SF FREEZER 67 SF COOLER 197 SF MEN 212 SF WOMEN 71 SF TOILET 232 SF SHIPPING/ RECEIVING 2021 SF CAFE-DINING OCC:145 665 SF KITCHEN OCC:3 105 SF DRY STOR 74 SF COPY 60 SF VEST 93 SF OFFICE 98 SF VESTIBULE 79 SF CUSTODIAN 2092 SF UNIVERSITY STORE OCC:35 567 SF GENERAL RECEIVING 359 SF IT STORAGE 302 SF IT WORK AREA & HELP DESK 774 SF IT 145 SF IT ASST DIR 162 SF IT DIRECTOR 83 SF DISPLAY 20 SF STOR 181 SF STAIR NW 185 SF STAIR NE 252 SF STAIR S 63 SF VEST EXIT CAPACITY = 165 EXIT CAPACITY = 165 EXIT CAPACITY = 340 EXIT CAPACITY = 340 EXIT CAPACITY = 165 EXIT CAPACITY = 165 EXIT CAPACITY = 225 EXIT CAPACITY = 340 EXIT CAPACITY = 340 TOTAL EXIT CAPACITY = 680 EXIT CAPACITY = 165 55 68 68 44 4 1 12 10 10 2 45 133 14 1 1 2 2 9 3 1 2 2 2 1 31 1 3 13 17 64 35 1 2 147 3 75 75 1 2 9 3 1 2 23 133 EXIT CAPACITY = 165 133 14 175 155 288 2041 SF FUNCTION A OCC:136 295 SF EARLY COLLEGE 636 SF FLIGHT SIMULATOR OCC:13 OFFICE 143C 1 215 SF OFFICE 195 SF OFFICE 2 2 1341 SF ADMISSIONS OPEN WORK AREA 374 SF STORAGE 495 SF WAITING 109 SF ADVISOR 155 SF STAIR W 1 12 5 28 F F F FACP F F S S S S S S S S S S S S S S S S S S S S S S S S S H H S F F F F S F 61' CPT 52' CPT 72' CPT 52' CPT 43' CPT 64' CPT LIFE SAFETY PLAN LEGEND FEC EXISTING / NEW FIRE EXTINGUISHER PATH OF EGRESS TRAVEL FIRE ALARM CONTROL PANEL FIRE ALARM MANUAL PULL STATION FIRE ALARM HORN/STROBE FIRE ALARM STROBE FIRE ALARM SMOKE DETECTOR CEILING MOUNTED EMERGENCY LIGHTING BATTERY UNIT WALL MOUNTED EMERGENCY LIGHTING BATTERY UNIT ILLUMINATED EXIT SIGN MAGNETIC DOOR HOLDER FIRE ALARM SMOKE/HEAT DETECTOR # ADA PUSH BUTTON DH ADA H S ACTUAL EGRESS OCCUPANCY DENOTES SMOKE PARTITION ASSEMBLY DENOTES 1 HOUR RATED FIRE BARRIER ASSEMBLY SEPARATION REQUIRMENTS DENOTES 2 HOUR RATED FIRE BARRIER ASSEMBLY NOTE: CONTRACTOR TO SEAL ANY NEW OR EXISTING PENETRATIONS THROUGH THE REFERENCED WALL TYPES LABELED ON THESE PLANS. REFER TO A40 SERIES DRAWINGS FOR DETAILS. 2 HR DENOTES 2 HOUR RATED FIRE WALL ASSEMBLY CODE COMPLIANCE BUILDING DESIGN CODES: AMERICANS WITH DISABILITIES ACT (ADA) NFPA 1 NFPA 101 LIFE SAFETY CODE / 2015 INTERNATIONAL BUILDING CODE / 2015 INTERNATIONAL EXISTING BUILDING CODE / 2015 MAINE UNIFORM BUILDING and ENERGY CODE / 2015 UNIFORM PLUMBING CODE / 2015 NFPA 13 STANDARD FOR THE INSTALLATION OF SPRINKLER SYSTEMS INTERNATIONAL ENERGY CONSERVATION CODE / 2009 INTERNATIONAL MECHANICAL CODE / 2015 ASHRAE / IES STANDARD 90.1 - 2013 NFPA 70 NATIONAL ELECTRIC CODE / 2017 CONSTRUCTION TYPE : NFPA: TYPE II (000) IBC: TYPE IIB BUILDING AREA: EXISTING TO REMAIN 41,713 NET SF NEW FLOOR AREA 8,303 NET SF TOTAL 50,016 NET SF ALLOWABLE (IBC) BUSINESS OCCUPANCY W/ SPRINKLER BASE (TYPE IIB) SINGLE STORY: 69,000 SF MAX OCCUPANCY CLASSIFICATION: NFPA: NEW ASSEMBLY (CHAPTER 12) NEW EDUCATION (CHAPTER14) EXISTING EDUCATION (CHAPTER15) MULTIPLE OCCUPANCIES TABLE 6.1.14.1.3 IBC: BUSINESS GROUP B (SECTION 303.1.3 WITH ASSOCIATED ASSEMBLY) OCCUPANCY LOADS: (PER PERSON) OFFICE (BUSINESS) 100 SF GROSS CLASSROOM: 20 SF NET CAFETERIA: 15 SF NET KITCHEN: 200 SF GROSS (IBC) 100 SF GROSS (NFPA) STORAGE: 300 SF GROSS MECHANICAL: 300 SF GROSS NUMBER OF STORIES: ACTUAL: 2 ALLOWABLE: 3 BUILDING HEIGHT: ACTUAL: EXISTING 38' - 0" NEW 26' - 6" ALLOWABLE: 75' - 0" FIRE SUPPRESSION: FULLY SUPERVISED SPRINKLER SYSTEM FIRE ALARM: MONITORED FIRE ALARM SYSTEM FIRE SEPARATION NONE REQUIRED/ MIXED OCCUPANCY ALLOWED PER NFPA 6.1.14.1.3 MEANS OF EGRESS (WITH SPRINKLER SYSTEM) EXIT ACCESS TRAVEL: IBC: 250' NFPA: 200' CORRIDOR FIRE - RESISTIVE RATING: IBC: NO REQUIREMENT NFPA: NO REQUIRMENT COMMON PATH OF TRAVEL (CPT): IBC: 100' NFPA: 100' DEAD END CORRIDOR: IBC: 50' NFPA: 50' AUBURN PORTLAND PORTSMOUTH BOSTON Harriman Project No. PA / PE: Drawn By: Harriman Associates c Proj North Revision Description Rev Date MARCH 11, 2020 AUGUSTA, MAINE 19331 A01-1 MDL WHG CODE REVIEW 2020 UNIVERSITY OF MAINE AT AUGUSTA CAMPUS WELCOME CENTER CONSTRUCTION DOCUMENTS SCALE: 3/32" = 1'-0" 1 FIRST FLOOR CODE PLAN 03-26-2020 ADDENDUM #4
Transcript of FACP - uma.edu
EXIT CAPACITY = 225
EXIT CAPACITY = 340
EXIT CAPACITY = 340
PATH OF EGRESS TRAVEL
FIRE ALARM CONTROL PANEL
FIRE ALARM HORN/STROBE
FIRE ALARM STROBE
ILLUMINATED EXIT SIGN
MAGNETIC DOOR HOLDER
SEPARATION REQUIRMENTS
DENOTES 2 HOUR RATED FIRE BARRIER ASSEMBLY
NOTE: CONTRACTOR TO SEAL ANY NEW OR EXISTING PENETRATIONS THROUGH THE REFERENCED WALL TYPES LABELED ON THESE PLANS. REFER TO A40 SERIES DRAWINGS FOR DETAILS.
2 HR DENOTES 2 HOUR RATED FIRE WALL ASSEMBLY
CODE COMPLIANCE
BUILDING DESIGN CODES:
AMERICANS WITH DISABILITIES ACT (ADA) NFPA 1 NFPA 101 LIFE SAFETY CODE / 2015
INTERNATIONAL BUILDING CODE / 2015 INTERNATIONAL EXISTING BUILDING CODE / 2015 MAINE UNIFORM BUILDING and ENERGY CODE / 2015 UNIFORM PLUMBING CODE / 2015 NFPA 13 STANDARD FOR THE INSTALLATION OF SPRINKLER SYSTEMS INTERNATIONAL ENERGY CONSERVATION CODE / 2009 INTERNATIONAL MECHANICAL CODE / 2015 ASHRAE / IES STANDARD 90.1 - 2013 NFPA 70 NATIONAL ELECTRIC CODE / 2017
CONSTRUCTION TYPE:
BUILDING AREA:
EXISTING TO REMAIN 41,713 NET SF NEW FLOOR AREA 8,303 NET SF TOTAL 50,016 NET SF
ALLOWABLE (IBC) BUSINESS OCCUPANCY W/ SPRINKLER BASE (TYPE IIB) SINGLE STORY: 69,000 SF MAX
OCCUPANCY CLASSIFICATION:
NFPA: NEW ASSEMBLY (CHAPTER 12) NEW EDUCATION (CHAPTER14) EXISTING EDUCATION (CHAPTER15) MULTIPLE OCCUPANCIES TABLE 6.1.14.1.3
IBC: BUSINESS GROUP B (SECTION 303.1.3 WITH
ASSOCIATED ASSEMBLY)
OCCUPANCY LOADS: (PER PERSON)
OFFICE (BUSINESS) 100 SF GROSS CLASSROOM: 20 SF NET CAFETERIA: 15 SF NET KITCHEN: 200 SF GROSS (IBC)
100 SF GROSS (NFPA) STORAGE: 300 SF GROSS MECHANICAL: 300 SF GROSS
NUMBER OF STORIES:
ALLOWABLE: 75'-0"
FIRE SUPPRESSION:
MEANS OF EGRESS (WITH SPRINKLER SYSTEM)
EXIT ACCESS TRAVEL: IBC: 250' NFPA: 200'
CORRIDOR FIRE-RESISTIVE RATING: IBC: NO REQUIREMENT NFPA: NO REQUIRMENT
COMMON PATH OF TRAVEL (CPT): IBC: 100' NFPA: 100'
DEAD END CORRIDOR: IBC: 50' NFPA: 50'
Graphic Sc ale
AUBURN PORTLAND PORTSMOUTHBOSTON
Graphic Sc ale
Harriman Project No.
CAMPUS WELCOME CENTER
OFFICE
OCC:5
171 SF OFFICE
163 SF OFFICE
675 SF CONFERENCE
OCC:45159 SF OFFICE
75 SF D.O.S. STOR
193 SF STAIR NE
1 6
1 6
MAXIMUM EXIT TRAVEL DISTANCE TO FIRST FLOOR SAFE HAVEN: 191'
839 SF MECHANICAL
548 SF STORAGE
1019 SF STORAGE
63 SF ELEVATOR
68 SF E.M.R.
124 SF IT-TEL
135 SF ELECTRICAL
397 SF CORRIDOR
Graphic Sc ale
AUBURN PORTLAND PORTSMOUTHBOSTON
Graphic Sc ale
Harriman Project No.
CAMPUS WELCOME CENTER
CAMPUS WELCOME CENTER
FLANGE SIZE (IN)
RPM SPEED HORSEPOWER Phase VOLTS NOTES
CP-1 TACO 1915 CIRCULATOR 25.0 32 5.75 1 1/2" 1760 1/4 1 120 V POWERED FROM BOILER B-1
CP-2 TACO 1915 CIRCULATOR 25.0 32 5.75 1 1/2" 1760 1/4 1 120 V POWERED FROM BOILER B-2
P-1 TACO KV 2009D VERTICAL INLINE
50.0 65 7.5" 2" 1760 2 3 460 V
P-2 TACO KV 2009D VERTICAL INLINE
50.0 65 7.5" 2" 1760 2 3 460 V
BOILER SCHEDULE
OUTPUT (MBH) GPM VOLTS CURRENT
B-2 Viessmann Vitodens 200 B2HA-80-100 NG 71-352 67-333 25 120 12A
B-1 Viessmann Vitodens 200 B2HA-80-100 NG 71-352 67-333 25 120 12A
AIR SEPARATOR SCHEDULE
DIAMETER (IN)
AS-1 TACO 49025ADR-125 HOT WATER 2 1/2" 75 10 20
FINTUBE RADIATION SCHEDULE
(IN.) CAPACITY
ENCLOSURE DIMENSIONS
W x H (IN.) NOTES A STERLING VERSALINE SS STYLE C3/4-435 3/4" 700 3-1/4" SQ. 50 2 5 5/16x29 1/2
B STERLING DURAVANE JDVPB2 C45 1" 780 3-1/4" SQ. 50 2 10 7/8x11
EXPANSION TANK SCHEDULE
(GAL.)
MIN TEMP. (DEG. F)
MAX TEMP (DEG .F)
WEIGHT (LBS) NOTES
ET-1 TACO CA90-125 HOT WATER 23.0 150.0 90 140 20 30 200
REGISTERS, GRILLES & DIFFUSERS SCHEDULE
TAG MANUFACTURER MODEL TYPE NECK
SIZE (IN) DIRECTION OF BLOW MAX NC MAX SP DAMPER FINISH BORDER NOTES
R1 PRICE INDUSTRIES 80 SERIES GRID CORE 18 x 18 N/A 20 0.09 in-wg NONE BAKED ENAMEL WHITE
LAY IN
R2 PRICE INDUSTRIES 80 SERIES GRID CORE 12 x 12 N/A 20 0.09 in-wg NONE BAKED ENAMEL WHITE
LAY IN
R4 PRICE INDUSTRIES 80 SERIES GRID CORE 22 x 22 N/A 20 0.09 in-wg NONE BAKED ENAMEL WHITE
LAY IN
R5 PRICE INDUSTRIES 80 SERIES GRID CORE 24 x 48 N/A 20 0.01 in-wg NONE BAKED ENAMEL WHITE
LAY IN
S1 PRICE INDUSTRIES 510 SERIES LOUVERED SUPPLY 12 x 12 N/A 20 0.09 in-wg NONE BAKED ENAMEL WHITE
LAY IN
S2 PRICE INDUSTRIES 510 SERIES LOUVERED SUPPLY 10 x 10 N/A 20 0.00 in-wg NONE BAKED ENAMEL WHITE
LAY IN
SURFACE MOUNT
SURFACE MOUNT
SURFACE MOUNT
T1 PRICE INDUSTRIES LBMH SERIES 24" LINEAR BAR GRILLE 24"x5" PLENUM
N/A 25 0.00 in-wg NONE BAKED ENAMEL WHITE
SURFACE MOUNT
WPD (IN. WG) NOTES
RHC-1 DAIKIN VEST 161 12" 12" 1 11.3 335 55 85 0.10 1.25 180 160 0.10
RHC-2 DAIKIN VEST 162 12" 12" 1 11.3 335 55 85 0.10 1.25 180 160 0.10
VAV SCHEDULE
TAG MANUFAC
TURER MODEL
DISCHAR GE NC NOTESROOM #
VAV-1 DAIKIN MQTHI5 137 6" 250 150 150 110.4 55 0.02 6.1 180 164 °F 0.8 GPM 0.01 1 12 1,2,3
VAV-2 DAIKIN MQTHI5 137 6" 250 150 150 110.4 55 0.02 6.1 180 164 °F 0.8 GPM 0.01 1 12 1,2,3
VAV-3 DAIKIN MQTHI5 137C 4" 100 50 50 106.3 55 0.02 4.1 180 159 °F 0.4 GPM 0.01 1 7 1,2,3
VAV-4 DAIKIN MQTHI5 137B 10" 400 150 150 105.7 55 0.01 8.2 180 159 °F 0.8 GPM 0.01 1 20 1,2,3
VAV-5 DAIKIN MQTHI5 137A 8" 500 250 250 90.8 55 0.08 9.7 180 158 °F 0.9 GPM 0.05 1 22 1,2,3
VAV-6 DAIKIN MQTHI5 143B 8" 230 160 160 100.4 55 0.04 7.8 180 162 °F 0.9 GPM 0.02 1 12 1,2,3
VAV-7 DAIKIN MQTHI5 143C 4" 150 100 100 105..5 55 0.04 5.4 180 167 °F 0.9 GPM 0.01 1 9 1,2,3
VAV-8 DAIKIN MQTHI5 143D 8" 250 150 150 100 55 0.04 7.3 180 159 °F 0.7 GPM 0.01 1 12 1,2,3
VAV-9 DAIKIN MQTHI5 143 8" 400 300 300 901 55 0.08 11.6 180 164 °F 1.5 GPM 0.04 1 11 1,2,3
VAV-10 DAIKIN MQTHI5 138B 6" 200 100 100 100.5 55 0.04 5.9 180 165 °F 0.8 GPM 0.01 1 12 1,2,3
NOTES: 1. SINGLE DUCT - STANDARD PROFILE. 2. DAIKIN CONTROLLER FACTORY MOUNTED & COMMISSIONED. 3. 120/24 VOLT SINGPE PHASE TRANSFORMER.
