FAAC Product Catalog Price List 2013
Transcript of FAAC Product Catalog Price List 2013
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:10 AM Page 3
Simply Safe +
Simply Green =
Safe & Green
Valid from 01/2013PRICE LIST
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:10 AM Page 3
Contents
Con
tents
2013 Price List
Low Voltage Operators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3E024U Control Board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4S418 Electromechanical Swing Gate. . . . . . . . . . . . . . . . . . . . . . . . . . 6S450H Hydraulic Swing Gate Operator . . . . . . . . . . . . . . . . . . . . . . . . . 8S800H Hydraulic In-Ground Swing Gate Operator . . . . . . . . . . . . . . . 10390 Electromechanical Swing Gate Operator . . . . . . . . . . . . . . . . . 12415 Electromechanical Swing Gate Operator . . . . . . . . . . . . . . . . . 16770 Electromechanical In-Ground Swing Gate Operator . . . . . . . . 20
Pedestrian Door Operator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23950BM Automatic Pedestrian Swing Door Operator . . . . . . . . . . . . . . 24
Bollards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27M30 Crash Rated Automatic Bollards . . . . . . . . . . . . . . . . . . . . . . . 28J Series Automatic, Semi-Automatic and Fixed Traffic Bollards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Pad Mount Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Pad Mount Operators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Telephone Entry System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
AC Gate Operators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 Gate System Safety Brochure . . . . . . . . . . . . . . . . . . . . . . . . . . 46 Choosing the Correct Operators . . . . . . . . . . . . . . . . . . . . . . . . 48 Mounting Geometry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52412 Electromechanical Swing Gate Operator . . . . . . . . . . . . . . . . . 55415 Electromechanical Swing Gate Operator . . . . . . . . . . . . . . . . . 61400 Hydraulic Swing Gate Operator . . . . . . . . . . . . . . . . . . . . . . . . 68402/422 Hydraulic Swing Gate Operator . . . . . . . . . . . . . . . . . . . . . . . . 76750 Hydraulic In-Ground Swing Operator . . . . . . . . . . . . . . . . . . . . 84760 Hydraulic In-Ground Swing Operator . . . . . . . . . . . . . . . . . . . . 92
Barrier Operators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101615 Hydraulic Light Duty Barrier . . . . . . . . . . . . . . . . . . . . . . . . . . 103620 Hydraulic Barrier . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106640 Hydraulic Barrier . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110 Barrier Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
Slide Gate Operators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121746 Slide Gate Operator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125844 Slide Gate Operator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126740 Slide Gate Operator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131
Exploded Views . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153
3
Low Voltage Operators
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:10 AM Page 3
4
E024U 24V Control Board for Swing Gate Operator
The New E024U Control Board is designed to beused with the following FAAC Swing GateOperators:
S418 Electro-mechanical OperatorS450H Hydraulic OperatorS800H Hydraulic in Ground Operator390 Electro-mechanical Operator415 Electro-mechanial Operator770 Electro-mechanical in Ground Operator
Features. UL991 safety standard compliant. Powerful and efficient Switching Power Supply. Easy programming with trimmers and dip switches. One pushbutton automatic self learning. Self resetting fuses. Stand by mode for efficient power use. Built in battery backup. Leaf opening mode selectable: with or without leaf delay.
Technical Specifications
AC input ratings:
Input Power
Motor Output Current
Accessory Power
Operating Temperature
115V - 60Hz400W Max - 4W Stand By7A each24 Vdc 0 500 mA-4°F to131°F (-20°C to 55°C)
E024U
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:10 AM Page 4
5
Low Voltage
E024U 24V Control Board for Swing Gate Operator
Model Description Shipping Wt (approx) Voltage Part Number Price
E024U Power Supply Power SUpply for E024U 2 lbs. (.9 kg) 24vdc 750007 $156.00
E024U Control Panel 24vdc (replacement only) 2 lbs. (.9 kg) 24vdc 202025 $541.00
3350 Enclosure Enclosure - 24V 14x16 16 kbs, (7 kg) 24vdc 3350 $563.00
Enclosure Kit E024U Enclosure Kit E024U includes E024U 4b, Power Supply -3350 $1,281.00Battery Cable
E024U Loop Detector Rack E024U Loop Detector Interface (free exit, safety & 1 lbs. (.45kg) 2670 $120.00shadow loop bases).
* If you have any questions regarding your application, please call FAAC’s technical department at 1-866-925-3222 or 1-800-221-8278.
+
A B STP CL OP OPEN FSW
OPEN DEVICES
STOPINPUT
CLOSESAFETY
OPENSAFETY
MOTORSELECTION
DS2
S450HS800H
S418
415390770
MAGLOCK
SOLENOID
SemiautomaticPulse OpenPulse Close
Automaticwith Timer
Close
SemiautomaticStep by Step
DS1
FORCEMOTOR 1
FORCEMOTOR 2
SPEED SENS PAUSE CLOSEDELAY
RADIOCONNECTOR
BATTERYCONNECTOR
LED SETUP
BATTERY CHARGING
ON OFF
DC POWERINPUT
DS1
LED ERROR
LED BATTERY
SETUP STARTBUTTON
LED POWER ON
USBCONNECTOR
LEDUSB
PEN
L
MAINFUSE
ENCODER(S450H and S800H ONLY)
LIMIT SWITCHES(415 and 390 ONLY)
OPER. 1 OPER. 2
OPEN
CLOSE
OPEN
CLOSE
SAFETY CONNECTIONS
IF NOT USED MUST BE JUMPERED(N.C. INPUTS)
DS2
TEST BUTTON
+
TO BATTERY
+
L N GND115 VAC POWERAC P15 V VAC POWER1
AC POWER
LAC P15 V VAC POWER1
N
FUSEMAIN
LN
PE
AC POWERGND
ON BUTTTEST
ORCONNECTRADIO
CHARGINGYTTERBA
OFFON
YTTERBALED
+
+
+YTTERO BAT
Closeimer with T
Automatic
Pulse ClosePulse Open
Semiautomatic
SemiautomaticMOTFORCE
DS1
PSENSSPEEDOR 2MOT
FORCEOR 1MOT
FORCE
SETUPLED
USBLED
ONBUTTTAR ST TARSETUP
DS1
DS2
SELECTIONORMOT
YDELACLOSEAUSEPPAUSE
ORCONNECTYTTERBAPOWER ON
LED YTTERBA
ERRORLED
DS1
+
390415
S418
S800HS450H
INPUTDC POWER
Step by StepSemiautomatic
(S450H and S800H ONL
NEPOA
CONNECTUSB
Y)(S450H and S800H ONLENCODER
WSFNPOLCPTSB
ORCONNECTUSB
ERROR
770390
INPUTOPST
DEVICESOPEN
INPUTOP N
EPO
ESOLC
NEPO
ESOLC
OPER. 2OPER. 1
Y)(415 and 390 ONL SWITCHESLIMIT
DS2
SAFETY
SAFETYCLOSE
SAFETYOPEN
SAFETYCLOSE
(N.C. INPUTS)MUST BE JUMPEREDIF NOT USED
CONNECTIONSSAFETY
SOLENOID
MAGLOCK
MUST BE JUMPEREDIF NOT USED
CONNECTIONS
SOLENOID
MAGLOCK
E024U Control Board Diagram
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:10 AM Page 5
6
Model S418 Electromechanical Swing Gate Operator
Model S418
Model S418 dimensions
The Model S418 was designed to provide powerand versatility to an economical residential swingoperator. Features. Sleek design. Positive stops built in. BBU. Residential & light commmercial use. New control board with anti-crushing system and
electronic encoder for inversion of obstacle.
Specifications
Duty cycle
Maximum gate swing
90 degree opening time
Maximum weight per gate leaf
Maximum length per gate leaf
Approx. operating temperature range
Voltage
Power Consumption
Current Consumption
Effective Stroke
100%110 degrees13 seconds500 pounds (230 kg)12 feet (3.7 m)-4°F to131°F (-20°C to 55°C)
Primary: 115 VAC
Secondary: 24vdc (100va transformer)
35 W1.5 A14 in. (35 cm) 16 in. (400 mm) w/o mech. stops
NOTE: Operator specifications areapproximate. Environmental factorscan change the performance of the operator.
Batteries are for
emergency back-up
only; not needed to run
system
under normal conditions
.
14 in.
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:10 AM Page 6
7
Low Voltage
Model S418 Electromechanical Swing Gate Operator
Model Package Includes Shipping Wt (approx) Voltage Part Number Price
S418 Basic Single Kit Operator, E024U Control Board, 14x16 encl., power supply 24vdc ) 104301.5+ $1,612and batteries
Model Package Includes Shipping Wt (approx) Voltage Part Number Price
S418 Operator Only Use to make the single kit into a master/slave (bi-parting) kit; or use to order 24vdc 104301 $650 replacement operator. Order necessary length needed for system of two wire cable at no charge; maximum 40 ft per system; part number is 2197
To make the above a master/slave (bi-parting) system use the following:
To complete your gate system installation, or for replacement purposes, the following peripherals can be ordered:
Model
Battery (7.2 amp hour)
Shipping Wt (approx)
6 lbs. (2.7 kg)
1 lbs. (.45 kg)
1 lbs. (.45 kg)
1 lbs. (.45 kg)
1 lbs. (.45 kg)
N/A
2 lbs. (.9 kg)
2 lbs. (.9 kg)
Voltage
12vdc
24vdc
24vdc
Part Number
3540
1tm418ds
787317
785163
1rp418ds
2197
750007
202025
Price
$66
$44
$51
$237
$77
$3.00/ft
$156
$541
Description
Two batteries are needed (replacement only)
FAAC single button
FAAC two button
Directional with diagonal alignment; required for UL-325 compliance
FAAC single channel
For use with master or master/slave system; (included with basickit, see above)
Power Supply for E024U
24vdc (replacement only)
Transmitter
Transmitter
Photobeam
Receiver
Two Wire cable
E024U Power Supply
E024U Control Panel
* If you have any questions regarding your application, please call FAAC’s technical department at 1-866-925-3222 or 1-800-221-8278.
Transmitter 4 Channel transmitter XT 4433 RC 787453 $22
Receiver Receiver 433 RC Plug In 787741 $41
3350 Enclosure Enclossure 24V 16x14 16 lbs (7 kg) 24vdc 3350 $563
E024U Loop Detector Rack E024U Loop Detector Interface (free exit, safety & 1 lb (.45 kg) 2670 $120shadow loop bases).
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:10 AM Page 7
8
Model S450H Hydraulic 24V Swing Gate Operator
Model S450H
The Model S450H was designed to providepower and versatility to a hydraulic residentialand commercial swing operator. Features. Sleek design. Positive stop included. BBU. Multi-position adjustable bracket. Encoder to control operator position. Hybrid Technology that combines advantages
of 24V and hydraulic technology
Specifications
Duty cycle
Maximum gate swing
90 degree opening time
Maximum weight per gate leaf
Maximum length per gate leaf
Approx. operating temperature range
Voltage
Power Consumption
Current Consumption
Effective Stroke
100%110 degrees13 seconds1100 pounds (500 kg)14 feet (4.3 m)-40°F to131°F (-40°C to 55°C)
Primary: 115 VAC
Secondary: 24vdc (100va transformer)
60 W7 A12 1/4 in. (311 mm)
NOTE: Operator specifications areapproximate. Environmental factorscan change the performance of the operator.
Batteries are for
emergency back-up
only; not needed to run
system
under normal conditions
.
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:10 AM Page 8
9
Model S450H Hydraulic 24V Swing Gate Operator
Low Voltage
Model Package Includes Shipping Wt (approx) Voltage Part Number Price
S450H CBAC 24V Basic Single Kit S450H CBAC Operator, E024U Control Board, 14x16 encl., 24vdc 104100.5+ $2,704Power Supply and batteries
S450H SB 24V Basic Single Kit S450H SB Operator, E024U Control Board, 14x16 encl., 24vdc 104101.5+ $2,704Power Supply and batteries
Model Package Includes Shipping Wt (approx) Voltage Part Number Price
S450H CBAC 24V Use to make the single kit into a master/slave (bi-parting) kit; or use to order 24vdc 104100 $1,664Operator Only replacement operator. Order necessary length needed for system of two wire
cable at no charge; maximum 40 ft per system. Part # 2197 for power and two wire cable Part #2193 for the encoder
S450H SB 24V Use to make the single kit into a master/slave (bi-parting) kit; or use to order 24vdc 104101 $1,664Operator Only replacement operator. Order necessary length needed for system of two wire
cable at no charge; maximum 40 ft per system. Part # 2197 for power and two wire cable Part #2193 for the encoder
To make the above a master/slave (bi-parting) system use the following:
To complete your gate system installation, or for replacement purposes, the following peripherals can be ordered:
Model
Battery (7.2 amp hour)
Shipping Wt (approx)
6 lbs. (2.7 kg)
1 lbs. (.45 kg)
1 lbs. (.45 kg)
1 lbs. (.45 kg)
1 lbs. (.45 kg)
N/A
2 lbs. (.9 kg)
Voltage
12vdc
24vdc
24vdc
Part Number
3540
1tm418ds
787317
785163
1rp418ds
2197
750007
202025
Price
$66
$44
$51
$237
$77
$3.00/ft
$156
$541
Description
Two batteries are needed (replacement only)
FAAC single button
FAAC two button
Directional with diagonal alignment; required for UL-325 compliance
FAAC single channel
For use with master or master/slave system; (included with basickit, see above)
Power Supply for E024U
24vdc (replacement only)
Transmitter
Transmitter
Photobeam
Receiver
Two Wire cable
E024U Power Supply
E024U Control Panel
* If you have any questions regarding your application, please call FAAC’s technical department at 1-866-925-3222 or 1-800-221-8278.
Transmitter 4 Channel transmitter XT 4433 RC 787453 $22
Receiver Receiver 433 RC Plug In 787741 $41
3350 Enclosure Enclossure 24V 16x14 16 lbs (7 kg) 24vdc 3350 $563
E024U Loop Detector Rack E024U Loop Detector Interface (free exit, safety & 1 lb (.45 kg) 2670 $120shadow loop bases).
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:10 AM Page 9
10
Model S800H Hydraulic 24V Swing Gate Operator
SpecificationsDuty cycleMaximum gate swing90 degree opening timeMaximum weight per gate leafMaximum length per gate leafApprox. operating temperature rangeVoltage
Power consumption
100%110 degrees (180 degrees)13 seconds1760 pounds (800 kg)13 feet (4 m)-40°F to13°F (-40°C to +55°C)Primary: 115 VACSecondary: 24vdc (100va transformer)60 W
NOTE: Operator specifications areapproximate. Environmental factors canchange the performance of the operator.
Model S800H in-ground application
The Model S800H was designed for in-ground installation soas not to detract from the appearance of the gate.
Features. Invisible installation . Minimized “pinch points” . Reverse on contact. Operates even in case of power failure
(subject to battery condition). Slow down “soft stop”. Optional 110o or 180o opening kits available. Built-in positive stops (minimum leaf opening of 135°
for 180° version).. Magnetic encoder. Stainless steel load bearing box available
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:10 AM Page 10
11
Model S800H Hydraulic 24V Swing Gate Operator
Low Voltage
Model
S800H 100°Basic Single Kit
S800H 180°Basic Single Kit
Shipping Wt(approx.)
Voltage
24vdc(Transformer)
24vdc(Transformer)
Part Number
108710.5+
108712.5+
Price
$3,952
$4,212
Package IncludesOperator, support box, E024U control panel, 14x16 in.enclosure, steel load bearing box, power supply, manualrelease, batteries, splined shaft
Operator, support box, E024U control panel, 14x16 in.enclosure, steel load bearing box, power supply, manualrelease, batteries, splined shaft
Model
S800H 100°Basic Single Kit Stainless Steel
S800H 180°Basic Single Kit Stainless Steel
Shipping Wt(approx.)
Voltage
24vdc(Transformer)
24vdc(Transformer)
Part Number
108710.5SS+
108712.5SS+
Price
$4,378
$4,638
Package IncludesOperator, support box, E024U control panel, 14x16 in.enclosure, stainless steel load bearing box, power supply,manual release, batteries, splined shaft
Operator, support box, E024U control panel, 14x16 in.enclosure, stainless steel load bearing box, power supply,manual release, batteries, splined shaft
ModelOperator Only S800H
Load Bearing Box SteelLoad Bearing Box Stainless SteelOperator Only S800H SBW (wind version)call us for more info and ordering!
Shipping Wt(approx.)
Voltage
24vdc(Transformer)
24vdc(Transformer)
Part Number108710100°
108712180°
490112
490113
108714100°
108715180°
Price$2,392
$2,558
$562$988$2.392
$2,558
Package Includes
Use to make the single kit into a master/slave (bi-part-ing) kit; or use to order replacement operator. Order nec-essary length needed for system of two wire cable at nocharge; maximum 40 ft per system. Part # 2197 ofpower and two wire cable Part #2193 for the encoder
Needed with operator for bi-parting system
Needed with operator for bi-parting system
Use to make the single kit into a master/slave (bi-part-ing) kit; or use to order replacement operator. Order nec-essary length needed for system of two wire cable at nocharge; maximum 40 ft per system. Part # 2197 ofpower and two wire cable Part #2193 for the encoder
To make the above a master/slave (bi-parting) system use the following:
To complete your gate system installation, or for replacement purposes, the following peripherals can be ordered:
Model Description Shipping Wt Voltage Part Number Price(approx.)
Battery (7.2 amp hour) Two batteries are needed (replacement only) 6 lbs. (2.7 kg 12vdc 3540 $66Transmitter FAAC single button 1 lb. (.45 kg) 1tm418ds $44
Transmitter FAAC two button 1 lb. (.45 kg) 787317 $51
Photobeam Directional with diagonal alignment; required for UL-325 compliance 1 lb. (.45 kg) 785163 $237
Receiver FAAC single channel 1 lb. (.45 kg) 1RP418ds $77
Two Wire Cable For use in Master/Slave Systems 1 lb. (.45 kg) 2197 $3.00/ft
Splined Shaft For S800H 390972 $182
Manual Release Hydraulic 390035 $224
Power Supply for E024U Power Supply for E024U 750007 $156
E024U Control Board 24vdc (replacement only) 2 lb. (.9 kg) 24vdc 202025 $541
Transmitter 4 Channel transmitter XT 4433 RC 787453 $22Receiver Receiver 433 RC Plug In 787741 $41
3350 Enclosure Enclosure 24V 16x14 16 lbs. (7 kg) 24vdc 3350 $563
E024U Loop Detector Rack E024U Loop Detector Interface (free exit, safety & 1 lb (.45 kg) 2670 $120shadow loop bases).
* If you have any questions regarding your application, please call FAAC’s technical department at 1-866-925-3222 or 1-800-221-8278.
NEW
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:10 AM Page 11
Model 390
Mod
el 3
90
FAAC operators for swinging gates areamong the safest available. The anti-entrap-ment and safety provided by all gate opera-tors can and should be improved with photo-cells, loop detectors, sensing edges and/orother similar devices. FAAC strongly recom-mends that devices such as these beinstalled with all automated gate systems.
To guarantee the safety and efficiency of itsequipment, FAAC strongly recommends thatqualified personnel test the safety system onan annual basis, as well as maintain theoverall hydraulic or mechanical system.
Low Voltage Swing Gate Operator
.Designed for residential use
. Two year limited warranty(see back cover)
12
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:10 AM Page 12
Model 390 Electromechanical Swing Gate Operator
NOTE: Operator specifications are approximate. Environmental factors can change theperformance of the operator.
The 390 is also ideal for swinging garage doors.
Model 390
The Model 390 was designed primarily to accom-modate large pillar installations.
. Easy installation
. No gate modifications are necessary
. Operates even in case of power failure (with optional battery back-up and subject to battery condition)
. Reverse on contact
. Slow down “soft stop”
Specifications
Duty cycleMaximum gate swing90 degree opening timeMaximum weight per gate leafMaximum length per gate leafApprox. operating temperature rangeVoltage
Absorbed powerProtection class
100%120 degrees13 seconds600 pounds (181.4 kg)14 feet (3 m)-4°F to131°F (-20°C to 55°C)Primary: 115 VACSecondary: 24vdc (100va transformer)3 WNema 4x
Batteries are fo
r
emergency back-u
p
only; not neede
d to run
system under normal
conditions.
Low Voltage
13
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:10 AM Page 13
Model 390 Electromechanical Swing Gate Operator
Model Package Includes Shipping Wt Voltage Part Number Price(approx.)
Model 390 Operator, E024U Control Board, 14x16 enclosure, Power 58 lbs. (26.3kg) 24vdc 104572.5E+ $2,063Basic Single Kit Supply, batteries, and 2 limit switchesw/E024U Board
Model Package Includes Shipping Wt Voltage Part Number Price(approx.)
390 Operator Only Use to make the single kit into a master/slave (bi-parting) 24 lbs. (10.9kg) 24vdc 104572 $933kit; or use to order replacement operator. Order necessary (Transformer)length needed for system of two wire cable part #2197 for power and two wire cable part #2192 for limit switch at no charge; up to 40 ft per system and add 2 limit switches.
To make the above a master/slave (bi-parting) system use the following:
To complete your gate system installation, or for replacement purposes, the following peripherals can be ordered:
Model Package Includes Shipping Wt (approx.) Voltage Part Number Price
Battery Two batteries are needed (replacement only) 6 lbs. (2.7 kg) 12vdc 3540 $66(7.2 amp hour)Limit Switch Shuts operator off; serves as positive stop; one 1 lbs. (.45 kg) 390682 $35
limit needed for open stop, another for closed stopTransmitter FAAC single button dip switch 1 lbs. (.45 kg) 1tm418ds $44
FAAC two button dip switch 787317 $51Photobeam Directional with diagonal alignment; required for UL-325 compliance 1 lbs. (.45 kg) 785163 $237Receiver FAAC single channel 1 lbs. (.45 kg) 1rp418ds $77Two Wire cable Use in Master/Slave Systems 2197 3.00/ftTransformer 24vdc; 100va (replacement only) 5 lbs. (2.3 kg) 24vdc 2114 $122425D Control Panel 24vdc (replacement only) 2 lbs. (.9 kg) 24vdc 63001385 $660Transmitter 4 Channel transmitter XT 4433 RC 787453 $22Receiver Receiver 433 RC Plug In 787741 $41E024U C/P E024U 24vdc Replacement board 2 lbs. (.9 kg) 24vdc 202025 $541E024U Switching Power Supply for E024U Board 2 lbs. (.9 kg) 750007 $156Power SupplyE024U Loop E024U Loop Detector Interface (free exit, safety & 1 lb (.45 kg) 2670 $120
Detector Rack shadow loop bases).
14
* If you have any questions regarding your application, please call FAAC’s technical department at 1-866-925-3222 or 1-800-221-8278.
Model Package Includes Shipping Wt Part Number Price
390 Arm Articulated replacement arm 4 lbs. 738705 $258
Kit w/E024U Board
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:10 AM Page 14
Visit us online atwww.faacusa.com
15
Low Voltage
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:10 AM Page 15
FAAC operators for swinging gates are amongthe safest available. The anti-entrapment andsafety provided by all gate operators can andshould be improved with photocells, loopdetectors, sensing edges and/or other similar
devices. FAAC strongly recommends thatdevices such as these be installed with allautomated gate systems.
To guarantee the safety and efficiency of itsequipment, FAAC strongly recommends thatqualified personnel test the safety system on anannual basis, as well as maintain the overallhydraulic or mechanical system.
Model 415
Mod
el 4
15
Electromechanical Swing Gate Operator
.Designed for residential use
. Two year limited warranty(see back cover)
16
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:10 AM Page 16
Model 415 Electromechanical Swing Gate Operator
Model 415
Model 415 dimensions
The Model 415 was designed to provide powerand versatility to an economical residential swingoperator. Features. Sleek design. Sealed limit switches
Specifications
Duty cycle
Maximum gate swing
90 degree opening time
Maximum weight per gate leaf
Maximum length per gate leaf
Approx. operating temperature range
Voltage
Power Consumption
Current Consumption
Effective Stroke
Protection class
100%110 degrees13 seconds700 pounds (317.5 kg)15 feet (4.6 m)-4°F to131°F (-20°C to 55°C)
Primary: 115 VAC
Secondary: 24vdc (100va transformer)
70 W3 A15 in. (38.1 cm)Nema 4x
NOTE: Operator specifications areapproximate. Environmental factorscan change the performance of the operator.
Batteries are for
emergency back-up
only; not needed to run
system
under normal conditions
.
Low Voltage
17
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:10 AM Page 17
Model 415 Electromechanical Swing Gate Operator
Model Package Includes Shipping Wt (approx) Voltage Part Number Price
415 Basic Single Kit w/ E024U Board Operator, E024U Control Board, 14x16 enclosure, power 58 lbs. (26.3kg) 24vdc 10441811.5E+ $1,900supply, and batteries
Model Package Includes Shipping Wt (approx) Voltage Part Number Price
415 Operator Only Use to make the single kit into a master/slave (bi-parting) kit; or use to order 25 lbs. (11.3 kg) 24vdc (Transformer) 10441811 $887replacement operator. Order necessary length needed for system of two wire cable part #2197 for power and two wire cable part #2192 for limit switch at no charge; up to 40 ft per system.
To make the above a master/slave (bi-parting) system use the following:
To complete your gate system installation, or for replacement purposes, the following peripherals can be ordered:
Model
Battery (7.2 amp hour)
Shipping Wt (approx)
6 lbs. (2.7 kg)
1 lbs. (.45 kg)
1 lbs. (.45 kg)
1 lbs. (.45 kg)
1 lbs. (.45 kg)
N/A
5 lbs. (2.3 kg)
2 lbs. (.9 kg)
Voltage
12vdc
24vdc
24vdc
Part Number
3540
1tm418ds
787317
785163
1rp418ds
2197
2114
63001385
Price
$66
$44
$51
$237
$77
3.00/ft
$122
$660
Description
Two batteries are needed (replacement only)
FAAC single button
FAAC two button
Directional with diagonal alignment; required for UL-325 compliance
FAAC single channel
For use with master or master/slave system; (included with basickit, see above)
24vdc; 100va (replacement only)
24vdc (replacement only)
Transmitter
Transmitter
Photobeam
Receiver
Two Wire cable
Transformer
425D Control Panel
18
* If you have any questions regarding your application, please call FAAC’s technical department at 1-866-925-3222 or 1-800-221-8278.
Transmitter 4 Channel transmitter XT 4433 RC 787453 $22
Receiver Receiver 433 RC Plug In 787741 $41
E024U Control Panel E024U 24vdc Replacement Board 2 lbs. (.9 kg) 24vdc 202025 $541
E024U Power Supply Switching Power Supply for E024U Board 2 lbs. (.9 kg) 750007 $156
E024U Loop Detector Rack E024U Loop Detector Interface (free exit, safety & 1 lb (.45 kg) 2670 $120shadow loop bases).
Kit w/E024U Board
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:10 AM Page 18
Visit us online atwww.faacusa.com
19
Low Voltage
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:10 AM Page 19
Model 770
Mod
el 7
70
FAAC operators for swinging gates are amongthe safest available. The anti-entrapment andsafety provided by all gate operators can andshould be improved with photocells, loop detectors, sensing edges and/or other similardevices. FAAC strongly recommends thatdevices such as these be installed with all automated gate systems.
To guarantee the safety and efficiency of itsequipment, FAAC strongly recommends thatqualified personnel test the safety system on anannual basis, as well as maintain the overallhydraulic or mechanical system.
In-ground Swing Gate Operator
.Designed for residential use
. Two year limited warranty(see back cover)
20
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:10 AM Page 20
Model 770 Electromechanical Swing Gate Operator
SpecificationsDuty cycleMaximum gate swing90 degree opening timeMaximum weight per gate leafMaximum length per gate leafApprox. operating temperature rangeVoltage
Power consumptionCurrent consumptionProtection class
100%110 degrees (140 or 180 degrees with optional kit)13 seconds1,100 pounds (500 kg)10 feet (3 m)-4°F to131°F (-20°C to 55°C)Primary: 115 VACSecondary: 24vdc (100va transformer)70 W3 ANema 4x
NOTE: Operator specifications areapproximate. Environmental factors canchange the performance of the operator.
Model 770 in-ground application
The Model 770 was designed for in-ground installation so asnot to detract from the appearance of the gate.
Features. Invisible installation . Minimized “pinch points” . Reverse on contact. Operates even in case of power failure (subject to battery condition). Slow down “soft stop”. Optional 140o or 180o opening kits available
21
Low Voltage
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:10 AM Page 21
Model 770 Electromechanical Swing Gate Operator
Model
770 Basic Single Kit
Shipping Wt(approx.)
98 lb. (44.5 kg)
Voltage
24vdc
Part Number
106753.5E+
Price
$2,586
Package IncludesOperator, support box, E024U C/P, Power Supply 14x16 in. enclosure, and batteries
Model770 Operator Only
Support Box
Shipping Wt(approx.)
24 lb. (10.9 kg)
36 lb (16.3 kg)
Voltage
24vdc(Transformer)
Part Number106753
490065
Price$1,012
$467
Package Includes
Use to make the single kit into a master/slave (bi-part-ing) kit; or use to order replacement operator. Order nec-essary length needed for system of two wire cable at nocharge; maximum 40 ft per system; part number is2197
Needed with operator for bi-parting system
To make the above a master/slave (bi-parting) system use the following:
To complete your gate system installation, or for replacement purposes, the following peripherals can be ordered:
Model Description Shipping Wt Voltage Part Number Price(approx.)
Battery (7.2 amp hour) Two batteries are needed (replacement only) 6 lbs. (2.7 kg 12vdc 3540 $66
Transmitter FAAC single button 1 lb. (.45 kg) 1tm418ds $44
Transmitter FAAC two button 1 lb. (.45 kg) 787317 $51
Photobeam Directional with diagonal alignment; required for UL-325 compliance 1 lb. (.45 kg) 785163 $237
Receiver FAAC single channel 1 lb. (.45 kg) 1RP418ds $77
Two Wire Cable 1 lb. (.45 kg) 2197 $3.00/ft
140 Degree Opening Kit Use to increase opening capacity to 140 degrees 390612 $187
180 Degree Opening Kit Use to increase opening capacity to 180 degrees 490111 $525
Positive Stop Kit (Open) Use for bolt on positive stop in the open position 2 lb. (.9 kg) 722121 $52
Positive Stop Kit (Closed) Use for bolt on positive stop in the closed position 2 lb. (.9 kg) 722122 $130
Transformer 24vdc; 100va (replacement only) 5 lb. (2.3 kg) 24vdc 2114 $122
425D Control Panel 24vdc (replacement only) 2 lb. (.9 kg) 24vdc 63001385 $660
Transmitter 4 Channel transmitter XT 4433 RC 787453 $22Receiver Receiver 433 RC Plug In 787741 $41
E024U Board 24vdc Replacement Board 2 lb. (.9 kg) 24vdc 202025 $541
E024U Power Supply Power Supply for E024U 2 lb. (.9 kg) 750007 $156
E024U Loop Detector Rack E024U Loop Detector Interface (free exit, safety & 1 lb (.45 kg) 2670 $120shadow loop bases).
22
* If you have any questions regarding your application, please call FAAC’s technical department at 1-866-925-3222 or 1-800-221-8278.
Kit w/E024U Board
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:10 AM Page 22
23
Pedestrian DoorOperator
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:10 AM Page 23
24
Model 950BM Automatic Swing Door Operator
Automated systems for leaf doors
Open and close in absolute silenceThe 950 automated systems command door opening andclosing in absolute operating silence, both in the spring version and in the motorized closing version
Versatile and elegantThe automated systems FAAC 950 BM (with spring closingsystem) can be installed both on the lintel and directly on thedoor’s structure. The housing covering the automated system can be suppliedin anodized extruded aluminium or in shaped ABS in an innovative design making it possible to fit a detection sensor(passive infrared) inside it.
Safe and intelligentThe automated system has two control boards:950 MPS (control board) and 950 I/O (input/output). A microprocessor controls all the door’s activities in real time,and an encoder detects its angular position at all times. Moreover, you select the operating logic (automatic, manual,night, open) by means of an integrated selector.Built in conformity with the new European safety regulations,and UL standards, speed and force are programmed accordingto the size of the door. If an obstacle is detected, the doorreopens immediately, and as it closes it verifies, at slowspeed, the release of the obstacle.
Powerful and reliableThanks to the accurate selection of the mechanical and electronic components, our 950 BM automated system is able to move leaves weighing over 660 lbs., on continuousduty, while always maintaining absolute operational safety.
FOR INDOOR USE ONLY
UL 325COMPLIANT
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:10 AM Page 24
25
Specifications
Power supplyAbsorbed powerUse frequencyDrive unitActivation
Anti-crushing deviceDimensionsWeightProtection classOpening angleOpening speedClosing speedPause timeStandard operating functionsActivation arms in stainless steel
Covering housing
115 VAC (+6% -10%) 60 Hz100 Wcontinuous24 Vdc motor with encoderelectromechanical with/without return springsupplied standard21” x 4” x 4 1/8” in (LxHxD)22 lbsIP 2370° - 95°adjustable from 30% to 100%adjustable from 30% al 100%adjustable from 1 to 30 sec.automatic-manual-openarticulated to pushwith short sliding blockwith standard sliding blockin abs or aluminium
Leaf length Leaf max weight (lbs) Leaf max weight (lbs) Leaf max weight (lbs)(in) Articulated arm to push Short sliding block arm Standard siding block arm
28 810 630 -30 705 550 -32 620 485 -34 550 - 43036 490 - 38038 440 - 34040 400 - 31042 360 - 28044 330 - 26046 300 - 24048 275 - 21550 255 - 20052 240 - 18554 220 - 17056 205 - 160
Standard Functions. Function logics: AUTOMATIC - MANUAL - OPEN. Self learning of open and closed positions and
measurement of door weight. Anti-crushing safety device active during opening
and closing. “PUSH and GO” function can be selected
(Commands opening by a simple push on the door. “ANTI-WIND” function can be selected (Guarantees
the resistance of the door during closure even in astrong wind)
. Closing thrust to guarantee door closure even in astrong wind
. AVS (Anti Vandal System) function: this device protects the motor if leaf movement is forced
. Manual operation in case of an electrical power cut.
