Facade claddings - Ruukki

Facade claddings

Accessories

2 Facade Claddings Accessories

• Content

Support studs ..........................................................3–9Support brackets .................................................... 10–12Adjustable fastener ................................................ 12–13Starting fillets ....................................................... 14–17Flashings .................................................................. 18

- Plinth flashings ..................................................... 18- Sill flashings ......................................................... 19- Vertical joint flashings ....................................... 20–25- External corner flashings ....................................25–31- Internal corner flashings .................................... 32–38- Cover flashings ................................................38–44- Eaves flashings ............................................... 44–46- Storm flashings ................................................46–47- Support flashings .............................................47–48- Reverse flashings ................................................. 48

Joint pieces .......................................................... 49–51Fastening screws ...................................................52–54Sealings ...................................................................55Other accessories .......................................................56

- Fastening socket ...................................................56- Gap template .......................................................56- Reparation paints .................................................. 57

This brochure includes the main accessories of facade claddings. They do not directly fit for use in all constructionsites. In conflict situations act according to the instructions of the structural designer or contact our technicalsupport (contact information on the last page of this brochure).

Facade Claddings Accessories 3

• Product propertiesProduct name Support stud CA1SS1Standard length 3000 mmSpecial range 150–4000 mmBlank width 170 mmWeight 1,6 kg/m (steel)Unit m

• Materials, coatings and colours1,2 mm Galvanized steel1,2 mm Colour coated steel1,5mm Colour coated aluminum

Colour chart

Coating Colour

Stee

l

Standard chart

HIARC RR20, 21, 23, 40, 41, 42, 43

HIARC Matt RR40, 41, 45

Colourful chart

HIARC & Powder paint

RR11, 22, 24, 26, 29, 30, 31, 32, 33, 34, 35, 36, 37, 44, 45, 750

Powder paint

RAL and NCS colours available on request

Colourful chart

PVDFRAL and NCS colours available on request

Alum

inum

Powder paint

RR, RAL and NCS colours available on request

Minimum order sizes:- Standard chart: No limitations- Colorful chart: Evaluated case by case

• Intended useSub-frame stud for facade claddings (excluding Cor-Ten claddings).

• Product propertiesProduct name Support stud CA1SS2Standard length 3000 mmSpecial range 150–4000 mmBlank width 250 mmWeight 2,4 kg/m (steel)Unit m


Colour chart

Coating Colour

Stee

l

Standard chart

HIARC RR20, 21, 23, 40, 41, 42, 43


Colourful chart


RR11, 22, 24, 26, 29, 30, 31, 32, 33, 34, 35, 36, 37, 44, 45, 750

Powder paint


Colourful chart


Alum

inum

Powder paint



• Intended useSub-frame stud for facade claddings (excluding Cor-Ten claddings).


• Product propertiesProduct name Support stud CA1RS1Standard length 3000 mmSpecial range 150–4000 mmBlank width 150 mmWeight 1,4 kg/m (steel)Unit m


Colour chart

Coating Colour

Stee

l

Standard chart

HIARC RR20, 21, 23, 40, 41, 42, 43


Colourful chart


RR11, 22, 24, 26, 29, 30, 31, 32, 33, 34, 35, 36, 37, 44, 45, 750

Powder paint


Colourful chart


Alum

inum

Powder paint



• Intended useSub-frame stud for facade claddings (excluding Cor-Ten claddings). next to windows and doors.

• Product propertiesProduct name Support stud corner CA1SSC1Standard length 3000 mmSpecial range 150–4000 mmBlank width 250 mmWeight 2,4 kg/Unit m


Colour chart

Coating Colour

Stee

l

Standard chart

HIARC RR20, 21, 23, 40, 41, 42, 43


Colourful chart


RR11, 22, 24, 26, 29, 30, 31, 32, 33, 34, 35, 36, 37, 44, 45, 750

Powder paint


Colourful chart


Alum

inum

Powder paint



• Intended useSub-frame stud for facade claddings (excluding Cor-Ten claddings), external corners.


• Product propertiesProduct name Support stud CA1SS3Standard length 3000 mmSpecial range 150–4000 mmBlank width 189 mmWeight 2,2 kg/mUnit m

• Materials, coatings and colours

1,5 mm steel Cor-Ten A

Minimum order sizes:- No limitations

• Intended useSub-frame stud for Liberta Cor-Ten products.

• Product propertiesProduct name Support stud CA1SS4Standard length 3000 mmSpecial range 150–4000 mmBlank width 192 mmWeight 2,3 kg/pcsUnit m



Minimum order sizes:-no limitations

• Intended useSub-frame stud for Cor-Ten facade claddings.


• Product propertiesProduct name Support stud corner CA1SSC2Standard length 3000 mmSpecial range 150–4000 mmBlank width 396 mmWeight 2,3 kg/mUnit m




• Intended useSub-frame stud for Cor-Ten facade claddings, external corners.

• Product propertiesProduct name Support stud corner CA1SSC3Standard length 3000 mmSpecial range 150–4000 mmBlank width 280 mmWeight 3,3 kg/mUnit m




• Intended useSub-frame stud for Cor-Ten facade claddings, external corners.


• Product propertiesProduct name Support stud CA1RS2Standard length 3000 mmSpecial range 150–4000 mmBlank width 156 mmWeight 1,8 kg/mUnit m




• Intended useSub-frame stud for Cor-Ten facade claddings, next to windows and doors.

• Product propertiesProduct name Support stud CA1SSC4Standard length 3000 mmSpecial range 150–4000 mmBlank width 312 mmWeight 3,7 kg/mUnit m




• Intended useSub-frame stud for Cor-Ten facade claddings, internal corners.

71 35

ø3.3c/c200

5x10 FLANGE HOLES

71 35

ø3.3k200


• Product propertiesProduct name Support stud CA1SS-AStandard length 3000 mmSpecial range 150–4000 mmBlank width 205 mmWeight 1,9 kg/mUnit m

• Materials, coatings and colours1,2 mm Colour coated steel

Standard:HIARC Matt RR45

Minimum order sizes:- Standard chart: No limitations

• Intended useSub-frame stud for Liberta Solar panels, used at vertical joints.

• NoteStud has pre-punched holes as follows:- c/c 200 for fasteners- c/c 630 for cable ties- c/c 660 for cables

• Product propertiesProduct name Support stud CA1SS-BStandard length 3000 mmSpecial range 150–4000 mmBlank width 205 mmWeight 1,9 kg/mUnit m

• Materials, coatings and colours1,2 mm Galvanized steel

• Intended useSub-frame stud for Liberta Solar panels, used at the middle of panels.

• NoteStud has pre-punched holes as follows:- c/c 200 for fasteners- c/c 630 for cable ties- c/c 660 for cables

71 35

ø3.3k200

111

70

25


• Product propertiesProduct name Support stud CA1SS -edgeStandard length 3000 mmSpecial range 150–4000 mmBlank width 183 mmWeight 1,7 kg/mUnit m

• Materials, coatings and colours1,2 mm Steel

Standard:HIARC Matt RR45


• Intended useSub-frame stud for Liberta Solar panels, used next to windows and doors.