HOT WATER HEATING COIL SCHEDULE
TAG MANUFAC
WPD (IN. WG) NOTES
HWC-1 DAIKIN RTU-1 36" 30" 1 57.8 3300 65 81 0.13 5.50 130 109 0.60
HWC-2 DAIKIN RTU-2 30" 24" 1 28.7 1500 63 80 0.06 2.90 130 110 0.20
HWC-3 DAIKIN RTU-3 42" 24" 1 43.6 2600 65 80 0.09 4.30 130 110 0.60
HWC-4 DAIKIN RTU-4 24" 24" 1 52.2 1200 41 81 0.12 5.10 130 110 0.20
HWC-5 DAIKIN RTU-5 54" 33" 1 89.1 4200 61 81 0.08 8.70 130 110 1.50
PACKAGED ROOFTOP HVAC UNIT SCHEDULE
TAG MANUFACTURER MODEL SERVICE
WEIGHT (LBS) NOTES
SUPPLY AIR (CFM)
RTU-1 Daikin DCC150-H Admissions Area
3300 220 1.25 1165-1760 2.42 3 76/61 55/51.8 R410-A 146 97 2 1 2/.33 1075 95 480 29.8 40 1175.00
RTU-2 Daikin DSC048-V Central Offices
1500 120 1.25 1725 0.71 1 76.3/62.3 55/53.1 R410-A 47 35 1 1 1/.25 1050 95 480 11.9 15 570.00
RTU-3 Daikin DSC048-V Hub 160 2600 140 1.25 1760 1.05 1 76.5/61.5 55/52.3 R410-A 58 43 1 1 1/.25 1075 95 480 10 15 570.00
RTU-4 Daikin DSC048-V Function B 163
1200 440 1.25 1725 0.53 1 77.1/66.3 55/53.3 R410-A 47 35 1 1 1/.25 1050 95 480 11.9 15 570.00
RTU-5 Daikin DCC150-V Function A 164
4200 500 1.25 1165-1760 2.48 3 76/64.6 53.6/ R410-A 146 97 2 1 2/.33 1075 95 480 29.8 40 1175.00
NOTES: 1. DIFFUSERS SHALL BE MODEL SD100 WITH 1" SLOT WIDTH. 2. LINEAR BAR GRILLES SHALL BE CORE 16B, 5" WIDTH
2
1
1
1
CONDUCTORS & #12 GND. HOMERUNS FED FROM 20A, SINGLE
POLE CIRCUITS IN EXCESS OF 100 FEET SHALL BE #10 AWG
UNLESS INDICATED OTHERWISE. INSULATION TYPE SHALL BE
THHN/TWHN, 75 DEG. C, AND 600V CLASS UNLESS SPECIFIED
OTHERWISE.
FLEXIBLE LIQUID TIGHT CONDUIT.
2019). THE INTENT OF THE EXISTING CONDITIONS PLAN(S) IS TO
DOCUMENT EXISTING CONDITIONS. HOWEVER, ALL ELECTRICAL
DEVICES MAY NOT NECESSARILY BE INDICATED ON THE
DRAWINGS. FIELD VERIFY AND ADJUST WORK TO SUIT ALL FOUND.
2. REFER TO NON-DEMO PLANS TO DETERMINE EXTENT OF WORK
IN EACH AREA, INCLUDING WHETHER DEVICES ARE TO REMAIN,
BE REMOVED, REPLACED, ETC... EXCEPT AS NOTED, GENERALLY
THE INTENT IS THAT IF EXISTING DEVICES ARE SHOWN ON THE EXISTING
CONDITIONS PLANS AND NEW DEVICES ARE SHOWN ON THE NON-DEMO
PLANS THEN EXISTING DEVICES ARE TO BE REMOVED. IF EXISTING
DEVICES ARE SHOWN ON BOTH THEN DEVICES ARE TO REMAIN.
3. ALL EXISTING ITEMS INTENDED FOR REMOVAL SHALL BE REMOVED
WITH ALL ASSOCIATED HARDWARE INCLUDING, BUT NOT LIMITED TO:
CONDUIT, BOXES, WIRING, CABLES, HANGERS, ETC...
4. COORDINATE WITH MECHANICAL AND PLUMBING DRAWINGS FOR
MECHANICAL AND PLUMBING EQUIPMENT TO BE REMOVED. REMOVE
ALL ASSOCIATED CONDUIT, BOXES, WIRING, ETC...
5. CONDUIT IN GOOD CONDITION AND PROPERLY LOCATED MAY BE
REUSED WHERE APPLICABLE, UNLESS NOTED OTHERWISE.
ALL REUSED CONDUITS SHALL BE CLEARED WITH MANDREL AND
SWABBED CLEANED BEFORE INSTALLATION OF CONDUCTORS.
6. IN AREAS NOT RENOVATED BY THIS CONTRACT VERIFY THAT
ELECTRICAL POWER, LIGHTING AND SYSTEMS ARE NOT AFFECTED
BY THE ALTERATIONS. PROVIDE ALL WORK AS REQUIRED TO
MAINTAIN POWER AND PROPER OPERATION OF SYSTEMS.
7. PROVIDE WORK REQUIRED TO MAINTAIN EXISTING COMMUNICATIONS
CABLING SERVING PORTIONS OF THIS BUILDING AND CAMPUS THAT IS
NOT PART OF THIS RENOVATION OR PHASE OF WORK.
DEMOLITION NOTES:
FEEDER WIRING SHALL BE 600V, COPPER WITH XHHW
INSULATION.
1.
2.
3.
5.
LIGHTING FIXTURES COMPLETE WITH MOUNTING
ACCESSORIES TO MEET JOB REQUIREMENTS.
ALL FIXTURES SHALL BE SUPPORTED FROM THE BUILDING
STRUCTURE, INDEPENDENT OF HUNG CEILINGS.
THE ELECTRICAL CONTRACTOR SHALL VERIFY FIXTURE
MOUNTING AND LOCATION AGAINST PLANS, ELEVATIONS,
AND DETAIL DRAWINGS. EXACT LOCATION OF ALL
FIXTURES SHALL BE CONFIRMED WITH THE ARCHITECT
PRIOR TO ROUGHING IN.
OTHERWISE NOTED.
SERVING THE ROOM AHEAD OF SWITCH CONTROLS. PROVIDE
POWER PACKS AS REQUIRED FOR A FULLY FUNCTIONING SYSTEM.
SEE MECHANICAL DRAWINGS AND SPECIFICATIONS FOR
EXACT LOCATION OF MECHANICAL EQUIPMENT.
16.
DRAWINGS AND THE SPECIFICATIONS, THE
MOST STRINGENT SHALL PREVAIL. CONTACT THE
ENGINEER FOR CLARIFICAION WHEN SUCH A
SITUATION OCCURS.
GENERAL NOTES
REGULATIONS OF THE PERTINENT FEDERAL, STATE, COUNTY,
AND CITY AGENCIES. PROVIDE MATERIALS AND EQUIPMENT
THAT COMPLY WITH ANSI, IEEE, IES, AND NEMA STANDARDS.
PROVIDE ONLY MATERIALS THAT ARE U.L. LISTED AND LABELED.
CONDUIT RUNS ARE SHOWN DIAGRAMATICALLY. INSTALL
CONDUIT WITH A MINIMUM OF BENDS IN THE SHORTEST
PRACTICAL DISTANCE CONSIDERING THE BUILDINGS
CONSTRUCTION AND OBSTRUCTIONS, EXCEPT WHERE
OTHERWISE NOTED.
STARTERS THAT ARE NOT PROVIDED BY OTHER DIVISIONS,
SHALL BE PROVIDED BY DIVISION 26, UNLESS SPECIFICALLY
NOTED OTHERWISE.
AND PARTITIONS SHALL BE SEALED WITH UL APPROVED
FIRE SEALANT MATERIAL TO MAINTAIN THE RATING
OF THE SEPARATION.
MANUFACTURER, TYPE OR CATALOG NUMBER, SUCH
DESIGNATIONS ARE TO ESTABLISH STANDARDS OR
DESIRED QUALITY. ACCEPTANCE OR REJECTION OF
THE PROPOSED SUBSTITUTIONS SHALL BE SUBJECT
TO THE APPROVAL OF THE ENGINEER.
REFER TO ARCHITECTURAL DRAWINGS FOR EXACT
LOCATION OF EQUIPMENT, DEVICES, AND FURNITURE
REQUIREMENTS, PRIOR TO ROUGHING IN FOR SAME.
ALL GENERAL NOTES, SYMBOLS, LISTS, ABBREVIATIONS
AND DETAILS ARE TO BE CONSIDERED APPLICABLE TO
ALL ELECTRICAL DRAWINGS FOR THIS PROJECT.
IN AREAS AFFECTED BY THIS RENOVATION AND
ADJACENT AREAS THE CONTRACTOR SHALL MAINTAIN
CONTINUITY OF EXISTING ELECTRICAL SERVICE.
PRIOR TO REMOVAL OF EQUIPMENT, THE OWNER WILL
INDICATE WHICH EXISTING DEVICES OR MATERIALS
SHALL BE SALVAGED AND TURNED OVER FOR STORAGE.
WHERE EXISTING EQUIPMENT AND DEVICES ARE TO BE
RELOCATED, ALL ASSOCIATED WIRING, CONDUIT AND
ACCESSORIES SHALL BE EXTENDED, RELOCATED OR
REPLACED WHERE REQUIRED.
CONDITIONS TO BE ENCOUNTERED IN THE PERFORMANCE
OF THIS WORK. THE CONTRACTOR SHALL
COORDINATE THIS WORK WITH THE GENERAL CONTRACTOR
DURING CONSTRUCTION. FAILURE TO DO SO WILL NOT
RELIEVE THE CONTRACTOR OF THE
RESPONSIBILITY FOR FULL COMPLETION OF THE WORK
IN ACCORDANCE WITH APPLICABLE DRAWINGS AND
SPECIFICATIONS. VERIFY EXISTING SYSTEMS THAT WILL BE
UTILIZED FOR CONNECTION TO THE NEW SYSTEM. IF
DISCREPANCIES EXIST BETWEEN THE CONTRACT DRAWINGS
AND THE ACTUAL EXISTING CONDITIONS, THE
CONTRACTOR SHALL NOTIFY THE ENGINEER/OWNER
PRIOR TO PROCEEDING WITH THE INSTALLATION.
DOTTED INDICATES EXISTING EQUIPMENT
EXISTING
LAMPS, HANGERS, FITTINGS, ETC. FOR A COMPLETE AND PROPER INSTALLATION
ALL FIXTURES SHALL BE FURNISHED COMPLETE WITH ALL HARDWARE
LIGHTING FIXTURE SCHEDULE
LAMPS
28 277R C
ORIENTATE CENTER BASKETFLUXGRID SERIESDAY-BRITE
LED 28 INPUT WATTS.2BLT2-33LHE-ADSM-EZ1-LP835-*1LITHONIA LIGHTING
3300 LUMEN - 2x2 RECESSED "VOLUMETRIC" LED TROFFER WITH CENTER BASKET - ACT CEILING
48 120/277S D
4700 LUMEN - 8"x4' LED WRAP AROUND
48 INPUT WATTS.LAW4-35ML-EUCOLUMBIA LIGHTING
39 UNVR J
23 277W SLW
HARDWARE. PHOTOCELL ON/OFF
LED PROVIDE ALL NECESSARY MOUNTINGDSXW1 LED 20C 350 30K T3M MVOLT-DDBXDLITHONIA
LED WALL LUMINAIRE.
HARDWARE.
LED PROVIDE ALL NECESSARY MOUNTINGKAD LED 20C 530 30K R3 MVOLTLITHONIA
LED POLE LUMINAIRE DARK BRONZE WITH 10 FOOT SQUARE STRAIGHT STEEL DARK BRONZE POLE.
R J
HARDWARE.
LED PROVIDE ALL NECESSARY MOUNTINGKAD LED 20C 530 30K R5 MVOLTLITHONIA
##
E L E C T R I C A L L E G E N D LP-1,3 HOMERUN TO PNLBRD - ARROWS INDICATE NUMBER OF CIRCUITS. CROSS LINES INDICATE NUMBER
OF CONDUCTORS OTHER THAN TWO (PROVIDE NUMBER OF WIRES REQUIRED TO ALLOW SWITCHING
SHOWN - E10 SERIES LIGHTING DRAWINGS).