. Adjustment trimmer for: motor traction force, openingspeed, closing speed, and pause time
. Facility for: microwave radar, passive infrared sensor,command pushbuttons, photocells, electric locks,bolt, KP Controller programming unit.
If you use the KP Controller programming unit, coupledto the programming display, you obtain the followingfunctions:. Function Logics:
AUTOMATIC - MANUAL - OPEN - ONE WAY -NIGHT
. Adjustment of opening and closing speed
. Pause time adjustment
. Opening width adjustment
. Interlock function
. Master-Slave Function for double leaf doors.
. Preset for acoustic and light transit signallers
. Self diagnosis.
1054481 - 950BM Swing Operator 115V - Aluminum Cover . . . . . . . . . $ 1,607
390693 - Articulated Arm - Push . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 193
390039 - Articulated Arm Version will be available Spring 2013 . . . . . $ 193
390695 - Sliding Arm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 193
390040 - Sliding Arm Version will be available Spring 2013 . . . . . . . . $ 193
790829 - KP Controller Programming Display . . . . . . . . . . . . . . . . . . . $ 137
790840 - KP Controller Programming Unit . . . . . . . . . . . . . . . . . . . . . . $ 289
NEW
NEW
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:10 AM Page 25
26
Visit us online atwww.faacusa.com
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:10 AM Page 26
27
Bollards
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:10 AM Page 27
M30 Crash Bollard
28
RISING TO THE CHALLENGE OF SECURITY VEHICLE ACCESS CONTROLNew solutions for security access control with J series bollard M30 class resistance. Activated by any access controlsystem or signaling device, it is an alternative solution to fixed posts, allowing traffic management into certain zonesby authorized vehicles only. J355HA-M30-P1 is the new FAAC retractable security bollard conceived for perimeterprotection applications.
The bollard has been successfully tested in accordance to “ASTM F 2656–07 - American Standard Test Method forVehicle Crash Testing of Perimeter Barriers” with the highest class P1 (less than 1 meter penetration).
The above class resistance is defined as 656.000 joules energy adsorbed; 15,000 lbs (6800 Kg) truck with a speed ofabout 30 Mph (50 km/h).
The J355HA-M30-P1 is an all in one bollard with a built-in hydraulic drive unit optimizing the space required to install abollard without the need for external pumps and pipes.
The J355HA-M30-P1 is the solution to increase the security of perimeter protection.
The bollard can be used for a variety of applications to allow access to a sensitive area in need of extreme protectionsuch as: airports, embassies, consulates, public offices, banks, marina’s.. Concrete with 10-30 aggregate according to UNI
The J 355 bollard guarantees free pedestrian flow, but provides security in avoidingvehicle intrusion with the following advantages:• Limited environmental impact because of its mobile concealed element.• Ensures greater protection of sensitive areas.• Allows access to authorized vehicles only.• Reduces and optimizes the use of human resources in access control activities.• Bollard movement is signaled by built-in led’s lights.• A full range of accessories is available.
INNOVATIVE SECURITY BOLLARD• The J Series security bollard J355HA-M30-P1 has a number of exceptional features. The bollard has been tested inaccordance to ASTM F 2656-07 M30 standards and achieved the highest penetration rating “P1”.• All in one: bollard has a built-in hydraulic drive unit to avoid loss of power from underground pipes.• No pipes with oil under pressure on underground ducts to avoid leakages or failure risks.• Suitable duty cycle that allows the use in heavy traffic conditions.• Emergency Fast Operation circuit (option) for rapid up-rise possible in 1.5 seconds (optional).• Fail-secure position in case of power failure by hydraulic blocking.• Steel cylinder, thickness 16 mm treated with cataphoresis and painted.• Cylinder slides on central rail piston to provide optimal stability when raising and lowering the bollard.• Built-in LED light grants visibility in all directions.• Junction boxes and connectors are IP 66 rated.• Stainless steel internal fixing frames.• Control board: extremely reliable electronic unit able to manage one bollard.• No special cables are required.
Accessories for automatic version• Bollard pit JP355 (included with bollard)• Pit heater JH355 (optional)• Control unit for managing one bollard.
Options for automatic version• RAL painting on request (not avalaible on stainless steel)• Stainless steel satin finishing• E.F.O. Emergency Fast Operation for faster raising of the bollard.
NEW
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:10 AM Page 28
Pit is made of steel sheet alloy, thickness e 2mm and frame to be welled in. Main frame is ductile casted iron GS400, treated with cataphoresis.
Reinforcing steel bars of the foundation (they are common steel bars and wire mesh for construction work to besourced locally), allows to bollard and its pit, the requested class resistance to comply with the ASTM standards: M30.
M30 Crash Bollard
29
Specifications
Drive By hydraulic unitCylinder stroke 39 in. (1000 mm)Cylinder diameter 14 in. (355 mm)Cylinder steel sheet thickness 5/8 in. (16 mm)Cylinder built-in reinforcement disks n.4 of 3/8 in. (10 mm) thicknessCylinder material standard release S355JR EN10210Cylinder surface treatment Cataphoresis and polyester powder paintedColour Dark grey metalized aluminum RAL 7021Head surface treatment Anticorodal case aluminum RAL 9006Rising time About 6,0 secRising time with E.F.O. About 1,5 secDescent time About 2,0 secHydraulic drive unit power supply 230 Vac + 6% - 10%; 50/60 HzPower consumption 800 WBollard class protection IP 66Work frequency Heavy dutyReflective strip standard height 2 ¼ in. (55 mm)Impact resistance 150 kJoulesBreak in resistance 656 kJoules in accordance to ASTM - M30Walled in pit with square profile L 23 in. x L23 in. x 59 in. (569 x D569 x H1500 mm)Max cable length 164 ft (50 mt.)Operating temperature +5 F to 131 F (-15 °C / +55 °C)3.
Part Number Description 2013 Price116002 J355 HA M30 H1.000 Painted Steel $24,900116032 J355 HA M30 H1.000 Satin finish stainless Steel $27,900116003 J355 HA M30 H1.000 EFO Painted Steel $29,900116033 J355 HA M30 H1.000 EFO Satin finish stainless Steel $32,900
All these part numbers and gross Prices also include the pit.
The only accessory required to complete the installation is the standard control unit for bollard applications.
Part Number Description 2013 Price116300 Bollard Control Unit JE275 $665
Please Note that, for M30 bollard applications, each control unit can control 1 single bollard
J355 M30 Perimeter Protection Security Bollard range:
Accessories:
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:10 AM Page 29
J275 Semi-Automatic
30
DISAPPEARING TRAFFIC BOLLARD - Semi-AutomaticThis type of bollard is recommeneded in cases when accessed are limit-ed, or when used together with the automatic version. This bollard solvestransit/stopping problems with requiring electricity. With its single-effect,gas-powered spring, raising is done automatically by key release andlowering is done by applying slight pressure with the foot to the head ofthe bollard.
AVAILABLE VERSIONS
PAINTED STEEL STANDARD VERSIONS• J 275/600 SA painted steel
- steel cylinder 7 mm thickness treated by cataphoresis and painted- powder painted dark grey metallised RAL 7021
STAINLESS STEEL AISI 316 SPECIAL VERSIONS• J 275/600 SA stainless steel
- stainless steel cylinder 7 mm thickness satin finished
Technical SpecificationsMovement Single effect gas springCylinder stroke 600 mmCylinder diameter 275 mmCylinder material standard release Steel Fe 360Cylinder material special release AISI 316 satin finishstainless steelCylinder surface treatment Cataphoresis plus polyester powder painted
dark grey metallised RAL 7021Head surface treatment Anticorodal case aluminium RAL 9006Rising Key release: automatic rising with single effect gas springLowering Key release: by applying pressure on the cylindeer topReflective strip Standard height 2 1/4in. (55 mm)Impact resistance 38,000 Joules/painted steel - 67,000 Joules/stainless steelBreak in resistance 128,000 Joules/painted steel - 207,000 Joules/stainless steelWalled in pit with cylinder profile 560 x 560 x 950 mm
Part Number Description 2013 Price116050 Bollard 275H600 Semi-automatic - painted steel $6,500116060 Bollard 275H600 Semi-automatic - stainless steel $8,100
Part Number Description 2013 Price116100 Bollard Pit JP 275/600 $1,178116201 Pit Cover JC 275 $32139008 Release keys kit (5 pcs) $160
Accessories:
Bollard pit 116100 and bollard cover 116201, are the same for automatic bollard J 275 HA
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:10 AM Page 30
J275 Fixed Version
31
TRAFFIC BOLLARD - Fixed
The fixed bollard is suitable for installations when all bollards don’tneed to be automated, the fixed bollards can maintain aestheticappearances for sites, thus reducing costs and time of installation.
AVAILABLE VERSIONS
PAINTED STEEL STANDARD VERSIONS
• J 275/600 F painted steel- steel cylinder 3/16in. (4 mm) thickness treated by cataphoresis and painted- powder painted dark grey metallised RAL 7021
• J 275/800 F painted steel- steel cylinder 3/16in. (4 mm) thickness treated by cataphoresis and painted- powder painted dark grey metallised RAL 7021
STAINLESS STEEL AISI 316 SPECIAL VERSIONS
• J 275/600 F satin finish stainless steel AISI 316- stainless steel cylinder 1/8in. (3 mm) thickness satin finished
• J 275/800 F satin finish stainless steel AISI 316- stainless steel cylinder 1/8in. (3 mm) thickness satin finished
Technical Specifications J275/600 F J275/800 FCylinder height 24in. (600 mm) 32in. (800 mm)Cylinder diameter 11in. (275 mm)Cylinder material Steel Fe 360Cylinder material special release AISI 316 satin finishstainless steelCylinder surface treatment Cataphoresis plus polyester powder painted
dark grey metallised RAL 7021Head surface treatment Anticorodal case aluminium RAL 9006Reflective strip Standard height 2 1/4in. (55 mm)Break in resistance 35,000 Joules/painted steel
59,000 Joules/stainless steelWalled in pit 450 x 450 x 30 mm
Part Number Description 2013 Price116020 Fixed Bollard J275/600 Painted Steel $1,700116021 Fixed Bollard J275/800 Painted Steel $1,800116040 Fixed Bollard J275/600 Painted Steel $2,600116041 Fixed Bollard J275/800 Painted Steel $2,850
Part Number Description 2013 Price116120 Fixed Bollard Pit JPF $350
Accessories:
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:10 AM Page 31
32
J Series BollardsThe J Series bollard represents a new generation access control solution. Many design innovations make it easy to handle and install but best of all its performance is market leading and lifetime costs exceptionally competitive. Activated by any access control system or signalling device, it is an alternativesolution to fixed posts and barriers, allowing regulation of traffic into certain zones with high vehicle flow, (e.g. restricted areas, pedestrian areas, parking andindustrial sites and many more). Available with a diameter of 11in. (275mm), and a height of 24in. (600mm) or 32in. (800mm).
J 275 Bollard guarantees free pedestrian flow, but manages vehicle traffic orlimited parking, with the following advantages:. Does not disfigure the characteristics of the environment because of its
mobile concealed element with minimal environmental impact. Ensures greater protection of pedestrian areas in the town center. Allows access to authorized vehicles only. Reduces and optimises the use of human resources in access control activities. Customizable color selection for blending in with the urban context. Activity can be signalled by built-in buzzer and led outer ring, according to
its position. A full range of accessories is available. Its function is to deter
Truly Innovative and Unique BollardThe J Series has a number of exceptional features.The bollard was designed and tested in order to optimise installation, servicingand maintenance activities whilst maintaining maximum reliability over its lifetime.. New drive concept-the drive unit is mounted in the moving cylinder. High resistance steel structure. Fast moving cylinder. “Fully optional” version including all main accessories. Lowered maintenance costs, due to one man servicing.. Flexible control unit that manages up to 4 bollards. Possible replacement of first generation FAAC city bollards. Cylindrical shaped metal sheets make up the foundation box, enabling
easy handling
12 Reasons to explain the Uniqueness of J 275 Bollard. Mobile drive unit, extractable by a handle for ease of replacement or maintenance. Cylinder slides on double rail to provide better stability in raising and lowering. No pipes with oil under pressure to avoid risk of failure's risks. Built-in illuminated outer ring powered by central led and acoustic buzzer. Built-in emergency release in case of power failure. Built-in mechanical release to lower the cylinder in any circumstances. Cylinder available in stainless steel AISI 316. Internal fixing frames made of stainless steel. Connectors and junction boxes, with IP 67 certification. Round-section pit to optimize digging works. Pit supplied in a kit to minimize transport charges and packaging dimensions. JE 275 control board able to manage up to four bollards
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:10 AM Page 32
33
Technical Specifications J275/600 HA J275/800 HA
Drive HydraulicCylinder stroke 24in. (600mm) 32in. (800mm)Cylinder diameter 11in. (275mm)Cylinder material standard release Steel Fe360Cylinder material special AIS1316release stainless steel
Cylinder surface treatment Cataphoresis and polyester powder painted dark grey metallised RAL 7021
Head surface treatment Anticorodal case aluminium RAL 9006 Rising time About 5,0 sec. About 7 sec Descent time (standard) About 2,8 sec About 3,5 sec Descent time (rapid) (*) 1 sec 1,2 sec Hydraulic drive unit Power supply 230 VAC +6% -10%; 50 HzPower consumption 220WProtection class IP 67Work frequency Heavy duty Reflective strip Standard height 21/4in. (55 mm) Manual lowering operation Simple hydraulic release keyImpact resistance 38.000 Joules Break in resistance 120.000 Joules
Walled in pit with cylinder profile 23x23x38in. 23x23x48in.560x560x950 mm 560x560x1220 mm
Cable to link bollard to control unit FG70R-0,6/1Kv-16G-1,5(not supplied)Max cable length 165 ft. (50 mt)Environment temperature 0°Fto135°F -15/+55°C
Traffic Bollard-HydraulicThe J275 automatic concealed traffic bollard hasfully integrated hydraulic technology for heavy duty usage. With a standard descent time of 2.8 seconds, there is an extra setting that activates the emergency release valve and allows a descent time of just 1 second. Even the basic bollard in the range comes with flashing lights, buzzer, emergency release and mechanical release.
Painted Steel Standard VersionsJ 275/600 HA painted steel Part Number 116000 Price $8,677. steel cylinder 5/16 in. (7 mm) thickness treated by cataphoresis and painted. powder painted dark grey metallic RAL 7021 . Illuminated outer ring powered by central LED. buzzer . emergency release in case of power failure (failure safe or secure)J 275/800 HA painted steel Part Number 116001 Price $9,212. steel cylinder 5/16in. (7 mm) thickness treated by cataphoresis and painted. powder painted dark grey metallic RAL7021 . Illuminated outer ring powered by central LED. buzzer . emergency release in case of power failure (failure safe or secure)Stainless Steel AISI 316 Special VersionsJ 275/600 HA satin finish stainless steel AISI 316 Part Number 116030 Price $10,659. stainless steel cylinder 1/4in.
(6 mm) thickness satin finished . Illuminated outer ring powered by central LED. buzzer . emergency release in case of power failure (failure safe or secure)J 275/800 HA satin finish stainless steel AISI 316 Part Number 116031 Price $11,516. stainless steel cylinder 1/4in.
(6 mm) thickness satin finished . Illuminated outer ring powered by central LED. buzzer . emergency release in case of power failure (failure safe or secure)Accessories for Automatic Version. Pit heater JH 275 (to extend operation up to -15°F) Part Number 116200 $761. Pit cover JC 275 Part Number 116201 $321. Control unit JE 275 (up to max n. 4 bollards) Part Number 116300 $665. Pit bollard JP 275/600 Part Number 116100 $1,178. Pit bollard JP 275/800 with extension Part Number 116100+116101 $1,393
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:10 AM Page 33
34
Visit us online atwww.faacusa.com
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:10 AM Page 34
35
Pad Mount Series
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:10 AM Page 35
36
Pad Mount Series
FSL700 24VDC Commercial Slide Gate OperatorFSW900 24VDC Commercial Swing Gate Operator
24VDC Commercial Gate Operators:Easy installation, Full Feature,Built-in battery backup system. Operates vehicular gates for high traffic and residential applications
and is ideal for custom homes, apartments, self storage, and othercommercial applications.
. Multi-Function battery backup is a standard feature built-in and offersmain power fail and low battery control of the gate during a powerfailure.
. The 24VDC direct drive motor to gearbox design offers high powerefficiency while reducing costs and added parts.
. Built in soft start soft stop control offers a smooth, more quiet operation and is easier on the gate and gate installation.
. Simple to install design offers mulitple prewired terminals, LED indicators, installation handles, accessory shelves, and is easy toaccess and set limits.
. Wireless master slave is simple to install and eliminates the need for underground wire.
Operator Features. Built-in battery backup standard. Soft Start Soft Stop smooth operation. Heavy duty gearbox and 24VDC motor direct drive design. Simple, clean design with less moving parts. Fail safe design with tamper detect feature on FSL700 slide
gate operator. Release handle with optional padlock on FSW900 swing
gate operator. Zinc galvanized steel frame with handles for easy installation. FSW900’s claim shell cover can be removed without removing swing
arm. FSL700 uses a UV protected polyethelene cover with lift
handle slots. Easy access limits are simple to set. Battery & accessory shelves. Adjustable chain idlers for front, rear, and post mount slide gates. Industry standard swing arm for swing gate applications. Plug-in loop detector inputs: reverse, open, center (shadow). (2) AC accessory power plugs. Built-in 3-Button control for easy setup. Multiple terminal inputs for simple, clean wire installation. Maglock, solenoid, external alarm outputs. Power fail option can open or cycle gate. Low battery option can open or cycle gate. Anti-Tailgate & Quick Close features standard. Wireless master slave option
NEW
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:10 AM Page 36
37
General
Power inputMotor PowerPower input fuseAccessory fuseAC accessory outletsAccessory power outputM/S wire
120 VAC, 15A24 VDC500 W, 1/2 HP4 amp SLB5 amp FB224DCRS432, CAT5 wire
General
GearboxChain Size Chain height - front mountChain mount optionsTravel speedGate capacityShipping weightDimensions
15:1 Fail Safe#41, 25ft11” from baseFront, rear, center12 inches/sec1000 lbs, 40 feet125 lbs22” H, 18” W, 15” D
FSL700 Slide Gate Operator General
GearboxArm type Arm attachment heightMounting methodTravel speedGate capacityShipping weightDimensions
900:1 Fail SecureIndustry standard17” from basePad or baseplate90 degrees in 15 sec800 lbs, 18 feet150 lbs18” H, 18.5” W, 23.5” D
FSW900 Swing Gate Operator
Wireless Master Slave Option
Built-in Battery Backup
Heavy duty gearbox withdirect motor drive
Simple design with easy to set limits
Dimensions and Technical Characteristics
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:10 AM Page 37
38
Simple and full featured entry and access control for residential and commercial applicationsAccess control devices for simple to complex applications are ideal for customhomes, apartments, gated communities, self storage, and other commercial applications.Full access control with computer monitoring is avialable through a high powertelephone access system that can communicate with residents and maintain card control.Simple access control using digital locks, key lock boxes, and fire boxes are ideal for residential or low traffic applications.
Telephone Entry System Features and Specifications. Large 4-Line LCD provides easy-to-understand prompts for visitors and installers. Electronic directory with up to 3000 resident capacity. PC programmble via modem, ethernet connection, or RS485. User Function Keys for simple visitor operation. Multi-Language option allows visitors to select between English, Spanish, or
French for user instructions. Stand alone system or integrates with an access control system. Wiegand input for slave card reader/keypad options. Wiegand interface supports third party access control systems. 4000 event transaction tracking with live transaction monitoring. Alarm notifications can be sent to a pager or programming computer in the
case of system trouble or tampering. Supervised battery backup ensures continuous operation. Optional covert video camera for resident convenience. Two programmable Welcome Screens available. Attractive vandal and weather resistant metal enclosure. Metal keypad with ADA compliant features including audible and visual
confirmation of user actions. Built-in postal lock provision for optional postal lock kit. Capacity: up to 3000 residents (Two phone numbers per resident available). Resident numbers may be stored without showing on directory. Telephone Number Length: up to 24 digits. Programmable Entry Codes: 1 - 6 digits. Vendor and Flash code for limited usage. Multipe Unit Capacity: Up to 10 units may share 1 phone line. Built-in time zone and holiday schedules via program software. Telephone Line: Touch-Tone or Rotary. (3) Form C controlled output relays. (4) Monitored inputs, single end-of-line (EOL), double EOL, and
without EOL. Communication Ports: Ethernet 10/100 Base-T with RJ-45, RS-485,
and international telephone line interface. DC Auxillary Output: 12VDC, 500 mA. Lock Output: 12VDC, 500 mA. Reader Power Output: 5VDC, 250mA and 12VDC, 500mA. Power Input: 16 VAC, 40va. Dimensions: 11.5” High, 14.75” Wide, 3.9” Deep
General
Backlit metal keypadLCD for programming Two full function relaysStrikes lockout featureBlock programming optionAuxiliary open inputRelay status displayRugged steel housing
DL1000 Digital Lock Box
Capacity: 1000 codesEntry code length: 4-6Number of Relays: 2Relay output: NO,NC,CMounting holes: 3” x 3”Conduit knockout: 3/4”Power: 12-24AC/DC6 5/8”H,4 5/8”W,4 1/4D
TAS 3000 Telephone Entry System
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:10 AM Page 38
39
General
Universal designAccepts Knox LocksUtilizes padlocksVandal resistant housingHigh visibility red paintHinged, lockable doorBuilt-in microswitchMulitple conduit knockouts
Number of relays: 1Relay output: NO,NC,CMounting holes: 3” x 3”Conduit knockout: 3/4”Power: None6 5/8”H,4 5/8”W,4 1/4D
FLB100 Fire Lock Box General
EKB100: Mortise Lock
EKB200: Switch Lock
EKB300: Ace Lock
Rugged steel housingBuilt-in hood & light
Output: MomentaryKey style: House keyOutput Momentary, HOKey style: cam keyOutput: Momentary, HOKey style: Tubular
6 5/8”H,4 5/8”W,4 1/4D
EntryKey Lock Box Series General
GNS100
GNS200
2” x 2” Square tubeSurface & subsurface
2” x 3.75” oval tubeSurface
Gooseneck Mounting Posts
Simple Access ControlDevices:
DL1000 Digital Lock. 1000 code capacity. Backlit metal keypad and LCD. Full function dual relays. Flash codes & time zone input
FLB100 Fire Lock Box. Universal design fits Knox Locks
and/or padlocks. Lockable hinged door. Vandal resistant steel housing. Fire red paint for high visibility
EntryKey Lock Box Series. Mortise, ace, and switch locks. Hold open or momentary. Vandal resistant steel housing. Built-in hood with lighting
Gooseneck Mounting Posts. 2” x 2” accessory posts. 2” x 3.75” residential posts. 4” x 4” commercial posts. Powder coat painted black
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:10 AM Page 39
40
DC GATE OPERATORS
DURASLIDE FSL700
. 1/2 HP DC Motor, BBU Included
. 1000 lb, 40 ft Commercial Capacity
Part Dealer Builder FSL700 $ 1125 $ 2340
DURASWING FSW900
. 1/2 HP DC Motor, BBU Included
. 800 lb, 18 ft Commercial Capacity
Part Dealer Builder FSW900 $ 1295 $ 2694
M/S MODULE WMS100
. Wireless Master Slave Module
. Eliminates Underground Wiring
Part Dealer Builder WMS100 $ 185 $ 385
WIRELESS M/S
COMMERCIAL
BASE P
GATE HARDWARE & ACCESSORIES
PLUG-IN PLD1500
. Plug-In Style Eliminates Wiring
. Works On FSL700 & FSW900
Part Dealer Builder PLD1500 $ 85 $ 177
LOOP DETECTORS
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:10 AM Page 40
41
TELEPHONE ENTRY SYSTEM
DIGITAL LOCKS & ACCESSORIES
TELEACCESS TAS3000
. 4-Line LCD Directory
. PC Programmable
Part Dealer Builder TAS3000-250 $1695 $3526 See Memory Upgrades for more capacity
COMMERCIAL
ACCESSORIES Part Dealer Builder TAS-FBox $195 $406 Flush mounting box & black trim
TAS-Heat $110 $229 Heater kit for installations below 32oF
TAS-MPlate $125 $260 Mounting Plate for gooseneck installation
TAS-Postal $88 $183 Postal Lock bracket with switch
RS485-USB $95 $198 RS485 USB Programmer
MEMORY UPGRADES Part Dealer Builder TAS3000-3000 $100 $208 Option for a maximum 3000 tenants total
TELEACCESS TAS3000 ACCESSORIES
DIGITALCODE DL1000
. LCD & Backlit Metal Keypad
. 1000 Entry Code Capacity
Part Dealer Builder DL1000 $ 185 $ 385
DIGITAL LOCK
FIRE BOX FLB100
. For Knox & Padlock Applications
Part Dealer Builder FLB100-Universal $ 45 $ 94
FIRE BOX
ENTRYKEY EKB200
. Uses Small Switch Lock Key
. Momentary & Hold Open/Latch
Part Dealer Builder EKB200 $ 95 $ 198
KEY LOCK BOXES
STANDARD GNS100
. 2� x 2�, Universal Mounting Plate
. Surface & SubSurface Styles
Part Dealer Builder GNS100 $ 65 $ 135
MEDIUM DUTY GNS200
. 2� x 3.75� Oval, Universal Plate
. Surface Mount With Baseplate
Part Dealer Builder GNS200 $ 125 $ 260
GOOSENECK MOUNTING POSTS
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:10 AM Page 41
42
Visit us online atwww.faacusa.com
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:10 AM Page 42
43
AC Gate Operators
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:10 AM Page 43
44
Gate System Safety Brochure . . . . . . . . 46Choosing the Correct Operator . . . . . . . 48Mounting Geometry. . . . . . . . . . . . . . . . . 52
Model 412 . . . . . . . . . . . . . . . . . . . . . . . . 55Model 415 . . . . . . . . . . . . . . . . . . . . . . . . 61Model 400 . . . . . . . . . . . . . . . . . . . . . . . . 68Model 402/422. . . . . . . . . . . . . . . . . . . . . 76Model 750 . . . . . . . . . . . . . . . . . . . . . . . . 84Model 760 . . . . . . . . . . . . . . . . . . . . . . . . 92
Contents
Con
vention
al
Swin
g Oper
ator
s
006 Pice List
UL Class 325 Descriptions & FAAC Operators
FAAC Models Duty Cycle Typical UseaResidentialvehicular gate operator
Commercial/General accessvehicular gateoperator
Industrial/Limited accessvehicular gateoperator
Restricted Accessvehicular gateoperator
400/402/412415/422/620640/750/760885
400/620/640885
400/620/640885
620/640/885
Limited duty
ContinuousDuty
ContinuousDuty
ContinuousDuty
• Home use• Small apartment building, up to 4 units per building, limited public access
• Apartment buildings• Open public access
• No public access
• Prison related security
Class
Class 1
Class 2
Class 3
Class 4
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:10 AM Page 44
45
Since 1965, FAAC has become an industry leader in the development and promotionof safer automated gate systems.
FAAC operators for swinging and sliding gates are among the safest available. Theanti-entrapment and security protection provided by all gate operators can and shouldimproved with photobeams, loop detectors, sensing edges and/or other similardevices. FAAC strongly recommends that devices such as those highlighted in thisbrochure be installed with all automated gate systems.
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:10 AM Page 45
46
1
18
8
5
5
3
Safety A Complete Swing Gate SystemDesigned with Safety in Mind
To guarantee the safety and efficiency of its equipment, FAAC also stronglyrecommends that qualified personnel perform an annual safety test on yourgate system, as well as maintain the overall hydraulic or mechanical system.
4
6
What is UL 325 and why is it important?
In order to prevent personal injuries associated with automated gate systems, United Laboratories (UL), along with several government-sponsored consumer safety organizations, developed what is called the UL 325 Standards for gate safety (much the same as has now been done with automatic garage door systems). These standards are meant to protect people, not vehicles, by providing at least two types of safety measures (primary and secondary) in the event a person becomes entrapped by the gate system. Consequently, every manufacturermust have their products tested at an approved laboratory to ensure that their safety measures work. For FAAC, our safety measures include a hydraulic bypass as primary and photobeams as secondary...and we've been providing these safety standards for more than 40 years!
FAAC will be happy to package your gate system so that it can be UL 325 compliant, right out of the box. For more information on additionalaccess control options, refer to the “ACCESSORIES CATALOG” section on the Home Page of our web site at www.faacusa.com.
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:11 AM Page 46
47
Gate OperatorThe swing gate operator(either gate-mounted or in-ground) automates the gate.
LoopsNormally used to activate traffic lights, In-ground loop detectors can also signal yourgate operator to open or close. Butremember, they are designed to protectvehicles only, not to protect pedestriansor individuals inside the fenced area.
PhotobeamsPhotobeams protect anythingthat “breaks” the beam (vehi-cles, pedestrians, animals and,especially, children) whichcauses a reversal of the gateoperators. Two sets of photo-beams are recommended forbest coverage.
Free ExitFor residential purposes, this in-ground loopor radio system automatically opens andcloses your gate system to allow guests orvisitors to exit your property without youhaving to do anything.
Gate-safe: During power outages, the hydraulic operator can be configured toallow the gate to be pushed open, permitting emergency access to your property.
Gate-secure: During power outages, your gate stays closed and locked.
Your gate system can also be set up to provide specialsafety options, including “Gate-safe” and “Gate-secure”configurations (refer also to #9 on this sheet).
Gate stops are required onall FAAC gate systems.Stops limit the extent ofgate travel and help pro-
tect the operator from damaging wearand tear. Stops can be fabricated and attached to the gate leaves, butdon’t look particularly attractive and can also create unsafe “pinchpoints.” These problems can be solved by installing gate stops that aretotally concealed inside the gate operator cover.
Warning LightA warning light will alert anyonenear the gate of its imminentmovement plus helps to illuminate the gate area.
Gate Stops (concealed)
Battery Back-upHaving a battery back-up unit aspart of your gate system providesthe peace of mind of knowing thatyour gate will continue to operateeven if the power goes out.
Control PanelThe “brain” of the gate system, the control panel is usuallyhoused in a fiberglass or metal, weather-resistant enclosurealong with other important access control devices. Forsecurity and safety, it is recommended that this enclosurebe lockable. Another recommended option is to install a“pre-wired” control system from the manufacturer thatprovides accurate, organized wiring which is extremelyhelpful in future troubleshooting or repairs.
Access Control OptionsA variety of access control devices are available, includingthese conventional options:• Keypad: provides multiple codes for different visitors suchas relatives, workers, regular deliveries, etc.• Keyswitch/card reader: simplified access control using aspecial key or coded plastic card.• Telephone entry: connects to existing phone line and fea-tures distinctive ring to alert you that someone is at thegate. Gates can be opened from the phone itself, and a“hold open” feature allows for gates to remain open forextended periods of time.• Radios: radio receiver plugs into control panel and trans-mitters are conveniently kept in vehicles or on key ring.
19
9
8
7
4
3
2
2Gate Safety System
76
5
GATE-SAFE
1GATE INSIDE
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:11 AM Page 47
48
Features/Operators 415 415-24V 402 422 400 400EG
Max leaf length (ft.) 15 15 10 10 16 18Max leaf length (ft.)w/ External Lock 15 15 10 10 23 23
Maximum Force Output 675 630 1550 1550 1740 1740
Duty (1) Medium Continuous Medium Medium Continuous Continuous
Use Frequency (Cycles per hour) 25 75 55 55 80 80
Power Supply (V) 115 24 115 or 230 115 or 230 115 or 230 115 or 230
Alternative PowerSupply Source
BC Pro 1050 24V SourcesBC Pro 1050(115V or 700i
(230V)
BC Pro 1050(115V or 700i
(230V)
BC Pro 1050(115V or 700i
(230V)
BC Pro 1050(115V or 700i
(230V)Battery (AC Power Failure) No Yes (Optional) No No No No
Anti-Crushing Protection Electronic Electronic Hydrolic By-Pass+Electronic
Hydrolic By-Pass+Electronic
Hydrolic By-Pass+Electronic
Hydrolic By-Pass+Electronic
End Travel Declaration Timed Self-Learning Timed Timed Timed Timed
Rod Effective Stroke (in.) 15 3/4 15 3/4 9 9 1/2 10 15Max Opening Angle
(Degrees) 110 110 90 100 110 125Forced Gate Resistance
(lbs. on 6’ leaf) 290 290 220 (2) 220 (2) 300 (2) 300 (2)
Built-In Mechanical StopsNo Stops Required(Limit Switches)
No Stops Required(Limit Switches)
Optional(Model - 80)
Optional(Model - 80)
Optional(Model - 84)
Optional(Model - 84)
Product Life Expectations(Cycles) 200,000 (4) 200,000 1,000,000 (5) 1,000,000 1,000,000 1,000,000
Transmission w/ Low-Temp
Grease
Transmission w/ Low-Temp
GreaseOil Bath
TransmissionOil Bath
TransmissionOil Bath
TransmissionOil Bath
Transmission
Cost (Single Basic Kit) $1,535.00 $1,827.00 $2,175.00 $2510.00 $2,731.00 $2,947.00
CHOOSING LINEAR STYLE SWING GATE OPERATORS
(1) LIGHT duty: Single residence application(1-2 Families) MEDIUM duty: Subdivision application (10-30 Families) CONTINUOUS duty: Apartmentcomplex applicaton (> 30 families) and industrial, public and commercial applications. (2) The hydraulic operators do not undergo permanent damages (repairable) (3) About 10 years at 15 cycles/day (4) About 10 years at 55 cycles/day(5) About 10 years at 280 cycles/day
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:11 AM Page 48
49
Selecting the Correct Operator for the Application
THERE ARE FOUR “DECISIONS” THAT YOU NEED TO MAKE BEFORESELECTING A GATE OPERATOR.
DECISION #1:WHICH DIRECTION TO SWING THE GATE?