• Product propertiesProduct name Support stud VAP 25 Standard length 2515 mm Special range mmWeight 1,1 kg/m Unit m

• Materials, coatings and colours1,0 mm Galvanized steel1,0 mm Colour coated steel, Pural RR23 both sides


• Intended useSub-frame for façade claddings (excluding Cor-Ten claddings).

• NoteVentilated (perforation rate 29%)Fixing holes d=6mm, c/c 56mm

• Product propertiesProdcut name Support bracket CA1SB01Thickness 1,5mm stainless steelWeight 0,06 kg/pcPackage unit pc

• Intended useHanging Primo Skyline 150 panels to support stud CA1SS1. Bracket includes EPDM separator as shown in the picture above.


• Product propertiesProduct name Support stud joint piece CA1SSJ1Standard length 200 mmBlank width 99 mmWeight 0,23 kg/pcs (steel)Unit pcs

• Materials, coatings and colours1,5 mm Zinc coated steel1,5 mm Aluminum

• Intended useConnecting support studs CA1SS1 together. Recommended when using adjustable bracket system.







• Product propertiesProdcut name Support bracket CA1SB02Thickness 1,5 mm stainless steelWeight 0,08 kg/pcPackage unit pc

• Intended useFastening Liberta Cor-Ten 800 panels onto support stud CA1SS3. Joint piece includes needed EPDM separators as shown in the product picture above.

• Product propertiesProdcut name Support bracket CA1APLThickness 3 mm aluminiumWeight 0,28 kg/pcPackage unit pc

• Intended useHanging Primo Skyline 1000 to support studs. Long bracket. Fixed to studs.

• Product propertiesProdcut name Support bracket CA1APCThickness 3 mm aluminiumWeight 0,08 kg/pcPackage unit pc

• Intended useHanging Primo Skyline 1000 to support studs. Adjustable bracket. Fixed to panel.

• Product propertiesProdcut name Support bracket CA1APMThickness 3 mm aluminiumWeight 0,07 kg/pcPackage unit pc

• Intended useHanging Primo Skyline 1000 to support studs. Fixed to panel.


• Product propertiesProduct name Adjustable stud CA1SS5Standard length 3000 mm Special range 150–3000 mm Blank width 193 mmWeight 1,8 kg/mUnit m


Colour chart

Coating Colour

Stee

l

Standard chart

HIARC RR20, 21, 23, 40, 41, 42, 43


Colourful chart


RR11, 22, 24, 26, 29, 30, 31, 32, 33, 34, 35, 36, 37, 44, 45, 750

Powder paint


Colourful chart


Alum

inum

Powder paint



• Intended useBottom part of 2-part adjustable stud system, used together with Adjustable stud CA1SS6. See next page for more information.

• Product propertiesProdcut name Support bracket CA1APSThickness 3 mm aluminiumWeight 0,09 kg/pcPackage unit pc

• Intended useHanging Primo Skyline 1000 to support studs. Short bracket. Fixed to studs.


• Product propertiesProduct name Adjustable stud CA1SS6Standard length 3000 mm Special range 150–4000 mm Blank width 183 mmWeight 1,7 kg/mUnit m


Colour chart

Coating Colour

Stee

l

Standard chart

HIARC RR20, 21, 23, 40, 41, 42, 43


Colourful chart


RR11, 22, 24, 26, 29, 30, 31, 32, 33, 34, 35, 36, 37, 44, 45, 750

Powder paint


Colourful chart


Alum

inum

Powder paint



• Intended useTop part of 2-part adjustable stud system, used together with Adjustable stud CA1SS5. See next page for more information.

Screw S3H06022D03S4B 100c/c 300

Screw S3H06022D03S4B 100c/c 300

Fastener type and centres case by case


• Installation of adjustable studs CA1SS5 and CA1SS6

Screw S3H06022D03S4B 100c/c 300

Screw S3H06022D03S4B 100c/c 300




• NoteThe friction between studs helps to keep them together while adjusting the depth during installation. Studs must be locked together with fastening screws immediately after adjusting.


• Product propertiesProduct name Starting fillet CA1SF2Standard length 3000 mmSpecial range 150–3000 mmBlank width 70 mmWeight 0,66 kg/m (steel)Unit m

• Materials, coatings and colours1,2 mm Colour coated steel1,5mm Colour coated aluminum

Colour chart

Coating Colour

Stee

l

Standard chart

HIARC RR20, 21, 23, 40, 41, 42, 43


Colourful chart


RR11, 22, 24, 26, 29, 30, 31, 32, 33, 34, 35, 36, 37, 44, 45, 750

Powder paint


Colourful chart


Alum

inum

Powder paint



• Intended useStarting fillet for Liberta elegant 500 / 500 Grande



Colour chart

Coating Colour

Stee

l

Standard chart

HIARC RR20, 21, 23, 40, 41, 42, 43


Colourful chart


RR11, 22, 24, 26, 29, 30, 31, 32, 33, 34, 35, 36, 37, 44, 45, 750

Powder paint


Colourful chart


Alum

inum

Powder paint



• Intended useStarting fillet for Lamella groove 10 / groove 20




Colour chart

Coating Colour

Stee

l

Standard chart

HIARC RR20, 21, 23, 40, 41, 42, 43


Colourful chart


RR11, 22, 24, 26, 29, 30, 31, 32, 33, 34, 35, 36, 37, 44, 45, 750

Powder paint


Colourful chart


Alum

inum

Powder paint



• Intended useStarting fillet for Lamella sharp 45



Colour chart

Coating Colour

Stee

l

Standard chart

HIARC RR20, 21, 23, 40, 41, 42, 43


Colourful chart


RR11, 22, 24, 26, 29, 30, 31, 32, 33, 34, 35, 36, 37, 44, 45, 750

Powder paint


Colourful chart


Alum

inum

Powder paint



• Intended useStarting fillet for Lamella lap 60




Colour chart

Coating Colour

Stee

l

Standard chart

HIARC RR20, 21, 23, 40, 41, 42, 43


Colourful chart


RR11, 22, 24, 26, 29, 30, 31, 32, 33, 34, 35, 36, 37, 44, 45, 750

Powder paint


Colourful chart


Alum

inum

Powder paint



• Intended useStarting fillet for Lamella straight 100


• Materials, coatings and colours 1,5 mm Steel Cor-Ten A


• Intended useStarting fillet for Lamella Cor-Ten 20

• Product propertiesProduct name Starting fillet CA1SF9Standard length 3000 mmSpecial range 150–3 000 mmBlank width 54 mmWeight 0,52 kg/m (steel)Unit m

• Materials, coatings and colours1,2 mm Colour coated steel1,5 mm Colour coated aluminium

Colour chart

Coating Colour

Stee

l

Standard chart

HIARC RR20, 21, 23, 40, 41, 42, 43


Colourful chart


RR11, 22, 24, 26, 29, 30, 31, 32, 33, 34, 35, 36, 37, 44, 45, 750

Powder paint


Colourful chart


Alum

inum

Powder paint



• Intended useStarting fillet for Liberta 550

• Product propertiesProduct name Starting fillet CA1SF10Standard length 3000 mmSpecial range 150–3 000 mmBlank width 40 mmWeight 0,21 kg/m (steel)Unit m

• Materials, coatings and colours2 mm Aluminium


• Intended useStarting fillet for Primo Skyline 100



• Product propertiesProduct name Plinth flashing CA1P2XStandard length 3000 mmSpecial range 150–4000 mmBlank width Depends on A, B, C measuresMinimum values A: 12 B: 12 C: 12 Weight -Unit m

• Materials, coatings and colours1,0 mm Steel Cor-Ten A


• Intended useFor covering the space between cladding and plinth. Used with Cor-Ten facade claddings.