CIRCUIT NUMBER(S)
PANEL DESIGNATION
WIRING IN RACEWAY CONCEALED UNDER FLOOR/UNDER GROUND
2'x2' RECESSED LIGHTING FIXTURE - SEE LIGHTING FIXTURE SCHEDULE
2'x4' RECESSED LIGHTING FIXTURE - SEE LIGHTING FIXTURE SCHEDULE
RECESSED DOWNLIGHT - SEE LIGHTING FIXTURE SCHEDULE
PENDANT LIGHTING FIXTURE - SEE LIGHTING FIXTURE SCHEDULE
POLE MOUNTED AREA LIGHT - SEE LIGHTING FIXTURE SCHEDULEPOLE MOUNTED AREA LIGHT - SEE LIGHTING FIXTURE SCHEDULE
SINGLE POLE SWITCH - MOUNT C/L UP 48" UNLESS NOTED OTHERWISE
THREE-WAY SWITCH - MOUNT C/L UP 48" UNLESS NOTED OTHERWISE
FOUR-WAY SWITCH - MOUNT C/L UP 48" UNLESS NOTED OTHERWISE
0-10V DIMMER SWITCH - MOUNT C/L UP 48" UNLESS NOTED OTHERWISE
OC OCCUPANCY SENSOR AND POWER PACK - PROVIDE NUMBER OF POWER PACKS REQUIRED TO ALLOW
FOR NUMBER OF OCCUPANCY SENSORS AND SWITCHING SHOWN - DASHED LINE INDICATES GROUPING
OF SENSORS - SEE DETAIL ON E70 SERIES DRAWING
SUBLETTER INDICATES SWITCH CONTROL
A LETTER ADJACENT TO SYMBOL INDICATES SPECIAL MOUNTING DESIGNATION - SEE ITEM
DESCRIPTIONS BELOW
TAMPER RESISTANT DUPLEX CONVENIENCE RECEPTACLE - MOUNT C/L UP 24" UNLESS NOTED
OTHERWISE ON PLANS OR IN CLASSROOM RECEPTACLE MOUNTING HEIGHT TABLE BELOW - "A"
INDICATES MOUNT C/L UP 6" ABOVE COUNTER BACKSPLASH / C/L 48" WHERE NOT LOCATED AT A
COUNTER
TAMPER RESISTANT DOUBLE DUPLEX CONVENIENCE RECEPTACLE - MOUNT C/L UP 24" UNLESS
NOTED OTHERWISE ON PLANS OR IN CLASSROOM RECEPTACLE MOUNTING HEIGHT TABLE BELOW -
"A" INDICATES MOUNT C/L UP 6" ABOVE COUNTER BACKSPLASH / C/L 48" WHERE NOT LOCATED
AT A COUNTER
TAMPER RESISTANT GFCI DUPLEX CONVENIENCE RECEPTACLE - MOUNT C/L UP 48" UNLESS NOTED
OTHERWISE ON PLANS OR IN CLASSROOM RECEPTACLE MOUNTING HEIGHT TABLE BELOW - "A"
INDICATES MOUNT C/L UP 6" ABOVE COUNTER BACKSPLASH
SPECIAL RECEPTACLE - COORDINATE NEMA CONFIGURATION AND MOUNTING WITH FURNISHED
EQUIPMENT UNLESS NOTED
SINGLE GANG FLOOR BOX WITH DUPLEX DATA RECEPTACLE
FLUSH FLOOR REACH-IN DEVICE BOX-SEE DETAIL ON E70 SERIES DRAWING
DATA OUTLET LOCATION - JACK/S, FACEPLATE, WIRING, JUNCTION BOX WITH SINGLE GANG
RAISED RING AND TWO 1" CONDUIT TO ABOVE AN ACCESSIBLE CEILING - MOUNT UP SAME AS
ASSOCIATED RECEPTACLE UNLESS NOTED OTHERWISE
W DATA OUTLET LOCATION - JACK/S, FACEPLATE, WIRING, JUNCTION BOX WITH SINGLE GANG
RAISED RING AND ONE 1" CONDUIT TO ABOVE AN ACCESSIBLE CEILING - "W" INDICATES
PROVISIONS FOR WALL PHONE - MOUNT C/L UP 48" UNLESS NOTED OTHERWISE
DATA OUTLET LOCATION - JACK/S, FACEPLATE, WIRING, JUNCTION BOX WITH SINGLE GANG
RAISED RING AND TWO 1" CONDUIT TO ABOVE AN ACCESSIBLE CEILING - MOUNT UP SAME AS
ASSOCIATED RECEPTACLE UNLESS NOTED OTHERWISE
PROVISION FOR AUDIO VISUAL OUTLET/S - DEEP JUNCTION BOX WITH DOUBLE GANG RAISED RING
(UNLESS NOTED OTHERWISE) AND TWO 1 1/4" CONDUIT TO ABOVE AN ACCESSIBLE CEILING -
MOUNT UP SAME AS ASSOCIATED RECEPTACLE UNLESS NOTED OTHERWISE. SEE DETAILS ON
DRAWING E70.2
PROVISIONS FOR CCTV CAMERA - JUNCTION BOX WITH SINGLE GANG RAISED RING AND ONE 1"
CONDUIT TO ABOVE AN ACCESSIBLE CORRIDOR CEILING - MOUNTING HEIGHT AS INDICATED - SEE
ARCHITECTURAL EXTERIOR ELEVATIONS FOR MOUNTING HEIGHTS FOR ALL EXTERIOR LOCATIONS
CR PROVISIONS FOR ACCESS CONTROL CARD READER - SEE PROVISIONS FOR ACCESS CONTROL DETAIL
ON 70 SERIES DRAWING
DC PROVISIONS FOR ACCESS CONTROL MAGNETIC DOOR SWITCH - SEE PROVISIONS FOR ACCESS
CONTROL DETAIL ON E70 SERIES DRAWINGCONTROL DETAIL ON E70 SERIES DRAWING
J JUNCTION BOX
FUSED DISCONNECT SWITCH
VARIABLE FREQUENCY DRIVE FURNISHED BY DIVISION 23 AND INSTALLED AND WIRED BY
DIVISION 26 - COORDINATE EXACT LOCATION WITH DIVISION 23
ELECTRICAL MOTOR
PANELBOARD - 120/208V
PANELBOARD - 277/480V
F FIRE ALARM MANUAL PULL STATION - MOUNT C/L UP 48"
FIRE ALARM HORN / LIGHT UNIT - CANDLE POWER (CD) PER NFPA 72 AND AS NOTED - 15/75
WHERE NOT OTHERWISE INDICATED ON PLANS - MOUNT C/L UP 94" ON WALL
FIRE ALARM STROBE LIGHT UNIT - CANDLE POWER (CD) PER NFPA 72 AND AS NOTED - 15/75
WHERE NOT OTHERWISE INDICATED ON PLANS - MOUNT C/L UP 94" ON WALL
FIRE ALARM SYSTEM DUCT SMOKE DETECTOR WITH SAMPLING TUBE
FIRE ALARM COMBINATION SMOKE/CARBON MONOXIDE (CO) DETECTOR - CEILING MOUNTED -
COORDINATE EXACT LOCATION WITH MECHANICAL DIFFUSERS AND GRILLES - DO NOT LOCATE
WITHIN 5 FEET OF A MECHANICAL DIFFUSER OR GRILLE
HD FIRE ALARM HEAT DETECTOR - CEILING MOUNTED
AIM FIRE ALARM ADDRESSABLE INPUT MODULE
AOM FIRE ALARM ADDRESSIBLE OUTPUT MODULE
TS FIRE ALARM TAMPER SWITCH
FS FIRE ALARM FLOW SWITCH
DH ELECTRIC DOOR HOLDER / CLOSER - COORDINATE WITH DIVISION 08
EXIT SIGN WITH ARROWS AS INDICATED OR HATCH INDICATES FACE - CEILING MOUNTED - SEE
DETAIL ON E70 SERIES DRAWING FOR WIRING REQUIREMENTS
EXIT SIGN WITH ARROWS AS INDICATED OR HATCH INDICATES FACE - WALL MOUNTED C/L UP 18"
ABOVE DOOR - SEE DETAIL ON E70 SERIES DRAWING FOR WIRING REQUIREMENTS
CEILING MOUNTED EDGE LIT EXIT SIGN
EMERGENCY BATTERY UNIT - SEE DETAIL ON E70 SERIES DRAWING FOR WIRING REQUIREMENTS
EMERGENCY BATTERY UNIT CEILING MOUNTED - SEE DETAIL ON E70 SERIES DRAWING FOR WIRING
REQUIREMENTS
D P
L F
L P
L -1
-H 1
L P
L -1
-H 2B
A T
T B
A T
T DPHD
HC DOOR OPERATOR SHALL BE RELOCATED WITH ASSOCIATED
D10
VERIFY THAT ELECTRICAL POWER, LIGHTING
AND SYSTEMS ARE NOT AFFECTED BY THE
ALTERATIONS. PROVIDE ALL WORK AS
REQUIRED TO MAINTAIN POWER AND PROPER
OPERATION OF SYSTEMS.
EQUIPMENT TO BE REMOVED.
AND ALL ASSOCIATED WIRING BACK TO
PANELBOARD. COORDINATE WITH ALL TRADES
AND OWNER BEFORE DISCONNECTIONS ARE
MADE.
D10...
AND REWIRED AS INDICATED ON DRAWINGS OR
SHOWN.
D01
PNL
ELEV.
IDF
AREA.
VERIFY THAT ELECTRICAL POWER, LIGHTING
AND SYSTEMS ARE NOT AFFECTED BY THE
ALTERATIONS. PROVIDE ALL WORK AS
REQUIRED TO MAINTAIN POWER AND PROPER
OPERATION OF SYSTEMS.
WITH MECHANICAL PIPING, DUCT WORK AND
EQUIPMENT.
L04...
7"-6". WIRE LIGHTING AND INVERTER TO
ALLOW ON/OFF CONTROL OF LIGHTING
FIXTURES (SEE KEYNOTE L05) AND
FORCE LIGHTING ON LOSS OF NORMAL
UNSWITCHED POWER. PROVIDE LABEL:
POWER FIXTURE UPON LOSS OF POWER (FIXTURES
SHALL BE ALLOWED TO BE SWITCHED).
L09...
WIRING SHALL BE CONCEALED. WIRE FIXTURE
VIA PHOTOCELL AND INVERTER.
SEE E10-2 FOR CONTINUATION
OWNERS FUTURE DATA CABLING.
FF
FOR DATA/AV
COOLER.
P35...
CEILING MOUNTED PROJECTOR. COORDINATE
P41...
FURNISHED BY OWNER'S AV VENDOR AND INSTALLED
UNDER DIVISION 26. DIVISION 26 SHALL PROVIDE
ONE 1" CONDUIT FROM BACKBOX TO SOUND SYSTEM
RACK IN STORAGE ROOM.
PANEL. COORDINATE WITH DIVISION 22.
AT ALL PENETRATIONS.
PROVIDE FIRE STOPPING
TYPE AND SIZE OF WIRING PER
MANUFACTURERS REQUIREMENTS.
TYPE AND SIZE OF WIRING PER
MANUFACTURERS REQUIREMENTS.
1 FIRST FLOOR PART PLAN - AREA A SCALE: 1/8" = 1'-0"
03-26-2020 ADDENDUM #4
IDF ROOM 210 FOR DATA PATH. CORE DRILL
RUN 4" CONDUIT IN CHASE TO SECOND FLOOR
F
WIRE BASKET CABLE TRAY,
LPL1H2-40
PP1-13
RELOCATED
RELOCATED
COOLER.
P35...
CEILING MOUNTED PROJECTOR. COORDINATE
P41...
FURNISHED BY OWNER'S AV VENDOR AND INSTALLED
UNDER DIVISION 26. DIVISION 26 SHALL PROVIDE
ONE 1" CONDUIT FROM BACKBOX TO SOUND SYSTEM
RACK IN STORAGE ROOM.
PANEL. COORDINATE WITH DIVISION 22.
LPL1H1-31
LPL1H1-33
1 FIRST FLOOR PART PLAN - AREA B SCALE: 1/8" = 1'-0"
03-26-2020 ADDENDUM #4
W P
G F
P1-2
P1-2
P1-2
P1-2
P1-2
RTU-1
RTU-2
RTU-3
RTU-4
RTU-5
ENCLOSURE. LOCATE ADJACENT TO ROOF
MOUNTED HVAC EQUIPMENT.
OUTPUT MODULE TO SHUTDOWN AHU FAN.
WITH FIELD CONDITIONS
Drawing Scales
PA / PE:
WATTS
TUB 1 OF 1 - REMARKS:
EX CIRCUIT 20 1 1 1 0 0 --- --- 0 2 2 1 20 EX CIRCUIT
EX CIRCUIT 20 1 3 3 0 --- 0 --- 0 4 4 1 20 EX CIRCUIT
EX CIRCUIT 20 1 5 5 0 --- --- 0 0 6 6 1 20 EX CIRCUIT
EX CIRCUIT 20 1 7 7 0 0 --- --- 0 8 8 1 20 EX CIRCUIT
EX CIRCUIT 20 1 9 9 0 --- 0 --- 0 10 10 1 20 EX CIRCUIT
EX CIRCUIT 20 1 11 11 0 --- --- 0 0 12 12 1 20 EX CIRCUIT
EX CIRCUIT 20 1 13 13 0 0 --- --- 0 14 14 1 20 EX CIRCUIT
EX CIRCUIT 20 1 15 15 0 --- 0 --- 0 16 16 1 20 EX CIRCUIT
EX CIRCUIT 20 1 17 17 0 --- --- 0 0 18 18 1 20 EX CIRCUIT
EX CIRCUIT 20 1 19 19 0 0 --- --- 0 20 20 1 20 EX CIRCUIT
EX CIRCUIT 20 1 21 21 0 --- 0 --- 0 22 22 1 20 EX CIRCUIT
EX CIRCUIT 20 1 23 23 0 --- --- 0 0 24 24 1 20 EX CIRCUIT
EX CIRCUIT 20 1 25 25 0 0 --- --- 0 26 26 1 20 EX CIRCUIT
EX CIRCUIT 20 1 27 27 0 --- 0 --- 0 28 28 1 20 EX CIRCUIT
EX CIRCUIT 20 1 29 29 0 --- --- 0 0 30 30 1 20 EX CIRCUIT
* RCPT FILE STOR RM 20 1 31 31 1000 1000 --- --- 0 32 32 1 20 EX CIRCUIT
* RCPT FILE STOR RM 20 1 33 33 1000 --- 1000 --- 0 34 34 1 20 EX CIRCUIT
SPARE 20 1 35 35 0 --- --- 0 0 36 36 1 20 SPARE
SPARE 20 1 37 37 0 0 --- --- 0 38 38 1 20 EX CIRCUIT
EX CIRCUIT 20 1 39 39 0 --- 0 --- 0 40 40 1 20 EX CIRCUIT
EX CIRCUIT 20 1 41 41 0 --- --- 0 0 42 42 1 20 EX CIRCUIT
TOTAL AMPS: 5.6 1000 1000 0 TOTAL WATTS: 2000
REMARKS: EXISTING PANEL, PANEL FULL NAME LPL-1-H1. *=NEW CIRCUIT ON SPARE CIRCUIT BREAKER.