FAAC gate mounted and in-ground operators can swing gates either inward or outward. Gatemounted operators can be kept inside the property, while the direction of gate swing is best fortraffic flow. In-ground operators are mounted beneath the gates. These options reduce opportu-nities for vandalism and improve appearance.
Inward Swing (gate mounted operator)
Outward Swing (gate mounted operator)
House
Street
FAAC offers many different models of swing gate operators. Models are designed to fit certain applications.
The following pages provide background information to help you select the best operator for your application.
* If you have any questions regarding your application, please call FAAC’s technical department at 1-800-221-8278.
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:11 AM Page 49
50
Drive
DECISION #3:SPEED AND LEAF LENGTH
Some thought should be given to the speed at which the gate will travel. The longer the gate leaf,the faster the traveling edge must move to clear an area in a given amount of time.
A speed of 40 feet/minute (12.2 meters/minute) is a “bench mark” velocity. It permits efficient operation while limiting the energy in the moving gate leaf. The lower the energy, the less chance of damage to property or injury topeople in the event of accidental contact with the moving gate.
Examples illustrating the relationship between operator speed, gate leaf length,
and the velocity of the leaf’s traveling edge
EXAMPLE:Velocity of the travelingedge of an 8 ft (2.4 m) leaf[in feet/m and (meters/m)]
126 fpm (38 mpm)63 fpm (19 mpm)50 fpm (15 mpm)44 fpm (14 mpm)33 fpm (10 mpm)
Speed options availablewith FAAC Operators (in seconds needed toswing a gate 90o)
6 sec. 12 sec.15 sec.17 sec.23 sec.
Longest leaf which can beused if the velocity of thetraveling edge is not toexceed 40 fpm (12.2 mpm)
2.5 ft (0.8 m)5 ft (1.5 m)6 ft (1.9 m)7.5 ft (2.3 m)10 ft (3 m)
DECISION #2:HOW MANY DEGREES OF SWING ARE REQUIRED?
. One FAAC gate operator (Model 750) can swing a gate up to 180o.. All other models of FAAC operators can swing a gate 90o to 148o.. Openings which require swings greater than 90o will need certain FAAC operator models.. The swing of an operator applies equally to inward or outward swinging gates.
All FAAC operators: Models 412, 402, 422,400, 750, 760
Models 412, 400, 750, 760. Models 400, 750, 760.
Models 400 EG (extended geometry),750, 760.
Models 750 (up to 180o), 760 (up to 148o with “soft stop”)
90o
140125
110 115o
Street
Drive Drive Drive
Drive
Street Street
Street Street
* If you have any questions regarding your application, please call FAAC’s technical department at 1-866-925-3222 or 1-800-221-8278.
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:11 AM Page 50
51
DECISION #4:WHAT TYPE OF MOUNTING GEOMETRY?
Decisions regarding mounting geometry apply to gate mounted operators: Models 412, 415, 402, 422 and 400.
As shown in the diagrams below, the operators must be mounted at an angle to the gate. Correct mounting geome-try assures that the desired degrees of swing are achieved, that the gate speed is correct, and that the operator andgate will operate properly and have a long life.
Example of a mounting for an inward swinging gate.
Sometimes a column must be notchedin order to accommodate the correct
mounting geometry.
Sometimes the mounting measurements willresult in a flush mounting
Example of a mounting for an outward swinging gate.
Note: If, in your installation, notching a column isnot practical, other solutions are available:1. Install operators using an outward swing.2. Upgrade to an operator with more mounting
flexibility.3. Use an in-ground operator (see Model 750
on page 55 or Model 760 on page 63).
Notched col-umn
1. 2.
3. 4.Special Situations
* If you have any questions regarding your application, please call FAAC’s technical department at 1-866-925-3222 or 1-800-221-8278.
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:11 AM Page 51
52
B
C
A D E
* For A and B, if you choose one of these values with one asterisk, then you must choose the other values with one asterisk; the values assume a column that measures less than 20” square.
** For A and B,, if you choose one of these values with two asterisk, then you must choose the other values with two asterisk; the values assume a column that measures less than 20” square.
* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or contact our technical department at 1-800-221-8278 or 1-866-925-3222.
Model 90° Swing 110° Swing 115° Swing 125° SwingA 5 in. (12.7 cm) – 4 in. (10 cm) –B 5 in. (12.7 cm) – 4.75 in. (12 cm) –C 28 in. (71.12 cm) – 28 in. (71.12 cm) –D not a constraint – not a constraint –A 7.875 in. (20 cm)* or 11 in. (29 cm)** – 5.75 in. (14.6 cm)** 4.75 in. (13 cm)B 7.5 in. (19 cm)* or 3 in. (7.5 cm)** – 7 in. (17.8 cm) 6.625 in. (17 cm)C 32.75 in. (83.19 cm) – 32.75 in. (93.19 cm) 32.75 in. (83.19 cm)D not a constraint – not a constraint not a constraintA 4.5 in. (11.4 cm) – – –B 4.5 in. (11.4 cm) – – –C 26.25 in. (66.68 cm) – – –D not a constraint – – –A 5.75 in. (14.5 cm) 4.875 in. (12.5 cm) – –B 5.75 in. (14.5 cm) 4.875 in. (12.5 cm) – –C 24 in. (60.96 cm) 24 in. (60.96 cm) – –D not a constraint not a constraint – –A 4.75 in. (12 cm) – – –B 4.75 in. (12 cm) – – –C 28.25 in. (71.45 cm) – – –D not a constraint – – –A 3.125 in. (7.94 cm) – – –B 3.125 in. (7.94 cm) – – –C 23.75 in. (60.33 cm) – – –D not a constraint – – –E Must be less than A
400 standard, high speed,
and slow speed models
400 EG (Extended Geometry)
402
412
422
422 VHS
All Models
Mounting GeometryOutward Swing
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:11 AM Page 52
53
B
C
EAD
Model 90° Swing 110° Swing 115° Swing 125° SwingA 5 in. (12.7 cm) – 4 in. (10 cm) –B 5 in. (12.7 cm) – 4.75 in. (12 cm) –C 38.1875 in. (71.12 cm) – 38.1875 in. (97 cm) –D up to 4 in. (10 cm) – up to 2 in. (5 cm) –A 7.875 in. (20 cm)* or 11.5 in. (29 cm)** – 5.75 in. (14.6 cm)** 4.75 in. (13 cm)B 7.5 in. (19 cm)* or 3 in. (7.5 cm)** – 7 in. (17.8 cm) 6.625 in. (17 cm)C 47.625 in. (121 cm) – 47.5 in. (120 cm) 47.5 in. (120 cm)D up to 5.25 in. (14 cm)* or 10 in. (25.5 cm)** – up to 3.5 in. (8.9 cm)** up to 2.875 in. (7 cm)A 4.5 in. (11.4 cm) – – –B 4.5 in. (11.4 cm) – – –C 35.5 in. (90.2 cm) – – –D 2 in. (5.1 cm)*** – – –A 5.75 in. (14.5 cm) 4.875 in. (12.5 cm) – –B 5.75 in. (14.5 cm) 4.875 in. (12.5 cm) – –C 36.25 in. (92.1 cm) 36.25 in. (92.1 cm) – –D up to 4 in. (10 cm) up to 3.125 in. (8 cm) – –A 4.75 in. (12 cm) – – –B 4.75 in. (12 cm) – – –C 36.25 in. (92.1 cm) – – –D up to 2 in. (5.1 cm)*** – – –A 3.125 in. (7.94 cm) – – –B 3.125 in. (7.94 cm) – – –C 30.25 in. (76.84 cm) – – –D up to 2 in. (5.1 cm)*** – – – E Must be less than A
400 standard, high speed,
and slow speed models
400 EG (Extended Geometry)
402
412
422
422 VHS
All Models* For A, B, and D, if you choose one of these values with one asterisk, then you must choose the other values with one asterisk; the
values assume a column that measures less than 20” square.** For A, B, and D, if you choose one of these values with two asterisk, then you must choose the other values with two asterisk; the
values assume a column that measures less than 20” square.*** If greater than this value, construct a recess liner.* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the
Installation Manual or contact our technical department at 1-800-221-8278 or 1-866-925-3222.
Mounting GeometryInward Swing
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:11 AM Page 53
54
Visit us online atwww.faacusa.com
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:11 AM Page 54
55
Model 412
Mod
el 4
12
FAAC operators for swinging gates are amongthe safest available. The anti-entrapment andsafety provided by all gate operators can andshould be improved with photocells, loop detectors, sensing edges and/or other similardevices. FAAC strongly recommends thatdevices such as these be installed with all automated gate systems.
To guarantee the safety and efficiency of itsequipment, FAAC strongly recommends thatqualified personnel test the safety system on anannual basis, as well as maintain the overallhydraulic or mechanical system.
Electromechanical Swing Gate Operator
. Designed for residential applications
. Two year limited warranty(see back cover)
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:11 AM Page 55
56
Model 412 Electromechanical Swing Gate Operator
. One 455 D control panel which operates single leaf or master/slave gates
. Choice of 6 operating modes including:- “pulse-to-open, pulse-to-close”- automatic timed closure- “man present” (separate open and
close contacts). 30 VDC power for accessories. 115 VAC
The Model 412’s electromechanical operation is ideal for residential applications.
The 412 is not recommended for use with solid gates or in highwind situations.
Model 412 HIGH VOLTAGE includes:
. Designed for light residential, single family use
. UL 325 compliant
. Mechanical locking in the opened and closed positions
. Easy interconnection of loop detectors, photocells, etc.to reverse a gate if an obstacle is sensed
. Easy interconnection of actuating devices like remote control radios, key pads and telephone entry systems
. On-board diagnostic LEDs
. Convenient manual release in case of power failure
* Measurements and weights stated in this Price List are approximate and subject to change withoutnotice. For exact specifications, please refer to the Installation Manual or contact our technical depart-ment at 1-800-221-8278 or 1-866-925-3222.
Parameter
Application
Cycles per hour
Maximum gate swing
90 degree opening time
Maximum weight per gate leaf
Maximum length per gate leaf
Approx. operating temperature range
Mechanical locking
Voltage
Model 412 Operating Specifications
Model 412 kit for bi-parting gates: major components (not to scale)
High Voltage
Single family residence, single leaf or bi-parting gate(vehicles only, not for pedestrian use) (not recommended for solid gates)
18
110 degrees
13 seconds
500 pounds, (226.8 kg)
14 feet (4.2 m)
-4oF to 131oF (-20oC to 55oC)
Available in opened and closed positions
115 VAC
39. 25 i n. ( 99. 8 cm)
23. 75 i n. ( 60. 2 cm)
3. 75 i n. ( 9. 5 cm)
3. 75 i n. ( 9. 5 cm)7. 5 i n. ( 19. 2 cm)
2. 36 i n. ( 6 cm)
11. 4 i n
( 29 cm)
Model 412
Note: Operator specifications are approximate. Environmental factorscan change the performance of the operator. Your installer will adviseyou which model of operator will work best for your site and application.
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:11 AM Page 56
57
Model 412 kit for Bi-Parting Gates
Model 412 DX KIT for Single Leaf RIGHT HINGED GATE
Model 412 SX KIT for Single Leaf LEFT HINGED GATE
Model 412 DX operator for Single Leaf RIGHT HINGED GATE
Model 412 SX operator for Single Leaf LEFT HINGED GATE
Model 412 Electromechanical Swing Gate Operator
Model Description Package Includes Shipping Voltage Part PriceWeight Number
115 VAC
115 VAC
115 VAC
115 VAC
115 VAC
115 VAC
50 lb (22.7 kg)
36 lb (16.3 kg)
36 lb (16.3 kg)
20 lb (9.1 kg)
20 lb (9.1 kg)
412BP1-R*
412BP1S-R+
412DX1-R*
412DX1S-R+
412SX1-R*
412SX1S-R+
104475
104476
$2,210
$2,471
1,564
1,993
1,564
1,993764
764
To complete your gate system, or for replacement purposes, the following accessories can be ordered:
OPTION 1:1 DX & SX operator & cover w/ mountng hardware455 D Control panel w/10 x 12 in. enclosure 1 radio receiver, 2 radio transmitters, 2 manual release keys,2 photobeam sets, 4 warning signsOPTION 2:Same options except 14 X 16 pre-wired enclosure
1 DX operator & cover 455 D Control panel w/10 x 12 in. enclosure & mounting hardware
1 radio receiver, 2 radio transmitters2 manual release keys, 2 photobeam sets2 warning signs w/14x16 prewired
1 SX operator & cover455 D Control panel w/10 x 12 in. enclosure & mounting hardware
1 radio receiver, 2 radio transmitters2 manual release keys, 2 photobeam sets2 warning signsw/14x16 prewired1 DX operator & cover
1 SX operator & cover
Model 455D control panel with 10x12 enclosureModel 412 operators require aModel 455 D control panel, whichcan operate a single leaf or master/slave gate system.
The 455D has the following functions and features:. Operates a single leaf or a
bi-parting gate. Provides opening and closing
"slow down, soft stop" convenience. Power supply: 115 VAC (+/- 10%)
or 230 VAC (+6% -10%) 50-60 HZ). Absorbed power: 10W. Motor max load: 800W. Accessories max load: .5 amp. Electric lock max load: 15 Va. Operating temperature: -78oF
to +131oF. Protection fuses: .800 mA (accessories)
5 amp (motors). Operating logics:A (automatic): signal to open, gate closes automatically after selected timed pauseS (security): similar to A logic, useful in reducing tailgatingE (semi-automatic): garage door-like operation; signal to open, signal to closeEP (semi-automatic): similar to E logic,but second signal stops gate, thirdsignal reverses gateB (manned, pulsed): designed forguard station use, requires 3-buttonswitch (pulsed) to open, close and stop gateC (manned, constant): similar to B logic, but 3-button switch requiresconstant pressure on each button
. Opening/closing time: 0 to 120 seconds (programmable)
. Pause time: 0 to 4 minutes (programmable)
. Closing leaf delay: 0 to 4 minutes (programmable)
. Opening leaf display: 2 seconds (can be disabled)
. Torque: adjustable from 0 to 50 levels
. On board programming via push button
. Easy interconnection of actuating and reversing devices
. Open/Hold open function
Accessory Description Shipping Voltage Part PriceWeight Number
Photobeam Directional with diagonal alignment; 2 lb (1 kg) 785163 $237required for UL-325 compliance.
Photobeam Mounting Post Foundation plate included 5 lb (2.2 kg) 401028/ 119Standard 737630*
Photobeam Mounting Post Foundation plate included 9 lb (4.1 kg) 401035/ 192Double 737630*
Photocell Set: also reguires 2 lb (1 kg) 785152 290Photocell Metal Housing or 3 lb (1.4 kg) 720089 43Photocell Plastic Housing 2 lb (1 kg) 720086 9
Receiver FAAC single channel 1 lb (.5 kg) 1RP418DS 77Transmitter FAAC single button 1 lb (.5 kg) 1TM418DS 44Transmitter FAAC two button 1 lb (.5 kg) 787317 51Antenna FAAC tuned antenna kit 2 lb (1 kg) 412003 85
Battery Backup BC Pro Single system backup 45 lb (16.8 kg) 115V 3520 1,753BC Pro Dual system backup 45 lb (16.8 kg) 115V 3522 1,988700i Single system backup 45 lb (16.8 kg) 230V 3521 1,753700i Dual system backup 45 lb (16.8 kg) 230V 3523 1,988
Control panel 455D (replacement only) 3 lb (1.4 kg) 115V 790919 709 230V 790926 709
455D w/ 14 x 16 infiberglass, 26 lb (11.8kg) 115V 455D115F* 1,188hinged, lockable enclosure 230V 455D220F* 1,18810x12 Enclosure w/ backplate 245
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:11 AM Page 57
58
Mounting Post Footprint
FAAC Model BC Pro 1050 and Model 700i battery back-up units
Model BC Pro 1050 battery back-up
Specifications BC Pro 1050 700i
Size: 14 x 16 x 6 in. (35.6 x 40.6 x 15.2 cm)Weight: 45 lbs. (16.8 kg)Input/Output voltage: 115 VAC 230 VACInput/Output frequency: 60 Hz 50/60 HzOutput VA: 1050 700Output watts: 680 450Recharge rate to 90%: 2-4 hours
Maximum surge current: 36,000 amps 160**AC suppression joule/amp ratings
Low volt switch to battery: 94 VAC 190 VACMax amp. draw: 5 amp. 3 amp.
Shipping Weight: 45 lbs. (16.8 kg)Part Number: 3520 3521Price: $1,753 $1,753
Dual Configuration:Dual System Part Number: 3522 3523Price 1,988 : $1,988
Model 412 Electromechanical Swing Gate Operator
FAAC Photobeam Systems
.Anodized aluminum
.Standard post: 22 in. high (57.5 cm)
.Double post (holds photobeam and control switch): 44 in. (111.5 cm)NOTE: Photobeam sets require 2 posts
Features:
Photobeam Photocell SetDesigned for wall mounting or for mountingin special extruded aluminum mountingposts.
.Directional photocell with diagonal alignment
.Angle of detection: +- 4 degrees
.Range: 100 ft (30 m)
.Obstacle detection time: 10 ms
.Housing protection IP 54
.Required power supply: 24-35 VDC (available on FAACcontrol panels)
.Output relay rating: 100 MA/24VDC
.Output relay: N.O. (Normally Opened) and N.C. (NormallyClosed).Receiver and Transmitter provide reliable all-weather sensing
Dimensions: 2.75 in. x 3.75 in. x 1.75 in. (7 cm x 9.5 cm x 4.5 cm)
Features:
* Measurements and weights stated in this Price List are approximate and subject to change withoutnotice. For exact specifications, please refer to the Installation Manual or contact our technical depart-ment at 1-800-221-8278 or 1-866-925-3222.
Ideal useage for the BC Pro and 700I battery backup systems: Fail safe(gates open during power outage and remain open until power is restored).Even if the power outage is prolonged and the batteries die, the gates willremain open to allow normal ingress and egress during the power outage.
Because the BC Pro and 700I battery backup systems run off the batteries,gate operation during a power outage is dependant upon the batteries beingwell conditioned and charged. If they are not, the voltage does not runthrough to the control panel being backed up. The battery backup systemdoes not shut down at all during a power outage, instead powering all periph-erals being backed up with our battery backup system. Thus, the moreperipherals used, the faster the batteries will die. Once the batteries do die,the gates will become inoperable and will stop at the position they were atwhen the batteries failed. Therefore, it is important to understand that the BCPro or 700I battery backup systems are not intended to work a Fail secure
Photobeam Mounting Posts (Standard and Double)Photobeam Mounting Post and FoundationPlate for Photobeam Set
401035737630*
401028737630*
3.54 in.(9 cm)
2.38 in.(5.8 cm)
2.38 in.
(5.8
cm)
2.75 in.(7 cm)
4.5 in.
(11.5
cm)
3.75 in.
(9.5
cm)
Photobeam Set
application (gates remain closed during power outage). Again,long term power outages could result in the batteries failing atsome point, possibly leaving the gates either partially or fully openor closed.
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:11 AM Page 58
59
FAAC Photocell Systems
Photocell Metal Housing
Model 412 Electromechanical Swing Gate Operator
Entry Sytem Devices
Photocell Plastic Housing
Photocell Plastic Housing Dimensions: 2.5 in. high x 2.25 in. wide x 2.75 in. deep(6.4 cm x 5.7 cm x7 cm)
Photocell Metal HousingPowder coated steel.Dimensions: 2.5 in. high x 2.5 in. wide x 2.75 in. deep(6.4 cm x 6.4 cm x7 cm)
Standard Photocell Set
Standard Photocell SetDimensions: 2.75 in. wide x 2.75 in. high x 4 in. deep (7cm x 7 cm x 10.2 cm)
Depth measurement includes housing.
The Standard Photocell Set requires the following addition-al equipment (priced separately):
Multi-Use Metal Housing, or Multi-Use Plastic Housing
Features:Required power supply: 19 - 34 VDC or 15 - 25 VAC (avail-able on FAAC control panels).
Output relay rating: 25 VAC, 0.1A
Output relay: N.O. (Normally Opened) and N.C. (Normally Closed)
Transmitter to receiver sensing provides reliable all-weathersensing
Range: 90 ft (27 m)
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:11 AM Page 59
60
Visit us online atwww.faacusa.com
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:11 AM Page 60
61
Model 415
Mod
el 4
15
FAAC operators for swinging gates areamong the safest available. The anti-entrap-ment and security protection provided by allgate operators can and should be improvedwith photocells, loop detectors, sensingedges and/or other similar devices. FAAC strongly recommends that devices such asthese be installed with all automated gatesystems.
To guarantee the safety and efficiency of itsequipment, FAAC strongly recommends thatqualified personnel test the safety system onan annual basis, as well as maintain theoverall hydraulic or mechanical system.
Electromechanical Swing Gate Operator
.Designed for residential applications
. Two year limited warranty(see back cover)
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:11 AM Page 61
62
UL 325COMPLIANT
CSI # 02820 -Gate Operators
Model 415
Model 415 dimensions
The Model 415 was designed to provide power and versatilityto an economical residential swing operator.
Features. Sleek design. Sealed limit switchesNOTE: If installation does not require electronic slowdown, the internal limit switches can be used as positive stops. If installation DOES require electronic slowdown, POSITIVE STOPS MUST BE USED IN PLACE OF LIMITS.
When adjusting limit switches, use a hand-held screwdriver, NOT A POWER SCREWDRIVER, as this can damage the limit switches.
. Operates even in case of power failure(with optional battery back-up and subject to battery condition)
. Reverse on contact
. Slow down “soft stop”
NOTE: Operator specifications are approximate. Environmental factors can change the performance of the operator.
Model 415 Electromechanical Swing Gate Operator
Specifications
Duty Cycle (cycles per hour) 25
Maximum Gate Swing 110 Degrees
90 Degree Opening Time 13 Seconds
Maximum Weight Per Gate Leaf 700 pounds (317.5 kg)
Maximum Length Per Gate Leaf 15 feet (4.6m)
Approximately Operating Temperature Range -4*F - 131*F (-20*C - 55*C)
Voltage 115 VAC
Power Consuption 300W
Current Consumption 2.5 A
Effective Stroke 15 in. (38.1cm)
Protection Class Nema 4x
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:11 AM Page 62
63
To complete your gate system, or for replacement purposes, the following accessories can be ordered:
Model
Model 415 Basic Single Kit
Shipping Wt(approx.)
46 lbs. (20.9 kg)
65 lb (29.5 kg)
Voltage
115 VAC
115 VAC
Part Number
1044182.5*
1044182.5L*
Price
$1,596
$2,020
Package Includes
Option #1Operator, 455D control panel, 10x12 in. enclosure
Option #2Operator, 455D control panel, 14x16 in. pre-wired enclosure
Model
415 Operator Only
Shipping Wt(approx.)
25 lbs. (11.3 kg)
Voltage
115 VAC
Part Number
1044182
Price
$887
Package Includes
Use to make the single kit into amaster/slave (bi-parting) kit; or use to order replacementoperator.
* Measurements and weights stated in this Price List are approximate and subject to change without notice. For exact specifications, please refer to the Installation Manual or contact our technical department at 1-800-221-8278 or 1-866-925-3222.
Model 455D control panel in 14x16 in. pre-wired enclosure
Option #2
Option #1
Model 455D control panel in 10x12 in. enclosure
Model 415 operators require a Model 455 D control panel,which can operate a singleleaf or master slave gate system.
Model 415 Electromechanical Swing Gate Operator
Accessory Description Shipping Voltage Part PriceWeight Number
Photobeam Directional with diagonal alignment; 2 lb (1 kg) 785163 $237required for UL-325 compliance.
Photobeam Mounting Post Foundation plate included 5 lb (2.2 kg) 401028/ 119Standard 737630*
Photobeam Mounting Post Foundation plate included 9 lb (4.1 kg) 401035/ 192Double 737630*
Photocell Set: also reguires 2 lb (1 kg) 785152 290Photocell Metal Housing or 3 lb (1.4 kg) 720089 43Photocell Plastic Housing 2 lb (1 kg) 720086 9
Receiver FAAC single channel 1 lb (.5 kg) 1RP418DS 77Transmitter FAAC single button 1 lb (.5 kg) 1TM418DS 42Transmitter FAAC two button 1 lb (.5 kg) 787317 51Antenna FAAC tuned antenna kit 2 lb (1 kg) 412003 85
Loop Detector DSP 15 1 lb (.5 kg) 2664 226Loop Detector DSP II; plugs in control panel backplate 1 lb (.5 kg) 2665 135Loop Detector DSP 10; plugs in control panel backplate 1 lb (.5 kg) 2667 148
& has sensitivity adjustment
Shadow Detector kit (DPS 11) Includes one detector, base, and 1 lb (.5 kg) 115V 2665.1* 203relay for shadow loop 230V 2665.2* 203
Shadow Detector kit (SP 10) Includes one detector, base, and 1 lb (.5 kg) 115V 2667.1* 214relay for shadow loop 230V 2667.2* 214
Mag Lock Relay Kit Includes base & relay for mag lock 24V ac 2352 48
Battery Backup BC Pro Single system backup 45 lb (16.8 kg) 115V 3520 1,753BC Pro Dual system backup 45 lb (16.8 kg) 115V 3522 1,988
Control panel 455D (replacement only) 3 lb (1.4 kg) 115V 790919 709 230V 790926 709
455D w/ 14 x 16 in fiberglass, 26 lb (11.8kg) 115V 455D115F* 1,188hinged, lockable enclosure 230V 455D220F* 1,188
Transmitter 4 Channel Transmitter XT4 433 RC 787453 22Receiver Receiver 433 RC Plug In 787741 41
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:11 AM Page 63
64
FAAC Model BC Pro 1050 and Model 700i battery back-up units
Model BC Pro 1050 battery back-up
Model 415 Electromechanical Swing Gate Operator
FAAC Photobeam SystemsPhotobeam Photocell SetDesigned for wall mounting or for mountingin special extruded aluminum mountingposts.
.Directional photocell with diagonal alignment
.Angle of detection: +- 4 degrees
.Range: 100 ft (30 m)
.Obstacle detection time: 10 ms
.Housing protection IP 54
.Required power supply: 24-35 VDC (available on FAACcontrol panels)
.Output relay rating: 100 MA/24VDC
.Output relay: N.O. (Normally Opened) and N.C. (Normally Closed)
.Receiver and Transmitter provide reliable all-weather sensing Dimensions: 2.75 in. x 3.75 in. x 1.75 in. (7 cm x 9.5 cm x 4.5 cm)
Features:
* Measurements and weights stated in this Price List are approximate and subject to change without notice. For exact specifications, please refer to the Installation Manual or contact our technical department at 1-800-221-8278 or 1-866-925-3222.
Ideal useage for the BC Pro and 700I battery backup systems: Fail safe(gates open during power outage and remain open until power is restored).Even if the power outage is prolonged and the batteries die, the gates willremain open to allow normal ingress and egress during the power outage.
Because the BC Pro and 700I battery backup systems run off the batteries,gate operation during a power outage is dependant upon the batteries beingwell conditioned and charged. If they are not, the voltage does not runthrough to the control panel being backed up. The battery backup systemdoes not shut down at all during a power outage, instead powering all periph-erals being backed up with our battery backup system. Thus, the moreperipherals used, the faster the batteries will die. Once the batteries do die,the gates will become inoperable and will stop at the position they were atwhen the batteries failed. Therefore, it is important to understand that the BCPro or 700I battery backup systems are not intended to work a Fail secure
Photobeam Set
application (gates remain closed during power outage). Again, long termpower outages could result in the batteries failing at some point, possiblyleaving the gates either partially or fully open or closed.
Specifications BC Pro 1050 700i
Size: 14 x 16 x 6 in. (35.6 x 40.6 x 15.2 cm)Weight: 45 lbs. (16.8 kg)Input/Output voltage: 115 VAC 230 VACInput/Output frequency: 60 Hz 50/60 HzOutput VA: 1050 700Output watts: 680 450Recharge rate to 90%: 2-4 hours
Maximum surge current: 36,000 amps 160**AC suppression joule/amp ratings
Low volt switch to battery: 94 VAC 190 VACMax amp. draw: 5 amp. 3 amp.
Shipping Weight: 45 lbs. (16.8 kg)Part Number: 3520 3521Price: $1,753 $1,753
Dual Configuration:Dual System Part Number: 3522 3523Price: $1,988 $1,988
Mounting Post Footprint
.Anodized aluminum
.Standard post: 22 in. high (57.5 cm)
.Double post (holds photobeam and control switch): 44 in. (111.5 cm)NOTE: Photobeam sets require 2 posts
Features:
Photobeam Mounting Posts (Standard and Double)Photobeam Mounting Post and FoundationPlate for Photobeam Set
401035737630*
401028737630*
3.54 in.(9 cm)
2.38 in.(5.8 cm)
2.38 in.
(5.8
cm)
2.75 in.(7 cm)
4.5 in.
(11.5
cm)
3.75 in.
(9.5
cm)
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:11 AM Page 64
65
Photocell Metal Housing
Entry Sytem Devices
Photocell Plastic Housing
Photocell Plastic Housing Dimensions: 2.5 in. high x 2.25 in. wide x 2.75 in. deep(6.4 cm x 5.7 cm x7 cm)
Photocell Metal HousingPowder coated steel.Dimensions: 2.5 in. high x 2.5 in. wide x 2.75 in. deep(6.4 cm x 6.4 cm x7 cm)
Standard Photocell Set
Standard Photocell SetDimensions: 2.75 in. wide x 2.75 in. high x 4 in. deep (7 cm x 7 cm x 10.2 cm)
Depth measurement includes housing.
The Standard Photocell Set requires the following additional equipment (priced separately):
Multi-Use Metal Housing, or Multi-Use Plastic Housing
Features:Required power supply: 19 - 34 VDC or 15 - 25 VAC (available on FAAC control panels).
Output relay rating: 25 VAC, 0.1A
Output relay: N.O. (Normally Opened) and N.C.(Normally Closed)
Transmitter to receiver sensing provides reliable all-weather sensing
Range: 90 ft (27 m)
FAAC Photocell Systems
Model 415 Electromechanical Swing Gate Operator
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:11 AM Page 65
66
Model 415 Electromechanical Swing Gate Operator
Model 455D control panel
Detail of control panel schematic
Model 455D control panelTo simplify understanding of the new detector layout, the Model 455 Dbackplate is shown here with control panel, outlet switch, test button andappropriate terminal strips. Also shown are the new "free exit" and "safe-ty" loop detector plug-in bases. These will come as diagramed with allenclosures.
The shadow loop detector can be added as an option. The shadow kit iscomprised of another base, detector, and relay. These items are shownin the diagram within the bold, broken line section with instructions below.
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:11 AM Page 66
67
Visit us online atwww.faacusa.com
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:11 AM Page 67
68
Model 400
Mod
el 4
00
FAAC operators for swinging gates are amongthe safest available. The anti-entrapment andsafety provided by all gate operators can andshould be improved with photocells, loop detectors, sensing edges and/or other similardevices. FAAC strongly recommends thatdevices such as these be installed with all automated gate systems.
To guarantee the safety and efficiency of itsequipment, FAAC strongly recommends thatqualified personnel test the safety system on anannual basis, as well as maintain the overallhydraulic or mechanical system.
Hydraulic Swing Gate Operator
.Designed for heavy duty applications
. Two year limited warranty(see back cover)
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:11 AM Page 68
69
Model 400 Hydraulic Swing Gate OperatorThe Model 400 heavy duty operator is designed specifically for situations needing maximum versatility such as apart-ment, subdivision, commercial/industrial and residentialapplications.
Definitions:
CBAC: hydraulic locking open & closed; normal swing speedCBA/CBC: hydraulic locking open/closed; normal swing speedSB: without hydraulic locking; normal swing speedSBS: without hydraulic locking; slower swing speed
. Adjustable hydraulic pressures to control force
. Minimized pinch points
. Available hydraulic locking of the gate available in open and/or closed position
. Quiet operation
. Self-lubricating for long life
. Maximum leaf length: 22 ft (6.7 m) - see chart below
. Maximum leaf weight: 2000 lb (907 kg) - see chart below
. Maximum cycles per hour: 80
. Two year warranty (see back cover) Model 400 manual release
Model 400
Model 400A B
4. 45 i n. ( 11. 3 cm)3. 35 i n. ( 8. 5 cm)
3. 35 i n. ( 8. 5 cm)
C
ABC
40.5 in. (103.1 cm) 27.5 in. (70 cm)10.25 in. (26 cm)
* Mounting dimensions, wind factor and gate design will affect performance specifications* Duty cycle is measured in an ambient temperature of 72 degrees F (20 degrees C) and 115 or 230 VAC. Variations in temperature and fluctuation of voltages will also affect duty cycle.* An electric or magnetic lock is recommended for any gate longer than 12 feet (3.7 m).
NOTE: To simplify ordering the right Model 400 that will work best for your application, you only need to answer one basic question: What is the maximum length of the gate leaf?
All models listed can be converted to CBAC, CBC, SB or SBS upon request.Positive Gate Stops, which limit gate travel, are required in the opened and closed positions, see page 32.
50.5 in. (128.5 cm)32.4 in. (82.2 cm)15 in. (38. cm)
Standard Extended Geometry (EG)
Operator LockingInward Swing Position Outward Swing PositionOpened Closed Opened Closed
Max. Max. Time to Max. Angle Cycles ShippingVersion Leaf Length Leaf Weight Travel 90° of Opening Per Hour WeightCBACR 400 12 ft (3.6 m) 900 lb (408 Kg) 12 sec 115° 80 29 lb (13.2 kg)CBAC 400 16 ft (4.9 m) 1300 lb (589.7 Kg) 17 sec 115° 80 29 lb (13.2 kg) • • • •CBAC 400 EG 18 ft (5.5 m) 1500 lb (680.4 Kg) 18 sec 125° 80 34 lb (15.4 kg) • • • •
SB 400 18 ft (5.5 m) 1600 lb (725.8 Kg) 17 sec 115° 80 29 lb (13.2 kg)SB 400 EG 20 ft (6.1 m) 1800 lb (816.5 Kg) 18 sec 125° 80 34 lb (15.4 kg)SBS 400 20 ft (6.1 m) 2000 lb (907.2 Kg 23 sec 115° 50 29 lb (13.2 kg)
NOTE: FAAC hydraulic operators are not recommended foruse on solid-faced gates which are subject to gusty and/orhigh wind situations. Solid-faced is defined as 50% or more ofthe gate being solid. If you still have questions regarding yourspecific installation, please contact our technical department at1-800-221-8278.
