Edition 03/2020. All rights reserved. Further versions can be found at www.feinmetall.com

F100Probe 100 milStandard

Series Tip-Ø

Spring Force (cN)

F100 06 B 150 G 100 L

Tip Style

Material Plating

Version

Material: B = BeCu, S = Steel

Tip-Ø: 150 = 1,50 mm (e.g.)

Plating: G = Gold plated, L = Longtime Gold plated

Version: L = Long version, IK = Insulation cap

Receptacle: Order Code according drawing

Probe series F100 is the most common probe for 100 mil centers. Further information about the receptacles see extra section for receptacle H100.

Spring Force (cN ±20%)Version Preload NominalStandard 30 60Standard 40 100Standard 80 150Standard 80 200Standard 150 300Standard 180 400H 70 150H 70 200H 100 300L 40 100L 80 150L 80 200L 150 300Mint-Pin 40 100Mint-Pin 80 150Mint-Pin 60 225

Travel (mm)Version Nominal MaximumStandard 4,3 6,4L 4,3 6,4Mint-Pin 4,3 6,4Pointing Accuracy ±0,08 mm

Materials and PlatingPlunger see tip styleBarrel Bronze, gold platedSpring Music wire, silver platedReceptacle Nickel silver, gold plated

AccessoriesInsertion tool receptacle FEWZ-100EVInsertion tool receptacle FEWZ-100E0Insertion tool probe FDWZ-100Plug lock H100VS

Tip Style Number Material ∅ in mm Plating Version

05 B 1,50 G -

06 B 1,30 G -

06 B 1,30 G H

06 B 1,50 G -

06 B 1,50 G H

06 B 1,50 G L

06 B 2,00 G -

06 B 2,50 G -

06 B 3,00 G -

06 B 3,10 G Mint-Pin

06 B 4,00 G -

07 S 1,50 L -

07 S 1,50 L H

11 B 0,50 G -

11 B 0,64 G -

11 B 0,90 G -

11 B 0,90 G H

11 B 0,90 G L

Centers (mm/mil) 2,54 / 100Current 5,0 AR typ 20 mOhm

Temperature -45°C...+100°C-45°C...+200°C (H)

Edition 03/2020. All rights reserved. Further versions can be found at www.feinmetall.com

Drill size (mm)Receptacle Press ring as stop 1,67 - 1,69Receptacle Press ring inserted 1,70 - 1,75

Projection Height (mm)(F100) H100.../10.0 8,4 - 18,4(F100) H100.../7.6 8,4 - 16,0(F100) H100.../2.0 8,4 - 10,4(F100) H100WW10/2.0S1 11,4 - 13,4(F100) H100WW10/2.0S2 16,4 - 18,4(F100...L) H100.../10.0 10,4 - 20,4(F100...L) H100.../7.6 10,4 - 18,0(F100...L) H100.../2.0 10,4 - 12,4(F100...L) H100WW10/2.0S1 13,4 - 15,4(F100...L) H100WW10/2.0S2 18,4 - 20,4

F100Probe 100 milStandard

Tip Style Number Material ∅ in mm Plating Version

12 B 1,50 G -

14 B 1,30 G -

14 B 1,50 G -

14 S 1,30 L -

14 S 1,30 L H

14 S 1,50 L H

14 S 1,50 L -

15 B 1,50 G -

15 B 1,50 G L

15 B 1,50 G H

15 B 1,70 G -

15 B 2,50 G H

17 B 1,50 G -

17 B 2,00 G -

17 B 2,00 G H

18 B 0,90 G -

21 S 0,90 L -

21 S 0,90 L L

30 B 0,90 G -

33 S 0,90 L -

33 S 0,90 L H

33 S 0,90 L L

35 S 1,50 L -

36 S 1,30 L -

36 S 1,30 L H

37 S 0,50 L -

38 S 0,90 L -

43 S 0,90 L -

53 S 0,90 L -

53 S 0,90 L L

55 B 1,80 G -

55 B 1,80 G H

55 B 1,80 G L

62 B 0,90 G -

62 B 0,90 G H

63 B 1,50 G -

Edition 03/2020. All rights reserved. Further versions can be found at www.feinmetall.com

Series Length of Wire Wrap Pin

H 100 WW 10 / 7.6

Connection Type

Press Ring Position

Connection Type: CR= Crimp connectionLA = Solder connectionWW = Wire Wrap connection WR = Round pinWL = Spring loaded connection LI = Stranded wire

Length of Wire Wrap Pin: e.g. 10 = 10,0 mm

Press Ring Position:e.g. 7.6 = 7,6 mm

H100Receptacle 100 mil

Materials and PlatingReceptacle Nickel silver, gold plated

AccessoriesInsertion tool, variable FEWZ-100EVInsertion tool, fix FEWZ-100E0Insertion tool, variable FEWZ-100Exx

Drill size (mm)Receptacle press ring as stop 1,67 - 1,69Receptacle press ring inserted 1,70 - 1,75

Projection Height (mm)(F100) H100.../10.0 8,4 - 18,4(F100) H100.../7.6 8,4 - 16,0(F100) H100.../2.0 8,4 - 10,4(F100) H100WW10/2.0S1 11,4 - 13,4(F100) H100WW10/2.0S2 16,4 - 18,4(F100...L) H100.../10.0 10,4 - 20,4(F100...L) H100.../7.6 10,4 - 18,0(F100...L) H100.../2.0 10,4 - 12,4(F100...L) H100WW10/2.0S1 13,4 - 15,4(F100...L) H100WW10/2.0S2 18,4 - 20,4

For probes F100, F588 and F585 different receptacles are available with different connection types (e.g. LA, CR, WW), different press ring positions (e.g. 2,0; 7,6; 10,0 mm) and different wire-wrap posts (10,0; 19,0 mm length).

Plug locks H100VS can be used to close empty receptacles in order to prevent false assemblies and to avoid contamina-tion.Die insulating sleeve H502IS can be also used for receptacle H100. The dimensions shown in (brackets) on the receptacle drawing are the possible respective insertion depths of the probes in the mounting receptacle. This results in the protrusion heights of the contact probes.

with spring loaded receptacle end