03/25/2020
WATTS
TUB 1 OF 1 - REMARKS:
EX CIRCUIT 20 1 1 1 0 0 --- --- 0 2 2 1 20 EX CIRCUIT
EX CIRCUIT 20 1 3 3 0 --- 0 --- 0 4 4 1 20 EX CIRCUIT
EX CIRCUIT 20 1 5 5 0 --- --- 0 0 6 6 1 20 EX CIRCUIT
EX CIRCUIT 20 1 7 7 0 0 --- --- 0 8 8 1 20 EX SPARE
* LTG FINANCIAL AID 20 1 9 9 616 --- 616 --- 0 10 10 1 20 EX SPARE
* LTG REGISTRAR 20 1 11 11 784 --- --- 784 0 12 12 1 20 EX SPARE
EX SPARE 20 1 13 13 0 0 --- --- 0 14 14 1 20 EX SPARE
EX CIRCUIT 20 1 15 15 0 --- 0 --- 0 16 16 1 20 EX CIRCUIT
EX CIRCUIT 20 1 17 17 0 --- --- 0 0 18 18 1 20 EX CIRCUIT
EX CIRCUIT 20 1 19 19 0 0 --- --- 0 20 20 1 20 EX CIRCUIT
EX SPARE 20 1 21 21 0 --- 0 --- 0 22 22 1 20 EX SPARE
EX SPARE 20 1 23 23 0 --- --- 0 0 24 24 1 20 EX SPARE
EX SPARE 20 1 25 25 0 0 --- --- 0 26 26 1 20 EX SPARE
EX SPARE 20 1 27 27 0 --- 0 --- 0 28 - 1 SPACE
SPACE 1 - 29 0 --- --- 0 0 30 - 1 SPACE
SPACE 1 - 31 0 0 --- --- 0 32 - 1 SPACE
SPACE 1 - 33 0 --- 0 --- 0 34 - 1 SPACE
SPACE 1 - 35 0 --- --- 0 0 36 - 1 SPACE
EX CIRCUIT 15 3 37 37 0 0 --- --- 0 38 38 3 15 EX CIRCUIT
- - - 39 --- 0 --- 40 - - -
- - - 41 --- --- 0 42 - - -
TOTAL AMPS: 1.7 0 616 784 TOTAL WATTS: 1400
REMARKS: EXISTING PANEL, PANEL FULL NAME LPL-1-G. * = EX SPARE CB NEW CIRCUIT.
03/25/2020
WATTS
TUB 1 OF 1 - REMARKS:
EX UPS SERVER ROOM 100 3 1 1 0 0 --- --- 0 2 - 1 SPACE
- - - 3 --- 0 --- 0 4 - 1 SPACE
- - - 5 --- --- 0 0 6 - 1 SPACE
SPACE 1 - 7 0 0 --- --- 0 8 - 1 SPACE
SPACE 1 - 9 0 --- 0 --- 0 10 - 1 SPACE
SPACE 1 - 11 0 --- --- 0 0 12 - 1 SPACE
* PANEL P1 100 3 13 13 0 0 --- --- 0 14 - 1 SPACE
- - - 15 --- 0 --- 0 16 - 1 SPACE
- - - 17 --- --- 0 0 18 - 1 SPACE
EX LPL-1-H1 & H2 100 3 19 19 0 0 --- --- 0 20 20 3 100 EX LPL-1-15
- - - 21 --- 0 --- 22 - - -
- - - 23 --- --- 0 24 - - -
EX LPL-J1 LPL-J2 150 3 25 25 0 0 --- --- 0 26 SPACE USED BY 150A CB
- - - 27 --- 0 --- 28 - - -
- - - 29 --- --- 0 30 - - -
- - - 31 0 --- --- 32 - - -
- - - 33 --- 0 --- 34 - - -
- - - 35 --- --- 0 36 - - -
- - - 37 0 --- --- 38 - - -
- - - 39 --- 0 --- 40 - - -
- - - 41 --- --- 0 42 - - -
REMARKS: EXISTING PANELBOARD, * = EX SPARE CB, NEW CIRCUIT
03/25/2020
WATTS
TUB 1 OF 1 - REMARKS:
RCPT OFFICE 180C 20 1 1 1 1260 2160 --- --- 900 2 2 1 20 RCPT ROOF TOP
RCPT OFFICE 180A, B 20 1 3 3 1800 --- 3244 --- 1444 4 4 1 20 BOILER B-1 & CP1
RCPT OPEN OFFICE 180 20 1 5 5 1440 --- --- 2884 1444 6 6 1 20 BOILER B-2 & CP2
RCPT OPEN OFFICE 180 20 1 7 7 1800 2340 --- --- 540 8 8 1 20 RCPT UTILITY RM
RCPT OPEN OFFICE 180 FLR BOX 20 1 9 9 180 --- 360 --- 180 10 10 1 20 RCPT STORAGE
RCPT CONF RM 174 20 1 11 11 720 --- --- 1080 360 12 12 1 20 RCPT AV RACK
RCPT WAITING 170 20 1 13 13 360 1056 --- --- 696 14 14 1 20 PROJECTOR SCREEN
RCPT EIS OFFICE 173 20 1 15 15 900 --- 1596 --- 696 16 16 1 20 PROJECTOR SCREEN
RCPT EIS 172 20 1 17 17 1440 --- --- 2440 1000 18 18 1 20 RCPT CEILING PROJECTOR
RCPT EIS 172 20 1 19 19 720 1720 --- --- 1000 20 20 1 20 RCPT CEILING PROJECTOR
RCPT RECEPTION 171 FLR BOX 20 1 21 21 180 --- 360 --- 180 22 22 1 20 RCPT EXTERIOR
RCPT RECEPT/HUB 20 1 23 23 360 --- --- 860 500 24 24 1 20 SHADE CONTROLLER
RCPT RECEPT/HUB 20 1 25 25 180 360 --- --- 180 26 26 1 20 RCPT EIS COUNTER
RCPT RECEPT/HUB 20 1 27 27 360 --- 720 --- 360 28 28 1 20 RCPT EIS COUNTER
RCPT FUNCTION RM A WALL 20 1 29 29 1440 --- --- 1800 360 30 30 1 20 RCPT ADMISSIONS COUNTER
RCPT FUNCTION RM A WALL 20 1 31 31 1080 2080 --- --- 1000 32 32 1 20 RCPT ADMISSIONS PRT
RCPT FUNCTION RM A FLR BOX 20 1 33 33 1720 --- 1720 --- 0 34 34 1 20 SPARE
RCPT FUNCTION RM B WALL 20 1 35 35 1620 --- --- 1620 0 36 36 1 20 SPARE
RCPT FUNCTION RM B EQUIP. 20 1 37 37 720 720 --- --- 0 38 38 1 20 SPARE
RCPT FUNCTION RM B EQUIP. 20 1 39 39 720 --- 720 --- 0 40 40 1 20 SPARE
RCPT FUNCTION RM B FLR BOX 20 1 41 41 720 --- --- 720 0 42 42 1 20 SPARE
TOTAL AMPS: 84.9 10436 8720 11404 TOTAL WATTS: 30560
REMARKS: NEW PANELBOARD
WATTS
TUB 1 OF 1 - REMARKS:
LTG HUB 20 1 1 1 288 8366 --- --- 24233 2 2 3 40 RTU-1
LTG PRESENTATION ROOM 20 1 3 3 1537 --- 9615 --- 4 - - -
LTG ADMIN 20 1 5 5 1703 --- --- 9781 6 - - -
LTG EXTERIOR 20 1 7 7 138 2487 --- --- 7046 8 8 3 15 RTU-2
LTG UTILITY SPACES 20 1 9 9 336 --- 2685 --- 10 - - -
SPARE 20 1 11 11 0 --- --- 2349 12 - - -
SPARE 20 1 13 13 0 2771 --- --- 8313 14 14 3 15 RTU-3
SPARE 20 1 15 15 0 --- 2771 --- 16 - - -
SPARE 20 1 17 17 0 --- --- 2771 18 - - -
SPARE 20 1 19 19 0 2349 --- --- 7046 20 20 3 15 RTU-4
SPARE 20 1 21 21 0 --- 2349 --- 22 - - -
SPARE 20 1 23 23 0 --- --- 2349 24 - - -
SPACE 1 - 25 0 8078 --- --- 24233 26 26 3 40 RTU-5
SPACE 1 - 27 0 --- 8078 --- 28 - - -
SPACE 1 - 29 0 --- --- 8078 30 - - -
SPACE 1 - 31 0 942 --- --- 2826 32 32 3 15 PUMP P-1
SPACE 1 - 33 0 --- 942 --- 34 - - -
SPACE 1 - 35 0 --- --- 942 36 - - -
SPACE 1 - 37 0 942 --- --- 2826 38 38 3 15 PUMP P-2
SPACE 1 - 39 0 --- 942 --- 40 - - -
SPACE 1 - 41 0 --- --- 942 42 - - -
TOTAL AMPS: 96.9 25933 27380 27212 TOTAL WATTS: 80525
REMARKS: NEW PANELBOARD
WATTS
TUB 1 OF 1 - REMARKS: EXISTING SIEMENS PANEL TYPE P2
TRANSFORMER DT2 175 3 1 1 0 0 --- --- 0 2 SPACE USED BY 175A/CB
- - - 3 --- 0 --- 4 - - -
- - - 5 --- --- 0 6 - - -
SPACE 1 - 7 0 0 --- --- 0 8 - 1 SPACE
SPACE 1 - 9 0 --- 0 --- 0 10 - 1 SPACE
SPACE 1 - 11 0 --- --- 0 0 12 - 1 SPACE
* PANEL H1 125 3 13 13 0 0 --- --- 0 14 - 1 SPACE
- - - 15 --- 0 --- 0 16 - 1 SPACE
- - - 17 --- --- 0 0 18 - 1 SPACE
PANEL M1 MECH ROOM 125 3 19 19 0 0 --- --- 0 20 20 3 100 LTG PNL LPH-1-G
- - - 21 --- 0 --- 22 - - -
- - - 23 --- --- 0 24 - - -
SPARE 100 3 25 25 0 0 --- --- 0 26 26 3 100 SPARE
- - - 27 --- 0 --- 28 - - -
- - - 29 --- --- 0 30 - - -
- - - 37 0 --- --- 38 - - -
- - - 39 --- 0 --- 40 - - -
- - - 41 --- --- 0 42 - - -
REMARKS: EXISTING PANELBOARD. * NEW CIRCUIT BREAKER AND CIRCUIT
03/25/2020
WATTS
TUB 1 OF 1 - REMARKS:
*1 RCPT DIR 137A 20 1 1 1 1080 2160 --- --- 1080 2 2 1 20 *1 RCPT DATA MANAGEMENT
*1 RCPT OFFICES 137B & C 20 1 3 3 1800 --- 2880 --- 1080 4 4 1 20 *1 RCPT OFFICE
EX CIRCUIT 20 1 5 5 0 --- --- 1260 1260 6 6 1 20 *1 RCPT OFFICE
EX CIRCUIT 20 1 7 7 0 0 --- --- 0 8 8 1 20 EX CIRCUIT
EX CIRCUIT 20 1 9 9 0 --- 0 --- 0 10 10 1 20 EX CIRCUIT
EX CIRCUIT 20 1 11 11 0 --- --- 0 0 12 12 1 20 EX CIRCUIT
EX CIRCUIT 20 1 13 13 0 0 --- --- 0 14 14 1 20 EX CIRCUIT
EX CIRCUIT 20 1 15 15 0 --- 0 --- 0 16 16 1 20 EX CIRCUIT
EX CIRCUIT 20 1 17 17 0 --- --- 0 0 18 18 1 20 EX CIRCUIT
EX CIRCUIT 20 1 19 19 0 0 --- --- 0 20 20 1 20 EX CIRCUIT
EX CIRCUIT 20 1 21 21 0 --- 0 --- 0 22 22 1 20 EX CIRCUIT
EX CIRCUIT 20 1 23 23 0 --- --- 0 0 24 24 1 20 EX CIRCUIT
RCPT COPY AREA COUNTER 20 1 25 25 180 180 --- --- 0 26 26 1 20 EX CIRCUIT
RCPT COPY AREA 20 1 27 27 1000 --- 1000 --- 0 28 28 1 20 EX CIRCUIT
EX CIRCUIT 20 1 29 29 0 --- --- 1080 1080 30 30 1 20 * RCPT FINANCIAL. AID WORK AREA
EX CIRCUIT 20 1 31 31 0 1080 --- --- 1080 32 32 1 20 * RCPT FINANCIAL. AID WORK AREA
* RCPT OFFICE 138C&138 20 1 33 33 540 --- 1080 --- 540 34 34 1 20 * RCPT FINANCIAL. AID WORK AREA
* RCPT DISPLAY 20 1 35 35 540 --- --- 1260 720 36 36 1 20 * RCPT REG OPEN AREA
* RCPT WATER COOLER 20 1 37 37 540 1080 --- --- 540 38 38 1 20 * RCPT REG OPEN AREA
* RCPT UTILITY139 20 1 39 39 180 --- 720 --- 540 40 40 1 20 * RCPT MAC LAB
* RCPT FINANCIAL. AID WORK AREA 20 1 41 41 180 --- --- 1180 1000 42 42 1 20 * RCPT FINANCIAL AID PRT
TOTAL AMPS: 41.6 4500 5680 4780 TOTAL WATTS: 14960
REMARKS: EXISTING PANEL, PANEL FULL NAME LPL-1-H2. *=NEW CIRCUIT BREAKER, CIRCUIT 37-GFCI CB. *1 CIRCUIT BREAKER REPURPOSED.