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:11 AM Page 69
70
Model 400 Hydraulic Swing Gate Operator
To make the above a master/slave (bi-parting) system, use the following:
400 CBAC Standard Basic Single Kit
400 CBACR Rapid Basic Single Kit
400 CBAC EG (long) Basic Single Kit
Model Description Package Includes Shipping Wt. Voltage Part No. Price115V230V
115V230V
115V230V
54 lb (24.5.kg)
54 lb (24.5.kg)
54 lb (24.5.kg)
29 lb (13.2 kg)
29 lb (13.2 kg)
34 lb (15.4 kg)
10420112.5*1042011.5*
10420712.5*1042071.5*
10420212.5*1042021.5*
$2,8402,840
2,9822,982
3,0653,065
400 CBAC Standard Operator only
400 CBACR Rapid Operator only
400 CBAC EG Operator Only
Use to make the single kitinto a master/slave, or use toorder replacement operator.
115V230V
115V230V115V230V
1042011251042011
1042071210420711042021251042021
$1,8501,850
1,9621,9622,0992,099
* Measurements and weights stated in this PriceList are approximate and subject to change with-out notice. For exact specifications, please referto the Installation Manual or contact our technical department at 1-800-221-8278 or 1-866-925-3222.
Model Description Package Includes Shipping Wt. Voltage Part No. Price
To complete your gate system, or for replacement purposes, the following accessories can be ordered:
400 CBAC operator, 455D control panel,pre-wired14x16 enclosure
400 CBACR operator, 455D control panel,pre-wired 14x16 enclosure
400 CBAC EG operator, 455D control panel,pre-wired 14x16 enclosure
Model 455D control panel
Model 400 operator requires aModel 455D control panel, whichcan operate a single leaf or masterslave gate system. The 455D hasa convenient reference diagram onthe inside cover.The 455 D has the following functions and features:. Operates a single leaf or a
bi-parting gate. Provides opening and closing
"slow down, soft stop" convenience. Power supply: 115 VAC (+/- 10%)
or 230 VAC (+6% -10%) 50-60 HZ). Absorbed power: 10W. Motor max load: 800W. Accessories max load: .5 amp. Electric lock max load: 15 Va. Operating temperature: -78oF
to +131oF. Protection fuses: .800 mA (accessories)
5 amp (motors). Operating logics:A (automatic): signal to open, gate closes automatically after selected timed pauseS (security): similar to A logic, useful in reducing tailgatingE (semi-automatic): garage door-like operation; signal to open, signal to closeEP (semi-automatic): similar to E logic,but second signal stops gate, thirdsignal reverses gateB (manned, pulsed): designed forguard station use, requires 3-buttonswitch (pulsed) to open, close and stop gateC (manned, constant): similar to B logic, but 3-button switch requiresconstant pressure on each button
. Opening/closing time: 0 to 120 seconds (programmable)
. Pause time: 0 to 4 minutes (programmable)
. Closing leaf delay: 0 to 4 minutes (programmable)
. Opening leaf display: 2 seconds (can be disabled)
. Torque: adjustable from 0 to 50 levels
. On board programming via push button
. Easy interconnection of actuating and reversing devices
. Open/Hold open function
Accessory Description Shipping Voltage Part PriceWeight Number
Photobeam Directional with diagonal alignment; 2 lb (1 kg) 785163 $237 Photobeam Mounting Foundation plate included 5 lb (2.2 kg) 401028/ 119Post: Standard 737630*
Photobeam Mounting Foundation plate included 9 lb (4.1 kg) 401035/ 192Post: Double 737630*
Photocell Set: also reguires 2 lb (1 kg) 785152 290Photocell Metal Housing or 3 lb (1.4 kg) 720089 43Photocell Plastic Housing 2 lb (1 kg) 720086 9
Receiver FAAC single channel 1 lb (.5 kg) 1RP418DS 77Transmitter FAAC single button 1 lb (.5 kg) 1TM418DS 44Transmitter FAAC two button 1 lb (.5 kg) 787317 51Antenna FAAC tuned antenna kit 2 lb (1 kg) 412003 85Loop Detector DSP 15 1 lb (.5 kg) 2664 226Loop Detector DSP II; plugs in control panel backplate 1 lb (.5 kg) 2665 135Loop Detector DSP 10; plugs in control panel backplate 1 lb (.5 kg) 2667 148
& has sensitivity adjustmentShadow Detector kit Includes one detector, base, and 1 lb (.5 kg) 115V 2665.1* 203relay for shadow loop 230V 2665.2* 203Shadow Detector kit (SP 10) Includes one detector, base, and 1 lb (.5 kg) 115V 2667.1* 214
relay for shadow loop 230V 2667.2* 214Mag Lock Relay Kit Includes base & relay for mag lock 24V ac 2352 48Positive Stop Mdl 84, 4-rod internal stop, 400 Std. 4 lb (1.8 kg) 490109 220
Mdl 84, 4-rod internal stop, 400 EG 4 lb (1.8 kg) 490043 220Battery Backup BC Pro Single system backup 45 lb (16.8 kg) 115V 3520 1,753
BC Pro Dual system backup 45 lb (16.8 kg) 115V 3522 1,988700i Single system backup 45 lb (16.8 kg) 230V 3521 1,753700i Dual system backup 45 lb (16.8 kg) 230V 3523 1,988BBU replacement board 115V 3233 1,165BBU replacement board 230V 3234 758
Control panel 455D (replacement only) 3 lb (1.4 kg) 115V 790919 709 230V 790926 709
455D w/ 14 x 16 in fiberglass, 26 lb (11.8kg) 115V 455D115F+ 1,188hinged, lockable enclosure 230V 455D220F* 1,188455D w/20x16 metal, 115V 455D115A* 1,422hinged enclosure 230V 455D230A* 1,422
Transmitter 4 Channel Transmitter 433 RC 787453 22Receiver Receiver 433 RC Plug In 787741 41
You can upgrade from our 14 X16 pre-wiredenclosure to our 20 X16 metal pre-wiredenclosure for only $250.00 gross more.
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:11 AM Page 70
71
FAAC Model BC Pro 1050 and Model 700i battery back-up units
Positive Stops (concealed)
Model BC Pro 1050 battery back-up
Stop-O-Matic Model 84
Model 400 Hydraulic Swing Gate Operator
. Stainless steel construction
. Does not compromise the integrity of the operator
. Mounts with existing FAAC hardware and does not require additional mounting points
. Model 84 is totally hidden under the operator cover
. Accommodates inward or outward swinging gates with no additional fabrication
. Fully adjustable, opened and closed positions
. Maximum degrees of swing:115 degrees - Model 400 standard 125 degrees - Model 400 long
. Maximum leaf weight: 1,300 pounds (Standard)1500 puonds (EG)
This heavy duty, adjustable concealed stop is designed specifically for the Model 400 swing operator equipped with a front flange and mounting studs. It mounts to the operator with four bolts and is built with four oversized, threaded rods.
On older Model 400 operators now in service, the front flange can bereplaced to accept the Model 84 stop.
. Designed for Model 400 standard, rapid and long gate mounted operators with a front flange equipped with mounting studs
Features:
* Measurements and weights stated in this Price List are approximate and subject to change without notice. For exact specifications, please refer to the Installation Manual or contact our technical department at 1-800-221-8278 or 1-866-925-3222.
Ideal useage for the BC Pro and 700I battery backup systems: Fail safe(gates open during power outage and remain open until power is restored).Even if the power outage is prolonged and the batteries die, the gates willremain open to allow normal ingress and egress during the power outage.
Because the BC Pro and 700I battery backup systems run off the batteries,gate operation during a power outage is dependant upon the batteries beingwell conditioned and charged. If they are not, the voltage does not runthrough to the control panel being backed up. The battery backup systemdoes not shut down at all during a power outage, instead powering all periph-erals being backed up with our battery backup system. Thus, the moreperipherals used, the faster the batteries will die. Once the batteries do die,the gates will become inoperable and will stop at the position they were atwhen the batteries failed. Therefore, it is important to understand that the BCPro or 700I battery backup systems are not intended to work a Fail secureapplication (gates remain closed during power outage). Again, long termpower outages could result in the batteries failing at some point, possiblyleaving the gates either partially or fully open or closed.
Specifications BC Pro 1050 700i
Size: 14 x 16 x 6 in. (35.6 x 40.6 x 15.2 cm)Weight: 45 lbs. (16.8 kg)Input/Output voltage: 115 VAC 230 VACInput/Output frequency: 60 Hz 50/60 HzOutput VA: 1050 700Output watts: 680 450Recharge rate to 90%: 2-4 hours
Maximum surge current: 36,000 amps 160**AC suppression joule/amp ratings
Low volt switch to battery: 94 VAC 190 VACMax amp. draw: 5 amp. 3 amp.
Shipping Weight: 45 lbs. (16.8 kg)Part Number: 3520 3521Price: $1,753 $1,753
Dual Configuration:Dual System Part Number: 3522 3523Price: $1,988 $1,988
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:11 AM Page 71
72
Mounting Post Footprint
FAAC Photobeam Systems
.Anodized aluminum
.Standard post: 22 in. high (57.5 cm)
.Double post (holds photobeam and control switch): 44 in. (111.5 cm)NOTE: Photobeam sets require 2 posts
Features:
Photobeam Photocell SetDesigned for wall mounting or for mounting in special extruded aluminum mounting posts.
.Directional photocell with diagonal alignment
.Angle of detection: +- 4 degrees
.Range: 100 ft (30 m)
.Obstacle detection time: 10 ms
.Housing protection IP 54
.Required power supply: 24-35 VDC (available on FAAC con-
trol panels)
.Output relay rating: 100 MA/24VDC.Output relay: N.O. (Normally
Opened) and N.C. (Normally Closed)
.Receiver and Transmitter provide reliable all-weather sensing
.Dimensions: 2.75 in. x 3.75 in. x 1.75 in. (7 cm x 9.5 cm x 4.5 cm)
Features:
* Measurements and weights stated in this Price List are approximate and subject to change without notice. For exact specifications, please refer to the Installation Manual or contact our technical department at 1-800-221-8278.
Photobeam Mounting Posts (Standard and Double)Photobeam Mounting Post and FoundationPlate for Photobeam Set
401035737630*
401028737630*
3.54 in.(9 cm)
2.38 in.(5.8 cm)
2.38 in.
(5.8
cm)
2.75 in.(7 cm)
4.5 in.
(11.5
cm)
3.75 in.
(9.5
cm)
Photobeam Set
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:11 AM Page 72
73
Photocell Metal Housing
Entry Sytem Devices
Photocell Plastic Housing
Photocell Plastic Housing Dimensions: 2.5 in. high x 2.25 in. wide x 2.75 in. deep (6.4 cm x 5.7 cm x7 cm)
Photocell Metal HousingPowder coated steel.Dimensions: 2.5 in. high x 2.5 in. wide x 2.75 in. deep (6.4 cm x 6.4 cm x7 cm)
Standard Photocell Set
Standard Photocell SetDimensions: 2.75 in. wide x 2.75 in. high x 4 in. deep (7 cm x 7 cm x 10.2 cm) Depth measurement includes housing.The Standard Photocell Set requires the following additional equip-ment (priced separately):Multi-Use Metal Housing, or Multi-Use Plastic Housing
Features:
Required power supply: 19 - 34 VDC or 15 - 25 VAC(available on FAAC control panels).
Output relay rating: 25 VAC, 0.1A
Output relay: N.O. (Normally Opened) and N.C. (Normally Closed)
Transmitter to receiver sensing provides reliable all-weather sensing
Range: 90 ft (27 m)
FAAC Photocell Systems
Model 400 Hydraulic Swing Gate Operator
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:11 AM Page 73
74
Model 400 Hydraulic Swing Gate Operator
Model 455D control panel
Detail of control panel schematic
Model 455D control panelTo simplify understanding of the new detector layout, the Model 455 D back-plate is shown here with control panel, outlet switch, test button and appropri-ate terminal strips. Also shown are the new "free exit" and "safety" loopdetector plug-in bases. These will come as diagramed with all enclosures.
The shadow loop detector can be added as an option. The shadow kit iscomprised of another base, detector, and relay. These items are shown in thediagram within the bold, broken line section with instructions below.
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:11 AM Page 74
75
Visit us online atwww.faacusa.com
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:11 AM Page 75
76
Model 402 & 422
Mod
el 4
02 &
422
FAAC operators for swinging gates are among thesafest available. The anti-entrapment and safetyprovided by all gate operators can and should beimproved with photocells, loop detectors, sensingedges and/or other similar devices. FAAC strongly recommends that devices such as thesebe installed with all automated gate systems.
To guarantee the safety and efficiency of its equipment, FAAC strongly recommends that qualified personnel test the safety system on anannual basis, as well as maintain the overallhydraulic or mechanical system.
Hydraulic Swing Gate Operators
.Designed for light duty gate systems
. Two year limited warranty(see back cover)
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:11 AM Page 76
77
Model 402 & 422 Hydraulic Swing Gate OperatorsThe Models 402 and 422 are designed for light-dutygate systems and are not recommended for solidgates.. Adjustable hydraulic pressures to control swing . Minimized pinch points. Hydraulic locking of the gate available in opened
and or closed position. Quiet operation. Self-lubricating for long life. Two year warranty (see back cover)
. FAAC’s most economical hydraulic operator
. 12 second swing to clear 90o.
. Locks in the opened or closed positions (CBA/CBC Only)
. Maximum leaf length: 10 ft (3 m)
. Maximum leaf weight: 900 lb (410 kg)
. Maximum cycles per hour: 30
Model 402 is FAAC’s most economi-cal gate mounted hydraulic operator. Model 402 manual release
Model 402
(Note: Positive Gate Stops, which limit gate travel, arerequired in the opened and closed positions, see page 42.)
Model 402
. 12 second swing to clear 90o
. Locking in both directions available
. Easy installation and maintenance
. Swivel attachment to front bracket
. Oil can be checked without removing operator frogate
. Maximum leaf length: 10 ft (3 m)
. Maximum leaf weight: 900 lb (410 kg)
. Maximum cycles per hour: 30
The Model 422 features hydraulic lockingin both the opened and closed positions. It has a keyed manual release.
Model 422 manual release
Model 422
Model 422
* Measurements and weights stated in this Price List are approximate and subject to changewithout notice. For exact specifications, please refer to the Installation Manual or contact ourtechnical department at 1-800-221-8278.
37. 75 i n. ( 95. 9 cm)
26. 1 i n. ( 66. 4 cm)
3. 35 i n. ( 8. 5 cm)
2. 4 i n. ( 6. 1 cm)
9. 45 i n
( 24 cm)
38. 9 i n. ( 98. 7 cm)
27. 25 i n. ( 693 cm) 3. 35 i n.( 8. 5 cm)4. 45 i n. ( 11. 3 cm)
24 i n. ( 6. 1 cm)
9. 45 i n
( 24 cm)
NOTE: FAAC hydraulic operators are not recommended for use on solid-faced gates which are subject to gusty and/or high wind situations. Solid-faced is defined as 50% or more of the gate being solid. If you still havequestions regarding your specific installation, please contact our technical department at 1-800-221-8278 or 1-866-925-3222.
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:11 AM Page 77
78
Model 402 & 422 Hydraulic Swing Gate Operators
To make the above a master/slave (bi-parting) system, use the following:
402 CBC Standard Basic Single Kit
422 CBAC Standard Basic Single Kit
Model Description Package Includes Shipping Voltage Part PriceWeight Number
115V230V
115V230V
39 lb (17.7 kg)
39 lb (17.7 kg)
22 lb (10 kg)
22 lb (10 kg)
1044682.5*1044681.5*
10420012.5*1042001.5*
$2,2622,262
2,6202,620
402 CBC Standard Operator Only
422 CBAC Standard Operator Only
Use to make the single kit into amaster/slave, or use to orderreplacement operator.
115V230V
115V230V
10446821044681
104200121042001
$1,3041,304
1,5561,556
Model Description Package Includes Shipping Voltage Part PriceWeight Number
To complete your gate system, or for replacement purposes, the following accessories can be ordered:
402 CBC operator, 455D control panel,14x16 pre-wired enclosure
422 CBAC operator, 455D control panel,14x16 pre-wired enclosure
Model 455D control panel
Model 402/422 operators require aModel 455D control panel, whichcan operate a single leaf or masterslave gate system. The 455D hasa convenient reference diagram onthe inside cover.
* Measurements and weights stated in this PriceList are approximate and subject to change withoutnotice. For exact specifications, please refer to theInstallation Manual or contact our technical department at 1-800-221-8278 or 1-866-925-3222.
The 455D has the following functions and features:. Operates a single leaf or a
bi-parting gate. Provides opening and closing
"slow down, soft stop" convenience. Power supply: 115 VAC (+/- 10%)
or 230 VAC (+6% -10%) 50-60 HZ). Absorbed power: 10W. Motor max load: 800W. Accessories max load: .5 amp. Electric lock max load: 15 Va. Operating temperature: -78oF
to +131oF. Protection fuses: .800 mA (accessories)
5 amp (motors). Operating logics:A (automatic): signal to open, gate closes automatically after selected timed pauseS (security): similar to A logic, useful in reducing tailgatingE (semi-automatic): garage door-like operation; signal to open, signal to closeEP (semi-automatic): similar toE logic,but second signal stops gate, thirdsignal reverses gateB (manned, pulsed): designed forguard station use, requires 3-buttonswitch (pulsed) to open, close and stop gateC (manned, constant): similar to B logic, but 3-button switch requiresconstant pressure on each button
. Opening/closing time: 0 to 120 seconds (programmable)
. Pause time: 0 to 4 minutes (programmable)
. Closing leaf delay: 0 to 4 minutes (programmable)
. Opening leaf display: 2 seconds (can be disabled)
. Torque: adjustable from 0 to 50 levels
. On board programming via push button
. Easy interconnection of actuating and reversing devices
. Open/Hold open function
Accessory Description Shipping Voltage Part PriceWeight Number
Photobeam Directional with diagonal alignment; 2 lb (1 kg) 785163 $237required for UL-325 compliance.
Photobeam Mounting Foundation plate included 5 lb (2.2 kg) 401028/ 119Post: Standard 737630*
Photobeam Mounting Foundation plate included 9 lb (4.1 kg) 401035/ 192Post: Double 737630*
Photocell Set: also reguires 2 lb (1 kg) 785152 290Photocell Metal Housing or 3 lb (1.4 kg) 720089 43Photocell Plastic Housing 2 lb (1 kg) 720086 9
Receiver FAAC single channel 1 lb (.5 kg) 1RP418DS 77Transmitter FAAC single button 1 lb (.5 kg) 1TM418DS 44Transmitter FAAC two button 1 lb (.5 kg) 787317 51Antenna FAAC tuned antenna kit 2 lb (1 kg) 412003 85
Loop Detector DSP 15 1 lb (.5 kg) 2664 226Loop Detector DSP II; plugs in control panel backplate 1 lb (.5 kg) 2665 135Loop Detector DSP 10; plugs in control panel backplate 1 lb (.5 kg) 2667 148
& has sensitivity adjustment
Shadow Detector kit Includes one detector, base, and 1 lb (.5 kg) 115V 2665.1* 203relay for shadow loop 230V 2665.2* 203
Shadow Detector kit (SP 10) Includes one detector, base, and 1 lb (.5 kg) 115V 2667.1* 214relay for shadow loop 230V 2667.2* 214
Mag Lock Relay Kit Includes base & relay for mag lock 24V ac 2352 48
Positive Stop Mdl 80, 4-rod internal stop, 402 4 lb (1.8 kg) 3554 187Mdl 80, 4-rod internal stop, 422 4 lb (1.8 kg) 3555 187
Battery Backup BC Pro Single system backup 45 lb (16.8 kg) 115V 3520 1,753BC Pro Dual system backup 45 lb (16.8 kg) 115V 3522 1,988700i Single system backup 45 lb (16.8 kg) 230V 3521 1,753700i Dual system backup 45 lb (16.8 kg) 230V 3523 1,988
Control panel 455D (replacement only) 3 lb (1.4 kg) 115V 790919 709 230V 790926 709
455D w/ 14 x 16 in fiberglass, 26 lb (11.8kg) 115V 455D115F* 1,188hinged, lockable enclosure 230V 455D220F* 1,188455D w/20x16 metal, 115V 455D115A* 1,422hinged enclosure 230V 455D230A* 1,422
You can upgrade from the 14 X16 to a 20 X16 metal pre-wired enclosure for only $250.00 gross more.
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:11 AM Page 78
79
Model 402 & 422 Hydraulic Swing Gate Operators
FAAC Model BC Pro 1050 and Model 700i battery back-up units
Positive Stops (concealed)
Model BC Pro 1050 battery back-up
Stop-O-Matic Model 80 shown in open and closed positions.
. For FAAC models 402 and 422
. Steel construction
. All versions mount with existing FAAC hardware and require no additional attachment points
. Stop is totally concealed under operator cover
. Accommodates Inward or Outward Swing with no additional fabrication
. Maximum degrees of swing: Limited by operator
. Maximum leaf length: Limited by operator
. Maximum leaf weight: Limited by operator
NOTE: Model 80 is not recomended for use in highwind situations.
This adjustable gate stop is attached to the operator front flange bytwo socket head screws. Once the open and closed stop adjust-ments are set, the protective cover is slid over the stop andsecured with an end cap and screws.
The Model 80 can be added to an operator at any time.Features:
* Measurements and weights stated in this Price List are approximate and subject to change without notice. For exact specifications, please refer to the Installation Manual or contact our technical department at 1-800-221-8278 or 1-866-925-3222.
Ideal useage for the BC Pro and 700I battery backup systems: Fail safe(gates open during power outage and remain open until power is restored).Even if the power outage is prolonged and the batteries die, the gates willremain open to allow normal ingress and egress during the power outage.
Because the BC Pro and 700I battery backup systems run off the batteries,gate operation during a power outage is dependant upon the batteries beingwell conditioned and charged. If they are not, the voltage does not runthrough to the control panel being backed up. The battery backup systemdoes not shut down at all during a power outage, instead powering all periph-erals being backed up with our battery backup system. Thus, the moreperipherals used, the faster the batteries will die. Once the batteries do die,the gates will become inoperable and will stop at the position they were atwhen the batteries failed. Therefore, it is important to understand that the BCPro or 700I battery backup systems are not intended to work a Failsecure application (gates remain closed during power outage). Again, longterm power outages could result in the batteries failing at some point, possibly leaving the gates either partially or fully open or closed.
Specifications BC Pro 1050 700i
Size: 14 x 16 x 6 in. (35.6 x 40.6 x 15.2 cm)Weight: 45 lbs. (16.8 kg)Input/Output voltage: 115 VAC 230 VACInput/Output frequency: 60 Hz 50/60 HzOutput VA: 1050 700Output watts: 680 450Recharge rate to 90%: 2-4 hours
Maximum surge current: 36,000 amps 160**AC suppression joule/amp ratings
Low volt switch to battery: 94 VAC 190 VACMax amp. draw: 5 amp. 3 amp.
Shipping Weight: 45 lbs. (16.8 kg)Part Number: 3520 3521Price: $1,753 $1,753
Dual Configuration:Dual System Part Number: 3522 3523Price: $1,988 $1,988
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:11 AM Page 79
80
Model 402 & 422 Hydraulic Swing Gate Operators
Mounting Post Footprint
FAAC Photobeam Systems
.Anodized aluminum
.Standard post: 22 in. high (57.5 cm)
.Double post (holds photobeam and control switch): 44 in. (111.5 cm)NOTE: Photobeam sets require 2 posts
Features:
* Measurements and weights stated in this Price List are approximate and subject to change without notice. For exact specifications, please refer to the Installation Manual or contact our technical department at 1-800-221-8278.
Photobeam Mounting Posts (Standard and Double)Photobeam Mounting Post and FoundationPlate for Photobeam Set
401035737630*
401028737630*
3.54 in.(9 cm)
2.38 in.(5.8 cm)
2.38 in.
(5.8
cm)
2.75 in.(7 cm)
4.5 in.
(11.5
cm)
3.75 in.
(9.5
cm)
Photobeam Photocell SetDesigned for wall mounting or for mounting in special extruded aluminum mounting posts.
.Directional photocell with diagonal alignment
.Angle of detection: +- 4 degrees
.Range: 100 ft (30 m)
.Obstacle detection time: 10 ms
.Housing protection IP 54
.Required power supply: 24-35 VDC (available on FAAC con-
trol panels)
.Output relay rating: 100 MA/24VDC.Output relay: N.O. (Normally
Opened) and N.C. (Normally Closed)
.Receiver and Transmitter provide reliable all-weather sensing
.Dimensions: 2.75 in. x 3.75 in. x 1.75 in. (7 cm x 9.5 cm x 4.5 cm)
Features:
Photobeam Set
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:11 AM Page 80
81
Photocell Metal Housing
Entry Sytem Devices
Photocell Plastic Housing
Photocell Plastic HousingDimensions: 2.5 in. high x 2.25 in. wide x 2.75 in. deep(6.4 cm x 5.7 cm x7 cm)
Photocell Metal HousingPowder coated steel.Dimensions: 2.5 in. high x 2.5 in. wide x 2.75 in. deep(6.4 cm x 6.4 cm x7 cm)
Standard Photocell Set
Standard Photocell SetDimensions: 2.75 in. wide x 2.75 in. high x 4 in. deep (7 cm x 7 cm x 10.2 cm) Depth measurement includes housing.The Standard Photocell Set requires the following additional equip-ment (priced separately):Multi-Use Metal Housing, or Multi-Use Plastic Housing
Features:
Required power supply: 19 - 34 VDC or 15 - 25 VAC(available on FAAC control panels).
Output relay rating: 25 VAC, 0.1A
Output relay: N.O. (Normally Opened) and N.C. (Normally Closed)
Transmitter to receiver sensing provides reliable all-weather sensing
Range: 90 ft (27 m)
FAAC Photocell Systems
Model 402 & 422 Hydraulic Swing Gate Operators
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:11 AM Page 81
82
Model 402 & 422 Hydraulic Swing Gate Operators
Model 455D control panel
Detail of control panel schematic
Model 455D control panelTo simplify understanding of the new detector layout, the Model 455 D back-plate is shown here with control panel, outlet switch, test button and appropri-ate terminal strips. Also shown are the new "free exit" and "safety" loopdetector plug-in bases. These will come as diagramed with all enclosures.
The shadow loop detector can be added as an option. The shadow kit iscomprised of another base, detector, and relay. These items are shown in thediagram within the bold, broken line section with instructions below.
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:11 AM Page 82
83
Visit us online atwww.faacusa.com
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:11 AM Page 83
84
Model 750
Mod
el 7
50
FAAC operators for swinging gates are amongthe safest available. The anti-entrapment andsafety provided by all gate operators can andshould be improved with photocells, loopdetectors, sensing edges and/or other similardevices. FAAC strongly recommends thatdevices such as these be installed with allautomated gate systems.
To guarantee the safety and efficiency of itsequipment, FAAC strongly recommends thatqualified personnel test the safety system onan annual basis, as well as maintain the overallhydraulic or mechanical system.
In-Ground Swing Hydraulic Gate Operators
.Designed for residential applications
. Two year limited warranty(see back cover)
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:11 AM Page 84
85
The 455 D Control Panel. UL 325 compliant. Provides “slow down”
feature on open and close, at any position for all FAAC hydraulic operators plus Model 412 High Voltage versionand Model 415 electromechanical swing gate operator.
. Fully programmable using built-in push buttons, LED screen and easy-to-follow instructions
Model 750 In-Ground Hydraulic Swing Gate Operators
The Model 750 provides an “invisible” installation by placing the drive unit below ground.
Model 750 operators require the 455 D control panelwhich will operate a single leaf or a master/slavegate.
. Control panels may be purchased separately.
Model 750 gate operators features:. Hydraulic operation. Adjustable hydraulic pressures to control swing. Minimized pinch points. Available hydraulic locking of the gate in position. Quiet operation. Self-lubricating for long life. Opening of up to 180 degrees. Maximum leaf length: 13 ft (4 m). Maximum leaf weight: 1500 lb (680 kg). Two year warranty (see back cover)
Model 455D control panel and pre-wired enclosure
Model 750
Note: Positive Gate Stops, which limit gate travel, are required in the opened andclosed positions.
UL325
Choice of ActuatorAbbreviations: CBAC = hydraulic locking opened and closed; normal swing speedCBA/CBC = hydraulic locking in the closed/open position; normal swing speedSB = without hydraulic locking; normal swing speed
NOTE: All models listed can be converted to CBA, CBC or SBupon request.To simplify ordering the right 750 model that willwork best for your application, you only need to answer two simplequestions:
1. What is the maximum length of your gate leaf: < 8 ft (2.4 m) (CBAC) or > 9 ft (2.7 m) (SB) up to a max. of 13 ft (4 m)2. What degree of swing do you need: 110o or 180o
In-Ground Swing Hydraulic Gate Operators
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:11 AM Page 85
Model 750 In-Ground Hydraulic Swing Gate OperatorsThe Model 750 hydraulic system consists of a control panel and four hydraulic componentgroups:
Model 455D control panel and 14x16 in. pre-wired enclosure
455 D Control panel and enclosure
ControlPanel
PumpMotor
Foundation plate on whichthe Drive Unit is placed.
4.
6 in. (15.2 cm)
15.81 in.
(40.2 cm)
4.81 in. (12.2 cm)
7.88 in. (20 cm)
The 750 Drive Unit (with metal enclosure and top) is available in both a 110o swing or a 180o swing version.
3.
5.5 in.
(14.2 cm)
3.17 in.
(8.1 cm)
13.9 in. (35.3 cm)
9.67 in. (24.6 cm)
The 750 Pump Motor Assembly and enclosure, which is avail-able with or without hydraulic locking.
1.
2. . One or two Pump Motor Assemblies. One or two 33 ft (10 m) lengths of flex
hose and one or two connector kits.. One or two Drive Units with metal
enclosure and top. One or two foundation plates. 455 D Control Panel & Enclosure.
Attaches to the bottom of the gate
Slides through sidechannel as gate swings
Positive stops (included with part # 2142)
750/760 collar
Side View
Top View
The 750/760 extension arm with built-in positive stops (optional)
New!
86
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:11 AM Page 86
Model 750 In-Ground Hydraulic Swing Gate Operators
The CBAC version is only available for gateleaf lengths of 8 feet or less. However, forcertain applications, it is possible to installthe CBAC on longer leaves. For informa-tion contact FAAC's technical department at(800) 221-8278.
NOTE: FAAC hydraulic operatorsare not recommended for use onsolid-faced gates which are sub-ject to gusty and/or high wind sit-uations. Solid-faced is defined as50% or more of the gate beingsolid. If you still have questionsregarding your specific installa-tion, please contact our technicaldepartment at 1-800-221-8278.
* Measurements and weights stated in thisPrice List are approximate and subject tochange without notice. For exact specifica-tions, please refer to the Installation Manualor contact our technical department at 1-800-221-8278.
* Wind and gate design will affect perform-ance specifications.
* The Model 750 is not recommended foruse on opaque gates. The CBAC and CBCversions are not recommended for use inhigh wind situations.
* Duty cycle is measured in an ambienttemperature of 72o F (22o C) and 115 VACor 230 VAC. Variations in temperature andfluctuations in voltages will affect duty cycle.
* An electric or magnetic lock is recom-mended for any gate longer than 12 ft. (3.7m).
* Operating temperature range: -33o to 165o
F (-36o to 74o C).
* Positive Gate Stops, which limit gate trav-el, are required in the opened and closedpositions.
Model Description Shipping Voltage Maximum Maximum Part PriceWeight Leaf Length Leaf Weight Number
750 Pump Motor Assembly 12 lb (5.4 kg) 115 VAC 13 ft (4 m) 1500 lb (680 kg) 107725 $1,037(Includes hydraulic pump enclosure) 230 VAC 13 ft (4 m) 1500 lb (680 kg) 1077251 1,037
750 110o Drive Unit with metal enclosure and top 26 lb (11.8 kg) 13 ft (4 m) 1500 lb (680 kg) 108757 1,074750 180o Drive Unit with metal enclosure and top 26 lb (11.8 kg) 13 ft (4 m) 1500 lb (680 kg) 108758 1,238
455D control panel with 26 lb (11.8 kg) 115 VAC 455D115F* 1,18814 x 16 pre-wired enclosure 26 lb (11.8 kg) 230 VAC 455D220F* 1,188
To complete your gate system, or for replacement purposes, the following accessories can be ordered:
Accessory Description Shipping Weight Voltage Part Number Price
Foundation Plate Each 750 Drive Unit must be on a foundation plate. 11 lb (5 kg) 737607 $62
Flex Hose Connector Kit The kit includes the required connection hardware to attach the two 2 lb (.9 kg) 390421* 77hoses which run between a pump motor assembly and drive unit.
Flexible Hydraulic Hose Length: 33 ft (10m) Outside Diameter: 5/16” (8mm). 3 lb (1.4 kg) 390422 139Length: 328 ft (100m) Outside Diameter: 5/16” (8mm). 30 lb (13.6 kg) 390439Also sold by the foot for any length greater then 33 ft. 4.00 per foot
Hydraulic Pump Enclosure (replacement) 3 lb (1.4 kg) 720309 99
750/760 Extension Arm The arm is used when the 750 or 760 drive unit cannot 9 lb (4.1 kg) 738704 113
2 piece be aligned with the pivot point of the gate leaf.
750/760 Extension Arm The arm is used when the 750 or 760 drive unit cannot 9 lb (4.1 kg) 2141 1133 piece be aligned with the pivot point of the gate leaf.
