Fabrication & characterization of non-woven kenaf bast...
Transcript of Fabrication & characterization of non-woven kenaf bast...
UNIVERSm SAINS MALAYSIA
Laporan Akhir Projek Penyelidikan Jangka Pendek
Fabrication & Characterization Of Non-
Woven Kenaf Bast Fibre Filled PolyesterComposites
By
Assoc. Prof. Dr. Razaina Mat Taib
Prof. Zainal Ariffin Mohd Ishak
Dr. Tay Guan SengMr. Mohd Zharif Ahmad Thirmizir
2014
3.7 Fourier transform infrared (FTIR) spectroscopy
3.8 X-ray diffraction (XRD)
3.9 Thermogravimetric analysis (TGA)
3.10 Contact angle measurements
3.11 Fiber tensile test
3.12 Tensile test
3.13 Flexural test
3.14 Fracture toughness test
3.15 Interlaminar shearstrength (ILSS)
3.16 Hygrothermal aging test
Chapter 4 - Results and discussion
4.1 Scanningelectron microscopy (SEM)
4.2 Atomic force microscopy (AFM)
4.3 X-ray photoelectron spectroscopy (XPS)
4.4 Fourier transform infrared (FTIR) spectroscopy
4.5 CrystalUnity index
4.6Thermogravimetric analysis (TGA)
4.7 Contact angle and surface free energy
4.8 Tensile strength
4.9 Tensile properties
4.10 Flexural properties
4.11 Fracture toughness
4.12 Fractured surface morphology