03/25/2020
WATTS
TUB 1 OF 1 - REMARKS:
RCPT IT (WALL RACEWAY) 20 1 1 1 720 720 --- --- 0 2 2 1 20 SPARE
RCPT IT (WALL RACEWAY) 20 1 3 3 720 --- 720 --- 0 4 4 1 20 SPARE
RCPT IT (WALL RACEWAY) 20 1 5 5 720 --- --- 720 0 6 6 1 20 SPARE
RCPT IT (WALL RACEWAY) 20 1 7 7 720 720 --- --- 0 8 8 1 20 SPARE
RCPT IT (WALL RACEWAY) 20 1 9 9 720 --- 720 --- 0 10 10 1 20 SPARE
RCPT BOOK STORE OFFICES 20 1 11 11 0 --- --- 0 0 12 12 1 20 SPARE
RCPT LOBBY 20 1 13 13 360 360 --- --- 0 14 14 1 20 SPARE
SPARE 20 1 15 15 0 --- 0 --- 0 16 16 1 20 SPARE
SPARE 20 1 17 17 0 --- --- 0 0 18 18 1 20 SPARE
SPARE 20 1 19 19 0 0 --- --- 0 20 20 1 20 SPARE
SPARE 20 1 21 21 0 --- 0 --- 0 22 22 1 20 SPARE
SPARE 20 1 23 23 0 --- --- 0 0 24 24 1 20 SPARE
SPARE 20 1 25 25 0 0 --- --- 0 26 26 1 20 SPARE
SPARE 20 1 27 27 0 --- 0 --- 0 28 28 1 20 SPARE
SPARE 20 1 29 29 0 --- --- 0 0 30 30 1 20 SPARE
- - - 31 0 --- --- 32 - - -
- - - 33 --- 0 --- 34 - - -
- - - 35 --- --- 0 36 - - -
- - - 37 0 --- --- 38 - - -
- - - 39 --- 0 --- 40 - - -
- - - 41 --- --- 0 42 - - -
REMARKS: NEW PANELBOARD
WATTS
TUB 1 OF 1 - REMARKS:
EX LPL-1-B, LPL-2-C 150 3 1 1 0 0 --- --- 0 2 - 1 SPACE
- - - 3 --- 0 --- 0 4 - 1 SPACE
- - - 5 --- --- 0 0 6 - 1 SPACE
SPACE USED BY 150A CB 1 - 7 0 0 --- --- 0 8 - 1 SPACE
SPACE USED BY 150A CB 1 9 9 0 --- 0 --- 0 10 - 1 SPACE
SPACE USED BY 150A CB 1 11 11 0 --- --- 0 0 12 - 1 SPACE
EX LPL-B-E 100 3 13 13 0 0 --- --- 0 14 14 3 100 EX LPL-1-K
- - - 15 --- 0 --- 16 - - -
- - - 17 --- --- 0 18 - - -
EX LPL-B-BR 100 3 19 19 0 0 --- --- 0 20 20 3 100 * PP1
- - - 21 --- 0 --- 22 - - -
- - - 23 --- --- 0 24 - - -
SPACE 1 - 25 0 0 --- --- 0 26 - 1 SPACE
SPACE 1 - 27 0 --- 0 --- 0 28 - 1 SPACE
SPACE 1 - 29 0 --- --- 0 0 30 - 1 SPACE
SPACE 1 - 31 0 0 --- --- 0 32 - 1 SPACE
SPACE 1 - 33 0 --- 0 --- 0 34 - 1 SPACE
SPACE 1 - 35 0 --- --- 0 0 36 - 1 SPACE
SPACE 1 - 37 0 0 --- --- 0 38 - 1 SPACE
EX TEMP PWR 60 2 39 39 0 --- 0 --- 0 40 40 2 50 EX TEMP PWR
- - - 41 --- --- 0 42 - - -
REMARKS: EXISTING PANELBOARD SQUARE-D NQOD. * = NEW CIRCUIT BREAKER AND CIRCUIT.
03/25/2020
4. REFER TO E20 SERIES DRAWINGS FOR POWER SUPPLY LOCATION.
5. ALL CONDUITS SHALL BE CONCEALED. COORDINATE WITH DIVISION 08.
NOTES:
1. CONDUIT AND JUNCTION BOXES PROVIDED UNDER DIVISION 26. LOW VOLTAGE WIRING,
AND POWER SUPPLIES PROVIDED BY OWNERS CARD ACCESS CONTROLS VENDOR.
2. REFER TO ARCHITECTURAL FLOOR PLAN DRAWINGS (A10 SERIES) FOR DOOR NUMBERS
AND LOCATIONS.
3. COORDINATE WITH DIVISION 08 DOOR HARDWARE AND OWNER'S CARD ACCESS
CONTROL VENDOR.
Drawing Scales
PA / PE:
EXIT CAPACITY = 340
EXIT CAPACITY = 340
PATH OF EGRESS TRAVEL
FIRE ALARM CONTROL PANEL
FIRE ALARM HORN/STROBE
FIRE ALARM STROBE
ILLUMINATED EXIT SIGN
MAGNETIC DOOR HOLDER
SEPARATION REQUIRMENTS
DENOTES 2 HOUR RATED FIRE BARRIER ASSEMBLY
NOTE: CONTRACTOR TO SEAL ANY NEW OR EXISTING PENETRATIONS THROUGH THE REFERENCED WALL TYPES LABELED ON THESE PLANS. REFER TO A40 SERIES DRAWINGS FOR DETAILS.
2 HR DENOTES 2 HOUR RATED FIRE WALL ASSEMBLY
CODE COMPLIANCE
BUILDING DESIGN CODES:
AMERICANS WITH DISABILITIES ACT (ADA) NFPA 1 NFPA 101 LIFE SAFETY CODE / 2015
INTERNATIONAL BUILDING CODE / 2015 INTERNATIONAL EXISTING BUILDING CODE / 2015 MAINE UNIFORM BUILDING and ENERGY CODE / 2015 UNIFORM PLUMBING CODE / 2015 NFPA 13 STANDARD FOR THE INSTALLATION OF SPRINKLER SYSTEMS INTERNATIONAL ENERGY CONSERVATION CODE / 2009 INTERNATIONAL MECHANICAL CODE / 2015 ASHRAE / IES STANDARD 90.1 - 2013 NFPA 70 NATIONAL ELECTRIC CODE / 2017
CONSTRUCTION TYPE:
BUILDING AREA:
EXISTING TO REMAIN 41,713 NET SF NEW FLOOR AREA 8,303 NET SF TOTAL 50,016 NET SF
ALLOWABLE (IBC) BUSINESS OCCUPANCY W/ SPRINKLER BASE (TYPE IIB) SINGLE STORY: 69,000 SF MAX
OCCUPANCY CLASSIFICATION:
NFPA: NEW ASSEMBLY (CHAPTER 12) NEW EDUCATION (CHAPTER14) EXISTING EDUCATION (CHAPTER15) MULTIPLE OCCUPANCIES TABLE 6.1.14.1.3
IBC: BUSINESS GROUP B (SECTION 303.1.3 WITH
ASSOCIATED ASSEMBLY)
OCCUPANCY LOADS: (PER PERSON)
OFFICE (BUSINESS) 100 SF GROSS CLASSROOM: 20 SF NET CAFETERIA: 15 SF NET KITCHEN: 200 SF GROSS (IBC)
100 SF GROSS (NFPA) STORAGE: 300 SF GROSS MECHANICAL: 300 SF GROSS
NUMBER OF STORIES:
ALLOWABLE: 75'-0"
FIRE SUPPRESSION:
MEANS OF EGRESS (WITH SPRINKLER SYSTEM)
EXIT ACCESS TRAVEL: IBC: 250' NFPA: 200'
CORRIDOR FIRE-RESISTIVE RATING: IBC: NO REQUIREMENT NFPA: NO REQUIRMENT
COMMON PATH OF TRAVEL (CPT): IBC: 100' NFPA: 100'
DEAD END CORRIDOR: IBC: 50' NFPA: 50'
Graphic Sc ale
AUBURN PORTLAND PORTSMOUTHBOSTON
Graphic Sc ale
Harriman Project No.
CAMPUS WELCOME CENTER
OFFICE
OCC:5
171 SF OFFICE
163 SF OFFICE
675 SF CONFERENCE
OCC:45159 SF OFFICE
75 SF D.O.S. STOR
193 SF STAIR NE
1 6
1 6
MAXIMUM EXIT TRAVEL DISTANCE TO FIRST FLOOR SAFE HAVEN: 191'
839 SF MECHANICAL
548 SF STORAGE
1019 SF STORAGE
63 SF ELEVATOR
68 SF E.M.R.
124 SF IT-TEL
135 SF ELECTRICAL
397 SF CORRIDOR
Graphic Sc ale
AUBURN PORTLAND PORTSMOUTHBOSTON
Graphic Sc ale
Harriman Project No.
CAMPUS WELCOME CENTER
CAMPUS WELCOME CENTER
FLANGE SIZE (IN)
RPM SPEED HORSEPOWER Phase VOLTS NOTES
CP-1 TACO 1915 CIRCULATOR 25.0 32 5.75 1 1/2" 1760 1/4 1 120 V POWERED FROM BOILER B-1
CP-2 TACO 1915 CIRCULATOR 25.0 32 5.75 1 1/2" 1760 1/4 1 120 V POWERED FROM BOILER B-2
P-1 TACO KV 2009D VERTICAL INLINE
50.0 65 7.5" 2" 1760 2 3 460 V
P-2 TACO KV 2009D VERTICAL INLINE
50.0 65 7.5" 2" 1760 2 3 460 V
BOILER SCHEDULE
OUTPUT (MBH) GPM VOLTS CURRENT
B-2 Viessmann Vitodens 200 B2HA-80-100 NG 71-352 67-333 25 120 12A
B-1 Viessmann Vitodens 200 B2HA-80-100 NG 71-352 67-333 25 120 12A
AIR SEPARATOR SCHEDULE
DIAMETER (IN)
AS-1 TACO 49025ADR-125 HOT WATER 2 1/2" 75 10 20
FINTUBE RADIATION SCHEDULE
(IN.) CAPACITY
ENCLOSURE DIMENSIONS
W x H (IN.) NOTES A STERLING VERSALINE SS STYLE C3/4-435 3/4" 700 3-1/4" SQ. 50 2 5 5/16x29 1/2
B STERLING DURAVANE JDVPB2 C45 1" 780 3-1/4" SQ. 50 2 10 7/8x11
EXPANSION TANK SCHEDULE
(GAL.)
MIN TEMP. (DEG. F)
MAX TEMP (DEG .F)
WEIGHT (LBS) NOTES
ET-1 TACO CA90-125 HOT WATER 23.0 150.0 90 140 20 30 200
REGISTERS, GRILLES & DIFFUSERS SCHEDULE
TAG MANUFACTURER MODEL TYPE NECK
SIZE (IN) DIRECTION OF BLOW MAX NC MAX SP DAMPER FINISH BORDER NOTES
R1 PRICE INDUSTRIES 80 SERIES GRID CORE 18 x 18 N/A 20 0.09 in-wg NONE BAKED ENAMEL WHITE
LAY IN
R2 PRICE INDUSTRIES 80 SERIES GRID CORE 12 x 12 N/A 20 0.09 in-wg NONE BAKED ENAMEL WHITE
LAY IN
R4 PRICE INDUSTRIES 80 SERIES GRID CORE 22 x 22 N/A 20 0.09 in-wg NONE BAKED ENAMEL WHITE
LAY IN
R5 PRICE INDUSTRIES 80 SERIES GRID CORE 24 x 48 N/A 20 0.01 in-wg NONE BAKED ENAMEL WHITE
LAY IN
S1 PRICE INDUSTRIES 510 SERIES LOUVERED SUPPLY 12 x 12 N/A 20 0.09 in-wg NONE BAKED ENAMEL WHITE
LAY IN
S2 PRICE INDUSTRIES 510 SERIES LOUVERED SUPPLY 10 x 10 N/A 20 0.00 in-wg NONE BAKED ENAMEL WHITE
LAY IN
SURFACE MOUNT
SURFACE MOUNT
SURFACE MOUNT
T1 PRICE INDUSTRIES LBMH SERIES 24" LINEAR BAR GRILLE 24"x5" PLENUM
N/A 25 0.00 in-wg NONE BAKED ENAMEL WHITE
SURFACE MOUNT
WPD (IN. WG) NOTES
RHC-1 DAIKIN VEST 161 12" 12" 1 11.3 335 55 85 0.10 1.25 180 160 0.10
RHC-2 DAIKIN VEST 162 12" 12" 1 11.3 335 55 85 0.10 1.25 180 160 0.10
VAV SCHEDULE
TAG MANUFAC
TURER MODEL
DISCHAR GE NC NOTESROOM #
VAV-1 DAIKIN MQTHI5 137 6" 250 150 150 110.4 55 0.02 6.1 180 164 °F 0.8 GPM 0.01 1 12 1,2,3
VAV-2 DAIKIN MQTHI5 137 6" 250 150 150 110.4 55 0.02 6.1 180 164 °F 0.8 GPM 0.01 1 12 1,2,3
VAV-3 DAIKIN MQTHI5 137C 4" 100 50 50 106.3 55 0.02 4.1 180 159 °F 0.4 GPM 0.01 1 7 1,2,3
VAV-4 DAIKIN MQTHI5 137B 10" 400 150 150 105.7 55 0.01 8.2 180 159 °F 0.8 GPM 0.01 1 20 1,2,3
VAV-5 DAIKIN MQTHI5 137A 8" 500 250 250 90.8 55 0.08 9.7 180 158 °F 0.9 GPM 0.05 1 22 1,2,3
VAV-6 DAIKIN MQTHI5 143B 8" 230 160 160 100.4 55 0.04 7.8 180 162 °F 0.9 GPM 0.02 1 12 1,2,3
VAV-7 DAIKIN MQTHI5 143C 4" 150 100 100 105..5 55 0.04 5.4 180 167 °F 0.9 GPM 0.01 1 9 1,2,3
VAV-8 DAIKIN MQTHI5 143D 8" 250 150 150 100 55 0.04 7.3 180 159 °F 0.7 GPM 0.01 1 12 1,2,3
VAV-9 DAIKIN MQTHI5 143 8" 400 300 300 901 55 0.08 11.6 180 164 °F 1.5 GPM 0.04 1 11 1,2,3
VAV-10 DAIKIN MQTHI5 138B 6" 200 100 100 100.5 55 0.04 5.9 180 165 °F 0.8 GPM 0.01 1 12 1,2,3
NOTES: 1. SINGLE DUCT - STANDARD PROFILE. 2. DAIKIN CONTROLLER FACTORY MOUNTED & COMMISSIONED. 3. 120/24 VOLT SINGPE PHASE TRANSFORMER.
HOT WATER HEATING COIL SCHEDULE
TAG MANUFAC
WPD (IN. WG) NOTES
HWC-1 DAIKIN RTU-1 36" 30" 1 57.8 3300 65 81 0.13 5.50 130 109 0.60
HWC-2 DAIKIN RTU-2 30" 24" 1 28.7 1500 63 80 0.06 2.90 130 110 0.20
HWC-3 DAIKIN RTU-3 42" 24" 1 43.6 2600 65 80 0.09 4.30 130 110 0.60
HWC-4 DAIKIN RTU-4 24" 24" 1 52.2 1200 41 81 0.12 5.10 130 110 0.20
HWC-5 DAIKIN RTU-5 54" 33" 1 89.1 4200 61 81 0.08 8.70 130 110 1.50
PACKAGED ROOFTOP HVAC UNIT SCHEDULE
TAG MANUFACTURER MODEL SERVICE
WEIGHT (LBS) NOTES
SUPPLY AIR (CFM)
RTU-1 Daikin DCC150-H Admissions Area
3300 220 1.25 1165-1760 2.42 3 76/61 55/51.8 R410-A 146 97 2 1 2/.33 1075 95 480 29.8 40 1175.00
RTU-2 Daikin DSC048-V Central Offices
1500 120 1.25 1725 0.71 1 76.3/62.3 55/53.1 R410-A 47 35 1 1 1/.25 1050 95 480 11.9 15 570.00
RTU-3 Daikin DSC048-V Hub 160 2600 140 1.25 1760 1.05 1 76.5/61.5 55/52.3 R410-A 58 43 1 1 1/.25 1075 95 480 10 15 570.00
RTU-4 Daikin DSC048-V Function B 163
1200 440 1.25 1725 0.53 1 77.1/66.3 55/53.3 R410-A 47 35 1 1 1/.25 1050 95 480 11.9 15 570.00
RTU-5 Daikin DCC150-V Function A 164
4200 500 1.25 1165-1760 2.48 3 76/64.6 53.6/ R410-A 146 97 2 1 2/.33 1075 95 480 29.8 40 1175.00
NOTES: 1. DIFFUSERS SHALL BE MODEL SD100 WITH 1" SLOT WIDTH. 2. LINEAR BAR GRILLES SHALL BE CORE 16B, 5" WIDTH
2
1
1
1
CONDUCTORS & #12 GND. HOMERUNS FED FROM 20A, SINGLE
POLE CIRCUITS IN EXCESS OF 100 FEET SHALL BE #10 AWG
UNLESS INDICATED OTHERWISE. INSULATION TYPE SHALL BE
THHN/TWHN, 75 DEG. C, AND 600V CLASS UNLESS SPECIFIED
OTHERWISE.