750/760 Extension Arm For alignment problems plus provides positive stops 10 lb (4.5 kg) 2142 239with positive stops 2 piece
Photobeam Directional with diagonal alignment; 2 lb (1 kg) 785163 237required for UL-325 compliance.
Photobeam Mounting Foundation plate included 5 lb (2.2 kg) 401028/ 119Post: Standard 737630*
Photobeam Mounting Foundation plate included 9 lb (4.1 kg) 401035/ 192Post: Double 737630*
Photocell Set: also reguires 2 lb (1 kg) 785152 290Photocell Metal Housing or 3 lb (1.4 kg) 720089 43Photocell Plastic Housing 2 lb (1 kg) 720086 9
Receiver FAAC single channel 1 lb (.5 kg) 1RP418DS 77Transmitter FAAC single button 1 lb (.5 kg) 1TM418DS 44Transmitter FAAC two button 1 lb (.5 kg) 787317 51Antenna FAAC tuned antenna kit 2 lb (1 kg) 412003 85
Loop Detector DSP 15 1 lb (.5 kg) 2664 226Loop Detector DSP II; plugs in control panel backplate 1 lb (.5 kg) 2665 135Loop Detector DSP 10; plugs in control panel backplate 1 lb (.5 kg) 2667 148
& has sensitivity adjustment
Shadow Detector kit Includes one detector, base, and 1 lb (.5 kg) 115V 2665.1* 203relay for shadow loop 230V 2665.2* 214
Mag Lock Relay Kit Includes base & relay for mag lock 24V ac 2352 48
Shadow Detector kit Includes one detector, base, and 1 lb (.5 kg) 115V 2667.1* 214(SP 10) relay for shadow loop 230V 2667.2* 214
Battery Backup BC Pro Single system backup 45 lb (16.8 kg) 115V 3520 1,753BC Pro Dual system backup 45 lb (16.8 kg) 115V 3522 1,988700i Single system backup 45 lb (16.8 kg) 230V 3521 1,753700i Dual system backup 45 lb (16.8 kg) 230V 3523 1,988
Control panel 455D (replacement only) 3 lb (1.4 kg) 115V 790919 709 230V 790926 709
455D w/ 14 x 16 in fiberglass, 26 lb (11.8kg) 115V 455D115F* 1,188hinged, lockable enclosure 230V 455D220F* 1,188
455D w/20x16 115V 455D115A* $1,422metal hinged enclosure 230V 455D230A* 1,422
In-Ground Hydraulic Swing Gate Operators
87
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:11 AM Page 87
88
Specifications BC Pro 1050 700i
Size: 14 x 16 x 6 in. (35.6 x 40.6 x 15.2 cm)Weight: 45 lbs. (16.8 kg)Input/Output voltage: 115 VAC 230 VACInput/Output frequency: 60 Hz 50/60 HzOutput VA: 1050 700Output watts: 680 450Recharge rate to 90%: 2-4 hours
Maximum surge current: 36,000 amps 160**AC suppression joule/amp ratings
Low volt switch to battery: 94 VAC 190 VACMax amp. draw: 5 amp. 3 amp.
Shipping Weight: 45 lbs. (16.8 kg)Part Number: 3520 3521Price: $1,753 $1,753
Dual Configuration:Dual System Part Number: 3522 3523Price: $1,988 $1,988
Model 750 In-Ground Hydraulic Swing Gate Operators
FAAC Model BC Pro 1050 and Model 700i battery back-up units
Model BC Pro 1050 battery back-up
* Measurements and weights stated in this Price List are approximate and subject to change withoutnotice. For exact specifications, please refer to the Installation Manual or contact our technical depart-ment at 1-800-221-8278.
Ideal useage for the BC Pro and 700I battery backup systems: Fail safe(gates open during power outage and remain open until power is restored).Even if the power outage is prolonged and the batteries die, the gates willremain open to allow normal ingress and egress during the power outage.
Because the BC Pro and 700I battery backup systems run off the batteries,gate operation during a power outage is dependant upon the batteries beingwell conditioned and charged. If they are not, the voltage does not runthrough to the control panel being backed up. The battery backup systemdoes not shut down at all during a power outage, instead powering all periph-erals being backed up with our battery backup system. Thus, the moreperipherals used, the faster the batteries will die. Once the batteries do die,the gates will become inoperable and will stop at the position they were atwhen the batteries failed. Therefore, it is important to understand that theBC Pro or 700I battery backup systems are not intended to work a Failsecure application (gates remain closed during power outage). Again, longterm power outages could result in the batteries failing at some point, possi-bly leaving the gates either partially or fully open or closed.
Photocell Metal Housing
Entry Sytem Devices
Photocell Plastic Housing
Photocell Plastic Housing Dimensions: 2.5 in. high x 2.25 in. wide x 2.75 in. deep(6.4 cm x 5.7 cm x7 cm)
Photocell Metal HousingPowder coated steel.Dimensions: 2.5 in. high x 2.5 in. wide x 2.75 in. deep(6.4 cm x 6.4 cm x7 cm)
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:11 AM Page 88
89
Model 750 In-Ground Hydraulic Swing Gate Operators
Mounting Post Footprint
FAAC Photobeam Systems
.Anodized aluminum
.Standard post: 22 in. high (57.5 cm)
.Double post (holds photobeam and : control switch) 44 in. (111.5 cm)NOTE: Photobeam sets require 2 posts
Features:
Photobeam Photocell SetDesigned for wall mounting or for mounting inspecial extruded aluminum mounting posts.
.Directional photocell with diagonal alignment
.Angle of detection: +- 4 degrees
.Range: 100 ft (30 m)
.Obstacle detection time: 10 ms
.Housing protection IP 54
.Required power supply: 24-35 VDC (available on FAACcontrol panels)
.Output relay rating: 100 MA/24VDC
.Output relay: N.O. (Normally Opened) and N.C. (Normally Closed)
.Receiver and Transmitter provide reliable all-weather sensing Dimensions: 2.75 in. x 3.75 in. x 1.75 in. (7 cm x 9.5 cm x 4.5 cm)
Features:
Photobeam Mounting Posts (Standard and Double)Photobeam Mounting Post and FoundationPlate for Photobeam Set
401035737630*
401028737630*
3.54 in.(9 cm)
2.38 in.(5.8 cm)
2.38 in.
(5.8
cm)
2.75 in.(7 cm)
4.5 in.
(11.5
cm)
3.75 in.
(9.5
cm)
Photobeam Set
Standard Photocell Set
Standard Photocell SetDimensions: 2.75 in. wide x 2.75 in. high x 4 in. deep (7 cm x 7 cm x 10.2 cm)
Depth measurement includes housing.
The Standard Photocell Set requires the following addition-al equipment (priced separately):
Multi-Use Metal Housing, or Multi-Use Plastic Housing
Features:Required power supply: 19 - 34 VDC or 15 - 25 VAC(available on FAAC control panels).
Output relay rating: 25 VAC, 0.1A
Output relay: N.O. (Normally Opened) and N.C. (Normally Closed)
Transmitter to receiver sensing provides reliable all-weather sensing - Range: 90 ft (27 m)
FAAC Photocell Systems
Model Description Package Includes Shipping Voltage Part PriceWeight Number
Foundation plate included
Foundation plate included
5 lb (2.2 kg)
9 lb (4.1 kg)
Photobeam Mounting PostStandard
Photobeam Mounting PostDouble
401028/ 737630*
401035/737630*
$119
192
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:11 AM Page 89
90
Model 750 In-Ground Hydraulic Swing Gate Operators
Model 455D control panel
Detail of control panel schematic
Model 455D control panelTo simplify understanding of the new detector layout, the Model 455 D back-plate is shown here with control panel, outlet switch, test button and appro-priate terminal strips. Also shown are the new "free exit" and "safety" loopdetector plug-in bases. These will come as diagramed with all enclosures.
The shadow loop detector can be added as an option. The shadow kit is comprised of another base, detector, and relay. These items are shown in the diagram within the bold, broken line section with instructions below.
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:11 AM Page 90
91
Visit us online atwww.faacusa.com
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:11 AM Page 91
92
Model 760
Mod
el 7
60
FAAC operators for swinging gates are among thesafest available. The anti-entrapment and safetyprovided by all gate operators can and should beimproved with photocells, loop detectors, sensingedges and/or other similar devices. FAAC strongly recommends that devices such as thesebe installed with all automated gate systems.
To guarantee the safety and efficiency of its equip-ment, FAAC strongly recommends that qualifiedpersonnel test the safety system on an annualbasis, as well as maintain the overall hydraulic ormechanical system.
In-Ground Hydraulic Swing Gate Operators
.Designed for residential applications
. Two year limited warranty(see back cover)
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:11 AM Page 92
93
Model 760 In-Ground Hydraulic Swing Gate OperatorsThe Model 760 offers many of the benefits of the Model 750, alongwith the special feature of having the drive and power units com-bined together in-ground.
Model 760 operators require the 455 D control panel whichwill operate a single leaf or a master/slave gate.
Model 760 gate operators features:. Hydraulic actuation. Adjustable hydraulic pressures to control swing . Minimized pinch points. Available hydraulic locking of the gate in position. Quiet operation. Self-lubricating for long life. Opening of up to 148 degrees. Maximum leaf length: 13 ft (4 m). Maximum leaf weight: 1500 lb (680.4 kg). Two year warranty (see back cover)
Advantages:. Less stress on the gate and operator. Smoother operation
However:. If gate swing is less than 90 degrees, soft stop will only operate
in the opened or closed position. Slowdown increases total closing time
Model 455D control panel and pre-wired enclosure
Model 760
UL325
10.25 in.
(26 cm)
19.3 in. (49 cm
)
6.25 in.
(15.9 cm)
8.39 in.
(21.3 cm)
Featuring “Soft Stop” slow-down.
* Measurements and weights stated in this Price List are approximate and subject to change without notice. For exact specifications,refer to the Installation Manual or contact our technical department at 1-800-221-8278.* Wind and gate design will affect performance specifications.* Duty cycle is measured in an ambient temperature of 72 degrees F (20 degrees C) and 115 VAC or 230 VAC. Variations in tempera-ture and flucuations in voltages will affect duty cycle.* An electric or magnetic lock is recommended for any gate longer than 12 ft. (3.7 m).* Operating temperature range: -33 to 165 degrees F (-36 to 74 degrees C)* Positive stops, which limit gate travel, are required in the opened and closed positions.
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:11 AM Page 93
94
Attaches to the bottom of the gate
Slides through sidechannel as gate swings
Positive stops (included with part # 2142)
750/760 collar
Side View
Top View
Model 760 In-Ground Hydraulic Swing Gate Operators
The Model 760 system consists of a control panel and 2 or 3 component groups:
The 455 D programmable control panel with LED readoutThe 455 D control panel in 14x16 in. pre-wired enclosure
1. The Drive-Pump Unit
2. The Load BearingBox with top
3. And, on CBAC models,the Keyed Manual Release is required.
The 750/760 extension arm.The 750/760 extension arm with built-in positive stops (optional)
New!
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:11 AM Page 94
95
Model 760 In-Ground Hydraulic Swing Gate Operators760 Models and Components
Definitions:The Soft Stop feature requires agate swing of at least 90 degreesin order to operate at both open-ing and closing. If gate swing isless than 90 degrees, the SoftStop feature operates either atopening or at closing, but not atboth. Please refer to the 760Instruction Manual.
Duty Cycle assumes 115 or 230VAC and an ambient temperatureof 72oF (22oC). OperatingTemperature Range is -33o to165oF (-36o to 74oC).
NOTE: FAAC hydraulic operators arenot recommended for use on solid-faced gates which aresubject to gusty and/or highwind situations. Solid-faced isdefined as 50% or more of thegate being solid. If you stillhave questions regarding yourspecific installation, pleasecontact our technical depart-ment at 1-800-221-8278 or 1-866-925-3222.
To make the above a master/slave (bi-parting) system, use the following:
760 Standard Basic Single Kit
Model Description Package Includes Shipping Wt. Voltage Part No. Price115V230V
68 lb (30.8 kg)2 boxes
32 lb (14.5 kg)
22 lb (10kg)
1067702.5*1067701.5*
$3,7403,740
760 Standard Operator Only
Load bearing box
Use to make the single kit into a master/slave,or use to order replacement operator.
Required for all 760 installations
115V230V
10677021067701
4900985
$2,2732,273
523
Model Description Package Includes Shipping Wt. Voltage Part No. Price
760 operator w/ 455D control panel, 14 x 16 in. pre-wired enclosure & load bearing box
Model 455D control panelModel 760 operator requires aModel 455D control panel, whichcan operate a single leaf or masterslave gate system. The 455D hasa convenient reference diagram onthe inside cover.
* The Model 760 is not recommendedfor use on solid/opaque gates. TheCBAC version is not recommendedfor use in high wind situations.* Positive Gate Stops, which limit gatetravel, are required in the opened andclosed positions.
Accessory Description Shipping Weight Voltage Part Number Price
Keyed Manual Release Required for all 760 installations Access from both 2 lb (.9 kg) 424597 $84sides of gate. Uses FAAC plastic triangular key.
Manual Release Key 1 lb (.45 kg) 713002 5
750/760 Extension Arm The arm is used when the 750 or 760 drive unit cannot 9 lb (4.1 kg) 738704 1132 piece be aligned with the pivot point of the gate leaf.
750/760 Extension Arm The arm is used when the 750 or 760 drive unit cannot 9 lb (4.1 kg) 2141 1133 piece be aligned with the pivot point of the gate leaf.
750/760 Extension Arm For alignment problems plus provides positive stops 10 lb (4.5 kg) 2142 239with positive stops 2 piece
760 Positive Stop Heavy Duty Shaft mounted stop 3 lb (1.4 kg) 2640 209
Photobeam Directional with diagonal alignment; 2 lb (1 kg) 785163 237required for UL-325 compliance.
Photobeam Mounting Foundation plate included 5 lb (2.2 kg) 401028/ 119Post: Standard 737630*
Photobeam Mounting Foundation plate included 9 lb (4.1 kg) 401035/ 192Post: Double 737630*
Photocell Set: also reguires 2 lb (1 kg) 785152 290Photocell Metal Housing or 3 lb (1.4 kg) 720089 43Photocell Plastic Housing 2 lb (1 kg) 720086 9
Receiver FAAC single channel 1 lb (.5 kg) 1RP418DS 77Transmitter FAAC single button 1 lb (.5 kg) 1TM418DS 44Transmitter FAAC two button 1 lb (.5 kg) 787317 51Antenna FAAC tuned antenna kit 2 lb (1 kg) 412003 85
Loop Detector DSP 15 1 lb (.5 kg) 2664 226Loop Detector DSP II; plugs in control panel backplate 1 lb (.5 kg) 2665 135Loop Detector DSP 10; plugs in control panel backplate & 1 lb (.5 kg) 2667 148
had sensitivity adjustment
Shadow Detector kit Includes one detector, base, and 1 lb (.5 kg) 115V 2665.1* 203relay for shadow loop 230V 2665.2* 203
Shadow Detector kit Includes one detector, base, and 1 lb (.5 kg) 115V 2667.1* 214(DSP 10) relay for shadow loop 230V 2667.2* 214
Mag Lock Relay Kit Includes base & relay for mag lock 24V ac 2352 48
Battery Backup BC Pro Single system backup 45 lb (16.8 kg) 115V 3520 1,753BC Pro Dual system backup 45 lb (16.8 kg) 115V 3522 1,988700i Single system backup 45 lb (16.8 kg) 230V 3521 1,753700i Dual system backup 45 lb (16.8 kg) 230V 3523 1,988
Control panel 455D (replacement only) 3 lb (1.4 kg) 115V 790919 709 230V 790926 709
455D w/ 14 x 16 in fiberglass, 26 lb (11.8kg) 115V 455D115F* 1,188hinged, lockable enclosure 230V 455D220F* 1,188
Transmitter 4 Channel Transmitter XT 443 RC 787453 22Receiver Receiver 433 RC plug In 787741 41
455D w/20x16 115V 455D115A* $1,422metal hinged enclosure 230V 455D230A* 1,422
You can upgrade from our 14 X16 pre-wired enclosure to our20 X16 metal pre-wired enclosure for only $250.00 grossmore.
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:11 AM Page 95
96
Model 760 In-Ground Hydraulic Swing Gate Operators
455 D Control Panel for use with FAAC Hydraulic Swing Gate Operators
Abbreviations:CBAC = hydraulic locking opened and closed; normal swing speedCBA/CBC = hydraulic locking in the closed/open position; normal swing speedSB = without hydraulic locking; normal swing speed
NOTE:All models listed can be converted to CBA, CBC or SB uponrequest.To simplify ordering the right 760 model that will work best for your application, you only need to answer one simple questions:
1. What is the maximum length of your gate leaf: < 8 ft (2.4 m) (CBAC) or > 9 ft (2.7 m) (SB)up to a max. of 13 ft (4 m)
The 455 D has the following functions and fea-tures:. Operates a single leaf or a bi-parting gate. Provides opening and closing "slow down,
soft stop" convenience
. Power supply: 115 VAC (+/- 10%) or 230 VAC (+6% -10%) 50-60 HZ)
. Absorbed power: 10W
. Motor max load: 800W
. Accessories max load: .5 amp
. Electric lock max load: 15 Va
. Operating temperature: -78oF to +131oF
. Protection fuses: .800 mA (accessories) 5 amp (motors)
. Operating logics:A (automatic): signal to open, gate closes automatically after selected timed pauseS (security): similar to A logic, useful in reducing tailgatingE (semi-automatic): garage door-like operation; signal to open, signal to closeEP (semi-automatic): similar to E logic, but second signal stops gate, third signal reverses gateB (manned, pulsed): designed for guard station use, requires 3-button switch (pulsed) to open, close and stop gateC (manned, constant): similar to B logic, but 3-button switch requires constant pressure on each button
. Opening/closing time: 0 to 120 seconds(programmable)
. Pause time: 0 to 4 minutes (programmable)
. Closing leaf delay: 0 to 4 minutes (programmable)
UL325
Programming LED display
Programming buttons
. Opening leaf display: 2 seconds (can be disabled)
. Torque: adjustable from 0 to 50 levels
. On board programming via push button (see circuit board photo this page)
. Panel also allows for the use of FAAC Gate Coders, for “real time” tracking of gate position
. Easy interconnection of actuating and reversing devices
. Open/Hold open function
CUSTOM PRE-WIRES AVAILABLEIdeal for complex applications like gated communities that require many peripherals.
Double Pre-wire: 24” H x 24” W x 10” D These enclosures areTriple Pre-wire: 24” H x 36” W x 12” D metal, hinged and lockable
. Everything the system needs fits into one box, including entry/exit (Double or Triple) and even battery back up (Triple only), eliminating multiple enclosures. Troubleshooting is simplified with everything in one box
For pricing information, call FAAC at 1-800-221-8278.
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:11 AM Page 96
97
FAAC Model BC Pro 1050 and Model 700i battery back-up units
Model BC Pro 1050 battery back-up
Model 760 In-Ground Hydraulic Swing Gate Operators
* Measurements and weights stated in this Price List are approximate and subject to change withoutnotice. For exact specifications, please refer to the Installation Manual or contact our technical depart-ment at 1-800-221-8278.
Ideal useage for the BC Pro and 700I battery backup systems: Fail safe(gates open during power outage and remain open until power is restored).Even if the power outage is prolonged and the batteries die, the gates willremain open to allow normal ingress and egress during the power outage.
Because the BC Pro and 700I battery backup systems run off the batteries,gate operation during a power outage is dependant upon the batteries beingwell conditioned and charged. If they are not, the voltage does not runthrough to the control panel being backed up. The battery backup systemdoes not shut down at all during a power outage, instead powering all periph-erals being backed up with our battery backup system. Thus, the moreperipherals used, the faster the batteries will die. Once the batteries do die,the gates will become inoperable and will stop at the position they were atwhen the batteries failed. Therefore, it is important to understand that the BCPro or 700I battery backup systems are not intended to work a Fail secureapplication (gates remain closed during power outage). Again, long termpower outages could result in the batteries failing at some point, possiblyleaving the gates either partially or fully open or closed.
Photocell Metal Housing
Entry Sytem Devices
Photocell Plastic Housing
Photocell Plastic Housing Dimensions: 2.5 in. high x 2.25 in. wide x 2.75 in. deep(6.4 cm x 5.7 cm x7 cm)
Photocell Metal HousingPowder coated steel.Dimensions: 2.5 in. high x 2.5 in. wide x 2.75 in. deep (6.4 cm x 6.4 cm x7 cm)
Specifications BC Pro 1050 700i
Size: 14 x 16 x 6 in. (35.6 x 40.6 x 15.2 cm)Weight: 45 lbs. (16.8 kg)Input/Output voltage: 115 VAC 230 VACInput/Output frequency: 60 Hz 50/60 HzOutput VA: 1050 700Output watts: 680 450Recharge rate to 90%: 2-4 hours
Maximum surge current: 36,000 amps 160**AC suppression joule/amp ratings
Low volt switch to battery: 94 VAC 190 VACMax amp. draw: 5 amp. 3 amp.
Shipping Weight: 45 lbs. (16.8 kg)Part Number: 3520 3521Price: $1,753 $1,753
Dual Configuration:Dual System Part Number: 3522 3523Price: $1,988 $1,988
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:11 AM Page 97
98
Standard Photocell Set
Standard Photocell SetDimensions: 2.75 in. wide x 2.75 in. high x 4 in. deep (7 cm x 7 cm x 10.2 cm) Depth measurement includeshousing. The Standard Photocell Set requires the follow-ing additional equipment (priced separately):Multi-Use Metal Housing, or Multi-Use Plastic Housing
Features:
Required power supply: 19 - 34 VDC or 15 - 25 VAC(available on FAAC control panels).
Output relay rating: 25 VAC, 0.1A
Output relay: N.O. (Normally Opened) and N.C. (Normally Closed)
Transmitter to receiver sensing provides reliable all-weath-er sensing
Range: 90 ft (27 m)
FAAC Photocell Systems
Model 760 In-Ground Hydraulic Swing Gate Operators
Mounting Post Footprint
FAAC Photobeam Systems
.Anodized aluminum
.Standard post: 22 in. high (57.5 cm)
.Double post (holds photobeam and control switch): 44 in. (111.5 cm)
NOTE: Photobeam sets require 2 posts
Features:
Photobeam Photocell SetDesigned for wall mounting or for mounting inspecial extruded aluminum mounting posts.
.Directional photocell with diagonal alignment
.Angle of detection: +- 4 degrees
.Range: 100 ft (30 m)
.Obstacle detection time: 10 ms
.Housing protection IP 54
.Required power supply: 24-35 VDC (available on FAAC control panels)
.Output relay rating: 100 MA/24VDC
.Output relay: N.O. (Normally Opened) and N.C. (Normally Closed)
.Receiver and Transmitter provide reliable all-weather sensing Dimensions: 2.75 in. x 3.75 in. x 1.75 in. (7 cm x 9.5 cm x 4.5 cm)
Features:
Photobeam Mounting Posts (Standard and Double)Photobeam Mounting Post and FoundationPlate for Photobeam Set
401035737630*
401028737630*
3.54 in.(9 cm)
2.38 in.(5.8 cm)
2.38 in.
(5.8
cm)
2.75 in.(7 cm)
4.5 in.
(11.5
cm)
3.75 in.
(9.5
cm)
Photobeam Set
Model Description Package Includes Shipping Part PriceWeight Number
Foundation plate included
Foundation plate included
5 lb (2.2 kg)
9 lb (4.1 kg)
Photobeam Mounting PostStandard
Photobeam Mounting PostDouble
401028/ 737630*
401035/737630*
$114
185
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:11 AM Page 98
99
Model 760 In-Ground Hydraulic Swing Gate Operators
Model 455D control panel
Detail of control panel schematic
Model 455D control panelTo simplify understanding of the new detector layout, the Model 455 D backplate is shown here with control panel, outlet switch, test button and appropriate terminal strips. Also shown are the new "free exit" and "safety"loop detector plug-in bases. These will come as diagramed with all enclo-sures.
The shadow loop detector can be added as an option. The shadow kit is comprised of another base, detector, and relay. These items are shown in the diagram within the bold, broken line section with instructions below.
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:11 AM Page 99
100
Visit us online atwww.faacusa.com
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:11 AM Page 100
101
Barrier Operators
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:11 AM Page 101
102
Barrier Gate Operators . . . . . . . . . . . . . 101Model 615 . . . . . . . . . . . . . . . . . . . . . . . 103Model 620 . . . . . . . . . . . . . . . . . . . . . . . 106Model 640 . . . . . . . . . . . . . . . . . . . . . . . 110
Barrier Gate Accessories . . . . . . . . . . . 114
Contents
Bar
rier
Oper
ator
s2006 Price List
FAAC Barrier Gate OperatorsMax lengthAluminum Beam
Cycles Per Hour
ModelApplication
Normal Traffic
High Traffic
150
ContinuousDuty
13 ft
13 ft23 ft
615
620640
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:11 AM Page 102
Model 615
Mod
el 6
15
Barrier Gate Operator
. Designed for light to moder-ate traffic applications
. Two year limited warranty (see back cover)
To guarantee the safety and efficiencyof its equipment, FAAC strongly recom-mends that qualified personnel test thesafety system on an annual basis, aswell as maintain the overall hydraulic ormechanical system.
103
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:11 AM Page 103
104
Features Common to All 615 Models
Hydraulic Locking Positions Opened & ClosedCabinet Weight (approx..) 100 lb (45.5 kg)Motor Horsepower 1/3 hpPower Supply 115 or 230 VAC
(-10% to +6%) 60 HzAmbient Operating -33oF to 165oF Temperature Range (-36oC to 74oC)
Operating Logics
The 455 D control panel operates the barrier for applications where automatic close is preferred; for most parking retrofit applications; and for preventing tailgating (S modes):
E = Garage door-like logic: signal to open, signal to close
A = Automatic logic: one signal opens the gate and closes it after a timed pause
S = Security logic: much like the A logic, useful in high traffic applications to counter tailgating
EP = (semi-automatic): similar to E logic, but second signal stops gate, third signal reverses gate.
B = (manned, pulsed): designed for guard station use, requires 3-button switch (pulsed) to open, close and stop gate
C = (manned, constant): similar to B logic, but 3-button switch requires constant pressure on each button
See the Model 455 D installation manual for a complete description of the panel’s logical operation.
Model 455 D Control Panel
The Model 615 barriers are designed for light tomoderate duty applications. Additional features include:. Price includes wood beam (see page 109). Adjustable hydraulic pressures to control swing. External key-operated manual release. Simple interface with revenue control systems. Powder coated steel cabinet. Versatile Model 455 D control panel . Quiet operation
All 615 Models require the following:. Assembly of the beam. Assembly of the beam’s counterbalancing system
(assembly determines right- or left-hand orientation)
FAAC Model 615 barrier gate operator
* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or contact our technical department at 1-800-221-8278.
40 in. (101.6 cm)
10.6 in.
(27 cm)
5.5 in. (14 cm)
Hydraulic Barrier Gate OperatorModel 615
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:11 AM Page 104
105
* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or contact our technical department at 1-800-221-8278 or 1-866-925-3222.
Please Note: When ordering, you need to specify the length andtype of beam you plan to install so that we can shipthe correct counterbalancing spring. Information onModel 615 wooden and aluminum beams can befound on page 109 of this Section. An optional (recommended) foundation plate is avail-able (see page 107).
Note: When ordering, please specify desired beam length
FYIBeams, because of their size, must be shipped bytruck. Freight charges for shipping can be asmuch or more than the cost of the beam. Pleaserequest a freight quote from FAAC to determinetotal costs.
Max BeamLength -Wooden
up to 10 ft (3 m)
Max Beam Length -Aluminum
up to 13 ft (4 m)
Speed toClear 90o
5 sec
CyclesPer Hour
150
Pump Size(liters)
1.5
Motor RPM
1400
Actual PumpOutput (liters)
1.5
Shipping Weight
100 lb (45.5 kg)
Control Panel
615 BPR
Model Voltage Part Number Price
615 BPR615 BPR
115V220V
20228125790281
$660$660
Model
615 Standard
Voltage
115 VAC230 VAC
Part Number
1049062104906
Price
$1,968$1,968
Hydraulic Barrier Gate OperatorsModel 615
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:11 AM Page 105
Model 620
Mod
el 6
20
Barrier Gate Operators
. Designed for moderate to heavy traffic applications
. Two year limited warranty (see back cover)
To guarantee the safety and efficiencyof its equipment, FAAC strongly recom-mends that qualified personnel test thesafety system on an annual basis, aswell as maintain the overall hydraulic ormechanical system.
106
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:11 AM Page 106
Barrier Gate Operators
Model 624 BLD Control Panel Operating Logics
E = Garage door-like logic: signal to open, signal to closeAs = Automatic logic: one signal opens the gate and closes it after a timed pause
. “A” logic can be set to function as an anti-tailgating logic
. With “pre-flashing” selected by the dip switches, the control panel acts typically like other FAAC panels
. Without “pre-flashing” selected, the control panel functions more like the “S” logic on other FAAC panels
P = For parking applications requiring separate open and close controls; useful in retrofitting parking barrier gate applications
R = Master/Slave
Left-hand installation, top view
Right-hand installation, top view
You must know the orientation of your barrier when ordering a Model 620.
The U.L. Listed Model 620 barrier gates are designedfor moderate to heavy duty applications.
The 620 is shipped with the Model 624 BLD controlpanel and has the following features:. Continuous duty operation. Adjustable hydraulic pressures. 4 different operating logics. Pre-assembled counterbalanced system. Automated fan cooling on all models. Pause time selections. Selectable warning light logic. Quiet operation. Fast opening time (2 sec. for 8.5 ft. beam). Built In loop detectors
Note: An optional (recommended) foundation plate, barrierbeams, and other accessories are sold separately (seepages 106-110). For information on articulated or skirtedbeam kits, see page 112.
FAAC Model 620 barrier gate operator
* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or contact our technical department at 1-800-221-8278 or 1-866-925-3222.
42.5 in. (108 cm)
13.75 in. (35
cm)6.69 in. (17 cm)
37.75 in.(101.6 cm)center ofbeam to grade
UL325
Please Note: When ordering, you need to specify the length andtype of beam you plan to install so that we can shipthe correct counterbalancing spring. Information onModel 620 wooden and aluminum beams can be foundon page 110 of this Section. An optional (recommended) foundation plate is available (see page 107).
The slave and relay card functions are now built in to the 624 BLD panel, alleviating theneed for the cards altogether.Plug in detectors available; DP2, (p/n 785599) with 2-channel capability, meaning only onedetector is needed to handle both free exit and safety
Model 620
107
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:11 AM Page 107
Model 620 Barrier Gate Operators
Model 620 Rapid 230 VAC. 100% duty cycle. includes Model 624 BLD control panel. automatic cooling fan. beam must be ordered separately (see page 110). articulated beam kit available (see page 112). built in loop detectors
Model 620 Rapid 115 VACWhile all configurations do not currently have part numbers assigned yet, all can beconverted from existing part numbers. Simply order the part number shown, if beamsize and left/right configuration are correct. Otherwise, order the 620 or 640 with desired beam length and designate left or right, and we will convert to a specific orientation.
N/A* part number has not been provided. Call FAAC for details. Left/right configuration can be changed White barrier springs can be changed toaccommodate the 10 ft. model
PartPart
Voltage Number Price Number Price
230 VAC 10463282 $3,922 10463283 $3,922230 VAC 10465282 $3,922 10465283 $3,922
230 VAC 10463382 $3,922 10463383 $3,922230 VAC 10465382 $3,922 10465383 $3,922
230 VAC 10463482 $3,922 10463483 $3,922230 VAC 10465482 $3,922 10465483 $3,922
230 VAC 10463582 $3,922 10463583 $3,922230 VAC 10465582 $3,922 10465583 $3,922
Orange cabinet White cabinet
Beam Length Beam LengthOrientation - Wood - Aluminum
Left Hand 6.5-10 ft (2-3 m) 6.5 ft (2 m)Right Hand 6.5-10 ft (2-3 m) 6.5 ft (2 m)
Left Hand 11-12 ft (3.4-3.7 m) 8.5 ft (2.6 m)Right Hand 11-12 ft (3.4-3.7 m) 8.5 ft (2.6 m)
Left Hand NA 9.75 ft (3 m)Right Hand NA 9.75 ft (3 m)
Left Hand NA 13 ft (3.9 m)Right Hand NA 13 ft (3.9 m)
Part PartVoltage Number Price Number Price115 VAC 104634821 $3,922 Contact FAAC $3,922115 VAC 104654821 $3,922 104654831 $3,922
115 VAC 104635821 $3,922 Contact FAAC $3,922115 VAC 104655821 $3,922 Contact FAAC $3,922
Orange cabinet White cabinetBeam Length Beam Length
Orientation - Wood - Aluminum
Left Hand N/A* 9.75 ft (3 m))Right Hand N/A* 9.75 ft (3 m)
Left Hand N/A* 13 ft (3.9 m)Right Hand N/A* 13 ft (3.9 m)
FYIBeams, because of their size, must beshipped by truck. Freight charges for ship-ping can be as much or more than the cost ofthe beam. Please request a freight quotefrom FAAC to determine total costs.
Speed to Maximum Pump Size Motor Actual Pump ShippingClear 90
oDuty Cycle (liters) RPM Output (liters) Weight
2.0 sec 100% 1.0 2800 2.0 170 lb (77.1 kg)2.0 sec 100% 1.0 1400 1.5 170 lb (77.1 kg)
Speed to Maximum Pump Size Motor Actual Pump ShippingClear 90
oDuty Cycle (liters) RPM Output (liters) Weight
2.0 sec 100% 1.0 1400 1.5 170 lb (77.1 kg)2.0 sec 100% 1.0 1400 1.5 170 lb (77.1 kg)
Control Panel (replacement)Description Part No. Price
624 BLD 230 VAC 63000395 $ 795624 BLD 115V 20227125 $ 795
Control Panel (replacement)Description Part Price
Number624 BLD 115 VAC 20227125 $ 795
Description PIN PriceDP2 2Channel 785599 $434
Plug-In Loop Detector
108
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:11 AM Page 108
Visit us online atwww.faacusa.com
109
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:11 AM Page 109
Model 640
Mod
el 6
40
Barrier Gate Operators
. Designed for high traffic applications
. Two year limited warranty (see back cover)
To guarantee the safety and efficiencyof its equipment, FAAC strongly recom-mends that qualified personnel test thesafety system on an annual basis, aswell as maintain the overall hydraulic ormechanical system.
