f7d4302 router manual

8/12/2019 f7d4302 router manual

1/39

PlayWIRELESS ROUTER

User ManualF7D4302 8820-00380


2/39

TABLE OF CONTENTS

Regulatory Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

FCC Statement. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Whats in the Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Initial Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1Advanced Tools & Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6The Belkin Router Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7Manual Setup Using Your Browser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8Adding Computers to Your Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9Adding USB Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11Bundled Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14Additional Capabilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Getting to Know Your Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17Back Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Technical Details . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Technical Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19S y s t e m R e q u i r e m e n t s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 0

Troubleshooting, Support , and Warranty . . . . . . . . . . . . . . . . . . . 22

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22Technical Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31Belkin International, Inc., Limited 2-Year Product Warranty. . . . . . . . . 32


3/39

1

Whats in the Box

Play Wireless Router

Ethernet cable (attached to router)

Power supply (attached to router)

Network information card (attached to router)

Belkin Setup CD with User Manual

Initial Setup

Where to Place Your Router

For the best results, place the Router next to your modem inan open location away from large metal objects and magnetssuch as those found in speakers. Raising the Router abovefloor level can improve the strength of your wireless signal.

GETTING STARTED


4/39

2

GETTING STARTED

2 3

modem

1

How to Set It Up


5/39

3

GETTING STARTED

1.Connect your Routers Ethernet cable to your modems Ethernetport (on the back of your modem). This port might be labeleddifferently on your particular modem. If you are adding a

Router for the first time, this port may be connected to yourcomputer by an Ethernet cable. It is OK to disconnect yourcomputer and plug the Router into the modem instead.

2. Plug the Routers power supply into a wall outlet.

3.Put the CD into your computer. If the CD doesntopen automatically, please browse to your CD driveand double-click on the Belkin Setup CD icon.

4.Click the Setup icon on the CD menu.

Setup


6/39

4

GETTING STARTED

5.After a brief installation, the setup software will ask youfor the network name and password from the networkinformation card that is attached to your Router. Store the

card under the base of your Router for future reference.


7/39

5

GETTING STARTED

6.A progress screen will appear while additional software isinstalled. This may take a few minutes to complete. Oncefinished, a Success message will appear indicating that you

are connected to the Internet via your new Belkin Router.

During setup you may be asked for additional information.

You may need to enter a username and password providedby your ISP. This username and password is likely to befound on materials that came from your ISP when yousigned up for service. If necessary, you may need to contactyour ISP to retrieve your username and password.

If you have a static IP address, you may need to enteradditional information also provided by your ISP.

If your computer doesnt have a wireless adapter, or thesetup software is unable to control it, you may be asked toconnect your computer to the Router with a network cable.


8/39

6

GETTING STARTED

Advanced Tools & Settings

After the initial setup is complete, you have the option tochange settings like your network name, security type, andpassword. To make these changes and others, click on theAdvanced Tools icon at the CD Setup menu and select oneof the following settings that you would like to change:

Network Name & Security Personalize your network name(SSID), password, and strength of wireless security.

Internet Service Provider & Login Settings Haveyou moved or changed Internet Service Providers?If youd like to change these settings without running

through the setup process again, this is the place.


9/39

7

GETTING STARTED

The Belkin Router Manager

Belkin.2234

Router Settings

User Manual

USB Print & Storage Manager

Memory Safe: Get Started!

Daily DJ: Get Started!

Music Labeler

Check for Updates

Options

Exit

The Belkin Router Manager appears in your system tray(Windows) or menu bar (Mac). Its icon indicates the currentstatus of your Router and also allows you to access yourRouters settings to make changes. It also provides quickaccess to software that came bundled with your Router.

To access the Router settings, click on the iconand select from the menu that appears.

The status of your Router is shown by the Belkin Router Managericon, which closely mimics the light on the front of the Router.

Green:You are connected to your Belkin Router

and it is connected to the Internet.Amber:You are connected to your Belkin Router,but it is not connected to the Internet.


10/39

8

GETTING STARTED

In your browser, type http://router (you do not need to typein anything else such as www). Then press the Enter key. Ifyoure still having trouble running the manual setup option, type192.168.2.1 in your browser (you do not need to type in anythingelse such as http:// or ww w). Then press the Enter key.