FLEXIBLE LIQUID TIGHT CONDUIT.
2019). THE INTENT OF THE EXISTING CONDITIONS PLAN(S) IS TO
DOCUMENT EXISTING CONDITIONS. HOWEVER, ALL ELECTRICAL
DEVICES MAY NOT NECESSARILY BE INDICATED ON THE
DRAWINGS. FIELD VERIFY AND ADJUST WORK TO SUIT ALL FOUND.
2. REFER TO NON-DEMO PLANS TO DETERMINE EXTENT OF WORK
IN EACH AREA, INCLUDING WHETHER DEVICES ARE TO REMAIN,
BE REMOVED, REPLACED, ETC... EXCEPT AS NOTED, GENERALLY
THE INTENT IS THAT IF EXISTING DEVICES ARE SHOWN ON THE EXISTING
CONDITIONS PLANS AND NEW DEVICES ARE SHOWN ON THE NON-DEMO
PLANS THEN EXISTING DEVICES ARE TO BE REMOVED. IF EXISTING
DEVICES ARE SHOWN ON BOTH THEN DEVICES ARE TO REMAIN.
3. ALL EXISTING ITEMS INTENDED FOR REMOVAL SHALL BE REMOVED
WITH ALL ASSOCIATED HARDWARE INCLUDING, BUT NOT LIMITED TO:
CONDUIT, BOXES, WIRING, CABLES, HANGERS, ETC...
4. COORDINATE WITH MECHANICAL AND PLUMBING DRAWINGS FOR
MECHANICAL AND PLUMBING EQUIPMENT TO BE REMOVED. REMOVE
ALL ASSOCIATED CONDUIT, BOXES, WIRING, ETC...
5. CONDUIT IN GOOD CONDITION AND PROPERLY LOCATED MAY BE
REUSED WHERE APPLICABLE, UNLESS NOTED OTHERWISE.
ALL REUSED CONDUITS SHALL BE CLEARED WITH MANDREL AND
SWABBED CLEANED BEFORE INSTALLATION OF CONDUCTORS.
6. IN AREAS NOT RENOVATED BY THIS CONTRACT VERIFY THAT
ELECTRICAL POWER, LIGHTING AND SYSTEMS ARE NOT AFFECTED
BY THE ALTERATIONS. PROVIDE ALL WORK AS REQUIRED TO
MAINTAIN POWER AND PROPER OPERATION OF SYSTEMS.
7. PROVIDE WORK REQUIRED TO MAINTAIN EXISTING COMMUNICATIONS
CABLING SERVING PORTIONS OF THIS BUILDING AND CAMPUS THAT IS
NOT PART OF THIS RENOVATION OR PHASE OF WORK.
DEMOLITION NOTES:
FEEDER WIRING SHALL BE 600V, COPPER WITH XHHW
INSULATION.
1.
2.
3.
5.
LIGHTING FIXTURES COMPLETE WITH MOUNTING
ACCESSORIES TO MEET JOB REQUIREMENTS.
ALL FIXTURES SHALL BE SUPPORTED FROM THE BUILDING
STRUCTURE, INDEPENDENT OF HUNG CEILINGS.
THE ELECTRICAL CONTRACTOR SHALL VERIFY FIXTURE
MOUNTING AND LOCATION AGAINST PLANS, ELEVATIONS,
AND DETAIL DRAWINGS. EXACT LOCATION OF ALL
FIXTURES SHALL BE CONFIRMED WITH THE ARCHITECT
PRIOR TO ROUGHING IN.
OTHERWISE NOTED.
SERVING THE ROOM AHEAD OF SWITCH CONTROLS. PROVIDE
POWER PACKS AS REQUIRED FOR A FULLY FUNCTIONING SYSTEM.
SEE MECHANICAL DRAWINGS AND SPECIFICATIONS FOR
EXACT LOCATION OF MECHANICAL EQUIPMENT.
16.
DRAWINGS AND THE SPECIFICATIONS, THE
MOST STRINGENT SHALL PREVAIL. CONTACT THE
ENGINEER FOR CLARIFICAION WHEN SUCH A
SITUATION OCCURS.
GENERAL NOTES
REGULATIONS OF THE PERTINENT FEDERAL, STATE, COUNTY,
AND CITY AGENCIES. PROVIDE MATERIALS AND EQUIPMENT
THAT COMPLY WITH ANSI, IEEE, IES, AND NEMA STANDARDS.
PROVIDE ONLY MATERIALS THAT ARE U.L. LISTED AND LABELED.
CONDUIT RUNS ARE SHOWN DIAGRAMATICALLY. INSTALL
CONDUIT WITH A MINIMUM OF BENDS IN THE SHORTEST
PRACTICAL DISTANCE CONSIDERING THE BUILDINGS
CONSTRUCTION AND OBSTRUCTIONS, EXCEPT WHERE
OTHERWISE NOTED.
STARTERS THAT ARE NOT PROVIDED BY OTHER DIVISIONS,
SHALL BE PROVIDED BY DIVISION 26, UNLESS SPECIFICALLY
NOTED OTHERWISE.
AND PARTITIONS SHALL BE SEALED WITH UL APPROVED
FIRE SEALANT MATERIAL TO MAINTAIN THE RATING
OF THE SEPARATION.
MANUFACTURER, TYPE OR CATALOG NUMBER, SUCH
DESIGNATIONS ARE TO ESTABLISH STANDARDS OR
DESIRED QUALITY. ACCEPTANCE OR REJECTION OF
THE PROPOSED SUBSTITUTIONS SHALL BE SUBJECT
TO THE APPROVAL OF THE ENGINEER.
REFER TO ARCHITECTURAL DRAWINGS FOR EXACT
LOCATION OF EQUIPMENT, DEVICES, AND FURNITURE
REQUIREMENTS, PRIOR TO ROUGHING IN FOR SAME.
ALL GENERAL NOTES, SYMBOLS, LISTS, ABBREVIATIONS
AND DETAILS ARE TO BE CONSIDERED APPLICABLE TO
ALL ELECTRICAL DRAWINGS FOR THIS PROJECT.
IN AREAS AFFECTED BY THIS RENOVATION AND
ADJACENT AREAS THE CONTRACTOR SHALL MAINTAIN
CONTINUITY OF EXISTING ELECTRICAL SERVICE.
PRIOR TO REMOVAL OF EQUIPMENT, THE OWNER WILL
INDICATE WHICH EXISTING DEVICES OR MATERIALS
SHALL BE SALVAGED AND TURNED OVER FOR STORAGE.
WHERE EXISTING EQUIPMENT AND DEVICES ARE TO BE
RELOCATED, ALL ASSOCIATED WIRING, CONDUIT AND
ACCESSORIES SHALL BE EXTENDED, RELOCATED OR
REPLACED WHERE REQUIRED.
CONDITIONS TO BE ENCOUNTERED IN THE PERFORMANCE
OF THIS WORK. THE CONTRACTOR SHALL
COORDINATE THIS WORK WITH THE GENERAL CONTRACTOR
DURING CONSTRUCTION. FAILURE TO DO SO WILL NOT
RELIEVE THE CONTRACTOR OF THE
RESPONSIBILITY FOR FULL COMPLETION OF THE WORK
IN ACCORDANCE WITH APPLICABLE DRAWINGS AND
SPECIFICATIONS. VERIFY EXISTING SYSTEMS THAT WILL BE
UTILIZED FOR CONNECTION TO THE NEW SYSTEM. IF
DISCREPANCIES EXIST BETWEEN THE CONTRACT DRAWINGS
AND THE ACTUAL EXISTING CONDITIONS, THE
CONTRACTOR SHALL NOTIFY THE ENGINEER/OWNER
PRIOR TO PROCEEDING WITH THE INSTALLATION.
DOTTED INDICATES EXISTING EQUIPMENT
EXISTING
LAMPS, HANGERS, FITTINGS, ETC. FOR A COMPLETE AND PROPER INSTALLATION
ALL FIXTURES SHALL BE FURNISHED COMPLETE WITH ALL HARDWARE
LIGHTING FIXTURE SCHEDULE
LAMPS
28 277R C
ORIENTATE CENTER BASKETFLUXGRID SERIESDAY-BRITE
LED 28 INPUT WATTS.2BLT2-33LHE-ADSM-EZ1-LP835-*1LITHONIA LIGHTING
3300 LUMEN - 2x2 RECESSED "VOLUMETRIC" LED TROFFER WITH CENTER BASKET - ACT CEILING
48 120/277S D
4700 LUMEN - 8"x4' LED WRAP AROUND
48 INPUT WATTS.LAW4-35ML-EUCOLUMBIA LIGHTING
39 UNVR J
23 277W SLW
HARDWARE. PHOTOCELL ON/OFF
LED PROVIDE ALL NECESSARY MOUNTINGDSXW1 LED 20C 350 30K T3M MVOLT-DDBXDLITHONIA
LED WALL LUMINAIRE.
HARDWARE.
LED PROVIDE ALL NECESSARY MOUNTINGKAD LED 20C 530 30K R3 MVOLTLITHONIA
LED POLE LUMINAIRE DARK BRONZE WITH 10 FOOT SQUARE STRAIGHT STEEL DARK BRONZE POLE.
R J
HARDWARE.
LED PROVIDE ALL NECESSARY MOUNTINGKAD LED 20C 530 30K R5 MVOLTLITHONIA
##
E L E C T R I C A L L E G E N D LP-1,3 HOMERUN TO PNLBRD - ARROWS INDICATE NUMBER OF CIRCUITS. CROSS LINES INDICATE NUMBER
OF CONDUCTORS OTHER THAN TWO (PROVIDE NUMBER OF WIRES REQUIRED TO ALLOW SWITCHING
SHOWN - E10 SERIES LIGHTING DRAWINGS).