110
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:11 AM Page 110
Model 640 Barrier Gate Operators
Model 624 BLD Control Panel Operating Logics
E = Garage door-like logic: signal to open, signal to closeAs = Automatic logic: one signal opens the gate and closes it after a timed pause
. “A” logic can be set to function as an anti-tailgating logic
. With “pre-flashing” selected by the dip switches, the control panel acts typically like other FAAC panels
. Without “pre-flashing” selected, the control panel functions more like the “S” logic on other FAAC panels
P = For parking applications requiring separate open and close controls; useful in retrofitting parking barrier gate applications
R = Master slave
The U.L. Listed Model 640 barrier gates are designedfor high traffic situations where longer beams areneeded.
The 640 is shipped with the Model 624 BLD controlpanel and has the following features:. Continuous duty operation. Adjustable hydraulic pressures to control swing. 4 different operating logics. Pre-assembled counterbalanced system. Automated fan cooling on all models. Pause time selections. Selectable warning light logic. Quiet operation. Built In loop detectorNote: An optional (recommended) foundation plate, emergency bypass solenoid, barrier beams, and other accessories are sold separately (see pages 106-110). Forinformation on articulated or skirted beam kits, see page 112.
FAAC Model 640 barrier gate operator
* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or contact our technical department at 1-800-221-8278 or 1-866-925-3222.
42.5 in. (108 cm)
15 in. (38cm)
6.69 in. (17 cm)
37.75 in.(101.6 cm)center ofbeam to grade
UL325
Please Note: When ordering, you need to specify the length and type ofbeam you plan to install so that we can ship the correct counterbalancing spring. Information on Model 640 woodenand aluminum beams can be found on page 107 of thisSection. An optional (recommended) foundation plate is vailable (seepage 111).
Left-hand installation, top view
Right-hand installation, top view
You must know the orientation of your barri-er when ordering a Model 640.
The slave and relay card functions are now built in to the 624 BLD panel, alleviating theneed for the cards altogether.
111
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:11 AM Page 111
Orange cabinet White cabinet ActualBeam Beam Pump Max.
Part Part Length Spring Length Speed to Size Motor Output Duty WeightOrientation Voltage Number Price Number Price - Wood Number - Aluminum Clear 90o (liters) RPM (liters) Cycle Shipping
Left Hand 115 VAC N/A* $4,315 N/A* $4,315 16 - 18 ft 13 ft (3.9 m) 5.5sec 1.5 1400 1.5 1.5 200 lb (90.7 kg)(4.8 - 5.4 m) 7210735
Right Hand 115 VAC N/A* $4,315 N/A* $4,315 16 - 18 ft 13 ft (3.9 m) 5.5sec 1.5 1400 1.5 1.5 200 lb (90.7 kg)(4.8 - 5.4 m)
Left Hand 115 VAC 104683821 $4,315 N/A* $4,315 18 - 20 ft 16 1/2 ft (5 m) 5.5 sec 1.5 1400 1.5 1.5 200 lb (90.7 kg)(4.8 - 6 m) 7210745
Right Hand 115 VAC N/A* $4,315 N/A* $4,315 18 - 20 ft 16 1/2 ft (5 m) 5.5 sec 1.5 1400 1.5 1.5 200 lb (90.7 kg)(4.8 - 6 m)
Left Hand 115 VAC N/A* $4,315 N/A* $4,315 N/A 7210755 20 ft (6 m) 8 sec 1.0 1400 1.0 1.0 200 lb (90.7 kg)Right Hand 115 VAC 104662821** $4,315 N/A* $4,315 N/A 20 ft (6 m) 8 sec 1.0 1400 1.0 1.0 200 lb (90.7 kg)
Left Hand 115 VAC 104685821 $4,315 N/A* $4,315 N/A 7210805 23 ft (7 m) 8 sec 1.0 1400 1400 1.0 200 lb (90.7 kg)Right Hand 115 VAC 104663821** $4,315 104663831 $4,315 N/A 23 ft (7 m) 8 sec 1.0 1400 1400 1.0 200 lb (90.7 kg)
FYIBeams, because of their size, must beshipped by truck. Freight charges for ship-ping can be as much or more than the cost ofthe beam. Please request a freight quotefrom FAAC to determine total costs.
Model 640 230VAC. 100% duty cycle. includes Model 624 BLD control panel. automatic cooling fan. beam must be ordered separately (see page 111). skirt beam kit available (see page 112)
Model 640 115 VACWhile all configurations do not currently have part numbers assigned yet, all can be converted from existing part numbers.Simply order the part number shown, if beam size and left/right configuration are correct. Otherwise, order the 620 or 640with desired beam length and designate left or right, and we will convert to a specific orientation.
* Measurements and weights stated in this Price List are approximate. For exact specifications, pleaserefer to the Installation Manual or contact our technical department at 1-866-925-322.
UL325
N/A* part number has not been provided. Call FAAC for details. Springs can be modified toaccommodate all models (white & orange). Configurations can be modified on all models.
Part PartVoltage Number Price Number Price
230 VAC 10468282 $4,315 10468283 $4,315230 VAC 10466082 $4,315 10466083 $4,315
230 VAC 10468382 $4,315 10468383 $4,315230 VAC 10466182 $4,315 10466183 $4,315
230 VAC 10468482 $4,315 10468483 $4,315230 VAC 10466282 $4,315 10466283 $4,315
230 VAC 10468582 $4,315 10468583 $4,315230 VAC 10466382 $4,315 10466383 $4,315
Orange cabinet White cabinet ActualBeam Beam Pump Pump Max.Length Spring Length Speed to Size Motor Output Duty Weight
Orientation- Wood Number Aluminum Clear 90o (liters) RPM (liters) Cycle Shipping
Left Hand 16 ft (4.9 m) 7210735 13 ft (3.9 m) 4.0 sec 1.0 2800 2.0 100% 200 lb (90.7 kg.)Right Hand 16 ft (4.9 m) 13 ft (3.9 m) 4.0 sec 1.0 2800 2.0 100% 200 lb (90.7 kg.)
Left Hand 18 ft (5.5 m) 7210745 16.5 ft (5 m) 5.5 sec 1.5 1400 1.5 100% 200 lb (90.7 kg.)Right Hand 18 ft (5.5 m) 16.5 ft (5 m) 5.5 sec 1.5 1400 1.5 100% 200 lb (90.7 kg.)
Left Hand 20 ft (5.5 m) 7210755 20 ft (6 m) 8 sec 1.0 1400 1.0 100% 200 lb (90.7 kg.)Right Hand 20 ft (5.5 m) 20 ft (6 m) 8 sec 1.0 1400 1.0 100% 200 lb (90.7 kg.)
Left Hand NA 7210805 23 ft (7 m) 8 sec 1.0 1400 1.0 100% 200 lb (90.7 kg.)Right Hand NA 23 ft (7 m) 8 sec 1.0 1400 1.0 100% 200 lb (90.7 kg.)
Model 640 Barrier Gate Operators
Control Panel (replacement)Description Part No. Price
624 BLD 115 VAC 20227125 $ 795
Description PIN PriceDP2 2Channel 785599 $434
Plug-In Loop Detector
Control Panel (replacement)Description Part No. Price
624 BLD 230 VAC 63000395 $ 795624 BLD 115V 20227125 $ 795
112
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:12 AM Page 112
Visit us online atwww.faacusa.com
113
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:12 AM Page 113
Contents
Bar
rier
Acc
esso
ries
Barrier Gate Operators
NOTE:The following accessories are specificto barrier operators only.
Other accessories that work with alltypes of FAAC operators, such as safe-ty devices, access control systems,etc., are listed in the GeneralAccessories Section, page 122.
To guarantee the safety and efficiency of its equipment, FAAC strongly recommends that qualified personnel test the safety system on an annual basis, as well as maintain the overall hydraulic or mechanical system.
114
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:12 AM Page 114
* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or contact our technical department at 1-800-221-8278 or 1-866-925-3222.
FYIBeams, because of their size, must beshipped by truck. Freight charges for ship-ping can be as much or more than the cost ofthe beam. Please request a freight quotefrom FAAC to determine total costs.
1. 620 Foundation PlateThe plate measures 14 in. x 7.86 in., has 4 holes foranchoring bolts, and has a hole for electrical conduits.
2. 615 Foundation PlateThe plate measures 12 in. x 12 in., has 4 holes for anchoring bolts, and has a hole for electrical conduits.
SHIPPING WEIGHT 9 lb (4.1 kg)PART NUMBER 2556PRICE: $180
SHIPPING WEIGHT 10 lb (4.5 kg)PART NUMBER 2277PRICE: $240
3. 640 Foundation PlateThe plate measures 15.25 in. x 9 in., has 4 holes foranchoring bolts, and has a hole for electrical conduits.
4. Anti-Vandalism Valve Protects the integrity of the hydraulic system in the event the beam is forced
SHIPPING WEIGHT 14 lb (6.4 kg)PART NUMBER 2697PRICE: $285
SHIPPING WEIGHT 3 lb (1.4 kg)PART NUMBER 401066PRICE: $422
Barrier Gate AccessoriesAccessories
115
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:12 AM Page 115
116
* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or contact our technical department at 1-800-221-8278 or 1-866-925-3222.
FYIBeams, because of their size, must beshipped by truck. Freight charges for ship-ping can be as much or more than the cost ofthe beam. Please request a freight quotefrom FAAC to determine total costs.
5. 624 Slave Card The optional slave card enables two opposing barriers to operate simultaneously.
NOTE: Replacements for barriers with an MPS board
6. 624 FSW CardThe optional FSW card enables safety devices to work when a 620/640 barrier is operating in the P (parking) mode.NOTE: Replacements for barriers with an MPS board.
SHIPPING WEIGHT 1 lb (.5 kg)PART NUMBER 790847PRICE: $130
SHIPPING WEIGHT 1 lb (.5kg)PART NUMBER 790846PRICE: $130
7. 624 Relay CardThe optional relay card provides 6 normally open electrical contacts for connecting auxiliary equipment(computer controls, revenue equipment, alarms, etc.) or monitoring the barrier’s status.
NOTE: Replacements for barriers with an MPS board
8. Hinged Breakaway System (with sensor kit)For use with round beams on the Model 620 barrier.
SHIPPING WEIGHTPART NUMBER 428163*PRICE: $930
SHIPPING WEIGHT 1 lb (.5 kg)PART NUMBER 360013PRICE: $329
Barrier Gate AccessoriesAccessories
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:12 AM Page 116
117
* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or contact our technical department at 1-800-221-8278 or 1-866-925-3222.
FYIBeams, because of their size, must be shipped bytruck. Freight charges for shipping can be asmuch or more than the cost of the beam. Pleaserequest a freight quote from FAAC to determinetotal costs.
FYIAluminum beams ordered with a barrier will beshipped with appropriate fixing bracket; woodbeams ordered with a barrier will be shipped withsandwich plate. Beams ordered separately will beassumed to be replacement beams only & will notincluded fixing or sandwich hardware unlessrequested.
9. 615 Aluminum Beam KitThese aluminum beams come with a fixing bracketand are optional for new applications. All aluminumbeams measure 1 in. x 4 in. x length of beamordered. (Length of the 615 beams must be 6 ft. thru13 ft. only.)
6 Foot (1.8 m) Length
8 Foot (2.4 m) Length
10 Foot (3 m) Length
13 Foot (4 m) Length SHIPPING WEIGHT 19.5 lbsPART NUMBER 428090PRICE: $490
SHIPPING WEIGHT 15 lbsPART NUMBER 428089PRICE: $427
SHIPPING WEIGHT 12 lbsPART NUMBER 428088PRICE: $383
SHIPPING WEIGHT 10lbsPART NUMBER 428087PRICE: $300
10. 615 Wooden Beam KitsThese beam kit numbers are to be used when order-ing with a 615 barrier and include the sandwich plate.If ordered separately the cost of the sandwich platewill be added to the price.
8 Foot (2.4 m) Length
10 Foot (3 m) Length SHIPPING WEIGHT 8lbsPART NUMBER 2038PRICE: $248
SHIPPING WEIGHT 7lbsPART NUMBER 2146PRICE: $236
Barrier Gate AccessoriesAccessories
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:12 AM Page 117
118
REPLACING OLDER BEAMSWhen replacing beams on 620 barriers older thana 10/05 serial #, the fixing bracket will have to bereplaced (part#:428342) and an adapter will beneeded (part#:390265)
* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or contact our technical department at 1-800-221-8278 or 1-866-925-3222.
FYIBeams, because of their size, must be shipped bytruck. Freight charges for shipping can be asmuch or more than the cost of the beam. Pleaserequest a freight quote from FAAC to determinetotal costs.
FYIAluminum beams ordered with a barrier will beshipped with appropriate fixing bracket; woodbeams ordered with a barrier will be shipped withsandwich plate. Beams ordered separately will beassumed to be replacement beams only & will notincluded fixing or sandwich hardware unlessrequested.
11. 620 Aluminum BeamsAll 620 rectangular aluminum beams measure 1 in. x 4 in. x the length of the beam ordered. For skirted or articulated beams order the length beamneeded and the skirt kit or articulated beam kit. (See page 112 of this section)
6 Foot (1.8 m) Length Rectangular Round
8 Foot (2.4 m) Length Rectangular Round
10 Foot (3 m) Length Rectangular Round
13 Foot (4 m) Length Rectangular Round
10 Foot (3 m) Length Round Drilled for Breakaway
SHIPPING WEIGHT 19.5 lbs 19.5 lbsPART NUMBER 428090 428079PRICE $490 $ 490
SHIPPING WEIGHT 15 lbs 15 lbsPART NUMBER 428089 428075PRICE $427 $427
SHIPPING WEIGHT 12 lbs 12 lbsPART NUMBER 428088 428078PRICE $383 $383
SHIPPING WEIGHT 10 lbsPART NUMBER 428087 NAPRICE $300
SHIPPING WEIGHT 15 lbsPART NUMBER 428176PRICE $520
12. 620 Wooden Beam All 620 wood beams are made of clear redwood andmeasure 1 in. x 4 in. x the length of the beamordered.
8 Foot (2.4 m) Length
10 Foot (3 m) Length
12 Foot (3.7 m) LengthSHIPPING WEIGHT 9 lbsPART NUMBER 2039PRICE: $279
SHIPPING WEIGHT 8 lbsPART NUMBER 2038PRICE: $248
SHIPPING WEIGHT 7 lbsPART NUMBER 2146PRICE $236
Barrier Gate AccessoriesAccessories
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:12 AM Page 118
119
* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or contact our technical department at 1-800-221-8278 or 1-866-925-3222.
FYIBeams, because of their size, must be shipped bytruck. Freight charges for shipping can be asmuch or more than the cost of the beam. Pleaserequest a freight quote from FAAC to determinetotal costs.
FYIAluminum beams ordered with a barrier will beshipped with appropriate fixing bracket; woodbeams ordered with a barrier will be shipped withsandwich plate. Beams ordered separately will beassumed to be replacement beams only & will notincluded fixing or sandwich hardware unlessrequested.
13. 640 Aluminum BeamAll 640 rectangular aluminum beams measure 2 in. x 4 in. x length of beam order. For the skirtedbeams order the aluminum beam and the skirted beam kit. (See page 112 of this section)
13' (4m) Length Rectangular Round
16' (4.9m) Length Rectangular Round
20' (3m) Length Rectangular Round
23' (7m) Length Rectangular RoundSHIPPING WEIGHT 36 lbsPART NUMBER 428064 NAPRICE $795
SHIPPING WEIGHT 30 lbsPART NUMBER 428063 NAPRICE $677
SHIPPING WEIGHT 28 lbsPART NUMBER 428062 NAPRICE $575
SHIPPING WEIGHT 22 lbsPART NUMBER 428061 NAPRICE $516
14. 640 Wood Beam All 640 wooden beams are made of clear redwood anmeasured 2 in. x 6 in. x length of beam ordered.
16' (4.9m) Length
18' (2.5m) Length
20' (3m) LengthSHIPPING WEIGHT 32 lbsPART NUMBER 2043PRICE $571
SHIPPING WEIGHT 26 lbsPART NUMBER 2418PRICE $549
SHIPPING WEIGHT 22 lbsPART NUMBER 2410PRICE $531
Barrier Gate AccessoriesAccessories
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:12 AM Page 119
Articulated Beam
Skirted Beam(comes assembled,
ready to attach to beam)
* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or contact our technical department at 1-800-221-8278 or 1-866-925-3222.
15. Articulated Beam KitsArticulated beams are used in parking garages orother applications with low overhead clearances. Inaddition to ordering a rectangular aluminum beam foryour Model 620 barrier, you need to order this kit.The kit will handle a maximum 9 ft ceiling height.FAAC will articulate the beam for you. Supply us, inwriting, the distance between the base of the barriercabinet and the ceiling. You can print this form andsend us the infomation required.
16. Skirted Beam KitsA skirted beam keeps vehicles from passing under abarrier beam and consists of a rectangular aluminumbeam (ordered separately) and one or more kits forskirting the beam. Each kit is a series of interlocking,jointed metal pieces forming a framework you attachto the bottom of the beam. When the beam raises,gravity causes the skirting to collapse against the ver-tical beam.If you are retrofitting the skirt to an existing beam,call us about whether you need a different compres-sion spring for your operator.Order a combination of kits whose combined length is 1 foot shorter than the length of your rectangular aluminum beam:. One kit contains mounting hardware and the metalskirt that is about 6 feet (more precisely, 2 meters)long. The kit will work with Models 620 and 640 barri-ers.. The other kit contains mounting hardware and themetal skirt that is about 10 feet (more precisely, 3meters) long. The kit will work with Models 620 and640 barriers.
6 Foot (2 m) Skirt Kit
10 Foot (3 m) Skirt KitSHIPPING WEIGHT 10 lb (4.5 kg)PART NUMBER 4282441PRICE: $718
SHIPPING WEIGHT 5 lb (2.3 kg)PART NUMBER 4282431PRICE: $501
SHIPPING WEIGHT 15 lb (6.8 kg)PART NUMBER 428137PRICE: $815
120
Barrier Gate AccessoriesAccessories
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:12 AM Page 120
121
Slide Gate Operators
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:12 AM Page 121
122
FAAC Swing and Slide Gate OperatorsSwing Model
Cycles Per Hour
SlideModel
Application
Single family,Low Traffic
Single family,ModerateTraffic
High Traffic
30
30
ContinuousDuty
412/402/422750/760
402/422750/760
400
740746
746844
844
Slide Gate Operators . . . . . . . . . . . . . . . 121Model 746 . . . . . . . . . . . . . . . . . . . . . . . 125Model 844 . . . . . . . . . . . . . . . . . . . . . . . 126Model 740 . . . . . . . . . . . . . . . . . . . . . . . 128
Contents
Slid
e Oper
ator
s
2006 Price List
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:12 AM Page 122
123
Example of a Complete Slide Gate System
12
3
4
5
5
6
7 7
8
The slide gate operator automates the gate and is available with chain or rack and pinion drive:
.Chain offers easy installation
.Rack and pinion offers elegant, low maintenance and improved security
The U.L. Listed weather resistant accessory interface box houses the control panel for the operator and its accessories
Photobeam sets help prevent entrapment between the sliding gate leaf and another object by using the safety logic of the control panel.
The warning light alerts anyone near the gate of its movement and can light the gateway.
The mounting pedestal provides a platform for mounting the operator.
Vehicle sensors (inductive loops) activate the operator to prevent the gate from closing on a vehicle. Talk to our sales staff about whether your installation requires a safety, free exit, and/or closing (security) loop.
Activating switches allow the opening or closing of the gate. The switch may be activated by the following:
.Key
.Card
.Keyboard code
The antenna for the radio receiver and transmitter allowsremote control of the gate.
1
2
3
4
5
6
7
8
No. Description More Information
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:12 AM Page 123
124
Slide
Mod
els 746
and
844
Slide Gate Operators
. Designed for residential andlight commercial applications
. Two year limited warranty (see back cover)
FAAC operators for sliding gates are among the safest available. The anti-entrapment and security protectionprovided by all gate operators can andshould be improved with photocells, loop detectors, sensing edges and/orother similar devices. FAAC strongly recommends that devices such asthese be installed with all automatedgate systems.
To guarantee the safety and efficiency of its equipment, FAAC strongly recommends that qualified personnel test the safety system on an annual basis, as well as maintain the overallhydraulic or mechanical system.
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:12 AM Page 124
125
* Maximum Gate Length is limited by the Pulling Force requirement and the 746’s maximum motor run time of two minutes.* Note: Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or contact our technical department at 1-800-221-8278 or 1-866-925-3222.
* The anti-entrapment protection and security protection provided by the 746 can and should be improved with photocells, loop detectors, sensing edges and/or other similar devices. FAAC strongly recommends that devices such as these be installed with all automated gate systems.
Model 746 Slide Gate OperatorsFeatures include:• 230 VAC• External limits• Manual release • “Soft Stop” on opening and closing• 1/2 hp motor• Pulling force: 35 lb (16 kg)• Speed: 50 ft/min (12 m/min)• Gate Weight: 1,400 lb (636 kg)• Duty cycle: 70% motor run time• Microprocessor control: choose from 6 operating logics:
A (automatic): signal to open; signal to closeS (security): similar to A logic, useful in reducing tailgatingE (semi-automatic): garage door-like operation; signal to open, signal to closeEP (semi-automatic) similar to E logic but second signal stops gate, third signal reverses gateB (manned, pulsed): designed for guard station use, requires 3-button switch (pulsed) to open, close and stop gateC (manned, constant): similar to B logic but 3-button switch requires constant pressure on each button
• Plus - push-button programmable - reverse on contact (programmable on and off) - built-in cycle counter
Model Package Includes Weight Voltage Number Price
746 – Chain One operator, 780D control panel,16 or 20 tooth sprocket, 50 lb (22.7 kg) 230 VAC 109775 $1,669protective cover, limit switch plates, mounting angle brackets, chain-to-gate mounting hardware with nickelplated master links, warning signsNote: Chain is not included (see charts below)
746 – Rack & Pinion One operator, 780Dcontrol panel, 20 tooth pinion, 44 lb (20 kg) 230 VAC 109773 $1,669mounting angle brackets and limit switch platesNote: Rack is not included (see charts below)
Accessory Description Shipping Weight Part Number Price
Nickel Chain Two master links shipped with each length .5 lb/ft (.2 kg) 2000 $7/ft of chain. Sold in 10 ft lengths only.
Stainless Steel Chain “ .5 lb/ft (.2 kg) 2002 $20/ft
Gear Rack Galvanized steel rack is 3.28 ft long, works with 6 lb (2.7 kg) 490122 $58 per any FAAC slider, comes with rack-to-gate hardware per section section
Foundation Plate For ground level mounting, is 6 x 10.5 in., 6 lb (2.7 kg) 2278 $84comes with rebar anchors
Mounting Pedestal For elevated mounting, 18 in. galvanized 18 lb (8.2 kg) 2411 $249
Photobeam Directional with diagonal alignment; 2 lb (1 kg) 785163 $237required for UL-325 compliance.
Receiver FAAC single channel 1 lb (.5 kg) 1RP418DS $77Transmitter FAAC single button 1 lb (.5 kg) 1TM418DS $44Transmitter FAAC two button 1 lb (.5 kg) 787317 $51Antenna FAAC tuned antenna kit 2 lb (1 kg) 412003 $85
Control Panel (replacement) Model 780 D 2 lb (.9 kg) 7909212 $635 Control Panel (replacement) Adapter Kit Replacement (w/ 780D board & access) 3 lb (.9 kg) 490114 $653
Sprockets (replacement) Z16 – pin shaft 719137 $85 (No charge when ordered with operator only)
Z20 – pin shaft 719135 $93(No charge when ordered with operator only)
Transmitter 4 Channel Transmitter XT 4433 RC 787453 $22Receiver Receiver 433 RC Plug In 787741 $41
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:12 AM Page 125
Features include:• 230 VAC - Chain and Rack & Pinion• 115V - Rack & Pinion only• External limits• Manual release • “Soft Stop” on opening and closing• 3/4 hp motor• Oil immersed clutch which, when properly adjusted, limits the amount of pressure the operator can apply to
moving the gate• Pulling force: 100 lb (45 kg)• Speed: 50 ft/min (12 m/min)• Gate Weight: 4,000 lb (1818 kg)• Duty cycle: 70% motor run time• Microprocessor control: choose from 6 operating logics:
A (automatic): signal to open; signal to closeS (security): similar to A logic, useful in reducing tailgatingE (semi-automatic): garage door-like operation; signal to open, signal to closeEP (semi-automatic) similar to E logic but second signal stops gate, third signal reverses gate
B (manned, pulsed): designed for guard station use, requires 3-button switch (pulsed) to open, close and stop gateC (manned, constant): similar to B logic but 3-button switch requires constant pressure on each button• Plus - push-button programmable - reverse on contact (programmable on and off) - built-in cycle counter
Model 844
Maximum Gate Length is limited by the Pulling Force requirement and the 844’s maximum motor run time of four minutes.* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or
contact our technical department at 1-800-221-8278 or 1-866-925-3222.
Model Package Includes Weight Voltage Number Price
844 – Chain One operator, 780 D control panel, 16 or 20 tooth sprocket, protective cover, limit switch 43 lb (20 kg) 230 VAC 109902 $2,176plates, mounting angle brackets, chain-to-gate mounting hardware with nickelplatedmaster links. Note: Chain is not included (see charts below)
844 – Rack & Pinion One operator, 780 D control panel, 16 tooth pinion, mounting angle brackets and 43 lb (20 kg) 230 VAC 109837 $2,176limit switch plates. Note: Rack is not included (see charts below) 43 lb (20 kg) 115 VAC 1098372 $2,176
Slide Gate Operators with Oil Immersed Clutch
Accessory Description Shipping Weight Part Number Price
Nickel Chain Two master links shipped with each length of chain. .5 lb/ft (.2 kg) 2000 $7/ft Sold in 10 ft lengths only.
Stainless Steel Chain “ .5 lb/ft (.2 kg) 2002 $20/ft
Gear Rack Galvanized steel rack is 3.28 ft long, works with any FAAC 6 lb (2.7 kg) 490122 $58 per slider and comes with rack-to-gate hardware per section section
Foundation Plate For ground level mounting, is 6 x 10.5 in., comes with 6 lb (2.7 kg) 2278 $84rebar anchors to set in concrete pad
Mounting Pedestal For elevated mounting, 18 in. galvanized 21 lb (9.5 kg) 2411 $249
Photobeam Directional with diagonal alignment; 2 lb (1 kg) 785163 $237required for UL-325 compliance.
Receiver FAAC single channel 1 lb (.5 kg) 1RP418DS $77Transmitter FAAC single button 1 lb (.5 kg) 1TM418DS $43Transmitter FAAC two button 1 lb (.5 kg) 787317 $51Antenna FAAC tuned antenna kit 2 lb (1 kg) 412003 $85
Control Panel (replacement) Model 780 D 115V 2 lbs 79092112 $635 Control Panel (replacement) Model 780 D 230V 2 lbs 7909212 $635 Control Panel (replacement) Adapter Kit Replacement (w/780D board & access) 230V 3 lbs 490114 $653
Sprockets (replacement only) Z16 – pin shaft 719137 $85(No charge when ordered with operator only)
Z20 – pin shaft 719135 $93(No charge when ordered with operator only)
Transmitter 4 Channel Transmitter XT 4433 RC 787453 $22Receiver Receiver 433 RC Plug In 787741 $41
126
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:12 AM Page 126
Visit us online atwww.faacusa.com
127
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:12 AM Page 127
Mod
el 7
40
FAAC operators for sliding gates are amongthe safest available. The anti-entrapmentand safety provided by all gate operators canand should be improved with photocells, loop detectors, sensing edges and/or other similardevices. FAAC strongly recommends thatdevices such as these be installed with all automated gate systems.
To guarantee the safety and efficiency of itsequipment, FAAC strongly recommends thatqualified personnel test the safety system onan annual basis, as well as maintain theoverall hydraulic or mechanical system.
Slide Gate OperatorModel 740
.Designed for residential use
. Two year limited warranty(see back cover)
128
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:12 AM Page 128
Model 740 Slide Gate Operator
Model 740 (24 volt)
The Model 740 was designed as a rack & pin-ion operator for residential applications usinga gate weighing a maximum of 880 pounds.
. Gate automatically locks when not operating
. Slow down “soft stop” on opening and closing
. Operates even in case of power failure (subject to battery condition)
. External limits
. Convenient manual release
Model
Model 740 Single Basic Kit (no peripherals)
724D Control Panel (replacement only)
Gear Rack (3.28 ft) (Nylon)
Battery Back-up Kit
Battery
Shipping Wt(approx.)
30lb. (13.6 kg)
2 lb (.9 kg)
1 lb (.45 kg)
Voltage
24vdc(Transformer)
12vdc
12vdc
Part Number
10978021
790939
4901204
390901
3633
Price
$1,182
$675
$58
$150
$66
Kit Includes
1 Operator, 1 Control Panel,Transformer, Foundation plate (12” x 7”)
To add battery function to your system,kit includes: 2 batteries (1.2 amp hour) wiring cable, support bracket (fits insidecover)
1.2 amp hour (replacement only)
Specifications (Rack & Pinion configuration only)Voltage Primary: 115 VAC
Secondary: 24vdc (100va transformer)
Duty Cycle 100%
Maximum weight per gate leaf 880 lb (399 kg)
Maximum length per gate leaf 30 ft (9.1 m)
Absorbed power/absorbed current 70 W/3 A
Approx. operating temperature range -4°F to 131°F (-20°C to 55°C)
NOTE: Operator specifications are approximate. Environmental factors can change the preformance of the operator.
NOTE: Due to the size of the Model 740 transformer, it requires: (A) a separate enclosure with electrical outlet mounted at the gate site (see accessory below) or (B) the gatesystem is plugged into an electrical outlet INSIDE the residence.
129
Low Voltage
Photobeam 785163 $237
Transmitter 4 Channel transmitter XT 4433 RC 787453 $22Receiver Receiver 433 RC Plug In 787741 $41
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:12 AM Page 129
130
Visit us online atwww.faacusa.com
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:12 AM Page 130
131
Accessories
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:12 AM Page 131
132
Contents
Acc
esso
ries
Accessories
To guarantee the safety and efficiency of its equipment, FAAC strongly recommends that qualified personnel test the safety system on an annualbasis, as well as maintain the overallhydraulic or mechanical system.
Two Year Limited Warranty on thoseaccessories manufactured by FAAC
(see back cover).
Barrier Gate Accessories. . . . . . . . 133-135
Entry Systems and Devices . . . . . . 136-148Switches . . . . . . . . . . . . . . . . . . . . . . . . 137Telephone Entry Systems . . . . . . . 138-139Radio Controlled Systems. . . . . . . . . . . 140Loops and Loop Detectors . . . . . . . 141-145Locks . . . . . . . . . . . . . . . . . . . . . . . 146-148Warning Lights. . . . . . . . . . . . . . . . . . . . 148
Electrical & Hardware . . . . . . . . . . 149-152Timers . . . . . . . . . . . . . . . . . . . . . . . . . . 149Ditek Surge Protection . . . . . . . . . . . . . 150Control Panel Enclosures. . . . . . . . 151-152
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:12 AM Page 132
133
DigiKeyboard
* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or contact our technical department at 1-800-221-8278 or 1-866-925-3222.
17. DigiKeyboardEntering a 4 digit combination on the 9 button keyboard actuates the gate. May be programmed to one of 4,095 combinations.
Features:.Required power supply: 24 VDC (available on FAAC control panels.).Indoor or outdoor use.For use with A, E, and S FAAC control panel logics:
A = automatic logic: signal to open; gate closes automatically after timed pauseE = garage door-like logic: signal to open; signal to
closeS1 = security logic: similar to A logic, useful in reducing tailgating
Dimensions:2.75 in. high x 2.75 in. wide x 3.43 in deep (7 cm x 7 cm x 8.7 cm). Depth measurement includes housing.
The DigiKeyboard requires the following additional equipment (priced separately):
.Metal Housing (see #20 this section), Plastic Housing (see #21 this section), or Mounting Post Kit (see page 51).DS Decoder , (formerly called the MD01) (see #19 this section)
18. DS Decoder (formerly MD01)This is the "brain" behind the DigiCard andDigiKeyboard Systems.Dip switches provide for code selection. More than one DS Decoder
may be used if multiple codes are desired.Features:
.Required power supply: 24 VDC (available on FAAC control panels.).Plugs into 455 D control panel
SHIPPING WEIGHT 2 lb (1 kg)PART NUMBER 785502PRICE: $129
SHIPPING WEIGHT 1 lb (.5 kg)PART NUMBER 404005PRICE: $413 each
401034737630*
Features:.Anodized aluminum..Double post (holds Digikey ): 44 in. (111.5 cm)
3.54 in.(9 cm)
2.38 in.(5.8 cm)
2.38 in.
(5.8
cm)
2.75 in.(7 cm)
4.5 in.
(11.5
cm)
3.75 in.