• Product propertiesProduct name Plinth flashing CA1P1XStandard length 3000 mmSpecial range 150–4000 mmBlank width Depends on A, B, C measuresMinimum values A: 10 B: 12 C: 15 Weight -Unit m

• Materials, coatings and colours0,6 mm Colour coated steel0,7 mm Colour coated aluminum

Colour chart

Coating Colour

Stee

l

Standard chart

HIARC RR20, 21, 23, 40, 41, 42, 43


Colourful chart


RR11, 22, 24, 26, 29, 30, 31, 32, 33, 34, 35, 36, 37, 44, 45, 750

Powder paint


Colourful chart


Alum

inum

Powder paint



• Intended useFor covering the space between facade cladding and plinth.


• Product propertiesProduct name Sill flashing CA1S2XStandard length 3000 mmSpecial range 150–4000 mmBlank width Depends on A, B, C measuresMinimum values A: 12 B: 12 C: 12Weight -Unit m



• Intended useFor covering the space between facade cladding and window cill. Used with Cor-Ten facade claddings.

• Product propertiesProduct name Sill flashing CA1S1XStandard length 3000 mmSpecial range 150–4000 mmBlank width Depends on A, B, C measuresMinimum values A: 10 B: 12 C: 15Weight -Unit m

• Materials, coatings and colours0,6 mm Steel0,7 mm Aluminum

Colour chart

Coating Colour

Stee

l

Standard chart

HIARCRR20, RR21, RR22, RR23, RR40, 41, 45


Colourful chart


RR11, RR24, RR26, RR29, RR30, RR31, RR32,RR33, RR34, RR35, RR36, RR37, RR42, RR43, RR44, RR750

Powder paint

RAL and NCS colours available by request

Colourful chart

PVDFRAL and NCS colours available by request

Alum

inum

Powder paint

RR, RAL and NCS colours available by request

Minimum order sizes:- Standard chart: No limitations- Colorful chart: decided on a project basis

• Intended useFor covering the space between facade cladding and window cill.


• Product propertiesProduct name Vertical joint flashing CA1VJ1Standard length 3000 mmSpecial range 150–4000 mmBlank width 192 mmWeight 0,90 kg/m (steel)Unit m


Colour chart

Coating Colour

Stee

l

Standard chart

HIARC RR20, 21, 23, 40, 41, 42, 43


Colourful chart


RR11, 22, 24, 26, 29, 30, 31, 32, 33, 34, 35, 36, 37, 44, 45, 750

Powder paint


Colourful chart


Alum

inum

Powder paint



• Intended useVertical joint flashing for Design profiles and Cladding lamellas.



Colour chart

Coating Colour

Stee

l

Standard chart

HIARC RR20, 21, 23, 40, 41, 42, 43


Colourful chart


RR11, 22, 24, 26, 29, 30, 31, 32, 33, 34, 35, 36, 37, 44, 45, 750

Powder paint


Colourful chart


Alum

inum

Powder paint







Colour chart

Coating Colour

Stee

l

Standard chart

HIARC RR20, 21, 23, 40, 41, 42, 43


Colourful chart


RR11, 22, 24, 26, 29, 30, 31, 32, 33, 34, 35, 36, 37, 44, 45, 750

Powder paint


Colourful chart


Alum

inum

Powder paint






Colour chart

Coating Colour

Stee

l

Standard chart

HIARC RR20, 21, 23, 40, 41, 42, 43


Colourful chart


RR11, 22, 24, 26, 29, 30, 31, 32, 33, 34, 35, 36, 37, 44, 45, 750

Powder paint


Colourful chart


Alum

inum

Powder paint





• Product propertiesProduct name Vertical joint flashing CA1VJ5Standard length 3000 mmSpecial range 150–4000 mmBlank width 152 mmWeight 0,72 kg/mUnit m


Colour chart

Coating Colour

Stee

l

Standard chart

HIARC RR20, 21, 23, 40, 41, 42, 43


Colourful chart


RR11, 22, 24, 26, 29, 30, 31, 32, 33, 34, 35, 36, 37, 44, 45, 750

Powder paint


Colourful chart


Alum

inum

Powder paint






Colour chart

Coating Colour

Stee

l

Standard chart

HIARC RR20, 21, 23, 40, 41, 42, 43


Colourful chart


RR11, 22, 24, 26, 29, 30, 31, 32, 33, 34, 35, 36, 37, 44, 45, 750

Powder paint


Colourful chart


Alum

inum

Powder paint





• Product propertiesProduct name Vertical joint flashing CA1VJ7XStandard length 3000 mmSpecial range 150–4000 mmBlank width Depends on A, B measuresMinimum values A: 20 B: 12Maximum values B: 55Weight -Unit m


Colour chart

Coating Colour

Stee

l

Standard chart

HIARC RR20, 21, 23, 40, 41, 42, 43


Colourful chart


RR11, 22, 24, 26, 29, 30, 31, 32, 33, 34, 35, 36, 37, 44, 45, 750

Powder paint


Colourful chart


Alum

inum

Powder paint






Colour chart

Coating Colour

Stee

l

Standard chart

HIARC RR20, 21, 23, 40, 41, 42, 43


Colourful chart


RR11, 22, 24, 26, 29, 30, 31, 32, 33, 34, 35, 36, 37, 44, 45, 750

Powder paint


Colourful chart


Alum

inum

Powder paint







Colour chart

Coating Colour

Stee

l

Standard chart

HIARC RR20, 21, 23, 40, 41, 42, 43


Colourful chart


RR11, 22, 24, 26, 29, 30, 31, 32, 33, 34, 35, 36, 37, 44, 45, 750

Powder paint


Colourful chart


Alum

inum

Powder paint





• Materials, coatings and colours1,5 mm steel Cor-Ten A


• Intended useVertical joint flashing for Cladding lamellas (Cor-Ten).





• Intended useVertical joint flashing for Design profiles (Cor-Ten).

• Product propertiesProduct name External corner flashing CA1EC1XStandard length 3000 mmSpecial range 150–4000 mmBlank width Depends on A, B measuresMinimum values A: 10 B: 12Weight -Unit m


Colour chart

Coating Colour

Stee

l

Standard chart

HIARC RR20, 21, 23, 40, 41, 42, 43


Colourful chart


RR11, 22, 24, 26, 29, 30, 31, 32, 33, 34, 35, 36, 37, 44, 45, 750

Powder paint


Colourful chart


Alum

inum

Powder paint



• Intended useExternal corner flashing for Design profiles and Cladding lamellas.