Manual Setup Using Your Browser


11/39


12/39

10

GETTING STARTED

Manually

If you choose not to use the included Setup CD for

adding additional computers or wireless devices, youcan manually add these items to your network.

1.Locate the wireless-network-connections optionon your computer or wireless device.

2. Select your Belkin Router from the list of available networks. Youcan identify your Belkin Router by locating the network name(SSID) from the card located underneath the foot of your Router.

3.Enter your network password (located onyour network information card).

Your wireless device will take a few moments to connect to yournetwork. If the connection is not made the first time, try thisprocess again. If you still have difficulty connecting to your networkafter trying this process a few times, see the Troubleshootingsection in this manual for help with connecting to your network.

Note:In some cases you may be prompted to select thesecurity type. It is printed on the card for your convenience.

Using the WPS Button

1.Start WPS Push Button Connection (WPS PBC) on your

computer or other Wi-Fi device that you would like to connectwirelessly to your Router. Often there will be a button for thispurpose in software that came with the device, or a physicalWPS, PBC, or Security button on the device itself.

2. Within two minutes, press the WPS button on your Router.

The WPS light (small light above WPS button) will blink green whileit listens for your Wi-Fi device. Once a connection is established, thelight will turn green and then go out. If a connection is not established,the light will blink amber. You may repeat the process to try again.

You can repeat this process for each WPS-enableddevice youd like to add to your network.


13/39

11

GETTING STARTED

Adding USB Devices

USB


14/39

12

GETTING STARTED

Adding a Drive

You can share a USB hard drive or flash drive to your network via

your Routers USB port. Once connected, you can share files andmusic with other computers and devices within your network.

Plug your USB hard drive into the USB port on the backof your Router. When the light above the USB port is lit,your drive is available to computers on your network.

You can manually check the status of your shared drive by visitingthe USB Print and Storage Manager, found under the Belkin RouterManager icon displayed in your system tray (Windows) or menubar (Mac). If you have difficulty sharing a drive on your network,please see the Troubleshooting section of this manual.

Adding a Printer

You can add a printer to your network via your Routers

USB port. Once connected, you can print from variouscomputers and wireless devices within your net work.

Plug your printers USB cable into the USB port located onthe back of your Router. When the light above the USB port islit, your printer is available to computers on your network.

You can manually check the status of your printer by visiting theUSB Print and Storage Manager, found under the Belkin RouterManager icon displayed in your system tray (Windows) or menubar (Mac). If you have difficulty sharing a printer on your network,please see the Troubleshooting section of this manual.

Note:Each computer that will use the printer must haveboth the Belkin software and the printers driver installed.If the print driver is not installed, you will be asked to installit by the Belkin USB Print and Storage Manager.


15/39

13

GETTING STARTED

Adding Other USB Devices

Other USB devices may also be shared via your Router.

Plug your device into the USB port located on the back ofyour Router. When the light above the USB port is lit, yourdevice is available to computers on your network.

Computers running the Belkin USB Print and Storage Manager willbe able to make use of the shared device by visiting the USB Printand Storage Manager, found under the Belkin Router Managericon displayed in your system tray (Windows) or menu bar (Mac).


16/39

14

GETTING STARTED

Bundled Software

USB Print and Storage Manager

The USB Print and Storage Manager helps to manage andmonitor the use of your USB printers, scanners, hard drives,and other devices that are connected to your Routers USBport and shared across your network. USB Print and StorageManager is found in the Belkin Router Manager icon displayedin your system tray (Windows) or menu bar (Mac).

When you have one or more USB devices attached to yourRouter, the main actions for those devices are availabledirectly from the Belkin Router Monitor menu.

Memory Safe

Memory Safe allows you to set up a routine backup of your

files to a hard drive or flash drive attached to your Router.Memory Safe is found in the Belkin Router Manager icondisplayed in your system tray (Windows) or menu bar (Mac).

Music Labeler

Belkin Music Labeler corrects metadata (track names, artistnames, track numbers, etc.) in your iTunes and Windows Medialibraries, making it easy to find the music you are looking for.Music Labeler is found under the Belkin Router Manager icon

displayed in your system tray (Windows) or menu bar (Mac).