(9.5
cm)
Mounting Post Footprint
SHIPPING WEIGHT 9 lb PART NUMBER 401034/737630*PRICE: $192
Double Mounting Post for Digikey
DS Decoder(formerly MD01)
Barrier Gate AccessoriesAccessories
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:12 AM Page 133
134
19. Metal Housing for DigiCard Reader & DigiKeyboard
Painted mild steel. Dimensions: 2.75 in. high x 2.75 in. wide x 2.25 in. deep (7cm x 7 cm x 5.7 cm)
20. Plastic Housing for DigiCard Reader & DigiKeyboard
Dimensions: 2.75 in. high x 2.75 in. wide x 2.25 in. deep (7cm x 7 cm x 5.7 cm)
21. T10 Key SwitchFeatures:.Switch rating: 250 VAC; 10 amps.Indoor or outdoor use.Key returns when released.N.O. (Normally Opened) and N.C. (Normally Closed) ConnectionFor use with A, E, and S FAAC control panel logics:A = automatic logic: signal to open; gate closes automatically after timed pauseE = garage door-like logic: signal to open; signal to closeS1 = security logic: similar to A logic, useful in reducing tailgatingDimensions: 2.75 in. high x 2.75 in. wide x 4 in. deep (7 cm x 7 cm x 10.2 cm) Depth measurement includes housing.The T-10 Key Switch requires the following additional equipment (priced separately):.Metal housing (see #25 this section) or Plastic Housing (see #26 this section)
SHIPPING WEIGHT 2 lb (1 kg)PART NUMBER 401010036PRICE: $105
SHIPPING WEIGHT 2 lb (1 kg)PART NUMBER 720043PRICE: $15
SHIPPING WEIGHT 3 lb (1.4 kg)PART NUMBER 720037PRICE $43 Metal Housing for
DigiCard Reader &DigiKeyboard
Plastic Housing forDigiCard Reader &DigiKeyboard
* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or contact our technical department at 1-800-221-8278 or 1-866-925-3222.
T10 Key Switch
Barrier Gate AccessoriesAccessories
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:12 AM Page 134
135
T-10E Key Switch
* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or contact our technical department at 1-800-221-8278 or 1-866-925-3222.
22. T-10E Key SwitchFeatures:.Switch rating: 250 VAC; 10 amps.Indoor or outdoor use.Key returns when released.N.O. (Normally Opened) and N.C. (Normally Closed) ConnectionFor use with A, E, and S FAAC control panel logics:A = automatic logic: signal to open; gate closes automatically after timed pauseE = garage door-like logic: signal to open; signal tocloseS1 = security logic: similar to A logic, useful in reducing tailgatingDimensions: 3.75 in. high x 2.75 in. wide x 1.75 in. deep (9.5 cm x 7 cm x 4.5 cm) .Classy brushed aluminum look.Designed to fit into the popular FAAC brushed aluminumphotobeam stand (See p. 67 of the Price List)
SHIPPING WEIGHT 2 lb (1 kg)PART NUMBER 401019036PRICE: $109
Barrier Gate AccessoriesAccessories
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:12 AM Page 135
Multi-Use Plastic Housing
Multi-Use Metal Housing
* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or contact our technical department at 1-800-221-8278 or 1-866-925-3222.
23. Multi-Use Metal Housing (For T-10 Key Switch, Two Button FAAC Switch, andsome photocells)Powder coated steel.Dimensions: 2.5 in. high x 2.5 in. wide x 2.75 in. deep(6.4 cm x 6.4 cm x7 cm)
24. Multi-Use Plastic Housing (For T-10 Key Switch, Two Button FAAC Switch, andsome photocells)Dimensions: 2.5 in. high x 2.25 in. wide x 2.75 in. deep(6.4 cm x 5.7 cm x7 cm)
SHIPPING WEIGHT 1 lb (.5 kg)PART NUMBER 720086PRICE: $9
SHIPPING WEIGHT 3 lb (1.4 kg)PART NUMBER 720089PRICE: $43
136
Entry Systems and Security DevicesAccessories
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:12 AM Page 136
Two-Button Switch
Three-Button Switch
* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or contact our technical department at 1-800-221-8278 or 1-866-925-3222.
25.Two-Button SwitchFeatures:.Switch rating: 250 VAC; 10 amps.Indoor or outdoor use.Painted aluminum.Surface mounted.Actuate button is N.O. (Normally Opened).Stop button is N.C. (Normally Closed)For use with A, E, and S FAAC control panel logics:A = automatic logic: signal to open; gate closes automatically after timed pauseE = garage door-like logic: signal to open; signal to closeS1 = security logic: similar to A logic, useful in reducing tailgatingDimensions: 4 in. wide x 2.87 in. high x 2.25 in. deep(10.2 cm x 7.3 cm x 5.7 cm)
26. Three-Button SwitchFeatures:.Switch rating: 250 VAC; 10 amps.Indoor or outdoor use.Painted aluminum.Surface mounted.Open buatton is N.O. (Normally Opened).Close button is N.O. (Normally Opened).Stop button is N.C. (Normally Closed)For use with B, C, and P FAAC control panel logics:B = 3 momentary switches: open, close and stopC = 2 continuous pressure switches: open and close; 1 momentary pressure switch: stopP = 3 momentary switches: open, close and stopDimensions: 4 in. wide x 2.87 in. high x 2.25 in. deep(10.2 cm x 7.3 cm x 5.7 cm)
137
SHIPPING WEIGHT PENDING - Please call FAAC for more information
PART NUMBER 2512
PRICE: $96
SHIPPING WEIGHT PENDING - Please call FAAC for more information
PART NUMBER 2510
PRICE: $129
Entry Systems and Security DevicesAccessories
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:12 AM Page 137
Select Gate
27. FAAC Telephone Entry - PhoneLinkFeatures:.Available in 50 & 500 code capacity.Programmable personal master code.Programmable latch code.Programmable "one shot" code.Programmable "sleep" code,
disables both keypad & call button.2 relays.Adjustable volume.Event input.Night light with "60 second on" capability.Optional camera.Unique double ring cadence.Call waiting.Call button disconnect.By-pass switch included
Dimensions: 7.4 in. x 7.4 in. x 5 in. (18.8 x 18.8 x 12.7 cm)
28. Select Engineering Systems Telephone Entry - Select Gate 2
Features:.Uses existing phone lines .Lighted front panel.Local call waiting (bi-directional).Call forwarding capability.Dials 5 outside phone numbers.Four selectable ring styles.Programmed memory not affected by power failure.Optional 2nd and 3rd relaysDimensions: 9.5 in. wide x 7 in. high x 4.33 in. deep (24cm x 18 cm x 11 cm)
SHIPPING WEIGHT 8 lb (3.6 kg)PART NUMBER 3070PRICE Call us at 800-221-8278
PhoneLink
Shipping PartModel Weight Number PricePhoneLink - 50 code 9 lb (4.1 kg) 2875 $1,957
* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or contact our technical department at 1-800-221-8278 or 1-866-925-3222.
New!
138
Entry Systems and Security DevicesAccessories
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:12 AM Page 138
139
29. FAAC AdvantageDK Keyless EntryFor keyless access needs.
Features:.Programmable four digit codes available:
1000.Programmable personal master code.Programmable latch/unlatch code.Programmable "sleep" code."Three strikes, you're out" - resets in 2 minutes.External event input.Two relays w/ variable output time: 1-99 seconds.LED indicators.Optional camera (intercom versions only).Audible tone.Non-volatile memory.Night light.Limited two year warranty
Dimensions:.ADV-05 to ADV-1000: 5.25 in. x 4.75 in. x 4.5 in.
(14.6 x 12.1 x 11.4 cm)
ADV-1000
* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or contact our technical department at 1-800-221-8278.
New!
Shipping PartModel Weight Number Price
Model ADV-1000 5 lb (2.3 kg) 2916 $590
Entry Systems and Security DevicesAccessories
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:12 AM Page 139
35. FAAC RP Interface Board (to use FAAC receiver with non-FAAC product)
SHIPPING WEIGHT 1 lb (.5 kg)PART NUMBER 787725PRICE $62
FAAC Radio Controlled System30. FAAC TM1418 Transmitter
Features:.Choice of over 1000 codes.12V battery included Dimensions: 1.5 in. x 3 in. x .63 in. Note: the FAAC TM1418 transmitterrequires the FAAC RP1418 receiver
(priced separately).
33. FAACXT4 433RC Transmitter Features:.Rolling code technology - the code varies when transmitter is used Analgorithm recognizes and confirms the signal..12V battery included .4 channelsVisor clip included
Dimensions: 2 in. x 2.5 in. x .1/2 in. Note: the FAAC XT433RC receiver (priced separately).SHIPPING WEIGHT 1 lb (.5 kg)PART NUMBER 787453PRICE $22
31. FAAC TM1418 Dual Transmitter Features: Same as Single TransmitterNote: The FAAC TM1418 transmitterrequires the FAAC RP1418 receiver and
the dual interface board (see #37 below)
.SHIPPING WEIGHT 1 lb (.5 kg)PART NUMBER 787317PRICE $51
32. FAAC 1RP418DS Receiver The modular FAAC 1RP418DSreceiver can be connected directly to anyFAAC electronic control panel.Features:.Required power supply: 24DVC.Eliminates the need to hard wireinto the control panel. .Dip switches provided for codeselection Reception range (may vary withenvironmental conditions.)
With built-in antenna wire: up to 100 ft (30 m)
With tuned aerial antenna kit: up to 300 ft (91 m)
Dimensions: 2 in. x 2 in.
SHIPPING WEIGHT 1 lb (.5 kg)PART NUMBER 1RP418DSPRICE $77
SHIPPING WEIGHT 1 lb (.5 kg)PART NUMBER 1TM418DSPRICE $44
34. FAAC RP433RC Receiver The modular FAAC RP433RC receiver can be connected directly to any FAACelectronic control panel.Features:.Required power supply: 24DVC.Eliminates the need to hard wire intothe control panel. .Rollind code technology
SHIPPING WEIGHT 1 lb (.5 kg)PART NUMBER 787741PRICE $41
30.
31.
Call FAAC
for more
details
140
Entry Systems and Security DevicesAccessories
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:12 AM Page 140
38. DSP-7LP Vehicle DetectorThe DSP-7LP will operate on any voltage from 10 to 30 VoltsAC or DC and draws approx. 1 milliampere while waiting for acar. The power LED winks continuously once per second toindicate that the detector is operating in the low power mode.The detector’s small size and lack of any switches or dialsmakes the DSP-7LP the industry’s first solar friendly “Plug-and-Play” vehicle detector. The DSP-7Lp is preset to the nor-mal sensitivity level used in parking/access control applica-tions, and tunes itself to the best operating efficiency.Feature include:• Loop Size – any in-ground inductive loop from 20 to 1200nH• Sensitivity – automatic. it compensates for large loops andlarge lead-ins• Output Ratings – single output, 1 amp relay at 30 VDC resi-tive• Loop Failure – green power indicator flashes twice per sec-
ond if loop circuit is open and 10 times per second if loop cir-cuit is shorted. it operates in the fail-safe mode and will outputa “Detect” for either of these loop failure conditions.• Size – 1.52 in.H x 2.9 in. W x 1.56 in. D• Connector – removable 7-pin terminal block. Pin assign-ments are:
1 – Relay (NC) (opens for detect)2 – Relay Common3 – Relay (NO (closes for detect)4 – Power common5 – Power in6 – Loop7 – Loop
• Operating Temperature – -35° to 165°F (-37°C to 74°C)
SHIPPING WEIGHT 1 lb (.5 kg)PART NUMBER 2659PRICE $227
FAAC Tuned Antenna Kit
36. FAAC Tuned Antenna Kit The standard kit includes:. 16 ft (5 m) of coax cable. 10.5 in. (26.7 cm) whip antenna . Gate mount bracket
37. FAAC Model DSP-15 Vehicle DetectorThe DSP-15 has been specifically designed to handle all parking, drive-through and access control applications on virtually any size loop..Required power supply: 24 VDC.Dimensions of board: 4 in. wide x .87 in.high x
2.75 in. deep (10.2 cm x 2.2 cm x 7 cm)1. Selectable signaling provided by 2 relays:
a) Relay A provides main detection output which can be modified by delay and extension
b) Relay B is switch selectable to one of four options:1) True presence (no extension or delay)2) Pulse on vehicle entering loop3) Pulse on vehicle exiting loop4) Loop fail outputFrequency: automatically tunes within one of four
operating rangesSensitivity: .10 sensitivity settingscan be used in special applications
SHIPPING WEIGHT 2 lb (1 kg)PART NUMBER 412003PRICE: $85
to insure complete detection of high-bed vehiclesConnector: ten position terminal block(no harness required)Indicators: separate power/fail anddetect LED’sLoop size: works on any in-groundinductive loop from 20 to 1000uHHold time: normal or extended hold
time is selectableLoop failure: if the loop fails, opens or shorts, the powerindicator flashes. Output B can also indicate this posi-tion if desired. The option to “remember” an intermittentloop failure is also provided.Delay: can be selected to ignore fast moving vehicles over the loopExtension: extends a call for slow moving vehicles
SHIPPING WEIGHT 2 lb (1 kg)PART NUMBER 2664PRICE $226
Loops and Loop Detectors
141
Entry Systems and Security DevicesAccessories
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:12 AM Page 141
Loops and Loop Detectors40. DSP-10 Vehicle Detector
The DSP-10 has been specifi-cally designed to handle allparking, drive-thru and accesscontrol applications. Can beused as either a safety loop orfree exit loop detector. Withflexibility of “fail-safe” or fail-secure,” it is the only parkingdetector you will ever need.
Model types: DSP-10-LV: low voltage version, 10-30 volts AC or DC
Enclosure: impact resistant, high temperature plastic, 1.75 in. wide x 2.375 in. high x 3.61 in. deep (45 mm x 60 mm x 92 mm)
Loop Size: works on any in-ground inductive loop from 20 to 1000 nH.
Sensitivity: 10 settingsFrequency: automatically tunes within one of four
operating rangesOutputs: Two separate relay outputs that are frontpanel programmable:
Output A – main detection output. Can be modified by delay and extension. Factory set to fail-safe. Output B – can be set to one of the following:
1) true presence (no extension or delay)2) pulse on vehicle entering loop3) pulse on vehicle exiting loop4) loop fail output
Sensitivity Boost: can be used in special applications to insure complete detection of high-bed vehicles.
Loop Failure: if loop fails (opens or shorts) power indicator flashes. Option to “remember” an intermittent loop failure also available.
Delay: can be selected to ignore fast moving vehicles over the loop.
Extension: extends a call for slow moving vehicles.
SHIPPING WEIGHT 1 lb (.5 kg)PART NUMBER 2667PRICE $148
39. DSP-11 Vehicle DetectorThe DSP-11 is a switch-lessvehicle detector with industrystandard 11-pin base. Thesenew detectors have beendesigned to handle parking,drive-thru and access controlapplications.
Model types: DSP-11-LV: lowvoltage version,
10-30 volts AC or DCDimensions: 1.4 in. wide x 1.4 in. high x 2.75 in.deep
(3.56 cm x 3.56 cm x 7 cm)Loop Size: works on any in-ground inductive loop
from 20 to over 1500 nHIndicators: separate power/fail and detect LED’sDetect Memory: power interruptions of short
duration are ignored. If power fails for approx. 1.5 sec. or less the detector “remembers” a vehicle.
Sensitivity: automatic – compensates for large loops and long lead-ins.
Loop Failure: green power indicator flashes slowly if the loop circuit is open and quickly if loop circuit is shorted. The detector will output a “detect” for either of these loop failed conditions.
Fail Safe Operation: All DSP detectors are designed to be Fail Safe in their operation. It will output a “detect” (contact closure) for a “failed” loop condition OR a loss of power to the detector.
Output Relay: 1A at 125 VAC general use, 1A at 30 VDC resistive. Both N.O. (closes for detect) and N.C. (opens for detect) outputs.
SHIPPING WEIGHT 1 lb (.5 kg)PART NUMBER 2665PRICE $135
* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or contact our technical department at 1-800-221-8278.
142
Entry Systems and Security DevicesAccessories
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:12 AM Page 142
Loops and Loop Detectors
Shipping Part PriceLoop Size Weight Number
4 ft x 6 ft (1.2 m x 1.8 m) 5 lb (2.3 kg) 2562 $200
4 ft x 8 ft (1.2 m x 2.4 m) 5 lb (2.3 kg) 2566 $219
Note: A rule of thumb for determining the height of a loop’s inductive field is: the height of the inductive field is 2/3 the length of the loop’s shortest side.
Saw Cut Loop
Saw Cut Loop
Saw-Cut Loops
Shipping Part PriceLoop Size Weight Number
2 ft x 6 ft (0.6 m x 1.8 m) 4 lb (1.8 kg) 2590 $139
4 ft x 6 ft (1.2 m x 1.8 m) 4 lb (1.8 kg) 2591 $178
4 ft x 8 ft (1.2 m x 2.4 m) 4 lb (1.8 kg) 2567 $197
4 ft x 10 ft (1.2 m x 3.0 m) 4 lb (1.8 kg) 2592 $216
6 ft x 12 ft (1.8 m x 3.7 m) 4 lb (1.8 kg) 2569 $253
Note: Other loop sizes, lead-in lengths, 14 Gauge Wire, and PVC Insulation are available on request.
Note: Other loop sizes, lead-in lengths, 14 Gauge Wire, and PVC Insulation are available on request.
* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or contact our technical department at 1-800-221-8278.
41. Saw Cut Loops with 30 ft (9.1 m) Twisted Pair Lead-in18 gauge, XLP insulation
42. Saw Cut Loops with 50 ft (15 m ) Twisted Pair Lead-in 18gauge, XLP insulation
143
Entry Systems and Security DevicesAccessories
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:12 AM Page 143
Linear Feet of Coverage for One Cartridge Linear Meters of Coverage for One Cartridge
Saw Cut Saw Cut Width in Inches Saw Cut Saw Cut Width in cmDepth in Inches .13 .2 .25 .5 Depth in cm 0.3 0.5 0.6 1.3
1 36 ft 24 ft 18 ft 9 ft 2.5 11 m 7.3 m 5.5 m 2.7 m
1.5 24 ft 18 ft 12 ft 6 ft 3.8 7.3 m 5.5 m 3.7 m 1.8 m
2 18 ft 12 ft 9 ft 4.5 ft 5.1 5.5 m 3.7 m 2.7 m 1.4 m
Loops and Loop Detectors
Shipping PartLoop Size Weight Number Price
2 ft x 6 ft (0.6 m x 1.8 m) 4 lb (1.8 kg) 2593 $194
4 ft x 6 ft (1.2 m x 1.8 m) 4 lb (1.8 kg) 2594 $214
4 ft x 8 ft (1.2 m x 2.4 m) 4 lb (1.8 kg) 2595 $225
4 ft x 10 ft (1.2 m x 3.0 m) 4 lb (1.8 kg) 2596 $239
6 ft x 12 ft (1.8 m x 3.7 m) 4 lb (1.8 kg) 2597 $274
Pave-Over Loop
Pave-Over Loops
Note: Other loop sizes and lead-in lengths are available on request.
* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or contact our technical department at 1-800-221-8278.
Note: the thickness of the loop wire in the preceding #43 and #44 is .13 in. (0.32 cm). The wire’s height ranges from .55 in. (1.4 cm) to .34 in. (0.86 cm).
43. Loop Sealant for Saw Cut Loops 30 fl. oz. (0.9 L) caulking cartridge
44. .5 in. (1.24 cm) Flexible Conduit Pave-Over Style Loops with 30 ft (9.1 m) Twisted Pair Lead-in
Shipping PartQuantity Weight Number Price
Grey Sealant 3 lb (1.4 kg) 2166 $93
Black Sealant 3 lb (1.4 kg) 2180 $93
144
Entry Systems and Security DevicesAccessories
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:12 AM Page 144
Shipping Part LengthSize Weight Number Price
50 ft 5 lb (2.3 kg) 2603 Call for Pricing
Loops and Loop Detectors
Shipping Part LoopSize Weight Number Price
2 ft x 6 ft (0.6 m x 1.8 m) 5 lb (2.3 kg) 2561 $214
4 ft x 6 ft (1.2 m x 1.8 m) 5 lb (2.3 kg) 2560 $235
4 ft x 8 ft (1.2 m x 2.4 m) 5 lb (2.3 kg) 2559 $245
4 ft x 10 ft (1.2 m x 3.0 m) 5 lb (2.3 kg) 2558 $260
6 ft x 12 ft (1.8 m x 3.7 m) 5 lb (2.3 kg) 2557 $294
* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or contact our technical department at 1-800-221-8278.
46. .5 in. (1.24 cm) Flexible Conduit for Lead-in Protection
45. .5 in. (1.24 cm) Flexible Conduit Pave-Over Style Loops with 50 ft (15 m) Twisted Pair Lead-in
145
Entry Systems and Security DevicesAccessories
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:12 AM Page 145
Locks
Single Cylinder Electric Lock(strike plate not pictured)
Double Cylinder Electric Lock(strike plate not pictured)Side assembly of electric lock for 1-leaf gate
6 in. (14.9 cm)
5 in. (12.4 cm) .2 in. (.5 cm)4 in. (10 cm)
1.5 in. (3.6 cm)
2 in.(4.8 cm)
.2 in. (.5 cm)
1 Electric lock2 Base plate3 Strike plate4 Side rabbet ledge5 Spring latch6 Through cylinder and barrel (double cylinder electric lock only)
7 Pilot8 Sliding guide9 Cover plateNOTE: Items 4,7,8,& 9 are not included with lock.
47. FAAC Single Cylinder Electric LockFeatures:.Required power supply: 12 VAC pulsed(available on FAAC control panels.).Manual keyed operation from one side of the gate.3 keys provided.Strike plate included
48. FAAC Double Cylinder Electric LockFeatures:.Required power supply: 12 VAC pulsed(available on FAAC control panels.).Manual keyed operation from both sides of the gate.6 keys provided.Strike plate included)
SHIPPING WEIGHT 6 lb (2.7 kg)PART NUMBER 712650/712652*PRICE $248
SHIPPING WEIGHT 6 lb (2.7 kg)PART NUMBER 712650/712651*PRICE $222
* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or contact ourtechnical department at 1-800-221-8278 or 1-866-925-3222.
146
Entry Systems and Security DevicesAccessories
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:12 AM Page 146
Locks
Model M62-GFElectromagnetic Lock
(strike plate not pictured)
49. Securitron Model M62-GF Electromagnetic Lock
Features:.Required power supply: 24 VDC (available on FAAC control panels.).Holding force: 1200 lb (540 kg).Conduit connector: Universal .5 in. ID (female) .75 in. OD (male).Four mounting holes on the face of the lock.Strike plate.Attachment hardwareDimensions:8 in. wide x 1.75 in. deep x 2.9 in. high(20.3 cm x 4.4 cm x 7.4 cm)The Securitron Model M62-GF Electromagnetic Lockrequires the following additional equipment (priced sepa-rately) when used with a FAAC control panel:12 VAC External Relay (See #55 below)
50. 12 VAC External RelayUse with MAG lock
SHIPPING WEIGHT 1 lb (.5 kg)PART NUMBER 2630PRICE $59
Z BRACKETPART NUMBER 2690PRICE $214
SHIPPING WEIGHT 14 lb (6.4 kg)PART NUMBER 2353PRICE $835
12 VAC External Relay
.1 in. (.26 cm)
.52 in. (1.3 cm)
.12 in. x .05 in.(.3 x .12 cm) hole
.84 in. (2.2 cm)
.14 in. (.35 cm) 1.4 in.
(3.6 cm) or less
.08 in. (.2 cm)
.02 in. (.05 cm).16 in. (.42 cm)
.25 in. (.64 cm).25 in.
(.65 cm).21 in.
(.55 cm)1.07
in.
(2.8
cm
)
1.7
in.
(4.4
cm
)
1.5
in.
(3.8
cm
)
* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or contact ourtechnical department at 1-800-221-8278 or 1-866-925-3222.
147
Entry Systems and Security DevicesAccessories
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:12 AM Page 147
51. Securitron Model M32F-24 Electromagnetic Lock
Features:.Required power supply: 24 VDC (available on FAAC control panels.).Holding force: 600 lb (270 kg).Two mounting holes on the face of the lock.Strike plate.Attachment hardwareDimensions:8 in. wide x 1.5 in. deep x 1.88 in. high(20.3 cm x 3.8 cm x 4.8 cm)The Securitron Model M32F Electromagnetic Lockrequires the following additional equipment (priced sepa-rately) when used with a FAAC control panel:12 VAC External Relay (See #55 on P. 140)
52. FAACLampConnects to FAAC 115 VAC or 230 VAC control panels;please specify voltage when ordering. .Amber light flashes while gate opens and closesDimensions: 4 in. x 4.5 in. (5.5 in. including base) x 5 in.(10 cm x 11.5 cm [14.2 cm] x 13 cm)
Z BRACKETPART NUMBER 3150PRICE $205
SHIPPING WEIGHT 12 lb (5.4 kg)PART NUMBER 2354PRICE $601
SHIPPING WEIGHT 1.1 lb (.5 kg)PART NUMBER 410013 (230 VAC)PART NUMBER 410013* (115 VAC)PRICE $74
REPLACEMENT BULB 2128 (230 VAC)2132 (115 VAC)
PRICE $18
Warning Lights
FAACLamp
Model 32FElectromagnetic Lock
(strike plate not pictured)
148
* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or contact ourtechnical department at 1-800-221-8278 or 1-866-925-3222.
Entry Systems and Security DevicesAccessories
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:12 AM Page 148
Transformer
Timers
Grasslin Digi 20-A-24 Time Switch
53. Grasslin Digi 20-A-24 24hr 7 day Time Switch
Features:.Required power supply: 24 VAC or 24 VDC (availableon FAAC control panels).Output relay rating: 277 VAC, 16A.Output relay: Single Pole Double Throw.Signals up to 20 times per timing period.Maximum timing period: 1 week.Minimum time between signals: 1 minute.Daylight time change over: Manual.Manual override
54. Transformer/Step-up.120 VAC > 240 VAC.240 VAC > 120 VAC.500 VA.Enclosure 3R outdoor.UL/CSA ListedDimensions will not exceed: 4.5 in. wide x 9.5 in. high x 4 in. deepNote: Position of mounting tabs on case may vary
SHIPPING WEIGHT 17 lb (7.7 kg)PART NUMBER 2199PRICE $515
SHIPPING WEIGHT 2 lb (1 kg)PART NUMBER 2144PRICE $342
149
* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or contact ourtechnical department at 1-800-221-8278 or 1-866-925-3222.
Electrical and HardwareAccessories
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:12 AM Page 149
Ditek surge protectors detect potentially harmful surges in electrical current and re-direct these surges to ground.
Ditek Surge Protector for 110/125/220 VAC circuits
(115 version shown; 220 version has similarconfiguration, but larger dimensions)
Ditek Surge Protector for Low-VoltageCircuits
Ditek Surge Protection
55. Hard Wired Protection for 110/125 VAC circuits. Self-restoring after each surge within ratings. .5 in. conduit connector providedDimensions: 3 in. wide x 1.9 in. high x 1.5 in. deep(7.6 cm x 4.8 cm x 3.8 cm)
SHIPPING WEIGHT 2 lb (1 kg)PART NUMBER 2355PRICE $153
56. Hard Wired Protection for 220 VAC SinglePhase Circuits. Self-restoring after each surge within ratings. .5 in. conduit connector providedDimensions: 4 in. wide x 2 in. high x 2 in. deep (10.2 cm x 5.1 cm x 5.1 cm)
SHIPPING WEIGHT 2 lb (1 kg)PART NUMBER 2356PRICE $157
57. Screw Terminal Connection Protectionfor Low Voltage Power Loop, Voice, andData Circuits . Provides protection for power, data, LED andaudible circuits. One model protects 5V, 12V and 24V circuits. Self-restoring after each surge within ratingsDimensions: 3 in. wide x 1.6 in. high x 1.6 in. deep(7.6 cm x 4 cm x 4 cm)
SHIPPING WEIGHT 2 lb (1 kg)PART NUMBER 2357PRICE $198
150
* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or contact ourtechnical department at 1-800-221-8278 or 1-866-925-3222.
Electrical and HardwareAccessories
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:12 AM Page 150
Enclosures
Model FRP enclosure
Plastic enclosure with lockable hinged cover
10 in.(25.4 cm)
12 in.(30.5 cm)
5.5 in.(14 cm)
8.38 in.(21.3 cm)4.65 in.(11.8 cm)
10.6 in.(27 cm)
58. Model FRP (Fiber Reinforced Plastic)Enclosure The Model FRP is ideal for applications that
require an enclosure that is extremely tough.. Strong, highest quality construction. Rubberized gasket door seal. Includes metal mounting plate with grounding lug. UL and CSA Listed. Two .9 in. (2.2 cm) pre-drilled holes in box bottom
SHIPPING WEIGHT 6 lb (2.7 kg)PART NUMBER 2359PRICE $245
59. Model L (Latching) Plastic Enclosure. Keyed latch on hinged door. Rubberized gasket door seal. Door can open to right or left. Will accept DIN rail. Molded standoffs for control panel mounting. Three 1.13 in. (30 mm) pre-drilled holes (withplugs) in box bottom. Two .75 in. (2 cm) knockouts in box bottom
SHIPPING WEIGHT 5 lb (2.3 kg)PART NUMBER 720118PRICE $73
151
* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or contact ourtechnical department at 1-800-221-8278 or 1-866-925-3222.
Electrical and HardwareAccessoriesElectrical and Hardware
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:12 AM Page 151
SHIPPING WEIGHT 35 lb (16 kg)PART NUMBER 2605PRICE $815
Enclosures
Large Fiberglass Enclosure, opened and locked
Pre-wired for free exit and safety pin plug in detector.(Detector no included)
60. 14 in. x 16 in. x 6 in. Fiber Reinforced Enclosure. Hinged lockable. Strong, highest quality construction. Rubberized gasket door seal. Weather resistant. UL and CSA Listed.Two .9 in. (2.2 cm) pre-drilled holes in box bottom
61. Metal Enclosure 16 in. x 20 in.. Hinged lockable. Strong, highest quality construction. Rubberized gasket door seal. Weather resistant. UL and CSA Listed.Two .9 in. (2.2 cm) pre-drilled holes in box bottom
SHIPPING WEIGHT 16 lb (7.3 kg)PART NUMBER 3300PRICE $541
W/backplate wired 115V
SHIPPING WEIGHT 16 lb (7.3 kg)PART NUMBER 3303PRICE $541
W/backplate wired 230V
SHIPPING WEIGHT 16 lb (7.3 kg)PART NUMBER 3306PRICE $541
W/backplate wired 24 VDC
152
* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or contact ourtechnical department at 1-800-221-8278 or 1-866-925-3222.