• Product propertiesProduct name External corner flashing CA1EC4Standard length 3000 mmSpecial range 150–4000 mmBlank width 150 mmWeight 0,71 kg/m (steel)Unit m


Colour chart

Coating Colour

Stee

l

Standard chart

HIARC RR20, 21, 23, 40, 41, 42, 43


Colourful chart


RR11, 22, 24, 26, 29, 30, 31, 32, 33, 34, 35, 36, 37, 44, 45, 750

Powder paint


Colourful chart


Alum

inum

Powder paint






Colour chart

Coating Colour

Stee

l

Standard chart

HIARC RR20, 21, 23, 40, 41, 42, 43


Colourful chart


RR11, 22, 24, 26, 29, 30, 31, 32, 33, 34, 35, 36, 37, 44, 45, 750

Powder paint


Colourful chart


Alum

inum

Powder paint





• Product propertiesProduct name External corner flashing CA1EC6Standard length 3000 mmSpecial range 150–4000 mmBlank width 288 mmWeight 1,4 kg/mUnit m


Colour chart

Coating Colour

Stee

l

Standard chart

HIARC RR20, 21, 23, 40, 41, 42, 43


Colourful chart


RR11, 22, 24, 26, 29, 30, 31, 32, 33, 34, 35, 36, 37, 44, 45, 750

Powder paint


Colourful chart


Alum

inum

Powder paint




• Product propertiesProduct name External corner flashing CA1EC7XStandard length 3000 mmSpecial range 150–4000 mmBlank width Depends on A, B measuresMinimum values A: 20 B: 12Maximum values B: 55Weight -Unit m


Colour chart

Coating Colour

Stee

l

Standard chart

HIARC RR20, 21, 23, 40, 41, 42, 43


Colourful chart


RR11, 22, 24, 26, 29, 30, 31, 32, 33, 34, 35, 36, 37, 44, 45, 750

Powder paint


Colourful chart


Alum

inum

Powder paint







Colour chart

Coating Colour

Stee

l

Standard chart

HIARC RR20, 21, 23, 40, 41, 42, 43


Colourful chart


RR11, 22, 24, 26, 29, 30, 31, 32, 33, 34, 35, 36, 37, 44, 45, 750

Powder paint


Colourful chart


Alum

inum

Powder paint



• Intended useExternal corner flashing for Cladding lamellas.



Colour chart

Coating Colour

Stee

l

Standard chart

HIARC RR20, 21, 23, 40, 41, 42, 43


Colourful chart


RR11, 22, 24, 26, 29, 30, 31, 32, 33, 34, 35, 36, 37, 44, 45, 750

Powder paint


Colourful chart


Alum

inum

Powder paint





• Product propertiesProduct name External corner flashing CA1EC10XStandard length 3000 mmSpecial range 150–4000 mmBlank width Depends on A, B, C measuresMinimum values A: 30 B: 30 C: 12Weight -Unit m


Colour chart

Coating Colour

Stee

l

Standard chart

HIARC RR20, 21, 23, 40, 41, 42, 43


Colourful chart


RR11, 22, 24, 26, 29, 30, 31, 32, 33, 34, 35, 36, 37, 44, 45, 750

Powder paint


Colourful chart


Alum

inum

Powder paint



• Intended useExternal corner flashing for Cladding lamella Vertical 70.

• Product propertiesProduct name External corner flashing CA1EC11XStandard length 3000 mmSpecial range 150–4000 mmBlank width Depends on A, B, C measuresMinimum values A: 10 B: 12 C: 12Weight -Unit m


Colour chart

Coating Colour

Stee

l

Standard chart

HIARC RR20, 21, 23, 40, 41, 42, 43


Colourful chart


RR11, 22, 24, 26, 29, 30, 31, 32, 33, 34, 35, 36, 37, 44, 45, 750

Powder paint


Colourful chart


Alum

inum

Powder paint







Colour chart

Coating Colour

Stee

l

Standard chart

HIARC RR20, 21, 23, 40, 41, 42, 43


Colourful chart


RR11, 22, 24, 26, 29, 30, 31, 32, 33, 34, 35, 36, 37, 44, 45, 750

Powder paint


Colourful chart


Alum

inum

Powder paint






Colour chart

Coating Colour

Stee

l

Standard chart

HIARC RR20, 21, 23, 40, 41, 42, 43


Colourful chart


RR11, 22, 24, 26, 29, 30, 31, 32, 33, 34, 35, 36, 37, 44, 45, 750

Powder paint


Colourful chart


Alum

inum

Powder paint








• Intended useExternal corner flashing for Cladding lamellas (Cor-Ten).




• Intended useExternal corner flashing for Design profiles (Cor-Ten).


• Product propertiesProduct name Internal corner flashing CA1IC1XStandard length 3000 mmSpecial range 150–4000 mmBlank width Depends on A, B measuresMinimum values A: 10 B: 12Weight -Unit m


Colour chart

Coating Colour

Stee

l

Standard chart

HIARC RR20, 21, 23, 40, 41, 42, 43


Colourful chart


RR11, 22, 24, 26, 29, 30, 31, 32, 33, 34, 35, 36, 37, 44, 45, 750

Powder paint


Colourful chart


Alum

inum

Powder paint



• Intended useInternal corner flashing for Design profiles, Cladding lamellas, Liberta and Skyline panels.

• Product propertiesProduct name Internal corner flashing CA1IC2XStandard length 3000 mmSpecial range 150–4000 mmBlank width Depends on A, B,C measuresMinimum values A: 10 B: 12 C: 12Weight -Unit m


Colour chart

Coating Colour

Stee

l

Standard chart

HIARC RR20, 21, 23, 40, 41, 42, 43


Colourful chart


RR11, 22, 24, 26, 29, 30, 31, 32, 33, 34, 35, 36, 37, 44, 45, 750

Powder paint


Colourful chart


Alum

inum

Powder paint



• Intended useInternal corner flashing for Design profiles, Cladding lamellas, Liberta and Skyline panels.


• Product propertiesProduct name Internal corner flashing CA1IC5XStandard length 3000 mmSpecial range 150–4000 mmBlank width Depends on A, B, C measuresMinimum values A: 10 B: 12 C: 12Weight -Unit m


Colour chart

Coating Colour

Stee

l

Standard chart

HIARC RR20, 21, 23, 40, 41, 42, 43


Colourful chart


RR11, 22, 24, 26, 29, 30, 31, 32, 33, 34, 35, 36, 37, 44, 45, 750

Powder paint


Colourful chart


Alum

inum

Powder paint



• Intended useInternal corner flashing for Design profiles, Cladding lamellas and Liberta panels.

• Product propertiesProduct name Internal corner flashing CA1IC6Standard length 3000 mmSpecial range 150–4000 mmBlank width 208 mmWeight 0,98 kg/m (steel)Unit m


Colour chart

Coating Colour

Stee

l

Standard chart

HIARC RR20, 21, 23, 40, 41, 42, 43


Colourful chart


RR11, 22, 24, 26, 29, 30, 31, 32, 33, 34, 35, 36, 37, 44, 45, 750

Powder paint


Colourful chart


Alum

inum

Powder paint



• Intended useInternal corner flashing for Cladding lamellas.




Colour chart

Coating Colour

Stee

l

Standard chart

HIARC RR20, 21, 23, 40, 41, 42, 43


Colourful chart


RR11, 22, 24, 26, 29, 30, 31, 32, 33, 34, 35, 36, 37, 44, 45, 750

Powder paint


Colourful chart


Alum

inum

Powder paint




• Product propertiesProduct name Internal corner flashing CA1IC8XStandard length 3000 mmSpecial range 150–4000 mmBlank width Depends on A, B, C measuresMinimum values A: 12 B: 12 C: 12Weight -Unit m


Colour chart

Coating Colour

Stee

l

Standard chart

HIARC RR20, 21, 23, 40, 41, 42, 43


Colourful chart


RR11, 22, 24, 26, 29, 30, 31, 32, 33, 34, 35, 36, 37, 44, 45, 750

Powder paint


Colourful chart


Alum

inum

Powder paint



• Intended useInternal corner flashing for Cladding lamella Vertical 70.


• Product propertiesProduct name Internal corner flashing CA1IC9Standard length 3000 mmSpecial range 150–4000 mmBlank width 262 mmWeight 1,2 kg/m (steel)Unit m


Colour chart

Coating Colour

Stee

l

Standard chart

HIARC RR20, 21, 23, 40, 41, 42, 43


Colourful chart


RR11, 22, 24, 26, 29, 30, 31, 32, 33, 34, 35, 36, 37, 44, 45, 750

Powder paint


Colourful chart


Alum

inum

Powder paint






Colour chart

Coating Colour

Stee

l

Standard chart

HIARC RR20, 21, 23, 40, 41, 42, 43


Colourful chart


RR11, 22, 24, 26, 29, 30, 31, 32, 33, 34, 35, 36, 37, 44, 45, 750

Powder paint


Colourful chart


Alum

inum

Powder paint





• Product propertiesProduct name Internal corner flashing CA1IC13Standard length 3000 mmSpecial range 150–4000 mmBlank width 178 mmWeight 0,83 kg/mUnit m



• Intended useInternal corner flashing for Cladding lamellas and Liberta panels (Cor-Ten).

• Product propertiesProduct name Internal corner flashing CA1IC14Standard length 3000 mmSpecial range 150–4000 mmBlank width 114 mmWeight 0,54 kg/mUnit m



• Intended useInternal corner flashing for Design profiles (Cor-Ten).

• Product properties Product name Internal Corner flashing CA1IC15XStandard length 3000 mmSpecial Range 150-3000 mmBlank width Depends on A, B measuresMinimum values A: 50 B: 50Weight -Unit m

• Materials, coatings and colours 1,5mm Steel Cor-Ten A


• Intended useInternal corner flashing for Liberta Cor-Ten 800 panels.

• Additional infoBracket cutout locations to be determined per project

• Product properties Product name Internal Corner flashing CA1IC16Standard length 3000 mmSpecial Range 150-5000 mmBlank width Depends on A, B measuresMinimum values A: 25 B: 25Weight -Unit m

• Materials, coatings and colours 4 mm ACM FR4 mm ACM A2

Coating Colour

PVDF 3LMetallic White, Dark Grey Metallic, Traffic Red 3020

PVDF 2L

RAL 9010, Copper Metallic, RAL 7035, Grey Metallic, RAL 7016, RAL 7022, Silver Metallic, Smoke Metallic, Champagne Metallic, Manganese Metallic, RAL 9005, RAL 8019, RAL 3004, RAL 1003, RAL 5002

HQPE Pure Orange 2004

Other colours available upon request

Minimum order sizes: - Shown colours: No limitations - Other colours: Evaluated case by case

• Intended useInternal corner flashing for Primo Skyline 150.



• Product propertiesProduct name Cover flashing CA1C3XStandard length 3000 mmSpecial range 150–4000 mmBlank width Depends on A, B, C measuresMinimum values A: 20 B: 10 C: 30Weight -Unit m


Colour chart

Coating Colour

Stee

l

Standard chart

HIARC RR20, 21, 23, 40, 41, 42, 43


Colourful chart


RR11, 22, 24, 26, 29, 30, 31, 32, 33, 34, 35, 36, 37, 44, 45, 750

Powder paint


Colourful chart


Alum

inum

Powder paint



• Intended useTo cover the interface between window or door and facade cladding.



Colour chart

Coating Colour

Stee

l

Standard chart

HIARC RR20, 21, 23, 40, 41, 42, 43


Colourful chart


RR11, 22, 24, 26, 29, 30, 31, 32, 33, 34, 35, 36, 37, 44, 45, 750

Powder paint


Colourful chart


Alum

inum

Powder paint





• Product propertiesProduct name Cover flashing CA1C6XStandard length 3000 mmSpecial range 150–4000 mmBlank width Depends on A, B, C, D measuresMinimum values A: 12 B: 12 C: 20 D: 12Weight -Unit m


Colour chart

Coating Colour

Stee

l

Standard chart

HIARC RR20, 21, 23, 40, 41, 42, 43


Colourful chart


RR11, 22, 24, 26, 29, 30, 31, 32, 33, 34, 35, 36, 37, 44, 45, 750

Powder paint


Colourful chart


Alum

inum

Powder paint




• Product propertiesProduct name Cover flashing CA1C7XStandard length 3000 mmSpecial range 150–4000 mmBlank width Depends on A, B, C, D measuresMinimum values A: 12 B: 12 C: 12 D: 10Weight - Unit m


Colour chart

Coating Colour

Stee

l

Standard chart

HIARC RR20, 21, 23, 40, 41, 42, 43


Colourful chart


RR11, 22, 24, 26, 29, 30, 31, 32, 33, 34, 35, 36, 37, 44, 45, 750

Powder paint


Colourful chart


Alum

inum

Powder paint





• Product propertiesProduct name Cover flashing CA1C8XStandard length 3000 mmSpecial range 150–4000 mmBlank width Depends on A, B measuresMinimum values A: 10 B: 12Weight -Unit m


Colour chart

Coating Colour

Stee

l

Standard chart

HIARC RR20, 21, 23, 40, 41, 42, 43


Colourful chart


RR11, 22, 24, 26, 29, 30, 31, 32, 33, 34, 35, 36, 37, 44, 45, 750

Powder paint


Colourful chart


Alum

inum

Powder paint



Intended useTo cover the interface between window or door and facade cladding.



Colour chart

Coating Colour

Stee

l

Standard chart

HIARC RR20, 21, 23, 40, 41, 42, 43


Colourful chart


RR11, 22, 24, 26, 29, 30, 31, 32, 33, 34, 35, 36, 37, 44, 45, 750

Powder paint


Colourful chart


Alum

inum

Powder paint







Colour chart

Coating Colour

Stee

l

Standard chart

HIARC RR20, 21, 23, 40, 41, 42, 43


Colourful chart


RR11, 22, 24, 26, 29, 30, 31, 32, 33, 34, 35, 36, 37, 44, 45, 750

Powder paint


Colourful chart


Alum

inum

Powder paint






Colour chart

Coating Colour

Stee

l

Standard chart

HIARC RR20, 21, 23, 40, 41, 42, 43


Colourful chart


RR11, 22, 24, 26, 29, 30, 31, 32, 33, 34, 35, 36, 37, 44, 45, 750

Powder paint


Colourful chart


Alum

inum

Powder paint





• Product propertiesProduct name Cover flashing CA1C13Standard length 3000 mmSpecial range 150–4000 mmBlank width 78 mmWeight 0,92 kg/mUnit m



• Intended useTo cover the interface between window or door and facade cladding (Cor-Ten).

• Product propertiesProduct name Cover flashing CA1C14Standard length 3000 mmSpecial range 150–4000 mmBlank width 47 mmWeight 0,50 kg/mUnit m



• Intended useTo cover the interface between window or door and facade cladding (Cor-Ten).

• Product propertiesProdcut name Cover flashing CA1C16XStandard length 3000 mmSpecial Range 150-3000 mmBlank width Depends on A, B measuresWeight -Unit m

• Materials, coatings and colours 1,5mm Steel Cor-Ten A


• Intended use To cover the vertical interface between window or door and Liberta Cor-Ten 800 panels.

• Additional infoBracket cutout locations to be determined per project




Colour chart

Coating Colour

Stee

l

Standard chart

HIARC RR20, 21, 23, 40, 41, 42, 43


Colourful chart


RR11, 22, 24, 26, 29, 30, 31, 32, 33, 34, 35, 36, 37, 44, 45, 750

Powder paint


Colourful chart


Alum

inum

Powder paint




• Product properties Product name Cover flashing CA1C17Standard length 3000 mmSpecial Range 150-5000 mmBlank width Depends on A, B measuresMinimum values A: 25 B: 25Weight -Unit m

• Materials, coatings and colours 4 mm ACM FR4 mm ACM A2

Coating Colour

PVDF 3LMetallic White, Dark Grey Metallic, Traffic Red 3020

PVDF 2L

RAL 9010, Copper Metallic, RAL 7035, Grey Metallic, RAL 7016, RAL 7022, Silver Metallic, Smoke Metallic, Champagne Metallic, Manganese Metallic, RAL 9005, RAL 8019, RAL 3004, RAL 1003, RAL 5002

HQPE Pure Orange 2004

Other colours available upon request

Minimum order sizes: - Shown colours: No limitations - Other colours: Evaluated case by case

• Intended useTo cover the vertical interface between window or door and Primo Skyline 150 panels.


• Product propertiesProduct name Eaves flashing CA1E1XStandard length 3000 mmSpecial range 150–4000 mmBlank width Depends on A, B, C measuresMinimum values A: 20 B: 12 C: 10Weight -Unit m


Colour chart

Coating Colour

Stee

l

Standard chart

HIARC RR20, 21, 23, 40, 41, 42, 43


Colourful chart


RR11, 22, 24, 26, 29, 30, 31, 32, 33, 34, 35, 36, 37, 44, 45, 750

Powder paint


Colourful chart


Alum

inum

Powder paint



• Intended useEave flashing.


• Product propertiesProduct name Eaves flashing CA1E2XStandard length 3000 mmSpecial range 1 50–4000 mmBlank width Depends on A, B, C measuresMinimum values A: 20 B: 40 C: 12Weight -Unit m


Colour chart

Coating Colour

Stee

l

Standard chart

HIARC RR20, 21, 23, 40, 41, 42, 43


Colourful chart


RR11, 22, 24, 26, 29, 30, 31, 32, 33, 34, 35, 36, 37, 44, 45, 750

Powder paint


Colourful chart


Alum

inum

Powder paint



• Intended useEave flashing.




• Intended useEave flashing (Cor-Ten).





• Intended useEave flashing (Cor-Ten).

• Product propertiesProduct name Storm flashing CA1ST1XStandard length 3000 mmSpecial range 150–4000 mmBlank width Depends on A, B measures Minimum values A: 10 B: 10Weight -Unit m


Colour chart

Coating Colour

Stee

l

Standard chart

HIARC RR20, 21, 23, 40, 41, 42, 43


Colourful chart


RR11, 22, 24, 26, 29, 30, 31, 32, 33, 34, 35, 36, 37, 44, 45, 750

Powder paint


Colourful chart


Alum

inum

Powder paint



• Intended useFor preventing rain water from penetrating the eave structure.


• Product propertiesProduct name Storm flashing CA1ST2XStandard length 3000 mmSpecial range 150–4000 mmBlank width Depends on A, B measures Minimum values A: 12 B: 12 Weight -Unit m



• Intended useFor preventing rain water from penetrating the eave structure (Cor-Ten).

• Product propertiesProduct name Support flashing CA1SU1XStandard length 200 mmBlank width Depends on A, B measuresMinimum values A: 10 B: 10Weight -Unit m


Colour chart

Coating Colour

Stee

l

Standard chart

HIARC RR20, 21, 23, 40, 41, 42, 43


Colourful chart


RR11, 22, 24, 26, 29, 30, 31, 32, 33, 34, 35, 36, 37, 44, 45, 750

Powder paint


Colourful chart


Alum

inum

Powder paint



• Intended useSupport flashing for sill flashings.


• Product propertiesProduct name Support flashing CA1SU2Standard length 3000 mmSpecial range 150–4000 mmBlank width 125 mmWeight 1,2 kg/mUnit m


Colour chart

Coating Colour

Stee

l

Standard chart

HIARC RR20, 21, 23, 40, 41, 42, 43


Colourful chart


RR11, 22, 24, 26, 29, 30, 31, 32, 33, 34, 35, 36, 37, 44, 45, 750

Powder paint


Colourful chart


Alum

inum

Powder paint



• Intended useFor supporting topmost cut lamella, used with following cladding lamella types:- Lamella Groove 10- Lamella Groove 20- Lamella Groove 30

• Product propertiesProduct name Reverse flashing CA1R1XStandard length 200 mmBlank width Depends on A, B, C measuresMinimum values A: 10 B: 12 C: 10Weight -Unit m


Colour chart

Coating Colour

Stee

l

Standard chart

HIARC RR20, 21, 23, 40, 41, 42, 43


Colourful chart


RR11, 22, 24, 26, 29, 30, 31, 32, 33, 34, 35, 36, 37, 44, 45, 750

Powder paint


Colourful chart


Alum

inum

Powder paint



• Intended useFor preventing rain water from penetrating the eave structure, used with following Liberta panels:- Liberta Cor-Ten 600- Liberta Cor-Ten 700- Liberta Cor-Ten 800

Date

Drawn by

Scale

Rev. date

Rev.

Order nr.

Proj. nrFile nr.

Rev.

Contents of drawing

13.09.2019

Karl.K

1 : 2

CA1J1.ipt

Drw. nr.

Copyright © Rautaruukki Corporation. Allowed only for designs with Ruukki's products

Effe

ctive

hei

ght +

30

332,

7Effe

ctive

hei

ght +

33

Effe

ctiv

e he

ight

+ 2

2

Effe

ctiv

e he

ight

+ 2

5

Date

Drawn by

Scale

Rev. date

Rev.

Order nr.

Proj. nrFile nr.

Rev.

Contents of drawing

13.09.2019

Karl.K

1 : 2

CA1J1.ipt

Drw. nr.