CIRCUIT NUMBER(S)
PANEL DESIGNATION
WIRING IN RACEWAY CONCEALED UNDER FLOOR/UNDER GROUND
2'x2' RECESSED LIGHTING FIXTURE - SEE LIGHTING FIXTURE SCHEDULE
2'x4' RECESSED LIGHTING FIXTURE - SEE LIGHTING FIXTURE SCHEDULE
RECESSED DOWNLIGHT - SEE LIGHTING FIXTURE SCHEDULE
PENDANT LIGHTING FIXTURE - SEE LIGHTING FIXTURE SCHEDULE
POLE MOUNTED AREA LIGHT - SEE LIGHTING FIXTURE SCHEDULEPOLE MOUNTED AREA LIGHT - SEE LIGHTING FIXTURE SCHEDULE
SINGLE POLE SWITCH - MOUNT C/L UP 48" UNLESS NOTED OTHERWISE
THREE-WAY SWITCH - MOUNT C/L UP 48" UNLESS NOTED OTHERWISE
FOUR-WAY SWITCH - MOUNT C/L UP 48" UNLESS NOTED OTHERWISE
0-10V DIMMER SWITCH - MOUNT C/L UP 48" UNLESS NOTED OTHERWISE
OC OCCUPANCY SENSOR AND POWER PACK - PROVIDE NUMBER OF POWER PACKS REQUIRED TO ALLOW
FOR NUMBER OF OCCUPANCY SENSORS AND SWITCHING SHOWN - DASHED LINE INDICATES GROUPING
OF SENSORS - SEE DETAIL ON E70 SERIES DRAWING
SUBLETTER INDICATES SWITCH CONTROL
A LETTER ADJACENT TO SYMBOL INDICATES SPECIAL MOUNTING DESIGNATION - SEE ITEM
DESCRIPTIONS BELOW
TAMPER RESISTANT DUPLEX CONVENIENCE RECEPTACLE - MOUNT C/L UP 24" UNLESS NOTED
OTHERWISE ON PLANS OR IN CLASSROOM RECEPTACLE MOUNTING HEIGHT TABLE BELOW - "A"
INDICATES MOUNT C/L UP 6" ABOVE COUNTER BACKSPLASH / C/L 48" WHERE NOT LOCATED AT A
COUNTER
TAMPER RESISTANT DOUBLE DUPLEX CONVENIENCE RECEPTACLE - MOUNT C/L UP 24" UNLESS
NOTED OTHERWISE ON PLANS OR IN CLASSROOM RECEPTACLE MOUNTING HEIGHT TABLE BELOW -
"A" INDICATES MOUNT C/L UP 6" ABOVE COUNTER BACKSPLASH / C/L 48" WHERE NOT LOCATED
AT A COUNTER
TAMPER RESISTANT GFCI DUPLEX CONVENIENCE RECEPTACLE - MOUNT C/L UP 48" UNLESS NOTED
OTHERWISE ON PLANS OR IN CLASSROOM RECEPTACLE MOUNTING HEIGHT TABLE BELOW - "A"
INDICATES MOUNT C/L UP 6" ABOVE COUNTER BACKSPLASH
SPECIAL RECEPTACLE - COORDINATE NEMA CONFIGURATION AND MOUNTING WITH FURNISHED
EQUIPMENT UNLESS NOTED
SINGLE GANG FLOOR BOX WITH DUPLEX DATA RECEPTACLE
FLUSH FLOOR REACH-IN DEVICE BOX-SEE DETAIL ON E70 SERIES DRAWING
DATA OUTLET LOCATION - JACK/S, FACEPLATE, WIRING, JUNCTION BOX WITH SINGLE GANG
RAISED RING AND TWO 1" CONDUIT TO ABOVE AN ACCESSIBLE CEILING - MOUNT UP SAME AS
ASSOCIATED RECEPTACLE UNLESS NOTED OTHERWISE
W DATA OUTLET LOCATION - JACK/S, FACEPLATE, WIRING, JUNCTION BOX WITH SINGLE GANG
RAISED RING AND ONE 1" CONDUIT TO ABOVE AN ACCESSIBLE CEILING - "W" INDICATES
PROVISIONS FOR WALL PHONE - MOUNT C/L UP 48" UNLESS NOTED OTHERWISE
DATA OUTLET LOCATION - JACK/S, FACEPLATE, WIRING, JUNCTION BOX WITH SINGLE GANG
RAISED RING AND TWO 1" CONDUIT TO ABOVE AN ACCESSIBLE CEILING - MOUNT UP SAME AS
ASSOCIATED RECEPTACLE UNLESS NOTED OTHERWISE
PROVISION FOR AUDIO VISUAL OUTLET/S - DEEP JUNCTION BOX WITH DOUBLE GANG RAISED RING
(UNLESS NOTED OTHERWISE) AND TWO 1 1/4" CONDUIT TO ABOVE AN ACCESSIBLE CEILING -
MOUNT UP SAME AS ASSOCIATED RECEPTACLE UNLESS NOTED OTHERWISE. SEE DETAILS ON
DRAWING E70.2
PROVISIONS FOR CCTV CAMERA - JUNCTION BOX WITH SINGLE GANG RAISED RING AND ONE 1"
CONDUIT TO ABOVE AN ACCESSIBLE CORRIDOR CEILING - MOUNTING HEIGHT AS INDICATED - SEE
ARCHITECTURAL EXTERIOR ELEVATIONS FOR MOUNTING HEIGHTS FOR ALL EXTERIOR LOCATIONS
CR PROVISIONS FOR ACCESS CONTROL CARD READER - SEE PROVISIONS FOR ACCESS CONTROL DETAIL
ON 70 SERIES DRAWING
DC PROVISIONS FOR ACCESS CONTROL MAGNETIC DOOR SWITCH - SEE PROVISIONS FOR ACCESS
CONTROL DETAIL ON E70 SERIES DRAWINGCONTROL DETAIL ON E70 SERIES DRAWING
J JUNCTION BOX
FUSED DISCONNECT SWITCH
VARIABLE FREQUENCY DRIVE FURNISHED BY DIVISION 23 AND INSTALLED AND WIRED BY
DIVISION 26 - COORDINATE EXACT LOCATION WITH DIVISION 23
ELECTRICAL MOTOR
PANELBOARD - 120/208V
PANELBOARD - 277/480V
F FIRE ALARM MANUAL PULL STATION - MOUNT C/L UP 48"
FIRE ALARM HORN / LIGHT UNIT - CANDLE POWER (CD) PER NFPA 72 AND AS NOTED - 15/75
WHERE NOT OTHERWISE INDICATED ON PLANS - MOUNT C/L UP 94" ON WALL
FIRE ALARM STROBE LIGHT UNIT - CANDLE POWER (CD) PER NFPA 72 AND AS NOTED - 15/75
WHERE NOT OTHERWISE INDICATED ON PLANS - MOUNT C/L UP 94" ON WALL
FIRE ALARM SYSTEM DUCT SMOKE DETECTOR WITH SAMPLING TUBE
FIRE ALARM COMBINATION SMOKE/CARBON MONOXIDE (CO) DETECTOR - CEILING MOUNTED -
COORDINATE EXACT LOCATION WITH MECHANICAL DIFFUSERS AND GRILLES - DO NOT LOCATE
WITHIN 5 FEET OF A MECHANICAL DIFFUSER OR GRILLE
HD FIRE ALARM HEAT DETECTOR - CEILING MOUNTED
AIM FIRE ALARM ADDRESSABLE INPUT MODULE
AOM FIRE ALARM ADDRESSIBLE OUTPUT MODULE
TS FIRE ALARM TAMPER SWITCH
FS FIRE ALARM FLOW SWITCH
DH ELECTRIC DOOR HOLDER / CLOSER - COORDINATE WITH DIVISION 08
EXIT SIGN WITH ARROWS AS INDICATED OR HATCH INDICATES FACE - CEILING MOUNTED - SEE
DETAIL ON E70 SERIES DRAWING FOR WIRING REQUIREMENTS
EXIT SIGN WITH ARROWS AS INDICATED OR HATCH INDICATES FACE - WALL MOUNTED C/L UP 18"
ABOVE DOOR - SEE DETAIL ON E70 SERIES DRAWING FOR WIRING REQUIREMENTS
CEILING MOUNTED EDGE LIT EXIT SIGN
EMERGENCY BATTERY UNIT - SEE DETAIL ON E70 SERIES DRAWING FOR WIRING REQUIREMENTS
EMERGENCY BATTERY UNIT CEILING MOUNTED - SEE DETAIL ON E70 SERIES DRAWING FOR WIRING
REQUIREMENTS
D P
L F
L P
L -1
-H 1
L P
L -1
-H 2B
A T
T B
A T
T DPHD
HC DOOR OPERATOR SHALL BE RELOCATED WITH ASSOCIATED
D10
VERIFY THAT ELECTRICAL POWER, LIGHTING
AND SYSTEMS ARE NOT AFFECTED BY THE
ALTERATIONS. PROVIDE ALL WORK AS
REQUIRED TO MAINTAIN POWER AND PROPER
OPERATION OF SYSTEMS.
EQUIPMENT TO BE REMOVED.
AND ALL ASSOCIATED WIRING BACK TO
PANELBOARD. COORDINATE WITH ALL TRADES
AND OWNER BEFORE DISCONNECTIONS ARE
MADE.
D10...
AND REWIRED AS INDICATED ON DRAWINGS OR
SHOWN.
D01
PNL
ELEV.
IDF
AREA.
VERIFY THAT ELECTRICAL POWER, LIGHTING
AND SYSTEMS ARE NOT AFFECTED BY THE
ALTERATIONS. PROVIDE ALL WORK AS
REQUIRED TO MAINTAIN POWER AND PROPER
OPERATION OF SYSTEMS.
WITH MECHANICAL PIPING, DUCT WORK AND
EQUIPMENT.
L04...
7"-6". WIRE LIGHTING AND INVERTER TO
ALLOW ON/OFF CONTROL OF LIGHTING
FIXTURES (SEE KEYNOTE L05) AND
FORCE LIGHTING ON LOSS OF NORMAL
UNSWITCHED POWER. PROVIDE LABEL:
POWER FIXTURE UPON LOSS OF POWER (FIXTURES
SHALL BE ALLOWED TO BE SWITCHED).
L09...
WIRING SHALL BE CONCEALED. WIRE FIXTURE
VIA PHOTOCELL AND INVERTER.
SEE E10-2 FOR CONTINUATION
OWNERS FUTURE DATA CABLING.
FF
FOR DATA/AV
COOLER.
P35...
CEILING MOUNTED PROJECTOR. COORDINATE
P41...
FURNISHED BY OWNER'S AV VENDOR AND INSTALLED
UNDER DIVISION 26. DIVISION 26 SHALL PROVIDE
ONE 1" CONDUIT FROM BACKBOX TO SOUND SYSTEM
RACK IN STORAGE ROOM.
PANEL. COORDINATE WITH DIVISION 22.
AT ALL PENETRATIONS.
PROVIDE FIRE STOPPING
TYPE AND SIZE OF WIRING PER
MANUFACTURERS REQUIREMENTS.
TYPE AND SIZE OF WIRING PER
MANUFACTURERS REQUIREMENTS.
1 FIRST FLOOR PART PLAN - AREA A SCALE: 1/8" = 1'-0"
03-26-2020 ADDENDUM #4
IDF ROOM 210 FOR DATA PATH. CORE DRILL
RUN 4" CONDUIT IN CHASE TO SECOND FLOOR
F
WIRE BASKET CABLE TRAY,
LPL1H2-40
PP1-13
RELOCATED
RELOCATED
COOLER.
P35...
CEILING MOUNTED PROJECTOR. COORDINATE
P41...
FURNISHED BY OWNER'S AV VENDOR AND INSTALLED
UNDER DIVISION 26. DIVISION 26 SHALL PROVIDE
ONE 1" CONDUIT FROM BACKBOX TO SOUND SYSTEM
RACK IN STORAGE ROOM.
PANEL. COORDINATE WITH DIVISION 22.
LPL1H1-31
LPL1H1-33
1 FIRST FLOOR PART PLAN - AREA B SCALE: 1/8" = 1'-0"
03-26-2020 ADDENDUM #4
W P
G F
P1-2
P1-2
P1-2
P1-2
P1-2
RTU-1
RTU-2
RTU-3
RTU-4
RTU-5
ENCLOSURE. LOCATE ADJACENT TO ROOF
MOUNTED HVAC EQUIPMENT.
OUTPUT MODULE TO SHUTDOWN AHU FAN.
WITH FIELD CONDITIONS
Drawing Scales
PA / PE:
WATTS
TUB 1 OF 1 - REMARKS:
EX CIRCUIT 20 1 1 1 0 0 --- --- 0 2 2 1 20 EX CIRCUIT
EX CIRCUIT 20 1 3 3 0 --- 0 --- 0 4 4 1 20 EX CIRCUIT
EX CIRCUIT 20 1 5 5 0 --- --- 0 0 6 6 1 20 EX CIRCUIT
EX CIRCUIT 20 1 7 7 0 0 --- --- 0 8 8 1 20 EX CIRCUIT
EX CIRCUIT 20 1 9 9 0 --- 0 --- 0 10 10 1 20 EX CIRCUIT
EX CIRCUIT 20 1 11 11 0 --- --- 0 0 12 12 1 20 EX CIRCUIT
EX CIRCUIT 20 1 13 13 0 0 --- --- 0 14 14 1 20 EX CIRCUIT
EX CIRCUIT 20 1 15 15 0 --- 0 --- 0 16 16 1 20 EX CIRCUIT
EX CIRCUIT 20 1 17 17 0 --- --- 0 0 18 18 1 20 EX CIRCUIT
EX CIRCUIT 20 1 19 19 0 0 --- --- 0 20 20 1 20 EX CIRCUIT
EX CIRCUIT 20 1 21 21 0 --- 0 --- 0 22 22 1 20 EX CIRCUIT
EX CIRCUIT 20 1 23 23 0 --- --- 0 0 24 24 1 20 EX CIRCUIT
EX CIRCUIT 20 1 25 25 0 0 --- --- 0 26 26 1 20 EX CIRCUIT
EX CIRCUIT 20 1 27 27 0 --- 0 --- 0 28 28 1 20 EX CIRCUIT
EX CIRCUIT 20 1 29 29 0 --- --- 0 0 30 30 1 20 EX CIRCUIT
* RCPT FILE STOR RM 20 1 31 31 1000 1000 --- --- 0 32 32 1 20 EX CIRCUIT
* RCPT FILE STOR RM 20 1 33 33 1000 --- 1000 --- 0 34 34 1 20 EX CIRCUIT
SPARE 20 1 35 35 0 --- --- 0 0 36 36 1 20 SPARE
SPARE 20 1 37 37 0 0 --- --- 0 38 38 1 20 EX CIRCUIT
EX CIRCUIT 20 1 39 39 0 --- 0 --- 0 40 40 1 20 EX CIRCUIT
EX CIRCUIT 20 1 41 41 0 --- --- 0 0 42 42 1 20 EX CIRCUIT
TOTAL AMPS: 5.6 1000 1000 0 TOTAL WATTS: 2000
REMARKS: EXISTING PANEL, PANEL FULL NAME LPL-1-H1. *=NEW CIRCUIT ON SPARE CIRCUIT BREAKER.
03/25/2020
WATTS
TUB 1 OF 1 - REMARKS:
EX CIRCUIT 20 1 1 1 0 0 --- --- 0 2 2 1 20 EX CIRCUIT
EX CIRCUIT 20 1 3 3 0 --- 0 --- 0 4 4 1 20 EX CIRCUIT
EX CIRCUIT 20 1 5 5 0 --- --- 0 0 6 6 1 20 EX CIRCUIT
EX CIRCUIT 20 1 7 7 0 0 --- --- 0 8 8 1 20 EX SPARE
* LTG FINANCIAL AID 20 1 9 9 616 --- 616 --- 0 10 10 1 20 EX SPARE
* LTG REGISTRAR 20 1 11 11 784 --- --- 784 0 12 12 1 20 EX SPARE
EX SPARE 20 1 13 13 0 0 --- --- 0 14 14 1 20 EX SPARE
EX CIRCUIT 20 1 15 15 0 --- 0 --- 0 16 16 1 20 EX CIRCUIT
EX CIRCUIT 20 1 17 17 0 --- --- 0 0 18 18 1 20 EX CIRCUIT
EX CIRCUIT 20 1 19 19 0 0 --- --- 0 20 20 1 20 EX CIRCUIT
EX SPARE 20 1 21 21 0 --- 0 --- 0 22 22 1 20 EX SPARE
EX SPARE 20 1 23 23 0 --- --- 0 0 24 24 1 20 EX SPARE
EX SPARE 20 1 25 25 0 0 --- --- 0 26 26 1 20 EX SPARE
EX SPARE 20 1 27 27 0 --- 0 --- 0 28 - 1 SPACE
SPACE 1 - 29 0 --- --- 0 0 30 - 1 SPACE
SPACE 1 - 31 0 0 --- --- 0 32 - 1 SPACE
SPACE 1 - 33 0 --- 0 --- 0 34 - 1 SPACE
SPACE 1 - 35 0 --- --- 0 0 36 - 1 SPACE
EX CIRCUIT 15 3 37 37 0 0 --- --- 0 38 38 3 15 EX CIRCUIT
- - - 39 --- 0 --- 40 - - -
- - - 41 --- --- 0 42 - - -
TOTAL AMPS: 1.7 0 616 784 TOTAL WATTS: 1400
REMARKS: EXISTING PANEL, PANEL FULL NAME LPL-1-G. * = EX SPARE CB NEW CIRCUIT.