17/39

15

GETTING STARTED

Daily DJ

Belkin Daily DJ delivers personalized playlists from yourmusic collection, automatically, every day. Its like having yourown personal DJ playing the songs that you want to hear. Itworks great with iTunes and Windows Media Player. DailyDJ is found under the Belkin Router Manager icon displayedin your system tray (Windows) or menu bar (Mac).


18/39

16

GETTING STARTED

Additional Capabilities

Guest Access

You can allow guests to use your Internet connection withoutjoi nin g your per son al net work. The n etwork n ame andpassword for the guest network is located on the networkinformation card found under the foot of your Router.

A person using your guest network will be able to joinwithout a password, but will be shown a login page whenthey attempt to surf the Web. They will need to enterthe guest password into this page to continue.

Video Max

Video Max automatically prioritizes your network traffic toensure high-quality streaming video, VoIP calls, and games.

Music Mover

Music Mover sends music from a USB drive attached to yourRouter to any UPnP (Universal Plug-and-Play) or DLNA-compatibledevice on your network. T hese devices include certain gamingsystems, televisions, Blu-ray players, and cell phones.


19/39

17

GETTING TO KNOW YOUR ROUTER

A) Router Status Light

Your Routers status is shown by the light on the front.

Off:The Router is not plugged into a power source.

Blinking Green:The Router is starting up.

Solid Green:The Router is connected to the Internet.

Blinking Amber:The Router cant detect the modem. Either themodem is off, is not plugged into the Router, or is unresponsive.

B) Wi-Fi Protected Setup (WPS) Light and Button

The WPS button on the front of your Router can be used tohelp establish a secure connection between your Router andother WPS-enabled Wi-Fi devices such as computers. To usethe WPS feature on your Router, see Getting Started > AddingComputers to Your Network > Using the WPS Button.

The small light near the WPS button shows what is happeningwhile you are using WPS to establish a connection.

Off:Idle

Blinking Green:The Router is listening for aWPS-enabled computer or other device.

Solid Green:The Router has made a secureconnection with the computer or other device.

Amber:A connection was not created.

Front Panel

(a)

(b)


20/39

18

GETTING TO KNOW YOUR ROUTER

A) Modem (WAN) Connector

Connect your modem to thisport using an Ethernet cable.

B) Wired (LAN) Connectors

Connect computers and otherwired network devices to theseports using Ethernet cables.

C) USB Port

USB printers, disks, and otherUSB devices plugged into thisport will be shared on yournetwork. Each USB port has alight that indicates its status.

Off:No USB device isconnected or the attachedUSB device is not in use.

Blinking:Please wait tounplug the device untilthe light turns off.

On: The USB device isconnected and beingshared on your network.

D) Reset Button

This button is used to restartyour Router in rare cases when itfunctions incorrectly. Resettingthe Router will preserve yoursettings. This button may alsobe used to restore the factorydefault settings. Please seethe Troubleshooting sectionfor more information.

E) Power Connector

Connect the included powersupply to this jack.

Back Panel

(a)

(b)

(c)

(d)

(e)


21/39

19

TECHNICAL DETAILS

Technical Features

Integrated 802.11n Wireless Access PointUtilizing Dual-Band Network technology, your Routercreates two separate networks (one at 2.4GHz band andthe other at 5GHz band), allowing increased bandwidth toall your connected wireless devices and computers.

NAT IP Address Sharing

To save you the cost of adding IP addresses percomputer in your house, your Belkin Router uses NetworkAddress Translation (NAT) technology, allowing you toshare a single IP address across your network.

SPI Firewall

Your Router is equipped with a firewall that will protect yournetwork from a wide array of common attacks and viruses.

Universal Plug-and-Play (UPnP) Compatibility

The UPnP (Universal Plug-and-Play) feature in your Routeroffers seamless operation of voice and video messaging,

games, and other applications that are UPnP-compliant.

Web-Based Advanced User Interface

You can easily make changes to your Routers advancedsettings through your web browser. These changes canbe made from any computer on your network.

Belkin Router Monitor

The Belkin Router Monitor application helps you to monitoryour Routers status and change network settings.

Integrated 4-Port 10/100 Switch

Your Router has a built-in, 4-port network switch toallow your wired computers to share: printers, data,MP3 files, digital photos, and much more.

