An advanced facial detection system that works in conjunction with Biosite access control to safely and efficiently monitor operative temperature on site.

www.biositesystems.com

Facial detection and temperature measurement

WorkforceManagement

Workforce Management / Facial detection and temperature measurement

Effective temperature management on site

Features and benefits

To minimise the transmission of and exposure to infectious diseases on site, regular operative temperature monitoring is recommended. The facial detection system from Biosite is an efficient temperature measurement solution utilising innovative in-vivo detection technology that is 99.8% accurate.

The unit can be installed at entrance and exit points on site to monitor operative temperature

during throughput via forehead readings, meaning operatives can maintain wearing face masks. The system quickly and accurately calculates a temperature reading within 0.3℃ and in less than one second. Putting you in control of operative temperature management on site.

Infrared thermometer and face detection machine Works in conjunction with Biosite card reader or biometric access control system. Monocular in-vivo technology is safe and more efficient than alternative detection technology Delivers an accuracy rate of 99.8% Clearly displays operative temperature on screen Highly visible ‘please wear your mask’ reminder message

Industrial chip platform and system, using a high stability Hayes chip and mini version Linux systemLow power consumption (as low as 4W) Support for temperature interface protocol Multi-scene image exposure and correction algorithm

•

•

•

•••

•

•••

www.biositesystems.com

How does the solution work?

Additional information

Temperature measuring equipment should be used in rooms between room temperature -10℃ to 30℃

For accurate readings, the forehead should be left unobstructed (free of hair or clothing)

Outdoor temperatures can affect the accuracy of readings – if an operative enters from a cold outdoor environment, wait a minute for

their temperature to stabilise before taking a temperature test

Marks or coverage on the forehead area, including wrinkles, oil stains, water, sweat or heavy make-up can impact the accuracy of the temperature reading

Operative temperature and snapshot taken by

the Dual band IR Camera fixed on the turnstile

Proceed with fingerprint/card reader

Email including photo and temperature of

the operative sent to a designated email address

Temperature within normal range?

YES

YES

NO

NO

Normal entry requirement met?

Entry granted

Entry denied

www.biositesystems.com

T / 0121 374 2939E / info@biositesystems.com

Biosite Systems Ltd. Lancaster House, Drayton Road, Solihull, B90 4NG

Technical parameters

Conventional parameters

Temperature measurement module parameters

Operating system (OS) Embedded Linux

7” HD IPS Display

<0.5 second (30,000 base)

<0.5 second (30,000 base)

< 1m

DDR3 8GB

200W pixel ,120 degree wide angle lens, support wide dynamic, white night vision

99.8%

99.8%

0.5-0.8m

Maximum support 50,000

Maximum support 50,000

-10-30℃

5.5-14um

Standard 8 built-in GB,128 GB extended with TF card

Support for face detection

Face detection supports a minimum face pupil distance of 20 pixels

Face recognition supports a minimum face pupil distance of 20 pixels

±0.3℃

Support

Support

0.97±0.02

< 1s

Display screen

To

Network

Temp. measurement distance

Optimum distance

Indoor temp. measurement accuracy

Temp. measurement working environment

Effective emmissivity

Wavelength size

Corresponding time

Internal storage

Monocular camera

Face detection rate

Communication mode

Storage capacity

Installation characteristics

SC

Opening the door

Minimum pixel

Supply electricity

Black & White list function

Custom services

Technical data