03/25/2020
WATTS
TUB 1 OF 1 - REMARKS:
EX UPS SERVER ROOM 100 3 1 1 0 0 --- --- 0 2 - 1 SPACE
- - - 3 --- 0 --- 0 4 - 1 SPACE
- - - 5 --- --- 0 0 6 - 1 SPACE
SPACE 1 - 7 0 0 --- --- 0 8 - 1 SPACE
SPACE 1 - 9 0 --- 0 --- 0 10 - 1 SPACE
SPACE 1 - 11 0 --- --- 0 0 12 - 1 SPACE
* PANEL P1 100 3 13 13 0 0 --- --- 0 14 - 1 SPACE
- - - 15 --- 0 --- 0 16 - 1 SPACE
- - - 17 --- --- 0 0 18 - 1 SPACE
EX LPL-1-H1 & H2 100 3 19 19 0 0 --- --- 0 20 20 3 100 EX LPL-1-15
- - - 21 --- 0 --- 22 - - -
- - - 23 --- --- 0 24 - - -
EX LPL-J1 LPL-J2 150 3 25 25 0 0 --- --- 0 26 SPACE USED BY 150A CB
- - - 27 --- 0 --- 28 - - -
- - - 29 --- --- 0 30 - - -
- - - 31 0 --- --- 32 - - -
- - - 33 --- 0 --- 34 - - -
- - - 35 --- --- 0 36 - - -
- - - 37 0 --- --- 38 - - -
- - - 39 --- 0 --- 40 - - -
- - - 41 --- --- 0 42 - - -
REMARKS: EXISTING PANELBOARD, * = EX SPARE CB, NEW CIRCUIT
03/25/2020
WATTS
TUB 1 OF 1 - REMARKS:
RCPT OFFICE 180C 20 1 1 1 1260 2160 --- --- 900 2 2 1 20 RCPT ROOF TOP
RCPT OFFICE 180A, B 20 1 3 3 1800 --- 3244 --- 1444 4 4 1 20 BOILER B-1 & CP1
RCPT OPEN OFFICE 180 20 1 5 5 1440 --- --- 2884 1444 6 6 1 20 BOILER B-2 & CP2
RCPT OPEN OFFICE 180 20 1 7 7 1800 2340 --- --- 540 8 8 1 20 RCPT UTILITY RM
RCPT OPEN OFFICE 180 FLR BOX 20 1 9 9 180 --- 360 --- 180 10 10 1 20 RCPT STORAGE
RCPT CONF RM 174 20 1 11 11 720 --- --- 1080 360 12 12 1 20 RCPT AV RACK
RCPT WAITING 170 20 1 13 13 360 1056 --- --- 696 14 14 1 20 PROJECTOR SCREEN
RCPT EIS OFFICE 173 20 1 15 15 900 --- 1596 --- 696 16 16 1 20 PROJECTOR SCREEN
RCPT EIS 172 20 1 17 17 1440 --- --- 2440 1000 18 18 1 20 RCPT CEILING PROJECTOR
RCPT EIS 172 20 1 19 19 720 1720 --- --- 1000 20 20 1 20 RCPT CEILING PROJECTOR
RCPT RECEPTION 171 FLR BOX 20 1 21 21 180 --- 360 --- 180 22 22 1 20 RCPT EXTERIOR
RCPT RECEPT/HUB 20 1 23 23 360 --- --- 860 500 24 24 1 20 SHADE CONTROLLER
RCPT RECEPT/HUB 20 1 25 25 180 360 --- --- 180 26 26 1 20 RCPT EIS COUNTER
RCPT RECEPT/HUB 20 1 27 27 360 --- 720 --- 360 28 28 1 20 RCPT EIS COUNTER
RCPT FUNCTION RM A WALL 20 1 29 29 1440 --- --- 1800 360 30 30 1 20 RCPT ADMISSIONS COUNTER
RCPT FUNCTION RM A WALL 20 1 31 31 1080 2080 --- --- 1000 32 32 1 20 RCPT ADMISSIONS PRT
RCPT FUNCTION RM A FLR BOX 20 1 33 33 1720 --- 1720 --- 0 34 34 1 20 SPARE
RCPT FUNCTION RM B WALL 20 1 35 35 1620 --- --- 1620 0 36 36 1 20 SPARE
RCPT FUNCTION RM B EQUIP. 20 1 37 37 720 720 --- --- 0 38 38 1 20 SPARE
RCPT FUNCTION RM B EQUIP. 20 1 39 39 720 --- 720 --- 0 40 40 1 20 SPARE
RCPT FUNCTION RM B FLR BOX 20 1 41 41 720 --- --- 720 0 42 42 1 20 SPARE
TOTAL AMPS: 84.9 10436 8720 11404 TOTAL WATTS: 30560
REMARKS: NEW PANELBOARD
WATTS
TUB 1 OF 1 - REMARKS:
LTG HUB 20 1 1 1 288 8366 --- --- 24233 2 2 3 40 RTU-1
LTG PRESENTATION ROOM 20 1 3 3 1537 --- 9615 --- 4 - - -
LTG ADMIN 20 1 5 5 1703 --- --- 9781 6 - - -
LTG EXTERIOR 20 1 7 7 138 2487 --- --- 7046 8 8 3 15 RTU-2
LTG UTILITY SPACES 20 1 9 9 336 --- 2685 --- 10 - - -
SPARE 20 1 11 11 0 --- --- 2349 12 - - -
SPARE 20 1 13 13 0 2771 --- --- 8313 14 14 3 15 RTU-3
SPARE 20 1 15 15 0 --- 2771 --- 16 - - -
SPARE 20 1 17 17 0 --- --- 2771 18 - - -
SPARE 20 1 19 19 0 2349 --- --- 7046 20 20 3 15 RTU-4
SPARE 20 1 21 21 0 --- 2349 --- 22 - - -
SPARE 20 1 23 23 0 --- --- 2349 24 - - -
SPACE 1 - 25 0 8078 --- --- 24233 26 26 3 40 RTU-5
SPACE 1 - 27 0 --- 8078 --- 28 - - -
SPACE 1 - 29 0 --- --- 8078 30 - - -
SPACE 1 - 31 0 942 --- --- 2826 32 32 3 15 PUMP P-1
SPACE 1 - 33 0 --- 942 --- 34 - - -
SPACE 1 - 35 0 --- --- 942 36 - - -
SPACE 1 - 37 0 942 --- --- 2826 38 38 3 15 PUMP P-2
SPACE 1 - 39 0 --- 942 --- 40 - - -
SPACE 1 - 41 0 --- --- 942 42 - - -
TOTAL AMPS: 96.9 25933 27380 27212 TOTAL WATTS: 80525
REMARKS: NEW PANELBOARD
WATTS
TUB 1 OF 1 - REMARKS: EXISTING SIEMENS PANEL TYPE P2
TRANSFORMER DT2 175 3 1 1 0 0 --- --- 0 2 SPACE USED BY 175A/CB
- - - 3 --- 0 --- 4 - - -
- - - 5 --- --- 0 6 - - -
SPACE 1 - 7 0 0 --- --- 0 8 - 1 SPACE
SPACE 1 - 9 0 --- 0 --- 0 10 - 1 SPACE
SPACE 1 - 11 0 --- --- 0 0 12 - 1 SPACE
* PANEL H1 125 3 13 13 0 0 --- --- 0 14 - 1 SPACE
- - - 15 --- 0 --- 0 16 - 1 SPACE
- - - 17 --- --- 0 0 18 - 1 SPACE
PANEL M1 MECH ROOM 125 3 19 19 0 0 --- --- 0 20 20 3 100 LTG PNL LPH-1-G
- - - 21 --- 0 --- 22 - - -
- - - 23 --- --- 0 24 - - -
SPARE 100 3 25 25 0 0 --- --- 0 26 26 3 100 SPARE
- - - 27 --- 0 --- 28 - - -
- - - 29 --- --- 0 30 - - -
- - - 37 0 --- --- 38 - - -
- - - 39 --- 0 --- 40 - - -
- - - 41 --- --- 0 42 - - -
REMARKS: EXISTING PANELBOARD. * NEW CIRCUIT BREAKER AND CIRCUIT
03/25/2020
WATTS
TUB 1 OF 1 - REMARKS:
*1 RCPT DIR 137A 20 1 1 1 1080 2160 --- --- 1080 2 2 1 20 *1 RCPT DATA MANAGEMENT
*1 RCPT OFFICES 137B & C 20 1 3 3 1800 --- 2880 --- 1080 4 4 1 20 *1 RCPT OFFICE
EX CIRCUIT 20 1 5 5 0 --- --- 1260 1260 6 6 1 20 *1 RCPT OFFICE
EX CIRCUIT 20 1 7 7 0 0 --- --- 0 8 8 1 20 EX CIRCUIT
EX CIRCUIT 20 1 9 9 0 --- 0 --- 0 10 10 1 20 EX CIRCUIT
EX CIRCUIT 20 1 11 11 0 --- --- 0 0 12 12 1 20 EX CIRCUIT
EX CIRCUIT 20 1 13 13 0 0 --- --- 0 14 14 1 20 EX CIRCUIT
EX CIRCUIT 20 1 15 15 0 --- 0 --- 0 16 16 1 20 EX CIRCUIT
EX CIRCUIT 20 1 17 17 0 --- --- 0 0 18 18 1 20 EX CIRCUIT
EX CIRCUIT 20 1 19 19 0 0 --- --- 0 20 20 1 20 EX CIRCUIT
EX CIRCUIT 20 1 21 21 0 --- 0 --- 0 22 22 1 20 EX CIRCUIT
EX CIRCUIT 20 1 23 23 0 --- --- 0 0 24 24 1 20 EX CIRCUIT
RCPT COPY AREA COUNTER 20 1 25 25 180 180 --- --- 0 26 26 1 20 EX CIRCUIT
RCPT COPY AREA 20 1 27 27 1000 --- 1000 --- 0 28 28 1 20 EX CIRCUIT
EX CIRCUIT 20 1 29 29 0 --- --- 1080 1080 30 30 1 20 * RCPT FINANCIAL. AID WORK AREA
EX CIRCUIT 20 1 31 31 0 1080 --- --- 1080 32 32 1 20 * RCPT FINANCIAL. AID WORK AREA
* RCPT OFFICE 138C&138 20 1 33 33 540 --- 1080 --- 540 34 34 1 20 * RCPT FINANCIAL. AID WORK AREA
* RCPT DISPLAY 20 1 35 35 540 --- --- 1260 720 36 36 1 20 * RCPT REG OPEN AREA
* RCPT WATER COOLER 20 1 37 37 540 1080 --- --- 540 38 38 1 20 * RCPT REG OPEN AREA
* RCPT UTILITY139 20 1 39 39 180 --- 720 --- 540 40 40 1 20 * RCPT MAC LAB
* RCPT FINANCIAL. AID WORK AREA 20 1 41 41 180 --- --- 1180 1000 42 42 1 20 * RCPT FINANCIAL AID PRT
TOTAL AMPS: 41.6 4500 5680 4780 TOTAL WATTS: 14960
REMARKS: EXISTING PANEL, PANEL FULL NAME LPL-1-H2. *=NEW CIRCUIT BREAKER, CIRCUIT 37-GFCI CB. *1 CIRCUIT BREAKER REPURPOSED.
03/25/2020
WATTS
TUB 1 OF 1 - REMARKS:
RCPT IT (WALL RACEWAY) 20 1 1 1 720 720 --- --- 0 2 2 1 20 SPARE
RCPT IT (WALL RACEWAY) 20 1 3 3 720 --- 720 --- 0 4 4 1 20 SPARE
RCPT IT (WALL RACEWAY) 20 1 5 5 720 --- --- 720 0 6 6 1 20 SPARE
RCPT IT (WALL RACEWAY) 20 1 7 7 720 720 --- --- 0 8 8 1 20 SPARE
RCPT IT (WALL RACEWAY) 20 1 9 9 720 --- 720 --- 0 10 10 1 20 SPARE
RCPT BOOK STORE OFFICES 20 1 11 11 0 --- --- 0 0 12 12 1 20 SPARE
RCPT LOBBY 20 1 13 13 360 360 --- --- 0 14 14 1 20 SPARE
SPARE 20 1 15 15 0 --- 0 --- 0 16 16 1 20 SPARE
SPARE 20 1 17 17 0 --- --- 0 0 18 18 1 20 SPARE
SPARE 20 1 19 19 0 0 --- --- 0 20 20 1 20 SPARE
SPARE 20 1 21 21 0 --- 0 --- 0 22 22 1 20 SPARE
SPARE 20 1 23 23 0 --- --- 0 0 24 24 1 20 SPARE
SPARE 20 1 25 25 0 0 --- --- 0 26 26 1 20 SPARE
SPARE 20 1 27 27 0 --- 0 --- 0 28 28 1 20 SPARE
SPARE 20 1 29 29 0 --- --- 0 0 30 30 1 20 SPARE
- - - 31 0 --- --- 32 - - -
- - - 33 --- 0 --- 34 - - -
- - - 35 --- --- 0 36 - - -
- - - 37 0 --- --- 38 - - -
- - - 39 --- 0 --- 40 - - -
- - - 41 --- --- 0 42 - - -
REMARKS: NEW PANELBOARD
WATTS
TUB 1 OF 1 - REMARKS:
EX LPL-1-B, LPL-2-C 150 3 1 1 0 0 --- --- 0 2 - 1 SPACE
- - - 3 --- 0 --- 0 4 - 1 SPACE
- - - 5 --- --- 0 0 6 - 1 SPACE
SPACE USED BY 150A CB 1 - 7 0 0 --- --- 0 8 - 1 SPACE
SPACE USED BY 150A CB 1 9 9 0 --- 0 --- 0 10 - 1 SPACE
SPACE USED BY 150A CB 1 11 11 0 --- --- 0 0 12 - 1 SPACE
EX LPL-B-E 100 3 13 13 0 0 --- --- 0 14 14 3 100 EX LPL-1-K
- - - 15 --- 0 --- 16 - - -
- - - 17 --- --- 0 18 - - -
EX LPL-B-BR 100 3 19 19 0 0 --- --- 0 20 20 3 100 * PP1
- - - 21 --- 0 --- 22 - - -
- - - 23 --- --- 0 24 - - -
SPACE 1 - 25 0 0 --- --- 0 26 - 1 SPACE
SPACE 1 - 27 0 --- 0 --- 0 28 - 1 SPACE
SPACE 1 - 29 0 --- --- 0 0 30 - 1 SPACE
SPACE 1 - 31 0 0 --- --- 0 32 - 1 SPACE
SPACE 1 - 33 0 --- 0 --- 0 34 - 1 SPACE
SPACE 1 - 35 0 --- --- 0 0 36 - 1 SPACE
SPACE 1 - 37 0 0 --- --- 0 38 - 1 SPACE
EX TEMP PWR 60 2 39 39 0 --- 0 --- 0 40 40 2 50 EX TEMP PWR
- - - 41 --- --- 0 42 - - -
REMARKS: EXISTING PANELBOARD SQUARE-D NQOD. * = NEW CIRCUIT BREAKER AND CIRCUIT.
03/25/2020
4. REFER TO E20 SERIES DRAWINGS FOR POWER SUPPLY LOCATION.
5. ALL CONDUITS SHALL BE CONCEALED. COORDINATE WITH DIVISION 08.
NOTES:
1. CONDUIT AND JUNCTION BOXES PROVIDED UNDER DIVISION 26. LOW VOLTAGE WIRING,
AND POWER SUPPLIES PROVIDED BY OWNERS CARD ACCESS CONTROLS VENDOR.
2. REFER TO ARCHITECTURAL FLOOR PLAN DRAWINGS (A10 SERIES) FOR DOOR NUMBERS
AND LOCATIONS.
3. COORDINATE WITH DIVISION 08 DOOR HARDWARE AND OWNER'S CARD ACCESS
CONTROL VENDOR.
Drawing Scales
PA / PE:
