3D PRINTERS - UP! MINIS

Link: WebsiteModel: ABS & PLA Plastic / 1.75mm / white or blackBuild size: 4.7” x 4.7” x 4.7” / 120 x 120 x 120 mmLayer Thickness: 0.2 / 0.25 / 0.30 / 0.35 mmFile Input: USB with .obj files

FABRICATION LAB EQUIPMENT SPECS

3D PRINTER - WOMBAT JOEY

Link: WebsiteWorking Area: 200mm x 200mm Max. Height of workpiece: 200mmMaterial: PLAFile Input: SD card with gcode files

HAND TOOLS - ASSORTED

Equipment: Screwdrivers, wrenches, hammers, soldering irons, saws, files.

LASER CUTTER – RAYJET 300 EDU

Link: WebsiteWorking Area: 726 x 432 mm (keep in mind the size of our MDF too)Max. thickness of material: The laser cutter is capable of cutting up to 10mm acrylic and 6mm wood. It will not cut metal but can bleach the colour out of Anodized Aluminium and can leave markings on metals using special ceramic coatings that we don’t currently provide.

The Edge currently supplies:Single Corrugated Cardboard: A3, 4mmDouble Corrugated Cardboard: A3, 4mmClear Acrylic: A3, 3mm and 6mmBlack Acrylic: 600x300mm, 3mmWhite Acrylic: 600x300mm, 3mm

With regards to materials outside our current range we will do one of two things.

CHOICE OF OTHER MATERIALS

If you already have the material:We will perform a test on the material to make sure it’s safe to use in the laser, this may take up to 2 weeks.

If you want the material:We will try to source it through our Acrylic or Cardboard suppliers. MDF is not safe to cut on our machine but we are able to do standard plywood, however it will take longer to clean.

File Input: USB with any vector file format that Corel Draw can open ( .svg, .cdr, etc). Different colours can represent different depths. The laser can also accept .ai files, but will need some extra converting through the software.

SEWING MACHINE - REGULAR

Model: Bernina Record

SEWING MACHINE - OVERLOCKER

Link: WebsiteModel: Bernina Overlocker 700D