Electrical and HardwareAccessories
W/backplate wired 115V
SHIPPING WEIGHT 35 lb (16 kg)PART NUMBER 2479PRICE $815
W/backplate wired 230V
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:12 AM Page 152
153
Electrical and Hardware
Exploded Views
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:12 AM Page 153
Exploded Views & Pricing
Model 412 . . . . . . . . . . . . . . . . . . . . . . . 155Model 415 . . . . . . . . . . . . . . . . . . . . . . . 156Model 400. . . . . . . . . . . . . . . . . . . . 157-160Model 402 CBC . . . . . . . . . . . . . . . 161-162Model 422. . . . . . . . . . . . . . . . . . . . 163-164Model 750 . . . . . . . . . . . . . . . . . . . . . . . 165Model 750 CBAC Pump . . . . . . . . . . . . 166Model 750 Enclosure. . . . . . . . . . . . . . . 167Model 760. . . . . . . . . . . . . . . . . . . . 168-169Model 760 CBAC. . . . . . . . . . . . . . . . . . 170Model 760 Load Bearing Box . . . . . . . . 171
154
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:12 AM Page 154
POS PART NO DESCRIPTION QTY LIST PRICE11233
79936079935971300971713457171335
Motor Housing, SX Top SectionMotor Housing, DX Top SectionManual Release Key, 412Flange, Protective Cover, 412 SXFlange, Protective Cover, 412 DX
11111
171.00171.009.0017.0017.00
4
5
6
N/A
N/A
799358
Nickel Plated Self Tapping Screw(3.5 x 13mm)
Self-Tapping Screw(5.5 x 15mm)
Cylinder Collar
1
2
1
N/A
N/A
21.007889
736060727148727147N/A
Cylinder Assembly NewEnd Cap, Protective Cover SXEnd Cap, Protective Cover DXNickel Plated Self-Tapping Screw
(3.5 x 9.5mm)
1113
190.007.007.00N/A
POS PART NO DESCRIPTION QTY LIST PRICE1010111213
270527077272795722298N/A
Capacitor for 115V (25uf)Capacitor for 220V (8uf)Protective Cover, 412 NewProtective Cover Support, 412Self Tapping Screw (5 x 18mm)
11114
12.009.0080.0019.00N/A
1415151617
716056746030746755746028N/A
Motor Housing, Bottom SectionStator (Motor) for 220VStator (Motor) for 115VRotor (Motor)Strain Relief, 412
11111
46.00111.00128.0080.00N/A
18 390009 Skin Pack, 412(1 pack = 2 operators)
1 130.00
Exploded View, Model 412
155
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:12 AM Page 155
BLOW-UP VIEW, MODEL 415
POS PART NO DESCRIPTION QTY LIST PRICE12345
722001572840057183667182075N/A
Rear Mounting BracketRear Mounting PlateLong Pin With C ClipsShort PinHex Nut
11111
35.0019.0017.0014.00N/A
67899
722801571614842840360202145N/A
Rear ForkRear Upper BodyManual Release AssemblySnap RingNickel Plated Self Tapping Screw
11111
38.0069.0068.0045.00N/A
1011121314
60202155716150490108718354N/A
Manual Release LeverLimit Switch Protective CoverLimit Switch AssemblyFront Mounting Pin w/ C ClipsSelf Tapping Screws (4.2mm x 13mm)
11117
17.0075.00106.007.00N/A
15 728271 Front Mounting Bracket 1 43.00
POS PART NO DESCRIPTION QTY LIST PRICE1617181920
711027490104718367499399N/A
Limit Switch Adjusters CoverCylinderScrew Drive Pin and C ClipsLower Front CoverSelf Tapping Screw (6.3mm x 19mm)
11118
17.00125.003.0023.00N/A
2122
2324
60202225N/A
6020216560202215
Gear (Piston)Self Tapping Screw(4.8mm x 13mm)
BushingGear (Motor)
110
21
73.00N/A
17.0093.00
2526272829
770890709324602021757161492705
Motor 115 VACGasketElectric Cable CoverRear Body Lower Half25uf Capacitor
11111
219.0017.0031.0071.0012.00
30 490106 Skin Pack 415 L LS 1 69.00
156
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:12 AM Page 156
POS PART NO DESCRIPTION QTY LIST PRICE12345
20367220015728400571820757228015
Galvanized Nut (8mm)Rear BracketRear Bracket PlateShort PinRear Fork
11111
4.0035.0019.0014.0037.00
6891011
203770991015490325N/A7119475
Self-Locking Nut (8 mm)Gasket (D80)Locking Cap KitSelf Threading Screw (4mm)Vibration Dampener
12112
4.005.00
66.00 N/A4.00
12131415*16
236523662367770004257119485
Motor Bolt (4x50 mm)Lock Washer (4 mm)Hex Nut (4 mm)115V 1400 RPM MotorVibration Dampener
44412
4.004.00 4.00
188.004.00
1717a18192021
71618257161835N/A7182175N/A7110015
Operator Body 400Operator Body (Long/EG)Vent Scre Label Long PinT20 Torx (5 x 20mm)Oil Plug
111141
102.00118.00 N/A15.00N/A3.00
22 23293031
227470940653204425N/A 7090010015
Vent Screw (4x6 mm)Gasket (copper)1 Lt. Lobe PumpPump Pin (4x28mm)O-Ring
13113
4.003.00
178.00N/A3.00
MODEL 400 BLOW UP AND PARTS LIST
3233343535a
30602069 707309572203557220365
Washer (Swivel)Swivel Jam Nut (10mm)Swivel Joint squareFront Mounting BracketFront Mounting Bracket (Long E/G)
11111
3.00 5.0078.0029.0032.00
36373838a394040a
N/A 711940570191957019225417001572721057272115
Star Washer (5mm)Protective Cover End Cap PlugTie-Rod (Protective Cover)Tie-Rod (Protective Cover Long/EG)Protective Cover End CapProtective CoverProtective Cover (Long/EG)
2222111
N/A 3.006.007.0016.0059.0071.00
4141a424344**45
390098539009752167+6115 QT+27077228015+
Skin Pack: 400Skin Pack: 400 EGSeal KitOil: 1 qt.Capacitor 8uF: 220VAluminum Fork Kit
111111
152.00152.0083.0028.009.0066.00
POS PART NO DESCRIPTION QTY LIST PRICE
* 220 VAC 8 uF Motor Part Number is 7700205 188.00* 220 VAC 16 uF Motor Part Number is 77000415 188.00
** 16uF Capacitor for use with 220 VAC Motor. Part #: 2706 9.00** 25uF Capacitor for use with 115 VAC Motor. Part #: 2705 18.00
157
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:12 AM Page 157
POS PART NO DESCRIPTION QTY LIST PRICE
12345
7049135N/A 440406570490054404085
Valve RetainerO-RingInlet ValveRetainer (Brass)Lock Valve (Bi-Metal)
15222
4.00N/A6.005.009.00
677a8910
49943457230295 7230305N/AN/A4180285
Valve Body (CBAC)Tie-Rod (Cylinder)Tie-Rod (Cylinder) (Long/EG)Star Washer (5 mm)O-Ring (Shuttle Piston)Shuttle Piston
144411
244.007.009.00N/AN/A18.00
1111a121313a1415
736602573660157091015435010543501154994625N/A
CylinderCylinder (Long/EG)Piston Rod SealsPiston Rod AssemblyPiston Rod Assembly (Long/EG)Front FlangeFront Flange Bolt (5 x 20 mm)
1121114
67.0074.007.0098.00112.0088.00N/A
161718192021
N/A70903600257090815704900573613354180415
O-Ring Front Flange (Internal)O-Ring (Valve Body)O-Ring (Retract Tube 06’)Guide Ring (Piston)Retract TubeBy-Pass Cap Assembly (06)
112112
N/A4.004.005.0027.0015.00
24252628
7090280015N/A41801954404095
O-Ring (Manual Release)Spacer (Manual Release)Manual ReleaseInlet Valve (Bi-Directional)
1111
3.005.00
18.0017.00
MODEL 400 BLOW UP AND PARTS LIST
158
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:12 AM Page 158
POS PART NO DESCRIPTION QTY LIST PRICE
12345
21517290445N/AN/AN/A
Knob Screw (ss) 4mm x 8mmManual Release Knob w/ screwScrew (ss) 4mm x 10mmLocking Cap BaseLock
11311
4.0010.00N/AN/AN/A
678910
7090290015N/A713100572752757090855
O-Ring (Lock Cylinder)Top CoverKey (Viro)Cover, KeyO-Ring Extension Receptacle
11111
3.00N/A5.004.003.00
1112131415
N/A7090865N/AN/A7090845
Extension ReceptacleO-Ring (Base to Body)By-Pass ExtensionsManual Release ExtensionsO-Ring, Extensions
11213
N/A3.00N/AN/A4.00
161718
4903274903264185045
Extensions with O-RingsManual Release KitLocking Cap Complete
311
29.0035.0045.00
MODEL 400 LOCKING CAP PARTS LIST
159
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:12 AM Page 159
POS PART NO DESCRIPTION QTY LIST PRICE12345
717148541701063001005N/A7110015
Flange (Rear 08’)Manual ReleaseWiring Harness (08’) Electric CableO-Ring (18x1 mm)Plug (oil fill)
11111
67.0021.0069.00N/A3.00
6789
7109135N/AN/A7090725
Cable support anti-kink (plastic)Screw (3x12 mm)Screw (3x8 mm)O-Ring (Internal Harness)
1111
6.00N/AN/A2.00
MODEL 400 REAR FLANGE PARTS LIST
160
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:12 AM Page 160
BLOW-UP VIEW, MODEL 402 CBC
161
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:12 AM Page 161
POS PART NO DESCRIPTION QTY List Price
12345
20367220015728400571820757228015
Galvanized Nut (8mm)Rear BracketRear Bracket PlateShort PinRear Fork (Alum)
11111
4.0035.0019.0014.0038.00
67*9*10*
2037710923570393052581
Self-Locking Nut (8mm)Strain ReliefStrain Relief Brass WasherFiber Washer
1111
4.0020.004.004.00
1112131415
75140557170435709910157450005N/A
Electric Power CordRear FlangeGasket (D80)Operator BodySelf-Threading Screw
11211
43.0067.005.0083.00N/A
1617181920**
711947523652366236777000425
Vibration DampenerMotor Bolt (4mmx50)Lock WasherHex Nut (4mm)115V 1400RPM Motor
24441
4.004.004.004.00188.00
2122232425
7119485N/A7182175N/AN/A
Vibration DampenerVent Screw LabelLong PinSocket Head Screw (5x20mm)Plug (Oil)
21181
4.00N/A15.00N/AN/A
2627282930
227470940653204425N/AN/A
Vent Screw (4x6mm)Gasket (Copper)1 Lt Lobe PumpPump PinBy-Pass Protection Cover
11121
5.002.00
178.00N/AN/A
3132333435
N/A7271545711402572720854304015
Spacers (Protective Cover)Protective Cover End CapProtective Cover PlugProtective CoverFront Mounting Bracket
21111
N/A5.002.0069.0019.00
36373839
7182355N/A7090010015N/A
Pin Front BracketBlack Plastic ScrewO-Ring (3)Stainless Steel Screw (2.9mm x 6.5mm)
1132
5.00N/A3.00N/A
POS PART NO DESCRIPTION QTY List Price
101102103104105
4404065N/A704900541802054180395
Inlet ValveO-RingValve Retainer Black Lock ValveBrass By-Pass Valve
25211
6.00N/A5.005.009.00
110 7090350025 O-Ring (Front Flange) 2 4.00
111112113114115
709066573613157230225N/AN/A
O-Ring (Alum Retract Tube)Retract Tube (Alum)Tie-Rod (Cylinder)O-Ring (Front Flange Internal)Star Washer
21414
4.0032.006.00N/AN/A
116117118119120
49941654350065709503573660657271555
Front FlangePiston AssemblyPiston Rod PackingCylinderProtective Cover Guide
11111
68.00103.0019.0075.004.00
121122123124125
N/A418028544040854180355713002
O-Ring (Shuttle PistonShuttle PistonLock ValveManual ReleaseTriangular Release Key
11111
N/A18.009.0018.00500
126128129130130
N/A4994365704900539052353906145
Galvanized ScrewValve Body (CBC)Brass RetainerSkin Pack (Double)Skin Pack (Single)
11111
N/A244.005.00
148.0087.00
131132
2168*6115 Qt +
Seal KitMonolec Oil (1 Qt)
11
114.0028.00
MODEL 402 CBC PARTS LIST
* 7109235 Included in kit** 77000415 220V Motor - 16 uf capacitor** 7700205 220V Motor - 8 uf capacitor
162
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:12 AM Page 162
163
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:12 AM Page 163
POS PART NO DESCRIPTION QTY LIST PRICE113115116117
7090360025709035002570906657361315
O-Ring (Valve Body)O-Ring (Mid-Flange)O-Ring Retract Tube (Long)Retract Tube (Long)
1221
4.004.004.0032.00
118119120121122
7230225N/AN/A49941654350085
Tie-Rod ( Cylinder)O-Ring Front Flange (Internal)Star WasherFront FlangePiston Assembly
41411
6.00N/AN/A68
96.00
123124125126127
7095035736606572715554994494404085
Piston Rod PackingCylinderProtective Cover GuideMid FlangeLock Valve
11112
19.0075.004.0069.009.00
128130131132
4180285N/AN/A4994345
Shuttle Piston ‘97Galvanized WasherGalvanized ScrewValve Body (CBAC)
1441
17.00N/AN/A
244.00
133134135
704900539053252172*
Valve RetainerSkin Pack - SingleSeal Kit
211
5.00129.00118.00
POS PART NO DESCRIPTION QTY LIST PRICE12345
21517290445N/AN/AN/A
Knob Screw (SS) 4mm x 8mmManual Release KnobScrew (SS) 4mm x 10mmLocking Cap BaseLock
11311
3.0010.00N/AN/AN/A
678910
7090290015N/A713100572752757090855
O-Ring (Lock Cylinder)TopKey (Viro)Cover, KeyO-Ring (Base to Body)
11111
3.00N/A5.004.003.00
1112131415
N/A7090865N/AN/A7090845
Extension ReceptacleO-Ring Extension ReceptacleBy-Pass ExtensionsManual Release ExtensionO-Ring, Extensions
11213
N/A3.00N/AN/A3.00
16171819
4903274903264185045490325
Extensions with O-RingsManual Release KitLocking Cap CompleteLocking Cap with Manual Release System
3111
29.0035.0045.0066.00
24 7161815 Operator Body (New) 1 67.00
* 7109235 Included In Kit 19.00** 77000415 220V Motor - 16 uf capacitor 181.00** 7700205 220V Motor - 8 uf capacitor 181.00
POS PART NO DESCRIPTION QTY LIST PRICE12345
20367220015728400571820757228015
Galvanized Nut (8mm)Rear BracketRear Bracket PlateShort PinRear Fork
11111
4.0035.0019.0014.0038.00
678910
203771706857099101570904400157090655
Self-Locking Nut (8 mm)Rear FlangeGasket (D80)O-Ring Locking Cap (Small)O-Ring Locking Cap (Center)
11221
4.0069.005.003.004.00
1112131415
418502157094065227472708057270815
Locking CapGasket (Copper)Vent Screw (4x6 mm)Locking Cap CoverAccess Slide (Locking Cap)
11211
67.003.005.00
20.008.00
1617181920
7131005N/A711947523652366
Viro Key (Manual Release)Self Threading Screw (4mm)Vibration DampenerMotor Bolt (4x50 mm)Lock Washer
11244
5.00N/A4.005.004.00
2122**232425
2367770004257119485309005N/A
Hex Nut (4 mm)115V 1400 RPM MotorVibration DampenerOperator BodyVent Screw Label
41211
4.00188.004.0082.00N/A
2627282930*
71821752274N/A75140552581
Long PinVent Screw (4x6 mm)Socket Head Screw (5x20 mm)Electric Power CordFiber Washer
11811
15.005.00N/A43.004.00
31*32*33*3435
7039305710923571092353204425N/A
Strain Relief Brass WasherStrain Relief Nut Strain Relief1 Lt. Lobe PumpPump Pin
11112
4.0020.0020.00178.00N/A
3637383940
N/A4900605727154571140257272125
Spacers (Protective Cover)Swivel JointProtective Cover End CapProtective Cover PlugProtective Cover
21111
N/A48.005.003.0071.00
41424344101
72205154900605N/A70900100157090010015
Front Mounting BracketSwivel Joint KitSelf Threading ScrewO-RingO-Ring
11136
19.0048.00N/A3.003.00
102103104105106
70490054404065418003541800454180035
Valve RetainerInlet ValveRed By-Pass Cap AssemblyGreen By-Pass Cap AssemblyBy-Pass Cap (Red)
22111
5.006.005.005.005.00
109110112
418004570902800154180195
By-Pass Cap (Green)O-Ring Retract Tube (Short)Manual Release
131
5.003.0018.00
MODEL 422 PARTS LIST
164
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:12 AM Page 164
BLOW-UP VIEW, MODEL 750
POS PART NO DESCRIPTION QTY LIST PRICE12345
N/AN/A709104573501557193055
Bolt (10mm x 25mm)Lock WasherPiston RingPiston750 Rack (100 Degree)
22221
N/AN/A12.0043.00109.00
678910
N/A7099195N/A23392481
O-Ring (26.7mm x 1.78mm)Gasket CylinderFBushingBearing ThrustBearing (6006)
22212
N/A5.00N/A96.00121.00
1112131415
71915252550709303573090957039125
PinionSnap RingSeal (Top)Splined CollarDust Cover
11111
190.007.0016.0032.0010.00
161718
19
72804457270415N/A
N/A
Cover PlateBox Lid (750 Half Box)Self-Tapping Screw Stainless Steel(3.9mm x 9.5mm)Lock Washer (Stainless Steel)
116
6
4.0069.00N/A
N/A
POS PART NO DESCRIPTION QTY LIST PRICE20212223**24
7223205N/AN/A7366245N/A
Half BoxBolt (8mm 100mm)Lock WasherCylinder (100 Degree)O-Ring (66.4mm x 1.78mm)
241222
41.00N/AN/A74.00N/A
2526272829
7170275724602571100457011075710101002
Flange (Right Side)Zert Fitting (Air Drain) Dust Cover (Zert Fitting)Bolt (8mm x 105mm)Elbow
12282
44.006.003.007.00
27.003031323334
7102025N/A72001657287515701217
Ferrule FittingO-Ring (50.52mm x 1.78mm)Bearing Cup (Bottom)Leveling PlateLeveling Bolt (12mm x 35mm)
21114
3.00N/A35.0083.0013.00*
3536373839
71702857161745390509152171*6115 Qt +
Flange (Left Side)BodySkin PackSeal Kit (750 Drive Unit)Monolec Oil (1 Qt)
11111
44.00203.0037.0087.0028.00
* 7193065 750 Rack 180* 110.00** 7366235 750 Cylinder 180* 84.00
165
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:12 AM Page 165
BLOW UP, MODEL 750 CBAC
POS PART NO DESCRIPTION QTY LIST PRICE12*345
320443577000425751412570993157450115
Lobe Pump (.75 Lt)115V 1400 RPM MotorElectric Power CordFlange GasketBody (Pump Housing)
11121
178.00188.0055.006.0069.00
678910
N/A709406522747270531N/A
Vent Screw DiagramWasher (7mm x 4mm x 1mm)Vent Screw (4mm x 6mm)Flange (Upper)Lock Washer
11112
N/A3.005.00N/AN/A
1112**13**14**15
N/A2581703930571092357112055
Screw (6mm x 10mm)Fiber WasherWasher (Brass)Nut (Strain Relief)Filler Cap (Dip Stick)
21111
N/A4.004.0020.005.00
1617181920
N/AN/A227423652366
Tie RodStar WasherVent Screw (Ground Screw)Motor Bolt (4mm x 50mm)Lock Washer
44144
N/AN/A5.004.004.00
2122232425262728
2367N/A709001001570900300157290155N/AN/A4180225
Jam NutPin (Pump 4mm x 28mm)O-Ring (Pump 4.48mm x 1.78mm)O-Ring (6.75mm x 1.78mm)Manual Release LeverWasher (4mm x 12mm)Allen Bolt (4mm x 12mm)Manual Release
42211111
4.00N/A3.003.006.00N/AN/A20.00
POS PART NO DESCRIPTION QTY LIST PRICE2930313233
N/A7049005440406544040857102055
O-Ring (10.82mm x 1.78mm)Lock Valve RetainerInlet ValveLock ValveFerrule Fitting
62222
N/A5.006.008.004.00
3435363738
N/A4180395418039541803954180395
Nut (12mm x 1mm)By Pass Cap (Brass)By Pass Cap PlugBy Pass SpringBy Pass Cap (Brass)
21221
N/A9.009.009.009.00
39
404142
N/A
N/A41802857090440015
Self Tapping Screw (2.9mm x 6.5mm)
Screw (5mm x 8mm)Shuttle PistonO-Ring (7.6mm x 1.78mm)
2
211
N/A
N/A18.002.00
434445
49944570901500157049005
Valve BodyO-Ring (9.25mm x 1.78mm)Lock Valve Retainer(Brass)
122
205.003.005.00
48495051
71101153907002170*6115 Qt+
Gas FittingsBanjo Bolt KitDSeal KitMonolec Oil (1 Qt)
2111
10.0035.0083.0028.00
* All included in kit #7109235 20.00** 220V 1400 RPM Motor Part #7700205 188.00* 77000415 220V motor - 16ufcapacitor 188.00
166
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:12 AM Page 166
BLOW-UP VIEW, MODEL 750 ENCLOSURE
POS PART NO DESCRIPTION QTY LIST PRICE
1
234
N/A
N/AN/AN/A
Self Tapping Screw (3.9mm x 9.5mm)
WasherSnap RingO-Ring (15.6mm x 1.78mm)
1
111
N/AN/AN/AN/AN/A
567
8
7128035713002N/A
7309105
Lock Body (Enclosure)Triangular Release KeyGalvanized Self Topping Screw(2.9mm 9.5mm)
Plastic Hinge
11
11
4.005.00N/A4.005.00
910
1112
720309N/A
N/AN/A
750 EnclosureSelf Tapping Screw(4.8mm x 16.7mm)
WasherNut (Plastic)
1
112
99.00N/AN/AN/AN/A
1314
N/A709974
Plug (Plastic)Gasket (Lid)
21
N/A5.00
MODEL 750 ENCLOSURE PARTS LIST
167
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:12 AM Page 167
BLOW-UP VIEW, MODEL 760
168
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:12 AM Page 168
POS PART NO. DESCRIPTION QTY LIST PRICE
12345
70193457011345N/A72012954246385
Mounting Bolt (Bottom)Mounting Bolt (Top)Stainless Steel Screw (Doghouse)Manual Release HousingManual Release Rod
22411
19.007.00N/A
15.00**36.00
678910
N/AN/AN/A41802957099595
Snap RingManual Release Rod EndRetaining PinManual releaseGasket (Manifold)
11111
N/AN/AN/A22.0022.00
1112131415
N/A49976270392857110115N/A
Parallel PinManifoldCopper WasherBanjo BoltLock Washer
21225
N/A163.004.0010.00N/A
1617181920
N/A7090150015418026570900100157011355
Allen Head BoltO-Ring (With Part No. 18)Brass By-Pass Cap (Break)O-RingFlange Bolt Stainless Steel
32238
N/A3.0022.003.0010.00
2122232425
N/AN/AN/A4997607361365
Lock WasherJack Counter Nut Brass Jam NutSnap RingFlange (Manifold Side)Retract Tube
82211
N/AN/AN/A
443.0024.00
2627282930
N/AN/A4404085N/A7090490025
Allen Head ScrewO-Ring (With Part No. 28)Lock ValveSnap RingO-Ring (Flange)
24222
N/AN/A9.00N/A4.00
MODEL 760 PARTS LIST
POS PART NO. DESCRIPTION QTY LIST PRICE
3132333435
736613570995857350275N/A7246025
CylinderGasket (Cylinder)Ramping PistonO-Ring (Ramping Piston)Air Drain Valve
22222
107.006.0042.00N/A6.00
3637383940
7110045N/AN/AN/A7094115
Debris CoverO-Ring (Manual Release)Allen Head Bolt (Piston)Lock WasherRPiston (Red Internal)
21222
3.00N/AN/AN/A15.00
4142434445
7092025735027570491957119485N/A
Piston SealPistonPiston Seal (Inner)Vibration DampenerLock Washer (Coated)
22224
17.0042.0025.004.00N/A
4647484950
709038002571932057160505499761N/A
O-Ring (Rack)RackRam BodyFlange (Non-Manifold)Allen Head Screw
21112
4.00131.00121.00423.00N/A
5152535455
72242157099575N/AN/A7090665
Bracket (Pump to Drive)Gasket (Drive to Box)Self Tapping ScrewRack Protecting CoverO-Ring (Retracting Tube)
11212
7.009.00N/AN/A4.00
565758
39055152176*6115 Qt+*
Skin Pack (Mounting Hardware)Seal KitMonolec Oil (1 Qt.)
111
93.00188.0028.00
169
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:13 AM Page 169
BLOW-UP, MODEL 760 CBAC
POS PART NO DESCRIPTION QTY LIST PRICE
12**345
320443577000425751412570993157450115
Lobe Pump75 lt.115v 1400 RPM MotorElectric Power CordFlange GasketBody (Pump Housing)
11121
178.00188.0055.006.0069.00
6*7*8*9*10
7276025258170393057109235N/A
Flange (Upper)Fiber WasherStrain Relief Brass WasherStrain Relief NutFiller Cap
11111
27.004.004.0020.00N/A
11*12131415
7230385N/A227423652366
Tie Rod Pump (760)Star Washer Stainless SteelVent Screw (4mm x 8mm)Motor Bolt (4mm x 50mm)Lock Washer (4mm)
44144
10.00N/A5.004.004.00
161718
2367N/A7090010015
Hex Nut (4mm)Pump Pin (4mm x 28mm)O-Ring
422
4.00N/A3.00
POS PART NO DESCRIPTION QTY LIST PRICE
1920212223
N/A4404065N/A44040854180395
O-RingInlet ValveValve RetainerLock ValveGreen By-Pass Cap
62221
N/A6.00N/A9.009.00
2425262728
418039541803954180395N/A4994075
Red By-Pass CapBy-Pass CapBy-Pass SpringO-Ring (By-Pass Cap)Valve Body
12221
9.009.009.00N/A
178.002930313233
N/A418028570490052170*6115 Qt+*
O-Ring (Shuttle Piston)Shuttle PistonValve Retainer (Brass)Seal KitMonolec Oil (Qt.)
11211
N/A18.005.0083.0028.00
* 7109235 Included in Kit 20.00* 77000415 220V Motor 16 uf Capacitor 188.00* 7700205 220V Motor 8 uf Capacitor 188.00
170
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:13 AM Page 170
BLOW UP, MODEL 760 LOAD BEARING BOX
POS PART NO DESCRIPTION QTY LIST PRICE
12345
72760057309095709322570950753907535
Load Bearing Box CoverSplined CollarDust CoverSeal (Top)Bushing Group upper 760
11111
131.0031.0024.0019.00122.00
67*8910
70907657192475390752549009857280885
O-Ring Upper BushingRAM Pinion New Style ‘05Bushing Group Lower 760Load Bearing BoxMounting Bar 760
11112
7.00155.0088.00523.0043.00
11121314
N/AN/A7099575N/A
Protective Cover for Gear8x35 5931 8GZGasketScrew Box Cover
1211
N/AN/A9.00N/A
* 7192475 RAM Pinion ‘05 New Style... 155.00
171
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:13 AM Page 171
Limited Warranty
To the original purchaser only: FAAC International, Inc., warrants for the time period indicated in each product’s description (or product title page) from the date ofinvoice, the gate operator systems and other related systems and equipment manufactured by FAAC S.p.A. and distributed by FAAC International, Inc., to be freefrom defects in material and workmanship under normal use and service for which it was intended provided it has been properly installed and operated. FAACInternational, Inc.’s obligations under this warranty shall be limited to the repair or exchange of any part or parts manufactured by FAAC S.p.A. and distributed byFAAC International, Inc. Defective products must be returned to FAAC International, Inc., freight prepaid by purchaser, within the warranty period. Items returned willbe repaired or replaced, at FAAC International, Inc.’s option, upon an examination of the product by FAAC International, Inc., which discloses, to the satisfaction ofFAAC International, Inc., that the item is defective. FAAC International, Inc. will return the warranted item freight prepaid. The products manufactured by FAAC S.p.A.and distributed by FAAC International, Inc., are not warranted to meet the specific requirements, if any, of safety codes of any particular state, municipality, or otherjurisdiction, and neither FAAC S.p.A. nor FAAC International, Inc., assumes any risk or liability whatsoever resulting from the use thereof, whether used singly or incombination with other machines or apparatus.
Any products and parts not manufactured by FAAC S.p.A. and distributed by FAAC International, Inc., will carry only the warranty, if any, of the manufacturer. Thiswarranty shall not apply to any products or parts thereof which have been repaired or altered, without FAAC International, Inc.’s written consent, outside of FAACInternational, Inc.’s workshop or altered in any way so as, in the judgment of FAAC International, Inc. , to affect adversely the stability or reliability of the product(s) orhas been subject of misuse, negligence, or accident, or has not been operated in accordance with FAAC International, Inc.’s or FAAC S.p.A.’s instructions or has beenoperated under conditions more severe than, or otherwise exceeding, those set forth in the specifications for such product(s). Neither FAAC S.p.A. nor FAACInternational, Inc., shall be liable for any loss or damage whatsoever resulting, directly or indirectly, from the use or loss of use of the product(s). Without limiting theforegoing, this exclusion from liability embraces a purchaser’s expenses for downtime or for making up downtime, damages for which the purchaser may be liable toother persons, damage to property, and injury to or death of any persons. Neither FAAC S.p.A. nor FAAC International, Inc., assumes nor authorizes any person toassume for them any other liability in connection with the sale or use of the products of FAAC S.p.A. or FAAC International, Inc. The warranty hereinabove set forthshall not be deemed to cover maintenance parts, including, but not limited to hydraulic oil, filters, or the like. No agreement to replace or repair shall constitute anadmission by FAAC S.p.A. or FAAC International, Inc., of any legal responsibility to effect such replacement to make such repair, or otherwise. This limited warrantyextends only to wholesale customers who buy directly through FAAC International, Inc.’s normal distribution channels. FAAC International, Inc., does not warrant itsproducts to end consumers. Consumers must inquire from their selling dealer as to the nature and extent of that dealer’s warranty, if any.
This warranty is expressly in lieu of all other warranties expressed or implied including the warranties of merchantability and fitness for use. This warranty shall notapply to products or any part thereof which have been subject to accident, negligence, alteration, abuse, or misuse or if damage was due to improper installation oruse of improper power source, or if damage was caused by fire, flood, lightning, electrical power surge, explosion, wind storm, hail, aircraft or vehicles, vandalism, riotor civil commotion, or acts of God.
Terms of Sale
Important NoticePrices shown in this list are based on the availability of items when the price list was printed. Prices are subject to change without notice. A minimum billing charge of$25.00 net plus shipping cost will be billed for all orders received. Whenever possible, we suggest that you combine orders for all parts to surpass the minimum cost.Product delivery time is subject to product availability. We are not responsible for any damages caused by a delay in shipping or product availability.
PricingAll quoted prices for products are discounted according to the list price provided in our most current pricing manual. Discounts quoted do not apply to special orderitems. Contact the factory for Dealer/Distributor pricing on special orders.
Credit TermsWe are pleased to offer one of the most generous discount terms available in the industry.
Our credit terms are net 30 days. Credit terms apply only to open accounts in good standing and only to merchandise. Balances remaining unpaid after the 30th dayare subject to a 1.75% per month finance charge. This is an annual cost to you of 21%. We compute the finance charge by applying the 1.75% rate to the amount ofthe invoice past due for every month it is past due. The balance of your account is determined by taking the balance you owed at the end of the previous billing cycleand subtracting all payments and credits received during the current billing cycle. Accounts past due forty-five (45) days will be placed on credit hold until the accountis brought up-to-date. Accounts over sixty (60) days past due that have no payment arrangements will be considered delinquent and subject to collection remedies.The dealer/distributor will be responsible for all collection expenses. A current signed credit application must be provided before an account is opened, subject to credit approval.
DeliveryAll prices are quoted F.O.B. our factory. The purchaser is obligated to submit claims for damages or shortages of freight directly to the freight carrier within 30 dayswhen due to carrier neglect.
Material Returned for Credit or RepairGoods may be returned for credit or exchange under certain conditions. You must contact the factory for instructions and an authorization number. Merchandise returned for credit must be current models, unused, and uninstalled - in new condition. Freight must be prepaid on all authorized returns to FAAC International, Inc. The repair or replacement of product and parts is subject to availability, and repair time is not guaranteed. We may have loaner operators available,and they are subject to rental charges. All damages to loaner operators are the responsibility of the Dealer/Distributor. Repaired or replaced parts carry a 90-day warranty. A 15% restocking charge will be applied to goods returned for credit. Goods returned for repair will be handled immediately when the following conditions exist:
1. Name and address of sender are enclosed with material.
2. The authorization number is clearly visible on the exterior of each package returned.
3. A brief description of the problem and the requested repair is included with the shipment.
We will not be responsible for poorly packaged equipment. Shipments of 70 lb or less should beshipped via United Parcel Service.
Headquarter & East Coast OperationsFAAC International Inc.5151 Sunbeam RoadSuites 9-11Jacksonville, Florida 32257Tel. 866 925 3222 Toll FreeTel. 904 448 8952Fax 904 448 8958
172
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:13 AM Page 172
82392FAACpl_2006_Full_pricelist_12-6-06_v3 1/11/13 9:10 AM Page 3
For a
n on
-goi
ng p
rodu
ct im
prov
emen
t, FA
AC S
pA re
serv
es th
e rig
ht to
mak
e te
chni
cal m
odifi
catio
ns w
ithou
t prio
r not
ice.
Al
l rig
hts
are
rese
rved
and
the
repr
oduc
tion,
in a
ny fo
rm o
r by
any
mea
ns, o
f the
who
le o
r any
par
t of t
his
publ
icat
ion,
is fo
rbid
den
with
out p
rior p
erm
issi
on o
f FAA
C Sp
A.
1,50
0 - 0
1.20
13
SUBSIDIARIES
AUSTRALIA
FAAC AUSTRALIA PTY LTDHomebush – Sydney, Australiatel. +61 2 87565644fax +61 2 87565677 www.faac.com.au
AUSTRIA
FAAC GMBHSalzburg, Austriatel. +43 662 8533950fax +43 662 85339525www.faac.at
FAAC TUBULAR MOTORStel. +49 30 56796645fax +49 30 [email protected]
BENELUX
FAAC BENELUX NV/SABrugge, Belgiumtel. +32 50 320202fax +32 50 320242www.faacbenelux.com
FAAC TUBULAR MOTORSSchaapweg 30NL-6063 BA Vlodrop, Netherlandstel. +31 475 406014fax +31 475 [email protected]
CHINA
FAAC SHANGHAIShanghai, Chinatel. +86 21 68182970fax +86 21 68182968www.faacgroup.cn
FRANCE
FAAC FRANCESaint Priest - Lyon, Francetel. +33 4 72218700fax +33 4 72218701www.faac.fr
FAAC FRANCE - AGENCE PARISMassy - Paris, Francetel. +33 1 69191620fax +33 1 69191621www.faac.fr
FAAC FRANCE - DEPARTEMENT VOLETSSaint Denis de Pile - Bordeaux, Francetel. +33 5 57551890fax +33 5 57742970www.faac.fr
GERMANY
FAAC GMBHFreilassing, Germanytel. +49 8654 49810fax +49 8654 498125www.faac.de
FAAC TUBULAR MOTORStel. +49 30 56796645fax +49 30 [email protected]
INDIA
FAAC INDIA PVT. LTDNoida – Delhi, Indiatel. +91 120 3934100/4199fax +91 120 4212132www.faacindia.com
IRELAND
NATIONAL AUTOMATION LTDCo. Roscommon, Irelandtel. +353 71 9663893fax: +353 71 9663890www.nal.ie
MIDDLE EAST
FAAC MIDDLE EAST FZEDubai Silicon Oasis Operation Center - Dubai, UAEtel. + 971 4 3724190fax+ 971 4 3724191www.faac.ae
NORDIC REGIONS
FAAC NORDIC ABPerstorp, Swedentel. +46 435 779500fax +46 435 779529www.faac.se
POLAND
FAAC POLSKA SP.ZO.OWarszawa, Polandtel. +48 22 8141422fax +48 22 8142024www.faac.pl
RUSSIA
FAAC RUSSIAMoscow, Russiawww.faac.ru
SPAIN
F.A.A.C. SASan Sebastián de los Reyes - Madrid, Spaintel. +34 91 6613112fax +34 91 6610050www.faac.es
SWITZERLAND
FAAC AGAltdorf, Switzerlandtel. +41 41 8713440fax + 41 41 8713484www.faac.ch
UNITED KINGDOM
FAAC UK LTD.Basingstoke - Hampshire, UKtel. +44 1256 318100fax +44 1256 318101www.faac.co.uk
U.S.A.
FAAC INTERNATIONAL INCJacksonville, FL - U.S.A.tel. +1 904 4488952 fax +1 904 4488958 FAAC INTERNATIONAL INCFullerton, California - U.S.A.tel. +1 714 446 9800fax +1 714 446 9898www.faacusa.com
HEADQUARTERS
ITALYFAAC SpAVia Calari 10 - 40069 Zola Predosa (BO)Tel. +39 051 61724 - Fax +39 051 [email protected] - www.faacgroup.com
Headquarter & East Coast OperationsFAAC International Inc.5151 Sunbeam RoadSuites 9-11Jacksonville, Florida 32257Tel. 866 925 3222 Toll FreeTel. 904 448 8952Fax 904 448 8958
West Coast OperationsFAAC International Inc.357 South Acacia AvenueUnit 357Fullerton, California 92831Tel. 800 221 8278 Toll FreeTel. 714 446 9800Fax 714 446 9898