Effe

ctive

hei

ght +

30

332,

7Effe

ctive

hei

ght +

33

Effe

ctiv

e he

ight

+ 2

2

Effe

ctiv

e he

ight

+ 2

5


• Product propertiesProduct name Joint piece CA1J1Standard length 90 mmBlank width 358 mmWeight 0,15 kg/pcs (steel)Unit pcs


Colour chart

Coating Colour

Stee

l

Standard chart

HIARC RR20, 21, 23, 40, 41, 42, 43


Colourful chart


RR11, 22, 24, 26, 29, 30, 31, 32, 33, 34, 35, 36, 37, 44, 45, 750

Powder paint

RAL and NCS colours available by request

Colourful chart

PVDFRAL and NCS colours available by request

Alum

inum

Powder paint

RR, RAL and NCS colours available by request


• Intended useFor closing the vertical joints of Lamella Sharp 40 if joint flashings are not used.



Colour chart

Coating Colour

Stee

l

Standard chart

HIARC RR20, 21, 23, 40, 41, 42, 43


Colourful chart


RR11, 22, 24, 26, 29, 30, 31, 32, 33, 34, 35, 36, 37, 44, 45, 750

Powder paint


Colourful chart


Alum

inum

Powder paint



• Intended useFor closing the vertical joints of Lamella Sharp 45 if joint flashings are not used.

Date

Drawn by

Scale

Rev. date

Rev.

Order nr.

Proj. nrFile nr.

Rev.

Contents of drawing

13.09.2019

Karl.K

1 : 2

CA1J1.ipt

Drw. nr.


Effe

ctive

hei

ght +

30

332,

7Effe

ctive

hei

ght +

33

Effe

ctiv

e he

ight

+ 2

2

Effe

ctiv

e he

ight

+ 2

5

Date

Drawn by

Scale

Rev. date

Rev.

Order nr.

Proj. nrFile nr.

Rev.

Contents of drawing

13.09.2019

Karl.K

1 : 2

CA1J1.ipt

Drw. nr.


Effe

ctive

hei

ght +

30

332,

7Effe

ctive

hei

ght +

33

Effe

ctiv

e he

ight

+ 2

2

Effe

ctiv

e he

ight

+ 2

5




Colour chart

Coating Colour

Stee

l

Standard chart

HIARC RR20, 21, 23, 40, 41, 42, 43


Colourful chart


RR11, 22, 24, 26, 29, 30, 31, 32, 33, 34, 35, 36, 37, 44, 45, 750

Powder paint


Colourful chart


Alum

inum

Powder paint



• Intended useFor closing the vertical joints of Lamella Lap 60 if joint flashings are not used.



Colour chart

Coating Colour

Stee

l

Standard chart

HIARC RR20, 21, 23, 40, 41, 42, 43


Colourful chart


RR11, 22, 24, 26, 29, 30, 31, 32, 33, 34, 35, 36, 37, 44, 45, 750

Powder paint


Colourful chart


Alum

inum

Powder paint



• Intended useFor closing the vertical joints of Lamella Straight 100 if joint flashings are not used.


• Product propertiesProduct name Joint piece CA1JP10Standard length 90 mmBlank width Effective height + 40 mmWeight -Unit pcs


Colour chart

Coating Colour

Stee

l

Standard chart

HIARC RR20, 21, 23, 40, 41, 42, 43


Colourful chart


RR11, 22, 24, 26, 29, 30, 31, 32, 33, 34, 35, 36, 37, 44, 45, 750

Powder paint


Colourful chart


Alum

inum

Powder paint



• Intended useFor closing the vertical joints of Lamella Groove 10 if joint flashings are not used

• Product propertiesProduct name Joint piece CA1JP20Standard length 90 mmBlank width Effective height + 45 mmWeight -Unit pcs


Colour chart

Coating Colour

Stee

l

Standard chart

HIARC RR20, 21, 23, 40, 41, 42, 43


Colourful chart


RR11, 22, 24, 26, 29, 30, 31, 32, 33, 34, 35, 36, 37, 44, 45, 750

Powder paint


Colourful chart


Alum

inum

Powder paint



• Intended useFor closing the vertical joints of Lamella Groove 20 if joint flashings are not used


• Product properties Product name: Screw S3H48022D02S4C 250Size: diameter 4.8 mm, length 22 mmHead: 8 mm, hexagonDrilling capacity: Max 3.0 mmClamping range: Max 3.0 mmPackage size: 250 pcs

• MaterialScrew: Austenitic stainless steelWasher: 14 mm stainless steel with vulcanized EPDM rubberCorrosion class: C4

• Intended useFor fastening following products to metal support studs:- All types of Libertas (except Cor-Ten)- All types of Lamellas (except Cor-Ten) - Design profiles T10B, S18 and S55- All Primo Skyline products

• NoteAvailable also as painted to RAL colours.

• Product properties Product name: Screw S3H4825D4S9.5Size: diameter 4,8 mm, length 25 mmHead: 1/4” (6,35 mm), hexagonDrilling capacity: Max 3.0 mmClamping range: Max 13.0 mmPackage size: No limitations

• MaterialScrew: Stainless steelWasher: 9,5 mm aluminum with vulcanized EPDM rubberCorrosion class: C3

• Intended useFor fastening following products to metal support studs:- All types of Design Profiles (incl. Cor-Ten)


• Product properties Product name: Screw S3H60029D03S6B 100Size: diameter 6 mm, length 29 mmHead: 8 mm, hexagonDrilling capacity: Max 3.0 mmClamping range: Max 9.0 mmPackage size: 100 pcs


• Intended useFor fastening following products to metal support studs:- All types of Cor-Ten Libertas- All types of Cor-Ten Lamellas


• Product properties Product name: Screw S3H4835D02S4C 250Size: diameter 4,8 mm, length 35 mmHead: 8 mm, hexagonDrilling capacity: Max 2.0 mmPackage size: 250 pcs

• MaterialScrew: Austenitic stainless steelWasher: 14mm stainless steel with vulcanized EPDM rubberCorrosion class: C4

• Intended useFor fastening following studs to timber frame:- All types of support studs (incl. Cor-Ten)- LED studs (requires pre-punched holes to studs)



• Product properties Product name: Screw S3H55022L02S4B 100Size: diameter 5,5 mm, length 22 mmHead: 8 mm, hexagonDrilling capacity: Max 2.0 mmClamping range: Max 2.0 mmPackage size: 100 pcs


• Intended useFor fastening support studs (excluding Cor-Ten studs) to outer facing of Ruukki sandwich panels.


• Product properties Product name: Screw S3T4826PA0E 1000Size: diameter 4,8 mm, length 26 mmHead: Torx T20Drilling capacity: Max 1.8 mm (steel)Package size: 1000 pcs

• MaterialScrew: Austenitic stainless steelWasher: 10 mm aluminum with vulcanized EPDM rubberCorrosion class: C4

• Intended useFor fastening following products to wooden support studs:- All types of Design Profiles (incl. Cor-Ten)- Flashings (e.g. to wooden window frames)


• Product properties Product name: Screw S3R48022D02A0B 100Size: diameter 4,8 mm, length 22 mmHead: Torx T20WDrilling capacity: Max 2.0 mmClamping range: Max 2.0 mmPackage size: 100 pcs

• MaterialScrew: Austenitic stainless steelWasher: 10 mm aluminum with vulcanized EPDM rubberCorrosion class: C4

• Intended useFor fastening flashings to claddings or aluminum window frames.