USB Port

The USB port lets you plug in printers, hard drives, andother USB devices to share across your network.


22/39

20

TECHNICAL DETAILS

System Requirements

Router

Broadband Internet connection such as a cable orDSL modem with RJ45 (Ethernet) connection

At least one computer with an installed network interface adapter

TCP/IP networking protocol installed on each computer

RJ45 Ethernet networking cable

Internet browser

Setup Software

A computer running WindowsXP SP2 or higher,Windows Vista, or Windows 7; or Mac OS X v10.x

Minimum 1GHz processor and 256MB RAM

600MB of free hard-drive space for installation

Memory Safe and USB Print and Storage Manager

Windows XP SP2 or higher or WindowsVista; or Mac OS X v10.4 or later

Minimum 1GHz processor and 256MB RAM



23/39

21

TECHNICAL DETAILS

Daily DJ and Music Labeler

PC

Windows XP SP2 or higher, Windows Vista, or Windows 7

2GHz processor

1GB of RAM

DirectX9.0-compliant video and sound

Internet Exploreror Firefox

Mac

Mac OS X v10.4.8 or later

IntelCore Duo 1.83GHz or higher processor

1GB of RAM

Safarior Firefox



24/39

22

TROUBLESHOOTING, SUPPORT, AND WARRANTY

Troubleshooting

The Setup CD does not automatically start.

If Belkin Setup does not run when you insert the CD-ROM, yourcomputer may not be configured to open CDs automatically.

If Belkin Setup does not appear within 15 seconds, browseto your CD-ROM drive and open the Belkin Setup icon.Alternatively, you may visit http://router/and perform thesetup manually. Please see Manual Setup Using YourBrowser earlier in this manual for more information.

Belkin Setup cannot find my Router.

If Belkin Setup is not able to communicate with your Router duringthe installation process, please check the following items.

1.Make sure that the wireless hardware on yourcomputer is turned on, if available.

2. Try connecting your computer to one of the four wiredports on the Router with an Ethernet cable.

3.Ensure that the Router is on. The front-panel light should be on.

4.Unplug the Routers power supply for 10seconds, then plug it back in.

5.There may be firewall software on your computer preventingan outgoing connection. You may choose to temporarilydisable this software before attempting setup.

If Belkin Setup still cannot find the Router, you might chooseto do a manual setup. Refer to Manually ConfiguringNetwork Settings in this manual for details.


25/39

23


Belkin Setup cannot connect my Router to the Internet.

If Belkin Setup is not able to connect the Router tothe Internet, please check the following items:

1.Use the troubleshooting suggestions within Belkin Setup.

2. If your ISP requires a user name and password, make sure thatyou have typed in your user name and password correctly. Someuser names require that the ISPs domain may be at the end of thename. Example: [email protected]. The @myisp.com part ofthe user name may need to be typed as well as your user name.

3.If you continue to have no Internet connection, referto Manually Configuring Network Settings in this

manual for an alternative setup method.

Belkin Setup completed installation, but I cannot browse theWeb. The light on the front of my Router is blinking amber.

1.Make sure the Router is connected to your modem with anEthernet cable via the Routers one WAN (modem) port.

2. Unplug the modem from its power source and make surethat it goes dark. Then reapply power to the modem.

3.Unplug your Routers power supply, wait 10 seconds,and plug it back in. This will cause the Router to tryto reestablish communication with the modem.


26/39

24


Belkin Setup completed installation, but I cannot browse theWeb. The light on the front of my Router is solid amber.

1.Use the troubleshooting suggestions within Belkin Setup.

2. If your ISP requires a user name and password, make sure thatyou have typed in your user name and password correctly. Someuser names require that the ISPs domain may be at the end of thename. Example: [email protected]. The @myisp.com part ofthe user name may need to be typed as well as your user name.

3.If you have a static connection, your ISP will haveassigned you an IP address, subnet mask, and gatewayaddress. Please re-run Belkin Setup and enter thisinformation when a static connection is mentioned.

4.You may need to configure your Router to meetthe specific requirements of your ISP. To searchour knowledge base for ISP-specific issues, go to:http://www.belkin.com/supportand type in ISP.

