Face Recognition Device F710

27
FACE RECOGNITION SYSTEM F710

description

Face recognition embedded solution which can be used for time attendance, access control and user verification.

Transcript of Face Recognition Device F710

Page 1: Face Recognition Device F710

FACE RECOGNITION SYSTEMF710

Page 2: Face Recognition Device F710

Presentation Overview

• Device Overview• Face Recognition Technology• Package Contents• Device Familiarization• Turning the Device ON• Administrator Registration• User Registration• User Verification• User Guide• Management Software• Device Performance• Specifications• Contact Us

Page 3: Face Recognition Device F710

Device Overview

Time Attendance

Access Control

User Identification

Page 4: Face Recognition Device F710

Time Attendance

Access Control

User Identification

The device can mark attendance time of users

The device can be connected to an electric door lock & configured in a manner that it opens only after a

successful user verification

The device can scan the face of a user and find his identity records

saved in its database.

Page 5: Face Recognition Device F710

Face Recognition Technology

• There are two technologies behind face recognition being used today- 2D & 3D technologies. 2D technology uses plane projection of actual faces & is affected by environment light, facial expression etc. 3D technology is more accurate but has the cons of being very expensive, complex algorithms, requiring more storage & slow recognition.

• The technology used in F710 is called ‘Dual Sensor’ which combines the advantages of both 2D & 3D technologies. It uses two special cameras which are just like a person’s eyes. The technology has fast recognition speed & high accuracy. Below given is the pictorial representation of ‘Dual Sensor’ technology.

Page 6: Face Recognition Device F710

Package ContentsProduct boxUser guide

Power adaptor Installation CD RFID card

F710 device

Page 7: Face Recognition Device F710

Device Familiarization – Front View

Touch keypad

IR lights

TFT color LCD

Cameras

Area for swiping

RFID card

Page 8: Face Recognition Device F710

Keypad

Backspace

Menu

Up selection

Down selection

EscapeEnter/OK

Page 9: Face Recognition Device F710

Back View

Doorconnection

terminal

SD card inserting

slot

Loud speaker

Page 10: Face Recognition Device F710

Back View

Power adaptor portNetwork cable port

Page 11: Face Recognition Device F710

Bottom View

USB port

Page 12: Face Recognition Device F710

Power Adaptor

To be connected to

the device

To be connected to

AC supply

Adaptor specifications.Input: 110-240V AC 1A 50-60HZ

Output: 12V 3A

Page 13: Face Recognition Device F710

RFID Card

The RFID card can be used for user verification

Page 14: Face Recognition Device F710

Management Software CD

The management software can be installed on a PC using the installation

CD provided

Page 15: Face Recognition Device F710

User Guide

The user guide contains all details regarding the system

Page 16: Face Recognition Device F710

Turning the device ON

Connect the power cable to the power adaptor port at the back

side of the device

Connect the other end of the power cable to AC supply

Now the device will turn ON automatically

Page 17: Face Recognition Device F710

Administrator Registration• The first step in the operation of the device is the administrator [admin]

registration. Only admin has the option to control the device & manage the records. Up to 5 admins can be registered in the device.

• To start with, after turning the device on, press MENU. Now the following prompt will appear.

Press 1 on the touchpad to set

admin

Press 1 to set the first

admin

Page 18: Face Recognition Device F710

• Now the device will start the admin registration process.• Make sure that the device is kept at a distance of 50-80 cm from the face

at the time of registration and verification.• Follow the instructions on the screen to complete the registration.• The system will ask ‘Register as User?’ Press OK if the admin is to be

registered as a user too. Press ESC if that is not required.• After successful registration, the confirmation message will be displayed

on the screen.• For admin verification, press MENU in stand by. A green circle and a

scanning brush will appear on the screen. Keep the face in such a manner that the brush can scan it properly, at the proper distance mentioned above. Once successfully verified, the Functions Menu will appear on the screen.

Page 19: Face Recognition Device F710

User Registration• Only admin can register, modify or delete users.• Press MENU for admin verification. After successful verification, Functions

Menu will appear. Now proceed in the following manner.

Press 2 to select user management

Press 1 to select register user

Input user number. It can be in the range

1-99999999

Page 20: Face Recognition Device F710

• After successful user registration, a confirmation message will be displayed on the screen.

Input user name. It can be up to 18 characters

long. Press ESC to toggle between small & capital

lettersSelect any one of the four

available verification options

Face: Normal userCard: Temporary userPin and Face & Card

and Face: High security level

Page 21: Face Recognition Device F710

User Verification

• The system automatically detects a face when it appears in front of the camera.

• Adjust the face so that a green square is seen blinking on the screen. This denotes that the system is attempting to verify the face. If it doesn’t appear, then adjust the face properly. You may be too far from or too near to the device.

• The device may show messages like ‘Adjust Your Actions’. This can happen if the face is not steady or facial expressions need to be adjusted.

• After successful user verification, voice prompt gives a voice message ‘access granted’.

• If a face is unknown to the system, it gives the message ‘access denied’ via the voice prompt.

Page 22: Face Recognition Device F710

User Guide

• The user guide provided along with the system, in printed & word document formats, give all details regarding device configuration, installation, admin/user management, system settings, record management etc.

Device Configuration

Front View Figure

Elevation View Figure

Back View Figure

TFT Color LCD

Display the function menu and user information.

Exit full screen view of this presentation, right click

here & select open document to view the user

guide

Page 23: Face Recognition Device F710

Management Software• A management software comes along with the system which can be

installed on a PC using the installation CD provided. It can be used for a variety of functions including staff management, device management, work shift settings, data import/export etc.

The default language of the software is Chinese. Follow these instructions to change it to English.

Open the software

Enter ‘admin’ in both fields

Find a white question mark, click on it to select English as default language

Page 24: Face Recognition Device F710

Device Performance

• The device is highly accurate & dependable. Still, keeping in mind the following points will aid in better device performance.

The system doesn’t have an inbuilt battery. So connect it to an uninterrupted power supply.

In cases of uneven light conditions [more light on one side of face] or low light conditions, the system responds correctly. But in no light conditions [total darkness, only IR light from the device is available] the system may reject a valid user at first but on multiple attempts, he will be recognized successfully.

At the time of user registration if a user wears spectacles and if he comes to the system without spectacles later, the system still

successfully recognizes him. But this doesn’t work with sun glasses.

Page 25: Face Recognition Device F710

In the system, data is stored in an SD card, which can be directly connected to PC via a card reader to export data

directly PC.

SD card

The system has the facility to connect with a USB storage device. Data including attendance logs, user list etc can be

imported from and exported to USB device in the form of .txt files.

Page 26: Face Recognition Device F710

Specifications

Page 27: Face Recognition Device F710

Contact Us

• BioEnable Technologies Pvt. Ltd.2nd Floor, The Avenue, Pune-Solapur Road, Hadapsar,landmark: Opp. Mega Center, Pune 411028 MH, India

• Toll free: 1800-209-2131 (only from India)• International Sales: +91-9326170554 or +91-9373336478• Others call : +91-20- 26810214• Fax: +91-20-30225587• email: [email protected] (Sales Worldwide)

[email protected] (Support Worldwide)[email protected] (Accounts Worldwide)