• Product properties Product name: Screw S3T7575CS0A 50Size: diameter 7,5 mm, length 75 mmHead: Torx T30Clamping range: Max 10.0 mmPackage size: 50 pcs

• MaterialScrew: Austenitic stainless steel (A5 / EN 1.4571)Washer: 10 mm stainless steel with vulcanized EPDM rubberCorrosion class: C5

• Intended useFor fastening support studs to concrete.

• Note Requires pre-drilling (d=6mm), drilling depth min. 65mm. Concrete class min. C20/25.

Date

Drawn by

Scale

Rev. date

Rev.

Order nr.

Proj. nrFile nr.

Rev.

Contents of drawing

10.12.2019

Karl.K

5 : 1 DIN 933 - M5 x12_threaded.ipt

Drw. nr.


S3H05012G0AD

S3H48022D02BFD

Date

Drawn by

Scale

Rev. date

Rev.

Order nr.

Proj. nrFile nr.

Rev.

Contents of drawing

10.12.2019

Karl.K

5 : 1 DIN 933 - M5 x12_threaded.ipt

Drw. nr.


S3H05012G0AD

S3H48022D02BFD


• Product properties Product name: Screw S3H65024L04BS6E 1000 Size: diameter 6,5 mm, length 24 mmHead: 8mm, hexagonDrilling capacity: Max 2.0 mmClamping range: Max 6.0 mmPackage size: 1000 pcs


• Intended useFor fastening following products to outer facing of Ruukki sandwich panel:- Cor-Ten support studs- LED studs (requires pre-punched holes to studs)

• Product properties Product name: Screw S3H48022D02FDSize: diameter 4,8 mm, length 22 mmHead: 8 mm, hexagonPackage size: 1000 pcs

• MaterialScrew: Austenitic stainless steelCorrosion class: C4

• Intended useFixing of Primo Skyline 1000

• Product propertiesProduct name: Screw S3T5525D06S4B 100 Cor-Ten BrownSize: diameter 5,5 mm, length 25 mmHead: Torx T20Drilling capacity: Max 6.0 mmClamping range: Max 6,0 mmPackage size: 100 pcsColour: Cor-Ten Brown

• MaterialScrew: Stainless steelWasher: 14 mm stainless steel with vulcanized EPDM rubberCorrosion class: C4

• Intended useFor fastening following products to metal supportstuds:- All types of Cor-Ten Libertas- All types of Cor-Ten Lamellas

• NoteScrew head is brown, however, as Cor-Ten cladding is changing its colour over time, the screw colour is not a full match.

• Product propertiesProduct name: Screw S3H50012GADSize: M5x12,Head: 8 mm, hexagonPackage size: 1000 pcs

• MaterialScrew: Austenitic stainless steeCorrosion class: C4

• Intended useAdjustment of Primo Skyline 1000


• Product propertiesProduct name: Sealing strip EA3SS410Size: width 1O mm, thickness 4 mm

• Materialclosed-cell polyethylene plastic,one-sided adhesive tape

• Intended useinstalled between the window or door frames and cover flashings.

• Product propertiesProduct name: Separating strip EPDM CA3SE410Size: width 10 mm, thickness 4 mm

• MaterialEPDM cellular rubber,one-sided glass fibre reinforced adhesive tape

• Intended useInstalled to following places for separation purposes in Cor-Ten structures:- Between Design Profiles and Support studs- Between support studs and wall structure- Between flashings and cladding products.

• Product propertiesProduct name: Separating piece EPDM CA3SP814Size: width 14 mm, thickness 8 mm

• MaterialEPDM rubber

• Intended useInstalled into the fastening holes of Cor-Ten Libertas and Lamellas for separation purpose.

• Product propertiesProduct name: Separating strip EPDM CA3SE420Size: width 20 mm, thickness 4 mm

• MaterialEPDM cellular rubber,one-sided glass fibre reinforced adhesive tape

• Intended useInstalled to following places for separation purposes in Cor-Ten structures:- Between Design Profiles in overlapping areas- Between support studs and wall structure- Between flashings and cladding products.


• Product propertiesProduct name: Fastening socket CA21165Size: diameter 11 mm, length 65 mmHead: ‘1 / 4 “ (6.35 mm), hexagon

• Intended useTo fasten the S3H4825D4S9.5 screws.

• Product properties Product name: Gap template CA3JGT Length: 250 mm Width: 70 mm Thicknesses: 5 mm (5 mm joint) 10 mm (10 mm joint)Package size: 4 pcs

• MaterialPlastic

• Intended useUsed in installation phase for ensuring correct joint gap width and thermal expansion allowance in Liberta panel joints. Used for following products:- Liberta Original 102 and 102 Grande- Liberta Elegant 500 and 500 Grande- Liberta Elegant 550- Primo Skyline 100 and 150

• NotePlease specify the gap template thickness upon order. Package contains 4 templates of selected thickness.

• Product propertiesProduct name: Pop rivet CA6AF6409DSize: diameter 6,4 mm, length 9 mmType bulb rivetPackage size 1000 pcs

• MaterialBody AluminiumCorrosion class: C3

• Intended useFor riveting brackets CA1APC and CA1APM to Skyline 1000.


• Product propertiesProduct name: Repair paint 0,33 L RA6RP033Gloss: Semi-glossColours: RR11, 20, 22, 24, 29, 30, 32, 33, 34, 35, 37, 40, 42, 43Package size: 1 tin (0.33 l)

• Intended useFor re-painting scratched colour coated steels.

• Product propertiesProduct name: Repair paint 0,1 l RA6RP01 Gloss: MattColours: RR11, RR20, RR22, RR23, RR25, RR29, RR30, RR32, RR33, RR34, RR35, RR36 RR37, RR40, RR41, RR42, RR45 Package size: 1 bottle (0,1 l)

• Intended useFor touch-up painting of scratched colour coated steels.

• Product propertiesProduct name: Repair paint matt 24ml RA6RP0024MGloss: MattColours: RR11, 20, 21, 22, 23, 25, 29, 30, 32, 33, 35, 36, 37, 40, 41, 43, 44, 45, 750,Package size: 1 bottle (24 ml)


• Product propertiesProduct name: Repair paint matt 30ml RA6RP0030MGloss: MattColours: RR11, 21, 22, 23, 29, 32, 33, 750Package size: 1 bottle (30 ml)


CFI.005/EN

/02.20

20/LSB

We make steel-based products for walls and roofs, for both commercial buildings and private homes. We’re a supplier of high-quality products, systems and solutions, developed sustainably and to live up to the highest demands on durability in harsh conditions.

This publication is accurate to the best of our knowledge and understanding. Although every effort has been made to ensure accuracy, the company does not assume any responsibility for any errors or decisions, or any direct, indirect or consequential damage caused by incorrect application of the this information. We reserve the right to make changes. Always see original standards for accurate comparison. For latest technical updates, please visit www.ruukki.com.

Ruukki Construction Oy, Panuntie 11, FI-00620 Helsinki, +358 (0) 20 59 150, www.ruukki.com

Copyright© 2020 Ruukki Construction. All rights reserved. Ruukki and Ruukki’s product names are trademarks or registered trademarks of Rautaruukki Corporation, a subsidiary of SSAB.

Facade claddings - Ruukki

Documents

Transcript of Facade claddings - Ruukki