5.If you continue to have no Internet connection, referto Manually Configuring Network Settings in thismanual for an alternative setup method.

I cant connect to the Internet wirelessly.

If the light on the front of the Router is solid green, then yourRouter is connected to the Internet. You may not be connectedto the Routers wireless network. Please refer to AddingComputers to Your Network in this manual for instructions.


27/39

25


I cant connect to the Internet wirelessly and mynetwork name is not listed in Available Networks.

1.Verify that your Router is on and thefront-panel light shows solid green.

2. If you are far from the Router, you might try movingcloser to see if you might have been out of range.

3.Using a computer attached to the Router via a network cable,visit http://router/and ensure that Broadcast SSID is ON.This setting is found on the Channel and SSID page.

My wireless network performance is slow, inconsistent,suffers from weak signal, or Im having diff iculty maintaining aVPN connection.

Wireless technology is radio-based, which means connectivityand the throughput per formance between devicesdecreases when the distance between devices increases.Other factors that will cause signal degradation (metal isgenerally the worst culprit) are obstructions such as wallsand metal appliances. Note also that connection speed maydecrease as you move farther away from the Router.

In order to determine if wireless issues are related torange, we suggest temporarily moving the computerwithin 10 feet from the Router if possible.

Changing the wireless channelDepending on localwireless traffic and interference, switching the wirelesschannel of your network can improve performance andreliability. See the section titled Changing the WirelessChannel for instructions on how to choose other channels.


28/39

26


Ive installed this new Router and some of my network clients(computers, game consoles, etc.) are now unable to connect.

Your new Router came pre-configured with a network name andpassword, found printed on an attached card. All clients must use thisnetwork name and password to connect wirelessly to your Router.You will need to find the network settings on your client, select thenetwork name printed on the card from the list of available networks,and enter the password when prompted to join the wireless network.

Limiting the wireless transmit rateLimiting the wireless transmitrate can help improve range and connection stability. Most wirelesscards have the ability to limit the transmission rate. To change thisproperty in Windows, go to the Windows Control Panel, open NetworkConnections, and double-click on your wireless cards connection. Inthe properties dialog, select the Configure button on the Generaltab, then choose the Advanced tab and select the rate property.

Wireless client cards are usually set to automatically adjustthe wireless transmit rate for you, but doing so can causeperiodic disconnects when the wireless signal is too weak; asa rule, slower transmission rates are more stable. Experimentwith different connection rates until you find the best onefor your environment. Note that all available transmissionrates should be acceptable for browsing the Internet. Formore assistance, see your wireless cards user manual.


29/39

27


Does the Router support WirelessProtected Access (WPA) security?

The Router ships with WPA/WPA2 security turned on.Windows XP and some older network hardware mayrequire a software update to support WPA/WPA2.

I am having difficulty setting up WPA security on my Router.

1.Log in to your Router by visiting http://router/with your web browser.Click on the Login button in the top right-hand corner of thescreen. You will be asked to enter your password. If you have neverset a password, leave the Password field blank and click Submit.

2. Click Wireless in the left-hand menu. Thenclick Security just below that.

3.Select the WPA/WPA2 option.

4.Enter a password. This can be from 863 characters of your choice,including spaces and punctuation, OR a 64-digit hexadecimalnumber (using only the numbers 09 and letters AF).

5.Click Apply Changes to finish. Your wirelessconnection is now encrypted. Each computer using yourwireless network will need to use the new key.

Note:If you are configuring the Router over a wirelessconnection, you will have to re-connect to theRouter after changing any security set tings.

Note:Some older networking hardware supportsonly WEP encryption. If your older computers cannotconnect to your network, try 128-bit or 64-bit WEP, orseek software updates from their manufacturers.


30/39

28


I am having difficulty setting up Wired EquivalentPrivacy (WEP) security on my Router.

1.Log in to your Router. Visit http://router/with your web browser.Click on the Login button in the top right-hand corner of thescreen. You will be asked to enter your password. If you have neverset a password, leave the Password field blank and click Submit.

2. Click Wireless in the left-hand menu. Thenclick Security just below that.

3.Select the 128-bit WEP option.

4.You may type in a WEP key manually, or generate one froma passphrase. Type a phrase in the Passphrase field andclick the Generate button. A WEP key is composed of 26hexadecimal digits (09, AF.. For example, C3 03 0F AF4B B2 C3 D4 4B C3 D4 EE 74 is a valid 128-bit WEP key.

5.Click Apply Changes to finish. Your wirelessactivity is now encrypted. Each computer using yourwireless network will need to use the new key.

Note:If you are configuring the Router over a wirelessconnection, you will have to re-connect to theRouter after changing any security set tings.

Note:Some older networking hardware supportsonly 64-bit WEP encryption. If your older computerscannot connect to your network, try 64-bit WEP.


31/39

29


A disk I plugged into the USB port is not showingup on my computer or in Memory Safe.

1.Is the light on over the USB port that the disk is plugged into?

If not, try unplugging and re-plugging the disk. Please checkthat the USB connector is firmly plugged into the Router.

2. If your disk has an optional power supply, please useit while the disk is attached to your Router.

3.The Router supports FAT16, FAT32-, or NTFS-formatteddisks. Disks in other formats will not appear in theFinder (Mac OS X) or Windows Internet Explorer.

A printer I plugged into the USB port isnot showing up on my computer.

1.Is the light on over the USB port that the printer is plugged into?

If not, try unplugging and re-plugging the printer. Please checkthat the USB connector is firmly plugged into the Router.

2. To print to a printer attached to the Router, yourcomputer must have that printers driver installed.Please check that the driver is installed.

3.The printer may not be set to auto-connect. Via the Belkin RouterManager, open the USB Print and Storage Center. Check that theprinter appears in the list of available devices. View the propertiesof the printer, and check that auto-connect is selected.


32/39

30


A different sort of USB device that I plugged into theUSB port is not showing up on my computer.

Most USB devices other than disks and printers must be

accessed via the USB Print and Storage Center.

1.Is the light on over the USB port that the device is plugged into?If not, try unplugging and re-plugging the device. Please checkthat the USB connector is firmly plugged into the Router.

2. Via the Belkin Router Manager, open the USBPrint and Storage Center. Check that the deviceappears in the list of available devices.

3.Select the device and click the Use button. The device will bevirtually connected to your computer until you choose to StopUsing the device, or another person requests use of the device.


33/39

31


Technical Support

US

http://www.belkin.com/support

UK

http://www.belkin.com/uk/support

Australia

http://www.belkin.com/au/support

New Zealand

http://www.belkin.com/au/support

Singapore

65 62218850

Europe

http://www.belkin.com/uk/support


34/39

32


Belkin International, Inc., Limited2-Year Product Warranty

What this warranty covers.

Belkin International, Inc. (Belkin) warrants to the originalpurchaser of this Belkin product that the product shall be freeof defects in design, assembly, material, or workmanship.

What the period of coverage is.

Belkin warrants the Belkin product for two years.

What will we do to correct problems?

Product Warranty.

Belkin will repair or replace, at its option, any defective productfree of charge (except for shipping charges for the product).Belkin reserves the right to discontinue any of its products withoutnotice, and disclaims any limited warranty to repair or replace anysuch discontinued products. In the event that Belkin is unable torepair or replace the product (for example, because it has beendiscontinued), Belkin will offer either a refund or a credit towardthe purchase of another product from Belkin.com in an amountequal to the purchase price of the product as evidenced on theoriginal purchase receipt as discounted by its natural use.

What is not covered by this warranty?

All above warranties are null and void if the Belkin product isnot provided to Belkin for inspection upon Belkins requestat the sole expense of the purchaser, or if Belkin determinesthat the Belkin product has been improperly installed, alteredin any way, or tampered with. The Belkin Product Warrantydoes not protect against acts of God such as flood, lightning,earthquake, war, vandalism, theft, normal-use wear and tear,erosion, depletion, obsolescence, abuse, damage due to lowvoltage disturbances (i.e. brownouts or sags), non-authorizedprogram, or system equipment modification or alteration.


35/39

33


How to get service.

To get service for your Belkin product youmust take the following steps:

1.Contact Belkin International, Inc., at 12045 WaterfrontDrive, Los Angeles, CA 90094, Attn: Customer Service,or call (800)-223-5546, within 15 days of the Occurrence.Be prepared to provide the following information:

a. The part number of the Belkin product.

b. Where you purchase d the product.

c. When you purchase d the product.

d. Copy of original receipt.

2. Your Belkin Customer Service Representative will then

instruct you on how to forward your receipt and Belkinproduct and how to proceed with your claim.

Belkin reserves the right to review the damaged Belkin product.All costs of shipping the Belkin product to Belkin for inspectionshall be borne solely by the purchaser. If Belkin determines,in its sole discretion, that it is impractical to ship the damaged

equipment to Belkin, Belkin may designate, in its sole discretion,an equipment repair facility to inspect and estimate the cost torepair such equipment. The cost, if any, of shipping the equipmentto and from such repair facility and of such estimate shall beborne solely by the purchaser. Damaged equipment must remainavailable for inspection until the claim is finalized. Wheneverclaims are settled, Belkin reserves the right to be subrogatedunder any existing insurance policies the purchaser may have.


36/39

34


How state law relates to the warranty.

THIS WARRANTY CONTAINS THE SOLE WARRANTY OFBELKIN. THERE ARE NO OTHER WARRANTIES, EXPRESSEDOR, EXCEPT AS REQUIRED BY LAW, IMPLIED, INCLUDINGTHE IMPLIED WARRANTY OR CONDITION OF QUALITY,MERCHANTABILITY OR FITNESS FOR A PARTICULARPURPOSE, AND SUCH IMPLIED WARRANTIES, IF ANY, ARELIMITED IN DURATION TO THE TERM OF THIS WARRANTY.

Some states do not allow limitations on how long an impliedwarranty lasts, so the above limitations may not apply to you.

IN NO EVENT SHALL BELKIN BE LIABLE FOR INCIDENTAL,SPECIAL, DIRECT, INDIRECT, CONSEQUENTIAL ORMULTIPLE DAMAGES SUCH AS, BUT NOT LIMI TED TO,

LOST BUSINESS OR PROFITS ARISING OUT OF THESALE OR USE OF ANY BELKIN PRODUCT, EVEN IFADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

This warranty gives you specific legal rights, and you may also haveother rights, which may vary from state to state. Some states donot allow the exclusion or limitation of incidental, consequential,or other damages, so the above limitations may not apply to you.


37/39

35

REGULATORY INFORMATION

FCC Statement

DECLARATION OF CONFORMITY WITH FCC RULES

FOR ELECTROMAGNETIC COMPATIBILITYWe, Belkin International, Inc., of 12045 Waterfront Drive, Los Angeles,CA 90094, declare under our sole responsibility that the device, ,F7D4302 v1,complies with Part 15 of the FCC Rules. Operation issubject to the following two conditions: (1) this device may not causeharmful interference, and (2) this device must accept any interferencereceived, including interference that may cause undesired operation.

Caution: Exposure to Radio Frequency Radiation.

The device shall be used in such a manner that the potentialfor human contact normal operation is minimized

This equipment complies with FCC radiation exposurelimits set forth for an uncontrolled environment. Thisequipment should be installed and operated with a minimumdistance of 20cm between the radiator and your body.

Federal Communications Commission Notice

This equipment has been tested and found to comply with thelimits for a Class B digital device, pursuant to Part 15 of the FCCRules. These limits are designed to provide reasonable protectionagainst harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequencyenergy, and if not installed and used in accordance with theinstructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occurin a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determinedby turning the equipment off and on, the user is encouraged to try andcorrect the interference by one or more of the following measures:

Reorient or relocate the receivin g antenna. Increas e the distanc e between the equipment and the receiver.

Connect the equipment to an outlet on a circuit differentfrom that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Any changes or modifications not expresslyapproved by the party responsible for compliance couldvoid the users authority to operate this equipment.

This device and its antenna(s) must not be co-located oroperating in conjunction with any other antenna or transmitter.


38/39


39/39

2010 Belkin International, Inc. All rights reserved. All trade names are registered trademarks ofrespective manufacturers listed. Mac, Mac OS, and Safari are trademarks of Apple Inc., registered in theU.S. and other countries. Windows, Windows Vista, Internet Explorer, and DirectX are either registeredtrademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
http://www.belkin.com/

f7d4302 router manual

Documents

Transcript of f7d4302 router manual