7/27/2019 FA11_SlouchBag

1/3

eSLOUCH BAGUPPER LINING

cut 2 contrast 2

SLOUCH BAG

1a 1b

byMARTHA MCQUADEProject photo on page 39; instructions

on page 71 of Winter 2008nameskirt

INTERWEAVE PRESS LLC

Not to be reprinted. All rights reserved.

Please respect the copyright by not

forwarding or distributing this document interweavestitch.comPAGE 1 OF 3

SUMMER 2011

Project photo on page 47; instructions

on page 98 of Stitch Fall 2011.bagslouch

PATTERN

REPLACEMEN

T

by CHERYL KUCZEK

FALL 2011

slouch bag

upper lining

NOTESWhen preparing to print templates,make sure that you are printing at 100% andthat there is no scaling. Check the settings forpage scaling (should be None) and check thepreview to make sure that you will be printing atfull size. Make sure that the box labeled Auto-Rotate and Center is unchecked (instructionsapply specifically to Adobe Reader; if using an-

other PDF reader, check for similar settings).

To ensure that thetemplate has printed atthe correct scale, checkthe size of the TESTSQUARE. The TestSquare should be 1" 1" (2.5 2.5 cm).

TESTSQUARE

1" 1"[2.5 2.5 CM]

Please note: Due to the close placementto the perforation on the Fall 2011 pat-tern insert, this pattern piece was cut off.This is the complete pattern piece. Forproject instructions and the remainingpattern pieces, please reference the Fall

2011 issue.

7/27/2019 FA11_SlouchBag

2/3

7/27/2019 FA11_SlouchBag

3/3

eSLOUCH BAGUPPER LINING

cut 2 contrast 2

1b